Professional Documents
Culture Documents
Komatsu Handbook Edition27
Komatsu Handbook Edition27
APPLICATION HANDBOOK
Edition 27
August 2006
CONTENTS
INDEX
Please note that the performance information included in this book is for
estimation purposes only. It is based on information that Komatsu Ltd. has
but actual figures will vary with the operating conditions, including
material characteristics, site conditions, operator efficiency, etc. Neither
Komatsu Ltd. nor its dealers will guarantee that the machines will perform
as estimated.
2006 Komatsu
All Rights Reserved
Printed in Japan
G-1
G-2
CONTENTS
INDEX
GENERAL INFORMATION BY INDEX TABLE
PREFACE
KOMATSU PRODUCT LINE
12 ENGINES 12 ENGINES
13 TIRES 13 TIRES
INDEX INDEX
G-3
Information Index Table GENERAL
G-4
Information Index Table GENERAL
G-5
Preface GENERAL
PREFACE
This handbook referes to machine specifications, productivity and owning & operation cost for construction
equipment sold by Komatsu. It serves as a guide for the following cases:
* Estimation of productivity for each machine
* Estimation of owning & operating costs for each machine
* Selection of machines for purchasing construction equipment
* Selection of machines for performing construction job
The performance of a machine is determined by its production and operating costs. Important machine
factors that influence production includes the horsepower, operating weight, capacity of work equipment,
traveling speed and types of mechanical, hydraulic and electrical systems. They are referred to in the related
section in the handbook. Some of the significant elements that comprise the operating cost factors are the
consumption of fuel and lubricants, the service life of tires and undercarriage and the repair cost of
components. These expenditures are discussed in the section entitled Owning & Operating Costs.
The data and tables in the handbook are based on Komatsu's bench and field tests, computer analysis and
many years of experience. We continuously conduct tests to improve the reliability of the data. However,
because of the complexity of factors influencing production costs and the deviations that may occur during
the preparation of data, Komatsu does not guarantee that the data is exact and that the performance shown
in the handbook is always obtainable with the given job conditions.
The basic performance data in the handbook are the values when machines are used at ideal efficiency. As
performance varies with operator's skill, ground and weather conditions, etc., in reality, the basic data needs
to be modified by using the various factors included in the handbook, resulting in different figures depending
on the selection of these factors. Owning and operating cost also varies depending upon the machine usage,
and the calculation result differs by what job condition and factors are applied for the calculation. Therefore, it
should be understood that the calculated figures do not always completely match the actual measured data.
Nevertheless, handbook users will be able to make proper approximate calculations based on the data given
in the handbook, their work experience and knowledge of local conditions.
This handbook is revised yearly. The data in the handbook is accurate at the time of printing; however,
Komatsu may make changes in the specifications and materials without notice. Changes are made because
of Komatsu's fundamental program of conducting continuous improvements on its products. Therefore, when
you need the most updated information or specifications, obtain the latest catalogs through your distributor.
This handbook contains machine models produced in the various areas in the world. Specifications may vary
depending upon production location; all models are not always available everywhere in the world.
The final objective for an owner of construction equipment is to perform the necessary construction job with
the best efficiency and safety. It is desirable for an owner to understand the job efficiency factors and the
machine use factors before utilizing this handbook.
They are as follows:
G-6
Preface GENERAL
G-7
Preface GENERAL
3) Prevention of fire
The owner and operator of a construction machine must follow the machine's maintenance guidelines
and manage the job so that danger of fire will be minimized. A fire breaks out mainly by leakage of fuel,
oil and grease; by electrical shorts caused from fatigue, loosening, or rubbing of electric parts and by
ignition from engine high temperature parts contacting combustibles, such as plants and papers.
• The owner of a machine needs to maintain a machine by daily checks so that the causes described
above do not exist.
• The operator must confirm by walk-around check before starting the machine that the above-
mentioned hazards do not exist. If any problems are found, the machine must not be started until the
problems are fixed.
• Equip a machine with a fire extinguisher in preparation for emergency.
G-8
The Komatsu GENERAL
Product Line
BULLDOZERS
Horsepower 29.5 to 858 kW (40 to 1150 HP)
SWAMP BULLDOZERS
Horsepower 29.5 to 168 kW (40 to 225 HP)
PIPELAYERS
Horsepower 168 to 259 kW (225 to 360 HP)
G-9
The Komatsu GENERAL
Product Line
PC450-7 (E0) PC400-7 (E0) PC380LC-7 PC350-7 (E0) PC340LC-7 (E0) PC300-7 (E0)
PC450LC-7 (E0) PC400LC-7 (E0) PC350LC-7 (E0) PC340NLC-7 (E0) PC300SE-7 (E0)
PC400SE-7 (E0) PC360-7 PC300LC-7 (E0)
PC300HD-7 (E0)
G-10
The Komatsu GENERAL
Product Line
WHEEL LOADERS
Bucket capacity 0.3 to 20 m3 (0.4 to 26.2 yd3)
(C) indicates custom series.
WA500-3 WA480-5 WA450-5 WA400-5 WA420-3 WA380-3 WA320-3 (C) WA250-5 WA250PT-5
WA500-6 WA480-6 WA470-5 WA430-5 WA380-5 WA320-5 WA270-5
WA470-3 WA380-6
WA470-6
WHEEL DOZERS
Flywheel horsepower 338 to 853 kW (454 to 853 HP)
TOWING TRACTORS
Operating weight 25,000 to 50,000 kg
(55,120 to 110,230 lb)
WT500E WT250E
BACKHOE LOADERS
Bucket capacity 0.7 to 1.03 m3 (0.92 to 1.35 yd3)
G-11
The Komatsu GENERAL
Product Line
CRAWLER CARRIERS
Hauling capacity 6 to 11 ton (6.6 to 12.1 US ton)
CD110R-2 CD60R-1
MOTOR GRADERS
Horsepower 93 to 209 kW (125 to 280 HP)
ROAD STABILIZERS
Horsepower 265 kW (355 HP)
CS360-2
CS360SD-2A
VIBRATORY ROLLERS
Operating weight 600 to 11,250 kg (1,320 to 24,800 lb)
G-12
The Komatsu GENERAL
Products Line
TELESCOPIC HANDLERS
Maximum Lifting height 9.0 m to 16.1 m (29’ 6" to 52’ 10")
HARVESTERS
Horsepower 140 to 207 kW (140 to 277 HP)
FORWARDERS
Max. permissible load 9 to 18 ton (9.9 to 19.8 U.S. ton)
EX 10
BR480RG-1
G-13
The Komatsu GENERAL
Products Line
PC78UUT-6 PC58UUT-3
ENGINES
Piston displacement 3.92 to 61.8 Itr (239 to 3771 cu in)
G-14
CONTENTS
INDEX
SECTION 1
CRAWLER-TYPE TRACTORS Sec 1A
BULLDOZERS Sec 1B
RIPPERS Sec 1C
TOWING WINCHES Sec 1D
PIPELAYERS Sec 1E
TRIMMING DOZERS Sec 1F
SECTION 1A
CRAWLER-TYPE
TRACTORS
CONTENTS
Features .................................................................... 1A-2
Specifications ........................................................... 1A-9
Specifications
(Low ground pressure Tractors) ........................ 1A-14
Drawbar pull vs. travel speed ............................... 1A-16
Ground pressure .................................................... 1A-19
Shoe application .................................................... 1A-21
Shoe selection ........................................................ 1A-22
Roller guard installation ........................................ 1A-24
Upper attachment ................................................... 1A-26
1A-1
Features CRAWLER-TYPE
TRACTORS
High productivity
The high-power engine, highly efficient power train,
large drawbar pull provided by the conventional
undercarriage, and the high performance work
equipment provide high productivity.
• Large capacity blade
Large capacity blade, powerful digging force,
large up-and-down movement of the blade, and
high strength provided by high tensile steel.
• Uniquely designed ripper FVBH0305
1A-2
Features CRAWLER-TYPE
TRACTORS
• Reduction of man-hours for turning over the NEW
CURRENT
bushings by employment of wedge ring. (Large
Class)
Track roller
• Strengthening of undercarriage by increase of
press fitting width of pin. (Small-middle Class) Track link
The most important matters for the undercarriage
of a bulldozer are holding of the oil filled in the
links and easiness of turning over the bushings. Roller guard
KOMATSU increased the rigidity and abrasion life
of the links and lowered the press fitting force of Wedge ring
Link pin
Bushing
WIDE
NARROW
PRESS FITTING WIDTH
Others
Use
Track 3 Others
Turning over
the bushings
New bushings Before turning over
er
ov
the bushings
g
Track 2 Track 2
in
rn
Tu
After turning over Used bushings With turning over Without turning over
the bushings the bushings the bushings
Final drive
FVDM0692
1A-3
Features CRAWLER-TYPE
TRACTORS
Easy operation / Operator comfort
• Operator-oriented arrangement of control levers,
pedals, instruments and operator seat.
• Walk-through operator compartment provides
easy boarding and exiting.
• Operator seat can be adjusted to provide the
most suitable operating posture.
• Steering clutches and brakes are interconnected
for easy operation.
• Low profile design assures excellent machine FLD00456
1A-4
Features CRAWLER-TYPE
TRACTORS
• Centralized oil pressure inspection ports D375A-5
Oil pressure check ports are centralized on the
left side of the chassis to make it easier to carry Single tilt
out inspection and maintenance. Dual tilt
E
L
DUA
Blade control joystick uses the PPC (Proportional
Pressure Control) valve and palm command
joystick the same as travel control joystick.
PITCH
PPC control uses the highly reliable Komatsu
hydraulic system enabling superb fine control. 3 4 FVDM0808A
(Dual tilt and pitch operation are enabled by
depressing switch with a thumb. This is available
when optional dual tilt dozer is installed.)
(D61, D65EX/PX, D85EX/PX, D155AX-6, D275,
D375A, D475A, D475A SD and D575A SD)
Easy maintenance
• Bolt-on type sprocket or segmented sprocket
teeth for easy in- field replacement. [Except D21]
FLD00421
Track
KomStat Hydrostatic Transmission Eng
Parking brake
• Automatic shift between 1st and 2nd FZDM0847
speeds
KomStat shifts automatically between 1st and 2nd
speed depending on load or ground conditions to
facilitate efficient operation.
• Intermediate speed selection
Enables the setting of intermediate speed in each
speed range as operator desires or optimum
travel speed to match job conditions.
This means, for example, intermediate speeds of
1st speed (4.3 km/h 2.7mph), such as 3.0 km/h
1.9 mph etc., are obtained by using the newly
developed PPC valve with friction disc clutch.
This contributes to increased job efficiency on fine
or rough grading operation with optimum travel
speed to match job conditions.
1A-5
Features CRAWLER-TYPE
TRACTORS
• HST dynamic brakes
Fulcrum of major bogie
KomStat uses HST dynamic brakes to ensure
safe operation.
Parking brake is wet, multiple-disc type with a
unique drag-prevention control to keep hydraulic
oil clean.
(D31, D37 and D39)
• K-Bogie undercarriage system
K-Bogie undercarriage system retains prior
advantages, with new additional features.
Features on K-Bogie Undercarriage System: Fulcrum of minor bogie
• K-bogies oscillate with two fulcrums, and track
roller vertical travel is greatly increased. Impact
loading on all undercarriage components has
been reduced and durability of components is
improved since track rollers are always in
contact with tack link.
• Undercarriage life is improved due to better
control of track chain alignment with track
rollers.
• Riding comfort is improved by reducing
vibration and shock when traveling over rough
terrain.
(D155AX-6, D275A, D275AX, D375A and
D475A)
• Auto-shift down function
Controller monitors engine speed, travel gear and
travel speed.
When load is applied and machine travel speed is
reduced, the controller automatically downshifts
to optimize gear speed to provide high fuel
efficiency. This function provides comfortable
operation and high productivity without manual
downshifting. (This function can be deactivated
with cancel switch).
(D275, D375A and D575A SD)
• Preset travel speed selection function
Preset travel speed selection function is standard
equipment, enabling the operator to select fore
and aft travel speed among three preset patterns,
F1-R2, F2-R2 and manual shift. When F1-R2 or
F2-R2 preset pattern is selected, and travel
control joystick moves from forward to reverse
direction, the machine travels forward/reverse
with F1/R2 or F2/R2 speed automatically. This
function reduces gear shifting time during
repeated round trip operations.
(D275, D375A and D575A SD)
1A-6
Features CRAWLER-TYPE
TRACTORS
• K-Bogie undercarriage system (8-roller,
oscillating idler)
New K-Bogie Undercarriage System combines
prior advantages with new additional features.
Current features: Fulcrum of major bogie
• K-Bogies that oscillate with two fulcrums
assure large amount of track roller vertical.
Impact load to undercarriage components is
minimized and durability of components is
improved since track rollers are always in
contact with track link.
• Track rollers follow track link movement to
extend the undercarriage life.
Fulcrum of minor bogie
• Excellent riding comfort is provided due to less
vibration and shock when traveling over rough
terrain.
Features on new K-Bogie undercarriage
system:
• New K-Bogies with front and rear single bogies
are utilized providing increased length of track
on ground to improve machine stability.
• The oscillating idler and increased sprocket
lead angle improve riding comfort when
traveling over rough terrain. (D375A-5E0,
D475A-5E0 and D475ASD-5E0)
• Automatic transmission with lockup
torque converter
A sharp reduction in fuel consumption and
greater power train efficiency is achieved by the
new automatic gearshift transmission and lock up
torque converter. The automatic gearshift
transmission selects the optimal gear range
depending on the working conditions and load
placed on the machine. The means the machine
is always operating at maximum efficiency.
(Manual gearshift mode is selectable with a
switch) (D155AX-6)
1A-7
Features CRAWLER-TYPE
TRACTORS
Ecology Features
• ecot 3 (EPA Tier 3, EU stage 3A certified
engine)
Komatsu develops and produces all major
components, such as engines, electronics and
hydraulic components in house.
With this “Komatsu Technology”, and adding
customer feedback, Komatsu is achieving great
advancements in technology.
To achieve high levels of productivity and ecology,
Komatsu developed the main components with
an advanced control system.
The result is a new generation of high
performance and environment friendly machines.
• Fuel efficient electronic controlled engine
The engine is EPA Tier 3 and EU stage 3A
emission regulation certified. The engine is
turbocharged and features Common Rail
Injection system (CRI) and air-to-air aftercooling
to maximize power, fuel efficiency and emission
compliance.
To minimize noise and vibration, the engine is
mounted to the main frame with rubber cushions.
• Hydraulic drive radiator cooling fan
The engine cooling fan rotation speed is
electronically controlled. The fan rotation speed
depends on engine coolant and hydraulic oil
temperatures, the higher the temperature the
higher the fan speed. This system increases fuel
efficiency, reduces the operating noise levels and
requires less horsepower than belt driven fan.
(D65-15E0, D85-15E0, D155AX-6, D275AX-5E0,
D375A-5E0)
1A-8
Specifications CRAWLER-TYPE
TRACTORS
Model
D21A-8 D31EX-21 D31EX-21*** D37EX-21
Item
OPERATING WEIGHT* kg (lb) 3710 (8,180) 7130 (15,720) 7130 (15,720) 7410 (16,340)
TRACTOR WEIGHT kg (lb) 3160 (6,970) 5775 (12,730) 5775 (12,730) 6010 (13,250)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 29.5 (40)/2450 56 (75)/2000 56 (75)/2000 63 (85)/2000
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 2.6 (1.6) 3.4 (2.1) 0.8 (0.5) to 3.4 (2.1)
2nd 4.4 (2.7) 5.6 (3.5) 8.5 (5.3) 5.6 (3.5)
3rd — 8.5 (5.3) — 8.5 (5.3)
Reverse 1st 3.3 (2.1) 4.1 (2.5) 0.8 (0.5) to 4.1 (2.5)
2nd 5.6 (3.5) 6.5 (4.0) 8.5 (5.3) 6.5 (4.0)
3rd — 8.5 (5.3) — 8.5 (5.3)
Max. drawbar pull kg (lb/kN) 4520 12500 12500 12500
(9,970/44.3) (27,560/123) (27,560/123) (27,560/123)
DIMENSIONS:
Overall length (tractor) mm (ft.in) 2405 (7'11") 3055 (10'0") 3055 (10'0") 3055 (10'0")
Overall length* mm (ft.in) 3250 (10'8") 4015 (13'2") 4015 (13'2") 4015 (13'2")
Overall width (w/o trunnion) mm (ft.in) 1610 (5'3") 1850 (6'1") 1850 (6'1") 1850 (6'1")
Overall width (with blade)* mm (ft.in) 2170 (7'1") 2435 (8'0") 2435 (8'0") 2720 (8'11")
Overall height (tractor)** mm (ft.in) 1785 (5'10") 1890 (6'2") 1890 (6'2") 1890 (6'2")
Overall height* mm (ft.in) 2450 (8') 2700 (8'10") 2700 (8'10") 2700 (8'10")
Track gauge mm (ft.in) 1310 (4'4") 1450 (4'9") 1450 (4'9") 1450 (4'9")
Length of track on ground mm (ft.in) 1685 (5'6") 2010 (6'7") 2010 (6'7") 2240 (7'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D94LE SAA4D102E SAA4D102E SAA4D102E
No.of cylinders- mm (in) 4-94 × 110 4-102 × 120 4-102 × 120 4-102 × 120
bore × stroke (3.70 × 4.33) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 3.053 (186) 3.92 (239) 3.92 (239) 3.92 (239)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5 1/5 1/5 1/6
Width of standard shoe mm (in) 300 (11.8) 400 (15.7) 400 (15.7) 400 (15.7)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 60 (15.9) 165 (43.6) 165 (43.6) 165 (43.6)
*) Spec conditions:
Bulldozer PAT PAT PAT PAT
Rear attachment — — — —
Upper attachment — ROPS canopy ROPS canopy ROPS canopy
Model
D37EX-21*** D39EX-21 D39EX-21*** D41E-6
Item
OPERATING WEIGHT* kg (lb) 7410 (16,340) 8520 (18,780) 8520 (18,780) 10950 (24,140)
TRACTOR WEIGHT kg (lb) 6010 (13,250) 6950 (15,320) 6950 (15,320) 8790 (19,380)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 63 (85)/2000 71 (95)/2200 71 (95)/2200 82 (110)/2300
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 0.8 (0.5) to 3.4 (2.1) 0.8 (0.5) to 2.4 (1.5)
2nd 8.5 (5.3) 5.6 (3.5) 8.5 (5.3) 4.4 (2.7)
3rd — 8.5 (5.3) — 7.6 (4.7)
Reverse 1st 0.8 (0.5) to 4.1 (2.5) 0.8 (0.5) to 3.0 (1.9)
2nd 8.5 (5.3) 6.5 (4.1) 8.5 (5.3) 5.5 (3.4)
3rd — 8.5 (5.3) — 9.4 (5.8)
Max. drawbar pull kg (lb/kN) 12500 13800 13800 14740
(27,560/123) (30,420/135) (30,420/135) (32,500/144.6)
DIMENSIONS:
Overall length (tractor) mm (ft.in) 3055 (10'0") 3195(10'6") 3195(10'6") 3610 (11'11")
Overall length* mm (ft.in) 4015 (13'2") 4200 (13'9") 4200 (13'9") 4880 (16'0")
Overall width (w/o trunnion) mm (ft.in) 1850 (6'1") 2110 (6'11") 2110 (6'11") 2300 (7'7")
Overall width (with blade)* mm (ft.in) 2720 (8'11") 2740 (9'0") 2740 (9'0") 3045 (10'0")
Overall height (tractor)** mm (ft.in) 1890 (6'2") 1965 (6'5") 1965 (6'5") 2020 (6'8")
Overall height* mm (ft.in) 2700 (8'10") 2770 (9'1") 2770 (9'1") 2900 (9'6")
Track gauge mm (ft.in) 1450 (4'9") 1650 (5'5") 1650 (5'5") 1790 (5'10")
Length of track on ground mm (ft.in) 2240 (7'4") 2360 (7'9") 2360 (7'9") 2485 (8'2")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA4D102E SAA4D102E SAA4D102E SA6D102E
No.of cylinders- mm (in) 4-102 × 120 4-102 × 120 4-102 × 120 6-102 × 120
bore × stroke (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 3.92 (239) 5.88 (359)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/6 1/6 1/6 1/6
Width of standard shoe mm (in) 400 (15.7) 460 (18.1) 460 (18.1) 510 (20.1)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 165 (43.6) 165 (43.6) 165 (43.6) 250 (66.0)
*) Spec conditions:
Bulldozer PAT PAT PAT PAT PAT
Rear attachment — — — — —
Upper attachment ROPS canopy ROPS canopy ROPS canopy ROPS canopy ROPS canopy
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
*** : With variable travel speed mode
*4 : Long track spec.
1A-9
Specifications CRAWLER-TYPE
TRACTORS
Model
D61EX-15 D61EX-15*4 D65E-12 D65EX-15
Item
OPERATING WEIGHT* kg (lb) 16520 (36,420) 17230 (37,990) 19125 (42,160) 20080 (44,270)
TRACTOR WEIGHT kg (lb) 13730 (30,270) 14300 (31,530) 15620 (34,440) 16350 (36,050)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 116 (155)/1800 116 155()/1800 135 (180)/1950 142 (190)/1950
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.3 (2.1) 3.3 (2.1) 3.9 (2.4) 3.9 (2.4)
2nd 5.8 (3.6) 5.8 (3.6) 6.8 (4.2) 6.8 (4.2)
3rd 9.4 (5.8) 9.4 (5.8) 10.6 (6.6) 10.6 (6.6)
Reverse 1st 4.3 (2.7) 4.3 (2.7) 5.0 (3.1) 5.0 (3.1)
2nd 7.3 (4.5) 7.3 (4.5) 8.6 (5.3) 8.6 (5.3)
3rd 11.2 (7.0) 11.2 (7.0) 13.4 (8.3) 13.4 (8.3)
Max. drawbar pull kg (lb/kN) — — — —
— —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 3920 (12'10") 4160 (13'8") 4365 (14'4") 4365 (14'4")
Overall length* mm (ft.in) 5030 (16'6") 5450 (17'11") 5440 (17'10") 5440 (17'10")
Overall width (w/o trunnion) mm (ft.in) 2500 (8'2") 2500 (8'2") 2390 (7'10") 2390 (7'10")
Overall width (with blade)* mm (ft.in) 3275 (10'9") 3275 (10'9") 3460 (11'4") 3460 (11'4")
Overall height (tractor)** mm (ft.in) 2270 (7'5") 2270 (7'5") 2330 (7'8") 2330 (7'8")
Overall height* mm (ft.in) 3150 (10'4") 3150 (10'4") 3165 (10'5") 3220 (10'7")
Track gauge mm (ft.in) 1900 (6'3") 1900 (6'3") 1880 (6'2") 1880 (6'2")
Length of track on ground mm (ft.in) 2600 (8'6") 3170 (10'5") 2675 (8'9") 2675 (8'9")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D114E SA6D114E 6D125E SA6D125E
No.of cylinders- mm (in) 6-114 × 135 6-114 × 135 6 -125 × 150 6 -125 × 150
bore × stroke (4.49 × 5.31) (4.49 × 5.31) (4.92 × 5.91) (4.92 × 5.91)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/8 2/7 2/7
Width of standard shoe mm (in) 600 (23.6) 600 (23.6) 510 (20.1) 510 (20.1)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 390 (103) 390 (103) 406 (107) 415 (109.6)
*) Spec conditions:
Bulldozer PAT PAT Semi-U tilt Semi-U tilt
Rear attachment — — — —
Upper attachment ROPS canopy ROPS canopy ROPS canopy Steel cab, ROPS
DIMENSIONS:
Overall length (tractor) mm (ft.in) 4305 (14'2") 4365 (14'4") 4360 (14'4") 4305 (14'2")
Overall length* mm (ft.in) 5440 (17'10") 5845 (19'2") 5750 (18'10") 5440 (17'10")
Overall width (w/o trunnion) mm (ft.in) 2390 (7'10") 2390 (7'10") 2390 (7'10") 2890 (9'6")
Overall width (with blade)* mm (ft.in) 3460 (11'4") 3460 (11'6") 3460 (11'4") 3640 (11'11")
Overall height (tractor)** mm (ft.in) 2300 (7'7") 2330 (7'8") 2300 (7'7") 2300 (7'7")
Overall height* mm (ft.in) 3220 (10'7") 3220 (10'9") 3220 (10'7") 3220 (10'9")
Track gauge mm (ft.in) 1880 (6'2") 1880 (6'2") 1880 (6'2") 2050 (6'9")
Length of track on ground mm (ft.in) 2675 (8'9") 3285 (10'9") 3285 (10'9") 2675 (8'9")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E-3 SA6D125E SAA6D114E-3 SA6D125E
No.of cylinders- mm (in) 6 - 114 × 135 6 -125 × 150 6 -114 × 135 6 -125 x 150
bore × stroke (4.49 × 5.31) (4.92 × 5.91) (4.49 × 5.31) (4.92 x 5.91)
Piston displacement ltr. (cu.in) 8.27 (505) 11.04 (674) 8.27 (505) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/8 2/8 2/7
Width of standard shoe mm (in) 510 (20.0) 510 (20.1) 510 (20.0) 810 (31.9)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 415 (109.6) 415 (109.6) 415 (109.6) 415 (109.6)
*) Spec conditions:
Bulldozer Semi-U tilt Semi-U tilt Semi-U tilt Semi-U tilt
Rear attachment — — — —
Upper attachment Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
*** : Travel speed km/h (ft.in) of D70LE-8: Forward 4th: 7.0 (4.3), 5th: 10.3 (6.4), Reverse 4th: 9.1 (5.7)
*4 : Long track spec.
q
: Tier 3 and stage 3A model
1A-10
Specifications CRAWLER-TYPE
TRACTORS
Model q
D65WX-15E0 D68ESS-12 D85ESS-2 D85ESS-2A
Item
OPERATING WEIGHT* kg (lb) 21140 (46,610) 18800 (41,500) 21490 (47,380) 20670 (45,580)
TRACTOR WEIGHT kg (lb) 18050 (39,790) 14280 (31,490) 15740 (34,700) 15420 (34,000)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 155 (207)/1950
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 153 (205)/1950
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 142 (190)/1950 116 (155)/1850 161 (215)/1950 149 (200)/1950
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.3 (2.1) 3.4 (2.1) 3.9 (2.4) 3.9 (2.4)
2nd 6.3 (3.9) 5.8 (3.6) 6.8 (4.2) 6.8 (4.2)
3rd 10.1 (6.3) 9.0 (6.0) 10.6 (6.6) 10.6 (6.6)
Reverse 1st 4.4 (2.7) 5.0 (3.1) 5.0 (3.1)
2nd 7.6 (4.7) 8.6 (5.3) 8.6 (5.3)
3rd 12.9 (8.1) 11.3 (7.0) 13.4 (8.3) 13.4 (8.3)
Max. drawbar pull kg (lb/kN) — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 4305 (14'2") 4100 (13'5") 4135 (13'7'') 4150 (13'7")
Overall length* mm (ft.in) 5440 (17' 10") 6120 (20'1") 5930 (19'5") 7150 (23'6")
Overall width (w/o trunnion) mm (ft.in) 2860 (9'4") 2535 (8'4") 2660 (8'9'') 2560 (8'5")
Overall width (with blade)* mm (ft.in) 3640 (11'11") 3275 (10'9") 4370 (14'4") 4370 (14'4")
Overall height (tractor)** mm (ft.in) 2300 (7'7") 2305 (7'7") 2375 (7'10'') 2375 (7'10")
Overall height* mm (ft.in) 3220 (10'7") 3135 (10'3") 2560 (8'5") 2995 (9'10")
Track gauge mm (ft.in) 2050 (6'9") 1925 (6'4") 2050 (6'9'') 2050 (6'9")
Length of track on ground mm (ft.in) 2675 (8'9") 2930 (9'7") 2980 (9'9'') 2980 (9'9")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E-3 S6D114E S6D125 S6D125
No.of cylinders- mm (in) 6-114 × 135 4-114 × 135 6-125 × 150 6-125 × 150
bore × stroke (4.49 × 5.31) (4.49 × 5.31) (4.92 × 5.91) (4.92 × 5.91)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/6 2/8 2/8
Width of standard shoe mm (in) 810 (32) 610 (24) 610 (24.0) 510 (20.1)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 415 (109.6) 315 (93.3) 407 (107.5) 406 (107)
*) Spec conditions:
Bulldozer Semi-U tilt PAT Angledozer Angledozer
Rear attachment — Winch Winch Multi-shank ripper
Upper attachment Steel cab, ROPS Sweep canopy Sweep canopy Canopy
Model qD85EX-15E0
D85EX-15 D155A-5 D155AX-5
Item
OPERATING WEIGHT* kg (lb) 28000 (61,735) 28100 (61,950) 38700 (85,320) 38800 (85,540)
TRACTOR WEIGHT kg (lb) 21040 (46,380) 21220 (46,780) 27900 (61,510) 29400 (64,820)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 199 (266)/1900
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 197 (264)/1900
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 179 (240)/1900 179 (240)/1900 225 (302)/1900 231 (310)/1900
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.6 (2.2) 3.3 (2.1) 3.7 (2.3) 3.5 (2.2)
2nd 6.1 (3.8) 6.1 (3.8) 6.7 (4.2) 6.2 (3.9)
3rd 10.1 (6.3) 10.1 (6.3) 11.0 (6.8) 10.8 (6.7)
Reverse 1st 4.7 (2.9) 5.0 (3.1) 4.8 (3.0)
2nd 8.0 (5.0) 8.2 (5.1) 8.4 (5.2)
3rd 13.0 (8.1) 13.0 (8.1) 13.9 (8.6) 13.9 (8.6)
Max. drawbar pull kg (lb/kN) — — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 5035 (16'6") 4590 (15'1") 4975 (16'4") 4865 (16'0")
Overall length* mm (ft.in) 7255 (23'10") 5795 (19') 8155 (26'9") 8155 (26'9")
Overall width (w/o trunnion) mm (ft.in) 2560 (8'5") 2560 (8'5") 2695 (8'10") 2695 (8'10")
Overall width (with blade)* mm (ft.in) 3635 (11'11") 3635 (11'11") 3955 (13'0") 3955 (13'0")
Overall height (tractor)** mm (ft.in) 2590 (8'6") 2555 (8'5")
Overall height* mm (ft.in) 3330 (10'11") 3330 (10'11") 3500 (11'6") 3500 (11'6")
Track gauge mm (ft.in) 2000 (6'7") 2000 (6'7") 2100 (6'11") 2100 (6'11")
Length of track on ground mm (ft.in) 3050 (10') 3050 (10') 3210 (10'6") 3210 (10'6")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D125E SAA6D125E-5 SA6D140E SA6D140E
No.of cylinders- mm (in) 6-125 × 150 6-125 × 150 6-140 × 165 6-140 × 165
bore × stroke (4.9 × 5.9) (4.92 × 5.91) (5.51 × 6.50) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674) 15.24 (930) 15.24 (930)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/7 2/6 2/6
Width of standard shoe mm (in) 560 (22) 560 (22) 560 (22.0) 560 (22.0)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 490 (129) 490 (129) 500 (132) 625 (165)
*) Spec conditions:
Bulldozer Semi-U tilt Semi-U tilt Semi-U tilt Semi-U tilt
Rear attachment Multi-shank ripper Multi-shank ripper Multi-shank ripper Giant ripper
Upper attachment Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
q : Tier 3 and stage 3A model
1A-11
Specifications CRAWLER-TYPE
TRACTORS
Model q
D155AX-6 D155A-2A D275A-5 D275AX-5
Item
OPERATING WEIGHT* kg (lb) 39500 (87,100) 34560 (76,190) 49850 (109,900) 49850 (109,900)
TRACTOR WEIGHT kg (lb) 31000 (68,350) 27870 (61,440) 37680 (83,070) 37680 (83,070)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 268 (360)/1900
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 264 (354)/1900
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 239 (320)/1900 239 (320)/2000 306 (410)/2000 306 (410)/2000
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.8 (2.4) 3.7 (2.3) 3.8 (2.4) 3.8 (2.4)
2nd 5.6 (3.5) 6.8 (4.2) 6.7 (4.2) 6.7 (4.2)
3rd 11.6 (7.2) 11.8 (7.3) 11.2 (7.0) 11.2 (7.0)
Reverse 1st 4.5 (2.8) 4.9 (3.0) 4.9 (3.0)
2nd 8.2 (5.1) 8.7 (5.4) 8.7 (5.4)
3rd 14.0 (8.7) 13.7 (8.5) 14.9 (9.3) 14.9 (9.3)
Max. drawbar pull kg (lb/kN) — — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 4875 (16'0") 5080 (16'8") 5255 (17'3") 5255 (17'3")
Overall length* mm (ft.in) 8225 (27') 6560 (21'6") 9290 (30'6") 9260 (30'5")
Overall width (w/o trunnion) mm (ft.in) 2765 (9'1") 2810 (9'3") 2925 (9'7") 2925 (9'7")
Overall width (with blade)* mm (ft.in) 4060 (13'4") 4130 (13'7") 4300 (14'1") 4300 (14'1")
Overall height (tractor)** mm (ft.in) 2680 (8'10") 2755 (9') 3160 (10'4") 3160 (10'4")
Overall height* mm (ft.in) 3395 (11'2") 3690 (12'1") 3985 (13'1") 3985 (13'1")
Track gauge mm (ft.in) 2140 (7') 2140 (7') 2260 (7'5") 2260 (7'5")
Length of track on ground mm (ft.in) 3275 (10'9") 3150 (10'4") 3480 (11'5") 3480 (11'5")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D140E-5 SA6D140E SDA6D140E SDA6D140E
No.of cylinders- mm (in) 6-140 × 165 6-140 × 165 6-140 × 165 6-140 × 165
bore × stroke (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 15.24 (930) 15.24 (930) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/7 2/7 2/7
Width of standard shoe mm (in) 560 (22) 560 (22.0) 610 (24.0) 610 (24.0)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 625 (165) 600 (159) 840 (222) 840 (222)
*) Spec conditions:
Strengthened Semi-U tilt Semi-U tilt Semi-U tilt
Bulldozer
SIGMADOZER
Rear attachment
Giant ripper — Giant ripper Giant ripper
Upper attachment
ROPS cab — Steel cab, ROPS Steel cab, ROPS
Model q q
D275AX-5E0 D375A-5 D375A-5E0 D475A-5
Item
OPERATING WEIGHT* kg (lb) 49850 (109,900) 66990 (147,690) 69560 (153,350) 102500 (226,010)
TRACTOR WEIGHT kg (lb) 37680 (83,070) 49800 (109,790) 51790 (114,180) 77390 (170,610)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 451 (605)/1800
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 391 (525)/1800
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 306 (410)/2000 391 (525)/1800 391 (525)/1800 641 (860)/2000
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.6 (2.2) 3.8 (2.4) 3.5 (2.2) 3.5 (2.2)
2nd 6.7 (4.2) 6.8 (4.2) 6.8 (4.2) 6.3 (3.9)
3rd 11.2 (7.0) 11.8 (7.3) 11.8 (7.3) 10.9 (6.8)
Reverse 1st 4.7 (2.9) 5.1 (3.2) 4.7 (2.9)
2nd 8.7 (5.4) 9.2 (5.7) 8.4 (5.2)
3rd 14.9 (9.3) 15.8 (9.8) 15.8 (9.8) 14.3 (8.9)
Max. drawbar pull kg (lb/kN) — — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 5255 (17'3") 5770 (18'11") 5770 (18'11") 6680 (21'11")
Overall length* mm (ft.in) 9260 (30'5") 10330 (33'11") 10410 (34'2") 11565 (37'11")
Overall width (w/o trunnion) mm (ft.in) 2925 (9'7") 3220 (10'7") 3110 (10'2") 3610 (11'10")
Overall width (with blade)* mm (ft.in) 4300 (14'1") 4695 (15'5") 4695 (15'5") 5265 (17'3")
Overall height (tractor)** mm (ft.in) 3160 (10'4") 3280 (10'9") 3280 (10'9") 3660 (12')
Overall height* mm (ft.in) 3990 (13'1") 4230 (13'11") 4285 (14'1") 4590 (15'1")
Track gauge mm (ft.in) 2260 (7'5") 2500 (8'2") 2500 (8'2") 2770 (9'1")
Length of track on ground mm (ft.in) 3480 (11'5") 3840 (12'7") 3980 (13'1") 4365 (14'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D140E-5 SA6D170E SAA6D170E-5 SDA12V140
No.of cylinders- mm (in) 6-140 × 165 6-170 × 170 6-170 × 170 12-140 × 140
bore × stroke (5.51 × 6.50) (6.69 × 6.69) (6.69 × 6.69) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 11.04 (674) 23.15 (1413) 23.15 (1413) 30.48 (1860)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/7 2/7 2/8 2/7
Width of standard shoe mm (in) 610 (24.0) 610 (24.0) 610 (24.0) 710 (28.0)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 840 (222) 1050 (277) 1050 (277) 1670 (441)
*) Spec conditions:
Semi-U tilt
Bulldozer Semi-U tilt Semi-U tilt Semi-U tilt
Giant ripper
Rear attachment Giant ripper Giant ripper Giant ripper
Steel cab, ROPS
Upper attachment Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
q : Tier 3 and stage 3A model
1A-12
Specifications CRAWLER-TYPE
TRACTORS
Model
D475A-5E0 D475A-5 SD D475A-5E0 SD D575A-3
Item
OPERATING WEIGHT* kg (lb) 108390 (238,960) 108080 (238,270) 113200 (249,560) 131350 (289,570)
TRACTOR WEIGHT kg (lb) 83590 (184,290) 79980 (176,320) 84510 (186,310) 98450 (217,040)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 671 (899)/2000 671 (899)/2000
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 644 (890)/2000 664 (890)/2000
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 641 (860)/2000 641 (860)/2000 641 (860)/2000 783 (1050)/1800
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.3 (2.1) 3.5 (2.2) 3.3 (2.1) 3.7 (2.3)
2nd 6.2 (3.9) 6.3 (3.9) 6.2 (3.9) 6.6 (4.1)
3rd 11.2 (7.0) 10.9 (6.8) 11.2 (7.0) 11.6 (7.2)
Reverse 1st 4.7 (2.9) 4.3 (2.7)
2nd 8.4 (5.2) 7.7 (4.8)
3rd 14.0 (8.7) 14.3 (8.9) 14.0 (8.7) 13.3 (8.3)
Max. drawbar pull kg (lb/kN) — — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 6680 (21'11") 6680 (21'11") 6680 (21'11") 7270 (23'10")
Overall length* mm (ft.in) 11565 (37'11") 10525 (34'6") 10525 (34'6") 12095 (39'8")
Overall width (w/o trunnion) mm (ft.in) 3660 (12') 3610 (11'10") 3610 (11'10") 4180 (13'9")
Overall width (with blade)* mm (ft.in) 5265 (17'3") 6465 (21'3") 6465 (21'3") 5880 (19'3")
Overall height (tractor)** mm (ft.in) 3660 (12') 3660 (12') 3660 (12') 3780 (12'5")
Overall height* mm (ft.in) 4646 (15'3") 4590 (15'1") 4646 (15'3") 4880 (16'0")
Track gauge mm (ft.in) 2770 (9'1") 2770 (9'1") 2770 (9'1") 3220 (10'7")
Length of track on ground mm (ft.in) 4524 (14'10") 4365 (14'4") 4524 (14'10") 4530 (14'10")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA12V140E-3 SDA12V140 SAA12V140E-5 SA12V170
No.of cylinders- mm (in) 12-140 × 165 12-140 × 165 12-140 × 165 12-170 × 170
bore × stroke (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50) (6.69 × 6.69)
Piston displacement ltr. (cu.in) 30.48 (1860) 30.48 (1860) 46.3 (2825)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/8 2/7 2/8 2/6
Width of standard shoe mm (in) 710 (28.0) 810 (32.0) 810 (32.0) 860 (34.0)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 1670 (441) 1670 (441) 1670 (441) 2100 (555)
*) Spec conditions:
Bulldozer Semi-U tilt Super dozer Super dozer Semi-U dozer
Rear attachment Giant ripper Counterweight Counterweight Giant ripper
Upper attachment Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS
Other Air conditioner
Model
D575A-3 SD
Item
OPERATING WEIGHT* kg (lb) 152600 (336,420)
TRACTOR WEIGHT kg (lb) 114580 (252,600)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 858 (1150)/1800
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.7 (2.3)
2nd 6.6 (4.1)
3rd 11.6 (7.2)
Reverse 1st 4.3 (2.7)
2nd 7.7 (4.8)
3rd 13.3 (8.3)
Max. drawbar pull kg (lb/kN) —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 7695 (25'3")
Overall length* mm (ft.in) 11720 (38'5")
Overall width (w/o trunnion) mm (ft.in) 4180 (13'9")
Overall width (with blade)* mm (ft.in) 7400 (24'3")
Overall height (tractor)** mm (ft.in) 3780 (12'5")
Overall height* mm (ft.in) 4880 (16'0")
Track gauge mm (ft.in) 3220 (10'7")
Length of track on ground mm (ft.in) 5485 (18')
ENGINE: KOMATSU
Model SA12V170
No.of cylinders- mm (in) 12-170 × 170
bore × stroke (6.69 × 6.69)
Piston displacement ltr. (cu.in) 46.3 (2825)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/8
Width of standard shoe mm (in) 860 (33.9)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 2100 (555)
*) Spec conditions:
Super dozer
Bulldozer
Counterweight
Rear attachment
Steel cab, ROPS
Upper attachment
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
1A-13
Specifications CRAWLER-TYPE
(Low Ground Pressure Tractors) TRACTORS
Model
D21P-7 D31PX-21 D31PX-7*** D37PX-21
Item
OPERATING WEIGHT* kg (lb) 4100 (9,040) 7650 (16,870) 7650 (16,870) 7770 (17,130)
TRACTOR WEIGHT kg (lb) 3520 (7,760) 6220 (13,710) 6220 (13,710) 6310 (13,910)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 29.5 (40)/2450 56 (75)/2000 56 (75)/2000 63 (85)/2000
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 2.6 (1.6) 3.4 (2.1) 0.8 (0.5) to 3.4 (2.1)
2nd 4.4 (2.7) 5.6 (3.5) 8.5 (5.3) 5.6 (3.5)
3rd — 8.5 (5.3) — 8.5 (5.3)
Reverse 1st 3.3 (2.1) 4.1 (2.5) 0.8 (0.5) to 4.1 (2.5)
2nd 5.6 (3.5) 6.5 (4.0) 8.5 (5.3) 6.5 (4.0)
3rd — 8.5 (5.3) — 8.5 (5.3)
Max. drawbar pull kg (lb/kN) 4480 12500 4480 12500
(9,880/43.9) (27,560/123) (9,880/43.9) (27,560/123)
DIMENSIONS:
Overall length (tractor) mm (ft.in) 2430 (8'0") 3090 (10'2") 3090 (10'2") 3055 (10'0")
Overall length* mm (ft.in) 3260 (10'8") 3995 (13'1") 3995 (13'1") 3995 (13'1")
Overall width (w/o trunnion) mm (ft.in) 2000 (6'7") 2250 (7'5") 2250 (7'5") 2250 (7'5")
Overall width (with blade)* mm (ft.in) 2560 (8'5") 3200 (10'6") 3200 (10'6") 3250 (10'8")
Overall height (tractor)** mm (ft.in) 1810 (5'11") 1890 (6'2") 1890 (6'2") 1890 (6'2")
Overall height* mm (ft.in) 2335 (7'8") 2700 (8'10") 2700 (8'10") 2700 (8'10")
Track gauge mm (ft.in) 1490 (4'11") 1650 (5'5") 1650 (5'5") 1650 (5'5")
Length of track on ground mm (ft.in) 1685 (5'6") 2185 (7'2") 2185 (7'2") 2240 (7'4")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D94LE SAA4D102E SAA4D102E SAA4D102E
No.of cylinders- mm (in) 4-94 × 110 4-102 × 120 4-102 × 120 4-102 × 120
bore × stroke (3.70 × 4.33) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 3.053 (186) 3.92 (239) 3.92 (239) 3.92 (239)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/5 1/6 1/6 1/6
Width of standard shoe mm (in) 510 (20.1) 600 (23.6) 600 (23.6) 600 (23.6)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 60 (15.9) 165 (43.6) 165 (43.6) 165 (43.6)
*) Spec conditions:
Bulldozer PAT PAT PAT PAT
Rear attachment — — — —
Upper attachment — ROPS canopy ROPS canopy ROPS canopy
Model
D37PX-21*** D39PX-21 D39PX-21*** D41P-6
Item
OPERATING WEIGHT* kg (lb) 7770 (17,130) 8900 (19,620) 8900 (19,620) 11340 (25,000)
TRACTOR WEIGHT kg (lb) 6310 (13,910) 7230 (15,940) 7230 (15,940) 9370 (20,660)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 63 (85)/2000 71 (95)/2200 71 (95)/2200 82 (110)/2300
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 0.8 (0.5) to 3.4 (2.1) 0.8 (0.5) to 2.4 (1.5)
2nd 8.5 (5.3) 5.6 (3.5) 8.5 (5.3) 4.4 (2.7)
3rd — 8.5 (5.3) — 7.6 (4.7)
Reverse 1st 0.8 (0.5) to 4.1 (2.5) 0.8 (0.5) to 3.0 (1.9)
2nd 8.5 (5.3) 6.5 (4.1) 8.5 (5.3) 5.5 (3.4)
3rd — 8.5 (5.3) — 9.4 (5.8)
Max. drawbar pull kg (lb/kN) 12500 13800 13800 14700
(27,560/123) (30,420/135) (30,420/135) (32,410/144.2)
DIMENSIONS:
Overall length (tractor) mm (ft.in) 3055 (10'0") 3195(10'6") 3195(10'6") 3610 (11'10")
Overall length* mm (ft.in) 3995 (13'1") 3995 (13'1") 3995 (13'1") 4880 (16'0")
Overall width (w/o trunnion) mm (ft.in) 2250 (7'5") 2425 (7'11") 2425 (7'11") 2490 (8'2")
Overall width (with blade)* mm (ft.in) 3250 (10'8") 3330 (10'11") 3330 (10'11") 3045 (11'0")
Overall height (tractor)** mm (ft.in) 1890 (6'2") 1965 (6'5") 1965 (6'5") 2020 (6'8")
Overall height* mm (ft.in) 2700 (8'10") 2770 (9'1") 2770 (9'1") 2885 (9'6")
Track gauge mm (ft.in) 1650 (5'5") 1790 (5'10") 1790 (5'10") 1790 (5'10")
Length of track on ground mm (ft.in) 2240 (7'4") 2360 (7'9") 2360 (7'9") 2745 (9')
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA4D102E SAA4D102E SAA4D102E SA6D102E
No.of cylinders- mm (in) 4-102 × 120 4-102 × 120 4-102 × 120 6-102 × 120
bore × stroke (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 3.92 (239) 5.88 (359)
UNDERCARRIAGE:
No.of rollers (carrier/track) 1/6 1/6 1/6 1/7
Width of standard shoe mm (in) 600 (23.6) 635 (25.0) 635 (25.0) 700 (27.6)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 165 (43.6) 165 (43.6) 165 (43.6) 250 (66.0)
*) Spec conditions:
Bulldozer PAT PAT PAT PAT
Rear attachment — — — —
Upper attachment ROPS canopy ROPS canopy ROPS canopy ROPS canopy
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
*** : Variable travel speed mode
1A-14
Specifications CRAWLER-TYPE
(Low Ground Pressure Tractors) TRACTORS
Model qD65PX-15E0
D61PX-15 D65P-12 D65PX-15
Item
OPERATING WEIGHT* kg (lb) 18140 (39,990) 20185 (44,500) 20800 (45,860) 21000 (46,300)
TRACTOR WEIGHT kg (lb) 15050 (33,180) 16940 (37,350) 17330 (38,210) 18240 (40,210)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 155 (207)/1950
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 153 (205)/1950
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 116 (155)/1800 142 (190)/1950 142 (190)/1950 142 (190)/1950
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.3 (2.1) 3.9 (2.4) 3.9 (2.4) 3.3 (2.1)
2nd 5.8 (3.6) 6.8 (4.2) 6.8 (4.2) 6.3 (3.9)
3rd 9.4 (5.8) 10.6 (6.6) 10.6 (6.6) 10.1 (6.3)
Reverse 1st 4.3 (2.7) 5.0 (3.1) 5.0 (3.1)
2nd 7.3 (4.5) 8.6 (5.3) 8.6 (5.3)
3rd 11.2 (7.0) 13.4 (8.3) 13.4 (8.3) 12.9 (8.1)
Max. drawbar pull kg (lb/kN) — — — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 4160 (13'8") 4425 (14'6") 4425 (14'6") 4360 (14'4")
Overall length* mm (ft.in) 5440 (17'10") 5520 (18'1") 5520 (18'1") 5520 (18'1")
Overall width (w/o trunnion) mm (ft.in) 3000 (9'10") 2965 (9'9") 2965 (9'9") 2965 (9'8")
Overall width (with blade)* mm (ft.in) 3860 (12'8") 3970 (13'0") 3970 (13'0") 3970 (13' 0")
Overall height (tractor)** mm (ft.in) 2270 (7'5") 2300 (7'7") 2300 (7'7") 2300 (7'7")
Overall height* mm (ft.in) 3150 (10'4") 3165 (10'5") 3220 (10'7") 3220 (10'7")
Track gauge mm (ft.in) 2140 (7') 2050 (6'9") 2050 (6'9") 2050 (6' 9")
Length of track on ground mm (ft.in) 3170 (10'5") 3285 (10'9") 3285 (10'9") 3285 (10'9")
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SA6D114E S6D125E SA6D125E SAA6D114E-3
No.of cylinders- mm (in) 6-114 × 135 6-125 × 150 6-125 × 150 6-114 × 135
bore × stroke (4.49 × 5.31) (4.92 × 5.91) (4.92 × 5.91) (4.49 × 5.31)
Piston displacement ltr. (cu.in) 8.27 (505) 11.04 (674) 11.04 (674) 8.27 (505)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/8 2/8 2/8 2/8
Width of standard shoe mm (in) 860 (33.9) 915 (36.0) 915 (36.0) 915 (36)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 390 (103) 406 (107.3) 415 (109.6) 415 (109.6)
*) Spec conditions:
Bulldozer PAT Straight tilt Straight tilt Straight tilt
Rear attachment — — — —
Upper attachment ROPS canopy Steel cab, ROPS Steel cab, ROPS Steel cab, ROPS
Model qD85PX-15E0
D85PX-15
Item
OPERATING WEIGHT* kg (lb) 27550 (60,740) 27650 (60,960)
TRACTOR WEIGHT kg (lb) 23320 (51,410) 23500 (51,810)
HORSEPOWER SAE J1995 Gross kW (HP)/RPM 199 (266)/1900
ISO9249/SAE J1349 Net (at min. fan speed) kW (HP)/RPM 197 (264)/1900
ISO9249/SAE J1349 Net (at max. fan speed) kW (HP)/RPM 179 (240)/1900 179 (240)/1900
PERFORMANCE:
Travel speed Forward 1st km/h (MPH) 3.6 (2.2) 3.3 (2.1)
2nd 6.0 (3.7) 6.0 (3.7)
3rd 10.0 (6.2) 10.0 (6.2)
Reverse 1st 4.7 (2.9)
2nd 7.9 (4.9)
3rd 12.7 (7.9) 12.7 (7.9)
Max. drawbar pull kg (lb/kN) — —
DIMENSIONS:
Overall length (tractor) mm (ft.in) 4720 (15'6") 4720 (15'6")
Overall length* mm (ft.in) 6065 (19'11") 6065 (19'11")
Overall width (w/o trunnion) mm (ft.in) 3160 (10'4") 3160 (10'4")
Overall width (with blade)* mm (ft.in) 4365 (14'4") 4365 (14'4")
Overall height (tractor)** mm (ft.in)
Overall height* mm (ft.in) 3330 (10'11") 3330 (10'11")
Track gauge mm (ft.in) 2250 (7'5") 2250 (7'5")
Length of track on ground mm (ft.in) 3480 (11'5") 3480 (11'5")
ENGINE: KOMATSU KOMATSU
Model SA6D125E SAA6D125E-5
No.of cylinders- mm (in) 6-125 x 150 6-125 × 150
bore × stroke (4.9 x 5.9) (4.92 × 5.91)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674)
UNDERCARRIAGE:
No.of rollers (carrier/track) 2/8 2/8
Width of standard shoe mm (in) 910 (35.8) 910 (36)
FUEL TANK CAPACITY (Refilled): ltr. (U.S.Gal) 490 (129) 490 (129)
*) Spec conditions:
Bulldozer Straight tilt Straight tilt
Rear attachment — —
Upper attachment Steel cab, ROPS Steel cab, ROPS
** : Without canopy, exhaust pipe, pre-cleaner cap or other easily removed encumbrances.
q : Tier 3 and stage 3A model
1A-15
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D65EX-15E0, D65WA-15E0,
D61EX-15 D65E-12 D65EX-15, D65WX-15
US ton kN ton
50
US ton kN ton
50
50
50
400 40
400 40 40
F1
40
Drawbar Pull
300 30
Drawbar Pull
300 F1
30 30
30 F2
200 20
200 20 20
20 F3
F2
100 10
10
100 10
10
F3
0 0 0
0 0 0 0 2 4 6 8 10 12 km/h
0 2 4 6 8 10 12 km/h
0 1 2 3 4 5 6 7 mph
0 1 2 3 4 5 6 7 mph
Travel Speed
Travel Speed FVDM1370
FVDM1660
200 F1
DRAWBAR PULL
20 30
300 60 F1
40
F2
F2 200 20
40
100 10 F3
20
F3
100 20 10
0 0 0
0 0 0 0 2 4 6 8 10 km/h
0 2 4 6 8 10 12 14 km/h
0 1 2 3 4 5 6 MPH
0 1 2 3 4 5 6 7 8 MPH
TRABEL SPEED TRAVEL SPEED
FVBH0316 FVBH0265
3 3
x kN x 10 lbkg x 10 kg
ton
kN
70 44 480 48
700
140
40 440 44
60
600
120 36 400 40
32 360 36
DRAWBAR PULL
50
500 100 320 32
DRAWBAR PULL
28 F1
F1
40 280 28
400 80 24
240 24
F2 20
300 60
30 200 20
16 F2
160 16
200 20 F3 12
40 120 12
8 80 8
100 20 10 F3
4 40 4
0 0 0 0 0 0
0 2 4 6 8 10 12 14 km/h
0 2 4 6 8 10 12 14 16 18 20km/h
0 1 2 3 4 5 6 7 8 MPH
0 2 4 6 8 10 12 MPH
TRABEL SPEED 0
FVBH0264 Travel speed
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-16
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D155AX-5 D155A-2A
USton
lb x 103
ton
kN
Ton
kN
480 48
44 500 120 50
440 44
40 450 100 45
400 40
36 90 40
360 36 400
32 80
320 32 350 35
28 F1 70
Drawbar pull
280 28 F1
300 30
Rimpull
24 240 24 60
250 25
20 200 20 50
200 20 F2
16 160 16 F2 40
150 15
12 120 12 30
F3
8 80 100 20 10
8 F3
4 40 4 50 10 5
0 0 0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 km/h 0 2 4 6 8 10 12 14km/h
0 2 4 6 8 10 12 MPH 0 2 4 6 8 MPH
0
Travel speed Travel speed
70 60
Automatic F1
600 60 gearshift mode
500
Manual 50
gearshift mode
60
50 F2
500 50
400 40
50
Drawbar Pull
F1 40
400
Drawbar Pull
40
40 F3
300
30
300 30 30
30
200 20
200 20 20
20
F2
0 0 0
0 2 4 6 8 10 12 km/h 0 0 0
0 2 4 6 8 10 12 km/h
0 1 2 3 4 5 6 7 mph
0 1 2 3 4 5 6 7 mph
Travel Speed Travel Speed
200 90
F1 (T/C
50 F2
400 40 80
)
DRAWBAR PULL
40
Drawbar Pull
70
150
F3 F1 Lockup
300 60
30
F2
30
(T/C
50
)
100
200 20 F2 Lockup
40
20 F1 (LOCK UP)
F3
30 (T
F3 Lockup /C
)
100 10 50 F2 (LOCK UP)
10 20
F3 (LOCK UP)
10
0 0 0
0 2 4 6 8 10 12 km/h 0 0
0 2 4 6 8 10 12 km
0 1 2 3 4 5 6 7 mph
0 1 2 3 4 5 6 7 8 mph
Travel Speed
TRAVEL SPEED FZD00358
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-17
Drawbar Pull vs. CRAWLER-TYPE
Travel Speed TRACTORS
D475A-5E0, D475ASD-5E0
D475A-5, D475A-5 SD D575A-3
US ton
US Ton
ton
kN
Ton
kN
1200130 120 1800
200 180
1100120 110
180 1600 160
1000110100
F1
160 1400 140
900100 90 F1(Lockup)
140
F1 1200 120
DRAWBAR PULL
800 90 80
120
1000 100 F2
700 80 70
DRAWBAR PULL
D575A-3 SD D61PX-15
US ton kN ton
50
50
400 40
40
Drawbar Pull
300 F1
30
30
200 20
20
F2
100 10
10
F3
0 0 0
0 2 4 6 8 10 12 km/h
0 1 2 3 4 5 6 7 mph
Travel Speed
FVDM1660
400 60
40 600
120
40
DRAWBAR PULL
F1 50
500 100
Drawbar Pull
300 30 F1
40
30 400 80
F2
F2
300 30
200 60
20
20
F3 200 40 20 F3
100 10
10 100 20 10
0 0 0
0 2 4 6 8 10 12 14 km/h
0 0 0
0 2 4 6 8 10 12 km/h 0 1 2 3 4 5 6 7 8 MPH
TRABEL SPEED
0 1 2 3 4 5 6 7 mph FVBH0264A
Travel Speed
FVDM1370
NOTE: THE DRAWBAR PULL AND TRAVEL SPEED MAY BE SUBJECT TO CHANGE DEPENDING ON
THE GROUND CONDITIONS AND MACHINE WEIGHT.
1A-18
Ground Pressure CRAWLER-TYPE
TRACTORS
Definition: Ground pressure = tractor machine operating weight / total ground contact area where;
total ground contact area = length of track on ground × shoe width × 2.
* : Standard shoe
*** : With inside power angle-tilt dozer
*** : Long track spec.
* : Standard shoe
** : See the classification of shoe application
1A-19
Ground Pressure CRAWLER-TYPE
TRACTORS
Definition: Ground pressure = tractor machine operating weight / total ground contact area where;
total ground contact area = length of track on ground × shoe width × 2.
* : Standard shoe
** : See the classification of shoe application
* : Standard shoe
1A-20
Shoe Application CRAWLER-TYPE
TRACTORS
Classification of the applications:
Classification Applicable terrain Limitations
These can be used over a wide range of general civil
Rocky terrain, general engineering work from crushed rock to preparation of
A terrain residential land. There is no particular limitation on their
use.
These are used for general earthmoving work where the
main work is scraping operations and pushing operations
when constructing golf courses, and overburden stripping
B General or soft terrain operations in coal mines.
They cannot be used on rocky ground. Be careful to avoid
traveling over rocks when carrying out operations on job
sites where there are scattered rocks.
These are used on soft ground where B classification
C Extremely soft terrain shoes would sink. These cannot be used on ground where
(swamps) there are scattered rocks.
NOTE: Select the proper shoe width for your customers, by taking the limitations described above into
consideration, (especially on wide shoes "B" and "C").
Select the narrowest possible shoes, depending on the flotation and ground pressure of the
machines. If the shoe is too wide, the load on the track shoe increases and results in bends in the
shoes, cracks in the links, breakage and slipping out of the pins and loosening of the bolts.
1A-21
Shoe Selection CRAWLER-TYPE
TRACTORS
Applications of different shoes in accordance with soil characteristics and working conditions.
Applicable soil and
Type of shoe Advantages Disadvantages Remarks
work
1 Single grouser shoe • Because the shape of the • Strength is somewhat Is available in
grouser is sharp, it easily reduced on rocky ground, various widths to
bites into the ground and and bending and other suit the softness
provides a large traction damage may occur. of the soil.
General soil force. • The riding conform is a
excluding rocky little inferior to the triple
ground and double grouser shoes.
(for bulldozer) • The road surface is liable
to be roughed.
• The turning resistance is
large.
3 • Tripple grouser shoe • The three grousers have • This shoe does not readily
• Double grouser shoe the same height, hence bite into the ground, so the
Hard ground turning ability is good. traction force is low.
Suitable for both soft • Good riding comfort is
and hard ground obtained as compared with
(for hydraulic a single grouser shoe.
excavator and dozer • Rotating resistance is low.
shovel) • Because three beams are
used, resistance to
bending is high.
4 Swamp shoe • Because the cross-section • Unsuitable for ground other Various widths are
of this shoe is an arc, the than swampy ground. available to suit
ground contact area is When used off swampy the degree of
large, and buoyancy is ground, it is liable to bend softness of the
easily obtained. due to its low strength. swampy ground.
• This shoe is particularly
suitable for use in swamp
Swamp areas areas and areas with low
(for swamp dozer) ground pressure. The
ground surface is not
damaged when the
machine travels over it, so
it is suitable for soil
compaction and leveling
work.
1A-22
Shoe Selection CRAWLER-TYPE
TRACTORS
Applicable soil and
Type of shoe Advantages Disadvantages Remarks
work
7 Road liner (rubber) • The surface of the shoe in • Use in the following places
contact with the ground is will shorten the cutting life
made of rubber, so the of the rubber.
machine can travel on (1) Rocky ground
paved roads without (2) Cold areas
Paved road damaging the road (below -25ºC)
Indoor work surface. (3) Hot areas
• Prevents noise when (above 65ºC)
machine is traveling. • Because there are no
grouser, this shoe does not
bite into the ground.
1A-23
Roller Guard Installation CRAWLER-TYPE
TRACTORS
Local
add-on type
Determination criterion for
different working environments
Rocks and soil containing boulders The part is effective for prevention of catching pebbles.
and gravel (A and E)
Sand and sandy soil The part is effective for prevention of pitch squeaking.
(A, E and P)
Clayey soil (P and PL) Be careful when using this part since the soil sets when dried. (Note 1)
Swamp (PL and PLL) The part is effective for prevention of snaking of the track.
(Prevents side sliding of the track shoes.) (Note 1)
The part is effective for prevention of disengagement of the track shoes.
Slopes The part is effective for prevention of disengagement of the track shoes.
(Prevents side-sliding of the track shoes.)
(Note 1) Although soil and sand tend to enter less, once they enter, they may not be easily discharged
depending on the type of soil, so make the choice in consideration of past experience with machines
having been used in the subject area and of the working environments of the machine.
NOTE: Please consult your local distributor for availability of track rollers guard for the model that you
require.
1A-24
Roller Guard installation CRAWLER-TYPE
TRACTORS
Large Class
When using bulldozers, it is necessary to make most appropriate choices of the track roller guards fitting to
respective working environments. Given below are the criterion for the choices.
This chart provides clearer criterion for the choices in consideration of respective functions of different
types of track roller guards.
(Note 1) Although soil and sand tend to enter less, once they enter, they may not be easily discharged depending on the
type of soil, so make the choice in consideration of past experience with machines having been used in the
subject area and of the working environments of the machine.
NOTE: Please consult your local distributor for availability of track rollers guard for the model that you
require.
1A-25
Upper Attachment CRAWLER-TYPE
TRACTORS
OVERALL HEIGHT
G.L
1A-26
SECTION 1B
BULLDOZERS
CONTENTS
Blade selection ......................................................... 1B-2
Blade availability ...................................................... 1B-4
Blade specifications:
Straight-tiltdozer .................................................. 1B-6
Angledozer ........................................................... 1B-8
Power angle-tiltdozer ........................................ 1B-10
Semi-U-tildozer .................................................. 1B-13
Sigmadozer ........................................................ 1B-16
U-tildozer ............................................................ 1B-17
Super dozer ........................................................ 1B-19
Coal dozer .......................................................... 1B-20
Production .............................................................. 1B-21
1B-1
Blade Selection BULLDOZERS
Straight-tilltdozer
Having a high HP/ cutting edge length, this blade has
an aggressive penetration. This blade also has a high
HP/loose cubic yards for easy handling of heavy
materials. The tilting function of this blade increases
production and versatility. With a sturdy construction,
this blade is suitable for powerful cutting and dozing,
especially heavy cutting on rocky ground.
Straight dozer
This blade has the same structure and functions but is
not equipped with a tilt-cylinder.
Angle dozer
The blade can be set straight or angled to both sides.
Plowing earth or snow to one side is possible by
angling the blade.
Useful for road construction, back filling etc.
Power angle-tiltdozer
Power angling and tilting of the blade are possible from
the operator seat. This blade is applicable for versatile
works such as grading, back filling, spreading and light
land clearing
Dual tiltdozer
The blade has two tilt cylinders on both sides. An
optimum blade cutting angle for all types of materials
and ground inclinations can be selected for increased
loads and consequently increased production. A fast tilt
speed and a large tilt angle also concentrate blade
force where maximum penetration is needed.
Semi U-tiltdozer
The blade combines penetration ability of straight blade
with increased load capacity provided by short wings
which include only the end bits.
1B-2
Blade Selection BULLDOZERS
U-tiltdozer
The wings on this blade minimize material spillage.
Since this blade has a lower HP/loose cubic yards than
a straight-tiltdozer, this blade is suitable for moving
lighter or loose materials over long distances.
Suitable works are land reclamation, stockpiling and
other similar jobs.
Coal dozer
Specialized blade for pushing coal, with larger width
and deep angled wings.
Rake-dozer
Having teeth, this blade provides good penetration into
the soil for removal of stumps, roots and rocks.
Sigmadozer
A new frontal design concept adopted for digging and
rolling up at the center of the blade increases soil
holding capacity, simultaneously reducing sideway
spillage. Reduced digging resistance produces
smoother flow of earth, enabling the dozing of large
quantities of soil with less power.
1B-3
Blade Availability BULLDOZERS
1B-4
Blade Availability BULLDOZERS
1B-5
Blade Specifications BULLDOZERS
Straight-tiltdozer
F G.L
B A
Model
D65E-12 D65P-12 D65EX-15 D65EX-15E0
Item
OPERATING WEIGHT* kg (lb) 17470 (38,510) 18860 (41,580) 19070 (42,040) 19270 (42,480)
BLADE CAPACITY LH2** m3 (yd3) 5.12 (6.70) 4.80 (6.28) 5.12 (6.70) 5.12 (6.70)
SAE 3.89 (5.09) 3.69 (4.83) 3.89 (5.09) 3.89 (5.09)
DIMENSION*
A Overall length mm (ft.in) 5260 (17'3") 5550 (18'3") 5210 (17'1") 5210 (17' 1")
B Overall width mm (ft.in) 3415 (11'2") 3970 (13') 3415 (11'2") 3415 (11' 2")
C Overall height mm (ft.in) 2980 (9'9") 3025 (9'11") 2990 (9'10") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.64 (9.10) 0.30 (4.27) 0.70 (9.95) 0.73 (10.4)
DOZER EQUIPMENT
Weight kg (lb) 2600 (5,730) 2620 (5,780) 2720 (5,995) 2720 (6000)
(Includes hydraulic control unit) 2720 (6,000)
Length mm (ft.in) 3415 (11'2") 3970 (13') 3415 (11'2") 3415 (11' 2")
Height mm (ft.in) 1225 (4'1") 1100 (3'7") 1225 (4'0") 1225 (4'0")
D Max. lift above ground mm (ft.in) 1100 (3'7") 1200 (3'11") 1105 (3'8") 1105 (3' 8")
E Max. drop below ground mm (ft.in) 450 (1'6") 445 (1'6") 440 (1'5") 440 (1' 5")
F Max. tilting adjustment mm (ft.in) 870 (2'10") 890 (2'11") 870 (2'10") 870 (2'10")
Digging angle degree 55 57 55 55
Model
D65PX-15 D65PX-15E0 D85E-SS-2A D85EX-15
Item
OPERATING WEIGHT* kg (lb) 20070 (44,250) 20270 (44,690) 18230 (40,190) 24370 (53,730)
BLADE CAPACITY LH2** m3 (yd3) 4.80 (6.28) 4.80 (6.28) 6.1 (7.98) 7.7 (10.07)
SAE 3.69 (4.83) 3.69 (4.83) 4.4 (5.76) 5.2 (6.8)
DIMENSION*
A Overall length mm (ft.in) 5520 (18'1") 5520 (18'1") 5615 (18'5") 5640 (18'6")
B Overall width mm (ft.in) 3970 (13') 3970 (13'0") 3620 (11'11") 3715 (12'2")
C Overall height mm (ft.in) 2990 (9'10") 2990 (9'10") 2980 (9'9") 3330 (10'11")
Ground pressure kg/cm2 (PSI) 0.33 (4.69) 0.34 (4.83) 0.60 (8.53) 0.74 (10.5)
DOZER EQUIPMENT
Weight kg (lb) 2740 (6,040) 2740 (6,050) 2810 (6,190) 3305 (7,290)
(Includes hydraulic control unit)
Length mm (ft.in) 3970 (13'0") 3970 (13'0") 3620 (11'11") 3715 (12'2")
Height mm (ft.in) 1100 (3'7") 1100 (3'7") 1295 (4'3") 1436 (4'9")
D Max. lift above ground mm (ft.in) 1105 (3'8") 1105 (3'8") 1070 (3'6") 1207 (4')
E Max. drop below ground mm (ft.in) 540 (1'9") 540 (1'9") 590 (1'11") 540 (1'9")
F Max. tilting adjustment mm (ft.in) 450 (1'6") 450 (1'6") 920 (3') 750 (2'6")
Digging angle degree 57 57 55 55
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
1B-6
Blade Specifications BULLDOZERS
Straight-tiltdozer
F G.L
B A
Model
D85EX-15E0 D85PX-15 D85PX-15E0
Item
OPERATING WEIGHT* kg (lb) 24550 (54,120) 26690 (58,840) 26870 (59,240)
BLADE CAPACITY LH2** m3 (yd3) 7.66 (10.02) 8.2 (10.73) 8.19 (10.72)
SAE 5.2 (6.8) 5.9 (7.7) 5.9 (7.7)
DIMENSION*
A Overall length mm (ft.in) 5640 (18'6") 6065 (19'11") 6065 (19'11")
B Overall width mm (ft.in) 3715 (12'2") 4365 (14'4") 4365 (14'4")
C Overall height mm (ft.in) 3330 (10'11") 3330 (10'11") 3330 (10'11")
Ground pressure kg/cm2 (PSI) 0.72 (10.21) 0.43 (6.1) 0.42 (6.03)
DOZER EQUIPMENT
Weight kg (lb) 3329 (7,343) 3345 (7,375) 3366 (7,421)
(Includes hydraulic control unit)
Length mm (ft.in) 3715 (12'2") 4365 (14'4") 4365 (14'4")
Height mm (ft.in) 1436 (4'9") 1370 (4'6") 1370 (4'6")
D Max. lift above ground mm (ft.in) 1210 (4') 1222 (4') 1230 (4')
E Max. drop below ground mm (ft.in) 540 (1'9") 568 (1'10") 570 (1'10")
F Max. tilting adjustment mm (ft.in) 750 (2'6") 500 (1'8") 500 (1'8")
Digging angle degree 55 55 55
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
1B-7
Blade Specifications BULLDOZERS
Angledozer
D
F
G.L
B A
Model
D68ESS-12 D65E-12 D65EX-15 D65EX-15E0
Item
OPERATING WEIGHT* kg (lb) 16940 (37,350) 17690 (39,000) 19280 (42,500) 19550 (43,100)
BLADE CAPACITY LH2** m3 (yd3) 3.6 (4.71) 4.80 (6.28) 4.80 (6.28) 4.80 (6.28)
SAE 2.6 (3.40) 3.55 (4.64) 3.55 (4.64) 3.55 (4.64)
DIMENSION*
A Overall length mm (ft.in) 5930 (19'5") 5470 (17'11") 5470 (17'11") 5470 (17'11")
B Overall width mm (ft.in) 3970 (13') 3970 (13') 3970 (13') 3970 (13'0")
C Overall height mm (ft.in) 3140 (10'4") 2980 (9'9") 2990 (9'10") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.54 (7.68) 0.65 (9.2) 0.71 (10.1) 0.72 (10.18)
DOZER EQUIPMENT
Weight kg(lb) 2660 (5,860) 2820 (6,220) 2930 (5,860) 2930 (6,460)
(Includes hydraulic control unit) 2930 (6,460)
Length mm (ft.in) 3970 (13') 3970 (13') 3970 (13') 3970 (13'0")
Height mm (ft.in) 950 (3'1") 1100 (3'7") 1100 (3'7") 1100 (3' 7")
D Max. lift above ground mm (ft.in) 1205 (3'11") 1180 (3'10") 1185 (3'11") 1185 (3'11")
E Max. drop below ground mm (ft.in) 535 (1'9") 460 (1'6") 450 (1'6") 450 (1' 6")
F Max. tilting adjustment mm (ft.in) 400 (1'4") 400 (1'4") 400 (1'4") 400 (1' 4")
Digging angle degree 50 56.5 56.5 56.5
Model
D85ESS-2 D85ESS-2A D85A-21
Item
OPERATING WEIGHT* kg (lb) 19170 (42,260) 18850 (41,560) 23320 (51,410)
BLADE CAPACITY LH2** m3 (yd3) 5.0 (6.54) 5.0 (6.54) 5.6 (7.32)
SAE 3.4 (4.45) 3.4 (4.45) 3.9 (5.10)
DIMENSION*
A Overall length mm (ft.in) 5930 (19'5") 5930 (19'5") 5810 (19'1")
B Overall width mm (ft.in) 4370 (14'4") 4370 (14'4") 4365 (14'4")
C Overall height mm (ft.in) 2560 (8'5") 2980 (9'9") 3365 (11')
Ground pressure kg/cm2 (PSI) 0.52 (7.39) 0.62 (8.82) 0.73 (10.38)
DOZER EQUIPMENT
Weight kg (lb) 2890 (6,370) 3430 (7,560) 4610 (10,160)
(Includes hydraulic control unit)
Length mm (ft.in) 4370 (14'4") 4370 (14'4") 4365 (14'4")
Height mm (ft.in) 1070 (3'6") 1070 (3'6") 1130 (3'8")
D Max. lift above ground mm (ft.in) 1255 (4'1") 1255 (4'1") 1310 (4'4")
E Max. drop below ground mm (ft.in) 485 (1'7") 485 (1'7") 560 (1'10")
F Max. tilting adjustment mm (ft.in) 400 (1'4") 400 (1'4") 500 (1'8")
Digging angle degree 56 56 55.6
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : With winch and sweep canopy
1B-8
Blade Specifications BULLDOZERS
Angledozer
D
F
G.L
B A
Model
D85EX-15E0*4 D85A-21B D85E-21 D155A-2A
Item
OPERATING WEIGHT* kg (lb) 24974 (55,053) 22860 (50,400) 23680 (52,200) 34390 (75,820)
BLADE CAPACITY LH2** m3 (yd3) 5.77 (7.54) 5.6 (7.32) 5.6 (7.32) 6.30 (8.64)
SAE 4.0 (5.2) 3.9 (5.10) 3.9 (5.10) 4.58 (5.99)
DIMENSION*
A Overall length mm (ft.in) 6035 (19'10") 6100 (20') 6020 (19'9") 6620 (21'9")
B Overall width mm (ft.in) 4515 (14'10") 4365 (14'4") 4365 (14'4") 4850 (15'11")
C Overall height mm (ft.in) 3330 (10'11") 3365 (11') 3365 (11') 3725 (12'3")
Ground pressure kg/cm2 (PSI) 0.73 (10.39) 0.75 (10.67) 0.69 (9.81) 0.975 (13.86)
DOZER EQUIPMENT
Weight kg (lb) 3754 (8,273) 4610 (10,160) 4610 (10,160) 6520 (14,370)
(Includes hydraulic control unit)
Length mm (ft.in) 4515 (14'10") 4635 (14'4") 4365 (14'4") 4850 (15'11")
Height mm (ft.in) 1130 (3'8") 1130 (3'8") 1130 (3'8") 1140 (3'9")
D Max. lift above ground mm (ft.in) 1173 (3'10") 1310 (4'4") 1425 (4'8") 1520 (5')
E Max. drop below ground mm (ft.in) 760 (2'6") 560 (1'10") 580 (1'11") 630 (2'1")
F Max. tilting adjustment mm (ft.in) 520 (1'8") 500 (1'8") 500 (1'8") 400 (1'4")
Digging angle degree 55 55.6 55.6 55
Model
D155A-5 D155AX-5 D155AX-6
Item
OPERATING WEIGHT* kg (lb) 33040 (72,840) 34540 (76,150) 36170 (79,750)
BLADE CAPACITY LH2** m3 (yd3) 7.00 (9.16) 7.00 (9.16) 7.04 (9.21)
SAE 4.9 (6.4) 4.9 (6.4) 4.6 (6.0)
DIMENSION*
A Overall length mm (ft.in) 6502 (21'4") 6510 (21'4") 6743 (22'1")
B Overall width mm (ft.in) 4850 (15'11") 4850 (15'11") 4850 (15'11")
C Overall height mm (ft.in) 3395 (11'2") 3395 (11'2") 3385 (11'1")
Ground pressure kg/cm2 (PSI) 0.92 (13.1) 0.96 (13.65) 0.99 (14.02)
DOZER EQUIPMENT
Weight kg (lb) 5140 (11,330) 5140 (11,330) 5170 (11,400)
(Includes hydraulic control unit)
Length mm (ft.in) 4850 (15'11") 4850 (15'11") 4850 (15'11")
Height mm (ft.in) 1205 (3'11") 1205 (3'11") 1205 (3'11")
D Max. lift above ground mm (ft.in) 1295 (4'3") 1295 (4'3") 1562 (5'1")
E Max. drop below ground mm (ft.in) 745 (2'5") 745 (2'5") 664 (2'2")
F Max. tilting adjustment mm (ft.in) 520 (1'8") 520 (1'8") 520 (1'8")
Digging angle degree 55 55 56
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : With winch and sweep canopy
*4 : Mechanical angle power tiltdozer
1B-9
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D21A-8 D21P-8 D31EX-21 D31PX-21
Item
OPERATING WEIGHT* kg (lb) 3710 (8,180) 4100 (9,040) 6820 (15,040) 7340 (16,180)
2** m3 (yd3)
BLADE CAPACITY LH 0.76 (0.99) 0.89 (1.16) 1.74 (2.28) 1.80 (2.35)
SAE 0.57 (0.75) 0.68 (0.89) 1.49 (1.95) 1.55 (2.03)
DIMENSION*
A Overall length mm (ft.in) 3250 (10'8") 3260 (10'8") 4015 (13'2") 3995 (13'1")
B Overall width mm (ft.in) 2170 (7'11") 2560 (8'5") 2435 (8'0") 3200 (10'6")
C Overall height mm (ft.in) 2315 (7'7") 2335 (7'8") 2645 (8'8") 2645 (8'8")
Ground pressure kg/cm2 (PSI) 0.37 (5.26) 0.24 (3.41) 0.42 (5.97) 0.28 (3.98)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 550 (1,210) 580 (1280) 1045 (2,300) 1120 (2,470)
(Includes hydraulic control unit)
Length mm (ft.in) 2170 (7'11") 2560 (8'5") 2435 (8'0") 3200 (10'6")
Height mm (ft.in) 590 (1'11") 590 (1'11") 845 (2'9") 750 (2'6")
D Max. lift above ground mm (ft.in) 790 (2'7") 850 (2'9") 860 (2'10") 855 (2'10")
E Max. drop below ground mm (ft.in) 385 (1'3") 325 (1'1") 385 (1'3") 380 (1'3")
F Max. tilting adjustment mm (ft.in) 250 (9'8") 280 (11") 330 (1'1") 435 (1'5")
Model
D37EX-21 D37PX-21 D39EX-21 D39PX-21
Item
OPERATING WEIGHT* kg (lb) 7100 (15,650) 7460 (16,450) 8210 (18,100) 8590 (18,940)
BLADE CAPACITY LH2** m3 (yd3) 2.04 (3.24) 2.24 (3.52) 2.63 (3.14) 2.78 (3.40)
SAE 1.75 (2.29) 1.91 (2.50) 2.22 (2.90) 2.32 (3.03)
DIMENSION*
A Overall length mm (ft.in) 4015 (13'2") 3995 (13'1") 4200 (13'9") 4200 (13'9")
B Overall width mm (ft.in) 2720 (8'11") 3250 (10'8") 2740 (9'0") 3330 (10'11'')
C Overall height mm (ft.in) 2645 (8'8") 2645 (8'8") 2720 (8'11") 2720 (8'11")
Ground pressure kg/cm2 (PSI) 0.40 (5.69) 0.28 (3.98) 0.38 (5.40) 0.29 (4.12)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 1090 (2,400) 1150 (2,540) 1260 (2,780) 1360 (3,000)
(Includes hydraulic control unit)
Length mm (ft.in) 2720 (8'11") 3250 (10'8") 2740 (9'0") 3330 (10'11")
Height mm (ft.in) 865 (2'10") 830 (2'9") 980 (3'3") 910 (3'0")
D Max. lift above ground mm (ft.in) 860 (2'10") 855 (2'10") 890 (2'11") 890 (2'11")
E Max. drop below ground mm (ft.in) 385 (1'3") 380 (1'3") 440 (1'5") 440 (1'5")
F Max. tilting adjustment mm (ft.in) 375 (1'3") 445 (1'6") 395 (1'4") 480 (1'7")
1B-10
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D41E-6 D41E-6*** D41P-6 D41P-6***
Item
OPERATING WEIGHT* kg (lb) 10590 (23,345) 10670 (25,145) 11170 (24,625) 11250 (24,805)
BLADE CAPACITY LH2** m3 (yd3) 3.4 (4.45) 3.8 (4.92) 3.4 (4.45) 3.8 (4.92)
SAE 2.6 (3.40) 2.9 (3.79) 2.6 (4.12) 2.9 (3.79)
DIMENSION*
A Overall length mm (ft.in) 4880 (16') 4880 (16') 4880 (16') 4880 (16')
B Overall width mm (ft.in) 3045 (10') 3350 (11') 3045 (10') 3350 (11')
C Overall height mm (ft.in) 2675 (8'9") 2675 (8'9") 2675 (8'9") 2675 (8'9")
Ground pressure kg/cm2 (PSI) 0.42 (5.97) 0.42 (5.97) 0.29 (4.12) 0.29 (4.12)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 1800 (3,965) 1880 (4,145) 1800 (3,965) 1880 (4,145)
(Includes hydraulic control unit)
Length mm (ft.in) 3045 (10') 3350 (11') 3045 (10') 3350 (11')
Height mm (ft.in) 1060 (3'6") 1060 (3'6") 1060 (3'6") 1060 (3'6")
D Max. lift above ground mm (ft.in) 1010 (3'4") 1010 (3'4") 1010 (3'4") 1010 (3'4")
E Max. drop below ground mm (ft.in) 490 (1'7") 490 (1'7") 490 (1'7") 490 (1'7")
F Max. tilting adjustment mm (ft.in) L:485 (1'7") L:530 (1'9") L:485 (1'7") L:530 (1'9")
R:645 (2'1") R:710 (2'4") R:645 (2'1") R:710 (2'4")
Angling angle (L/R) degree 55/25 55/25 55/25 30/25
Model
D61EX-15 D61EX-15*** D61EX-15*4 D61PX-15
Item
OPERATING WEIGHT* kg (lb) 16130 (35,560) 16290 (35,910) 16840 (37,130) 17750 (39,130)
2** m3 (yd3)
BLADE CAPACITY LH 4.7 (6.1) 5.2 (6.8) 4.7 (6.1) 5.2 (6.8)
SAE 3.4 (4.4) 3.8 (5.0) 3.4 (4.4) 3.8 (5.0)
DIMENSION*
A Overall length mm (ft.in) 5030 (16'6") 5030 (16'6") 5450 (17'11") 5440 (17'10")
B Overall width mm (ft.in) 3275 (10'9") 3860 (12'8") 3275 (10'9") 3860 (12'8")
C Overall height mm (ft.in) 2945 (9'8") 2945 (9'8") 2945 (9'8") 2945 (9'8")
Ground pressure kg/cm2 (PSI) 0.52 (7.39) 0.52 (7.39) 0.44 (6.26) 0.33 (4.69)
DOZER EQUIPMENT
Type Inside mount Inside mount Inside mount Inside mount
Weight kg (lb) 2400 (5,290) 2560 (5,640) 2540 (5,600) 2700 (5,950)
(Includes hydraulic control unit)
Length mm (ft.in) 3275 (10'9") 3860 (12'8") 3275 (10'9") 3860 (12'8")
Height mm (ft.in) 1200 (3'11") 1160 (3'10") 1200 (3'11") 1160 (3'10")
D Max. lift above ground mm (ft.in) 980 (3'3") 980 (3'3") 1025 (3'4") 1025 (3'4")
E Max. drop below ground mm (ft.in) 465 (1'6") 465 (1'6") 580 (1'11") 580 (1'11")
F Max. tilting adjustment mm (ft.in) 510 (1'8") 600 (2') 510 (1'8") 600 (2')
1B-11
Blade Specifications BULLDOZERS
Power Angle-tiltdozer
D
G.L
F
E
B A
Model
D68ESS-12*4
Item
OPERATING WEIGHT* kg (lb) 18,800 (41,500)
DOZER EQUIPMENT
Type Inside mount
Weight kg (lb) 2,360 (5,205)
(Includes hydraulic control unit)
Length mm (ft.in) 3275 (10'9")
Height mm (ft.in) 1200 (3'11")
D Max. lift above ground mm (ft.in) 1055 (3'6")
E Max. drop below ground mm (ft.in) 560 (1'10")
F Max. tilting adjustment mm (ft.in) 510 (1'9")
1B-12
Blade Specifications BULLDOZERS
Semi-U-tiltdozer
Model
D61EX-15 D65E-12 D65EX-15 D65EX-15E0
Item
OPERATING WEIGHT* kg (lb) 16160 (34,190) 18500 (40,780) 19350 (42,600) 19550 (43,100)
BLADE CAPACITY LH2** m3 (yd3) 5.4 (7.1) 6.8 (8.9) 7.03 (9.19) 7.03 (9.19)
SAE 4.3 (5.6) 5.6 (7.3) 5.61 (7.34) 5.61 (7.34)
DIMENSION*
A Overall length mm (ft.in) 5050 (16'7") 5440 (17'10") 5210 (17'1") 5440 (17'10")
B Overall width mm (ft.in) 3175 (10'5") 3460 (11'4") 3460 (11'4") 3460 (11' 4")
C Overall height mm (ft.in) 2945 (8'2") 2990 (9'10") 2990 (9'10") 2990 (9'10")
Ground pressure kg/cm2 (PSI) 0.52 (7.39) 0.68(9.67) 0.71 (10.1) 0.72 (10.18)
DOZER EQUIPMENT
Weight kg (lb) 2430 (5,360) 2880 (6,350) 3000 (7,890) 3000 (6,610)
(Includes hydraulic control unit)
Length mm (ft.in) 3175 (10'5") 3460 (11'4") 3460 (11'4") 3460 (11' 4")
Height mm (ft.in) 1300 (4'3") 1425 (4'8") 1425 (4'8") 1425 (4' 8")
D Max. lift above ground mm (ft.in) 970 (3'2") 1105 (3'8") 1105 (3'8") 1105 (3' 8")
E Max. drop below ground mm (ft.in) 545 (1'9") 440 (1'5") 440 (1'5") 440 (1' 5")
F Max. tilting adjustment mm (ft.in) 690 (2'3") 465 (1'6") 855 (2'10") 855 (2'10")
Model
D65EX-15*4 D65WX-15 D65WX-15E0 D85EX-15
Item
OPERATING WEIGHT* kg (lb) 20090 (44,290) 20240 (44,620) 20410 (44,990) 24640 (54,330)
2** m3 (yd3)
BLADE CAPACITY LH 7.03 (9.19) 7.24 (9.47) 7.24 (9.46) 9.1 (11.90)
SAE 5.61 (7.34) 6.23 (8.15) 6.23 (8.15) 7.0 (9.2)
DIMENSION*
A Overall length mm (ft.in) 5750 (18'10") 5440 (17'10") 5440 (17'10") 5795 (19')
B Overall width mm (ft.in) 3460 (11'4") 3640 (11'11") 3640 (11'11") 3635 (11'11")
C Overall height mm (ft.in) 2990 (9'10") 2990 (9'10") 2990 (9'10") 3330 (10'11")
Ground pressure kg/cm2 (PSI) 0.60 (8.53) 0.47 (6.68) 0.47 (6.68) 0.75 (10.7)
DOZER EQUIPMENT
Weight kg (lb) 3000 (7,890) 3080 (6,790) 3080 (6,790) 3575 (7,890)
(Includes hydraulic control unit)
Length mm (ft.in) 3460 (11'4") 3640 (11'11") 3640 (11'11") 3635 (11'11")
Height mm (ft.in) 1425 (4'8") 1410 (4'8") 1410 (4'8") 1580 (5'2")
D Max. lift above ground mm (ft.in) 1105 (3'8") 1105 (3'8") 1105 (3'8") 1207 (4')
E Max. drop below ground mm (ft.in) 440 (1'5") 440 (1'5") 440 (1'5") 540 (1'9")
F Max. tilting adjustment mm (ft.in) 855 (2'10") 820 (2'8") 820 (2'8") 735 (2'5")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
*4 : Long track spec.
1B-13
Blade Specifications BULLDOZERS
Semi-U-tiltdozer
Model D155A-5
D85EX-15E0 D155AX-6 D155A-2A
Item D155AX-5
OPERATING WEIGHT* kg (lb) 24819 (54,723) 32800 (72,310) 35960 (79,280) 34560 (76,190)
34300 (75,620)
BLADE CAPACITY LH2** m3 (yd3) 9.07 (11.87) 11.7 (15.3) 13.23 (17.31) 13.2 (17.3)
SAE 7.0 (9.2) 8.8 (11.5) 9.4 (12.3) 9.4 (12.3)
DIMENSION*
A Overall length mm (ft.in) 5795 (19') 6300 (20'8") 6175 (20'3") 6560 (21'6")
B Overall width mm (ft.in) 3635 (11'11") 3955 (13') 4130 (13'7") 4130 (13'7")
C Overall height mm (ft.in) 3330 (10'11") 3395 (11'2") 3385 (11'1") 3420 (11'3")
Ground pressure kg/cm2 (PSI) 0.73 (10.32) 0.91 (12.94) 0.98 (13.94) 0.98 (13.94)
0.95 (13.51)
DOZER EQUIPMENT
Weight kg (lb) 3599 (7,943) 4900 (10,800) 4960 (10,936) 6690 (14,750)
(Includes hydraulic control unit)
Length mm (ft.in) 3635 (11'11") 3955 (13') 4130 (13'7") 4130 (13'7")
Height mm (ft.in) 1580 (5'2") 1720 (5'8") 1790 (5'10") 1790 (5'10")
D Max. lift above ground mm (ft.in) 1210 (4') 1250 (4'1") 1255 (4'1") 1560 (5'1")
E Max. drop below ground mm (ft.in) 540 (1'9") 590 (1'11") 593 (1'11") 560 (1'10")
F Max. tilting adjustment mm (ft.in) 735 (2'5") 1000 (3'3") 953 (3') 1020 (3'4")
D275AX-5E0 D275AX-5E0***
Model
D275A-5 D275A-5*** D375A-5 D375A-5E0
Item
D275AX-5 D275AX-5***
OPERATING WEIGHT* kg (lb) 45370 (100,020) 45270 (99,800) 60340 (133,030) 62700 (138,230)
BLADE CAPACITY LH2** m3 (yd3) 16.5 (21.6) 16.5 (21.6) 24.0 (31.4) 24.0 (31.4)
SAE 13.7 (17.9) 13.7 (17.9) 18.5 (24.2) 18.5 (24.2)
DIMENSION*
A Overall length mm (ft.in) 6930 (22'9") 6930 (22'9") 7635 (25'1") 7635 (25'1")
B Overall width mm (ft.in) 4300 (14'1") 4300 (14'1") 4695 (15'5") 4695 (15'5")
C Overall height mm (ft.in) 3965 (13'0") 3965 (13'0") 4035 (13'3") 4265 (7'5")
Ground pressure kg/cm2 (PSI) 1.06 (15.07) 1.09 (15.50) 1.29 (18.34) 1.29 (18.34)
1.06 (15.07) 1.09 (15.50)
DOZER EQUIPMENT
Weight kg (lb) 7507 (16,550) 7590 (16,730) 10540 (23,240) 10910 (24,050)
(Includes hydraulic control unit)
Length mm (ft.in) 4300 (14'1") 4300 (14'1") 4695 (15'5") 4695 (15'5")
Height mm (ft.in) 1960 (6'5") 1960 (6'5") 2265 (7'5") 2265 (7'5")
D Max. lift above ground mm (ft.in) 1450 (4'9") 1450 (4'9") 1660 (5'5") 1660 (5'5")
E Max. drop below ground mm (ft.in) 640 (2'1") 640 (2'1") 715 (2'4") 715 (2'4")
F Max. tilting adjustment mm (ft.in) 1000 (3'3") 1140 (3'9") 1065 (3'6") 1065 (3'6")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-14
Blade Specifications BULLDOZERS
Semi-U-tiltdozer
Model
D375A-5*** D375A-5E0*** D475A-5 D475A-5***
Item
OPERATING WEIGHT* kg (lb) 61590 (135,780) 63080 (139,070) 95280 (210,050) 95580 (210,720)
BLADE CAPACITY LH2** m3 (yd3) 24.0 (31.4) 24.0 (31.4) 38.1 (49.8) 38.1 (49.8)
SAE 18.5 (24.2) 18.5 (24.2) 27.2 (35.6) 27.2 (35.6)
DIMENSION*
A Overall length mm (ft.in) 7635 (25'1") 7635 (25'1") 8700 (28'7") 8700 (28'7")
B Overall width mm (ft.in) 4695 (15'5") 4695 (15'5") 5265 (17'5") 5265 (17'5")
C Overall height mm (ft.in) 4035 (13'3") 4265 (7'5") 4240 (13'11") 4240 (13'11")
Ground pressure kg/cm2 (PSI) 1.31 (18.63) 1.30 (18.49) 1.54 (21.90) 1.54 (21.90)
DOZER EQUIPMENT
Weight kg (lb) 11790 (25,990) 11290 (24,890) 16500 (36,380) 16800 (37,040)
(Includes hydraulic control unit)
Length mm (ft.in) 4695 (15'5") 4695 (15'5") 5265 (17'5") 5265 (17'5")
Height mm (ft.in) 2265 (7'5") 2265 (7'5") 2690 (8'10") 2690 (8'10")
D Max. lift above ground mm (ft.in) 1660 (5'5") 1660 (5'5") 1620 (5'4") 1620 (5'4")
E Max. drop below ground mm (ft.in) 715 (2'4") 715 (2'4") 1010 (3'4") 1010 (3'4")
F Max. tilting adjustment mm (ft.in) 1165 (3'10") 1150 (3'9") 770 (2'6") 1145 (3'9")
Model
D475A-5E0***
Item
OPERATING WEIGHT* kg (lb) 100540 (221,658)
DOZER EQUIPMENT
Weight kg (lb) 16950 (37,370)
(Includes hydraulic control unit)
Length mm (ft.in) 5265 (17'3")
Height mm (ft.in) 2690 (8'10")
D Max. lift above ground mm (ft.in) 1620 (5'4")
E Max. drop below ground mm (ft.in) 1010 (3'4")
F Max. tilting adjustment mm (ft.in) 1145 (3'9")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-15
Blade Specifications BULLDOZERS
Sigmadozer
F
E
B A
FVBH0387
Model
D155AX-6 D155AX-6*** D155AX-6*4 D155AX-6*5
Item
OPERATING WEIGHT* kg (lb) 35940 (79,240) 35940 (79,240) 36360 (80,160) 36360 (80,160)
BLADE CAPACITY LH2** m3 (yd3) 13.9 (18.17) 13.9 (18.17) 13.9 (18.17) 13.9 (18.17)
SAE 9.4 (12.3) 9.4 (12.3) 9.4 (12.3) 9.4 (12.3)
DIMENSION*
A Overall length mm (ft.in) 6125 (20'1") 6125 (20'1") 6125 (20'1") 6125 (20'1")
B Overall width mm (ft.in) 4060 (13'4") 4060 (13'4") 4060 (13'4") 4060 (13'4")
C Overall height mm (ft.in) 3385 (11'1") 3385 (11'1") 3385 (11'1") 3385 (11'1")
Ground pressure kg/cm2 (PSI) 0.98 (13.92) 0.98 (13.92) 0.99 (14.1) 0.99 (14.1)
DOZER EQUIPMENT
Weight kg (lb) 4940 (10,890) 4940 (10,890) 5360 (11,820) 5360 (11,820)
(Includes hydraulic control unit)
Length mm (ft.in) 4060 (13'4") 4060 (13'4") 4060 (13'4") 4060 (13'4")
Height mm (ft.in) 1850 (6'1") 1850 (6'1") 1850 (6'1") 1850 (6'1")
D Max. lift above ground mm (ft.in) 1320 (4'4") 1320 (4'4") 1320 (4'4") 1320 (4'4")
E Max. drop below ground mm (ft.in) 617 (2') 617 (2') 617 (2') 617 (2')
F Max. tilting adjustment mm (ft.in) 570 (1'10") 920 (3') 570 (1'10") 920 (3')
Digging angle degree 46 46 46 46
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
*4 : Strengthened type
*5 : Strengthened Dual tiltdozer
1B-16
Blade Specifications BULLDOZERS
U-tiltdozer
D
F G.L
E
B A
D275AX-5E0
Model D155A-5
D155AX-6 D155A-2A D275A-5
Item D155AX-5
D275AX-5
OPERATING WEIGHT* kg (lb) 33500 (73,850) 36630 (80,770) 44180 (97,400) 46110 (101,650)
35000 (77,160)
BLADE CAPACITY LH2** m3 (yd3) 13.2 (17.3) 13.5 (17.7) 13.5 (17.7) 18.0 (23.5)
SAE 11.8 (15.4) 11.9 (15.6) 11.9 (15.6) 16.6 (21.7)
DIMENSION*
A Overall length mm (ft.in) 6695 (22') 6590 (21'7") 6975 (22'11") 7265 (23'10")
B Overall width mm (ft.in) 4265 (14') 4225 (13'10") 4225 (13'10") 4615 (15'2")
C Overall height mm (ft.in) 3395 (11'2'') 3385 (11'1") 3725 (12'3") 3965 (13'0")
Ground pressure kg/cm2 (PSI) 0.93 (13.22) 1.00 (14.19) 1.00 (14.22) 1.10 (15.64)
0.97 (13.79) 1.09 (15.50)
DOZER EQUIPMENT
Weight kg (lb) 5600 (12,350) 5630 (12,420) 7400 (16,310) 8433 (18,590)
(Includes hydraulic control unit)
Length mm (ft.in) 4265 (14') 4225 (13'10") 4225 (13'10") 4615 (15'2")
Height mm (ft.in) 1760 (5'9'') 1790 (5'10") 1790 (5'10") 1973 (6'6")
D Max. lift above ground mm (ft.in) 1250 (4'1'') 1255 (4'1") 1560 (5'1") 1450 (4'9")
E Max. drop below ground mm (ft.in) 590 (1'11'') 593 (1'11") 560 (1'10") 640 (2'1")
F Max. tilting adjustment mm (ft.in) 1080 (3'7'') 970 (3'2") 1020 (3'4") 1070 (3'6")
D275AX-5E0***
Model
D275A-5*** D375A-5 D375A-5E0 D375A-5***
Item
D275AX-5***
OPERATING WEIGHT* kg (lb) 46200 (101,850) 61590 (135,780) 64210 (141,560) 61970 (136,620)
BLADE CAPACITY LH2** m3 (yd3) 18.0 (23.5) 26.3 (34.4) 26.3 (34.4) 26.3 (34.4)
SAE 16.6 (21.7) 22.0 (28.8) 22.0 (28.8) 22.0 (28.8)
DIMENSION*
A Overall length mm (ft.in) 7265 (23'10") 8000 (26'5") 8000 (26'3") 8000 (26'5")
B Overall width mm (ft.in) 4615 (15'2") 5140 (16'10") 5140 (16'10") 5140 (16'10")
C Overall height mm (ft.in) 3965 (13'0") 4035 (13'3") 4265 (7'5") 4035 (13'3")
Ground pressure kg/cm2 (PSI) 1.11 (15.78) 1.31 (18.63) 1.32 (18.77) 1.32 (18.77)
1.09 (15.50)
DOZER EQUIPMENT
Weight kg (lb) 8516 (18,770) 11790 (25,990) 12420 (27,380) 12170 (26,830)
(Includes hydraulic control unit)
Length mm (ft.in) 4615 (15'2") 5140 (16'10") 5140 (16'10") 5140 (16'10")
Height mm (ft.in) 1973 (6'6") 2265 (7'5") 2265 (7'5") 2265 (7'5")
D Max. lift above ground mm (ft.in) 1450 (4'9") 1660 (5'5") 1660 (5'5") 1660 (5'5")
E Max. drop below ground mm (ft.in) 640 (2'1") 715 (2'4") 715 (2'4") 715 (2'4")
F Max. tilting adjustment mm (ft.in) 1220 (4'0") 1165 (3'10") 1165 (3'10") 1260 (4'2")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-17
Blade Specifications BULLDOZERS
U-tiltdozer
D
F G.L
E
B A
Model
D375A-5E0*** D475A-5 D475A-5E0 D475A-5***
Item
OPERATING WEIGHT* kg (lb) 64590 (142,400) 97280 (214,460) 102390 (225,736) 97580 (215,120)
BLADE CAPACITY LH2** m3 (yd3) 26.3 (34.4) 42.3 (55.3) 42.27 (55.28) 42.3 (55.3)
SAE 22.0 (28.8) 34.4 (45.0) 34.4 (45.0) 34.4 (45.0)
DIMENSION*
A Overall length mm (ft.in) 8000 (26'3") 9200 (30'2") 9205 (30'2") 9200 (30'2")
B Overall width mm (ft.in) 5140 (16'10") 6205 (20'4") 6205 (20'4") 6205 (20'4")
C Overall height mm (ft.in) 4265 (7'5") 4240 (13'11") 4240 (13'11")
Ground pressure kg/cm2 (PSI) 1.33 (18.91) 1.57 (22.33) 1.59 (22.65) 1.57 (22.33)
DOZER EQUIPMENT
Weight kg (lb) 12800 (28,220) 18500 (40,790) 18800 (41,446) 18800 (41,450)
(Includes hydraulic control unit)
Length mm (ft.in) 5140 (16'10") 6205 (20'4") 6205 (20'4") 6205 (20'4")
Height mm (ft.in) 2265 (7'5") 2610 (8'7") 2610 (8'7") 2610 (8'7")
D Max. lift above ground mm (ft.in) 1660 (5'5") 1620 (5'4") 1620 (5'4") 1620 (5'4")
E Max. drop below ground mm (ft.in) 715 (2'4") 1010 (3'4") 1010 (3'4") 1010 (3'4")
F Max. tilting adjustment mm (ft.in) 1260 (4'2") 905 (3'0") 905 (3') 1350 (4'5")
Model
D475A-5E0***
Item
OPERATING WEIGHT* kg (lb) 102840 (226,730)
DOZER EQUIPMENT
Weight kg (lb) 19250 (42,440)
(Includes hydraulic control unit)
Length mm (ft.in) 6205 (20'4")
Height mm (ft.in) 2610 (8'7")
D Max. lift above ground mm (ft.in) 1620 (5'4")
E Max. drop below ground mm (ft.in) 1010 (3'4")
F Max. tilting adjustment mm (ft.in) 1350 (4'5")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-18
Blade Specifications BULLDOZERS
U-tiltdozer, Super dozer
U-tiltdozer
Model
D575A-3
Item
OPERATING WEIGHT* kg (lb) 121835
(268,600)
BLADE CAPACITY LH2** m3 (yd3) 46.7 (61.1)
SAE 45 (58.9)
DIMENSION*
A Overall length mm (ft.in) 9815 (21'8")
B Overall width mm (ft.in) 6800 (22'4")
C Overall height mm (ft.in) 4495 (14'9")
Ground pressure kg/cm2 (PSI) 1.56 (22.18)
DOZER EQUIPMENT
Weight kg (lb) 23385 (51,550)
(Includes hydraulic control unit)
Length mm (ft.in) 6800 (22'4")
Height mm (ft.in) 2600 (8'6")
D Max. lift above ground mm (ft.in) 1850 (6'1")
E Max. drop below ground mm (ft.in) 900 (2'11")
F Max. tilting adjustment mm (ft.in) 1600 (5'3")
* : Including dozer equipment in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
C
D
F G.L
E
B A
FVBH0333
Super Dozer
Model
D475A-5 SD D475ASD-5E0 D575A-3 SD
Item
OPERATING WEIGHT* kg (lb) 106190 112260 152410
(234,110) (247,490) (336,000)
BLADE CAPACITY LH2** m3 (yd3) 69.0 (90.3)
SAE 45.0 (58.9) 45.0 (58.9) 60.0 (78.5)
DIMENSION*
A Overall length mm (ft.in) 10525 (34'6") 10525 (34'6") 11720 (38'5")
B Overall width mm (ft.in) 6465 (21'3") 6465 (21'3") 7400 (24'3")
C Overall height mm (ft.in) 4240 (13'11") 4546 (14'11") 4495 (14'9")
Ground pressure kg/cm2 (PSI) 1.53 (21.8) 1.53 (21.8) 1.50 (21.33)
DOZER EQUIPMENT
Weight kg (lb) 21200 (46,740) 21350 (47,070) 32430 (71,500)
(Includes hydraulic control unit)
Length mm (ft.in) 6465 (21'3") 6465 (21'3") 7400 (24'3")
Height mm (ft.in) 3220 (10'7") 2690 (8'10") 3250 (10'8")
D Max. lift above ground mm (ft.in) 1960 (6'5") 1960 (6'5") 1750 (5'9")
E Max. drop below ground mm (ft.in) 860 (2'10") 860 (2'10") 805 (2'8")
F Max. tilting adjustment mm (ft.in) 900 (2'11") 900 (2'11") 1000 (3'3")
COUNTERWEIGHT kg (lb) 6400 (14,110) 6400 (14,110) 5400 (11,900)
* : Including dozer equipment and counterweight in addition to bare tractor, excluding ROPS and cab.
** : L: Blade length H: Blade height
*** : Dual tiltdozer
1B-19
Blade Specifications BULLDOZERS
Coal dozer
F E
B A
FVBH0200
Model
D155AX-5 D155A-5 D155A-2A
Item
OPERATING WEIGHT* kg (lb) 34830 (76,790) 33330 (73,480) 34250 (75,510)
BLADE CAPACITY LH2** m3 (yd3) 21.5 (28.1) 21.5 (28.1) 17.2 (22.5)
SAE
DIMENSION*
A Overall length mm (ft.in) 6900 (22'8") 6900 (22'8") 7020 (23')
B Overall width mm (ft.in) 5300 (17'5") 5300 (17'5") 5300 (17'5")
C Overall height mm (ft.in) 3395 (11'2") 3395 (11'2") 3725 (12'3")
Ground pressure kg/cm2 (PSI) 0.76 (10.8)*** 0.73 (10.5)*** 0.97 (13.79)
DOZER EQUIPMENT
Type Coal dozer with Coal dozer with Coal dozer with
power tilt power tilt power tilt
Weight kg (lb) 4930 (10,870) 4930 (10,870) 6380 (14,070)
(Includes hydraulic control unit)
Length mm (ft.in) 5300 (17'5") 5300 (17'5") 5300 (17'5")
Height mm (ft.in) 2125 (7'0") 2125 (7'0") 1800 (5'11")
D Max. lift above ground mm (ft.in) 1495 (4'11") 1495 (4'11") 1620 (5'4")
E Max. drop below ground mm (ft.in) 565 (1'0") 565 (1'10") 545 (1'9")
F Max. tilting adjustment mm (ft.in) 1270 (4'2") 1270 (4'2") 1270 (4'2")
1B-20
Production BULLDOZERS
The estimated production curves give maximum production before correction and are based on the following
conditions.
1. 100% efficiency
2. 0.05 min time fixed (for gear shifting)
3. Machine cuts for 15 m (50 ft), then drifts blade load.
4. Gear
JOB EFFICIENCY
• Good 0.83 (50 min out of an hour machine use)
• Average 0.75 (45 min out of an hour machine use)
• Rather poor 0.67 (40 min out of an hour machine use)
• Poor 0.58 (35 min out of an hour machine use)
1B-21
Production BULLDOZERS
Lyd3/h Lm3/h
3600 2800
D475A D575A
3400 2600
D375A
3200
2400
3000
2800 2200
2600 2000
D275A/AX
2400
1800
HOURLY PRODUCTION
2200
1600
2000
1800 1400
1600 1200
1400 D155AX-5
1000
1200 D155A-5
1000 800
D155A-2
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0181
Lyd3/h Lm3/h
3600 2800
D475A D575A
3400 2600
3200
2400 D375A
3000
2800 2200
2600 2000
D275A/AX
2400
1800
HOURLY PRODUCTION
2200
1600
2000
1800 1400
1600 1200 D155A-2A
1400 D155AX-5
1000
1200 D155A-5
1000 800
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0182
1B-22
Production BULLDOZERS
4400 3400
4200 3200
4000
3000
3800
3600 2800
3400 2600
3200
2400
HOURLY PRODUCTION
3000
2800 2200
2600 2000
2400
1800
2200
1600
2000
1800 1400
1600 1200
1400
1000
1200
1000 800
800 600
600
400
400
200
200
0 0
0 15 30 45 60 75 90 105 120 135 150 165 180 195 m
0 100 200 300 400 500 600 ft
AVERAGE DOZING DISTANCE
FVBH0183
1B-23
MEMO
SECTION 1C
RIPPERS
CONTENTS
Features .................................................................... 1C-2
Specification:
Multi-shank ripper (rigid type) ............................ 1C-3
Multi-shank ripper (variable type) ...................... 1C-5
Giant ripper (variable type) ................................. 1C-6
Ripper selection ....................................................... 1C-8
Ripper point selection ............................................. 1C-9
Production .............................................................. 1C-12
1C-1
Features RIPPERS
Outstanding productivity
1. Superior ripping performance is achieved through a large operating weight, high engine output and a
conventional drive undercarriage.
2. Large maximum penetration depth provides high ripper production.
3. The unique linkage design enables the ripper point to draw an ideal locus during cylinder tilting for
effective excavation of embedded rocks.
In the KOMATSU linkage, the lift cylinder is mounted on the beam, causing the point to make an
ideal movement when the tilt cylinder is actuated.
Thus, the range of digging angles practically available is wider than the conventional type range,
giving excellent digging force.
Tilt cylinder
Lift cylinder
Beam
Arm
FVBH0302 FVBH0305
• This patented mechanism lets the point make an ideal • After penetrating the ground, the point makes longer
movement when the tilt cylinder is in action, which in turn downward movements, resulting in a narrow digging
gives rise to a large digging force over the entire digging angle range in which materials can be lifted or rolled out.
angle range.
Lifting
Distance Lifting
Range capable Distance Range capable
of lifting out of lifting out
material material
Rolling range FVBH0303 Rolling range FVBH0306
(Relationship between the digging angle and the digging force when the tilt cylinder is in action)
Lifting-out force(f)
Lifting-out force(f)
20 O 20
10 10
0 0
37.5 50 66 35 45 63
Penetration angle(degree) FVBH0304 Penetration angle(degree) FVBH0307
Minimum downtime
1. Large sectional area of the beam extends service life.
2. The forged ripper points are sharpened for excellent penetration and long service life.
Easy operation
1. Optional pin puller facilitates change in digging depth.
The optional pin puller mechanism functions to insert or remove the pin from its hole. This is
accomplished with a hydraulic cylinder and can be accomplished by an experienced operator, from within
the cab. This feature thus provides a time savings benefit.
Shank
Aligning
marks
Holder
1C-2
Specifications RIPPERS
Multi-shank Ripper (Rigid type)
B
A
B
D
G.L
E C
F
Model
D31EX-21 D37EX-21 D39EX-21 D41E-6
Item
RIPPER EQUIPMENT:
Type Tool bar Tool bar Tool bar Parallelogram
Weight** kg (lb) 575 (1,270) 575 (1,270) 575 (1,270) 810 (1,790)
A Beam length mm (ft.in) 1530 (5'0") 1530 (5'0") 1530 (5'0") 1555 (5'1")
Shanks:
No. of shanks 5 5 5 3
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 700 (2'4") 700 (2'4") 700 (2'4") 700 (2'4")
Pitch (2 shank) mm (ft.in) 1400 (4'7")
Digging angle degree Fixed Fixed 55°
Fixed
D65E-12
Model D85EX-15
D61EX-15 D65EX-15 D85ESS-2A
Item D85EX-15E0
D65EX-15E0
RIPPER EQUIPMENT:
Type Parallelogram Parallelogram Parallelogram Parallelogram
Weight** kg (lb) 1645 (3,630) 1680 (3,700) 1680 (3,700) 2500 (5,520)
A Beam length mm (ft.in) 2170 (7'1") 2170 (7'1") 2170 (7'1") 2227 (7'4")
Shanks:
No. of shanks 3 3 3 3
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 950 (3'1") 950 (3'1") 950 (3'1") 1000 (3'3")
Pitch (2 shank) mm (ft.in) 1900 (6'3") 1900 (6'3") 1900 (6'3") 2000 (6'7")
Digging angle degree 55° , 45° 55° , 45° 2-stage 54.5°
2-stage 2-stage adjustable
adjustable adjustable
Digging depth 3-stage 3-stage 3-stage 2-stage
adjustable adjustable adjustable adjustable
C Max. digging depth mm (ft.in) 665 (2'2") 595 (1'11") 595 (1'11") 655 (2'2")
D Max. lift above ground mm (ft.in) 565 (1'10") 640 (2'1") 640 (2'1") 565 (1'10")
E Ripper point reach mm (ft.in) 1295 (4'3") 1300 (4'3") 1295 (4'3") 1480 (4'10")
F Tail length mm (ft.in) 1795 (5'11") 1790 (5'10") 2075 (6'10")
HYDRAULIC CONTROL UNIT* kg (lb) 35 (80) 70 (150) 70 (150)
1C-3
Specifications RIPPERS
Multi-shank Ripper (Rigid type)
B
A
B
D
G.L
E C
F
Model
D155A-2A
Item
RIPPER EQUIPMENT:
Type Parallelogram
Weight** kg (lb) 4870 (10,740)
A Beam length mm (ft.in) 2420 (7'11")
Shanks:
No. of shanks 3
Tooth point Reversible
B Pitch (3 shank) mm (ft.in) 1120 (3'8")
Pitch (2 shank) mm (ft.in) 2240 (7'4")
Digging angle degree 45°
1C-4
Specifications RIPPERS
Multi-shank Ripper (Variable type)
B
A
B
D
G.L
E C
F
D275A-5
Model D155A-5
D155AX-6 D155A-2A D275AX-5
Item D155AX-5
D275A-5E0
RIPPER EQUIPMENT:
Type Variable Variable Variable Variable
digging angle digging angle digging angle digging angle
type type type type
Weight** kg (lb) 3710 (8,180) 3760 (8,290) 5390 (11,880) 4462 (9,840)
A Beam length mm (ft.in) 2260 (7'5") 2320 (7' 7") 2420 (7'11") 2495 (8'2")
Shanks:
No. of shanks 3 3 3 3
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 1040 (3'5") 1070 (3'6") 1120 (3'8") 1130 (3'8")
Pitch (2 shank) mm (ft.in) 2080 (6'10") 2140 (7'0") 2240 (7'4") 2260 (7'5")
Digging angle degree Std:49° Std:49° Std:45° Std:51.7°
Stepless Stepless Stepless Stepless
adjustable adjustable adjustable adjustable
Model
D375A-5 D375A-5E0 D475A-5 D475A-5E0
Item
RIPPER EQUIPMENT:
Type Variable Variable Variable Variable
digging angle digging angle digging angle digging angle
type type type type
Weight** kg (lb) 6720 (14,810) 6720 (14,810) 9720 (21,430) 9720 (21,430)
A Beam length mm (ft.in) 2854 (9'4") 2854 (9'4") 3085 (10'1") 3085 (10' 1")
Shanks:
No. of shanks 3 3 3 3
Tooth point Replaceable Replaceable Replaceable Replaceable
B Pitch (3 shank) mm (ft.in) 1320 (4'4") 1320 (4'4") 1385 (4'7") 1385 (4'7")
Pitch (2 shank) mm (ft.in) 2640 (8'8") 2640 (8'8") 2770 (9'1") 2770 (9'1")
Digging angle degree Std:45° Std:45° Std:45° Std:45°
Stepless Stepless Stepless Stepless
adjustable adjustable adjustable adjustable
1C-5
Specifications RIPPERS
Giant Ripper (Variable type)
B
G.L
C
A
Model D155A-5
D155AX-6 D155A-2A D275A-5
Item D155AX-5
RIPPER EQUIPMENT:
Type Variable Variable Variable Variable
digging angle digging angle digging angle digging angle
type type type type
Weight** kg (lb) 2760 (6,080) 2440 (5380) 4830 (10,650) 4600 (10,140)
Shanks:
No. of shanks 1 1 1 1
Tooth point Reversible Reversible Replaceable Replaceable
Digging angle degree Std:49° Std:49° Std:45°
Stepless Stepless Stepless Stepless
adjustable adjustable adjustable adjustable
Model D275AX-5
D375A-5 D375A-5E0 D475A-5
Item D275AX-5E0
RIPPER EQUIPMENT:
Type Variable Variable Variable Variable
digging angle digging angle digging angle digging angle
type type type type
Weight** kg (lb) 3600 (7,940) 5470 (12,060) 5470 (12,060) 7300 (16,090)
Shanks:
No. of shanks 1 1 1 1
Tooth point Replaceable Replaceable Replaceable Replaceable
Digging angle degree Std:42.7° Std:45° Std:45° Std:45°
Stepless Stepless Stepless Stepless
adjustable adjustable adjustable adjustable
1C-6
Specifications RIPPERS
Giant Ripper (Variable type)
B
G.L
C
A
Model
D475A-5E0 D575A-3
Item
RIPPER EQUIPMENT:
Type Variable Variable
digging angle digging angle
type type
Weight** kg (lb) 7360 (16,230) 10530 (23,210)
Shanks:
No. of shanks 1 1
Tooth point Replaceable Replaceable
Digging angle degree Std:45° Std:45°
Stepless Stepless
adjustable adjustable
1C-7
Ripper Selection RIPPERS
L: Giant
: Multi-Shank Push plate
L FVBH0310 FVBH0311
M-3 Adaptable to hard or soft rock by increasing or G-3 Deep penetration and large distance from shank
decreasing the number of shanks. to rear of bulldozer make it possible to handle large
rocks.
G-4 Pin puller simplifies changing shank length.
1C-8
Ripper Point Selection RIPPERS
Various types of ripper points are available, and the general standards for selection according to the
type of use are given below.
When combining of these categories, 4~7 types of points are available for each model.
If the point does not dig into the rock, but slips on the rock surface, the friction heat between the point and
rock causes an extreme rise in temperature of the point, thus reducing point hardness.
There is a close relationship between hardness and wear: The higher the hardness, the less the wear.
Also there is a close relationship between
increased temperature of the point and excellent Red
wear of the point (abnormal wear). Hardness and wear life
Hardness
Yellow
retains its hardness better than the yellow point
Wear life
Has a wear life 1.5 ~ 2.0 times greater than the short point, but its strength is inferior to
Long
the short point because of its extra length.
Compared with the long point, it has superior strength, but has inferior wear life compare to
Short
the long point.
This has a self-sharpening shape, so it always retains its cutting edge, and provides a
long life on jobsites where there is soft rock and penetration ability is not required.
The rib provided only on the top surface wears gradually under the flow of the soil, and there
is no change in the penetration surface pressure.
Penetration surface pressure
10 Symmentric type
Symmentric type
Non symmentric type
10
Turn
Symmetric type
(can be turned) Necessary surface
5 pressure (hard rock)
0
Distance from tip (L) mm
1C-9
Ripper Point Selection RIPPERS
The table below gives a summary of the features of each type of point.
Strength,
Seismic Wear Abnormal
Length Color Shape resistance to Penetration Cost
velocity tolerance wear
impact
Symmetric
type
Yellow 4
Non
symmetric
type No
Short particular
Symmetric limit
type
Red 2
Non
symmetric
type
Non
Yellow symmetric (As a 3
type guideline)
Long
Non Max.
Red symmetric 1500m/sec 1
type
Key : Good, : Average, : Poor
Cost: 1 (Most expensive), 4 (Least expensive)
1C-10
Ripper Point Selection RIPPERS
Step 1 Selection
Yes
Install standard point B Step 3 A
(Check for
Step 2 crack or
(Check wear) breakge)
B
Yes
Yes
Yes
(Over 70%) No
Does rock have Does impact
high quartz Install standard point B force causes C
contents? breakage?
*1[Whole point is worn evenly]
Excessive generation No
of heat at point (Less than 70%)
[Only tip of point is worn]
Does impact No
Install point D force causes D
breakage?
Yes
E
D155AX-5
D275AX-5
D85EX-15
D155A-5
D155A-2
D275A-5
D375A-5
D475A-5
Selection Type of
Hardness Features Shape
rock
1C-11
Production RIPPERS
Not all material can be ripped. Whether or not a rock Characteristics which determine the ease of
can be ripped can be determined by any of the rippability are summarized below.
following methods:
1) By the type of rock • Favorable rock for ripping
2) By an indoor rock test
Stratified
3) By a field rock test Weathered
4) By a digging test with the ripper in the field. Brittle, crystalline nature
High degree of laminations or thin layers.
Method 4) is most effective. If the user has no Fractured
experience in ripping, an actual ripping operation Faults or planes of weakness.
should be demonstrated for the user by an operator
experienced in ripping. Methods 1) and 3) are • Unfavorable rock for ripping
described below :
Fine-grained with a solid cementing agent.
Determination of rippability by type Moisture, which tends to solidify the rock surface layer.
of rock
Lacking planes of weakness
Massive and homogeneous
Rocks are classified into sedimentary (aqueous), Non-crystalline and not brittle
igneous, and metamorphic. The following general
rules apply:
Determination of rippability by in-
1) Sedimentary rocks such as sandstone, limestone, the-field rock test.
and shale can be ripped easily. Sedimentary
rocks are usually found stratified in layers which Seismic wave velocity tests are used to estimate the
vary in thickness. The thinner the layers, the rippability of rock. In this test, an artificial earthquake
easier it is to rip them. is introduced and the travel speeds of seismic waves
through different kinds of sub-surface materials are
2) Igneous rocks such as granite, basalt, and
measured. Thus the degree of consolidation,
andesite are not found in distinct layers or
thickness of sub-surface layers, hardness, degree of
cleavage planes, and this makes them difficult to
rip. fracturing, stratification, and weathering can be
determined .
3) Metamorphic rocks such as gneiss, schist, and
quartzite vary in rippability according to the
degree of stratification or cleavage. The chart below compares ripper performance to
seismic velocities. It should be used ONLY A
Rippability depends not only on the type of rock, but
also on the degree of weathering or fracturing. ROUGH GUIDE, because ripper performance is
subject to many other conditions.
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
1C-12
Production RIPPERS
The chart below compares ripper performance to seismic velocities. It should be used ONLY A ROUGH
GUIDE, because ripper performance is subject to many other conditions.
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0260
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0261
1C-13
Production RIPPERS
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0262
SEDIMENTARY ROCKS
SHALE
SANDSTONE
SILTSTONE
CLAYSTONE
CONGLOMERATE
BRECCIA
CALICHE
LIMESTONE
METAMORPHIC ROCKS
SCHIST
SLATE
Seismic velocity 0 500 1000 1500 2000 2500 3000 3500 (m/s)
0 2 4 6 8 10 12 (X 1000ft/s)
FVBH0263
1C-14
Production RIPPERS
HOURLY PRODUCTION
(Standard production) × (Job efficiency) 2000
D275A
1400
Operation conditions E
0.75 1000 D155AX
Good
(45 min out of an hour use) 1200
0.58
Average 800
(35 min out of an hour use)
0.50 D155A
Rather poor
(30 min out of an hour use) 800 600
0.40
Poor
(25 min out of an hour use)
400
400
200
0
500 1000 1500 2000 2500 3000 4000 (m/s)
2000 4000 6000 8000 10000 (ft/s)
SEISMIC WAVE VELOCITY
FVBH0184
Conditions
1) Ripping production only
2) Bulldozers with single shank rippers
3) 100% job efficiency
1C-15
MEMO
SECTION 1D
TOWING WINCHES
CONTENTS
Specifications ........................................................... 1D-2
1D-1
Specifications TOWING WINCHES
A
B
C
FVBH0201
Model D65EX/PX-15
D68ESS-12 D85ESS-2
Item D65EX/PX-15E0
Type Wet type Wet type Wet type
Weight kg (lb) 1290 (2,840) 1570 (3,455) 1290 (2,840)
DIMENSION
A: Ground to drum center mm (ft.in) 1201 (3'11") 1145 (3'9") 1201 (3'11")
B: Ground to hitch center mm (ft.in) 650 (2'2") 610 (2') 650 (2'2")
C: Sprocket center to drum center mm (ft.in) 907 (3'0") 945 (3'1") 1066 (3'6")
Drum dimension:
Length mm (ft.in) 1005 (3'4") 975 (3'2") 1005 (3'4")
Width mm (ft.in) 1070 (3'6") 996 (3'3") 1070 (3'6")
Height mm (ft.in) 980 (3'3") 980 (3'3") 980 (3'3")
Drum diameter mm (ft.in) 254 (10") 254 (10") 254 (10")
Flange diameter mm (ft.in) 510 (1'8") 510 (1'8") 510 (1'8")
Drum width mm (ft.in) 320 (1'1") 320 (1'1") 320(1'1")
Cable:
Cable dia. × length mm × m 26 × 73 28.6 x 50 26 × 73
(in × ft) (1.02 × 240) (1.12 x 165) (1.02 × 240)
Performance:
Line speed:
Bare drum m/min. F28 (92) F28 (92) F28 (92)
(FPM) R59 (194) R63 (207) R63 (207)
Full drum m/min. F48 (157) F48 (157) F48 (157)
(FPM) R102 (335) R110 (361) R110 (361)
Line pull:
Bare drum kg (lb) 31400 (69,220) 26910 (59,322) 31400 (69,220)
1D-2
SECTION 1E
PIPELAYERS
CONTENTS
Features .................................................................... 1E-2
Specifications ........................................................... 1E-3
Lifting capacity ......................................................... 1E-4
1E-1
Features PIPELAYERS
Safe operation
• Komatsu pipelayers offer safety features to keep
operators working confidently.
• All machines are standardly equipped with an
automatic boom maximum stopper device.
• There is a free-fall setting on the hook control
lever for use during an emergency.
• Komatsu pipelayers have a closed-type winch
brake that prevents slips during operation in wet
weather.
• Because the hook wires are located away from
the operator, danger in the event of a wire cut is
minimized.
1E-2
Specifications PIPELAYERS
Model
D85C-21 D155C-1 D355C-3
Item
OPERATING WEIGHT kg (lb) 30050 (66,250) 45800 (100,970) 57850 (127,540)
MAX. LlIFTING CAPACITY kg (lb/kN) 41000 70000 92000
(90,390/402) (154,320/686) (202,820/902)
HORSEPOWER kW (HP)/RPM 168 (225)/2000 239 (320) /2000 269 (360)/2000
DIMENSIONS:
Overall length mm (ft.in) 4805 (15'9") 5840 (19'2") 6030 (19'9")
Overall width* mm (ft.in) 3490 (11'5") 3760 (12'4") 4405 (14'5")
Overall height mm (ft.in) 3640 (11'11") 3845 (12'7") 3925 (12'11")
Track gauge mm (ft.in) 2250 (7'5") 2380 (7'10") 2550 (8'4")
Length of track on ground mm (ft.in) 2730 (8'11") 3620 (11'11") 3750 (12'4")
Ground contact area 2
cm (sq.in) 33300 (5,160) 51400 (7,967) 64500 (10,000)
Ground pressure kg/cm2(PSI/kPa) 0.90 (12.8/88.3) 0.89 (12.66/87.3) 0.90 (12.8/88.3)
PIPELAYING EQUIPMENT:
Hook speeds:(bare drum) m/min (FPM)
Raise 1st 9.6 (31.5) 6.0 (19.7) 5.5 (18.0)
2nd 21.7 (71.2) 13.8 (45.3) 12.7 (41.7)
Lower 1st 9.3 (30.5) 4.8 (15.7) 4.5 (14.8)
2nd 21.1 (69.2) 11.1 (36.4) 10.2 (33.5)
Boom: Length mm (ft.in) 5500 (18'1") 6200 (20'4") 7300 (23'11")
Winch: Type H.C** H.C** H.C**
ENGINE: KOMATSU KOMATSU KOMATSU
Model S6D125 SA6D140 SA6D140
No.of cylinders- mm 6-125 × 150 6-140 × 165 6-140 × 165
bore × stroke (in) (4.92 × 5.91) (5.51 × 6.50) (5.51 × 6.50)
Piston displacement Itr (cu.in) 11.04 (674) 15.24 (930) 15.24 (930)
PERFORMANCE:
Travel speeds km/h (MPH)
Forward/Reverse 1st 3.5 (2.2)/4.7 (2.9) 3.6 (2.2)/4.4 (2.7) 3.3 (2.1)/3.9 (2.4)
2nd 6.5 (4.0)/8.3 (5.2) 6.6 (4.1)/7.8 (4.8) 5.9 (3.7)/7.0 (4.3)
3rd 10.7(6.6)/13.3(8.3) 11.2(7.0)/12.4(7.7) 9.8(6.1)/11.0(6.8)
UNDERCARRIAGE:
No. of rollers (Carrier/track) 2/6 2/8 2/8
Shoe width
Standard mm (in) 610 (24.0) 710 (28.0") 860 (34.0)
Optional mm (in) 660 (26.0) 760 (30.0") 960 (38.0)
710 (28.0) 1010 (40.0)
* : Counterweight retracted, excluding boom
** : Hydraulically-controlled double-drum, reversible
D155C-1
3765 (12'4")
2070 (6'9")
1800
6780 (22'3")
(5'11")
3845 (12'7")
3770 (12'4")
3020 (9'11")
2845 (9'4")
G.L
(1'6")
460
3090 (10'2")
1E-3
Lifting Capacity PIPELAYERS
D85C-21
Hook height
LIFTING CAPACITY
7.3 m Boom
HOOK HEIGHT
Working radius
6.2 m Boom
5.5 m Boom MAX LIFT CAPACITY PER SAE J743b
MAX LOAD CAPACITY PER ANSI B30.14
7.3 m boom hook hight
6.2 m boom hook hight
5.5 m boom hook hight
warking radius
(ANSI B30.14)
FVBH0026
BOOM OVERHANG
D155C-1
Boom overhang
HOOK HEIGHT
10
85 0%
%
6.2 m boom
warking radius
BOOM OVERHANG
FVBH0046
D355C-3
3
Boom overhang
HOOK HEIGHT
85 1
% 00%
7.3 m boom
warking radius
BOOM OVERHANG
FVBH0047
1E-4
SECTION 1F
TRIMMING DOZERS
CONTENTS
Trimming operation in vessel ..................................1F-2
Design features .........................................................1F-3
Standard equipment .................................................1F-5
Track shoe selection .................................................1F-6
Specifications ............................................................1F-7
1F-1
Trimming Operation TRIMMING DOZERS
in Vessel
Unloading clamshell buckets and pneumatic unloader have been conventionally used to unload bulk cargoes
(grain, salt, sugar, coal, ore fertilizer, chips, etc.) from vessels.
