Professional Documents
Culture Documents
Lesson 3 - Project Settings
Lesson 3 - Project Settings
Email *
aegalaivan97@gmail.com
Correctly defining setup in your project is a crucial step, and any changes
should ideally be modified before you begin modeling. *
TRUE
FALSE
Drawing Presentation
General Presentation
You cannot change the column extension dimensions to pull from the top
column. *
True
False
https://docs.google.com/forms/d/e/1FAIpQLSc-Qx5xAxchYBcqgcgapoFYWTJJhlRYbdiJLXrUL8DBw1NW8A/viewscore?viewscore=AE0zAgDMLuSsau7atgyQTlRQh-fplGN6g0iXKFzybFnWwgHuRPdJ927VU4IciVXAH4dlD5o 1/3
7/11/2021 Lesson 3: Project Settings
Where do you change a bolt type to be a TC(Tension Control) bolt for the
entire project? *
Bolt Specifications
Washer Settings
Design Settings
True
False
TRUE
FALSE
Drawing Presentation
General Presentation
Line Weights
https://docs.google.com/forms/d/e/1FAIpQLSc-Qx5xAxchYBcqgcgapoFYWTJJhlRYbdiJLXrUL8DBw1NW8A/viewscore?viewscore=AE0zAgDMLuSsau7atgyQTlRQh-fplGN6g0iXKFzybFnWwgHuRPdJ927VU4IciVXAH4dlD5o 2/3
7/11/2021 Lesson 3: Project Settings
In which setup option do you set your baseplates to be weld all around (seal)
by default for your project? *
Design Settings
Steel Grades
True
False
To turn off the option to provide HSS wall reinforcement plates, you will go
to which setup window? *
Design Settings
This content is neither created nor endorsed by Google. - Terms of Service - Privacy Policy
Forms
https://docs.google.com/forms/d/e/1FAIpQLSc-Qx5xAxchYBcqgcgapoFYWTJJhlRYbdiJLXrUL8DBw1NW8A/viewscore?viewscore=AE0zAgDMLuSsau7atgyQTlRQh-fplGN6g0iXKFzybFnWwgHuRPdJ927VU4IciVXAH4dlD5o 3/3