Professional Documents
Culture Documents
Localiation Config Guide Part2
Localiation Config Guide Part2
to upload and download data, process and reconcile invoice data that is to be reported to the GST Network
(GSTN) using a GST Suvidha Provider (GSP).
Any business system (SAP ERP and non-SAP ERP) can use DCS to send invoice details to the GSTN.
1 INTRODUCTION
This document is an installation and configuration guide for the components of the solution to be installed
and configured on the SAP Cloud Platform (Neo), hereafter referred to as SCP, and SAP Cloud Platform
Integration, hereafter referred to as SCPI.
This document can be used for both initial installation for a new customer, and for an upgrade to the latest
DCS version.
For an upgrade to latest version, please use all intermediate Release Tag of the Versions table below (e.g.
#DCS181) to get to the all the steps required for that release.
For upgrades, Section 2.3 and Section 2.4 would always be mandatory.
DCS versions follow the pattern for example, DCS 1.6.0 or DCS 1.7.1. The first two numbers for
example , represents a major feature whereas the third number 1 minor
release on top of 1.7.0.
DCS 1.5.1 Jan 2020 #DCS151 For Configuration XS Jobs, Please refer to document
XS_JOB_Configuration.pdf attached to Note
3
DCS Release Release Tag Comments
Version Date
2460667.
DCS 1.7.1 May 2020 #DCS171 For updating Configuration XS Jobs, Please refer to
document XS_JOB_Configuration.pdf attached to
Note 2460667.
DCS 1.8.1 June 2020 #DCS181 For updating Configuration XS Jobs, Please refer to
document XS_JOB_Configuration.pdf attached to
Note 2460667.
DCS 1.8.2* August 2020 #DCS182 *IMPORTANT NOTE: GSTN has introduced a new
version of APIs called v2.0.
DCS 1.9.0 Jan 2021 #DCS190 The below SAP Notes are mandatory for DCS 1.9.0
1.3 Support
If you face any issues while installing this solution, create an OSS incident under the XX-CSC-IN-ST
component.
2 INSTALLATION
4
2.1 Prerequisite Checks
Please logon to the SAP Cloud Platform (henceforth, SCP) Neo account cockpit using the URL and User Id
provided in the Welcome mail.
Welcome Mail sample:
Note: For initial setup of Subaccount please refer to Initial_Setup_Subaccount.pdf attached to Note 2460667