However, the bucket scooping amount of unloading materials or suction decreases when the unloading work
progresses, resulting in a corresponding deterioration of unloading efficiency.
This reduced efficiency means that vessels must remain longer in port, leading to a direct lowering of vessel
operating efficiency and a substantial increase in port charges. Consequently, it has become necessary to
find an effective method to facilitate bulk unloading. The conventional method is bulk cargoes were raked
manually has been replaced by the bulldozer, and a trimming dozer has now been developed specifically for
the handling of bulk cargoes in vessels.
Wheel loaders have often been employed at the final stages of unloading to protect the bottom of the vessel
hold, however these have been replaced quite recently by trimming dozers equipped with rubber crawler.
1F-2
Design Features TRIMMING DOZERS
3
4
d c 2
2
5
1F-3
Design Features TRIMMING DOZERS
The trimming dozers destined for in-vessel cargo work are selected so as that other cargo handling
unloaders and derricks may function with good efficiency.
When selection is made on the models of trimming dozer, the structure of holds (hatch size, existence of twin
deck, frame conditions, etc.), capacity of unloader (lifting capacity and cargo volume),and cargo material to
be handled must be taken into consideration.
1F-4
Standard Equipment TRIMMING DOZERS
Standard Equipment
D31E•P-20 D41A-3 D53A-17 D65E•EX-12
Air cleaner inner element, no-woven cloth made
Air cleaner inner element, urethane made
Alternator, corrosion proof type
Backup buzzer
Backup lamp, red color
Electric terminals, silicon compound coated
Engine side covers, perforated
Engine under guard, hinged type
Exhaust pipe, short
Fan, high speed
Front lights, additional
Fuel tank, large capacity
Hydraulic cylinder rod, thick chrome plated
Intake manifold, cast iron made
Oil pan, dual-bottom
Oil pan, stainless steel made
Radiator core protective grid
Radiator mask, hinged type
Radiator, corrosion proof type
Rear protector
Recoil spring, sealed type
Shoe, holed single grouser
Shoe, holed triple grouser
Starting motor, corrosion proof type
Tachometer with mechanical drive service meter
Track adjusting cylinders, thick chrome plated
Transmission oil cooler, tiltable
Wear resistant pulley
D65EX-15 D85EX-15
D85A-21 D65EX-15E0 D85EX-15E0
Air cleaner inner element, non-woven cloth made
Air cleaner inner element, urethane made
Air cleaner inner element, non-woven fabric made
Alternator, corrosion proof type
Backup buzzer
Backup lamp, red color
Cab
Electric terminals, silicon compound coated
Engine side covers, perforated
Engine under guard, hinged type
Exhaust pipe, elbow type
Exhaust pipe, short
Exhaust pipe, straight type
Fan, high speed
Front lights, additional
Fuel tank, large capacity
Hydraulic cylinder rod, thick chrome plated
Intake manifold, cast iron made
Oil pan, dual-bottom
Oil pan, stainless steel made
Radiator core protective grid
Radiator mask, hinged type
Radiator, corrosion proof type
Rear protector
Recoil spring, sealed type
Shoe, holed single grouser
Shoe, holed triple grouser
Starting motor, corrosion proof type
Tachometer with mechanical drive service meter
Track adjusting cylinders, thick chrome plated
Transmission oil cooler, tiltable
Under guard, hinged type
Wear resistant pulley
1F-5
Track Shoe Selection TRIMMING DOZERS
FVBH0241
SINGLE GROUSER SHOE HOLED SINGLE GROUSER SHOE HOLED TRIPLE GROUSER SHOE SWAMP SHOE
A B C D
0.5 kg/cm2
Salt (7.1 PSI) ( ) ( ) ( ) ( )
1F-6
Specifications TRIMMING DOZERS
I H
C
E
G.L
G D
F
B
Model
D31E-20 D31P-20 D41A-3 D53A-17
Item
OPERATING WEIGHT* kg (lb) 7000 (15,430) 7660 (16,890) 10540 (23,240) 13460 (29,670)
HORSEPOWER kW (HP)/RPM 52 (70)/2350 52 (70)/2350 68 (92)/2350 93 (124)/1900
PERFORMANCE:
Travel speed
Forward 1st 2.2 (1.4) 2.2 (1.4) 2.4 (1.5) 3.2 (2.0)
2nd 3.9 (2.4) 3.9 (2.4) 4.4 (2.7) 5.9 (3.7)
km/h (MPH)
3rd 6.5 (4.0) 6.5 (4.0) 7.6 (4.7) 9.8 (6.1)
Reverse 1st 2.4 (1.5) 2.4 (1.5) 3.0 (1.9) 3.9 (2.4)
2nd 4.3 (2.7) 4.3 (2.7) 5.5 (3.4) 7.1 (4.4)
3rd 7.1 (4.4) 7.1 (4.4) 9.4 (5.8) 11.9 (7.4)
DIMENSION*
A Overall length mm (ft.in) 4510 (14'10") 4690 (15'5") 5120 (16'10") 5510 (18'1")
B Overall width mm (ft.in) 2480 (8'2") 2780 (9'1") 2620 (8'7") 2890 (9'6")
C Overall height mm (ft.in) 1955 (6'5") 2045 (6'9") 2005 (6'7") 2365 (7'9")
D Length of track on ground mm (ft.in) 1880 (6'2") 2185 (7'2") 2060 (6'9") 2365 (7'9")
Ground pressure kg/cm2 (P.S.I) 0.47 (6.68) 0.29 (4.12) 0.64 (9.10) 0.62 (8.82)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 1380 (3,040) 1280 (2820) 1430 (3,150) 1800 (3,970)
Length mm (ft.in) 2480 (8'2") 2780 (9'1") 2620 (8'7") 2890 (9'6")
Height mm (ft.in) 750 (2'6") 750 (2'6") 850 (2'9") 930 (3'1")
Max. lift above ground mm (ft.in) 1480 (4'10") 1630 (5'4") 1435 (4'8") 1690 (5'7")
E Max. drop below ground mm (ft.in) 710 (2'4") 650 (2'2") 670 (9'6") 730 (2'5")
F Breast dimension mm (ft.in) 1200 (3'11") 1375 (4'6") 1540 (5'1") 1785 (5'10")
G Max. pitch adjustment
H Forward degree 38 37 38 50
I Reverse degree 24 26 25 25
Model
D65E-12 D65EX-12 D65EX-15 D65EX-15E0
Item
OPERATING WEIGHT* kg (lb) 19950 (43,980)** 20120 (44,360) 20680 (45,590) 21600 (47,620)
HORSEPOWER kW (HP)/RPM 135 (180)/1950 135 (180)/1950 142 (190)/1950 142 (190)/1950
PERFORMANCE:
Travel speed
Forward 1st 3.9 (2.4) 3.9 (2.4) 3.9 (2.4) 3.3 (2.1)
2nd km/h (MPH) 6.8 (4.2) 6.8 (4.2) 6.8 (4.2) 6.3 (3.9)
3rd 10.6 (6.6) 10.6 (6.6) 10.6 (6.6) 10.1 (6.3)
Reverse 1st 5.0 (3.1) 5.0 (3.1) 5.0 (3.1) 4.4 (2.8)
2nd 8.6 (5.3) 8.6 (5.3) 8.6 (5.3) 8.2 (5.1)
3rd 13.4 (8.3) 13.4 (8.3) 13.4 (8.3) 12.9 (8.1)
DIMENSION*
A Overall length mm (ft.in) 6475 (21'3") 6475 (21'3") 6475 (21'3") 6475 (21'3")
B Overall width mm (ft.in) 3210 (10'6") 3210 (10'6") 3210 (10'6") 3210 (10'6")
C Overall height mm (ft.in) 2990 (9'10")*** 2990 (9'10")*** 2990 (9'10") 2990 (9'10")
D Length of track on ground mm (ft.in) 2675 (8'9") 2675 (8'9") 2675 (8'9") 2675 (8'9")
Ground pressure kg/cm2 (P.S.I) 0.73 (10.38) 0.74 (10.52) 0.76 (10.8) 0.79 (11.2)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 4330 (9,550) 4330 (9,550) 4330 (9,550) 4330 (9,550)
Length mm (ft.in) 3210 (10'6") 3210 (10'6") 3210 (10'6") 3210 (10'6")
Height mm (ft.in) 1000 (3'3") 1000 (3'3") 1000 (3'3") 1000 (3'3")
Max. lift above ground mm (ft.in) 1610 (5'3") 1610 (5'3") 1610 (5'3") 1610 (5'3")
E Max. drop below ground mm (ft.in) 685 (2'3") 685 (2'3") 685 (2'3") 685 (2'3")
F Breast dimension mm (ft.in) 1610 (5'3") 1610 (5'3") 1490 (4'11") 1490 (4'11")
G Max. pitch adjustment
H Forward degree 29 29 29 29
I Reverse degree 22 22 22 22
* : Including dozer equipment in addition to bare tractor
** : Including cab and air conditioner
*** : To top of cab
1F-7
TRIMMING DOZERS
I H
C
E
G.L
G D
F
B
Model
D85A-21 D85EX-15 D85EX-15E0
Item
OPERATING WEIGHT* kg (lb) 24500 (54,010) 24850 (54,780) 25030 (55,180)
HORSEPOWER kW (HP)/RPM 168 (225)/2000 179 (240)/1900 179 (240)/1900
PERFORMANCE:
Travel speed
Forward 1st 3.5 (2.2) 3.6 (2.2) 3.3 (2.1)
2nd 6.5 (4.0) 6.1 (3.8) 6.1 (3.8)
km/h (MPH)
3rd 10.7 (6.6) 10.1 (6.3) 10.1 (6.3)
Reverse 1st 4.7 (2.9) 4.7 (2.9) 4.4 (2.7)
2nd 8.3 (5.2) 8.0 (5.0) 8.0 (5.0)
3rd 13.3 (8.3) 13.0 (8.1) 13.0 (8.1)
DIMENSION*
A Overall length mm (ft.in) 6420 (21'1") 6690 (21'11") 6690 (21'11")
B Overall width mm (ft.in) 3410 (11'2") 3410 (11'2") 3410 (11'2")
C Overall height mm (ft.in) 3090 (10'2") 3008 (9'10") 3008 (9'10")
D Length of track on ground mm (ft.in) 2730 (8'11") 3050 (10'0") 3050 (10'0")
Ground pressure kg/cm2 (P.S.I) 0.80 (11.38) 0.73 (10.4) 0.73 (10.4)
DOZER EQUIPMENT
Weight (includes hydraulic control unit) kg (lb) 4440 (9,790) 3810 (8,400) 3810 (8,400)
Length mm (ft.in) 3410 (11'2") 3410 (11'2") 3410 (11'2")
Height mm (ft.in) 1185 (3'11") 1185 (3'11") 1185 (3'11")
Max. lift above ground mm (ft.in) 1730 (5'8") 1730 (5'8") 1730 (5'8")
E Max. drop below ground mm (ft.in) 740 (2'5") 900 (2'11") 900 (2'11")
F Breast dimension mm (ft.in) 1580 (5'2") 1620 (5'4") 1620 (5'4")
G Max. pitch adjustment
H Forward degree 27 35 35
I Reverse degree 24 35 35
* : Including dozer equipment in addition to bare tractor
** : Including cab and air conditioner
*** : To top of cab
1F-8
CONTENTS
INDEX
SECTION 2
EXCAVATORS (BACKHOE) Sec 2A
MINIMAL SWING RADIUS Sec 2B
EXCAVATORS (UU)
LIFTING CAPACITY Sec 2C
ATTACHMENTS Sec 2D
HYDRAULIC LOADING SHOVELS Sec 2E
WHEEL-TYPE EXCAVATORS Sec 2F
DEMOLITION Sec 2G
SCRAP & MATERIAL HANDLING Sec 2H
SPECIAL APPLICATION MACHINES Sec 2J
SECTION 2A
EXCAVATORS (BACKHOE)
CONTENTS
Features .................................................................... 2A-2
Series Selection ..................................................... 2A-10
Specifications ......................................................... 2A-11
Dimensions ............................................................. 2A-30
Working Ranges and Digging Forces .................. 2A-43
Component Dimensions and Weights ................. 2A-53
Shoe Selection ....................................................... 2A-70
Shoe Application .................................................... 2A-71
Ground Pressure .................................................... 2A-74
Bucket Capacity Definition .................................... 2A-81
Bucket Selection .................................................... 2A-82
Bucket and Arm Combinations ............................ 2A-84
Teeth Features and Teeth Selection ..................... 2A-94
Teeth Selection ....................................................... 2A-95
Model Selection .................................................... 2A-100
Production ............................................................ 2A-109
2A-1
Features EXCAVATORS
(BACKHOE)
Ecology Features
ecot3 (EPA Tier 3, EU stage 3A certified
engine)
Komatsu develops and produces all major
components, such as engines, electronics and
hydraulic components in house.
With this “Komatsu Technology”, and adding
customer feedback, Komatsu is achieving great
advancements in technology.
To achieve high levels of productivity and ecology,
Komatsu developed the main components with an
advanced control system.
The result is a new generation of high performance
and environment friendly machines.
2A-2
Features EXCAVATORS
(BACKHOE)
2A-3
Features EXCAVATORS
(BACKHOE)
function operations.
4 5
Indicators
1 Auto-decelerator 5 Hydraulic oil temperature gauge
2 Working mode 6 Fuel gauge 1 2 3
Function
3 Travel speed 7 Eco-gauge Basic switches
4 5 6
operation
4 Engine water 8 Function switches menu switches
temperature gauge
Air conditioner
Basic operation switches operation
switches
1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Traveling selector 6 Windshield washer
Eco-gauge
Idling Caution
To prevent unnecessary fuel consumption, an idling
caution is displayed on the monitor, if the engine
idles for 5 minutes or more.
2A-4
Features EXCAVATORS
(BACKHOE)
Easy maintenance
• Hydraulic oil and filter/engine oil and
filter replacement interval extended
Oil and filter change interval
Model
Dash-7 Avance series
Item
450 (17.7")
Engine oil h 500 250
Engine oil filter h 500 250
Hydraulic oil h 5000 5000
Hydraulic oil filter h 1000 500
200 (7.9")
• Easy radiator cleaning
Clearance between radiator and oil cooler is
increased to facilitate radiator core cleaning with
an air nozzle.
• Remote mounted engine oil filter and fuel Conventional New hydraulic
drain valve for easy access hydraulic oil filter oil filter
• Water separator is standard equipment FZPM2775
2A-5
Features EXCAVATORS
(BACKHOE)
Personal
computer terminal
WebCARE Server (for downloading
data)
Komatsu
distributors
Recommendation
• An appropriate recommendation can be made by viewing these data over the Internet.
• Proper driving methods
• Formulation of maintenance plans in advance that suit the customer's production schedule.
Customer's Benefit
• Sudden break down can be prevented through utilization of data trend (change over time).
• Ascertaining the facts and searching for the cause of the breakdown are simplified, thus enabling
problems to be resolved quickly.
• Down time can be shortened by the systematic use of Reman components.
• Machine life can be extended significantly by proper operation and proper maintenance.
2A-6
Features EXCAVATORS
(BACKHOE)
2A-7
Features EXCAVATORS
(BACKHOE)
2A-8
Features EXCAVATORS
(BACKHOE)
Heavy-duty shovel undercarriage design
• Komatsu Mining Germany track system with oscillating shoes for optimum response to rugged mining
ground conditions
• Lifetime lubricated rollers
• Automatic track tensioning system
• Track shoes in high quality casting steel and engineered by finite element method
• Precision hard facing of contact surfaces for long term performance
• Different width of shoes available for best performance in softer mining ground conditions
Attachments
• Backhoe attachment available for all mining applications
• Closed box design combining steel plates and castings, engineered by finite element method for full
lifetime
• Wide selection of buckets and customized options
• Bucket wear package ranges to meet all mining conditions
• Attachment pin sealing arrangement for reduced bearing wear-parts costs
Service
• Hydraulically assisted ladder for ease and convenience access
• Upper structure walkway allows safe access to all service points
• Walk in machinery house provides all weather protection for service attention
• Automatic central lubrication system for attachment and main swing bearing
• Swing down service arm for fast, ground level refilling and evacuation and the minimizing of leakages
during service
• Complete machine delivered in pre-tested modules for fast erection on job side
2A-9
Features EXCAVATORS
(BACKHOE)
Series Selection
The AVANCE line-up is expanded, with different excavator series for different jobs.
You can choose the right machines for your work, factory-equipped for your operation.
• "Dash-7" Series, AVANCE "Standard" Series
Flexible, efficient excavators for a wider range of work
• AVANCE "HD" Series
"Heavy-duty" excavators with reinforced undercarriages for logging and scrap handling
• AVANCE "EXCEL and Custom" Series
Simple, basic excavators for easy operation and maintenance
• AVANCE "US" Series
Excavators with short tail swing profile for work on road ways,urban areas and logging road way
2A-10
Specifications EXCAVATORS
(BACKHOE)
Model
PC01-1 PC09-1 PC12R-8 PC14R-2
Item
Source Japan Japan Italy Italy
OPERATING WEIGHT* kg (lb) 380 (840) 890 (1,960) 1475 (3,250) 1460 (3,220)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 2.6 (3.5)/3000 6.2 (8.4)/2800 10.6 (14.3)/2450 11.2 (14.7))/2600
BUCKET CAPACITY RANGE 0.008 0.017 ~ 0.025 0.03 ~ 0.06 0.03 ~ 0.06
(SAE) m3 (cu.yd) (0.01) (0.022) (0.033) (0.04) (0.078) (0.04) (0.078)
PERFORMANCE:
Swing speed RPM 7.0 8.3 9 8.9
Max travel speed km/h (MPH) 1.4 (0.9) Hi 3.0 (1.9) 2 (1.2) 2 (1.2)
Lo 1.5 (0.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: HONDA KOMATSU KOMATSU KOMATSU
Model GX160KI 2D68E 3D68E 3D67E
No. of cylinders- mm 1-68 × 45 2-68 × 72 3-68 × 72 3-67 × 73.6
bore × stroke (in) (2.67 × 1.77) (2.68 × 2.83) (2.68 × 2.83) (2.64 × 2.90)
Piston displacement ltr. (cu.in) 0.163 (9.9) 0.522 (31.9) 0.784 (47.8) 0.778 (47.5)
HYDRAULIC SYSTEM:
Hydraulic pump Gear pumps Gear pumps Gear pumps Gear pumps
Max. oil flow ltr. (U.S.Gal)/min. 10 (2.6) 22 (5.8) 40.8 (10.8)
Max. oil pressure kg/cm2 (PSI) 150 (2130) 160 (2275) 194 (2760)
Track shoe width/ mm (in)/ 130 (5)/ 180 (7)/ 230 (9)/ 230 (9)/
ground pressure kg/cm2 (PSI) 0.17 (2.4) 0.28 (4.0) 0.27 (3.8)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 4.5 (1.2) 11 (2.9) 20 (5.3) 19 (5.0)
Hydraulic oil tank 4.8 (1.3) 12 (3.2) 23 (6.1) 12 (3.2)
MACHINE SPEC:
Boom mm (ft.in) 920 (3')
Arm mm (ft.in) 480 (1'7") 684 (2'3") 880 (2'11") 880 (2'11")
Bucket (SAE) m3 (cu.yd) 0.008 (0.01) 0.022 (0.029) 0.04 (0.05) 0.04 (0.05)
Upper attachment Canopy Canopy
Model
PC15R-8 PC15MR-2 PC16R-2 PC18MR-2
Item
Source Italy Japan Italy Japan
OPERATING WEIGHT* kg (lb) 1575 (3,470) 1805 (3,980) 1570 (3,460) 1780 (3,920)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 11.4 (15.3)/2600 11.2 (15.0)/2600 11.2 (14.7)/2600 11.2 (15.0)/2600
BUCKET CAPACITY RANGE 0.03 ~ 0.06 0.022 ~ 0.044 0.03 ~ 0.06 0.022 ~ 0.044
(SAE) m3 (cu.yd) (0.04) (0.078) (0.029) (0.058) (0.04) (0.078) (0.029) (0.058)
PERFORMANCE:
Swing speed RPM 10.4 8.3 8.9 8.9
Max travel speed km/h (MPH) Hi 4.2 (2.6) Hi 4.3 (2.7) Hi 4.2 (2.6) Hi 4.3 (2.7)
Lo 2.2 (1.4) Lo 2.3 (1.4) Lo 2.2 (1.4) Lo 2.3 (1.4)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D68E 3D68E 3D67E 3D67E
No. of cylinders- mm 3-68 × 72 3-68 × 72 3-67 × 73.6 3-67 × 73.6
bore × stroke (in) (2.68 × 2.83) (2.68 × 2.83) (2.64 × 2.90) (2.64 × 2.90)
Piston displacement ltr. (cu.in) 0.784 (47.8) 0.784 (47.8) 0.778 (47.5) 0.778 (47)
HYDRAULIC SYSTEM: 1 × Variable 1 × Variable 1 × Variable
Hydraulic pump Gear pumps Piston+Gear pump Piston Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 47.5 (12.6) 40.8 (10.8) 53.5 (14.1)
Max. oil pressure kg/cm2 (PSI) 220 (3130) 214 (3040) 235 (3340)
Track shoe width/ mm (in)/ 230 (9)/ 230 (9)/ 230 (9)/ 230 (9)/
ground pressure kg/cm2 (PSI) 0.29 (4.1) 0.30 (4.3) 0.31 (4.4)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 20 (5.3) 19 (5.0) 19 (5.0) 19 (5.0)
Hydraulic oil tank 23 (6.1) 14 (3.7) 12 (3.2) 15.2 (4.0)
MACHINE SPEC:
Boom mm (ft.in) 1760 (5'9'') 1760 (5'9'')
Arm mm (ft.in) 965 (3'2") 965 (3'2'') 965 (3'2") 965 (3'2'')
Bucket (SAE) m3 (cu.yd) 0.04 (0.05) 0.044 (0.058) 0.04 (0.05) 0.044 (0.058)
Upper attachment Canopy Canopy Canopy ROPS Canopy
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg (180lb) and, indicated implement, shoes and upper
attachment.
2A-11
Specifications EXCAVATORS
(BACKHOE)
Model
PC20MR-2 PC27MR-2 PC27MR-2 PC30MR-2
Item
Source Japan Japan Italy Japan
OPERATING WEIGHT* kg (lb) 2180 (4,810) 2990 (6,595) 3055 (6,735) 3180 (7,010)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 15.5 (21)/2500 19.0 (25.5)/2600 19.0 (25.5)/2600 20.6 (27.6)/2500
BUCKET CAPACITY RANGE 0.033 ~ 0.08 0.035 ~ 0.09 0.0345 ~ 0.105 0.035 ~ 0.11
(SAE) m3 (cu.yd) (0.043) (0.10) (0.046) (0.12) (0.059) (0.14) (0.045) (0.14)
PERFORMANCE:
Swing speed RPM 8.9 9.2 9.2 9.3
Max travel speed km/h (MPH) Hi 4.6 (2.9) Hi 4.6 (2.9) Hi 4.6 (2.9) Hi 4.6 (2.9)
Lo 2.8 (1.7) Lo 2.6 (1.6) Lo 2.6 (1.6) Lo 2.6 (1.6)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D76E 3D82AE 3D82AE 3D84E
No. of cylinders- mm 3-76 × 78 3-82 × 84 3-82 × 84 3-84 × 90
bore × stroke (in) (2.99 × 3.07) (3.23 × 3.31) (3.23 × 3.31) (3.31 × 3.54)
Piston displacement ltr. (cu.in) 1.115 (68.0) 1.33 (81.2) 1.33 (81.2) 1.496 (91.3)
HYDRAULIC SYSTEM: 1 × Variable 1 × Variable 1 × Variable 1 × Variable
Hydraulic pump Piston+Gear pump Piston+Gear pump Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 69.1 (18.2) 97 (25.6) 97 (25.6) 93.3 (24.6)
2
Max. oil pressure kg/cm (PSI) 250 (3555) 250 (3555) 250 (3555) 265 (3770)
Track shoe width/ mm (in)/ 250 (10)/ 300 (12)/ 300 (12)/ 300 (12)/
ground pressure kg/cm2 (PSI) 0.27 (3.8) 0.30 (4.3) 0.30 (4.3) 0.30 (4.3)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 28 (7.4) 44 (11.6) 44 (11.6) 44 (11.6)
Hydraulic oil tank 19 (5.0) 20 (5.3) 40 (10.6) 20 (5.3)
MACHINE SPEC:
Boom mm (ft.in) 1860 (6'1'') 2200 (7'3") 2200 (7'3") 2350 (7'9")
Arm mm (ft.in) 1015 (3'4'') 1110 (3'8") 1110 (3'8") 1260 (4'1")
Bucket (SAE) m3 (cu.yd) 0.066 (0.86) 0.08 (0.105) – 0.09 (0.12)
Upper attachment ROPS Canopy ROPS Canopy Cab ROPS Canopy
Model
PC30MR-2 PC35MR-2 PC35MR-2 PC40MR-2
Item
Source Italy Japan Italy Japan
OPERATING WEIGHT* kg (lb) 3165 (6,980) 3740 (8,245) 3755 (8,280) 4790 (10,560)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 20.6 (27.6)/2500 21.7 (29.1)/2400 21.7 (29)/2400 29.4 (39.4)/2500
BUCKET CAPACITY RANGE 0.035 ~ 0.13 0.055 ~ 0.13 0.035 ~ 0.13 0.055 ~ 0.16
(SAE) m3 (cu.yd) (0.045) (0.17) (0.07) (0.17) (0.045) (0.17) (0.07) (0.21)
PERFORMANCE:
Swing speed RPM 9.3 9 9 9
Max travel speed km/h (MPH) Hi 4.6 (2.9) Hi 4.6 (2.9) Hi 4.6 (2.9) Hi 4.6 (2.9)
Lo 2.6 (1.6) Lo 2.8 (1.7) Lo 2.8 (1.7) Lo 2.8 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 3D84E 3D88E 3D88E 4D88E
No. of cylinders- mm 3-84 × 90 3-88 × 90 3-88 × 90 4-88 × 90
bore × stroke (in) (3.31 × 3.54) (3.46 × 3.54) (3.46 × 3.54) (3.46 × 3.54)
Piston displacement ltr. (cu.in) 1.496 (91.3) 1.642 (100) 1.642 (100) 2.189 (134)
HYDRAULIC SYSTEM: 1 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston+Gear pump Piston+Gear pump Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 93.3 (24.6) 92 (24.3) 92 (24.3) 134 (35.4)
2
Max. oil pressure kg/cm (PSI) 265 (3770) 265 (3770) 265 (3770) 265 (3770)
Track shoe width/ mm (in)/ 300 (12)/ 300 (12)/ 300 (12)/ 400 (16)/
ground pressure kg/cm2 (PSI) 0.31 (4.4) 0.35 (5.0) 0.36 (5.1) 0.28 (4.0)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 44 (11.6) 44 (11.6) 44 (11.6) 65 (17.2)
Hydraulic oil tank 20 (5.3) 20 (5.3) 20 (5.3) 20 (5.3)
MACHINE SPEC:
Boom mm (ft.in) 2350 (7'9") 2560 (8'5") 2560 (8'5") 2740 (9'0")
Arm mm (ft.in) 1260 (4'1") 1350 (4'5") 1350 (4'5") 1440 (4'9")
Bucket (SAE) m3 (cu.yd) 0.095 (0.12) 0.11 (0.14) 0.12 (0.16) 0.14 (0.18)
Upper attachment Cab ROPS Canopy Cab ROPS Canopy
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
2A-12
Specifications EXCAVATORS
(BACKHOE)
Model
PC50MR-2 PC50MR-2 PC55MR-2
Item
Source Japan Italy China
OPERATING WEIGHT* kg (lb) 5040 (11,110) 4940 (10,890) 5420 (11,950)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 29.4 (39.4)/2350 29.4 (39.4)/2350 29.4 (39.4)/2350
BUCKET CAPACITY RANGE 0.055 ~ 0.16 0.07 ~ 0.175 0.2
(SAE) m3 (cu.yd) (0.07) (0.21) (0.09) (0.22) (0.26)
PERFORMANCE:
Swing speed RPM 9 9 9
Max travel speed km/h (MPH) Hi 4.6 (2.9) Hi 4.6 (2.9) Hi 4.3 (2.7)
Lo 2.8 (1.7) Lo 2.8 (1.7) Lo 2.6 (1.6)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU
Model 4D88E 4D88E 4D88E-5
No. of cylinders- mm 4-88 × 90 4-88 × 90 4-88 × 90
bore × stroke (in) (3.46 × 3.54) (3.46 × 3.54) (3.46 × 3.54)
Piston displacement ltr. (cu.in) 2.189 (134) 2.189 (134) 2.189 (134)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston+Gear pump Piston+Gear pump Piston+Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 134 (35.4) 134 (35.4) 134 (35.4)
2
Max. oil pressure kg/cm (PSI) 265 (3770) 275 (3910) 270 (3840)
Track shoe width/ mm (in)/ 400 (16)/ 400 (16)/ 400 (16)/
ground pressure kg/cm2 (PSI) 0.29 (4.1) 0.29 (4.1) 0.32 (4.6)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 65 (17.2) 65 (17.2) 80 (21.1)
Hydraulic oil tank 20 (5.3) 20 (5.3) 20 (5.3)
MACHINE SPEC:
Boom mm (ft.in) 2900 (9'6") 2900 (9'6") 2900 (9'6")
Arm mm (ft.in) 1640 (5'5") 1640 (5'5") 1640 (5'5")
Bucket (SAE) m3 (cu.yd) 0.16 (0.21) 0.15 (0.20) 0.2 (0.26)
Upper attachment ROPS Canopy Cab Cab
Model
PC75R-2 PC78US-6 PC78MR-6 PC95R-2
Item
Source Italy Japan Japan Italy
OPERATING WEIGHT* kg (lb) 7400 (16,310) 6850 (15,100) 8270 (18,230) 8800 (19,400)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 50 (68)/2300 40.5 (54)/1850 40.5 (54)/1850 61.5 (82.5)/2200
BUCKET CAPACITY RANGE 0.086 ~ 0.265 0.09 ~ 0.34 0.09 ~ 0.34 0.086 ~ 0.34
(SAE) m3 (cu.yd) (0.11) (0.35) (0.12) (0.45) (0.12) (0.45) (0.11) (0.44)
PERFORMANCE:
9.0
Swing speed RPM 10.2 10.0 10.0
Hi 5.0 (3.1)
Max travel speed km/h (MPH) Hi 5.1 (3.2) Hi 4.5 (2.8) Hi 4.2 (2.6)
Lo 3.1 (1.9) Lo 3.0 (1.9) Lo 2.8 (1.7)
Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D98E S4D95LE S4D95LE 4D106
No. of cylinders- mm 4-98 × 110 4-95 × 115 4-95 × 115 4-106 × 125
bore × stroke (in) (3.86 × 4.33) (3.74 × 4.53) (3.74 × 4.53) (4.17 × 4.92)
Piston displacement ltr. (cu.in) 3.318 (202) 3.26 (199) 3.26 (199) 4.412 (269)
HYDRAULIC SYSTEM: 1 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 227 (60) 160 (42.2) 160 (42.2) 242 (64)
Max. oil pressure kg/cm2 (PSI) 270 (3840) 270 (3840) 270 (2840) 280 (3980)
Track shoe width/ mm (in)/ 450 (18)/ 450 (18)/ 450 (18)/ 450 (18)/
ground pressure kg/cm2 (PSI) 0.34 (4.8) 0.33 (4.7) 0.38 (5.4) 0.38 (5.4)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 100 (26.4) 125 (33) 125 (33)
Hydraulic oil tank 70 (18.5) 56 (14.8) 64 (16.9)
MACHINE SPEC:
Boom mm (ft.in) 3000 (9'10") 3710 (12'2") 3400 (11'2") 2950 (9'7")
Arm mm (ft.in) 1700 (5'7") 1650 (5'5") 1650 (5'5") 1850 (6')
Bucket (SAE) m3 (cu.yd) 0.232 (0.30) 0.28 (0.37) 0.28 (0.37) 0.298 (0.39)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
2A-13
Specifications EXCAVATORS
(BACKHOE)
Model
PC120-6 PC120-6*** PC120LC-6*** PC138US-2
Item
Source Japan Japan Japan Japan
OPERATING WEIGHT* kg (lb) 12030 (26,520) 12220 (26,940) 12600 (27,780) 13480 (29,720)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 64 (86)/2200 66.2 (89)/2200 86.2 (89)/2200 66.2 (88.9)/2200
BUCKET CAPACITY RANGE 0.18 ~ 0.60 0.35 ~ 0.70 0.35 ~ 0.70 0.18 ~ 0.60
(SAE) m3 (cu.yd) (0.24) (0.78) (0.46) (0.92) (0.46) (0.92) (0.24) (0.78)
PERFORMANCE:
Swing speed RPM 11.0 11.0 11.0 11.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.0 (3.1) Hi 5.0 (3.1) Hi 5.1 (3.2)
Mi 3.6 (2.2) Mi 3.3 (2.1) Mi 3.3 (2.1)
Lo 2.7 (1.7) Lo 2.5 (1.6) Lo 2.5 (1.6) Lo 2.9 (1.8)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model S4D102E SAA4D102E SAA4D102E SAA4D95LE
No. of cylinders- mm 4-102 × 120 4-102 × 120 4-102 × 120 4-95 × 115
bore × stroke (in) (4.05 × 4.72) (4.05 × 4.72) (4.02 × 4.72) (3.74 × 4.53)
Piston displacement ltr. (cu.in) 3.92 (239) 3.92 (239) 3.92 (239) 3.26 (199)
HYDRAULIC SYSTEM: 1 × Variable 1 × Variable 1 × Variable 1 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 226 (60) 226 (60) 226 (60) 226 (60)
Max. oil pressure kg/cm2 (PSI) 355 (5050) 355 (5050) 355 (5050) 355 (5050)**
Track shoe width/ mm (in)/ 500 (20)/ 600 (24)/ 600 (24)/ 500 (20)/
ground pressure kg/cm2 (PSI) 0.40 (5.7) 0.34 (4.8) 0.33 (4.7) 0.43 (6.1)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 230 (60.8) 240 (63.4) 240 (63.4) 200 (52.8)
Hydraulic oil tank 100 (26.4) 100 (26.4) 100 (26.4) 69 (18.2)
MACHINE SPEC:
Boom mm (ft.in) 4600 (15'1") 4600 (15'1") 4600 (15'1") 4600 (15'1")
Arm mm (ft.in) 2500 (8'2") 2500 (8'2") 2500 (8'2") 2500 (8'2")
Bucket (SAE) m3 (cu.yd) 0.50 (0.65) 0.50 (0.65) 0.50 (0.65) 0.50 (0.65)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** For USA
*4 For UK
2A-14
Specifications EXCAVATORS
(BACKHOE)
Model PC130-6
PC138US-2*4 PC138USLC-2*** PC130-7
Item MIGHTY
Source Japan Japan Japan UK
OPERATING WEIGHT* kg (lb) 13480 (29,720) 14050 (30,980) 12350 (27,230) 12960 (28,570)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 66 (88)/2200 66.2 (89)/2200 64 (86)/2200 66 (88)/2200
BUCKET CAPACITY RANGE 0.25 ~ 0.72 0.35 ~ 0.70 0.50 0.25 ~ 0.80
(SAE) m3 (cu.yd) (0.33) (0.94) (0.46) (0.92) (0.65) (0.33) (1.05)
PERFORMANCE:
Swing speed RPM 10.5 11.0 11.0 11.0
Max travel speed km/h (MPH) Hi 5.1 (3.2) Hi 5.1 (3.2) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 3.6 (2.2)
Lo 2.9 (1.8) Lo 3.2 (2.0) Lo 2.7 (1.7) Lo 2.7 (1.7)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA4D95LE SAA4D95LE S4D102E SAA4D95LE
No. of cylinders- mm 4-95 × 115 4-95 × 115 4-102 × 120 4-95 × 115
bore × stroke (in) (3.74 × 4.53) (3.74 × 4.53) (4.02 × 4.72) (3.74 × 4.53)
Piston displacement ltr. (cu.in) 3.26 (199) 3.26 (199) 3.92 (239) 3.26 (199)
HYDRAULIC SYSTEM: 1 × Variable 1 × Variable 1 × Variable 1 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 226 (60) 226 (60) 226 (60) 312 (60)
Max. oil pressure kg/cm2 (PSI) 355 (5050)** 355 (5050)** 355 (5050)** 355 (5050)**
Track shoe width/ mm (in)/ 500 (20)/ 600 (24)/ 500 (20)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.43 (6.1) 0.35 (5.0) 0.41 (5.8) 0.30 (4.3)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 200 (52.8) 200 (52.8) 230 (60.8) 247 (65.3)
Hydraulic oil tank 69 (18.2) 69 (18.2) 100 (26.4) 90 (23.8)
MACHINE SPEC:
Boom mm (ft.in) 4600 (15'1") 4600 (15'1") 4600 (15'1") 4600 (15'1")
Arm mm (ft.in) 2500 (8'2") 2500 (8'2") 2500 (8'2") 2500 (8'2")
Bucket (SAE) m3 (cu.yd) 0.50 (0.65) 0.35 (0.46) 0.50 (0.65) 0.56 (0.73)
Model
PC130-7 PC160LC-7 PC160LC-7*4 PC160LC-7
Item
Source China Japan Japan, UK UK
OPERATING WEIGHT* kg (lb) 12600 (27,780) 16400 (36,160) 16620 (36,740) 16400 (36,160)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 66 (88)/2200 82.4 (111)/2200 82.4 (110)/2200 82 (111)/2200
BUCKET CAPACITY RANGE 0.36 ~ 0.64 0.60 ~ 0.70 0.45 ~ 0.95 0.27 ~ 0.95
(SAE) m3 (cu.yd) (0.47) (0.84) (0.78) (0.92) (0.59) (1.24) (0.35) (1.24)
PERFORMANCE:
Swing speed RPM 11.0 12.0 12.0 12.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
2A-15
Specifications EXCAVATORS
(BACKHOE)
Model
PC200-7*** PC200-7*4 PC200-7 PC200-7
Item
Source Japan Japan Thailand China
OPERATING WEIGHT* kg (lb) 19500 (42,990) 19500 (42,990) 20010 (44,110) 19700 (43,430)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 107 (143)/1950 107 (143)/1950 107 (143)/1950 107 (143)/1950
BUCKET CAPACITY RANGE 0.50 ~ 1.17 0.50 ~ 1.17 0.8 0.80 ~ 1.60
(SAE) m3 (cu.yd) (0.65) (1.53) (0.65) (1.53) (1.05) (1.05) (1.31)
PERFORMANCE:
Swing speed RPM 12.4 12.4 12.4 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-102 × 120 6-102 × 120 6-102 × 120 6-102 × 120
bore × stroke (in) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 800 (32)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.46 (6.5) 0.46 (6.5) 0.35 (4.98) 0.46 (6.5)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 400 (105.7) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank 143 (37.8) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 2925 (9'7") 2925 (9'7") 2925 (9'7") 2925 (9'7")
Bucket (SAE) m3 (cu.yd) 0.80 (1.05) 0.80 (1.05) 0.80 (1.05) 0.8 (1.05)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg (180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
q Tier 3 and stage 3A model
2A-16
Specifications EXCAVATORS
(BACKHOE)
Model q
PC200LC-7*** PC200LC-7*4 PC200LC-7 PC210-8
Item
Source Japan Japan China UK
OPERATING WEIGHT* kg (lb) 20900 (46,080) 20900 (46,080) 21100 (46,520) 21390 (47,160)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 116 (155)/2000
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 107 (143)/1950 107 (143)/1950 107 (143)/1950 110 (148)/2000
BUCKET CAPACITY RANGE 0.50 ~ 1.17 0.50 ~ 1.17 0.80 ~ 1.00 0.43 ~ 1.68
(SAE) m3 (cu.yd) (0.65) (1.53) (0.65) (1.53) (1.05) (1.31) (0.56) (2.2)
PERFORMANCE:
Swing speed RPM 12.4 12.4 12.4 12.4
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.1 (2.5) Mid 4.1 (2.5)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D107E
No. of cylinders- mm 6-102 × 120 6-102 × 120 6-102 × 120 6-107 × 124
bore × stroke (in) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.21 × 4.88)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 6.69 (408)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 439 (116)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)
Track shoe width/ mm (in)/ 700 (28)/ 700 (28)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.38 (5.4) 0.38 (5.4) 0.45 (6.4) 0.46 (6.54)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 400 (105.7) 400 (105.7) 400 (105.7) 325 (85.9)
Hydraulic oil tank 143 (37.8) 143 (37.8) 143 (37.8) 137 (36.2)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5700 (18'8") 5700 (18' 8")
Arm mm (ft.in) 2925 (9'7") 2925 (9'7") 2925 (9'7") 2925 (9' 7")
Bucket (SAE) m3 (cu.yd) 0.80 (1.05) 0.80 (1.05) 0.80 (1.05) 0.84 (1.10)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
q Tier 3 and stage 3A model
2A-17
Specifications EXCAVATORS
(BACKHOE)
Model q
PC220-8 PC220-7*** PC220-7*4 PC220-7
Item
Source Japan Japan Japan China
OPERATING WEIGHT* kg (lb) 22900 (50,490) 22840 (50,350) 22840 (50,350) 22900 (50,490)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 134 (179)/2000
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 125 (168)/2000 125 (168)/2200 125 (168)/2200 125 (168)/2000
BUCKET CAPACITY RANGE 0.72 ~ 1.26 0.72 ~ 1.26 0.72 ~ 1.26 0.72 ~ 1.26
(SAE) m3 (cu.yd) (0.94) (1.65) (0.94) (1.65) (0.94) (1.65) (0.94) (1.65)
PERFORMANCE:
Swing speed RPM 11.7 11.7 11.7 11.7
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mid 4.2 (2.6) Mi 4.2 (2.6) Mi 4.2 (2.6)
Lo 3.1 (1.9) Lo 3.1 (1.9) Lo 3.1 (1.9) Lo 3.1 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D107E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm 6-107 × 124 6-102 × 120 6-102 × 120 6-102 × 120
bore × stroke (in) (4.21 × 4.88) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 6.69 (408) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 439 (116) 439 (116) 439 (116) 432 (114)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.51 (7.25) 0.51 (7.3) 0.51 (7.3) 0.51 (7.3)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 400 (105.7)/ 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank 135 (35.7) 143 (37.8) 143 (37.8) 143 (37.8)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19.2)/ 5850 (19'2") 5850 (19'2") 5850 (19'2")
Arm mm (ft.in) 3045 (10'0") 3045 (10'0") 3045 (10'0") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 1.00 (1.31) 1.0 (1.31) 1.0 (1.31) 1.0 (1.31)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
q Tier 3 and stage 3A model
2A-18
Specifications EXCAVATORS
(BACKHOE)
Model q q
PC220LC-7 PC228US-3E0 PC228US-3 PC228USLC-3E0
Item
Source China Japan Japan Japan
OPERATING WEIGHT* kg (lb) 24200 (53,350) 21900 (48,280) 21680 (47,800) 22900 (50,490)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 116 (155)/2000 116 (155)/2000
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 125 (168)/2000 110 (148)/2000 107 (143)/1950 110 (148)/2000
BUCKET CAPACITY RANGE 0.72 ~ 1.26 0.50 ~ 1.05 0.50 ~ 1.05 0.50 ~ 1.05
(SAE) m3 (cu.yd) (0.94) (1.65) (0.65) (1.37) (0.65) (1.37) (0.65) (1.37)
PERFORMANCE:
Swing speed RPM 11.7 11.0 11.0 11.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.2 (2.6) Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.1 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.4 (2.1)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D107E SAA6D102E SAA6D107E
No. of cylinders- mm 6-102 × 120 6-107 × 124 6-102 × 120 6-107 × 124
bore × stroke (in) (4.02 × 4.72) (4.21 × 4.88) (4.02 × 4.72) (4.21 × 4.88)
Piston displacement ltr. (cu.in) 5.88 (359) 6.69 (408) 5.88 (359) 6.69 (408)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 432 (114) 440 (116) 428 (113) 440 (116)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.50 (7.1) 0.51 (7.25) 0.51 (7.25) 0.41 (5.83)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 400 (105.7) 320 (84.5) 320 (84.5) 320 (84.5)
Hydraulic oil tank 143 (37.8) 126 (33.3) 126 (33.3) 126 (33.3)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19'2") 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 3045 (10'0") 2925 (9'7") 2925 (9'7") 2925 (9'7")
Bucket (SAE) m3 (cu.yd) 1.0 (1.31) 0.8 (1.05) 0.8 (1.05) 0.8 (1.05)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
*5 For USA *6 For UK
q
Tier 3 and stage 3A model
2A-19
Specifications EXCAVATORS
(BACKHOE)
Model
PC228USLC-3 PC228US-3*5 PC228USLC-3*5 PC228USLC-3*4*5
Item
Source Japan Japan Japan Japan
OPERATING WEIGHT* kg (lb) 22900 (50,490) 21500 (47,400) 22900 (50,490) 23850 (52,580)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 107 (143)/1950 107 (143)/1950 107 (143)/1950 107 (143)/1950
BUCKET CAPACITY RANGE 0.50 ~ 1.05 0.48 ~ 1.68 0.48 ~ 1.68 0.48 ~ 1.68
(SAE) m3 (cu.yd) (0.65) (1.37) (0.63) (2.20) (0.63) (2.20) (0.63) (2.20)
PERFORMANCE:
Swing speed RPM 11.0 11.0 11.0 11.0
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5) Mi 4.1 (2.5)
Lo 3.4 (2.1) Lo 3.0 (2.1) Lo 3.0 (2.1) Lo 3.0 (2.1)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D102E SAA6D102E SAA6D102E SAA6D102
No. of cylinders- mm 6-102 × 120 6-102 × 120 6-102 × 120 6-102 × 120
bore × stroke (in) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 428 (113) 428 (113) 428 (113) 428 (113)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 700 (28)/ 600 (24)/ 700 (28)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.42 (6.0) 0.51 (7.3) 0.41 (5.8) 0.43 (6.1)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 320 (84.5) 320 (84.5) 320 (84.5) 320 (84.5)
Hydraulic oil tank 126 (33.3) 126 (33.3) 126 (33.3) 126 (33.3)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18'8") 5700 (18'8") 5700 (18'8")
Arm mm (ft.in) 2925 (9'7") 2925 (9'7") 2925 (9'7") 2925 (9'7")
Bucket (SAE) m3 (cu.yd) 0.8 (1.05) 0.78 (1.02) 0.78 (1.02) 0.78 (1.02)
Model q q q q
PC230NHD-8 PC240LC-8 PC240NLC-8 PC270-8
Item
Source UK UK UK Japan
OPERATING WEIGHT* kg (lb) 22820 (50,310) 25500 (56,220) 24600 (54,230) 27140 (59,830)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 116 (155)/2000 134 (179)/2000 134 (179)/2000 149 (200)/2050
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 110 (148)/2000 125 (168)/2000 125 (168)/2000 140 (187)/2050
BUCKET CAPACITY RANGE 0.43 ~ 1.58 0.47 ~ 1.89 0.47 ~ 1.89 1.26
(SAE) m3 (cu.yd) (0.56) (2.07) (0.61) (2.47) (0.61) (2.47) (1.65)
PERFORMANCE:
Swing speed RPM 12.4 11.7 11.7 10.5
Max travel speed km/h (MPH) Hi 5.4 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mid 3.6 (2.2) Mid 4.1 (2.5) Mid 4.1 (2.5) Mid 4.1 (2.5)
Lo 2.6 (1.6) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D107E SAA6D107E SAA6D107E SAA6D107E
No. of cylinders- mm 6-107 × 124 6-107 × 124 6-107 × 124 6-107 × 124
bore × stroke (in) (4.21 × 4.88) (4.21 × 4.88) (4.21 × 4.88) (4.21 × 4.88)
Piston displacement ltr. (cu.in) 6.69 (415) 6.69 (408) 6.69 (408) 6.69 (408)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 438 (116) 439 (116) 439 (116) 450 (119)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 550 (22)/ 700 (28)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.56 (8.0) 0.44 (6.26) 0.52 (7.39) 0.56 (7.96)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 325 (85.9) 400 (105.7) 400 (105.7) 400 (105.7)
Hydraulic oil tank 137 (36.2) 135 (35.7) 135 (35.7) 132 (34.9)
MACHINE SPEC:
Boom mm (ft.in) 5700 (18' 8") 5850 (19.2) 5850 (19.2) 5850 (19' 2")
Arm mm (ft.in) 2400 (7' 10") 3045 (10'0") 3045 (10'0") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 1.16 (1.52) 1.41 (1.84) 1.41 (1.84) 1.26 (1.65)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
3
* For USA.
*4 With two piece boom
*5 For UK
q Tier 3 and stage 3A model
2A-20
Specifications EXCAVATORS
(BACKHOE)
Model q q
PC290NLC-8 PC300-7E0 PC300-7*** PC300-7*4
Item
Source UK Japan Japan Japan
OPERATING WEIGHT* kg (lb) 29400 (64,820) 30800 (67,900) 30800 (67,900) 30800 (67,900)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 149 (200)/2050 194 (260)/1950
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 140 (187)/2050 184 (246)/1950 180 (242)/1900 180 (242)/1900
BUCKET CAPACITY RANGE 0.85 ~ 2.02 0.52 ~ 1.40** 0.52~1.40 0.52~1.40
(SAE) m3 (cu.yd) (1.11) (2.64) (0.68 )(1.83) (0.68) (1.83) (0.68) (1.83)
PERFORMANCE:
Swing speed RPM 10.5 9.5 9.5 9.5
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mid 4.1 (2.5) Mi4.5 (2.8) Mi 4.5 (2.8)
Lo 3.0 (1.9) Lo3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D107E SAA6D114E SAA6D114E SAA6D114E
No. of cylinders- mm 6-107 × 124 6-114 × 135 6-114 × 135 6-114 × 135
bore × stroke (in) (4.21 × 4.88) (4.49 × 5.31) (4.49 × 5.31) (4.49 × 5.31)
Piston displacement ltr. (cu.in) 6.69 (408) 8.27 (505) 8.27 (505) 8.27 (505)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 450 (119) 535 (141) 535 (141) 535 (141)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.56 (7.96) 0.64 (9.10) 0.64 (9.1) 0.64 (9.1)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 400 (105.7) 605 (160)/ 605 (160) 605 (160)
Hydraulic oil tank 132 (34.9) 188 (49.7) 188 (49.7) 188 (49.7)
MACHINE SPEC:
Boom mm (ft.in) 5850 (19.2) 6470 (21' 3") 6470 (21'3") 6470 (21'3")
Arm mm (ft.in) 2500 (8'2") 3185 (10' 5") 3185 (10'5") 3185 (10'5")
Bucket (SAE) m3 (cu.yd) 1.74 (2.26) 1.4 (1.83) 1.40 (1.83) 1.40 (1.83)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
q Tier 3 and stage 3A model
2A-21
Specifications EXCAVATORS
(BACKHOE)
Model q
PC300LC-7E0 PC300LC-7*** PC300LC-7*4 PC308USLC-3E0
Item
Source USA Japan Japan Japan
OPERATING WEIGHT* kg (lb) 34190 (75,380) 31900 (70,330) 31900 (70,330) 32630 (71,938)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 194 (260)/1950 149 (200)/2050
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 184 (246)/1950 180 (242)/1900 180 (242)/1900 140 (187)/2050
BUCKET CAPACITY RANGE 0.68 ~ 1.96 0.52~1.40 0.52~1.40 0.58 ~ 1.63
(SAE) m3 (cu.yd) (0.89) (2.56) (0.68) (1.83) (0.68) (1.83) (0.76) (2.13)
PERFORMANCE:
Swing speed RPM 9.5 9.5 9.5 9.5
Max travel speed km/h (MPH) Hi5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 4.6 (2.85)
Mi4.5 (2.8) Mi 4.5 (2.8) Mi 3.4 (2.1)
Lo3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 2.9 (1.8)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E-3 SAA6D114E SAA6D114E SAA6D107E
No. of cylinders- mm 6-114 × 135 6-114 × 135 6-114 × 135 6-107 × 124
bore × stroke (in) (4.49 × 5.31) (4.49 × 5.31) (4.49 × 5.31) (4.21 × 4.88)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 8.27 (505) 5.88 (359)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 535 (141) 535 (141) 535 (141) 450 (119)
Max. oil pressure kg/cm2 (PSI) 380 (5400)* 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 800 (31.5)/ 700 (28)/ 700 (28)/ 850 (33.5)/
ground pressure kg/cm2 (PSI) 0.49 (6.97) 0.52 (7.36) 0.52 (7.36) 0.44 (6.3)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 605 (160) 605 (160) 605 (160) 390 (103)
Hydraulic oil tank 188 (49.7) 188 (49.7) 188 (49.7) 210 (55.5)
MACHINE SPEC:
Boom mm (ft.in) 6470 (21' 3") 6470 (21'3") 6470 (21'3") 5842 (19'2")
Arm mm (ft.in) 3185 (10' 5") 3185 (10'5") 3185 (10'5") 3045 (10'0")
Bucket (SAE) m3 (cu.yd) 1.96 (2.56) 1.40 (1.83) 1.40 (1.83) 1.21 (1.59)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec.
q Tier 3 and stage 3A model
2A-22
Specifications EXCAVATORS
(BACKHOE)
Model q
PC350LC-7E0 PC350LC-7 PC360-7 PC380LC-7
Item
Source Japan Japan China UK
OPERATING WEIGHT* kg (lb) 33400 (73,630) 33400 (73,630) 33000 (72,750) 40300 (88,850)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 194 (260)/1950
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 184 (246)/1950 180 (242)/1900 180 (242)/1900 180 (242)/1900
BUCKET CAPACITY RANGE 1.40 1.40 1.60 1.12 ~ 2.54
(SAE) m3 (cu.yd) (1.83) (1.83) (2.09) (1.46) (3.32)
PERFORMANCE:
Swing speed RPM 9.5 9.5 9.5 9.5
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 4.3 (2.7)
Mid 4.5 (2.8) Mi 4.5 (2.8) Mi 4.5 (2.8) Mi 3.4 (2.1)
Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 3.2 (2.0) Lo 2.0 (1.2)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D114E SAA6D114E SAA6D114E SAA6D114E
No. of cylinders- mm 6-114 x135 6-114 × 135 6-114 × 135 6-114 × 135
bore × stroke (in) (4.49 × 5.31) (4.49 × 5.31) (4.49 × 5.31) (4.49 × 5.31)
Piston displacement ltr. (cu.in) 8.27 (505) 8.27 (505) 8.27 (505) 8.27 (505)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 535 (141) 535 (141) 535 (141) 536 (142)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 380 (5400)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 700 (28)/
ground pressure kg/cm2 (PSI) 0.67 (9.52) 0.67 (9.52) 0.0.69 (9.8) 0.61 (8.7)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 605 (160)/ 605 (160) 605 (160) 605 (160)
Hydraulic oil tank 188 (49.7) 188 (49.7) 188 (49.7) 188 (49.7)
MACHINE SPEC:
Boom mm (ft.in) 6470 (21'3") 6470 (21'3") 6470 (21'3") 6470 (21'3")
Arm mm (ft.in) 3185 (10'5") 3185 (10'3") 3185 (10'3") 3190 (10'6")
Bucket (SAE) m3 (cu.yd) 1.4 (1.83) 1.40 (1.83) 1.60 (2.09) 1.38 (1.81)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
q
Tier 3 and stage 3A model
2A-23
Specifications EXCAVATORS
(BACKHOE)
Model q
PC400LC-7E0 PC400LC-7*** PC400LC-7*4 PC400LCSE-7
Item
Source Japan Japan Japan Indonesia
OPERATING WEIGHT* kg (lb) 42850 (94,470) 42850 (94,470) 42850 (94,470) 44190 (97,420)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 270 (362)/1900
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 257 (345)/1900 246 (330)/1850 246 (330)/1850 246 (330)/2050
BUCKET CAPACITY RANGE 1.3 ~ 2.2 1.3 ~ 2.2 1.3 ~ 2.2 2.8 ~ 3.2
(SAE) m3 (cu.yd) (1.70) (2.88) (1.7) (2.9) (1.7) (2.9) (3.66) (4.20)
PERFORMANCE:
Swing speed RPM 9.1 9.0 9.0 9.3
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mid 4.4 (2.7) Mid 4.4 (2.7)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.2 (2.0) Lo 3.2 (2.0)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D125E SAA6D125E SAA6D125E SAA6D125E
No. of cylinders- mm 6-125 × 150 6-125 × 150 6-125 × 150 6-125 × 150
bore × stroke (in) (4.92 × 5.91) (4.92 × 5.90) (4.92 × 5.90) (4.92 × 5.90)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674) 11.04 (674) 11.04 (673)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 690 (182) 690 (182) 690 (182) 652 (172)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 355 (5050)**
Track shoe width/ mm (in)/ 700 (28)/ 700 (28)/ 700 (28)/ 800 (32)/
ground pressure kg/cm2 (PSI) 0.66 (9.39) 0.66 (9.4) 0.66 (9.4) 0.59 (8.4)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 650 (172)/ 650 (172) 650 (172) 605 (160)
Hydraulic oil tank 248 (65.5) 248 (65.5) 248 (65.5) 270 (71.3)
MACHINE SPEC:
Boom mm (ft.in) 7060 (23'2") 7060 (23'2") 7060 (23'2") 7060 (23'2")
Arm mm (ft.in) 3380 (11'1") 3380 (11'1") 3380 (11'1") 2400 (7'10")
Bucket (SAE) m3 (cu.yd) 1.9 (2.49) 1.90 (2.49) 1.90 (2.49) 3.2 (4.20)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
*** Basic spec.
*4 Deluxe spec
q Tier 3 and stage 3A model
2A-24
Specifications EXCAVATORS
(BACKHOE)
Model q q q
PC450LC-7E0 PC450LC-7 PC450LC-7E0 HD PC600-8
Item
Source Japan Japan UK Japan
OPERATING WEIGHT* kg (lb) 44000 (97,000) 44000 (97,000) 46155 (101,750) 57300 (126,320)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 270 (362)/1900 270 (362)/1900 323 (433)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 320 (429)/1800
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 257 (345)/1900 246 (330)/1850 257 (345)/1900 288 (386)/1800
BUCKET CAPACITY RANGE 1.90 ~ 2.10 1.90 ~ 2.10 2.20 ~ 3.50 2.0 ~ 3.5
(SAE) m3 (cu.yd) (2.49) (2.75) (2.49) (2.75) (2.87) (4.69) (2.62) (4.58)
PERFORMANCE:
Swing speed RPM 9.1 9.0 9.0 8.3
Max travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 4.9 (3.0)
Mid 4.4 (2.7) Mi 4.4 (2.7) Mid 4.4 (2.7)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of
dimensions.
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D125E SAA6D125E SAA6D125E SAA6D140E
No. of cylinders- mm 6-125 × 150 6-125 × 150 6-125 × 150 6-140 × 165
bore × stroke (in) (4.92 × 5.91) (4.92 × 5.90) (4.92 × 5.91) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (673) 11.04 (674) 15.24 (930)
HYDRAULIC SYSTEM: 2 × Variable 2 × Variable 2 × Variable 2 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 690 (182) 690 (182) 690 (182) 820 (217)
Max. oil pressure kg/cm2 (PSI) 380 (5400)** 380 (5400)** 380 (5400)** 350 (4980)**
Track shoe width/ mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 600 (24)/
ground pressure kg/cm2 (PSI) 0.79 (11.2) 0.79 (11.2) 0.82 (11.7) 1.04 (14.8)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 650 (172)/ 650 (172) 650 (172) 880 (232.5)/
Hydraulic oil tank 248 (65.5) 248 (65.5) 248 (65.5) 360 (95.0)
MACHINE SPEC:
Boom mm (ft.in) 7060 (23'2") 7060 (23'2") 6670 (21'11") 7660 (25'2")
Arm mm (ft.in) 3380 (11'1") 3380 (11'1") 2400 (7'19") 3500 (11'6")
Bucket (SAE) m3 (cu.yd) 1.9 (2.49) 1.90 (2.49) 1.90 (2.49) 2.7 (3.53)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
** Travel circuit and at Power Max. function
q
Tier 3 and stage 3A model
2A-25
Specifications EXCAVATORS
(BACKHOE)
Model q q
PC600LC-7 PC800-8 PC800-8 PC750-7
Item
Source Japan Japan UK Japan
OPERATING WEIGHT* kg (lb) 57600 (126,990) 74200 (163,580) 79400 (175,050) 72370 (159,550)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 370 (496)/1800 370 (496)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 363 (487)/1800 363 (487)/1800
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 287 (385)/1800 338 (454)/1800 338 (454)/1800 338 (454)/1800
BUCKET CAPACITY RANGE 2.0 ~ 3.5 2.8 ~ 3.4 3.6 ~ 6.0 2.8 ~ 3.4
(SAE) m3 (cu.yd) (2.62) (4.58) (3.66) (4.45) (4.71) (7.85) (3.66) (4.45)
PERFORMANCE:
Swing speed RPM 8.3 6.8 6.8 6.8
Max travel speed km/h (MPH) Hi 4.9 (3.0) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6)
2A-26
Specifications EXCAVATORS
(BACKHOE)
Model q q
PC750SE-7 PC850-8 PC800-7 PC850SE-8
Item
Source Japan Japan Japan Japan
OPERATING WEIGHT* kg (lb) 73170 (161,310) 78700 (173,500) 76070 (167,700) 78300 (172,620)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 370 (496)/1800 370 (496)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 363 (487)/1800 363 (487)/1800
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 338 (454)/1800 338 (454)/1800 338 (454)/1800 338 (454)/1800
BUCKET CAPACITY RANGE 4.0 ~ 4.5 3.4 3.4 4.0 ~ 4.5
(SAE) m3 (cu.yd) (5.23) (5.89) (4.45) (4.45) (5.23) (5.87)
PERFORMANCE:
Swing speed RPM 6.8 6.8 6.8 6.8
Max travel speed km/h (MPH) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6) Hi 4.2 (2.6)
2A-27
Specifications EXCAVATORS
(BACKHOE)
Model
PC1250SP-7 PC1800-6 PC3000-6 PC4000-6
Item
Source Japan Japan Germany Germany
OPERATING WEIGHT* kg (lb) 109500 (241,400) 180000 (396,830) 253000 (557,760) 390000 (860,000)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 485 (651)/1800 908 (676)/1800 940 (1260)/1800 1400 (1875)/1800
BUCKET CAPACITY RANGE 6.7 5.6 ~ 12.0 12 ~ 20 16 ~ 28
(SAE) m3 (cu.yd) (8.76) (7.3) (15.7) (15.7) (26.2) (20.9) (36.6)
PERFORMANCE:
Swing speed RPM 5.5 4.5 4.6 4.0
Max travel speed km/h (MPH) Hi 3.2 (2.0) 2.7 (1.7) 2.4 (1.5) 2.1 (1.3)
Lo 2.1 (1.3)
DIMENSIONS: See the page of
dimensions.
KOMATSU
ENGINE: KOMATSU KOMATSU KOMATSU
SAA6D140E × 2
Model SAA6D170E SSA12V159 SDA16V160
6-140 × 165
No. of cylinders- mm 6-170 × 170 12-159 × 159 16-159 × 190
(5.51 × 6.50)
bore × stroke (in) (6.69 × 6.69) (6.26 × 6.26) (6.26 × 7.48)
15.24 × 2 (930 ×
Piston displacement ltr. (cu.in) 23.15 (1413) 37.5 (2288) 60.2 (3673)
2)
HYDRAULIC SYSTEM: 3 × Variable 6 × Variable 3 × Variable 4 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 1588 (420) 2304 (609) 2730 (721) 4140 (1094)
Max. oil pressure kg/cm2 (PSI) 350 (4980)*** 320 (4550)*** 315 (4495) 315 (4495)
Track shoe width/ mm (in)/ 700 (28)/ 810 (32)/ 800 (31.4)/ 1200 (47)/
ground pressure kg/cm2 (PSI) 1.43 (20.3) 1.73 (24.6) 2.42 (34.4) 2.32 (33.0)
CAPACITY (Refilled):
Fuel tank ltr. (U.S.Gal) 1360 (359) 25750 (727) 4500 (1190) 6400 (1690)
Hydraulic oil tank 670 (177) 1500 (396) 2900 (765) 3900 (1030)
MACHINE SPEC:
Boom mm (ft.in) 7800 (25'7") 8700 (28'7") 8600 (28'3") 9750 (32'0")
Arm mm (ft.in) 3400 (11'2") 3900 (12'10") 4000 (13'1") 4500 (14'9")
Bucket (SAE) m3 (cu.yd) 6.7 (8.76) 12.0 (15.7) 15.0 (19.5) 22 (28.8)
* Operating weight includes coolant, lubricants, full fuel tank, operator 80kg(180lb) and, indicated implement, shoes and upper
attachment.
*** Travel circuit and heavy lift circuit
q Tier 3 and stage 3A model
2A-28
Specifications EXCAVATORS
(BACKHOE)
Model
PC5500-6 PC8000-6
Item
Source Germany Germany
525000 710000
OPERATING WEIGHT* kg (lb)
(1,157,000) (1,565,270)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 1880 (2520)/1800 3000 (4020)/1800
BUCKET CAPACITY RANGE 21 ~ 36 28 ~ 48
(SAE) m3 (cu.yd) (27.5) (47.1) (36.6) (62.8)
PERFORMANCE:
Swing speed RPM 3.4 3.5
Max travel speed km/h (MPH) 2.2 (1.4) 2.2 (1.4)
2A-29
Dimensions EXCAVATORS
(BACKHOE)
E L
D
K
C
G
I
H A
J B FVBH0017
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
650 915 290 650 570 100 450 130 580 2100 0.92 0.48
PC01-1 — —
(2'2") (3') (11") (2'2") (1'10") (3.9") (1'6") (5") (1'11") (6'11") (3') (1'7")
900 1225 350 790 700 2100 180 520 180 700 2730 1.357 0.684
PC09-1 —
(2'11") (4') (1'2") (2'7") (2'4") (6'11") (7.1") (1'8") (7") (2'4") (8'11") (4'5") (2'3")
3626 0.88
1015 437 1070 2229 770 230 1000 (11'11") (2'11")
PC12R-8 — —
(3'4") (1'5") (3'6") (7'4") (2'6") (9") (3'3") 3647 1.13
(12') (3'8")
3380 0.88
1015 1380 430 980 2410 205 770 230 1000 825 (11'1") (2'11")
PC14R-2 —
(3'4") (4'6") (1'5") (3'3") (7'11") (8.1") (2'6") (9") (3'3") (2'8") 3400 1.13
(11'2") (3'8")
3745 0.965
1015 437 1070 2229 770 230 1000 (12'3") (3'2")
PC15R-8 — —
(3'4") (1'5") (3'6") (7'4") (2'6") (9") (3'3") 3780 1.215
(12'5") (4')
3525 0.965
1015 1380 430 980 2410 205 770 230 1000 825 (11'7") (3'2")
PC16R-2 —
(3'4") (4'6") (1'5") (3'3") (7'11") (8.1") (2'6") (9") (3'3") (2'8") 3540 1.215
(11'7") (4'0")
770/ 1000/ 3570 0.965
1212 1555 440 790 2430 205 (2'6") 230 (3'3") 690 (11'9") 1.76 (3'2")
PC15MRX-1
(4'0") (5'1") (1'5") (2'7") (8'10") (8.1") 1020 (9") 1250 (2'3") (5'6") 1.215
(3'3") (4'1") (4'0")
750/ 980/ 3650 0.965
1212 1555 430 750 980 2410 170 (2'6") 230 (3'3") 705 (12'0") 1.76 (3'2")
PC18MR-2
(4'0") (5'1") (1'5") (2'6") (3'3") (7'11") (6.7") 1070 (9") 1300 (2'4") 3665 (5'6") 1.215
(3'6") (4'3") (12'0") (4'0")
3810 1.015
1440 1880 530 920 1390 2520 285 1200 250 1450 805 (12'6") 1.86 (3'4")
PC20MR-2
(4'9") (6'2") (1'9") (3'0") (4'7") (8'3") (11.2") (3'11") (10") (4'9") (2'8") 3935 (6'1") 1.365
(12'11") (4'6")
4320 1.11
1485 1950 545 955 1485 2530 320 1250 300 1550 855 (14'2") 2.2 (3'8")
PC27MR-2
(4'10") (6'5") (1'9") (3'2") (4'10") (8'4") (12.6") (4'1") (12") (5'1") (2'10") 4355 (6'11") 1.41
(14'3") (4'8")
4320 1.11
1485 1950 545 955 1485 2530 320 1250 300 1550 855 (14'2") 2.2 (3'8")
PC27MR-2*4 (4'10") (6'5") (1'9") (3'2") (4'10") (8'4") (12.6") (4'1") (12") (5'1") (2'10") (6'11")
4355 1.41
(14'3") (4'8")
4630 1.26
1650 2105 545 1050 1485 2530 320 1250 300 1550 855 (15'2") 2.35 (4'1")
PC30MR-2*
(5'5") (6'11") (1'9") (3'5") (4'10") (8'4") (12.6") (4'1") (12") (5'1") (2'10") 4660 (7'9") 1.66
(15'3") (5'5")
4630 1.26
1650 2105 545 1050 1485 2530 320 1250 300 1550 755 (15'2") 2.35 (4'1")
PC30MR-2**
(5'5") (6'11") (1'9") (3'5") (4'10") (8'4") (12.6") (4'1") (12") (5'1") (2'6") 4660 (7'9") 1.66
(15'3") (5'5")
4850 1.35
1650 2105 545 1050 1485 2530 320 1440 300 1740 950 (15'11") 2.56 (4'5")
PC35MR-2*
(5'5") (6'11") (1'9") (3'5") (4'10") (8'4") (12.6") (4'9") (12") (5'9") (3'1") 4930 (8'5") 1.75
(16'2") (5'9")
4850 1.35
1650 2105 545 1050 1485 2530 290 1440 300 1740 870 (15'11") 2.56 (4'5")
PC35MR-2**
(5'5") (6'11") (1'9") (3'5") (4'10") (8'4") (11.4") (4'9") (12") (5'9") (2'10") 4930 (8'5") 1.75
(16'2") (5'9")
5390 1.44
2000 2520 625 1265 1835 2625 320 1560 400 1960 1060 (17'8") 2.74 (4'9")
PC40MR-2*
(6'7") (8'3") (2'1") (4'2") (6'0") (8'7") (12.6") (5'1") (16") (6'5") (3'6") 5450 (9'0") 1.9
(17'11") (6'3")
2A-30
Dimensions EXCAVATORS
(BACKHOE)
E L
D
K
C
G
I
H A
J B FVBH0017
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
5550 1.64
2000 2520 625 1265 1835 2625 320 1560 400 1960 1060 (18'3") 2.90 (5'5")
PC50MR-2*
(6'7") (8'3") (2'1") (4'2") (6'0") (8'7") (12.6") (5'1") (16") (6'5") (3'6") 5615 (9'6") 2.0
(18'5") (6'7")
5550 1.64
2000 2520 625 1265 1835 2625 320 1560 400 1960 980 (18'3") 2.90 (5'5")
PC50MR-2**
(6'7") (8'3") (2'1") (4'2") (6'0") (8'7") (12.6") (5'1") (16") (6'5") (3'3") 5615 (9'6") 2.0
(18'5") (6'7")
1980 2500 625 1265 1835 2660 320 1560 400 1960 1060 5590 2.90 1.64
PC55MR-2***
(6'6") (8'2") (2'1") (4'2") (6'0") (8'9") (12.6") (5'1") (16") (6'5") (3'6") (18'4") (9'6") (5'5")
2A-31
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
5875 1.7
2200 2785 750 1475 2000 2690 400 1650 450 2050 1690 (19'3") (5'7")
PC75R-2
(7'3") (9'2") (2'6") (4'10") (6'7") (8'10) (1'4") (5'5") (18") (6'9") (5'7") 2.1
(6'11")
6286 2465 1.65
2235 2840 735 1240 2330 2730 360 1870 450 2320 1745 (20'7") (8'1") 3.71 (5'5")
PC78US-6
(7'4") (9'4") (2'5") (4'1") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (5'9") 5785 2830 (12'2") 2.25
(19'0") (9'3") (7'5")
6200 2200 1.65
2235 2840 735 1260 2330 2730 360 1870 450 2320 1745 (20'4") (7'3") 3.40 (5'5")
PC78MR-6
(7'4") (9'4") (2'5") (4'2") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (5'8") (11'2") 2.25
(7'5")
6150 2300 1.85
2340 785 1510 2120 2695 430 1800 450 2200 1715 (20'2") (7'7") 2.95 (6'1")
PC95R-2
(7'8") (2'7") (4'11") (6'11") (8'10") (1'5") (5'11") (18") (7'3") (5'8") 6205 2700 (9'8") 2.3
(20'4") (7'7") (7'7")
PC100F-6 2890 3755 1120 2130 2455 3135 600 1960 900 2860 2050 7475 2686 4.26 2.36
(LOGGING) (9'5") (12'3") (3'7") (7') (8'1") (10'3") (2') (6'4") (35.4") (9'4") (6'9") (24'6") (8'8") (14') (7'9")
PC100F-6 2890 3755 1120 2130 2455 2960 600 1960 900 2860 2050 7175 2720 4.26 2.36
(AGRO) (9'5") (12'3") (3'7") (7') (8'1") (9'7") (2') (6'4") (35.4") (9'4") (6'9") (23'6") (8'11") (14') (7'9")
PC100F-6Z 2890 3755 1120 2130 2455 2960 600 1960 900 2860 2050 7175 2720 4.26 2.36
(AGRO ECO) (9'5") (12'3") (3'7") (7') (8'1") (9'7") (2') (6'4") (35.4") (9'4") (6'9") (23'6") (8'11") (14') (7'9")
1.85
(6'1")
2420 868 1577 2120 2790 1900 500 2400 6480 2715 2.0
PC110R-1
(7'11") (2'10") (5'2") (6'11") (9'2") (6'3") (20") (7'10") (21'3") (8'11) (6'7")
2.3
(7'7")
7590 2620 2.1
(24'11") (8'7") (6'11")
2750 3480 855 2110 2455 2715 400 1960 500 2460 1805 7595 2715 4.6 2.5
PC120-6
(9') (11'5") (2'10") (6'11") (8'1") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'8") (10'1") (9'10")
7590 2620 2.1
(24'11") (8'7") (6'11")
PC120-6* 2750 3480 855 2110 2455 2715 400 1960 600 2560 1805 7595 2715 4.6 2.5
(9') (11'5") (2'10") (6'11") (8'1") (8'11") (1'4") (6'5") (24") (8'5") (5'11") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'8") (10'1") (9'10")
7590 2620 2.1
(24'11") (8'7") (6'11")
3100 3830 895 2110 2445 2755 400 1990 600 2590 1845 7595 2715 4.6 2.5
PC120LC-6*
(10'2") (12'7") (2'11") (6'11") (8'1") (8'11") (1'4") (6'6") (24") (8'6") (6'1") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'11") (10'1") (9'10")
7225 2630 2.1
(23'8") (8'8") (6'11")
PC138US-2 2880 3610 895 1480 2515 2815 390 1990 500 2490 1975 7260 2850 4.6 2.5
(9'5") (11'10") (2'11") (4'10") (8'3") (9'3") (1'3") (6'6") (20") (8'2") (6'6") (23'10") (9'4") (15'1") (8'2")
7120 3190 3.0
(23'4") (10'6") (9'10")
7225 2630 2.1
(23'8") (8'8") (6'11")
2880 3610 900 1480 2515 2815 395 1990 500 2490 1980 7260 2850 4.6 2.5
PC138US-2**
(9'5") (11'10") (2'11") (4'10") (8'3") (9'3") (1'4") (6'6") (20") (8'2") (6'6") (23'10") (9'4") (15'1") (8'2")
7120 3190 3.0
(23'4") (10'6") (9'10")
7410 2690 2.1
(24'4") (8'10") (6'11")
PC138USLC 3100 3480 900 1480 2515 2815 395 1990 600 2590 1980 7395 2850 4.6 2.5
-2* (9'11") (12'7") (2'11") (4'10") (8'3") (9'3") (1'4") (6'6") (24") (8'6") (6'6") (24'3") (9'4") (15'1") (8'2")
7295 3190 3.0
(23'11") (10'6") (9'10")
* For USA
** For UK
2A-32
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
7590 2620 2.1
(24'11") (8'7") (6'11")
2880 3610 855 2110 2490 2810 400 1990 500 2490 1885 7595 2715 4.6 2.5
PC130-7*5 (9'5") (11'10") (2'10") (7') (8'2") (9'3") (1'4") (6'6") (20") (8'2") (6'2") (24'11") (8'11") (15'1") (8'2")
7510 3075 2.9
(24'8") (10'1") (9'6")
7790 2885 2.1
(25'7") (9'6") (6'11")
PC130-7*6 2880 3610 855 2110 2490 2810 400 1990 500 2490 1885 7760 2975 4.6 2.5
(9'5") (11'10") (2'10") (7') (8'2") (9'3") (1'4") (6'6") (20") (8'2") (6'2") (25'6") (9'9") (15'1") (8'2")
7630 3225 2.9
(25'0") (10'7") (9'6")
7590 2620 2.1
(24'11") (8'7") (6'11")
PC130-7*4 2880 3610 855 2110 2490 2810 400 1990 500 2490 1885 7595 2715 4.6 2.5
(9'5") (11'10") (2'10") (7') (8'2") (9'3") (1'4") (6'6") (20") (8'2") (6'2") (24'11") (8'11") (15'1") (8'2")
7510 3075 3.0
(24'8") (10'1") (9'10")
PC130-6 2750 3480 855 2110 2480 2715 400 1960 500 2460 1805 7595 2715 4.6 2.5
MIGHTY (9') (11'5") (2'10") (6'11") (8'2") (8'11") (1'4") (6'5") (20") (8'1") (5'11") (24'11") (8'11") (15'1") (8'2")
8565 2990 2.25
(28'1") (9'10") (7'5")
3170 3965 1055 2390 2490 2970 440 1990 500 2490 2090 8565 3000 5.15 2.61
PC160LC-7
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (20") (8'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
8565 2990 2.25
(28'1") (9'10") (7'5")
PC160LC-7** 3170 3965 1055 2390 2490 2970 440 1990 500 2490 2090 8565 3000 5.15 2.61
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (20") (8'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
8565 3000 2.61
3170 3965 1055 2390 2490 2970 440 1990 600 2590 2090 (28'1") (9'10") 5.15 (8'7")
PC160LC-7***
(10'5") (13'0") (3'6") (7'10") (8'2") (9'9") (1'5") (6'6") (24") (8'6") (6'10") 8565 3100 (16'11") 2.9
(28'1") (10'2") (9'6")
8565 2990 2.25
(28'1") (9'10") (7'5")
3270 4065 1055 2390 2490 2970 440 2200 600 2800 2090 8565 3000 5.15 2.61
PC180LC-7 (10'9") (13'4") (3'6") (7'10") (8'2") (9'9") (1'5") (7'3") (24") (9'2") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
8565 2990 2.25
(28'1") (9'10") (7'5")
3270 4065 1055 2390 2490 2970 440 2040 500 2540 2090 8565 3000 5.15 2.61
PC180NLC-7*5
(10'9") (13'4") (3'6") (7'10") (8'2") (9'9") (1'5") (6'8") (20") (8'4") (6'10") (28'1") (9'10") (16'11") (8'7")
8565 3100 2.9
(28'1") (10'2") (9'6")
9480 2985 1.84
(31' 1") (9'10") (6' 0")
3275 4070 1085 2750 2710 3040 440 2200 600 2800 2095 9495 3190 5.7 2.41
PC200-8
(10' 9") (13' 4") (3' 7") (9' 0") (8'11") (10' 0") (1' 5") (7' 3") (24") (9' 2") (6'10") (31' 2") (10' 6") (18' 8") (7'11")
9425 2970 2.925
(30' 11") (9' 9") (9' 7")
9425 2985 2.41
3275 4070 1085 2750 2710 3040 440 2200 800 3000 2095 (30' 11") (9'10") 5.7 (7'11")
PC200-8*
(10' 9") (13' 4") (3' 7") (9' 0") (8'11") (10' 0") (1' 5") (7' 3") (31.5") (9' 10") (6'10") 9425 2970 (18' 8") 2.925
(30' 11") (9' 9") (9' 7")
9480 2985 1.84
(3'1") (9'10") (6'0")
PC200-7 3270 4080 1085 2710 2710 3000 440 2200 600 2800 2095 9495 3190 5.7 2.41
PC200-7*4 (10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (24") (9'2") (6'10") (3'2") (10'6") (18'8") (7'11")
PC210-7*4
9425 2970 2.925
(30'11") (9'9") (9'7")
2A-33
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
9495 3190 2.41
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 (31'2") (10'6") 5.7 (7'11")
PC200-7*
(10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") 9425 2970 (18'8") 2.925
(30'11") (9'9") (9'7")
9480 2985 1.84
(3'1") (9'10") (6'0")
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 9495 3190 5.7 2.41
PC200-7*7 (10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") (3'2") (10'6") (18'8") (7'11")
9425 2970 2.925
(30'11") (9'9") (9'7")
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 9110 3280 5.2 1.9
PC200-7SEF (10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") (29'10") (10'10") (17'1") (6'6")
3270 4080 1085 2710 2710 3000 440 2200 800 3000 2095 11710 3310 8.04 6.36
PC200-7SLF (10'9") (13'5") (3'7") (8'11") (8'11") (9'10") (1'5") (7'3") (31.5") (9'10") (6'10") (38'5") (10'10") (26'4") (20'10")
9480 2985 1.84
(31'1") (9'10") (6'0")
3655 4450 1085 2750 2710 3040 440 2380 700 3080 2095 9495 3190 5.7 2.41
PC200LC-8
(12'0") (14'7") (3'7") (9'0") (8'11") (10'0") (1'5") (7'10") (28") (10'1") (6'10") (31'2") (10'6") (18'8") (7'11")
9425 2970 2.925
(30'11") (9'9") (9'7")
9425 2985 2.41
3655 4450 1085 2750 2710 3040 440 2380 800 3180 2095 (30' 11") (9'10") 5.7 (7'11")
PC200LC-8*
(12' 0") (14' 7") (3' 7") (9' 0") (8'11") (10' 0") (1' 5") (7' 10") (31.5") (10' 5") (6'10") 9425 2970 (18' 8") 2.925
(30' 11") (9' 9") (9' 7")
9480 2985 1.84
(31'1") (9'10") (6'0")
PC200LC-7 3640 4450 1085 2710 2710 3000 440 2380 700 3080 2095 9495 3190 5.7 2.41
PC200LC-7*4 (1'11") (14'7") (3'7") (8'11") (8'11") (9'10") (1'5") (7'10") (28") (10'1") (6'10") (31'2") (10'6") (18'8") (7'11")
PC210LC-7*4
9425 2970 2.925
(30'11") (9'9") (9'7")
9540 2985 1.84
(31'1") (9'10") (6'0")
PC210-8 3275 4080 1100 2800 2500 3035 440 2200 600 2800 2110 9555 3190 5.7 2.41
(10'9") (13'5") (3'7") (9'2") (8'2") (9'11") (1'5") (7'3") (24") (9'2") (6'11") (31'4") (10'6") (18'8") (7'11")
9485 2970 2.925
(31'1") (9'9") (9'7")
9540 2985 1.84
(31'1") (9'10") (6'0")
PC210LC-8 3655 4450 1100 2800 2500 3035 440 2380 600 2980 2110 9555 3190 5.7 2.41
(12'0") (14'7") (3'7") (9'2") (8'2") (9'11") (1'5") (7'10") (24") (9'9") (6'11") (31'4") (10'6") (18'8") (7'11")
9485 2970 2.925
(31'1") (9'9") (9'7")
2A-34
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
A B C D E F G H I J K M N Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in) m m
(ft.in) (ft.in)
9540 2985 1.84
(31'1") (9'10") (6'0")
PC210NLC-8 3655 4450 1100 2800 2500 3035 440 2040 500 2540 2110 9555 3190 5.7 2.41
(12'0") (14'7") (3'7") (9'2") (8'2") (9'11") (1'5") (6'8") (20") (8'4") (6'11") (31'4") (10'6") (18'8") (7'11")
9485 2970 2.925
(31'1") (9'9") (9'7")
9865 3220 2.00
(32'4") (10'7") (6'7")
PC220-8 3460 4260 1100 2940 2710 3055 440 2380 600 2980 2110 9960 3295 5.8 2.50
(11'4") (14'0") (3'7") (9'8") (8'11") (10'0") (1'5") (7'10") (24") (9'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3185 3.05
(32'5") (10'5") (10'0")
9865 3220 2.0
(32'4") (10'7") (6'7")
PC220-7 3460 4265 1100 2905 2710 3015 440 2380 600 2980 2110 9960 3295 5.85 2.5
(11'4") (14'0") (3'7") (9'6") (8'11") (9'11") (1'5") (7'10") (24") (9'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3160 3.045
(32'5") (10'4") (10'0")
9865 3220 2.00
(32'4") (10'7") (6'7")
PC220LC-8 3845 4640 1100 2940 2710 3055 440 2580 700 3280 2110 9960 3295 5.8 2.50
(12'7") (15'3") (3'7") (9'8") (8'11") (10'0") (1'5") (8'6") (28") (10'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3185 3.05
(32'5") (10'5") (10'0")
9885 3185 3.05
3845 4640 1100 2940 2710 3055 440 2580 800 3380 2110 (32'5") (10'5") 5.8 (10'0")
PC220LC-8*
(12'7") (15'3") (3'7") (9'8") (8'11") (10'0") (1'5") (8'6") (31.5") (11'1") (6'11") 9910 3270 (19'2") 3.05
(32'6") (10'9") (11'6")
9865 3220 2.0
(32'4") (10'7") (6'7")
PC220LC-7 3845 4640 1100 2905 2710 3015 440 2580 700 3280 2110 9960 3295 5.85 2.5
(12'7") (15'3") (3'7") (9'6") (8'11") (9'11") (1'5") (8'6") (28") (10'9") (6'11") (32'8") (10'10") (19'2") (8'2")
9885 3160 3.045
(32'4") (10'4") (10'0")
PC228US-3E0 3275 4070 1060 1680 2980 3010 440 2200 600 2800 2285 8700 2980 5.7 2.9
(10'9") (13'4") (3'6") (5'6") (9'9") (9'11") (1'5") (7'3") (24") (9'2") (7'6") (28'7") (9'9") (18'8") (9'6")
PC228US-3 3270 4080 1060 1680 2980 3010 440 2200 600 2800 2285 8700 2980 5.7 2.9
(10'9") (13'5") (3'6") (5'6") (9'9") (9'11") (1'5") (7'3") (24") (9'2") (7'6") (28'7") (9'9") (18'8") (9'6")
3640
PC228USLC-3E0 (11'11") 4450 1060 1680 2980 3010 440 2380 700 3080 2285 8890 2980 5.7 2.9
(14'7") (3'6") (5'6") (9'9") (9'11") (1'5") (7'10") (28") (10'1") (7'6") (29'2") (9'9") (18'8") (9'6")
3640
PC228USLC-3 (11'11") 4450 1060 1680 2980 3010 440 2380 700 3080 2285 8890 2980 5.7 2.9
(14'7") (3'6") (5'6") (9'9") (9'11") (1'5") (7'10") (28") (10'1") (7'6") (29'2") (9'9") (18'8") (9'6")
3640
PC228USLC-3** (11'11") 4450 1060 1680 2980 3010 440 2380 700 3080 2285 9285 2.9
(14'7") (3'6") (5'6") (9'9") (9'11") (1'5") (7'10") (28") (10'1") (7'6") (30'6") (9'6")
9540 2985 1.8
(31'4") (9'10") (5'11")
3460 4305 1125 2800 2500 3060 465 1990 550 2540 2135 9555 3190 5.7 2.4
PC230NHD-8
(11'4") (14'1") (3'8") (9'2") (8'2") (10'0") (1'6") (6'6") (22") (8'4") (7'0") (31'4") (10'6") (18'8") (7'10")
9485 2970 2.9
(31'1") (9'9") (9'6")
9865 3220 2.00
(32'4") (10'7") (6'7")
9960 3295 2.5
3845 4640 1100 2940 2710 3055 440 2580 700 3280 2110 (32'8") (10'10") 5.8 (8'2")
PC240LC-8
(12'7") (15'3") (3'7") (9'8") (8'11") (10'0") (1'5") (8'6") (28") (10'9") (6'11") 9885 3160 (19'2") 3.05
(32'5") (10'4") (10'0")
9910 3270 3.5
(12'6") (10'9") (11'6")
2A-35
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
9865 3220 2.00
(32'4") (10'7") (6'7")
9960 3295 2.5
3845 4640 1100 2940 2710 3055 440 2380 600 2980 2110 (32'8") (10'10") 5.8 (8'2")
PC240NLC-8 (12'7") (15'3") (3'7") (9'8") (8'11") (10'0") (1'5") (7'10") (24") (9'9") (6'11") 9885 (19'2")
3160 3.05
(32'5") (10'4") (10'0")
9910 3270 3.5
(12'6") (10'9") (11'6")
9940 3310 2.50
(32'7") (10'10") (8'2")
3700 4625 1215 2940 2710 3175 498 2590 600 3190 2225 9860 3200 5.9 3.05
PC270-8 (12'2") (15'2") (4'0") (9'8") (8'11") (10'5") (1'8") (8'6") (24") (10'6") (7'4") (32'4") (10'6") (19'2") (10'0")
9890 3280 3.5
(32'5") (10'9") (11'6")
9940 3320 2.50
(32'7") (10'11) (8'2")
3700 4625 1186 2940 2710 3100 498 2590 600 3190 2200 9790 3210 5.8 3.05
PC270-7 (12'2") (15'2") (3'11") (9'8") (8'11") (10'2") (1'8") (8'6") (24") (10'6") (7'3") (32'1") (10'6") (19'2") (10'0")
9890 3280 3.5
(32'5") (10'9") (11'6")
9860 3210 3.05
4030 4955 1215 2940 2710 3175 498 2590 800 3390 2225 (32'4") (10'6") 5.8 (10'0")
PC270LC-8
(13'3") (16'3") (4'0") (9'8") (8'11") (10'5") (1'8") (8'6") (31.5") (11'2") (7'4") 9890 3280 (19'2") 3.5
(32'5") (10'9") (11'6")
9890 3200 2.00
(32'5") (10'6") (6'7")
10010 3320 2.5
PC290LC-8 4030 4955 1215 2940 2710 3180 498 2590 700 3290 2575 (32'10") (10'11") 5.8 (8'2")
(13'3") (16'3") (4'0") (9'8") (8'11") (10'5") (1'8") (8'6") (28") (10'10") (8'5") 9860 3210 (19'2") 3.05
(32'4") (19'6") (10'0")
9960 3280 3.5
(32'8") (10'9") (11'6")
9890 3200 2.00
(32'5") (10'6") (6'7")
10010 3320 2.5
4030 4955 1215 2940 2710 3180 498 2390 600 2990 2575 (32'10") (10'11") 5.8 (8'2")
PC290NLC-8
(13'3") (16'3") (4'0") (9'8") (8'11") (10'5") (1'8") (7'10") (24") (9'10") (8'5") 9860 3210 (19'2") 3.05
(32'4") (19'6") (10'0")
9960 3280 3.5
(32'8") (10'9") (11'6")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
3700 4625 1185 3450 2995 3130 500 2590 600 3190 2580 (36'8") (11'2") 6.5 (8'4")
PC300-7E0
(12'2") (15'2") (3'11") (11'4") (9'10") (10'3") (1'8") (8'6") (24") (10'6") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
3700 4625 1185 3405 2995 3130 500 2590 600 3190 2580** (36'8") (11'2") 6.47 (8'4")
PC300-7
(12'2") (15'2") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (24") (10'6") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11290 3400 2.2
(37'1") (11'2") (7'3")
11180 3410 2.55
PC300-7*4 3700 4625 1185 3405 2995 3130 500 2590 600 3190 2580** (36'8") (11'2") 6.47 (8'4")
PC360-7*4 (12'2") (15'2") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (24") (10'6") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
2A-36
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
3700 4625 800 3390 11290 3400 2.2
(12'2") (15'2") 1185 3405 2995 3130 500 2590 (31'5") (11'3") (37'7")
2580** (11'2") 6.47 (7'3")
PC300SE-7
4030 4955 (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") 600 3190 (8'6")
11140 3280 (21'3") 3.185
(13'3") (16'3") (24") (10'6") (36'7") (10'9") (10'5")
11130 3244 2.54
(36'6") (10'8") (8'4")
4350 5355 1320 3450 2995 3200 550 2740 800 3540 2688 11170 3421 6.5 3.185
PC300HD-7E0
(14'3") (17'7") (4'4") (11'4") (9'10") (10'6") (1'10") (9'0") (31.5") (11'7") (8'10") (36'8") (11'3") (21'3") (10'5")
11230 3690 4.02
(36'10") (12'1") (13'2")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
4030 4955 1185 3450 2995 3130 500 2590 700 3290 2580 (36'8") (11'2") (8'4")
PC300LC-7E0
(13'3") (16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (8'6") (28") (10'10") (8'6") 11140 3280 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
4030 4955 1185 3405 2995 3130 500 2590 700 3290 2580** (36'8") (11'2") 6.47 (8'4")
PC300LC-7
(13'3") (16'3") (3'11") (11'2") (9'10") (10'3") (1'8") (8'6") (24") (10'10") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11180 3410 2.54
(36'8") (11'2") (8'4")
4030 4955 1185 3450 2995 3130 500 2590 800 3390 2590 11140 3280 6.5 3.185
PC300LC-7E0* (13'3")
(16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (8'6") (31.5") (11'2") (8'6") (36'7") (10'9") (21'3") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
9545 3210 3.045
(31'4") (10'6") (10'0")
PC308USLC- 4030 4955 1185 1830 3080 3140 498 2740 850 3590 2545 9570 3280 5.85 3.5
3E0 (13'2") (16'3") (3'10") (6'0") (10'1") (10'4") (1'8") (8'11") (33'5") (11'9") (8'4") (31'4") (10'9") (19'2") (11'6")
9500 3800 4.2
(31'2") (12'6") (13'9")
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
PC340LC- 4030 4955 1186 3450 2995 3130 498 2590 700 3290 2580 (36'8") (11'2") 6.5 (8'4")
7E0*5 (13'3") (16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (8'6") (28") (10'10") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11275 3640 2.22
(37'0") (11'11") (7'3")
11215 3615 2.55
PC340LC- 4030 4955 1186 3450 2995 3130 498 2590 700 3290 2580 (36'10") (11'10") 6.5 (8'4")
7E0*6 (13'3") (16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (8'6") (28") (10'10") (8'6") 11145 3710 (21'3") 3.185
(36''7") (12'2") (10'5")
10930 4160 4.02
(35'10") (13'8") (13'2")
2A-37
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
11290 3400 2.22
(37'1") (11'2") (7'3")
11180 3410 2.55
PC340NLC- 4030 4955 1186 3450 2995 3130 498 2390 600 2990 2580 (36'8") (11'2") 6.5 (8'4")
7E0*5 (13'3") (16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (7'10") (24") (9'10") (8'6") 11140 3280 (21'3") 3.185
(36'7") (10'9") (10'5")
11170 3760 4.02
(36'8") (12'4") (13'2")
11275 3640 2.22
(37'0") (11'11") (7'3")
11215 3615 2.55
PC340NLC- 4030 4955 1186 3450 2995 3130 498 2390 600 3290 2580 (36'10") (11'10") 6.5 (8'4")
7E0*6 (13'3") (16'3") (3'11") (11'4") (9'10") (10'3") (1'8") (7'10") (24") (10'10") (8'6") 11145 3710 (21'3") 3.185
(36''7") (12'2") (10'5")
10930 4160 4.02
(35'10") (13'8") (13'2")
3700 4625 1185 3450 3145 3130 500 2590 600 3190 2580 11140 3280 6.5 3.185
PC350-7E0
(12'2") (15'2") (3'11") (11'4") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
3700 4625 1185 3405 3145 3130 500 2590 600 3190 2580** 11140 3280 6.47 3.185
PC350-7
(12'2") (15'2") (3'11") (11'2") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
4030 4955 1185 3450 3145 3130 500 2590 600 3190 2580 11140 3280 6.5 3.185
PC350LC-7E0
(13'3") (16'3") (3'11") (11'4") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
4030 4955 1185 3405 3145 3130 500 2590 600 3190 2580** 11140 3280 6.47 3.185
PC350LC-7
(13'3") (16'3") (3'11") (11'2") (10'4") (10'3") (1'8") (8'6") (24") (10'6") (8'6") (36'7") (10'9") (21'3") (10'5")
11290 3400 2.2
(37'1") (11'2") (7'3")
3570 11180 3410 2.55
4350 5356 1320 3405 2995 3265 706 2870 700 (11'9") 2715 (36'8") (11'2") 6.47 (8'4")
PC380LC-7
(14'3") (17'7") (4'3") (11'2") (9'9") (10'5") (2'4") (9'5") (28") 3072*5 (8'11") 11140 3280 (21'3") 3.19
(10'1") (36'7") (10'8") (10'6")
11170 3760 4.02
(36'8") (12'4") (13'2")
11905 3850 2.4
(39'1") (12'8") (7'10)
11995 3745 2.9
4020 5025 1320 3645 2995 3265 555 2740 600 3340 2885 (39'4") (12'3") 7.1 (9'6")
PC400-7E0 (13'2") (16'6") (4'4") (12'0") (9'10") (10'9") (1'10") (9'0") (24") (11'0") (9'6") (23'2")
11940 3635 3.38
(39'2") (11'11") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11905 3850 2.4
(39'1") (12'8") (7'10")
11995 3745 2.9
4020 5025 1320 3605 2995 3265 555 2740 600 3340 2715 (39'4") (12'3") 7.06 (9'6")
PC400-7
(13'2") (16'6") (4'4") (11'10") (9'10") (10'9") (1'10") (9') (24") (11') (8'11") 11940 3635 (23'2") 3.38
(39'2") (11'11") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11915 3715 2.4
(39'1") (12'2") (7'10")
11885 3730 2.9
(39') (12'3") (9'6")
4020 5025 1320 3500 2995 3265 555 2740 600 3340 2365 11835 3635 7.06 3.38
PC400-6*4 (13'2") (16'6") (4'4") (11'6") (9'10") (10'9") (1'10") (9') (24") (11') (7'9") (38'10") (11'11") (23'2") (11'1")
11850 3795 4.0
(38'11") (12'5") (13'1")
11685 4385 4.8
(38'4") (14'5") (15'9")
2A-38
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
11905 3850 2.4
(39'1") (12'8") (7'10)
11995 3745 2.9
4350 5355 1320 3645 2995 3265 550 2740 700 3440 2885 (39'4") (12'3") 7.1 (9'6")
PC400LC-7E0 (14'3") (17'7") (4'4") (12'0") (9'10") (10'9") (1'10") (9'0") (28") (11'3") (9'6") (23'2")
11940 3635 3.38
(39'2") (11'11") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11905 3850 2.4
(39'1") (12'8") (7'10")
11995 3745 2.9
4350 5355 1320 3605 2995 3265 550 2740 700 3440 2715 (39'4") (12'3") 7.06 (9'6")
PC400LC-7
(14'3") (17'7") (4'4") (11'10") (9'10") (10'9") (1'10") (9') (28") (11'3") (8'11") 11940 3635 (23'2") 3.38
(39'2") (11'11") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11905 3850 2.4
(39'1") (12'8") (7'10)
11995 3745 2.9
(39'4") (12'3") (9'6")
4350 5355 1320 3645 2995 3265 550 2740 700 3440 2885 11940 3635 7.1 3.38
PC400LC-7E0* (14'3")
(17'7") (4'4") (12'0") (9'10") (10'9") (1'10") (9'0") (28") (11'3") (9'6") (39'2") (11'11") (23'2") (11'1")
11950 3885 4
(39'2") (12'9") (13'1")
11830 4435 4.8
(38'10") (14'7") (15'9")
4350 5355 1320 3605 2995 3265 550 2740 800 3540 2715 11905 3850 7.06 2.4
PC400LCSE-7 (14'3") (17'7") (4'4") (11'10") (9'10") (10'9") (1'10") (9') (32") (11'7") (8'11") (39'1") (12'8") (23'2") (7'10")
4020 5025 1320 3645 3145 3265 555 2740 600 3340 2885 12040 3660 7.1 3380
PC450-7E0
(13'2") (16'6") (4'4") (12'0") (10'4") (10'9") (1'10) (9'0") (23'6") (11'0") (9'6") (39'6") (12'0") (23'2") (11'1")
4020 5025 1320 3605 3145 3265 555 2740 600 3340 2715*4 12040 3660 7.06 3.38
PC450-7
(13'2") (16'6") (4'4") (11'10") (10'4") (10'9") (1'10") (9') (24") (11') (8'11") (39'6") (12'0") (23'2") (11'1")
11905 3850 2.4
(39'1") (12'8") (7'10)
11995 3745 2.9
(39'4") (12'3") (9'6")
4020 5055 1320 3605 2995 3265 685 2890 600 3490 12040 3660 7.1 3.38
PC450-7E0**
(13'2") (16'7") (4'4") (11'10") (9'10") (10'9") (2'3") (9'6") (24") (11'5") (39'6") (12'0") (23'2") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11795 4435 4.8
(38'8") (14'7") (15'9")
4350 5355 1320 3645 3145 3265 550 2740 600 3340 2885 12040 3660 7.1 3380
PC450LC-7E0 (14'3") (17'7") (4'4") (12'0") (10'4") (10'9") (1'10) (9'0") (23'6") (11'0") (9'6") (39'6") (12'0") (23'2") (11'1")
11905 3850 2.4
(39'1") (12'8") (7'10)
11995 3745 2.9
(39'4") (12'3") (9'6")
4350 5355 1320 3605 2995 3265 685 2890 600 3490 12040 3660 7.1 3.38
PC450LC-7E0**
(14'3") (17'7") (4'4") (11'10") (9'10") (10'9") (2'3") (9'6") (24") (11'5") (39'6") (12'0") (23'2") (11'1")
11950 3885 4.0
(39'2") (12'9") (13'1")
11795 4435 4.8
(38'8") (14'7") (15'9")
11530 3570 2.4
4350 5355 1320 3605 2995 3265 685 2890 600 3490 (37'10") (11'9") 6.67 (7'10)
PC450LC-7E0 HD
(14'3") (17'7") (4'4") (11'10") (9'10") (10'9") (2'3") (9'6") (24") (11'5") 11590 3720 (21'11") 2.9
(38'0") (12'2") (9'6")
4350 5355 1320 3605 3145 3265 550 2740 600 3340 2715*4 12040 3660 7.06 3.38
PC450LC-7 (14'3") (16'6") (4'4") (11'10") (9'10") (10'9") (1'10") (9') (24") (11') (8'11") (39'6") (12'0") (23'2") (11'1")
2A-39
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
12910 4300 3.5
(42'4") (14'1") (11'6")
12830 4655 4.3
2590*5 (42'1") (15'3") (14'1")
(8'6")
4250 5340 1365 3900 3195 3280 780 600 3900 3435 12535 5235 7.66 5.2
PC600-8 (13'11") (17'6") (4'6") (12'10") (10'6") (10'9") (2'7") (24") (12'10") (11'3") (41'2") (17 '2") (25'2") (17'1")
3300
(10'10") 12540 4280 3.5
(41'2") (14'1") (11'6")
11930 4600 2.9
(39'2") (15'1") (9'6")
2590*5 12440 4280 7.3 3.5
4250 5340 1365 3800 3195 3290 780 (8'6") 600 3900 3435 (40'10") (14'1") (23'11") (11'6")
PC600-8**
(13'11") (17'6") (4'6") (12'6") (10'6") (10'10") (2'7") 3300 (24") (12'10") (11'3") 11830 4600 6.6 2.9
(10'10") (38'10") (15'1") (21'8") (9'6")
11830 4600 6.6 2.9
(38'10") (15'1") (21'8") (9'6")
12440 4280 7.3 3.5
2590*5 (40'10") (14'1") (23'11") (11'6")
(8'6")
4250 5340 1365 3675 3195 3290 780 600 3900 3070*4 12810 4300 3.5
PC600-7
(13'11") (17'6") (4'6") (12'1") (10'6") (10'10") (2'7") 3300 (23.6") (12'10") (10'1")
(42'0") (14'1") (11'6")
(10'10") 12730 4655 7.66 4.3
(41'9") (15'3") (25'2") (14'1")
12435 5235 5.2
(40'10") (17'2") (17'1")
12910 4300 3.5
(42'4") (14'1") (11'6")
12830 4655 4.3
2590*5 (42'1") (15'3") (14'1")
(8'6")
4600 5690 1365 3900 3195 3280 780 600 3900 3435 12535 5235 7.66 5.2
PC600LC-8
(15'1") (18'8") (4'6") (12'10") (10'6") (10'9") (2'7") 3300 (24") (12'10") (11'3") (41'2") (17 '2") (25'2") (17'1")
(10'10") 12540 4280 3.5
(41'2") (14'1") (11'6")
11930 4600 2.9
(39'2") (15'1") (9'6")
4600 5690 1365 3800 3195 3290 780 2590 600 3900 3435 12810 4300 7.66 3.5
PC600LC-8**
(15'1") (18'8") (4'6") (12'6") (10'6") (10'10") (2'7") (8'6") (24") (12'10") (11'3") (42'0") (14'1") (25'2") (11'6")
11830 4600 6.6 2.9
(38'10") (15'1") (21'8") (9'6")
12440 4280 7.3 3.5
2590*5 (40'10") (14'1") (23'11") (11'6")
(8'6")
4600 5690 1365 3675 3195 3290 780 600 3900 3070*4 12810 4300 3.5
PC600LC-7 (15'1") (18'8") (4'6") (12'1") (10'6") (10'10") (2'7") 3300 (23.6") (12'10") (10'1")
(42'0") (14'1") (11'6")
(10'10") 12730 4655 7.66 4.3
(41'9") (15'3") (25'2") (14'1")
12435 5235 5.2
(40'10") (17'2") (17'1")
14405 4690 3.6
(47'3") (15'5") (11'10")
4500 5810 1560 4345 3195 3560 840 3500 610 4110 3670 14435 5630 8.2 4.6
PC800-8
(14'9") (19'1") (5'1") (14'3") (10'6") (11'8") (2'9") (11'6") (24") (13'6") (12') (47'4") (18'6") (26'11") (15'1")
14115 6260 5.6
(46'4") (20'6") (18'4")
13995 4850 8.0 3.6
4500 5810 1560 4400 3265 3720 840 3500 610 4110 3665 (45'1") (15'1") (26'3") (11'10")
PC800-8**
(14'9") (19'1") (5'1") (14'5") (10'9") (12'2") (2'7") (11'6") (24") (13'6") (12'3") 13130 4615 7.1 2.9
(43'9") (15'2) (23'4") (9'6")
14305 4660 3.6
4110 (46'11") (15'3") (11'10")
(12'10") 3445*5
4500 5810 1560 4245 3195 3560 840 3500 610 13955 5970 8.2 4.6
PC750-7
(14'9") (19'1") (5'1") (13'11") (10'6") (11'8") (2'9") (11'6") (24") (11'4") (45'9") (19'7") (26'11") (15'1")
3390*4
(11'1") 13530 6560 5.6
(44'5") (21'6") (18'4")
2A-40
Dimensions EXCAVATORS
(BACKHOE)
E M
D
F N
K
C
G G.L.
I
H A
J B FVBH0313
Boom Arm
A B C D E F G H I J K M N
length length
mm mm mm mm mm mm mm mm mm mm mm mm mm
m m
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) (ft.in)
(ft.in) (ft.in)
13995 4850 3.6
5020 6327 1560 4400 3265 3720 840 3500 710 4210 3665 (45'1") (15'1") 8.0 (11'10")
PC800LC-8**
(16'6") (20'9") (5'1") (14'5") (10'9") (12'2") (2'9") (11'6") (2'4") (14'0") (12'3") 13130 4615 (26'3") 2.9
(43'9") (15'2) (9'6")
14405 4690 3.6
(47'3") (15'5") (11'10")
14435 5630 8.2 4.6
(47'4") (18'6") (26'11") (15'1")
14115 6260 5.6
5020 6330 1560 4400 3195 3565 840 3500 810 4310 3670 (46'4") (20'6") (18'4")
PC800LC-8***
(16'6") (20'9") (5'1") (14'5") (10'6") (11'8") (2'9") (11'6") (32") (13'6") (12'0") 16150 5640 4.6
(53'0") (18'6") 10.0 (15'1")
15895 6080 (32'10") 5.6
(52'2") (20'0") (18'4")
13130 4615 7.1 2.95
(43'1") (15'2") (23'4") (9'8")
4500 5810 1560 4345 3195 3560 840 3500 610 4110 3670 13130 4615 7.1 2.9
PC800SE-8 (14'9") (19'1") (5'1") (14'3") (10'6") (11'8") (2'9") (11'6") (24") (13'6") (12') (43'1") (15'2") (23'4") (9'8")
4110
PC750SE-7 4500 5810 1560 4245 3195 3640 840 3500 610 (13'6") 3445*5 13030 4615 7.1 2.9
PC800SE-7 (14'9") (19'1") (5'1") (13'11") (10'6") (11'11") (2'9") (11'6") (24") 3390*4 (11'4") (42'9") (15'2") (23'4") (9'8")
(11'1")
4500 5810 1560 4345 3195 3560 840 3500 610 4110 3670 13995 4850 8.04 3.6
PC850-8
(14'9") (19'1") (5'1") (14'3") (10'6") (11'8") (2'9") (11'6") (24") (13'6") (12') (45'11") (15'11") (26'5") (11'11")
4500 5810 1560 4345 3195 3560 840 3500 610 4110 3670 13130 4615 7.1 2.945
PC850SE-8
(14'9") (19'1") (5'1") (14'3") (10'6") (11'8") (2'9") (11'6") (24") (13'6") (12') (43'1") (15'2") (23'4") (9'8")
16020 6040 3.4
4600 (52'7") (19'10") (11'2")
4995 6425 1790 4810 3470 4120 990 3900 700 (15'1") 4075 16050 6460 9.1 4.5
PC1250-8 (16'5") (21'1") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (28") 4965*** (13'4") (52'8") (21'2") (29'10") (14'9")
(16'3") 15840 6990 5.7
(52'0") (22'11") (18'8")
16020 6040 3.4
4600 (52'7") (19'10") (11'2")
4995 6425 1790 4810 3470 4120 990 3900 700 (15'1") 3925 16050 6500 9.1 4.5
PC1250-7 (16'5") (21'1") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (28") 4965*** (12'11") (52'8") (21'4") (29'10") (14'9")
(16'3") 15840 6990 5.7
(52'0") (22'11") (18'8")
16020 6040 3.4
4900 (52'7") (19'10") (11'2")
5970 7400 1790 4810 3470 4120 990 3900 1000 (16'1") 4075 16050 6460 9.1 4.5
PC1250LC-8 (19'7") (24'3") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (39") 5265*** (13'4") (52'8") (21'2") (29'10") (14'9")
(17'3") 15840 6990 5.7
(52'0") (22'11") (18'8")
16020 6040 3.4
4900 (52'7") (19'10") (11'2")
5970 7400 1790 4810 3470 4120 990 3900 1000 (16'1") 3925 16050 6500 9.1 4.5
PC1250LC-7
(19'7") (24'3") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (39") 5265*** (12'11") (52'8") (21'4") (29'10") (14'9")
(17'3") 15840 6990 5.7
(52'0") (22'11") (18'8")
4600
4995 6425 1790 4810 3470 4120 990 3900 700 (15'1") 4075 14790 6265 7.8 3.4
PC1250SP-8
(16'5") (21'1") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (28") 4965*** (13'4") (48'6") (20'7") (25'7") (11'2")
(16'3")
4600
4995 6425 1790 4810 3470 4120 990 3900 700 (15'1") 3925 14790 6265 7.8 3.4
PC1250SP-7
(16'5") (21'1") (5'11") (15'9") (11'5") (13'6") (3'3") (12'9") (28") 4965*** (12'11") (48'6") (20'7") (25'7") (11'2")
(16'3")
17185 6745 8.7 3.9
(56'5") (22'2") (28'7") (12'10")
5780 7445 2080 6140 5055 6510 730 4600 810 5410 4535 17471 6850 9.1 4.1
PC1800-6
(19') (24'5") (6'10") (20'2") (16'7") (21'4") (2'5") (15'1") (32") (17'9") (14'11") (57'4") (22'6") (29'10") (13'5")
19400 7705 11.4 5.0
(63'8") (25'3") (37'5") (16'5")
2A-41
Dimensions EXCAVATORS
(BACKHOE)
L M
E D
N
F
K
C
G G.L
I A
H B FVBH0251
J
A B C D E F G H I J K L M N Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
6000 7910 2710 5950 5990 7485 920 4800 800 5600 5280 6780 16100 9200 8.6 4.0
PC3000-6 (19'8") (25'11") (8'11") (19'6") (19'8") (24'7") (3'0") (15'9") (31.5") (18'4") (17'4") (22'3") (52'10") (30'2") (28'3") (13'1")
6425 8375 2942 6090 7067 8260 980 5350 1200 6550 6027 7650 18000 10000 9.75 4.5
PC4000-6 (21'1") (27'6") (9'8") (20'0") (23'2") (27'1") (3'3") (17'7") (47") (21'7") (19'9") (25'1") (59'1") (32'10") (32'0") (14'9")
7425 9720 3240 7260 7270 8535 995 6190 1350 7150 6340 7725 20300 11000 10.8 5.1
PC5500-6 (24'4") (31'11") (10'8") (23'10") (23'10") (28'0") (3'3") (20'4") (53") (23'6") (20'10") (25'4") (66'7") (36'1") (35'5") (16'9")
7945 10580 3470 8410 8300 9500 1144 6650 1500 8150 7030 9070 22900 12800 11.5 5.5
PC8000-6 (26'0") (34'9") (11'5") (27'7") (27'3") (31'2") (3'9") (21'10") (59") (26'9") (23'1") (29'9") (75'2") (42'0") (37'9") (18'1")
2A-42
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
D F
C G
FVBH0016
* ISO rating
** Italy source
*** China source
2A-43
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
D F
C G
FVBH0016
* ISO rating
** Italy source
*** China source
2A-44
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-45
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-46
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-47
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
* Using power max. function, except PC75R-2, *5 For USA *10 With two piece boom
PC95R-2 models, SAE rating *6 USA source
** Optional bucket cylinder is required *7 China source
3
* ISO rating *8 Indonesia source
*4 UK source *9 With one piece boom
2A-48
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-49
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-50
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
2A-51
Working Ranges EXCAVATORS
and Digging Forces (BACKHOE)
A
B
8 ft FVBH0360
* DIN rating
2A-52
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
Base machine Boom with arm cylinder Arm with bucket cylinder
B A
Boom cylinder
A B
A
FVBH0173
Model
PC200-8 PC200-7 PC220-8 PC220-7
Item
STD 15920 (35,100) 15720 (34,660) 18410 (40,590) 18250 (40,230)
Basic machine Weight LC kg (lb) 17320 (38,180) 17120 (37,740) 19840 (43,740) 19680 (43,390)
NLC — — — —
A mm (ft.in) 5900 (19'4") 5900 (19'4") 6045 (19'10") 6045 (19'10")
Boom with arm
B mm (ft.in) 1530 (5'0") 1530 (5'0") 1615 (5'4") 1615 (5'4")
cylinder
Weight kg (lb) 1410 (3,130) 1410 (3,130) 1830 (4,030) 1830 (4,030)
Arm size m (ft.in) 1.84 (6'0") 1.84 (6'0") 2.0 (6'7") 2.0 (6'7")
A mm (ft.in) 2775 (9'1") 2775 (9'1") 3065 (10'1") 3065 (10'1")
B mm (ft.in) 875 (2'10") 875 (2'10") 975 (3'2") 975 (3'2")
Weight kg (lb) 911 (2,010) 911 (2,010) 1205 (2,660) 1205 (2,660)
Arm size m (ft.in) 2.41 (7'11") 2.41 (7'11") 2.5 (8'2") 2.5 (8'2")
A mm (ft.in) 3430 (11'3") 3430 (11'3") 3625 (11'11") 3625 (11'11")
B mm (ft.in) 890 (2'11") 890 (2'11") 925 (3'0") 925 (3'0")
Arm with bucket Weight kg (lb) 930 (2,050) 930 (2,050) 1235 (2,720) 1235 (2,720)
cylinder and linkage Arm size m (ft.in) 2.93 (9'7") 2.93 (9'7") 3.05 (10'0") 3.05 (10'0")
A mm (ft.in) 3925 (12'11") 3925 (12'11") 4135 (13'7") 4135 (13'7")
B mm (ft.in) 770 (2'6") 770 (2'6") 815 (2'8") 815 (2'8")
Weight kg (lb) 955 (2,110) 955 (2,110) 1215 (2,680) 1215 (2,680)
Arm size m (ft.in) — — — —
A mm (ft.in) — — — —
B mm (ft.in) — — — —
Weight kg (lb) — — — —
2015 (6'7") 2015 (6'7")
A mm (ft.in) 2005 (6'7") 2005 (6'7")
Boom cylinder 340 (1'1")** 340 (1'1")**
B mm (ft.in) 337 (743)** 337 (743)**
(Total weight) 200 × 2 (440 × 200 × 2 (440 ×
Weight kg (lb)
2) 2)
Backhoe bucket See bucket arm combination
2A-53
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
Base machine Boom with arm cylinder Arm with bucket cylinder
B A
Boom cylinder
A B
A
FVBH0173
Model
PC400-7E0 PC400-7 PC450-7E0* PC450-7
Item
STD 33360 (73,550) 33160 (73,100) 33920 (74,780) 33620 (74,120)
Basic machine Weight LC kg (lb) 34900 (76,940) 34810 (76,740) 34620 (76,320) 34620 (76,320)
NLC — — — —
A mm (ft.in) 7290 (23'11") 7290 (23'11") 7290 (23'11") 7290 (23'11")
Boom with arm
B mm (ft.in) 1695 (5'7") 1695 (5'7") 1615 (5'4") 1695 (5'7")
cylinder
Weight kg (lb) 4000 (8,820) 4000 (8,820) 3810 (8,400) 4200 (9,260)
Arm size m (ft.in) 2.4 (7'10") 2.4 (7'10") 2.4 (7'10") 3.38 (11'1")
A mm (ft.in) 3705 (12'2") 3705 (12'2") 3702 (12'2") 4705 (15'5")
B mm (ft.in) 1080 (3'7") 1080 (3'7") 1078 (3'6") 1055 (3'6")
Weight kg (lb) 2030 (4,480) 2030 (4,480) 2030 (4,480) 2400 (5,290)
Arm size m (ft.in) 2.9 (9'6") 2.9 (9'6") 2.9 (9'6") —
A mm (ft.in) 4215 (13'10") 4215 (13'10") 4210 (13'10") —
B mm (ft.in) 995 (3'4") 995 (3'4") 994 (3'4") —
Weight kg (lb) 2150 (4,740) 2150 (4,740) 2140 (4,720) —
Arm size m (ft.in) 3.38 (11'1") 3.38 (11'1") 3.38 (11'1") —
Arm with bucket A mm (ft.in) 4615 (15'2") 4615 (15'2") 4600 (15'1") —
cylinder and linkage B mm (ft.in) 975 (3'2") 975 (3'2") 975 (3'2") —
Weight kg (lb) 2200 (4,850) 2200 (4,850) 2120 (4,670) —
Arm size m (ft.in) 4.0 (13'1") 4.0 (13'1") 4.0 (13'1") —
A mm (ft.in) 5235 (17'2") 5235 (17'2") 5234 (17'2") —
B mm (ft.in) 965 (3'2") 965 (3'2") 963 (3'2") —
Weight kg (lb) 2440 (5,380) 2440 (5,380) 2460 (5,420) —
A m (ft.in) — — 4.8 (15'9") —
mm (ft.in) — — 6036 (19'10") —
B
mm (ft.in) — — 1041 (3'5") —
Weight kg (lb) — — 2580 (5,690) —
A mm (ft.in) 2445 (8'1") 2445 (8'1") 2445 (8'1") 2445 (8'1")
Boom cylinder
B mm (ft.in) 225 (8.9") 225 (8.9") 237 (9.3") 225 (8.9")
(Total weight) Weight kg (lb) 400 × 2 (880 × 2) 400 × 2 (880 × 2) 390 × 2 (860 × 2) 400 × 2 (880 × 2)
Backhoe bucket See bucket arm combination
Model
Item PC450-7E0
STD 33920 (74,780)
Basic machine Weight LC kg (lb) 34920 (76,980)
NLC —
A mm (ft.in) 7290 (23'11")
Boom with arm
cylinder B mm (ft.in) 1695 (5'7")
Weight kg (lb) 4200 (9,260)
Arm size m (ft.in) 3.38 (11'1")
A mm (ft.in) 4705 (15'5")
B mm (ft.in) 1055 (3'6")
Weight kg (lb) 2400 (5,290)
Arm size m (ft.in) —
A mm (ft.in) —
B mm (ft.in) —
Weight kg (lb) —
Arm size m (ft.in) —
Arm with bucket A mm (ft.in) —
cylinder and linkage B mm (ft.in) —
Weight kg (lb) —
Arm size m (ft.in) —
A mm (ft.in) —
B mm (ft.in) —
Weight kg (lb) —
A m (ft.in) —
mm (ft.in) —
B
mm (ft.in) —
Weight kg (lb) —
Boom cylinder A mm (ft.in) 2445 (8'1")
(Total weight) B mm (ft.in) 225 (8.9")
Weight kg (lb) 400 × 2 (880 × 2)
Backhoe bucket See bucket arm combination
* UK source
** With piping
2A-54
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC600 / 600LC-8
Four-part transportation
(1) Work equipment assembly (3) Undercarriage
875 (2'10")
(4'2")
1260
Boom
Arm
FVPM3163
(4) Others
")
2'7
Bucket Boom & arm cylinder 0(
78 31
95
(10
'6"
)
1330 (4'4")
FVPM3164
19 ")
Three-part transportation
(1) Work equipment assembly (3) Others
2A-55
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC600/600LC-8
Specification Table for Transportation
No. of Part for PC600-8 PC600-8
Item Related Specifications PC600-8 PC600LC-8
Transportation (Quarry spec.) (SE spec.)
Overall
mm (fi.in) 7920 (26'0") 7530 (24'8") 7920 (26'0") 6870 (22'6")
length
Overall
mm (fi.in) 1190 (3'11") 1190 (3'11") 1190 (3'11") 1190 (3'11")
Boom width
Overall
mm (fi.in) 2040 (6'8") 1960 (6'5") 2040 (6'8") 2090 (6'10")
height
Weight ton (US. ton) 4.8 (5.3) 4.7 (5.2) 4.8 (5.3) 4.7 (5.0)
Overall
mm (fi.in) 4870 (16'0") 4870 (16'0") 4870 (16'0") 4230 (13'11")
length
Overall
mm (fi.in) 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7")
width
Work Equipment
Arm
Overall
mm (fi.in) 1210 (4'0") 1240 (4'1") 1210 (4'0") 1430 (4'8")
height
(1)
ton (US.
Weight 3.3 (3.6) 3.3 (3.6) 3.3 (3.6) 3.4 (3.7)
ton)
Overall
mm (fi.in) 2150 (7'1") 2150 (7'1") 2150 (7'1") 2260 (7'5")
length
Overall
mm (fi.in) 1780 (5'10") 1920 (6'4") 1780 (5'10") 2120 (6'11")
Bucket width
Overall
mm (fi.in) 1780 (5'10") 1780 (5'10") 1780 (5'10") 1800 (5'11")
height
Weight ton (US. ton) 2.4 (2.6) 3.1 (3.4) 2.4 (2.6) 3.4 (3.7)
Overall
mm (fi.in) 3110 (10'2") 3110 (10'2") 3110 (10'2") 3110 (10'2")
length
Four-part
Cylinder
ton (US.
Weight 1.7 (1.9) 1.7 (1.9) 1.7 (1.9) 1.7 (1.9)
ton)
Overall
mm (fi.in) 5070 (16'7") 5070 (16'7") 5070 (16'7") 5070 (16'7")
length
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
width
(2) Upper Structure
Overall
mm (fi.in) 2660 (8'8") 2660 (8'8") 2660 (8'8") 2660 (8'8")
height
ton (US.
Weight 17.8 (19.6) 17.8 (19.6) 17.8 (19.6) 17.8 (19.6)
ton)
Overall
mm (fi.in) 5340 (17'6") 5340 (17'6") 5690 (18'8") 5340 (17'6")
length
Overall
mm (fi.in) 875 (2'11") 875 (2'11") 875 (2'11") 875 (2'11")
width
(3) Undercarriage
Overall
mm (fi.in) 1260 (4'2") 1260 (4'2") 1260 (4'2") 1260 (4'2")
height
ton (US.
Weight 16.3 (18.0) 16.3 (18.0) 17.3 (19.1) 16.3 (18.0)
ton)
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
length
Overall
mm (fi.in) 780 (2'7") 780 (2'7") 780 (2'7") 780 (2'7")
Others width
(4)
(Counterweight) Overall
mm (fi.in) 1330 (4'4") 1330 (4'4") 1330 (4'4") 1330 (4'4")
height
ton (US.
Weight 11.0 (12.1) 11.0 (12.1) 11.0 (12.1) 11.0 (12.1)
ton)
(1) Work Equipment The same as four-part transportation
Overall
mm (fi.in) 6270 (20'7") 6280 (20'7") 6440 (21'2") 6270 (20'7")
length
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
Three-part
width
(2) Base Machine
Overall
mm (fi.in) 3470 (11'5") 3430 (11'3") 3470 (11'5") 3470 (11'5")
height
ton (US.
Weight 34.1 (37.6) 34.5 (38.0) 35.1 (38.7) 34.1 (37.6)
ton)
Others
(3) The same as four-part transportation
(Counterweight)
2A-56
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC600 / 600LC-7
Four-part transportation
(1) Work equipment assembly (3) Undercarriage
875 (2'10")
(4'2")
1260
Boom
Arm
FVPM3163
(4) Others
")
2'3
Bucket Boom & arm cylinder 0(
68 31
95
(10
'6"
)
1330 (4'4")
FVPM3164
9 23 ")
2500 (8'2")
1 ")
Three-part transportation
(1) Work equipment assembly (3) Others
2A-57
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC600/600LC-7
Specification Table for Transportation
No. of Part for PC600-7 PC600-7
Item Related Specifications PC600-7 PC600LC-7
Transportation (Quarry spec.) (SE spec.)
Overall
mm (fi.in) 7920 (26'0") 7530 (24'8") 7920 (26'0") 6870 (22'6")
length
Overall
mm (fi.in) 1190 (3'11") 1190 (3'11") 1190 (3'11") 1190 (3'11")
Boom width
Overall
mm (fi.in) 2040 (6'8") 1960 (6'5") 2040 (6'8") 2090 (6'10")
height
Weight ton (US. ton) 4.8 (5.3) 4.7 (5.2) 4.8 (5.3) 4.7 (5.0)
Overall
mm (fi.in) 4870 (16'0") 4870 (16'0") 4870 (16'0") 4230 (13'11")
length
Overall
mm (fi.in) 480 (1'7") 480 (1'7") 480 (1'7") 480 (1'7")
width
Work Equipment
Arm
Overall
mm (fi.in) 1210 (4'0") 1240 (4'1") 1210 (4'0") 1430 (4'8")
height
(1)
ton (US.
