Professional Documents
Culture Documents
Combinorm: Centrifugal Pump According To en 733
Combinorm: Centrifugal Pump According To en 733
Industry
CombiNorm’s ample choice of shaft sealing options and its availability in several materials makes it a
very suitable pump for general purposes. Complying to EN 733 (DIN 24255), provided with industrial
standard gland packing or mechanical seals according to EN 12756 (DIN 24960) CombiNorm is always
the right pump.
Utility
Applications of the CombiNorm within utility buildings are as general duty pumps, circulation pumps in
heating systems and pumps in water purification plants.
Features and Benefits
Pump performance
• optimised volute design
• high efficiency Impeller back vanes
• smooth surfaces • flat cover for hydraulic balancing
• minimal internal losses • back vanes for hydraulic balancing
• extended bearing life
• keeps solids away from shaft sealing area
• circulation flow over mechanical seal
Material options
• available in cast iron, nodular cast iron
and bronze
• impellers available in cast iron, bronze
and stainless steel
• other material available upon request
• suitable for a wide range of
applications
Suction capabilities
• smooth suction entry in
pump casing
• smooth surface
• optimum NPSH
• anti rotation vane
• minimal flow distortion
giving better suction
capabilities
Pump casing
• flanges according to
ISO 7005 PN 10 / PN 16
• max. working pressure 1000 kPa (10 bar)
• wide range of applications
• large drain opening
• complete and fast draining of the casing
Pump cover
• flat gasket, fully chambered
• no gasket blow-out
• machined fits
• integrated stuffing box/
mechanical seal chamber
• perfect alignment of all
components
Shaft sealings
CombiNorm is available with the following shaft sealing configurations:
Gland packing options:
S2 S3 S4
Soft packing ring, shaft Soft packing ring, shaft Soft packing ring, shaft
sleeve sleeve, lantern ring sleeve, cooling jacket
120 [m]100
[m] 80
100 125-500
70
80-250 150-500
60 100-400
80 150-400
40-250 50
32-250 50-250 65-250 100-250 125-400
150B-400
80-400 200-400
40
60 15
0-3 25
30
0-3
50-315 65-315 15 0-3 15
65-200 30 15
40-315 80-315 125-315 200-315
50 25
32-200 40-200 50-200 80-200 100-200 80
100-315
300-250
-25
20 40-250 0
40 50 150-250 200-250
32-250 50-250 65-250 0-2 250-250
10 125-250
15
H 30 H
30
0-2
25-160 32-160 40-160 65-160 65-200
200-200
25
0-2 00
32-200 40-200 50-200 80-200 00
100-200
50-160 80-160 100-160 10 150-200
25
8 25-160 32-160 40-160 50-160 65-160 200-160
7 100-160
20 80-160 150-160
6
25-125 32-125 40-125 50-125 5
65-125
15
0-
10
12
15 25-125 32-125 40-125 50-125 65-125
0- 4
5
12
10
5
0-1
3
25
125-125
10
2
6 1
3 4 6 8 10 12 14 16 20 30 40 60 80 100 120 150 200 250 300 400 2 3 4 5 6 7 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500600 8001000 1500
Q [m /h]
3
Q [m3/h]
100 100
[m] [m] 80 100-400
80 125-400
65-200 60
150B-400
80-400
32-200 40-200 50-200 80-200 50 25
50-315 65-315 0-3
60 40
40-315 125-315 200-315 15
80-315 100-315
35 80
50 30
-25
0
40-250
25-160 32-160 40-160 50-160 65-160 25
32-250 50-250 65-250
0-2
50 150-250 200-250
250-250
10 125-250
40 200-200
20
H 80-160
H 15 32-200 40-200
50-200
65-200
80-200 100-200
25
0-2
00
150-200
30
25-160 32-160 40-160 50-160 65-160
25 10 100-160
80-160 150-160
5 6
25
100
5
-12
5
15 4 125-125
10 2
4 6 8 10 12 14 16 20 30 40 60 80 100 120 150 200 300 2 3 4 6 8 10 12 1416 20 30 40 60 80 100 150 200 300 400 600 8001000 1250
Q [m3/h]
Q [m3/h]
3600 rpm 1800 rpm
Subject to alterations
Bearing
The CombiNorm has 2 bearing arrangements:
1. two deep-groove ball bearings (grease lubricated “sealed for life”)
2. a double-row (two single – bearing group 4) angular contact ball bearing in combination with a roller
bearing
Both versions can be provided grease lubricated as well as oil lubricated.
2 2
2
1
adjustable
Grease lubrication
2 2
2
1
adjustable
Oil lubrication