Professional Documents
Culture Documents
01 EasyIO FC20 Series Installation V1.1
01 EasyIO FC20 Series Installation V1.1
FC20 Series
Installation Guide
1
EasyIO FC-20 – Installation Guide
th
17 Jan 2018
Updated disclaimer and support channel emails addresses
2
EasyIO FC-20 – Installation Guide
Disclaimer
Confidentiality Notice
The information contained in this document is confidential information of EasyIO Holdings Pte Ltd. Such
information and the software described herein, is furnished under a license agreement and may be used
only in accordance with that agreement.
The information contained in this document is provided solely for use by EasyIO Holdings Pte Ltd
employees, licensees, and system owners; and, except as permitted under the below copyright notice, is
not to be released to, or reproduced for, anyone else.
While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not
responsible for damages of any kind, including without limitation consequential damages, arising from
the application of the information contained herein. Information and specifications published here are
current as of the date of this publication and are subject to change without notice. The latest product
specifications can be found by contacting our corporate headquarters or support channel.
Trademark Notice
BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air-
Conditioning Engineers. All other product names and services, mentioned in this publication, that are
known to be trademarks, registered trademarks, or service marks are the property of their respective
owners.
Disclaimer
The material in this manual is for information purposes only. The contents and the product it
describes are subject to change without notice. EasyIO Holdings Pte Ltd makes no
representations or warranties with respect to this manual. In no event shall EasyIO Holdings Pte Ltd be
liable for any damages, direct or incidental, arising out of or related to the use of this manual.
3
EasyIO FC-20 – Installation Guide
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
4
EasyIO FC-20 – Installation Guide
Table of Contents
Introduction ....................................................................................................................................................6
Dimension .......................................................................................................................................................6
Physical Installation Instructions ....................................................................................................................8
Opening the Top Cover .................................................................................................................................11
Technical Support .........................................................................................................................................12
5
EasyIO FC-20 – Installation Guide
Introduction
This document provides the installation guide/mounting guide for the EasyIO FC-20 controller.
- In an area where excessive moisture, corrosive fumes or explosion vapors are present.
- Where excessive vibration or shock is likely occur
- Location where excessive electrical noise such as large magnetic interference or variable speed
drive modules
Dimension
Below are the dimensions of the device.
6
EasyIO FC-20 – Installation Guide
7
EasyIO FC20 – Installation Guide v1.1
Step 2
Use a screwdriver to unlock the 2 numbers of locking clips.
8
EasyIO FC20 – Installation Guide v1.1
Step 3
Position the EasyIO FC-20 on the DIN rail mount till it hooks over the top edge of the DIN rail.
Push the controller towards the bottom part of the DIN rail
Step 4
Press/flatten the EasyIO FC-20 to make sure the bottom of the base cover touches the enclosure base
plate.
Step 5
Use a screwdriver to lock the locking clips to secure the EasyIO FC-20 to the DIN rail.
9
EasyIO FC20 – Installation Guide v1.1
Step 6
To keep the assembly secures a DIN rail end clip can be use.
The EasyIO FC-20 comes with 2 mounting holes as optional mounting. Occasionally if DIN rail mounting is
not practical, you can use screws to mount the EasyIO FC-20 to an enclosure base plate.
10
EasyIO FC20 – Installation Guide v1.1
Step 2
Hold both end of the top cover to lift up the top cover. Occasionally a small flat head screw driver might
come handy in case the top cover stuck to the bottom cover.
11
EasyIO FC20 – Installation Guide v1.1
Technical Support
For technical issue, please contact
12