Weight 3.2 (3.5) 3.3 (3.6) 3.2 (3.5) 3.4 (3.7)
ton)
Overall
mm (fi.in) 2040 (6'8") 2040 (6'8") 2040 (6'8") 2260 (7'5")
length
Overall
mm (fi.in) 1790 (5'10") 1870 (6'2") 1790 (5'10") 2120 (6'11")
Bucket width
Overall
mm (fi.in) 1870 (6'2") 1880 (6'2") 1870 (6'2") 1800 (5'11")
height
Weight ton (US. ton) 2.5 (2.8) 3.0 (3.3) 2.5 (2.8) 3.4 (3.7)
Overall
mm (fi.in) 3110 (10'2") 3110 (10'2") 3110 (10'2") 3110 (10'2")
length
Four-part
Cylinder
ton (US.
Weight 1.8 (2.0) 1.8 (2.0) 1.8 (2.0) 1.8 (2.0)
ton)
Overall
mm (fi.in) 4970 (16'4") 4970 (16'4") 4970 (16'4") 4970 (16'4")
length
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
width
(2) Upper Structure
Overall
mm (fi.in) 2500 (8'2") 2500 (8'2") 2500 (8'2") 2500 (8'2")
height
ton (US.
Weight 16.8 (18.5) 16.9 (18.6) 16.8 (18.5) 16.8 (18.5)
ton)
Overall
mm (fi.in) 5340 (17'6") 5370 (17'7") 5690 (18'8") 5340 (17'6")
length
Overall
mm (fi.in) 875 (2'11") 875 (2'11") 875 (2'11") 875 (2'11")
width
(3) Undercarriage
Overall
mm (fi.in) 1260 (4'2") 1290 (4'3") 1260 (4'2") 1260 (4'2")
height
ton (US.
Weight 16.4 (18.1) 17.4 (19.2) 17.4 (19.2) 16.4 (18.1)
ton)
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
length
Overall
mm (fi.in) 680 (2'3") 680 (2'3") 680 (2'3") 680 (2'3")
Others width
(4)
(Counterweight) Overall
mm (fi.in) 1330 (4'4") 1330 (4'4") 1330 (4'4") 1330 (4'4")
height
ton (US.
Weight 10.75 (11.8) 10.75 (11.8) 10.75 (11.8) 10.75 (11.8)
ton)
(1) Work Equipment The same as four-part transportation
Overall
mm (fi.in) 6170 (20'3") 6180 (20'4") 6340 (20'10") 6170 (20'3")
length
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
Three-part
width
(2) Base Machine
Overall
mm (fi.in) 3330 (10'11") 3340 (11'0") 3330 (10'11") 3330 (10'11")
height
ton (US.
Weight 33.2 (36.6) 34.3 (37.8) 34.2 (37.7) 33.2 (36.6)
ton)
Others
(3) The same as four-part transportation
(Counterweight)
2A-58
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC800/850-8
Four-part transportation
(1) Work equipment assembly (3) Undercarriage
1305
(4'3")
(4'9")
1445
Boom
5810 (19'1")
FVPM3076
FVPM3075
(4) Others
Arm 98
0(
3'3
OPG ")
FVPM2405
)
3 '1" 31
Bucket Boom, arm cylinder 0( 95
20
95 (10
18 ")
'6"
1790 (5'10")
) 25 0
0( (6'
9.8
") 55kg (121lb)
1540 (5'1")
72kg (159lb)
FVPM3064
17 8")
(5' 90 (2.
10 70
Width: 3290 (10'10") ")
(2) Upper structure
50
50 ) 0(
6030 (19'9") 6'3
") 0( '6" 1'8
0( 1'8 10 ")
0 ") 0 0(
19 32
2775 (9'1")
Three-part transportation
(1) Work equipment assembly (3) Others
6900 (22'8")
2A-59
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC800/850SE-8
Specification Table for Transportation
No. of Part for
Item Related Specifications PC800-8 PC800SE-8 PC850-8 PC850SE-8
Transportation
Overall
mm (fi.in) 8530 (28'0") 7430 (24'5") 8380 (27'6") 7430 (24'5")
length
Overall
mm (fi.in) 1500 (4'11") 1500 (4'11") 1500 (4'11") 1500 (4'11")
Boom width
Overall
mm (fi.in) 2800 (9'2") 2695 (8'10") 2695 (8'10") 2695 (8'10")
height
Weight ton (US. ton) 7.9 (8.7) 7.3 (8.0) 8.1 (8.9) 7.3 (8.0)
Overall
mm (fi.in) 5120 (16'10") 4080 (13'5") 4770 (15'8") 4080 (13'5")
length
Overall
mm (fi.in) 750 (2'6") 750 (2'6") 750 (2'6") 750 (2'6")
width
Work Equipment
Arm
Overall
mm (fi.in) 1345 (4'5") 1695 (5'7") 1420 (4'8") 1695 (5'7")
height
(1)
ton (US.
Weight 4.0 (4.4) 4.9 (5.4) 4.5 (5.0) 4.9 (5.4)
ton)
Overall
mm (fi.in) 2365 (7'9") 2200 (7'3") 2390 (7'10") 2200 (7'3")
length
Overall
mm (fi.in) 1845 (6'1") 2105 (6'11") 1870 (6'2") 2255 (7'5")
Bucket width
Overall
mm (fi.in) 1850 (6'1") 1950 (6'5") 1880 (6'2") 1950 (6'5")
height
Weight ton (US. ton) 2.9 (3.2) 3.4 (3.7) 3.8 (4.2) 3.9 (4.3)
Overall
mm (fi.in) 3580 (11'9") 3235 (10'7") 3235 (10'7") 3235 (10'7")
length
Four-part
Cylinder
ton (US.
Weight 2.3 (2.5) 2.5 (2.8) 2.3 (2.5) 2.5 (2.8)
ton)
Overall
mm (fi.in) 6040 (19'10") 6040 (19'10") 6040 (19'10") 6040 (19'10")
length
Overall
mm (fi.in) 3290 (10'10") 3290 (10'10") 3290 (10'10") 3290 (10'10")
width
(2) Upper Structure
Overall
mm (fi.in) 2835 (9'4") 2835 (9'4") 2835 (9'4") 2835 (9'4")
height
ton (US.
Weight 26.3 (29.0) 26.3 (29.0) 26.4 (29.1) 26.4 (29.1)
ton)
Overall
mm (fi.in) 5810 (19'1") 5810 (19'1") 5810 (19'1") 5810 (19'1")
length
Overall
mm (fi.in) 1380 (4'6") 1380 (4'6") 1400 (4'7") 1400 (4'7")
width
(3) Undercarriage
Overall
mm (fi.in) 1445 (4'9") 1445 (4'9") 1445 (4'9") 1445 (4'9")
height
ton (US.
Weight 21.2 (23.4) 21.2 (23.4) 21.7 (23.9) 21.7 (23.9)
ton)
Overall
mm (fi.in) 3195 (10'6") 3195 (10'6") 3195 (10'6") 3195 (10'6")
length
Overall
mm (fi.in) 950 (3'1") 950 (3'1") 950 (3'1") 950 (3'1")
Others width
(4)
(Counterweight) Overall
mm (fi.in) 1540 (5'1") 1540 (5'1") 1540 (5'1") 1540 (5'1")
height
ton (US.
Weight 10.1 (11.1) 10.1 (11.1) 12.2 (13.4) 12.2 (13.4)
ton)
(1) Work Equipment The same as four-part transportation
Overall
mm (fi.in) 6900 (22'8") 6900 (22'8") 6900 (22'8") 6900 (22'8")
length
Overall
mm (fi.in) 3565 (11'8") 3565 (11'8") 3585 (11'9") 3585 (11'9")
Three-part
width
(2) Base Machine
Overall
mm (fi.in) 3720 (12'2") 3720 (12'2") 3720 (12'2") 3720 (12'2")
height
ton (US.
Weight 47.4 (52.2) 47.4 (52.2) 48.9 (53.9) 48.1 (53.0)
ton)
Others
(3) The same as four-part transportation
(Counterweight)
2A-60
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC750/800-7
Four-part transportation
(1) Work equipment assembly (3) Undercarriage
1305
(4'3")
(4'9")
1445
Boom
5810 (19'1")
FVPM3076
FVPM3075
(4) Others
Arm 319
980 5 (1
(3'3 830 ") 0'6
")
FVPM2405 ") 9
OPG (2'
(1'7")
470
Bucket Boom, arm cylinder
(6'0")
1530
")
6'0
(3'7")
1090
0( 19kg (42 lb)
182
250 (9.8")
37kg (82 lb)
FVPM3064
16 ")
(5' 00 2.8
(2) Upper structure 3") 70(
500
500
5970 (19'7") ") 6") (1'
0(
6'3 (1' 10' 8")
8") 0(
190 320
(*2840 (9'4"))
2730 (8'11")
FVPM3065
OPG (PC800/SE only) FVPM3066
Three-part transportation
(1) Work equipment assembly (3) Others
6840 (22'5")
FVPM3067
2A-61
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC750/750SE-7
Four-part transportation
Length Width Height Weight
mm (ft.in) mm (ft.in) mm (ft.in) ton (US ton)
1. Work equipment.
PC750-7 8505 (27'11") 1500 (4'11") 2610 (8'7") 7.4 (8.2)
Boom
PC750SE-7 7405 (24'4") 1500 (4'11") 2465 (8'1") 6.8 (7.6)
PC750-7 5105 (16'9") 750 (2'6") 1325 (4'4") 4.0 (4.4)
Arm
PC750SE-7 4075 (13'4") 755 (2'6") 1695 (5'7") 4.9 (5.4)
Backhoe PC750-7 2365 (7'9") 1845 (6'1") 1850 (6'1") 3.0 (3.3)
Bucket
PC750SE-7 2200 (7'3") 2105 (6'11") 1950 (6'5") 3.4 (3.7)
Boom cylinder PC750-7/PC750SE-7 3235 (10'7") — — 0.79 × 2 (0.87 × 2)
PC750-7 3580 (11'9") — — 0.88 (0.97)
Arm cylinder
PC750SE-7 2595 (8'6") 0.5 × 2 (0.55 × 1)
2. Upper structure 5970 (19'7") 3195 (10'6") 2730 (8'11")* 24.8 (27.3)
3. Undercarriage PC750-7/PC750SE-7 5810 (19'1") 1305 (4'3") 1445 (4'9") 20.7 (22.8)
4. Other (counterweight, etc.) — — — 10.0 (11.0)
* With KOMTRAX (optional) antenna: 2840 ( 9' 4")
2A-62
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1250/1250SP/1250LC-8
Boom
3130 (10'3")
PC1250: 11.2t 9475x2894x1474
(12.3USt) (31'1")x(9'6")x(4'10")
PC1250SP: 11.1t 8170x3095x1474 Width:3490 (11'9")
(12.2USt) (26'10")x(10'2")x(4'10") FVBH0174 Weight:23.9t (26.3USt)
FVBH0178
Arm
3. Undercarriage
Bucket
Weight
PC1250:30.0t (33.1USt)
15.0t x2(16.5x2USt)
PC1250SP:30.9t(34.1USt)*
PC1250:4.3t 2700x2100x2050
(4.7USt) (8'10")x(6'11")x(6'9") 15.45t x2(17.0x2USt)
:5.5t 2580x2276x2250 PC1250LC:38t (41.9USt)
(6.1USt) (8'6")x(7'6")x(7'5") 19t x2(20.9x2USt)
FVBH0179
(Heavy-duty version) * With full length roller guard
PC1250SP:5.9t 2527x2420x2520
(6.5USt) (8'3")x(7'11")x(8'3") FVBH0176
4. Others
18.4t (20.3 US.ton)
Arm cylinder
1.5t (1.7USt)
Length: 3950 (13'0")
885 (2'11")
Boom cylinder 3470 (11'5")
2.4t [1.2tx2]
(2.64USt) (1.32UStx2) 1960 (6'5")
Length: 3810 (12'6") FVBH0177
1830 (6') 1915 (6'3")
100 (3.9")
2850 (9'4")
600 (2')
400 (1'4")
845 (2'9") 620 (2')
3155 (10'4")
FVBH0180
2A-63
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1250/1250SP/1250LC-7
1. Work equipment ass'y (Backhoe) 2. Upper structure
PC1250: 25.1t (27.7 US.ton)
PC1250SP: 27.0t (29.8 US.ton)
6420(21'1")
Boom
2510(8'3")
PC1250: 11.0t 9475x2894x1474
(12.1USt) (31'1")x(9'6")x(4'10")
PC1250SP: 10.9t 8170x3095x1474 Width:3490 (11'9")
(12.0USt) (26'10")x(10'2")x(4'10") FVBH0174 Weight:23.9t (26.3USt)
FVBH0178
Arm
3. Undercarriage
PC1250:5.9t 4895x1626x890
(6.5USt) (16'1")x(5'4")x(2'11") 6425(21'2") 1222(4')
PC1250SP:6.3t 4914x1683x890 LC:7400(24'3") LC:1295(4'3")
(6.9USt) (16'1")x(5'6")x(2'11") FVBH0175
LC:1640(5'5")
1585(5'2")
Bucket
Weight
PC1250:30.0t (33.1USt)
PC1250:4.3t 2700x2100x2050 15.0t x2(16.5x2USt)
(4.7USt) (8'10")x(6'11")x(6'9") PC1250SP:30.9t(34.1USt)*
PC1250SP:5.9t 2527x2420x2520
15.45t x2(17.0x2USt)
(6.5USt) (8'3")x(7'11")x(8'3") FVBH0176
PC1250LC:38t (41.9USt)
19t x2(20.9x2USt)
Arm cylinder FVBH0179
* With full length roller guard
1.5t (1.7USt)
Boom cylinder
2.4t [1.2tx2]
(2.64USt) (1.32UStx2)
FVBH0177
4. Others
27.7t (30.5 US.ton)
2850(9'4") 600(2')
1260(4'2")
400
(1'4")
2850(9'4")
Width:3540 (11'7")
Weight:9.3t (10.3USt)
845
(2'9")
880(2'11") 620
3470(11'5") (2')
3155(10'4")
1810
(5'11")
1830 1760(5'9")
(6')
100(3.9")
18.0t(19.8USt)
FVBH0180
2A-64
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC1800-6
FVBH0202
2. Arm
FVBH0203
3. Bucket
FVBH0204
4. Upper structure
5. Center frame
6. Left Undercarriage
7. Right Undercarriage
8. Operator cab
9. Counterweight
7.45 (8.2)
2A-65
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC3000-6
2A-66
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC4000-6
2A-67
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC5500-6
Dimensions Length Width Height Weight
Unit Name mm (ft.in) mm (ft.in) mm (ft.in) ton (us ton)
Stick (5,1 m) with 2 Bucket Cylinders, Linkage 7150 2050 2700 31.9
and Rod (23'6") (6'9") (8'10") (35.2)
2A-68
Component Dimensions EXCAVATORS
and Weights (BACKHOE)
PC8000-6
Dimensions Length mm Width mm Height mm Weight ton
Unit Name (ft.in) (ft.in) (ft.in) (U.S.ton)
9300 1790 2400 46
Left Crawler Side Frame without Tracks
(30'6") (5'10") (7'10") (50.7)
9300 1790 2400 46
Right Crawler Side Frame without Tracks
(30'6") (5'10") (7'10") (50.9)
1500 5980 1500 94.4
8 × 12 Piece 1500 mm Track Shoe Group (each group 11.8 t)
(4'11") (19'7") (4'11") (104)
5270 5050 3150 47.5
Carbody Centre
(17'3") (16'6") (10'4") (52.3)
11300 4750 4000 86.3
Superstructure Platform
(37'1") (15'7") (13'1") (95.1)
7300 3800 1000 54
Counterweight
(23'11") (12'6") (3'3") (59.5)
8330 5300 4100 59
Machinery House with 2 Engines
(27'4") (17'5") (13'5") (65)
3500 2200 3740 5.4
Fuel Tank
(11'6") (7'3") (12'3") (6.0)
2700 1910 3680 7
Hydraulic Oil Tank
(8'10") (6'3") (12'1") (7.7)
2620 2030 3700 5
Cab Base
(8'7") (6'8") (12'2") (5.5)
5400 2690 2400 8
Case No.1, with Oil Cooler System
(17'9") (8'10") (7'10") (8.8)
4970 4660 1300 16.2
Case No.2, with Slew Ring
(16'4") (15'3") (4'3") (17.8)
3900 3300 3100 5.8
Case No.3, with Accessories
(12'10") (11'10") (10'2") (6.4)
3700 3100 2500 4.4
Case No.4, with Accessories
(12'2") (10'2") (8'2") (4.9)
6000 2500 2500 5.9
Container Backhoe Accessories No 1
(19'8") (8'2") (8'2") (6.5)
6000 2500 2500 5.8
Container Backhoe Accessories No 2
(19'8") (8'2") (8'2") (17.4)
12000 2500 2500 24.5
Container Backhoe Accessories No 3
(19'8") (8'2") (8'2") (27)
6000 2500 2500 24.1
Container Backhoe Accessories No 4
(19'8") (8'2") (8'2") (26.6)
12300 2700 5100 62
Backhoe Boom (11.5 m)
(40'4") (8'10") (16'9") (68.3)
5800 2200 2300 43.6
Backhoe Stick (5.5 m), with Control arm, linkage and Bucket Cylinder
(19') (7'3") (7'7") (48.1)
4800 4850 4500 43.1
Backhoe Bucket 42 m SAE
(15'9") (15'11") (14'9") (47.5)
2A-69
Shoe Selection EXCAVATORS
(BACKHOE)
Applications of different shoes in accordance with soil characteristics and working conditions.
3 • Road liner (rubber) • The surface of the shoe in • Use in the following places
contact with the ground is will shorten the cutting life
made of rubber, so the of the rubber.
machine can travel on (1) Rocky ground
paved roads without (2) Cold areas
damaging the road (below -25ºC)
surface. (3) Hot areas
• Prevents noise when (above 65ºC)
machine is traveling. • Because there are no
• Rubber pad Paved road grouser, this shoe does not
Indoor work bite into the ground.
2A-70
Shoe Application EXCAVATORS
(BACKHOE)
2A-71
Shoe Application EXCAVATORS
(BACKHOE)
2A-72
Shoe Application EXCAVATORS
(BACKHOE)
Classification of the applications:
Classification Applicable terrain Limitations
Rocky terrain, river 1. Use low gear for traveling over harsh terrain with various obstacles such as rolling
A
banks, & general terrain stones and fallen trees.
1. Not applicable for traveling over harsh terrain with rolling stones and fallen trees.
B General or soft terrain 2. Travel in high gear only on flat ground ; use half speed in low gear for going over
the obstacles, if they are unavoidable.
1. Applicable only when "A" & "B" sink.
Extremely soft terrain 2. Not applicable for traveling over harsh terrain with rolling stones and fallen trees.
C
(swamps) 3. Travel in high gear only on flat terrain ; use half speed in low gear for going over
the obstacles if they are unavoidable.
1. Rubber pad shoes must be used mainly in machine operation on paved road
surfaces. If used on unpaved surfaces, shoe durability will be badly deteriorated
due to rubber cracks, cutouts etc.
The following operations must be avoided.
(a) Work on broken concrete, gravel, etc.
(b) Work on sharp projections like reinforcing iron rods, glass, etc.
(c) Riding on concrete road shoulder, operation on bedrock and in rivers with
D Paved road
abundance of stones, pebbles, etc.
2. In operation on roads covered with water, ice, snow, gravel etc. be careful to avoid
the shoes slipping, especially in carrying or unloading operation of a machine on
or from a truck.
3. In operation at high temperature (65° C or higher) or at low temp. (-25° C or
lower), the rubber will be liable to damage because of the changes in the physical
properties.
NOTE: Select the narrowest possible shoes, depending on the flotation and ground pressure of the
machines. If the shoe is too wide, the load on the track shoe increases and results in bends in the
shoes, cracks in the links, breakage and slipping out of the pins and loosening of the bolts.
2A-73
Ground Pressure EXCAVATORS
(BACKHOE)
Definition: Ground pressure = machine operating weight / total ground contact area
where ; total ground contact area = (L + 0.35H) × shoe width × 2
H
H = Track height
L L = Distance between centers of sprocket and front idler
FVBH0003
2A-74
Ground Pressure EXCAVATORS
(BACKHOE)
2A-75
Ground Pressure EXCAVATORS
(BACKHOE)
2A-76
Ground Pressure EXCAVATORS
(BACKHOE)
Ground Change in Boom
Shoe width Ground contact
Shoe type pressure operating Arm
mm (in) area cm2 (sq.in)
kg/cm2 (PSI) weight kg (lb) Bucket
600 (24")* 42310 (6558) 0.51 (7.25) ±0 : 5.7 m (18'8")
PC228US-3** Triple-grouser : 2.9 m (9'6")
: 0.78 m3 (1.02 cu.yd)
600 (24") 47350 (7339) 0.47 (6.68) -295 (650) : 5.7 m (18'8")
PC228USLC-3** Triple-grouser 700 (28")* 55240 (8562) 0.41 (5.83) ±0 : 2.9 m (9'6")
: 0.78 m3 (1.02 cu.yd)
550 (22")* 40984 (6353) 0.56 (7.96) ±0 : 5.7 m (18'8")
PC230NHD-8 Triple-grouser : 2.9 m (9'6")
: 0.94 m3 (1.23 cu.yd)
600 (24") 49330 (7646) 0.51 (7.25) -300 (661) : 5.85 m (19'2")
700 (28")* 57550 (8920) 0.44 (6.26) ±0 : 3.0 m (9'10")
PC240LC-8 Triple-grouser
800 (31.5") 65770 (10194) 0.39 (5.55) +300 (661) : 1.41 m3 (1.84 cu.yd)
900 (35.5") 73990 (11468) 0.35 (5.00) +600 (1323)
600 (24")* 46870 (7265) 0.52 (7.39) ±0 : 5.85 m (19'2")
PC240NLC-8 Triple-grouser 700 (28") 54680 (8475) 0.45 (6.40) +300 (661) : 3.05 m (10')
800 (31.5") 62490 (9686) 0.40 (5.69) +600 (1323) : 1.41 m3 (1.84 cu.yd)
600 (24")* 48280 (7483) 0.56 (7.96) ±0 : 5.85 m (19'2")
PC270-8 Triple-grouser 700 (28") 56330 (8731) 0.49 (6.97) +110 (243) : 3.05 m (10'0")
800 (31.5") 64370 (9977) 0.43 (6.11) +460 (1010) : 1.26 m3 (1.65 cu.yd)
600 (24")* 48280 (7483) 0.56 (7.96) ±0 : 5.85 m (19'2")
PC270-7*4 Triple-grouser 700 (28") 56330 (8731) 0.49 (6.97) +110 (243) : 3.05 m (10'0")
800 (31.5") 64370 (9977) 0.43 (6.11) +460 (1010) : 1.3 m3 (1.70 cu.yd)
700 (28")* 60630 (9398) 0.48 (6.80) ±0 : 5.85 m (19'2")
PC270LC-8***
PC270LC-8 Triple-grouser 800 (31.5") 69290 (10740) 0.43 (6.05) +500 (1102) : 3.05 m (10'0")
850 (33.5") 73620 (11410) 0.41 (5.78) +950 (2094) : 1.41 m3 (1.85 cu.yd)
600 (24") 52450 (8130) 0.56 (7.96) -400 (882) : 5.85 m (19'2")
700 (28")* 61190 (9484) 0.49 (6.97) ±0 : 2.5 m (8'2")
PC290LC-8 Triple-grouser
800 (31.5") 69930 (10839) 0.43 (6.11) +400 (882) : 1.74 m3 (2.28 cu.yd)
850 (33.5") 74300 (11517) 0.41 (5.83) +600 (1323)
600 (24") 52450 (8130) 0.56 (7.96) ±0 : 5.85 m (19'2")
700 (28")* 61190 (9484) 0.49 (6.97) +400 (882) : 2.5 m (8'2")
PC290NLC-8 Triple-grouser
800 (31.5") 69930 (10839) 0.43 (6.11) +800 (1764) : 1.74 m3 (2.28 cu.yd)
850 (33.5") 74300 (11517) 0.41 (5.83) +1000 (2205)
600 (24")* 48280 (7483) 0.64 (9.10) ± : 6.47 m (21'3")
PC300-7E0
PC300-7 Triple-grouser 700 (28") 56330 (8731) 0.55 (7.82) +360 (794) : 3.185 m (10'5")
800 (31.5") 64370 (9977) 0.47 (6.68) +710 (1565) : 1.4 m3 (1.83 cu.yd)
700 (28") 65390 (10135) 0.57 (8.13) ±0 : 6.5 m (21'3")
PC300HD-7E0 Triple-grouser 800 (31.5")* 74730 (11583) 0.51 (7.21) +500 (1102) : 3.185 m (10'5")
850 (33.5) 79400 (12307) 0.46 (6.47) +900 (1984) : 1.96 m3 (2.56 cu.yd)
600 (24")* 48280 (7483) 0.65 (9.24) ±0 : 6.47 m (21'3")
PC300-7*4 Triple-grouser
700 (28") 56330 (8731) 0.55 (7.82) +360 (794) : 3.185 m (10'5")
600 (24") 48240 (7483) 0.68 (9.67) -710 (1565) : 6.47 m (21'3")
PC300SE-7 Triple-grouser 700 (28") 56330 (8731) 0.58 (8.25) -350 (772) : 2.1 m3 (2.74 cu.yd)
800 (31.5")* 64370 (9977) 0.5 (7.11) ±0 : 2.22 m (7'3")
600 (24") 52230 (8096) 0.60 (8.53) -380 (838) : 6.47 m (21'3")
PC300LC-7E0
Triple-grouser 700 (28")* 60940 (9446) 0.52 (7.36) ± : 3.185 m (10'5")
PC300LC-7
800 (31.5") 69650 (10796) 0.46 (6.54) +380 (838) : 1.4 m3 (1.83 cu.yd)
700 (28") 60940 (9446) 0.54 (7.68) -1330 (2932) : 6.50 m (21'3")
PC300LC-7E0*** Triple-grouser 800 (31.5")* 69650 (10796) 0.49 (6.97) ±0 : 3.185 m (10'5")
850 (33.4") 74000 (11470) 0.47 (6.68) +190 (419) : 1.96 m3 (2.56 cu.yd)
700 (28") 60630 (9398) 0.53 (7.54) -569 (1254) : 5.85 m (19'2")
PC308USLC-3E0 Triple-grouser 800 (31.5") 69291 (10740) 0.46 (6.54) -192 (423) : 3.05 m (10'0")
850 (33.5")* 73622 (11411) 0.44 (6.28) ±0 : 1.21 m3 (1.59 cu.yd)
600 (24") 52230 (8096) 0.63 (8.96) -380 (838) : 6.47 m (21'3")
700 (28")* 60940 (9446) 0.55 (7.82) ±0 : 2.6 m (8'6")
PC340LC-7E0 Triple-grouser
800 (31.5") 69650 (10796) 0.49 (6.97) +380 (838) : 1.38 m3 (1.80 cu.yd)
850 (33.5") 74000 (11470) 0.46 (6.54) +570 (1257)
600 (24")* 52230 (8096) 0.63 (8.96) ±0 : 6.47 m (21'3")
PC340NLC-7E0 Triple-grouser 700 (28")* 60940 (9446) 0.55 (7.82) +380 (8.38) : 2.6 m (8'6")
800 (31.5") 69650 (10796) 0.48 (6.83) +760 (1675) : 1.38 m3 (1.80 cu.yd)
* Standard shoe *4 China source
** UK source *5 Indonesia source
*** USA source
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on soft
and swampy terrain where the standard excavator with standard shoe is not usable due to sinkage of
the tracks. If such shoes are used in swampy fields with stones, stumps and roots, bending of the
shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other damage may
result. Therefore, the job site must be studied carefully, to provide the customer with correct
instructions and advice.
2A-77
Ground Pressure EXCAVATORS
(BACKHOE)
2A-78
Ground Pressure EXCAVATORS
(BACKHOE)
2A-79
Ground Pressure EXCAVATORS
(BACKHOE)
2A-80
Bucket Capacity Definition EXCAVATORS
(BACKHOE)
BUCKET CAPACITY RATING
Bucket capacity is measured in terms of either struck or heaped capacity. Generally, the heaped capacity
description is more frequently used.
Komatsu Ltd. rates the excavator bucket capacity based on ISO and other standards such as JIS, PCSA and
SAE (JIS and SAE are based on ISO.)
1) Struck Capacity
The struck capacity is the volume capacity of
the bucket after it has been struck at the strike
plane. The strike plane passes through the top Ve Struck plane
2A-81
Bucket Selection EXCAVATORS
(BACKHOE)
Bucket selection for excavator
Komatsu offers various kinds and sizes of buckets so that the users are able to select the optimum bucket for
the type of soil and the work to be performed. This enables the work to be accomplished most efficiently.
The following is a guide for selecting the optimum bucket.
2. Selection of size
The following two points 1) and 2) should be considered altogether.
1) From the machine stability (For backhoe type)
If the bucket size (capacity) is too big, it will worsen the stability of the machine, resulting in danger of
tipping over or rolling over.
The concept of the bucket selection from the point of machine stability is from the following.
Putting A as the maximum allowable load from over-side (sideways) machine stability and B as the
bucket working load (bucket weight + carrying material weight), the size of the bucket should be
selected so as to be;
B ≤A
From Figure 1,
A = W1 + (L0 / L) W2 = W1 + W2 Approximately
where, W1 : The weight of the empty bucket shown in the table of Lift Capacity. The value of the
weight is shown in the tables of "Bucket and Arm Combination".
W2 : The smallest lift capacity in the table of Lift Capacity at respective boom length and
arm length (The lift capacity differs by the arm vertical position)
From Figure 2,
B = W3 + W4
where, W3 : The bucket weight used for the job
W4 : The weight of carried material
(= rated bucket capacity × specific gravity of carried material)
W4
W1
W3
W2
L L
L0
FVBH0239 FVBH0240
Figure 1 Figure 2
2A-82
Bucket Selection EXCAVATORS
(BACKHOE)
2) From the bucket penetration force
When selecting a bucket, check whether the penetration force of the bucket is sufficient for the soil at
the job site. The bucket penetration force is the digging force per unit width of the bucket.
Bucket penetration force = Digging force / Bucket width
The larger the digging force per unit width of the bucket is, the larger the bucket penetration force
(penetration performance) is.
The digging force is generated by the bucket hydraulic cylinder(s) and the boom hydraulic cylinder(s).
In addition to the digging force, the width of the bucket and the tip radius (dimension from the bucket
hinge center to the forefront of the bucket teeth) affects the bucket penetration force.
(1)Digging force
Rated digging force of the bucket is the force at the foremost digging point of the bucket. This
digging force is generated by the bucket hydraulic cylinder and the arm hydraulic cylinder. The
former is called the "Bucket digging force" and the latter is called the "Arm crowd force".
These digging forces are calculated by applying working relief hydraulic pressure to the cylinder(s).
The weight of components and friction are to be excluded in the calculation. The definition of the
digging forces are based on SAE J1179 and are as follows.
a. Bucket digging force
The rated bucket digging force (V, in the
top figure) is the force generated by the
bucket cylinder(s) and the tangent to the Bucket cylinder
arc of radius C. The bucket should be
positioned to obtain the maximum output
moment from the bucket cylinder(s) and V V
the connecting linkage. C C
b. Arm crowd force 90
90
The rated arm crowd force (W, in the
bottom figure) is the force generated by
the arm cylinder(s) and the tangent to the Arm cylinder
arc of the radius B. The arm should be 90
positioned to obtain the maximum output
moment from the arm cylinder(s) and the 90
bucket, positioned as mentioned above.
(2)Bucket width
The wider the bucket is, the worse the
bucket penetration is. Generally speaking, a B B
wide bucket is recommended for excavating
soil that can be broken easily. A narrow
bucket is better suited for work on hard soil. W
The width of the bucket must be limited also W
from the point of durability of the bucket, 90 90
arm, boom and their hinge pins and
bushings,. If the width is too great, it will FVBH0018
cause excessive twist on the relevant parts,
resulting in premature breakage or wear.
(3)Tip radius
The tip radius also affects the digging force
of the bucket. If the bucket cylinder is
provided with the same pushing force, the
bucket with the shorter tip radius is better Narrower Wider
able to dig hard soil than the bucket with the Bucket width
longer tip radius.
The bucket width and the tip radius should Shorter Longer
be selected with the combination of the
digging forces mentioned above in order to
have appropriate bucket penetration.
Tip radius
When you need the values for allowable FVBH0045
bucket width and bucket penetration force
for each model, you can request and get the
figures from Komatsu through your
distributor.
2A-83
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
This shows the bucket sizes currently available for respective models produced in various Komatsu plants, in
relation with the arm length.
All allowable sizes from the concept of machine stability in "BUCKET SELECTION" are not shown, but it is
possible for Komatsu plants to develop the various size buckets according to the theory of "BUCKET
SELECTION", if it is requested through a distributor.
The theory of "BUCKET SELECTION" can be applied when a bucket is procured from a local attachment
manufacturers. But the quality of the bucket from a local supplier can not be guaranteed by Komatsu.
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters
m3 (cu.yd) m3 (cu.yd) cutters)
mm (in) mm (in)
PC01-1 0.48 (1'7") —
0.008 (0.01) 0.007 (0.009) 250 (9.8") 265 (10.4") 7 (15) —
PC09-1 0.684 (2'3") 0.687(2'3") 0.884 (2'11")
0.017 (0.022) — 225 (8.9") 250 (9.8") 11 (24)
0.022 (0.029)* — 325 (12.8") 350 (13.8") 14 (31)
0.025 (0.033) — 375 (14.8") 400 (15.7") 15 (33)
PC12R-8 0.88 (2'11") 1.13 (3'8")
0.03 (0.04) — 250 (9.8") — 20 (44)
0.035(0.046) — 300 (11.8") — 23 (51)
0.04 (0.05)* — 350 (13.8") — 24 (53)
0.05 (0.065) — 400 (15.7") — 25 (55)
0.06 (0.08) — 450 (17.7") — 26 (57)
PC14R-2 0.88 (2'11") 1.13 (3'8")
0.03 (0.04) — 250 (9.8") — 19 (42)
0.035(0.046) — 300 (11.8") — 20 (44)
0.04 (0.05)* — 350 (13.8") — 22 (48)
0.05 (0.065) — 400 (15.7") — 23 (51)
0.06 (0.08) — 450 (17.7") — 25 (55)
PC16R-2 0.965 (2'2") 1.215 (4'10")
0.03 (0.04) — 250 (9.8") — 19 (42)
0.035(0.046) — 300 (11.8") — 20 (44)
0.04 (0.05)* — 350 (13.8") — 22 (48)
0.05 (0.065) — 400 (15.7") — 23 (51)
0.06 (0.08) — 450 (17.7") — 25 (55)
PC18MR-2, PC15MRX-1 0.965 (3'2") 1.215 (4'0")
0.022 (0.029) — 300 (11.8") 350 (13.8")
0.04 (0.05) — 350 (13.8") 400 (15.7")
0.044 (0.06) — 400 (15.7") 450 (17.7")
PC15R-8 0.965 (3'2") 1.215 (4'0")
0.03 (0.04) — 250 (9.8") — 20 (44)
0.035(0.046) — 300 (11.8") — 23 (51)
0.04 (0.05)* — 350 (13.8") — 24 (53)
0.05 (0.065) — 400 (15.7") — 25 (55)
0.06 (0.08) — 450 (17.7") — 26 (57)
PC20MR-2 1.015 (3'4") 1.365 (4'6")
0.033 (0.043) 0.03 (0.04) 250 (9.8") 320 (12.6") 32 (70)
0.044 (0.058) 0.04 (0.05) 350 (13.8") 420 (16.2") 37 (82)
0.066 (0.086) 0.06 (0.08) 430 (16.9") 500 (19.7") 48 (106)
0.08 (0.10) 0.07 (0.09) 530 (20.9") 600 (23.6") 52 (115)
PC27MR-2 1.11 (3'8") 1.41 (4'8")
0.035 (0.046) 0.03 (0.04) 250 (10") 320 (12.6") —
0.044 (0.058) 0.04 (0.05) 280 (11") 350 (13.8") —
0.08 (0.10) 0.07 (0.09) 430 (17") 500 (19.7") —
0.09 (0.12) — 430 (21") 500 (19.7") —
* Strengthened bucket
** Breaker arm
*** Without side cutters
2A-84
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters
m3 (cu.yd) m3 (cu.yd) cutters)
mm (in) mm (in)
PC27MR-2*4 1.11 (3'8") 1.41 (4'8")
0.045 (0.059) — 250 (10") — 32 (70)***
0.060 (0.078) — 350 (13.8") — 40 (88)***
0.075 (0.098) — 450 (17.7") — 52 (115)***
0.095 (0.124) — 600 (23.6") — 60 (132)***
0.105 (0.137) — 650 (25.6") — 65 (143)***
PC30MR-2 1.26 (4'1") 1.66 (4'4")
0.035 (0.046) 0.03 (0.04) 250 (9.8") 320 (12.6") 50 (110)
0.044 (0.058) 0.04 (0.05) 280 (11.0") 350 (13.8") 52 (115)
0.055 (0.07) 0.05 (0.065) 350 (13.8") 420 (16.5") 58 (129)
0.09 (0.12) 0.08 (0.10) 430 (16.9") 500 (19.7") 63 (139)
0.11 (0.14) 0.10 (0.13) 530 (20.9") 600 (23.6") 81 (178)
PC30MR-2*4 1.26 (4'1") 1.66 (4'4")
0.035 (0.046) — 300 (11.8") — 55 (121)
0.07 (0.09) — 400 (15.7") — 65 (143)
0.095 (0.12) — 500 (19.7") — 80 (176)
0.12 (0.16) — 600 (23.6") — 90 (198)
0.13 (0.17) — 650 (25.6") — 95 (209)
PC35MR-2 1.35 (4'5") 1.75 (5'9")
0.055 (0.072) 0.05 (0.065) 350 (13.8") 420 (16.5") 59 (130)
0.09 (0.12) 0.08 (0.10) 430 (16.9") 500 (19.7") 78 (172)
0.11 (0.143) 0.10 (0.13) 530 (20.9") 600 (23.6") 83 (183)
0.13 (0.17) 0.12 (0.16) 630 (24.8") 700 (27.6") 98 (216)
PC35MR-2*4 1.35 (4'5") 1.75 (5'9")
0.035 (0.046) — 300 (11.8") — 55 (121)
0.07 (0.09) — 400 (15.7") — 65 (143)
0.095 (0.12) — 500 (19.7") — 80 (176)
0.12 (0.16) — 600 (23.6") — 90 (198)
0.13 (0.17) — 650 (25.6") — 95 (209)
PC40MR-2 1.44 (4'9") 1.9 (6'3")
0.055 (0.07) 0.05 (0.065) 300 (11.8") 370 (14.6") 89 (196)
0.11 (0.14) 0.10 (0.13) 430 (16.9") 500 (19.7") 94 (207)
0.14 (0.18) 0.13 (0.17) 535 (21.1") 600 (23.6") 105 (231)
0.16 (0.21) 0.12 (0.18) 585 (23.0") 650 (25.6") 121 (267)
PC50MR-2 1.64 (5'5") 2.0 (6'7")
0.055 (0.07) 0.05 (0.065) 300 (11.8") 370 (14.6") 89 (196)
0.11 (0.14) 0.10 (0.13) 430 (16.9") 500 (19.7") 94 (207)
0.16 (0.21) 0.21 (0.18) 585 (23.0") 650 (25.6") 121 (267)
PC50MR-2*4 1.64 (5'5") 2.0 (6'7")
0.07 (0.09) — 300 (11.8") — 75 (165)
0.1 (0.13) — 400 (15.7") — 90 (198)
0.125 (0.16) — 500 (19.7") — 100 (220)
0.15 (0.20) — 600 (23.6") — 115 (254)
0.175 (0.29) — 700 (27.6") — 125 (276)
PC55MR-2 1.64 (5'5") 2.0 (6'7")
0.2 (0.26) — 630 (24.8") 700 (27.6") 160 (353) —
* Strengthened bucket
*** Without side cutters
*4 Italy source
2A-85
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
1.7 2.1
PC75R-2 (5'7") (6'11")
0.086 (0.11) — 300 (11.8") — 128 (282)* —
0.128 (0.17) — 400 (15.7") — 160 (353)* —
0.171 (0.22) — 500 (19.7") — 184 (406)* —
0.2 (0.26) — 600 (23.6") — 174 (384)* —
0.232 (0.30) — 700 (27.6") — 189 (417)* —
0.265 (0.35) — 800 (31.5") — 196 (432)* —
1.65 2.25
PC78US-6 (5'5") (7'5")
0.09 (0.12) 0.08 (0.10) 350 (13.8") 450 (17.7") 148 (330) —
0.12 (0.16) 0.11 (0.14) 450 (17.7") 550 (21.7") 161 (355) —
0.20 (0.26) 0.18 (0.24) 550 (21.7") 650 (25.6") 184 (406) —
0.28 (0.37) 0.25 (0.33) 650 (25.6") 750 (29.5") 212 (467) —
0.34 (0.45) 0.32 (0.42) 725 (28.5") 825 (32.5") 220 (485) —
1.65 2.25
PC78MR-6 (5'5") (7'5")
0.09 (0.12) 0.08 (0.10) 350 (13.8") 450 (17.7") 148 (330) —
0.12 (0.16) 0.11 (0.14) 450 (17.7") 550 (21.7") 161 (355) —
0.20 (0.26) 0.18 (0.24) 550 (21.7") 650 (25.6") 184 (406) —
0.28 (0.37) 0.25 (0.33) 650 (25.6") 750 (29.5") 212 (467) —
0.34 (0.45) 0.32 (0.42) 725 (28.5") 825 (32.5") 220 (485) —
1.6 1.85 2.3
PC95R-2 (5'3") (6'1") (7'7")
0.086 (0.11) — 300 (11.8") — 128 (282)*
0.128 (0.17) — 400 (15.7") — 160 (353)*
0.171 (0.22) — 500 (19.7") — 184 (406)*
0.213 (0.28) — 600 (23.6") — 200 (441)*
0.255 (0.33) — 700 (27.6") — 218 (481)*
0.298 (0.39) — 800 (31.5") — 236 (520)*
0.34 (0.44) — 900 (35.4") — 256 (564)*
1.85 2.0 2.3
PC110R-1 (6'1") (6'7") (7'7")
0.093 (0.12) — 300 (11.8") — 168 (370)*
0.139 (0.18) — 400 (15.7") — 194 (428)*
0.181 (0.24) — 500 (19.7") — 218 (481)*
0.225 (0.29) — 600 (23.6") — 234 (516)*
0.27 (0.35) — 700 (27.6") — 252 (556)*
0.314 (0.41) — 800 (31.5") — 270 (595)*
0.36 (0.47) — 900 (35.4") — 294 (648)*
0.4 (0.52) — 1000 (39.4") — 320 (705)*
2.1 2.50 3.00
PC120-6 (6'11") (8'2") (9'10")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 566 (22.3") 256 (564)
0.28 (0.37) 0.26 (0.34) 600 (23.6") 720 (28.3") 303 (668)
0.36 (0.47) 0.33 (0.43) 700 (27.6") 820 (32.3") 330 (728)
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880)
0.60 (0.78) 0.55 (0.72) 1000 (39.4") — 400 (882)*
0.18 (0.24) 0.16 (0.21) 450 (17.7") 566 (22.3") 256 (564)
2.1 2.50 3.00
PC120-6*4, PC120LC-6*4 (6'11") (8'2") (9'10")
0.35 (0.46) — 610 (24") — 421 (928)*
0.50 (0.65) — 762 (30") — 463 (1021)*
0.60 (0.79) — 914 (36") — 525 (1157)*
0.70 (0.92) — 1067 (42") — 564 (1244)*
0.34 (0.44) — 610 (24") — 441 (972)*
0.45 (0.59) — 762 (30") — 509 (1122)*
0.56 (0.73) — 914 (36") — 581 (1280)*
0.67 (0.88) — 1067 (42") — 652 (1437)*
* Without side cutters For the source of each model, see the tables from 2A-14 to 2A-26.
** UK source
*** USA source
*4 For USA
*5 For UK
*6 China source
2A-86
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
cutters cutters m (ft.in)
m3 (cu.yd) m3 (cu.yd) (With side cutters)
mm (in) mm (in)
2.1 2.50 3.00
PC138US-2 (6'11") (8'2") (9'10")
0.18 (0.24) 0.16 (0.21) 450 (17.7") 570 (22.4") 256 (565)
0.29 (0.38) 0.26 (0.34) 600 (23.6") 720 (28.3") 303 (670)
0.36 (0.50) 0.33 (0.43) 700 (27.6") 820 (32.3") 330 (730)
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880)
0.60 (0.78) 0.55 (0.72) 1000 (39.4") — 380 (840)*
2.1 2.50 3.00
PC138US-2*5 (6'11") (8'2") (9'10")
0.25 (0.33) — 500 (19.7") — 325 (716)*
0.32 (0.42) — 600 (23.6") — 350 (772)*
0.48 (0.63) — 800 (31.5") — 440 (970)*
0.56 (0.73) — 900 (35.4") — 475 (1047)*
0.64 (0.84) — 1000 (39.4") — 505 (1113)*
0.72 (0.94) — 1100 (43.3") — 560 (1235)*
2.1 2.50 3.00
PC138USLC-2 (6'11") (8'2") (9'10")
0.35 (0.46) — 610 (24") — 421 (928)*
0.50 (0.65) — 762 (30") — 463 (1021)*
0.60 (0.79) — 914 (36") — 525 (1157)*
0.70 (0.92) — 1067 (42") — 564 (1244)*
0.34 (0.44) — 610 (24") — 441 (972)*
0.45 (0.59) — 762 (30") — 509 (1122)*
0.56 (0.73) — 914 (36") — 581 (1280)*
0.67 (0.88) — 1067 (42") — 652 (1437)*
2.1 2.50 3.00
PC130-7** (6'11") (8'2") (9'10")
0.25 (0.33) — 500 (19.7") — 325 (716)*
0.32 (0.42) — 600 (23.6") — 350 (772)*
0.40 (0.52) — 700 (27.6") — 390 (860)*
0.48 (0.63) — 800 (31.5") — 440 (970)*
0.56 (0.73) — 900 (35.4") — 475 (1047)*
0.64 (0.84) — 1000 (39.4") — 505 (1113)*
0.72 (0.94) — 1100 (43.3") — 560 (1235)*
0.80 (1.05) — 1200 (47.2") — 620 (1367)*
2.1 2.50 3.00
PC130-7*6 (6'11") (8'2") (9'10")
0.36 (0.47) — 700 (27.6") 825 (32.5") 361 (796)
0.45 (0.59) — 833 (32.8") 958 (37.7") 395 (871)
0.53 (0.69) — 859 (33.8") 984 (38.7") 433 (955)
0.64 (0.84) — 1000 (39.4") 1125 (44.3") 485 (1069)
2.50
PC130-6 MIGHTY (8'2")
0.50 (0.65) 0.45 (0.59) 859 (33.8") 979 (38.5") 399 (880) — —
2.25 2.61 2.90
PC160LC-7** (7'5") (8'7") (9'6")
0.27 (0.35) 0.25 (0.33) 450 (17.7") 575 (22.6") 369 (813)*
0.40 (0.52) 0.36 (0.47) 600 (23.6") 725 (28.5") 413 (910)*
0.49 (0.64) 0.45 (0.59) 700 (27.6") 825 (32.5") 451 (994)*
0.58 (0.96) 0.53 (0.69) 800 (31.5") 925 (36.4") 480 (1058)*
0.67 (0.88) 0.61 (0.80) 900 (35.4") 1025 (40.4") 518 (1142)*
0.76 (0.99) 0.70 (0.92) 1000 (39.4") 1125 (44.3") 547 (1265)*
0.95 (1.24) 0.85 (1.11) 1200 (47.2") 1325 (52.2") 614 (1354)*
2.25 2.61 2.90
PC160LC-7 (7'5") (8'7") (9'6")
0.60 (0.78) 0.55 (0.72) 900 (35.4") 1000 (39.4") 474 (1040)
0.65 (0.85) 0.60 (0.78) 966 (38.0") 1066 (42.0) 499 (1100)
0.70 (0.92) 0.65 (0.85) 1100 (43.3") — 504 (1100)*
* Without side cutters For the source of each model, see the tables from 2A-14 to 2A-26.
** UK source
*** USA source
*4 For USA
*5 For UK
*6 China source
2A-87
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.61 2.9
PC160LC-7*7 (8'7") (9'6")
0.47 (0.62) — 610 (24") 545 (1201)
0.63 (0.82) — 762 (30") 585 (1289)
0.79 (1.03) — 914 (36") 659 (1452)
0.95 (1.24) — 1067 (42") 719 (1585)
0.45 (0.59) — 610 (24") 626 (1380)
0.60 (0.79) — 762 (30") 659 (1452)
0.76 (1.00) — 914 (36") 740 (1632)
0.93 (1.22) — 1067 (42") 806 (1777)
2.25 2.61 2.90
PC180LC-7, PC180NLC-7 (7'5") (8'7") (9'6")
0.40 (0.52) 0.36 (0.47) 600 (23.6") 725 (28.5") 413 (910)*
0.49 (0.64) 0.45 (0.59) 700 (27.6") 825 (32.5") 451 (994)*
0.58 (0.76) 0.53 (0.69) 800 (31.5") 925 (36.4") 480 (1058)*
0.67 (0.88) 0.61 (0.80) 900 (35.4") 1025 (40.4") 518 (1142)*
0.95 (1.24) 0.85 (1.11) 1200 (47.2") 1325 (52.2") 614 (1354)*
1.14 (1.49) 1.03 (1.35) 1400 (55.1") 1525 (60.0") 680 (1499)*
1.84 2.41 2.93
PC200-8, PC200LC-8 (6') (7'11") (9'7")
0.50 (0.65) 0.45 (0.59) 750 (29.5") 875(34.4") 478 (1050)
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1170(46.1") 635(1400)
0.93 (1.22) 0.80 (1.05) 1200 (47.2") 1325(52.2") 696(1530)
1.05 (1.37) 0.90 (1.18) 1330 (52.4") 1455(57.3") 757 (1670)
1.17 (1.53) 1.00 (1.31) 1450 (57.1") — *940 (2070)
1.84 2.41 2.93
PC200-7, PC200LC-7, PC200-7*6 (6') (7'11") (9'7")
0.50 (0.65) 0.45 (0.59) 750 (29.5") 855 (33.7") 478 (1050)
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 645 (1420)
0.93 (1.22) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 696 (1530)
1.05 (1.37) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 757 (1670)
1.17 (1.53) 1.00 (1.31) 1450 (57.1") — 940 (2070)*
1.84 2.41 2.93
PC200-7*5, PC200LC-7*5 (6') (7'11") (9'7")
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 658 (1450)
0.80 (1.05)*4 0.70 (0.92) 1045 (41.1") 1150 (45.3") 783 (1726)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 728 (1605)
1.0 (1.31) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 772 (1702)
2.41 2.93 3.90
PC200-8, PC200LC-8*** (7'11") (9'7") (12'9")
0.50 (0.66) — 610 (24") — 538 (1187)
0.67 (0.88) — 762 (30") — 661 (1457)
0.85 (1.13) — 914 (36") — 753 (1659)
1.02 (1.36) — 1067 (42") — 822 (1812)
1.20 (1.59) — 1219 (48") — 921 (2830)
1.8 2.4 2.9
PC210-8** (5'11") (7'10") (9'6")
0.43 (0.56) — 600 (23.6") — 570 (1257)
0.52 (0.68) — 700 (27.6") — 610 (1345)
0.63 (0.82) — 800 (31.5") — 650 (1433)
0.73 (0.95) — 900 (35.4") — 690 (1521)
0.84 (1.10) — 1000 (39.4") — 740 (1631)
0.94 (1.23) — 1100 (43.3") — 820 (1808)
1.05 (1.37) — 1200 (47.2") — 850 (1874)
1.16 (1.52) — 1300 (51.2") — 880 (1940)
1.26 (1.65) — 1400 (55.1") — 950 (1433)
1.37 (1.79) — 1500 (59.1") — 1000 (2205)
1.49 (1.95) — 1600 (63.0") — 1100 (2425)
1.58 (2.07) — 1700 (66.9") — 1150 (2535)
1.68 (2.20) — 1800 (70.9") — 1200 (2645)
* Without side cutters For the source of each model, see the tables from 2A-14 to 2A-26.
** UK source
*** USA source
*4 Heavy-duty bucket
*5 China source
*6 Indonesia source
*7 For USA
2A-88
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
1.8 2.4 2.9
PC210LC-8**, PC210NLC-8** (5'11") (7'10") (9'6")
0.43 (0.56) — 600 (23.6") — 570 (1257)
0.52 (0.68) — 700 (27.6") — 610 (1345)
0.63 (0.82) — 800 (31.5") — 650 (1433)
0.73 (0.95) — 900 (35.4") — 690 (1521)
0.84 (1.10) — 1000 (39.4") — 740 (1631)
0.94 (1.23) — 1100 (43.3") — 820 (1808)
1.05 (1.37) — 1200 (47.2") — 850 (1874)
1.16 (1.52) — 1300 (51.2") — 880 (1940)
1.26 (1.65) — 1400 (55.1") — 950 (1433) (NLC: )
1.37 (1.79) — 1500 (59.1") — 1000 (2205) (NLC: ) (NLC: )
1.49 (1.95) — 1600 (63.0") — 1100 (2425) (NLC: ) (NLC: ) (NLC: )
1.58 (2.07) — 1700 (66.9") — 1150 (2535) (NLC: ) (NLC: )
1.68 (2.20) — 1800 (70.9") — 1200 (2645) (NLC: )
1.84 2.41 2.93
PC210-7*5, PC210LC-7*5 (6') (7'11") (9'7")
0.80 (1.05)*4 0.70 (0.92) 1045 (41.1") 1150 (45.3") 783 (1726)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 728 (1605)
1.0 (1.31) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 772 (1702)
2.00 2.50 3.05
PC220-8, PC220LC-8 (6 '7") (8 '2") (10' 0")
0.72(0.94) 0.65(0.85) 900(35.4") 1005(39.6") 658(1450)
1.00(1,31) 0.90(1.18) 1155(45.5") 1260(49.6") 734(1620)
1.14(1.49) 1.00(1,31) 1300(51.2") 1405(55.3") 793(1750)
1.26(1.65) 1.10(1.44) 1400(55.1") 1505(59.3") 845(1860)
2.00 2.50 3.05
PC220-7, PC220LC-7 (6'7") (8'2") (10')
0.72 (0.94) 0.65 (0.85) 900 (35.4") 1005 (39.6") 658 (1450)
1.00 (1.31) 0.90 (1.18) 1155 (45.5") 1260 (49.6") 734 (1620)
1.14 (1.49) 1.00 (1.31) 1300 (51.2") 1405 (55.3") 793 (1750)
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3") 845 (1860)
2.00 2.50 3.05 3.50
PC220-7*5, PC220LC-7*5 (6'7") (8'2") (10') (11'6")
0.72 (0.94) 0.65 (0.85) 900 (35.4") 1005 (39.6") 658 (1450)
1.00 (1.31) 0.90 (1.18) 1155 (45.5") 1260 (49.6") 787 (1735)
1.17 (1.49) 1.00 (1.31) 1300 (51.2") 1405 (55.3") 858 (1892)
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3") 896 (1975)
3.05 3.5
PC220LC-8*** (10') (11'6")
0.58 (0.76) — 610 (24") — 765 (1686)
0.78 (1.02) — 762 (30") — 774 (1707)
0.99 (1.29) — 914 (36") — 869 (1915)
1.20 (1.57) — 1067 (42") — 949 (2092)
1.41 (1.85) — 1219 (48") — 1045 (2304)
2.4 2.9
PC228US-3E0, PC228USLC-3E0, PC228US-3, PC228USLC-3 (7'10") (9'6")
0.50 (0.65) 0.45 (0.59) 750 (29.5") 885 (34.8") 478 (1,050)
0.60 (0.78) 0.55 (0.72) 870 (34.3") 974 (38.4") 536 (1,180)
0.80 (1.05) 0.70 (0.92) 1045 (41.1") 1150 (45.3") 626 (1,380)
0.90 (1.18) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 678 (1,490)
1.05 (1.37) 0.90 (1.18) 1330 (52.4") 1435 (56.5") 757 (1,670)
2.9
PC228US-3*6, PC228USLC-3*6 (9'6")
0.48 (0.63) — 600 (23.6") — 480 (1058)
0.55 (0.72) — 700 (27.6") — 530 (1168)
0.63 (0.82) — 800 (31.5") — 580 (1279)
0.71 (0.93) — 900 (35.4") — 610 (1345)
0.78 (1.02) — 1000 (39.4") — 650 (1433)
0.86 (1.15) — 1100 (43.3") — 700 (1543)
0.96 (1.26) — 1200 (47.2") — 760 (1675)
1.03 (1.35) — 1300 (51.2") — 810 (1786)
1.11 (1.45) — 1400 (55.1") — 870 (1918)
1.19 (1.56) — 1500 (59.1") — 930 (2050) (LC: )
1.49 (1.95) — 1600 (63.0") — 1100 (2425) (LC: )
1.58 (2.07) — 1700 (66.9") — 1150 (2535)
1.68 (2.20) — 1800 (70.9") — 1200 (2645)
* Without side cutters *4 Heavy-duty bucket For the source of each model, see the tables from 2A-14 to 2A-26.
** UK source *5 China source
*** USA source *6 For UK
2A-89
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
1.8 2.4 2.9
PC230NHD-8 (5'11") (7'10") (9'6")
0.43 (0.56) — 600 (23.6") — 570 (1257)
0.525 (0.69) — 700 (27.6") — 605 (1334)
0.63 (0.82) — 800 (31.5") — 650 (1433)
0.73 (0.95) — 900 (35.4") — 690 (1521)
0.84 (1.10) — 1000 (39.4") — 740 (1631)
0.94 (1.23) — 1100 (43.3") — 820 (1808)
1.05 (1.37) — 1200 (47.2") — 850 (1874)
1.16 (1.52) — 1300 (51.2") — 880 (1940)
1.26 (1.65) — 1400 (55.1") — 950 (2094)
1.37 (1.79) — 1500 (59.1") — 1000 (2205)
1.49 (1.95) — 1600 (63.0") — 1100 (2425)
1.58 (2.07) — 1700 (66.9") — 1150 (2535)
2.0 2.5 3.0 3.5
PC240LC-8, PC240NLC-8 (6'7") (8'2") (9'10") (11'6")
0.47 (0.61) 600 (23.6") 670 (1480)
0.70 (0.92) 800 (31.5") 750 (1650)
0.93 (1.22) 1000 (39.4") 840 (1850)
1.17 (1.53) 1200 (47.2") 960 (2120)
1.41 (1.53) 1400 (55.1") 1050 (2310) (NLC: )
1.53 (2.00) 1500 (59.1") 1120 (2470) (NLC: ) (NLC: ) (NLC: )
1.65 (2.17) 1600 (63.0") 1170 (2580) (NLC: ) (NLC: ) (NLC: )
1.79 (2.34) 1800 (70.9") 1250 (2760) (NLC: ) (NLC: )
1.89 (2.47) 2000 (78.7") 1300 (2870) (NLC: )
2.5 3.0 3.5
PC270-8, PC270LC-8 (8'2") (10'0") (11'6")
1.26 (1.65) 1.10 (1.44) 1400 (55.1") 1505 (59.3") 845 (1860)
3.05
PC270-7*5 (10'0")
1.3 (1.70) — 1420 (55.9") 1540 (60.6") 1140 (2513)
1.3 (1.70)*4 — 1435 (56.5") 1500 (59.0") 1375 (3031)
* Without side cutters For the source of each model, see the tables from 2A-14 to 2A-26.
** UK source
*** USA source
*4 Heavy-duty bucket
*5 China source
*6 For UK
2A-90
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
cutters cutters m (ft.in)
m3 (cu.yd) m3 (cu.yd) (With side cutters)
mm (in) mm (in)
3.05 3.5
PC270LC-8*** (10') (11'6")
0.58 (0.76) — 610 (24") — 765 (1686)
0.78 (1.02) — 762 (30") — 774 (1707)
0.99 (1.29) — 914 (36") — 869 (1915)
1.20 (1.57) — 1067 (42") — 949 (2092)
1.41 (1.85) — 1219 (48") — 1045 (2304)
2.0 2.5 3.05 3.5
PC290LC-8**, PC290NLC-8** (6'7") (8'2") (10') (11'6")
0.85 (1.11) — 800 (31.5") — 890 (1960)
1.13 (1.48) — 1000 (39.4") — 1010 (2230)
1.42 (1.86) — 1200 (47.2") — 1160 (2560)
1.74 (2.28) — 1400 (55.1") — 1290 (2840)
1.87 (2.45) — 1500 (59.1") — 1350 (2980)
2.02 (2.64) — 1600 (63.0") — 1400 (3090)
2.2 2.55 3.185 4.02
PC300-7, PC300LC-7, PC300-7E0, PC300LC-7E0 (7'3") (8'4") (10'5") (13'2")
0.52 (0.68) 0.48 (0.63) 610 (24") 740 (29.1") 664 (1460)
1.14 (1.49) 1.00 (1.31) 1145 (45.1") 1275 (50.2") 900 (1980)
1.40 (1.83) 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1015 (2240)
1.40 (1.83)** 1.20 (1.57) 1458 (54.7") — 1508 (3320)
1.60 (2.09) 1.40 (1.83) 1515 (59.6") 1645 (64.8") 1102 (2430)
1.80 (2.35) 1.60 (2.09) 1700 (66.9") — 1115 (2460)
2.22 3.185
PC300SE-7 (7'3") (10'5")
0.52 (0.68) 0.48 (0.63) 610 (24") 740 (29.1") 664 (1460)
1.14 (1.49) 1.00 (1.31) 1145 (45.1") 1275 (50.2") 900 (1980)
1.40 (1.83) 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1015 (2240)
1.40 (1.83)*6 1.20 (1.57) 1458 (54.7") — 1508 (3320)
2.10 (2.74)*7 1.90 (2.48) 1565 (61.6") 1685 (66.3") 1725 (3802")
2.54 3.19 4.02
PC300LC-7E0***, PC300HD-7E0 (8'4") (10'5") (13'2")
0.68 (0.89) — 610 (24") — 878 (1935)
0.93 (1.21) — 762 (30") — 1012 (2230)
1.18 (1.54) — 914 (36") — 1102 (2430)
1.44 (1.88) — 1067 (42") — 1221 (2691)
1.70 (2.22) — 1219 (48") — 1308 (3146)
1.96 (2.56) — 1372 (54") — 1427 (3146)
3.185 —
PC350-7, PC350LC-7, PC350-7E0, PC350LC-7E0 (10'5")
1.40 (1.83)*6 1.20 (1.57) 1458 (54.7") — 1508 (3320) —
2.2 2.55 3.185 4.02
PC300-7*5 (7'3") (8'4") (10'5") (13'2")
1.40 (1.83) 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1012 (2231)
1.40 (1.83)*6 1.20 (1.57) 1340 (52.8") 1445 (56.9") 1301 (2868)
1.60 (2.09) 1.40 (1.83) 1515 (59.6") 1645 (64.8") 1196 (2637)
3.045 3.5 4.2
PC308USLC-3E0 (10'0") (11'6") (13'9")
0.58 (0.76) — 610 (24") — 765 (1686)
0.78 (1.02) — 762 (30") — 774 (1707)
0.99 (1.29) — 914 (36") — 869 (1915)
1.20 (1.57) — 1067 (42") — 949 (2092)
1.41 (1.85) — 1219 (48") — 1045 (2304)
1.63 (2.13) — 1372 (54") — 1142 (2518)
* Without side cutters *5 China source
** UK source *6 Rock bucket For the source of each model, see the tables from 2A-14 to 2A-26.
*** USA source *7 Not recommended for rock
digging without ripping/blasting
2A-91
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width
Weight
Without side With side Arm length
SAE, PCSA CECE kg (lb)
3 3 cutters cutters m (ft.in)
m (cu.yd) m (cu.yd) (With side cutters)
mm (in) mm (in)
2.22 2.55 3.19 4.02
PC340LC-7E0, PC340NLC-7E0 (7'3") (8'4") (10'5") (13'2")
0.85 (1.11) — 800 (31.5") — 880 (1940)
1.13 (1.48) — 1000 (39.4") — 1010 (2230)
1.42 (1.86) — 1200 (47.2") — 1160 (2560)
1.75 (2.29) — 1400 (55.1") — 1290 (2840)
1.87 (2.45) — 1500 (59.1") — 1350 (2980)
2.02 (2.64) — 1600 (63.0") — 1400 (3090)
2.32 (3.03) — 1800 (70.9") — 1520 (3350)
2.2 2.55 3.185 4.02
PC360-7*5 (7'3") (8'4") (10'6") (13'2")
1.6 (2.09) 1.40 (1.83) 1515 (59.6") 1633 (64.3") 1615 (3560)
2.2 2.55 3.185 4.02
PC380LC-7 (7'3") (8'4") (10'5") (13'2")
1.12 (1.46) — 1000 (39.4") — 873 (1925)
1.38 (1.81) — 1200 (47.2") — 977 (2154)
1.65 (2.16) — 1400 (55.1") — 1062 (2341)
1.79 (2.34) — 1500 (59.1") — 1104 (2434)
1.92 (2.51) — 1600 (63.0") — 1166 (2571)
2.12 (2.77)*6 — 1750 (68.9") — 1230 (2712)
2.38 (3.11) — 1750 (70.9") — 1450 (3197)
2.54 (3.32) — 1850 (72.8") — 1820 (4012)
2.4 2.9 3.38 4.0
PC400-7, PC400LC-7, PC400-7E0, PC400LC-7E0 (7'10") (9'6") (11'1") (13'1")
1.30 (1.70) 1.20 (1.57) 1120 (44.1") 1270 (50") 1115 (2458)
1.60 (2.09) 1.40 (1.83) 1270 (50") 1420 (55.9") 1197 (2639)
1.90 (2.49) 1.70 (2.22) 1475 (58.1") 1625 (64") 1358 (2873)
1.90 (2.49)*6 1.70 (2.22) — 1625 (64") 1966 (3757)
2.06 (2.69) 1.80 (2.35) 1565 (61.6") 1715 (67.5") 1391 (3067)
2.10 (2.75)*6 1.90 (2.49) — 1745 (68.7") 2035 (4490)
2.20 (2.88) 2.00 (2.62) 1715 (67.5") — 1396 (3757)
2.4 2.9 3.38 4.0 4.8
PC400LC-7E0*** (7'10") (9'6") (11'1") (13'1") (15'9")
1.12 (1.47) — 762 (30") — 1266 (2790)
1.35 (1.76) — 914 (36") — 1393 (3072)
1.64 (2.15) — 1067 (42") — 1536 (3386)
1.94 (2.54) — 1219 (48") — 1646 (3629)
2.25 (2.94) — 1372 (54") — 1790 (3947)
2.55 (3.34) — 1524 (60") — 1903 (4195)
2.87 (3.75) — 1676 (66") — 2045 (4509)
2.4 —
PC400LCSE-7 (7'10")
2.8 (3.66) — 1565 (61.6") 1715 (67.5") 1765 (3891) —
3.2 (4.19) — 1785 (70.3") 1935 (76.2") 1902 (4193) —
3.38 —
PC450-7, PC450LC-7, PC450-7E0, PC450LC-7E0 (11'1")
1.90 (2.49) 1.70 (2.22) — 1625 (64.0")*7 1966 (4330) —
2.10 (2.75)*6 1.90 (2.49) — 2035 (68.7")*7 2035 (4490) —
2.4 2.9 3.38 4.0 4.8
PC450-7E0**, PC450LC-7E0** (7'10") (9'6") (11'1") (13'1") (15'9")
1.34 (1.75) — 1000 (39.4") — 1450 (3197)
1.69 (2.4) — 1200 (47.2") — 1650 (3638)
2.20 (2.88) — 1500 (59.0") — 1940 (4277)
2.40 (3.14) — 1600 (63.0") — 2040 (4497)
2.76 (3.61) — 1800 (70.9") — 2180 (4806)
6.6 7.3 7.66
(21'9") (23'11") (25'2")
2.9 3.5 3.5 4.3 5.2
PC600-8, PC600LC-8 (9'6") (11'6") (11'6") (14'1") (17'1")
2.0 (2.62) 1.8 (2.35) 1250 (49.2") 1430 (56.3") 2130 (4700) — —
2.3 (3.01) 2.1 (2.75) 1400 (55.1") 1580 (62.2") 2260 (4980) — —
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1780 (70.1") 2430 (5360) — —
2.8 (3.66) 2.5 (3.27) 1920 (75.6") 1920 (75.6") 3100 (6830) — — — — —
3.1 (4.05) 2.8 (3.66) 2040 (80.3") 2000 (78.7") 3210 (7080) *9
3.5 (4.58) 3.1 (4.05) 2110 (83.1") 2110 (83.1") 3280 (7230) — — — —
* Without side cutters *6 Quarry bucket
** UK source *7 With side shrouds
*** USA source *8 Bucket lip width
*5 China source *9 Installed to LC crawler
2A-92
Bucket and Arm EXCAVATORS
Combinations (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 2.1 t/m3 (3500 lb/cu.yd)
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Boom length m (ft, in)
Weight
Without side With side kg (lb)
SAE, PCSA CECE Arm length
3 3 cutters cutters (With side cutters)
m (cu.yd) m (cu.yd) m (ft.in)
mm (in) mm (in)
6.6 7.3 7.66
(21'9") (23'11") (25'2")
2.9 3.5 3.5 4.3 5.2
PC600-7, PC600LC-7 (9'6") (11'6") (11'6") (14'1") (17'1")
2.0 (2.62) 1.8 (2.35) 1250 (49.2") 1430 (56.3") 2200 (4850) — —
2.3 (3.01) 2.1 (2.75) 1400 (55.1") 1580 (62.2") 2382 (5250) — —
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1780 (70.1") 2505 (5520) — —
2.8 (3.66) 2.5 (3.27) 1870 (73.6") 1870 (73.6")*8 2981 (6570) — — — —
3.1 (4.05) 2.8 (3.66) 2000 (78.7") 2000 (78.7")*8 3100 (6830) *9
3.5 (4.58) 3.1 (4.05) 2120 (83.5") 2120 (83.5")*8 3406 (7510) — — — —
6.6 7.3 7.3
(21'9") (23'11") (23'11")
2.9 3.5 2.9
PC600-8** (9'6") (11'6") (9'6")
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
7.66 7.66
(25'2") (25'2")
2.9 3.5
PC600LC-8** (9'6") (11'6")
2.4 (3.14) 2.1 (2.75) 1320 (52.0") 1400 (55.1") 2410 (5310)
2.7 (3.53) 2.4 (3.14) 1600 (63.0") 1680 (66.1") 2795 (6160)
2.8 (3.66) 2.5 (3.27) 1655 (65.2") 1705 (67.1") 2795 (6162)
3.5 (4.58) 3.1 (4.05) 1850 (72.8") 1900 (74.8") 3325 (7330)
3.6 4.6 5.6
PC750-7, PC800-8 (11'10") (15'1") (18'4")
2.8 (3.66) 2.5 (3.27) 1550 (61") 1695 (66.7") 2740 (6040)
3.1 (4.05) 2.8 (3.66) 1700 (66.9") 1880 (74.0") 2960 (6530)
3.4 (4.45) 3.0 (3.92) 1820 (71.7") 1920 (75.6") 3500 (7720)
2.945
PC750SE-6, PC800SE-8 (9'8")
4.0 (5.23) 3.5 (4.58) 2000 (78.7") 2100 (82.8") 3435 (7570)
4.3 (5.62) 3.8 (4.97) 2150 (84.6") 2250 (88.7") 3870 (8530)
4.5 (5.89) 4.0 (5.23) 2230 (87.8") 2330 (91.7") 4050 (8930)
3.6
PC800-7, PC850-8 (11'10")
3.4 (4.45) 3.0 (3.92) 1820 (71.7") 1870 (73.6") 3500 (7720)
2.945 3.6
PC800SE-7, PC850SE-8 (9'8") (11'10")
4.0 (5.23)*9 3.5 (4.58) 2000 (78.7") 2105 (82.9") 4000 (8820)
4.0 (5.23) 3.5 (4.58) 2000 (78.7") 2105 (82.9") 3435 (7570)
4.3 (5.62) 3.8 (4.97) 2150 (84.6") 2255 (88.8") 3870 (8530)
4.5 (5.89) 4.0 (5.23) 2230 (87.8") 2330 (91.9") 4050 (8930)
2.92 3.6
PC800SE-8**, PC800LC-8** (9'7")*7 (11'10")*8
3.6 (4.71) — 1750 (68.9") — 3575 (7880)**
4.0 (5.23) — 1950 (76.8") — 3700 (8160)**
4.4 (5.75) — 2140 (84.3") — 3800 (8380)**
5.1 (6.67) — 2480 (97.6") — 3925 (8650)**
5.6 (7.32) — 2730 (107.5") — 4025 (8870)**
6.0 (7.85) — 2920 (115.4") — 4100 (9040)**
8.2 10.0 7.1
(26'11") (32'10") (23'4")
3.6 4.6 5.6 4.6 5.6 2.9
PC800LC-8*** (11'10") (15'1") (18'4") (15'1") (18'4") (9'8")
1.70 (2.23) — 914 (36") — 2544 (5609)
2.09 (2.73) — 1067 (42") — 2732 (6023)
2.48 (3.25) — 1219 (48") — 2998 (6610)
2.89 (3.78) — 1372 (54") — 3190 (7032)
3.29 (4.31) — 1524 (60") — 3456 (7619)
3.71 (4.85) — 1676 (66") — 3652 (8052)
4.12 (5.39) — 1829 (72") — 3919 (8639)
4.53 (5.93) — 1981 (78") — 4115 (9072)
2A-93
Teeth Features EXCAVATORS
and Teeth Selection (BACKHOE)
These charts are based on over-side stability with fully loaded bucket at maximum reach.
General purpose use, weight up to 2.1 t/m3 (3500 lb/cu.yd)
General purpose use, weight up to 1.8 t/m3 (3000 lb/cu.yd)
General purpose use, weight up to 1.5 t/m3 (2500 lb/cu.yd)
Light duty work, weight up to 1.2 t/m3 (2000 lb/cu.yd)
Not usable.
Bucket capacity (heaped) Width Weight
Without side With side kg (lb) Boom length + Arm length
SAE, PCSA CECE (With side m (ft.in)
cutters cutters*
m3 (cu.yd) m3 (cu.yd) mm (in) mm (in) cutters)
3.4 4.5 5.7
PC1250-7, PC1250LC-7, PC1250-8 (11'2") (14'9") (18'8")
3.4 (4.4) 3.0 (3.9) 1500 (59.1") 1670 (65.7") 3600 (7940)*9 —
4.0 (5.2) 3.5 (4.6) 1710 (67.3") 1880 (74") 3800 (8380)*9
5.0 (6.5) 4.3 (5.6) 2050 (80.7") 2220 (87.4") 4400 (9700)*9 —
5.2 (6.8) 4.5 (5.9) 2050 (80.7") 2110 (83.1") 5100 (11240) — —
3.4
PC1250SP-7 (11'2")
6.7 (8.8) 5.9 (7.7) 2280 (89.8") 2340 (92.1") 6000 (13230)*9
3.4
PC1250SP-8 (11'2")
9
6.7 (8.8) 5.9 (7.7) 2280 (89.8") 2340 (92.1") 6300 (13890)*
8.7 + 3.9 9.1 + 4.1 11.4 + 5.0
PC1800-6 (28'7" + 12'10") (29'10" + 13'5") (37'5" + 16'5")
5.6( 7.3) 5.0 (6.5) 1770 (69.7") 1930 (76") 7570 (16690) *
8.5 (11.1) 7.6 (9.9) 2240 (88.2") 2400 (94.5") 9390 (20700) *
10.1 (13.2) 9.0 (11.8) 2540 (100") 2700 (106") 9600 (21160)
11.0 (14.4) 9.8 (12.8) 2540 (100") 2590 (102") 9370 (20660) —
12.0 (15.7) 11.0 (14.4) 2720 (107") 2770 (109") 9985 (22010) — —
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Heavy duty work
General digging and loading
Light material work
Bucket capacity (heaped) Width Weight
kg (lb)
Without side With side (With side Boom length + Arm length
SAE, PCSA CECE m (ft.in)
cutters cutters** cutters and
m3 (cu.yd) m3 (cu.yd) mm (in) mm (in) wp-2**)
8.6 + 4.0
PC3000-6 (28'3"+ 13'1")
15 (19.5) 13.3 (17.4) 3400 (134") 3400 (134") 15600 (34400)
9.75 + 4.5
PC4000-6 (32'0"+ 14'9")
22 (28.8) 19 (24.9) 3800 (150") 3800 (150") 23300 (51370)
10 + 5.1
PC5500-6 (32'10"+ 16'9")
28 (36.6) 24.3 (31.8) 4220 (166") 4220 (166") 30400 (64020)
11.5 + 5.5
PC8000-6 (37'9"+ 18'1")
38 (50) 33 (43.2) 4830 (190") 4830 (190") 45500 (100300)
42 (55) 36.5 (47.7) 4780 (188") 4780 (188") 40300 (88850)
2A-94
Teeth Selection EXCAVATORS
(BACKHOE)
Teeth Features
1) Long-life bucket tooth:
Fits the work site where wear resistance of the tooth is required because it must be used to collect sand
and gravel.
2) Self-sharpened bucket tooth:
Fits the work site where penetration ease of the tooth is required because it must be used to dig rock and
clay after blasting.
3) Super self-sharpened bucked tooth:
Fits the work site where penetration ease better than above is required because it must be used to dig
rock after blasting.
4) Standard bucket tooth:
Fits other general work sites.
Teeth Selection
1. Teeth designed by Komatsu
Vertical pin type Horizontal pin type
Self- Self- Super self-
Standard Long-life Standard Long-life
sharpened sharpened sharpened
tooth tooth tooth tooth
tooth tooth tooth
PC120-6
—
up to PC210-7
PC220-7
—
up to PC380-7
PC400-7
—
PC450-7
PC750-7
— — —
PC800-7
PC1250-7 — — — —
: Available
2A-95
Teeth Selection EXCAVATORS
(BACKHOE)
2. HENSLEY teeth
1) KMAX and XS TEETH SELECTION for EXCAVATORS
2A-96
Teeth Selection EXCAVATORS
(BACKHOE)
2) Series Recommendation Chart - Hydraulic Sxcavators/Shovels
DEFINITIONS
Standard / Heavy Duty - The load on the machine ranges from very little to moderate with some limited, “high load” use.
Materials range from light and loose, well-shot, fracturable, to some medium, even heavy shot materials that break up into
manageable sizes when excavated. Large slabs of rock do not fit in this category.
Extreme Service ? The load on the machine is high, nearing the maximum capabilities of the machine. Materials are heavy un-
shot rock or slabs that require the full force of the machine to break out.
2A-97
Teeth Selection EXCAVATORS
(BACKHOE)
3) Tooth Application Chart - Hydraulic Excavators/Shovels
2A-98
Teeth Selection EXCAVATORS
(BACKHOE)
3. KVX teeth
1) Features
1) Long service life of teeth
Free-turning teeth mean long-lasting resistance to wear (some specifications excluded).
2) Excellent wear resistance using Sagitta steel
Based on 130 years of experience in advanced heat-processing technology, teeth and lip plate (base
edge) are afforded optimum wear resistance and hardness.
3) Tooth system without adapter
Teeth are affixed using secure bolts, meaning that no adapter is employed. Problems such as cracks do
not occur. Since teeth are of a uniform thickness, excavation wear resistances do not change.
4) The same Sagitta steel is employed for the lip plate and teeth.
Special steel (Brinell hardness 520 Sagitta steel) is employed for the lip plate, rendering reinforcement
of the rip plate unnecessary. This means a marked reduction in reinforcement costs is possible.
2) Teeth specification
T T T T
W1 W2 W1 W2 W1 W2 W1 W2
L L L L
T T T T
W1 W1 W2 W1 W2 W1 W2
L L L L
FVBH0189
2A-99
Model Selection EXCAVATORS
(BACKHOE)
1. Basic idea for excavator selection
The concept of the combination of bucket size, arm length, and boom length for hydraulic excavators to
match the nature of the operation is as follows.
Main-types of work Combination
Boom/Arm + Bucket
Long boom
Long arm + Small capacity bucket
FVBH0242
2) Larger production
Short boom
Short arm + Large capacity bucket
FVBH0243
FVBH0244
4) Heavy-duty work
Strengthened boom
Strengthened arm + Heavy-duty bucket
FVBH0245
2. Wrong combination
Wrong
1) Long Arm with Large Capacity Bucket
If the machine is operated with a long arm and a
large capacity bucket with a capacity larger than
recommended, the machine will become unstable,
and it will also lose digging power, so the operating
efficiency will drop. In particular, if a strong shock
load is applied to the bucket, there is danger that the
arm may break.
FVBH0246
2) Additional Counterweight
If an excessive capacity bucket or heavy attachment Wrong
is installed, the machine will become unstable, so it
is common to see additional counterweights used.
However, this means that an excessive load is
applied not only to the work equipment and
undercarriage, but also to the whole machine, so this
will lead to a reduction in the service life of the
machine.
FVBH0247
2A-100
Model Selection EXCAVATORS
(BACKHOE)
3. Concepts for selection of backhoe type and loading shovel for large hydraulic excavators
2) Digging function
Loading shovel : This is better for loading blasted rocks where there are many large lumps and digging force
is required. When digging flat surfaces, its horizontal pushing force is strong and it can
show its power, but it is difficult for it to use its pushing force when digging above ground
level.
Backhoe : This is an all-round attachment for digging and loading. When increasing the bucket size to
ensure production volume, make the work equipment (arm, boom) shorter.
(Note: Digging a
(Note: Digging
slope a
and loading)
slope and loading)
Blasted rock
Blasted rock
Natural
ground Natural
Natural
ground Natural
ground
ground About 20º Deep
Blasted rock
Short
Long Blasted rock Deep
Short
Long
Long FVBH0249
Long
NOTE: The bucket size depends on the specific gravity (loose) of the material loaded. For details, see
Bucket and Arm Combination.
2A-101
Model Selection EXCAVATORS
(BACKHOE)
HYDRAULIC EXCAVATOR AND DUMP TRUCK COMBINATION
2A-102
Model Selection EXCAVATORS
(BACKHOE)
HYDRAULIC EXCAVATOR AND DUMP TRUCK COMBINATION
: SUITABLE : POSSIBLE
HYDRAULIC EXCAVATOR OFF-HIGHWAY DUMP TRUCK
HD465 HD605 HD785 HD985 HD1500 630E 730E 830E 930E
2A-103
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
11 (m) 12 (m)
10 11
9 10
9
8
8
7
7
6
6
5
5
4 4
3 3
2 2
1 1
G.L. 0 G.L.
0
1 1
2
2
45 3
3
3.5 45 4
4
5
5
6
6 7
7 8
8 9
12 11 10 9 8 7 6 5 4 3 2 1 0 13 12 11 10 9 8 7 6 5 4 3 2 1 0
(m) FVBH0270 (m) FVBH0314
2A-104
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
Normal rock-loading operations:
Loading machine: PC800-7, PC850-8
Dump truck: HD325-6
14 (m)
13
12
PC850-8 :STD 11
PC800-7 :STD
10
9
8
PC850-8 :SE
PC800-7 :SE 7
6
5
4
3
2
1
0
1
2
3
45 4
4.5 :SE
5
5.5 :STD
6
7
8
9
10
11
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
(m) FVBH0317
2A-105
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
7
6
5
4
3
2
1
0
1
0.5 2
3
60 4
5
5.5
6
7
8
9
11
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FVPM2976
2A-106
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
Normal rock-loading operations:
Loading machine: PC4000-6
Dump truck: 730E
[ft] [m]
57
17
54
16
51
15
48
45 14
42 13
39 12
36 11
33 10
30 9
27 8
24 7
21
6
18
5
15
4
12
9 3
6 2
3 1
0 0
-3 -1
-6 -2
-9 -3
-12
-4
-15
-5
-18
-6
-21
-24 -7
-27 -8
-30 -9
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 [ft]
69 63 63 60 57 54 51 48 45 42 39 36 33 30 27 24 21 18 15 12 9 6 3 0 [m]
2A-107
Model Selection EXCAVATORS
(BACKHOE)
WORKING RANGE AND LOAD HEIGHT
Normal rock-loading operations: [m] [ft]
Loading machine: PC8000-6 20 66
63
Dump truck: 930E 19
60
18
57
17
54
16
51
15
48
14 45
13 42
12 39
11 36
10 33
9 30
8 27
7 24
21
6
18
5
15
4
12
3 9
2 6
1 3
0 0
-1 -3
-2 -6
-3 -9
-12
-4
-15
-5
-18
-6
-21
-7 -24
-8 -27
-9 -30
-10 -33
[m] 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
[ft] 0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81
2A-108
Production EXCAVATORS
(BACKHOE)
Estimated Hourly Production
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 0.2 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3
10.0 0.17 72 108 180 252 324
11.0 0.18 65 98 164 229 295 360 425 491
12.0 0.20 60 90 150 210 270 330 390 450 510 570 630 690 750
13.0 0.22 55 83 138 194 249 305 360 415 471 526 582 637 692 748 803 858 914 969 1025 1080 1135
15.0 0.25 48 72 120 168 216 264 312 360 408 456 504 552 600 648 696 744 792 840 888 936 984 1032
17.0 0.28 42 64 106 148 191 233 275 318 360 402 445 487 529 572 614 656 699 741 784 826 868 911
19.0 0.32 38 57 95 133 171 208 246 284 322 360 398 436 474 512 549 587 625 663 701 739 777 815
21.0 0.35 34 51 86 120 154 189 223 257 291 326 360 394 429 463 497 531 566 600 634 669 703 737
24.0 0.40 30 45 75 105 135 165 195 225 255 285 315 345 375 405 435 565 595 525 555 585 615 645
27.0 0.45 27 40 67 93 120 147 173 200 227 253 280 307 333 360 387 413 440 467 493 520 547 573
30.0 0.50 24 36 60 84 108 132 156 180 204 228 252 276 300 324 348 372 396 420 444 468 492 516
35.0 0.58 175 195 216 237 257 278 298 319 339 360 381 401 422 442
40.0 0.67 279 297 315 333 351 369 387
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 4.5 4.7 4.9 5.1 5.3 5.5 5.7 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0
15.0 0.25 1080 1128 1176 1224 1272 1320 1368
17.0 0.28 953 995 1038 1080 1122 1165 1207
19.0 0.32 853 891 928 966 1004 1042 1080 1137 1231 1326 1421 1516 1611 1705 1800 1895 1989 2084 2179 2274
21.0 0.35 771 806 840 874 909 943 977 1028 1114 1200 1286 1371 1457 1543 1629 1714 1800 1886 1971 2057
24.0 0.40 675 705 735 765 795 825 855 900 975 1050 1125 1200 1275 1350 1425 1500 1575 1650 1725 1800
27.0 0.45 600 627 653 680 707 733 760 800 867 933 1000 1067 1133 1200 1267 1333 1400 1467 1533 1600
30.0 0.50 540 564 588 612 636 660 684 720 780 840 900 960 1020 1080 1140 1200 1260 1320 1380 1440
35.0 0.58 463 483 504 525 545 566 586 617 668 720 771 823 874 926 977 1029 1080 1131 1183 1234
40.0 0.67 405 423 441 459 477 495 513 540 585 630 675 720 765 810 855 900 945 990 1035 1080
45.0 0.75 480 520 560 600 640 680 720 760 800 840 880 920 960
ESTIMATED
CYCLE BUCKET SIZE** (CU.M) OR (CU.YD)
TIME
SEC. MIN. 12.5 13.0 13.5 14.0 15.0 16.0 18 20 22 25 28 30 35 38 40
15.0 0.25
17.0 0.28
19.0 0.32 2368 2463
21.0 0.35 2143 2229 2314 2400 2571
3085 3031
24.0 0.40 1875 1950 2025 2100 2250 2400
2700 3000 3300 3750 4200 4500 5250 5700 6000
27.0 0.45 1667 1733 1800 1866 2000 2133
2400 2666 2933 3333 3733 4000 4666 5066 5333
30.0 0.50 1500 1560 1620 1680 1800 1920
2160 2400 2640 3000 3360 3600 4200 4560 4800
35.0 0.58 1286 1337 1388 1440 1543 1645 1851 2057 2263 2571 2880 3085 3600 3908 411ó
4
40.0 0.67 1125 1170 1215 1260 1350 1440 1620 1800 1980 2250 2520 2700 3150 3420 3600
45.0 0.75 1000 1040 1080 1120 1200 1280 1440 1600 1760 2000 2240 2400 2800 3040 3200
Actual production = Estimated Hourly Production × Bucket Fill Factor × Job Efficiency
Bucket fill factor (K) (PC78~PC1800) Job efficiency (E)
Excavating conditions K Excavating conditions E
Easy excavating 1.1 ~ 1.2 Good 0.83
Average excavating 1.0 ~ 1.1 Average 0.75
Rather difficult excavating 0.8 ~ 0.9 Rather poor 0.67
Difficult excavating 0.7 ~ 0.8 Poor 0.58
2A-109
MEMO
SECTION 2B
MINIMAL SWING RADIUS
EXCAVATORS (UU)
UU stands for “Ultra Urban” machine.
CONTENTS
Features .................................................................... 2B-3
Specifications ........................................................... 2B-4
Dimensions ............................................................... 2B-5
Working ranges and digging force ......................... 2B-6
Lifting apacity ........................................................... 2B-7
2B-1
MINIMAL SWING RADIUS
EXCAVATORS (UU)
Minimal Swing Radius Excavator means the excavator having an upper structure with its equipment and
attachments swinging within 120% of the width of the undercarriage. (Defined by ISO 6165)
UU stands for “Ultra Urban” machine named by Komatsu and equivalent to Minimal Swing Radius Excavator.
B<A
C Z 1.2A
B C
2B-2
Features MINIMAL SWING RADIUS
EXCAVATORS (UU)
Wide working ranges and small swing radius
• The small swing radius of the work equipment facilitates operations even in confined spaces
• Easy side ditching with large offset width
• The largest working range in this class
• Largest digging force in its class
2B-3
Specifications MINIMAL SWING RADIUS
EXCAVATORS (UU)
Model
PC58UU-3 PC78UU-6 PC128UU-2
Item
OPERATING WEIGHT* kg (lb) 5290 (11,670) 7670 (16,910) 13580 (29,940)
HORSEPOWER: (SAE) kW (HP)/RPM 29.4 (39)/2400 40.5 (54)/1850 64 (86)/2200
BUCKET CAPACITY RANGE 0.055~0.22 0.09~0.34 0.18~0.50
(SAE) m3 (cu.yd) (0.07) (0.29) (0.12) (0.44) (0.24) (0.65)
PERFORMANCE:
Swing speed RPM 10.0 10.0 10.0
Max. travel speed km/h (MPH) Hi 4.5 (2.8) Hi 4.5 (2.8) Hi 4.6 (2.9)
Lo 2.7 (1.7) Lo 3.0 (1.9) Lo 3.2 (2.0)
DIMENSIONS:
(see the page of dimensions)
Front swing radius 1060(3'5") 1200 (3'11") 1345 (4'5")
mm (ft.in)
Offset width L:910 (3') L:1030 (3'5") L:1170 (3'10")
R:730 (2'5") R:1065 (3'6") R:1150 (3'9")
Tail swing radius 1035 (3'5") 1240 (4'1") 1480 (4'10")
ENGINE: KOMATSU KOMATSU KOMATSU
Model 4D88E S4D95LE S4D102E
No. of cylinders- mm 4-88 × 90 4-95 × 115 4-102 × 120
bore × stroke (in) (3.46 × 3.54) (3.74 × 4.53) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 2.19 (134) 3.92 (239) 3.92 (239)
HYDRAULIC SYSTEM: 2 × Variable piston 2 × Variable piston 1 × Variable piston
Hydraulic pump 1 × Gear pump 1 × Gear pump 1 × Gear pump
Max. oil flow ltr. (U.S. Gal)/min. 135 (35.9) 160 (42.2) 226.5 (59.7)
Max. oil pressure kg/cm2 (PSI) 265 (3770) 270 (3840) 355 (5050)***
Track shoe width/ mm (in)/ 400 (16")/ 450 (18")/ 600 (24")/
ground pressure kg/cm2 (PSI) 0.31 (4.4) 0.33 (4.7) 0.36 (5.1)
CAPACITY (Refilled):
Fuel tank ltr.(U.S. Gal) 80 (21.1) 125 (33) 200 (52.8)
Hydraulic oil tank 36 (9.5) 64 (16.9) 69 (18.2)
*: MACHINE SPEC.
• Bucket (SAE) 0.22 (0.29) 0.28 (0.37) 0.45 (0.59)
m3 (cu.yd)
• Upper attachment Cab Cab Cab
• Track shoe Rubber shoe Triple grouser Triple grouser
* Operating weight includes coolant, lubricants, full fuel tank, operator 80 kg (180 lb) and, indicated implement, shoes and upper
attachment.
*** Travel circuit
2B-4
Dimensions MINIMAL SWING RADIUS
EXCAVATORS (UU)
E L
K
C
G G.L D
I
H A
J B FVBH0028
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm Iength Iength
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
5335 1.62
1910 2470 630 400 1935 2610 320 1600 400 2000 1035 (17'6") 3.41 (5'4")
PC58UU-3
(6'3") (8'1") (2'1") (1'4") (6'4") (8'7") (1'1") (5'3") (16") (6'7") (3'5") 5385 (11'2") 2.07
(17'8") (6'10")
2235 2840 735 470 2330 2730 360 1870 450 2320 1480 6060 3.75 1.72
PC78UU-6
(7'4") (9'4") (2'5") (1'7") (7'8") (8'11") (1'2") (6'2") (18") (7'7") (4'10") (19'11") (12'4") (5'8")
2750 3480 855 590 2490 2730 390 1990 600 2590 1240 7435 4.29 2.13
PC128UU-2
(9') (11'5") (2'10") (1'11") (8') (9') (1'5") (6'5") (20") (8'1") (4'1") (24'1") (14'1") (7')
2B-5
Working Ranges MINIMAL SWING RADIUS
and Digging Forces EXCAVATORS (UU)
F
A E
D
C
FVBH0029
2B-6
Lifting Capacity MINIMAL SWING RADIUS
EXCAVATORS (UU)
L
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
L : Arm length
B Cf : Rating over front
Cs : Rating over side
C MAX: Rating at maximum reach
kg(lb) FVBH0043
PC58UU-3
Conditions:
Boom : 3410 mm (11'12"), Bucket (SAE) : 0.22 m3 (0.29cu.yd), Shoes : 400 mm (16") unit: kg (lb)
A MAX 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1620 mm (5'4") With blade on ground
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m *990 660 *1000 760 *1530 *1530
(10') (2200) (1450) (2200) (1690) (3380) (3380)
0.0 m *1360 500 *1470 650 *2290 *1230 *1400 *1400
(0') (3010) (1110) (3250) (1430) (5060) (2710) (3080) (3080)
-1.5 m *1410 610 *2110 1170 *1050 *610
(5') (3110) (1350) (4660) (2590) (2320) (1350)
Arm length 1620 mm (5'4") With blade above ground
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m 850 660 980 760 *1530 *1530
(10') (1870) (1450) (2170) (1690) (3380) (3380)
0.0 m 670 500 860 650 1630 *1230 *1400 *1400
(0') (1480) (1110) (1910) (1430) (3600) (2710) (3080) (3080)
-1.5 m 820 610 1570 1170
(5') (1800) (1350) (3470) (2590)
Arm length 1620 mm (5'4") With blade on ground, Additional counterweight
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m *990 720 *1000 830 *1530 *1530
(10') (2200) (1580) (2200) (1840) (3380) (3380)
0.0 m *1360 560 *1470 720 *2290 1340 *1400 *1400
(0') (3010) (1230) (3250) (1580) (5060) (2970) (3080) (3080)
-1.5 m *1410 670 *2110 1290 *1050 680
(5') (3110) (1490) (4660) (2850) (2320) (1500)
Arm length 1620 mm (5'4") With blade above ground, Additional counterweight
4.6 m *1030 *1030 *1380 *1380
(15') (2290) (2290) (3050) (3050)
3.0 m 910 720 *1000 830 *1530 *1530
(10') (2020) (1580) (2200) (1840) (3380) (3380)
0.0 m 720 560 940 720 1760 1340 *1400 *1400
(0') (1620) (1230) (2070) (1580) (3880) (2970) (3080) (3080)
-1.5 m 890 670 1700 1290
(5') (1960) (1490) (3760) (2850)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2B-7
Lifting Capacity MINIMAL SWING RADIUS
EXCAVATORS (UU)
PC78UU-6
Conditions:
Boom: 3750 mm (12'4"), Bucket (SAE) : 0.28 m3 (0.37 cu.yd), Shoes : 450 mm (18") unit: kg (lb)
A MAX 5.0 m (16') 4.0 m (13') 3.0 m (9') 2.0 m (6')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1720 mm (5'8") With blade on ground
6.0 m 2150* 2150* 2560* 2560*
(19') (4750) (4750) (5640) (5640)
5.0 m 1810* 1730 2590* 2530
(16') (3990) (3810) (5710) (5590)
4.0 m 1760* 1140 2380* 1430 2750* 2480 3410* 3410*
(13') (3890) (2530) (5260) (3150) (6060) (5480) (7520) (7520)
3.0 m 1830* 890 2550* 1360 3200* 2300 4640* 4640*
(9') (4030) (1970) (5640) (3000) (7050) (5070) (10240) (10240)
2.0 m 1990* 770 2260* 820 2780* 1250 3750* 2030
(6') (4390) (1700) (4990) (1810) (6140) (2770) (8260) (4490)
1.0 m 2200* 720 2290* 770 2940* 1150 4060* 1810
(3') (4850) (1590) (5060) (1700) (6480) (2530) (8950) (3990)
0.0 m 2200* 730 2200* 730 2920* 1070 3970* 1690 2920* 2920*
(0') (4850) (1620) (4850) (1620) (6440) (2370) (8760) (3740) (6440) (6440)
-1.0 m 2160* 830 2650* 1050 3550* 1670 4550* 3490
(-3') (4770) (1840) (5840) (2310) (7840) (3680) (10040) (7710)
-2.0 m 2020* 1110 2760* 1710 3480* 3480*
(-6') (4460) (2440) (6100) (3770) (7680) (7680)
-3.0 m 1340* 1340*
(-9') (2970) (2970)
Arm length 1720 mm (5'8") With blade above ground
6.0 m 2150* 2150* 2560* 2560*
(19') (4570) (4570) (5640) (5640)
5.0 m 1810* 1730 2590* 2530
(16') (3990) (3810) (5710) (5590)
4.0 m 1400 1140 1740 1430 2750* 2480 3410* 3410*
(13') (3090) (2530) (3840) (3150) (6060) (5480) (7520) (7520)
3.0 m 1100 890 1670 1360 2870 2300 4640* 4640*
(9') (2440) (1970) (3690) (3000) (6340) (5070) (10240) (10240)
2.0 m 960 770 1020 820 1560 1250 2580 2030
(6') (2130) (1700) (2260) (1810) (3440) (2770) (5690) (4490)
1.0 m 910 720 970 770 1440 1150 2330 1810
(3') (2010) (1590) (2140) (1700) (3190) (2530) (5140) (3990)
0.0 m 930 730 930 730 1360 1070 2200 1690 2920* 2920*
(0') (2060) (1620) (2060) (1620) (3010) (2370) (4860) (3740) (6440) (6440)
-1.0 m 1060 830 1330 1050 2170 1670 4550* 3490
(-3') (2340) (1840) (2950) (2310) (4800) (3680) (10040) (7710)
-2.0 m 1410 1110 2220 1710 3480* 3480*
(-6') (3110) (2440) (4900) (3770) (7680) (7680)
-3.0 m 1340* 1340*
(-9') (2970) (2970)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
PC128UU-2
Conditions:
Boom: 4290 mm (14'1"), Bucket (SAE): 0.44 m3 (0.58 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 5.5 m (18') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2130 mm (7')
6.1 m 2700* 2700* 3100 2250 3550* 3550*
(20') (6000) (6000) (6900) (4900) (7800) (7800)
3.0 m 2250 1550 2450 1750 3450 2450 5500* 5050
(10') (4900) (3500) (5400) (3800) (7600) (5400) (12200) (11100)
0m 2000 1350 2200 1500 2950 2000 5950 3750
(0') (4400) (3000) (4800) (3300) (6500) (4400) (13100) (8300)
-3.0 m 2750 1900 3000 2050 2450 1650
(-10') (6100) (4200) (6600) (4500) (5400) (3600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2B-8
SECTION 2C
LIFTING CAPACITY
CONTENTS
PC14/16 ..................................................................... 2C-2
PC15/18 ..................................................................... 2C-3
PC20/27/30 ................................................................ 2C-4
PC35/40 ..................................................................... 2C-5
PC50 .......................................................................... 2C-6
PC75 .......................................................................... 2C-7
PC78 .......................................................................... 2C-9
PC100 ...................................................................... 2C-11
PC110 ...................................................................... 2C-12
PC120 ...................................................................... 2C-16
PC130 ...................................................................... 2C-19
PC138 ...................................................................... 2C-22
PC160 ...................................................................... 2C-25
PC180 ...................................................................... 2C-27
PC200 ...................................................................... 2C-29
PC210 ...................................................................... 2C-39
PC220 ...................................................................... 2C-42
PC228 ...................................................................... 2C-50
PC230 ...................................................................... 2C-51
PC240 ...................................................................... 2C-52
PC270 ...................................................................... 2C-54
PC290 ...................................................................... 2C-58
PC300 ...................................................................... 2C-60
PC340 ...................................................................... 2C-73
PC350 ...................................................................... 2C-77
PC380 ...................................................................... 2C-78
PC400 ...................................................................... 2C-79
PC450 ...................................................................... 2C-91
PC600 ...................................................................... 2C-97
PC800 .................................................................... 2C-109
PC750 .................................................................... 2C-112
PC800 .................................................................... 2C-115
PC850 .................................................................... 2C-119
PC1250 .................................................................. 2C-121
PC1800 .................................................................. 2C-126
2C-1
LIFTING CAPACITY
PC14R-2
Conditions:
Bucket (SAE): 0.04 m3 (0.05 cu.yd), Shoes: 230 mm (9") unit: kg (lb)
PC16R-2
Conditions:
Bucket (SAE): 0.04 m3 (0.05 cu.yd), Shoes: 230 mm (9") unit: kg (lb)
A MAX 3.0 m (10') 2.0 m (7')
B Cf Cs Cf Cs Cf Cs
Arm length 965 mm (3'2") Blade on ground
2.0 m *279 172 *286 *286
(7') (615) (380) (630) (630)
1.0 m *284 142 *486 299
(3') (625) (310) (1070) (660)
0m *296 146 *600 278
(0') (650) (320) (1320) (610)
–1.0 m *298 196 *480 281
(–3') (655) (430) (1060) (620)
Arm length 1215 mm (4'0") Blade on ground
2.0 m *242 145 *235 168
(7') (530) (320) (520) (370)
1.0 m *247 122 *276 161 *417 302
(3') (545) (270) (610) (355) (920) (665)
0m *259 125 *317 152 *584 273
(0') (570) (275) (700) (335) (1290) (600)
–1.0 m *266 159 *525 271
(–3') (585) (350) (1160) (600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-2
LIFTING CAPACITY
PC15MRX-1
Conditions:
Boom: 1760 mm (5'7"), Bucket (SAE): 0.044 m3 (0.058 cu.yd), Shoes: 230 mm (9") unit: kg (lb)
PC18MR-2
Conditions:
Boom: 1760 mm (5'7"), Bucket (SAE): 0.044 m3 (0.058 cu.yd), Shoes: 230 mm (9") unit: kg (lb)
A MAX 3.0 m (10') 2.0 m (7')
B Cf Cs Cf Cs Cf Cs
Arm length 965 mm (3'2") Blade on ground with additional counterweight (X-weight)
2.0 m *315 185 *310 205
(7') (690) (410) (680) (450)
1.0 m *320 155 *365 200 *630 373
(3') (700) (340) (800) (440) (1390) (820)
0m *335 160 *410 190 *805 345
(0') (740) (350) (900) (420) (1770) (760)
–1.0 m *340 210 *635 353
(–3') (750) (460) (1400) (780)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-3
LIFTING CAPACITY
PC20MR-2
Conditions: Boom: 1860 mm (6'1"), Bucket (SAE): 0.066 m3 (0.086 cu.yd), Shoes: 250 mm (10") unit: kg (lb)
PC27MR-2
Conditions: Boom: 2200 mm (7'3"), Bucket (SAE): 0.08 m3 (0.105 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
PC30MR-2
Conditions: Boom: 2350 mm (7'9"), Bucket (SAE): 0.09 m3 (0.12 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
2C-4
LIFTING CAPACITY
PC35MR-2
Conditions: Boom: 2560 mm (8'5"), Bucket (SAE): 0.11 m3 (0.14 cu.yd), Shoes: 300 mm (12") unit: kg (lb)
PC40MR-2
Conditions:
Boom: 2740 mm (9'0"), Bucket (SAE): 0.14 m3 (0.18 cu.yd), Shoes: 400 mm (16") unit: kg (lb)
2C-5
LIFTING CAPACITY
PC50MR-2
Conditions:
Boom: 2900 mm (9'6"), Bucket (SAE): 0.16 m3 (0.21 cu.yd), Shoes: 400 mm (16") unit: kg (lb)
2C-6
LIFTING CAPACITY
PC75R-2
A
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
Cf : Rating over front
Cs : Rating over side
B
MAX: Rating at maximum reach
C
FVPM2801
Conditions:
One piece boom: Bucket (SAE): 0.265 m3 (0.35 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
2C-7
LIFTING CAPACITY
PC75R-2
Conditions:
Two piece boom: 3673 mm (12'1"), Bucket (SAE): 0.265 m3 (0.35 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
2C-8
LIFTING CAPACITY
PC78US-6
Conditions:
Boom: 3710 mm (12'2"), Bucket (SAE): 0.28 m3 (0.37 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
2C-9
LIFTING CAPACITY
PC78MR-6
Conditions:
Boom: 3400 mm (11'2") Bucket (SAE): 0.28 m3 (0.37 cu.yd), Shoes: 450 mm (18") unit: kg (lb)
2C-10
LIFTING CAPACITY
2C-11
LIFTING CAPACITY
PC110R-1
Conditions:
One piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-12
LIFTING CAPACITY
PC110R-1
Conditions:
One piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-13
LIFTING CAPACITY
PC110R-1
Conditions:
Two piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-14
LIFTING CAPACITY
PC110R-1
Conditions:
Two piece boom: Bucket (SAE): 0.36 m3 (0.47 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-15
LIFTING CAPACITY
PC120-6
Conditions:
Boom: 4600 mm (15'1"), Bucket (SAE): 0.50 m3 (0.65 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-16
LIFTING CAPACITY
2C-17
LIFTING CAPACITY
2C-18
LIFTING CAPACITY
2C-19
LIFTING CAPACITY
2C-20
LIFTING CAPACITY
PC130-6 MIGHTY
Conditions:
Boom: 4600 mm (15'1''), Bucket (SAE): 0.50 m3 (0.65 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-21
LIFTING CAPACITY
PC138US-2
Conditions:
Boom: 4600 mm (15'1"), Bucket (SAE) 0.45 m3 (0.59 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-22
LIFTING CAPACITY
2C-23
LIFTING CAPACITY
PC138USLC-2
Conditions:
Boom: 4600 mm (15'1"), Bucket (SAE) 0.35 m3 (0.46 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
2C-24
LIFTING CAPACITY
PC160LC-7
Conditions: Boom: 5150 mm (16'11"), Bucket (SAE): 0.65 m3 (0.85 cu.yd), Shoes: 500 mm (20") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (4')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2250 mm (7'5")
7.5 m *2700 *2700
(24') (6000) (6000)
6.0 m *2400 *2400 *3250 2850
(19') (5300) (5300) (7200) (6300)
4.5 m *2350 2050 *4450 2850 *5000 4650
(14') (5200) (4600) (9800) (6200) (11000) (10200)
3.0 m *2450 1800 4450 2700 *6300 4300 *9700 8150
(9') (5400) (4000) (9800) (6000) (13900) (9500) (21400) (18000)
0m 2950 1700 4150 2400 6550 3750 *6750 *6750
(0') (6600) (3800) (9200) (5400) (14500) (8200) (14900) (14900)
–3.0 m 4200 2450 6550 3700 *10500 7100 *10250 *10250
(–9') (9300) (5400) (14500) (8200) (23100) (15700) (22700) (22700)
–4.5 m *4850 4200 *7050 *7050
(–14') (10700) (9200) (15600) (15600)
Arm length 2610 mm (8'7")
7.5 m *2200 *2200
(24') (4900) (4900)
6.0 m *2000 *2000 *3350 2900
(19') (4400) (4400) (7400) (6400)
4.5 m *2000 1900 *4200 2850
(14') (4400) (4200) (9200) (6300)
3.0 m *2050 1650 3050 1800 4500 2750 *5900 4400 *8700 8450
(9') (4600) (3700) (6700) (4000) (9900) (6000) (13000) (9700) (19200) (18600)
0m *2650 1600 2900 1700 4150 2450 6600 3750 *7350 6950
(0') (5900) (3500) (6400) (3700) (9200) (5400) (14600) (8300) (16200) (15400)
–3.0 m 3800 2200 4100 2400 6500 3650 *11150 7050 *9200 *9200
(–9') (8400) (4900) (9100) (5300) (14400) (8100) (24500) (15600) (20300) (20300)
–4.5 m *4950 3450 *5550 3850 *8200 7350
(–14') (11000) (7600) (12200) (8500) (18000) (16200)
Arm length 2900 mm (9'6")
7.5 m *1900 *1900
(24') (4200) (4200)
6.0 m *1750 *1750 *3250 2950
(19') (3800) (3800) (7200) (6500)
4.5 m *1700 *1700 *2250 1850 *3900 2850
(14') (3800) (3800) (4900) (4100) (8600) (6300)
3.0 m *1800 1550 3050 1800 4500 2700 *5500 4400 *7850 *7850
(9') (3900) (3400) (6700) (4000) (9900) (6000) (12200) (9700) (17300) (17300)
0m *2250 1450 2850 1650 4100 2400 6600 3700 *7650 6950
(0') (5000) (3200) (6300) (3600) (9100) (5300) (14500) (8200) (16900) (15300)
–3.0 m 3450 1950 4050 2300 6400 3600 *11500 6900 *8400 *8400
(–9') (7600) (4400) (8900) (5100) (14200) (7900) (25300) (15300) (18500) (18500)
–4.5 m *4800 2950 *6050 3700 *8900 7200
(–14') (10600) (6500) (13300) (8200) (19600) (15800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-25
LIFTING CAPACITY
2C-26
LIFTING CAPACITY
PC180LC-7
Conditions:
One-piece boom: 5150 mm (16'11"), Bucket (SAE): 0.65 m3 (0.85 cu.yd), Shoes: 600 mm (24") unit :kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
6.0 m *2400 *2400 *3250 *3250
(20') (5300) (5300) (7100) (7100)
4.5 m *2350 *2350 *4450 3450 *5000 *5000
(15') (5200) (5200) (9800) (7600) (11000) (11000)
3.0 m *2450 2250 *5000 3300 *6300 5250 *9700 *9700
(10') (5400) (5000) (11000) (7200) (13800) (11500) (21300) (21300)
1.5 m *2700 2150 3350 2200 4850 3150 *7500 4750
(5') (5900) (4700) (7400) (4800) (10700) (6900) (16500) (10400)
0m 3150 2150 4700 3000 7450 4650 *6750 *6750
(0') (6900) (4700) (10300) (6600) (16400) (10200) (14800) (14800)
–1.5 m 3750 2400 4650 2950 7400 4550 10800 8800 *6200 *6200
(–5') (8200) (5300) (10200) (6500) (16300) (10000) (23700) (19300) (13600) (13600)
–3.0 m 4750 3050 *7300 4600 *10500 8950 *10250 *10250
(–10') (10400) (6700) (16000) (10100) (23100) (19700) (22500) (22500)
–4.5 m *4850 *4850 *7050 *7050
(–15') (10700) (10700) (15500) (15500)
Arm length 2600 mm (8'6")
6.0 m *2000 *2000 *3350 *3350
(20') (4400) (4400) (7300) (7300)
4.5 m *2000 *2000 *4200 3450
(15') (4400) (4400) (9200) (7600)
3.0 m *2050 *2050 *3200 2250 *4750 3350 *5900 5300 *8700 *8700
(10') (4500) (4500) (7000) (4900) (10400) (7300) (13000) (11600) (19100) (19100)
1.5 m *2300 2000 3400 2200 4850 3150 *7300 4900 *7850 *7850
(5') (5000) (4400) (7500) (4800) (10600) (6900) (16000) (10800) (17200) (17200)
0m *2650 2050 3300 2150 4700 3000 7500 4650 *7350 *7350
(0') (5800) (4500) (7200) (4700) (10300) (6600) (16500) (10200) (16100) (16100)
–1.5 m *3350 2250 4650 2950 7400 4550 *10150 8750 *5800 *5800
(–5') (7300) (4900) (10200) (6500) (16300) (10000) (22300) (19200) (12700) (12700)
–3.0 m 4300 2750 4650 3000 7400 4600 *11150 8900 *9200 *9200
(–10') (9400) (6000) (10200) (6600) (16300) (10100) (24500) (19600) (20200) (20200)
–4.5 m *4950 3000 *5550 4750 *8200 *8200
(–15') (10900) (6600) (12200) (10400) (18000) (18000)
Arm length 2900 mm (9'6")
6.0 m *1750 *1750 *3250 *3250
(20') (3800) (3800) (7100) (7100)
4.5 m *1700 *1700 *2250 *2250 *3900 3500
(15') (3700) (3700) (4900) (4900) (8600) (7700)
3.0 m *1800 *1800 *3450 2250 *4550 3350 *5500 5350 *7850 *7850
(10') (3900) (3900) (7600) (4900) (10000) (7300) (12100) (11700) (17200) (17200)
1.5 m *1950 1850 *3350 2150 4850 3150 *7000 4950 *10000 9350
(5') (4300) (4000) (7300) (4700) (10600) (6900) (15400) (10900) (22000) (20500)
0m *2250 1850 3300 2100 4700 3000 7450 4650 *7650 *7650
(0') (4900) (4000) (7200) (4600) (10300) (6600) (16400) (10200) (16800) (16800)
–1.5 m *2800 2050 2950 2050 4600 2900 7300 4500 *9750 8650 *5400 *5400
(–5') (6100) (4500) (6500) (4500) (10100) (6400) (16000) (9900) (21400) (19000) (11900) (11900)
–3.0 m 3900 2500 4600 2900 7300 4500 *11500 8750 *8400 *8400
(–10') (8600) (5500) (10100) (6400) (16000) (9900) (25300) (19200) (18500) (18500)
–4.5 m *4600 3650 *6050 4650 *8900 *8900
(–15') (10100) (8000) (13300) (10200) (19600) (19600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-27
LIFTING CAPACITY
PC180NLC-7
Conditions:
One-piece boom: 5150 mm (16'11"), Bucket (SAE): 0.65 m3 (0.85 cu.yd), Shoes: 500 mm (20") unit :kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
6.0 m *2400 *2400 *3250 3250
(20') (5300) (5300) (7100) (7100)
4.5 m *2350 2300 *4450 3200 *5000 *5000
(15') (5200) (5000) (9800) (7000) (11000) (11000)
3.0 m *2450 2050 *3000 *5000 3050 *6300 4800 *9700 9100
(10') (5400) (4500) (6600) (11000) (6700) (13800) (10500) (21300) (20000)
1.5 m *2700 1900 3350 4850 2900 *7500 4450
(5') (5900) (4200) (7300) (10700) (6400) (16500) (9800)
0m 3100 1950 *3100 4700 2750 7450 4200 *6750 *6750
(0') (6800) (4300) (6800) (10300) (6000) (16400) (9200) (14800) (14800)
–1.5 m 3700 2200 4650 2700 7400 4150 *10600 7800 *6200 *6200
(–5') (8100) (4800) (10200) (5900) (16300) (9100) (23300) (17100) (13600) (13600)
–3.0 m 4650 2750 *4750 2800 *7300 4200 *10500 8000 *10250 *10250
(–10') (10200) (6000) (10400) (6100) (16000) (9200) (23100) (17600) (22500) (22500)
–4.5 m *4850 4500 *7050 *7050
(–15') (10700) (9900) (15500) (15500)
Arm length 2600 mm (8'6")
6.0 m *2000 *2000 *3350 3300
(20') (4400) (4400) (7300) (7200)
4.5 m *2000 *2000 *4200 3250
(15') (4400) (4400) (9200) (7100)
3.0 m *2050 1900 *3200 2100 *4750 3100 *5900 4900 *8700 *8700
(10') (4500) (4200) (7000) (4600) (10400) (6800) (13000) (10800) (19100) (19100)
1.5 m *2300 1800 3400 2000 4850 2900 *7300 4450 *7850 *7850
(5') (5000) (3900) (7500) (4400) (10600) (6400) (16000) (9800) (17200) (17200)
0m *2650 1850 3300 1950 4700 2750 7500 4250 *7350 *7350
(0') (5800) (4000) (7200) (4300) (10300) (6000) (16500) (9400) (16100) (16100)
–1.5 m *3350 2000 4650 2700 7350 4100 *10150 7800 *5800 *5800
(–5') (7300) (4400) (10200) (5900) (16100) (9000) (22300) (17100) (12700) (12700)
–3.0 m 4250 2500 4650 2750 7400 4150 *11150 7900 *9200 *9200
(–10') (9300) (5500) (10200) (6000) (16300) (9100) (24500) (17400) (20200) (20200)
–4.5 m *4950 3800 *5550 4350 *8200 *8200
(–15') (10900) (8300) (12200) (9600) (18000) (18000)
Arm length 2900 mm (9'6")
6.0 m *1750 *1750 *3250 3300
(20') (3800) (3800) (7100) (7200)
4.5 m *1700 *1700 *2250 2100 *3900 3250
(15') (3700) (3700) (4900) (4600) (8600) (7100)
3.0 m *1800 1750 *3450 2050 *4550 3100 *5500 *4950 *7850 *7850
(10') (3900) (3800) (7600) (4500) (10000) (6800) (12100) (10900) (17200) (17200)
1.5 m *1950 1650 *3350 1950 4850 2900 *7000 4500 *10000 8400
(5') (4300) (3600) (7300) (4300) (10600) (6400) (15400) (9900) (22000) (18500)
0m *2250 1700 3300 1900 4700 2750 7450 4250 *7650 7200
(0') (4900) (3700) (7200) (4200) (10300) (6000) (16400) (9300) (16800) (15800)
–1.5 m *2800 1850 2950 1900 4600 2650 7300 4050 *9750 7750 *5400 *5400
(–5') (6100) (4000) (6500) (4200) (10100) (5800) (16000) (8900) (21400) (17000) (11900) (11900)
–3.0 m 3900 2300 4600 2650 7300 4050 *11500 7850 *8400 *8400
(–10') (8600) (5000) (10100) (5800) (16000) (8900) (25300) (17200) (18500) (18500)
–4.5 m *4800 3250 *6050 4200 *8900 8050
(–15') (10500) (7100) (13300) (9200) (19600) (17700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-28
LIFTING CAPACITY
PC200-8
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 600 mm (24") unit :kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *4300 4050
(20') (5800) (5800) (9500) (8900)
4.6 m *2650 2150 3950 2600 *4900 3900
(15') (5800) (4800) (8800) (5700) (10800) (8600)
3.0 m *2800 1950 3850 2500 5650 3700 *7350 5850 *11350 *11350
(10') (6100) (4300) (8500) (5500) (12500) (8100) (16200) (12900) (25000) (25000)
1.5 m 3000 1850 3750 2350 5400 3450 8600 5350 *7500 *7500
(5') (6600) (4100) (8300) (5200) (11900) (7600) (19000) (11800) (16500) (16500)
0m 3050 1900 3650 2300 5200 3250 8250 5050 *8000 *8000
(0') (6700) (4200) (8000) (5000) (11500) (7200) (18200) (11100) (17700) (17700)
–1.5 m 3350 2050 3600 2250 5100 3150 8100 4900 *11200 9500 *6800 *6800
(–5') (7400) (4600) (7900) (4900) (11200) (7000) (17900) (10800) (24700) (20900) (15000) (15000)
–3.0 m 4000 2500 5100 3150 8100 4950 *15600 9650 *10550 *10550
(–10') (8800) (5500) (11200) (7000) (17900) (10900) (34400) (21300) (23200) (23200)
–4.6 m 5650 3550 8300 5100 *13050 10000
(–15') (12500) (7900) (18300) (11200) (28800) (22000)
Arm length 1840 mm (6')
7.6 m *4800 *4800 *5500 *5500
(25') (10600) (10600) (12100) (12100)
6.1 m *4450 3450 *5450 3800 *5700 *5700
(20') (9900) (7600) (12100) (8300) (12600) (12600)
4.6 m 4200 2700 5650 3700 *7000 6000 *9850 *9850
(15') (9300) (6000) (12500) (8100) (15400) (13200) (21800) (21800)
3.0 m 3750 2350 5450 3500 8600 5350
(10') (8300) (5200) (12000) (7700) (19000) (11800)
1.5 m 3600 2250 3650 2300 5250 3300 8250 5000
(5') (8000) (5000) (8100) (5000) (11500) (7300) (18200) (11100)
0m 3750 2300 5100 3150 8050 4850
(0') (8200) (5100) (11200) (7000) (17700) (10700)
–1.5 m 4200 2650 5050 3150 8050 4850 *13350 9500
(–5') (9300) (5800) (11200) (6900) (17700) (10700) (29400) (21000)
–3.0 m 5500 3450 8200 5000 *13200 9800
(–10') (12100) (7600) (18100) (11000) (29100) (21600)
Arm length 2410 mm (7'11")
7.6 m *4300 4300
(25') (9500) (9400)
6.1 m *4100 3000 *4850 3950
(20') (9000) (6600) (10700) (8700)
4.6 m 3800 2450 3900 2500 *5400 3800 *6200 *6200
(15') (8400) (5400) (8600) (5600) (11900) (8400) (13600) (13600)
3.0 m 3400 2150 3800 2450 5600 3600 *8100 5700
(10') (7500) (4800) (8400) (5400) (12300) (8000) (17800) (12600)
1.5 m 3300 2050 3700 2350 5350 3400 8450 5250
(5') (7300) (4600) (8200) (5200) (11800) (7500) (18700) (11500)
0m 3400 2100 3650 2250 5150 3250 8150 4950 *7350 *7350
(0') (7500) (4700) (8000) (5000) (11400) (7100) (18000) (11000) (16200) (16200)
–1.5 m 3750 2350 5100 3150 8100 4900 *12250 9500 *7650 *7650
(–5') (8300) (5200) (11200) (7000) (17800) (10800) (27000) (21000) (16900) (16900)
–3.0 m 4650 2900 5150 3200 8200 4950 *14700 9750 *12650 *12650
(–10') (10200) (6400) (11400) (7100) (18000) (11000) (32400) (21500) (27900) (27900)
-4.6 m *7200 4550 *8100 5200 *11600 10150
(–15') (15900) (10000) (17800) (11500) (25500) (22400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-29
LIFTING CAPACITY
PC200-7
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 600 mm (24") unit :kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2500 *2500 *3500 *3500
(25') (5600) (5600) (7700) (7700)
6.1 m *2400 *2400 *3950 *3950
(20') (5300) (5300) (8700) (8700)
4.6 m *2400 2150 3950 2600 *4500 3900
(15') (5300) (4800) (8800) (5700) (9900) (8600)
3.0 m *2550 1950 3850 2500 *5350 3700 *6750 5850 *10450 *10450
(10') (5600) (4300) (8500) (5500) (11800) (8100) (14900) (12900) (23000) (23000)
1.5 m *2800 1850 3750 2350 5400 3450 *8550 5350 *6950 *6950
(5') (6200) (4100) (8300) (5200) (11900) (7600) (18900) (11800) (15300) (15300)
0m 3050 1900 3650 2300 5200 3250 8250 5050 *7400 *7400
(0') (6700) (4200) (8000) (5000) (11500) (7200) (18200) (11100) (16400) (16400)
–1.5 m 3350 2050 3600 2250 5100 3150 8100 4900 *10400 9500 *6300 *6300
(–5') (7400) (4600) (7900) (4900) (11200) (7000) (17900) (10800) (22900) (20900) (13900) (13900)
–3.0 m 4000 2500 5100 3150 8100 4950 *14350 9650 *9800 *9800
(–10') (8800) (5500) (11200) (7000) (17900) (10900) (31600) (21300) (21600) (21600)
–4.6 m 5650 3550 *8300 5100 *12000 10000
(–15') (12500) (7900) (18300) (11200) (26400) (22000)
Arm length 2410 mm (7'11")
7.6 m *4000 *4000
(25') (8800) (8800)
6.1 m *3750 3000 *4450 3950
(20') (8300) (6600) (9800) (8700)
4.6 m 3800 2450 3900 2500 *4950 3800 *5650 *5650
(15') (8400) (5400) (8600) (5600) (10900) (8400) (12500) (12500)
3.0 m 3400 2150 3800 2450 5600 3600 *7450 5700
(10') (7500) (4800) (8400) (5400) (12300) (8000) (16400) (12600)
1.5 m 3300 2050 3700 2350 5350 3400 8450 5250
(5') (7300) (4600) (8200) (5200) (11800) (7500) (18700) (11500)
0m 3400 2100 3650 2250 5150 3250 8150 4950 *6800 *6800
(0') (7500) (4700) (8000) (5000) (11400) (7100) (18000) (11000) (15000) (15000)
–1.5 m 3750 2350 5100 3150 8100 4900 *11400 9500 *7100 *7100
(–5') (8300) (5200) (11200) (7000) (17800) (10800) (25100) (21000) (15700) (15700)
–3.0 m 4650 2900 5150 3200 8200 4950 *13500 9750 *11750 *11750
(–10') (10200) (6400) (11400) (7100) (18000) (11000) (29800) (21500) (26000) (26000)
-4.6 m *6600 4550 *7400 5200 *10600 10150
(–15') (14500) (10000) (16300) (11500) (23400) (22400)
Arm length 1840 mm (6')
7.6 m *4450 *4450 *5050 *5050
(25') (9800) (9800) (11100) (11100)
6.1 m *4100 3450 *5000 3800 *5250 *5250
(20') (9100) (7600) (11100) (8300) (11600) (11600)
4.6 m 4150 2700 *5400 3700 *6400 6000 *9100 *9100
(15') (9200) (6000) (11900) (8100) (14100) (13200) (20100) (20100)
3.0 m 3750 2350 5450 3500 *8000 5350
(10') (8300) (5200) (12000) (7700) (17600) (11800)
1.5 m 3600 2250 3650 2300 5250 3300 8250 5000
(5') (8000) (5000) (8100) (5000) (11500) (7300) (18200) (11100)
0m 3750 2300 5100 3150 8050 4850
(0') (8200) (5100) (11200) (7000) (17700) (10700)
–1.5 m 4200 2650 5050 3150 8050 4850 *12400 9500
(–5') (9300) (5800) (11200) (6900) (17700) (10700) (27400) (21000)
–3.0 m 5500 3450 8200 5000 *12100 9800
(–10') (12100) (7600) (18100) (11000) (26700) (21600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-30
LIFTING CAPACITY
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *4300 *4300
(20') (5800) (5800) (9500) (9500)
4.6 m *2650 2550 *4650 3000 *4900 4500
(15') (5800) (5600) (10300) (6600) (10800) (9900)
3.0 m *2800 2300 4750 2900 *5850 4250 *7350 6750 *11350 *11350
(10') (6100) (5100) (10500) (6400) (12900) (9400) (16200) (14900) (25000) (25000)
1.5 m *3050 2200 4650 2800 6700 4000 *9300 6250 *7500 *7500
(5') (6700) (4900) (10200) (6200) (14700) (8900) (20500) (13800) (16500) (16500)
0m *3500 2250 4550 2700 6450 3850 10450 5900 *8000 *8000
(0') (7800) (5000) (10000) (5900) (14300) (8400) (23000) (13000) (17700) (17700)
–1.5 m 4150 2450 4500 2650 6350 3750 *10250 5800 *11200 *11200 *6800 *6800
(–5') (9200) (5400) (9900) (5800) (14000) (8200) (22700) (12700) (24700) (24700) (15000) (15000)
–3.0 m 4950 2950 6350 3750 10300 5800 *15600 11500 *10550 *10550
(–10') (11000) (6500) (14000) (8200) (22700) (12800) (34400) (25400) (23200) (23200)
–4.6 m *6750 4150 *9050 6000 *13050 11900
(–15') (14900) (9200) (20000) (13200) (28800) (26200)
Arm length 2410 mm (7'11")
7.6 m *4300 *4300
(25') (9500) (9500)
6.1 m *4100 3500 *4850 4500
(20') (9000) (7700) (10700) (10000)
4.6 m *4150 2850 *4700 2950 *5400 4400 *6200 *6200
(15') (9100) (6300) (10400) (6500) (11900) (9700) (13600) (13600)
3.0 m *4250 2550 4700 2850 *6300 4200 *8100 6600
(10') (9300) (5600) (10400) (6300) (13900) (9200) (17800) (14600)
1.5 m 4100 2450 4600 2750 *6600 3950 *9850 6100
(5') (9000) (5400) (10200) (6100) (14500) (8700) (21800) (13500)
0m 4200 2500 4550 2700 6450 3800 10350 5850 *7350 *7350
(0') (9300) (5500) (10000) (5900) (14200) (8400) (22800) (12900) (16200) (16200)
–1.5 m 4650 2750 6350 3750 10250 5800 *12250 11400 *7650 *7650
(–5') (10300) (6100) (14000) (8300) (22600) (12700) (27000) (25100) (16900) (16900)
–3.0 m 5750 3450 6400 3800 *10250 5850 *14700 11600 *12650 *12650
(–10') (12700) (7600) (14200) (8400) (22600) (12900) (32400) (25600) (27900) (27900)
–4.6 m *7200 5300 *8100 6100 *11600 *11600
(–15') (15900) (11700) (17800) (13500) (25500) (25500)
Arm length 1840 mm (6')
7.6 m *4800 *4800 *5500 *5500
(25') (10600) (10600) (12100) (12100)
6.1 m *4550 3950 *5450 4350 *5700 *5700
(20') (9900) (8800) (12100) (9600) (12600) (12600)
4.6 m *4500 3150 *5900 4250 *7000 6900 *9850 *9850
(15') (9900) (7000) (13000) (9400) (15400) (15200) (21800) (21800)
3.0 m *4650 2800 *6700 4050 *8700 6250
(10') (10200) (6200) (14800) (9000) (19200) (13700)
1.5 m 4500 2650 4550 2700 6500 3850 *10350 5900
(5') (9900) (5900) (10000) (6000) (14300) (8500) (22800) (13000)
0m 4650 2750 6350 3750 10200 5700
(0') (10300) (6100) (14000) (8200) (22500) (12600)
–1.5 m 5250 3100 6350 3700 10200 5700 *13350 11350
(–5') (11600) (6900) (14000) (8200) (22500) (12600) (29400) (25100)
–3.0 m 6850 4050 *9550 5900 *13200 11700
(–10') (15100) (8900) (21100) (13000) (29100) (25800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-31
LIFTING CAPACITY
PC200LC-8
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2750 *2750 *3800 *3800
(25') (6100) (6100) (8300) (8300)
6.1 m *2600 *2600 *4300 *4300
(20') (5800) (5800) (9500) (9500)
4.6 m *2650 2550 *4650 3000 *4900 4500
(15') (5800) (5600) (10300) (6600) (10800) (9900)
3.0 m *2800 2300 *4750 2900 *5850 4250 *7350 6750 *11350 *11350
(10') (6100) (5100) (10500) (6400) (12900) (9400) (16200) (14900) (25000) (25000)
1.5 m *3050 2200 4650 2800 6700 4000 *9300 6250 *7500 *7500
(5') (6700) (4900) (10200) (6200) (14700) (8900) (20500) (13800) (16500) (16500)
0m *3500 2250 4550 2700 6450 3850 10450 5900 *8000 *8000
(0') (7800) (5000) (10000) (5900) (14300) (8400) (23000) (13000) (17700) (17700)
–1.5 m *4150 2450 4500 2650 6350 3750 *10250 5800 *11200 *11200 *6800 *6800
(–5') (9200) (5400) (9900) (5800) (14000) (8200) (22700) (12700) (24700) (24700) (15000) (15000)
–3.0 m 4950 2950 6350 3750 10300 5800 *15600 11500 *10550 *10550
(–10') (11000) (6500) (14000) (8200) (22700) (12800) (34400) (25400) (23200) (23200)
–4.6 m *6750 4150 *9050 6000 *13050 11900
(–15') (14900) (9200) (20000) (13200) (28800) (26000)
Arm length 2410 mm (7'11")
7.6 m *4300 *4300
(25') (9500) (9500)
6.1 m *4100 3500 *4850 4500
(20') (9000) (7700) (10700) (10000)
4.6 m *4150 2850 *4700 2950 *5400 4400 *6200 *6200
(15') (9100) (6300) (10400) (6500) (11900) (9700) (13600) (13600)
3.0 m *4250 2550 4700 2850 *6300 4200 *8100 6600
(10') (9300) (5600) (10400) (6300) (13900) (9200) (17800) (14600)
1.5 m 4100 2450 4600 2750 *6600 3950 *9850 6100
(5') (9000) (5400) (10200) (6100) (14500) (8700) (21800) (13500)
0m 4200 2500 4550 2700 6450 3800 10350 5850 *7350 *7350
(0') (9300) (5500) (10000) (5900) (14200) (8400) (22800) (12900) (16200) (16200)
–1.5 m 4650 2750 6350 3750 10250 5800 *12250 11400 *7650 *7650
(–5') (10300) (6100) (14000) (8300) (22600) (12700) (27000) (25100) (16900) (16900)
–3.0 m 5750 3450 6400 3800 *10250 5850 *14700 11600 *12650 *12650
(–10') (12700) (6100) (14200) (8400) (22600) (12900) (32400) (25600) (27900) (27900)
–4.6 m *7200 5300 *8100 6100 *11600 *11600
(–15') (15900) (11700) (17800) (13500) (25500) (25500)
Arm length 1840 mm (6')
6.1 m *4450 3950 *5450 4350 *5700 *5700
(20') (9900) (8800) (12100) (9600) (12600) (12600)
7.6 m *4800 *4800 *5500 *5500
(25') (10600) (10600) (12100) (12100)
4.6 m *4500 3150 *5900 4250 *7000 *6900 *9850 *9850
(15') (9900) (7000) (13000) (9400) (15400) (15200) (21800) (21800)
3.0 m *4650 2800 *6700 4050 *8700 6250
(10') (10200) (6200) (14800) (9000) (19200) (13700)
1.5 m 4500 2650 4550 2700 6500 3850 *10350 5900
(5') (9900) (5900) (10000) (6000) (14300) (8500) (22800) (13000)
0m 4650 2750 6350 3750 10200 5700
(0') (10300) (6100) (14000) (8200) (22500) (12600)
–1.5 m 5250 3100 6350 3700 10200 5700 *13350 11350
(–5') (11600) (6900) (14000) (8200) (22500) (12600) (29400) (25100)
–3.0 m 6850 4050 *9550 5900 *13200 11700
(–10') (15100) (8900) (21100) (13000) (29100) (25800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-32
LIFTING CAPACITY
PC200LC-7
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2500 *2500 *3500 *3500
(25') (5600) (5600) (7700) (7700)
6.1 m *2400 *2400 *3950 *3950
(20') (5300) (5300) (8700) (8700)
4.6 m *2400 *2400 *4300 3000 *4500 4500
(15') (5300) (5300) (9400) (6600) (9900) (9900)
3.0 m *2550 2300 *4700 2900 *5350 4250 *6750 *6750 *10450 *10450
(10') (5600) (5100) (10300) (6400) (11800) (9400) (14900) (14900) (23000) (23000)
1.5 m *2800 2200 4650 2800 *6300 4000 *8550 6250 *6950 *6950
(5') (6200) (4900) (10200) (6200) (13900) (8900) (18900) (13800) (15300) (15300)
0m *3250 2250 4550 2700 6450 3850 *9750 5900 *7400 *7400
(0') (7100) (5000) (10000) (5900) (14300) (8400) (21500) (13000) (16400) (16400)
–1.5 m *4000 2450 4500 2650 6350 3750 *10100 5800 *10400 *10400 *6300 *6300
(–5') (8800) (5400) (9900) (5800) (14000) (8200) (22300) (12700) (22900) (22900) (13900) (13900)
–3.0 m 4950 2950 6350 3750 *9750 5800 *14350 11500 *9800 *9800
(–10') (11000) (6500) (14000) (8200) (21500) (12800) (31600) (25400) (21600) (21600)
–4.6 m *6150 4150 *8300 6000 *12000 11900
(–15') (13600) (9200) (18300) (13200) (26400) (26000)
Arm length 2410 mm (7'11")
7.6 m *4000 *4000
(25') (8800) (8800)
6.1 m *3750 3500 *4450 *4450
(20') (8300) (7700) (9800) (9800)
4.6 m *3800 2850 *4350 2950 *4950 4400 *5650 *5650
(15') (8000) (6300) (9600) (6500) (10900) (9700) (12500) (12500)
3.0 m *4050 2550 4700 2850 *5750 4200 *7450 6600
(10') (8900) (5600) (10400) (6300) (12700) (9200) (16400) (14600)
1.5 m 4100 2450 4600 2750 *6600 3950 *9050 6100
(5') (9000) (5400) (10200) (6100) (14500) (8700) (20000) (13500)
0m 4200 2500 4550 2700 6450 3800 *9950 5850 *6800 *6800
(0') (9300) (5500) (10000) (5900) (14200) (8400) (22000) (12900) (15000) (15000)
–1.5 m 4650 2750 6350 3750 *10100 5800 *11400 *11400 *7100 *7100
(–5') (10300) (7600) (14000) (8300) (22200) (12900) (25100) (25100) (15700) (15700)
–3.0 m 5750 3450 6400 3800 *9400 5850 *13500 11600 *11750 *11750
(–10') (12100) (7600) (14200) (8400) (20700) (12900) (29800) (25600) (26000) (26000)
–4.6 m *6600 5300 *7400 6100 *10600 *10600
(–15') (14500) (11700) (16300) (13500) (23400) (23400)
Arm length 1840 mm (6')
7.6 m *4450 *4450 *5050 *5050
(25') (9800) (9800) (11100) (11100)
6.1 m *4100 3950 *5000 4350 *5250 *5250
(20') (9100) (8800) (11100) (9600) (11600) (11600)
4.6 m *4150 3150 *5400 4250 *6400 *6400 *9100 *9100
(15') (9200) (7000) (11900) (9400) (14100) (14100) (20100) (20100)
3.0 m *4400 2800 *6150 4050 *8000 6250
(10') (9700) (6200) (13500) (9000) (17600) (13700)
1.5 m 4500 2650 4550 2700 6500 3850 *9500 5900
(5') (9900) (5900) (10000) (6000) (14300) (8500) (20900) (13000)
0m 4650 2750 6350 3750 *10050 5700
(0') (10300) (6100) (14000) (8200) (22100) (12600)
–1.5 m 5250 3100 6350 3700 *9800 5700 *12400 11350
(–5') (11600) (6900) (14000) (8200) (21600) (12600) (27400) (25100)
–3.0 m *6500 4050 *8750 5900 *12100 11700
(–10') (14400) (8900) (19300) (13000) (26700) (25800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-33
LIFTING CAPACITY
2C-34
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:700 mm (28")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2950 *2950 *3550 *3550
(25') (6500) (6500) (7850) (7850)
6.1 m *2800 *2800 *5350 4100
(20') (6150) (6150) (11800) (9100)
4.6 m *2800 2300 3950 2650 5900 3950 *6750 6450
(15') (6200) (5150) (8800) (5850) (13050) (8800) (14900) (14250)
3.0 m *2950 2050 3850 2550 5650 3750 *9050 5900 *14050 11350
(10') (6550) (4550) (8550) (5600) (12450) (8250) (20000) (13100) (31000) (25050)
1.5 m 3050 1950 3750 2400 5350 3500 8550 5400 *7350 *7350
(5') (6800) (4350) (8250) (5350) (11850) (7700) (18850) (11900) (16200) (16200)
0m 3150 2000 3650 5150 5150 3300 8150 5050 *8250 *8250
(0') (6950) (4400) (8050) (2300) (11400) (7300) (18000) (11200) (18250) (18250)
–1.5 m 3400 2150 3600 5050 5050 3200 8000 4950 *11650 9550 *7250 *7250
(–5') (7600) (4800) (7950) (2250) (11150) (7100) (17700) (10900) (25750) (21100) (16000) (16000)
–3.0 m 4150 2650 5050 3200 8050 4950 *16750 9750 *11100 *11100
(–10') (9100) (5850) (11200) (7100) (17800) (11000) (37000) (21450) (24450) (24450)
–4.6 m 8450 6000 8150 5050 *15400 22300
(–15') (3800) (13200) (18050) (11200) (34000) (10100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of
tipping load.
