1 Is it the methodology approved? 2 Is it the copy of approved drawing of bearings available at site? 3 Is it the Lot tested and reports available prior to use? 4 Is it the correct position of bearing marked on pedestal? 5 Is it the concrete surface clean and free from oil, grease, dust etc.? 6 Is it the bearing installed in correct position and within tolerance limit? 7 Is it the lower part of bearing properly shuttered before grouting? 8 Is it the grout material / vendor approved prior to use? 9 Is it the proper mixing and pouring arrangement as per manufacturer recommendation for grout at place? 10 has the area around bearing cleaned after grouting?