Professional Documents
Culture Documents
2.0 CERTIFICATION/LISTINGS
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
victaulic.com
30.98 8745 Rev A Updated 05/2020 © 2020 Victaulic Company. All rights reserved.
1
victaulic.com
4.0 DIMENSIONS
E to E
30.98 8745 Rev A Updated 05/2020 © 2020 Victaulic Company. All rights reserved.
victaulic.com 2
victaulic.com
5.0 PERFORMANCE
The valve can be installed in any orientation, vertical or horizontal.
Be sure not to install the valve at any low point or at the bottom of the piping, where accumulated debris might enter
the valve and hamper correct functioning.
The valve will occasionally open to release over pressure, expelling water to the atmosphere. Where relevant, install
piping to direct the expelled water to a preferred drainage point.
NOTE
• Model FP 3HC is suitable for minimum flow fire pump applications, typically used as pump casing relief valve. For full-rated fire pump capacity discharge.
• See Model 43T or FP-730-UF Fire
Flow Chart
Series 867-3HC
psig barg
360
340 24
23
320 22
300 21
280 20
19
260 18
240 17
Inlet Pressure
16
220 15
200 14
180 13
12
160 11
140 10
9
120 8
100 7
80 65
60 4
40 3
2
20 1
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 m3/h
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 gpm
Discharge Flow Rate
5.1 PERFORMANCE
30.98 8745 Rev A Updated 05/2020 © 2020 Victaulic Company. All rights reserved.
victaulic.com 3
victaulic.com
6.0 NOTIFICATIONS
WARNING
• Always read and understand installation, care, and maintenance instructions, supplied with each box of
sprinklers, before proceeding with installation of any sprinklers.
• Always wear safety glasses and foot protection.
• Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products.
• Installation rules, especially those governing obstruction, must be strictly followed.
• Painting, plating, or any re-coating of sprinklers (other than that supplied by Victaulic) is not allowed.
Failure to follow these instructions could result in serious personal injury and/or property damage.
The owner is responsible for maintaining the fire protection system and devices in proper operating condition.
For minimum maintenance and inspection requirements, refer to the current National Fire Protection Association
pamphlet that describes care and maintenance of sprinkler systems. In addition, the authority having jurisdiction
may have additional maintenance, testing, and inspection requirements that must be followed.
If you need additional copies of this publication, or if you have any questions about the safe installation of this
product, contact Victaulic World Headquarters: P.O. Box 31, Easton, Pennsylvania 18044-0031 USA, Telephone:
001-610-559-3300.
30.98 8745 Rev A Updated 05/2020 © 2020 Victaulic Company. All rights reserved.
victaulic.com 4