2C-35
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:800 mm (31.5")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2410 mm (7'11")
7.6 m *4550 *4550
(25') (10000) (10000)
6.1 m *4250 3600 *6050 4600
(20') (9450) (8000) (13350) (10150)
4.6 m *4300 2950 *4550 3000 *6650 4450 *7600 7200
(15') (9500) (6500) (10100) (6600) (14700) (9850) (16800) (15850)
3.0 m 4350 2600 4800 2900 6950 4200 *9900 6600
(10') (9650) (5800) (10550) (6400) (15350) (9300) (21800) (14650)
1.5 m 4200 2500 4650 2800 6650 4000 10750 6100
(5') (930) (5550) (10300) (6200) (14750) (8800) (23700) (13500)
0m 4300 2550 4600 2700 6500 3800 10400 5850 *7300 *7300
(0') (9550) (5700) (10150) (6000) (14350) (8450) (23000) (12900) (16100) (16100)
–1.5 m 4800 2850 6400 3750 10350 5800 *12450 11400 *7850 *7850
(–5') (10600) (6300) (14200) (8300) (22800) (12800) (27500) (25150) (17300) (17300)
–3.0 m 5950 3500 6500 3800 10450 5850 *17500 11650
(–10') (13150) (7800) (14350) (8450) (23050) (12950) (38650) (25700)
–4.6 m *8800 5550 *9650 6150 *13700 12100
(–15') (19450) (12200) (21250) (13550) (30300) (26750)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-36
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:800 mm (31.5")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
7.6 m *2950 *2950 *3550 *3550
(25') (6500) (6500) (7850) (7850)
6.1 m *2800 *2800 *5350 4650
(20') (6150) (6150) (11800) (10350)
4.6 m *2800 2700 *4550 3050 *6150 4500 *6750 *6750
(15') (6200) (5950) (10050) (6700) (13550) (10000) (14900) (14900)
3.0 m *2950 2400 4800 2950 7000 4250 *9050 6750 *14050 13200
(10') (6550) (5350) (10650) (6500) (15500) (9450) (20000) (14950) (31000) (29150)
1.5 m *3250 2300 4700 2800 6700 4000 *10850 6250 *7350 *7350
(5') (7200) (5100) (10350) (6200) (14850) (8900) (24000) (13750) (16200) (16200)
0m *3750 2350 4600 2700 6500 3850 10450 5900 *8250 *8250
(0') (8350) (5200) (10100) (6000) (14350) (8450) (23100) (13000) (18250) (18250)
–1.5 m 4350 2550 4550 2650 6400 3750 10300 5750 *11650 11350 *7250 *7250
(–5') (9600) (5650) (10000) (5900) (14150) (8250) (22800) (12750) (25750) (25000) (16000) (16000)
–3.0 m 5200 3050 6400 3750 10350 5800 *16750 11500 *11100 *11100
(–10') (11500) (6800) (14200) (8300) (22900) (12800) (37000) (25400) (24450) (24450)
–4.6 m 7550 4450 10500 5900 *15400 11900
(–15') (16700) (9800) (23150) (13050) (34000) (26250)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-37
LIFTING CAPACITY
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes:800 mm (31.5")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3900 mm (12'9")
7.6 m *1950 *1950 *2250 *2250
(25') (4400) (4400) (4950) (4950)
6.1 m *1850 *1850 *3550 3150
(20') (4100) (4100) (7850) (6950)
4.6 m *1800 *1800 *4200 3050 *4550 *4550
(15') (4050) (4050) (9350) (6750) (10100) (10100)
3.0 m *1850 1850 4800 2900 *6050 4300 *7100 7000
(10') (4150) (4050) (10650) (6450) (13300) (9550) (15700) (15500)
1.5 m *2000 1750 4650 2750 6750 4000 *9700 6350 *13350 12350
(5') (4450) (3900) (10250) (6100) (14900) (8850) (21400) (14050) (29500) (27200)
0m *2250 1750 4500 2600 6450 3750 10450 5850 *8300 *8300
(0') (4950) (3900) (9900) (5750) (14200) (8300) (23100) (12900) (18350) (18350)
–1.5 m *2650 1900 4350 2500 6250 3600 10150 5600 *9700 *9700 *5250 *5250
(–5') (5800) (4200) (9650) (5550) (13800) (7900) (22400) (12350) (21450) (21450) (11550) (11550)
–3.0 m *3300 2200 4350 2500 6200 3500 10050 5550 *12950 11000 *8050 *8050
(–10') (7350) (4850) (9650) (5500) (13650) (7800) (22200) (12200) (28600) (24300) (17750) (17750)
–4.6 m *4750 2850 6250 3600 10150 5600 *17700 11250 *11600 *11600
(–15') (10500) (6300) (13850) (7950) (22450) (12400) (39000) (24850) (25600) (25600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-38
LIFTING CAPACITY
2C-39
LIFTING CAPACITY
2C-40
LIFTING CAPACITY
2C-41
LIFTING CAPACITY
PC220-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3150 *3150 *4300 *4300
(25') (7000) (7000) (9500) (9500)
6.1 m *3050 *3050 *4050 3500 *4500 *4500
(20') (6700) (6700) (8900) (7800) (9900) (9900)
4.6 m *3050 2750 5050 3450 *5250 *5200
(15') (6700) (6000) (11100) (7600) (11600) (11400)
3.0 m *3250 2450 4900 3350 *6450 4900 *8150 7800 *12850 *12850
(10') (7100) (5500) (10800) (7400) (14200) (10800) (17900) (17200) (28300) (28300)
1.5 m *3550 2350 4750 3200 6850 4600 *10550 7150 *7400 *7400
(5') (7800) (5200) (10400) (7000) (15100) (10100) (23300) (15700) (16300) (16300)
0m 3650 2400 4600 3050 6550 4350 10500 6700 *8400 *8400
(0') (8100) (5300) (10100) (6700) (14500) (9600) (23200) (14800) (18500) (18500)
–1.5 m 4000 2600 4550 3000 6450 4200 10300 6550 *12000 *12000 *7450 *7450
(–5') (8800) (5800) (10000) (6600) (14200) (9300) (22700) (14400) (26400) (26400) (16400) (16400)
–3.0 m 4700 3100 6400 4200 10350 6550 *17300 13100 *11150 *11150
(–10') (10400) (6900) (14200) (9300) (22800) (14400) (38100) (28900) (25500) (25500)
–4.6 m 6500 4300 6600 4350 *10550 6750 *16550 13500
(–15') (14300) (9500) (14500) (9600) (23300) (14900) (36500) (29800)
Arm length 2500 mm (8'2")
7.6 m *5150 *5150
(25') (11400) (11400)
6.1 m *4850 4100 *5700 5100
(20') (10700) (9100) (12500) (11300)
4.6 m 4900 3300 *6350 4950 *7450 *7450 *10600 *10600
(15') (10800) (7300) (14000) (10900) (16500) (16500) (23400) (23400)
3.0 m 4400 2950 4750 3200 6900 4650 *9650 7100
(10') (9700) (6500) (10400) (7000) (15200) (10300) (21300) (15700)
1.5 m 4250 2800 4600 3050 6600 4400 10500 6700
(5') (9400) (6200) (10200) (6800) (14600) (9700) (23100) (14800)
0m 4400 2900 4550 3000 6400 4200 10200 6450
(0') (9700) (6400) (10000) (6600) (14200) (9300) (22500) (14200)
–1.5 m 4900 3250 6350 4150 10200 6450 *13950 12900
(–5') (10800) (7100) (14100) (9200) (22500) (14200) (30800) (28400)
–3.0 m 6200 4100 6500 4300 10400 6600 *16750 13250
(–10') (13700) (9100) (14300) (9400) (22900) (14600) (36900) (29200)
–4.6 m *8900 6800 *9100 7000
(–15') (19500) (15000) (20100) (15500)
Arm length 2000 mm (6'7")
7.6 m *4950 *4950 *5000 *5000
(25') (11000) (11000) (11100) (11100)
6.1 m *4750 3750 *5100 *5100
(20') (10500) (8300) (11300) (11300)
4.6 m 4550 3100 4950 3350 *5850 5050 *6650 *6650
(15') (10000) (6800) (10900) (7400) (12900) (11100) (14700) (14700)
3.0 m 4100 2750 4800 3250 *6950 4750 *9000 7500
(10') (9100) (6100) (10600) (7200) (15300) (10500) (19900) (16600)
1.5 m 3950 2600 4650 3100 6700 4450 10700 6900
(5') (8700) (5800) (10300) (6900) (14800) (9900) (23600) (15200)
0m 4050 2700 4550 3000 6450 4250 10300 6550 *7850 *7850
(0') (9000) (5900) (10000) (6600) (14300) (9400) (22800) (14500) (17300) (17300)
–1.5 m 4500 2950 4500 3000 6400 4200 10200 6450 *13400 12850 *8650 *8650
(–5') (9900) (6500) (10000) (6600) (14100) (9200) (22500) (14300) (29500) (28300) (19000) (19000)
–3.0 m 5500 3650 6450 4250 10350 6550 *17900 13100 *14150 *14150
(–10') (12100) (8000) (14200) (9300) (22800) (14500) (39500) (28900) (31200) (31200)
–4.6 m *8350 5500 *10250 6650 *14950 13650
(–15') (18400) (12100) (22600) (14700) (32900) (30100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-42
LIFTING CAPACITY
PC220-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *2900 *2900 *3900 *3900
(25') (6400) (6400) (8700) (8700)
6.1 m *2750 *2750 *3700 3500 *4100 *4100
(20') (6100) (6100) (8200) (7800) (9000) (9000)
4.6 m *2800 2750 *4600 3450 *4800 *4800
(15') (6200) (6000) (10100) (7600) (10600) (10600)
3.0 m *2950 2450 4900 3350 *5900 4900 *7450 *7450 *11800 *11800
(10') (6500) (5500) (10800) (7400) (13000) (10800) (17900) (17900) (26000) (26000)
1.5 m *3250 2350 4750 3200 6850 4600 *9700 7150 *6850 *6850
(5') (7200) (5200) (10400) (7000) (15100) (10100) (21400) (15700) (15100) (15100)
0m 3650 2400 4600 3050 6550 4350 10500 6700 *7800 *7800
(0') (8100) (5300) (10100) (6700) (14500) (9600) (23200) (14800) (17100) (17100)
–1.5 m 4000 2600 4550 3000 6450 4200 10300 6550 *11150 *11150 *6900 *6900
(–5') (8800) (5800) (10000) (6600) (14200) (9300) (22700) (14400) (24600) (24600) (15200) (15200)
–3.0 m 4700 3100 6400 4200 10350 6550 *16050 13100 *10750 *10750
(–10') (10400) (6900) (14200) (9300) (22800) (14500) (35400) (28900) (23700) (23700)
–4.6 m 6500 4300 6600 4350 *10400 6750 *15200 13500
(–15') (14300) (9500) (14500) (9600) (23000) (14900) (33500) (29800)
Arm length 2500 mm (8'2")
7.6 m *4600 *4600 *4650 *4650
(25') (10100) (10100) (10200) (10200)
6.1 m *4400 3750 *4650 *4650
(20') (9700) (8300) (10300) (10300)
4.6 m *4450 3100 4950 3350 *5350 5050 *6100 *6100
(15') (9800) (6800) (10900) (7400) (11700) (11100) (13500) (13500)
3.0 m 4100 2750 4800 3250 *6350 4750 8250 7500
(10') (9100) (6100) (10600) (7200) (14000) (10500) (18200) (16600)
1.5 m 3950 2600 4650 3100 6700 4450 *10300 6900
(5') (8700) (5800) (10300) (6900) (14800) (9900) (22700) (15200)
0m 4050 2700 4550 3000 6450 4250 10300 6550 *7250 *7250
(0') (9000) (5900) (10000) (6600) (14300) (9400) (22800) (14500) (16000) (16000)
–1.5 m 4500 2950 4500 3000 6400 4200 10200 6450 *12450 *12450 *8000 *8000
(–5') (9900) (6500) (10000) (6600) (14100) (9200) (22500) (14300) (27400) (27400) (17700) (17700)
–3.0 m 5500 3650 6450 4250 10350 6550 *16450 13100 *13150 *13150
(–10') (12100) (8000) (14200) (9300) (22800) (14500) (36300) (28900) (29000) (29000)
–4.6 m *8000 5500 *9350 6650 *13700 13650
(–15') (17600) (12100) (20600) (14700) (30200) (30100)
Arm length 2000 mm (6'7")
7.6 m *4750 *4750
(25') (10500) (10500)
6.1 m *4500 4100 *5200 5100
(20') (9900) (9100) (11400) (11300)
4.6 m *4550 3300 *5800 4950 *6850 *6850 *9750 *9750
(15') (10000) (7300) (12800) (10900) (15100) (15100) (21500) (21500)
3.0 m 4400 2950 4750 3200 *6750 4650 *8850 7100
(10') (9700) (6500) (10400) (7000) (14900) (10300) (19500) (15700)
1.5 m 4250 2800 4600 3050 6600 4400 10500 6700
(5') (9400) (6200) (10200) (6800) (14600) (9700) (23100) (14800)
0m 4400 2900 4550 3000 6400 4200 10200 6450
(0') (9700) (6400) (10000) (6600) (14200) (9300) (22500) (14200)
–1.5 m 4900 3250 6350 4150 10200 6450 *13000 12900
(–5') (10800) (7100) (14100) (9200) (22500) (14200) (28600) (28400)
–3.0 m 6200 4100 6500 4300 10400 6600 *15350 13250
(–10') (13700) (9100) (14300) (9400) (22900) (14600) (33900) (29200)
–4.6 m *8150 6800 *8350 7700
(–15') (17900) (15000) (18400) (15500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-43
LIFTING CAPACITY
2C-44
LIFTING CAPACITY
PC220LC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3150 *3150 *4300 *4300
(25') (7000) (7000) (9500) (9500)
6.1 m *3050 *3050 *4050 *4050 *4500 *4500
(20') (6700) (6700) (8900) (8900) (9900) (9900)
4.6 m *3050 *3050 *5050 4000 *5250 *5250
(15') (6700) (6700) (11100) (8800) (11600) (11600)
3.0 m *3250 2900 *5650 3850 *6450 5650 *8150 *8150 *12850 *12850
(10') (7100) (6400) (12500) (8500) (14200) (12400) (17900) (17900) (28300) (28300)
1.5 m *3550 2800 5800 3700 *7700 5350 *10550 8300 *7400 *7400
(5') (7800) (6200) (12800) (8200) (17000) (11700) (23300) (18300) (16300) (16300)
0m *4050 2850 5650 3600 8100 5100 *12200 7900 *8400 *8400
(0') (9000) (6300) (12500) (7900) (17900) (11200) (26900) (17400) (18500) (18500)
–1.5 m 4900 3100 5600 3500 7950 4950 *12900 7700 *12000 12000 *7450 *7450
(–5') (10800) (6800) (12300) (7800) (17500) (10900) (28400) (17000) (26400) (26400) (16400) (16400)
–3.0 m 5800 3650 7950 4950 *12700 7750 *17300 15700 *11500 *11500
(–10') (12800) (8100) (17500) (10900) (28000) (17000) (38100) (34600) (25500) (25500)
–4.6 m *7950 5050 *8100 5100 *11350 7950 *16550 16150
(–15') (17600) (11100) (17800) (11300) (25100) (17500) (36500) (35600)
Arm length 2500 mm (8'2")
7.6 m *5150 *5150
(25') (11400) (11400)
6.1 m *4850 4750 *5700 *5700
(20') (10700) (10500) (12500) (12500)
4.6 m *4900 3850 *6350 5700 *7450 *7450 *10600 *10600
(15') (10800) (8500) (14000) (12500) (16500) (16500) (23400) (23400)
3.0 m *5200 3450 *5800 3700 *7350 5400 *9650 8300
(10') (11500) (7600) (12800) (8200) (16300) (11900) (21300) (18300)
1.5 m 5200 3300 5650 3600 8150 5100 *11750 7850
(5') (11500) (7300) (12500) (7900) (18000) (11300) (25900) (17300)
0m 5400 3400 5600 3500 7950 4950 *12700 7600
(0') (11900) (7500) (12300) (7700) (17500) (10900) (28000) (16800)
–1.5 m 6050 3800 7900 4900 *12700 7600 *13950 *13950
(–5') (13300) (8400) (17400) (10800) (28000) (16800) (30800) (30800)
–3.0 m *7650 4800 8050 5000 *11800 7750 *16750 *15850
(–10') (16600) (10600) (17700) (11100) (26100) (17100) (36900) (34900)
–4.6 m *8900 7950 *9100 8200
(–15') (19600) (17500) (20100) (18000)
Arm length 2000 mm (6'7")
7.6 m *4950 *4950 *5000 *5000
(25') (11000) (11000) (11100) (11100)
6.1 m *4750 4350 *5100 *5100
(20') (10500) (9600) (11300) (11300)
4.6 m *4850 3600 *5500 3900 *5850 5800 *6650 *6650
(15') (10700) (7900) (12200) (8600) (12900) (12800) (14700) (14700)
3.0 m 5050 3250 5900 3800 *6950 5500 *9000 8700
(10') (11100) (7100) (13000) (8400) (15300) (12100) (19900) (19200)
1.5 m 4850 3100 5700 3650 *8100 5200 *11200 8050
(5') (10800) (5800) (12600) (8000) (17900) (11500) (24800) (17800)
0m 5000 3150 5600 3550 8000 5000 *12500 7700 *7850 *7850
(0') (11100) (7000) (12400) (7800) (17600) (11000) (27600) (17000) (17300) (17300)
–1.5 m 5550 3500 5550 3500 7900 4900 *12850 7650 *13400 *13400 *8650 *8650
(–5') (12200) (7700) (12300) (7700) (17400) (10800) (28300) (16800) (29500) (29500) (19000) (19000)
–3.0 m 6800 4250 7950 4950 *12300 7700 *17900 15700 *14150 *14150
(–10') (14900) (9400) (17600) (10900) (27100) (17000) (39500) (34700) (31200) (31200)
–4.6 m *8750 6400 *10250 7800 *14950 *14950
(–15') (19300) (14100) (22600) (17200) (32900) (32900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-45
LIFTING CAPACITY
PC220LC-7
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.0 m3 (1.31 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *2900 *2900 *3900 *3900
(25') (6400) (6400) (8700) (8700)
6.1 m *2750 *2750 *3700 *3700 *4100 *4100
(20') (6100) (6100) (8200) (8200) (9000) (9000)
4.6 m *2800 *2800 *4600 4000 *4800 *4800
(15') (6200) (6200) (10100) (8800) (10600) (10600)
3.0 m *2950 2900 *5150 3850 *5900 5650 *7450 *7450 *11800 *11800
(10') (6500) (6400) (11400) (8500) (13000) (12400) (16500) (16500) (26000) (26000)
1.5 m *3250 2800 *5800 3700 *7050 5350 *9700 8300 *6850 *6850
(5') (7200) (6200) (12800) (8200) (15500) (11700) (21400) (18300) (15100) (15100)
0m *3750 2850 5650 3600 *8000 5100 *11200 7900 *7800 *7800
(0') (8300) (6300) (12500) (7900) (17600) (11200) (24700) (17400) (17100) (17100)
–1.5 m *4600 3100 5600 3500 7950 4950 *11800 7700 *11150 11150 *6900 *6900
(–5') (10100) (6800) (12300) (7800) (17500) (10900) (26100) (17000) (24600) (24600) (15200) (15200)
–3.0 m 5800 3650 7950 4950 *11650 7750 *16050 15700 *10750 *10750
(–10') (12800) (8100) (17500) (10900) (25700) (17000) (35400) (34600) (23700) (23700)
–4.6 m *7250 5050 *7400 5100 *10400 7950 *15200 *15200
(–15') (16000) (11100) (16300) (1130) (23000) (17500) (33500) (33500)
Arm length 2500 mm (8'2")
7.6 m *4600 *4600 *4650 *4650
(25') (10100) (10100) (10200) (10200)
6.1 m *4400 4350 *4650 *4650
(20') (9700) (9600) (10300) (10300)
4.6 m *4450 3600 *5000 3900 *5350 *5350 *6100 *6100
(15') (9800) (7900) (11100) (8600) (11700) (11700) (13500) (13500)
3.0 m *4750 3250 *5500 3800 *6350 5500 *8250 *8250
(10') (10500) (7100) (12100) (8400) (14000) (12100) (18200) (18200)
1.5 m 4850 3100 5700 3650 *7400 5200 *10300 8050
(5') (10800) (5800) (12600) (8000) (16300) (11500) (22700) (17800)
0m 5000 3150 5600 3550 8000 5000 *11450 7700 *7250 *7250
(0') (11100) (7000) (12400) (7800) (17600) (11000) (25300) (17000) (16000) (16000)
–1.5 m 5550 3500 5550 3500 7900 4900 *11800 7650 *12450 *12450 *8000 *8000
(–5') (12200) (7700) (12300) (7700) (17400) (10800) (26000) (16800) (27400) (27400) (17700) (17700)
–3.0 m 6800 4250 7950 4950 *11250 7700 *16450 15700 *13150 *13150
(–10') (14900) (9400) (17600) (10900) (24900) (17000) (36300) (34700) (29000) (29000)
–4.6 m *8000 6400 *9350 7800 *13700 *13700
(–15') (17600) (14100) (20600) (17200) (30200) (30200)
Arm length 2000 mm (6'7")
7.6 m *4750 *4750
(25') (10500) (10500)
6.1 m *4500 *4500 *5200 *5200
(20') (9900) (9900) (11400) (11400)
4.6 m *4550 3850 *5800 5700 *6850 *6850 *9750 *9750
(15') (10000) (8500) (12800) (12500) (15100) (15100) (21500) (21500)
3.0 m *4800 3450 *5800 3700 *6750 5400 *8850 8300
(10') (10600) (7600) (12800) (8200) (14900) (11900) (19500) (18300)
1.5 m 5200 3300 5650 3600 *7700 5100 *10800 7850
(5') (11500) (7300) (12500) (7900) (17000) (11300) (23800) (17300)
0m 5400 3400 5600 3500 7950 4950 *11650 7600
(0') (11900) (7500) (12300) (7700) (17500) (10900) (25700) (16800)
–1.5 m 6050 3800 7900 4900 *11650 7600 *13000 *13000
(–5') (13300) (8400) (17400) (10800) (25700) (16800) (28600) (28600)
–3.0 m *7550 4800 7850 5000 *10850 7750 *15350 *15350
(–10') (16600) (10600) (17300) (11100) (23900) (17100) (33900) (33900)
–4.6 m *8150 7950 *8350 8200
(–15') (17900) (17500) (18400) (18000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-46
LIFTING CAPACITY
2C-47
LIFTING CAPACITY
2C-48
LIFTING CAPACITY
2C-49
LIFTING CAPACITY
PC228US-3
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
6.0 m *2700 2350 *3250 2450 *3950 3800
(20') (6000) (5150) (7200) (5400) (8750) (8450)
4.5 m *2750 1950 3950 2450 *4650 3700 *5000 *5000
(15') (6050) (4300) (8700) (5400) (10200) (8150) (11000) (11000)
3m *2900 1750 3850 2350 *5600 3500 *7100 5600 *11050 10700
(10') (6400) (3850) (5450) (5150) (12450) (7700) (15650) (12350) (24350) (23650)
1.5 m 2900 1700 3750 2250 5400 3250 8550 5100 *6850 *6850
(5') (6400) (3750) (8250) (4950) (11850) (7150) (18800) (11200) (15050) (15050)
0m 2950 1700 3650 2150 5200 3050 8250 4750 *7650 *7650
(0') (6500) (3750) (8050) (4700) (11450) (6700) (18150) (10450) (16900) (16900)
–1.5 m 3250 1850 3600 2100 5050 2950 8100 4650 *10800 9000 *6700 *6700
(–5') (7150) (4050) (7900) (4600) (11100) (6500) (17850) (10250) (23750) (19800) (14750) (14750)
–3.0 m 3850 2250 5100 2950 8100 4650 *15550 9150 *10300 *10300
(–10') (8450) (4950) (11200) (6500) (17850) (10250) (34250) (20150) (22650) (22650)
–4.5 m 5350 3200 8300 4800 *14500 9500
(–15') (11750) (7050) (18250) (10550) (31900) (20900)
PC228USLC-3
Conditions: Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2925 mm (9'7")
6.0 m *2700 *2700 *3250 2950 *3950 *3950
(20') (6000) (6000) (7200) (6500) (8750) (8750)
4.5 m *2750 2400 *4500 2900 *4650 4300 *5000 *5000
(15') (6050) (5250) (9900) (6350) (10200) (9450) (11000) (11000)
3m *2900 2150 4850 2800 *5650 4150 *7100 6500 *11050 *11050
(10') (6400) (4700) (10700) (6150) (12500) (9150) (15650) (14400) (24350) (24350)
1.5 m *3150 2050 4750 2700 *6750 3900 *9200 6050 *6850 *6850
(5') (6900) (4500) (10450) (6000) (14850) (8550) (20250) (13300) (15050) (15050)
0m *3650 2100 4600 2600 6600 3700 10600 5700 *7650 *7650
(0') (8050) (4600) (10100) (5700) (14550) (8150) (23400) (12550) (16900) (16900)
–1.5 m 4100 2300 4550 2550 6500 3600 10450 5600 *10800 *10800 *6700 *6700
(–5') (9000) (5050) (10000) (5600) (14300) (7900) (23100) (12300) (23750) (23750) (14750) (14750)
–3.0 m 4900 2750 6500 3600 10450 5600 *15550 11200 *10300 *10300
(–10') (10800) (6050) (14300) (7900) (23100) (12300) (34250) (24650) (22650) (22650)
–4.5 m 6800 3850 *9950 5800 *14500 11550
(–15') (14950) (8450) (21900) (12750) (31900) (25400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-50
LIFTING CAPACITY
PC230NHD-8
Conditions: One piece boom: 5700 mm (18'8"), Bucket (SAE): 0.96 m3 (1.26 cu.yd), Shoes: 550 mm (22")
Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
6.0 m *2650 *2650 *3550 2900 *4300 *4300
(20') (5800) (5800) (7800) (6400) (9400) (9400)
4.5 m *2650 2250 *4650 2850 *4900 4250 *5500 *5500
(15') (5800) (4900) (10200) (6200) (10800) (9300) (12100) (12100)
3.0 m *2800 2050 4900 2700 *5850 3950 *7400 6200 *11550 *11550
(10') (6100) (4500) (10800) (5900) (12800) (8700) (16300) (13600) (25400) (25400)
1.5 m *3050 1950 4750 2600 6800 3700 *9300 5650 *6400 *6400
(5') (6700) (4300) (10400) (5700) (14900) (8100) (20400) (12400) (14100) (14100)
0m *3450 2000 4650 2450 6550 3450 10450 5250 *7300 *7300
(0') (7600) (4400) (10200) (5400) (14400) (7600) (23000) (11500) (16000) (16000)
–1.5 m 4100 2150 4600 2400 6450 3350 10250 5150 *10550 9650 *6400 *6400
(–5') (9000) (4700) (10100) (5300) (14200) (7300) (22500) (11300) (23200) (21200) (14100) (14100)
–3.0 m 4850 2550 6450 3400 10300 5150 *15400 9850 *10150 *10150
(–10') (10600) (5600) (14200) (7500) (22600) (11300) (33900) (21600) (22300) (22300)
–4.5 m *6350 3550 9050 5350 *13000 10250
(–15') (13900) (7800) (19900) (11700) (28600) (22500)
Arm length 2400 mm (7'10")
6.0 m *4150 3100 *4900 4350
(20') (9100) (6800) (10800) (9500)
4.5 m *4150 2550 5000 2800 *5450 4200 *6300 *6300
(15') (9100) (5600) (11000) (6100) (12000) (9200) (13800) (13800)
3.0 m 4200 2300 4900 2750 *6350 3950 *8250 6100
(10') (9200) (5000) (10800) (6000) (13900) (8700) (18100) (13400)
1.5 m 4100 2200 4800 2600 6800 3700 *10000 5600
(5') (9000) (4800) (10500) (5700) (14900) (8100) (22000) (12300)
0m 4200 2250 4700 2550 6600 3550 10500 5300
(0') (9200) (4900) (10300) (5600) (14500) (7800) (23100) (11600)
–1.5 m 4600 2500 4650 2500 6550 3450 10400 5250 *11250 9900 *6900 *6900
(–5') (10100) (5500) (10200) (5500) (14500) (9600) (22900) (9300) (24700) (21800) (15200) (15200)
–3.0 m 5600 3050 6600 3500 *10300 5350 *14700 10150 *12000 *12000
(–10') (12300) (6700) (14500) (7700) (22600) (11700) (32300) (22300) (26400) (26400)
–4.5 m *6750 4500 *8250 5600 *11700 10600
(–15') (14800) (9900) (18100) (12300) (25700) (23300)
Arm length 1800 mm (5'11")
6.0 m *4600 3550 *5500 4200 *5850 *5850
(20') (10100) (7800) (12100) (9200) (12800) (12800)
4.5 m *4600 2850 *6000 4100 *7150 6450 *10200 *10200
(15') (10100) (6200) (13200) (9000) (15700) (14200) (22400) (22400)
3.0 m 4650 2550 4850 2650 *6800 3850 *9000 5850
(10') (10200) (5600) (10600) (5800) (14900) (8400) (19800) (12800)
1.5 m 4500 2450 4750 2600 6700 3650 *10450 5400
(5') (9900) (5400) (10400) (5700) (14700) (8000) (23000) (11900)
0m 4650 2500 4700 2550 6550 3500 10350 5200
(0') (10200) (5500) (10300) (5600) (14400) (7700) (22700) (11400)
–1.5 m 5250 2800 6550 3450 10350 5200 *12250 9950
(–5') (11500) (6100) (14400) (7600) (22700) (11400) (26900) (21900)
–3.0 m 6650 3600 6700 3600 *9650 5400 *13200 10250
(–10') (14600) (7900) (14700) (7900) (21200) (11900) (29000) (22500)
–4.5 m
(–15')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-51
LIFTING CAPACITY
PC240LC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.01 m3 (1.32 cu.yd), Shoes: 700 mm (28")
Lifting capacities, including bucket (730 kg), bucket linkage (200 kg) and bucket cylinder (140 kg) unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3000 *3000 *4450 4250 *4900 *4900
(20') (6600) (6600) (9800) (9400) (10800) (10800)
4.5 m *3050 *3050 *5550 4200 *5800 *5800
(15') (6700) (6700) (12200) (9200) (12800) (12800)
3.0 m *3200 2950 *6250 4050 *7150 5900 *9050 *9050 *14450 *14450
(10') (7100) (6500) (13700) (8900) (15700) (13000) (20000) (20000) (31800) (31800)
1.5 m *3550 2850 6050 3850 *8550 5550 *11700 8650 *6900 *6900
(5') (7800) (6200) (13300) (8500) (18800) (12200) (25800) (19000) (15200) (15200)
0m *4050 2900 5900 3700 8450 5250 *13500 8150 *8100 *8100
(0') (8900) (6400) (13000) (8200) (18600) (11600) (29700) (18000) (17900) (17900)
–1.5 m *4950 3100 5800 3650 8300 5150 13550 8000 *11650 *11650 *7350 *7350
(–5') (10900) (6900) (12800) (8000) (18300) (11300) (29900) (17600) (25700) (25700) (16200) (16200)
–3.0 m 5850 3700 8250 5100 13600 8000 *16750 16350 *11350 *11350
(–10') (12900) (8100) (18200) (11300) (30000) (17700) (37000) (36100) (25100) (25100)
–4.5 m 7950 5000 8450 5300 *12650 8200 *18350 16850
(–15') (17600) (11000) (18600) (11500) (27900) (18100) (40500) (37100)
Arm length 3500 mm (11'6")
6.0 m *2350 *2350 *4050 *4050
(20') (5200) (5200) (9000) (9000)
4.5 m *2400 *2400 *5050 4200 *5200 *5200
(15') (5300) (5300) (11200) (9300) (11500) (11500)
3.0 m *2550 *2550 *5800 4050 *6550 5950 *8050 *8050 *11850 *11850
(10') (5600) (5600) (12800) (8900) (14400) (13100) (17800) (17800) (26100) (26100)
1.5 m *2850 2650 6050 3850 *8000 5550 *10850 8750 *10850 *10850
(5') (6200) (5800) (13300) (8500) (17600) (12200) (24000) (19300) (23900) (23900)
0m *3300 2650 5850 3700 8400 5250 *12900 8150 *9500 *9500 *4300 *4300
(0') (7300) (5900) (12900) (8100) (18600) (11600) (28500) (18000) (20900) (20900) (9400) (9400)
–1.5 m *4050 2850 5750 3600 8150 5000 13500 7900 *11850 *11850 *7350 *7350
(–5') (8900) (6300) (12600) (7900) (18000) (11000) (29700) (17400) (26100) (26100) (16200) (16200)
–3.0 m 5350 3350 5700 3550 8150 5000 13450 7850 *15650 *15650 *10600 *10600
(–10') (11800) (7400) (12600) (7900) (18000) (11100) (29700) (17400) (34500) (34500) (23300) (23300)
–4.5 m 7050 4400 8250 5100 *13100 8000 *19350 16500 *14400 *14400
(–15') (15500) (9700) (18200) (11300) (28900) (17700) (42600) (36300) (31800) (31800)
Arm length 2500 mm (8'2")
6.0 m *4750 4400 *5650 *5650
(20') (10500) (9700) (12500) (12500)
4.5 m *4850 3650 *6100 4150 *6500 6100 *7500 *7500
(15') (10700) (8100) (13500) (9100) (14300) (13500) (16500) (16500)
3.0 m 5150 3300 6200 4000 *7750 5800 *10150 9100
(10') (11400) (7300) (13600) (8800) (17100) (12800) (22300) (20100)
1.5 m 5000 3200 6000 3850 8650 5450 *12550 8450
(5') (11000) (7000) (13300) (8500) (19100) (12100) (27700) (18600)
0m 5150 3250 5900 3750 8400 5250 13700 8100
(0') (11300) (7200) (13000) (8200) (18500) (11600) (30200) (17800)
–1.5 m 5650 3550 5850 3700 8300 5150 13600 8000 *13000 *13000 *8550 *8550
(–5') (12500) (7900) (12900) (8100) (18300) (11400) (29900) (17600) (28700) (28700) (18800) (18800)
–3.0 m 6850 4350 8350 5200 *13700 8100 *19850 16550 *13900 *13900
(–10') (15200) (9600) (18400) (11500) (30200) (17900) (43800) (36500) (30700) (30700)
–4.5 m *9550 6400 *11700 8400 *16750 *16750
(–15') (21000) (14100) (25800) (18500) (36900) (36900)
Arm length 2000 mm (6'7")
6.0 m *4850 4800 *6300 6200
(20') (10700) (10600) (13900) (13600)
4.5 m *4950 3950 *5600 4050 *7100 6000 *8400 *8400 *12000 *12000
(15') (10900) (8700) (12400) (8900) (15600) (13200) (18600) (18600) (26500) (26500)
3.0 m *5250 3550 6100 3950 *8250 5700 *11050 8850
(10') (11600) (7800) (13500) (8700) (18200) (12500) (24300) (19600)
1.5 m 5350 3400 5950 3800 8550 5400 *13200 8250
(5') (11800) (7500) (13200) (8400) (18900) (11900) (29100) (18200)
0m 5550 3500 5900 3700 8350 5200 13600 8000
(0') (12200) (7700) (13000) (8200) (18400) (11500) (30000) (17700)
–1.5 m 6200 3900 8300 5150 13600 8000 *13550 *13550
(–5') (13600) (8600) (18300) (11400) (30000) (17700) (29900) (29900)
–3.0 m 7800 4900 8450 5250 *13200 8150 *18650 16750
(–10') (17200) (10800) (18600) (11600) (29100) (18000) (41100) (36900)
–4.5 m *9750 7850 *10450 8550
(–15') (21500) (17300) (23100) (18900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-52
LIFTING CAPACITY
PC240NLC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.01 m3 (1.32 cu.yd), Shoes: 700 mm (28")
Lifting capacities, including bucket (730 kg), bucket linkage (200 kg) and bucket cylinder (140 kg) unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm (9'10")
6.0 m *3000 *3000 *4450 3750 *4900 *4900
(20') (6600) (6600) (9800) (8300) (10800) (10800)
4.5 m *3050 2800 *5550 3700 *5800 5500
(15') (6700) (6200) (12200) (8100) (12800) (12100)
3.0 m *3200 2550 5600 3550 *7150 5150 *9050 8200 *14450 *14450
(10') (7100) (5600) (12300) (7800) (15700) (11400) (20000) (18100) (31800) (31800)
1.5 m *3550 2450 5400 3350 7800 4850 *11700 7500 *6900 *6900
(5') (7800) (5400) (11900) (7400) (17200) (10700) (25800) (16500) (15200) (15200)
0m *4050 2450 5250 3200 7500 4550 12150 7050 *8100 *8100
(0') (8900) (5500) (11600) (7100) (16500) (10100) (26800) (15600) (17900) (17900)
–1.5 m 4400 2700 5150 3150 7350 4450 11950 6900 *11650 *11650 *7350 *7350
(–5') (9700) (5900) (11400) (6900) (16200) (9800) (26300) (15200) (25700) (25700) (16200) (16200)
–3.0 m 5200 3200 7350 4450 11950 6900 *16750 13800 *11350 *11350
(–10') (11500) (7000) (16200) (9800) (26400) (15200) (37000) (30500) (25100) (25100)
–4.5 m 7100 4350 7500 4600 12200 7100 *18350 14250
(–15') (15600) (9600) (16600) (10100) (25900) (15700) (40500) (31400)
Arm length 3500 mm (11'6")
6.0 m *2350 *2350 *4050 3800
(20') (5200) (5200) (9000) (8400)
4.5 m *2400 *2400 *5050 3700 *5200 *5200
(15') (5300) (5300) (11200) (8200) (11500) (11500)
3.0 m *2550 2350 5600 3550 *6550 5200 *8050 *8050 *11850 *11850
(10') (5600) (5200) (12300) (7800) (14400) (11500) (17800) (17800) (26100) (26100)
1.5 m *2850 2250 5400 3350 7850 4850 *10850 7600 *10850 *10850
(5') (6200) (5000) (11900) (7400) (17300) (10700) (24000) (16800) (23900) (23900)
0m *3300 2300 5200 3150 7500 4550 12150 7050 *9500 *9500 *4300 *4300
(0') (7300) (5000) (11500) (7000) (16500) (10000) (26800) (15500) (20900) (20900) (9400) (9400)
–1.5 m *4050 2450 5100 3050 7200 4300 11850 6800 *11850 *11850 *7350 *7350
(–5') (8900) (5400) (11200) (6800) (15900) (9500) (26100) (15000) (26100) (26100) (16200) (16200)
–3.0 m 4750 2850 5100 3050 7250 4300 11850 6750 *15650 13550 *10600 *10600
(–10') (10500) (6300) (11200) (6700) (15900) (9500) (26100) (14900) (34500) (29900) (23300) (23300)
–4.5 m 6250 3800 7350 4400 12000 6900 *19350 13900 *14400 *14400
(–15') (13800) (8400) (16200) (9700) (26400) (15200) (42600) (30700) (31800) (31800)
Arm length 2500 mm (8'2")
6.0 m *4750 3850 *5650 5600
(20') (10500) (8500) (12500) (12300)
4.5 m *4850 3200 5700 3800 *6500 5400 *7500 *7500
(15') (10700) (7100) (12500) (8400) (14300) (11900) (16500) (16500)
3.0 m 4600 2850 5550 3500 *7750 5050 *10150 8000
(10') (10200) (6300) (12200) (7700) (17100) (11200) (22300) (17600)
1.5 m 4450 2750 5350 3350 7700 4750 12450 7300
(5') (9800) (6100) (11800) (7400) (17000) (10500) (27500) (16200)
0m 4550 2800 5250 3200 7450 4550 12050 7000
(0') (10100) (6200) (11600) (7100) (16500) (10000) (26600) (15400)
–1.5 m 5050 3100 5200 3200 7350 4450 11950 6900 *13000 *13000 *8550 *8550
(–5') (11100) (6800) (11500) (7000) (16200) (9800) (26300) (15200) (28700) (28700) (18800) (18800)
–3.0 m 6100 3750 7400 4500 12050 7000 *19850 14000 *13900 *13900
(–10') (13500) (8300) (16400) (9900) (26600) (15400) (43800) (30900) (30700) (30700)
–4.5 m 9150 5550 *11700 7250 *16750 14500
(–15') (20100) (12200) (25800) (16000) (36900) (32000)
Arm length 2000 mm (6'7")
6.0 m *4850 4250 *6300 5450
(20') (10700) (9300) (13900) (12100)
4.5 m *4950 3450 5600 3550 *7100 5300 *8400 *8400 *12000 *12000
(15') (10900) (7600) (12400) (7800) (15600) (11600) (18600) (18600) (26500) (26500)
3.0 m 4950 3100 5450 3450 7950 5000 *11050 7750
(10') (10900) (6800) (12100) (7600) (17500) (11000) (24300) (17100)
1.5 m 4800 2950 5350 3300 7650 4700 12250 7150
(5') (10500) (6500) (11800) (7300) (16800) (10400) (27000) (15800)
0m 4950 3050 5250 3200 7450 4500 11950 6900
(0') (10900) (6700) (11600) (7100) (16400) (10000) (26400) (15200)
–1.5 m 5500 3400 7400 4450 11950 6900 *13550 *13550
(–5') (12200) (7500) (16300) (9900) (26300) (15200) (29900) (29900)
–3.0 m 6950 4250 7500 4550 12150 7050 *18650 14150
(–10') (15300) (9400) (16500) (10100) (26800) (15600) (41100) (31200)
–4.5 m *9750 6850 *10450 7450
(–15') (21500) (15100) (23100) (16400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-53
LIFTING CAPACITY
PC270-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.26 m3 (1.65 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2500 mm (8'2")
7.6 m *5550 *5550
(25') (12200) (12200)
6.1 m *5350 *4850 *7150 6500
(20') (11800) (10700) (15700) (14400)
4.6 m *5400 4000 6300 4250 *7900 6300 *9300 *9300
(15') (12000) (8800) (13800) (9400) (17400) (13900) (20500) (20500)
3.0 m 5350 3550 6150 4100 8850 5950 *11900 9300
(10') (11800) (7900) (13500) (9100) (19500) (13100) (26300) (20500)
1.5 m 5200 3450 5950 3950 8500 5600 13550 8650
(5') (11400) (7600) (13200) (8700) (18700) (12400) (29800) (19000)
0m 5350 3500 5850 3850 8250 5400 13150 8300
(0') (11800) (7700) (12900) (8500) (18200) (11900) (28900) (18300)
–1.5 m 5900 3900 8150 5300 13050 8200 *15700 *15700
(–5') (13000) (8600) (18000) (11700) (28800) (18100) (34600) (34600)
–3.0 m 7250 4800 8250 5400 13150 8350 *19100 17800
(–10') (16000) (10500) (18200) (11900) (29000) (18400) (42200) (39300)
–4.6 m *9000 7600 *10000 8650
(–15') (19800) (16800) (22000) (19100)
Arm length 3045 mm (10'0")
7.6 m *3450 *3450
(25') (7600) (7600)
6.1 m *3300 *3300 *4200 *4200 *6350 *6350
(20') (7300) (7300) (9200) (9200) (14000) (14000)
4.6 m *3350 *3350 *6250 4300 *7200 6400
(15') (7300) (7300) (13800) (9500) (15900) (14100)
3.0 m *3550 3150 6150 4150 *8500 6050 *10900 9550 *17850 *17850
(10') (7800) (6900) (13600) (9100) (18700) (13300) (24000) (21100) (39300) (39300)
1.5 m *3900 3050 6000 3950 8550 5700 *13250 8850 *7800 *7800
(5') (8600) (6700) (13200) (8800) (18900) (12500) (29300) (19500) (17200) (17200)
0m *4500 3100 5850 3850 8300 5400 13250 8350 *9600 *9600
(0') (9900) (6800) (12900) (8400) (18300) (12000) (29200) (18500) (21200) (21200)
–1.5 m 5150 3350 5750 3750 8150 5300 13050 8200 *13950 *13950 *8850 *8850
(–5') (11400) (7400) (12700) (8300) (17900) (11700) (28700) (18100) (30700) (30700) (19500) (19500)
–3.0 m 6100 4000 8150 5300 13100 8250 *20100 17600 *13650 *13650
(–10') (13500) (8800) (18000) (11700) (28800) (18200) (44300) (38800) (30100) (30100)
–4.6 m *8450 5750 *11600 8500 *16650 *16650
(–15') (18600) (12600) (25600) (18700) (36700) (36700)
Arm length 3500 mm (11'6")
7.6 m *2900 *2900
(25') (6400) (6400)
6.1 m *2800 *2800 *4450 4450
(20') (6100) (6100) (9800) (9800)
4.6 m *2800 *2800 *5800 4350 *6600 6450
(15') (6200) (6200) (12800) (9600) (14500) (14300)
3.0 m *3000 2900 6150 4150 *7950 6050 *9950 9700 *15500 *15500
(10') (6600) (6400) (13600) (9100) (17500) (13400) (22000) (21400) (34200) (34200)
1.5 m *3300 2750 5950 3950 8550 5700 *12400 8700 *11050 *11050
(5') (7200) (6100) (13100) (8700) (18900) (12500) (27300) (19200) (24300) (24300)
0m *3750 2800 5800 3750 8250 5350 13200 8350 *10450 *10450
(0') (8300) (6200) (12700) (8300) (18200) (11800) (29100) (18400) (23000) (23000)
–1.5 m *4600 3050 5650 3650 8050 5200 12900 8100 *13600 *13600 *8300 *8300
(–5') (10100) (6700) (12500) (8100) (17700) (11500) (28500) (17800) (29900) (29900) (18300) (18300)
–3.0 m 5500 3550 5700 3700 8000 5150 12900 8050 *18500 17250 *12400 *12400
(–10') (12100) (7900) (12500) (8100) (17700) (11400) (28400) (17800) (40800) (38100) (27300) (27300)
–4.6 m 7450 4850 *8150 5300 *12350 8250 *18100 17750
(–15') (16500) (10800) (18000) (11700) (27300) (18200) (39900) (39200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-54
LIFTING CAPACITY
PC270LC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.26 m3 (1.65 cu.yd), Shoes: 700 mm (24")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3450 *3450
(25') (7650) (7650)
6.1 m *3300 *3300 *4100 *4100 *6350 *6350
(20') (7300) (7300) (9100) (9100) (14050) (14050)
4.6 m *3350 *3350 *6250 4500 *7200 6700
(15') (7350) (7350) (13800) (9950) (15950) (14800)
3.0 m *3500 3350 7250 4350 *8450 6350 *10850 10150 *17200 *17200
(10') (7800) (7400) (16000) (9600) (18700) (14000) (24000) (22350) (38000) (38000)
1.5 m *3900 3200 7050 4150 *9750 6000 *13350 9350 *8350 *8350
(5') (8600) (7100) (15550) (9250) (21500) (13200) (29400) (20650) (18450) (18450)
0m *4500 3300 6900 4050 9850 5700 *14750 8900 *9950 *9950
(0') (9900) (7250) (15250) (8900) (21800) (12650) (32550) (19600) (21900) (21900)
–1.5 m *5550 3550 6800 3950 9700 5600 *15000 8700 *14300 *14300 *8950 *8950
(–5') (12250) (7900) (15050) (8750) (21450) (12350) (33100) (19250) (31600) (31600) (19750) (19750)
–3.0 m 7350 4250 9750 5600 *14150 8750 *20400 17900 *13850 *13850
(–10') (16200) (9450) (21500) (12350) (31200) (19350) (45000) (39500) (30550) (30550)
–4.6 m *8450 6000 *11750 9000 *16550 *16550
(–15') (18600) (13200) (25900) (19900) (36500) (36500)
Arm length 3500 mm (11'6")
7.6 m *2900 *2900
(25') (6450) (6450)
6.1 m *2800 *2800 *4400 *4400
(20') (6150) (6150) (9750) (9750)
4.6 m *2800 *2800 *5800 4550 *6600 *6600
(15') (6250) (6250) (12850) (10000) (14600) (14600)
3.0 m *3000 *3000 *6850 4350 *7900 6400 *9950 *9950 *14850 *14850
(10') (6600) (6600) (15100) (9600) (17450) (14100) (21950) (21950) (32750) (32750)
1.5 m *3250 2950 7050 4150 *9250 6000 *12450 9250 *11800 *11800
(5') (7250) (6550) (15550) (9150) (20450) (13200) (27450) (20400) (26000) (26000)
0m *3750 3000 6850 3950 9850 5650 *14300 8850 *10800 *10800
(0') (8350) (6550) (15100) (8800) (21700) (12500) (31600) (19500) (23850) (23850)
–1.5 m *4600 3250 6750 3900 9600 5500 *14900 8600 *13950 *13950 *8400 *8400
(–5') (10200) (7150) (14850) (8600) (21250) (12150) (32850) (18950) (30750) (30750) (18600) (18600)
–3.0 m 6250 3800 6750 3900 9600 5450 *14350 8550 *19050 17550 *12600 *12600
(–10') (13800) (8400) (14900) (8600) (21150) (12050) (31700) (18950) (42000) (38750) (27750) (27750)
–4.6 m *8150 5100 *9000 5600 *12500 8750 *17950 *17950
(–15') (18000) (11300) (19800) (12350) (27600) (19350) (39550) (39550)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-55
LIFTING CAPACITY
PC270LC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.26 m3 (1.65 cu.yd), Shoes: 800 mm (31.5")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3450 *3450
(25') (7650) (7650)
6.1 m *3300 *3300 *4100 *4100 *6350 *6350
(20') (7300) (7300) (9100) (9100) (14050) (14050)
4.6 m *3350 *3350 *6250 4600 *7200 6800
(15') (7350) (7350) (13800) (10200) (15950) (15050)
3.0 m *3500 3400 *7250 4450 *8450 6450 *10850 10300 *17200 *17200
(10') (7800) (7550) (16000) (9850) (18700) (14300) (24000) (22750) (38000) (38000)
1.5 m *3900 3300 7200 4250 *9750 6100 *13350 9550 *8350 *8350
(5') (8600) (7300) (15950) (9450) (21500) (13500) (29400) (21050) (18450) (18450)
0m *4500 3350 7050 4150 10100 5850 *14750 9050 *9950 *9950
(0') (9900) (7450) (15600) (9150) (22300) (12900) (32550) (20000) (21900) (21900)
–1.5 m *5550 3650 7000 4050 9950 5700 *15000 8900 *14300 *14300 *8950 *8950
(–5') (12250) (8100) (15400) (9000) (21950) (12600) (33100) (19650) (31600) (31600) (19750) (19750)
–3.0 m 7500 4350 9950 5700 *14150 8950 *20400 18250 *13850 *13850
(–10') (16550) (9650) (21950) (12650) (31200) (19750) (45000) (40300) (30550) (30550)
–4.6 m *8450 6100 *11750 9200 *16550 *16550
(–15') (18600) (13500) (25900) (20300) (36500) (36500)
Arm length 3500 mm (11'6")
7.6 m *2900 *2900
(25') (6450) (6450)
6.1 m *2800 *2800 *4400 *4400
(20') (6150) (6150) (9750) (9750)
4.6 m *2800 *2800 *5800 4650 *6600 *6600
(15') (6250) (6250) (12850) (10250) (14600) (14600)
3.0 m *3000 *3000 *6850 4450 *7900 6500 *9950 *9950 *14850 *14850
(10') (6600) (6600) (15100) (9850) (17450) (14350) (21950) (21950) (32750) (32750)
1.5 m *3250 3050 7200 4250 *9250 6100 *12450 9450 *11800 *11800
(5') (7250) (6700) (15900) (9400) (20450) (13500) (27450) (20800) (26000) (26000)
0m *3750 3050 7000 4050 10050 5800 *14300 9050 *10800 *10800
(0') (8350) (6800) (15450) (9000) (22200) (12800) (31600) (19950) (23850) (23850)
–1.5 m *4600 3300 6900 3950 9850 5600 *14900 8800 *13950 *13950 *8400 *8400
(–5') (10200) (7350) (15250) (8800) (21750) (12400) (32850) (19400) (30750) (30750) (18600) (18600)
–3.0 m 6250 3900 6900 4000 9800 5600 *14350 8750 *19050 17900 *12600 *12600
(–10') (13800) (8600) (15250) (8800) (21650) (12350) (31700) (19350) (42000) (39550) (27750) (27750)
–4.6 m *8150 5200 *9000 5750 *12500 8950 *17950 *17950
(–15') (18000) (11550) (19800) (12650) (27600) (19750) (39550) (39550)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-56
LIFTING CAPACITY
PC270LC-8
Conditions: Boom: 5850 mm (19'2"), Bucket (SAE): 1.26 m3 (1.65 cu.yd), Shoes: 850 mm (33.5")
Lifting mode: ON unit: kg (lb)
A MAX 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3045 mm (10'0")
7.6 m *3450 *3450
(25') (7650) (7650)
6.1 m *3300 *3300 *4100 *4100 *6350 *6350
(20') (7300) (7300) (9100) (9100) (14050) (14050)
4.6 m *3350 *3350 *6250 4700 *7200 6900
(15') (7350) (7350) (13800) (10350) (15950) (15300)
3.0 m *3500 3500 *7250 4500 *8450 6550 *10850 10450 *17200 *17200
(10') (7800) (7700) (16000) (10000) (18700) (14500) (24000) (23100) (38000) (38000)
1.5 m *3900 3350 7350 4350 *9750 6200 *13350 9700 *8350 *8350
(5') (8600) (7400) (16200) (9600) (21500) (13750) (29400) (21400) (18450) (18450)
0m *4500 3400 7200 4200 10250 5950 *14750 9200 *9950 *9950
(0') (9900) (7600) (15850) (9300) (22650) (13150) (32550) (20350) (21900) (21900)
–1.5 m *5550 3750 7100 4150 10100 5800 *15000 9050 *14300 *14300 *8950 *8950
(–5') (12250) (8250) (15700) (9150) (22350) (12850) (33100) (19950) (31600) (31600) (19750) (19750)
–3.0 m 7650 4450 10150 5800 *14150 9100 *20400 18550 *13850 *13850
(–10') (16850) (9850) (22350) (12850) (31200) (20050) (45000) (40900) (30550) (30550)
–4.6 m *8450 6200 *11750 9350 *16550 *16550
(–15') (18600) (13750) (25900) (20650) (36500) (36500)
Arm length 3500 mm (11'6")
7.6 m *2900 *2900
(25') (6450) (6450)
6.1 m *2800 *2800 *4400 *4400
(20') (6150) (6150) (9750) (9750)
4.6 m *2800 *2800 *5800 4700 *6600 *6600
(15') (6250) (6250) (12850) (10400) (14600) (14600)
3.0 m *3000 *3000 *6850 4500 *7900 6400 *9950 *9950 *14850 *14850
(10') (6600) (6600) (15100) (10000) (17450) (14100) (21950) (21950) (32750) (32750)
1.5 m *3250 3100 7300 4300 *9250 6200 *12450 9600 *11800 *11800
(5') (7250) (6850) (16150) (9550) (20450) (13700) (27450) (21150) (26000) (26000)
0m *3750 3150 7150 4150 10200 5900 *14300 9200 *10800 *10800
(0') (8350) (6950) (15750) (9150) (22550) (13000) (31600) (20250) (23850) (23850)
–1.5 m *4600 3400 7000 4050 10000 5700 *14900 8900 *13950 *13950 *8400 *8400
(–5') (10200) (7500) (15500) (8950) (22100) (12650) (32850) (19700) (30750) (30750) (18600) (18600)
–3.0 m 6250 3950 7050 4050 10000 5700 *14350 8900 *19050 18200 *12600 *12600
(–10') (13800) (8800) (15550) (9000) (22050) (12550) (31700) (19700) (42000) (40150) (27750) (27750)
–4.6 m *8150 5300 *9000 5850 *12500 9100 *17950 *17950
(–15') (18000) (11750) (19800) (12850) (27600) (20100) (39550) (39550)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-57
LIFTING CAPACITY
PC290LC-8
Conditions: One-piece Boom: 5850 mm, Bucket (SAE): 1.16 m3, Shoes: 700 mm
Lifting capacities, including bucket (848 kg), bucket linkage (200 kg) and bucket cylinder (140 kg) unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm
6.0 m *3300 *3300 *4700 *4700 *6400 *6400
4.5 m *3350 *3350 *6600 4900 *7300 7200
3.0 m *3550 *3550 *7350 4700 *8600 6800 *11150 10850 *17850 *17850
1.5 m *3900 3400 7550 4550 *9900 6450 *13600 10050 *7800 *7800
0m *4500 3500 7400 4400 10600 6200 *15050 9600 *9600 *9600
–1.5 m *5500 3800 7300 4300 10400 6000 *15250 9400 *13950 *13950 *8850 *8850
–3.0 m *7550 4500 10450 6050 *14400 9450 *20100 19400 *13650 *13650
–4.5 m *8450 6150 *8550 6250 *12100 9700 *17000 *17000
Arm length 3500 mm
6.0 m *2550 *2550 *4200 *4200
4.5 m *2650 *2650 *5700 4900 *6700 *6700
3.0 m *2850 *2850 *6950 4700 *8050 6850 *10200 *10200 *15500 *15500
1.5 m *3150 *3150 7550 4500 *9450 6450 *12850 10150 *12500 *12500
0m *3750 3300 7350 4350 *10500 6150 *14600 9550 *11500 *11500 *5500 *5500
–1.5 m *4700 3550 7250 4250 10350 5950 *15200 9300 *14400 *14400 *9100 *9100
–3.0 m *6550 4150 7250 4250 10300 5950 *14650 9300 *18950 *18950 *12900 *12900
–4.5 m *8550 5550 *9300 6050 *12850 9500 *18400 *18400
Arm length 2500 mm
6.0 m *5350 5250 *7200 *7200
4.5 m *5450 4400 *7250 4800 *8050 7050 *9600 *9600
3.0 m *5800 4000 7700 4650 *9250 6700 *12200 10550
1.5 m 6450 3850 7550 4500 *10400 6400 *14350 9850
0m 6650 3950 7400 4400 10550 6150 *15300 9500
–1.5 m 7350 4350 7400 4350 10450 6050 *15100 9400 *15700 *15700
–3.0 m *8850 5300 *10150 6150 *13750 9550 *19100 *19100
–4.5 m *9000 8050 *10500 9750
Arm length 2000 mm
6.0 m *5400 *5400 *7800 7200
4.5 m *5500 4750 *8550 6950 *10500 *10500 *15300 *15300
3.0 m *5850 4250 7650 4600 *9700 6650 *13000 10300
1.5 m *6550 4100 7500 4500 *10700 6300 *14850 9700
0m 7150 4250 7400 4400 10500 6100 *15350 9450
–1.5 m 8000 4750 10500 6100 *14750 9450 *16350 *16350
–3.0 m *9100 6000 *9500 6250 *13000 9650 *17400 *17400
–4.5 m
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-58
LIFTING CAPACITY
PC290NLC-8
Conditions: One-piece Boom: 5850 mm, Bucket (SAE): 1.16 m3, Shoes: 600 mm
Lifting capacities, including bucket (848 kg), bucket linkage (200 kg) and bucket cylinder (140 kg) unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3000 mm
6.0 m *3300 *3300 *4700 4500 *6400 *6400
4.5 m *3350 *3350 *6600 4450 *7300 6550
3.0 m *3550 3200 *7350 4250 *8600 6200 *11150 9800 *17850 *17850
1.5 m *3900 3050 7550 4100 *9900 5850 *13600 9000 *7800 *7800
0m *4500 3100 7350 3950 10550 5550 *15050 8550 *9600 *9600
–1.5 m *5500 3400 7300 3850 10350 5400 *15250 8400 *13950 *13950 *8850 *8850
–3.0 m *7550 4050 10400 5450 *14400 8450 *20100 16900 *13650 *13650
–4.5 m *8450 5550 *8550 5600 *12100 8700 *17000 *17000
Arm length 3500 mm
6.0 m *2550 *2550 *4200 *4200
4.5 m *2650 *2650 *5700 4450 *6700 6600
3.0 m *2850 *2850 *6950 4250 *8050 6250 *10200 9950 *15500 *15500
1.5 m *3150 2900 7500 4050 *9450 5850 *12850 9100 *12500 *12500
0m *3750 2950 7300 3900 *10500 5500 *14600 8550 *11500 *11500 *5500 *5500
–1.5 m *4700 3150 7200 3800 10300 5350 *15200 8300 *14400 *14400 *9100 *9100
–3.0 m *6550 3700 7200 3800 10250 5300 *14650 8300 *18950 16600 *12900 *12900
–4.5 m *8550 5000 *9300 5450 *12850 8450 *18400 17050
Arm length 2500 mm
6.0 m *5350 4800 *7200 6650
4.5 m *5450 4000 *7250 4350 *8050 6450 *9600 *9600
3.0 m *5800 3600 7700 4250 *9250 6100 *12200 9500
1.5 m 6400 3450 7500 4050 *10400 5750 *14350 8800
0m 6600 3550 7350 3950 10500 5550 *15300 8500
–1.5 m 7300 3900 7350 3950 10400 5450 *15100 8400 *15700 *15700
–3.0 m *8850 4800 *10150 5500 *13750 8550 *19100 17100
–4.5 m *9000 7250 *10500 8700
Arm length 2000 mm
6.0 m *5400 5200 *7800 6550
4.5 m *5500 4300 *8550 6350 *10500 10100 *15300 *15300
3.0 m *5850 3850 7600 4200 *9700 6000 *13000 9300
1.5 m *6550 3700 7500 4050 *10700 5700 *14850 8650
0m 7100 3800 7400 3950 10450 5500 *15350 8450
–1.5 m 8000 4300 10450 5500 *14750 8450 *16350 *16350
–3.0 m *9100 5400 *9500 5600 *13000 8650 *17400 17300
–4.5 m
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-59
LIFTING CAPACITY
2C-60
LIFTING CAPACITY
PC300-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *4600 *4600 *5950 5200
(25') (10100) (10100) (13200) (11500)
6.1 m *4500 3750 *6550 5200
(20') (9900) (8300) (14400) (11400)
4.6 m *4600 3250 5200 3500 *7050 5000 *8150 7400
(15') (10100) (7200) (11500) (7700) (15500) (11000) (18000) (16300)
3.0 m 4500 2950 5100 3350 *6950 4700 *9500 6850 *12650 10550
(10') (9900) (6500) (11200) (7400) (15300) (10400) (20900) (15100) (27900) (23300)
1.5 m 4350 2800 4950 3250 6700 4450 9550 6350 *14800 9750
(5') (9600) (6200) (10900) (7100) (14800) (9800) (21100) (14000) (32600) (21500)
0m 4450 2850 4800 3100 6450 4250 9150 6000 14600 9200 *7250 *7250
(0') (9800) (6300) (10500) (6900) (14200) (9400) (20200) (13200) (32200) (20300) (16000) (16000)
–1.5 m 4750 3100 4800 3100 6350 4150 9000 5800 14400 9050 *11750 *11750
(–5') (10500) (6800) (10500) (6800) (14000) (9100) (19800) (12800) (31700) (19900) (25900) (25900)
–3.0 m 5500 3550 6350 4150 8950 5800 *13950 9100 *17200 *17200
(–10') (12100) (7900) (14000) (9100) (19700) (12800) (30800) (20100) (37900) (37900)
–4.6 m *6700 4750 *8500 6000 *11350 9350 *15250 *15200
(–15') (14700) (10400) (18700) (13200) (25000) (20700) (33600) (33700)
–6.1 m *5600 *5600 *6750 *6750
(–20') (12300) (12300) (14900) (14900)
Arm length 4020 mm (13'2")
7.6 m *3550 *3550
(25') (7900) (7900)
6.1 m *3500 3200 *5350 3750
(20') (7700) (7000) (11800) (8300)
4.6 m *3550 2800 5400 3650 *6400 5200
(15') (7800) (6200) (11900) (8100) (14100) (11500)
3.0 m *3700 2550 5200 3500 7150 4900 *8600 7100 *11200 *11200 18050 18050
(10') (8200) (5600) (11500) (7700) (15800) (10800) (19000) (15700) (24700) (24700) (39800) (39800)
1.5 m 3800 2450 5000 3300 6800 4550 9750 6500 *13650 10100 *8050 *8050
(5') (8400) (5400) (11000) (7300) (15000) (10000) (21500) (14400) (30100) (22300) (17800) (17800)
0m 3850 2450 4850 3150 6500 4300 9250 6050 14700 9300 *8100 *8100
(0') (8500) (5400) (10700) (6900) (14300) (9400) (20400) (13300) (32400) (20500) (17800) (17800)
–1.5 m 4100 2600 4750 3050 6300 4100 8900 5750 14250 8900 *10800 *10800
(–5') (9000) (5700) (10500) (6700) (13900) (9000) (19700) (12700) (31400) (19600) (23800) (23800)
–3.0 m 4550 2950 4750 3050 6250 4000 8800 5650 14150 8800 *14650 *14650
(–10') (10000) (6500) (10400) (6700) (13700) (8900) (19400) (12500) (31200) (19400) (32300) (32300)
–4.6 m 5600 3650 6300 4100 8900 5750 *12800 9000 *18300 *18300
(–15') (12300) (8000) (13900) (9000) (19600) (12600) (28200) (19800) (40300) (40300)
–6.1 m *5800 5250 *6950 6000 *9550 9350 *13100 *13100
(–20') (12800) (11600) (15300) (13200) (21100) (20700) (28800) (28800)
Arm length 2200 mm (7'3")
7.6 m *7650 6400
(25') (16900) (14100)
6.1 m 7000 4800 7200 4950 *8200 7450
(20') (15400) (10600) (15900) (10900) (18100) (16400)
4.6 m 5950 4000 7050 4800 *9100 7050 *11750 11200
(15') (13100) (8800) (15500) (10600) (20100) (15500) (26000) (24700)
3.0 m 5350 3550 6750 4550 9700 6500 *14200 9900
(10') (11800) (7800) (14900) (10000) (21400) (14300) (31300) (21800)
1.5 m 5200 3400 6550 4300 9050 5900 14450 9100
(5') (11500) (7500) (14400) (9500) (20000) (13000) (31900) (20100)
0m 5350 3450 6350 4150 8950 5800 14200 8850
(0') (11800) (7600) (14000) (9200) (19700) (12800) (31300) (19500)
–1.5 m 5850 3800 6350 4100 8900 5750 *14100 8900 *14200 *14200
(–5') (12900) (8400) (14000) (9100) (19600) (12600) (31100) (19600) (31300) (31300)
–3.0 m 7100 4650 8850 5700 *12200 9100 *15100 *15100
(–10') (15700) (10300) (19500) (12600) (26900) (20100) (33300) (33300)
–4.6 m *6900 *6900 *8550 *8550
(–15') (15200) (15200) (18800) (18800)
Arm length 2550 mm (8'4")
7.6 m *6500 5500
(25') (14400) (12100)
6.1 m 6250 4250 *7100 5050
(20') (13800) (9400) (15700) (11100)
4.6 m 5400 3600 7150 4850 *8800 7150
(15') (11900) (7900) (15700) (10700) (19400) (15800)
3.0 m 4950 3250 6850 4600 9850 6600 *13750 10200
(10') (10900) (7200) (15100) (10100) (21700) (14500) (30300) (22500)
1.5 m 4800 3100 6600 4350 9350 6150 14750 9350
(5') (10600) (6800) (14500) (9600) (20600) (13600) (32500) (20600)
0m 4900 3200 6400 4200 9050 5850 14350 9000
(0') (10800) (7000) (14100) (9200) (19900) (12900) (31600) (19800)
–1.5 m 5350 3450 6350 4100 8900 5750 14300 8950 *12350 *12350
(–5') (11800) (7600) (14000) (9100) (19700) (12700) (31600) (19700) (27200) (27200)
–3.0 m 6300 4100 6400 4200 8800 5650 *12900 9100 *16850 *16850
(–10') (13900) (9100) (14100) (9200) (19400) (12400) (28400) (20100) (37200) (37200)
–4.6 m *6600 5800 *7100 6100 *9650 9500 *12100 *12100
(–15') (14600) (12800) (15600) (13500) (21300) (20900) (26700) (26700)
2C-61
LIFTING CAPACITY
PC300-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *4600 *4600 *5950 5200
(25') (10100) (10100) (13200) (11500)
6.1 m *4500 3750 *6550 5200
(20') (9900) (8300) (14400) (11400)
4.6 m *4600 3250 5200 3500 *7050 5000 *8150 7400
(15') (10100) (7200) (11500) (7700) (15500) (11000) (18000) (16300)
3.0 m 4500 2950 5100 3350 *6950 4700 *9500 6850 *12650 10550
(10') (9900) (6500) (11200) (7400) (15300) (10400) (20900) (15100) (27900) (23300)
1.5 m 4350 2800 4950 3250 6700 4450 9550 6350 *14800 9750
(5') (9600) (6200) (10900) (7100) (14800) (9800) (21100) (14000) (32600) (21500)
0m 4450 2850 4800 3100 6450 4250 9150 6000 14600 9200 *7250 *7250
(0') (9800) (6300) (10500) (6900) (14200) (9400) (20200) (13200) (32200) (20300) (16000) (16000)
–1.5 m 4750 3100 4800 3100 6350 4150 9000 5800 14400 9050 *11750 *11750
(–5') (10500) (6800) (10500) (6800) (14000) (9100) (19800) (12800) (31700) (19900) (25900) (25900)
–3.0 m 5500 3550 6350 4150 8950 5800 *13950 9100 *17200 *17200
(–10') (12100) (7900) (14000) (9100) (19700) (12800) (30800) (20100) (37900) (37900)
–4.6 m *6700 4750 *8500 6000 *11350 9350 *15250 *15200
(–15') (14700) (10400) (18700) (13200) (25000) (20700) (33600) (33700)
–6.1 m *5600 *5600 *6750 *6750
(–20') (12300) (12300) (14900) (14900)
Arm length 4020 mm (13'2")
7.6 m *3550 *3550
(25') (7900) (7900)
6.1 m *3500 3200 *5350 3750
(20') (7700) (7000) (11800) (8300)
4.6 m *3550 2800 5400 3650 *6400 5200
(15') (7800) (6200) (11900) (8100) (14100) (11500)
3.0 m *3700 2550 5200 3500 7150 4900 *8600 7100 *11200 *11200 18050 18050
(10') (8200) (5600) (11500) (7700) (15800) (10800) (19000) (15700) (24700) (24700) (39800) (39800)
1.5 m 3800 2450 5000 3300 6800 4550 9750 6500 *13650 10100 *8050 *8050
(5') (8400) (5400) (11000) (7300) (15000) (10000) (21500) (14400) (30100) (22300) (17800) (17800)
0m 3850 2450 4850 3150 6500 4300 9250 6050 14700 9300 *8100 *8100
(0') (8500) (5400) (10700) (6900) (14300) (9400) (20400) (13300) (32400) (20500) (17800) (17800)
–1.5 m 4100 2600 4750 3050 6300 4100 8900 5750 14250 8900 *10800 *10800
(–5') (9000) (5700) (10500) (6700) (13900) (9000) (19700) (12700) (31400) (19600) (23800) (23800)
–3.0 m 4550 2950 4750 3050 6250 4000 8800 5650 14150 8800 *14650 *14650
(–10') (10000) (6500) (10400) (6700) (13700) (8900) (19400) (12500) (31200) (19400) (32300) (32300)
–4.6 m 5600 3650 6300 4100 8900 5750 *12800 9000 *18300 *18300
(–15') (12300) (8000) (13900) (9000) (19600) (12600) (28200) (19800) (40300) (40300)
–6.1 m *5800 5250 *6950 6000 *9550 9350 *13100 *13100
(–20') (12800) (11600) (15300) (13200) (21100) (20700) (28800) (28800)
Arm length 2200 mm (7'3")
7.6 m *7650 6400
(25') (16900) (14100)
6.1 m 7000 4800 7200 4950 *8200 7450
(20') (15400) (10600) (15900) (10900) (18100) (16400)
4.6 m 5950 4000 7050 4800 *9100 7050 *11750 11200
(15') (13100) (8800) (15500) (10600) (20100) (15500) (26000) (24700)
3.0 m 5350 3550 6750 4550 9700 6500 *14200 9900
(10') (11800) (7800) (14900) (10000) (21400) (14300) (31300) (21800)
1.5 m 5200 3400 6550 4300 9050 5900 14450 9100
(5') (11500) (7500) (14400) (9500) (20000) (13000) (31900) (20100)
0m 5350 3450 6350 4150 8950 5800 14200 8850
(0') (11800) (7600) (14000) (9200) (19700) (12800) (31300) (19500)
–1.5 m 5850 3800 6350 4100 8900 5750 *14100 8900 *14200 *14200
(–5') (12900) (8400) (14000) (9100) (19600) (12600) (31100) (19600) (31300) (31300)
–3.0 m 7100 4650 8850 5700 *12200 9100 *15100 *15100
(–10') (15700) (10300) (19500) (12600) (26900) (20100) (33300) (33300)
–4.6 m *6900 *6900 *8550 *8550
(–15') (15200) (15200) (18800) (18800)
Arm length 2550 mm (8'4")
7.6 m *6500 5500
(25') (14400) (12100)
6.1 m 6250 4250 *7100 5050
(20') (13800) (9400) (15700) (11100)
4.6 m 5400 3600 7150 4850 *8800 7150
(15') (11900) (7900) (15700) (10700) (19400) (15800)
3.0 m 4950 3250 6850 4600 9850 6600 *13750 10200
(10') (10900) (7200) (15100) (10100) (21700) (14500) (30300) (22500)
1.5 m 4800 3100 6600 4350 9350 6150 14750 9350
(5') (10600) (6800) (14500) (9600) (20600) (13600) (32500) (20600)
0m 4900 3200 6400 4200 9050 5850 14350 9000
(0') (10800) (7000) (14100) (9200) (19900) (12900) (31600) (19800)
–1.5 m 5350 3450 6350 4100 8900 5750 14300 8950 *12350 *12350
(–5') (11800) (7600) (14000) (9100) (19700) (12700) (31600) (19700) (27200) (27200)
–3.0 m 6300 4100 6400 4200 8800 5650 *12900 9100 *16850 *16850
(–10') (13900) (9100) (14100) (9200) (19400) (12400) (28400) (20100) (37200) (37200)
–4.6 m *6600 5800 *7100 6100 *9650 9500 *12100 *12100
(–15') (14600) (12800) (15600) (13500) (21300) (20900) (26700) (26700)
2C-62
LIFTING CAPACITY
2C-63
LIFTING CAPACITY
PC300HD-7E0
Conditions: Boom: 6500 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *5300 *5300 *6250 *6250
(25') (11750) (11750) (13800) (13800)
6.1 m *5250 *5250 *7300 *7300
(20') (11600) (11600) (16150) (16150)
4.6 m *5400 5200 6200 5300 *7850 7300 *9100 *9100
(15') (11900) (11450) (13700) (11750) (17300) (16100) (20150) (20150)
3.0 m *5700 4800 *7350 5200 *8500 7000 *10450 9950 *14150 *14150
(10') (12650) (10650) (16200) (11450) (18800) (15500) (23100) (21900) (31250) (31250)
1.5 m *6300 4700 7600 5050 *9150 6700 *11600 9400 *16300 14400
(5') (13900) (10350) (16800) (11150) (20200) (14850) (25650) (20750) (36000) (31850)
0m *7200 4800 7650 4950 *9500 6500 *12200 9050 *16950 13900 *8750 *8750
(0') (15950) (10550) (16900) (10950) (20900) (14400) (26950) (19950) (37350) (30700) (19300) (19300)
–1.5 m *7600 5150 *9350 6400 *12100 8900 *16350 13800 *14050 *14050
(–5') (16750) (11400) (20600) (14150) (26650) (19600) (36050) (30400) (31050) (31050)
–3.0 m *7650 5950 *8400 6450 *11000 8800 *14700 13900 *19950 *19950
(–10') (16900) (13200) (18500) (14250) (24300) (19400) (32450) (30650) (44050) (44050)
–4.6 m *7400 *7400 *8800 *8800 *11750 *11750 *15350 *15350
(–15') (16400) (16400) (19400) (19400) (25950) (25950) (33850) (33850)
Arm length 4020 mm (13'2")
7.6 m *4000 *4000
(25') (8900) (8900)
6.1 m *3950 *3950 *5600 5550
(20') (8700) (8700) (12350) (12300)
4.6 m *4000 *4000 *6400 5350 *7000 *7000
(15') (8850) (8850) (14150) (11850) (15500) (15500)
3.0 m *4200 4100 *6800 5200 *7800 7050 *9400 *9400 *12450 *12450 *19950 *19950
(10') (9250) (9050) (15000) (11450) (17200) (15550) (20800) (20800) (27450) (27450) (44000) (44000)
1.5 m *4550 4000 *7200 5000 *8550 6700 *10750 9450 *15000 14650 *8450 *8450
(5') (10000) (8800) (15850) (11000) (18850) (14800) (23750) (20850) (33100) (32300) (18600) (18600)
0m *5100 4050 *7400 4800 *9100 6400 *11700 8950 *16350 13800 *9200 *9200
(0') (11250) (8950) (16400) (10650) (20050) (14150) (25800) (19750) (36100) (30500) (20300) (20300)
–1.5 m *5950 4300 *7350 4750 *9200 6250 *11950 8700 *16450 13450 *12500 *12500
(–5') (13150) (9500) (16200) (10450) (20350) (13750) (26350) (19150) (36300) (29750) (27550) (27550)
–3.0 m *6750 4850 *8800 6200 *11450 8600 *15500 13450 *17100 *17100
(–10') (14950) (10700) (19400) (13650) (25300) (19000) (34150) (29650) (37750) (37750)
–4.6 m *6750 5950 *7300 6300 *9950 8700 *13350 *13350 *18500 *18500
(–15') (14900) (13150) (16150) (13900) (22000) (19250) (29400) (29400) (40850) (40850)
–6.1 m *6200 *6200 *6650 *6650 *9400 *9400 *12500 *12500
(–20') (13700) (13700) (14650) (14650) (20750) (20750) (27650) (27650)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-64
LIFTING CAPACITY
PC300HD-7E0
Conditions: Boom: 6500 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 800 mm (32")
Lifting mode: ON unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *5300 *5300 *6250 *6250
(25') (11750) (11750) (13800) (13800)
6.1 m *5250 *5250 *7300 *7300
(20') (11600) (11600) (16150) (16150)
4.6 m *5400 5350 *6200 5400 *7850 7400 *9100 *9100
(15') (11900) (11800) (13700) (11950) (17300) (16350) (20150) (20150)
3.0 m *5700 4900 *7350 5250 *8500 7100 *10450 10050 *14150 *14150
(10') (12650) (10800) (16250) (11650) (18800) (15700) (23100) (22200) (31250) (31250)
1.5 m *6300 4750 *7600 5150 *9150 6850 *11600 9550 *16300 14650
(5') (13900) (10550) (16800) (11350) (20200) (15100) (25650) (21050) (36000) (32300)
0m *7200 4850 *7650 5050 *9500 6600 *12200 9200 *16950 14100 *8750 *8750
(0') (15950) (10750) (16900) (11100) (20900) (14600) (26950) (20250) (37350) (31150) (19300) (19300)
–1.5 m *7600 5250 *9350 6500 *12100 9000 *16350 14000 *14050 *14050
(–5') (16750) (11550) (20600) (14400) (26650) (19900) (36050) (30850) (31050) (31050)
–3.0 m *7650 6050 *8400 6550 *11000 8950 *14700 14100 *19950 *19950
(–10') (16900) (13400) (18500) (14450) (24300) (19700) (32450) (31100) (44050) (44050)
–4.6 m *7400 *7400 *8800 8800 *11750 *11750 *15350 *15350
(–15') (16400) (16400) (19400) (19400) (25950) (25950) (33850) (33850)
Arm length 4020 mm (13'2")
7.6 m *4000 *4000
(25') (8900) (8900)
6.1 m *3950 *3950 *5600 5550
(20') (8700) (8700) (12350) (12300)
4.6 m *4000 *4000 *6400 5450 *7000 *7000
(15') (8850) (8850) (14150) (12050) (15500) (15500)
3.0 m *4200 4150 *6800 5250 *7800 7150 *9400 *9400 *12450 *12450 *19950 *19950
(10') (9250) (9250) (15000) (11650) (17200) (15800) (20800) (20800) (27450) (27450) (44000) (44000)
1.5 m *4550 4050 *7200 5050 *8550 6800 *10750 9600 *15000 14850 *8450 *8450
(5') (10000) (8950) (15850) (11200) (18850) (15000) (23750) (21150) (33100) (32750) (18600) (18600)
0m *5100 4100 *7400 4900 *9100 6500 *11700 9100 *16350 14000 *9200 *9200
(0') (11250) (9100) (16400) (10850) (20050) (14400) (25800) (20050) (36100) (30950) (20300) (20300)
–1.5 m *5950 4350 *7350 4800 *9200 6350 *11950 8800 *16450 13700 *12500 *12500
(–5') (13150) (9650) (16200) (10650) (20350) (14000) (26350) (19450) (36300) (30200) (27550) (27550)
–3.0 m *6750 4900 *8800 6300 *11450 8750 *15500 13650 *17100 *17100
(–10') (14950) (10900) (19400) (13900) (25300) (19300) (34150) (30100) (37750) (37750)
–4.6 m *6750 6050 *7300 6400 *9950 8850 *13350 *13350 *18500 *18500
(–15') (14900) (13350) (16150) (14150) (22000) (19550) (29400) (29400) (40850) (40850)
–6.1 m *6200 *6200 *6650 *6650 *9400 *9400 *12500 *12500
(–20') (13700) (13700) (14650) (14650) (20750) (20750) (27650) (27650)
Arm length 2540 mm (8'4")
7.6 m *7600 *7600
(25') (16750) (16750)
6.1 m *7450 6700 *7950 7500 *8800 *8800
(20') (16500) (14800) (17550) (16550) (19450) (19450)
4.6 m *7650 5800 *8350 7300 *9850 *9850 *12700 *12700
(15') (16900) (12850) (18450) (16100) (21750) (21750) (28050) (28050)
3.0 m *7750 5400 *8950 7050 *11050 9850 *15300 15150
(10') (17150) (11900) (19700) (15500) (24400) (21800) (33800) (33400)
1.5 m *7850 5250 *9400 6750 *11950 9400 *16800 14250
(5') (17400) (11550) (20750) (14950) (26450) (20700) (37000) (31450)
0m *8000 5350 *9550 6600 *12250 9100 *16700 13950
(0') (17650) (11850) (21050) (14600) (27100) (20100) (36850) (30800)
–1.5 m *8050 5850 *9100 6550 *11800 9000 *15600 13950 *14950 *14950
(–5') (17800) (12950) (20050) (14500) (26050) (19900) (34400) (30800) (32950) (32950)
–3.0 m *7950 6950 *10350 9150 *13500 *13500 *17050 *17050
(–10') (17600) (15400) (22900) (20150) (29800) (29800) (37600) (37600)
–4.6 m *7250 *7250 *9800 *9800 *11950 *11950
(–15') (16000) (16000) (21700) (21700) (26350) (26350)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-65
LIFTING CAPACITY
PC300HD-7E0
Conditions: Boom: 6500 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 900 mm (35.5")
Lifting mode: ON unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *5300 *5300 *6250 *6250
(25') (11750) (11750) (13800) (13800)
6.1 m *5250 *5250 *7300 *7300
(20') (11600) (11600) (16150) (16150)
4.6 m *5400 5350 *6200 5450 *7850 7500 *9100 *9100
(15') (11900) (11800) (13700) (12100) (17300) (16550) (20150) (20150)
3.0 m *5700 4950 *7350 5350 *8500 7200 *10450 10150 *14150 *14150
(10') (12650) (10950) (16250) (11800) (18800) (15900) (23100) (22450) (31250) (31250)
1.5 m *6300 4800 *7600 5200 *9150 6900 *11600 9650 *16300 14800
(5') (13900) (10650) (16800) (11500) (20200) (15250) (25650) (21300) (36000) (32650)
0m *7200 4900 *7650 5100 *9500 6700 *12200 9300 *16950 14300 *8750 *8750
(0') (15950) (10900) (16900) (11250) (20900) (14800) (26950) (20500) (37350) (31500) (19300) (19300)
–1.5 m *7600 5300 *9350 6600 *12100 9150 *16350 14150 *14050 *14050
(–5') (16750) (11700) (20600) (14550) (26650) (20150) (36050) (31200) (31050) (31050)
–3.0 m *7650 6150 *8400 6600 *11000 9050 *14700 14250 *19950 *19950
(–10') (16900) (13550) (18500) (14650) (24300) (19950) (32450) (31450) (44050) (44050)
–4.6 m *7400 *7400 *8800 *8800 *11750 *11750 *15350 *15350
(–15') (16400) (16400) (19400) (19400) (25950) (25950) (33850) (33850)
Arm length 4020 mm (13'2")
7.6 m *4000 *4000
(25') (8900) (8900)
6.1 m *3950 *3950 *5600 *5600
(20') (8700) (8700) (12350) (12350)
4.6 m *4000 *4000 *6400 5500 *7000 *7000
(15') (8850) (8850) (14150) (12150) (15500) (15500)
3.0 m *4200 *4200 *6800 5350 *7800 7250 *9400 *9400 *12450 *12450 *19950 *19950
(10') (9250) (9250) (15000) (11750) (17200) (15950) (20800) (20800) (27450) (27450) (44000) (44000)
1.5 m *4550 4100 *7200 5150 *8550 6900 *10750 9700 *15000 15000 *8450 *8450
(5') (10000) (9100) (15850) (11350) (18850) (15200) (23750) (21400) (33100) (33100) (18600) (18600)
0m *5100 4150 *7400 4950 *9100 6600 *11700 9200 *16350 14200 *9200 *9200
(0') (11250) (9200) (16400) (11000) (20050) (14550) (25800) (20300) (36100) (31300) (20300) (20300)
–1.5 m *5950 4450 *7350 4900 *9200 6400 *11950 8900 *16450 13850 *12500 *12500
(–5') (13150) (9800) (16200) (10800) (20350) (14150) (26350) (19700) (36300) (30550) (27550) (27550)
–3.0 m *6750 5000 *8800 6350 *11450 8850 *15500 13800 *17100 *17100
(–10') (14950) (11050) (19400) (14050) (25300) (19550) (34150) (30450) (37750) (37750)
–4.6 m *6750 6150 *7300 6500 *9950 8950 *13350 *13350 *18500 *18500
(–15') (14900) (13550) (16150) (14350) (22000) (19800) (29400) (29400) (40850) (40850)
–6.1 m *6200 *6200 *6650 *6650 *9400 *9400 *12500 *12500
(–20') (13700) (13700) (14650) (14650) (20750) (20750) (27650) (27650)
Arm length 2540 mm (8'4")
7.6 m *7600 *7600
(25') (16750) (16750)
6.1 m *7450 6800 *7950 7600 *8800 *8800
(20') (16500) (15000) (17550) (16750) (19450) (19450)
4.6 m *7650 5900 *8350 7400 *9850 *9850 *12700 *12700
(15') (16900) (13000) (18450) (16300) (21750) (21750) (28050) (28050)
3.0 m *7750 5450 *8950 7100 *11050 9950 *15300 15300
(10') (17150) (12050) (19700) (15700) (24400) (22000) (33800) (33800)
1.5 m *7850 5300 *9400 6850 *11950 9500 *16800 14400
(5') (17400) (11700) (20750) (15150) (26450) (20950) (37000) (31800)
0m *8000 5450 *9550 6700 *12250 9200 *16700 14100
(0') (17650) (12000) (21050) (14750) (27100) (20350) (36850) (31800)
–1.5 m *8050 5950 *9100 6650 *11800 9150 *15600 14150 *14950 *14950
(–5') (17800) (13100) (20050) (14650) (26050) (20150) (34400) (31200) (32950) (32950)
–3.0 m *7950 7050 *10350 9250 *13500 *13500 *17050 *17050
(–10') (17600) (15550) (22900) (20400) (29800) (29800) (37600) (37600)
–4.6 m *7250 *7250 *9800 *9800 *11950 *11950
(–15') (16000) (16000) (21700) (21700) (26350) (26350)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-66
LIFTING CAPACITY
PC300SE-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 2.1 m3 (2.74 cu.yd), Shoes: 800 mm (31.5") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
7.6 m *7000 6600 *7150 *7150
(25') (15450) (14500) (15750) (15750)
6.1 m *6550 5200 *6650 5200 *7350 *7350
(20') (14450) (11500) (14650) (11450) (16200) (16200)
4.6 m 5200 4300 *6950 5050 *6900 *6900 *10750 *10750
(15') (11500) (9500) (15350) (11100) (15250) (15250) (23650) (23650)
3.0 m 6200 3850 *7450 4800 *9200 6900 *12950 10450
(10') (13700) (8450) (16400) (10550) (20250) (15150) (28500) (23100)
1.5 m 5950 3600 7400 4550 *9900 6450 *13900 9700
(5') (13150) (8000) (16350) (10050) (21750) (14200) (30600) (21350)
0m 6200 3750 7250 4400 *10000 6200 *13600 9450
(0') (13650) (8250) (16000) (9700) (22100) (13600) (29950) (20800)
–1.5 m 6850 4150 7200 4350 *8100 6100 *12500 9500
(–5') (15100) (9150) (15900) (9650) (17900) (13500) (27600) (20900)
–3.0 m *6850 5100 *8150 6250 *10600 9700
(–10') (15150) (11250) (17900) (13750) (23400) (21450)
–4.6 m *6000 *6000 *7000 *7000
(–15') (13250) (13250) (15400) (15400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-67
LIFTING CAPACITY
PC300LC-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.40 m3 (1.83 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3185 mm (10'5")
7.6 m *4600 *4600 *5950 5500
(25') (10100) (10100) (13200) (12100)
6.1 m *4500 3950 *6550 5450
(20') (9900) (8800) (14400) (12000)
4.6 m *4600 3450 6150 3700 *7050 5250 *8150 7750
(15') (10200) (7600) (13600) (8200) (15500) (11600) (18000) (17100)
3.0 m *4900 3100 6050 3550 *7750 5000 *9500 7200 *12650 11050
(10') (10800) (6900) (13300) (7900) (17100) (11000) (20900) (15800) (27900) (24400)
1.5 m 5200 3000 5900 3450 7950 4700 *10600 6700 *14800 10250
(5') (11500) (6600) (13000) (7600) (17500) (10400) (23400) (14800) (32700) (22600)
0m 5300 3050 5750 3350 7700 4500 10950 6350 *15600 9700 *7250 *7250
(0') (11700) (6700) (12700) (7400) (17000) (9900) (24200) (14000) (34300) (21400) (16000) (16000)
–1.5 m 5700 3300 5700 3300 7600 4400 10750 6150 *15250 9550 *11750 *11750
(–5') (12600) (7300) (12600) (7300) (16700) (9700) (23700) (13600) (33600) (21000) (25900) (25900)
–3.0 m 6550 3800 7600 4400 *10500 6150 *13950 9600 *17200 *17200
(–10') (14500) (8400) (16700) (9700) (23100) (13600) (30800) (21200) (37900) (37900)
–4.6 m *6700 5000 *8500 6300 *11350 9850 *15250 *15250
(–15') (14700) (11100) (18800) (13900) (25000) (21800) (33700) (33700)
–6.1 m *5600 *5600 *6750 *6750
(–20') (12300) (12300) (14900) (14900)
Arm length 4020 mm (13'2")
7.6 m *3550 *3550
(25') (7900) (7900)
6.1 m *3500 3400 *5350 4000
(20') (7700) (7500) (11800) (8800)
4.6 m *3550 2950 *5850 3850 *6400 5500
(15') (7800) (6500) (13000) (8500) (14100) (12100)
3.0 m *3700 2700 6150 3700 *7200 5150 *8600 7450 *11200 *11200 18050 18050
(10') (8200) (6000) (13600) (8200) (15800) (11300) (19000) (16400) (24700) (24700) (39800) (39800)
1.5 m *4000 2600 5950 3500 *7900 4800 *9900 6850 *13650 10600 *8050 *8050
(5') (8800) (5800) (13200) (7700) (17400) (10500) (21800) (15100) (30100) (23400) (17800) (17800)
0m *4450 2650 5800 3350 7750 4550 *10800 6400 *15050 9800 *8100 *8100
(0') (9800) (5800) (12800) (7400) (17100) (10000) (23800) (14100) (32200) (21600) (17800) (17800)
–1.5 m 4900 2800 5700 3250 7550 4350 10700 6100 *15350 9400 *10800 *10800
(–5') (10800) (6100) (12600) (7200) (16600) (9600) (23600) (13400) (33800) (20700) (23800) (23800)
–3.0 m 5500 3150 5650 3250 7450 4300 10600 6000 *14650 9300 *14650 *14650
(–10') (12100) (6900) (12500) (7100) (16500) (9400) (23300) (13200) (32300) (20500) (32300) (32300)
–4.6 m *6200 3900 *7200 4350 *9600 6050 *12800 9500 *18300 *18300
(–15') (13600) (8600) (15900) (9600) (21200) (13400) (28200) (20900) (40300) (40300)
–6.1 m *5800 5550 *6950 6350 *9550 *9550 *13100 *13100
(–20') (12800) (12200) (15300) (14000) (21100) (21100) (28800) (28800)
Arm length 2200 mm (7'3")
7.6 m *7650 6700
(25') (16900) (14700)
6.1 m *7350 5050 *7400 5200 *8200 7800
(20') (16200) (11100) (16300) (11400) (18100) (17200)
4.6 m 7000 4200 *7750 5050 *9100 7400 *11750 11700
(15') (15500) (9300) (17000) (11100) (20100) (16300) (26000) (25800)
3.0 m 6400 3750 8050 4800 *10250 6850 *14200 10400
(10') (14100) (8300) (17700) (10600) (22600) (15100) (31300) (22900)
1.5 m 6200 3600 7750 4550 10850 6250 *15350 9600
(5') (13700) (8000) (17100) (10100) (24000) (13800) (33900) (21200)
0m 6400 3700 7600 4400 10750 6150 *15150 9350
(0') (14100) (8100) (16800) (9700) (23700) (13500) (33400) (20600)
–1.5 m 7000 4050 7550 4350 10650 6050 *14100 9400 *14200 *14200
(–5') (15500) (9000) (16700) (9600) (23500) (13400) (31100) (20700) (31300) (31300)
–3.0 m *7650 4900 *9300 6050 *12200 9600 *15100 *15100
(–10') (16900) (10800) (20500) (13400) (26900) (21200) (33300) (33300)
–4.6 m *6900 *6900 *8550 *8550
(–15') (15200) (15200) (18800) (18800)
Arm length 2550 mm (8'4")
7.6 m *6500 5750
(25') (14400) (12700)
6.1 m *6400 4500 *7100 5300
(20') (14100) (9900) (15700) (11700)
4.6 m 6400 3600 *7500 5100 *8800 7500
(15') (11900) (7900) (16600) (11300) (19400) (16600)
3.0 m 5900 3450 8100 4850 *10000 6950 *13750 10700
(10') (13000) (7600) (17900) (10700) (22100) (15300) (30300) (23600)
1.5 m 5750 3300 7850 4600 *10900 6500 *15250 9850
(5') (12600) (7300) (17300) (10200) (24100) (14300) (33700) (21700)
0m 5850 3300 7650 4450 10800 6200 *15450 9500
(0') (12900) (7300) (16800) (9800) (23900) (13700) (34000) (20900)
–1.5 m 6400 3700 7550 4350 10700 6100 *14600 9450 *12350 *12350
(–5') (14100) (8100) (16700) (9600) (23600) (13500) (32200) (20800) (27200) (27200)
–3.0 m *7150 4350 *7300 4450 *9700 6000 *12900 9600 *16850 *16850
(–10') (15800) (9600) (16100) (9800) (21400) (13200) (28400) (21200) (37200) (37200)
–4.6 m *6600 6100 *7100 6450 *9650 *9650 *12100 *12100
(–15') (14600) (13500) (15600) (14200) (21300) (21300) (26700) (26700)
2C-68
LIFTING CAPACITY
2C-69
LIFTING CAPACITY
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4020 mm (13'2")
7.6 m *4150 *4150
(25') (9200) (9200)
6.1 m *4050 *4050 *5600 4750
(20') (9000) (9000) (12350) (10550)
4.6 m *4100 3800 *6550 4650 *7150 6450
(15') (9100) (8450) (14450) (10300) (15750) (14250)
3.0 m *4300 3550 *6950 4500 *7900 6150 *9450 8800 *12400 *12400 *19600 *19600
(10') (9500) (7850) (15300) (9900) (17450) (13550) (20900) (19400) (27400) (27400) (43250) (43250)
1.5 m *4650 3400 6950 4300 *8650 5800 *10850 8150 *15050 12550 *8750 *8750
(5') (10250) (7550) (15300) (9500) (19150) (12800) (23950) (18000) (33200) (27760) (19350) (19350)
0m *5150 3450 6750 4150 9000 5500 *11800 7700 *16500 11750 *9150 *9150
(0') (11400) (7600) (14950) (9150) (19850) (12150) (26100) (16950) (36450) (25950) (20250) (20250)
–1.5 m *6000 3650 6650 4050 8800 5300 *12150 7400 *16700 11400 *12350 *12350
(–5') (13250) (8050) (14700) (8950) (19400) (11750) (26800) (16350) (36850) (25150) (27250) (27250)
–3.0 m 6750 4100 8700 5250 *11700 7300 *15800 11350 *16900 *16900
(–10') (14850) (9050) (19250) (11650) (25850) (16150) (34850) (25050) (37250) (37250)
–4.6 m *6950 5000 *7650 5350 *10300 7400 *13750 11550 *19100 *19100
(–15') (15300) (11050) (16900) (11850) (22750) (16350) (30300) (25450) (42100) (42100)
–6.1 m *6450 *6450 *7150 *7150 *9950 *9950 *13300 *13300
(–20') (14250) (14250) (15800) (15800) (22000) (22000) (29300) (29300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-70
LIFTING CAPACITY
2C-71
LIFTING CAPACITY
2C-72
LIFTING CAPACITY
PC340LC-7E0
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.38 m3 (1.80 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm (10'6")
6.0 m *4900 4250 *7150 6000
(20') (10750) (9350) (15700) (13200)
4.5 m *5000 3700 *7700 5750 *8950 8500
(15') (11000) (8100) (16900) (12650) (19700) (18700)
3.0 m *5300 3400 *8450 5450 *10350 7900 *13900 12200
(10') (11650) (7450) (18600) (12000) (22750) (17350) (30550) (26800)
1.5 m 5550 3250 8600 5200 *11600 7350 *16350 11350
(5') (12200) (7150) (18900) (11400) (25500) (16150) (35950) (24950)
0m 5650 3300 8350 4950 11950 6950 *17150 10750 *7850 *7850
(0') (12400) (7250) (18350) (10900) (26300) (15300) (37700) (23650) (17250) (17250)
–1.5 m 6100 3550 8200 4800 *11700 6800 *16750 10600 *12650 *12650 *8850 *8850
(–5') (13400) (7800) (18000) (10550) (25700) (14950) (36850) (23300) (27800) (27800) (19450) (19450)
–3.0 m 6950 4100 8200 4800 *11500 6750 *15300 10650 *18500 *18500 *13600 *13600
(–10') (15300) (9000) (18000) (10550) (25300) (14850) (33650) (23400) (40700) (40700) (29900) (29900)
–4.5 m *7250 5250 *9550 6950 *12650 10950 *16750 *16750
(–15') (15900) (11550) (21000) (15300) (27800) (24100) (36850) (36850)
Arm length 4000 mm (13'1")
6.0 m *3700 3550
(20') (8100) (7800)
4.5 m *3750 3150 *6950 5950
(15') (8250) (6900) (15300) (13100)
3.0 m *3950 2900 *7800 5600 *9400 8200 *12300 *12300 *19450 *19450
(10') (8700) (6350) (17150) (12300) (20650) (18000) (27050) (27050) (42800) (42800)
1.5 m *4250 2800 *8600 5250 *10850 7550 *15100 11800 *8550 *8550
(5') (9350) (6150) (18900) (11550) (23850) (16600) (33200) (25950) (18800) (18800)
0m *4750 2800 8400 4950 *11850 7050 *16650 10900 *8600 *8600
(0') (10450) (6150) (18450) (10900) (26050) (15500) (36600) (23950) (18900) (18900)
–1.5 m 5200 3000 8200 4800 11700 6750 *16950 10500 *11450 *11450 *7250 *7250
(–5') (11400) (6600) (18000) (10550) (25700) (14850) (37300) (23100) (25200) (25200) (15950) (15950)
–3.0 m 5800 3350 8100 4700 11550 6650 *16150 10450 *15600 *15600 *11000 *11000
(–10') (12750) (7350) (17800) (10300) (25400) (14600) (35500) (23000) (34300) (34300) (24200) (24200)
–4.5 m *6650 4100 *8050 4750 *10700 6700 *14300 10600 *20050 *20050 *15350 *15350
(–15') (14600) (9000) (17700) (10450) (23500) (14700) (31450) (23300) (44100) (44100) (33750) (33750)
Arm length 2550 mm (8'4")
6.0 m *6900 4850 *7800 5900
(20') (15150) (10650) (17150) (12950)
4.5 m 6850 4150 *8300 5700 *9800 8350 *12600 *12600
(15') (15050) (9100) (18250) (12500) (21550) (18350) (27700) (27700)
3.0 m 6350 3800 8900 5450 *11100 7750 *15350 12000
(10') (13950) (8350) (19550) (12000) (24400) (17050) (33750) (26400)
1.5 m 6200 3700 8600 5200 *12100 7300 *17050 11050
(5') (13600) (8100) (18900) (11400) (26600) (16050) (37500) (24300)
0m 6350 3750 8400 5000 11900 6950 *17150 10700
(0') (13950) (8250) (18450) (11000) (26150) (15300) (37700) (23500)
–1.5 m 6900 4100 8300 4900 11800 6850 *16200 10650 *13350 *13350
(–5') (15150) (9000) (18250) (10750) (25450) (15050) (35600) (23400) (29350) (29350)
–3.0 m *7850 4800 *8200 5000 *10750 6700 *14300 10850 *18400 *18400
(–10') (17250) (10550) (18000) (11000) (23650) (14700) (31450) (23850) (40450) (40450)
–4.5 m *7350 6500 *8250 7200 *11000 *11000 *13650 *13650
(–15') (16150) (14300) (18150) (15800) (24200) (24200) (30000) (30000)
Arm length 2200 mm (7'3")
6.0 m *8000 5400 *8150 5800 *9100 8650
(20') (17600) (11850) (17900) (12750) (20000) (19000)
4.5 m 7500 4600 *8550 5600 *10150 8200 *13250 13000
(15') (16500) (10100) (18800) (12300) (22300) (18000) (29150) (28600)
3.0 m 6900 4150 8800 5350 *11350 7650 *15900 11650
(10') (15150) (9100) (19350) (11750) (24950) (16800) (34950) (25600)
1.5 m 6700 4000 8550 5100 11900 6950 *17150 10800
(5') (14700) (8800) (18800) (11200) (26150) (15300) (37700) (23750)
0m 6900 4100 8350 4950 11850 6900 *16850 10550
(0') (15150) (9000) (18350) (10900) (26050) (15150) (37050) (23200)
–1.5 m 7550 4500 8300 4900 11750 6800 *15650 10600 *15300 *15300
(–5') (16600) (9900) (18250) (10750) (25850) (14950) (34400) (23300) (33650) (33650)
–3.0 m *8350 5400 *10350 6750 *13500 10850 *16500 *16500
(–10') (18350) (11850) (22750) (14850) (29700) (23850) (36300) (36300)
–4.5 m *7700 *7700 *9850 *9850 *11600 *11600
(–15') (16900) (16900) (21650) (21650) (25500) (25500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-73
LIFTING CAPACITY
PC340LC-7E0
Conditions: Boom: 2-piece, Bucket (SAE): 1.38 m3, Shoes: 700 mm unit: kg
A MAX 10.5 m 9.5 m 7.5 m 6.0 m 4.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm
7.5 m *4400 *4400 *7150 6050 *7750 *7750
6.0 m *4200 3800 *6000 4100 *7350 6000 *8300 *8300 *8950 *8950
4.5 m *4200 3300 6700 4000 *7800 5700 *9250 8450 *11800 *11800
3.0 m *4300 3050 6500 3850 *8450 5400 *10450 7800 *14250 12250
1.5 m *4550 2950 6350 3700 8550 5050 *11450 7150 *16050 10950
0m *5000 3000 6200 3550 8250 4800 11800 6700 *16550 10350
–1.5 m 5700 3250 6150 3500 8100 4650 11550 6550 *15900 10150
–3.0 m 8150 4650 *10800 6550
Arm length 4000 mm
7.5 m *3300 *3300 *5150 4300 *6350 *6350 *6650 *6650
6.0 m *3150 *3150 *6150 4300 *6650 6250 *6950 *6950
4.5 m *3150 2800 *4100 2900 *6400 4150 *7200 5950 *8350 8350 *7950 *7950
3.0 m *3200 2600 5000 2850 6650 3950 *7850 5550 *9600 8150 *12750 *12750
1.5 m *3350 2500 4900 2750 6400 3750 *8550 5150 *10800 7400 *15000 11500
0m *3650 2550 4800 2650 6200 3550 8300 4800 *11600 6800 *11600 6800
–1.5 m *4050 2750 6050 3450 8100 4600 11500 6500 *16300 10100
–3.0 m 6050 3400 8000 4550 *11350 6400 *15250 10050
Arm length 2550 mm
7.5 m *6550 5450 *7850 5850 *8550 *8550 *9850 *9850
6.0 m *6250 4350 *7900 5850 *9050 *8800 *10950 *10950
4.5 m *6200 3750 6600 3950 *8300 5600 *9950 8250 *12950 *12950
3.0 m 5900 3450 6500 3800 *8800 5300 *11000 7600
1.5 m 5800 3350 6350 3700 8500 5000 *11800 7000
0m 5950 3450 6250 3600 8250 4800 11700 6650 *16300 10200
–1.5 m 6450 3750 8200 4700 *11550 6550 *15100 10200
–3.0 m
Arm length 2200 mm
7.5 m *8350 6250 *8950 8900 *10400 *10400
6.0 m *7850 4850 *8150 5750 *9400 8650 *11500 *11500
4.5 m 6950 4150 *8500 5550 *10250 8100 *13500 12850
3.0 m 6400 3750 6400 3750 8750 5200 *11200 7400
1.5 m 6250 3600 6300 3650 8450 3950 *11900 6850
0m 6450 3700 8250 4750 11600 6550 *15900 10050
–1.5 m 7050 4100 8200 4700 *11250 6500 *14450 10150
–3.0 m
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-74
LIFTING CAPACITY
PC340NLC-7E0
Conditions: Boom: 6470 mm, Bucket (SAE): 1.38 m3, Shoes: 600 mm unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm
6.0 m *4900 3800 *7150 5400
4.5 m *5000 3250 *7700 5200 *8950 7700
3.0 m *5300 3600 *8450 4900 *10350 7100 *13900 10900
1.5 m 5450 2850 8450 4600 *11600 6600 *16350 10050
0m 5550 2900 8200 4400 11750 6200 *17150 9500 *7850 *7850
–1.5 m 5950 3150 8100 4250 *11500 6000 *15300 9400 *18500 *18500 *8850 *8850
–3.0 m 6850 3600 8100 4250 *11500 6000 *15300 9400 *18500 *18500 *13600 *13600
–4.5 m *7250 4700 *9550 6150 *12650 9650 *16750 *16750
Arm length 4000 mm
6.0 m *3700 3150
4.5 m *3750 2750 *6950 5400
3.0 m *3950 2550 *7800 5050 *9400 7400 *12300 11800 *19450 *19450
1.5 m *4250 2450 8600 4700 *10850 6750 *15100 10500 *8550 *8550
0m *4750 2450 8250 4400 11850 6250 *16650 9650 *8600 *8600
–1.5 m 5100 2600 8050 4200 11500 5950 *16950 9250 *11450 *11450 *7250 *7250
–3.0 m 5700 2950 7950 4150 11400 5850 *16150 9200 *15600 *15600 *11000 *11000
–4.5 m *6650 3600 8050 4200 *10700 5950 *14300 9350 *20050 18950 *15350 *15350
Arm length 2550 mm
6.0 m *6900 4350 *7800 5350
4.5 m 6700 3750 *8300 5150 *9800 7550 *12600 12000
3.0 m 6250 3400 8750 4900 *11100 7000 *15350 10700
1.5 m 6050 3250 8600 4600 12100 6500 *17150 9450
0m 6250 3300 8400 4450 11750 6200 *17150 9450
–1.5 m 6750 3600 8300 4350 11600 6100 *16200 9400 *13350 *13350
–3.0 m *7850 4300 *8200 4450 *10750 5950 *14300 9600 *18400 *18400
–4.5 m *7350 5800 *8250 6400 *11000 9950 *13650 *13650
Arm length 2200 mm
6.0 m *8000 4900 *8150 5250 *9100 7850
4.5 m 7350 4100 *8550 5050 *10150 7400 *13250 11700
3.0 m 6750 3700 8800 4800 *11350 6850 *15900 10350
1.5 m 6600 3550 8550 4550 11750 6200 *17150 9550
0m 6750 3600 8350 4400 11650 6100 *16850 9300
–1.5 m 7400 3950 8300 4350 11550 6050 *15850 9350 *15300 *15300
–3.0 m *8350 4800 *10350 6000 *13500 9600 *16500 *16500
–4.5 m *7700 6900 *9850 *9850 *11600 *11600
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-75
LIFTING CAPACITY
PC340NLC-7E0
Conditions: Boom: 2-piece, Bucket (SAE): 1.38 m3, Shoes: 600 mm unit: kg
A MAX 10.5 m 9.5 m 7.5 m 6.0 m 4.5 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3200 mm
7.5 m *4400 4150 *7150 5500 *7750 *7750
6.0 m *4200 3350 *6000 3650 *7350 5400 *8300 8150 *8950 *8950
4.5 m *4200 2900 6600 3550 *7800 5150 *9250 7650 *11800 *11800
3.0 m *4300 2700 6400 3400 *8450 4800 *10450 7000 *14250 10900
1.5 m *4550 2600 6200 3250 8400 4450 *11450 6350 *16050 9700
0m *5000 2650 6100 3100 8150 4200 11600 5950 *16550 9050
–1.5 m 5600 2850 6050 3050 8000 4100 11350 5750 *15900 8900
–3.0 m 8000 4100 *10800 5750
Arm length 4000 mm
7.5 m *3300 *3300 *5150 3850 *6350 5800 *6650 *6650
6.0 m *3150 2800 *6150 3850 *6650 5650 *6950 *6950
4.5 m *3150 2450 *4100 2550 *6400 3700 *7200 5350 *8350 8000 *7950 *7950
3.0 m *3200 2250 4900 2500 6550 3500 *7850 4950 *9600 7300 *12750 11650
1.5 m *3350 2200 4800 2400 6300 3300 *8550 4600 *10800 6600 *15000 10200
0m *3650 2200 4700 2300 6100 3100 8200 4250 *11600 6000 *16250 9250
–1.5 m *4050 2350 5950 3000 7950 4050 11350 5700 *16300 8800
–3.0 m 5950 3000 7850 3950 11200 5600 *15250 8750
Arm length 2550 mm
7.5 m *6550 4900 *7900 5300 *8550 8250 *9850 *9850
6.0 m *6250 3900 *7950 5300 *9050 7950 *10950 *10950
4.5 m *6200 3350 6500 3500 *8350 5050 *10000 7450 *13000 11900
3.0 m 5850 3050 6400 3400 8700 4750 *11050 6800
1.5 m 5700 2950 6250 3300 8400 4450 *11850 6250
0m 5850 3050 6150 3200 8150 4250 11550 5900 *16400 9000
–1.5 m 6350 3300 8100 4200 11450 5800 *15250 9000
–3.0 m
Arm length 2200 mm
7.5 m *8350 5650 *8950 8250 *9850 *9850
6.0 m 7850 4350 *8150 5150 *9400 7950 *10950 *10950
4.5 m 6800 3650 *8500 4950 *10250 7450 *13000 11900
3.0 m 6300 3300 6300 3300 8600 4650 *11200 6800
1.5 m 6150 3200 6200 3200 8300 4350 11750 6250
0m 6300 3250 8100 4200 11400 5900 *16400 9000
–1.5 m 6900 3600 8050 4150 *11250 5800 *15250 9000
–3.0 m
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-76
LIFTING CAPACITY
2C-77
LIFTING CAPACITY
PC380LC-7
Conditions: Boom: 6470 mm (21'3"), Bucket (SAE): 1.38 m3 1.81 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (20') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2200 mm (7'3")
6.0 m *8000 6950 *8150 *7450 *9150 *9150
(20') (17600) (15300) (17900) (16400) (20100) (20100)
4.5 m *7950 5950 *8600 *7300 *10250 *10250 *13450 *13450
(15') (1750) (13100) (18900) (16000) (22500) (22500) (29600) (29600)
3.0 m *8050 5500 *9150 7000 *11450 9900 *16000 15250
(10') (17700) (12100) (20100) (15400) (25200) (21800) (35200) (33500)
1.5 m *8150 5350 *9600 6750 *12100 9200 *17150 *14400
(5') (17900) (11800) (21100) (14800) (26600) (20200) (37700) (31700)
0m *8300 5500 *9700 6600 *12450 9150 *16850 14200
(0') (18200) (12100) (21300) (14500) (27400) (20100) (37100) (31200)
–1.5 m *8400 6050 *9150 6550 *11900 9100 *15650 14250 *15950 *15950
(–5') (18500) (13300) (20100) (14400) (26200) (20000) (34400) (31300) (35100) (35100)
–3.0 m *8350 7300 *10350 9100 *13500 *13300 *16500 *16500
(–10') (18400) (16000) (22800) (20000) (29700) (29200) (36300) (36300)
–4.5 m *7700 *7700 *9850 *9850 *11600 *11600
(–15') (16900) (16900) (21700) (21700) (25500) (25500)
Arm length 2550 mm (8'4")
6.0 m *6900 6250 *7850 7550
(20') (15200) (13700) (17300) (16600)
4.5 m *7100 5450 *8350 7350 *9900 *9900 *12800 *12800
(15') (15600) (12000) (18400) (16200) (21800) (21800) (28100) (28100)
3.0 m *7550 5050 *9000 7100 *11150 10050 *15500 *15500
(10') (16600) (11100) (19800) (15600) (24500) (22100) (34100) (34100)
1.5 m 7650 4950 *9500 6850 *12100 9400 17100 14650
(5') (16800) (10900) (20900) (15100) (26600) (20700) (37600) (32200)
0m 7800 5100 *9700 6650 *12550 9250 17150 14300
(0') (17100) (11200) (21300) (14600) (27600) (20300) (37700) (31400)
–1.5 m 7900 5550 *9400 6650 *12150 9150 16200 14300 *13850 *13850
(–5') (17400) (12200) (20700) (14400) (26700) (20100) (35600) (31400) (30500) (30500)
–3.0 m *7800 6500 *8200 6650 *10700 9000 *14300 *14150 *18400 *18400
(–10') (17160) (14300) (18000) (14600) (23500) (19800) (31400) (31100) (40500) (40500)
–4.5 m *7300 *7300 *8250 8000 *11000 *11000 *13650 *13650
(–15') (16000) (16000) (18100) (17600) (24200) (24200) (30000) (30000)
Arm length 3900 mm (10'6")
6.0 m *4900 *4900 *7150 *7150
(20') (10800) (10800) (15700) (15700)
4.5 m *5000 4900 *7750 *7450 *9050 *9050
(15') (11000) (10800) (17000) (16400) (19900) (19900)
3.0 m *5300 4550 *8500 *7150 *10450 10200 *14000 *14000
(10') (11600) (10000) (18700) (15700) (23000) (22400) (30800) (30800)
1.5 m *5850 4450 *9150 *6850 *11700 9650 *16450 14950
(5') (12900) (9800) (20100) (15100) (25700) (21200) (36200) (32900)
0m *6650 4500 *9550 *6600 *12350 9250 *17150 14350 *8150 *8150
(0') (14600) (9900) (21000) (14500) (27200) (20300) (37700) (31600) (17900) (17900)
–1.5 m *7300 4850 *9500 *6500 *12300 9050 *16700 14200 *13000 *13000 *9150 *9150
(–5') (16000) (10700) (20900) (14300) (27000) (19900) (36700) (31200) (28600) (28600) (20100) (20100)
–3.0 m *7400 5600 *8700 *6500 *11500 9050 *15300 14300 *18950 *18950 *13950 *13950
(–10') (16300) (12300) (19100) (14300) (25300) (19900) (33600) (31400) (41700) (41700) (30700) (30700)
–4.5 m *7200 7200 *9350 9250 *12650 *12400 *16750 *16750
(–15') (15800) (15800) (20600 (20300) (27800) (29300) (36800) (36800)
Arm length 4020 mm (13'2")
6.0 m *3700 *3700
(20') (8100) (8100)
4.5 m *3750 *3750 *7000 *7000
(15') (8200) (8200) (15400) (15400)
3.0 m *3950 *3950 *7850 *7300 *9500 *9500 *12550 *12550 *19950 *1950
(10') (8700) (8700) (17300) (16000) (20900) (20900) (27600) (27600) (43900) (43900)
1.5 m *4250 3850 *8650 *6900 *10900 9800 *15250 *15250 *8550 *8550
(5') (9300) (8500) (19000) (15200) (24000) (21500) (33500) (33500) (18800) (18800)
0m *4750 3900 *9250 *6600 *11850 9150 *16700 14500 *8750 *8750
(0') (10500) (8600) (20300) (14500) (26100) (20100) (36700) (31900) (19200) (19200)
–1.5 m *5550 4150 *9450 *6450 *12250 9000 *16950 14100 *11700 *11700 *7500 *7500
(–5') (12200) (9100) (20800) (14200) (26900) (19800) (37300) (31000) (25700) (25700) (16500) (16500)
–3.0 m *6650 4650 *9150 *6350 *11850 8900 *16150 14050 *15950 *15950 *11250 *11250
(–10') (14600) (10200) (20100) (14000) (26100) (19600) (35500) (30900) (35100) (35100) (24700) (24700)
–4.5 m *6650 5650 *8050 *6450 *10700 9750 *14300 14100 *19800 *20050 *15650 *15650
(–15') (14600) (12400) (17700) (14200) (23500) (21400) (31400) (31000) (43500) (44100) (34400) (34400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-78
LIFTING CAPACITY
PC400-7
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.90 m3 (2.49 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.5 m *5750 *5750 *6700 6300
(24') (12600) (12600) (14700) (13800)
6.0 m *5750 5150 *8400 6250 *9150 8700
(19') (12600) (11300) (18500) (13700) (20100) (19100)
4.5 m *5950 4650 *8850 6050 *10100 8350 *12050 *12050
(14') (13000) (10100) (19500) (13300) (22100) (18300) (26500) (26500)
3.0 m *6250 4350 8850 5850 *11100 7900 *13900 11250 *19450 17450
(9') (13700) (9500) (19400) (12800) (24400) (17400) (30600) (24700) (42800) (38400)
1.5 m 6600 4250 8600 5600 11500 7550 *15400 10550 *20800 16100
(4') (14400) (9300) (18800) (12300) (25200) (16500) (33900) (23200) (45800) (35400)
0.0 m 6750 4300 8400 5450 11150 7250 15850 10100 *19800 15550
(0') (14700) (9400) (18400) (11900) (24500) (15900) (34900) (22100) (43600) (34200)
–1.5 m 7150 4600 8300 5350 11000 7050 15650 9850 *21500 15400 *12950 *12950
(–4') (15700) (10100) (18200) (11700) (24100) (15500) (34400) (21700) (47300) (33900) (28500) (28500)
–3.0 m 8050 5200 8300 5400 10950 7050 *15050 9850 *19700 15550 *19000 *19000
(–9') (17700) (11400) (18300) (11800) (24100) (15500) (33100) (21700) (43400) (34100) (41800) (41800)
–4.5 m *8550 6400 *9900 7200 *13000 10050 *16750 15850 *21750 *21750
(–14') (18700) (14000) (21800) (15800) (28600) (22100) (36800) (34900) (47900) (47900)
–6.0 m *7700 *7700 *9050 *9050 *11950 *11950
(–19') (16900) (16900) (19800) (19800) (26200) (26200)
Arm length 4000 mm (13'1")
7.5 m *4900 *4900 *7550 6450
(24') (10800) (10800) (16500) (14100)
6.0 m *4900 4650 7800 6350
(19') (10700) (10200) (17100) (13900)
4.5 m *5050 4200 *8350 6150 *9350 8450
(14') (11000) (9200) (18300) (13400) (20600) (18600)
3.0 m *5300 3950 8850 5900 *10500 8000 *12950 11450 *17750 *17750
(9') (11600) (8600) (19500) (12900) (23000) (17600) (28500) (25100) (39100) (39100)
1.5 m *5750 3850 8600 5600 *11500 7550 *14700 10650 *20800 16400
(4') (12600) (8400) (18900) (12300) (25300) (16600) (32300) (23400) (45800) (36100)
0.0 m *6150 3900 8350 5400 11150 7200 *15750 10050 *21900 15550 *8550 *8550
(0') (13400) (8500) (18300) (11800) (24500) (15800) (34700) (22100) (48200) (34200) (18800) (18800)
–1.5 m 6450 4100 8200 5250 10900 6950 *15500 9750 *21850 15250 *12500 *12500
(–4') (14200) (9000) (18000) (11500) (23900) (15300) (34100) (21400) (48100) (33500) (27500) (27500)
–3.0 m 7200 4600 8150 5200 10800 6900 *15400 9650 *20550 15250 *17350 *17350
(–9') (15700) (10000) (17900) (11400) (23700) (15100) (33900) (21200) (45300) (33500) (38100) (38100)
–4.5 m *8200 5500 *10700 6950 *13850 9750 *18150 15450 *23400 *23400
(–14') (18000) (12000) (23500) (15300) (30400) (21500) (39900) (34000) (51500) (51500)
–6.0 m *7850 7350 *10700 9900 *14150 *14150 *18550 *18550
(–19') (17200) (16100) (23500) (21800) (31100) (31100) (40800) (40800)
Arm length 2400 mm (7'10")
7.5 m *9700 7750 *9850 8600
(24') (21300) (17000) (21600) (18900)
6.0 m *9500 6400 *10300 8450
(19') (20800) (14000) (22600) (18600)
4.5 m 8500 5650 8950 5950 *11100 8150 *13500 11650 *18400 18150
(14') (18600) (12300) (19600) (13000) (24300) (17900) (29700) (25600) (40500) (40000)
3.0 m 7950 5250 8750 5800 11750 7800 *14900 10650
(9') (17500) (11500) (19200) (12700) (25800) (17100) (32800) (23400)
1.5 m 7850 5100 8600 5600 11400 7450 16150 10350
(4') (17200) (11200) (18800) (12300) (25100) (16400) (35500) (22700)
0.0 m 8050 5250 8450 5500 11150 7250 15800 10050 *15150 *15150
(0') (17700) (11500) (18600) (12100) (24600) (15900) (34800) (22000) (33400) (33400)
–1.5 m 8750 5700 11100 7200 *15600 9950 *19950 15600
(–4') (19200) (12500) (24400) (15800) (34400) (21900) (43900) (34300)
–3.0 m *9850 6650 *10850 7250 *14000 10100 *17550 15900 *20600 *20600
(–9') (21600) (14600) (23900) (15900) (30700) (22200) (38600) (34900) (45400) (45400)
–4.5 m *9300 8800 *10700 10150 *13700 *13700
(–14') (20400) (19300) (23500) (22300) (30100) (30100)
2C-79
LIFTING CAPACITY
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
7.5 m *8800 7000 *9100 8700
(24') (19400) (15300) (19900) (19100)
6.0 m 8700 5800 *8800 6050 *9600 8500
(19') (19100) (12700) (19300) (13300) (21100) (18700)
4.5 m 7800 5150 *8900 5900 *10450 8150 *12650 11750 *16850 *16850
(14') (17100) (11200) (19600) (13000) (23000) (17900) (27800) (25800) (37100) (37100)
3.0 m 7350 4800 *8700 5700 *11400 7750 *14400 10950
(9') (16100) (10500) (19100) (12500) (25100) (17000) (31700) (24000)
1.5 m 7200 4650 *8500 5500 11300 7350 *15650 10250
(4') (15800) (10200) (18600) (12100) (24900) (16200) (34400) (22600)
0.0 m 7400 4750 *8300 5350 11050 7100 15650 9900 *20500 15250
(0') (16200) (10400) (18300) (11700) (24200) (15600) (34400) (21700) (45100) (33500)
–1.5 m 7950 5100 *8250 5300 10900 7000 15500 9750 *20650 15250 *14800 *14800
(–4') (17400) (11200) (18100) (11600) (24000) (15300) (34100) (21400) (45500) (33500) (32600) (32600)
–3.0 m 9100 5900 10950 7000 *14400 9800 *18500 15450 *22800 *22800
(–9') (20000) (12900) (24000) (15400) (31700) (21500) (40700) (34000) (50200) (50200)
–4.5 m *9200 7500 *11900 10050 *15150 *15150 *18700 *18700
(–14') (20200) (16500) (26200) (22100) (33000) (33300) (41100) (41100)
–6.0 m *7850 *7850
(–19') (17200) (17200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-80
LIFTING CAPACITY
2C-81
LIFTING CAPACITY
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
