Professional Documents
Culture Documents
SPECIFICATIONS
UPDATED: JULY 6, 2020
SPECIFICATIONS &
REQUIREMENTS SUMMARY
DIMENSIONS
WEIGHT
462 lbs
ELECTRICAL REQUIREMENTS
POWER OUTPUT
Mobius with Input Hopper, Output 77.5” L x 43” W x 46.5” H 458 lbs.
Chute and Trim Tote in place
Lid Assembly (includes tumbler, brush, lid 42” L x 14.75” W x 11.75” H 51 lbs.
screens and polycarbonate cap)
* Note, the M108S will fit through a standard 32” door opening
NOISE RATINGS
COMPONENT OPERATING RANGE RATING
Vacuum 1 – 11 77 – 92 decibels
Blades 1 – 11 82 – 88 decibels
Tumbler 1 – 11 70 – 72 decibels
TECHNICAL SPECIFICATIONS 3
* Note that, as most parts are asymmetrical, minimum packing dimensions have been provided.
Angle 0o – 6.5o
Aluminum Flat Plates & Sheet Metal Parts 5052 Aluminum Sheet Metal
Top Lid Screen & Separator Window Hardened & Coated Polycarbonate
(Lexan TM MR10)
TECHNICAL MANUAL 5
Vacuum Motor 5 HP
OR
Single Phase: 240V, 30 amps.
X Y G wires
The following is a summary of the sensor systems built into the M108S.
SENSOR FAULT
Input Hopper When not properly installed, machine remains in fault mode and will
not start up.
Output Chute When not properly installed, machine remains in fault mode and will
not start up.
Separator When not fully engaged, machine remains in fault mode and will
not start up.
Lid When not properly closed, machine remains in fault mode and will
not start up.
TECHNICAL MANUAL 7