These checklists provide general guidelines for maintaining boiler, electrical, and burner equipment. They outline tasks to complete daily, weekly/monthly, and yearly such as checking for leaks, testing safety functions, inspecting components, and ensuring free movement of valves and dampers. Users are instructed to also follow maintenance procedures specific to their individual plant equipment.
These checklists provide general guidelines for maintaining boiler, electrical, and burner equipment. They outline tasks to complete daily, weekly/monthly, and yearly such as checking for leaks, testing safety functions, inspecting components, and ensuring free movement of valves and dampers. Users are instructed to also follow maintenance procedures specific to their individual plant equipment.
These checklists provide general guidelines for maintaining boiler, electrical, and burner equipment. They outline tasks to complete daily, weekly/monthly, and yearly such as checking for leaks, testing safety functions, inspecting components, and ensuring free movement of valves and dampers. Users are instructed to also follow maintenance procedures specific to their individual plant equipment.
Check of feed and boiler water condition and Test signal lamps Check for leaks (oil and steam) adjust water treatment accordingly Check that electrical wiring is in good Check of combustion/flame Check of steam pressure and water level condition Check for leaks (steam and water) Weekly/Monthly Check and record flue gas temperature after Monthly depending on operational conditions and oil quality the boiler and/or draft loss across the boiler For computer and PLC installations: Check/clean ignition electrodes Power down the system and start again Monthly Check/clean nozzle/cup Check/clean filters Test of safety functions (not safety valves) T Yearly Check/clean air swirlers Test of stand by equipment Check that all connections are tight Check of boiler pressure gauges A thorough check of the conditions of Monthly Operate valves and dampers to ensure free electrical wiring and connections movement Test of safety functions T Where back-up batteries are present, check status of replacement frequency Test of stand-by equipment Yearly Check tightness of oil shut-off valves Operate valves and dampers to ensure free Inspection of water and gas side movement Inspection of refractory On rotary cup burners, check tension on Test of safety valves v-belts, grease bearings and check annulus refractory where applied