7.5 m *9850 7000 *10150 8700
(24') (21700) (15300) (22200) (19100)
6.0 m 8700 5800 9050 6050 *10700 8500
(19') (19100) (12700) (19900) (13300) (23500) (18700)
4.5 m 7800 5150 8900 5900 *11700 8150 *14050 11750 *18650 18600
(14') (17100) (11200) (19600) (13000) (25700) (17900) (30900) (25800) (41000) (41000)
3.0 m 7350 4800 8700 5700 11750 7750 *16000 10950
(9') (16100) (10500) (19100) (12500) (25800) (17000) (35200) (24000)
1.5 m 7200 4650 8500 5500 11300 7350 16100 10250
(4') (15800) (10200) (18600) (12100) (24900) (16200) (35400) (22600)
0.0 m 7400 4750 8300 5350 11050 7100 15650 9900 *22400 15250
(0') (16200) (10400) (18300) (11700) (24200) (15600) (34400) (21700) (49300) (33500)
–1.5 m 7950 5100 82500 5300 10900 7000 15500 9750 *23000 15250 *16250 *16250
(–4') (17400) (11200) (18100) (11600) (24000) (15300) (34100) (21400) (50700) (33500) (35700) (35700)
–3.0 m 9100 5900 10950 7000 15550 9800 *20700 15450 *24950 *24950
(–9') (20000) (12900) (24000) (15400) (34200) (21500) (45500) (34000) (54900) (54900)
–4.5 m *10350 7500 *13400 10050 *17000 15900 *21000 *21000
(–14) (22800) (16500) (29400) (22100) (37400) (35000) (46200) (46200)
–6.0 m *8950 *8950
(–19) (19600) (19600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-82
LIFTING CAPACITY
PC400LC-7
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.90 m3 (2.49 cu.yd), Shoes: 700 mm (28") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.5 m *5750 *5750 *6700 6500
(24') (12600) (12600) (14700) (14200)
6.0 m *5750 5350 *8400 6450 *9150 8950
(19') (12600) (11700) (18500) (14100) (20100) (19700)
4.5 m *5950 4800 *8850 6250 *10100 8600 *12050 *12050
(14') (13000) (10500) (19500) (13700) (22100) (18900) (26500) (26500)
3.0 m *6250 4500 *9400 6050 *11100 8200 *13900 11600 *19450 17950
(9') (13700) (9900) (20700) (13300) (24400) (17900) (30600) (25400) (42800) (39500)
1.5 m 6800 4400 9850 5850 *12000 7800 *15400 10900 *20800 16600
(4') (14900) (9600) (21700) (12800) (26400) (17100) (33900) (23900) (45800) (36600)
0.0 m 7650 4500 9700 5650 *12500 7500 *16150 10400 *19800 16050
(0') (16800) (9800) (21300) (12400) (27500) (16400) (35500) (22900) (43600) (35300)
–1.5 m 8300 4800 9600 5550 *12500 7300 *16050 10200 *21500 15900 *12950 *12950
(–4') (18200) (10500) (21000) (12200) (27400) (16100) (35300) (22400) (47300) (35000) (28500) (28500)
–3.0 m 8700 5400 *9050 5600 *11750 7300 *15050 10200 *19700 16050 *19000 *19000
(–9') (19100) (11900) (19900) (12200) (25800) (16000) (33100) (22400) (43400) (35300) (41800) (41800)
–4.5 m *8550 6650 *9900 7450 *13000 10400 *16750 16350 *21750 *21750
(–14') (18700) (14500) (21800) (16300) (28600) (22800) (36800) (36000) (47900) (47900)
–6.0 m *7700 *7700 *9050 *9050 *11950 *11950
(–19') (16900) (16900) (19800) (19800) (26200) (26200)
Arm length 4000 mm (13'1")
7.5 m *4900 *4900 *7550 6650
(24') (10800) (10800) (16500) (14600)
6.0 m *4900 4850 *7800 6550
(19') (10700) (10600) (17100) (14400)
4.5 m *5050 4350 *8350 6350 *9350 8700
(14') (11000) (9600) (18300) (13900) (20600) (19100)
3.0 m *5300 4100 *8950 6100 *10500 8250 *12950 11750 *17750 *17750
(9') (11600) (9000) (19700) (13300) (23000) (18100) (28500) (25900) (39100) (39100)
1.5 m *5750 4000 *9550 5800 *11500 7800 *14700 11000 *20800 16900
(4') (12600) (8700) (2100) (12800) (25300) (17100) (32300) (24100) (45800) (37200)
0.0 m *6400 4050 9650 5600 *12200 7450 *15750 10400 *21900 16050 *8550 *8550
(0') (14000) (8900) (21200) (12300) (26800) (16300) (34700) (22900) (48200) (35300) (18800) (18800)
–1.5 m *7400 4300 9500 5450 *12400 7250 *16000 10100 *21850 15750 *12500 *12500
(–4') (16300) (9400) (20800) (12000) (27300) (15900) (35200) (22200) (48100) (34600) (27500) (27500)
–3.0 m *8200 4750 9450 5450 *12000 7150 *15400 10000 *20550 15750 *17350 *17350
(–9') (18000) (10400) (20700) (11900) (26400) (15700) (33900) (22000) (45300) (34600) (38100) (38100)
–4.5 m *8200 5700 *10700 7200 *13850 10100 *18150 15950 *23400 *23400
(–14') (18000) (12500) (23500) (15800) (30400) (22200) (39900) (35100) (51500) (51500)
–6.0 m *7850 7600 *10700 10250 *14150 *14150 *18550 *18550
(–19') (17200) (16700) (23500) (22500) (31100) (31100) (40800) (40800)
Arm length 2400 mm (9'6")
7.5 m *9700 8000 *9850 8900
(24') (21300) (17600) (21600) (19500)
6.0 m *9500 6600 *10300 8750
(19') (20800) (14500) (22600) (19200)
4.5 m *9450 5850 *9650 6150 *11100 8400 *13500 12000 *18400 *18400
(14') (20800) (12800) (21200) (13500) (24300) (18500) (29700) (26300) (40500) (40500)
3.0 m 9150 5450 *10050 6000 *11950 8050 *14900 10950
(9') (20100) (11900) (22000) (13100) (26200) (17600) (32800) (24100)
1.5 m 9000 5300 9850 5850 *12550 7700 *16150 10650
(4') (19800) (11600) (21700) (12800) (27600) (16900) (35600) (23400)
0.0 m 9250 5450 9750 5700 *12750 7500 *16300 10400 *15150 *15150
(0') (20400) (11900) (21400) (12500) (28000) (16500) (35900) (22800) (33400) (33400)
–1.5 m *9900 5900 *12250 7450 *15600 10300 *19950 16100
(–4') (21800) (12900) (27000) (16300) (34400) (22700) (43900) (35400)
–3.0 m *9850 6900 *10850 7500 *14000 10450 *17550 16400 *20600 *20600
(–9') (21600) (15100) (23900) (16500) (30700) (22900) (38600) (36000) (45400) (45400)
–4.5 m *9300 9100 *10700 10500 *13700 *13700
(–14') (20400) (19900) (23500) (23100) (30100) (30100)
2C-83
LIFTING CAPACITY
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
7.5 m *8800 7200 *9100 8950
(24') (19400) (15800) (19900) (19700)
6.0 m *8700 6000 *8800 6250 *9600 8750
(19') (19100) (13100) (19300) (13700) (21100) (19200)
4.5 m *8700 5300 *9150 6150 *10450 8400 *12650 12100 *16850 *16850
(14') (19100) (11700) (20100) (13400) (23000) (18500) (27800) (26600) (37100) (37100)
3.0 m 8450 4950 *9600 5900 *11400 8000 *14400 11300
(9') (18500) (10900) (21100) (13000) (25100) (17600) (31700) (24800)
1.5 m 8300 4850 9750 5700 *12150 7600 *15650 10600
(4') (18200) (10600) (21400) (12500) (26700) (16700) (34400) (23300)
0.0 m 8500 4950 9600 5550 *12500 7350 *16100 10200 *20500 15750
(0') (18700) (10800) (21100) (12200) (27500) (16100) (35400) (22500) (45100) (34600)
–1.5 m 9200 5300 9550 5500 *12250 7250 *15700 10100 *20650 15750 *14800 *14800
(–4') (20100) (11600) (20900) (12100) (27000) (15900) (34600) (22100) (45500) (34600) (32600) (32600)
–3.0 m *9400 6100 *11250 7300 *14400 10150 *18500 15950 *22800 *22800
(–9') (20700) (13400) (24700) (16000) (31700) (22300) (40700) (35100) (50200) (50200)
–4.5 m *9200 7800 *11900 10400 *15150 *15150 *18700 *18700
(–14') (20200) (17100) (26200) (22900) (33300) (33300) (41100) (41100)
–6.0 m *7850 *7850
(–19') (17200) (17200)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-84
LIFTING CAPACITY
2C-85
LIFTING CAPACITY
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
7.5 m *9850 7200 *10150 8950
(24') (21700) (15800) (22200) (19700)
6.0 m *9750 6000 *9850 6250 *10700 8750
(19') (21400) (13100) (21600) (13700) (23500) (19200)
4.5 m 8950 5300 10200 6150 *11700 8400 *14050 12100 *18650 *18650
(14') (19700) (11700) (22400) (13400) (25700) (18500) (30900) (26600) (41000) (41000)
3.0 m 8450 4950 1000 5900 *12750 8000 *16000 11300
(9') (18500) (10900) (21900) (13000) (28000) (17600) (35200) (24800)
1.5 m 8300 4850 9750 5700 13050 7600 *17450 10600
(4') (18200) (10600) (21400) (12500) (28700) (16700) (38400) (23300)
0.0 m 8500 4950 9600 5550 12750 7350 *17950 10200 *22400 15750
(0') (18700) (10800) (21100) (12200) (28100) (16100) (39500) (22500) (49300) (34600)
–1.5 m 9200 5300 9550 5500 12650 7250 *17550 10100 *23000 15750 *16250 *16250
(–4') (20100) (11600) (20900) (12100) (27800) (15900) (38600) (22100) (50700) (34600) (35700) (35700)
–3.0 m 10550 6100 *12600 7300 *16150 10150 *20700 15950 *24950 *24950
(–9') (23100) (13400) (27700) (16000) (35500) (22300) (45500) (35100) (54900) (54900)
–4.5 m *10350 7800 *13400 10400 *17000 16400 *21000 *21000
(–14') (22800) (17100) (29400) (22900) (37400) (36100) (46200) (46200)
–6.0 m *8950 *8950
(–19') (19600) (19600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-86
LIFTING CAPACITY
2C-87
LIFTING CAPACITY
2C-88
LIFTING CAPACITY
2C-89
LIFTING CAPACITY
2C-90
LIFTING CAPACITY
PC450-7E0, PC450-7
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.90 m3 (2.49 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.5 m *5550 *5550 *6600 5900
(24') (12100) (12100) (14500) (12900)
6.0 m *5550 4750 *8800 5850 *9600 8400
(19') (12100) (10400) (19300) (12900) (21100) (18500)
4.5 m *5750 4200 8750 5700 *10650 8050 *12800 11850
(14') (12600) (9200) (19300) (12500) (23400) (17600) (28100) (26000)
3.0 m *6100 3900 8500 5450 11700 7600 *14800 10950 *20800 17200
(9') (13400) (8500) (18700) (12000) (25700) (16600) (32600) (24100) (45800) (37800)
1.5 m 6200 3800 8250 5250 11200 7150 16150 10200 *23400 15700
(4') (13600) (8300) (18100) (11400) (24600) (15700) (35500) (22400) (51500) (34600)
0.0 m 6350 3900 8050 5050 10850 6850 15600 9650 *23050 15050
(0') (13900) (8500) (17700) (11000) (23800) (15000) (34300) (21200) (50700) (33100)
–1.5 m 6800 4200 7950 4950 10650 6650 15300 9450 *23000 14900 *15050 *15050
(–4') (14900) (9100) (17400) (10800) (23400) (14600) (33700) (20700) (50700) (32800) (33100) (33100)
–3.0 m 7700 4800 7950 4950 10650 6650 15300 9450 *21050 15050 *22200 *22200
(–9') (16900) (10500) (17500) (10900) (23400) (14500) (33700) (20700) (46400) (33100) (48800) (48800)
–4.5 m *8900 6000 *10450 6800 *13800 9650 *17850 15450 *23300 *23300
(–14') (19600) (13100) (23000) (14900) (30400) (21200) (39300) (34000) (51200) (51200)
–6.0 m *8000 *8000 *9350 *9350 *12650 *12650
(–19') (17600) (17600) (20500) (20500) (27900) (27900)
PC450LC-7E0, PC450LC-7
Conditions: Boom: 7060 mm (23'2"), Bucket (SAE): 1.90 m3 (2.49 cu.yd), Shoes: 600 mm (24") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3380 mm (11'1")
7.5 m *5550 *5550 *6600 6000
(24') (12100) (12100) (14500) (13200)
6.0 m *5550 4850 *8800 6000 *9600 8550
(19') (12100) (10600) (19300) (13100) (21100) (18800)
4.5 m *5750 4300 *9300 5800 *10650 8200 *12800 12000
(14') (12600) (9400) (20400) (12700) (23400) (17900) (28100) (26400)
3.0 m *6100 4000 96500 5550 *11750 7700 *14800 11150 *20800 17450
(9') (13400) (8700) (21200) (12200) (25800) (16900) (32600) (24500) (45800) (38400)
1.5 m 6700 3900 9400 5350 *12700 7300 *16450 10350 *23400 16000
(4') (14700) (8500) (20700) (11700) (27900) (16000) (36100) (22800) (51500) (35100)
0.0 m 7250 4000 9200 5150 12400 6950 *17250 9850 *23050 15350
(0') (15900) (8700) (20200) (11300) (27300) (15300) (37900) (21600) (50700) (33700)
–1.5 m 7750 4300 9100 5050 12200 6800 *17100 9600 *23000 15200 *15050 *15050
(–4') (17100) (9300) (19900) (11000) (26800) (14900) (37600) (21100) (50700) (33400) (33100) (33100)
–3.0 m 8800 4900 9100 5050 12200 6750 *16050 9600 *21050 15350 *22200 *22200
(–9') (19300) (10700) (20000) (11100) (26800) (14800) (35300) (21100) (46400) (33700) (48800) (48800)
–4.5 m *8900 6100 *10450 6950 *13800 9800 *17850 15700 *23300 *23300
(–14') (19600) (13400) (23000) (15200) (30400) (21600) (39300) (34600) (51200) (51200)
–6.0 m *8000 *8000 *9350 *9350 *12650 *12650
(–19') (17600) (17600) (20500) (20500) (27900) (27900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-91
LIFTING CAPACITY
2C-92
LIFTING CAPACITY
2C-93
LIFTING CAPACITY
2C-94
LIFTING CAPACITY
2C-95
LIFTING CAPACITY
2C-96
LIFTING CAPACITY
PC600-8
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *6950 *6950
(30') (15300) (15300)
6.1 m *6850 *6850 *9800 9700 *10950 *10950
(20') (15100) (15100) (21600) (21400) (24100) (24100)
3.0 m *7550 6050 *11200 8900 *13500 12100 *17100 17050
(10') (16700) (13400) (24700) (19600) (29700) (26700) (37700) (37600)
0m 8100 6000 10900 8150 14500 10850 *19850 15450 *16550 *16550
(0') (17900) (13300) (24100) (18000) (32000) (23900) (43700) (34100) (36400) (36400)
–3.0 m 9750 7250 10750 8050 14200 10550 *18550 15250 *24150 *24150 *19450 *19450
(–10') (21500) (16000) (23700) (17700) (31300) (23200) (40900) (33600) (53300) (53300) (42900) (42900)
–6.1 m *9550 *9550 *11950 *11950 *15700 *15700
(–20') (21000) (21000) (26300) (26300) (34700) (34700)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *6500 *6500
(30') (14400) (14400)
6.1 m *6350 *6350 *9650 9300 *10700 *10700
(20') (14000) (14000) (21300) (20600) (23600) (23600)
3.0 m *7150 6200 *11000 8600 *13200 11950 *16900 *16900 *24200 *24200
(10') (15800) (13600) (24200) (19000) (29100) (23600) (37200) (37200) (53300) (53300)
0m 8400 6150 10700 7950 14500 10750 *19600 15400 *21300 *21300
(0') (18500) (13600) (23600) (17500) (31900) (23800) (43200) (34000) (47000) (47000)
–3.0 m *10300 7600 10550 7850 *14100 10500 *18250 15150 *24150 *24150 *21900 *21900
(–10') (22700) (16800) (23300) (17300) (31000) (23200) (40300) (33400) (53300) (53300) (48300) (48300)
–6.1 m *9500 *9500 *10800 *10800 *14500 *14500
(–20') (20900) (20900) (23800) (23800) (32000) (32000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-97
LIFTING CAPACITY
PC600-8
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8150 *8150
(30') (18000) (18000)
6.1 m *7950 7450 12150 9300 *13450 13350
(20') (17600) (16500) (26800) (20600) (29600) (29400)
3.0 m 8350 6200 11400 8600 15700 11950 *21000 17400 *29850 27900
(10') (18400) (13600) (25100) (19000) (34700) (26300) (46300) (38300) (65800) (61500)
0m 8400 6150 10700 7950 14500 10750 20950 15400 *25450 24800
(0') (18500) (13600) (23600) (17500) (31900) (23800) (46200) (34000) (56100) (54700)
–3.0 m 10300 7600 10550 7850 14200 10500 20650 15150 *30200 24900 *26150 *26150
(–10') (22700) (16800) (23300) (17300) (31300) (23200) (45500) (33400) (66500) (54900) (57600) (57600)
–6.1 m *12450 *12450 *14050 *14050 *18650 *18650
(–20') (27400) (27400) (30900) (30900) (41200) (41200)
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m *9700 *9700
(30') (21400) (21400)
6.1 m *8950 *8950 *11950 *11950
(20') (19700) (19700) (26400) (26400)
3.0 m *9800 7600 11400 8600 *14000 12000 *17650 17600 *24700 *24700
(10') (21600) (16800) (25100) (18900) (30900) (26500) (38900) (38800) (54500) (54500)
0m 10300 7650 10850 8050 14700 10950 *19900 15700 *27600 25250
(0') (22700) (16900) (23900) (17800) (32400) (24200) (43900) (34600) (60800) (55700)
–3.0 m *11500 10050 *12850 10900 *16800 14950 *22950 *22950 *30500 *30500
(–10') (23500) (22100) (28400) (24100) (37100) (33000) (50600) (50600) (67200) (67200)
2C-98
LIFTING CAPACITY
Conditions: Boom: 6600 mm, Bucket (SAE): 3.5 m3, Shoes: 600 mm
(Heavy-lifting: "OFF") unit: k
A MAX 9.1 m 7.6 m 6.1 m 4.6 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm
9.1 m *9700 *9700
6.1 m *8950 *8950 *11950 *11950
3.0 m *9800 7600 11400 8600 *14000 12000 *17650 17600 *24700 *24700
0m 10300 7650 10850 8050 14700 10950 *19900 15700 *27600 25250
–3.0 m *11500 10050 *12850 10900 *16800 14950 *22950 *22950 *30500 *30500
–4.6 m *10650 *10650 *12900 *12900 *17500 *17500 *22300 *22300
2C-99
LIFTING CAPACITY
PC600-7
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8000 *8000
(30') (17600) (17600)
6.1 m *7900 7250 *10150 8950 *11450 *11450
(20') (17400) (16000) (22400) (19700) (25300) (25300)
3.0 m 8150 6050 11000 8300 *14000 11400 *18200 16350
(10') (18000) (13300) (24200) (18300) (30800) (25100) (40100) (86100)
0m 8200 6050 10350 7700 13500 9950 *20100 14800 *14500 *14500
(0') (18100) (18300) (22900) (17000) (29800) (21900) (44300) (32700) (32000) (32000)
–3.0 m 10150 7550 10350 7650 13500 9950 *18100 14800 *23150 *23150 *20950 *20950
(–10') (22400) (16600) (22800) (16900) (29800) (22000) (39900) (32600) (51000) (51000) (46200) (46200)
–6.1 m *9250 *9250 *10400 *10400 *13550 *13550
(–20') (20500) (20500) (22900) (22900) (29800) (29800)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *7550 *7550 *8400 *8400
(30') (16600) (16600) (18500) (18500)
6.1 m *7450 *7450 *10100 8650 *11300 *11300
(20') (16400) (16400) (22300) (19100) (24900) (24900)
3.0 m *8550 6300 10850 8150 *13800 11400 *17200 15900 *23350 *23350
(10') (18800) (18900) (24000) (17900) (30400) (25100) (38000) (35100) (51500) (51500)
0m 8700 6350 10300 7600 14100 10450 *20000 15050 *19500 *19500
(0') (19200) (14000) (22700) (16800) (31000) (23000) (44100) (33200) (43000) (43000)
–3.0 m *10900 8150 *13750 10300 *17900 14950 *23300 *23300 *23850 *23850
(–10') (24000) (18000) (30300) (22700) (39500) (38000) (51300) (51800) (52500) (52500)
2C-100
LIFTING CAPACITY
PC600-7
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m *8750 *8750
(30') (19300) (19300)
6.1 m *8300 *8300 *11700 *11700
(20') (18300) (18300) (25800) (25800)
3.0 m 9300 7050 10850 8150 *13950 11550 *17650 17100 *24700 *24700
(10') (20500) (15600) (24000) (17900) (30800) (25500) (38900) (37700) (54500) (54500)
0m 9650 7100 10350 7650 14150 10550 *19000 13900 *28100 *24650
(0') (21300) (15700) (22800) (16800) (31200) (23200) (41900) (30600) (61900) (54400)
–3.0 m 11650 9350 *13200 10400 *16800 13850 *23750 *23750 *29900 *29900
(–10') (25700) (20700) (29200) (23000) (37100) (30600) (52300) (52300) (65900) (65900)
2C-101
LIFTING CAPACITY
PC600LC-8
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *6950 *6950
(30') (15300) (15300)
6.1 m *6850 *6850 *9800 *9800 *10950 *10950
(20') (15100) (15100) (21600) (21600) (24100) (24100)
3.0 m *7550 6200 *11200 9050 *13500 12350 *17100 *17100
(10') (16700) (13700) (24700) (20000) (29700) (27200) (37700) (37700)
0m 9350 6150 *12250 8350 *15100 11050 *19850 15750 *16550 *16550
(0') (20600) (13600) (27000) (18400) (33300) (24400) (43700) (34800) (36400) (36400)
–3.0 m *10150 7400 *11400 8200 *14350 10750 18550 15550 *24150 *24150 *19450 *19450
(–10') (22400) (16400) (25100) (18100) (31700) (23700) (40900) (34200) (53300) (53300) (42900) (42900)
–6.1 m *9550 *9550 *11950 *11950 *15700 *15700
(–20') (21000) (21000) (26300) (26300) (34700) (34700)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *6500 *6500
(30') (14400) (14400)
6.1 m *6350 *6350 *9650 9500 *10700 *10700
(20') (14000) (14000) (21300) (20900) (23600) (23600)
3.0 m *7150 6350 *11000 8800 *13200 12150 *16900 *16900 *24200 *24200
(10') (15800) (14000) (24200) (19400) (29100) (26800) (37200) (37200) (53300) (53300)
0m *9200 6300 *11950 8100 *14950 11000 *19600 15700 *21300 *21300
(0') (20300) (13900) (26400) (17900) (33000) (24200) (43200) (34700) (47000) (47000)
–3.0 m *10350 7800 *10700 8000 *14100 10700 *18250 15450 *24150 *24150 *21900 *21900
(–10') (22900) (17200) (23600) (17600) (31000) (23600) (40300) (34000) (53300) (53300) (48300) (48300)
–6.1 m *9500 *9500 *10800 *10800 *14500 *14500
(–20') (20900) (20900) (23800) (23800) (32000) (32000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-102
LIFTING CAPACITY
PC600LC-8
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8150 *8150
(30') (18000) (18000)
6.1 m *7950 7650 *12250 9500 *13450 *13450
(20') (17600) (16800) (27000) (20900) (29600) (29600)
3.0 m *8900 6350 13050 8800 *16550 12150 *21000 17700 *29850 *28350
(10') (19600) (14000) (28800) (19400) (36500) (26800) (46300) (39000) (65800) (62500)
0m 9700 6300 12300 8100 16700 11000 24400 15700 *25450 25250
(0') (21400) (13900) (27200) (17900) (36800) (24200) (53800) (34700) (56100) (55700)
–3.0 m 11900 7800 12200 8000 16400 10700 *22950 15450 *30200 25400 *26150 *26150
(–10') (26200) (17200) (26900) (17600) (36200) (23600) (50600) (34000) (66500) (56000) (57600) (57600)
–6.1 m *12450 *12450 *14050 *14050 *18650 *18650
(–20') (27400) (27400) (30900) (30900) (41200) (41200)
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m *9700 *9700
(30') (21400) (21400)
6.1 m *8950 *8950 *11950 *11950
(20') (19700) (19700) (26400) (26400)
3.0 m *9800 7750 *11800 8750 *14000 12250 *17650 *17650 *24700 *24700
(10') (21600) (17100) (26000) (19300) (30900) (27000) (38900) (38900) (54500) (54500)
0m *11500 7800 *12100 8250 *15300 11200 *19900 16000 *27600 25700
(0') (25400) (17200) (26700) (18200) (33700) (24700) (43900) (35300) (60800) (56700)
–3.0 m *11500 10250 *12850 11150 *16800 15250 *22950 *22950 *30500 *30500
(–10') (25400) (22600) (28400) (24600) (37100) (33600) (50600) (50600) (67200) (67200)
2C-103
LIFTING CAPACITY
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24"),
13500 kg (29,760 lb) counterweight
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8150 *8150
(30') (18000) (18000)
6.1 m *7950 *7950 *12250 10950 *13450 *13450
(20') (17600) (17600) (27000) (24200) (29600) (29600)
3.0 m *8900 *7550 *13950 10250 *16600 14000 *21000 20200 *29850 *29850
(10') (19600) (16600) (30800) (22600) (36600) (30900) (46300) (44500) (65800) (65800)
0m 11150 7550 14100 9600 *18800 12850 *24450 18250 *25500 *25500
(0') (24600) (16700) (31000) (21100) (41500) (28300) (53900) (40200) (56200) (56200)
–3.0 m *13350 9250 *13750 9500 *17800 12600 *22950 17950 *30150 29250 *26200 *26200
(–10') (29400) (20400) (30300) (20900) (39300) (27700) (50500) (39600) (66500) (64500) (57800) (57800)
–6.1 m *12400 *12400 *14000 *14000 *18600 *18600
(–20') (27400) (27400) (30800) (30800) (41000) (41000)
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.30 m3 (3.0 cu.yd), Shoes: 600 mm (24"),
13500 kg (29,260 lb) counterweight
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4300 mm (14'1")
9.1 m *6600 *6600 *9000 *9000
(30') (14500) (14500) (19800) (19800)
6.1 m *6450 *6450 *11200 *11200
(20') (14200) (14200) (24700) (24700)
3.0 m *7000 6500 *13250 10600 *15650 14400 *19750 *19750 *27750 *27750
(10') (15500) (14300) (29200) (23400) (34500) (31700) (43500) (43500) (61200) (61200)
0m *8500 6400 14200 9700 *18400 12950 *23950 18250 *21700 *21700
(0') (18700) (14200) (31400) (21400) (40600) (28600) (52800) (40200) (47800) (47800)
–3.0 m 11050 7450 13850 9400 *18350 12300 *23700 17650 *31650 28600 *20200 *20200
(–10') (24300) (16500) (30600) (20700) (40500) (27100) (52300) (38900) (69700) (63100) (44500) (44500)
–6.1 m *11900 11350 *13950 12950 *18250 *18250 *23550 *23550 *31250 *31250
(–20') (26200) (25000) (30700) (28500) (40200) (40200) (62000) (52000) (69000) (69000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-104
LIFTING CAPACITY
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24"),
13500 kg (29,620 lb) counterweight
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *11850 *11850
(30') (26100) (26100)
6.1 m *10950 *10950 *14950 *14950
(20') (24200) (24200) (33000) (33000)
3.0 m *11900 9150 14800 10250 *17550 14100 *21900 20400 *30450 *30450
(10') (26300) (20100) (32700) (22600) (38600) (31100) (48200) (44900) (67100) (67100)
0m 13550 9250 14250 9700 *19150 13050 *24800 18500 *34150 *29600
(0') (29900) (20400) (31400) (21400) (42300) (28800) (54700) (40800) (75300) (65300)
–3.0 m *14700 12000 *16350 13000 *21250 17750 *28700 *28700 *36800 *36800
(–10') (32400) (26400) (36000) (28700) (46900) (39200) (63200) (63200) (81100) (81100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2C-105
LIFTING CAPACITY
2C-106
LIFTING CAPACITY
PC600LC-7
Conditions: Boom: 7660 mm (25'2"), Bucket (SAE): 2.70 m3 (3.53 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *8000 *8000
(30') (17600) (17600)
6.1 m *7900 7400 *10150 9100 *11450 *11450
(20') (17400) (16400) (22400) (20100) (25300) (25300)
3.0 m *8900 6200 *11500 8450 *14000 11650 *18200 16650
(10') (19700) (13600) (25400) (18700) (30800) (25600) (40100) (36800)
0m 9500 6200 12000 7900 *15000 10200 *20100 15150 *14500 *14500
(0') (21000) (13700) (26400) (17400) (33100) (22400) (44300) (33400) (32000) (32000)
–3.0 m *10600 7700 *10850 7850 *13850 10200 *18100 15100 *23150 *23150 *20950 *20950
(–10') (23300) (17000) (23900) (17300) (80600) (22500) (39900) (33300) (51000) (51000) (46200) (46200)
–6.1 m *9250 *9250 *10400 *10400 *13550 *13550
(–20') (20500) (20500) (22900) (22900) (29800) (29800)
Conditions: Boom: 7300 mm (23'11"), Bucket (SAE): 2.80 m3 (3.66 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3500 mm (11'6")
9.1 m *7550 *7550 *8400 *8400
(30') (16600) (16600) (18500) (18500)
6.1 m *7450 *7450 *10100 8850 *11300 *11300
(20') (16400) (16400) (22300) (19500) (24900) (24900)
3.0 m *8550 6450 *11350 8300 *13800 11600 *17200 16200 *23350 *23350
(10') (18800) (14300) (25100) (18300) (30400) (25600) (38000) (35700) (51500) (51500)
0m 10100 6500 11900 7800 *15250 10650 *20000 15350 *19500 *19500
(0') (22200) (14400) (26800) (17200) (33600) (23500) (44100) (33800) (48000) (48000)
–3.0 m *10900 8350 *13750 10550 *17900 15250 *23300 *23300 *23850 *23850
(–10') (24000) (18400) (30300) (23200) (39500) (33600) (51300) (51300) (52500) (52500)
2C-107
LIFTING CAPACITY
PC600LC-7
Conditions: Boom: 6600 mm (21'8"), Bucket (SAE): 3.5 m3 (4.58 cu.yd), Shoes: 600 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm (9'6")
9.1 m *8750 *8750
(30') (19300) (19300)
6.1 m *8300 *8300 *11700 *11700
(20') (18300) (18300) (25800) (25800)
3.0 m *9300 7200 *11700 8350 *13950 11800 *17650 17400 *24700 *24700
(10') (20500) (15900) (25800) (18400) (30800) (26000) (38900) (38400) (54500) (54500)
0m 11200 7300 11950 7800 *15400 10750 *19000 14200 *28100 25150
(0') (24600) (16100) (26400) (17300) (33900) (23700) (41900) (31300) (61900) (55500)
–3.0 m *11650 9350 *13200 10650 *16800 14200 *23750 *23750 *29900 *29900
(–10') (25700) (20700) (29200) (23500) (37100) (31300) (52300) (52300) (65900) (65900)
2C-108
LIFTING CAPACITY
PC800-8
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *7700 *7700 *12150 *12150 *13950 *13950
(19') (17000) (17000) (26700) (26700) (30800) (30800)
3.0 m *9000 7050 *14500 12000 *17850 16200 *23750 22900
(9') (19800) (15500) (32000) (26400) (39400) (35700) (52400) (50500)
0m 9250 6950 14100 10750 18900 14300 *26650 20250 *13450 *13450
(0') (20400) (15300) (31100) (23700) (41600) (31600) (58700) (44700) (29700) (29700)
–3.0 m 10900 8250 13700 10350 18400 13850 *25150 20000 *26650 *26650 *19000 *19000
(–9') (24100) (18100) (30200) (22800) (40500) (30500) (55400) (44000) (58800) (58800) (41900) (41900)
–6.0 m *13700 13500 *14800 14650 *19000 *19000 *24050 *24050
(–19') (30200) (29800) (32600) (32300) (41900) (41900) (53100) (53100)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *8700 8300 *13900 13600 *15900 *15900
(19') (19200) (18300) (30700) (30000) (35100) (35100)
3.0 m 9250 7050 15400 12000 *20400 16200 *27050 22900
(9') (20400) (15500) (34000) (26400) (45000) (35700) (59600 (50500)
0m 9250 6950 14100 10750 18900 14300 27200 20250 *15050 *15050
(0') (20400) (15300) (31100) (23700) (41600) (31600) (59900) (44700) (33100) (33100)
–3.0 m 10900 8250 13700 10350 18400 13850 26900 20000 *29500 *29500 *21100 *21100
(–9') (24100) (18100) (30200) (22800 (40500) (30500) (59300) (44000) (65000) (65000) (46500) (46500)
–6.0 m *15950 13500 *17150 14650 *21950 21100 *27800 *27800
(–19') (35100) (29800) (37800) (32300) (48400) (46500) (61200) (61200)
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
6.0 m *3950 *3950 *6950 *6950
(19') (8700) (8700) (15400) (15400)
3.0 m *4500 *4500 *9050 7050 *11750 *11750 *14200 *14200 *18350 *18350
(9') (9900) (9900) (19900) (15500) (25900) (25900) (31300) (31300) (40400) (40400)
0m *5600 4700 8400 6200 14150 10750 *17800 14350 *24100 20850 *15050 *15050
(0') (12400) (10300) (18600) (13700) (31200) (23700) (39200) (31700) (53100) (46000) (33200) (33200)
–3.0 m 7300 5250 7950 5750 13050 9700 17700 13150 *25600 19050 *20000 *20000 *12800 *12800
(–9') (16100) (11600) (17500) (12700) (28800) (21400) (39000) (29000) (56400) (42100) (44100) (44100) (28200) (28200)
–6.0 m 9850 7250 13000 9650 17600 13100 *23050 19200 *31050 *31050 *22450 *22450
(–19') (21700) (16000) (28600) (21200) (38800) (28900) (50800) (42300) (68400) (68400) (49500) (49500)
2C-109
LIFTING CAPACITY
PC800-8
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
6.0 m *6350 *6350 *7850 7700 *10700 *10700
(19') (14000) (14000) (17300) (17000) (23600) (23600)
3.0 m *7300 6050 9300 7050 *13300 12400 *16250 *16250 *21350 *21350
(9') (16100) (13300) (20500) (15600) (29400) (27300) (35900) (35900) (47100) (47100)
0m 7950 5900 8650 6450 14250 10850 19150 14550 *25900 20700 *14500 *14500
(0') (17500) (13000) (19000) (14200) (31400) (23900) (42300) (32100) (57100) (45600) (32000) (32000)
–3.0 m 9100 6750 13500 10150 18150 13650 *25950 19700 *23400 *23400 *15850 *15850
(–9') (20100) (14900) (29700) (22300) (40100) (30100) (57200) (43400) (51600) (51600) (35000) (35000)
–6.0 m *12600 9950 *13200 10400 *17000 13950 *21750 20300 *28500 *28500 *28600 *28600
(–19') (27800) (22000) (29100) (23000) (37500) (30800) (48000) (44700) (62900) (62900) (63000) (63000)
2C-110
LIFTING CAPACITY
Conditions: Boom: 8040 mm, Bucket (SAE): 3.4 m3, Shoes: 610 mm
(Heavy-lifting: "ON") unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm
9.0 m *10150 *10150 *11350 *11350
6.0 m *10550 8650 *12850 *12850 *14750 *14750
3.0 m 9600 7250 *15400 12250 *18950 16700 *25300 23850
0m 9600 7100 14400 10900 19450 14650 28200 20950 *22150 *22150
–3.0 m 11500 8600 14000 10500 18950 14200 *27050 20650 *35650 35050 *28900 *28900
–6.0 m *14850 14850 *15250 15200 *20000 *20000 *25600 *25600
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-111
LIFTING CAPACITY
PC750-7
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *9350 *8650 *12950 12700 *15150 *15150 *18900 *18900
(19') (20600) (19100) (28500) (28000) (33400) (33400) (41700) (41700)
3.0 m 9650 7350 14750 11400 *18450 14850 *25700 21900
(9') (21300) (16200) (32500) (25200) (40700) (32800) (56700) (48300)
0m 9800 7350 13750 10450 18550 14100 26900 20100
(0') (21600) (16200) (30300) (23000) (40900) (31000) (59300) (44300)
–3.0 m 12000 9100 13500 10250 18300 13850 *24850 20150 *29350 *29350 *21350 *21350
(–9') (26500) (20000) (29800) (22600) (40300) (30500) (54800) (44500) (64700) (64700) (47100) (47100)
–6.0 m *14350 *14350 *17000 *17000
(–19') (31600) (31600) (37500) (37500)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *10550 8650 *14800 12700 *17250 *17250 *21350 *21350
(19') (23300) (19100) (32700) (28000) (38000) (38000) (47100) (47100)
3.0 m 9650 7350 14750 11400 19400 14850 28850 21900
(9') (21300) (16200) (32500) (25200) (42800) (32800) (63700 (48300)
0m 9800 7350 13750 10450 18550 14100 26900 20100
(0') (21600) (16200) (30300) (23000) (40900) (31000) (59300) (44300)
–3.0 m 12000 9100 13500 10250 18300 13850 26950 20150 *32500 *32500 *23750 *23750
(–9') (26500) (20000) (29800) (22600 (40300) (30500) (59500) (44500) (71700) (71700) (52300) (52300)
–6.0 m *16650 *16650 *19700 *19700
(–19') (36800) (36800) (43400) (43400)
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
6.0 m *4550 *4550 *6850 *6850
(19') (10000) (10000) (15100) (15100)
3.0 m *5300 *5300 *9500 7400 *12650 *12650 *15500 *15500 *20450 *20450
(9') (11700) (11700) (20900) (16300) (27900) (27900) (34200) (34200) (45100) (45100)
0m *6950 5800 9000 6750 *15000 11600 19050 15750 *25600 22550 *13650 *13650
(0') (15300) (12800) (19800) (14900) (33100) (25600) (42000) (34700) (56400) (49700) (30100) (30100)
–3.0 m 8950 6650 14250 10850 19350 14700 -26100 *21350 *21100 *21100 *13900 *13900
(–9') (19700) (14700) (31400) (23900) (42700) (32400) (57600) (47100) (46500) (46500) (30600) (30600)
–6.0 m *11750 9650 *13450 10950 *16550 13950 *22400 21700 *29850 *29850 *25250 *25250
(–19') (25900) (21200) (29600) (24100) (36400) (30800) (49400) (47900) (65800) (65800) (55600) (55600)
2C-112
LIFTING CAPACITY
PC750-7
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 12.0 m (39') 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
6.0 m *7500 7500 *11500 *11500
(19') (16600) (16500) (25400) (25400)
3.0 m 8450 6350 8650 6500 *14150 11650 *17500 15950 *23400 22950
(9') (18700) (14000) (19000) (14300) (31200) (25700) (38600) (35200) (51600) (50600)
0m 8450 6250 13700 10400 18600 14100 *27000 20200 *13600 *13600
(0') (18600) (13800) (30200) (23000) (41000) (31100) (59500) (44500) (30000) (30000)
–3.0 m 10000 7450 13200 9900 17950 13500 *25950 19700 *25600 *25600 *17800 *17800
(–9') (22000) (16400) (29100) (21900) (39600) (29800) (57300) (43400) (56400) (56400) (39300) (39300)
–6.0 m *13850 12100 *15800 14000 *20350 *20350 *26300 *26300
(–19') (30500) (26600) (34800) (30900) (44900) (44900) (58000) (58000)
2C-113
LIFTING CAPACITY
PC750SE-7
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.0 m3 (5.23 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m *13600 10850 *13800 11600 *15600 *15600 *18800 *18800
(19') (30000) (23900) (30400) (25600) (34400) (34400) (41500) (41500)
3.0 m 11800 8900 14100 10750 *19050 15100 *25300 21950
(9') (26000) (19600) (31100) (23700) (42000) (33300) (55800) (48400)
0m 12250 9200 13350 10050 18350 13850 27000 20150 *27550 *27550
(0') (27000) (20300) (29400) (22100) (40400) (30500) (59600) (44400) (60800) (60800)
–3.0 m *16000 12800 *17500 13950 *23150 20450 *29900 *29900 *37500 *37500
(–9') (35200) (28200) (38600) (30800) (51000) (45100) (66000) (66000) (82700) (82700)
2C-114
LIFTING CAPACITY
PC800-7
Conditions: Boom: 8040 mm (26'11"), Bucket (SAE): 3.4 m3 (4.45 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *10550 9050 *11950 *11950 *14000 *14000 *17500 *17500
(19') (23200) (20000) (26400) (26400) (30900) (30900) (38600) (38600)
3.0 m 10100 7650 *14150 12050 *17700 16500 *24000 23400
(9') (22300) (16800) (31200) (26600) (39100) (36300) (52900) (51600)
0m 10250 7700 14450 11000 19600 14850 *25900 21300
(0') (22600) (16900) (31900) (24200) (43200) (32800) (57100) (47000)
–3.0 m 12700 9600 14250 10800 *18400 14650 *23550 21400 *30250 *30250 *28050 *28050
(–9') (28000) (21100) (31500) (23800) (40600) (32300) (51900) (47200) (66700) (66700) (61900) (61900)
–6.0 m *12850 *12850 *15550 *15550
(–19') (28400) (28400) (34300) (34300)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m 11750 9050 *13850 13450 *16100 *16100 *19900 *19900
(19') (25900) (20000) (30500) (29700) (35500) (35500) (43900) (43900)
3.0 m 10100 7650 15600 12050 *20350 16500 *27400 23400
(9') (22300) (16800) (34400) (26600) (44900) (36300) (60500) (51600)
0m 10250 7700 14450 11000 19600 14850 28500 21300
(0') (22600) (16900) (31900) (24200) (43200) (32800) (62900) (47000)
–3.0 m 12700 9600 14250 10800 19350 14650 *27050 21400 *34700 *34700 *31100 *31100
(–9') (28000) (21100) (31500) (23800) (42700) (32300) (59700) (47200) (76500) (76500) (68600) (68600)
–6.0 m *15150 *15150 *18250 *18250
(–19') (33400) (33400) (40200) (40200)
PC800SE-7
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.3 m3 (5.62 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2945 mm (9'8")
6.0 m *13250 11950 *13450 12800 *15250 *15250 *18500 *18500
(19') (29200) (26400) (29600) (28200) (33700) (33700) (40800) (40800)
3.0 m 13000 9950 *15200 11950 *18750 16700 *25000 24300
(9') (28600) (21900) (33500) (26300) (41300) (36800) (55100) (53500)
0m 13550 10300 14750 11250 20200 15450 *26850 22450 *27200 *27200
(0') (29800) (22700) (32500) (24800) (44600) (34100) (59200) (49500) (59900) (59900)
–3.0 m *15650 14250 *17200 15550 *22850 22750 *29600 *29600 *37150 *37150
(–9') (34500) (31400) (37900) (34300) (50300) (50200) (65300) (65300) (81900) (81900)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2945 mm (9'8")
6.0 m *15300 11950 *15550 12800 *17500 *17500 *21050 *21050
(19') (33800) (26400) (34200) (28200) (38600) (38600) (46400) (46400)
3.0 m 13000 9950 15450 11950 *21450 16700 *28400 24300
(9') (28600) (21900) (34100) (26300) (47300) (36800) (62700) (53500)
0m 13550 10300 14750 11250 20200 15450 29750 22450 *30200 *30200
(0') (29800) (22700) (32500) (24800) (44600) (34100) (65600) (49500) (66600) (66600)
–3.0 m *18150 14250 *19850 15550 *26200 22750 *33850 *33850 *42600 *42600
(–9') (40000) (31400) (43800) (34300) (57800) (50200) (74700) (74700) (93900) (93900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2C-115
LIFTING CAPACITY
A MAX 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
9.1 m *8300 *8300
(30') (18300) (18300)
6.1 m *8700 *8700 *13700 *13700 *15600 *15600
(20') (19200) (19200) (30200) (30200) (34400) (34400)
3.0 m *10100 9100 *16350 14550 *19950 19450 *26400 *26400
(10') (22300) (20100) (36000) (32000) (44000) (42900) (58200) (58200)
0.0 m *13200 9050 *18200 13300 *22700 17600 *29800 24700 *15650 *15650
(0') (29100) (20000) (40100) (29300) (50000) (38800) (65700) (54400) (34500) (34500)
–3.0 m *14900 10700 *17750 12900 *22150 17100 *28250 24400 *30400 *30400 *21500 *21500
(–10') (32900) (23600) (39200) (28500) (48900) (37700) (62300) (53700) (67000) (67000) (47400) (47400)
–6.1 m *15950 *15950 *16450 *16450 *21250 *21250 *27000 *27000
(–20') (35100) (35100) (36300) (36300) (46900) (46900) (59500) (59500)
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 2.8 m3 (3.6 cu.yd), Shoes: 810 mm (32"),
Counterweight: 13600 kg (29,980 lb)
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 12.2 m (40') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4600 mm (15'1")
9.1 m *7000 *7000 *8150 *8150
(30') (15400) (15400) (18000) (18000)
6.1 m *7250 *7250 *11200 *11200 *12100 *12100
(20') (16000) (16000) (24600) (24600) (26700) (26700)
3.0 m *8300 7950 *13000 11400 *15050 14900 *18200 *18200 *23700 *23700
(10') (18300) (17500) (28700) (25100) (33200) (32900) (40100) (40100) (52200) (52200)
0m *10450 7850 *14600 10450 *17500 13400 *21850 17850 *28950 25100 *16900 *16900
(0') (23100) (17300) (32200) (23000) (38500) (29600) (48100) (39300) (63800) (55300) (37200) (37200)
–3.0 m *13300 8950 *14700 9950 *18000 12700 *22500 16900 *29100 24100 *26700 *26700
(–10') (29300) (19700) (32400) (22000) (39700) (28100) (49600) (37300) (64200) (53100) (58900) (58900)
–6.1 m *14700 13000 *14800 13050 *19100 17250 *24400 *24400 *31950 *31950
(–20') (32500) (28700) (32600) (28800) (42100) (38000) (53800) (53800) (70400) (70400)
Conditions: Boom: 8200 mm (26'11"), Bucket (SAE): 3.1 m3 (4.05 cu.yd), Shoes: 810 mm (32"),
Counterweight: 13600 kg (29,980 lb)
(Heavy-lifting: "ON") unit: kg (lb)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5600 mm (18'4")
9.1 m *4600 *4600 *4800 *4800
(30') (10100) (10100) (10600) (10600)
6.1 m *4700 *4700 *7650 *7650 *9000 *9000
(20') (10300) (10300) (16900) (16900) (19900) (19900)
3.0 m *5250 *5250 *10400 8800 *11650 11450 *13350 *13350 *15950 *15950 *20400 *20400
(10') (11600) (11600) (22900) (19400) (25700) (25200) (29400) (29400) (35200) (35200) (44900) (44900)
0.0 m *6500 6450 *11650 8000 *13550 10250 *16200 13300 *20300 17800 *27000 25250 *17550 *17550
(0') (14300) (14200) (25700) (17700) (29900) (22600) (35800) 29300) (44700) (39300) (59500) (55700) (38700) (38700)
–3.0 m *9050 7200 *11900 7600 *14350 9550 *17500 12300 *21950 16450 *28800 23500 *22950 *22950
(–10') (20000) (15900) (26200) (16800) (31600) (21000) (38600) (27100) (48400) (36200) (63500) (51800) (50600) (50600)
–6.1 m *12550 9750 *15900 12250 *20100 16400 *25900 23600 *34800 *34800
(–20') (27600) (21500) (35100) (27000) (44400) (36100) (57100) (52100) (76800) (76800)
2C-116
LIFTING CAPACITY
Conditions: Boom: 8040 mm, Bucket (SAE): 3.4 m3, Shoes: 810 mm
(Heavy-lifting: "ON") unit: kg
2C-117
LIFTING CAPACITY
PC800SE-8
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.0 m3 (5.23 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m *12650 10350 *13150 12650 *14700 *14700
(19') (27900) (22800) (29000) (27900) (32400) (32400)
3.0 m 11300 8550 14850 11450 *18200 15850 *23800 22950
(9') (24900) (18900) (32800) (25200) (40100) (34900) (52500) (50600)
0m 11550 8650 13850 10450 18800 14200 *26650 20400 *28900 *28900
(0') (25400) (19100) (30500) (23000) (41400) (31300) (58800) (45000) (63800) (63800)
–3.0 m *14900 11350 *18350 14050 *23950 20400 *31500 *31500 *36900 *36900
(–9') (32800) (25000) (40500) (31000) (52800) (45000) (69500) (69500) (81300) (81300)
2C-118
LIFTING CAPACITY
PC850-8
Conditions: Boom: 8040 mm (26'5"), Bucket (SAE): 3.4 m3 (4.45 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3600 mm (11'10")
6.0 m *9300 8650 *11050 *11050 *12800 *12800
(19') (20500) (19000) (24400) (24400) (28200) (28200)
3.0 m 9600 7250 *13250 12250 *16450 *16450 *22050 *22050
(9') (21200) (15900) (29200) (27000) (36200) (36200) (48600) (48600)
0m 9600 7100 14400 10900 *18700 14650 *24850 20950 *19900 *19900
(0') (21200) (15700) (31800) (24000) (41200) (32400) (54800) (46200) (43900) (43900)
–3.0 m 11500 8600 14000 10500 *18150 14200 *23400 20650 *30950 *30950 *26100 *26100
(–9') (25400) (19000) (30900) (23200) (40000) (31300) (51600) (45600) (68300) (68300) (57500) (57500)
–6.0 m *12600 *12600 *12900 *12900 *17100 *17100 *21900 *21900
(–19') (27700) (27700) (28500) (28500) (37700) (37700) (48300) (48300)
2C-119
LIFTING CAPACITY
PC850SE-8
Conditions: Boom: 7100 mm (23'4"), Bucket (SAE): 4.3 m3 (5.62 cu.yd), Shoes: 610 mm (24")
(Heavy-lifting: "OFF") unit: kg (lb)
A MAX 9.0 m (29') 7.5 m (24') 6.0 m (19') 4.5 m (14') 3.0 m (9')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2920 mm (9'7")
6.0 m *12650 11500 *13150 *13150 *14700 *14700
(19') (27900) (25300) (29000) (29000) (32400) (32400)
3.0 m 12500 9650 *15000 12700 *18200 17450 *23800 *23800
(9') (27500) (21300) (33100) (28000) (40100) (38500) (52500) (52500)
0m 12800 9800 15300 11750 *20250 15800 *26650 22650 *28900 *28900
(0') (28200) (21600) (33700) (25900) (44700) (34900) (58800) (49900) (63800) (63800)
–3.0 m *14900 12700 *18350 15700 *23950 22650 *31500 *31500 *36900 *36900
(–9') (32800) (28000) (40500) (34600) (52800) (49900) (69500) (69500) (81300) (81300)
2C-120
LIFTING CAPACITY
PC1250-8
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 5.0 m3 (6.54 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "ON") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *15200 *15200 *18000 *18000
(30') (33500) (33500) (39700) (39700)
6.1 m *15950 13200 *20050 17400 *22950 *22950 *27900 *27900
(20') (35150) (29100) (44200) (38400) (50600) (50600) (61500) (61500)
3.0 m 15650 11850 16400 12500 20850 16100 27000 20850 *34950 27650
(10') (34500) (26200) (36100) (27500) (46000) (35500) (59500) (46000) (77100) (60900)
0.0 m 16250 12300 19950 15200 24200 18200 34400 26100
(0') (35900) (27100) (44000) (33500) (53400) (40200) (75800) (57500)
–3.0 m 19950 15250 20000 15250 25600 19550 34600 26300 *43850 38400 *39250 *39250
(–10') (44000) (33600) (44100) (33700) (56400) (43100) (76300) (57900) (96700) (84700) (86600) (86600)
–6.1 m *23500 *23500 *25400 *25400 *32550 *32550
(–20') (51800) (51800) (56100) (56100) (71800) (71800)
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 4.0 m3 (5.2 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "ON") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4500 mm (14'9")
9.1 m *9300 *9300
(30') (20500) (20500)
6.1 m *9650 *9650 *16650 13700 *18150 18000 *20550 *20550
(20') (21300) (21300) (36700) (30200) (40000) (39700) (45400) (45400)
3.0 m *10950 10200 16650 12750 21200 16400 *25600 21300 *32350 28500
(10') (24200) (22500) (36700) (28100) (46700) (36100) (56500) (47000) (71400) (62800)
0.0 m *13650 10400 15850 11950 19900 15150 24550 18500 34450 26100 *29300 29300
(0') (30100) (23000) (34900) (26400) (43900) (33400) (54100) (40800) (75900) (57600) (64600) (64600)
–3.0 m 16400 12400 19550 14800 25100 19050 34000 25700 *46350 37500 *31900 *31900
(–10') (36200) (27300) (43100) (32600) (55400) (42000) (75000) (56600) (102200) (82600) (70300) (70300)
–6.1 m *21750 18700 *23650 20000 *28850 25200 *38200 *38200 *48900 *48900
(–20') (48000) (41300) (52100) (44100) (63600) (55500) (84300) (84300) (107800) (107800)
2C-121
LIFTING CAPACITY
PC1250-8
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 3.4 m3 (4.4 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "ON") unit: kg (Ib)
A MAX 13.7 m (45') 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5700 mm (18'8")
9.1 m *5900 *5900
(30') (1300) (13000)
6.1 m *6050 *6050 *11050 10950 *14950 14350
(20') (13400) (13400) (24300) (24100) (32900) (31600)
3.0 m *6800 *6800 13550 10250 17050 13100 *19800 16900 *23450 22050 *29300 *29300 *39750 *39750
(10') (15000) (15000) (29900) (22600) (37600) (28900) (43700) (37200) (51700) (48600) (64600) (64600) (87600) (87600)
0.0 m *8400 *8400 12850 9600 15950 12050 20100 15300 25900 19800 34800 26450 *31200 *31200
(0') (18500) (18500) (28400) (21100) (35200) (26600) (44300) (33800) (57100) (43600) (76700) (58300) (68800) (68800)
–3.0 m *11500 10150 15500 11600 19300 14600 24850 18800 33600 25300 *47600 36800
(–10') (25400) (22400) (34100) (25600) (42600) (32100) (54800) (41500) (74100) (55800) (105000) (81100)
–6.1 m 18600 14100 19750 15000 25200 19150 *33250 25850 *42350 37850
(–20') (41000) (31100) (43500) (33000) (55600) (42200) (73300) (56900) (93300) (83400)
2C-122
LIFTING CAPACITY
PC1250-7
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 5.0 m3 (6.54 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *15200 *15200 *15500 *15500
(30') (33500) (33500) (34200) (34200)
6.1 m *15850 12900 *17300 17100 *19950 *19950 *24400 *24400
(20') (34900) (28500) (38100) (37700) (44000) (44000) (53800) (53800)
3.0 m 15350 11600 16050 12200 *19800 15750 *23900 20500 *30550 27150
(10') (33800) (25600) (35400) (26900) (43700) (34800) (52700) (45200) (67400) (59800)
0.0 m 15950 12050 19600 14900 23750 17850 *32650 25600
(0') (35200) (26500) (43200) (32800) (52400) (39300) (72000) (56400)
–3.0 m *19600 14900 *19650 14950 *24750 19150 *30750 25800 *38350 37750 *39250 *39250
(–10') (43200) (32900) (43300) (33000) (54600) (42200) (67800) (56800) (84500) (83200) (86600) (86600)
–6.1 m *20150 *20150 *21900 *21900 *28150 *28150
(–20') (44500) (44500) (48200) (48200) (62100) (62100)
2C-123
LIFTING CAPACITY
PC1250LC-7
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 5.2 m3 (6.80 cu.yd), Shoes: 1000 mm (39")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *15200 *15200 *15500 *15500
(30') (33500) (33500) (34200) (34200)
6.1 m *15850 13850 *17300 *17300 *19950 *19950 *24400 *24400
(20') (34900) (30500) (38100) (38100) (44000) (44000) (53800) (53800)
3.0 m *16750 12500 *17150 13150 *19800 16850 *23900 21800 *30550 28850
(10') (36900) (27600) (37800) (29000) (43700) (37200) (52700) (48100) (67400) (63600)
0.0 m *18050 12950 *21250 15950 *24700 19150 *32650 27300
(0') (39800) (28600) (46900) (35200) (54400) (42200) (72000) (60100)
–3.0 m *19600 16000 *19650 16050 *24750 20450 *30750 27450 *38350 *38350 *39250 *39250
(–10') (43200) (35300) (43300) (35400) (54600) (45100) (67800) (60600) (84500) (84500) (86600) (86600)
–6.1 m *20150 *20150 *21900 *21900 *28150 *28150
(–20') (44500) (44500) (48200) (48200) (62100) (62100)
2C-124
LIFTING CAPACITY
PC1250SP-8
Conditions: Boom: 7800 mm (25'7"), Bucket (SAE): 6.7 m3 (8.8 cu.yd), Shoes: 700 mm (28")
(Heavy-lifting: "ON") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3400 mm (11'2")
9.1 m *11700 *11700 *17050 *17050
(30') (25800) (25800) (37600) (37600)
6.1 m *12250 *12250 *16300 16100 *24350 22600 *28750 *28750 *36350 *36350
(20') (27000) (27000) (35900) (35600) (53700) (49800) (63400) (63400) (80100) (80100)
3.0 m *14600 13700 20150 15300 26950 20750 *33850 27000 *47450 41150
(10') (32200) (30200) (44400) (33800) (59500) (45700) (74700) (59600) (104600) (90700)
0.0 m 19300 14550 19400 14600 25600 19450 31750 23500 *48750 38650
(0') (42600) (32000) (42800) (32200) (56400) (42900) (70000) (51800) (107500) (85200)
–3.0 m *23900 19550 *23950 19550 *30750 24850 *41450 39250 *52450 *52450
(–10') (52700) (43100) (52900) (43100) (67800) (54800) (91300) (86500) (115700) (115700)
–6.1 m
(–20')
2C-125
LIFTING CAPACITY
PC1800-6
Conditions: Boom: 8700 mm (28'7"), Bucket (SAE): 12.0 m3 (15.7 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 3900 mm (12'10")
6.1 m *19700 *19700 *26950 *26950 *31150 *31150
(20') (43400) (43400) (59400) (59400) (69600) (69600)
3.0 m *23050 19800 *30350 *30350 *36950 *36950 *44100 *44100 *63950 *63950
(10') (50800) (43700) (66900) (66900) (81500) (81500) (97300) (97300) (142100) (142100)
0.0 m *24050 20450 *31650 *28300 *39150 37050 *49800 *49800 *65500 *65500 *35500 *35500
(0') (53100) (45100) (69800) (62400) (86400) (81600) (110700) (110700) (145600) (145600) (78300) (78300)
–3.0 m *24900 *24900 *28050 27650 *35700 *35700 *45050 *45050 *57250 *57250 *67850 *67850 *50450 *50450
(–10') (54900) (54900) (61800) (60900) (78700) (78700) (99300) (99300) (127200) (127200) (150800) (150800) (112100) (112100)
–6.1 m *23050 *23050 *29000 *29000 *37050 *37050 *45300 *45300
(–20') (50800) (50800) (63900) (63900) (81700) (81700) (99900) (99900)
Conditions: Boom: 9100 mm (29'10"), Bucket (SAE): 10.0 m3 (13.1 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 12.2 m (40') 10.7 m (35') 9.1 m (30') 7.6 m (25') 6.1 m (20') 4.6 m (15')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 4100 mm (13'5")
9.1 m *20000 *20000 *25100 *25100
(30') (44100) (44100) (55300) (55300)
6.1 m *21450 *21050 *27200 26900 *30650 *30650 *35550 *35550
(20') (47300) (46400) (60000) (59300) (67500) (67500) (78400) (78400)
3.0 m *24850 19250 *29850 24950 *34900 31900 *42100 41650 *53250 *53250
(10') (54800) (42500) (65800) (55000) (76900) (70700) (92800) (91800) (117420) (117420)
0.0 m 27000 19850 *30900 23350 *37050 29550 *43350 36150 *56950 51550 *64150 *54150
(0') (59500) (43700) (68200) (51500) (81600) (65200) (95600) (79700) (125570) (113670) (141450) (141450)
–3.0 m *28250 23650 *34650 28800 *41000 35250 *53100 50600 *66950 *66950 *64000 *64000
(–10') (52300) (52100) (76400) (63500) (90400) (77800) (117080) (111570) (147620) (147620) (141120) (141120)
–6.1 m *27850 *27850 *30400 *30400 *36250 *36250 *48800 *48800 *60150 *60150
(–20') (61400) (61400) (67000) (67000) (79900) (79900) (107600) (107600) (132630) (132630)
2C-126
LIFTING CAPACITY
PC1800-6
Conditions: Boom: 11400 mm (37'5"), Bucket (SAE): 5.6 m3 (7.3 cu.yd), Shoes: 810 mm (32")
(Heavy-lifting: "OFF") unit: kg (Ib)
A MAX 15.2 m (50') 12.2 m (40') 9.1 m (30') 6.1 m (20') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 5000 mm (16'5")
12.2 m *13150 *13150
(40') (29000) (29000)
9.1 m *13000 *13000 *13350 *13350
(30') (28600) (28600) (29400) (29400)
6.1 m *13300 12250 *14600 *14600 *18550 *18550 *26550 *26500
(20') (29300) (27000) (32100) (32100) (40900) (40900) (58500) (58500)
3.0 m *13900 11150 *16050 *15000 *21500 *21500 *32350 *32350
(10') (30600) (24600) (35400) (33100) (47400) (47400) (71300) (71300)
0.0 m *14750 11150 *17100 *13800 *23600 21150 *35500 33850
(0') (32500) (24600) (37700) (30400) (52000) (46600) (78200) (74700)
–3.0 m *15750 12450 *16900 13300 *24100 20000 *35600 32600 *33850 *33850
(–10') (34800) (27500) (37300) (29300) (53100) (44100) (78500) (71900) (74700) (74700)
–6.1 m *16750 16000 *22000 20200 *32500 *32500 *49350 *49350 *38500 *38500
(–20') (36900) (35200) (48500) (44500) (71600) (71600) (108800) (108800) (84800) (84800)
–9.1 m *16700 *16700 *23950 *23950 *36000 *36000
(–30') (36800) (36800) (52800) (52800) (79400) (79400)
2C-127
MEMO
SECTION 2D
ATTACHMENTS
CONTENTS
Buckets & rippers for backhoe:
Ripper bucket ....................................................... 2D-2
Trapezoidal bucket .............................................. 2D-2
Slope finishing bucket ........................................ 2D-2
Ditch cleaning bucket ......................................... 2D-2
Single-shank ripper ............................................. 2D-2
Clamshell bucket ................................................. 2D-2
Coal bucket and chip bucket .............................. 2D-3
Chip yard bucket ................................................. 2D-3
Attachments for general construction:
Telescopic arm (box slide type) ......................... 2D-4
Telescopic arm (upper arm sliding type) ........... 2D-4
2-piece booms + rotary arm (corner shovel) ..... 2D-5
Offset boom ......................................................... 2D-6
Spike hammer ...................................................... 2D-6
Super long front ................................................... 2D-6
Vibratory pile driver ............................................. 2D-7
Road ripper .......................................................... 2D-7
Hydraulic breaker ................................................ 2D-8
Quick coupler (hydraulic mechanism type) ...... 2D-9
Quick coupler (mechanical) .............................. 2D-10
Attachments for logging:
Rotary log grapple ............................................. 2D-11
2D-1
Buckets & Rippers for ATTACHMENTS
Backhoe
Ripper Bucket
Suitable for digging rock bed or hard clayey soil
when normal buckets cannot penetrate deep
enough. Loading is also possible.
Trapezoidal Bucket
Performs digging and sloping simultaneously on a
drainage or irrigation canal. Using this bucket will
leave the digging profile shaped as a cross-section.
Single-shank Ripper
This ripper is used for site preparation prior to
digging work, when it becomes necessary to remove
rocks, pavement for other obstacles. Also effective
for pulling out tree stumps.
Clamshell Bucket
• Improved work efficiency with the clamshell
bucket pushing method.
• Handy 360-degree manual rotation
• Superb earth digging and discharge performance
2D-2
Buckets & Rippers for ATTACHMENTS
Backhoe
2D-3
Attachments for General ATTACHMENTS
Construction
2D-4
Attachments for General ATTACHMENTS
Construction
• 2-piece boom
The 2-piece boom can be installed singly for
wider working range.
• Rotary arm
The excavator, of which can be rotated 360
degrees, can be widely applied to miscellaneous
works.
WORKING RANGE
CORNER SHOVEL SPECS (EQUIPPED WITH 2-PIECE BOOMS & ROTARY ARM)
MODEL PC120 PC200 PC78US
OPERATING WEIGHT kg 12900 19800 8820
HORSEPOWER kW(PS)/rpm 64(87)/2200 99.3(135)/2000 40.5(55)/2100
STANDARD BUCKET CAPACITY M3 0.35 0.6 0.28
ROTARY ARM SWING SPEED rpm 8.0 7.0 10.0
WORKING RANGE
A MAX.DIGGING HEIGHT mm 8475 9810 9025
B MAX.DUMPING HEIGHT mm 6095 6965 6945
C MAX.DIGGING DEPTH mm 5245 6395 4445
D MAX.DIGGING REACH mm 8180 10000 7945
E MIN.SWING RADIUS mm 2780 3530 2500
F TAIL SWING RADIUS mm 2130 2750 1430
DIMENSION
LENGTH x HEIGHT x WIDTH mm 7460x2780x2490 9260x2905x2800 6445x2770x2365
PC60-7B & PC78US : WHEN BLADE IS INSTALLED.
BUCKET CAPACITY : WHEN CONFORMED TO FORMER JIS, STD BUCKET CAPACITY CHANGES AS INDICATED IN [ ].
2D-5
Attachments for General ATTACHMENTS
Construction
Offset Boom
• Unique parallelogram type offset boom for
perfectly vertical excavation of side ditches.
• Bucket offset parallels the direction the machine
is moving.
• Precise excavation close to any structure is no
longer a problem.
• A single touch precisely offsets the bucket.
NOTE: Single linkage type by other manufacturer is
also available.
Spike Hammer
This hammer is suitable for chipping concrete
structures such as tunnels, slopes of dams,
breakwaters, etc. when they are repaired and
constructed. It can chip the concrete surfaces
powerfully.
An air compressor is required separately.
2D-6
Attachments for General ATTACHMENTS
Construction
Road Ripper
• As the ripper is light, pitching can be restrained
when stripping roadbed.
• To improve penetration into the roadbed, the road
ripper tip is thinner than conventional ones
• To facilitate stripping work, the tip bottom is linear
in shape.
• To increase digging force, the distance between
the arm top pin and the tooth tip is short.
Crushing force
55 ton~100 ton (PC120 class)
65 ton~110 ton (PC200 class)
2D-7
Attachments for General ATTACHMENTS
Construction
Hydraulic Breaker
• The KOMATSU hydraulic breaker design
incorporates only two internal moving parts, Mini range
offering reliability and long life.
• Each breaker has a wide range of oil flow
allowing for mounting of the same breaker on a
wide range of equipment, suiting a variety of
applications such as Constructions, Demolition,
Recycling, Mining and Quarrying.
• With breakers available in 15 models from 73 kg
to 4000 kg class, you can be assured of finding
just the right capabilities. JTHB08 JTHB10 JTHB20 JTHB30 JTHB40 JTHB50
Breaker model Base machine
JTHB08 PC09, PC10MR
JTHB10 PC15MR Medium range
JTHB20 PC20MR
JTHB30 PC27MR, PC30MR
JTHB40 PC35MR
JTHB50 PC40MR, PC45MR
JTHB60 PC78US, WB70A
WB91R–WB98A, WB140PS,
JTHB65
WB150PS
JTHB70 PC120–PC138US
JTHB100 PC160LC
JTHB150 PC200–PC228US
JTHB190 PC220–PC230
JTHB60 JTHB65 JTHB70 JTHB100 JTHB150
JTHB230 PC300–PC350
JTHB310 PC400, PC450
JTHB400 PC600 Large range
2D-8
Attachments for General ATTACHMENTS
Construction
Simple
• Attachments can be changed easily and quickly
from the operator’s seat without modification.
Light and strong
• Two-piece housing structure and high-tensile
steel make the unit light and very durable.
2D-9
Attachments for General ATTACHMENTS
Construction
2D-10
Attachments for ATTACHMENTS
Logging
2D-11
MEMO
SECTION 2E
HYDRAULIC
LOADING SHOVELS
CONTENTS
Features .................................................................... 2E-2
Specifications ........................................................... 2E-4
Dimensions ............................................................... 2E-7
Working ranges, digging force ............................... 2E-9
Component dimensions and weights .................. 2E-10
Ground pressure .................................................... 2E-21
Loading shovel buckets ........................................ 2E-22
Model selection ...................................................... 2E-23
Production .............................................................. 2E-24
2E-1
Features HYDRAULIC
LOADING SHOVELS
2E-2
Features HYDRAULIC
LOADING SHOVELS
Komatsu hydraulic system HYDRO-PILOT
• Multi-circuit hydraulic system with electronic load governor, pump flow summation capability, and oil flow
priority based on demand, for fast working cycles and high productivity
• All main hydraulic circuits are run at one pressure level only, simplifying pressure adjustment and service
• Each circuit with connection facility for pressure check gauges
• Changing from front shovel to backhoe is simple
• Un-pressurised hydraulic tank with large pump suction lines and low pump speed prevents risk of
cavitation
• Each hydralulic circuit protected with high pressure filters
• Full flow 10 µm return line filters for system safety and for supplementary circuits 3 µm by-pass filter to
improve oil quality for long component lifetime
• Swing out hydraulic cooler for simple cleaning to keep the cooling efficiency
• Float valves for improved hydraulic system
Heavy-duty shovel undercarriage design
• Komatsu Mining track system with oscillating shoes for optimum response to rugged mining ground
conditions
• Lifetime lubricated rollers
• Automatic track tensioning system
• Track shoes in high quality casting steel and engineered by finite element method
• Precision hard facing of contact surfaces for long term performance
• Different width of shoes available for best performance in softer mining ground conditions
Attachments
• Front shovel attachment available for all mining applications
• Closed box design combining steel plates and castings, engineered by finite element method for full
lifetime
• Wide selection of buckets and customised options
• Bucket wear package ranges to meet all mining conditions
• Attachment pin sealing arrangement for reduced bearing wear-parts costs
Service
• Hydraulically assisted ladder for ease and convenience access
• Upper structure walkway allows safe access to all service points
• Walk in machinery house provides all weather protection for service attention
• Automatic central lubrication system for attachment and main swing bearing
• Swing down service arm for fast, ground level refilling and evacuation and the minimizing of leakages
during service
• Complete machine delivered in pre-tested modules for fast erection on job site
2E-3
Specifications HYDRAULIC
LOADING SHOVELS
Model
Item
PC400-7 PC400-7E0 PC400-7*** q
PC400-7E0***
OPERATING WEIGHT* kg (lb) 43100 (95,020) 43100 (95,020) 44100 (97,200) 44100 (97,220)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 259 (347)/1850 270 (362)/1900 259 (347)/1850 270 (362)/1900
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 246 (330)/1850 257 (345)/1900 246 (330)/1850 257 (345)/1900
BUCKET CAPACITY RANGE m3 2.6 2.6 2.6 2.6
(cu.yd) (3.4) (3.4) (3.4) (3.4)
PERFORMANCE:
Swing speed RPM 9.0 9.4 9.0 9.4
Max.travel speed km/h (MPH) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4) Hi 5.5 (3.4)
Mi 4.4 (2.7) Mid 4.4 (2.7) Mi 4.4 (2.7) Mid 4.4 (2.7)
Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9) Lo 3.0 (1.9)
DIMENSIONS: See the page of DIMENSIONS
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model SAA6D125E SAA6D125E-5 SAA6D125E SAA6D125E-5
No. of cylinders- mm 6-125 × 150 6-125 × 150 6-125 × 150 6-125 × 150
bore × stroke (in) (4.92 × 5.91) (4.92 × 5.91) (4.92 × 5.91) (4.92 × 5.91)
Piston displacement ltr. (cu.in) 11.04 (673) 11.04 (673) 11.04 (673) 11.04 (673)
HYDRAULIC SYSTEM: 2 × Variable 1 × Variable 2 × Variable 1 × Variable
Hydraulic pump Piston Piston Piston Piston
Max. oil flow ltr. (U.S. Gal)/min. 690 (182) 690 (116) 690 (182) 690 (116)
Max. oil pressure kg/cm2 (PSI) 355 (5050) 355 (5050) 355 (5050) 355 (5050)
TRACK SHOES:
Width/ground pressure mm (in)/ 600 (24)/ 600 (24)/ 600 (24)/ 600 (24)/
kg/cm2 (PSI) 0.83 (11.8) 0.83 (11.8) 0.85 (12.1) 0.85 (12.1)
CAPACITY (Refilled):
Fuel tank ltr. (U.S. Gal) 650 (172) 650 (1727) 650 (172) 650 (1727)
Hydraulic oil tank 248 (65.5) 248 (65.5) 248 (65.5) 248 (65.5)
MACHINE SPEC:
Boom mm (ft.in) 4000 (13'1") 4000 (13'1") 4000 (13'1") 4000 (13'1")
Arm mm (ft.in) 2900 (9'6") 2900 (9'6") 2900 (9'6") 2900 (9'6")
Bucket m3 (cu.yd) 2.6 (3.4) 2.60 (3.4) 2.6 (3.4) 2.60 (3.4)
2E-4
Specifications HYDRAULIC
LOADING SHOVELS
Model q q
PC600-7 PC600-8 PC600LC-7 PC600LC-8
Item
OPERATING WEIGHT* kg (lb) 61100 (134,700) 61300 (135,120) 62200 (137,130) 62300 (137,350)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 323 (433)/1800 323 (433)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 320 (429)/1800 320 (429)/1800
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 287 (385)/1800 288 (368)/1800 287 (385)/1800 288 (368)/1800
BUCKET CAPACITY RANGE m3 4.0 4.0 4.0 4.0
(cu.yd) (5.2) (5.2) (5.2) (5.2)
PERFORMANCE:
Swing speed RPM 8.3 8.3 8.3 8.3
Max.travel speed km/h (MPH) Hi 4.9 (3.0) Hi 4.9 (3.0) Hi 4.9 (3.0) Hi 4.9 (3.0)
2E-5
Specifications HYDRAULIC
LOADING SHOVELS
Model
PC1800-6 PC3000-6 PC4000-6 PC5500-6
Item
OPERATING WEIGHT* kg (lb) 180000 (396,830) 250000 (551,150) 380000 (837,750) 527000 (1,161,820)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 676 (908)/1800 9401 (260)/1800 1400 (1875)/1800 1880 (2520)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM
BUCKET CAPACITY RANGE m3 11 10 ~ 20 16 ~ 28 20 ~ 36
(cu.yd) (14.4) (13.1) (26.2) (20.9) (36.6) (26.2) (47.1)
PERFORMANCE:
Swing speed RPM 4.5 4.6 4.0 3.4
Max.travel speed km/h (MPH) 2.7 (1.7) 2.4 (1.5) 2.1 (1.3) 2.2 (1.4)
Model
Item PC8000-6
OPERATING WEIGHT* kg (lb) 700000 (1,543,220)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 3000 (4020)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM
BUCKET CAPACITY RANGE m3 28 ~ 50
(cu.yd) (36.6) (65.4)
PERFORMANCE:
Swing speed RPM 3.5
Max.travel speed 2.2 (1.4)
km/h (MPH)
2E-6
Dimensions HYDRAULIC
LOADING SHOVELS
L E
D
M
K F
C
G
I
A
H
B J
FVBH0104
A B C D E F G H I J K L M
mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
3605 2715
PC400-7 (11'10") (8'11")
555 2740 3340
3645 (1'10") (9') (11') 2885
PC400-7E0
4020 5025 1320 (12'0") 2995 3265 600 (9'6") 8455 4400
(13'2") (16'6") (4'4") 3605 (9'10") (10'9") (24") 3490 2715 (27'9") (14'5")
PC400-7***
(11'10") 685 2890 (11'5") (8'11")
3645 (2'3") (9'6") 2990** 2885
PC400-7E0*** (9'10")
(12'0") (9'6")
PC400LC-7 3605 2715
(11'10") 550 2740 3440 (8'11")
3645 (1'10") (9') (11'3") 2885
PC400LC-7E0
4350 5355 1320 (12'0") 2995 3265 700 (9'6") 8455 4400
(14'3") (17'7") (4'4") 3605 (9'10") (10'9") (28") 3590 2715 (27'9") (14'5")
PC400LC-7***
(11'10") 685 2890 (11'9") (8'11")
3645 (2'3") (9'6") 3090** 2885
PC400LC-7E0*** (10'2")
(12'0") (9'6")
PC600-7 4250 5370
(13'11") (17'7") 1370 3675 3295 790 3900 3075 8815 5540
4600 5690 (4'6") (12'1") (10'10") (2'7") (12'10") (10'1") (28'11") (18'2")
PC600LC-7
(15'1") (18'8") 3195 3300 600
4250 5360 (10'6") (10'10") (24") 3900
PC600-8 (13'11") (17'7") 1365 3775 3280 780 (12'10") 8915 5530
4600 5710 (4'6") (12'5") (10'9") (2'7") 3190** (29'3") (18'2")
PC600LC-8 (10'6")
(15'1") (18'9")
3500 4110
4500 5810 1560 4245 3195 3560 840 (11'6") 610 (13'6") 3445 9865 5640
PC750-7
(14'9") (19'1") (5'1") (13'11") (10'6") (11'8") (2'9") 2780** (24") 3390** (11'4") (32'4") (18'6")
(9'1") (11'1")
4110
4500 5810 1560 4400 3195 3560 840 3500 610 (13'6") 3670 9965 5640
PC800-8
(14'9") (19'1") (5'1") (14'5") (10'6") (11'8") (2'9") (11'6") (24") 3390** (12') (32'8") (18'8")
(11'1")
4995 6425 1790 4810 3470 4120 990 3900 700 4600 3925 10940 6200
PC1250-7 (16'5") (21'1") (5'10") (15'9") (11'5") (13'6") (3'3") (12'10") (28") (15'1") (12'11") (35'11") (20'4")
4995 6425 1790 4870 3470 4120 990 3900 700 4600 5180 10940 6200
PC1250-8 (16'5") (21'1") (5'10") (16'0") (11'5") (13'6") (3'3") (12'10") (28") (15'1") (17') (35'11") (20'4")
5780 7445 2080 6140 5055 6510 730 4600 810 5410 4535 13230 8180
PC1800-6
(19') (24'5") (6'10") (20'2") (16'7") (21'4") (2'5") (15'1") (32") (17'9") (14'11") (43'5") (26'10")
** When retracted
*** Variable gauge
2E-7
Dimensions HYDRAULIC
LOADING SHOVELS
N L
E D
F M K
C
G
I
H A
J B
FVBH0108
A B C D E F G H I J K L M N
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
6000 7910 2710 5950 5990 7485 920 4800 800 5600 5280 13500 7930 6780
PC3000-6
(19'8") (25'11") (8'11") (19'6") (19'8") (24'7") (3') (15'9") (31'5") (18'4") (17'4") (44'4") (26'6") (22'3")
PC4000-6 6245 8375 2980 6500 7067 8260 915 5350 1200 6550 6027 14100 9000 7650
(20'6") (27'6") (9'9") (21'4") (23'2") (27'1") (3') (17'7") (47") (21'6") (19'9") (46'3") (29'6") (25'1")
7425 9720 3240 7260 7270 8535 995 6190 1350 7150 6342 16370 10000 7725
PC5500-6
(24'4") (31'11") (10'8") (23'10") (23'10") (28'0") (3'3") (20'4") (53") (23'6") (20'10") (53'9") (32'10") (25'4")
7945 10580 3470 8410 8300 9500 1144 6650 1500 8150 7030 18200 10500 9070
PC8000-6 (26'1") (34'9") (11'5") (27'7") (27'3") (31'2") (3'9") (21'10") (59") (26'9") (23'1") (59'9") (34'5") (29'9")
2E-8
Working Ranges HYDRAULIC
Digging Force LOADING SHOVELS
G
Boom le
ngth
A
th
ng B
le
Arm
F
C
E
D FVBH0105
A
B
C F
E
D
FVBH0109
2E-9
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC600-7/PC600LC-7
Four-part structure
(1) Work equipment ass’y (L/S) 16.2t (35,710 lb)
Width 2090 (6'10")
2830 (9'3")
8580 (28'2")
Three-part strucure
(1)
(3) Undercarriage Work equipment ass’y
PC600-7 16.4t (36,160 lb)
PC600LC-7 17.4t (38,360 lb)
(5) Base machine
875 (2'11") PC600-7 33.9t (74,740 lb)
PC600LC-7 35.0t (77,160 lb)
(4'2")
1260
(4)
3") 50 7 ") 50
(6' 0( (7' 0(
1'8 Other
10 1'8 10
19 ") 23 ")
2E-10
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC600-8/PC600LC-8
Four-part structure
(1) Work equipment ass’y (L/S) 16.2t (35,710 lb)
Width 2090 (6'10")
2830 (9'3")
8580 (28'2")
Three-part strucure
(1)
(3) Undercarriage Work equipment ass’y
PC600-8 16.3t (35,930 lb)
PC600LC-8 17.3t (38,140 lb)
(5) Base machine
875 (2'11") PC600-8 34.1t (75,180 lb)
PC600LC-8 35.1t (77,380 lb)
(4'2")
1260
(4)
Weight : 10.75t 11.8U.S.ton
6'3
") 50 7") 50 Other
0( 0( (7' 0(
1 1'8 10 1'8
19 ") 23 ")
***
2E-11
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC750-7
Four-part structure
(1) Work equipment ass’y (L/S) 18.7t (41,230 lb)
5 (9'4")
2885
9500
0 (31'2")
Three-part strucure
(1)
(3) Undercarriage 20.7t (45,640 lb)
1305 Work equipment ass'y
(4'3")
(4'9")
5810 (19'1")
(*3730 (12'3"))
3620 (11'11")
(4) Other 10.0t (22,050 lb)
319
5 (1
830 ") 0'6
")
9
(2' 6840 (22'5")
(1'7")
470
(6'0")
1530
(4)
(3'7")
1090
2E-12
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC800-8
Four-part structure
(1) Work equipment ass’y (L/S) 19.6t (43,210 lb)
2885 (9'4")
9500 (31'2")
Three-part strucure
(1)
(3) Undercarriage 21.2t (46,740 lb)
1380 Work equipment ass'y
(4'6")
(4'9")
5720 (12'2" )
(4) Other 10.1t (22,270 lb)
1790 (5'10")
")
3'1 6900 (22'8")
0( 31
95
95 (10
'6"
)
1540 (5'1")
72kg (159lb)
(4)
17
2. 8")
(5' 90 0(
10 7
")
Other
50
50 " ) 0(
'3"
)
0( (1 0'6 1'8
")
(6 1'8
00 ") 00
19 32
2E-13
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1250-7
Posture for Transportation 4 units for transportation (PC1250-7 STD spec.)
(lenght X height X width) (1/2)
(1) Work equipment assembly 27.5t (30.3 U.S. ton) (3) Undercarriage 30.0t (33.1 U.S. ton)
1585(5'2")
7.1t 5650x1500x2000
(7.8USt) (18'6")x(4'11")x(6'7") FVBH0190
Arm
Weight
5.1t 4100x1300x1200 PC1250:30.0t (33.1USt)
(5.6USt) (13'5")x(4'3")x(3'11") FVBH0191 15.0t x2(16.5 x2USt) FVBH0195
Bucket Boom cylinder
2.6t (2.87USt)
1.3t x2 (1.43USt x2) (4) Other 27.7t (30.5 U.S. ton)
9.9t (10.9USt)
3010x2710x2900 3520(11'7")
(9'11")x(8'11")x(9'6") FVBH0192 2850(9'4")
1260(4'2")
Arm cylinder
1.24t (1.43USt)
0.62t x2 (0.67USt x2)
600(2')
2980(9'9")
Width:3540 (11'7")
Weight:9.3t (10.3USt)
400
Bucket cylinder (1'4")
1.56t (1.72USt) 2850(9'4")
0.78t x2 (0.86USt x2)
3300(10'10")
FVBH0193
845 620
(2'9") (2')
(2) Upper structure 23.9t (26.3 U.S. ton) 3155(10'4")
1810
6420(21'1") (5'11")
1760(5'9")
100(3.9")
2510(8'3")
880(2'11")
3470(11'5")
1830
(6')
Width:3490 (11'9")
Weight:23.9t (26.3USt) FVBH0178 18.0t(19.8USt) FVBH0180
2E-14
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1250-8
Posture for Transportation 4 units for transportation (PC1250-8 STD spec.)
(lenght X height X width) (1/2)
(1) Work equipment assembly 27.5t (30.3 U.S. ton) (3) Undercarriage 30.0t (33.1 U.S. ton)
Boom
6425(21'2") 1222(4')
7.1t 5650x1500x2000
(7.8USt) (18'6")x(4'11")x(6'7") FVBH0190
1585(5'2")
Arm
5.1t 4100x1300x1200
(5.6USt) (13'5")x(4'3")x(3'11") FVBH0191
FVBH0195
Bucket Boom cylinder
2.6t (2.87USt)
1.3t x2 (1.43USt x2) (4) Other 18.4t (20.3 U.S. ton)
9.9t (10.9USt)
3010x2710x2900 3520(11'7")
(9'11")x(8'11")x(9'6") FVBH0192
Arm cylinder
1.24t (1.43USt) 885 (2'11")
0.62t x2 (0.67USt x2)
2980(9'9") 3470 (11'5")
1960
(6'5")
Bucket cylinder 1915 (6'3")
1.56t (1.72USt)
0.78t x2 (0.86USt x2) 1830 (6')
100 (3.9")
3300(10'10")
FVBH0193
2850 (9'4")
(2) Upper structure 36.4t (40.1 U.S. ton)
600 (2')
6420 (21'1")
400 (1'4")
845 (2'9")
620 (2')
3130 (10'3")
3155 (10'4")
FVBH0180
Width : 3490 (11'5")
2E-15
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC1800-6
Dimension Length Width Height Weight
Unit name mm (ft.in) mm (ft.in) mm (ft.in) kg (lb)
1 Boom
6400 1740 2000 11800
(21'0") (5'9") (6'7") (26,010)
FVBH0205
2 Arm
4900 1450 1700 9500
(16'1") (4'9") (5'7") (20,940)
FVBH0206
3 Bucket
3350 3220 3250 14400
(11'0") (10'7") (10'8") (31,750)
4 Cylinders 2330 × 2
Boom cylinders 4180 — — (5,140 × 2)
(13'9")
6 Center frame
3330 3770 2100 18000
(10'11") (12'4") (6'11") (39,680)
7 Undercarriage
7440 1930 1890 25500
(24'5") (6'4") (6'2") (56,220)
8 Undercarriage
7440 1930 1890 25500
(24'5") (6'4") (6'2") (56,220)
9 Operator cab
2100 1600 2080 850
(6'11") (5'3") (6'10") (1,874)
10 Counterweight
4910 710 2265 21300
(16'1") (2'4") (7'5") (46,960)
11 Other
7000
— — —
(15,430)
2E-16
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC3000-6
Dimension Pieces Length Width Height Weight
Unit name No. mm (ft.in) mm (ft.in) mm (ft.in) ton (U.S. ton)
7930 1750 2210 34
Crawler Side Frame with Shoes 800 m (31.5”) 2
(26'0") (5'9") (7'3") (37.5)
7930 1850 2210 34
Crawler Side Frame with Shoes 1000 m (39.4”) 1
(26'0") (6'1") (7'3") (37.5)
3520 3940 2180 19.5
Carbody Centre 1
(11'7") (12'11") (7'2") (21.5)
7945 5400 3700 64
Superstructure Platform 1
(26'1") (17'9") (12'2") (70.5)
5050 800 2860 30.5
Counterweight 1 (16'7") (2'7") (9'5") (33.6)
3500 2200 3740 5.4
Fuel Tank 1 (11'6") (7'3") (12'3") (5.95)
2140 1950 2650 3.1
Cab Base 1
(7'0") (6'5") (8'8") (3.4)
3500 2400 3000 3.1
Case with Cab 1 (11'6") (7'10") (9'10") (3.4)
6450 2100 2180 26.5
Face Shovel Boom with 4 Cylinder 1
(21'2") (6'11") (7'2") (29.2)
Face Shovel Stick Without Cylinder 1 4740 1950 1700 10.5
(15'7") (6'5") (5'7") (11.6)
3870 3500 3600 24.4
Face Shovel Compl. 15 m3 (19.6 cu.yd) 1 (12'8") (11'6") (11'10") (26.9)
5800 2400 1800 3.1
Case No. 1, with Accessories Face Shovel 1 (19'0") (7'10") (5'11") (3.42)
4700 1100 1200 7
Case No. 2, with Accessories Face Shovel 1 (15'5") (3'7") (3'11") (7.7)
2E-17
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC4000-6
Dimension Pieces Length Width Height Weight
Unit name No. mm (ft.in) mm (ft.in) mm (ft.in) ton (U.S. ton)
8450 2700 2420 53.5
Crawler Side Frame with Shoes 1200 m (47.3”) 2
(27'9") (8'10") (7'11") (59.0)
8450 2850 2420 56
Crawler Side Frame with Shoes 1500 m (59”) 2
(27'9") (9'4") (7'11") (61.7)
4420 4130 2350 29
Carbody Centre 1
(14'6") (13'7") (7'9") (32)
8420 4440 3900 57.5
Superstructure Platform 1
(27'8") (14'7") (12'10") (63.4)
6150 3420 700 33.8
Counterweight 1 (20'2") (11'3") (2'4") (34.6)
6500 3000 3300 30.1
Machinery House with 1 Engines (21'4") (9'10") (10'10") (33.2)
2400 2100 3230 3.6
Fuel Tank 1
(7'10") (6'11") (10'7") (4.0)
2400 1200 3300 3.2
Hydraulic Tank 1 (7'10") (3'11") (10'10") (3.5)
4400 2250 2700 3.4
Case with Oil Cooler 1
(14'5") (7'5") (8'10") (3.7)
Cab Base 1 2280 2100 3000 3.4
(7'6") (6'11") (9'10") (3.7)
4000 3500 3000 5
Case with Cab 1
(13'1") (11'6") (9'10") (6.5)
7700 2500 3200 34.6
Face Shovel Boom with 4 Cylinder 1
(25'3") (8'2") (10'6") (38.1)
Face Shovel Stick Without Cylinder 1 5300 2100 2000 14.4
(17'5") (6'11") (6'7") (15.9)
Face Shovel Clam 22 m3 (28.8 cu.yd) 1 4100 3500 3400 15.4
(13'5") (11'6") (11'2") (17.0)
Face Shovel Backwall 22 m3 (28.8 cu.yd) 1 4000 4000 1720 15.4
(13'1") (13'1") (5'8") (17.0)
Case No. 1, with Accessories Face Shovel 1 5800 2400 1800 4
(19'0") (7'10") (5'11") (4.4)
4300 1100 1100 6
Case No. 2, with Accessories Face Shovel 1 (14'1") (3'7") (3'7") (6.6)
2E-18
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC5000-6
Dimensions Length mm Width mm Height mm Weight ton
Unit Name (ft.in) (ft.in) (ft.in) (U.S.ton)
2E-19
Component Dimensions HYDRAULIC
and Weights LOADING SHOVELS
PC8000-6
Dimensions Length mm Width mm Height mm Weight ton
Unit Name (ft.in) (ft.in) (ft.in) (U.S.ton)
9300 1790 2400 46
Left Crawler Side Frame without Tracks
(30'6") (5'10") (7'10") (50.7)
9300 1790 2400 46
Right Crawler Side Frame without Tracks
(30'6") (5'10") (7'10") (50.9)
1500 5980 1500 94.4
8 x 12 Piece 1500 mm Track Shoe Group (each group 11.8 t)
(4'11") (19'7") (4'11") (104)
5270 5030 3150 47.5
Carbody Centre
(17'3") (16'6") (10'4") (52.3)
11300 4750 4000 86.3
Superstructure Platform
(37'1") (15'7") (13'1") (95.1)
7300 3800 1000 54
Counterweight
(23'11") (12'6") (3'3") (59.5)
8330 5300 4100 59
Machinery House with 2 Engines
(27'4") (17'5") (13'5") (65)
3500 2200 3740 5.4
Fuel Tank
(11'6") (7'3") (12'3") (6.0)
2700 1910 3680 7
Hydraulic Oil Tank
(8'10") (6'3") (12'1") (7.7)
2620 2030 3700 5
Cab Base
(8'7") (6'8") (12'2") (5.5)
5400 2690 2400 8
Case No.1, with Oil Cooler System
(17'9") (8'10") (7'10") (8.8)
4970 4660 1300 16.2
Case No.2, with Slew Ring
(16'4") (15'3") (4'3") (17.8)
3400 2940 3750 6
Case No.3, with Accessories
(11'1") (9'8") (12'4") (6.6)
4300 3500 3050 9.8
Case No.4, with Accessories
(14'1") (11'6") (10'0") (10.8)
6000 2500 2500 6.9
Container Backhoe Accessories No 1
(19'8") (11'6") (8'2") (6.5)
6000 2500 2500 20.5
Container Backhoe Accessories No 2
(19'8") (8'2") (8'2") (17.4)
12000 2500 2500 28.8
Container Backhoe Accessories No 3
(19'8") (8'2") (8'2") (27)
6000 2500 2500 21.5
Container Backhoe Accessories No 4
(19'8") (8'2") (8'2") (26.6)
9100 2900 3800 48.8
Face Shovel Boom without Cylinder
(29'10") (9'6") (12'6") (53.8)
6700 2900 2800 28.5
Face Shovel Stick without Cylinder
(22') (9'6") (9'2") (31.4)
5740 4000 3850 31.1
Face Shovel Clam 42 cum
(18'10") (13'1") (12'8") (34.3)
5700 4800 1900 32.6
Face Shovel Back Wall 42 cum
(18'8") (15'9") (6'3") (35.9)
2E-20
Ground Pressure HYDRAULIC
LOADING SHOVELS
NOTE: The shoe for the long-track excavator (L and LC), wide shoe (excluding the narrowest shoe for a
model) and swamp shoe are provided with low ground pressure. These shoes should be used on
soft and swampy terrain where the standard excavator with standard shoe is not usable due to
sinking of the tracks. If such shoes are used in swampy fields with stones, stumps and roots,
bending of the shoe plates, cracks in the links, breakage of pins, loosening of shoe bolts and other
damage may result. Therefore, the job site must be studied carefully, to provide the customer with
correct instructions and advice.
2E-21
Loading Shovel HYDRAULIC
Buckets LOADING SHOVELS
The bucket weight is heavier than the tilt-dump bucket. However, its characteristics of vertical dumping
provide the following features
• Accurate loading is possible, because it is easy to position the bucket on the dumping point.
• Load spillage is less.
• Larger dumping clearance permits easier loading on the hauler.
• As it is possible to more closely position the bucket over the hauler’s body, loading shock to the hauler can
be minimized, extending the service life of the hauler.
• As a result of the above advantages, the cycle time is shortened.
2E-22
Model Selection HYDRAULIC
LOADING SHOVELS
HYDRAULIC LOADING SHOVEL AND DUMP TRUCK COMBINATION
2E-23
Production HYDRAULIC
LOADING SHOVELS
Estimated Hourly Production
ESTIMATED
BUCKET SIZE** (m3) OR (cu.yd)
CYCLE TIME
SEC. MIN. 2.5 2.8 3.1 3.4 3.7 4.0 4.3 4.6 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5
15.0 0.25 600 672 744 816 888 960 1032 1104 1200 1320 1440 1560 1680 1800 1920 2040
18.0 0.30 500 560 620 680 740 800 860 920 1000 1100 1200 1300 1400 1500 1600 1700
21.0 0.35 429 480 531 583 634 686 737 789 857 943 1029 1114 1200 1286 1371 1457
24.0 0.40 375 420 465 510 555 600 645 690 750 825 900 975 1050 1125 1200 1275
27.0 0.45 333 373 413 453 493 533 573 613 667 733 800 867 933 1000 1067 1133
30.0 0.50 300 336 372 408 444 480 516 552 600 660 720 780 840 900 960 1020
33.0 0.55 273 305 338 371 404 436 469 502 545 600 655 709 764 818 873 927
36.0 0.60 250 280 310 340 370 400 430 460 500 550 600 650 700 750 800 850
ESTIMATED
BUCKET SIZE** (m3) OR (cu.yd)
CYCLE TIME
SEC. MIN. 9.0 9.5 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 20 22 25 28 35 38
15.0 0.25 2160 2280 2400 2640 2880 3120 3360 3600 3840 4080
18.0 0.30 1800 1900 2000 2200 2400 2600 2800 3000 3200 3400
21.0 0.35 1543 1629 1714 1886 2057 2229 2400 2571 2743 2914 3428 3771 4285 4800 6000 6514
24.0 0.40 1350 1425 1500 1650 1800 1950 2100 2250 2400 2550 3000 3300 3750 4200 5250 5700
27.0 0.45 1200 1267 1333 1467 1600 1733 1867 2000 2133 2267 2666 2933 3333 3733 4666 5066
30.0 0.50 1080 1140 1200 1320 1440 1560 1680 1800 1920 2040 2400 2640 3000 3360 4200 4560
33.0 0.55 982 1036 1091 1200 1309 1418 1527 1636 1745 1855 2181 2400 2727 3054 3818 4145
36.0 0.60 900 950 1000 1100 1200 1300 1400 1500 1600 1700 2000 2200 2500 2800 3500 3800
Actual production = (Estimated Hourly production) × (Bucket fill factor) × (Job efficiency)
Bucket Fill Factor (K) (PC400~PC1800) Job Efficiency(E)
Loading conditions K
Easy loading 1.0
Average loading 0.95
Severe loading 0.90
*4 : KMG Mining Shovels (Loading shovel)
2E-24
SECTION 2F
WHEEL-TYPE
EXCAVATORS
CONTENTS
Features .....................................................................2F-2
Specifications ............................................................2F-3
Dimensions ................................................................2F-7
Working ranges, digging force ..............................2F-10
Bucket and arm combinations ...............................2F-13
Lifting capacity ........................................................2F-16
2F-1
Features WHEEL-TYPE
EXCAVATORS
High mobility
• A high-power KOMATSU engine gives it a higher travel speed for quick relocation.
• Four-wheel drive and double tires (PW75~PW220) both front and rear make it easy to travel over rough or
soft terrain.
High working performance
• Large working range and strong digging force.
• The PC system makes full use of engine power. (PW75~PW220)
• A two-pump merge system increases work equipment speed and reduces cycle time.
• Smooth, responsive swing starts and stops.
• High lifting capacity and good stability.
High operating versatility
• Extra-small swing radius boosts operating versatility.
• Excellent stability due to oscillation lock cylinders and double tires.
Enhanced operator comfort
• Hydrostatic drive system assures smooth, easy travel speed changes.
• Newly designed cab offers greater comfort.
Excellent safety and easy maintenance
• Four wheel disc brake with positive braking
• One of the features now on the new wheeled excavator is a walkway across the excavator superstructure,
giving easy access to the engine compartment.
(PW180-7, PW200-7, PW220-7)
In harmony with the environment
• Low emission engine
The powerful turbocharged and air-to-air aftercooled Komatsu SAA6D102E-2 provides 118 kW/158 HP.
This engine meets Stage II emissions standards with increased power and machine productivity.
• Economy mode reduces fuel consumption
• Low operating noise
• Designed for easy end of life recycling
(PW180-7, PW200-7, PW220-7)
Undercarriage
• Designed for high ground clearance
• High oscillation angle
• Virtually zero axle rocking with outboard wet disc system
• Powerful drawbar pull
• Automatic 3-speed travel
• Class leading 35 km/h maximum travel speed
(PW160-7, PW180-7, PW200-7, PW220-7)
SpaceCabTM
The new PW180/200/220-7's cab space have been increased by 14%, offering an exceptionally-roomy
operating environment.
• High-pressurised cabin with optional air conditioner
• Low-noise design
• Low-vibration design with cabin damper mounting
• Cab moved forward for better visibility
• Ergonomic control levers
• Seat specially designed for wheeled machines, with exceptional extra comfort.
(PW180-7, PW200-7, PW220-7)
2F-2
Specifications WHEEL-TYPE
EXCAVATORS
2F-3
Specifications WHEEL-TYPE
EXCAVATORS
2F-4
Specifications WHEEL-TYPE
EXCAVATORS
2F-5
Specifications WHEEL-TYPE
EXCAVATORS
2F-6
Dimensions WHEEL-TYPE
EXCAVATORS
E L
D
J
F
K
C
G G.L
H B
I A FVBH0005
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
2060 930 1040 1475 2000 2690 340 1684 2155 5720 1.7
PW75R-2** (6'9'') (3'1'') (3'5'') (4'10'') (6'7'') (8'10'') (1'1'') (5'6'') (7'1'') (18'9'') (5'7'')
PW95R-2** 2200 1000 1100 1510 2120 3020 405 1815 2315 5895 1.6
(7'3'') (3'3'') (3'7'') (4'11'') (6'11'') (9'11'') (1'4'') (5'11'') (7'7'') (19'4'') (5'3'')
2400 1100 1175 1577 2120 3090 350 1945 2500 6540 1.85
PW110R-1**
(7'10'') (3'7'') (3'10'') (5'2'') (6'11'') (10'2'') (1'2'') (6'5'') (8'2'') (21'5'') (6'1'')
3105 7576 2.1
PW130-7* 2600 1300 1245 2112 2436 3060 385 1914 3740 (10'2") 2166 (24'10") 4.6 (6'11")
(8'6") (4'3") (4'1") (6'11") (7'11") (10') (1'3") (6'3") (12'3") 3391 (7'1") 7476 (15'1") 2.5
(11'2") (24'6") (8'2")
6007 2.1
2600 1300 1245 2112 2436 3060 385 1914 3740 3937 2166 (19'9") 4.8 (6'11")
PW130-7** (8'6") (4'3") (4'1") (6'11") (7'11") (10') (1'3") (6'3") (12'3") (12'11") (7'1") 5869 (15'9") 2.5
(19'3") (8'2")
3055 7590 2.1
2600 1000 1210 2112 2435 3043 340 1884 2500 (10') 2330 (24'11'') 4.6 (6'11'')
PW130ES-6*
(8'6'') (3'3'') (4') (6'11'') (8') (10') (1'1'') (6'2'') (8'2'') 3455 (7'8'') 7445 (15'1'') 2.5
(11'4'') (24'5'') (8'2'')
3945 5731 2.1
2600 1000 1210 2112 2435 3043 340 1884 2500 (12'11'') 2330 (18'10'') 4.8 (6'11'')
PW130ES-6** (8'6'') (3'3'') (4') (6'11'') (8') (10') (1'1'') (6'2'') (8'2'') (7'8'') (15'9'')
3940 5715 2.5
(12'11'') (18'9'') (8'2'')
3163 7772 2.1
(19'7'') (25'6'') (6'11'')
PW150ES-6* 2600 1000 1275 2292 2435 3069 340 1884 2500 3294 2410 7743 4.6 2.5
(8'6'') (3'3'') (4'2'') (7'6'') (8') (10'1'') (1'1'') (6'2'') (8'2'') (10'10'') (7'11'') (25'5'') (15'1'') (8'2'')
3867 7451 3.0
(12'8'') (24'5'') (9'10'')
3965 5973 2.1
(13') (19'7'') (6'11'')
2600 1000 1275 2292 2435 3069 340 1884 2500 3979 2410 5969 4.8 2.5
PW150ES-6**
(8'6'') (3'3'') (4'2'') (7'6'') (8') (10'1'') (1'1'') (6'2'') (8'2'') (13'1'') (7'11'') (19'7'') (15'9'') (8'2'')
3954 5979 3.0
(13') (19'7'') (9'10'')
3500 8290 2.1
(11'6'') (27'2'') (6'11'')
2600 1300 1265 2180 2490 3200 350 1915 2500 3500 2290 8290 5.3 2.5
PW160-7*
(8'6'') (4'3'') (4'2'') (7'2'') (8'2'') (10'6'') (1'2'') (6'3'') (8'2'') (11'6'') (7'6'') (27'2'') (17'5'') (8'2'')
3975 8045 3.0
(13'1'') (26'5'') (9'10'')
3975 2.1
(13'1'') (6'11'')
2600 1300 1265 2180 2490 3200 350 1915 2500 3975 2290 5.223 2.5
PW160-7**
(8'6'') (4'3'') (4'2'') (7'2'') (8'2'') (10'6'') (1'2'') (6'3'') (8'2'') (13'1'') (7'6'') (17'2'') (8'2'')
3975 3.0
(13'1'') (9'10'')
3965 5223 1.8
(13'1'') (28'4'') (5'11'')
2600 1000 1275 2417 2462 3134 340 1884 2500 3975 2410 8572 5.2 2.25
PW170ES-6*
(8'6'') (3'3'') (4'2'') (7'11'') (8'1'') (10'3'') (1'1'') (6'2'') (8'2'') (13'1'') (7'11'') (28'1'') (17'1'') (7'5'')
3975 8563 2.6
(13'1'') (28'1'') (8'6'')
* One piece boom
** Two piece boom
2F-7
Dimensions WHEEL-TYPE
EXCAVATORS
E L
D
J
F
K
C
G G.L
H B
I A FVBH0005
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
3995 5827 1.8
(13'1'') (19'1'') (5'11'')
PW170ES-6** 2600 1000 1275 2417 2462 3134 340 1884 2500 3995 2410 6550 5.2 2.25
(8'6'') (3'3'') (4'2'') (7'11'') (8'1'') (10'3'') (1'1'') (6'2'') (8'2'') (13'1'') (711'') (21'6'') (17'1'') (7'5'')
3960 6960 2.6
(13'10'') (22') (8'6'')
2.25
***
(7'5")
2550
2600 1300 1303 2500 2490 3209 332 1914 3720 8900 5.35 2.6
PW180-7* (8'6") (4'3") (4'3") (8'2") (8'2") (10'6") (1'1") (6'3") (8'4") (12'2") (29'2") (17'7") (8'6")
2750
2.9
(9')
(9'6")
*** 3972 6794 2.25
2550 (13') (22'3") (7'5")
PW180-7** 2600 1300 1303 2500 2490 3209 332 1914 (8'4") 3972 6714 5.28 2.6
(8'6") (4'3") (4'3") (8'2") (8'2") (10'6") (1'1") (6'3") (13') (22') (17'4") (8'6")
2750
3960 6850 2.9
(9')
(13') (2276") (9'6")
3906 9479 1.8
(12'10") (31'1") (5'11")
3895 9435 2.4
2750 1450 1327 2700 2541 3234 330 1914 2541 (12'9") 2342 (30'11") 5.7 (7'10")
PW200-7*
(9'0") (4'9") (4'4") (8'10") (8'4") (10'7") (1'1") (6'3") (8'4") 3912 (7'8") 9427 (18'8") 2.9
(12'10") (30'11") (9'6")
3985 9467 3.5
(13'1") (31'1") (11'6")
3980 7070 1.8
(13'1") (23'2") (5'11")
3980 7078 2.4
2750 1450 1327 2700 2541 3234 330 1914 2541 (13'1") 2342 (23'3") 5.4 (7'10")
PW200-7** (9'0") (4'9") (4'4") (8'10") (8'4") (10'7") (1'1") (6'3") (8'4") (7'8")
3997 7000 (17'9") 2.9
(13'1") (23'0") (9'6")
4505 7218 3.5
(14'9") (23'8") (11'6")
9480 2.41
2800 1420 1310 2680 2610 3130 335 1860 2490 3740 2520 (31'1'') 5.7 (7'11'')
PW210-1
(9'2'') (4'8'') (4'4'') (8'10'') (8'7'') (10'3'') (1'1'') (6'1'') (8'2'') (12'3'') (8'3'') 9460 (18'8'') 2.925
(31') (9'7'')
3920 9479 1.8
(12'10") (31'1") (5'11")
3909 9435 2.4
2750 1450 1341 2700 2785 3248 345 2124 2785 (12'10") 2356 (30'11") 5.7 (7'10")
PW220-7*
(9'0") (4'9") (4'5") (8'10") (9'2") (10'8") (1'2") (7'0") (9'2") 3926 (7'9") 9427 (18'8") 2.9
(12'11") (30'11") (9'6")
3999 9467 3.5
(13'1") (31'1") (11'6")
* One piece boom
** Two piece boom
2F-8
Dimensions WHEEL-TYPE
EXCAVATORS
E L
D
J
F
K
C
G G.L
H B
I A FVBH0005
A B C D E F G H I J K L Boom Arm
mm mm mm mm mm mm mm mm mm mm mm mm length length
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) m (ft.in) m (ft.in)
3995 7070 1.8
(13'1") (23'2") (5'11")
3995 7078 2.4
2750 1450 1341 2700 2785 3248 345 2124 2785 (13'1") 2356 (23'3") 5.4 (7'10")
PW220-7**
(9'0") (4'9") (4'5") (8'10") (9'2") (10'8") (1'2") (7'0") (9'2") 4011 (7'9") 7000 (17'9") 2.9
(13'2") (23'0") (9'6")
4519 7218 3.5
(14'10") (23'8") (11'6")
* One piece boom
** Two piece boom
*** Figures for 2.75 m undercarriage
2F-9
Working Ranges WHEEL-TYPE
Digging Force EXCAVATORS
A
B
FVBH0006
2F-10
Working Ranges WHEEL-TYPE
Digging Force EXCAVATORS
A
B
FVBH0006
2F-11
Working Ranges WHEEL-TYPE
Digging Force EXCAVATORS
A
B
FVBH0006
2F-12
Bucket and Arm WHEEL-TYPE
Combinations EXCAVATORS
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Material weight up to 1.8 t/m3 (3000 lb/cu.yd) Material weight up to 1.5 t/m3 (2500 lb/cu.yd)
Material weight up to 1.2 t/m3 (2000 lb/cu.yd) Not usable.
Bucket capacity (heaped) Width Weight
SAE,PCSA CECE Without Side With Side kg (lb) Arm length
3
m (cu.yd) 3
m (cu.yd) cutters cutters (With side m (ft.in)
mm (in) mm (in) cutters)
PW75R-2** 1.7 (5'7") 2.1 (6'11")
0.086 (0.11) — 300 (11.8") — *128 (282) —
0.128 (0.17) — 400 (15.7") — *160 (353) —
0.171 (0.22) — 500 (19.7") — *184 (406) —
0.2 (0.26) — 600 (23.6") — *174 (384) —
0.232 (0.30) — 700 (27.6") — *189 (417) —
0.265 (0.35) — 800 (31.5") — *196 (432) —
PW95R-2** 1.6 (5'3") 1.85 (6'1")
0.086 (0.11) — 300 (11.8") — *128 (282)
0.128 (0.17) — 400 (15.7") — *160 (353)
0.171 (0.22) — 500 (19.7") — *184 (406)
0.213 (0.28) — 600 (23.6") — *200 (441)
0.255 (0.33) — 700 (27.6") — *218 (481)
0.298 (0.39) — 800 (31.5") — *236 (520)
0.34 (0.44) — 900 (35.4) — *256 (564)
PW110R-1**
0.093 (0.12) — 300 (11.8") — 168 (370)
0.139 (0.18) — 400 (15.7") — 194 (428)
0.181 (0.24) — 500 (19.7") — 218 (481)
0.225 (0.29) — 600 (23.6") — 234 (516)
0.27 (0.35) — 700 (27.6") — 252 (556)
0.314 (0.41) — 800 (31.5") — 270 (595)
0.36 (0.47) — 900 (35.4") — 294 (648)
0.4 (0.52) — 1000 (39.4") — 320 (705)
PW130-7 2.1 (6'11") 2.5 (8'2") Rotating arm
0.18 (0.24) — 400 (15.7") — *305 (672)
0.25 (0.38) — 500 (19.7") — *320 (705)
0.32 (0.42) — 600 (23.6") — *350 (772)
0.40 (0.52) — 700 (27.6") — *390 (860)
0.48 (0.63) — 800 (31.5") — *440 (970)
0.56 (0.73) — 900 (35.4") — *475 (1047)
0.64 (0.84) — 1000 (39.4") — *505 (1113)
0.72 (0.94) — 1100 (43.3") — *560 (1235)
0.80 (1.05) — 1200 (47.2") — *620 (1367)
0.94 (1.23) — 1200 (47.2") — *625 (1378) —
PW130ES-6 2.1 (6'11") 2.5 (8'2") Rotating arm
0.20 (0.26) 0.19 (0.25) 400 (15.7") — *270 (595)
0.27 (0 35) 0.25 (0.33) 450 (17.7") — *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") — *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") — *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") — *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") — *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") — *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") — *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") — *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") — *605 (1334)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") — *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") — *675 (1488)
* Without side cutters
** Two piece boom
2F-13
Bucket and Arm WHEEL-TYPE
Combinations EXCAVATORS
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Material weight up to 1.8 t/m3 (3000 lb/cu.yd) Material weight up to 1.5 t/m3 (2500 lb/cu.yd)
Material weight up to 1.2 t/m3 (2000 lb/cu.yd) Not usable.
Bucket capacity (heaped) Width Weight
SAE,PCSA CECE Without Side With Side kg (lb) Arm length
m3 (cu.yd) m3 (cu.yd) cutters cutters (With side m (ft.in)
mm (in) mm (in) cutters)
Rotating
PW150ES-6 2.1 (6'11") 2.5 (8'2") 3.0 (9'10")
arm
0.20 (0.26) 0.19 (0.25) 400 (15.7") — *270 (595)
0.27 (0 35) 0.25 (0.33) 450 (17.7") — *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") — *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") — *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") — *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") — *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") — *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") — *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") — *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") — *605 (1334)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") — *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") — *675 (1488)
PW160-7 2.1 (6'11") 2.5 (8'2") 3.0 (9'10")
0.20 (0.26) 0.19 (0.25) 400 (15.7") — *270 (595)
0.27 (0.35) 0.25 (0.33) 450 (17.7") — *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") — *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") — *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") — *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") — *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") — *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") — *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") — *575 (1268)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") — *605 (1334)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") — *630 (1389)
PW170ES-6 1.8 (5'11") 2.2 (7'3") 2.6 (8'6")
0.27 (0.35) 0.25 (0.33) 450 (17.7") — *300 (661)
0.41 (0.55) 0.37 (0.48) 600 (23.6") — *420 (926)
0.48 (0.63) 0.44 (0.58) 700 (27.6") — *445 (981)
0.55 (0.72) 0.50 (0.65) 800 (31.5") — *460 (1014)
0.62 (0.81) 0.57 (0.75) 900 (35.4") — *495 (1091)
0.69 (0.90) 0.63 (0.82) 1000 (39.4") — *530 (1168)
0.76 (0.99) 0.69 (0.90) 1100 (43.3") — *550 (1213)
0.83 (1.09) 0.76 (0.99) 1200 (47.2") — *575 (1168)
0.90 (1.18) 0.82 (1.07) 1300 (51.2") — *605 (1134)
0.97 (1.27) 0.89 (1.16) 1400 (55.1") — *630 (1389)
1.14 (1.49) 1.04 (1.36) 1400 (55.1") — *675 (1488)
PW180-7 2.3 2.6 (8'6") 2.9 (9'6")
0.38 (0.50) — 600 (23.6") — *385 (849)
0.47 (0.61) — 700 (27.6") — *435 (959)
0.56 (0.73) — 800 (31.5") — *465 (1025)
0.66 (0.86) — 900 (35.4") — *495 (1091)
0.75 (0.98) — 1000 (39.4") — *530 (1168)
0.94 (1.23) — 1200 (47.2") — *615 (1356)
1.13 (1.48) — 1400 (55.1") — *695 (1532) —
* Without side cutters
2F-14
Bucket and Arm WHEEL-TYPE
Combinations EXCAVATORS
These charts are based on over-side stability with fully loaded bucket at maximum reach.
Material weight up to 1.8 t/m3 (3000 lb/cu.yd) Material weight up to 1.5 t/m3 (2500 lb/cu.yd)
Material weight up to 1.2 t/m3 (2000 lb/cu.yd) Not usable.
