Professional Documents
Culture Documents
IMPORTANT: Take care not to damage the slide IMPORTANT: Filter and orifice are mounted inside
surface of rotor (9) and plunger (6). of piston (13). Do not disassemble
them unless they are clogged or
9. Place casing (1) horizontally. Remove rotor (9), deformed. Disassemble them only
retainer (8), plate (7) and plungers (6) (9 used) when absolutely needed.
from shaft (4). If the inner parts need to be
replaced, replace them as an
10. Remove plates (10) (4 used), friction plates (11) assembly.
(3 used) from casing (1).
16. Remove piston (13) from casing (1) with pliers.
IMPORTANT: Take care not to damage the slide
surface of shoe plate (5).
17. Remove spring (14) and ball (15) from casing (1).
11. Remove shoe plate (5) from casing (1).
W2-6-33