Professional Documents
Culture Documents
/2014
23/Dec./2015
Mixing ratio
(by Weight) Putty (gray) 100 *2-3% is preferable.
Hardener * (yellow) 1-3 In case of 1%, drying gets slower.
Remarks ・Make sure all exposed metal surfaces are clean, free from rust, oil, grease
or other contaminants by using proper abrasive paper and degreaser.
・Squeeze PUTTY YELLOW HARDENER tube sufficiently before using.
・Do not apply it directly on lacquer type basecoat.
・Excessive adding of PUTTY YELLOW HARDENER may cause slower drying time.
・Remove it by sanding before apply when recognized chalking, crack or
blister on old paint film.
・Close can lid tightly and immediately after use.
・Storage it cool and dark place.
1/1