Bucket capacity (heaped) Width Weight
SAE,PCSA CECE Without Side With Side kg (lb) Arm length
m3 (cu.yd) m3 (cu.yd) cutters cutters (With side m (ft.in)
mm (in) mm (in) cutters)
PW200-7 1.8 (5'11") 2.4 (7'11") 2.9 (9'6") 3.5 (11'6")
0.48 (0.63) — 600 (23.6") *480 (1058)
0.55 (0.72) — 700 (27.6") *530 (1168)
0.63 (0.82) — 800 (31.5") *580 (1279)
0.71 (0.93) — 900 (35.4") *610 (1345
0.78 (1.02) — 1000 (39.4") *650 (1433)
0.86 (1.12) — 1100 (43.3") *700 (1543)
0.96 (1.26) — 1200 (47.2") *760 (1675)
1.03 (1.35) — 1300 (51.2") *810 (1786) —
1.11 (1.45) — 1400 (55.1") *870 (1918) —
1.19 (1.56) — 1500 (59.1") *930 (2050) — —
1.49 (1.95) — 1600 (63.0") *1100 (2425) — — — —
1.58 (2.07) — 1700 (66.9") *1500 (2535) — — — —
1.68 (2.20) — 1800 (70.9") *1200 (2646) — — — —
PW210-1 1.8 (5'11") 2.41 (7'11") 2.925 (9'7")
0.36 (0.47) 0.33 (0.43) 560 (22") 665 (26.2") 410 (904)
0.50 (0.65) 0.45 (0.59) 750 (29.5") 855 (33.7") 440 (970)
0.80 (1.05) 0.70 (0.92) 1045 (44.1") 1150 (45.3") 576 (1270)
0.93 (1.22) 0.80 (1.05) 1200 (47.2") 1305 (51.4") 590 (1301)
1.05 (1.37) 0.90 (1.12) 1330 (52.4") 1435 (56.5") 656 (1433)
1.17 (1.53) 1.00 (1.31) 1450 (57.1") — *660 (1455)
1.40 (1.83) 1.20 (1.57) 1680 (66.1") — *710 (1565)
PW220-7 1.8 (5'11") 2.4 (7'11") 2.9 (9'6") 3.5 (11'6")
0.48 (0.63) — 600 (23.6") *480 (1058)
0.55 (0.72) — 700 (27.6") *530 (1168)
0.63 (0.82) — 800 (31.5") *580 (1279)
0.71 (0.93) — 900 (35.4") *610 (1345
0.78 (1.02) — 1000 (39.4") *650 (1433)
0.86 (1.12) — 1100 (43.3") *700 (1543)
0.96 (1.26) — 1200 (47.2") *760 (1675)
1.03 (1.35) — 1300 (51.2") *810 (1786)
1.11 (1.45) — 1400 (55.1") *870 (1918)
1.19 (1.56) — 1500 (59.1") *930 (2050) —
1.49 (1.95) — 1600 (63.0") *1100 (2425) — — —
1.58 (2.07) — 1700 (66.9") *1500 (2535) — — —
1.68 (2.20) — 1800 (70.9") *1200 (2646) — — — —
* Without side cutters
2F-15
Lifting Capacity WHEEL-TYPE
EXCAVATORS
L
A : Reach from swing center
B : Bucket hook height
C : Lifting capacity
Cf : Rating over front
B Cs : Rating over side
MAX : Rating at maximum reach
L : Arm length
C
kg(lb) FVBH0027
Conditions:
Bucket (SAE) : 0.232 m3 (0.30 cu.yd), Tires : 7.50-20 unit : kg (lb)
A MAX 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs
Arm length 1700 mm (5'7") With blade and outrigger above ground
4.5 m 1050* 700
(15') (2300) (1550)
3.0 m 1150* 700 1200* 1000
(10') (2550) (1550) (2650) (2200)
1.5 m 1200* 650 1250* 950 2800* 2000
(5') (2650) (1450) (2750) (2100) (6150) (4400)
0m 1350* 600 1400* 900 2800* 2050
(0') (2950) (1300) (3100) (2000) (6150) (4500)
–1.5 m 1450* 700 1500* 850 2750* 1950
(–5') (3200) (1550) (3300) (1850) (6050) (4300)
Arm length 2100 mm (6'11") With blade and outrigger above ground
4.5 m 1000* 650
(15') (2200) (1450)
3.0 m 1100* 650 1150* 950
(10') (2400) (1450) (2550) (2100)
1.5 m 1150* 600 1200* 900 2800* 1950
(5') (2550) (1300) (2650) (2000) (6150) (4300)
0m 1300* 550 1350* 850 2750* 2000
(0') (2850) (1200) (2950) (1850) (6050) (4400)
–1.5 m 1400* 650 1450* 800 2700* 1900
(–5') (3100) (1450) (3200) (1750) (5950) (4200)
Arm length 1700 mm (5'7") With blade and outrigger on ground
4.5 m 1150* 750
(15') (2550) (1650)
3.0 m 1250* 750 1300* 1100
(10') (2750) (1650) (2850) (2400)
1.5 m 1300* 700 1350* 1050 2900* 2900*
(5') (2850) (1550) (2950) (2300) (6400) (6400)
0m 1450* 650 1500* 1000 2850* 2850*
(0') (3200) (1450) (3300) (2200) (6250) (6250)
–1.5 m 1550* 750 1600* 950 2800* 2800*
(–5') (3400) (1650) (3500) (2100) (6150) (6150)
Arm length 2100 mm (6'11") With blade and outrigger on ground
4.5 m 1100* 700
(15') (2400) (1550)
3.0 m 1200* 700 1250* 1050
(10') (2650) (1550) (2750) (2300)
1.5 m 1250* 650 1300* 1000 2850* 2850*
(5') (2750) (1450) (2850) (2200) (6250) (6250)
0m 1400* 600 1450* 950 2800* 2800*
(0') (3100) (1300) (3200) (2100) (6150) (6150)
–1.5 m 1500* 700 1550* 900 2750* 2750*
(–5') (3300) (1550) (3400) (2000) (6050) (6050)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard No.J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-16
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW75R-2 (Two piece boom)
Conditions:
Bucket (SAE): 0.232 m3 (0.30 cu.yd), Tires:7.50-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1700 mm (5'7") With blade and outrigger above ground
4.5 m 650 500 1100 1000
(15') (1450) (1100) (2400) (2200)
3.0 m 600 450 750 450 1100 950
(10') (1300) (1000) (1650) (1000) (2400) (2100)
1.5 m 550 400 700 450 1200 900
(5') (1200) (900) (1550) (1000) (2650) (2000)
0m 550 350 700 400 1200 850 2400* 1800
(0') (1200) (800) (1550) (900) (2650) (1850) (5300) (3950)
–1.5 m 650 500 1100 700 2500* 1500
(–5') (1450) (1100) (2400) (1550) (5500) (3300)
Arm length 2100 mm (6'11") With blade and outrigger above ground
4.5 m 600 450 1000 950
(15') (1300) (1000) (2200) (2100)
3.0 m 550 400 700 500 1000 900
(10') (1200) (900) (1550) (1100) (2200) (2000)
1.5 m 500 350 700 450 1100 850
(5') (1100) (750) (1550) (1000) (2400) (1850)
0m 500 300 650 350 1100 800 2300* 1750
(0') (1100) (650) (1450) (750) (2400) (1750) (5050) (3850)
–1.5 m 600 450 1000 650 2400* 1450
(–5') (1300) (1000) (2200) (1450) (5300) (3200)
Arm length 1700 mm (5'7") With blade and outrigger on ground
4.5 m 1100* 600 1200* 1050
(15') (2400) (1300) (2650) (2300)
3.0 m 1000* 550 1050* 600 1200* 1000
(10') (2200) (1200) (2300) (1300) (2650) (2200)
1.5 m 950* 450 1000* 600 1250* 950
(5') (2100) (1000) (2200) (1300) (2750) (2100)
0m 1050* 450 1100* 550 1250* 900 2500* 1900
(0') (2300) (1000) (2400) (1200) (2750) (2000) (5500) (4200)
–1.5 m 1150* 600 1150* 850 2600* 1600
(–5') (2550) (1300) (2550) (1850) (5700) (3500)
Arm length 2100 mm (6'11") With blade and outrigger on ground
4.5 m 1000* 550 1000* 600 1100* 1000
(15') (2200) (1200) (2200) (1300) (2400) (2200)
3.0 m 900* 500 1000* 550 1100* 950
(10') (2000) (1100) (2200) (1200) (2400) (2100)
1.5 m 850* 450 950* 500 1150* 900
(5') (1850) (1000) (2100) (1100) (2550) (2000)
0m 950* 400 1050* 450 1150* 850 2400* 1850
(0') (2100) (900) (2300) (1000) (2550) (1850) (5300) (4050)
–1.5 m 1050* 550 1100* 800 2500* 1550
(–5') (2300) (1200) (2400) (1750) (5500) (3400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2F-17
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (One piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 1000 900 2100 1900
(15') (2200) (2000) (4600) (4200)
3.0 m 800 700 950 700 1900* 1700
(10') (1750) (1550) (2100) (1550) (4200) (3750)
1.5 m 700 600 850 650 1550 1400 3900* 2600
(5') (1550) (1300) (1850) (1450) (3600) (3100) (8600) (5700)
0m 750 650 1400 1300 3750* 2400
(0') (1650) (1450) (3100) (2850) (8250) (5300)
–1.5 m 850 750 1650 1500 3500* 2400
(–5') (1850) (1650) (3650) (3300) (7700) (5300)
–3.0 m 1100 1000 3200* 2500
(–10') (2400) (2200) (7050) (5500)
Arm length 2000 mm (6'7") With blade and outrigger above ground
4.5 m 950 850 1000 900 2000 1800
(15') (2100) (1850) (2200) (2000) (4400) (3950)
3.0 m 850 650 900 800 1700 1550
(10') (1850) (1450) (2000) (1750) (3750) (3400)
1.5 m 750 550 800 700 1450 1300 3800* 2500
(5') (1650) (1200) (1750) (1550) (3200) (2850) (8350) (5500)
0m 700 600 800 700 1300 1250 3600* 2250
(0') (1550) (1300) (1750) (1550) (2850) (2750) (7900) (4950)
–1.5 m 800 700 1550 1400 3400* 2200
(–5') (1750) (1550) (3400) (3100) (7500) (4850)
–3.0 m 1050 950 1650 1500 3100* 2250
(–10') (2300) (2100) (3650) (3300) (6800) (4950)
Arm length 2300 mm (7'7") With blade and outrigger above ground
4.5 m 900 800 950 850 1900 1750
(15') (2000) (1750) (2100) (1850) (4200) (3850)
3.0 m 700 600 850 750 1650 1500
(10') (1550) (1300) (1850) (1650) (3650) (3300)
1.5 m 600 500 750 650 1350 1200 3750* 2400
(5') (1300) (1100) (1650) (1450) (2950) (2650) (8250) (5300)
0m 650 550 750 600 1250 1100 3500* 2100
(0') (1450) (1200) (1650) (1300) (2750) (2400) (7700) (4600)
–1.5 m 750 650 1450 1300 3300* 2000
(–5') (1650) (1450) (3200) (2850) (7250) (4400)
–3.0 m 1000 900 1550 1400 3000* 2050
(–10') (2200) (2000) (3400) (3100) (6600) (4500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2F-18
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (One piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit:kg(lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger on ground
4.5 m 1100 1000 2400* 2000
(15') (2400) (2200) (5300) (4400)
3.0 m 900 800 1400* 800 2300* 1800
(10') (2000) (1750) (3100) (1750) (5050) (3950)
1.5 m 800 700 1200* 750 2250* 1500 3900* 3900*
(5') (1750) (1550) (2650) (1650) (4950) (3300) (8600) (8600)
0m 850 750 2100* 1400 3750* 3750*
(0') (1850) (1650) (4600) (3100) (8250) (8250)
–1.5 m 950 850 2200* 1600 3500* 3500*
(–5') (2100) (1850) (4850) (3500) (7700) (7700)
–3.0 m 1200 1100 3200* 3200*
(–10') (2650) (2400) (7050) (7050)
Arm length 2000 mm (6'7") With blade and outrigger on ground
4.5 m 1050 950 1500* 1000 2300* 1900
(15') (2300) (2100) (3300) (2200) (5050) (4200)
3.0 m 850 750 1250* 900 2200* 1900
(10') (1850) (1650) (2750) (2000) (4850) (4200)
1.5 m 750 650 1100* 800 2100* 1400 3800* 3800*
(5') (1650) (1450) (2400) (1750) (4600) (3100) (8350) (8350)
0m 800 700 1000* 850 2000* 1350 3600* 3600*
(0') (1750) (1550) (2200) (1850) (4400) (2950) (7900) (7900)
–1.5 m 900 800 2100* 1500 3400* 3400*
(–5') (2000) (1750) (4600) (3300) (7500) (7500)
–3.0 m 1100 1000 2250* 1600 3100* 3100*
(–10') (2400) (2200) (4950) (3500) (6800) (6800)
Arm length 2300 mm (7'7") With blade and outrigger on ground
4.5 m 1000 900 1400* 950 2200* 1850
(15') (2200) (2000) (3100) (2100) (4850) (4050)
3.0 m 800 700 1100* 850 2100* 1600
(10') (1750) (1550) (2400) (1850) (4600) (3500)
1.5 m 700 600 1000* 750 2000* 1300 3750* 3750*
(5') (1550) (1300) (2200) (1650) (4400) (2850) (8250) (8250)
0m 750 650 950* 700 1900* 1200 3500* 3500*
(0') (1650) (1450) (2100) (1550) (4200) (2650) (7700) (7700)
–1.5 m 850 750 2000* 1400 3300* 3300*
(–5') (1850) (1650) (4400) (3100) (7250) (7250)
–3.0 m 1100 1000 2150* 1500 3000* 3000*
(–10') (2400) (2200) (4750) (3300) (6600) (6600)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2F-19
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW110R-1 (Two piece boom)
Conditions:
Bucket (SAE): 0.32 m3 (0.42 cu.yd), Tires: 9.00-20 unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 900 800 900 800 2200 2000
(15') (2000) (1750) (2000) (1750) (4850) (4400)
3.0 m 750 650 800* 700 2000 1800
(10') (1650) (1450) (1750) (1550) (4400) (3950)
1.5 m 550 450 750* 650 1700 1500
(5') (1200) (1000) (1650) (1450) (3750) (3300)
0m 550 450 700 600 1500 1400
(0') (1200) (1000) (1550) (1300) (3300) (3100)
–1.5 m 700 550 850 750 1700 1600 3600* 3600*
(–5') (2550) (1200) (1850) (1650) (3750) (3500) (7900) (7900)
–3.0 m 900 800 1850 1700 3300* 3300*
(–10') (2000) (1750) (4050) (3750) (7250) (7250)
Arm length 2000 mm (6'7") With blade and outrigger above ground
4.5 m 850 750 900 800 2100 1900
(15') (1850) (1650) (2000) (1750) (4600) (4200)
3.0 m 700 600 800 700 1800 1650
(10') (1550) (1300) (1750) (1550) (3950) (3650)
1.5 m 500 400 750 650 1600 1400
(5') (1100) (900) (1650) (1450) (3500) (3100)
0m 550 400 700 600 1400 1350
(0') (1200) (900) (1550) (1300) (3100) (2950)
–1.5 m 550 450 750 700 1700 1500 3500* 3500*
(–5') (1200) (1000) (1650) (1550) (3750) (3300) (7700) (7700)
–3.0 m 850 750 1750 1600 3200* 3200*
(–10') (1850) (1650) (3850) (3500) (7050) (7050)
Arm length 1850 mm (6'1") With blade and outrigger above ground
4.5 m 1000 900 1750* 900 2500* 2100
(15') (2200) (2000) (3850) (2000) (5500) (4600)
3.0 m 850 750 1500* 800 2400* 1900
(10') (1850) (1650) (3300) (1750) (5300) (4200)
1.5 m 650 550 1300* 750 2350* 1600
(5') (1450) (1200) (2850) (1650) (5150) (3500)
0m 700 550 1200* 700 2200* 1500
(0') (1550) (1200) (2650) (1550) (4850) (3300)
–1.5 m 750 650 1250* 850 2300* 1700 3600* 3600*
(–5') (1650) (1450) (2750) (1850) (5050) (3750) (7900) (7900)
–3.0 m 1000 900 2500* 1750 3300* 3300*
(–10') (2200) (2000) (5500) (3850) (7250) (7250)
Arm length 2000 mm (6'7") With blade and outrigger on ground
4.5 m 950 850 1000* 900 2400* 2000
(15') (2100) (1850) (3500) (2000) (5300) (4400)
3.0 m 800 700 1400* 800 2300* 1750
(10') (1750) (1550) (3100) (1750) (5050) (3850)
1.5 m 600 500 1200* 750 2200* 1500
(5') (1300) (1100) (2650) (1650) (4850) (3300)
0m 650 550 1100* 700 2100* 1450
(0') (1450) (1200) (2400) (1550) (4600) (3200)
–1.5 m 700 550 1150 800 2200* 1600 3500* 3500*
(–5') (1550) (1200) (2550) (1850) (4850) (3500) (7700) (7700)
–3.0 m 950 850 2300* 1700 3200* 3200*
(–10') (2100) (1850) (5050) (3750) (7050) (7050)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard NO. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping
load.
2F-20
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130-7 (One piece boom)
Conditions: unit: kg
A MAX 6.0 m 4.5 m 3.0 m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2100 mm Without stabilizer
7.5 m *2800 *2800
-1.5 m 2650 1300 2800 1350 4550 2100 *8950 3950 *5800 *5800
0.0 m *2700 2250 3550 2250 5700 3500 *7550 6800 *5800 *5800
-1.5 m *3400 1650 3650 1700 5900 2650 *8950 5000 *5800 *5800
-1.5 m *3400 2150 3900 2700 *6000 4200 *8950 8650 *5800 *5800
2F-21
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130-7 (One piece boom)
Conditions: unit: kg
A MAX 6.0 m 4.5 m 3.0 m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2500 mm Without stabilizer
7.5 m *2200 *2200 *2500 *2500
-1.5 m 2400 1150 2800 1350 4450 2100 *9300 3950 *5250 *5250
-1.5 m *2750 1900 350 2250 5650 3450 *9300 6800 *5250 *5250
-1.5 m *2750 1450 3650 1700 5950 2650 *9300 5000 *5250 *5250
-1.5 m *2750 2350 3900 2700 *6100 4250 *9300 8650 *5250 *5250
2F-22
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130-7 (Two piece boom)
Conditions: unit: kg
A MAX 6.0 m 4.5 m 3.0 m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2100 mm Without stabilizer
7.5 m *2700 *2700
-1.5 m 2400 1150 2750 1400 4400 2050 *8600 3900 *4550 *4550
-1.5 m *2950 1900 3500 2150 5600 3400 *8600 6750 *4550 *4550
-1.5 m 2950 1450 3600 1650 5750 2550 8600 4950 *4550 *4550
-1.5 m *2950 2350 3900 2650 *5750 4150 *8600 8600 *4550 *4550
2F-23
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130-7 (Two piece boom)
Conditions: unit: kg
A MAX 6.0 m 4.5 m 3.0 m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2500 mm Without stabilizer
7.5 m *2100 *2100 *3000 2750
-1.5 m 2200 1050 2750 1300 4400 2050 *8450 3850 *4200 *4200
-1.5 m *2400 1750 3500 2150 5600 3400 *8450 6750 *4200 *4200
-1.5 m *2400 1300 3600 1650 *5850 2550 *8450 4900 *4200 *4200
-1.5 m *2400 2150 3900 2650 *5850 4200 *8450 *8450 *4200 *4200
2F-24
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130-7 (Two piece boom with rotary arm)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2600 mm Front outrigger + rear blade
7.5 m *1950 *1950
3.0 m *1500 *1500 *2300 1700 *2300 1700 *3000 2650 *3700 *3700 *5300 *5300
1.5 m *1600 1550 2550 1650 2550 1650 *3450 2500 *4600 4050 *6850 *6850
0.0 m *1750 1600 *2200 1600 *2200 1600 3600 2350 *5250 3800 *5700 *5700
3.0 m *1500 *1500 *2300 *2300 *2300 *2300 *3000 *3000 *3700 *3700 *5300 *5300
1.5 m *1600 *1600 2400 2300 2400 2300 *3450 3400 *4600 *4600 *6850 *6850
0.0 m *1750 *1750 *2200 *2200 *2200 *2200 3450 2350 *5250 *5250 *5700 *5700
2F-25
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2200 3450* 3300*
(20') (5100) (4800) (7600) (7300)
4.5 m 2150* 1650 3550* 1950 3800* 3250
(15') (4700) (3600) (7800) (4300) (8400) (7100)
3.0 m 2200* 1450 3850 1850 4700* 3050 6750* 5850
(10') (4800) (3200) (8500) (4100) (10300) (6700) (14800) (12900)
1.5 m 2350* 1350 3750 1800 5650* 2800 7400* 5250
(5') (5200) (3000) (8200) (4000) (12400) (6200) (16300) (11500)
0.0 m 2700* 1400 3650 1700 6000 2650 7550* 5000
(0') (5900) (3100) (8000) (3700) (13200) (5800) (16600) (11000)
–1.5 m 3400* 1650 3650 1700 5900 2650 8950* 5000 5800* 5800*
(–5') (7500) (3600) (8000) (3700) (13000) (5800) (19700) (11000) (12800) (12800)
–3.0 m 3850* 2250 4800* 2700 7200* 5150
(–10') (8500) (4900) (10600) (5900) (15800) (11300)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2300* 3450* 3450*
(20') (5100) (5100) (7600) (7600)
4.5 m 2150* 2150* 3550* 2950 3800* 3800*
(15') (4700) (4700) (7880) (6500) (8400) (8400)
3.0 m 2200* 2200* 3850* 2900 4700* 4700* 6750* 6750*
(10') (4800) (4800) (8500) (6400) (10300) (10300) (14800) (14800)
1.5 m 2350* 2150 4000* 2800 5650* 4450 7400* 7400*
(5') (5200) (4700) (8800) (6200) (12400) (9800) (16300) (16300)
0.0 m 2700* 2250 3950 2700 6150* 4250 7550* 7550*
(0') (5900) (4900) (8700) (5900) (13500) (9300) (16600) (16600)
–1.5 m 3400* 2600 3900 2700 6000* 4200 8950* 8650 5800* 5800*
(–5') (7500) (5700) (8600) (5900) (13200) (9200) (19700) (19000) (12800) (12800)
–3.0 m 3850* 3550 4800* 4300 7200* 7200*
(–10') (8500) (7800) (10600) (9500) (15800) (15800)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 2300* 3450* 3450*
(20') (5100) (5100) (7600) (7600)
4.5 m 2150* 2150* 3550* 2450 3800* 3800*
(15') (4700) (4700) (7800) (5400) (8400) (8400)
3.0 m 2200* 1850 3700* 2400 4700* 3900 6750* 6750*
(10') (4800) (4100) (8100) (5300) (10300) (8600) (14800) (14800)
1.5 m 2350* 1750 3600 2300 5650* 3650 7400* 7050
(5') (5200) (3800) (7900) (5100) (12400) (8000) (16300) (15500)
0.0 m 2700* 1850 3550 2250 5700 3500 7550* 6800
(0') (5900) (4100) (7800) (4900) (12500) (7700) (16600) (15000)
–1.5 m 3350 2150 3500 2250 5650 3450 8950* 6800 5800* 5800*
(–5') (7400) (4700) (7700) (4900) (12400) (7600) (19700) (15000) (12800) (12800)
–3.0 m 3850* 2900 4800* 3550 7200* 6950
(–10') (8500) (6400) (10600) (7800) (15800) (15300)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 2800* 2800*
(25') (6200) (6200)
6.0 m 2300* 1800 3450* 2750
(20') (5100) (4000) (7600) (6000)
4.5 m 2150* 1350 3050 1600 3800* 2700
(15') (4700) (3000) (6700) (3500) (8400) (5900)
3.0 m 2200* 1150 3000 1550 4700* 2500 6750* 4750
(10') (4800) (2500) (6600) (3400) (10300) (5500) (14800) (10400)
1.5 m 2200 1100 2900 1450 4650 2300 7400* 4200
(5') (4800) (2400) (6400) (3200) (10200) (5100) (16300) (9200)
0.0 m 2300 1100 2800 1400 4500 2150 7550* 3950
(0') (5100) (2400) (6200) (3100) (9900) (4700) (16600) (8700)
–1.5 m 2650 1300 2800 1350 4550 2100 8950* 3950 5800* 5800*
(–5') (5800) (2900) (6200) (3000) (10000) (4600) (19700) (8700) (12800) (12800)
–3.0 m 3700 1850 4550 2200 7200* 4100
(–10') (8100) (4100) (10000) (4800) (15800) (9000)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-26
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 1950
(20') (4100) (4100) (4400) (4300)
4.5 m 1750* 1500 3300* 2000 3450* 3300*
(15') (3800) (3300) (7300) (4400) (7600) (7300)
3.0 m 1800* 1300 3700* 1900 4400* 3100 6050* 6050*
(10') (4000) (2900) (8100) (4200) (9700) (6800) (13300) (13300)
1.5 m 1950* 1250 3800 1800 5400* 2900 8650* 5400
(5') (4300) (2700) (8400) (4000) (11900) (6400) (19000) (11900)
0.0 m 2200* 1300 3700 1750 6000 2700 7950* 5050
(0') (4800) (2900) (8100) (3800) (13200) (5900) (17500) (11100)
–1.5 m 2750* 1450 3650 1700 5950 2650 9300* 5000 5250* 5250*
(–5') (6000) (3200) (8000) (3700) (13100) (5800) (20500) (11000) (11500) (11500)
–3.0 m 3750* 1950 5250* 2650 7900* 5100 8800* 8800*
(–10') (8200) (4300) (11500) (5800) (17400) (11200) (19400) (19400)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 2000*
(20') (4100) (4100) (4400) (4400)
4.5 m 1750* 1750* 3300* 3000 3450* 3450*
(15') (3800) (3800) (7300) (6600) (7600) (7600)
3.0 m 1800* 1800* 3700* 2950 4400* 4400* 6050* 6050*
(10') (4000) (4000) (8100) (6500) (9700) (9700) (13300) (13300)
1.5 m 1950* 1950* 4050 2800 5400* 4500 8650* 8650*
(5') (4300)* (4300) (8900) (6200) (11900) (16500) (19000) (19000)
0.0 m 2200* 2050 3950 2750 6050* 4300 7950* 7950*
(0') (4800) (4500) (8700) (6000) (13300) (9500) (17500) (17500)
–1.5 m 2750* 2350 3900 2700 6100* 4250 9300* 8650 5250* 5250
(–5') (6000) (5200) (8600) (5900) (13400) (9300) (20500) (19000) (11500) (11500)
–3.0 m 3750* 3050 5250* 4250 7900* 7900* 8800* 8800*
(–10') (8200) (6700) (11500) (9300) (17400) (17400) (19400) (19400)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1850* 2000* 2000*
(20') (4100) (4100) (4400) (4400)
4.5 m 1750* 1750* 3300* 2500 3450* 3450*
(15') (3800) (3800) (7300) (5500) (7600) (7600)
3.0 m 1800* 1700 3700* 2450 4400* 3950 6050* 6050*
(10') (4000) (3700) (8100) (5400) (9700) (8700) (13300) (13300)
1.5 m 1950* 1650 3650 2350 5400* 3700 8650* 7250
(5') (4300) (3600) (8000) (5200) (11900) (8100) (19000) (15900)
0.0 m 2200* 1700 3550 2250 5750 3550 7950* 6850
(0') (4800) (3700) (7800) (4900) (12600) (7800) (17500) (15100)
–1.5 m 2750* 1900 3500 2250 5650 3450 9300* 6800 5250* 5250*
(–5') (6000) (4200) (7700) (4900) (12400) (7600) (20500) (15000) (11500) (11500)
–3.0 m 3750* 2500 *5250 3450 7900* 6900 8800* 8800*
(–10') (8200) (5500) (11500) (7600) (17400) (15200) (19400) (19400)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2200* 2200* 2500* 2500*
(25') (4800) (4800) (5500) (5500)
6.0 m 1850* 1600 2000* 1600
(20') (4100) (3500) (4400) (3500)
4.5 m 1750* 1200 3100 1650 3450* 2750
(15') (3800) (2600) (6800) (3600) (7600) (6000)
3.0 m 1800* 1050 3000 1550 4400* 2600 6050* 5000
(10') (4000) (2300) (6600) (3400) (9700) (5700) (13300) (11000)
1.5 m 1950* 1000 2900 1500 4750 2350 8650* 4350
(5') (4300) (2200) (6400) (3300) (10400) (5200) (19000) (9600)
0.0 m 2100 1000 2800 1400 4550 2200 7950* 4000
(0') (4600) (2200) (6200) (3100) (10000) (4800) (17500) (8800)
–1.5 m 2400 1150 2800 1350 4450 2100 9300* 3950 5250* 5250*
(–5') (5300) (2500) (6200) (3000) (9800) (4600) (20500) (8700) (11500) (11500)
–3.0 m 3150 1550 4450 2150 7900* 4050 8800* 8800*
(–10') (6900) (3400) (9800) (4700) (17400) (8900) (19400) (19400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-27
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 1950 3100* 3100*
(20') (4800) (4300) (6800) (6800)
4.5 m 2050* 1500 3250* 1900 3350* 3200
(15') (4500) (3300) (7100) (4200) (7400) (7000)
3.0 m 2050* 1300 3600* 1850 4450* 3000 6700* 5800
(10') (4500) (2900) (7900) (4100) (9800) (6600) (14700) (12800)
1.5 m 2150 1200 3750 1750 5350 2750
(5') (4700) (2600) (8200) (3800) (11800) (6000)
0.0 m 2450 1250 3650 1650 5850 2600 5300* 4900
(0') (5400) (2700) (8000) (3600) (12900) (5700) (11700) (10800)
–1.5 m 2950 1450 3600 1650 5750 2550 8600 4950 4550 4550
(–5') (6500) (3200) (7900) (3600) (12600) (5600) (18900) (10900) (10000) (10000)
–3.0 m 3500 1950 4850* 2600 7150 5050
(–10') (7700) (4300) (10700) (5700) (15700) (11100)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 2200* 3100* 3100*
(20') (4800) (4800) (6800) (6800)
4.5 m 2050* 2050* 3250* 2950 3550* 3550*
(15') (4500) (4500) (7100) (6500) (7800) (7800)
3.0 m 2050* 2050* 3600* 2850 4450* 4450* 6700* 6700*
(10') (4500) (4500) (7900) (6300) (9800) (9800) (14700) (14700)
1.5 m 2150* 2000 4000* 2750 5350* 4400
(5') (4700) (4400) (8800) (6000) (11800) (9700)
0.0 m 2450* 2050 3900 2700 5850* 4200 5300* 5300*
(0') (5400) (4500) (8600) (5900) (12900) (9200) (11700) (11700)
–1.5 m 2950* 2350 3900 2650 5750* 4150 8600* 8600* 4550* 4550*
(–5') (6500) (5200) (8600) (5800) (12600) (9100) (18900) (18900) (10000) (10000)
–3.0 m 3500* 3150 4850* 4250 7150* 7150*
(–10') (7700) (6900) (10700) (9300) (15700) (15700)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 2200* 3100* 3100*
(20') (4800) (4800) (6800) (6800)
4.5 m 2050* 1950 3250* 2450 3550* 3550*
(15') (4500) (4300) (7100) (5400) (7800) (7880)
3.0 m 2050* 1700 3600* 2350 4450* 3850 6700* 6700*
(10') (4500) (3700) (7900) (5200) (9800) (8500) (14700) (14700)
1.5 m 2150* 1600 3600 2250 5350* 3600
(5') (4700) (3500) (7900) (4900) (11800) (7900)
0.0 m 2450* 1700 3500 2200 5650 3450 5300* 5300*
(0') (5400) (3700) (7700) (4800) (12400) (7600) (11700) (11700)
–1.5 m 2950* 1900 3500 2150 5600 3400 8600* 6750 4550* 4550*
(–5') (6500) (4200) (7700) (4700) (12300) (7500) (18900) (14800) (10000) (10000)
–3.0 m 3500* 2600 4850* 3450 7150* 6900
(–10') (7700) (5700) (10700) (7600) (15700) (15200)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 2700* 2700*
(25') (5900) (5900)
6.0 m 2200* 1600 3100* 2750
(20') (4800) (3500) (6800) (6000)
4.5 m 2050* 1200 3050 1650 3550* 2700
(15') (4500) (2600) (6700) (3600) (7800) (5900)
3.0 m 2050* 1000 2950 1600 4450* 2450 6700* 4700
(10') (4500) (2200) (6500) (3500) (9800) (5400) (14700) (10300)
1.5 m 2050 950 2850 1500 4650 2250
(5') (4500) (2100) (6300) (3300) (10200) (4900)
0.0 m 2100 1000 2750 1400 4450 2100 5300* 3850
(0') (4600) (2200) (6000) (3100) (9800) (4600) (11700) (8500)
–1.5 m 2400 1150 2750 1400 4400 2050 8600* 3900 4550* 4550*
(–5') (5300) (2500) (6000) (3100) (9700) (4500) (18900) (8600) (10000) (10000)
–3.0 m 3250 1600 4500 2100 7150* 4000
(–10') (7100) (3500) (9900) (4600) (15700) (8800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-28
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.55 m3 (0.72 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100* 3000* 3000*
(25') (4600) (4600) (6600) (6600)
6.0 m 1800* 1700 2900* 1950
(20') (4000) (3700) (6400) (4300)
4.5 m 1650* 1350 3000* 1950 3200* 3200*
(15') (3600) (3000) (6600) (4300) (7000) (7000)
3.0 m 1650* 1200 3400* 1900 4150* 3100 5900* 5900*
(10') (3600) (2600) (7500) (4200) (9100) (6800) (13000) (13000)
1.5 m 1750* 1100 3750 1750 5150* 2800 6300* 5300
(5') (3800) (2400) (8200) (3800) (11300) (6200) (13900) (11700)
0.0 m 2000* 1150 3650 1700 5800* 2650 5700* 4950
(0') (4400) (2500) (7900) (3700) (12800) (5800) (12550) (10900)
–1.5 m 2400* 1300 3600 1650 5850* 2550 8450* 4900
(–5') (5300) (2900) (7900) (3600) (12900) (5600) (18600) (10800)
–3.0 m 3300* 1700 5200* 2600 7750* 5000
(–10') (7300) (3700) (11400) (5700) (17000) (11000)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100*
(25') (4600) (4600)
6.0 m 1800* 1800* 2900* 2900*
(20') (4000) (4000) (6400) (6400)
4.5 m 1650* 1650* 3000* 3000 3200* 3200*
(15') (3600) (3600) (6600) (6600) (7000) (7000)
3.0 m 1650* 1650* 3400* 2900 4150* 4150* 5900* 5900*
(10') (3600) (3600) (7500) (6400) (9100) (9100) (13000) (13000)
1.5 m 1750* 1750* 3850* 2800 5150* 4450 6300* 6300*
(5') (3800) (3800) (8500) (6200) (11300) (9800) (13900) (13900)
0.0 m 2000* 1900 3900 2700 5800* 4250 5700* 5700*
(0') (4400) (4200) (8600) (5900) (12800) (9300) (12500) (12500)
–1.5 m 2400* 2150 3900 2650 5850* 4200 8450* 8450* 4200* 4200*
(–5') (5300) (4700) (8600) (5800) (12900) (9200) (18600) (18600) (9200) (9200)
–3.0 m 3300* 2700
(–10') (7300) (5900)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100*
(25') (4600) (4600)
6.0 m 1800* 1800* 2900* 2500
(20') (4000) (4000) (6400) (5500)
4.5 m 1650* 1650* 3000* 2500 3200* 3200*
(15') (3600) (3600) (6600) (5500) (7000) (7000)
3.0 m 1650* 1550 3400* 2400 4150* 3950 5900* 5900*
(10') (3600) (3400) (7500) (5300) (9100) (8700) (13000) (13000)
1.5 m 1750* 1500 3650 2300 5150* 3650 6300* 6300*
(5') (3800) (3300) (8000) (5100) (11300) (8000) (13900) (13900)
0.0 m 2000* 1550 3500 2200 5700 3450 5700* 5700*
(0') (4400) (3400) (7700) (4800) (12500) (7600) (12500) (12500)
–1.5 m 2400* 1750 3500 2150 5600 3400 8450* 6750 4200* 4200*
(–5') (5300) (3800) (7700) (4700) (12300) (7500) (18600) (14800) (9200) (9200)
–3.0 m 3300* 2250 5200* 3450 7750* 8650
(–10') (7300) (4900) (11400) (7600) (17000) (19000)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2100* 2100* 3000* 2750
(25') (4600) (4600) (6600) (6000)
6.0 m 1800* 1400 2900* 1600
(20') (4000) (3100) (6400) (3500)
4.5 m 1650* 1100 3000* 1600 3200* 2750
(15') (3600) (2400) (6600) (3500) (7000) (6000)
3.0 m 1650* 950 3000 1550 4150* 2550 5900* 4950
(10') (3600) (2100) (6600) (3400) (9100) (5600) (13000) (10900)
1.5 m 1750* 850 2900 1450 4700 2300 6300 4200
(5') (3800) (1900) (6400) (3200) (10300) (5000) (13900) (9200)
0.0 m 1950 900 2800 1350 4500 2100 5700 3900
(0') (4300) (2000) (6200) (3000) (9900) (4600) (12500) (8600)
–1.5 m 2200 1050 2750 1300 4400 2050 8450* 3850 4200* 4200*
(–5') (4800) (2300) (6000) (2900) (9700) (4500) (18600) (8500) (9200) (9200)
–3.0 m 2800 1350 4450 2100 7750* 3950
(–10') (6200) (3000) (9800) (4600) (17000) (8700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-29
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW130ES-6 (Two piece boom with rotary arm)
Conditions:
Boom: 4800 mm (15'9"), Bucket (SAE): 0.55 m3 (0.72 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1950* 1950*
(25') (4300) (4300)
6.0 m 1600* 1600* 2600* 2600*
(20') (3500) (3500) (5700) (5700)
4.5 m 1500* 1500* 2650* 2650* 2850* 2850*
(15') (3300) (3300) (5800) (5800) (6300) (6300)
3.0 m 1500* 1500* 3000* 2650 3700* 3700* 5300* 5300*
(10') (3300) (3300) (6600) (5800) (8100) (8100) (11700) (11700)
1.5 m 1600* 1550 3450* 2500 4600* 4050 6850* 6850*
(5') (3500) (3400) (7600) (5500) (10100) (8900) (15100) (15100)
0.0 m 1750* 1600 3600 2350 5250* 3800 5700* 5700*
(0') (3800) (3500) (7900) (5200) (11500) (8400) (12500) (12500)
–1.5 m 2100* 1800 3550 2300 5300* 3700 8250* 7750 4000* 4000*
(–5') (4600) (4000) (7800) (5100) (11700) (8100) (18100) (17000) (8800) (8800)
–3.0 m 2900* 2350 3100* 2400 4750* 3750 7150* 7150* 7200* 7200*
(–10') (6400) (5200) (6800) (5300) (10400) (8200) (15700) (15700) (15800) (15800)
Front and rear outrigger above ground Arm length 2600 mm (8'6")
7.5 m 1950* 1950*
(25') (4300) (4300)
6.0 m 1600* 1600* 2600* 2600*
(20') (3500) (3500) (5700) (5700)
4.5 m 1500* 1500* 2650* 2650* 2850* 2850*
(15') (3300) (3300) (5800) (5800) (6300) (6300)
3.0 m 1500* 1500* 3000* 3000* 3700* 3700* 5300* 5300*
(10') (3300) (3300) (6600) (6600) (8100) (8100) (11700) (11700)
1.5 m 1600* 1600* 3450* 3400 4600* 4600* 6850* 6850*
(5') (3500) (3500) (7600) (7500) (10100) (10100) (15100) (15100)
0.0 m 1750* 1750* 3450 2350 5250* 5250* 5700* 5700*
(0') (3800) (3800) (7600) (5200) (11500) (11500) (12500) (12500)
–1.5 m 2100* 2100* 3550 2300 5300* 5200 8250* 8250* 4000* 4000*
(–5') (4600) (4600) (7800) (5100) (11700) (11400) (18100) (18100) (8800) (8800)
–3.0 m 2900* 2900* 3100* 3100* 4750* 4750* 7150* 7150* 7200* 7200*
(–10') (6400) (6400) (6800) (6800) (10400) (10400) (15700) (15700) (15800) (15800)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-30
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2350 3900* 2500 4450* 4050
(15') (5500) (5150) (8550) (5500) (9800) (9800)
3.0 m 2450* 2050 4350 2450 5400* 3900
(10') (5400) (4500) (9550) (5400) (11850) (8550)
1.5 m 2600* 1950 4700* 2400 6250* 3600
(5') (5700) (4300) (10300) (5250) (13750) (7900)
0.0 m 2950* 2050 4850* 2350 6700* 3600 5950* 5950*
(0') (6500) (4500) (10650) (5150) (14750) (7900) (13100) (13100)
–1.5 m 3700* 2400 6300* 3550 9300* 6700 5450* 5450*
(–5') (8100) (5250) (13850) (7800) (20450) (14750) (12000) (12000)
–3.0 m 3950* 3450 4500* 3700 7050* 6900
(–10') (8700) (7600) (9900) (8150) (15500) (15150)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100*
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2500* 3900* 3850 4450* 4450*
(15') (5500) (5500) (8550) (8450) (9800) (9800)
3.0 m 2450* 2450* 4350* 3800 5400* 5400*
(10') (5400) (5400) (9550) (8350) (11850) (11850)
1.5 m 2600* 2600* 4700* 3750 6250* 5800
(5') (5700) (5700) (10350) (8250) (13750) (12750)
0.0 m 2950* 2950* 4850* 3700 6700* 5750 5950* 5950*
(0') (6500) (6500) (10650) (8100) (14750) (12650) (13100) (13100)
–1.5 m 3700* 3700* 6300* 5750 9300* 9300* 5450* 5450*
(–5') (8100) (8100) (13850) (12650) (20450) (20450) (12000) (12000)
–3.0 m 3950* 3950* 4500* 4500* 7050* 7050*
(–10') (8700) (8700) (9900) (9900) (15500) (15500)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2750* 4100* 4100*
(20') (6050) (6050) (9000) (9000)
4.5 m 2500* 2500* 3900* 3200 4450* 4450*
(15') (5500) (5500) (8550) (7050) (9800) (9800)
3.0 m 2450* 2450* 4350* 3150 5400* 5000
(10') (5400) (5400) (9550) (6900) (11850) (11000)
1.5 m 2600* 2550 4400* 3100 6250* 4750
(5') (5700) (5600) (9650) (6800) (13750) (10450)
0.0 m 2950* 2650 4350 3050 6700* 4700 5950* 5950*
(0') (6500) (5800) (9550) (6700) (14750) (10350) (13100) (13100)
–1.5 m 3700* 2350 6300* 4700 9300* 9300* 5450* 5450*
(–5') (8100) (5150) (13850) (10350) (20450) (20450) (12000) (12000)
–3.0 m 3950* 3950 4500* 4500* 7050* 7050*
(–10') (8700) (8700) (9900) (9900) (15500) (15500)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 3650* 3650*
(25') (8000) (8000)
6.0 m 2750* 2550 4100* 3400*
(20') (6050) (5600) (9000) (7450)
4.5 m 2500* 1900 3800 2500 4450* 3350
(15') (5500) (4150) (8350) (5500) (9800) (7350)
3.0 m 2450* 1650 7500 2000 5400* 3200
(10') (5400) (3600) (16500) (4400) (11850) (7050)
1.5 m 2600* 1550 3700 1950 5800 2950
(5') (5500) (3400) (8100) (4300) (12750) (6500)
0.0 m 2950* 1650 3650 1900 5750 2900 5950* 5250
(0') (6500) (3600) (8700) (4150) (12650) (6350) (13100) (11550)
–1.5 m 3700* 1950 5750 2900 9300* 5350 5450* 5450*
(–5') (8100) (4300) (12750) (6350) (20450) (11750) (12000) (12000)
–3.0 m 3950* 2800 4500* 3000 7050* 5500
(–10') (8700) (6150) (9900) (6600) (15500) (12100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-31
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 2500 4050* 4050*
(15') (4300) (4300) (8350) (5500) (8900) (8900)
3.0 m 1950* 1850* 4150* 2450 5050* 3900 7250* 7250*
(10') (4300) (4050) (9100) (5400) (11100) (8550) (15950) (15950)
1.5 m 2050* 1800 4550* 2400 6050* 3700 6150* 6150*
(5') (4500) (3950) (10000) (5250) (13300) (8150) (13500) (13500)
0.0 m 2350* 1850 4800* 2300 6650* 3550 6500* 6500*
(0') (5150) (4050) (10550) (5050) (14600) (7800) (14300) (14300)
–1.5 m 2900* 2150 4500* 2300 6450* 3550 9750* 6700 5000* 5000*
(–5') (6350) (4700) (9900) (5050) (14200) (7800) (21450) (14750) (11000) (11000)
–3.0 m 3900* 2900 5250* 3600 7850* 6850
(–10') (8550) (6350) (11550) (7900) (17250) (15050)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 3800* 4050* 4050*
(15') (4300) (4300) (8350) (8350) (8900) (8900)
3.0 m 1950* 1950* 4150* 3800 5050* 5050* 7250* 7250*
(10') (4300) (4300) (9100) (8350) (11100) (11100) (15950) (15950)
1.5 m 2050* 2050* 4550* 3750 6050* 5900 6150* 6150*
(5') (4500)* (4500) (10000) (8250) (13300) (12950) (13500) (13500)
0.0 m 2350* 2350* 4800* 3650 6650* 5750 6500* 6500*
(0') (5150) (5150) (10550) (8000) (14600) (12650) (14300) (14300)
–1.5 m 2900* 2900* 4500* 3650 6450* 5700 9750* 9750* 5000* 5000*
(–5') (6350) (6350) (9900) (8000) (14200) (12550) (21450) (21450) (11000) (11000)
–3.0 m 3900* 3900* 5250* 5250* 7850* 7850*
(–10') (8550) (8550) (11550) (11550) (17250) (17250)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3600*
(20') (4600) (4600) (7900) (7900)
4.5 m 1950* 1950* 3800* 3200 4050* 4050*
(15') (4300) (4300) (8350) (7050) (8900) (8900)
3.0 m 1950* 1950* 4150* 3150 5050* 5050* 7250* 7250*
(10') (4300) (4300) (9100) (6900) (11100) (11100) (15950) (15950)
1.5 m 2050* 2050* 4400 3100 6050* 4800 6150* 6150*
(5') (4500) (4500) (9650) (6800) (13300) (10550) (13500) (13500)
0.0 m 2350* 2350* 4350 3000 6650* 4700 6500* 6500*
(0') (5150) (5150) (9550) (6600) (14600) (10350) (14300) (14300)
–1.5 m 2900* 2800 4350 3000 6450* 4650 9750* 9250 5000* 5000*
(–5') (6350) (6150) (9550) (9550) (14200) (10200) (21450) (20350) (11000) (11000)
–3.0 m 3900* 3750 5250* 4700 7850* 7850*
(–10') (8550) (8250) (11550) (10350) (17250) (17250)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2650* 2650*
(25') (5800) (5800)
6.0 m 2100* 2100* 3600* 3400
(20') (4600) (4600) (5790) (7450)
4.5 m 1950* 1700 3800* 2050 4050* 3400
(15') (4300) (3750) (8350) (4500) (8900) (7450)
3.0 m 1950* 1500 3750 2000 5050* 3200 7250* 5950
(10') (4300) (3300) (8250) (4400) (11100) (11100) (15950) (13100)
1.5 m 2050* 1400 3700 1950 5900 3000 6150* 5500
(5') (4500) (3050) (8150) (4300) (12950) (6600) (13500) (12100)
0.0 m 2350* 1500 3600 1850 5750 2900 6500* 5300
(0') (5150) (3300) (7900) (4050) (12650) (6350) (14300) (11650)
–1.5 m 2900* 1700 3600 1850 5700 2850 9750* 5300 5000* 5000*
(–5') (6350) (3750) (7900) (4050) (12550) (6250) (21450) (11650) (11000) (11000)
–3.0 m 3900* 2350 5250* 2900 7850* 5400
(–10') (8550) (5150) (11550) (6350) (17250) (11850)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-32
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (One piece boom)
Conditions: Boom: 4600 mm (15'1"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires:10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2500
(20') (3600) (3600) (5800) (5500)
4.5 m 1550* 1550* 3400* 2500 3500* 3500*
(15') (3400) (3400) (7450) (5500) (7700) (7700)
3.0 m 1550* 1550* 3800* 2450 4500* 3950 6150* 6150*
(10') (3400) (3400) (8350) (5400) (9900) (8700) (13500) (13500)
1.5 m 1650* 1550* 4300* 2350 5650* 3700 9100* 6950
(5') (3600) (3400) (9450) (5150) (12400) (8150) (20000) (15300)
0.0 m 1850* 1600 4650* 2250 6400* 3500 6800* 6600
(0') (4050) (3500) (10200) (4950) (14050) (7700) (14950) (14500)
–1.5 m 2200* 1800 4650* 2250 6500* 3450 9350* 6550 4300* 4300*
(–5') (4850) (3950) (10200) (4950) (14300) (7600) (20550) (14400) (9450) (9450)
–3.0 m 3050* 2350 5650* 3400 8600* 6650 7700* 7700*
(–10') (6700) (5150) (12400) (7450) (18900) (14600) (16950) (16950)
Blade and rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2650*
(20') (3600) (3600) (5800) (5800)
4.5 m 1550* 1550* 3400* 3400* 3500* 3500*
(15') (3400) (3400) (7450) (7450) (7700) (7700)
3.0 m 1550* 1550* 3800* 3800* 4500* 4500* 6150* 6150*
(10') (3400) (3400) (8350) (8350) (9900) (9900) (13500) (13500)
1.5 m 1650* 1650* 4300* 3700 5650* 5650* 9100* 9100*
(5') (3600) (3600) (9450) (8150) (12400) (12400) (20000) (20000)
0.0 m 1850* 1850* 4650* 3600 6400* 5700 6800* 6800*
(0') (4050) (6500) (10200) (7900) (14050) (12550) (14950) (14950)
–1.5 m 2200* 2200* 4650* 3600 6500* 5650 9350* 9350* 4300* 4300*
(–5') (4850) (4850) (10200) (7900) (14300) (12650) (20550) (20550) (9450) (9450)
–3.0 m 3050* 3050* 5650* 5600 8600* 8600* 7700* 7700*
(–10') (6700) (6700) (12400) (12300) (18900) (18900) (16950) (16950)
Rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2650*
(20') (3600) (3600) (5800) (5800)
4.5 m 1550* 1550* 3400* 3200 3500* 3500*
(15') (3400) (3400) (7450) (7050) (7700) (7700)
3.0 m 1550* 1550* 3800* 2450 4500* 4500* 6150* 6150*
(10') (3400) (3400) (8350) (5400) (9900) (9900) (13500) (13500)
1.5 m 1650* 1650* 4300* 2350 5650* 4850 9100* 9100*
(5') (3600) (3600) (9450) (5150) (12400) (10650) (20000) (20000)
0.0 m 1850* 1850* 4650* 3600 6400* 4650 6800* 6800*
(0') (4050) (6500) (10200) (7900) (14050) (10200) (14950) (14950)
–1.5 m 2200* 2200* 4650* 3600 6500* 4550 9350* 9100 4300* 4300*
(–5') (4850) (4850) (10200) (7900) (14300) (10000) (20550) (20000) (9450) (9450)
–3.0 m 3050* 3050* 5650* 4500 8600* 8600* 7700* 7700*
(–10') (6700) (6700) (12400) (9900) (18900) (18900) (16950) (16950)
Blade above ground Arm length 3000 mm (9'10")
7.5 m 2000* 2000*
(25') (4400) (4400)
6.0 m 1650* 1650* 2650* 2050
(20') (3600) (3600) (5800) (4500)
4.5 m 1550* 1450 3400* 2050 3500* 3400
(15') (3400) (3200) (7450) (4500) (7700) (7450)
3.0 m 1650* 1250 3750 2000 4500* 3250 6150* 6150*
(10') (3600) (3750) (8250) (4400) (9900) (7150) (13500) (13500)
1.5 m 1650* 1200 3650 1900 5650* 3000 9100* 5500
(5') (3600) (2650) (8000) (4150) (12400) (6600) (20000) (12100)
0.0 m 1850* 1250 3550 1800 5700 2850 6800* 5200
(0') (4050) (2750) (7800) (3950) (12550) (6250) (14950) (11450)
–1.5 m 2200* 1450 3500 1800 5650 2750 9350* 5150 4300* 4300*
(–5') (4850) (3200) (7700) (3950) (12740) (6050) (20550) (11300) (9450) (9450)
–3.0 m 3050* 1900 5600 2750 8600* 5250 7700* 7700*
(–10') (6700) (4150) (12300) (6050) (18900) (11550) (16950) (16950)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-33
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2100 mm (6'11")
7.5 m 3300* 3300*
(25') (7250) (7250)
6.0 m 2550* 2550* 4250* 4050*
(20') (5600) (5600) (9350) (8900)
4.5 m 2350* 2150 4350* 2450 4750* 4000
(15') (5150) (5150) (9550) (5400) (10450) (8800)
3.0 m 2400* 1900 4700* 2400 5900* 3800
(10') (5250) (4150) (10350) (5250) (12950) (8350)
1.5 m 2550* 1800 5150* 2300 6950* 3650
(5') (5600) (3950) (11300) (5050) (15300) (8000)
0.0 m 2950* 1900 5300* 2250 7050* 3500 4800* 4800*
(0') (6500) (4150) (11650) (4950) (15500) (7700) (10500) (10500)
–1.5 m 3700* 2200 4800* 2250 7050* 3500 10050* 6700
(–5') (8150) (4850) (10550) (4950) (15500) (7700) (22100) (14750)
–3.0 m 4500* 3100 5450* 3600 8150* 6850
(–10') (9900) (6800) (12000) (7900) (17900) (15050)
Blade and rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 4250*
(20') (5700) (5700) (9350) (9350)
4.5 m 2400* 2400* 4350* 3800 4800* 4800*
(15') (5250) (5250) (9550) (8350) (10550) (10550)
3.0 m 2450* 2450* 4700* 3750 5900* 5900*
(10') (5400) (5400) (10350) (8250) (12950) (12950)
1.5 m 2600* 2600* 5150* 3700 6950* 5800
(5') (5700) (5700) (11300) (8150) (15300) (12750)
0.0 m 2950* 2950* 5300* 3650 7350* 5700 4850* 4850*
(0') (6500) (6500) (11650) (8000) (16150) (12550) (10650) (10650)
–1.5 m 3750* 3550 4850* 3650 7050* 5700 10100* 10100*
(–5') (8250) (7800) (10650) (8000) (15500) (12550) (22200) (22200)
–3.0 m 4500* 4500* 5450* 5450* 8100* 8100*
(–10') (9900) (9900) (12000) (12000) (17900) (17900)
Rear outrigger on ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 4250*
(20') (5700) (5700) (9350) (9350)
4.5 m 2400* 2400* 4350* 3150 4800* 4800*
(15') (5250) (5250) (9550) (6900) (10550) (10550)
3.0 m 2450* 2450* 4450 3100 5900* 4950
(10') (5400) (5400) (9800) (6800) (12950) (10900)
1.5 m 2600* 2400 4400 3050 6950* 4750
(5') (5700) (5250) (9650) (6700) (15300) (10450)
0.0 m 2950* 2500 4300 2950 6950 4650 4850* 4850*
(0') (6500) (5500) (9450) (6500) (15300) (10200) (10650) (10650)
–1.5 m 3750* 2900 4300 3000 6950 4600 10100* 9200
(–5') (8250) (6350) (9450) (6600) (15300) (10100) (22200) (20250)
–3.0 m 4500* 4050 5450* 4700 8100* 8100*
(–10') (9900) (8900) (12000) (10350) (17900) (17900)
Blade above ground Arm length 2100 mm (6'11")
7.5 m 3350* 3350*
(25') (7350) (7350)
6.0 m 2600* 2600* 4250* 3950
(20') (5700) (5700) (9350) (8700)
4.5 m 2400* 2100 3750 2350 4800* 3850
(15') (5400) (4600) (8250) (5150) (10550) (8450)
3.0 m 2450* 1800 3700 2300 5900* 3700
(10') (4500) (3950) (8150) (5050) (12950) (8150)
1.5 m 2600* 1750 3650 2250 5850 3500
(5') (5700) (3850) (8000) (4950) (12850) (7700)
0.0 m 2950* 1850 3550 2200 5700 3400 4850* 4850*
(0') (6500) (4050) (7800) (4850) (12550) (7450) (10650) (10650)
–1.5 m 3500 2150 3600 2200 5700 3350 10100* 6400
(–5') (5300) (4700) (7900) (4850) (12550) (7350) (22200) (14050)
–3.0 m 4500* 3000 5450* 3450 8100* 6600
(–10') (9900) (6600) (12000) (7600) (15700) (14500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-34
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 2450 4350* 4050
(15') (4150) (4150) (8800) (5400) (9550) (8900)
3.0 m 1900* 1700 4450* 2400 5500* 3850 8300* 7400
(10') (4150) (3750) (9800) (5250) (12100) (8450) (18250) (16250)
1.5 m 2050* 1650 4950* 2300 6650* 3650
(5') (4500) (3600) (10900) (5050) (14600) (8000)
0.0 m 2350* 1700 5300* 2250 7300* 3500 5350* 5350*
(0') (5150) (3750) (11650) (4950) (16050) (5800) (11750) (11750)
–1.5 m 2900* 2000 5100* 2250 7150* 3450 9100* 6600 4550* 4550*
(–5') (6350) (4400) (11200) (4950) (15700) (5600) (20000) (14500) (10000) (10000)
–3.0 m 4200* 2650 6050* 3500 8950* 6700
(–10') (9250) (5800) (13300) (7700) (19700) (14750)
Blade and rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 3850 4350* 4350*
(15') (4150) (4150) (8800) (8450) (9550) (9550)
3.0 m 1900* 1900* 4450* 3800 5500* 5500* 8300* 8300*
(10') (4150) (4150) (9800) (8350) (12100) (12100) (18250) (18250)
1.5 m 2050* 2050* 4950* 3700 6650* 5850
(5') (4500) (4500) (10900) (8150) (14600) (12850)
0.0 m 2350* 2350* 5300* 3600 7300* 5700 5350* 5350*
(0') (5150) (5150) (11650) (7900) (16050) (12550) (11750) (11750)
–1.5 m 2900* 2900* 5100* 3600 7150* 5650 9100* 9100* 4550* 4550*
(–5') (6350) (6350) (11200) (7900) (15700) (12400) (20000) (20000) (10000) (10000)
–3.0 m 4200* 4200* 6050* 5700 8950* 8950*
(–10') (9250) (9250) (13300) (12550) (19700) (19700)
Rear outrigger on ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3800*
(20') (4500) (4500) (8350) (8350)
4.5 m 1900* 1900* 4000* 3200 4350* 4350*
(15') (4150) (4150) (8800) (7050) (9550) (9550)
3.0 m 1900* 1900* 4450* 3100 5500* 5050 8300* 8300*
(10') (4150) (4150) (9800) (6800) (12100) (11100) (18250) (18250)
1.5 m 2050* 2050* 4400 3050 6650* 4750
(5') (4500) (4500) (9650) (6700) (14500) (10450)
0.0 m 2350* 2250 4300 2950 6950 4650 5350* 5350*
(0') (5150) (4950) (9450) (6500) (15300) (10200) (11750) (11750)
–1.5 m 2900* 2600 4300 2950 6900 4600 9100* 9100* 4550* 4550*
(–5') (6350) (5700) (9450) (6500) (15150) (10100) (20000) (20000) (10000) (10000)
–3.0 m 4200* 3450 6050* 4650 8950* 8950*
(–10') (9250) (7600) (13300) (10200) (19700) (19700)
Blade above ground Arm length 2500 mm (8'2")
7.5 m 2500* 2500*
(25') (5500) (5500)
6.0 m 2050* 2050* 3800* 3400
(20') (4500) (4500) (8350) (7450)
4.5 m 1900* 1550 3800 2000 4350* 3350
(15') (4150) (3400) (8350) (4400) (9550) (7350)
3.0 m 1900* 1350 3750 1950 5500* 3150 8300* 5950
(10') (4150) (2950) (8250) (4300) (12100) (6900) (18250) (13100)
1.5 m 2050* 1300 3650 1850 5850 2950
(5') (4500) (2850) (8000) (4050) (12850) (6500)
0.0 m 2350* 1350 3550 1800 5700 2800 5350* 5200
(0') (5150) (2950) (7800) (3950) (12550) (6150) (11750) (11450)
–1.5 m 2900* 1600 3550 1800 5650 2800 9100* 5200 4550* 4550*
(–5') (6350) (3500) (7800) (3950) (12400) (6150) (20000) (11450) (10000) (10000)
–3.0 m 4150 2100 5700 2850 8950* 5300
(–10') (9100) (4600) (12550) (6250) (19700) (11650)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-35
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom)
Conditions: Boom: 4800 mm (15'9"), Bucket: (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2500
(20') (3400) (3400) (6350) (5500)
4.5 m 1450* 1450* 3600* 2450 3750* 3750*
(15') (3200) (3200) (7900) (5400) (8250) (8250)
3.0 m 1500* 1500* 4100* 2400 4900* 3850 6950* 6950*
(10') (3300) (3300) (9000) (5250) (10750) (8450) (15300) (15300)
1.5 m 1550* 1400 4700* 2300 6200* 3600 6550* 6550*
(5') (3400) (3050) (10350) (5050) (13650) (7900) (14400) (14400)
0.0 m 1750* 1500 5100* 2200 7050* 3450 5550* 5550*
(0') (3850) (3300) (11200) (4850) (15500) (7600) (12200) (12200)
–1.5 m 2150* 1650 5150* 2150 7200* 3350 8050* 6450 3850* 3850*
(–5') (4700) (3600) (11300) (4700) (15850) (7350) (17700) (14200) (8450) (8450)
–3.0 m 2950* 2150 4300* 2200 6500* 3400 9700* 6550 7050* 7050*
(–10') (6500) (4700) (9450) (4850) (14300) (7450) (21350) (14400) (15500) (15500)
Blade and rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2900*
(20') (3400) (3400) (6350) (6350)
4.5 m 1450* 1450* 3600* 3600* 3750* 3750*
(15') (3200) (3200) (7900) (7900) (8250) (8250)
3.0 m 1500* 1500* 4100* 3750 4900* 4900* 6950* 6950*
(10') (3300) (3300) (9000) (8250) (10750) (10750) (15300) (15300)
1.5 m 1550* 1550* 4700* 3650 6200* 5850 6550* 6550*
(5') (3400) (3400) (10350) (8000) (13650) (12850) (14400) (14400)
0.0 m 1750* 1750* 5100* 3550 7050* 5650 5550* 5550*
(0') (3850) (3850) (11200) (7800) (15500) (12400) (12200) (12220)
–1.5 m 2150* 2150* 5150* 3500 7200* 5550 8050* 8050* 3850* 3850*
(–5') (4700) (4700) (11300) (7700) (15850) (12200) (17700) (17700) (8450) (8450)
–3.0 m 2950* 2950* 4300* 3550 6500* 5600 9700* 9700* 7050* 7050*
(–10') (6500) (6500) (9450) (7800) (14300) (12300) (21350) (21350) (15500) (15500)
Rear outrigger on ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2900*
(20') (3400) (3400) (6350) (6350)
4.5 m 1450* 1450* 2900* 3200 3750* 3750*
(15') (3200) (3200) (6350) (7050) (8250) (8250)
3.0 m 1500* 1500* 4100* 3100 4900* 4900* 6950* 6950*
(10') (3300) (3300) (9000) (6800) (10750) (10750) (15300) (15300)
1.5 m 1550* 1550* 4350 3000 6200* 4750 6550* 6550*
(5') (3400) (3400) (9550) (6600) (13650) (10450) (14400) (14400)
0.0 m 1750* 1750* 4250 2900 6900 4550 5550* 5550*
(0') (3850) (3850) (9350) (6350) (15150) (10000) (12200) (12200)
–1.5 m 2150* 2150* 4200 2850 6800 4500 8050* 8050* 3850* 3850*
(–5') (4700) (4700) (9250) (6250) (14950) (9900) (17700) (17700) (8450) (8450)
–3.0 m 2950* 2800 4250 2900 6500* 4500 9700* 9100 7050* 7050*
(–10') (6500) (6150) (9430) (6350) (14300) (9900) (21350) (20000) (15500) (15500)
Blade above ground Arm length 3000 mm (9'10")
7.5 m 1900* 1900*
(25') (4150) (4150)
6.0 m 1550* 1550* 2900* 2050
(20') (3400) (3400) (6350) (4500)
4.5 m 1450* 1300 3600* 2000 3750* 3350
(15') (3200) (2850) (7900) (4400) (8250) (7350)
3.0 m 1500* 1150 3700 1950 4900* 3150 6950* 6100
(10') (3300) (2500) (8150) (4300) (10750) (6900) (15300) (13400)
1.5 m 1550* 1100 3600 1850 5850 2950 6550* 5400
(5') (3400) (2400) (7900) (4050) (12850) (6500) (14400) (11850)
0.0 m 1750* 1150 3500 1750 5650 2750 5550* 5100
(0') (3850) (2500) (7700) (3850) (12400) (6050) (12200) (11200)
–1.5 m 2150* 1300 3450 1700 5550 2700 8050* 5050 3850* 3850*
(–5') (4700) (2850) (7600) (3750) (12200) (5950) (17700) (11100) (8450) (8450)
–3.0 m 2950* 1700 3500 1750 5600 2700 9700* 5150 7050* 7050*
(–10') (6500) (3750) (7700) (3850) (12300) (5950) (21350) (11300) (15500) (15500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-36
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW150ES-6 (Two piece boom with rotary arm)
Conditions:
Boom: 4800 mm (15'9"), Bucket (SAE): 0.62 m3 (0.81 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Blade and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1850* 1850*
(25') (4050) (4050)
6.0 m 1550* 1550 2850* 2850*
(20') (3400) (3400) (6250) (6250)
4.5 m 1400* 1400* 3400* 3400* 3600* 3600*
(15') (3050) (3050) (7450) (7450) (7900) (7900)
3.0 m 1400* 1400* 3850* 3850* 4650* 4650* 6700* 6700*
(10') (3050) (3050) (8450) (8450) (10200) (10200) (14750) (14750)
1.5 m 1500* 1500* 4400* 4250 5850* 5850* 6600* 6600*
(5') (3300) (3300) (9650) (9350) (12850) (12850) (14500) (14500)
0.0 m 1700* 1700* 4800* 4800* 6650* 6650* 5650* 5650*
(0') (3750) (3750) (10550) (10550) (14600) (14600) (12400) (12400)
–1.5 m 2050* 2050* 4800* 4050 6750* 6650 8200* 8200* 3950* 3950*
(–5') (4500) (4500) (10550) (8900) (14850) (14600) (18050) (18050) (8700) (8700)
–3.0 m 2850* 2850* 3700* 3700* 6050* 6050* 9050* 9050*
(–10') (6250) (6250) (8150) (8150) (13300) (13300) (19900) (19900)
Front and rear outrigger above ground Arm length 2600 mm (8'6")
7.5 m 1850* 1850*
(25') (4050) (4300)
6.0 m 1550* 1550* 2850* 2850*
(20') (3400) (3400) (6250) (6250)
4.5 m 1400* 1400* 3400* 3400* 3600* 3600*
(15') (3050) (3050) (7450) (7450) (7900) (7900)
3.0 m 1400* 1400* 3850* 3550 4650* 4650* 6700* 6700*
(10') (3050) (3050) (8450) (7800) (10200) (10200) (14750) (14750)
1.5 m 1500* 1500* 4400* 3400 5500 5850* 6600* 6600*
(5') (3300) (3300) (9650) (7450) (12100) (12850) (14500) (14500)
0.0 m 1700* 1700* 4800* 3300 5250 6650* 5650* 5650*
(0') (3750) (3750) (10550) (7250) (11550) (14600) (12400) (12400)
–1.5 m 2050* 2050* 4800* 3250 5150 6550 8200* 8200* 3950* 3950*
(–5') (4500) (4500) (10550) (7150) (11300) (14400) (18050) (18050) (8700) (8700)
–3.0 m 2850* 2850* 3700* 3300 5200 6050* 9050* 9050*
(–10') (6250) (6250) (8150) (7250) (11450) (13300) (19900) (19900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-37
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (One piece boom)
Conditions: Boom: 5300 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
3.0 m *1600 1150 2050 1350 3000 2050 4750 3250 9500 6050
0.0 m 1750 1150 1900 1250 2750 1800 4250 2750 *4400 *4400
0.0 m *1450 900 1850 1200 2650 1750 4150 2700 *4050 *4050
–1.5 m 1650 1000 1800 1150 2600 1650 4050 2600 *5950 4800
2F-38
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (One piece boom)
Conditions: Boom: 5300 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
3.0 m *1600 1450 *3300 1650 *4900 2450 *6400 3900 *10,050 7350
0.0 m *1950 1400 3950 1550 *5400 2200 *7550 3400 *4400 *4400
0.0 m *1450 1200 3850 1500 *5300 2150 *7400 3300 *4050 *4050
–1.5 m *1700 1300 *3700 1450 *5100 2050 *7100 3200 *5950 *5950
2F-39
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (One piece boom)
Conditions: Boom: 5300 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
3.0 m *1600 *1600 *3300 2550 *4900 3700 *6400 5900 *10050 *10050
0.0 m *1950 *1950 *4050 2450 *5400 3450 *7550 5350 *4400 *4400
0.0 m *1450 *1450 *4050 2350 *5300 3350 *7400 5250 *4050 *4050
–1.5 m *1700 *1700 *3700 2350 *5100 3300 *7100 5150 *5950 *5950
2F-40
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (One piece boom)
Conditions: Boom: 5300 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
3.0 m *1600 *1600 *3300 *3050 *4900 4400 *6400 *6400 *10050 *10050
0.0 m *1950 *1950 *4050 2950 *5400 4150 *7550 6550 *4400 *4400
0.0 m *1450 *1450 *4050 2850 *5300 4100 *7400 6450 *4050 *4050
–1.5 m *1700 *1700 *3700 2850 *5100 4000 *7100 6350 *5950 *5950
2F-41
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (Two piece boom)
Conditions: Boom: 5223 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
4.5 m *1400 1200 *1750 1250 3000 2050 *4000 3450 *3500 *3500
0.0 m *1650 1050 1800 1150 2650 1700 4150 2650 *4050 *4050
0.0 m *1300 900 1800 1150 2650 1700 4200 2700 *4250 *4250
–1.5 m *1550 1000 1800 1100 2550 1650 4050 2550 *6250 4950
2F-42
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (Two piece boom)
Conditions: Boom: 5223 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
0.0 m *1650 1200 *3850 1300 *5700 1900 *8000 3000 *4050 *4050
0.0 m *1300 1050 *4350 1300 *5650 1900 *7900 3000 *4250 *4250
–1.5 m *1550 1150 *3700 1250 *5550 1850 *7750 2900 *6250 5500
2F-43
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (Two piece boom)
Conditions: Boom: 5223 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
4.5 m *1400 *1400 *1750 *1750 *3850 3750 *4000 4000 *3500 *3500
0.0 m *1650 *1300 *3850 2350 *5700 3350 *8000 5250 *4050 *4050
0.0 m *1300 *1300 *4350 2350 *5650 3350 *7900 5300 *4250 *4250
–1.5 m *1550 *1550 *3700 2300 *5550 3300 *7750 5150 *6250 *6250
2F-44
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW160-7 (Two piece boom)
Conditions: Boom: 5223 mm, Bucket (SAE): 0.62 m3, Tires:10.00-20-14PR unit: kg
4.5 m *1400 *1400 *1750 *1750 *3850 *3850 *4000 *4000 *3500 *3500
0.0 m *1650 *1650 *3850 2850 *5700 4050 *8000 6500 *4050 *4050
0.0 m *1300 *1300 *4350 2850 5650 4100 *7900 6500 *4250 *4250
–1.5 m *1550 *1550 *3700 2800 *5550 4000 *7750 6400 *6250 *6250
2F-45
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket(SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3450* 4350* 4350* 5000* 5000*
(15') (7600) (7600) (9600) (9600) (11000) (11000)
3.0 m 3500* 3450 4750* 4750* 6100* 6100*
(10') (7700) (7600) (10400) (10400) (13400) (13400)
1.5 m 3750* 3300 5250* 4600 7150* 7150*
(5') (8200) (7200) (11500) (10100) (15700) (15700)
0.0 m 4250 3400 5500* 4500 7600* 7200
(0') (9300) (7500) (12100) (9900) (16700) (15800)
–1.5 m 4550* 3850 5300* 4450 7350* 7150 9450* 9450*
(–5') (10000) (8500) (11600) (9800) (16200) (15700) (20800) (20800)
–3.0 m 4450* 4450* 6200* 6200* 8700* 8700*
(–10') (9800) (9800) (13600) (13600) (19100) (19100)
Blade above ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 2700
(20') (8000) (5900)
4.5 m 3450* 2050 4350* 2650 5000* 4400
(15') (7600) (4500) (9600) (5800) (11000) (9700)
3.0 m 3500* 1750 4750* 2500 6100* 4000
(10') (7700) (5800) (10400) (5500) (13400) (8800)
1.5 m 3750* 1650 5250* 2350 7150* 3650
(5') (8200) (3600) (11500) (5200) (15700) (8000)
0.0 m 4050 1700 5400 2250 7800* 3450
(0') (8900) (3700) (11900) (4900) (17100) (7600)
–1.5 m 4550* 1950 5300* 2250 7350* 3400 9450* 6550
(–5') (10000) (4300) (11600) (4900) (16200) (7500) (20800) (14400)
–3.0 m 4450 2550 6200* 3550 8700* 6800
(–10') (9800) (5600) (13600) (7800) (19100) (14900)
Front outrigger on ground and rear blade above ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3200 4350* 4050* 5000* 5000*
(15') (7600) (7000) (9600) (8900) (11000) (11000)
3.0 m 3500* 2800 4750* 3900 6100* 6100*
(10') (7700) (6100) (10400) (8600) (13400) (13400)
1.5 m 3750* 2650 5250* 3750 7150* 5850
(5') (8200) (5800) (11500) (8200) (15700) (12900)
0.0 m 4250* 2750 5500* 3600 7600* 5650
(0') (9300) (6000) (12100) (7900) (16700) (12400)
–1.5 m 4550* 3100 5300* 3600 7350* 5600 9450* 9450*
(–5') (10000) (6800) (11600) (7900) (16200) (12300) (20800) (20800)
–3.0 m 4450* 4050 6200* 5700 8700* 8700*
(–10') (9800) (8900) (13600) (12500) (19100) (19100)
Front and rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4300* 4300*
(25') (9400) (9400)
6.0 m 3650* 3650*
(20') (8000) (8000)
4.5 m 3450* 3450* 4350* 4350* 5000* 5000*
(15') (7600) (7600) (9600) (9600) (11000) (11000)
3.0 m 3500* 3500* 4750* 4750* 6100* 6100*
(10') (7700) (7700) (10400) (10400) (13400) (13400)
1.5 m 3750* 3450 5250* 4850 7150* 7150*
(5') (8200) (7600) (11500) (10700) (15700) (15700)
0.0 m 4250* 3600* 5500* 4750 7600* 7600*
(0') (9300) (7900) (12100) (10400) (16700) (16700)
–1.5 m 4550* 4050 5300* 4700 7350* 7350* 9450* 9450*
(–5') (10000) (8900) (11600) (10300) (16200) (16200) (20800) (20800)
–3.0 m 4450* 4450* 8200* 8200* 8700* 8700*
(–10') (9800) (9800) (18000) (18000) (19100) (19100)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-46
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'11"), Bucket(SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 6.0 m (20') 4.5 m (15') 3.0 m (10') 1.5 m (5')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4700* 4600* 4600*
(20') (7800) (7800) (10300) (10300) (10100) (10100)
4.5 m 3350* 3350* 4950* 4950* 5500* 5500*
(15') (7400) (7400) (10900) (10900) (12100) (12100)
3.0 m 3300* 3300* 5450* 4800 7050* 7050*
(10') (7300) (7300) (12000) (10600) (15500) (15500)
1.5 m 3500* 3250 5800 4650 8550* 7450
(5') (7700) (7100) (12800) (10200) (18800) (16400)
0.0 m 3850* 3400 5700 4550 9400* 7300
(0') (8500) (7500) (12500) (10000) (20700) (16100)
–1.5 m 4600* 3900 5700 4500 9450* 7250 9050* 9050*
(–5') (10100) (8600) (12500) (9900) (20800) (15900) (19900) (19900)
–3.0 m
(–10')
Blade above ground Arm length 1800 mm (5'11")
7.5 m 4250* 3850 4850* 4450
(25') (9300) (8500 (10700) (9800)
6.0 m 3550* 2450* 4700* 2650 4600* 4500
(20') (7800) (5400) (10300) (5800) (10100) (9900)
4.5 m 3350* 1950 4950* 2600 5500* 4300
(15') (9400) (4300) (10900) (5700) (12100) (9500)
3.0 m 3300* 1700 5450* 2500 7050* 3950
(10') (7300) (3700) (12000) (5500) (15500) (8700)
1.5 m 3500* 1650 5550 2350 8550* 3650
(5') (7700) (3600) (12200) (5200) (18800) (8000)
0.0 m 3850* 1700 5450 2300 9050 3500
(0') (8500) (3700) (12200) (5100) (19900) (7700)
–1.5 m 4600* 1950 5450 2250 9050 3500 9050* 6750
(–5') (10100) (4300) (12200) (4900) (19900) (7700) (19900) (14800)
–3.0 m
(–10')
Front outrigger on ground and rear blade above ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4050 4600* 4600*
(20') (7800) (7800) (10300) (8900) (10100) (10100)
4.5 m 3350* 3050* 4950* 4000 5500* 5500*
(15') (7400) (6700) (10900) (8800) (12100) (12100)
3.0 m 3300* 2700* 5450* 3900 7050* 6250
(10') (7300) (5900) (12000) (8600) (15500) (13700)
1.5 m 3500* 2600* 5950* 3750 8550* 5850
(5') (7700) (5700) (13100) (8200) (18800) (12900)
0.0 m 3850* 2750 6550* 3650 9400* 5700
(0') (8500) (6000) (14400) (8000) (20700) (12500)
–1.5 m 4600* 3150 6850* 3650 9450* 5700 9050* 9050*
(–5') (10100) (6900) (15100) (8000) (20800) (12500) (19900) (19900)
–3.0 m 8750* 5700
(–10') (19200) (12500)
Front and rear outrigger on ground Arm length 1800 mm (5'11")
7.5 m 4250* 4250* 4850* 4850*
(25') (9300) (9300) (10700) (10700)
6.0 m 3550* 3550* 4700* 4700* 4600* 4600*
(20') (7800) (7800) (10300) (10300) (10100) (10100)
4.5 m 3350* 3350* 4950* 4950* 5500* 5500*
(15') (7400) (7400) (10900) (10900) (12100) (12100)
3.0 m 3300* 3300* 5450* 5050 7050* 7050*
(10') (7300) (7300) (12000) (11100) (15500) (15500)
1.5 m 3500* 3400 5950* 4900 8550* 7850
(5') (7700) (7500) (13100) (10800) (18800) (17300)
0.0 m 3850* 3600 6550* 4800 9400* 7650
(0') (8500) (7900) (14400) (10600) (20700) (16800)
–1.5 m 2800* 2800 6850* 4800 9450* 7650 9050* 9050*
(–5') (6200) (6200) (15100) (10500) (20800) (16800) (19900) (19900)
–3.0 m
(–10')
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-47
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7000) (7000)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 3900 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5610) (5610) (9800) (8600) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 2550* 5000* 3700 6800* 5850
(5') (5100) (5100) (7700) (5600) (11000) (8100) (15000) (12900)
0.0 m 2650* 2500 2700* 2500 5350* 3550 7450* 5600 5700* 5700*
(0') (5800) (5500) (5900) (5500) (11800) (7800) (16400) (12300) (12500) (12500)
–1.5 m 3250* 2750 5300* 3500 7400* 5500 9350* 9350*
(–5') (7100) (6050) (11700) (7700) (16300) (12100) (20600) (20600)
–3.0 m 4350* 3500 4450* 3550 6550* 5550 9400* 9400*
(–10') (9600) (7700) (9800) (7800) (14400) (12200) (20700) (20700)
Front and rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7000) (7000)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 4450* 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5610) (5610) (9800) (9800) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 3300 5000* 4850 6800* 6800
(5') (5100) (5100) (7700) (7300) (11000) (10700) (15000) (15000)
0.0 m 2650* 2650* 2700* 2700* 5350* 4700 7450* 7450* 5700* 5700*
(0') (5800) (5800) (5900) (5900) (11800) (10300) (16400) (16400) (12500) (12500)
–1.5 m 3250* 3250* 5300* 4600 7400* 7400* 9350* 9350*
(–5') (7100) (7100) (11700) (10100) (16300) (16300) (20600) (20600)
–3.0 m 4350* 4350* 4450* 4450* 6550* 6550* 9400* 9400*
(–10') (9600) (9600) (9800) (9800) (14400) (14400) (20700) (20700)
Rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 3200*
(20') (4600) (4600) (7040) (7040)
4.5 m 2050* 2050* 4000* 4000* 4500* 4500*
(15') (4500) (4500) (8800) (8800) (9900) (9900)
3.0 m 2100* 2100* 2550* 2550* 4450* 4450* 5650* 5650* 8750* 8750*
(10') (4600) (4600) (5600) (5600) (9800) (9800) (12400) (12400) (19200) (19200)
1.5 m 2300* 2300* 3500* 3150 5100* 4800 6800* 6800*
(5') (5100) (5100) (7700) (6900) (11200) (10600) (15000) (15000)
0.0 m 2650* 2650* 2700* 2700* 5350* 4450 7450* 7150 5700* 5700*
(0') (5800) (5800) (5900) (5900) (11800) (9800) (16400) (15700) (12500) (12500)
–1.5 m 3250* 3250* 5300* 4350 7400* 7050 9350* 9350*
(–5') (7100) (7100) (11700) (9600) (16300) (15500) (20800) (20800)
–3.0 m 4350* 4350* 4450* 4450 6550* 6550* 9400* 9400*
(–10') (9600) (9600) (9800) (9800) (14400) (14400) (20700) (20700)
Blade above ground Arm length 2250 mm (7'5")
7.5 m 2400* 2400*
(25') (5300) (5300)
6.0 m 2100* 2100* 3200* 2700
(20') (4600) (4600) (7040) (5900)
4.5 m 2050* 1850 4000* 2650 4500* 4450
(15') (4500) (4100) (8800) (5830) (9900) (9800)
3.0 m 2100* 1550 2550* 1600 4450* 2500 5650* 4050 8750* 7750
(10') (4600) (3400) (5600) (3500) (9800) (5500) (12400) (8900) (19200) (17000)
1.5 m 2300* 1450 3500* 1550 5000* 2300 6800* 3650
(5') (5100) (3200) (7700) (3400) (11000) (5100) (15000) (8000)
0.0 m 2650* 1500 2700* 1500 5350 2200 7450* 3400 5700* 5700*
(0') (5800) (3300) (5900) (3300) (11800) (4800) (16400) (7500) (12500) (12500)
–1.5 m 3250* 1700 5300 2150 7400* 3350 9350* 6400
(–5') (7100) (3700) (11700) (4700) (16300) (7400) (20800) (14100)
–3.0 m 4350* 2150 4450* 2200 6550* 3400 9400* 6600
(–10') (9600) (4700) (9800) (4800) (14400) (7500) (20700) (14500)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-48
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900 1900* 3250* 3200 5200* 4750 6500* 6500*
(10') (4200) (4200) (7100) (7000) (11400) (10400) (14300) (14300)
1.5 m 2050* 2050* 3950 3150 5700* 4600 8100* 7450
(5') (4500) (4500) (8700) (6900) (12500) (10100) (17800) (16400)
0.0 m 2300* 2300* 3050* 3050* 5650 4450 9100 7200 5150* 5150*
(0') (5100) (5100) (6700) (6700) (12400) (9800) (20000) (15800) (11300) (11300)
–1.5 m 2800* 2800* 5600 4450 9350 7150 9100* 9100*
(–5') (6200) (6200) (12300) (9800) (20600) (15700) (20000) (20000)
–3.0 m 8750* 7250
(–10') (19200) (15900)
Blade above ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 2650
(20') (4300) (4300) (8400) (5800)
4.5 m 1900* 1700 4500* 2800 4950* 4350
(15') (4200) (3700) (9900) (6200) (10900) (9600)
3.0 m 1900 1500 3250* 1600 5200* 2450 6500* 4000
(10') (4200) (3300) (7100) (3500) (11400) (5400) (14300) (8800)
1.5 m 2050* 1450 3750 1550 5550 2300 8100* 3650
(5') (4500) (3200) (8700) (3400) (12200) (5100) (17800) (8000)
0.0 m 2300* 1500 3050* 1500 5400 2200 9000 3450 5150* 5150*
(0') (5100) (3300) (6700) (3300) (11900) (4800) (19800) (7600) (11300) (11300)
–1.5 m 2800* 1700 5350 2200 8950 3400 9100* 6550
(–5') (6200) (3700) (11800) (4800) (19700) (7500) (20000) (14400)
–3.0 m 8750* 3500
(–10') (19200) (7700)
Front outrigger on ground and rear blade above ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900* 1900* 3250* 2600 5200* 3850 6500* 6250
(10') (4200) (4200) (7100) (5700) (11400) (8500) (14300) (13700)
1.5 m 2050* 2050* 4050* 2550 5700* 3700 8100* 5850
(5') (4500) (4500) (8900) (5600) (12500) (8100) (17800) (12900)
0.0 m 2300* 2300* 3050* 2500 6250* 3550 9100* 5650 5150* 5150*
(0') (5100) (5100) (6700) (5500) (13700) (7800) (20000) (12400) (11300) (11300)
–1.5 m 2800* 2800 6800* 3550 9400* 5600 9100* 9100*
(–5') (6200) (6200) (15000) (7800) (20700) (12300) (20000) (20000)
–3.0 m 8750* 5700
(–10') (19200) (12500)
Front and rear outrigger on ground Arm length 2250 mm (7'5")
7.5 m 2300* 2300*
(25') (5100) (5100)
6.0 m 1950* 1950* 3800* 3800*
(20') (4300) (4300) (8400) (8400)
4.5 m 1900* 1900* 4500* 4500* 4950* 4950*
(15') (4200) (4200) (9900) (9900) (10900) (10900)
3.0 m 1900* 1900* 3250* 3250* 5200* 5000 6500* 6500
(10') (4200) (4200) (7100) (7100) (11400) (11000) (14300) (14300)
1.5 m 2050* 2050* 4050* 3350 5700* 4850 8100* 7850
(5') (4500) (4500) (8900) (7370) (12500) (10700) (17800) (17300)
0.0 m 2300* 2300* 3050* 3050* 6250* 4700 9100* 7850 5150* 5150*
(0') (5100) (5100) (6700) (6700) (13700) (10300) (20000) (17300) (11300) (11300)
–1.5 m 2800* 2800 6800* 4700 9400* 7550 9100* 9100*
(–5') (6200) (6200) (15000) (10300) (20700) (16600) (20000) (20000)
–3.0 m 8750* 7850
(–10') (19200) (17300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-49
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (One piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires:10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 3100* 4250* 4250* 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (6800) (9300) (9300) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 3150 4850* 4600 6450* 6450* 6750* 6750*
(5') (4200) (4200) (8700) (6900) (10700) (10100) (14200) (14200) (14800) (14800)
0.0 m 2200* 2200* 3850 3050 5250* 4450 7300* 7200 6400* 6400*
(0') (4800) (4800) (8500) (6700) (11500) (9800) (16100) (15800) (14100) (14100)
–1.5 m 2750* 2750* 5350* 4350 7450* 7050 9100* 9100*
(–5') (6000) (6000) (11800) (9600) (16400) (15500) (20000) (20000)
–3.0 m 3900* 3900* 4800* 4400 6800* 6800* 9950* 9950*
(–10') (8600) (8600) (10600) (9700) (15000) (15000) (21900) (21900)
Blade above ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 2700
(20') (3700) (3700) (6900) (5900)
4.5 m 1650* 1650* 3700* 2650
(15') (3600) (3600) (8100) (5800)
3.0 m 1700* 1450 3100* 1600 4250* 2500 5300* 4150 7750* 7750*
(10') (3700) (3200) (6800) (3500) (9300) (5500) (11700) (9100) (17000) (17000)
1.5 m 1900* 1350 3750 1550 4850* 2350 6450* 3650 6750* 6750*
(5') (4200) (3000) (8200) (3400) (10700) (5200) (14200) (8000) (14800) (14800)
0.0 m 2200* 1400 3700 1500 5250* 2200 7300* 3450 6400* 6400*
(0') (4800) (3100) (8100) (3300) (11500) (4800) (16100) (7600) (14100) (14100)
–1.5 m 2750* 1550 5250 2100 7450* 3300 9100* 6350
(–5') (6000) (3400) (11500) (4600) (16400) (7300) (20000) (14000)
–3.0 m 3900* 1950 4800* 2150 6800* 3350 9500* 6500
(–10') (8600) (4300) (10600) (4700) (15000) (7400) (21000) (14300)
Front outrigger on ground and rear blade above ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 2600 4250* 3900 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (5700) (9300) (8600) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 2550 4850* 3700 6450* 5850 6750* 6750*
(5') (4200) (4200) (8700) (5600) (10700) (8100) (14200) (12900) (14800) (14800)
0.0 m 2200* 2200* 3900* 2450 5250* 3550 7300* 5600 6400* 6400*
(0') (4800) (4800) (8600) (5400) (11500) (7800) (16100) (12300) (14100) (14100)
–1.5 m 2750* 2550 5350* 3450 7450* 5500 9100* 9100*
(–5') (6000) (5600) (11800) (7600) (16400) (12100) (20000) (20000)
–3.0 m 3900* 3150 4800* 3500 6800* 5500 9950* 9950*
(–10') (8600) (6900) (10600) (7700) (15000) (12100) (21900) (21900)
Front and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1900* 1900*
(25') (4200) (4200)
6.0 m 1700* 1700* 3150* 3150*
(20') (3700) (3700) (6900) (6900)
4.5 m 1650* 1650* 3700* 3700*
(15') (3600) (3600) (8100) (8100)
3.0 m 1700* 1700* 3100* 3100* 4250* 4250* 5300* 5300* 7750* 7750*
(10') (3700) (3700) (6800) (6800) (9350) (9350) (11700) (11700) (17000) (17000)
1.5 m 1900* 1900* 3950* 3300 4850* 4850* 6450* 6450* 6750* 6750*
(5') (4200) (4200) (8700) (7300) (10700) (10700) (14200) (14200) (14800) (14800)
0.0 m 2200* 2200* 3900* 3250 5250* 4700 7300* 7300* 6400* 6400*
(0') (4800) (4800) (8600) (7100) (11500) (10300) (16100) (16100) (14100) (14100)
–1.5 m 2750* 2750* 5350* 4600 7450* 7450* 9100* 9100*
(–5') (6000) (6000) (11800) (10100) (16400) (16400) (20000) (20000)
–3.0 m 3900* 3900* 4850* 4650 6800* 6800* 9500* 9500*
(–10') (8600) (8600) (10700) (10200) (15000) (15000) (21900) (21900)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-50
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions: Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4050 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (8900) (9800) (9800)
3.0 m 1550* 1550* 3500* 2600 4900* 3900 6000* 6000 9100* 9100*
(10') (3400) (3400) (7700) (5700) (10800) (8600) (13200) (13200) (20000) (20000)
1.5 m 1650* 1650* 4250* 2550 5500* 3700 7700* 5900
(5') (3600) (3600) (9300) (5600) (12100) (8100) (16900) (13000)
0.0 m 1900* 1900* 4250* 2540 6100* 3550 8900* 5650
(0') (4200) (4200) (9300) (5600) (13400) (7800) (19600) (12400)
–1.5 m 2350* 2350* 6650* 3500 9350* 5550 8800* 8800*
(–5') (5200) (5200) (14600) (7700) (20600) (12200) (19400) (19400)
–3.0 m 6400* 3550 9000* 5600 13450* 11850
(–10') (14100) (7800) (19800) (12300) (29600) (26100)
Front and rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4150* 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (9100) (9800) (9800)
3.0 m 1550* 1550* 3500* 3400 4900* 4900* 6000* 6000* 9100* 9100*
(10') (3400) (3400) (7700) (7500) (10800) (10800) (13200) (13200) (20000) (20000)
1.5 m 1850* 1850* 4250* 3300 5500* 4850 7700* 7700*
(5') (4100) (4100) (9300) (7300) (12100) (10700) (16900) (16900)
0.0 m 1900* 1900* 4250* 3250 6100* 4700 8900* 7600 5750* 5750*
(0') (4200) (4200) (9300) (7100) (13400) (10300) (19600) (16700) (12600) (12600)
–1.5 m 2350* 2350* 6650* 4650 9350* 7500 8800* 8800*
(–5') (5200) (5200) (14600) (10200) (20600) (16500) (19400) (19400)
–3.0 m 6400* 4700 9000* 7600 13450* 13450*
(–10') (14100) (10300) (19800) (16700) (29600) (29600)
Rear outrigger on ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 3500*
(20') (3400) (3400) (7700) (7700)
4.5 m 1500* 1500* 2250* 2250* 4150* 4150* 4450* 4450*
(15') (3300) (3300) (4900) (4900) (9100) (9100) (9800) (9800)
3.0 m 1550* 1550* 3500* 3200 4900* 4800 6800* 6000 9100* 9100*
(10') (3400) (3400) (7700) (7040) (10800) (10600) (15000) (13200) (20000) (20000)
1.5 m 1650* 1650* 3950 3150 5500* 4600 7700* 7500
(5') (3600) (3600) (8700) (6900) (12100) (10100) (16900) (16500)
0.0 m 1900* 1900* 3900 3100 3650 4450 8900* 7200 5750* 5750*
(0') (4200) (4200) (8600) (6800) (8000) (9800) (19600) (15800) (12600) (12600)
–1.5 m 2350* 2350* 5550 4400 9300 7100 8800* 8800*
(–5') (5200) (5200) (12200) (9700) (20500) (15600) (19400) (19400)
–3.0 m 5650 4450 9000* 7200 13450* 13450*
(–10') (12400) (9800) (19800) (15800) (29600) (29600)
Blade above ground Arm length 2600 mm (8'6")
7.5 m 1800* 1800*
(25') (4000) (4000)
6.0 m 1550* 1550* 3500* 2700
(20') (3400) (3400) (7700) (5900)
4.5 m 1500* 1500* 2250* 1650 4150* 2650 4450* 4400
(15') (3300) (3300) (4900) (3600) (9100) (5800) (9800) (9700)
3.0 m 1550* 1350 3500* 1600 4900* 2500 6000* 4050 9100* 7850
(10') (3400) (3000) (7700) (3500) (10800) (5500) (13200) (8900) (20000) (17300)
1.5 m 1650* 1300 3750 1550 5500* 2300 7700* 3650
(5') (3600) (2900) (8200) (3400) (12100) (5000) (16900) (8000)
0.0 m 1900* 1350 3700 1500 5400 2200 8900* 3450 5750* 5750*
(0') (4200) (3000) (8100) (3300) (11900) (4800) (19600) (7600) (12600) (12600)
–1.5 m 2350* 1550 5300 2150 8900 3350 8800* 6500
(–5') (5200) (3400) (11700) (4700) (19600) (7400) (19400) (14300)
–3.0 m 5400 2200 8950 3400 13450* 6700
(–10') (11900) (4800) (19700) (7500) (29600) (14700)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-51
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW170ES-6 (Two piece boom)
Conditions:Boom: 5200 mm (17'1"), Bucket (SAE): 0.76 m3 (0.99 cu.yd), Tires: 10.00-20-16PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Front outrigger on ground and rear blade above ground with rotating arm
7.5 m 1350* 1350*
(25') (3000) (3000)
6.0 m 1200* 1200* 2800* 2800*
(20') (2600) (2600) (6200) (6200)
4.5 m 1150* 1150* 1650* 1650* 3600* 3600*
(15') (2500) (2500) (3600) (3600) (7900) (7900)
3.0 m 1200* 1200* 2750* 2350 4300* 3600 5200* 5200* 7650* 7650*
(10') (2600) (2600) (6000) (5200) (9500) (7900) (11400) (11400) (16800) (16800)
1.5 m 1350* 1350* 3450* 2250 4950* 3300 6850* 5400 9100* 9100*
(5') (3000) (3000) (7600) (4900) (10900) (7300) (15100) (11900) (20000) (20000)
0.0 m 1600* 1600* 3400* 2150 5450* 3100 8050* 5000 7800* 7800*
(0') (3500) (3500) (7500) (4700) (12000) (6800) (17800) (11000) (17200) (17200)
–1.5 m 2100* 2100* 6000* 3050 8650* 4850 9950* 9950*
(–5') (4600) (4600) (13200) (6700) (19000) (10700) (21900) (21900)
–3.0 m 3250* 2800 6650* 3100 8450* 4950 12850* 10650*
(–10') (7100) (6200) (14600) (6800) (18600) (10900) (28300) (23400)
Front and rear outrigger on ground with rotating arm
7.5 m 1350* 1350*
(25') (3000) (3000)
6.0 m 1200* 1200* 2800* 2800*
(20') (2600) (2600) (6200) (6200)
4.5 m 1150* 1150* 1650* 1650* 3600* 3600*
(15') (2500) (2500) (3600) (3600) (7900) (7900)
3.0 m 1200* 1200* 2750* 2750* 4300* 4300* 5200* 5200* 7650* 7650*
(10') (2600) (2600) (6000) (6000) (9500) (9500) (11400) (11400) (16800) (16800)
1.5 m 1350* 1350* 3450* 3050 4950* 4450 6850* 6850* 9100* 9100*
(5') (3000) (3000) (7600) (6700) (10900) (9800) (15100) (15100) (20000) (20000)
0.0 m 1600* 1600* 3400* 2950 5450* 4250 8050* 6950 7800* 7800*
(0') (3500) (3500) (7500) (6500) (12000) (9300) (17800) (15300) (17200) (17200)
–1.5 m 2100* 2100* 6000* 4150 8650* 6800 9950* 9950*
(–5') (4600) (4600) (13200) (9100) (19000) (15000) (21900) (21900)
–3.0 m 3250* 3250* 6050* 4250 8450 8900 12850* 12850*
(–10') (7100) (7100) (13300) (9300) (18600) (19600) (28300) (28300)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-52
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (One piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2250 mm Without stabilizer
7.5 m *2700 *2700
0.0 m 1900 1200 2000 1300 2850 1900 4450 2900 *4600 *4600
-4.5 m
Arm length 2250 mm With blade
7.5 m *2700 *2700
0.0 m *3050 1500 4100 1600 5900 2300 *8650 3300 *4600 *4600
-4.5 m
Arm length 2250 mm With blade + outrigger
7.5 m *2700 *2700
0.0 m *3050 2500 4700 2650 *6300 3500 *8600 5350 *4600 *4600
-4.5 m
Arm length 2250 mm Outriggers front + rear
7.5 m *2700 *2700
0.0 m *3050 *3050 *4700 3300 *6300 4450 *8600 6900 *4600 *4600
-4.5 m
2F-53
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (One piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2600 mm Without stabilizer
7.5 m *2200 *2200
3.0 m 1800 1200 2200 1450 3250 2250 5250 3600 10450 6700
0.0 m 1750 1100 2000 1300 2900 1900 4450 2900 *5300 5300
-1.5 m 1950 1250 2000 1250 2800 1800 4350 2800 *8350 5300 *5150 *5150
3.0 m *2050 1450 4300 1750 *5800 2650 *7500 4150 *12100 8000
0.0 m *2600 1400 4100 1600 5950 2300 *8700 3300 *5300 *5300
-1.5 m *3200 1550 4050 1550 5850 2200 *8000 3300 *8350 6500 *5150 *5150
3.0 m *2050 *2050 *4450 2800 *5750 4150 *7500 6650 *12100 *12100
0.0 m *2600 2300 4700 2650 *6350 3650 *8600 5400 *5300 *5300
-1.5 m *3200 2550 *4050 2600 *5900 3600 *8100 5350 *8350 *8350 *5150 *5150
3.0 m *2050 *2050 *4450 3500 *5750 5100 *7500 *7600 *12100 *12100
0.0 m *2600 *2600 *4800 3300 *6350 4450 *8600 6900 *5300 *5300
-1.5 m *3200 3200 *4050 3300 *5900 4550 *8100 6850 *8350 *8350 *5150 *5150
2F-54
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (One piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm Without stabilizer
7.5 m *1900 *1900 *2550 *2500
3.0 m 1650 1050 2150 1450 3250 2250 5300 3650 10700 6950
0.0 m 1600 1000 1950 1250 2850 1850 4450 2850 *5500 5250
-1.5 m 1750 1100 1900 1200 2750 1750 4300 2750 *8000 5200 *4800 *4800
-3.0 m 2150 1350 2750 1750 4300 2750 8800 5350 *7650 *7650
3.0 m *1800 1300 4300 1750 *5550 2650 *7150 4200 *11250 8250
0.0 m *2200 1250 4050 1550 5900 2250 *8650 3300 *5550 *5550
-1.5 m *2700 1400 4000 1500 5800 2150 *8150 3200 *8000 6400 *4800 *4800
-3.0 m *3600 1700 *4950 2150 *6850 3400 *9450 6550 *7650 *7650
3.0 m *1800 *1800 4300 2800 *5500 4150 *7200 6700 *11250 *11250
0.0 m *2200 2150 4650 2600 *6300 3500 *8550 5350 *5550 *5550
-1.5 m *2700 2350 *4350 2550 *6000 3550 *8250 5300 *8000 *8000 *4800 *4800
-3.0 m *3600 2850 *4950 3600 *6850 5650 *9450 *9450 *7650 *7650
3.0 m *1800 *1800 *4300 3500 *5500 5100 *7200 *7250 *11250 *11250
0.0 m *2200 *2200 *4800 3250 *6300 4400 *8600 6900 *5550 *5550
-1.5 m *2700 *2700 *4350 3200 *6000 4500 *8250 6800 *8000 *8000 *4800 *4800
-3.0 m *3600 3550 *4950 4550 *6850 *6850 *9450 *9450 *7650 *7650
2F-55
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (Two piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2250 mm Without stabilizer
7.5 m *2950 *2950 *4800 4750
-3.0 m
-4.5 m
Arm length 2250 mm With blade
7.5 m *2950 *2950 *4800 *4800
-3.0 m
-4.5 m
Arm length 2250 mm With blade + outrigger
7.5 m *2950 *2950 *4800 *4800
-3.0 m
-4.5 m
Arm length 2250 mm Outriggers front + rear
7.5 m *2950 *2950 *4800 *4800
-3.0 m
-4.5 m
2F-56
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (Two piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2600 mm Without stabilizer
7.5 m *2400 *2400 *2550 *2550
-1.5 m 1950 1500 2050 1550 2850 2200 4450 3350 *7550 6450
-4.5 m
Arm length 2600 mm (8'6") With blade
7.5 m *2400 *2400 *2550 *2550
-1.5 m *2900 1800 4150 1850 5950 2600 *8525 4000 *7550 *7550
-4.5 m
Arm length 2600 mm (8'6") With blade + outrigger
7.5 m *2400 *2400 *2550 *2550
-1.5 m *2900 2800 *4250 2950 *6000 4100 *8250 5952 *7550 *7550
-4.5 m
Arm length 2600 mm (8'6") Outriggers front + rear
7.5 m *2400 *2400 *2550 *2550
-1.5 m *2900 *2900 *4250 3650 *6000 5100 *8250 7580 *7550 *7550
-4.5 m
2F-57
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW180-7 (Two piece boom)
Conditions: unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0m 1.5m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Arm length 2900 mm Without stabilizer
7.5 m *2050 *2050 *3050 2800
0.0 m 1600 1200 2000 1500 2900 2200 4500 3400 *4600 *4600
-1.5 m 1800 1350 1950 1450 2800 2100 4400 3300 *7200 6300
-4.5 m
Arm length 2900 mm With blade
7.5 m *2050 *2550 *3050 *3050
0.0 m *2100 1450 3611 1800 6000 2600 *8488 4050 *4600 *4600
-1.5 m *2450 1600 4100 1800 5900 2550 *8350 3950 *7200 *7200
-4.5 m
Arm length 2900 mm With blade + outrigger
7.5 m *2050 *2050 *3050 *3050
0.0 m *2100 *2100 4450 2842 *6250 3895 *8575 5934 *4600 *4600
-1.5 m *2450 *2450 *4400 2850 *6050 4050 *8350 5906 *7200 *7200
-4.5 m
Arm length 2900 mm Outriggers front + rear
7.5 m *2050 *2050 *3050 *3050
0.0 m *2100 *2100 *4800 3528 *6250 4893 *8575 7544 *4600 *4600
-1.5 m *2450 *2450 *4400 3550 *6050 5050 *8350 7533 *7200 *7200
-4.5 m
2F-58
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 1800 mm
7.5 m *5150 3300
6.0 m *3550 2150 4600 2900
4.5 m 2900 1700 2900 1700 4450 2750 7300 4500
3.0 m 2550 1450 2850 1650 4200 2500 6650 3900
1.5 m 2450 1350 2750 1550 3950 2300 6100 3450
0.0 m 2550 1400 2700 1500 3700 2050 5900 3300
–1.5 m 2850 1600 3700 2050 5950 3300 *8450 6400
–3.0 m *3500 2100 3900 2250 *5700 3450
Rear outrigger on ground Arm length 1800 mm
7.5 m *4800 4450
6.0 m *4450 3000 *7450 3850
4.5 m *4400 2400 *4450 2400 *7850 3700 *10150 6000 *15600 11800
3.0 m *4650 2150 5600 2350 *8250 3450 *11400 5400
1.5 m 4950 2000 5500 2250 8050 3200 *11500 4900
0.0 m 5100 2100 5400 2200 *7750 3000 *10350 4700
–1.5 m *4750 2350 *6500 3000 *8450 4750 *8400 *8400
–3.0 m *3600 3000 *4100 3200 *5700 4900
Front outrigger and rear blade on ground Arm length 1800 mm
7.5 m *4850 *4850
6.0 m *4500 4000 *7600 5050
4.5 m *4500 3250 *4500 3250 7800 4900 *10300 8000 *15800 *15800
3.0 m 4700 2900 5150 3200 7550 4650 *11550 7300
1.5 m 4550 2800 5050 3100 7200 4350 *11700 6750
0.0 m 4700 2850 4950 3050 6950 4150 *10550 6600
–1.5 m *4800 3200 *6600 4150 *8600 6600 *8550 *8550
–3.0 m *3700 *3700 *4200 *4200 *5800 *5800
Front and rear outrigger on ground Arm length 1800 mm
7.5 m *4800 *4800
6.0 m *4450 *4450 *7450 6200
4.5 m *4400 4000 *4450 4000 *7850 6050 *10150 10000 *15600 *15600
3.0 m *4650 3600 6200 3950 *8250 5750 *11400 9250
1.5 m *5100 3500 6050 3850 *8350 5450 *11500 8650
0.0 m *5350 3600 *5750 3800 *7750 5250 *10350 8450
–1.5 m *4750 4050 *6500 5250 *8450 *8450 *8400 *8400
–3.0 m *3600 *3600 *4100 *4100 *5700 *5700
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-59
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
2F-60
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2400 mm
7.5 m *4250 2700 4650 2950
6.0 m 3150 1900 4700 3000
4.5 m 2600 1500 3000 1800 4550 2850 7550 4700
3.0 m 2300 1300 2900 1700 4300 2600 6800 4050
1.5 m 2200 1200 2800 1600 4050 2350 6300 3650
0.0 m 2250 1250 2700 1500 3750 2100 6000 3350
–1.5 m 2500 1400 2650 1450 3650 2050 5950 3300 *9750 6300
–3.0 m *3050 1750 3800 2150 6050 3400 *8200 6550
Rear outrigger on ground Arm length 2400 mm
7.5 m *4250 3650 *5050 3900
6.0 m *4000 2600 *6800 3950
4.5 m *4050 2150 5800 2500 *7450 3800 *9450 6250
3.0 m *4200 1900 5650 2400 *8050 3550 *10850 5550
1.5 m 4450 1800 5500 2300 8200 3300 *11650 5100
0.0 m 4550 1850 5400 2200 7850 3050 *11050 4800
–1.5 m *4650 2050 *5150 2150 *7050 2950 *9500 4750 *9750 9350
–3.0 m *3950 2500 *5300 3100 *7100 4850 *8200 *8200
Front outrigger and rear blade on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 3500 *6900 5150
4.5 m *4100 2900 5300 3350 *7550 5000 *9600 8200
3.0 m 4200 2600 5200 3250 7650 4750 *11000 7450
1.5 m 4100 2500 5050 3100 7350 4450 *11850 7000
0.0 m 4200 2550 4950 3000 7000 4200 *11250 6700
–1.5 m 4650 2800 4900 3000 6900 4100 *9650 6600 *9900 *9900
–3.0 m *4000 3450 *5400 4250 *7200 6700 *8400 *8400
Front and rear outrigger on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 6300
4.5 m *4100 3600 5900 4100 *7550 6150 *9600 *9600
3.0 m *4300 3250 5800 4000 *8150 5850 *11000 9450
1.5 m 4550 3150 5650 3900 8250 5600 *11850 8900
0.0 m 4700 3200 5550 3800 7950 5300 *11250 8550
–1.5 m *4750 3550 *5250 3750 *7200 5200 *9650 8500 *9900 *9900
–3.0 m *4000 *4000 *5400 5350 *7200 *7200 *8400 *8400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-61
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
2F-62
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2900 mm
7.5 m *2650 2250 *4450 3050
6.0 m *2550 1600 3100 1850 4800 3050
4.5 m 2300 1300 3050 1850 4600 2900
3.0 m 2050 1100 2900 1700 4350 2650 7100 4300 14600 7950
1.5 m 1950 1050 2800 1600 4050 2400 6450 3750
0.0 m 2000 1050 2650 1500 3800 2150 6050 3400 *5950 *5950
–1.5 m 2200 1150 2600 1400 3600 1950 5900 3250 *9200 6200
–3.0 m 2600 1450 2650 1450 3650 2050 5950 3300 *10200 6400
Rear outrigger on ground Arm length 2900 mm
7.5 m *2650 *2650 *4450 4050
6.0 m *2550 2250 *3850 2550 *5300 4000
4.5 m *2550 1650 *5300 2550 *6600 3850
3.0 m *2650 1450 5700 2400 *7750 3600 *10350 5800 *16700 11200
1.5 m *2900 1400 5550 2300 8250 3350 *11450 5200
0.0 m *3250 1400 5400 2150 7900 3050 *11350 4850 *5950 *5950
–1.5 m *3900 1500 5300 2100 *7400 2900 *10150 4700 *9200 *9200
–3.0 m *3900 1800 *3950 2150 *5950 2950 *8050 4750 *10200 9400
Front outrigger and rear blade on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 3400 *5400 5250
4.5 m *2600 2550 5350 3350 *6700 5050
3.0 m *2700 2350 5200 3250 7700 4800 *10550 7750 *16950 15950
1.5 m *2950 2250 5050 3100 7400 4500 *11650 7100
0.0 m *3350 2300 4950 3000 7050 4200 *10550 6700 *6050 *6050
–1.5 m *4050 2500 4850 2950 6850 4050 *10350 6550 *9300 *9300
–3.0 m *5350 3150 *4000 2950 *6050 4100 *8200 6600 *10400 *10400
Front and rear outrigger on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4150 *6700 6200
3.0 m *2700 *2700 5800 4050 *7850 5950 *10550 9750 *16950 *16950
1.5 m *2950 2800 5650 3900 8300 5600 *11650 9050
0.0 m *3350 2900 5550 3750 8000 5300 *11550 8600 *6050 *6050
–1.5 m *4050 3150 5450 3700 *7550 5150 *10350 8450 *9300 *9300
–3.0 m *4000 3700 *4000 3750 *6050 5200 *8200 *8200 *10400 *10400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-63
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
2F-64
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 0.80 m3, Tires:10.00-20-14PR unit: kg
A MAX 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 3500 mm
7.5 m *2650 1850 *2700 1900
6.0 m 2400 1350 3150 1900
4.5 m 2000 1100 3100 1850 4700 2950
3.0 m 1800 950 2950 1750 4400 2700 7300 4450
1.5 m 1750 900 2800 1600 4100 2400 6600 3850
0.0 m 1750 900 2650 1450 3850 2150 6100 3400 *6500 *6200
–1.5 m 1900 950 2550 1350 3550 1950 5850 3200 *8750 6100
–3.0 m 2250 1150 2550 1350 3350 1900 5800 3200 *12150 6200
Rear outrigger on ground Arm length 3500 mm
7.5 m *2650 2550 *2700 2600
6.0 m *2550 2100 *4150 2650
4.5 m *2550 1750 *4950 2550 *5400 3950
3.0 m *2650 1550 5750 2450 *7300 3650 *9600 6000
1.5 m *2850 1450 5550 2250 *8000 3350 *11100 5350
0.0 m *3200 1450 5350 2150 7950 3100 *11450 4850 *6500 *6500
–1.5 m *3800 1600 5250 2050 7650 2850 *10700 4650 *8750 *8750
–3.0 m *4900 1900 *4750 2050 *6550 2850 *8950 4600 *12200 9200
Front outrigger and rear blade on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 3500
4.5 m *2600 2300 *5050 3400 *5500 5150
3.0 m *2700 2050 5250 3250 *7450 4850 *9750 7950
1.5 m *2950 2000 5050 3100 7450 4550 *11250 7250
0.0 m *3300 2000 4900 2950 7150 4300 *11650 6750 *6600 *6600
–1.5 m 3650 2150 4800 2900 6850 4000 *10850 6500 *8900 *8900
–3.0 m *3950 2550 4800 2850 *6650 4000 *9100 6500 *12400 *12400
Front and rear outrigger on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 *4200
4.5 m *2600 *2600 *5050 4200 *5500 *5500
3.0 m *2700 2650 5850 4050 *7450 6000 *9750 *9750
1.5 m *2950 2550 5650 3900 *8100 5650 *11250 9200
0.0 m *3300 2550 5500 3750 8050 5400 *11650 8650 *6600 *6600
–1.5 m *3950 2750 5400 3650 7750 5100 *10850 8400 *8900 *8900
–3.0 m *3950 3200 *4800 3650 *6650 5050 *9100 8350 *12400 *12400
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-65
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW200-7 (Two piece boom)
2F-66
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW210-1 (One piece boom)
Conditions:
Boom: 5700 mm (18'8"), Bucket (SAE): 0.80 m3 (1.05 cu.yd), Tires: 10.00-20-14PR unit: kg (lb)
A MAX 7.5 m (25') 6.0 m (20') 4.5 m (15') 3.0 m (10')
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
When outrigger retracted Arm length 2410 mm (7'11")
6.0 m 3200 2100 *3600 3000
(20') (7100) (4600) (8000) (6600)
4.5 m 2700 1700 2900 1850 *4100 2800
(15') (5900) (3700) (6400) (4100) (9100) (6200)
3.0 m 2450 1500 2800 1750 4050 2600 *6400 4000
(10') (5400) (3300) (6200) (3900) (9000) (5700) (14100) (8800)
1.5 m 2350 1450 2700 1650 3850 2350 5900 3550
(5') (5200) (3100) (6000) (3700) (8400) (5200) (13100) (7900)
0m 2450 1450 2650 1600 3700 2250 5700 3350 *5400 *5400
(0') (5400) (3200) (5800) (3500) (8100) (4900) (12600) (7400) (1200) (1200)
–1.5 m 2750 1650 3650 2300 5650 3350 *9900 6300
(–5') (6000) (3600) (8000) (4900) (12500) (7400) (21800) (13900)
–3.0 m 3450 2100 3750 2300 5800 3450 *11900 6500
(–10') (7600) (4700) (8200) (5000) (12800) (7600) (26300) (14400)
–4.5 m 5650 3500 6150 3750
(–15') (12500) (7700) (13600) (8300)
When outrigger expanded Arm length 2410 mm (7'11")
6.0 m *3350 2800 *3600 *3600
(20') (7400) (6200) (8000) (8000)
4.5 m *3400 2350 *3850 2500 *4100 3750
(15') (7500) (5100) (8500) (5600) (9100) (8300)
3.0 m *3550 2100 *4200 2400 *4850 3500 *6400 5400
(10') (7900) (4600) (9200) (5300) (10700) (7700) (14100) (12000)
1.5 m *3950 2000 *4550 2300 *5600 3250 *7800 4950
(5') (8700) (4500) (10100) (5100) (12300) (7200) (17200) (11000)
0m *4600 2100 *4850 2250 *6150 3150 *8550 4750 *5400 *5400
(0') (10100) (4600) (10700) (5000) (13500) (6900) (18900) (10500) (12000) (12000)
–1.5 m *5000 2350 *6350 3100 *8700 4750 *9900 9250
(–5') (11100) (5200) (14000) (6800) (19200) (10400) (21800) (20400)
–3.0 m 5500 2950 *5950 3200 *8200 4850 *11900 9500
(–10') (12100) (6500) (13100) (7000) (18100) (10700) (26300) (21000)
–4.5 m *6000 4800 *6450 5150
(–15') (13300) (10600) (14200) (11400)
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on SAE Standard No.J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-67
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 1800 mm
7.5 m *4800 4300
6.0 m 4150 2900 5200 3700
4.5 m 3350 2300 3350 2300 5050 3550 8200 5700 *16900 10850
3.0 m 3000 2050 3300 2250 4800 3350 7550 5100
1.5 m 2900 1950 3200 2200 4500 3050 7000 4650
0.0 m 3000 2000 3150 2100 4300 2850 6800 4450
–1.5 m 3350 2250 4300 2850 6850 4500 *9300 8650
–3.0 m *4050 2850 4500 3050 *6300 4650
Rear outrigger on ground Arm length 1800 mm
7.5 m *4800 *4800
6.0 m *4450 3750 *7700 4700
4.5 m *4400 3050 *4450 3050 *8550 4600 *11050 7350 *16900 14600
3.0 m *4650 2700 6300 3000 *9050 4350 *12400 6700
1.5 m *5100 2600 6150 2900 9000 4050 *12550 6200
0.0 m 5750 2700 6100 2850 *8500 3850 *11350 6000 *9300 *9300
–1.5 m *5250 3000 *7150 3850 *9300 6050
–3.0 m *4050 3800 *4600 4050 *6300 3200
Front outrigger and rear blade on ground Arm length 1800 mm
7.5 m *4850 *4850
6.0 m *4500 *4500 *7850 5950
4.5 m *4500 3900 *4500 3900 8600 5800 *11200 9400 *17150 *17150
3.0 m *4700 3500 5700 3850 8350 5550 *12600 8700
1.5 m 5050 3400 5600 3750 8000 5250 *12750 8150
0.0 m 5250 3500 5550 3700 7750 5050 *11550 7950
–1.5 m *5350 3900 *7250 5000 *9450 8000 *9500 *9500
–3.0 m *4150 *4150 *4700 *4700 *6450 *6450
Front and rear outrigger on ground Arm length 1800 mm
*4850 *4850 *4850
6.0 m *4500 *4500 *7850 7100
4.5 m *4500 *4500 *4500 *4500 *8700 6950 *11200 *11200 *17150 *17150
3.0 m *4700 4250 6350 4650 *9200 6700 *12600 10750
1.5 m *5150 4100 6250 4550 9000 6400 *12750 10150
0.0 m 5850 4250 6200 4450 *8650 6150 *11550 9950
–1.5 m *5350 4750 *7250 6150 *9450 *9450 *9500 *9500
–3.0 m *4150 *4150 *4700 *4700 *6450 *6450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-68
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 1800 mm
7.5 m *5050 4900 *7000 6250
6.0 m *4550 3200 5250 3700 *7100 6300
4.5 m 3650 2500 5150 3600 *8450 5900 *12000 11450
3.0 m 3200 2150 3350 2250 4900 3400 7600 5100
1.5 m 3050 2050 3250 2150 4650 3150 7200 4750
0.0 m 3150 2100 3150 2100 4400 2950 6900 4500
–1.5 m 3550 2350 4400 2900 6900 4450 *12050 8500
–3.0 m 7050 4600
Rear outrigger on ground Arm length 1800 mm
7.5 m *5050 *5050 *7000 *7000
6.0 m *4550 4100 *6600 4750 *7100 *7100
4.5 m *4450 3300 *7050 4650 *8450 7600 *12000 *12000
3.0 m *4600 2900 *6150 3000 *7850 4400 *10300 6750
1.5 m *5050 2750 6300 2900 *8600 4150 *12000 6350
0.0 m *5800 2850 *6000 2850 *8900 3950 *12350 6100
–1.5 m *6950 3200 *8550 3950 *11700 6050 *12050 *12050
–3.0 m *9850 6250
Front outrigger and rear blade on ground Arm length 1800 mm
7.5 m *5100 *5100 *7100 *7100
6.0 m *4600 *4600 *6700 6100 *7250 *7250
4.5 m *4500 4250 *7150 6000 *8600 *8600 *12150 *12150
3.0 m *4700 3800 *6250 3900 *8000 5700 *10450 8900
1.5 m *5100 3650 6200 3800 *8750 5450 *12200 8450
0.0 m *5900 3750 6100 3750 8750 5200 *12550 8200
–1.5 m 6900 4200 *8700 5200 *11900 8150 *12250 *12250
–3.0 m *10050 8350
Front and rear outrigger on ground Arm length 1800 mm
7.5 m *5100 *5100 *7100 *7100
6.0 m *4600 *4600 *6700 *6700 *7250 *7250
4.5 m *4500 *4500 *7150 *7150 *8600 *8600 *12150 *12150
3.0 m *4700 4500 *6250 4700 *8000 6850 *10450 *10450
1.5 m *5100 4350 6350 4600 *8750 6550 *12200 10400
0.0 m *5900 4500 *6100 4500 9000 6350 *12550 10100
–1.5 m *7050 5050 *8700 6300 *11900 10100 *12250 *12250
–3.0 m *10050 *10050
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-69
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2400 mm
7.5 m *4250 3500 *5050 3750
6.0 m 3600 2500 5300 3800
4.5 m 3000 2050 3450 2400 5150 3650 8450 5900
3.0 m 2700 1800 3350 2300 4900 3400 7700 5250
1.5 m 2600 1750 3250 2200 4650 3150 7200 4800
0.0 m 2650 1750 3150 2100 4350 2900 6900 4550
–1.5 m 2950 1950 3100 2100 4250 2800 6850 4500 *9750 8550
–3.0 m 3550 2400 4400 2950 6950 4600 *9100 8800
Rear outrigger on ground Arm length 2400 mm
7.5 m *4250 *4250 *5050 4800
6.0 m *4000 3250 *6800 4850
4.5 m *4050 2700 *6300 3150 *8100 4700 *9950 7550
3.0 m *4200 2450 6350 3050 *8800 4450 *11800 6850
1.5 m *4600 2350 6200 2900 9150 4150 *12700 6400
0.0 m 5150 2400 6100 2850 8800 2900 *12100 6100
–1.5 m *5150 2650 *5700 2800 *7800 3800 *10450 6050 *9750 *9750
–3.0 m *4350 3200 *5900 3950 *7800 6150 *9100 *9100
Front outrigger and rear blade on ground Arm length 2400 mm
7.5 m *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 6050
4.5 m *4100 3500 5900 4000 *8250 5900 *10100 9650
3.0 m *4300 3150 5750 3900 8450 5650 *12000 8900
1.5 m 4600 3050 5650 3750 8150 5350 *12900 8400
0.0 m 4700 3150 5550 3700 7800 5100 *12300 8050
–1.5 m 5200 3450 5500 3650 7700 5000 *10600 8000 *9900 *9900
–3.0 m *4450 4150 *6000 5150 *7950 *7950 *9300 *9300
Front and rear outrigger on ground Arm length 2400 mm
*4850 *4350 *4350 *5100 *5100
6.0 m *4100 *4100 *6900 *6900
4.5 m *4100 *4100 *6350 4800 *8250 7100 *10100 *10100
3.0 m *4300 3850 6400 4700 *8900 6800 *12000 *10950
1.5 m *4700 3700 6300 4550 9150 6500 *12900 10400
0.0 m 5250 2800 6150 4450 8800 6200 *12300 10050
–1.5 m *5250 4200 *5800 4450 *7900 6100 *10600 10000 *9900 *9900
–3.0 m *4450 *4450 *6000 *6000 *7950 *7950 *9300 *9300
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-70
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2400 mm
7.5 m *4400 3900
6.0 m 3900 2700 5450 3850
4.5 m 3200 2200 3500 2400 5300 3750 *7500 6100
3.0 m 2850 1900 3400 2300 5000 3500 8100 5500
1.5 m 2750 1800 3300 2200 4750 3200 7400 4950
0.0 m 2800 1850 3150 2100 4500 3000 7000 4600
–1.5 m 3000 1950 3150 2050 4400 2900 6900 4500 *9150 8450
–3.0 m 3850 2550 4450 2950 6950 4550 14550 8700
Rear outrigger on ground Arm length 2400 mm
7.5 m *4400 *4400
6.0 m *4100 3550 *5850 4900
4.5 m *4050 2900 *5550 3150 *6450 4800 *7500 *7500
3.0 m *4200 2600 *6250 3050 *7350 4550 *9550 7200
1.5 m *4550 2450 6300 2950 *8300 4250 *11450 6550
0.0 m *5200 2500 6200 2850 *8850 4000 *12350 6200
–1.5 m 6100 2800 6150 2800 *8800 3900 *12150 6050 *10950 *10950
–3.0 m *6600 3450 *7800 3950 *10850 6150 *15400 12250
Front outrigger and rear blade on ground Arm length 2400 mm
7.5 m *4500 *4500
6.0 m *4150 *4150 *5950 *5950
4.5 m *4100 3750 *5600 4100 6550 6100 *7600 *7600
3.0 m *4250 3400 6350 4000 *7500 5850 *9750 9400
1.5 m *4600 3250 6200 3850 *8400 5550 *11650 8700
0.0 m *5250 3350 6100 3750 8850 5300 *12550 8300
–1.5 m 6000 3700 6050 3700 8700 5150 *12350 8150 *11150 *11150
–3.0 m *6700 4500 *7950 5250 *11050 8250 *15650 *15650
Front and rear outrigger on ground Arm length 2400 mm
7.5 m *4500 *4500
6.0 m *4150 *4150 *5950 *5950
4.5 m *4100 *4100 *5600 4850 *6550 *6550 *7600 *7600
3.0 m *4250 4050 *6350 4750 *7500 6950 *9750 *9750
1.5 m *4600 3900 6400 4650 *8400 6650 *11650 10650
0.0 m *5250 4000 6250 4500 *9000 6400 *12550 10250
–1.5 m 6150 4450 6250 4500 8950 6300 *12350 10100 *11150 *11150
–3.0 m *6700 5450 *7950 6350 *11000 10200 *15650 *15650
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-71
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2900 mm
7.5 m *2650 *2650 *4450 3850
6.0 m *2550 2200 3550 2450 *5300 3850
4.5 m *2550 1800 3500 2450 5200 3700
3.0 m 2450 1600 3350 2300 4950 3450 8000 5500 16400 10300
1.5 m 2350 1550 3250 2200 4650 3200 7350 4900
0.0 m 2400 1550 3100 2100 4400 2950 6950 4550 *5950 *5950
–1.5 m 2600 1700 3050 2000 4200 2750 6800 4450 *9200 8450
–3.0 m 3050 2050 3100 2050 4250 2800 6850 4450 *11250 8650
Rear outrigger on ground Arm length 2900 mm
7.5 m *2650 *2650 *4450 *4450
6.0 m *2550 *2550 *3850 3200 *5300 4900
4.5 m *2550 2400 *5300 3150 *6600 4750
3.0 m *2650 2200 6350 3050 *8450 4500 *11300 7150 *18150 13950
1.5 m *2900 2100 6200 2900 9000 4200 *12500 6500
0.0 m *3300 2150 6050 2800 8850 3950 *12400 6150 *5950 *5950
–1.5 m *4000 2350 6000 2750 8150 3750 *11150 6000 *9200 *9200
–3.0 m *4350 2750 *4400 2800 *6600 3800 *8850 6050 *11250 *11250
Front outrigger and rear blade on ground Arm length 2900 mm
7.5 m *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4050 *6700 5950
3.0 m *2700 *2700 5800 3900 8500 5700 *11450 9150 *18400 *18400
1.5 m *2950 2750 5650 3750 8200 5400 *12700 8500
0.0 m *3350 2800 5500 3650 7850 5100 *12600 8100 *6050 *6050
–1.5 m *4050 3050 5450 3600 7650 4950 *11300 7950 *9300 *9300
–3.0 m *4450 3600 *4500 3600 *6700 5000 *9000 8000 *11450 *11450
Front and rear outrigger on ground Arm length 2900 mm
*4850 *2700 *2700 *4500 *4500
6.0 m *2600 *2600 *3900 *3900 *5400 *5400
4.5 m *2600 *2600 *5400 4400 *6700 6600
3.0 m *2700 *2700 5950 4300 *8500 6300 *11300 10400 *18150 *18150
1.5 m *2950 *2950 5800 4150 8500 6000 *12650 9700
0.0 m *3350 3100 5650 4050 8150 5700 *12650 9250 *6050 *6050
–1.5 m *4050 3350 5600 4950 7950 5500 *11500 9100 *9300 *9300
–3.0 m *4600 4000 *4650 4000 *6900 5550 *9300 9150 *11450 *11450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-72
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 2900 mm
7.5 m *2800 *2800 *4150 3900
6.0 m *2600 2350 *3200 2500 *5150 3950
4.5 m *2550 1900 3550 2450 5400 3800 *6300 6300
3.0 m 2550 1700 3450 2350 5100 3550 8300 5700 *13450 10900
1.5 m 2450 1600 3300 2200 4750 3250 7550 5050 *6350 *6350
0.0 m 2500 1600 3150 2100 4500 3000 7050 4600 *6950 *6950
–1.5 m 2750 1750 3100 2000 4350 2850 6850 4450 *10200 8400
–3.0 m 3250 2150 4350 2850 6850 4450 14350 8550
Rear outrigger on ground Arm length 2900 mm
7.5 m *2800 *2800 *4150 *4150
6.0 m *2600 *2600 *3200 *3200 *5150 5000
4.5 m *2550 *2550 *4950 3200 *5850 4850 *6300 *6300
3.0 m *2650 2300 *5900 3100 *6850 4600 *8700 7400 *13450 *13450
1.5 m *2900 2200 6350 2950 *7900 4300 *10850 6700 *6350 *6350
0.0 m *3250 2250 6200 2800 *8650 4050 *12100 6250 *6950 *6950
–1.5 m *3950 2450 6100 2750 *8800 3850 *12250 6050 *10200 *10200
–3.0 m *5250 2950 *8250 3900 *11400 6050 *15250 12100
Front outrigger and rear blade on ground Arm length 2900 mm
7.5 m *2850 *2850 *4250 *4250
6.0 m *2650 *2650 *3250 *3250 *5250 *5250
4.5 m *2600 *2600 *5000 4150 *5950 *5950 *6400 *6400
3.0 m *2700 *2700 *6000 4000 *6950 *5900 *8850 *8850 *13700 *13700
1.5 m *2950 *2950 6250 3850 *8050 5600 *11000 8850 *6450 *6450
0.0 m *3350 3000 6100 3750 *8800 5300 *12300 8350 *7050 *7050
–1.5 m *4000 3250 6000 3650 8650 5150 *12450 8150 *10350 *10350
–3.0 m *5350 3150 *8400 5150 *11600 8150 *15450 *15450
Front and rear outrigger on ground Arm length 2900 mm
7.5 m *2850 *2850 *4250 *4250
6.0 m *2650 *2650 *3250 *3250 *5250 *5250
4.5 m *2600 *2600 *5000 4500 *5950 *5950 *6400 *6400
3.0 m *2700 *2700 *6000 4400 *6950 6500 *8850 *8850 *13700 *13700
1.5 m *2950 *2950 5900 4250 *8050 6150 *11000 10000 *6450 *6450
0.0 m *3350 3250 5750 4100 8400 5850 *12300 9450 *7050 *7050
–1.5 m *4000 3550 5700 4000 8200 5700 *12450 9200 *10350 *10350
–3.0 m *5350 4250 8250 5700 *11600 9200 *15450 *15450
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-73
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (One piece boom)
Conditions: Boom: 5700 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 3500 mm
7.5 m *2650 2450 *2700 2500
6.0 m *2550 1900 3600 2550
4.5 m 2400 1600 2450 1600 3550 2450 5300 3800
3.0 m 2150 1400 2400 1550 3400 2350 5000 3500 8200 5650
1.5 m 2100 1350 2300 1500 3250 2200 4700 3200 7500 5050
0.0 m 2100 1350 2250 1450 3100 2050 4450 2950 7000 4600 *6500 *6500
–1.5 m 2250 1450 3000 1950 4150 2750 6750 4400 *8750 8300
–3.0 m 2650 1700 3000 1950 4150 2700 6700 4350 *12350 8400
Rear outrigger on ground Arm length 3500 mm
7.5 m *2650 *2650 *2700 *2700
6.0 m *2550 2500 *4150 3300
4.5 m *2550 2150 *2850 2200 *4950 3200 *5400 4800
3.0 m *2650 1950 *3950 2150 *6200 3050 *7750 4550 *10450 7300
1.5 m *2900 1850 4500 2100 6200 2900 *8750 4250 *12150 6650
0.0 m *3250 1900 4450 2000 6050 2800 8900 3950 *12550 6150 *6500 *6500
–1.5 m *3900 2050 5950 2700 *8450 3700 *11700 5950 *8750 *8750
–3.0 m *4300 2350 *5250 2650 *7200 3700 *9850 5950 *12350 11900
Front outrigger and rear blade on ground Arm length 3500 mm
7.5 m *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 4150
4.5 m *2600 *2600 *2900 2850 *5050 4050 *5500 *5500
3.0 m *2700 2550 *4000 2800 5800 3950 *7900 5750 *10600 9400
1.5 m *2950 2450 4150 2750 5650 3750 8250 5450 *12300 8650
0.0 m *3300 2500 4050 2650 5500 3600 7950 5150 *12750 8150 *6600 *6600
–1.5 m *3950 2700 5400 3550 7600 4900 *11900 7900 *8900 *8900
–3.0 m *4400 3100 *5350 3500 *7350 4850 *10000 7900 *12550 *12550
Front and rear outrigger on ground Arm length 3500 mm
*4850 *2700 *2700 *2750 *2750
6.0 m *2600 *2600 *4200 *4200
4.5 m *2600 *2600 *2900 *2900 *5050 4900 *5500 *5500
3.0 m *2700 *2700 *4000 3400 *6300 4750 *7900 6950 *10600 *10600
1.5 m *2950 *2950 4600 3350 6300 4550 *8900 6600 *12300 10700
0.0 m *3300 3100 4500 3250 6150 4400 8950 6300 *12750 10150 *6600 *6600
–1.5 m *3950 3300 6050 4300 *8600 6050 *11900 9900 *8900 *8900
–3.0 m *4400 3800 *5350 6400 *7350 6000 *10000 9850 *12550 *12550
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-74
Lifting Capacity WHEEL-TYPE
EXCAVATORS
PW220-7 (Two piece boom)
Conditions: Boom: 5400 mm, Bucket (SAE): 1.0 m3, Tires:11.00-20-14PR unit: kg
A MAX 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Without stabilizer Arm length 3500 mm
7.5 m *2700 2700
6.0 m *2550 2050 3650 2550 *4500 4050
4.5 m 2550 1700 3600 2500 *5100 3900
3.0 m 2300 1500 2400 1550 3450 2400 5200 3600 *7650 5900 *10850 *10850
1.5 m 2200 1400 2350 1500 3300 2200 4850 3300 4650 5150
0.0 m 2200 1400 2250 1450 3150 2050 4500 3000 7150 4700 *7600 *7600
–1.5 m 2400 1500 3000 1950 4300 2850 6850 4400 *9700 8300
–3.0 m 2800 1800 3000 1950 4250 2750 6750 4350 *13700 8350
Rear outrigger on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2550 *2550 *3950 3350 *4500 *4500
4.5 m *2550 2300 *4750 3250 *5100 4950
3.0 m *2650 2050 *3350 2150 *5450 3150 *6250 4700 *7650 7600 *10850 *10850
1.5 m *2850 1950 *3950 2100 *6050 2950 *7400 4350 *9900 6800
0.0 m *3200 2000 *3650 2000 6200 2800 *8300 4050 *11650 6300 *7600 *7600
–1.5 m *3800 2150 6050 2700 *8750 3850 *12200 6000 *9750 *9750
–3.0 m *4900 2500 6050 2700 *8500 3850 *11800 5950 *13700 11850
Front outrigger and rear blade on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2600 *2600 *4000 *4000 *4550 *4550
4.5 m *2600 *2600 *4850 4200 *5200 *5200
3.0 m *2700 *2700 *3400 2850 *5550 4050 *6350 6000 *7750 *7750 *11050 *11050
1.5 m *2900 2650 *4000 2800 *6150 3900 *7500 5650 *10100 8950
0.0 m *3250 2650 *3700 2700 6100 3700 *8450 5350 *11800 8450 *7700 *7700
–1.5 m *3850 2850 5950 3600 8650 5100 *12450 8100 *9850 *9850
–3.0 m *5000 3350 5950 3600 8600 5050 *12000 8050 *13900 *13900
Front and rear outrigger on ground Arm length 3500 mm
7.5 m *2750 *2750
6.0 m *2600 *2600 *4000 *4000 *4550 *4550
4.5 m *2600 *2600 *4850 *4850 *5200 *5200
3.0 m *2700 *2700 *3400 *3400 *5500 4850 *6350 *6350 *7750 *7750 *11050 *11050
1.5 m *2900 *2900 *4000 3350 *6150 4650 *7500 6750 *10100 *10100
0.0 m *3250 *3250 *3700 3300 6250 4500 *8450 6450 *11800 10400 *7700 *7700
–1.5 m *3850 3500 6150 4350 8900 6250 *12450 10050 *9850 *9850
–3.0 m *5000 4050 6100 4350 *8650 6150 *12000 9950 *13900 *13900
* Load is limited by hydraulic capacity rather than tipping.
Ratings are based on ISO Standard No.10567.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
2F-75
MEMO
SECTION 2G
DEMOLITION
CONTENTS
Machine and attachment
Selection (guide line) .......................................... 2G-2
Attachment features and specifications:
Demolition specification ..................................... 2G-4
Demolition high reach ......................................... 2G-6
Demolition two piece boom .............................. 2G-11
Hydraulic crusher and cutter ............................ 2G-12
Hydraulic crusher .............................................. 2G-14
Concrete pulverizer ........................................... 2G-15
Jumbo crusher ................................................... 2G-17
Power fork .......................................................... 2G-18
Rotary grab ........................................................ 2G-19
Underground demolition specifications .......... 2G-20
2G-1
Machine and Attachments DEMOLITION
Selection (Guide Line)
1. When carrying out demolition of concrete building from the ground
1) For demolition of 4~10 storied buildings use a hydraulic excavator with a super long boom and arm as
base machine.
2) For demolition of 2~4 storied buildings use a hydraulic excavator with a normal boom and arm as the base
machine.
3) For demolition of the foundations or areas below ground level, use a hydraulic excavator with the normal
boom and arm as the base machine and operate from the ground level. If necessary, lower the machine
below the ground to carry out the work.
39.5m
36m
24m
15m
5~8m
FVBH0321
DEMOLITION
HIGH
REACH
2G-2
Machine and Attachments DEMOLITION
Selection (Guide Line)
2. When carrying out demolition from inside the building being demolished
There is no space to carry out demolition work with machine from the ground level, or the building is too high
(higher than 6 stories) to demolished, and the demolition attachment does not reach, place the demolition
machine on the top floor of the building to be demolished. Start the demolition operation from the top, and
work down.
2G-3
Attachment Features and Specifications DEMOLITION
Demolition Specification
• Demolition work means hard work for hydraulic excavators. Operator safety, machine flexibility, reliability
and performance are essential for this application.
• Demolition specification features additional machine guarding, reinforced structure and better visibility that
enables safer and more efficient operation.
Specifications
Model PC138US PC200 PC200LC PC228US
Operating weight kg(lb) 14,250(31,400) 21,400(47,200) 22,300(49,200) 24,400(53,800)
Bucket capacity SAE m3(cu.yd) 0.5(0.65) 0.8(1.05) 0.8(1.05)
Arm crowd force kN(kgf) 62(6,300) 108(11,000)* 108(11,000)*
Bucket digging force kN(kgf) 93(9,500) 149(15,200)* 149(15,200)*
Ground pressure kPa(kgf/cm2) 45.9(0.47) 48.1(0.49) 45.1(0.46) 53.0(0.54)
Max. digging height mm(ft.in) 9,340(30'7") 10,000(32'9") 10,700(35'1")
Max. digging depth mm(ft.in) 5,480(17'11") 6,620(21'8") 6,620(21'8")
Max. digging reach mm(ft.in) 8,300(27'2") 9,875(32'4") 9,875(32'4")
Tail swing radius mm(ft.in) 1,480(4'10") 2,940(9'7") 1,680(5'6")
Overall length (in transport) mm(ft.in) 7,220(23'8") 9,625(31'6") 8,700(28'6")
Overall height (in transport) mm(ft.in) 2,850(9'4") 3,000(9'10") 3,035(9'11")
Overall width mm(ft.in) 2,515(8'3") 2,875(9'5") 2,980(9'9") 2,980(9'9")
Sound level dB 100 102 101
2G-4
Attachment Features and Specifications DEMOLITION
Demolition Specification
Specifications
Model PC220 PC220LC PC300 PC300LC
Operating weight kg(lb) 23,400(51,600) 24,400(53,800) 32,300(71,200) 33,400(73,600)
Bucket capacity SAE m3(cu.yd) 1.0(1.31) 1.4(1.83)
Arm crowd force kN(kgf) 129(13,200)* 171(17,400)*
Bucket digging force kN(kgf) 172(17,500)* 227(23,100)*
Ground pressure kPa(kgf/cm2) 52.0(0.53) 49.0(0.50) 65.7(0.67) 62.8(0.64)
Max. digging height mm(ft.in) 10,000(32'9") 10,210(33'5")
Max. digging depth mm(ft.in) 6,920(22'8") 7,380(24'2")
Max. digging reach mm(ft.in) 10,180(33'4") 11,100(36'5")
Tail swing radius mm(ft.in) 2,940(9'7") 3,540(11'7")
Overall length (in transport) mm(ft.in) 9,885(32'5") 11,140(36'6")
Overall height (in transport) mm(ft.in) 3,160(10'4") 3,280(10'9")
Overall width mm(ft.in) 2,980(9'9") 3,180(10'5") 3,190(10'5")
Sound level dB 103 104
* Using power max. function and ISO rating
2G-5
Attachment Features and Specifications DEMOLITION
Demolition High Reach
• Demolition high reach enables high efficient
operation and safety for 3-4 stories building
demolition.
• Two-stage front type provides easy demolition
operation thanks to the same lever motion as
standard machine.
Working Range
PC200LC PC200LC
(2-stage type for demolition work only) (2-stage type for demolition and digging work)
Specifications
Model PC200LC
High reach type 2-stage
Structure
Boom type 1-piece
Application For Demolition work For Demolition & Digging work
Operating Weight *1 kg(lb) 26,040(57,410) 25,200(55,560)
Max. Allowable Crusher Weight kg(lb) 2,300(5,070) 2,300(5,070)
Max. Working Height *2 A mm(ft.in) 15,200(49'10") 13,500(44'3")
Arm Top Pin Radius at Max. Working Height B mm(ft.in) 3,810(12'6") 3,625(11'11")
Max. Allowable Working Radius C mm(ft.in) 8,300(27'3") 9,000(29'6")
Tail Swing Radius D mm(ft.in) 2,910(9'7") 2,910(9'7")
Overall Length *3 E mm(ft.in) 13,210(43'4") 11,100(36'5")
Overall Height *3 F mm(ft.in) 3,160(10'4") 3,160(10'4")
Height of Folded Work Equipment G mm(ft.in) 2,850(9'4") 3,000(9'10")
* The photos may slightly differ from the standard specifications of demolition high reach.
* For precautions when operating the machine, refer to the operation and maintenance manual.
*1 Excluding allowable crusher weight
*2 Arm top pin
*3 When work equipment is folded and lowered to the ground
2G-6
Attachment Features and Specifications DEMOLITION
Demolition High Reach
• Demolition high reach enables high efficient
operation and safety for 3-4 stories building
demolition.
• Three-stage front type suits for delicate demolition
work thanks to the intermediate arm that ensures
the wider working range than 2-stage type.
Working Range
PC200LC
(3-stage type for demolition work only)
Specifications
Model PC200LC
High reach type 3-stage
Structure
Boom type 1-piece
Operating Weight *1 kg(lb) 26,480(58,380)
Max. Allowable Crusher Weight kg(lb) 2,100(4,630)
Max. Working Height *2 A mm(ft.in) 15,200(49'10")
Arm Top Pin Radius at Max. Working Height B mm(ft.in) 3,600(11'10")
Max. Allowable Working Radius C mm(ft.in) 7,600(24'11")
Tail Swing Radius D mm(ft.in) 2,910(9'7")
Overall Length *3 E mm(ft.in) 11,260(36'11")
Overall Height *3 F mm(ft.in) 3,160(10'4")
Height of Folded Work Equipment G mm(ft.in) 2,750(9')
* The photos may slightly differ from the standard specifications of demolition high reach.
* For precautions when operating the machine, refer to the operation and maintenance manual.
*1 Excluding allowable crusher weight
*2 Arm top pin
*3 When work equipment is folded and lowered to the ground
2G-7
Attachment Features and Specifications DEMOLITION
Demolition High Reach
• There are several stages at the demolition works such as demolishing structures, taking out debris,
leveling ground etc. which are required several machines at each process.
• The exchangeable fronts system can reduce the cost and time for demolition works. Three types of
equipments are available by exchanging front equipment at one machine.
• Safety devices are equipped such as working range monitor, wide view front glass etc.
Working Range
Specifications
Model PC300LC PC400LC
Operating weight kg(lb) 41,000(90,400) 54,500(120,000)
Max.allowance att weight kg(lb) 2,300(5,070) 5,700(12,600)
A Max.working height mm(ft.in) 20,180(66'2") 24,660(80'10")
Demolition high reach B Max.working radius mm(ft.in) 11,000(36'1") 13,000(42'7")
C Min.working radius mm(ft.in) 3,955(12'11") 3,760(12'4")
D Max.working height mm(ft.in) 14,380(47'2") 15,145(49'8")
Two piece boom E Max.working radius mm(ft.in) 12,620(41'4") 9,000(29'6")
F Min.working radius mm(ft.in) 1,650(5'4") 2,225(7'3")
D Max.working height mm(ft.in) 10,540(34'6")
E Max.working radius mm(ft.in) 11,590(38')
Digging boom N/A
7,410(24'3")
F Min.working radius mm(ft.in)
(Max.digging depth)
2G-8
Attachment Feature and Specifications DEMOLITION
Demolition High Reach
• Komatsu developed 39.5 meters (129'7") demolition high reach that can demolish buildings with the height
of a 12-13 stories from the ground.
• This machine features three section boom with quick joint system and a short link section.
• The quick joint system enables that set up time is quicker at job site and make the transfer posture easier.
2G-9
Attachment Features and Specifications DEMOLITION
Demolition High Reach
Working Range Dimensions
Specifications
Model PC800
Operating weight kg(lb) 106,400(235,000)
Max.working height A mm(ft.in) 39,500(129'7")
Max.working radius B mm(ft.in) 20,000(65'7")
Max. attachment weight kg(lb) 2,300(5,070)
All boom length mm(ft.in) 21,770(71'5")
Top boom length mm(ft.in) 6,000(19'8")
Intermediate boom length mm(ft.in) 3,500(11'5")
Bottom boom mm(ft.in) 12,270(40'3")
Intermediate linkage mm(ft.in) 2,800(9'2")
Arm length mm(ft.in) 12,500(41')
Additional C/W kg(lb) 10,000(22,100)
2G-10
Attachment Features and Specifications DEMOLITION
Demolition Two Piece Boom
• The demolition two piece boom now realizes a higher, wider and longer working range.
• It has also made possible demolition work comparable to a one-class larger machine in a tight quarter.
• It demonstrates power when demolishing low-rise to mid-rise building now that it can access closer to a
building to be demolishied.
• The base machine is designed for demolition work. Various critical parts and work equipment have been
strengthened to ensure higher durability. Thus it demonstrates excellent performance in the hard working
conditions.
The two piece boom enables an operator to reach a higher work point.
• PC120 demolition specifications • PC120 demolition specifications
with 2 piece boom
9500mm (31’2")
8610mm (28’3")
13630mm (44’9")
10000mm (32’10")
2G-11
Attachment Features and Specifications DEMOLITION
Hydraulic Crusher and Cutter
• Three functions in one unit
An all-purpose machine with dual functions by long and short cutters plus scantling
1) Cutting specifications
The cutter can cut even H beam steel and piping.
Long cutter length: 500 mm (JCYC19/19R), 420 mm (JCYC17/17R)
2) Crushing specifications
Front-end teeth and middle teeth crush concrete structure, while a short cutter cuts reinforcing bars.
Short cutter length: 300 mm (JCYC19/19R), 180 mm (JCYC17/17R)
3) Scantling specifications
They are most effective with splitting a concrete block into scantlings and separating reinforcing bars.
• Two rotation types
360° none hydraulic rotation with a brake and 360° hydraulic rotation.
• Synchronous arm movement
As two arms move symmetrically with a synchronous pin in their center, they can easily grab target
objects, thus assuring work of high efficiency.
• Close shutting
The front-end arms close as tightly as zero clearance. This feature enables the crusher and cutter to do
various kinds of work such as grasping things. In addition, it can easily deal with a thin wall when crushing it.
2G-12
Attachment Features and Specifications DEMOLITION
Hydraulic Crusher and Cutter
Model PC200
Item Demolition specification PC300
Crusher and cutter model JCYC17 JCYC17R JCYC19 JCYC19R
360° none 360° none
Crusher and cutter rotation mechanism hydraulic 360° hydraulic hydraulic 360° hydraulic
rotation rotation
rotation rotation
Operating weight (with long cutter) kg (lb) 23070 (50,860) 23120 (50,970) 32910 (72,550) 33060 (72,880)
Engine model KOMATSU SAA6D102E KOMATSU SAA6D114E
Horsepower kW (HP)/RPM 107 (143)/1950 180 (242)/1900
Crushing force (at X portion) kN/ton (U.S.ton) 980/100 (110) 1196/122 (135)
Crushing force (at Y portion) kN/ton (U.S.ton) 1470/150 (165) 1764/180 (198)
a: Max. open width (at X portion) mm (ft.in) 820 (2’8”) 1020 (3’4”)
b: Max. open height mm (ft.in) 1300 (4’3”) 1680 (5’6”)
c: Open depth mm (ft.in) 650 (2’2”) 800 (2’7”)
d: Open width (at Y portion) mm (ft.in) 520 (1’8”) 675 (2’3”)
Crusher and cutter dimensions
e: Max. open width (at front-end cutter) mm (ft.in) 530 (1’9”) 670 (2’2”)
f: Arm tip width mm (ft.in) 120 (5’) 120 (5’)
h: Overall height mm (ft.in) 1300 (4’3”) 1680 (5’6”)
and performance
B: Max. crushing radius on ground mm (ft.in) 10425 (34’2”) 10610 (34’10”) 11860 (38’11”) 12025 (39’5”)
C: Max. dumping height mm (ft.in) 6358 (20’10”) 6205 (20’4”) 6100 (20’) 5935 (19’6”)
PC200/PC200LC, PC220/PC220LC, PC300/PC300LC, PC340LC &
Applicable Standard boom and arm PC210LC & PC240LC PC350/PC350LC
base
machine PC300LC &
With demotion high reach PC400LC
Remarks
Onsite installation of the crusher and cutter requires a base machine to be modified. For more details, you are recommended to
consult the Komatsu distributor.
2G-13
Attachment Features and Specifications DEMOLITION
Hydraulic Crusher
The advent of concrete crusher capable of crushing concrete blocks into large pieces
• Two rotation types (JRYB12 and JRYB18)
Two types of rotation mechanism are provided: i.e. 360° none hydraulic rotation with a brake and
360°hydraulic rotation. JRYB06 provided with 360° none hydraulic rotation only.
• A cutter is provided, which is capable of crushing reinforced concrete blocks, too.
• Synchronous arm movement
As two arms move symmetrically with a synchronous pin in their center, they can easily grab target
objects, thus assuring work of high efficiency.
• Close shutting
The front-end arms close as tightly as zero clearance. This feature enables the crusher to do various
kinds of work such as grasping various things.
• The arms are made of cemented carbide steel and demonstrate the highest-in-class crushing force with
their sharp teeth. Not only that, they show outstanding wear resistance.
Model PC200
PC120
Item Demolition specifications
Crusher model JRYB12 JRYB12R JRYB18 JRYB18R
360° none hydraulic 360° 360° none hydraulic 360°
Crusher rotation mechanism
rotation hydraulic rotation rotation hydraulic rotation
Operating weight kg (lb) 12460 (27,470) 12460 (27,470) 22920 (50,530) 22970 (50,640)
Engine model KOMATSU S4D102E KOMATSU SAA6D102E
Horsepower kW (HP)/RPM 64 (86)/2200 107 (143)/1950
Crushing force (at X portion) kN/ton (U.S.ton) 686/70 (77) 686/70 (77) 980/100 (110) 980/100 (110)
Crushing force (at Y portion) kN/ton (U.S.ton) 931/95 (105) 931/95 (105) 1421/145 (160) 1421/145 (160)
a: Max. open width (at X portion) mm (ft.in) 650 (2’2”) 650 (2’2”) 870 (2’10”) 870 (2’10”)
b: Max. open height mm (ft.in) 1097 (3’7”) 1097 (3’7”) 1310 (4’4”) 1310 (4’4”)
c: Open depth mm (ft.in) 580 (1’11”) 580 (1’11”) 695 (2’3”) 695 (2’3”)
d: Open width mm (ft.in) 477 (1’7”) 477 (1’7”) 580 (1’11”) 580 (1’11”)
e: Max. open width
Crusher dimensions
B: Max. crushing radius on ground mm (ft.in) 9025 (29’7”) 9025 (29’7”) 10480 (34’5”) 11665 (38’3”)
C:Max. dumping height mm (ft.in) 5245 (17’2”) 5245 (17’2”) 6335 (20’9”) 6150 (20’2”)
Applicable With standard boom and PC120, PC120LC & PC130 PC200/PC200LC, PC220/PC220LC, PC210/
base arm PC210LC & PC240LC
machine With demotion high reach PC300LC, PC400LC & PC750LC
Remarks
Onsite installation of the crusher requires a base machine to be modified. For more details, you are recommended to consult the
Komatsu distributor.
2G-14
Attachment Features and Specifications DEMOLITION
Concrete Pulverizer
Breaking Broken Concrete into Small Pieces and Disposing of Reinforcing bars Secondary Concrete
Smashing & Reinforcing Bar Cutting
• Designed to smash broken concrete masses into small pieces, the concrete pulverizer serves as a highly
effective tool in demolition of buildings, bridges, etc.
• The smashing process by the concrete pulverizer helps in the recovery of reinforcing bars from
demolished concrete structures, and in the transporting of crushed concrete off the site.
Model PC200
PC300
Item demolition specifications
Pulverizer model JHSM250 JHSM350
Operating weight kg (lb) 22590 (49,800) 25810 (56,900)
Engine model KOMATSU SAA6D102E KOMATSU SAA6D114E
Horsepower kW (HP)/RPM 107 (143)/1950 180 (242)/1900
Crushing force (at X portion) kN/ton (U.S.ton) 755/77 (85) 882/90 (99)
Crushing force (at Y portion) kN/ton (U.S.ton) 1078/110 (121) 1274/130 (143)
a: Max. open width mm (ft.in) 810 (2’8”) 850 (2’9”)
b: Open depth mm (ft.in) 755 (2’6”) 980 (3’3”)
c: Cutter length mm (ft.in) 180 (7”) 180 (7”)
Pulverizer dimensions
2G-15
Attachment Features and Specifications DEMOLITION
Concrete Pulverizer
• The lower jaw is V-shaped to resemble a scoop, thus making the scooping work easy.
• Broken concrete masses scooped by the lower jaw are roughly broken by the large crushing tooth fixed at
the center of the upper jaw, and further smashed into small pieces by the smashing teeth on the both sides
of the upper jaw.
• A large capacity, trouble-free, and simply structured speedup valve is installed as a standard specification
to increase closing speed of the upper jaw.
• As the crushing tooth is arranged in the center of the upper jaw, the crushing force concentrates on the
crushing tooth when splitting broken concrete masses, thus exerting great crushing force.
• A long broken concrete masses is laid down on both edges of the V-shaped lower jaw, and then the upper
jaw breaks it easily.
• Both upper and lower jaws can retain long service life, as carbide wear-resistant steel is employed in the
portions that would otherwise be easily worn out.
Model PC200
Item demolition specifications
Pulverizer model JHGV200
Operating weight kg (lb) 22570 (49,760)
Engine model KOMATSU SAA6D102E
Horsepower kW (HP)/RPM 107 (143)/1950
Crushing force (at X portion) kN/ton (U.S.ton) 735/75 (83)
Crushing force (at Y portion) kN/ton (U.S.ton) 981/100 (110)
a: Max. open width mm (ft.in) 870 (2’10”)
b: Open depth mm (ft.in) 910 (3’)
c: Cutter length mm (ft.in) 180 (7”)
Pulverizer dimensions
2G-16
Attachment Features and Specifications DEMOLITION
Jumbo Crusher
• With the large max. opening width and powerful crushing force, this is a crusher ideal for crushing
into large pieces foundations and bridge piers made of reinforced concrete.
• The tips of two crushing arms firmly close as tightly as zero clearance. This feature enables the
crusher to do various kinds of work such as grasping various things.
• The jumbo crusher adopts a 360° full rotation mechanism to facilitate the crusher operation and
causes no excessive load to the base machine.
• Two types of rotation mechanism are provided: i.e. 360° non-hydraulic rotation with a brake and
360° hydraulic rotation.
• The two arms are operated by two hydraulic cylinders. The jumbo crusher can get hold of
crushable objects with great ease, while inflicting no excessive load on the boom and arm.
• A moving protection cover is provided for the cylinders, minimizing risks of possible damage to
cylinders.
Model
PC300LC PC800SE PC1250
Specifications
Jumbo crusher model JCJC1500 JCJC1500R JCJC2300 JCJC2300R JCJC2600 JCJC2600R
360° non- 360° 360° non- 360° 360° non- 360°
Jumbo crusher rotation hydraulic hydraulic hydraulic hydraulic hydraulic hydraulic
mechanism
rotation rotation rotation rotation rotation rotation
kg 33190 33340 82860 82860 113020 113020
Operating weight
(lb) (73,170) (73,500) (182,675) (182,675) (249,165) (249,165)
Engine model KOMATSU SAA6D114E KOMATSU SAA6D140E KOMATSU SAA6D170E
Horsepower kW (HP)/RPM 180 (242)/1900 338 (454)/1800 485 (651)/1800
Crushing force (at P portion) kN/ton (U.S.ton) 1764/180 (198) 1764/180 (198) 2744/280 (308) 2744/280 (308) 3234/330 (363) 3234/330 (363)
a: Max. open width mm (ft.in) 1500 (4’11”) 1500 (4’11”) 2300 (7’7”) 2300 (7’7”) 2600 (8’6”) 2600 (8’6”)
b: Max. open height mm (ft.in) 2090 (6’10”) 2090 (6’10”) 3300 (10’10”) 3300 (10’10”) 3550 (11’8”) 3550 (11’8”)
Jumbo crusher dimensions
c: Open depth mm (ft.in) 555 (1’10”) 555 (1’10”) 1050 (3’5”) 1050 (3’5”) 1065 (3’6”) 1065 (3’6”)
h: Overall height mm (ft.in) 2070 (6’9”) 2070 (6’9”) 3326 (10’11”) 3326 (10’11”) 3628 (11’11”) 3628 (11’11”)
and performance
w:Overall width mm (ft.in) 850 (2’9”) 850 (2’9”) 1590 (5’3”) 1590 (5’3”) 1590 (5’3”) 1590 (5’3”)
l: Overall length mm (ft.in) 2980 (9’9”) 3145 (10’4”) 4360 (14’4”) 4360 (14’4”) 5070 (16’8”) 5070 (16’8”)
Weight kg (lb) 3900 (8,600) 4050 (8,930) 11000 (24,250) 11000 (24,250) 12000 (26,455) 12000 (26,455)
kgf/cm2 320 320 320 320 320 320
Required oil pressure (PSI/MPa) (4,550/31.4) (4,550/31.4) (4,550/31.4) (4,550/31.4) (4,550/31.4) (4,550/31.4)
Required oil flow rate ltr (U.S.Gal)/min 500 (132) 500 (132) 800 (211) 800 (211) 800 (211) 800 (211)
Arm Opening sec. 7.5 7.5 8.0 8.0 11 11
speed Closing sec. 7.5 7.5 11 11 14 14
A: Max. crushing height mm (ft.in) 11265 (37’) 11430 (37’6”) 14000 (45’11”) 14000 (45’11”) 16000 (52’6”) 16000 (52’6”)
Working
range
Remarks
Onsite installation of the jumbo crusher requires modifications to the base machine. For more details, consult your Komatsu
distributor.
2G-17
Attachment Features and Specifications DEMOLITION
Power Fork
• Easy to install and remove
The fork can be installed only by replacing two bucket pins.
Arm-friendly special plastic is adopted for the securing pad.
• Powerful and sturdy
High tensile steel is adopted for the upper and lower teeth, while special steel alloy is used for the pin on
which heavy load is applied.
• Light and safe
Light weight has been attained thanks to a simplified structure and the use of high tensile steel. The fork
assures good balance with the base machine and excellent safety.
Model
PC30MR PC50MR PC78US PC120 PC200
Item
Power fork type PF30B PF40B PF60B PF120B PF200B
Operating weight kg (lb) 3260 (7,190) 5170 (11,400) 7060 (15,560) 12170 (26,830) 19890 (43,850)
KOMATSU KOMATSU KOMATSU KOMATSU KOMATSU
Engine model
3D84E-5 4D88E-5 4D95LE S4D102E SAA6D102E
Horsepower kW (HP)/RPM 20.6 (27.6)/2500 29.4 (39.4)/2350 40.5 (54)/1850 64 (86)/2200 107 (143)/1950
a: Max. opening width mm (ft.in) 1040 (3’5”) 1220 (4’) 1505 (4’11”) 1815 (5’11”) 2080 (6’10”)
b: Tooth length mm (ft.in) 605 (2’) 720 (2’4”) 890 (2’11”) 1010 (3’4”) 1155 (3’9”)
c: Tooth width mm (ft.in) 300 (1’) 350 (1’2”) 405 (1’4”) 545 (1’9”) 700 (2’4”)
h: Overall height mm (ft.in) 505 (1’8”) 590 (1’11”) 680 (2’3”) 820 (2’8”) 1050 (3’5”)
w: Overall width mm (ft.in) 340 (1’1”) 395 (1’4”) 430 (1’5”) 600 (2’) 745 (2’5”)
l: Overall length mm (ft.in) 1015 (3’4”) 1190 (3’11”) 1480 (4’10”) 1765 (5’9”) 1940 (6’4”)
Weight kg (lb) 150 (330) 240 (530) 420 (930) 600 (1,325) 1030 (2,270)
A: Max. working height mm (ft.in) 4585 (15’1”) 5575 (18’3”) 6770 (22’3”) 8545 (28’) 8965 (29’5”)
B: Max. working radius mm (ft.in) 5005 (16’5”) 6085 (20’) 6185 (20’4”) 8125 (26’8”) 9460 (31’)
PC100,
PC27R, PC45R, PC120/PC120LC, PC200/PC200LC,
PC35R, PC60,
PC40MR, PC130 & PC160LC, PC220/PC220LC &
Applicable base machine PC27MR, PC50MR, PC78MR, PC128US, PC230,
PC30MR, PC78US/PC78UU
PC58UU PC138US & PC228US
PC35MR PC128UU
Remarks:
An excessive stress may be applied to the arm depending on the type of work the machine engages in. It is requested, therefore,
to weld a reinforcing steel plate both on the upper and lower surfaces of the arm. For more information on the reinforcement of the
arm, see the operation and maintenance manual.
2G-18
Attachment Features and Specifications DEMOLITION
Rotary Grab
• Has 360º continuous rotating mechanism at the joint portions for the arm — able to grasp the
objects at various angles — suitable for work in restricted job sites.
• Can grasp objects more easily than similar devices which do not have 360º continuous rotating
mechanism and tilting mechanism
• Operator can get increased productivity with minimal fatigue.
• Through 360ºcontinuous rotation, it is easy to position the machine in relation to the object being
demolished and to work without moving the main body.
• Work can be done at the highest efficiency, whether in the vertical, horizontal or inclined
directions.
• Outstanding grasping force and lifting capacity.
• Easy compaction of loose and hollow scraps.
2G-19
Attachment Features and Specifications DEMOLITION
Underground Demolition Specifications
• A breaker and crusher for a one-class larger machine (PC200 class) can be installed.
• A regenerative circuit assures a hydraulic oil amount equal to that for one-class larger machine (PC200
class) in the crushing work.
• A two piece boom is adopted.
• A low height cab is installed, allowing the machine to pass under a 2.5 m (8’2”) high beam.
• Ring hooks for lifting the machine are installed as a standard equipment.
Traction force
increasing motor
Cab front guard,
Blade half height guard
Model
PC138US
Item
Machine weight kg (lb) 15030 (33,140)
Max. crusher weight kg (lb) 2420 (5,340)
KOMATSU
Engine model
SAA4D102E-2
Horsepower kW (HP)/rpm 66.2 (88.7)/2200
Max. digging height mm (ft.in) 8715 (28’7”)
Max. working height (at arm top pin) mm (ft.in) 6200 (20’4”)
Max. digging depth mm (ft.in) 4060 (13’4”)
Max. digging reach mm (ft.in) 7735 (25’5”)
Work equipment min. swing radius mm (ft.in) 3625 (11’11”)
Tail swing radius mm (ft.in) 1595 (5’3”)
Cab height mm (ft.in) 2465 (8’1”)
Overall length (in transport) mm (ft.in) 4580 (15’0”)
Overall height (in transport) mm (ft.in) 2580 (8’6”)
Overall width mm (ft.in) 2490 (8’2”)
Standard shoe width mm (in) 500 (20”)
2G-20
SECTION 2H
SCRAP & MATERIAL
HANDLING
CONTENTS
Attachments for industry:
Lifting magnet ...................................................... 2H-2
Car scrap handler ................................................ 2H-2
Scrap handling machine ..................................... 2H-3
Mobile power shear ............................................. 2H-4
Scrap grapple ....................................................... 2H-5
Orange grapple .................................................... 2H-5
Magnet fork .......................................................... 2H-5
High-mount cab ................................................... 2H-6
2H-1
Attachments for SCRAP & MATERIAL
Industry HANDLING
Lifting Magnet
• Lifting magnet with strong attraction force by
over-excitation and swift release by reverse
excitation.
• Engine-driven brushless alternator, realizing a
maintenance free operation.
• Comfortable cab of minimum vibration, which
makes an operator least tired even with long
hours of operation.
• A variety of cabs now available.
(A parallel link cab and high mount cab are
prepared as an option)
PC200LC
Wide shoe: option
2H-2
Attachments for SCRAP & MATERIAL
Industry HANDLING
Optional Equipment
Grapples Parallel Link Cab High Mount Cab
ORANGE
GRAPPLE
2H-3
Attachments for SCRAP & MATERIAL
Industry HANDLING
2H-4
Attachments for SCRAP & MATERIAL
Industry HANDLING
Scrap Grapple
To assure safe handling of massive or irregularly
shaped scrap, each of the 4 claws opens and closes
by independent hydraulic cylinders. The grapple
rotates freely to make grappling readjustments safe
and easy.
Orange Grapple
The claws are 4 vane-shaped blades operated
independently by hydraulic cylinders. The freely
turn-able grapple surrounds the scrap material;
grasps accurately, and keeps small-item spillage to a
minimum.
Magnet Fork
An excavator-based machine with a lifting magnet
and fork device exhibits the best operating
performance in scrap handlings by itself through the
combination of both the MAGNET absorbing and
FORK grapple forces, thus enabling great
improvement of working efficiency, because
materials to be handled can be freely selected.
SPECIFICATIONS
Model PC200LC PC220LC
Operating weight kg (lb) 23660 (52,160) 28140 (62,040)
Magnet outer diameter mm (ft.in) Ø1120 (3'8") Ø1320 (4'4")
Alternator output kW 10 15
2H-5
Attachments for SCRAP & MATERIAL
Industry HANDLING
High-mount Cab
A high-mount cab provides the operator with wider and clearer field view, thus facilitating loading or unloading
of scrap on or off a truck and charging or discharging into or out of scrap processing machines. The hydraulic
elevating cab lowered ensures better transportability.
FIXED TYPE HIGHT-MOUNT CAB OUTLINE DRAWING
PC300LC
The high mount cab can be installed on the LC type, too, such as PC200LC and PC300LC.
2H-6
SECTION 2J
SPECIAL APPLICATION
MACHINES
CONTENTS
Forest industries
Tilting cab excavator ............................................2J-2
Tower yarder .........................................................2J-2
Marine-harbor works
Aqua-digger (Backhoe type specs) ....................2J-3
2J-1
Forest Industries SPECIAL APPLICATION
MACHINES
PC78US-5
Working Example
Tilt Angle
Tower Yarder
An excavator-based yarding machine with a winch, called TOWER YARDER, features an excellent
controllability and high mobility. It also ensures easy operation without requiring any sub-wire ropes and
skylines, thus enabling great improvement of job efficiency in timber yarding.
2J-2
Marine-harbor Works SPECIAL APPLICATION
MACHINES
PC1800
PC3000
2J-3
Marine-harbor Works SPECIAL APPLICATION
MACHINES
PC3000
Boom length m 12.0 12.0 12.0 15.0
Arm length m 5.0 7.0 8.5 5.0
Bucket capacity m3
SAE (CECE) heaped 11.0 (10.0) 9.0 (8.1) 8.5 (7.6) 6.1 (5.6)
struck 8.5 7.0 6.6 4.7
A: Max. digging depth m 14.0 16.0 17.2 16.0
B: Max. digging depth of out for 7m m 12.9 15.0 16.3 15.0
C: Turn radius m 10.5 10.5 10.5 11.5
D: Max. dumping height m 6.2 4.2 3.0 9.2
kN 680 700 400 760
Max. bucket digging force
(ton) (69.4) (71.4) (40.8) (77.5)
kN 570 455 400 600
Max. arm crowd force
(ton) (58.1) (46.4) (40.8) (61.2)
Estimated hourly production m3/h 464 385 360 256
2J-4
CONTENTS
INDEX
SECTION 3
WHEEL LOADERS Sec 3A
WHEEL DOZERS Sec 3B
TOWING TRACTORS Sec 3C
(FOR AIRPLANE)
SECTION 3A
WHEEL LOADERS
CONTENTS
Features .................................................................... 3A-2
Specifications ......................................................... 3A-12
Performance data, dimensions ............................. 3A-22
Performance curves, travel time charts ............. 3A-106
Definitions ............................................................ 3A-113
Attachment availability ........................................ 3A-116
Bucket features .................................................... 3A-121
Teeth features ....................................................... 3A-122
Bucket selection .................................................. 3A-123
Teeth selection ..................................................... 3A-137
Fork equipment features ..................................... 3A-140
Log-loader operations ......................................... 3A-142
Lumber grapple specifications ........................... 3A-143
Dumping fork specifications ............................... 3A-144
Lumber fork specifications ................................. 3A-145
Log grapple specifications ................................. 3A-146
Logger performance ............................................ 3A-148
High lift boom specifications .............................. 3A-155
Tire availability ..................................................... 3A-156
Wheel loader and dump truck combination ...... 3A-159
Production, loading ............................................. 3A-163
3A-1
Features WHEEL LOADERS
AVANCE Series
Excellent productivity
• Dual hydraulic speed system to reduce cycle time
(WA320-WA900, except WA320-3 CUSTOM, FAST
WA800-3)
• VOHS (Variable Output Hydraulic System) to
reduce cycle time (WA1200) SLOW
• High capacity engine with power to spare
The powerful Komatsu engine provides fuel-
efficient operation.
FLW00001
FVBH0323
FLW00004
Frame
FLW00008
FLW00052
The parking brake prevents the entry of dirt or Transmission output shaft
dust and reduced wear to make the parking brake
maintenance free.
Disc
(wet type multiple disc)
FLW00009
• Electric display panel one unit with steering
column
[Main monitor] [Maintenance monitor]
The main monitor and the maintenance monitor
(EDIMOS II) are neatly arranged on the
instrument panel for a quick, clear reading of
machine functions at all times.
3A-3
Features WHEEL LOADERS
AVANCE Series
Dependable and high-performance
components
• High-rigidity frames
Front and rear frames are made as one larger
loader class to provide high rigidity for the power
train and loader equipment.
The high-rigidity frames, together with the
reinforced loader linkage for resist loading stress
and shock.
Accumulator
Two independent fully hydraulic brake lines are Brake
used for the brake control system.
Accumulator
charging valve
• High-quality paint
Most exterior plates are treated with a cation
electro-deposition undercoat and melamine
baked final paint for rust resistance and longer To PPC valve
service life. Hydraulic pump Brake
In addition, some exterior components employ FLW00012
resin.
surfaces. FVBH0324
3A-4
Features WHEEL LOADERS
GALEO Series
High productivity and low fuel
consumption
• Dual-mode engine power select system
• This wheel loader offers two selectable
operating modes-Normal and Power.
• E mode: This mode provides maximum fuel
efficiency for most of general loading.
• P mode: This mode provides maximum
power output for hard digging operation or
hill climb.
(WA380-6, WA430-5, WA470-5, WA500-6 and
WA600-6)
• Automatic transmission mode select
system
This operator controlled system allows the
operator to select manual shifting or three levels
of automatic shifting (low, medium, and high).
(WA380-6, WA430-5, WA470-5, WA500-6 and
WA600-6)
• New dual-speed hydraulic system
Komatsu's dual-speed hydraulic system
increases operational efficiency by matching the
hydraulic demands to work conditions.
(Except WA150 – WA320, WA380-6, WA500-6
and WA600-6)
• Maximum dumping clearance and reach 40˚
The long lift arms provide high dumping
clearances and maximum dumping reach. The
operator can even level loads on the body of a
dump truck easily and efficiently.
• Long wheelbase/articulation angle of 40º
The widest tread in class and the long wheelbase
provide improved machine stability in both
longitudinal and lateral directions. Since the
articulation angle is 40º, the operator can work
efficiently even in the tightest job sites.
• Low fuel consumption
The fuel consumption is reduced greatly because
of the low-noise, high-torque engine and the
large-capacity torque converter with maximum
efficiency in the low-speed range.
Increased reliability
• Wet multi-disc brakes and fully hydraulic
braking system mean lower maintenance costs
and higher reliability. Wet disc brakes are fully
sealed. Contaminants are kept out, reducing wear
and resulting maintenance.
Brakes require no adjustments for wear, meaning
even lower maintenance. The new parking brake
is also an adjustment-free, wet multi-disc for high
reliability and long life.
3A-5
Features WHEEL LOADERS
GALEO Series
• Hi-rigidity frames
The front and rear frames have high rigidity to
bear twisting and bending loads applied
repeatedly to the loader body.
• Flat face-to-face O-ring seals
Flat face-to-face O-ring seals are used to
securely seal all hydraulic hose connections and
to prevent oil leakage. In addition, buffer rings
are installed to the head side of the all-hydraulic
cylinders to lower the load on the rod seals and
maximize the reliability.
buffer rings
dust seal
rod packing
• Komatsu components
Komatsu manufactures the engine, torque Torque converter
converter, transmission, hydraulic units, electric
parts, and even each bolt on this wheel loader.
• Cathion Electrodeposition primer paint/
powder coating final paint
Cathion electrodeposition paint is applied as a
primer paint and powder coating is applied as
topcoat to the exterior metal sheet parts. Transmission Engine
Front axle Rear axle
• Sealed DT connectors
Main harnesses and controller connectors are
equipped with sealed DT connectors providing
high reliability, water resistance and dust
resistance.
FVW00925
3A-6
Features WHEEL LOADERS
GALEO Series
Easy & comfortable operation
• Automatic transmission with ECMV
• Kick-down switch
With the touch of a finger, the kick-down switch
automatically down shifts from second to first
when beginning the digging cycle. Transmission controller
FZW00949
• Low-noise design
The large cab is mounted with Komatsu's unique
ROPS/FOPS viscous mounts. The low-noise Floor
engine, hydraulically driven fan, and hydraulic
pumps are mounted with rubber cushions, and Rubber
the cab sealing is improved to provide a quiet,
low-vibration, dustproof with pressurizing, and Frame
comfortable operating environment.
3A-7
Features WHEEL LOADERS
GALEO Series
Electronically-Controlled HST Using a Transfer case
efficiency and high tractive effort. Engine power is Engine Piston Pump
transmitted hydraulically to transfer case, then To differentials
manually out to the differentials and out to the High speed
piston
four driving wheels. motor
• HST provides quick travel response and
aggressive drive into the pile. The variable
displacement system automatically adjusts to the • As the machine moves and gains ground speed,
tractive effort demand to provide maximum power the torque demand decreases and the low speed
and efficiency. motor is effectively removed from the drive
• Full auto-shifting eliminates any gear shifting and system by a clutch. At this point, the flow is going
kick-down operation to allow the operator to to the high-speed motor and the low-speed motor
concentrate on digging and loading. is not causing a drag on the system.
• When high drive torque is needed for digging, • An inching pedal gives the operator excellent
climbing or initiating movement, the pump feeds simultaneous control of his travel and equipment
both motors. This combination makes the loader hydraulic speeds. By depressing the inching
very aggressive and quick. pedal, drive pump flow to the motors will
• Under deceleration, the HST system acts as a decrease, reducing ground speed and allowing
dynamic brake on the mechanical drive system. the operator to use his accelerator to increase
The dynamic brake can hold the loader in position flow to his equipment hydraulics. Depressing the
on most workable slopes. This can be an inching pedal further will activate the service
advantage in stockpiling and ramp loading. brakes.
0 4 8 12 16 20 km/h
0 2 4 6 8 10 12 MPH
Travel speed
3A-8
Features WHEEL LOADERS
GALEO Series
Traction Control System
In limited traction situations where the operator
would like to avoid tire slippage (such as sandy or
wet surface operations), he can automatically
reduce slippage by activating the traction control
feature. Putting the traction control switch in the
"ON" position limits the maximum amount of tractive
effort.
Reduced
Tractive effort
0 4 8 12 16 20 km/h
0 2 4 6 8 10 12 MPH
Travel speed
(WA150, WA200/PT, WA250/PT, WA320-5)
3A-9
Features WHEEL LOADERS
GALEO Series
Variable displacement piston pump & CLSS
New design variable displacement piston pump
combined with the Closed-center Load Sensing
System delivers hydraulic flow just as the job
requires preventing wasted hydraulic pressure.
Minimized waste loss contributes to better fuel
economy.
• New Variable Displacement Piston Pump: The
pump delivers only necessary amounts Pu mp Val ve Pu m p V a lv e
minimizing waste loss. Quick Quick
movement movement
Feedback Disposed
(WA600-6)
3A-10
Features WHEEL LOADERS
Internet
Personal
computer terminal
WebCARE Server (for downloading
Komatsu data)
distributors
Merits of Using VHMS
Diagnosis
• Machine health information that used to take approximately 1 hour to be measured can now be
downloaded by personal computer in approximately 10 minutes, shortening the vehicle's down time.
• Furthermore, if the satellite communications function is equipped, the machine information can be
gathered without stopping the vehicle at all. (Not available in some regions.)
Recommendation
• An appropriate recommendation can be made by viewing these data over the Internet.
• Proper driving methods
• Formulation of maintenance plans in advance that suit the customer's production schedule.
Customer's Benefit
• Sudden break down can be prevented through utilization of data trend (change over time).
• Ascertaining the facts and searching for the cause of the breakdown are simplified, thus enabling
problems to be resolved quickly.
• Down time can be shortened by the systematic use of Reman components.
• Machine life can be extended significantly by proper operation and proper maintenance.
3A-11
Specifications WHEEL LOADERS
Model
WA200PT-5 WA250-5 WA250PT-5 WA320-5
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 92 (123)/2000 101 (135)/2000 101 (135)/2000 124 (166)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 4.0-13.0 (2.5-8.1)** 3.6-11.7 (2.2-7.3)** 3.6-11.7 (2.2-7.3)** 4.0-13.0 (2.5-8.1)**
2nd 13.0 (8.1) 11.7 (7.3) 11.7 (7.3) 13.0 (8.1)
3rd 20.0 (12.4) 16.2 (10.1) 16.2 (10.1) 18.0 (11.2)
4th 34.5 (21.4) 34.2 (21.2) 34.2 (21.2) 38.0 (23.6)
Reverse 1st 4.0-13.0 (2.5-8.1)** 3.6-11.7 (2.2-7.3)** 3.6-11.7 (2.2-7.3)** 4.0-13.0 (2.5-8.1)**
2nd 13.0 (8.1) 11.7 (7.3) 11.7 (7.3) 13.0 (8.1)
3rd 20.0 (12.4) 16.2 (10.1) 16.2 (10.1) 18.0 (11.2)
4th 34.5 (21.4) 34.2 (21.2) 34.2 (21.2) 38.0 (23.6)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D102E SAA6D102E SAA6D102E SAA6D102E
No. of cylinders- mm (in) 6-102 × 120 6-102 × 120 6-102 × 120 6-102 × 120
bore × stroke (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 5.88 (359)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 175 (46.2) 184 (48.6) 184 (48.6) 228 (60.2)
3A-12
Specifications WHEEL LOADERS
Model WA320-3 q
Item CUSTOM WA380-6 WA380-5 WA380-3
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 143 (192)/2100
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 142 (191)/2100
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 114 (153)/2350 133 (179)/2100 140 (187)/2000 140 (187)/2200
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.5 (4.7) 6.0 (3.7) 6.3 (3.9) 7.1 (4.4)
2nd 12.0 (7.5) 10.6 (6.7) 11.4 (7.1) 11.4 (7.1)
3rd 21.0 (13.0) 18.6 (11.6) 20.2 (12.6) 20.2 (12.6)
4th 34.0 (21.1) 31.1 (19.3) 31.5 (19.6) 31.5 (19.6)
Reverse 1st 7.8 (4.8) 6.5 (4.0) 6.7 (4.2) 7.4 (4.6)
2nd 12.5 (7.8) 11.3 (7.0) 11.8 (7.3) 11.8 (7.3)
3rd 22.0 (13.7) 20.2 (12.6) 21.0 (13.0) 21.0 (13.0)
4th 35.0 (21.7) 34.0 (21.1) 32.5 (20.2) 32.5 (20.2)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D102E SAA6D107E SAA6D114E S6D108
No. of cylinders- mm (in) 6-102 × 120 6-107 × 124 6-114 × 135 6-108 × 130
bore × stroke (4.02 × 4.72) (4.21 × 4.88) (4.49 × 5.31) (4.25 × 5.12)
Piston displacement ltr. (cu.in) 5.88 (359) 6.69 (408) 8.27 (505) 7.15 (436)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 200 (52.8) 300 (79.3) 300 (79.3) 287 (75.8)
Model qWA470-6
WA420-3 WA430-5 WA470-5
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 204 (273)/2000
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 203 (272)/2000
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 162 (217)/2200 162 (217)/2000 191 (256)/2000 195 (261)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.3 (3.9) 6.6 (4.1) 5.8 (3.6) 5.8 (3.6)
2nd 11.7 (7.3) 11.5 (7.1) 11.2 (7.0) 11.2 (7.0)
3rd 20.5 (12.7) 20.4 (12.7) 20.2 (12.6) 20.2 (12.6)
4th 32.8 (20.4) 33.2 (20.6) 33.1 (20.6) 33.1 (20.6)
Reverse 1st 6.6 (4.1) 7.1 (4.4) 6.1 (3.8) 6.1 (3.8)
2nd 12.2 (7.6) 12.3 (7.6) 11.9 (7.4) 11.9 (7.4)
3rd 21.2 (13.2) 21.6 (13.4) 21.4 (13.3) 21.4 (13.3)
4th 33.9 (21.1) 34.9 (21.7) 34.7 (21.6) 34.7 (21.6)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D108 SAA6D125E SAA6D125E-5 SAA6D125E
No. of cylinders- mm (in) 6-108 × 130 6-125 × 150 6-125 × 150 6-125 × 150
bore × stroke (4.25 × 5.12) (4.92 × 5.91) (4.92 × 5.91) (4.92 × 5.91)
Piston displacement ltr. (cu.in) 7.15 (436) 11.04 (674) 11.04 (674) 11.04 (674)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 320 (84.5) 343 (90.6) 413 (109.1) 390 (103.0)
3A-13
Specifications WHEEL LOADERS
Model q q
WA470-3 WA480-6 WA480-5 WA500-6
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 224 (300)/2000 266 (357)/1900
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 223 (299)/2000 263 (353)/1900
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 194 (260)/2200 211 (283)/2000 202 (271)/2000 248 (332)/1900
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.2 (3.9) 6.3 (3.9) 6.3 (3.9) 7.7 (4.8)
2nd 11.2 (7.0) 12.2 (7.6) 12.1 (7.5) 12.5 (7.8)
3rd 19.8 (12.3) 21.7 (13.5) 21.6 (13.4) 22.3 (13.9)
4th 31.5 (19.6) 34.5 (21.4) 34.3 (21.3) 34.9 (21.7)
Reverse 1st 6.4 (4.0) 6.6 (4.1) 6.6 (4.1) 8.6 (5.3)
2nd 11.7 (7.3) 12.9 (8.0) 12.8 (8.0) 13.0 (8.1)
3rd 20.7 (12.9) 22.9 (14.2) 22.8 (14.2) 24.8 (15.4)
4th 32.7 (20.3) 35.6 (22.1) 35.8 (22.2) 37.5 (23.3)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D125 SAA6D125E-5 SAA6D125E SAA6D140E-5
No. of cylinders- mm (in) 6-125 × 150 6-125 × 150 6-125 × 150 6-140 × 165
bore × stroke (4.92 × 5.91) (4.92 × 5.91) (4.92 × 5.91) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 11.04 (674) 11.04 (674) 11.04 (674) 15.24 (930)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 400 (105.7) 413 (109.1) 417 (110.2) 473 (124.9)
Model qWA600-6
WA500-3 WA600-3 WA600-3**
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 396 (530)/1800
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 393 (527)/1800
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 235 (315)/2100 374 (502)/1900 357 (478)/2000 357 (478)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.7 (4.2) 6.7 (4.2) 6.4 (4.0) 6.4 (4.0)
2nd 12.0 (7.5) 11.7 (7.3) 11.1 (6.9) 11.1 (6.9)
3rd 20.2 (12.6) 20.3 (12.6) 18.8 (11.7) 18.8 (11.7)
4th 33.0 (20.5) 33.8 (21.0) 30.3 (18.8) 30.3 (18.8)
Reverse 1st 7.5 (4.7) 7.3 (4.5) 7.1 (4.4) 7.1 (4.4)
2nd 13.4 (8.3) 12.8 (8.0) 12.2 (7.6) 12.2 (7.6)
3rd 22.5 (14.0) 22.0 (13.7) 20.5 (12.7) 20.5 (12.7)
4th 36.1 (22.4) 37.0( 23.0) 32.7 (20.3) 32.7 (20.3)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 43 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D140E SAA6D170E-5 SAA6D170E SAA6D170E
No. of cylinders- mm (in) 6-140 × 165 6-170 × 170 6-170 × 170 6-170 × 170
bore × stroke (5.51 × 6.50) (6.69 × 6.69) (6.69 × 6.69) (6.69 × 6.69)
Piston displacement ltr. (cu.in) 15.24 (930) 23.15 (1413) 23.15 (1413) 23.15 (1413)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 450 (118.9) 718 (189.7) 670 (177) 670 (177)
3A-14
Specifications WHEEL LOADERS
Model
WA600-3*** WA600-3*4 WA700-3 WA700-3**
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 357 (478)/2000 357 (478)/2000 502 (672)/2000 502 (672)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.4 (4.0) 6.4 (4.0) 6.4 (4.0) 6.4 (4.0)
2nd 11.1 (6.9) 11.1 (6.9) 11.1 (6.9) 11.1 (6.9)
3rd 18.8 (11.7) 18.8 (11.7) 18.7 (11.6) 18.7 (11.6)
4th 30.3 (18.8) 30.3 (18.8) 30.0(18.6) 30.0(18.6)
Reverse 1st 7.1 (4.4) 7.1 (4.4) 7.1 (4.4) 7.1 (4.4)
2nd 12.2 (7.6) 12.2 (7.6) 12.3 (7.6) 12.3 (7.6)
3rd 20.5 (12.7) 20.5 (12.7) 20.5 (12.7) 20.5 (12.7)
4th 32.7 (20.3) 32.7 (20.3) 32.3 (20.1) 32.3 (20.1)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D170E SAA6D170E SAA6D170E SAA6D170E
No. of cylinders- mm (in) 6-170 × 170 6-170 × 170 6-170 × 170 6-170 × 170
bore × stroke (6.69 × 6.69) (6.69 × 6.69) (6.69 × 6.69) (6.69 × 6.69)
Piston displacement ltr. (cu.in) 23.15 (1413) 23.15 (1413) 23.15 (1413) 23.15 (1413)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 670 (177) 670 (177) 1100 (290.6) 1100 (290.6)
Model
WA800-3 WA800-3** WA800-3*** WA900-3
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 603 (808)/2000 603 (808)/2000 603 (808)/2000 637 (853)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.0 (4.3) 7.0 (4.3) 7.0 (4.3) 7.0 (4.3)
2nd 12.3 (7.6) 12.3 (7.6) 12.3 (7.6) 12.3 (7.6)
3rd 28.0 (17.4) 28.0 (17.4) 28.0 (17.4) 28.0 (17.4)
4th
Reverse 1st 7.1 (4.4) 7.1 (4.4) 7.1 (4.4) 7.1 (4.4)
2nd 12.4 (7.7) 12.4 (7.7) 12.4 (7.7) 12.4 (7.7)
3rd 28.3 (17.6) 28.3 (17.6) 28.3 (17.6) 28.3 (17.6)
4th
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA12V140 SA12V140 SA12V140 SA12V140
No. of cylinders- mm (in) 12-140 × 165 12-140 × 165 12-140 × 165 12-140 × 165
bore × stroke (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 30.5 (1,861) 30.5 (1,861) 30.5 (1,861) 30.5 (1,861)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 1425 (376.5) 1425 (376.5) 1425 (376.5) 1430 (377.8)
3A-15
Specifications WHEEL LOADERS
Model
WA900-3** WA1200-3 WA1200-3**
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 637 (853)/2000 1165 (1560)/1900 1165 (1560)/1900
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 7.0 (4.3) 6.3 (3.9) 6.3 (3.9)
2nd 12.3 (7.6) 11.5 (7.1) 11.5 (7.1)
3rd 28.0 (17.4) 19.8 (12.3) 19.8 (12.3)
4th
Reverse 1st 7.1 (4.4) 7.4 (4.6) 7.4 (4.6)
2nd 12.4 (7.7) 13.4 (8.3) 13.4 (8.3)
3rd 28.3 (17.6) 22.6 (14.0) 22.6 (14.0)
4th
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU CUMMINS CUMMINS
SA12V140 QSK60 QSK60
No. of cylinders- mm (in) 12-140 × 165 16-159 × 190 16-159 × 190
bore × stroke (5.51 × 6.50) (6.26 × 7.48) (6.26 × 7.48)
Piston displacement ltr. (cu.in) 30.5 (1,861) 60.2 (3,674) 60.2 (3,674)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 1430 (377.8) 5100 (1,347) 5100 (1,347)
3A-16
Specifications WHEEL LOADERS
Model
WA250PT-5*4 WA320-5*4 WA320PT-5*4 qWA380-6*4
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 143 (192)/2100
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 142 (191)/2100
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 100 (134)/2000 124 (166)/2000 124 (166)/2000 133 (179)/2100
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 6.5 (4.0)
2nd 13.0 (8.1) 13.0 (8.1) 13.0 (8.1) 11.3 (7.0)
3rd 18.0 (11.2) 18.0 (11.2) 18.0 (11.2) 19.9 (12.4)
4th 38.0 (23.6) 38.0 (23.6) 38.0 (23.6) 33.0 (20.5)
Reverse 1st 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 7.1 (4.4)
2nd 13.0 (8.1) 13.0 (8.1) 13.0 (8.1) 12.3 (7.6)
3rd 18.0 (11.2) 18.0 (11.2) 18.0 (11.2) 21.5 (13.4)
4th 38.0 (23.6) 38.0 (23.6) 38.0 (23.6) 35.5 (22.1)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D102E SAA6D102E SAA6D102E SAA6D107E
No. of cylinders- mm (in) 6-102 × 120 6-102 × 120 6-102 × 120 6-107 × 124
bore × stroke (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.21 × 4.88)
Piston displacement ltr. (cu.in) 5.88 (359) 5.88 (359) 5.88 (359) 6.69 (408)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 184 (48.6) 228 (60.2) 228 (60.2) 300 (79.3)
3A-17
Specifications WHEEL LOADERS
Model
WA400-5*4 WA450-5*4 WA480-5*4 q
WA500-6*5
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM 266 (359)/1900
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM 263 (353)/1900
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 149 (200)/2200 195 (261)/2000 202 (271)/2000 248 (332)/1900
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.8 (4.2) 6.3 (3.9) 6.3 (3.9) 7.7 (4.8)
2nd 12.3 (7.6) 12.1 (7.5) 12.1 (7.5) 12.5 (7.8)
3rd 21.4 (13.3) 21.7 (13.5) 21.6 (13.4) 22.3 (13.9)
4th 34.0 (21.1) 34.9 (21.7) 34.3 (21.3) 34.9 (21.7)
Reverse 1st 7.3 (4.5) 6.7 (4.2) 6.6 (4.1) 8.6 (5.3)
2nd 12.8 (8.0) 12.8 (8.0) 12.8 (8.0) 13.0 (8.1)
3rd 22.6 (14.0) 23.0 (14.3) 22.8 (14.2) 24.8 (15.4)
4th 35.0 (21.7) 36.0 (2.4) 35.8 (22.2) 37.5 (23.3)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E SAA6D125E SAA6D125E SAA6D140E-5
No. of cylinders- mm (in) 6-114 × 135 6-125 × 150 6-125 × 150 6-140 × 165
bore × stroke (4.49 × 5.31) (4.92 × 5.91) (4.92 × 5.91) (5.51 × 6.50)
Piston displacement ltr. (cu.in) 8.27 (505) 11.04 (674) 11.04 (674) 15.24 (930)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 300 (79.3) 390 (103) 417 (110.2) 473 (124.9)
3A-18
Specifications WHEEL LOADERS
Model
WA100M-5*6 WA115-3*6 WA150PZ-5*6 WA200-5*6
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 61.5 (82.4)/2350 65 (87)/2200 71 (95)/2000 92 (123)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.6 (4.1) 7.0 (4.3) 5.0-13.6 (3.1-8.5)** 4.4-14.3 (2.7-8.9)**
2nd 30.0(18.6) 20.0 (12.4) 13.6 (8.5) 14.3 (8.9)
3rd 21.0 (13.0) 22.0 (13.7)
4th 39.0 (24.2) 38.0 (23.6)
Reverse 1st 6.6 (4.1) 7.0 (4.3) 5.0-13.6 (3.1-8.5)** 4.4-14.3 (2.7-8.9)**
2nd 30.0(18.6) 20.0 (12.4) 13.6 (8.5) 14.3 (8.9)
3rd 21.0 (13.0) 22.0 (13.7)
4th 39.0 (24.2) 38.0 (23.6)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 38.5 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S4D95LE-3 S4D106-1HC SAA4D102E SAA6D102E
No. of cylinders- mm (in) 4-95 × 115 4-106 × 125 4-102 × 120 6-102 × 120
bore × stroke (3.74 × 4.53) (4.17 × 4.92) (4.02 × 4.72) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 3.3 (201) 4.412 (269) 3.9 (238) 5.88 (359)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 110 (29.1) 120 (31.7) 133 (35.1) 175 (46.2)
3A-19
Specifications WHEEL LOADERS
Model
WA200PT-5*6 WA250-5*6 WA320-5*6 WA380-5*6
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 92 (123)/2000 101 (135)/2000 124 (166)/2000 140 (187)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 4.4-14.3 (2.7-8.9)** 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 6.8 (4.2)
2nd 14.3 (8.9) 13.0 (8.1) 13.0 (8.1) 12.3 (7.6)
3rd 22.0 (13.7) 18.0 (11.2) 18.0 (11.2) 22.6 (14.0)
4th 38.0 (23.6) 38.0 (23.6) 38.0 (23.6) 38.3 (23.9)
Reverse 1st 4.4-14.3 (2.7-8.9)** 4.0-13.0 (2.5-8.1)** 4.0-13.0 (2.5-8.1)** 7.3 (4.5)
2nd 14.3 (8.9) 13.0 (8.1) 13.0 (8.1) 12.8 (8.0)
3rd 22.0 (13.7) 18.0 (11.2) 18.0 (11.2) 23.9 (14.9)
4th 38.0 (23.6) 38.0 (23.6) 38.0 (23.6) 39.4 (24.5)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D102E SAA6D102E SAA6D102E SAA6D114E
No. of cylinders- mm (in) 6-102 × 120 6-102 × 120 6-102 × 120 6-114 × 135
bore × stroke (4.02 × 4.72) (4.02 × 4.72) (4.02 × 4.72) (4.49 × 5.31)
Piston displacement ltr. (cu.in) 5.88 (359) 5.9 (360) 5.9 (360) 8.27 (505)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 175 (46.2) 181 (47.8) 228 (60.2) 300 (79.3)
Model
WA430-6*6 WA470-5*6 WA480-5*6 WA500-3*6
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 173 (232)/2000 195 (261)/2000 202 (271)/2000 235 (315)/2100
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.8 (4.2) 6.3 (3.9) 6.3 (3.9) 7.1 (4.4)
2nd 12.4 (7.7) 12.1 (7.5) 12.1 (7.5) 12.6 (7.8)
3rd 21.5 (13.4) 22.8 (14.2) 22.6 (14.0) 21.2 (13.2)
4th 35.0 (21.7) 39.7 (24.7) 39.6 (24.6) 34.8 (21.6)
Reverse 1st 7.3 (4.5) 6.7 (4.2) 6.6 (4.1) 7.9 (4.9)
2nd 12.9 (8.0) 12.8 (8.0) 12.8 (8.0) 14.1 (8.8)
3rd 22.7 (14.1) 24.7 (15.3) 23.8 (14.8) 23.5 (14.6)
4th 36.0 (22.4) 40.9 (25.4) 41.3 (25.7) 38.1 (23.7)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E-2 SAA6D125E SAA6D125E SA6D140E
No. of cylinders- mm (in) 6-114 × 135 6-125 × 150 6-125 × 150 6-140 × 165
bore × stroke (4.49 × 5.31) (4.92 × 5.91) (4.92 × 5.91) (5.51 × 6.5)
Piston displacement ltr. (cu.in) 8.27 (505) 11.04 (674) 11.4 (674) 15.24 (930)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 300 (79.3) 390 (103.0) 417 (110.2) 460 (121.5)
3A-20
Specifications WHEEL LOADERS
Model
WA500-3*7 WA600-3*7
Item
OPERATING WEIGHT* kg (lb)
HORSEPOWER (SAE) SAE J1995 Gross kW (HP)/RPM
ISO9249 /SAE J1349 Net (at min. fan speed) kW (HP)/RPM
ISO9249 /SAE J1349 Net (at max. fan speed) kW (HP)/RPM 235 (315)/2100 327 (439)/2000
BUCKET CAPACITY* m3 (cu.yd)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 6.7 (4.2) 7.4 (4.6)
2nd 12.0(7.5) 12.7 (7.9)
3rd 20.2 (12.6) 21.0 (13.0)
4th 33.0 (20.5) 33.5 (20.8)
Reverse 1st 7.5 (4.7) 8.2 (5.1)
2nd 13.4 (8.3) 13.9 (8.6)
3rd 22.5 (14.0) 23.0 (14.3)
4th 36.1 (22.4) 35.2 (21.9)
Turning radius* mm (ft.in)
(Outside corner of bucket)
Articulation angle (each) degree 40 40
DIMENSIONS*: mm (ft.in)
ENGINE:
Model KOMATSU KOMATSU
S6D140E-2 SA6D170E
No. of cylinders- mm (in) 6-140 × 165 6-170 × 170
bore × stroke (5.51 × 6.50) (6.69 × 6.69)
Piston displacement ltr. (cu.in) 15.2 (930) 23.15 (1413)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 465 (122.9) 670 (177)
3A-21
Performance Data WHEEL LOADERS
Dimensions
WA30-5
Capacity Struck Bucket Breakout
Heaped m3 width mm force
m3(cu.yd) (cu.yd) (ft.in) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
0.4 0.3 1575 2700
(Loading and excavating of soil, sand and variety of (0.52) (0.39) (5'2") (5,950)
other commonly handled materials.)
Operating weight
kg (lb)
Tires/Bucket I
2575
12.5/70-16-6PR(L-2)
(5,680)
Unit: mm (ft.in)
Tires 12.5/70-16PR(L-2)
Tread 1180 (3'10")
45 Width over tires 1945 (5'9")
K J A Wheelbase 1750 (5'9")
B B Hinge pin height, max. height 2680 (8'10")
F
H C Hinge pin height, carry position
D Ground clearance 270 (10.6")
47
C D
E E Hitch height 750 (2'6")
10 F Overall height, ROPS canopy 2700 (8'10")
A
L
FVBH0007
3A-22
Performance Data WHEEL LOADERS
Dimensions
WA50-3
Capacity Struck Bucket Breakout Breakout
Heaped m3 width mm weight force
m3(cu.yd) (cu.yd) (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
0.6 0.5 1690 215 3050
(Loading and excavating of soil, sand and variety of
(0.78) (0.65) (5'7") (474) (6,720)
other commonly handled materials.)
Operating weight
kg (lb)
Tires/Bucket I
15.5/70-18-8PR(L-2) 3475
(7,660)
Unit: mm (ft.in)
Tires 12.5/70-16PR(L-2)
Tread 1180 (3'10")
45 Width over tires 1945 (5'9")
K J A Wheelbase 1750 (5'9")
B B Hinge pin height, max. height 2680 (8'10")
F
H C Hinge pin height, carry position
D Ground clearance 270 (10.6")
47
C D
E E Hitch height 750 (2'6")
10 F Overall height, ROPS canopy 2700 (8'10")
A
L
FVBH0007
3A-23
Performance Data WHEEL LOADERS
Dimensions
WA150-5
Unit: mm (ft.in)
16.9-24- 14.00-24- 15.5-25- 17.5-25-
10PR (L2) 12PR (L2) 8PR (L2) 12PR (L2)
Tread 1780 (5'10") 1780 (5'10") 1780 (5'10") 1780 (5'10")
45 Width over tires 2250 (7'5") 2185 (7'2") 2180 (7’2”) 2220 (7’3”)
K
J A Wheelbase 2600 (8'6") 2600 (8'6") 2600 (8'6") 2600 (8'6")
B B Hinge pin height, 3485 (11'5") 3510 (11'6") 3475 (11’5”) 3510 (11’6”)
H F G max. height
M
C Hinge pin height,
E 360 (1’2”) 355 (1’2”) 360 (1’2”) 355 (1’2”)
C D carry position
A D Ground clearance 400 (1'4") 425 (1'5") 390 (1’3”) 425 (1’5”)
L E Hitch height 800 (2'7") 825 (2'8") 790 (2’7”) 825 (2'8")
F Overall height,
2420 (7'11") 2445 (8'0”) 2410 (7’11”) 2445 (8'0”)
top of the stack
G Overall height,
3035 (9'11") 3060 (10'0") 3025 (9’11”) 3060 (10’0”)
ROPS cab
H See dumping
clearance below
M Tilt back angle 46°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground Change in
Operating Vertical
Straight Full Turn Tire Clearance Reach
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
14.00-24-12PR (L2) +130 +287 +95 +209 +85 +187 2185 7’2” 425 1’5” +25 +1.0” –25 –1.0”
15.5-25-8PR (L2) +10 +22 +10 +22 +5 +11 2180 7’2” 390 1’3” –10 –0.4” +10 +0.4”
17.5-25-12PR (L2) +150 +331 +110 +243 +95 +209 2220 7’3” 425 1’5” +25 +1.0” –25 –1.0”
Install ROPS canopy
–110 –243 –110 –243 –95 –209
(instead of cab)
Additional
+200 +441 +380 +838 +330 +728
counterweight
Air conditioner +70 +154 +80 +176 +70 +154
3A-24
Performance Data WHEEL LOADERS
Dimensions
WA200-5
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
Width over tires 2375 (7'10") 2470 (8’1”)
45
K A Wheelbase 2840 (9'4") 2840 (9'4")
J
B B Hinge pin height, max. height 3635 (11'11") 3705 (12’2”)
F G
H C Hinge pin height, carry position 410 (1’4”) 380 (1’3”)
M
E D Ground clearance 425 (1'5") 495 (1’8”)
C D
E Hitch height 870 (2'10") 940 (3'1")
A
L
F Overall height, top of the stack 2715 (8'11") 2785 (9'2”)
FVBH0030 G Overall height, ROPS cab 3110 (10'2") 3180 (10’5”)
H See dumping clearance below
M Tilt back angle 48°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground Change in
Operating Vertical
Straight Full Turn Tire Clearance Reach
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
17.5-25-12PR (L3) +105 +231 +80 +176 +70 +154 2375 7’10” 425 1’5” 0 0” 0 0”
20.5-25-12PR (L2) +450 +992 +240 +529 +220 +485 2470 8’1” 495 1’8” +70 +2.8” –75 –3.0”
20.5-25-12PR (L3) +665 +1,466 +355 +783 +320 +705 2470 8’1” 495 1’8” +70 +2.8” –75 –3.0”
Install ROPS canopy
–250 –551 –250 –551 –220 –485
(instead of cab)
Additional
+300 +661 +590 +1,301 +510 +1,124
counterweight
Air conditioner +70 +154 +60 +132 +50 +110
3A-25
Performance Data WHEEL LOADERS
Dimensions
WA200PT-5
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
45 Width over tires 2375 (7'10") 2470 (8’1”)
K
J A Wheelbase 2840 (9'4") 2840 (9'4")
B
F G
B Hinge pin height, max. height 3765 (12'4") 3835 (12’7”)
H
M C Ground clearance 425 (1’5”) 495 (1’8”)
C D
E D Hitch height 870 (2'10") 940 (3'1")
A
E Overall height, top of the stack 2715 (8'11") 2785 (9'2”)
L F Overall height, ROPS cab 3110 (10'2") 3180 (10’5”)
FVBH0030
M Tilt back angle 48°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Width Over Ground Change in Change in
Operating Vertical
Straight Full Turn Tire Clearance Reach
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
17.5-25-12PR (L3) +105 +231 +65 +143 +60 +132 2375 7’10” 425 1’5” 0 0” 0 0”
20.5-25-12PR (L2) +320 +705 +200 +441 +175 +386 2470 8’1” 495 1’8” +70 +2.8” –75 –3.0”
20.5-25-12PR (L3) +470 +1,036 +300 +661 +260 +573 2470 8’1” 495 1’8” +70 +2.8” –75 –3.0”
Install ROPS canopy
–250 –551 –215 –474 –185 –408
(instead of cab)
Air conditioner +70 +154 +50 +110 +45 +99
3A-26
Performance Data WHEEL LOADERS
Dimensions
WA250-5
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
Width over tires 2375 (7'10") 2470 (8’1”)
45
K A Wheelbase 2900 (9'6") 2900 (9'6")
J
B B Hinge pin height, max. height 3725 (12'3") 3795 (12’5”)
F G
H C Hinge pin height, carry position 375 (1’3”) 450 (1’6”)
M
E D Ground clearance 395 (1'4") 465 (1’6”)
C D
E Hitch height 880 (2'11") 950 (3'1")
A
L F Overall height, top of the stack 2665 (8'9") 2735 (9'0”)
FVBH0030
G Overall height, ROPS cab 3130 (10'3") 3200 (10’6”)
H See dumping clearance below
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground Change in
Operating Vertical
Straight Full Turn Tire Clearance Reach
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
17.5-25-16PR (L3) +55 +121 +45 +99 +35 +77 2375 7’10” 395 1’4” 0 0” 0 0”
20.5-25-12PR (L2) +280 +617 +215 +474 +190 +419 2470 8’1” 465 1’6” +70 +2.8” –70 –2.8”
20.5-25-12PR (L3) +430 +948 +325 +717 +280 +617 2470 8’1” 465 1’6” +70 +2.8” –70 –2.8”
Install ROPS canopy
–250 –551 –250 –551 –220 –485
(instead of cab)
Additional
+300 +661 +580 +1,279 +510 +1,124
counterweight
Air conditioner +70 +154 +50 +110 +40 +88
3A-27
Performance Data WHEEL LOADERS
Dimensions
WA250PT-5
Unit: mm (ft.in)
17.5-25 tires 20.5-25 tires
Tread 1930 (6'4") 1930 (6'4")
45 Width over tires 2375 (7'10") 2470 (8’1”)
K
J A Wheelbase 2900 (9'6") 2900 (9'6")
B
H F G B Hinge pin height, max. height 3895 (12'9") 3965 (13’0”)
M C Ground clearance 395 (1’4”) 465 (1’6”)
E
C D D Hitch height 880 (2'11") 950 (3'1")
A E Overall height, top of the stack 2665 (8'9") 2735 (9'0”)
L
FVBH0030 F Overall height, ROPS cab 3130 (10'3") 3200 (10’6”)
M Tilt back angle 47°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Width Over Ground Change in Change in
Operating Vertical
Straight Full Turn Tire Clearance Reach
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
17.5-25-16PR (L3) +55 +121 +35 +77 +30 +66 2375 7’10” 395 1’4” 0 0” 0 0”
20.5-25-12PR (L2) +225 +496 +140 +309 +120 +265 2470 8’1” 465 1’6” +70 +2.8” –70 –2.8”
20.5-25-12PR (L3) +375 +827 +235 +518 +205 +452 2470 8’1” 465 1’6” +70 +2.8” –70 –2.8”
Install ROPS canopy
–250 –551 –200 –441 –180 –397
(instead of cab)
Air conditioner +70 +154 +50 +110 +40 +88
3A-28
Performance Data WHEEL LOADERS
Dimensions
WA320-5
Unit: mm (ft.in)
Tread 2050 (6'9")
Width over tires 2585 (8'6")
A Wheelbase 3030 (9'11")
45
K B Hinge pin height, max. height 3905 (12'10")
J
B C Hinge pin height, carry position 480 (1’7”)
F G
H D Ground clearance 425 (1'5")
M
E E Hitch height 1095 (3'7")
C D
F Overall height, top of the stack 2775 (9'1")
A
L
G Overall height, ROPS cab 3200 (10'6")
H See dumping clearance below
M Tilt back angle 49°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-12PR (L2) –160 –353 –120 –265 –104 –229 2585 8’6” 425 1’5” 0 0”
Install ROPS canopy (instead of cab) –150 –331 –107 –236 –93 –205
Additional counterweight +520 +1,146 +1,010 +2,227 +880 +1,940
Air conditioner +70 +154 +90 +198 +80 +176
3A-29
Performance Data WHEEL LOADERS
Dimensions
WA320-3 CUSTOM
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
2.7 2.3 2740 1245 13050
(Loading and excavating of soil, sand and variety of
(3.53) (3.01) (9') (2,745) (28,770)
other commonly handled materials.)
2.5 1.95 2760 1125 14680
II General-purpose bucket with teeth
(3.0) (2.55) (9'1") (2,720) (32,360)
2.3 1.95 2740 1320 14010
III Excavating bucket with bolt-on cutting edges (3.0) (2.55) (9') (2,910) (30,890)
IV Excavating bucket with teeth (Loading and 2.1 1.8 2760 1210 15490
excavating of crushed rock and blasted rock.) (2.75) (2.35) (9'1") (2,670) (34,150)
V Light material bucket with bolt-on cutting edges; 3.2 2.8 2740 1430 10450
(A Lighter-weight, large-capacity bucket.) (4.2) (3.7) (9') (3,150) (23,040)
• All dimensions, weights and performance values based on SAE J-732c and J-742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab,and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab –310 (–683) –280 (–620) –245 (–540)
Install additional counterweight 325 kg (715 lb) +325 (+715) +830 (+1,830) +690 (+1,520)
Unit: mm (ft.in)
20.5-25 tires
Tread 2050 (6'9")
45 Width over tires 2585 (8'6")
K A Wheelbase 3030 (9'11")
J
B
F G B Hinge pin height, max. height 3885 (12'9")
H
M C Hinge pin height, carry position 450 (1'6")
E
C D D Ground clearance 400 (1'4")
A E Hitch height 1190 (3'11")
L
FVBH0030
F Overall height, top of the stack 3235 (10'6")
G Overall height, ROPS cab 3335 (10'11")
M Tilt back angle 48°
3A-30
Performance Data WHEEL LOADERS
Dimensions
WA380-6
Unit: mm (ft.in)
Tread 2160 (7'1")
Width over tires 2695 (8'10")
45
A Wheelbase 3300 (10'10")
K
J B Hinge pin height, max. height 4030 (13'3")
B
H F G C Hinge pin height, carry position 520 (1'8")
M D Ground clearance 390 (1'3")
E
C D E Hitch height 1085 (3'7")
A F Overall height, top of the stack 2885 (9'6")
L
FVBH0030 G Overall height, ROPS cab 3315 (10'11")
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Weight Straight Full Turn Tire Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-16PR (L3) 0 0 0 0 0 0 2,695 8’10” 390 1’3” 0 0”
23.5-25-16PR (L3) +970 +2,140 +770 +1,700 +680 +1,500 2,780 9’1” 455 1’6” +65 3”
Install additional counterweight +340 +750 +900 +1,985 +755 +1,655
3A-31
Performance Data WHEEL LOADERS
Dimensions
WA380-5
Unit: mm (ft.in)
Tread 2160 (7'1")
Width over tires 2695 (8'10")
45
A Wheelbase 3300 (10'10")
K
J B Hinge pin height, max. height 4030 (13'3")
B
H F G C Hinge pin height, carry position 520 (1'8")
M D Ground clearance 390 (1'3")
E
C D E Hitch height 1085 (3'7")
A F Overall height, top of the stack 2885 (9'6")
L
FVBH0030 G Overall height, ROPS cab 3315 (10'11")
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Weight Straight Full Turn Tire Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-16PR (L3) 0 0 0 0 0 0 2,695 8’10” 390 1’3” 0 0”
23.5-25-16PR (L3) +1080 +2,381 +740 +1,632 +650 +1,433 2,780 9’1” 460 1’6” +65 2.6”
Remove ROPS cab –660 –1,455 –650 –1,433 –625 –1,378
Install front/rear compartment +120 +265 +120 +265 +115 +254
Install additional counterweight +325 +717 +860 +1,896 +715 +1,577
3A-32
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (with high lift boom)
Unit: mm (ft.in)
Tread 2160 (7'1")
Width over tires 2695 (8'10")
45 A Wheelbase 3330 (10'10")
K
J B Hinge pin height, max. height 4500 (15'0")
B
H F G C Hinge pin height, carry position 685 (2’3”)
M D Ground clearance 390 (1'3")
E
C D E Hitch height 1085 (3'7")
A F Overall height, top of the stack 2885 (9'6")
L
FVBH0030 G Overall height, ROPS cab 3315 (10'15")
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-16PR (L3) 0 0 0 0 0 0 2695 8’10” 390 1’3” 0 0”
23.5-25-16PR (L3) +1080 +2,381 +740 +1,632 +650 +1,433 2780 9’1” 460 1’6” +65 +2.6”
Remove ROPS cab –660 –1,455 –650 –1,433 –625 –1,378
Install front/rear compartment +120 +265 +120 +265 +115 +254
Install additional counterweight +325 +717 +860 +1,896 +715 +1,577
3A-33
Performance Data WHEEL LOADERS
Dimensions
WA380-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
3.2 2.7 2905 1630 15100
(Loading and excavating of soil, sand and variety of
(4.2) (3.55) (9'6") (3,590) (33,300)
other commonly handled materials.)
3.0 2.6 2920 1560 16300
II General-purpose bucket with teeth
(3.9) (3.4) (9'7") (3,440) (36,000)
2.8 2.35 2905 1710 16600
III Excavating bucket with bolt-on cutting edges (3.65) (3.07) (9'6") (3,770) (36,600)
IV Excavating bucket with teeth (Loading and 2.6 2.2 2920 1640 18100
excavating of crushed rock and blasted rock.) (3.4) (2.9) (9'7") (3,620) (39,900)
V Light material bucket with bolt-on cutting edges; 4.0 3.4 2905 1830 13100
(A Lighter-weight, large-capacity bucket.) (5.25) (4.45) (9'6") (4,030) (28,900)
Operating weight
kg(lb)
Tires/Buckets I II III IV
20.5-25-16PR 16285 16215 16365 16295
(L-2) (3,5910) (35,755) (36,085) (35,930)
20.5-25-16PR 16480 16410 16560 16490
(L-3) (36,340) (36,185) (36,515) (36,360)
23.5-25-12PR 17030 16960 17110 17040
(L-2) (37,550) (37,400) (37,730) (37,575)
23.5-25-12PR 17335 17265 17415 17345
(L-3) (38,225) (38,070) (38,400) (38,250)
23.5-25-16PR 17070 17000 17150 17080
(L-2) (37,640) (37,485) (37,820) (37,660)
23.5-25-16PR 17445 17375 17525 17455
(L-3) (38,470) (38,315) (38,645) (38,490)
23.5-25-20PR 17135 17065 17215 17145
(L-2) (37,785) (37,630) (37,960) (37,805)
23.5-25-20PR 17445 17375 17525 17455
(L-3) (38,470) (38,315) (38,645) (38,490)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab –670 (–1,475) –610 (–1,345) –590 (–1,300)
Install additional counterweight 325 kg (715 lb) +325 (+715) +830 (+1,835) +690 (+1,520)
3A-34
Performance Data WHEEL LOADERS
Dimensions
WA380-3
Unit: mm (ft.in)
20.5-25 tires 23.5-25 tires
Tread 2160 (7'1") 2160 (7'1")
45 Width over tires 2695 (8'10") 2780 (9'1")
K A Wheelbase 3200 (10'6") 3200 (10'6")
J
B
F G B Hinge pin height, max. height 4030 (13'3") 4095 (13'5")
H
M C Hinge pin height, carry position 520 (1'8") 505 (1'8")
E
C D D Ground clearance 390 (1'3") 455 (1'6")
A E Hitch height 1085 (3'7") 1150 (3'9")
L
FVBH0030
F Overall height, top of the stack 3280 (10'9") 3345 (11')
G Overall height, ROPS cab 3315 (10'10") 3380 (11'1")
M Tilt back angle 48°
3A-35
Performance Data WHEEL LOADERS
Dimensions
WA420-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
3.7 3.2 3050 1740 18500
(Loading and excavating of soil, sand and variety of
(4.85) (4.2) (10') (3,840) (40,800)
other commonly handled materials.)
3.5 3.0 3070 1680 20000
II General-purpose bucket with teeth
(4.6) (3.9) (10'1") (3,700) (44,100)
3.3 2.8 3050 1830 19800
III Excavating bucket with bolt-on cutting edges (4.3) (3.65) (10') (4,030) (43,650)
IV Excavating bucket with teeth (Loading and 3.1 2.6 3070 1775 21600
excavating of crushed rock and blasted rock.) (4.05) (3.4) (10'1") (3,910) (47,620)
V Light material bucket with bolt-on cutting edges; 4.6 4.0 3050 1960 15500
(A Lighter-weight, large-capacity bucket.) (6.0) (5.25) (10') (4,320) (34,170)
VI Rock bucket with teeth ; (Spade nose). (Loading and 3.1 2.7 3050 1825 18100
excavating of blasted rock) (4.05) (3.55) (10') (4,020) (39,900)
Operating weight
kg(lb)
Tires/Buckets I II III IV
23.5-25-16PR 18220 18160 18310 18255
(L-2) (40,175) (40,045) (40,375) (40,255)
23.5-25-16PR 18590 18530 18680 18625
(L-3) (40,990) (40,860) (41,190) (41,070)
23.5-25-20PR 18280 18220 18370 18315
(L-2) (40,305) (40,175) (40,510) (40,385)
23.5-25-20PR 18595 18535 18685 18630
(L-3) (41,000) (40,870) (41,200) (41,080)
26.5-25-16PR 18900 18840 18990 18935
(L-3) (41,675) (41,545) (41,875) (41,750)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab –670 (–1,475) –600 (–1,325) –580 (–1,280)
Install additional counterweight +325 (+715) +835 (+1,840) +700 (+1,545)
3A-36
Performance Data WHEEL LOADERS
Dimensions
WA420-3
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2200 (7'3") 2250 (7'5")
45 Width over tires 2820 (9'3") 2950 (9'8")
K A Wheelbase 3300 (10'10") 3300 (10'10")
J
B
F G B Hinge pin height, max. height 4250 (13'11") 4315 (14'2")
H
M C Hinge pin height, carry position 520 (1'8") 500 (1'8")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3340 (10'11") 3405 (11'2")
G Overall height, ROPS cab 3380 (11'1") 3445 (11'4")
M Tilt back angle 50°
3A-37
Performance Data WHEEL LOADERS
Dimensions
WA430-5
Unit: mm (ft.in)
Tread 2200 (7'3")
Width over tires 2820 (9'3")
45 A Wheelbase 3350 (11'0")
K B Hinge pin height, max. height 4250 (13'11")
J
B
H F G C Hinge pin height, carry position 520 (1’8”)
M D Ground clearance 460 (1'6")
E
C D E Hitch height 1150 (3'9")
A F Overall height, top of the stack 2965 (9'9")
L G Overall height, ROPS cab 3380 (11'1")
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Tire Clearance Vertical
Weight Straight Full Turn Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-16PR (L3) 0 0 0 0 0 0 2820 9’3” 460 1’6” 0 0”
26.5-25-16PR (L3) +420 +925 +330 +730 +290 +640 2940 9’8” 525 1’9” +65 +2.6”
Remove ROPS cab –660 –1,455 –635 –1,400 –605 –1,335
Install front/rear compartment +120 +265 +115 +255 +110 +245
Install additional counterweight +325 +715 +880 +1,940 +735 +1,620
3A-38
Performance Data WHEEL LOADERS
Dimensions
WA470-6
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 2920 (9'7")
45 A Wheelbase 3450 (11'4")
K B Hinge pin height, max. height 4295 (14'1")
J
B
H F G C Hinge pin height, carry position 585 (1’11”)
M D Ground clearance 460 (1'6")
E
C D E Hitch height 1175 (3'10")
A F Overall height, top of the stack 3015 (9'11")
L G Overall height, ROPS cab 3435 (11'3")
M Tilt back angle 50°
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Tire Clearance
Vertical
Weight Straight Full Turn Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-20PR (L3) 0 0 0 0 0 0 2920 9’7” 460 1’6” 0 0”
23.5-25-20PR (L2) –310 –683 –240 –529 –210 –463 2920 9’7” 460 1’6” 0 0”
26.5-25-16PR (L3) +305 +672 +240 +529 +210 +463 3010 9’11” 525 1’9” +65 3”
26.5-25-20PR (L4) +730 +1,609 +570 +1,257 +500 +1,102 3010 9’11” 525 1’9” +65 3”
Install additional counterweight +400 +880 +1070 +2,358 +930 +2,050
3A-39
Performance Data WHEEL LOADERS
Dimensions
WA470-5
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 2920 (9'7")
45 A Wheelbase 3450 (11'4")
K B Hinge pin height, max. height 4295 (14'1")
J
B
H F G C Hinge pin height, carry position 585 (1’11”)
M D Ground clearance 460 (1'6")
E
C D E Hitch height 1175 (3'10")
A F Overall height, top of the stack 3015 (9'11")
L G Overall height, ROPS cab 3395 (11'2")
M Tilt back angle 50°
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Weight Straight Full Turn Tire Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-20PR (L3) 0 0 0 0 0 0 2920 9’7” 460 1’6” 0 0”
23.5-25-20PR (L2) –310 –683 –240 –529 –210 –463 2920 9’7” 460 1’6” 0 0”
26.5-25-16PR (L3) +305 +672 +240 +529 +210 +463 3010 9’11” 525 1’9” +65 3”
26.5-25-20PR (L4) +730 +1,609 +570 +1,257 +500 –1,102 3010 9’11” 525 1’9” +65 3”
Remove ROPS cab –660 –1,455 –610 –1,345 –590 –1,300
Install front/rear compartment +120 +265 +110 +243 +105 +230
Install additional counterweight +400 +880 +1030 +2,270 +860 +1,895
3A-40
Performance Data WHEEL LOADERS
Dimensions
WA470-5 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I Hi-lift bucket with bolt-on cutting edges 3.8 3.2 3170 2150 20070
(5.0) (4.2) (10'5") (4,740) (44,250)
II Hi-lift bucket with teeth 3.6 3.1 3190 2070 21750
(4.7) (4.1) (10'6") (4,564) (47,950)
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2300 (7'7") 2300 (7'7")
45
Width over tires 2920 (9'7") 3010 (9'11")
K
J A Wheelbase 3450 (11'4") 3450 (11'4")
B B Hinge pin height, max. height 4805 (15'10") 4870 (16')
H F G
M
C Hinge pin height, carry position 730 (2'5") 730 (2'5")
C
E D Ground clearance 460 (1'6") 525 (1'9")
D
A
E Hitch height 1175 (3'10") 1240 (4'1")
L F Overall height, top of the stack 3015 (9'11") 3080 (10'2")
G Overall height, ROPS cab 3395 (11'2") 3460 (11'5")
M Tilt back angle 50°
3A-41
Performance Data WHEEL LOADERS
Dimensions
WA470-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
I General-purpose bucket with bolt-on cutting edges;
4.2 3.6 3170 2090 19600
(Loading and excavating of soil, sand and variety of
(5.5) (4.7) (10'5") (4,610) (43,200)
other commonly handled materials.)
3.9 3.4 3190 2015 21100
II General-purpose bucket with teeth
(5.1) (4.45) (10'6") (4,440) (46,500)
3.8 3.3 3170 2200 20700
III Excavating bucket with bolt-on cutting edges (5.0) (4.3) (10'5") (4,850) (45,600)
IV Excavating bucket with teeth (Loading and 3.6 3.1 3190 2130 22400
excavating of crushed rock and blasted rock.) (4.7) (4.05) (10'6") (4,700) (49,400)
V Light material bucket with bolt-on cutting edges; 5.2 4.5 3170 2330 16800
(A Lighter-weight, large-capacity bucket.) (6.8) (5.9) (10'5") (5,140) (37,000)
VI Rock bucket with teeth ; (Spade nose). (Loading and 3.5 3.0 3170 2120 18600
excavating of blasted rock) (4.6) (3.9) (10'5") (4,670) (41,000)
Operating weight
kg(lb)
Tires/Buckets I II III IV
23.5-25-20PR 21610 21535 21700 21630
(L-2) (47,650) (47,485) (47,850) (47,695)
23.5-25-20PR 21920 21845 22010 21940
(L-3) (48,335 (48,170) (48,535) (48,380)
26.5-25-16PR 22225 22150 22315 22245
(L-3) (49,005 (48,845) (49,205) (49,050)
26.5-25-20PR 22650 22575 22740 22670
(L-4) (49,945 (49,780) (50,145) (49,990)
26.5-25-20PR 23050 22975 23140 23070
(L-5) (50,815 (50,650) (51,015) (50,860)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab –670 (–1,475) –600 (–1,325) –580 (–1,280)
Install additional counterweight +400 (+885) +1010 (+2,220) +845 (+1,865)
3A-42
Performance Data WHEEL LOADERS
Dimensions
WA470-3
Unit: mm (ft.in)
23.5-25 tires 26.5-25 tires
Tread 2300 (7'7") 2300 (7'7")
45 Width over tires 2920 (9'7") 3010 (9'10")
K A Wheelbase 3400 (11'2") 3400 (11'2")
J
B
F G B Hinge pin height, max. height 4295 (14'1") 4230 (14'4")
H
M C Hinge pin height, carry position 590 (1'11") 570 (1'10")
E
C D D Ground clearance 460 (1'6") 525 (1'9")
A E Hitch height 1175 (3'10") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3385 (11'1") 3450 (11'4")
G Overall height, ROPS cab 3395 (11'2") 3460 (11'4")
M Tilt back angle 48°
3A-43
Performance Data WHEEL LOADERS
Dimensions
WA480-6
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45 A Wheelbase 3450 (11'4")
K B Hinge pin height, max. height 4505 (14'9")
J
B
H F G C Hinge pin height, carry position 585 (1’11”)
M D Ground clearance 525 (1'9")
E
C D E Hitch height 1240 (4'1")
A F Overall height, top of the stack 3080 (10'1")
L G Overall height, ROPS cab 3500 (11'6")
M Tilt back angle 50°
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
26.5-25-20PR (L3) 0 0 0 0 0 0 3010 9’11” 525 1’9” 0 0”
26.5-25-20PR (L4) +360 +794 +250 +551 +220 +485 3010 9’11” 525 1’9” 0 0”
Install additional counterweight +400 +880 +980 +2,160 +850 +1,873
3A-44
Performance Data WHEEL LOADERS
Dimensions
WA480-5
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45 A Wheelbase 3450 (11'4")
K B Hinge pin height, max. height 4505 (14'9")
J
B
H F G C Hinge pin height, carry position 585 (1’11”)
M D Ground clearance 525 (1'9")
E
C D E Hitch height 1240 (4'1")
A F Overall height, top of the stack 3080 (10'1")
L G Overall height, ROPS cab 3500 (11'6")
M Tilt back angle 52°
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Tire Clearance
Vertical
Weight Straight Full Turn Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
23.5-25-20PR (L3) 0 0 0 0 0 0 2920 9’7” 460 1’6” 0 0”
26.5-25-20PR (L2) –310 –683 –240 –529 –210 –463 2920 9’7” 460 1’6” 0 0”
26.5-25-16PR (L3) +305 +672 +240 +529 +210 +463 3010 9’11” 525 1’9” +65 +2.6”
26.5-25-20PR (L4) +730 +1,609 +570 +1,257 +500 +1,102 3010 9’11” 525 1’9” +65 +2.6”
Remove ROPS cab –660 –1,455 –610 –1,345 –590 –1,300
Install additional counterweight +400 +880 +1030 +2,270 +860 +1,895
3A-45
Performance Data WHEEL LOADERS
Dimensions
WA500-6
Unit: mm (ft.in)
Tread 2400 (7'10")
Width over tires 3190 (10'6")
45 A Wheelbase 3780 (12'5")
K B Hinge pin height, max. height 4755 (15'7")
J
B
H F G C Hinge pin height, carry position 575 (1’11”)
M D Ground clearance 450 (1'6")
E
C D E Hitch height 1115 (3'8")
A F Overall height, top of the stack 3665 (12'0")
L G Overall height, ROPS cab 3785 (12'5")
M Tilt back angle 50°
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Weight Straight Full Turn Tire Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
29.5-25-22PR (L3) 0 0 0 0 0 0 3190 10’6” 450 1’6” 0 0”
Install additional counterweight +900 +1,985 +1,865 +4,110 +1,645 +3,625
Air conditioner +65 +145 +33 +75 +30 +240
Emegency steering +70 +155 +65 +145 +55 +120
Lock-up clutch torque converter +45 +100 +60 +130 +50 +110
ECCS (Electronically Controlled
+120 +265 +13 +30 +11 +24
Suspension System)
3A-46
Performance Data WHEEL LOADERS
Dimensions
WA500-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
4.3 3.7 3460 2570 27000
I Excavating bucket (straight edge) with teeth (5.6) (4.8) (11'4") (5,670) (59,520)
4.3 3.7 3400 2960 21780
II Excavating bucket (spade nose) with tip teeth (5.6) (4.8) (11'2") (6,530) (48,020)
III General-purpose bucket with bolt on cutting edge 5.0 4.3 3400 2760 23700
without teeth ; Loading stockpile products (6.5) (5.6) (11'2") (6,080) (52,250)
5.5 4.7 3400 2880 21200
IV Loose material bucket with bolt on cutting edge (7.2) (6.1) (11'2") (6,350) (46,740)
Operating weight
kg(lb)
Tires/Buckets I II III IV
28220 28610 28410 27910
26.5-25-20PR (L-3) (62,210) (63,070) (62,630) (61,530)
28770 29160 28960 28460
29.5-25-22PR (L-3) (63,430) (64,290) (63,850) (62,750)
28620 29010 28810 28310
26.5-25-20PR (L-4) (63,100) (63,960) (63,520) (62,420)
28980 29370 29170 28670
26.5-25-20PR (L-5)
(63,890) (64,750) (64,310) (63,210)
29.5-25-28PR (L-4) 29310 29700 29500 29000
(64,620) (65,480) (65,040) (63,940)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS cab –585 (–1,290) –510 (–1,125) –490 (–1,080)
Remove steel cab –460 (–1,015) –400 (–880) –385 (–850)
Remove front half fender –45 (–100) –14 (–30) –14 (–30)
Remove teeth –315 (–690) –415 (–910) –415 (–915)
Install additional counterweight +1000 (+2,205) +2400 (+5,290) +2000 (+4,410)
3A-47
Performance Data WHEEL LOADERS
Dimensions
WA500-3
Unit: mm (ft.in)
26.5-25 tires 29.5-25 tires
Tread 2400(7'10") 2400 (7'10")
45 Width over tires 3090 (10'2") 3190 (10'6")
K A Wheelbase 3600 (11'10") 3600 (11'10")
J
B
F G B Hinge pin height, max. height 4455 (14'7") 4500 (14'9")
H
M C Hinge pin height, carry position 520 (1'8") 565 (1'10")
E
C D D Ground clearance 405 (1'4") 450 (1'5")
A E Hitch height 1195 (3'11") 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3660 (12') 3705 (12'2")
G Overall height, ROPS canopy 3815 (12'6") 3860 (12'8")
M Tilt back angle 48°
3A-48
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
4.2 3.6 3460 2580 28450
I Excavating bucket (straight edge) with teeth (5.6) (4.8) (11'4") (5,690) (62,720)
* Excluding tire protectors
Unit: mm (ft.in)
29.5-25 tires
Tread 2400 (7'20")
45 Width over tires 3190 (10'6")
K A Wheelbase 3600 (11'10")
J
B
F G B Hinge pin height, max. height 4905 (16'1")
H
M C Hinge pin height, carry position 565 (1'10")
E
C D D Ground clearance 450 (1'5")
A E Hitch height 1240 (4'1")
L
FVBH0030
F Overall height, top of the stack 3635 (11'11")
G Overall height, ROPS canopy 3860 (12'8")
M Tilt back angle 48°
3A-49
Performance Data WHEEL LOADERS
Dimensions
WA600-6
Unit: mm (ft.in)
3990 mm 13'1" 3850 mm 12'8"
Boom Boom
Tread 2650 (8'8")
Width over tires 3540 (11'9")
45
A Wheelbase 4500 (14'9")
K
J B Hinge pin height, max. height 5885 (19'3") 5665 (18'7")
B
H F G C Hinge pin height, carry position 720 (2'4") 670 (2'3")
M
E D Ground clearance 525 (1'9")
C D E Hitch height 1385 (4'7")
A F Overall height, top of the stack 4270 (14'0")
L
G Overall height, ROPS cab 4460 (14'8")
M 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Apply the following weight changes to operating weight and static tipping load.
3A-50
Performance Data WHEEL LOADERS
Dimensions
Weight Changes
3990 mm (13’1”) boom
Change in Tipping Load Change in
Ground
Operating Width Over Tire Vertical
Weight Straight Full Turn Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
35/65-33-36PR (L4) 0 0 0 0 0 0 3,540 11’7” 525 1’9” 0 0’0”
35/65-33-36PR (L5) +1,000 +2,205 +715 +1,575 +595 +1,310 3,540 11’7” 525 1’9” 0 0’0”
35/65-33-42PR (L4) +20 +45 +15 +30 +10 +25 3,555 11’8” 525 1’9” 0 0’0”
35/65-R33* (L4) –780 –1,720 –555 –1,230 –465 –1,025 3,565 11’8” 460 1’6” –65 –1’9”
35/65-R33* (L5) –235 –520 –170 –375 –140 –310 3,565 11’8” 460 1’6” –65 –1’9”
OPT Counterweight +1,000 +2,205 +2,380 +5,245 +1,985 +4,370
3A-51
Performance Data WHEEL LOADERS
Dimensions
WA600-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
6.1 5.1 3685 4250 37600
I Excavating bucket (straight edge) with tip teeth (8.0) (6.7) (12'1") (9,370) (82,890)
6.1 5.1 3685 4305 43750
II Excavating bucket (spade nose) with tip teeth (8.0) (6.7) (12'1") (9,490) (96,450)
11.0 9.5 4200 4420 31950
III Coal bucket (straight edge) (14.4) (12.4) (13'9") (9,740) (70,440)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –800 (–1,760) –700 (–1540) –615 (–1,360)
Remove steel cab –430 (–950) –310 (–680) –275 (–610)
Remove teeth –372 (–820) –475 (–1050) –475 (–1,050)
Install additional counterweight +1000 (+2,200) +2300 (+5070) +2030 (+4,480)
3A-52
Performance Data WHEEL LOADERS
Dimensions
WA600-3
Unit: mm (ft.in)
35/65-33 tires 29.5-29 tires
Tread 2650 (8'8") 2650 (8'8")
Width over tires 3570 (11'9") 3480 (11'5")
45
K A Wheelbase 4100 (13'5") 4100 (13'5")
J
B B Hinge pin height, max. height 5155 (16'11") 5110 (16'9")
F G
H C Hinge pin height, carry position 670 (2'2") 625 (2'1")
M
E D Ground clearance 495 (1'7") 450 (1'6")
C D
E Hitch height 1295 (4'3") 1250 (4'1")
A
L F Overall height, top of the stack 4125 (13'6") 4080 (13'5")
FVBH0030 G Overall height, ROPS canopy 4250 (13'11") 4205 (13'10")
Overall height, ROPS and cab 4250 (13'11") 4205 (13'10")
M Tilt back angle 49.5°
3A-53
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
5.6 4.0 3685 44500
I Excavating bucket (straight edge) with tip teeth (7.3) (5.2) (12'1") (98,210)
5.6 4.0 3685 4400 37500
II Excavating bucket (spade nose) with tip teeth (7.3) (5.2) (12'1") (9,700) (82,670)
* Excluding tire protectors
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
45
K A Wheelbase 4100 (13'5")
J
B B Hinge pin height, max. height 5770 (18'11")
F G
H C Hinge pin height, carry position 670 (2'2")
M
E D Ground clearance 495 (1'7")
C D
E Hitch height 1385 (4'7")
A
L F Overall height, top of the stack 4125 (13'6")
FVBH0030 G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
M Tilt back angle 49.5°
3A-54
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (for Load & Carry)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
7.5 6.8 3685 5075 35400
I Excavating bucket (spade nose) with tip teeth (9.8) (8.9) (12'1") (11,190) (78,040)
* Excluding tire protectors
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
45
K A Wheelbase 4100 (13'5")
J
B B Hinge pin height, max. height 4850 (15'11")
F G
H C Hinge pin height, carry position 670 (2'2")
M
E D Ground clearance 495 (1'7")
C D
E Hitch height 1385 (4'7")
A
L F Overall height, top of the stack 4125 (13'6")
FVBH0030 G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
M Tilt back angle 49.5°
Measured with 35/65-33 tires
Buckets I
H.Dumping clearance, max. height and 45° dump angle** 2920 (9'7")
J. Reach at max. height and 45° dump angle** 2105 (6'11")
K. Operating height (fully raised) 7065 (23'2")
L. Overall length 11395 (37'5")
Turning radius* 8225 (27'0")
0° 105 (4.1")
Digging depth
10° 505 (1'8")
* Bucket at carry, outside corner of bucket.
** At the end of teeth or B.O.C.
3A-55
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (for stone handling)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
38800
I Stone handling bucket — — (85,540)
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
K A Wheelbase 4100 (13'5")
J
B
43˚ B Hinge pin height, max. height 4850 (15'11")
FG
H C Hinge pin height, carry position 670 (2'2")
C E D Ground clearance 495 (1'7")
D
E Hitch height 1385 (4'7")
A F Overall height, top of the stack 4125 (13'6")
FVBH0107
G Overall height, ROPS canopy 4250 (13'11")
Overall height, ROPS and cab 4250 (13'11")
NOTE:
a) It forbids riding over obstacle during stone handling (Allowable riding over height must be 50 mm (2") or
less).
b) Travel speed is set only to 1st gear during stone handling.
3A-56
Performance Data WHEEL LOADERS
Dimensions
WA700-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
8.7 7.6 4330 6770 64700
I Excavating bucket (straight edge) without tip teeth (11.4) (9.9) (14'2") (14,925) (142,640)
8.7 7.6 4330 7150 52700
II Excavating bucket (spade nose) without tip teeth (11.4) (9.9) (14'2") (15,760) (116,180)
III General-purpose bucket (straight edge) without tip 9.4 8.2 4330 7150 62400
teeth (12.3) (10.7) (14'2") (15,760) (137,600)
* Excluding tire protectors
Static tipping load kg(lb)
Operating weight kg(lb)
Straight 40° full turn
Tires/Buckets I II III I II III I II III
40/65-39-36 70620 71000 71000 46400 46050 46700 40730 40440 41080
PR (L-5) (155,690) (156,530) (156,530) (102,290) (101,520) (102,955) (89,790) (89,070) (90,565)
41.25/70-39-34 71220 71600 71600 46830 46480 47130 41100 40750 41450
PR (L-5) (157,010) (157,850) (157,850) (103,240) (102,470) (103,900) (90,610) (89,840) (91,380)
45/65-R39 71700 72080 72080 47160 46810 47460 41400 41070 41750
(L-5) (158,070) (158,910) (158,910) (103,970) (103,200) (104,630) (91,270) (90,540) (92,040)
• All dimensions, weights and performance values based on SAE J-732c and J-742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, steel cab, ROPS canopy, front half-fenders
and tip type teeth and operator.
• Machine stability and operating weight are affected by counterweight or ballast, tire size and other attachments.
Use either counterweight or ballast, not both. Apply the following weight changes to operating weight and static tipping load.
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1050 (–2,315) –965 (–2,130) –850 (–1,870)
Remove steel cab –430 (–950) –315 (–690) –275 (–610)
Remove teeth and adapter –890 (–1,960) +1150 (+2,535) +1005 (+2,220)
Unit: mm (ft.in)
40/65-39-36PR 45/65-R39
(L-5) tires (L-5) tires
Tread 3000 (9'10") 3060 (10')
45
Width over tires 4040 (13'3") 4160 (13'8")
K A Wheelbase 4800 (15'9") 4800 (15'9")
J
B Hinge pin height, max. height 5990 (19'8") 6035 (19'10")
B
H FG C Hinge pin height, carry position 720 (2'4") 765 (2'6")
M D Ground clearance 540 (1'9") 585 (1'11")
C E
D E Hitch height 1530 (5') 1575 (5'2")
A
L
F Overall height, top of the stack 4825 (15'10") 4870 (16')
FVBH0019 G Overall height, ROPS canopy 4790 (15'9") 4835 (15'10")
M Tilt back angle 50°
3A-57
Performance Data WHEEL LOADERS
Dimensions
WA700-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
8.0 7.0 4330 6830 55800
I Excavating bucket (spade nose) with tip teeth (10.5) (9.2) (14'2") (15,060) (123,020)
8.7 7.6 4330 7150 52700
II Stockpile bucket (spade nose) with tip teeth (11.4) (9.9) (14'2") (15,760) (116,180)
* Excluding tire protectors
Unit: mm (ft.in)
40/65-39-36 PR (L-5) tires
Tread 3000 (9'10")
45
Width over tires 4040 (13'3")
K A Wheelbase 4800 (15'9")
J
B Hinge pin height, max. height 6550 (21'6")
B
H FG C Hinge pin height, carry position 720 (2'4")
M D Ground clearance 540 (1'9")
C E
D E Hitch height 1545 (5'1")
A
L F Overall height, top of the stack 4580 (15')
FVBH0019
G Overall height, ROPS and cab 4790 (15'9")
M Tilt back angle 50°
3A-58
Performance Data WHEEL LOADERS
Dimensions
WA800-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
11.0 9.3 4810 11430 69000
I Excavating bucket (spade nose) with tip teeth (14.4) (12.2) (15'9") (25,200) (152,120)
12.3 10.4 4810 12150 64170
II Stock pile (spade nose ) with teeth (16.1) (13.6) (15'9") (26,790) (141,470)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1385 (–3,055) –1220 (–2,690) –1180 (–2,600)
Remove steel cab –430 (–950) –335 (–740) –330 (–730
Install additional couinter weight +1600 (+3,530) +3850 (+8,490) +3400 (+7,500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
B Hinge pin height, max. height 6785 (22'3")
B
H FG C Hinge pin height, carry position 850 (2'9")
M D Ground clearance 550 (1'10")
C E
D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
M Tilt back angle 50°
3A-59
Performance Data WHEEL LOADERS
Dimensions
WA800-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
10.0 8.5 4810 71790
I Excavating bucket (spade nose) with tip teeth (13.1) (11.1) (15'9") (158,270)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1385 (–3,055) –1220 (–2,690) –1180 (–2,600)
Remove steel cab –430 (–950) –335 (–740) –330 (–730)
Install additional couinter weight +1600 (+3,530) +3850 (+8,490) +3400 (+7,500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
B Hinge pin height, max. height 7265 (23'10")
B
H FG C Hinge pin height, carry position 850 (2'9")
M D Ground clearance 550 (1'10")
C E
D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
M Tilt back angle 50°
3A-60
Performance Data WHEEL LOADERS
Dimensions
WA800-3 (for Load & Carry)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
14.0 11.5 5040 67000
I Excavating bucket (spade nose) with tip teeth (18.3) (15.0) (16'6") (147,710)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1385 (–3,055) –1220 (–2,690) –1180 (–2,600)
Remove steel cab –430 (–950) –335 (–740) –330 (–730)
Install additional couinter weight +1600 (+3,530) +3850 (+8,490) +3400 (+7,500)
Unit: mm (ft.in)
45/65-45 tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
B Hinge pin height, max. height 6140 (20'2")
B
H FG C Hinge pin height, carry position 850 (2'9")
M D Ground clearance 550 (1'10")
C E
D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
M Tilt back angle 50°
3A-61
Performance Data WHEEL LOADERS
Dimensions
WA900-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
13.0 11.0 4810 12320 67900
I Excavating bucket (spade nose) with tip teeth (17.0) (14.4) (15'9") (27,160) (149,690)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1385 (–3,055) –1220 (–2,690) –1180 (–2,600)
Remove steel cab –430 (–950) –335 (–740) –330 (–730)
Unit: mm (ft.in)
45/65-45-Tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
B Hinge pin height, max. height 6960 (22'10")
B
H FG C Hinge pin height, carry position 800 (2'7")
M D Ground clearance 550 (1'10")
C E
D E Hitch height 1300 (4'3")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
M Tilt back angle 50°
3A-62
Performance Data WHEEL LOADERS
Dimensions
WA900-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
11.5 9.7 4810 71700
I Excavating bucket (spade nose) with tip teeth (15.0) (12.7) (15'9") (158,070)
* Excluding tire protectors
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Remove ROPS canopy –1385 (–3,055) –1220 (–2,690) –1180 (–2,600)
Remove steel cab –430 (–950) –335 (–740) –330 (–730)
Unit: mm (ft.in)
45/65-45-Tires
Tread 3350 (11')
45
Width over tires 4585 (15'1")
K A Wheelbase 5450 (17'11")
J
B Hinge pin height, max. height 7445 (24'5")
B
H FG C Hinge pin height, carry position 800 (2'7")
M D Ground clearance 550 (1'10")
C E
D E Hitch height 1390 (4'7")
A
L F Overall height, top of the stack 5080 (16'8")
FVBH0019
G Overall height, ROPS and cab 5275 (17'4")
M Tilt back angle 50°
3A-63
Performance Data WHEEL LOADERS
Dimensions
WA1200-3
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
20.0 17.2 6400 23840 130000
I Excavating bucket (spade nose) with tip teeth (26.2) (22.5) (21') (52,560) (286,600)
* Excluding tire protectors
Unit: mm (ft.in)
55/80-57 tires 65/65-57 tires
Tread 4300 (14'1") 4300 (14'1")
45
Width over tires 5710 (18'9") 5970 (18'9")
K A Wheelbase 7100 (23'4") 7100 (23'4")
J
B Hinge pin height, max. height 8830 (29') 8895 (29'2")
B
H FG C Hinge pin height, carry position 1150 (3'9") 1150 (3'9")
M D Ground clearance 650 (2'2") 715 (2'4")
C E
D E Hitch height 1310 (4'4") 1375 (4'6")
A
L F Overall height, top of the stack 6630 (21'9") 6695 (22')
FVBH0019
G Overall height, ROPS and cab 6865 (22'6") 6930 (22'9")
M Tilt back angle 50°
3A-64
Performance Data WHEEL LOADERS
Dimensions
WA1200-3 (with high lift boom)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width* weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
18.0 15.0 6400 23170 126000
I Excavating bucket (spade nose) with tip teeth (23.5) (19.6) (21') (51,080) (277,780)
* Excluding tire protectors
Unit: mm (ft.in)
55/80-57 tires 65/65-57 tires
Tread 4300 (14'1") 4300 (14'1")
45
Width over tires 5710 (18'9") 5970 (18'9")
K A Wheelbase 7100 (23'4") 7100 (23'4")
J
B Hinge pin height, max. height 9480 (31'1") 9545 (31'4")
B
H FG C Hinge pin height, carry position 1150 (3'9") 1150 (3'9")
M D Ground clearance 650 (2'2") 715 (2'4")
C E
D E Hitch height 1310 (4'4") 1375 (4'6")
A
L F Overall height, top of the stack 6630 (21'9") 6695 (22')
FVBH0019
G Overall height, ROPS and cab 6865 (22'6") 6930 (22'9")
M Tilt back angle 50°
3A-65
Performance Data WHEEL LOADERS
Dimensions
WA150-5 (Canada source)
Unit: mm (ft.in)
15.5-25-12PR (L2) 17.5-25-12PR (L2)
Tread 1780 (5'10") 1780 (5'10")
Width over tires 2180 (7’2”) 2220 (7’3”)
45
K A Wheelbase 2600 (8'6") 2600 (8'6")
J B Hinge pin height,
B 3475 (11’5”) 3510 (11’6”)
F G max. height
H
M C Hinge pin height,
360 (1’2”) 355 (1’2”)
E carry position
C D
D Ground clearance 390 (1’3”) 425 (1’5”)
A E Hitch height 790 (2’7”) 825 (2'8")
L
F Overall height,
2410 (7’11”) 2445 (8'0”)
top of the stack
G Overall height,
3025 (9’11”) 3060 (10’0”)
ROPS cab
H See dumping
clearance below
M Tilt back angle 46°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Ground
Operating Width Over Tire Vertical
Weight Straight Full Turn Clearance Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
15.5-25-12PR (L2) –110 –243 –70 –154 –60 –132 2180 7’2” 390 1’3” –10 –0.4”
Install ROPS canopy
(instead of cab) –110 –243 –110 –243 –95 –209
3A-66
Performance Data WHEEL LOADERS
Dimensions
WA200-5 (Canada source)
Unit: mm (ft.in)
Tread 1930 (6'4")
Width over tires 2470 (8’1”)
45 A Wheelbase 2840 (9'4")
K
J B Hinge pin height, max. height 3705 (12’2”)
B
H F G C Hinge pin height, carry position 380 (1’3”)
M D Ground clearance 495 (1’8”)
C D
E E Hitch height 940 (3'1")
A F Overall height, top of the stack 2785 (9'2”)
L G Overall height, ROPS cab 3180 (10’5”)
FVBH0030
H See dumping clearance below
M Tilt back angle 48°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight, air
conditioning and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
17.5/25-12PR (L2) –450 –992 –240 –529 –220 –485 2375 7’10” 425 1’5” –70 –2.8”
17.5/25-12PR (L3) –345 –761 –160 –353 –150 –331 2375 7’10” 425 1’5” –70 –2.8”
20.5/25-12PR (L2) 0 0 0 0 0 0 2470 8’1” 495 1’8” 0 0”
20.5/25-12PR (L3) +215 +474 +115 +254 +100 +220 2470 8’1” 495 1’8” 0 0”
Install ROPS canopy (instead of cab) –250 –551 –250 –551 –220 –485
Remove additional counterweight –300 –661 –590 –1,300 –510 –1,124
Remove air conditioner –70 –154 –60 –132 –50 –110
3A-67
Performance Data WHEEL LOADERS
Dimensions
WA200PT-5 (Canada source)
Unit: mm (ft.in)
20.5-25 tires
Tread 1930 (6'4")
45 Width over tires 2492 (8’2”)
K
J A Wheelbase 2840 (9'4")
B
F G
B Hinge pin height, max. height 3837 (12’7”)
H
M C Ground clearance 495 (1’8”)
C D
E D Hitch height 940 (3'1")
A
E Overall height, top of the stack 2785 (9'2”)
L F Overall height, ROPS cab 3180 (10’5”)
FVBH0030
M Tilt back angle 48°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab and operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Ground Change in
Operating Width Over Tire Vertical
Straight Full Turn Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
17.5-25-12PR (L2) –450 –992 –323 –529 –271 –485 2413 7’11” 425 1’5” –70 –2.8”
17.5-25-12PR (L3) –345 –761 –248 –353 –209 –331 2413 7’11” 425 1’5” –70 –2.8”
20.5-25-12PR (L2) 0 0 0 0 0 0 2492 8’2” 495 1’8” 0 0”
20.5-25-12PR (L3) +215 +474 +155 +341 +130 +220 2492 8’2” 495 1’8” 0 0”
Install ROPS canopy
–250 –551 –180 –397 –151 –333
(instead of cab)
3A-68
Performance Data WHEEL LOADERS
Dimensions
WA250-5 (Canada source)
Unit: mm (ft.in)
Tread 1930 (6'4")
Width over tires 2464 (8’1”)
A Wheelbase 2900 (9'6")
45
K B Hinge pin height, max. height 3795 (12’5”)
J
B C Hinge pin height, carry position 450 (1’6”)
F G
H D Ground clearance 465 (1’6”)
M
E E Hitch height 965 (3'2")
C D
F Overall height, top of the stack 3124 (10'3”)
A
L G Overall height, ROPS cab 3251 (10’8”)
H See dumping clearance below
M Tilt back angle 52°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Ground
Operating Vertical
Straight Full Turn Over Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
17.5/25-12PR (L2) –330 –727 –286 –631 –249 –549 2380 7’10” 395 1’4” –70 –2.8”
17.5/25-12PR (L3) –290 –641 –252 –556 –219 –483 2380 7’10” 395 1’4” –70 –2.8”
20.5/25-12PR (L3) +90 +199 +78 +172 +68 +150 2470 8’1” 457 1’6” 0 0”
Install ROPS canopy (instead of cab) –331 –730 –287 –632 –249 –550
3A-69
Performance Data WHEEL LOADERS
Dimensions
WA250PT-5 (Canada source)
Unit: mm (ft.in)
20.5/25-12PR
Standard tire
(L2)
Tread 1930 (6'4")
I Width over tires 2464 (8’1”)
45 H
B A Wheelbase 2900 (9'6")
G M E F B Hinge pin height, max. height 3861 (12’8”)
D
C Ground clearance 465 (1’6”)
C D Hitch height 965 (3'2")
A E Overall height, top of the stack 3124 (10'3”)
J
F Overall height, ROPS cab 3251 (10’8”)
M Tilt back angle 44°
Fork Bucket
Static tipping load Stockpile
Straight kg (lb) 6855 (15,113) Bucket Type
– boom level Bucket
Fork level, 610 Heaped m3 (yd3) 1.9 (2.5)
mm (24”) load Full turn (40°) kg (lb) 5963 (13,146) Bucket capacity
center Struck m3 (yd3) 1.6 (2.1)
Operating weight kg (lb) 12061 (26,590) Bucket width mm (ft.in) 2685 (8'10")
Bucket weight kg (lb) 981 (2,163)
Fork tine length mm (in) 1525 (60")
Straight kg (lb) 8800 (19,417)
Ground to top of tine at maximum lift mm (ft.in) 3820 (12'6") Static tipping load
Full turn (40°) kg (lb) 7750 (17,086)
Reach at maximum lift mm (ft.in) 750 (2'5")
Dumping clearance, max. height and mm (ft.in) 2905 (9'6")
Ground to top of tine – boom and tine 45° dump angle
mm (ft.in) 1820 (5'11")
level
Reach at 2130 mm (7') and 45° dump
Reach boom and tine level mm (ft.in) 1660 (5’5”) mm (ft.in) 1632 (5'4")
angle
Overall length – tine level on ground mm (ft.in) 8055 (26’5") Reach with boom/bucket level mm (ft.in) 2469 (8'1")
Operating load kg (lb) 2982 (6,574) Operating height (fully raised) mm (ft.in) 5195 (17'0")
Bucket on ground mm (ft.in) 7310 (24'0")
• Operating load per SAE J1197 (Feb. 1991), 50% of static Overall length
tipping load. Bucket at carry mm (ft.in) 7255 (23’10”)
• Static tipping load and operating weight shown include 0° mm (ft.in) 112 (4.4")
Digging depth
lubricant, coolant, full fuel tank, ROPS cab, 20.5/25-12PR 10° mm (ft.in) 325 (1’1")
(L2) tires, front fenders, and operator. Breakout force kg (lb) 11100 (24,581)
• Machine stability and operating weight affected by Operating weight kg (lb) 12455 (27,459)
counterweight, tire size, and other attachments.
• Note the following weight changes to operating weight and • All dimensions, weights, and performance values based on
static tipping loads. SAE J732c and J742b standards (bucket only).
Weight Changes
Change in Change in Tipping Load Change in
Operating Width Over Ground Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
17.5-25-12PR (L3) –290 –641 –205 –452 –178 –393 2380 7’10” 395 1’4” –70 –2.8”
20.5-25-12PR (L3) +90 +199 +64 +141 +56 +123 2470 8’1” 457 1’6” 0 0”
Install ROPS canopy (instead of cab) –331 –730 –234 –516 –203 –449
3A-70
Performance Data WHEEL LOADERS
Dimensions
WA320PT-5 (Canada source)
Unit: mm (ft.in)
20.5/25-12PR
Standard tire
(L2)
Tread 2050 (6'9")
I Width over tires 2589 (8’6”)
45 H
B A Wheelbase 3030 (9'11")
G M E F B Hinge pin height, max. height 4035 (13’3”)
D
C Ground clearance 425 (1’5”)
C D Hitch height 1095 (3'7")
A E Overall height, top of the stack 2775 (9'1”)
J
F Overall height, ROPS cab 3200 (10’6”)
M Tilt back angle 49°
Fork Bucket
Static tipping load Light Material
Straight kg (lb) 8290 (18,276) Bucket Type
– boom level Bucket
Fork level, 610 Heaped m3 (yd3) 2.7 (3.5)
mm (24”) load Full turn (40°) kg (lb) 7212 (15,899) Bucket capacity
center Struck m3 (yd3) 2.2 (2.9)
Operating weight kg (lb) 14588 (32,161) Bucket width mm (ft.in) 2740 (9'10")
Bucket weight kg (lb) 1249 (2,753)
Fork tine length mm (in) 1525 (60")
Straight kg (lb) 9906 (21,838)
Ground to top of tine at maximum lift mm (ft.in) 3919 (12'10") Static tipping load
Full turn (40°) kg (lb) 8616 (18,999)
Reach at maximum lift mm (ft.in) 993 (3'3")
Dumping clearance, max. height and mm (ft.in) 2685 (8'10")
Ground to top of tine – boom and tine 49° dump angle
mm (ft.in) 1839 (6'1")
level
Reach at 2130 mm (7') and 49° dump
Reach boom and tine level mm (ft.in) 1920 (6’3”) mm (ft.in) 2240 (7'4")
angle
Overall length – tine level on ground mm (ft.in) 8597 (28’2") Reach with boom/bucket level mm (ft.in) 2963 (9'9")
Operating load kg (lb) 3606 (7,950) Operating height (fully raised) mm (ft.in) 5524 (18'1")
Bucket on ground mm (ft.in) 8142 (26'8")
• Operating load per SAE J1197 (Feb. 1991), 50% of static Overall length
tipping load. Bucket at carry mm (ft.in) 7942 (26’2”)
• Static tipping load and operating weight shown include 0° mm (ft.in) 110 (4.3")
Digging depth
lubricant, coolant, full fuel tank, ROPS cab, 20.5/25-12PR 10° mm (ft.in) 380 (1’3")
(L2) tires, front fenders, and operator. Breakout force kg (lb) 12349 (27,225)
• Machine stability and operating weight affected by Operating weight kg (lb) 15408 (33,968)
counterweight, tire size, and other attachments.
• Note the following weight changes to operating weight and • All dimensions, weights, and performance values based on
static tipping loads. SAE J732c and J742b standards (bucket only).
Weight Changes
Change in Change in Tipping Load Change in
Operating Width Over Ground Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-12PR (L3) +160 +353 +120 +265 +104 +229 2585 8’6” 425 1’5” 0 0”
Install ROPS canopy (instead of cab) –150 –331 –107 –239 –93 –205
3A-71
Performance Data WHEEL LOADERS
Dimensions
WA320-5 (Canada source)
Unit: mm (ft.in)
Tread 2050 (6'9")
Width over tires 2585 (8'6")
A Wheelbase 3030 (9'11")
45
K B Hinge pin height, max. height 3905 (12'10")
J
B C Hinge pin height, carry position 390 (1’3”)
F G
H D Ground clearance 425 (1'5")
M
E E Hitch height 1095 (3'7")
C D
F Overall height, top of the stack 2775 (9'1")
A
L
G Overall height, ROPS cab 3200 (10'6")
H See dumping clearance below
M Tilt back angle 49°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in Change in Tipping Load Change in
Width Over Ground
Operating Vertical
Straight Full Turn Tire Clearance
Weight Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-12PR (L3) +160 +353 +120 +265 +104 +229 2585 8’6” 425 1’5” 0 0
Install ROPS canopy (instead of cab) –150 –331 –107 –239 –93 –205
Remove additional counterweight –520 –1,146 –1070 –2,359 –940 –2,072
* 520kg (1150lb) ballast used instead of additional counterweight
** 675kg (1490lb) ballast used instead of additional counterweight
3A-72
Performance Data WHEEL LOADERS
Dimensions
WA380-6 (Canada source)
Unit: mm (ft.in)
Tread 2160 (7'1")
Width over tires 2780 (9'1")
A Wheelbase 3300 (10'10")
45
K B Hinge pin height, max. height
J
B Standard boom 4095 (13'5")
F G
H High lift boom 4625 (15’2”)
M
E C Hinge pin height, carry position
C D
Standard boom 520 (1'8")
A
L High lift boom 685 (2’3”)
D Ground clearance 460 (1'6")
E Hitch height 1150 (3'9")
F Overall height, top of the stack 2950 (9'8")
G Overall height, ROPS cab 3380 (11'1")
M Tilt back angle 52°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in
Operating Tipping Load Tipping Load Ground
Weight Straight Full Turn Width over tires clearance vertical
Tires dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
20.5-25-16PR (L-3) –1080 –2,380 –740 –1,630 –650 –1,430 2695 8'10" 390 1'3" –65 –3"
23.5-25-16PR (L-3) 0 0 0 0 0 0 2780 9'1" 455 1'6" 0 0
Additional
+340 +750 +900 +1,985 +755 +1,655
counterweight
3A-73
Performance Data WHEEL LOADERS
Dimensions
WA400-5 (Canada source)
Unit: mm (ft.in)
Tread 2160 (7'1")
Width over tires 2775 (9'1")
45 A Wheelbase 3300 (10'10")
K B Hinge pin height, max. height 4165 (13’8”)
J
B
H F G C Hinge pin height, carry position 520 (1'8")
M D Ground clearance 455 (1'6")
E
C D E Hitch height 1150 (3'9")
A F Overall height, top of the stack 2950 (9'8")
L G Overall height, ROPS cab 3380 (11'1")
M Tilt back angle 52°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Operating Weight Tipping Load Straight Tipping Load Full Turn
kg lb kg lb kg lb
Remove ROPS cab –660 –1,455 –650 –1,433 –625 –1,378
Remove additional counterweight –325 –717 –885 –1,951 –755 –1,661
Install ROPS canopy +430 +950 +425 +937 +410 +904
3A-74
Performance Data WHEEL LOADERS
Dimensions
WA450-5 (Canada source)
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 3010 (9'11")
A Wheelbase 3450 (11'4")
B Hinge pin height, max. height
45
K Standard boom 4360 (14'4")
J
B High lift boom 4870 (16’0”)
F G
H C Hinge pin height, carry position
M
E Standard boom 585 (1'11")
C D
High lift boom 730 (2’5”)
A
L D Ground clearance 525 (1'9")
E Hitch height 1240 (4'1")
F Overall height, top of the stack 3080 (10'2")
G Overall height, ROPS canopy 3460 (11'5")
M Tilt back angle 50°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in
Operating Tipping Load Tipping Load Ground
Weight Straight Full Turn Width over tires clearance vertical
Tires dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
26.5-25-20PR (L-4) +425 +937 +330 +728 +290 +639 3010 9'11" 525 1'9" +65 +2.6"
Remove ROPS cab –660 –1,455 –610 –1,345 –590 –1,300
Install ROPS canopy +430 +950 +360 +795 +345 +760
Remove additional
–400 –880 –950 –2,094 –790 –1,742
counterweight
3A-75
Performance Data WHEEL LOADERS
Dimensions
WA480-5 (Canada source)
Unit: mm (ft.in)
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45 A Wheelbase 3450 (11'4")
K
J B Hinge pin height, max. height 4505 (14'9")
B
H F G C Hinge pin height, carry position 585 (1'11")
M D Ground clearance 525 (1'9")
E
C D E Hitch height 1240 (4'1")
A F Overall height, top of the stack 3080 (10'1")
L G Overall height, ROPS cab 3500 (11'6")
M Tilt back angle 52°
• All dimensions, weights, and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight and
operator.
• Machine stability and operating weight affected by counterweight, tire size, and other attachments.
Weight Changes
Change in
Operating Tipping Load Tipping Load Width Ground
Vertical
Weight Straight Full Turn Over Tire Clearance
Dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in
Tires: 26.5-25-20PR (L-4) +360 +794 +250 +551 +220 +485 3010 9'11" 525 1'9" 0 0
Remove ROPS cab –660 –1,455 –550 –1,213 –530 –1,168
Install ROPS canopy +430 +950 +360 +795 +345 +760
Remove additional counterweight –400 –880 –950 –2,094 –790 –1,742
3A-76
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (USA source)
Unit: mm (ft.in)
29.5-25-22/PR(L-3)
Tread 2400 (7'10")
Width over tires 3190 (10'6")
A Wheelbase 3600 (11'10")
B Hinge pin height, max. height 4500 (14'9")
C Hinge pin height, carry position 565 (1'10")
D Ground clearance 450 (1'5')
E Hitch height 1240 (4'1")
F Overall height, top of the stack 3705 (12'2")
G Overall height, ROPS canopy 3860 (12'8")
All specs. are with teeth and 29.5-25-22/PR(L-3) tires, steel cab, ROPS canopy, lubricant, full fuel and
operator.
Standard Boom
General Purpose Loose Material Highlift Boom
Bucket Type Straight Edge General Purpose
Straight Edge w/Bolt On Straight Edge
w/B.O.C. Cutting Edge W/BOCE
SAE Rated m3 (cu.yd) 5.0 (6.5) 5.5 (7.2) 4.28 (5.6)
Bucket Capacity
Struck m3 (cu.yd) 4.6 (6.0) 5.1 (6.6) 3.6 (4.7)
Bucket Width mm (ft.in) 3400 (11'2") 3400 (11'2") 3400 (11'2")
Bucket Weight kg (lb) 2760 (6,072) 2923 (6,445) 2190 (4,828)
Straight kg (lb) 24000 (52,920) 23728 (52,322) 21765 (47,984)
Static Tipping Load
Full turn (40°) kg (lb) 20602 (45,427) 20376 (44,928) 18800 (41,447)
Dumping clearance, max. height and 45° dump angle mm (ft.in) 3170 (10'5") 3095 (10'2") 3700 (12'2")
Reach at 2130 mm (7') cutting edge clearance and
45° dump angle
mm (ft.in) 2025 (6'8") 2108 (6'11") 2430 (8'0")
Reach at max. height and 45° dump angle mm (ft.in) 1365 (4'6") 1448 (4'9") 1448 (4'9")
Height to hinge pin (fully raised) mm (ft.in) 3760 (12'4") 3910 (12'10") 3890 (12'9")
Operating Height (fully raised) mm (ft.in) 6175 (20'3") 6198 (20'4") 6520 (21'5")
Overall Length Bucket at carry mm (ft.in) 9105 (29'10") 9195 (30'2") 9790 (32'1")
Turning Radius (bucket at carry, outside corner of
bucket)
mm (ft.in) 7315 (24') 7366 (24'2") 7390 (24'2")
0° mm (ft.in) 150 (6") 94 (3.7") 145 (5.7")
Digging Depth
10° mm (ft.in) 375 (1'3") 384 (15.1") 365 (14.4")
Breakout Force kg (lb) 23700 (52,259) 21542 (47,500) 28450 (62,721)
Operating Weight** kg (lb) 30440 (67,120) 30609 (67,493) 30665 (67,605)
• Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE
standard J-732 and J-742b.
• Static tipping load and operating weight shown include lubricants, coolant, full fuel tank, ROPS cab, front fenders, optional
counterweight, 29.5-25-22PR (L3) tubeless tires and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Do not use tire ballast with optional counterweight.
• B.O.C.= Bolt on Cutting Edge
Weight Changes
Change in Operating Weight Change in Tipping Load kg (lb)
Tires & Options
kg (lb) Straight Full Turn
Remove Steel Cab –305 (–670) –260 (–570) –250 (–550)
Deduct Additional Counterweight –1000 (–2,200) –2400 (–5,280) –2000 (–4,400)
3A-77
Performance Data WHEEL LOADERS
Dimensions
WA65-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.7 1660 260* 3125
I Universal bucket with teeth
(0.92) (5'5") (573) (6,890)
1.0 1870 300* 3090
II Light-material bucket
(1.3) (6'2") (661) (6,810)
0.55 1700 490* 3480
III 4-in-1 bucket with teeth
(0.72) (5'7") (1,080) (7,670)
* without teeth
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
3A-78
Performance Data WHEEL LOADERS
Dimensions
WA70-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.85 1800 295* 3640
I Universal bucket with teeth
(1.11) (5'11") (650) (8,025)
1.0 1870 305 3540
II Light-material bucket without teeth
(1.3) (6'2") (672) (7,805)
1.25 1870 340 3160
III Light-material bucket without teeth
(1.64) (6'2") (750) (6,965)
0.75 1800 595* 3570
IV 4-in-1 bucket with teeth
(0.98) (5'11") (1,312) (7,870)
* without teeth
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
3A-79
Performance Data WHEEL LOADERS
Dimensions
WA80-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
0.9 1915 330* 4620
I Universal bucket with teeth
(1.18) (6'3") (728) (10,185)
1.0 1870 310 4270
II Light-material bucket without teeth
(1.3) (6'2") (683) (9,410)
1.25 1870 345 3790
III Light-material bucket without teeth
(1.64) (6'2") (760) (8,355)
0.80 1900 615 4290
IV 4-in-1 bucket without teeth (1.05) (6'3") (1,356) (9,460)
* without teeth
65
C R
E
d 47
a
c
b H
D 50
f F
e B
A
FVBH0008
3A-80
Performance Data WHEEL LOADERS
Dimensions
WA90-5 (Germany source)
Unit: mm (ft.in)
A Tread 1590 (5'3")
B Width over tires 1990 (6'6")
j
i
C Wheelbase 2300 (7'7")
D
h F D Hinge pin height, max. height 3425 (11'3")
E Ground clearance 350 (1'2")
E F Overall height, ROPS cab 2820 (9'3")
m
A C Turning radius at corner of tire 3925 (12'11")
B k
g
3A-81
Performance Data WHEEL LOADERS
Dimensions
WA100M-5 (Germany source)
Unit: mm (ft.in)
A Tread 1690 (5'7")
B Width over tires 2150 (7'1")
j
D i C Wheelbase 2400 (7'10")
h F D Hinge pin height, max. height 3565 (11'8")
E Ground clearance 420 (1'5")
m
E
F Overall height, ROPS cab 2875 (9'5")
A
B
C
k
Turning radius at corner of tire 4240 (13'11")
g
3A-82
Performance Data WHEEL LOADERS
Dimensions
WA115-3 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
1.3 2300 555 7475
I Universal bucket without teeth (1.7) (7'7") (1,225) (16,480)
1.2 2300 810 7290
II Multi purpose buket without teeth
(1.6) (7'7") (1,785) (16,075)
1.5 2310 600 6885
III Stock pile bucket without teeth (2.0) (7'7") (1,325) (15,175)
IV Light materials bucket without teeth 2.2 2500 875 5405
(2.9) (8'2") (1,930) (11,915)
Operating weight
kg(lb)
Tires/Buckets I II III IV
455/70 R24 SPT 9 7455 (16,435) 7735 (17,055) 7560 (16,665) 7800 (17,195)
3A-84
Performance Data WHEEL LOADERS
Dimensions
WA200-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
2.0 2540 895 9990
I Universal bucket with BOC (2.6) (8'4") (1,970) (22,020)
2.0 2540 925 10200
II Earth moving bucket with BOC
(2.6) (8'4") (2,040) (22,490)
2.1 2540 955 9790
III Stockpile bucket without BOC (2.7) (8'4") (2,105) (21,580)
Weight Changes
Operating weight Tipping load straight Tipping load full turn Overall length
Tires & Options
kg lb kg lb kg lb mm inch
Additional counterweight +306 +675 +615 +1,355 +475 +1050 — —
Equipment with teeth +50 +110 –30 –66 –35 –77 +190 7.5"
3A-85
Performance Data WHEEL LOADERS
Dimensions
WA250PT-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
2.0 2540 885 8970
I Universal bucket with BOC (2.6) (8'4") (1,950) (19,775)
2.0 2540 920 9075
II Earth moving bucket with BOC
(2.6) (8'4") (2,030) (15,600)
2.1 2540 965 8870
III Stockpile bucket without BOC (2.7) (8'4") (2,130) (19,555)
Weight Changes
Operating weight Tipping load straight Tipping load full turn Overall length
Tires & Options
kg lb kg lb kg lb mm inch
Equipment with teeth +50 +110 –50 –110 –50 –110 +190 7.5"
3A-86
Performance Data WHEEL LOADERS
Dimensions
WA250-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
2.1 2550 1040 13050
I Earth moving bucket without teeth (2.7) (8'4") (2,290) (28,770)
2.1 2550 910 12750
II Universal bucket without teeth
(2.7) (8'4") (2,010) (28,110)
2.4 2550 1040 12340
III Stockpile bucket without teeth (3.1) (8'4") (2,290) (27,200)
Weight Changes
Operating weight Tipping load straight Tipping load full turn Overall length
Tires & Options
kg lb kg lb kg lb mm inch
Additional counterweight +305 +670 +725 +1,600 +520 +1,150 — —
Equipment with teeth +100 +220 -60 -130 -115 -250 +225 8.9"
3A-87
Performance Data WHEEL LOADERS
Dimensions
WA250PT-5 (Germany source)
Capacity Bucket Bucket Breakout
Heaped width weight force
m3(cu.yd) mm (ft.in) kg (lb) kg (lb)
2.0 2550 910 12340
I Universal bucket with quick-coupler (2.6) (8'4") (2,010) (27,200)
2.4 2550 1040 11110
II Stockpile bucket with quick-coupler
(3.1) (8'4") (2,290) (24,490)
4.0 2750 1260 9480
III Light-material bucket with quick-coupler (5.2) (9'0") (2,780) (20,900)
3A-88
Performance Data WHEEL LOADERS
Dimensions
WA320-5 (Germany source)
Capacity Heaped Bucket width Bucket weight Breakout force
m3 (cu.yd) mm (ft.in)* kg (lb) kg (lb)
I Universal bucket without teeth 2.7 (3.5) 2740 (9'0") 1040 (2,293) 13670 (30,140)
II Universal bucket with BOC 2.9 (3.8) 2750 (9'0") 1255 (2,700) 12750 (28,110)
III Earthmoving bucket without teeth 2.7 (3.5) 2740 (9'0") 1120 (2,469) 13670 (30,140)
IV Earthmoving bucket with BOC 2.9 (3.8) 2750 (9'0") 1325 (2,910) 12750 (28,110)
V Stockpile bucket without teeth 3.0 (3.9) 2740 (9'0") 1265 (2,789) 13260 (29,230)
VI Stockpile bucket with BOC 3.1 (4.1) 2750 (9'0") 1475 (3,252) 12240 (26,980)
Operating weight*
kg(lb)
Tires/Buckets I II III IV V VI
14040 14255 14120 14325 14265 14475
20.5-R25 L3
(30,950) (31,430) (31,130) (31,580) (31,450) (31,910)
• All dimensions, weights and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, steel cab, ROPS canopy and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+520 +715 +920 +1,896 +660 +1,576 +146 +5.7
3A-89
Performance Data WHEEL LOADERS
Dimensions
WA320-5 (Germany source)
Measured with 23.5 R25 L3 tires
3A-90
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (Germany source)
* Excluding tire protectors
Operating weight
kg(lb)
Tires/Buckets I II III IV V VI VII VIII IX
17875 18090 17875 18090 17985 18200 18105 18320 18285
23.5-R25 L3 (39,410) (39,880) (39,410) (39,880) (39,650) (40,125) (39,945) (40,390) (40,310)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+325 +715 +860 +1,896 +715 +1,576 +146 +5.7
Equipment with teeth +100 +220 -100 -220 -110 -243 – –
3A-91
Performance Data WHEEL LOADERS
Dimensions
WA380-5 (Germany source)
Measured with 23.5 R25 L3 tires
3A-92
Performance Data WHEEL LOADERS
Dimensions
WA430-6 (Germany source)
Unit: mm (ft.in)
A Tread 2220 (7'3")
B Width over tires 2770 (9'1")
j C Wheelbase 2600 (8'6")
i
D
h
F D Hinge pin height, max. height 3695 (12'1")
E Ground clearance 455 (1'6")
E F Overall height, ROPS canopy 3375 (11'1")
m C
Turning radius at corner of tire 6035 (19'10")
A
B k
g
Weight Changes
Tipping load Change in
Operating Ground Change in
weight Width over tire clearance vertical reach
Straight Full turn dimensions
kg lb kg lb kg lb mm ft.in mm ft.in mm ft.in mm ft.in
23.5-R25 tires 0 0 0 0 0 0 2770 9'1" 455 1'6" 0 0 0 0
23.5-R25 VSDL*1 tires +820 +1,810 +615 +1,355 +550 +1,210 2775 9'1" 510 1'8" +55 +2.2" -65 -2.6"
650/65-R25 XL*2 tires -180 -400 -140 -310 -120 -265 2780 9'1" 410 1'4" -45 -1.8" +110 +4.3"
850/65-R25*2 tires +420 +925 +315 +1,280 +690 +1,520 2925 9'7" 405 1'4" -40 -1.6" +5 +0.2"
Additional counterweight +325 +720 +825 +1,820 +700 +1,540
Additional side counterweight +375 +825 +720 +1,590 +630 +1,390
*1 Bridgestone
*2 Michelin
3A-93
Performance Data WHEEL LOADERS
Dimensions
WA470-5 (Germany source)
* Excluding tire protectors
Operating weight
kg(lb)
Tires/Buckets I II III IV V VI VII VIII IX X
26.5-R25 L3 23135 22775 22975 23435 23425 23192 23195 23225 23535 23285
(51,000) (50,210) (50,650) (51,665) (51,645) (51,130) (51,135) (51,200) (51,885) (51,335)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+400 +882 +1030 +2,271 +860 +1,896 +190 +7.5
Equipment with teeth +140 +309 -140 -309 -140 -309 – –
3A-94
Performance Data WHEEL LOADERS
Dimensions
WA470-5 (Germany source)
Measured with 26.5 R25 L-3 tires
3A-95
Performance Data WHEEL LOADERS
Dimensions
WA480-5 (Germany source)
* Excluding tire protectors
Operating weight
kg(lb)
Tires/Bucket I II III IV V VI VII VIII IX X XI XII XIII
25755 25460 25653 25595 25788 25735 25928 25510 25703 25725 25913 25660 25860
26.5-R25 L3 (56,780) (56,130) (56,555) (56,425) (56,850) (56,735) (57,160) (56,240) (56,665) (56,715) (57,130) (56,570) (57,010)
• All dimensions, weights and performance values based on SAE J732c and J742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, steel cab, ROPS canopy and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+400 +882 +950 +2,094 +790 +1,742 +190 +7.5
Equipment with teeth +140 +309 -140 -309 -140 -309 – –
3A-96
Performance Data WHEEL LOADERS
Dimensions
WA480-5 (Germany source)
Measured with 26.5 R25 L-3 tires
3A-97
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (Germany source)
* Excluding tire protectors
Operating weight
kg(lb)
Tires/Bucket I II III IV V
29.5-R25 L3 29360 (64,725) 29470 (64,970) 29570 (65,190) 29820 (65,740) 30020 (66,180)
Weight Changes Operating weight Tipping load straight Tipping load full turn Overall length (A)
kg lb kg lb kg lb mm ft.in
Add. counterweight
+1000 +2,205 +1900 +4,189 +1600 +3,527 +141 +5.6
Tire inflation (29.5-R25) +1900 +4,189 +2820 +62,174 +2435 +5,368 – –
Equipment with teeth +250 +551 -250 -551 -270 -595 – –
3A-98
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (Germany source)
Measured with 29.5 R25 L-3 tires
Buckets I II III IV V
(Capacities in accordance with ISO 7546) 4.5 5.0 5.5 4.5 5.0
m3 (yd3) (5.9) (6.5) (7.2) (5.9) (6.5)
1274 1323 1415 1486 1535
a Reach at 45º mm (ft.in)
(4'2") (4'4") (4'8") (4'11") (5')
3251 3195 3103 3039 2983
b Dump height at 45º mm (ft.in) (10'8") (10'6") (10'2") (10') (9'9")
4496 4496 4496 4496 4496
c Hinge pin height mm (ft.in) (14'9") (14'9") (14'9") (14'9") (14'9")
d Height top edge of bucket mm (ft.in) 6072 6160 6263 6229 6160
(19'11") (20'3") (20'7") (20'5") (20'3")
e Dig depth mm (ft.in) 124 124 124 124 124
(4'9") (4'9") (4'9") (4'9") (4'9")
f Overload height mm (ft.in) 4105 4105 4105 4105 4105
(13'6") (13'6") (13'6") (13'6") (13'6")
9127 9197 9328 9427 9497
A Overall length, bucket grounded mm (ft.in)
(29'11") (30'2") (30'7") (30'11") (31'2")
3600 3600 3600 3600 3600
B Wheelbase mm (ft.in) (11'10") (11'10") (11'10") (11'10") (11'10")
3460 3460 3460 3460 3460
C Bucket width mm (ft.in) (11'4") (11'4") (11'4") (11'4") (11'4")
3190 3190 3190 3190 3190
D Width over tires mm (ft.in) (10'6") (10'6") (10'6") (10'6") (10'6")
2400 2400 2400 2400 2400
E Track width mm (ft.in)
(7'10") (7'10") (7'10") (7'10") (7'10")
450 450 450 450 450
F Ground clearance mm (ft.in)
(1'6") (1'6") (1'6") (1'6") (1'6")
3650 3650
G Width over stone deflectors mm (ft.in) – – – (12') (12')
3860 3860 3860 3860 3860
H Overall height mm (ft.in) (12'8") (12'8") (12'8") (12'8") (12'8")
3A-99
Performance Data WHEEL LOADERS
Dimensions
WA320-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
2.3 2.0 2760 13050
I General-purpose bucket with teeth (3.0) (2.6) (9'1") (28,770)
II General-purpose bucket with bolt-on cutting edges;
2.5 2.3
(Loading and excavating of soil, sand and variety of
(3.3) (3.0)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab –310 (–683)
Unit: mm (ft.in)
20.5-25 tires
Tread 2050 (6'9")
Width over tires 2585 (8'6")
45
K A Wheelbase 3030 (9'11")
J
B B Hinge pin height, max. height 3885 (12'9")
F G
H C Hinge pin height, carry position 450 (1'6")
M
E D Ground clearance 400 (1'4")
C D
E Hitch height 1190 (3'11")
A
L F Overall height, top of the stack 3205 (10'6")
FVBH0030
G Overall height, ROPS cab 3335 (10'11")
M Tilt back angle 48°
3A-100
Performance Data WHEEL LOADERS
Dimensions
WA380-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.0 2.5 2915 17130
I General-purpose bucket with teeth (3.9) (3.3) (9'7") (37,760)
II General-purpose bucket with bolt-on cutting edges;
3.1 2.7
(Loading and excavating of soil, sand and variety of
(4.0) (3.5)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab –310 (–683)
Unit: mm (ft.in)
23.5-25 tires
Tread 2160 (7'1")
Width over tires 2780 (9'1")
45
K A Wheelbase 3200 (10'6")
J
B B Hinge pin height, max. height 4095 (13'5")
F G
H C Hinge pin height, carry position
M
E D Ground clearance 455 (1'6")
C D
E Hitch height 1150 (3'9")
A
L F Overall height, top of the stack 3345 (11'0")
FVBH0030
G Overall height, steel cab 3410 (11'2")
M Tilt back angle 46°
3A-101
Performance Data WHEEL LOADERS
Dimensions
WA420-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.5 3.0 3065 19940
I General-purpose bucket with teeth (4.6) (3.9) (10'1") (43,960)
II General-purpose bucket with bolt-on cutting edges;
2.3
(Loading and excavating of soil, sand and variety of
(3.0)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab –310 (–683)
Unit: mm (ft.in)
23.5-25 tires
Tread 2200 (7'3")
Width over tires 2820 (9'3")
45
K A Wheelbase 3300 (10'10")
J
B B Hinge pin height, max. height 4250 (13'11")
F G
H C Hinge pin height, carry position
M
E D Ground clearance 460 (1'6")
C D
E Hitch height 1175 (3'10")
A
L F Overall height, top of the stack 3340 (11'0")
FVBH0030
G Overall height, steel cab 3400 (11'2")
M Tilt back angle 46°
3A-102
Performance Data WHEEL LOADERS
Dimensions
WA470-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
3.9 3.3 3200 21000
I General-purpose bucket with teeth (5.1) (4.3) (10'6") (46,300)
II General-purpose bucket with bolt-on cutting edges;
4.2 3.5
(Loading and excavating of soil, sand and variety of
(5.5) (4.6)
other commonly handled materials.)
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab –310 (–683)
Unit: mm (ft.in)
26.5-25 tires
Tread 2300 (7'7")
Width over tires 3010 (9'11")
45
K A Wheelbase 3400 (11'2")
J
B B Hinge pin height, max. height 4355 (14'3")
F G
H C Hinge pin height, carry position
M
E D Ground clearance 525 (1'9")
C D
E Hitch height 1240 (4'1")
A
L F Overall height, top of the stack 3470 (11'5")
FVBH0030
G Overall height, steel cab 3490 (11'5")
M Tilt back angle 49°
3A-103
Performance Data WHEEL LOADERS
Dimensions
WA500-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
4.5 3460 27000
I General-purpose bucket with teeth (5.9) (11'4") (59,520)
II Stock pile bucket with bolt-on cutting edges;
5.0
(Loading and excavating of soil, sand and variety of
(6.5)
other commonly handled materials.)
4.3
III Rock bucket (spade nose) (5.6)
4.2
IV Bucket for high lift (5.5)
• All dimensions, weights and performance values based on SAE J-732c and J-742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab,and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab
Unit: mm (ft.in)
26.5-25 tires
Tread 2400 (7'10")
Width over tires 3090 (10'2")
45
K A Wheelbase 3600 (11'10")
J
B B Hinge pin height, max. height 4455 (14'7")
F G
H
M
C Hinge pin height, carry position
E D Ground clearance 405 (1'4")
C D
E Hitch height 1195 (3'11")
A
L F Overall height, top of the stack 3590 (11'9")
FVBH0030
G Overall height, steel cab 3815 (12'6")
M Tilt back angle 50°
3A-104
Performance Data WHEEL LOADERS
Dimensions
WA600-3 (China source)
Capacity Struck Bucket Bucket Breakout
Heaped m3 width weight force
m3(cu.yd) (cu.yd) mm (ft.in) kg (lb) kg (lb)
6.1 3685 37600
I Excavcating bucket (spade nose) with teeth (8.0) (12'1") (82,890)
6.1
II General purpose bucket with teeth. (8.0)
6.1
III Rock bucket (spade nose) with teeth (8.0)
5.6
IV Bucket for high lift (7.3)
• All dimensions, weights and performance values based on SAE J-732c and J-742b standards.
• Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab,and operator.
• Machine stability and operating weight are affected by counterweight, tire size and other attachments.
Apply the following weight changes to operating weight and static tipping load.
Weight Changes Change in operating weight kg (lb) Change in tipping load kg (lb)
Straight Full turn
Steel ROPS cab
Unit: mm (ft.in)
35/65-33 tires
Tread 2650 (8'8")
Width over tires 3570 (11'9")
45
K A Wheelbase 4100 (13'5")
J
B B Hinge pin height, max. height 5155 (16'11")
F G
H C Hinge pin height, carry position
M
E D Ground clearance 495 (1'7")
C D
E Hitch height 1295 (3'3")
A
L F Overall height, top of the stack 4125 (13'6")
FVBH0030
G Overall height, steel cab 4250 (13'11")
M Tilt back angle 49.5°
3A-105
Performance Curves WHEEL LOADERS
Travel Time Charts
Example:
Haul... Return...
Using the graph for the Loaded machine, read from Using the graph for the Empty machine, read from
the Travel Distance (one way) scale at 300 m (980 the Travel Distance (one way) scale at 400 m (1310
feet) across to the 6% total resistance line (point A). feet) across to the 2% total resistance line (point A).
From (point A) read down to the Travel Time (one From (point A) read down to the Travel Time (one
way) scale to determine haul time = 1.5 minutes. way) scale to determine haul time = 1.0 minutes
LOADED EMPTY
DISTANCE TRAVELED
2%
TOTAL RESISTANCE
DISTANCE TRAVELED
700
TOTAL RESISTANCE
700
2000 4%
2000 600 600
2% 6%
500 4% 500
1500 1500 A
400m 8%
400 6% 400
6%
300m A 8% 1000 300 10%
1000 300
10%
15%
200 15% 200 20%
500 20% 500
100 100
1.5 1.0
0 0 0 0
0 0.5 1.0 1.5 2.0 (Minutes) 0 0.5 1.0 1.5 2.0 (Minutes)
TIME TIME
p
3A-106
Performance Curves WHEEL LOADERS
Travel Time Charts
WA500-3 LOADED
(feet) (m)
1000
3000 900
800
2500 2%
TOTAL RESISTANCE
700
2000 600
4%
500
1500
6%
400
8%
1000 300 10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0274
WA500-3 EMPTY
(feet) (m)
1000
3000 900 2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700 4%
2000 600
6%
500
1500 8%
400 10%
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0273
3A-107
Performance Curves WHEEL LOADERS
Travel Time Charts
WA600-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700 2%
2000 600
500 4%
1500
400 6%
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0276
WA600-3 EMPTY
(feet) (m)
1000
3000 900
2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 4%
600
6%
500
1500
400 8%
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0275
3A-108
Performance Curves WHEEL LOADERS
Travel Time Charts
WA700-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 600
500 4%
1500
6%
400
8%
1000 300 10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0278
WA700-3 EMPTY
(feet) (m)
1000
3000 900
2%
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
4%
2000 600
500 6%
1500
8%
400
10%
1000 300
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0277
3A-109
Performance Curves WHEEL LOADERS
Travel Time Charts
WA800-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2%
2000 600
500 4%
1500
6%
400
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0280
WA800-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
2%
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600 4%
500
1500 6%
400
8%
1000 300 10%
15%
200
20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0279
3A-110
Performance Curves WHEEL LOADERS
Travel Time Charts
WA900-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 2%
600
500
1500 4%
400
6%
1000 300 8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0282
WA900-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
2%
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600
4%
500
1500
6%
400
8%
1000 300 10%
15%
200
20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0281
3A-111
Performance Curves WHEEL LOADERS
Travel Time Charts
WA1200-3 LOADED
(feet) (m)
1000
3000 900
800
2500
TOTAL RESISTANCE
700
2000 600
2%
500
1500
4%
400
1000 300 6%
8%
10%
200 15%
500 20%
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0284
WA1200-3 EMPTY
(feet) (m)
1000
3000 900
800
2500
(ROLLING PLUS GRADE)
DISTANCE TRAVELED
TOTAL RESISTANCE
700
2000 600 2%
500 4%
1500
400 6%
1000 300 8%
10%
15%
200 20%
500
100
0 0
0 0.5 1.0 1.5 2.0 (Minutes)
TIME
FVBH0283
3A-112
Definitions WHEEL LOADERS
1. OPERATING WEIGHT
The total mass in kilograms (pounds) of the machine as specified and fully serviced, including a full fuel
tank and 80 kg (175 Ib) operator.
The struck capacity is defined as the volume of material retained in the bucket after a heaped load is
struck by drawing a straight edge across the width of bucket with one end of the straight edge resting on
the cutting edge and the other end resting on the uppermost portion of the bucket back sheet or spill
guard. The struck capacity (Vs) can be expressed by the following equation:
2 2
Vs = AW – ab
3
A = cross sectional area at the center of the TOP OF b
bucket, mm2 (in2.). SPILL b BIT W
GUARD 2
W = average inside width of the bucket, mm 2 2
1
(in.). HEAP 90 c 1
a
a = height of the spill guard at the center of
A
the bucket normal to the strike line, mm
(in.).
b = length of opening at the center of the
bucket, mm (in.). FVBH0009
b2W b2
Vh = Vs + – (a+c)
8 6
Where c is the length on a normal to the strike line. On one end it is terminated by the assumed crest of
the material.
On the other end it is terminated by the intersection with a line from the bit or cutting edge tip to the base
of the spill guard.
This method applies primarily to irregular buckets having parallel sides and a cutting edge parallel to the
edge of the spill guard or back sheet. Moderately clipped spill guard corners will introduce no appreciable
errors.
3. RATED LOAD
The rated load (operating load) will not exceed 50% of the TIPPING LOAD for wheel loaders or 35% of the
TIPPING LOAD for crawler loaders, and will be considered as operating under the following conditions:
1. Lifting ability of the machine in all bucket positions to be no less than the specified operating load.
2. Bucket attachment of specified size and type.
3. Maximum travel speed of 6 km/h (3.7 mph).
4. Operating surface.
(a) Shall be hard, moderately smooth and level for wheel loaders.
(b) General operating conditions of crawler loaders are such that they normally are not operating on
hard, moderately smooth level surface.
For this reason, the rating on crawler loaders is set at the lower figure of 35%.
4. BREAKOUT FORCE
Breakout force in kilograms (and kilo-Newton or
pounds) is the maximum sustained vertical Breakout Force
upward force exerted 100 mm (4 in) behind the tip Bucket edge
of the bucket cutting edge and is achieved
through the ability to lift and/or roll-back the 4" (101.6mm)
bucket about the specified pivot point under the
following conditions:
Breakout force
(a) Machine with transmission in neutral. FVBH0010
(b) All brakes released.
(c) Unit at standard operating weight, rear of machine not tied down.
3A-113
Definitions WHEEL LOADERS
(d) Bottom of cutting edge parallel to and not more than 25 mm (1 in) above or below the ground line.
(e) When bucket circuit is used, the pivot point must be specified as the bucket hinge pin, and the unit
blocked under the bucket hinge pin pivot point in order to minimize linkage movement.
(f) When the lift circuit is used, the pivot point must be specified as the lift arm hinge pin.
Wheel loaders shall have front axle blocked to eliminate change in position of pivot pins due to tire
deflection.
(g) If both circuits are used simultaneously, the dominating pivot point listed in (e) or (f) must be specified.
(h) If the circuit used causes the rear of the machine to leave the ground then the vertical force value
required to raise the rear of the machine is the breakout force.
(i) For irregular shaped buckets, the tip of the bucket cutting edge, referred to above shall mean the
farthest forward point of the cutting edge.
6. LIFTING CAPACITY
The maximum mass in kilograms (pounds) at the
center of gravity of SAE rated load in the bucket
that can be lifted at a specified height with the Fixed
bucket positioned to retain maximum load under
the following conditions:
(a) Machine with rear end tied down.
(b) Machine at operating weight and equipment Lifting Capacity
as specified. FVBH0012
3A-114
Definitions WHEEL LOADERS
9. CARRY POSITION
The vertical distance from the ground in
millimeters (inches) to the centerline of the bucket
hinge pin, with the angle of approach at 15 B 15
degree.
3A-115
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
3A-116
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA320-3
WA250PT-5 WA320-5 WA380-6 WA380-5 WA380-3
CUSTOM
W/B.O.C 2.0 (2.6) 2.8 (3.7) 2.7 (3.55) 3.3 (4.3) 3.3 (4.3) 3.2 (4.2)
GENERAL PURPOSE
BUCKET W/teeth
(STOCKPILE) 2.6 (3.25) 2.5 (3.25) 3.1 (4.1) 3.1 (4.1) 3.0 (3.9)
W/segment
edge 3.2 (4.2)
W/B.O.C
2.3 (3.0) 2.9 (3.8) 2.9 (3.8) 2.8 (3.65)
GENERAL PURPOSE
W/teeth
BUCKET (EXCAVATING) 2.1 (2.75) 2.7 (3.5) 2.7 (3.5) 2.6 (3.4)
W/segment
edge 2.9 (3.8) 2.9 (3.8) 2.8 (3.65)
SPADE NOSE ROCK W/tip type
BUCKET teeth
W/B.O.C
LIGHT MATERIAL 3.2 (4.2) 4.0 (5.2) 4.0 (5.2) 4.0 (5.25)
BUCKET
BARE
3.0 (3.9) 3.8 (4.95)
LIGHT MATERIAL For multi-
BUCKET coupler 2.5 (3.25) 3.1 (4.0)
GENERAL PURPOSE W/B.O.C 2.4 (3.0) 2.9 (3.8) 2.9 (3.8) 2.8 (3.65)
BUCKET (STOCKPILE)
FOR HIGH LIFT BOOM W/teeth 2.2 (2.75) 2.7 (3.5) 2.7 (3.5) 2.6 (3.4)
GENERAL PURPOSE
BUCKET FOR SUPER W/B.O.C
HIGH LIFT
BOOM(STOCKPILE) W/teeth
HIGH LIFT BOOM
SUPER-HIGH LIFT BOOM
B.O.C (BOLT ON
CUTTING EDGE)
B.O.C, LONG LIFE
SEGMENT EDGE
Bolt-on teeth
Bolt-on teeth
for
limestone
TEETH
Bolt-on teeth
for long life
Tip type
teeth
LOG GRAPPLE Pin on type
LUMBER GRAPPLE
Pin-on type
DUMPING FORK
Multi-coupler
Pin-on type
LUMBER FORK
Multi-coupler
EXTENSION FORK
Mech. type
MULTI-COUPLER
Hyd. type
Additional (STD)
COUNTERWEIGHT
For log & fork
BUCKET CYLINDER
(LARGE SIZED)
For log & fork
BUCKET CYLINDER For high lift
3A-117
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA420-3 WA430-5 WA450-5 WA470-6 WA470-5 WA470-3 WA480-6
W/B.O.C
3.7 (4.85) 3.7 (4.8) 4.2 (5.5) 4.2 (5.5) 4.2 (5.5) 4.2 (5.5) 4.6 (6.0)
GENERAL PURPOSE BUCKET
W/teeth
(STOCKPILE) 3.5 (4.6) 3.5 (4.6) 3.9 (5.1) 3.9 (5.1) 3.9 (5.1) 4.3 (5.6)
W/segment edge
3.7 (4.85) 4.2 (5.5)
W/B.O.C
3.3 (4.3) 3.3 (4.3) 3.9 (5.0) 3.8 (5.0) 3.8 (5.0) 3.8 (4.95) 4.1 (5.4)
GENERAL PURPOSE BUCKET
W/teeth
(EXCAVATING) 3.1 (4.0) 3.1 (4.1) 3.6 (4.7) 3.6 (4.7) 3.6 (4.7) 3.6 (4.7) 3.8 (5.0)
W/segment edge
3.3 (4.3) 3.8 (5.0) 3.8 (5.0) 3.8 (4.95) 4.1 (5.4)
W/B.O.C
3.3 (4.3) 3.3 (4.3) 3.8 (5.0) 3.8 (5.0) 3.8 (4.95)
GENERAL PURPOSE BUCKET FOR
HIGH LIFT BOOM (STOCKPILE) W/teeth
3.1 (4.0) 3.1 (4.0) 3.6 (4.7) 3.6 (4.7)
W/O teeth
3A-118
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA480-5 WA500-6 WA500-3 WA600-6 WA600-3 WA700-3 WA800-3
W/B.O.C
4.6 (6.0) 5.6 (7.3) 5.0 (6.5)
GENERAL PURPOSE BUCKET
W/teeth
(STOCKPILE) 4.3 (5.6) 5.3 (6.9) 4.7 (6.1) 9.4 (12.3)
W/segment edge
7.0 (9.2) 9.4 (12.3)
W/B.O.C
4.1 (5.4) 5.2 (6.8) 4.5 (5.9) 6.4 (8.4)
GENERAL PURPOSE BUCKET
W/teeth
(EXCAVATING) 3.8 (5.0) 5.0 (6.5) 4.3 (5.6) 6.5 (8.5) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
W/segment edge
4.1 (5.4) 5.2 (6.8) 4.5 (5.9) 8.7 (11.4)
W/B.O.C
GENERAL PURPOSE BUCKET FOR W/teeth
4.2 (5.5) 5.6 (7.3)
HIGH LIFT BOOM (STOCKPILE)
W/O teeth
5.6 (7.3)
W/B.O.C
4.5 (5.9) 4.2 (5.5)
GENERAL PURPOSE BUCKET
(EXCAVATING) FOR HIGH LIFT W/teeth
4.3 (5.6) 4.0 (5.25) 5.6 (7.3)
STRAIGHT EDGE
W/segment edge
4.5 (5.9) 4.2 (5.5)
W/B.O.C
LOOSE MATERIAL BUCKET 4.9 (6.4)
BARE
W/B.O.C
6.1 (8.0) 5.5 (7.15)
LIGHT MATERIAL BUCKET
BARE
5.2 (6.8)
W/tip type teeth
4.3 (5.6) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
SPADE NOSE ROCK BUCKET
W/O teeth
(V-EDGE) 4.3 (5.6) 6.1 (8.0) 8.7 (11.4) 11.0(14.4)
W/segment edge
6.4 (8.4)
W/ teeth
SPADE NOSE STOCK 12.3(16.1)
PILE
W/B.O.C
11.0(14.4)
W/tip type teeth
SPADE NOSE ROCK BUCKET 5.6 (7.3) 10.0(13.1)
(V-EDGE) FOR HIGH LIFT BOOM
W/O teeth
5.6 (7.3)
SPADE NOSE ROCK BUCKET (V-
Tip type teeth with
EDGE) FOR LOAD & CARRY SPECS,
Weld-on 7.5 (9.8) 14 (18.3)
WITH SHORT ARM.
ROCK BUCKET W/teeth
(STRAIGHT EDGE) W/O teeth
W/teeth bolt on
HEAVY-DUTY BUCKET segments 5.0 (6.5) 4.5 (5.9) 8.7 (11.4) 11.0 (14.4)
(SPADE NOSE)
W/O teeth
4.7 (6.1)
COAL BUCKET
11.0(14.4) 20.5(26.8)
HIGH LIFT BOOM *3 *4 *5
SHORT BOOM
SHORT For load & carry specs. *6 *7
BOOM For stone handling specs.
BOC(BOLT ON CUTTING EDGE)
BOC, LONG LIFE
SEGMENT EDGE
Bolt-on teeth
Bolt-on teeth for long life
Bolt-on teeth for limestone
Tip type bolt on
Tip type teeth for semi-long
TEETH
Tip type weld on
Tip type weld on (sharp)
Tip type teeth for long life
Tip type teeth for limestone
(sharp)
LOG GRAPPLE *8 *8
Additional
For log & fork ATT.
COUN- For high lift boom
TER- For load & carry specs, with
WEIGHT short boom
For stone handling specs,with
short boom
*3 : Install the 4.2 m33 (5.5 cu.yd) general purpose bucket and counterweight for high lift boom.
*4 : Install the 5.6 m (7.3 cu.yd) general purpose bucket and counterweight for high lift boom.
*5 : Install the 10.0 m 3
(13.1 cu.yd) bucket and additional counterweight.
*6 : Install the 7.5 m3 (9.8 cu.yd) spade nose bucket and counterweight for load & carry specs.
*7 : Install the 14.0 m3 (18.3 cu.yd) spade nose bucket and additional counterweight.
*8 : Install the counterweight for log & fork attachments.
3A-119
Attachment WHEEL LOADERS
Availability
Unit: m3 (cu.yd)
WA900-3 WA1200-3
GENERAL PURPOSE W/B.O.C
BUCKET
(STOCKPILE) W/teeth
3A-120
Bucket Features WHEEL LOADERS
5. Heavy-duty Bucket:
This bucket is used for digging and loading blasted rock on rubble mounds and rock
crushing job sites. It has 1-class-larger teeth, and a large, thicker wear plate, large
corner edge/side guard, and strengthened spill guard.
NOTE: When installing this bucket on machines other than the WA700 or WA800, to
maintain the stability of the machine, please install an additional
counterweight and an orifice (or retainer) for reducing the dumping shock of
the bucket .
6. Chip Bucket:
This is a large bucket used for loading loose materials with low specific gravity [below
0.55 t/m3 (930 lb/cu.yd)], such as chips and grain. The back and top are made of a
wire mesh to reduce the weight. This bucket can demonstrate its power in bucket
operations in the paper-manufacturing business and sawmills.
7. Skeleton Bucket:
This bucket is used for digging and loading blasted rock on rubble mounds and rock
crushing job sites. It has a lattice structure allows it to sift out soil and small rocks,
thereby enabling it to select only the rock materials.
9. Multi-purpose Bucket:
This is a versatile bucket that performs scraping, dozing, scooping and various other
tasks in addition to excavating and loading jobs. It is especially suited to leveling work
and material transport.
3A-121
Teeth Features WHEEL LOADERS
FVBH0217
2. Bolt-on Teeth:
These teeth are suitable for loading or excavation of piles of earth or sand, blasted
rock, and jobs in the field that involve digging into the side of slopes. The special
heat treated, tensile strength steel alloy used in their production assures that they
will wear and have a long service life.
FVBH0218
3. Tip-type Teeth:
These teeth tips which are attached to an adapter that is welded or bolted to the
bucket edge. This means that an interchangeable part, the tooth tip, absorbs most
of the wear and protects the actual bucket edge. They give excellent performance
when used to handle blasted rock, piles of earth and similarly heavy duty tasks.
FVBH0219
FVBH0220
3A-122
Bucket Selection WHEEL LOADERS
Coal bucket
Scooping of light material Light material bucket
Is size of material Yes
to A
40mm or smaller?
No
Consult Komatsu.
Excavating bucket
(straight ege)
No
Consult Komatsu.
Bucket capacity
m3
Bucket capacity is On the chart, draw a ver-
A tical line corresponding to
determined by using
a selection chart. the material density.
Optimum capacity
of bucket is one On the chart, draw a ver-
Is material Yes
B corresponding to tical line corresponding to
density 1.6
material density 1.6 the material density.
or more?
on a selection chart
or smaller bucket. No 3
Consult Komatsu. 1.6 1.8 kg/m3 x 1000
Material density
Optimum capacity
of bucket is one
corresponding to Is material On the chart, draw a ver-
Yes
C material density 1.8 density 1.8 tical line corresponding to
on a selection chart or more? the material density.
or smaller bucket.
No
Consult Komatsu. Select this capacity
bucket or smaller one.
3A-123
Bucket Selection WHEEL LOADERS
The appropriate bucket capacity for each model is determined in relation with the density of material that the
bucket carries.
The graphs are shown for the models WA120-3. The capacity of the currently available buckets for each
model are shown there. Komatsu can develop other sizes of buckets according to these graphs, if it is
requested through a distributor.
Bucket capacity in the graphs means SAE heaped capacity (Calculation method indicated on page 4A-88).
The line in the graph shows the case when the bucket fill factor is 100%.
WA150-5
1.7 m3 Light Material Bucket
(2.2 cu.yd) (Scooping and loading of light material)
Bucket capacity: m3 (cu.yd)
WA200-5
2.4 m3 Light Material Bucket
(3.1 cu.yd) (Scooping and loading of light material)
Bucket capacity: m3 (cu.yd)
WA200PT-5
1.8 m3 Stockpile Bucket
(2.4 cu.yd) (Loading and excavating of soil, sand and a
100
90
105
Bucket capacity: m3 (cu.yd)
Bu
2.6
Bu
material)
Bu
ck
c
(3.4)
k
et
cke
et
Fi
Fil
tF
ll
l
ill
2.2
(2.8)
1.8 1.8m3 2.4yd3
Stockpile Backet
(2.4)
1.4
(1.8)
1.0
(1.3)
3A-124
Bucket Selection WHEEL LOADERS
WA250-5
2.7 m3 Light Material Bucket
(3.5 cu.yd) (Scooping and loading of light material)
Bucket capacity: m3 (cu.yd)
Bucket fill factor
2.7
(3.5)
2.3 m3 Stockpile Bucket
115 100 95% (3.0 cu.yd) (Loading and excavating of soil, sand and a
2.3 variety of other commonly handled
(3.0) material)
WA250PT-5
2.0 m3 Stockpile Bucket
(2.6 cu.yd) (Loading and excavating of soil, sand and a
10
90
1 05
Bu
material)
Bu
2.8
Bu
ck
c
et
ke
cke
(3.7)
Fi
tF
ll
tF
il l
ill
2.4
(3.1)
2.0 2.0m3 2.6yd3
Stockpile Backet
(2.6)
1.6
(2.1)
1.2
(1.6)
WA320-5
3.2 m3 Light Material Bucket
(4.2 cu.yd) (Scooping and loading of light material)
Bucket capacity: m3 (cu.yd)
WA320-3 CUSTOM
cu.yd m3 Capacity
Heaped Struck
m3
Bucket capacity
4.2 3.2
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and 2.7 2.3
3.25 2.5
excavating of soil, sand and variety of (3.53) (3.01)
other commonly handled materials)
3.0 2.3
2.5 1.95
2.75 2.1 II General-purpose bucket with teeth (3.0) (2.55)
1.2 1.4 1.6 1.8 2.0 2.2
III Excavating bucket with bolt-on cutting 2.3 1.95
kg/m3 x 1000 edges (3.0) (2.55)
2 2.5 3 3.5 IV Excavating bucket with teeth (Loading 2.1 1.8
Material density
lb/cu.yd
and excavating of crushed rock and (2.75) (2.35)
blasted rock)
V Light material bucket with bolt-on
3.2 2.8
cutting edges; (A lighter-weight, large- (4.2) (3.7)
capacity bucket)
3A-125
Bucket Selection WHEEL LOADERS
WA380-6
Bucket capacity: m3 (cu.yd) Bucket fill factor 4.0 m3 Light Material Bucket with BOC (Scooping
(5.2 cu.yd) and loading of light material)
4.0
(5.2) 115 100 95% 3.3 m3 General Purpose Bucket with BOC
3.3 (4.3 cu.yd) (Loading and excavating of soil, sand and
(4.3) variety of other commonly handled
material)
2.9
(3.8) 2.9 m3 Excavating Bucket with BOC
(3.8 cu.yd) Excavating Bucket with Teeth and
2.7 Segment Edge (Loading and excavating of
(3.5) crushed or blasted rock)
1000 1200 1400 1600 1800 2000 2200 kg/m3
2.7 m3 Excavating Bucket with Teeth
2000 2500 3000 3500 lb/yd3 (3.5 cu.yd) (Loading and excavating of blasted rock)
Material density FVBH0392
WA380-5
4.0 m3 Light Material Bucket with BOC (Scooping
Bucket fill factor (5.2 cu.yd) and loading of light material)
Bucket capacity: m3 (cu.yd)
4.0
(5.2) 3.3 m3 General Purpose Bucket with BOC
115 100 95% (4.3 cu.yd) (Loading and excavating of soil, sand and
3.3 variety of other commonly handled
(4.3) material)
2.9 2.9 m3 Excavating Bucket with BOC
(3.8) (3.8 cu.yd) Excavating Bucket with Teeth and
Segment Edge (Loading and excavating of
2.7
(3.5) crushed or blasted rock)
1000 1200 1400 1600 1800 2000 2200 kg/m3 2.7 m3 Excavating Bucket with Teeth
(3.5 cu.yd) (Loading and excavating of blasted rock)
2000 2500 3000 3500 lb/cu.yd
FVBH0185A
WA380-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and 3.2 2.7
excavating of soil, sand and variety of (4.2) (3.55)
other commonly handled materials)
3.0 2.6
II General-purpose bucket with teeth
(3.9) (3.9)
III Excavating bucket with bolt-on cutting 2.8 2.35
edges (3.65) (3.07)
IV Excavating bucket with teeth;
(Loading and excavating of crushed 2.6 2.2
(3.4) (2.9)
rock and blasted rock)
V Light material bucket with bolt-on
4.0 3.4
cutting edges; (A lighter-weight, large- (5.25) (4.45)
capacity bucket)
3A-126
Bucket Selection WHEEL LOADERS
WA420-3
cu.yd m3 Capacity
5.0 Heaped Struck
m3
4.2 4.6 (cu.yd)
I General-purpose bucket with bolt-on
Bucket capacity
WA430-5
4.6 m3 Light Material Bucket with BOC
Bucket fill factor (6.0 cu.yd) (Scooping and loading of light material)
4.6
(6.0) 3.7 m3 General Purpose Bucket with BOC
Bucket capacity: m3 (cu.yd)
115 100 95% (4.8 cu.yd) (Loading of crushed stone and dry sand)
3.7
(4.8) 3.5 m3 General Purpose Bucket with Teeth
(4.6 cu.yd) (Loading and excavating of soil, sand and
3.5 variety of other commonly handled
(4.6) material)
3.3 3.3 m3 Excavating Bucket with BOC
(4.3) (4.3 cu.yd) Excavating Bucket with Bolt-on Teeth and
Segments
3.1 (Loading or excavating of blasted rock)
(4.1)
1000 1200 1400 1600 1800 2000 2200 kg/m3 3.1 m3 Excavating Bucket with Teeth
3
(4.1 cu.yd) Rock Bucket with Teeth (Spade Nose)
2000 2500 3000 3500 lb/yd (Loading or excavating of blasted rock)
Material density FVBH0329
WA470-6
Bucket fill factor 5.2 m3 Light Material Bucket with BOC
(6.8 cu.yd) (Scooping and loading of light material)
5.2
(6.8)
Bucket capacity: m3 (cu.yd)
3A-127
Bucket Selection WHEEL LOADERS
WA470-5
5.2 m3 Light Material Bucket with BOC
Bucket fill factor
(6.8 cu.yd) (Scooping and loading of light material)
5.2
(6.8) 4.6 m3 Loose Material Bucket with BOC
Bucket capacity: m3 (cu.yd)
WA470-3
Capacity
Heaped Struck
m3
(cu.yd)
I General-purpose bucket with bolt-on
cutting edge; (Loading and excavating of 4.2 3.6
soil, sand and variety of other commonly (5.5) (4.7)
handled materials)
3.9 3.4
II General-purpose bucket with teeth
(5.1) (4.45)
III Excavating bucket with bolt-on cutting 3.8 3.3
edges (5.0) (4.3)
IV Excavating bucket with teeth; (Loading
3.6 3.1
and excavating of crushed rock and
(4.7) (4.05)
blasted rock)
V Light material bucket with bolt-on cutting
5.2 4.5
edges; (A lighter-weight, large-capacity
(6.8) (5.9)
bucket)
VI Rock bucket with teeth; (Spade nose). 3.5 3.0
(Loading and excavating of blasted rock) (4.6) (3.9)
WA480-6
Bucket fill factor 5.2 m3 Light Material Bucket with BOC
(6.8 cu.yd) (Scooping and loading of light material)
6.1
(8.0)
Bucket capacity: m3 (cu.yd)
3A-128
Bucket Selection WHEEL LOADERS
WA480-5
6.1 m3 Light Material Bucket with BOC
Bucket fill factor
(8.0 cu.yd) Loose Material Bucket with BOC
6.1 (Loading of crushed stone and dry sand)
(8.0)
Bucket capacity: m3 (cu.yd)
WA500-6
Bucket fill factor 5.1 m3 General Purpose Bucket with BOC
5.6 (6.7 cu.yd)
(7.3)
5.3 115 100 95% 5.3 m3 Excavating Bucket with Teeth
(6.9) (6.9 cu.yd)
Bucket capacity: m3 (cu.yd)
5.2
(6.8) 5.2 m3 Excavating Bucket with BOC
5.0 (6.8 cu.yd) Excavating Bucket with Teeth and
(6.5) Segments
4.7
(6.1) 5.0 m3 Excavating Bucket with Teeth
Hight it boom (6.5 cu.yd) Rock Bucket with Teeth and Segments
4.5 (Spade Nose)
(5.9)
4.3
4.7 m3 Rock Bucket with Teeth
(5.6) (6.1 cu.yd) (Spade Nose)
1000 1200 1400 1600 1800 2000 2200 kg/m3
2000 2500 3000 3500 lb/yd3
Material density FVBH0395
WA500-3
cu.yd m3 Capacity
9
7 Heaped Struck
m3
(cu.yd)
Bucket capacity
6
I Excavating bucket (straight edge) 4.3 3.6
7 with teeth (5.6) (4.7)
6.5 5
II Excavating bucket (spade nose) with 4.5 4.1
4.5
5.6 4.3 teeth and segment edge (5.9) (5.4)
III General-purpose bucket with bolt on 5.0 4.6
cutting edge without teeth ; Loading
(6.5) (6.0)
4 3 stockpile products
1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
3A-129
Bucket Selection WHEEL LOADERS
WA500-3 (High-lift)
cu.yd m3 Capacity
9 7 Heaped Struck
m3
8 (cu.yd)
Bucket capcity
6
I Excavating bucket (straight edge) 4.2 3.6
7 with teeth (5.6) (4.8)
5
6
4
5
4 3
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA600-6
3990mm 13.1' Boom Bucket fill factor 7.0 m3 Stockpile Bucket with Teeth and weld on
Bucket capacity: m3 (cu.yd)
WA600-3
cu.yd m3 Capacity
10
Heaped Struck
9 m3
Bucket capacity
(cu.yd)
10
8
I Excavating bucket (straight edge) 6.1 5.1
with tip teeth (8.0) (6.7)
8
II Excavating bucket (spade nose) with 6.1 5.1
6
tip teeth (8.0) (6.7)
11.0 9.5
III Coal bucket (straight edge)
4
4
(14.4) (12.4)
1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA600-3 (High-lift)
cu.yd m3 Capacity
10 Heaped Struck
12 m3
(cu.yd)
Bucket capcity
6
4
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
3A-130
Bucket Selection WHEEL LOADERS
WA700-3
cu.yd m3 Capacity
10 Heaped Struck
m3
(cu.yd)
Bucket capacity
12
10
I Excavating bucket (straight edge) 8.7 7.6
without tip teeth (11.4) (9.9)
10
II Excavating bucket (spade nose) 8.7 7.6
8
without tip teeth (11.4) (9.9)
III General-purpose bucket (straight 9.4 8.2
8
6
edge) without tip teeth (12.3) (10.7)
1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA700-3 (High-lift)
cu.yd m3 Capacity
12 Heaped Struck
m3
14 (cu.yd)
Bucket capcity
8 6
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
WA800-3
Capacity
Heaped Struck
m3
(cu.yd)
I Excavating bucket (spade nose) with 11.0 9.3
tip teeth (14.4) (12.2)
II Stockpile (spade nose) with teeth 12.3 10.4
(16.1) (13.6)
WA800-3 (High-lift)
cu.yd m3 Capacity
18 14
Heaped Struck
m3
(cu.yd)
Bucket capcity
8
1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
kg/m3 x 1000
3A-131
Bucket Selection WHEEL LOADERS
WA900-3
Capacity
Heaped Struck
m3
(cu.yd)
I Excavating bucket (spade nose) with 13.0 11.0
tip teeth (17.0) (14.4)
WA900-3 (High-lift)
cu.yd m3 Capacity
18 14
Heaped Struck
m3
(cu.yd)
Bucket capcity
8
1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
kg/m3 x 1000
WA1200-3
Capacity
115 100 95% Heaped Struck
35.0
m3
(45.5) (cu.yd)
30.0 I Excavating bucket (spade nose) with 20.0 17.2
(39.0) tip teeth (26.2) (22.5)
Bucket capacity: m3 (cu.yd)
20.0
(26.0)
18.0
(23.4)
16.5
(21.5)
14.0
(18.2)
500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 kg/m3
1000 1500 2000 2500 3000 3500 4000 4500 5000 lb/cu.yd
FVBH0250
WA1200-3 (High-lift)
Bucket fill factor Capacity
35.0 Heaped Struck
(45.8) m3
Bucket capacity: m3 (cu.yd)
3A-132
Bucket Selection WHEEL LOADERS
1.9
1.9 m3 Excavating Bucket
(2.5) (2.5 cu.yd) (Loading and excavating of crushed or
blasted rock)
1000 1200 1400 1600 1800 2000 2200 kg/m3
2000 2500 3000 3500 lb/yd3
Material density FVBH0327
3A-133
Bucket Selection WHEEL LOADERS
3A-134
Bucket Selection WHEEL LOADERS
6
5.5 I Excavating bucket (straight edge) with 5.5 4.5
7
6.5 5.0
teeth (7.2) (5.9)
II Excavating bucket (straight edge) with 4.5 3.9
5.9 4.5 teeth & segment edge (5.9) (5.1)
5.6
III General-purpose bucket (straight 5.0 4.6
edge) with bolt on cutting edge (6.5) (6.0)
4 3
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
kg/m3 x 1000
1.5 2.0 2.5 3.0 3.5 4.0
lb/cu.yd x 1000
Material density
Bucket
Bucket type Capacity (m3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1
Material density t/m3
Bucket
Bucket type Capacty (m3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1
Material density t/m3
3A-135
Bucket Selection WHEEL LOADERS
4.5
Bucket fill factor
e.g. for industrial use such as loading lightweight recycling
(5.9) materials or wood chips or shavings
4.0
(5.2) Stock pile bucket
Loading loosened or broken material
3.6
(4.7)
Universal/Earth-moving bucket
3.4 Ideal for road-building or earthworks, or load & carry uses
(4.4)
1.000 1.200 1.400 1.600 1.800 2.000 2.200 kg/m³
Heavy-Duty bucket
2000 2500 3000 3500 lb/yd³ Loading and loosening of particulary abrasive materials
Material density
3A-136
Teeth Selection WHEEL LOADERS
1) KMAX and XS
TEETH SELECTION for LOADERS
3A-137
Teeth Selection WHEEL LOADERS
– XS04 WA30-WA75 –
DEFINITIONS
Standard / Heavy Duty - The load on the machine ranges from very little to moderate with some limited, “high load” use.
Materials range from light and loose, well-shot, fracturable, to some medium, even heavy shot materials that break up into
manageable sizes when excavated. Large slabs of rock do not fit in this category.
Extreme Service - The load on the machine is high, nearing the maximum capabilities of the machine. Materials are heavy un-
shot rock or slabs that require the full force of the machine to break out.
3A-138
Teeth Selection WHEEL LOADERS
Tooth Styles
Series
1 2 3 4 5 6 7 8 9 10
XS04 – – – – – – – –
XS05 – – – – –
XS10 – – – – –
KMAX 15 – – –
KMAX 20 – –
KMAX 25 – –
KMAX 30 – – –
KMAX 40 – –
KMAX 50 – – – –
KMAX 70 – – –
KMAX 85 – – – –
XS115 – – – – – – – –
XS145 – – – – – –
: Available
– : Not Available
3A-139
Fork Equipment WHEEL LOADERS
Features
• Log grapple
This is a special log attachment for use with logs ranging from small-diameter short
logs to large-diameter long logs. Its shape enables it to grip the log well with little
rolling shock, and it is designed so that the center of gravity of the log is close to the
machine body. This enables the machine to maintain its stability when loading and
hauling.
• Log-lumber grapple
The log-lumber grapple is an all-round tool for log and lumber handling capable of
dealing with lumber, long logs of large diameter or short logs of small diameter as
well as lumber. However, forks of log-lumber grapple are fixed for strength so it is
not suitable for use in forklift operations.
• Log-lumber fork
Log-lumber fork has the same features as log-lumber grapple.
This attachment has no top clamps.
• Lumber grapple
The "L" type forks of the lumber fork permit handling of lumber and logs of
smaller diameter and shorter length. Clearance between left and right forks
is adjustable according to the materials being handled.
• Lumber fork
Lumber fork has the same features as lumber grapple.
This attachment has no top clamps.
• Dumping fork
Useful for truck-loading pulpwood from stacks, and for gathering and loading
pulpwood into stacks or onto trucks. Also usable in handling logs of smaller
diameter and shorter length. A lighter, handy version of log handling
attachments. It has no top clamp. It can load logs when tilted back to prevent
them rolling over the fork.
• Pipe grapple
This is a log grapple with cushioning material to allow it to handle pipes and similar
materials.
* : Cushioning material
3A-140
Fork Equipment WHEEL LOADERS
Features
• Rolling gusset
If a rolling gusset is installed to the log lumber fork or log lumber grapple, the rolling
shock can be reduced when loading logs.
• Extension fork
If an extension fork is installed to the lumber fork, the efficiency of handling light
materials such as small diameter short logs can be improved.
• Multi-coupler
This is an attachment replacement device that makes it possible to speed up the
replacement of attachments and reduce the burden on the operator.
It is possible to remove and install attachments to match the purpose of the work
simply when sitting in the operator's seat, thereby greatly reducing time and labor.
3A-141
Log-Loader Operations WHEEL LOADERS
A. Scooping
1. Forward the machine to insert forks under piled logs while
watching fork tips.
2. Once logs are scooped by forks and tilted back fully, then close
the arms.
3. Lift fork 30-50 cm above the ground to carry.
NOTE: Use both forks evenly to scoop and grapple the center of
logs.
B. Loading work
1. Raise booms and forward the machine gradually to the
destination while keeping the fork in a full backward tilt.
2. Open clamper arms and unload logs while slowly lowering forks.
After unloading logs, shift the fork control lever to the "tilt" position
and the fork will return automatically to its preset position.
After closing the arms and reversing the machine, lower the
booms.
NOTE: When dumping a full load of logs, lower engine revolutions
to achieve gradual dumping.
Avoid sudden braking or steering with a full load of logs.
When loading onto trucks, be careful forks and logs do not
hit the sticks mounted on the truck's body sides.
D. Other operations
Wrong Good
1. To push logs, open the clamp arms and push them with the inside
of the fork, forming right angles with the logs.
NOTE: The dumping angle should be within 20°.
Avoid pushing logs with the front of the closed clamp arms.
2. To retract logs, lower fork and raise fork tips 50-100 cm above the
ground, then reverse the machine and retract the logs.
NOTE: Do not uproot tree roots with forks.
Dangerous operations, such as throwing grabbed logs for
placement in the depth of loading site, should be conducted
in open areas and only after the work site has been properly
cleared. Do not conduct these operations where damage to
the machine or other equipment is possible.
50~100cm
3A-142
Lumber Grapple WHEEL LOADERS
Specifications
Model
WA250-5** WA320-5**
Item
OPERATING WEIGHT kg (lb) 11330 (24,980) 14270 (31,470)
A. OVERALL LENGTH mm (ft.in) 7625 (25'0") 8040 (26'5")
B. OVERALL WIDTH mm (ft.in) 2470 (8'1") 2585 (8'6")
C. Max. tine height with tine mm (ft.in) 3645 (12'0") 3765 (12'4")
level
D. Reach, max. tine height mm (ft.in) 2085 (6'10") 2155 (7'1")
with tine level
E. Dumping clearance* mm (ft.in) 2795 (9'2") 2860 (9'5")
F. Dumping reach* mm (ft.in) 1780 (5'10") 1840 (6'0")
G. Overall tine width mm (ft.in) 2045 (6'9") 2165 (7'1")
H. Tine length mm (ft.in) 1220 (4'0") 1320 (4'4")
I. Max. clamp opening mm (ft.in) 2360 (7'9") 2470 (8'1")
height
J. Top clamp min. closure mm (ft.in) 950 (3'1") 1000 (3'3")
diameter
TIRE SIZE 20.5-25-12PR (L2) 20.5-25-16PR (L3)
Add. counterweight kg (lb) 300 (660) 520 (1,150)
* At 30° discharge angle
** With ROPS cab
3A-143
Dumping Fork WHEEL LOADERS
Specifications
3A-144
Lumber Fork WHEEL LOADERS
Specifications
3A-145
Log Grapple WHEEL LOADERS
Specifications
Model WA320-3***
WA320-5** WA380-3** WA380-5**
Item CUSTOM
OPERATING WEIGHT kg (lb) 13970 (30,800) 13680 (30,160) 16980 (37,430) 16790 (37,020)
A. OVERALL LENGTH mm (ft.in) 7720 (25'4") 7845 (25'9") 8455 (27'9") 8627 (28'4")
B. OVERALL WIDTH mm (ft.in) 2585 (8'6") 2585 (8'6") 2695 (8'10") 2695 (8'10")
C. Max. tine height with tine mm (ft.in) 3875 (12'9") 3855 (12'8") 3985 (13'1") 3985 (13'1")
level
D. Reach, max. tine height mm (ft.in) 1855 (6'1") 1880 (6'2") 2080 (6'10") 2080 (6'10")
with tine level
E. Dumping clearance* mm (ft.in) 3095 (10'2") 3075 (10'1") 3140 (10'4") 3140 (10'4")
F. Dumping reach* mm (ft.in) 1635 (5'4") 1660 (5'5") 1835 (6') 1835 (6')
G. Overall tine width mm (ft.in) 2200 (7'3") 2200 (7'3") 2300 (7'7") 2300 (7'7")
H. Tine length mm (ft.in) 1320 (4'4") 1320 (4'4") 1420 (4'8") 1420 (4'8")
I. Max. clamp opening height mm (ft.in) 2280 ( 7'6") 2280 (7'6") 2415 (7'11") 2415 (7'11")
J. Top clamp min. closure mm (ft.in) 850 (2'9") 850 (2'9") 900 (2'11") 900 (2'11")
diameter
20.5-25-16PR
TIRE SIZE 20.5-25-12PR 20.5-25-16PR 20.5-25-20PR
(L3)
Add. counterweight kg (lb) 520 (1,150) 750 (1,650) 750 (1,650) 705 (1,550)
* At 30° discharge angle
** With ROPS cab
*** With steel cab
Model
WA420-3** WA450-3LL WA470-5** WA470-3***
Item
OPERATING WEIGHT kg (lb) 19900 (43,870) 23440 (51,680) 22550 (49,710) 22790 (50,240)
A. OVERALL LENGTH mm (ft.in) 8875 (29'1") 9265 (30'5") 9425 (31'0") 9315 (30'7")
B. OVERALL WIDTH mm (ft.in) 2820 (9'3") 3000 (9'10") 2920 (9'7") 2920 (9'7")
C. Max. tine height with tine mm (ft.in) 4150 (13'7") 4300 (14'1") 4230 (13'11") 4230 (13'11")
level
D. Reach, max. tine height mm (ft.in) 2070 ( 6'9") 2190 (7'1") 2315 (7'7") 2265 (7'5")
with tine level
E. Dumping clearance* mm (ft.in) 3275 (10'9") 3380 (11'1") 3315 (10'11") 3315 (10'11")
F. Dumping reach* mm (ft.in) 1785 (5'10") 1915 (6'3") 2045 (6'9") 1995 (6'7")
G. Overall tine width mm (ft.in) 2525 (8'3") 2685 (8'10") 2645 (8'8") 2645 (8'8")
H. Tine length mm (ft.in) 1420 (4'8") 1525 (5') 1525 (5') 1525 (5')
I. Max. clamp opening height mm (ft.in) 2525 (8'3") 2830 (9'3") 2765 (9'1") 2765 (9'1")
J. Top clamp min. closure mm (ft.in) 900 (2'11") 1000 (3'3") 1000 (3'3") 1000 (3'3")
diameter
TIRE SIZE 23.5-25-16PR 26.5-25-24PR 23.5-25-24PR 23.5-25-20PR
Add. counterweight kg (lb) 1045 (2,300) 1045 (2,300) 1030 (2,270) 1045 (2,300)
* At 30° discharge angle
** With ROPS cab
*** Rear tires are filled with calcium chloride, with steel cab & ROPS canopy
3A-146
Log Grapple WHEEL LOADERS
Specifications
Model
WA500-3***
Item
OPERATING WEIGHT kg (lb) 33090 (72,950)
A. OVERALL LENGTH mm (ft.in) 10105 (33'2")
B. OVERALL WIDTH mm (ft.in) 3190 (10'6")
C. Max. tine height with tine mm (ft.in) 4375 (14'4")
level
D. Reach, max. tine height mm (ft.in) 2590 (8'6")
with tine level
E. Dumping clearance* mm (ft.in) 3300 (10'10")
F. Dumping reach* mm (ft.in) 2250 (7'5")
G. Overall tine width mm (ft.in) 2745 (9')
H. Tine length mm (ft.in) 1830 (6')
I. Max. clamp opening height mm (ft.in) 3035 (9'11")
J. Top clamp min. closure mm (ft.in) 1150 (3'9")
diameter
TIRE SIZE 29.5-25-22PR
Add. counterweight kg (lb) 2250 (4,960)
* At 30° discharge angle
** With ROPS cab
*** Rear tires are filled with calcium chloride, with steel cab & ROPS canopy
3A-147
Logger Performance WHEEL LOADERS
(Lumber Grapple)
WA250-5
Curves based on machine equipped with 20.5-25-12PR (L2) TL and counterweight
mm
in
4000
150
140
130 LIFTING CAPACITY
(TINES LEVEL)
120 3000
LIFTING CAPACITY
110 (TINES ROLLED BACK)
HINGE PIN HEIGHT
100
90
80 2000
70
60
STATIC TIPPING
LOAD
50 [MACHINE FULL TURN]
(TINES LEVEL)
40 1000
30
STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 Kg
0 10000 20000 lb
STATIC TIPPING LOAD(STRAIGHT)AND
LIFTING CAPACITY FVBH0342
WA320-5
Curves based on machine equipped with 20.5-25-16PR (L3) TL and counterweight
mm
in
5000
190 STATIC TIPPING
180 LOAD
[MACHINE FULL TURN]
170 (TINES LEVEL)
160 4000
150
140 LIFTING CAPACITY
130 (TINES LEVEL)
HINGE PIN HEIGHT
120 3000
110
100
90 LIFTING CAPACITY
(TINES ROLLED BACK)
80 2000
70
60
50
40 1000
30 STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 14000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD(STRAIGHT)AND
LIFTING CAPACITY FVBH0343
3A-148
Logger Performance WHEEL LOADERS
(Lumber Fork)
WA200-5 WA250-5
Curves based on machine equipped with 17.00-25- Curves based on machine equipped with 20.5-25-
12PR (L2) TL and counterweight 12PR (L2) TL and counterweight
mm
mm
in
in
4000 4000
150 150
LIFTING CAPACITY
140 (TINES ROLLED BACK) 140
130 130 LIFTING CAPACITY
(TINES LEVEL)
120 3000 120 3000
LIFTING CAPACITY LIFTING CAPACITY
110 (TINES LEVEL) 110 (TINES ROLLED BACK)
HINGE PIN HEIGHT
0 0 0 0
2000 4000 6000 8000 Kg 2000 4000 6000 8000 10000 12000 Kg
0 4000 8000 12000 14000 lb 0 10000 20000 lb
STATIC TIPPING LOAD(STRAIGHT)AND STATIC TIPPING LOAD(STRAIGHT)AND
LIFTING CAPACITY FVBH0344 LIFTING CAPACITY FVBH0345
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
5000
190 STATIC TIPPING
180 LOAD
[MACHINE FULL TURN]
170 (TINES LEVEL)
160 4000
150
140 LIFTING CAPACITY
130 (TINES LEVEL)
HINGE PIN HEIGHT
120 3000
110
100
90 LIFTING CAPACITY
(TINES ROLLED BACK)
80 2000
70
60
50
40 1000
30 STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 14000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD(STRAIGHT)AND
LIFTING CAPACITY FVBH0346
3A-149
Logger Performance WHEEL LOADERS
(Lumber Fork)
WA380-3 WA380-5
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with 20.5-25-
16PR (L3) TL and counterweight for logger 20PR (L3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000
150
140
130
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
3A-150
Logger Performance WHEEL LOADERS
(Dumping Fork)
WA250-5
Curves based on machine equipped with 20.5-25-
12PR (L2) TL and counterweight
mm
in
4000
150
140
130 LIFTING CAPACITY
(TINES LEVEL)
120 3000
LIFTING CAPACITY
110 (TINES ROLLED BACK)
HINGE PIN HEIGHT
100
90
80 2000
70
60
STATIC TIPPING
LOAD
50 [MACHINE FULL TURN]
(TINES LEVEL)
40 1000
30
STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 Kg
0 10000 20000 lb
FVBH0347
5000
190 STATIC TIPPING
180 LOAD
[MACHINE FULL TURN]
170 (TINES LEVEL)
160 4000
150
140 LIFTING CAPACITY
130 (TINES LEVEL)
HINGE PIN HEIGHT
120 3000
110
100
90 LIFTING CAPACITY
(TINES ROLLED BACK)
80 2000
70
60
50
40 1000
30 STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 14000 Kg
10000 20000 30000 lb
FVBH0348
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
3A-151
Logger Performance WHEEL LOADERS
(Dumping Fork)
WA380-3 WA380-5
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with 20.5-25-
16PR (L3) TL and counterweight for logger 20PR (L3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000
150
140
LIFTING CAPACITY
130 (TINES LEVEL)
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
3A-152
Logger Performance WHEEL LOADERS
(Log Grapple)
WA320-5 WA320-3 CUSTOM
Curves based on machine equipped with 20.5-25- Curves based on machine equipped with
16PR (L3) TL and counterweight 20.5-25-12PR (L3) TL and counterweight for logger
mm
in
5000
190 STATIC TIPPING
180 LOAD
[MACHINE FULL TURN]
170 (TINES LEVEL)
160 4000
150
140 LIFTING CAPACITY
130 (TINES LEVEL)
HINGE PIN HEIGHT
120 3000
110
100
90 LIFTING CAPACITY
(TINES ROLLED BACK)
80 2000
70
60
50
40 1000
30 STATIC TIPPING
20 LOAD
[MACHINE STRAIGHT]
10 (TINES LEVEL)
0 0
2000 4000 6000 8000 10000 12000 14000 Kg
10000 20000 30000 lb
FVBH0349
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
WA380-3 WA380-5
Curves based on machine equipped with Curves based on machine equipped with 20.5-25-
20.5-25-16PR (L3) TL and counterweight for logger 20PR (L3) TL and counterweight for logger
mm
in
5000
190
180
170
160 4000 LIFTING CAPACITY
(TINES LEVEL)
150
140
130
HINGE PIN HEIGHT
STATIC TIPPING
120 3000 LOAD
[MACHINE
110 FULL TURN]
(TINES LEVEL)
100
90 LIFTING CAPACITY
80 2000 (TINES ROLLED
BACK)
70
STATIC TIPPING
60 LOAD
[MACHINE
50 STRAIGHT]
40 1000 (TINES LEVEL)
30
20
10
0 0
4000 6000 8000 10000 12000 14000 16000 Kg
10000 20000 30000 lb
STATIC TIPPING LOAD (STRAIGHT) AND
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
3A-153
Logger Performance WHEEL LOADERS
(Log Grapple)
WA420-3 WA450-3LL
Curves based on machine equipped with 23.5-25- Curves based on machine equipped with 26.5-25-
16PR (L3) TL and counterweight for logger 24PR (L3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
WA470-3 WA500-3
Curves based on machine equipped with 23.5-25- Curves based on machine equipped with
20PR (L3) TL and counterweight for logger 29.5-25-22PR (L3) TL and counterweight for logger
STATIC TIPPING LOAD (STRAIGHT) AND STATIC TIPPING LOAD (STRAIGHT) AND
LIFTING CAPACITY LIFTING CAPACITY
3A-154
High Lift Boom WHEEL LOADERS
Specifications
3A-155
Tire Availability WHEEL LOADERS
• : Standard tire
T/L : Tubeless tire
W/T : Tubed tire
SB : Steel breaker tire
SSB : Side steel breaker tire
3A-156
Tire Availability WHEEL LOADERS
3A-157
Tire Availability WHEEL LOADERS
•17.5 R25 L-2 550/65 R25 550/65-R25 650/65 R 25 650/65 R25 750/65 R25
•17.5 R25 L-4 17.5 R25 L2-L5 600/65-R25 20.5R 25 L3
•17.5 R25 L-5 20.5 R25 L2-L5 20.5R 25 L4
20.5 R25 L5
• : Standard tire
T/L : Tubeless tire
W/T : Tubed tire
SB : Steel breaker tire
SSB : Side steel breaker tire
*** : Germany source
3A-158
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
WA420 - WA480
ft mm
5000
15 4500
2500
2000
5 1500
1000
500
0 0
0 1000 2000 3000 4000 5000 mm
0 5 10 15 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
◆ : Indicates dumping reach and clearance at the end of teeth or BOC.
● : Indicates the top corner of body.
WA500 - WA700
ft mm
5000
WA700 HL
15 4500
WA600 HL WA700
Dumping clearance / Loading height
4000
HD605
WA500 HL
HD465
3500
WA600
HD405
10 3000 HD325
WA500 HD255
2500
2000
5 1500
1000
500
0 0
0 1000 2000 3000 4000 5000 mm
0 5 10 15 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
◆ : Indicates dumping reach and clearance at the end of teeth or BOC.
● : Indicates the top corner of body.
3A-159
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
WA800 - WA1200
ft mm
10000
30 9000
8000
Dumping clearance / Loading height
WA1200 HL 930E
7000
830E
WA1200
20 6000 630E
730E
WA800 HL
WA900 HL HD1500
5000
WA800 WA900 HD985
4000 HD785
10 3000
2000
1000
0 0
0 2000 4000 6000 8000 10000 mm
0 10 20 30 ft
Dumping reach / Body width
Chart shows dumping reach and dumping clearance of standard size buckets.
HL means high lift boom.
◆ : Indicates dumping reach and clearance at the end of teeth or BOC.
● : Indicates the top corner of body.
3A-160
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
3A-161
Wheel Loader and WHEEL LOADERS
Dump Truck Combination
*1: Dumping clearance and loading height change depending (2) Dumping clearance (DC)
on tires. Small and medium sized loaders: DC ≥ H
Above combination is determined by following method; Large sized loaders: DC≥H+ (W/12)
(1) Suitable loading times (n): 3-5 times (3) Dumping reach (DR)
Max. payload of dump truck Small and medium sized loaders: DR ≥ (W/6) + 500 mm
n= Large sized loaders: DC≥W/3
Bucket capacity × Bucket fill factor × Specific weight
or (4) Body length (L)
Heaped capacity of dump truck The dump truck’s body length should be 1.3 to 1.7 times longer than
n= the width of the bucket.
Bucket capacity × Bucket fill factor
DR
L W
1/6W
DC
H
G.L
FVBH0298
3A-162
Production WHEEL LOADERS
Loading
Standard Production – Loading (m3/h)
Cycle Cycles Bucket Size** (cu.m)
Time Per
(min) Hr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5
0.35 171 White area indicates average production
0.40 150 150 225 300 375 450
0.45 133 133 200 266 332 400 466 530 600 665
0.50 120 120 180 240 300 360 420 480 540 600 660 720 780 840 900
0.55 109 109 164 218 272 328 382 436 480 545 600 655 705 785 820
0.60 100 100 180 200 250 300 350 400 450 500 550 600 650 700 750
0.65 92 92 138 184 230 278 322 368 416 460 505 555 600 645 690
0.70 86 300 342 386 430 471 515 555 600 645
0.75 80 440 480 520 560 600
3A-163
MEMO
SECTION 3B
WHEEL DOZERS
CONTENTS
Features .................................................................... 3B-2
Specifications ........................................................... 3B-3
Dimensions ............................................................... 3B-4
3B-1
Features WHEEL DOZERS
• Komatsu components throughout the machine assure years of reliability and high-performance service.
• Adjustment-free wet disc brakes for steady braking and extended service life.
• Electronic Display and Monitoring System for minimized maintenance.
• A large drawbar horsepower with fuel-efficient, powerful Komatsu diesel engine for high productivity and
maneuverability.
• Fingertip control with Electrically Controlled Transmission.
• A tiltable steering wheel and fully adjustable suspension seat.
3B-2
Specifications WHEEL DOZERS
Model
WD420-3 WD500-3 WD600-3 WD900-3
Item
OPERATING WEIGHT kg (lb) 20000 (44,100) 26900 (59,300) 42900 (94,577) 100000 (220,460)
HORSEPOWER kW (HP)/rpm 167 (224)/2200 235 (315)/2100 362 (485)/2000 637 (853)/2000
BLADE CAPACITY m3 (cu.yd) 3.1 (4.1) 5.1 (6.7) 8.0 (10.5) 26.0 (34.0)
PERFORMANCE:
Travel speed km/h (MPH)
Forward 1st 6.3 (3.9) 7.1 (4.4) 6.5 (4.0) 7.0 (4.3)
2nd 11.7 (7.3) 12.6 (7.8) 11.8 (7.3) 12.3 (7.6)
3rd 20.5 (12.7) 21.2 (13.2) 20.8 (12.9) 28.0 (17.4)
4th 32.8 (20.4) 34.8 (21.6) 36.2 (22.5) —
Reverse 1st 6.6 (4.1) 7.9 (4.9) 7.2 (4.5) 7.1 (4.4)
2nd 12.2 (7.6) 14.1 (8.8) 13.0 (8.1) 12.4 (7.7)
3rd 21.2 (13.2) 23.5 (14.6) 23.0 (14.3) 28.3 (17.6)
4th 33.9 (21.1) 38.1 (23.7) 40.0 (24.9) —
Turning radius mm (ft.in) 6670 (21'11") 7485 (24'7") 9200 (30'2")
(Outside corner of blade)
Max. rim pull kg (lb) 18100 (39,900) 26500 (58,420) 42800 (94,360) 100000 (220,460)
DIMENSIONS:
Overall length mm (ft.in) 7160 (23'6") 7930 (26") 9285 (30'6") 12035 (39'6")
Overall width (without blade) mm (ft.in) 2820 (9'3") 3190 (10'6") 3570 (11'9") 4460 (14'8")
Overall height mm (ft.in) 3370 (11'1") 3860 (12'8") 4245 (13'11") 5215 (17'1")
Wheelbase mm (ft.in) 3300 (10'11") 3600 (11'10") 4100 (13'5") 5450 (31')
Treads (front and rear) mm (ft.in) 2200 (7'3") 2400 (7'10") 2650 (8'8") 3350 (11')
Articulation angle degree 40 40 40 40
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SA6D108 S6D140E SAA6D170E-3 SA12V140
No. of cylinders- mm (in) 6-108 × 130 6-140 × 165 6-170 x 170 12-140 × 165
bore × stroke (4.3 × 5.1) (5.5 × 6.5) (6.69 x 6.69) (5.5 × 6.5)
Piston displacement ltr. (cu.in) 7.15 (436) 15.24 (930) 23.15 (1413) 30.5 (1861)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 340 (90) 465 (123) 670 (177) 1430 (378)
TIRE:
(front) 23.5-25-12PR 29.5-25-22PR 35/65-33-24PR 45/65-R45XLDD (L4)
(rear) 23.5-25-12PR 29.5-25-22PR 35/65-33-24PR 45/65-R45XLDD (L4)
3B-3
Dimensions WHEEL DOZERS
WD420-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 3.1 (4.1)
A Blade width mm (ft.in) 3745 (12'3")
B Max. lift above ground mm (ft.in) 1190 (3'11")
C Max. drop below ground mm (ft.in) 510 (1'8")
D Max. tilt adjustment mm (ft.in) 950 (3'1")
Max. pitch angle adjustment degree 21°
E Overall length mm (ft.in) 7160 (23'6")
F Front overhang mm (ft.in) 1760 (5'9")
Turning radius mm (ft.in) 6670 (21'11")
Operating weight (include ROPS) kg (lb) 20000 (44100)
WD500-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 5.1 (6.7)
A Blade width mm (ft.in) 4550 (14'11")
B Max. lift above ground mm (ft.in) 1255 (4'1")
C Max. drop below ground mm (ft.in) 440 (1'5")
D Max. tilt adjustment mm (ft.in) 1260 (4'2")
Max. pitch angle adjustment degree 9°
E Overall length mm (ft.in) 7930 (26)
F Front overhang mm (ft.in) 1860 (6'1")
Turning radius mm (ft.in) 7485 (24'7")
Operating weight (include ROPS) kg (lb) 26900 (59300)
WD600-3
Blade type Straight Blade
Blade capacity (SAE Rated) m3 (cu.yd) 8.0 (10.5)
A Blade width mm (ft.in) 5100 (16'9")
B Max. lift above ground mm (ft.in) 1500 (4'11")
C Max. drop below ground mm (ft.in) 450 (17.7")
D Max. tilt adjustment mm (ft.in) 1430 (4'8")
Max. pitch angle adjustment degree 23°
E Overall length mm (ft.in) 9285 (30'6")
F Front overhang mm (ft.in) 2205 (7'3")
Turning radius mm (ft.in)
Operating weight (include ROPS) kg (lb) 42900 (94,360)
3B-4
Dimensions WHEEL DOZERS
WD900-3
Blade type Semi-U blade Coal blade
Blade capacity (SAE Rated) m3 (cu.yd) 26.0 (34.0) 45.0 (58.9)
A Blade width mm (ft.in) 6470 (21'3") 7400 (24'3")
B Max. lift above ground mm (ft.in) 1580 (5'2") 1560 (5'1")
C Max. drop below ground mm (ft.in) 680 (2'3") 680 (3'3")
D Max. tilt adjustment mm (ft.in) 1330 (4'4") 1710 (5'7")
Max. pitch angle adjustment degree 8° 8°
E Overall length mm (ft.in) 12035 (39’6")
F Front overhang mm (ft.in) 3385 (11'1")
Turning radius mm (ft.in) 11285 (37')
Operating weight (include ROPS) kg (lb) 100000 (220460)
3B-5
MEMO
SECTION 3C
TOWING TRACTORS
(FOR AIRPLANE)
CONTENTS
Features .................................................................... 3C-2
Specifications ........................................................... 3C-3
Dimensions ............................................................... 3C-4
3C-1
Features TOWING TRACTORS
3C-2
Specifications TOWING TRACTORS
Model
WT250E-1 WT500E-1
Item
WEIGHT: kg (lb)
Operating weight 25000 (55,130) 50000 (110,250)
Distribution (front) 12500 (27,560) 25000 (55,130)
(rear) 12500 (27,560) 25000 (55,130)
HORSEPOWER kW (HP)/rpm 162 (217)/2400 227 (304)/2200
PERFORMANCE:
Maximum drawbar pull kg (lb) 20000 (44,100) 38000 (83,770)
Travel speeds: km/h (MPH)
Forward 1st 7.0 (4.3) 3.6 (2.2)
2nd 12.5 (7.8) 9.0 (5.6)
3rd 22.3 (13.9) 20.0 (12.4)
4th 33.8 (21.0) 30.0 (18.6)
Reverse 1st 7.4 (4.6) 3.6 (2.2)
2nd 13.2 (8.2) 9.0 (5.6)
3rd 23.5 (14.6) 20.0 (18.6)
4th 35.3 (21.9) —
Turning radius (4ws) mm (ft.in) 6600 (21'8") 6500 (21'4")
(2ws) 10000 (32'10") 10000 (32'10")
DIMENSIONS:
Overall length mm (ft.in) 7670 (25'2") 8345 (27'5")
Overall width mm (ft.in) 2900 ( 9'6") 2930 ( 9'7")
Overall height* mm (ft.in) 2945 ( 9'8") 2950 ( 9'8")
Wheelbase mm (ft.in) 3300 (10'10") 3500 (11'6")
Treads (front and rear) mm (ft.in) 2250 ( 7'5") 2440 (8')
Minimum ground clearance mm (in) 250 ( 9.8") 210 ( 8.3")
ENGINE: KOMATSU KOMATSU
Model SA6D108 S6D125
No. of cylinders- mm (in) 6-108 × 130 6-125 × 150
bore × stroke (4.25 × 5.12) (4.92 × 5.90)
Piston displacement ltr. (cu.in) 7.15 (436) 11.04 (673)
TIRES:
Front tire 14.00-25-20PR 16.00-25-32PR
Rear tire 14.00-25-20PR 16.00-25-32PR
CAPACITY:Fuel tank ltr. (U.S. Gal) 300 (79.3) 300 (79.3)
* To top of yellow warning lamp
3C-3
Dimensions TOWING TRACTORS
WT250E-1
Unit: mm (ft.in)
WT500E-1
Unit: mm (ft.in)
3C-4
CONTENTS
INDEX
SECTION 4
RIGID DUMP TRUCKS Sec 4A
ARTICULATED DUMP TRUCKS Sec 4B
CRAWLER CARRIERS Sec 4C
SLAG DUMP TRUCKS Sec 4D
SECTION 4A
RIGID
DUMP TRUCKS
CONTENTS
Features .................................................................... 4A-2
Specifications ........................................................... 4A-5
Dimensions ............................................................... 4A-9
Use of Performance Curve .................................... 4A-12
Performance Curve:
HD255-5 .............................................................. 4A-13
HD325-7 .............................................................. 4A-15
HD325-6 .............................................................. 4A-17
HD405-7 .............................................................. 4A-19
HD405-6 .............................................................. 4A-21
HD465-7E0 .......................................................... 4A-23
HD465-7 .............................................................. 4A-25
HD605-7E0 .......................................................... 4A-27
HD605-7 .............................................................. 4A-29
HD785-5 .............................................................. 4A-31
HD785-5* ............................................................. 4A-33
HD985-5 .............................................................. 4A-34
HD1500-5 ............................................................ 4A-36
730E .................................................................... 4A-37
830E .................................................................... 4A-38
830E-AC .............................................................. 4A-39
930E-3 ................................................................. 4A-40
Attachments and Options ..................................... 4A-41
Tire Selection .......................................................... 4A-45
Body selection ....................................................... 4A-53
Production .............................................................. 4A-63
4A-1
Features RIGID
DUMP TRUCKS
Ecology Features
ecot3 (EPA Tier 3, EU stage 3A certified
engine)
Komatsu develops and produces all major
components, such as engines, electronics and
hydraulic components in house.
With this “Komatsu Technology”, and adding
customer feedback, Komatsu is achieving great
advancements in technology.
To achieve high levels of productivity and ecology,
Komatsu developed the main components with an
advanced control system.
The result is a new generation of high performance
and environment friendly machines.
4A-2
Features RIGID
DUMP TRUCKS
High productivity
The result of total performance: High performance,
minimum downtime, and easy operation
Dependable and high-performance
components
• Komatsu diesel engine delivers high-output and
direct injection system provides high fuel
efficiency
• Full-automatic TORQFLOW transmission:
A microcomputer built into the shift controller
automatically selects the optimum gear position
according to travel speed, load and road
conditions assuring effort-free operation.
• High-performance, durable brakes: Sealed, oil-
cooled, multiple-disc brakes on rear wheels are
designed for extended operation. The large-
capacity rear wheel brakes also act as retarders
as a precaution against engine overrunning when
descending steep inclines.
• High maneuverability: The MacPherson strut type
front suspension system has a special A-frame
between each wheel and the main frame. The
wider space created between the front wheels
and the main frame increases the turning angle of
the wheels. The larger this turning angle, the
smaller the turning radius of the truck.
• Extra sturdiness: Box-section, ladder type frame
construction of high-tensile-strength steel plate
and cast steel offer unfaltering durability for long
service.
4A-3
Features RIGID
DUMP TRUCKS
Automatic Retard Speed Control
(ARSC)
ARSC allows the operator to simply set the downhill
travel speed and go down slopes at a constant
speed. As a result, the operator can concentrate on
steering. The speed can be set at increments of 1
km/h 0.6 MPH per click (±5 km/h 3.1 MPH of
maximum speed adjustment) to match the optimum
speed for the slope. Also, since the retarder cooling
oil temperature is always monitored, the speed is
automatically lowered.
(HD325/405-7, HD465/605-7)
(Option for HD255-5, HD785-5 and HD985-5)
Internet
Personal
computer terminal
WebCARE Server (for downloading
data)
Komatsu
distributors
Merits of Using VHMS
Diagnosis
• Machine health information that used to take approximately 1 hour to be measured can now be
downloaded by personal computer in approximately 10 minutes, shortening the vehicle's down time.
• Furthermore, if the satellite communications function is equipped, the machine information can be
gathered without stopping the vehicle at all. (Not available in some regions.)
Recommendation
• An appropriate recommendation can be made by viewing these data over the Internet.
• Proper driving methods
• Formulation of maintenance plans in advance that suit the customer's production schedule.
Customer's Benefit
• Sudden break down can be prevented through utilization of data trend (change over time).
• Ascertaining the facts and searching for the cause of the breakdown are simplified, thus enabling
problems to be resolved quickly.
• Down time can be shortened by the systematic use of Reman components.
• Machine life can be extended significantly by proper operation and proper maintenance.
4A-4
Specifications RIGID
DUMP TRUCKS
1. Japan source
Model q
HD255-5 HD325-7 HD325-6
Item
WEIGHT: kg (lb)
Empty vehicle weight* 22450 (49,490) 31600 (69,700) 28700 (63,270)
Distribution (front) 10775 (23,750) 16337 (36,020) 13780 (30,380)
(rear) 11675 (25,740) 15263 (33,650) 14920 (32,890)
Gross vehicle weight 47525 (104,770) 63680 (140,390) 60780 (134,000)
Distribution (front) 15210 (33,530) 21014 (46,330) 19450 (42,880)
(rear) 32315 (71,240) 42666 (94,060) 41330 (92,120)
Max. gross vehicle weight** — 69280 (152,740) 65200 (143,740)
Gross horsepower kW (HP)/RPM 241 (323)/2100 386 (518)/2000 379 (508)/2000
Net horsepower kW (HP)/RPM 235 (316)/2100 371 (498)/2000 364 (488)/2000
HAULING CAPACITY:
Maximum load m. ton (U.S. ton) 25 (27.6) 36.5 (40) 36.5 (40)
Heaped capacity (2:1) m3 (yd3) 17.7 (23.2) 24.0 (31.4) 24.0 (31.4)
PERFORMANCE:
Maximum speed km/h (MPH) 47.0 (29.2) 70 (43.5) 70 (43.5)
Turning radius m (ft.in) 7.0 (23') 7.2 (23'7") 7.2 (23'7")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D125E SAA6D140E-5 SAA6D140E
No. of cylinders- 6 6 6
bore × stroke mm (in) 125 × 150 140 × 165 140 × 165
(4.92 × 5.91) (5.51 × 6.50) (5.51 × 6.50)
Displacement ltr. (in3) 11.04 (674) 15.24 (930) 15.23 (930)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 16.00-25-28PR × 2 18.00-33-32PR × 2 18.00-33-28PR × 2
Rear tire 16.00-25-28PR × 4 18.00-33-32PR × 4 18.00-33-28PR × 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 374 (98.8) 484 (127.9) 500 (132.0)
4A-5
Specifications RIGID
DUMP TRUCKS
Model q
HD465-7 HD605-7E0 HD605-7
Item
WEIGHT: kg (lb)
Empty vehicle weight* 42800 (94,360) 46200 (101,850) 45900 (101,190)
Distribution (front) 20120 (44,360) 21714 (47,870) 21575 (47,560)
(rear) 22680 (50,000) 24486 (53,980) 24325 (53,630)
Gross vehicle weight 97875 (215,780) 110180 (242,900) 108975 (240,250)
Distribution (front) 31320 (69,050) 35258 (77,730) 34870 (76,870)
(rear) 66555 (146,730) 74922 (165,170) 74105 (163,370)
Max. gross vehicle weight** 98800 (217,810) — 109900 (242,290)
Gross horsepower kW (HP)/RPM 551 (739)/2000 551 (739)/2000 551 (739)/2000
Net horsepower kW (HP)/RPM 533 (715)/2000 533 (713)/2000 533 (715)/2000
HAULING CAPACITY:
Maximum load m. ton (US ton) 55 (61) 63 (69.4) 63 (69)
Heaped capacity (2:1) m3 (yd3) 34.2 (44.7) 40.0 (52.3) 40 (52.3)
PERFORMANCE:
Maximum speed km/h(MPH) 70 (43.5) 70 (43.5) 70 (43.5)
Turning radius m (ft.in) 8.5 (27'11") 8.5 (27'11") 8.5 (27'11")
KOMATSU
ENGINE: KOMATSU KOMATSU
SAA6D170E
Model SAA6D170E SAA6D170E-5
6
No. of cylinders- 6 6
170 × 170
bore × stroke mm (in) 170 × 170 170 × 170
(6.69 × 6.69)
(6.69 × 6.69) (6.69 × 6.69)
23.15 (1413)
Displacement ltr. (in3) 23.15 (1.413) 23.15 (1413)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 24.00-35-36PR × 2 24.00-R35 × 2 24.00R35 × 2
Rear tire 24.00-35-36PR × 4 24.00-R35 × 4 24.00R35 × 4
CAPACITY: Fuel tank ltr.(U.S. Gal) 780 (206.1) 780 (206.1) 780 (206.1)
Model
HD785-5 HD985-5
Item
WEIGHT: kg (lb)
Empty vehicle weight* 66930 (147,550) 73700 (162,480)
Distribution (front) 31460 (69,360) 34640 (76,370)
(rear) 35470 (78,200) 39060 (86,110)
Gross vehicle weight 158005 (348,340) 173780 (383,120)
Distribution (front) 52140 (114,950) 57345 (126,420)
(rear) 105865 (233,390) 116435 (256,690)
Max. gross vehicle weight** 166000 (366,000) 178780 (394,140)
Gross horsepower kW (HP)/RPM 783 (1050)/2000 783 (1050)/2100
Net horsepower kW (HP)/RPM 753 (1010)/2000 753 (1010)/2100
HAULING CAPACITY:
Maximum load m. ton (US ton) 91 (100) 105 (116)
Heaped capacity (2:1) m3 (yd3) 60 (78.5) 64 (83.7)
PERFORMANCE:
Maximum speed km/h(MPH) 65 (40.4) 70 (43.5)
Turning radius m (ft.in) 9.9 (32'6") 12.5 (41')
ENGINE: KOMATSU KOMATSU
Model SA12V140 SA12V140
No. of cylinders- 12 12
bore × stroke mm (in) 140 × 165 140 × 165
(5.51 × 6.50) (5.51 × 6.50)
Displacement ltr. (in3) 30.48 (1860) 30.48 (1860)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 27.00R49** × 2 30.00 R51** × 2
Rear tire 27.00R49** × 4 30.00 R51** × 4
CAPACITY: Fuel tank ltr.(U.S. Gal) 1250 (330.3) 1250 (330.3)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded .
*5 136 tons payload
q
Tier 3 and stage 3A model
4A-6
Specifications RIGID
DUMP TRUCKS
2. USA source
Model
HD785-5 HD1500-5 730E
Item
WEIGHT: kg (lb)
Empty vehicle weight* 70490(155,400) 102649 (226,300) 140592 (309,950)
Distribution (front) 33835(74,590) 50554 (111,450) 66840 (147,357)
(rear) 36655(80,810) 52095 (114,850) 73752 (162,593)
Gross vehicle weight 166468(367,000) 249478 (555,000) 324322 (715,000)
Distribution (front) 54935(121,110) 82328 (181,500) 107026 (235,950)
(rear) 111533(245,890) 167150 (368,500) 217296 (479,050)
Max. gross vehicle weight** — 249478 (555,000) 324322 (715,000)
Gross horsepower kW (HP)/RPM 807 (1082)/2000 1108 (1486)/1900 1492 (2000)/1900
Net horsepower kW (HP)/RPM 777 (1042)/2000 1048 (1406)/1900 1388 (1860)/1900
HAULING CAPACITY:
Maximum load m. ton (US ton) 90.72 (100) 149 (164) 186 (205)
Heaped capacity (2:1) m3 (yd3) 60.1(78.7) 78 (102) 111 (145)
PERFORMANCE:
km/h (MPH)
Maximum speed 64.7 (40.2) 58 (36.0) 55.7 (34.6)
m (ft.in)
Turning radius 9.9 (32'6") 12.2 (40') 14.0 (46')
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA12V140ZE-2 SDA12V160 SSA16V159
No. of cylinders- 12 12 16
bore × stroke mm (in) 140 × 165 159 × 190 159 × 159
(5.51 × 6.50) (6.26 × 7.48) (6.26 × 6.26)
Displacement ltr. (in3) 30.5 (1861) 45.0 (2746) 50.3 (3069)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 27.00 R49 × 2 33.00 R51 × 2 37.00 R57 × 2
Rear tire 27.00 R49 × 4 33.00 R51 × 4 37.00 R57 × 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 1250 (330) 2120 (560) 3217 (850.0)
Model
830E 830E-AC 930E-3***
Item
WEIGHT: kg (lb)
Empty vehicle weight* 162205 (357,359) 164200 (362,000) 211681 (466,672)
Distribution (front) 81823 (180,387) 81279 (179,190) 100215 (220,934)
(rear) 80682 (177,872) 82921 (182,810) 111466 (245,738)
Gross vehicle weight 385852 (850,650) 385848 (850,640) 501974 (1,106,652)
Distribution (front) 127331 (280,714) 127330 (280,710) 165651 (365,194)
(rear) 258521 (569,936) 258518 (569,930) 336323 (741,458)
Max. gross vehicle weight** 385852 (850,650) 385848 (850,640) 501974 (1,106,652)
Gross horsepower kW (HP)/RPM 1865 (2500)/1900 1865 (2500)/1900 2014 (2700)/1900
Net horsepower kW (HP)/RPM 1761 (2360)/1900 1761 (2360)/1900 1902 (2550)/1900
HAULING CAPACITY:
Maximum load m. ton (US ton) 231 (255) 228 (250) 290 (320)
Heaped capacity (2:1) m3 (yd3) 147 (193) 147 (193) 211 (276)
PERFORMANCE:
Maximum speed km/h (MPH) 48.8 (30.3) 64.0 (40) 64.5 (40)
Turning radius m (ft.in) 14.2 (46'5") 14.2 (46'5") 15.2 (48'9")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SDA16V160 SDA16V160 SSDA18V170
No. of cylinders- 16 16 18
bore × stroke mm (in) 159 × 190 159 × 190 170 × 190
(6.26 × 7.48) (6.26 × 7.48) (6.69 × 7.48)
Displacement ltr. (in3) 60.2 (3673) 60.2 (3673) 70.0 (4,271)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 40.00 R57 × 2 40.00 R57 × 2 53/80-R63 x 2
Rear tire 40.00 R57 × 4 40.00 R57 × 4 53/80-R63 x 4
CAPACITY: Fuel tank ltr. (U.S. Gal) 4542 (1200) 4542 (1200) 4542 (1200)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded.
*** Weight includes lubricants, coolant, 50% fuel tank and standard body. Max. gross vehicle weight, including optional equipment,
lubricants, coolant, 50% fuel tank and payload, with large tires installed, shall not be exceeded.
4A-7
Specifications RIGID
DUMP TRUCKS
Model
930E-3SE***
Item
WEIGHT: kg (lb)
Empty vehicle weight* 212994 (469,567)
Distribution (front) 106284 (234,314)
(rear) 106710 (235,253)
Gross vehicle weight 504400 (1,112,000)
Distribution (front) 166143 (366,280)
(rear) 338257 (745,720)
Max. gross vehicle weight** 504400 (1,112,000)
Gross horsepower kW (HP)/RPM 2500 (2611)/1900
Net horsepower kW (HP)/RPM 2558 (3429)/1900
HAULING CAPACITY:
Maximum load m. ton (US ton) 291 (321)
Heaped capacity (2:1) m3 (yd3) 211 (276)
PERFORMANCE:
km/h (MPH)
Maximum speed 64.5 (40.0)
m (ft.in)
Turning radius 14.85 (48'9")
ENGINE: KOMATSU
Model SSDA18V170
No. of cylinders- 18
bore × stroke mm (in) 170 × 190
(6.69 × 7.48)
Displacement ltr. (in3) 70.0 (4,271)
DIMENSION: See DIMENSIONS
TIRES:
Front tire 53/80-R63
Rear tire 53/80-R63
CAPACITY: Fuel tank ltr. (U.S. Gal) 4542 (1,200)
* Weight includes lubricants, coolant, full fuel tank and standard body.
** Max. gross vehicle weight, including optional equipment, lubricants, coolant, full fuel tank and payload, with large tires installed,
shall not be exceeded.
*** Weight includes lubricants, coolant, 50% fuel tank and standard body. Max. gross vehicle weight, including optional equipment,
lubricants, coolant, 50% fuel tank and payload, with large tires installed, shall not be exceeded.
4A-8
Dimensions RIGID
DUMP TRUCKS
K N
C G
M
S
B
R
Q
H P
D E
J A
Unit: mm (ft.in)
HD255-5 HD325-7 H325-6 HD405-7 HD405-6 HD465-7E0
Tires 16.00-R25 18.00-33-32PR 18.00-33-28PR 18.00-R33 18.00-R33 24.00-35-36PR
7390 8465 8365 8465 8365 9355
A
(24'3") (27'9") (27'5") (27'9") (27'5") (30'8")
3625 4150 4150 4150 4150 4400
B*
(11'11") (13'7") (13'7") (13'7") (13'7") (14'5")
3200 3660 3660 3660 3660 4170
C
(10'6") (12'0") (12') (12'0") (12') (13'8")
3600 3750 3750 3750 3750 4300
D
(11'10") (12'4") (12'4") (12'4") (12'4") (14'1")
2140 2730 2630 2730 2630 3070
E
(7') (8'11") (8'8") (8'11") (8'8") (10'1")
495 — 480 — 480 —
G
(1'7") — (1'7") — (1'7") —
410 — 500 — 500 —
H
(1'4") — (1'8") — (1'8") —
2700 3150 3150 3150 3150 3515
J
(8'10") (10'4") (10'4") (10'4") (10'4") (11'6")
2225 2550 2550 2550 2550 3080
K
(7'4") (8'4") (8'4") (8'4") (8'4") (10'1")
4570 5500 5500 5590 5590 6450
M
(15') (18'1") (18'1") (18'4") (18'4") (21'2")
2995 3380 3380 3380 3380 3870
N
(9'10") (11'1") (11'1") (11'1") (11'1") (12'8")
560 480 530 480 530 560
P
(1'10") (1'7") (1'9") (1'7") (1'9") (1'6")
49° 48° 48° 48° 48° 48°
Q
2975 3220 3200 3450 3430 3600
R
(9'9") (10'7") (10'6") (11'4") (11'3") (11'10")
7110 8000 7885 8000 7885 8800
S
(23'4") (26'3") (25'10") (26'3") (25'10") (28'10")
* Includes canopy spill guard.
** USA source
4A-9
Dimensions RIGID
DUMP TRUCKS
K N
C G
M
S
B
R
Q
H P
D E
J A
Unit: mm (ft.in)
HD465-7 HD605-7E0 HD605-7 HD785-5 HD785-5** HD985-5
Tires 24.00-35-36PR 24.00-R35 24.00-R35 27.00-R49 27.00-R49 30.00-R51
9355 9355 9355 10490 10633 10610
A
(30'8") (30'8") (30'8") (34'5") (34'11") (34'10")
4400 4400 4400 5050 5270 5120
B*
(14'5") (14'5") (14'5") (16'7") (17'3") (16'3")
4170 4170 4170 5210 5423 5210
C
(13'8") (13'8") (13'8") (17'1") (17'10") (17'1")
4300 4300 4300 4950 4950 4950
D
(14'1") (14'1") (14'1") (16'3") (16'3") (16'3")
3070 3070 3070 3390 3377 3510
E
(10'1") (10'1") (10'1") (11'1") (11'1") (11'6")
480 — 490 450 243 350
G
(1'7") — (1'7") (1'6") (10") (1'2")
645 — 645 875 789 875
H
(2'1") — (2'1") (2'10") (2'7") (2'10")
3515 3515 3515 4230 4231 4420
J
(11'6") (11'6") (11'6") (13'11") (13'11") (14'6")
3080 3080 3080 3500 3500 3720
K
(10'1") (10'1") (10'1") (11'6") (11'6") (12'2")
6450 6600 6600 7480 7826 7550
M
(21'2") (21'8") (21'8") (24'7") (25'8") (24'9")
3870 3870 3870 4880 5100 4870
N
(12'8") (12'8") (12'8") (16') (16'9") (16')
560 560 560 810 776 855
P
(1'10") (1'6") (1'10") (2'8") (2'7") (2'10")
48° 48° 48° 48° 48° 47°
Q
3600 3860 3860 4285 4279 4545
R
(11'10") (12'8") (12'8") (14'1") (14'0") (14'11")
8800 8800 8800 10080 10182 10135
S
(28'10") (28'10") (28'10") (33'1") (33'5") (33')
* Includes canopy spill guard.
** USA source
4A-10
Dimensions RIGID
DUMP TRUCKS
K N
C G
M
S
B
R
Q
H P
D E
J A
Unit: mm (ft.in)
HD1500-5 730E 830E 830E-AC 930E-3 930E-3SE
Tires 33.00-R51 37.00R57 40.00R57 40.00R57 53/80R63 53/80-R63
11370 12830 14150 14150 15600 15600
A
(37'4") (42'1") (46'5") (46'5") (51'2") (51'2")
5850 6250 6880 6880 7370 7370
B*
(19'2") (20'6") (22'7") (22'7") (24'2") (24'2")
6090 7250 7260 7260 8690 8690
C
(20'0") (23'9") (23'10") (23'10") (28'6") (28'6")
5400 5890 6350 6350 6350 6350
D
(17'9") (19'4") (20'10") (20'10") (20'10") (20'10")
3495 3660 3960 3960 4780 4800
E
(11'6") (12'0") (13'0") (13'0") (15'8") (15'9")
530 290 60 60 — —
G
(1'9") (1'0") (2.4") (2.4") — —
880 1140 1280 1280 940 940
H
(2'11") (3'9") (4'2") (4'2") (3'1") (3'1")
5010 5570 5770 5770 6150 6150
J
(16'5") (18'3") (18'11") (18'11") (20'2") (20'2)
4020 4680 4880 4880 5300 5300
K
(13'2") (15'4") (16'0") (16'0") (17'4") (17'5")
7625 8430 8870 8870 9380 9380
M
(25'0") (27'8") (29'1") (29'1") (30'9") (30'9")
5705 6850 6860 6860 8330 8150
N
(18'9") (22'6") (22'6") (22'6") (27'4") (26'9")
1650 1760 1840 1840 1550 1550
P
(5'5") (5'9") (6'0") (6'0") (5'1") (5'1")
45° 45° 45° 45° 45° 45°
Q
4965 5610 6710 6710 7060 7060
R
(16'3") (18'5") (22'0") (22'0") (23'2") (23'2")
11440 12510 13410 13410 14020 14020
S
(37'6") (41'1") (44'0") (44'0") (46'0") (46'0")
* Includes canopy spill guard.
4A-11
Use of Performance Curve RIGID
DUMP TRUCKS
How to use the travel performance curve
For assessing a vehicle's grade-ability, travel speed, rim pull, etc. First, draw a vertical line according to the
vehicle's weight (A) and mark the point (B) corresponding to total resistance (the sum of rolling resistance
and grade resistance). Next, draw a horizontal line from (B), then mark (C) where the line intersects the rim
pull curve and read (E) for the rim pull. For travel speed (D), draw a vertical line downward from (C).
For instance, when traveling an 8% gradient and encountering a 5% rolling resistance, a vehicle with a 32 ton
(35-U.S. ton) payload should have a rim pull of 8 tons (17,640 lb) and travel at a speed of 15 km/h (9.3 MPH)
in forward 2nd gear.
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(%)
(A)
-30
-25
F1
-20
F2 -15
F3
-10
F4 (B)
(C) F5
F6
F7 -5
(D)
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0068A
4A-12
HD255-5 RIGID
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton
kN
ton
GROSS WEIGHT
500 50 25 35 45 55 65
50 US ton
400 40 20 30 40 50 60
40 ton
EMPTY LOADED
300 30
30
100 10 20.0
10 90 9
9 80 8
8 15.0
70 7 14.0
7 6 13.0
60 12.0
6 11.0
50 5
5 10.0
9.0
40 4 8.0
4 7.0
30 3 6.0
3
5.0
20 2 4.0
2
3.0
1 10 1 2.0
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
-30 -30
-25 -25
F1
-20 -20
F1 F2
-15 F3 -15
F2
F4
F3 F5 -10
-10
F6
F4
F5 -5
F6 -5
0 10 20 30 40 50 60 0 10 20 30 40 50 60 MPH
MPH
4A-13
HD255-5 RIGID
Performance Curve DUMP TRUCKS
Brake performance
GRADE DISTANCE: 600 m (2,000 ft) GRADE DISTANCE: 900 m (3,000 ft)
-25 -25
F1 F1
-20 -20
F2 F2
-15 -15
F3 F3
F4 F4 -10
-10
F5 F5
F6 F6
-5 -5
0 10 20 30 40 50 60 0 10 20 30 40 50 60 MPH
MPH
GROSS WEIGHT
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING) (%)
-30
-25
F1
-20
F2 -15
F3
-10
F4
F5
F6 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVHM0526
4A-14
HD325-7 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 70 80 90 100 110 120 130 150 180 x103 lb
40
3
80 30 40 50 60 70 80 90 x10 kg
30
60 EMPTY LOADED
20.0
30
F2
10 15.0
20 9 14.0
13.0
8 F3 12.0
RIMPULL
7 11.0
10.0
6 F4 9.0
5 8.0
10 7.0
F5
4 6.0
F6 5.0
3
5 4.0
2 3.0
4 F7
3 2.0
1
2
1 0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
-30 -30
F1
F1 -25 -25
-20 F2 -20
F2
F3
-15 -15
F3
F4
F4 -10 F5 -10
F5 F6
F7
F6
F7 -5 -5
4A-15
HD325-7 RIGID
Performance Curves DUMP TRUCKS
Brake performance
GRADE DISTANCE : 600 m (2,000 ft) GRADE DISTANCE : 900 m (3,000 ft)
F1 F1
-25 -25
-20 -20
F2 F2
F3 -15 F3 -15
F4 F4
F5 -10 -10
F5
F6 F6
F7 F7
-5 -5
GROSS WEIGHT
0 50 100 150 200 x103 lb
3
0 10 20 30 40 50 60 70 80 90 100 x10 kg
EMPTY LOADED
TOTAL RESISTANCE (GRADE + ROLLING) (%)
-30
F1 -25
-20
F2
-15
F3
F4
-10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
4A-16
HD325-6 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
55
50
50 GROSS WEIGHT
45 40 30 40 50 60 70 80 90 100
40 US ton
20 30 40 50 60 70 80 90 100
30 ton
ENGINE SPEED RPM
2600
30 UNLOADED LOADED
20.0
1600
10 15.0
10 9 14.0
9 8 13.0
12.0
8 7 11.0
7 10.0
6 9.0
6 8.0
5
600 5 7.0
4 6.0
4
RIMPULL
5.0
3
3 4.0
2 3.0
2
2.0
1 1
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
FKH00151
Brake performance
-25 -25
F1
F1 F2
-20 -20
F2
-15 F3 -15
F4
F3
-10 F5 -10
F6
F4 F7
F5
F6 -5 -5
F7
0 10 20 30 40 50 60 0 10 20 30 40 50 60 MPH
MPH
4A-17
HD325-6 RIGID
Performance Curves DUMP TRUCKS
Brake performance
Distance: 600 m (1970 ft) Distance: 900 m (2950 ft)
GROSS VEHICLE WEIGHT GROSS VEHICLE WEIGHT
-25 -25
F1 F1
F2 -20 -20
F2
F3 -15 -15
F3
F4
F5 -10 F4 -10
F6 F5
F7 F6
-5 F7 -5
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(% )
-30
Optional exhaust retarder
-25
F1
-20
F2
-15
F3
F4 -10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0068
4A-18
HD405-7 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 70 80 90 100 110 120130 150
3
175 200 225 x10 lb
40
3
80 30 40 50 60 70 80 90 100 x10 kg
30
60 EMPTY LOADED
30 15.0
F2 14.0
10 13.0
20 9 12.0
11.0
8 F3
RIMPULL
10.0
7 9.0
6 F4 8.0
7.0
5
10 6.0
F5
4 5.0
F6
3 4.0
5
3.0
2
4 F7
2.0
3
1
2
1 0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
-30 -30
F1
F1 -25 -25
-20 F2 -20
F2
F3
-15 -15
F3
F4
F4 -10 F5 -10
F5 F6
F7
F6
F7 -5 -5
4A-19
HD405-7 RIGID
Performance Curves DUMP TRUCKS
Brake performance
GRADE DISTANCE : 600 m (1,970 ft) GRADE DISTANCE : 900 m (2,950 ft)
GROSS WEIGHT GROSS WEIGHT
0 50 100 150 200 x103 lb 0 50 100 150 200 x103 lb
3 3
0 10 20 30 40 50 60 70 80 90 100 x10 kg 0 10 20 30 40 50 60 70 80 90 100 x10 kg
EMPTY LOADED EMPTY LOADED
F1
-25 F1 -25
F2 -20 -20
F2
F3 -15 -15
F3
F4
F4
F5 -10 -10
F5
F6
F7 F6
F7
-5 -5
-30
F1 -25
-20
F2
-15
F3
F4
-10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
4A-20
HD405-6 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
55
50
50 GROSS WEIGHT
45 40 40 50 60 70 80 90 100
40 US ton
30 40 50 60 70 80 90 100
30 ton
ENGINE SPEED RPM
2600
UNLOADED LOADED
20.0
1600
15.0
10 14.0
10 9 13.0
12.0
9 8 11.0
8 7 10.0
7 9.0
6 8.0
6
5 7.0
600 5 6.0
4
5.0
RIMPUL L
4
3 4.0
3
3.0
2
2
2.0
1 1
0.9
0.8
0.7
0.6
0.5
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
-30 -30
Optional exhaust retarder
-25 -25
F1 F1
F2
-20 -20
F2
-15 F3 -15
F4
F3
-10 F5 -10
F6
F4 F7
F5
F6 -5 -5
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
4A-21
HD405-6 RIGID
Performance Curves DUMP TRUCKS
Brake performance
F1
-25 -25
F1
F2 -20 -20
F2
F3 -15 -15
F3
F4 F4
F5 -10 -10
F5
F6 F6
F7 F7
-5 -5
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED
TOTAL RESISTANCE (GRADE+ROLLING)(%)
F1
-25
-20
F2
-15
F3
F4 -10
F5
F6
F7 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVBH0073
4A-22
HD465-7E0 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 90 100 110 120 140 160 180 200 220 240 x103 lb
40
80 40 50 60 70 80 90 100 110 x103 kg
30
60 EMPTY LOADED
F1 25.0
7 7.0
6 F5 6.0
5 5.0
10 F6
4 4.0
3 3.0
5
F7
2 2.0
4
1
2
1 0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
F1
-15 -15
F1
F2
F2 -10 F3 -10
F4
F3
F5
F4 F6
-5 F7 -5
F5
F6
F7
4A-23
HD465-7E0 RIGID
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
GRADE DISTANCE : 600 m (2,000 ft) GRADE DISTANCE : 900 m (3,000 ft)
F2
F2
-10 -10
F3
F3
F4
F4
F5
F6 F5
-5 -5
F7 F6
F7
GROSS WEIGHT
0 100 200 300 400 x103 lb
3
0 20 40 60 80 100 120 140 160 180 200 x10 kg
EMPTY LOADED
-40 -35 -30 -25 -20
TOTAL RESISTANCE (GRADE + ROLLING) (%)
-15
F1
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED FVHM0505
4A-24
HD465-7 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
ton
US ton
50
50 40 50 60 70 80 90 100 110120 US ton
40
40 40 50 60 70 80 90 100 110120 ton
30
30
20 20.0
20
15.0
13.0
11.0
10 10.0
10 9.0
8 8.0
8 7.0
6 6.0
6 5 20.
5.0
5 04.0
4
4
3 3.0
3
2.0
2
2
1
1
0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 45 MPH
FVBH0150
Brake performance
0 20 40 60 80 100 120 140 160 180 200 220 US ton 0 20 40 60 80 100 120 140 160 180 200 220 US ton
EMPTY LOADED EMPTY LOADED
-40 -35 -30 -25 -40 -35 -30 -25
-20 -20
TOTAL RESISTANCE (GRADE+ROLLING)(%)
TOTAL RESISTANCE (GRADE+ROLLING)(%)
F1
-15 -15
F1
F2
F2 -10
F3 -10
F3 F4
F5
F4 F6
-5 F7 -5
F5
F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
4A-25
HD465-7 RIGID
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
0 20 40 60 80 100 120 140 160 180 200 220 US ton 0 20 40 60 80 100 120 140 160 180 200 220 US ton
EMPTY LOADED EMPTY LOADED
-40 -35 -30 -25 -40 -35 -30 -25
-20 -20
F2
F2
-10 -10
F3
F3
F4
F4
F5
F6 F5
-5 -5
F7 F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
-15
F1
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
4A-26
HD605-7E0 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 90 100 110 120 140
3
160 180 200 220 240 260 280 x10 lb
40
3
80 40 50 60 70 80 90 100 110 120 130 x10 kg
30
60 EMPTY LOADED
F1
7 6.0
6 F5 5.0
5
10 F6 4.0
4
3.0
3
5
F7
2.0
2
4
1
2
1 0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
F1
-15 -15
F1
F2
F2 -10 F3 -10
F4
F3
F5
F4 F6
-5 F7 -5
F5
F6
F7
4A-27
HD605-7E0 RIGID
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
GRADE DISTANCE : 600 m (1,970 ft) GRADE DISTANCE : 900 m (2,950 ft)
GROSS WEIGHT 3
GROSS WEIGHT
0 100 200 300 400 x10 lb 0 100 200 300 400 x103 lb
3 3
0 20 40 60 80 100 120 140 160 180 200 x10 kg 0 20 40 60 80 100 120 140 160 180 200 x10 kg
EMPTY LOADED EMPTY LOADED
-40 -35 -30 -25 -20 -40 -35 -30 -25 -20
F2
F2
-10 -10
F3
F3
F4
F4
F5
F6 F5
-5 -5
F7 F6
F7
-15
F1
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED FVHM0510
4A-28
HD605-7 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
ton
US ton
50
50 40 50 60 70 80 90 100 110120 US ton
40
40 40 50 60 70 80 90 100 110120 ton
30
30
20.0
20
20 15.0
13.0
11.0
10.0
10 9.0
10 8.0
8 7.0
8
6.0
6
6 5 20.
5.0
5 04.0
4
4 3.0
3
3
2.0
2
2
1
1
0.5
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 45 MPH
FVBH0156
Brake performance
0 20 40 60 80 100 120 140 160 180 200 220 US ton 0 20 40 60 80 100 120 140 160 180 200 220 US ton
EMPTY LOADED EMPTY LOADED
-40 -35 -30 -25 -40 -35 -30 -25
-20 -20
TOTAL RESISTANCE (GRADE+ROLLING)(%)
TOTAL RESISTANCE (GRADE+ROLLING)(%)
F1
-15 -15
F1
F2
F2 -10
F3 -10
F3 F4
F5
F4 F6
-5 F7 -5
F5
F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
4A-29
HD605-7 RIGID
Performance Curves DUMP TRUCKS
Brake performance
Grade distance: 600 m (2,000 ft) Grade distance: 900 m (3,000 ft)
0 20 40 60 80 100 120 140 160 180 200 220 US ton 0 20 40 60 80 100 120 140 160 180 200 220 US ton
EMPTY LOADED EMPTY LOADED
-40 -35 -30 -25 -40 -35 -30 -25
-20 -20
F2
F2
-10 -10
F3
F3
F4
F4
F5
F5
F6 -5 -5
F7 F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
-15
F1
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
4A-30
HD785-5 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
Brake performance
4A-31
HD785-5 RIGID
Performance Curves DUMP TRUCKS
Brake performance
4A-32
HD785-5* RIGID
Performance Curves DUMP TRUCKS
* USA sourced
Travel Performance Curve
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
70
140
60
120
50
100
Rimpull
40
80
30
60 460m(1500ft)
20
40 Continuous
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-33
HD985-5 RIGID
Performance Curves DUMP TRUCKS
Travel Performance Curve
US ton
ton
110 100 GROSS WEIGHT
100 90 80 90 100 110 120 130 140 160 180 200 220 240 260
90 80 US ton
80 70 80 90 100 110 120 130 140 160 180 200 220 240
70 ton
70
60 UNLOADED LOADED
ENGINE SPEED RPM
2600
30
30 15.0
14.0
1600 13.0
12.0
20 11.0
20 10.0
9.0
8.0
7.0
6.0
10
600 10 9 5.0
9 8
8 7 4.0
RIMPULL
7
6
6 3.0
5
5
4
4 2.0
3
3
2
2 1.0
1
0 10 20 30 40 50 6 0 km/h
0 10 15 20 25 30 35 40 45 MPH
Brake performance
Distance: Continuou
s Distance: 450 m (1500 ft)
GROSS VEHICLE WEIGHT GROSS VEHICLE WEIGHT
0 40 80 120 160 200 240 280 320 360 400 440 USton 0 40 80 120 160 200 240 280 320 360 400 440 USton
0 40 80 120 160 200 240 280 320 360 400 ton 0 40 80 120 160 200 240 280 320 360 400 ton
100ton(110US ton) 100ton(110US ton)
EMPTY LOADED -30 -25 EMPTY LOADED -30 -25
TOTAL RESISTANCE (GRADE+ROLLING)(%)
TOTAL RESISTANCE (GRADE+ROLLING)(%)
-20 -20
F2
F2 -10 -10
F3
F3 F4
F5
F4 -5
-5
F5 F6
F7
F6
F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
FVH00418 FVH00415
4A-34
HD985-5 RIGID
Performance Curves DUMP TRUCKS
Brake performance
0 40 80 120 160 200 240 280 320 360 400 ton 0 40 80 120 160 200 240 280 320 360 400 ton
100ton(110US ton) 100ton(110US ton)
EMPTY LOADED -30 -25 EMPTY LOADED -30 -25
F2
F2 -10 -10
F3 F3
F4 F4
F5 F5
-5 -5
F6 F6
F7 F7
0 10 20 30 40 50 60 MPH 0 10 20 30 40 50 60 MPH
FVH00414 FVH00413
-20
With optional
F1 exhaust retader -15
F2
-10
F3
F4
F5 -5
F6
F7
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
VEHICLE SPEED
FVH00417
4A-35
HD1500-5 RIGID
Performance Curves DUMP TRUCKS
Travel performance
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
80
160
70
140
60
120
50
100 460m(1500ft)
Rimpull
40
80
Continuous
30
60
20
40
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-36
730E RIGID
Performance Curves DUMP TRUCKS
Travel performance
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
50
100
40
80
Rimpull
30
60
20
40
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-37
830E RIGID
Performance Curves DUMP TRUCKS
Travel performance
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
50
100
40
80
Rimpull
30
60
20
40
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-38
830E-AC RIGID
Performance Curves DUMP TRUCKS
Travel performance
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
70
140
60
120
50
100
Rimpull
40
80
Short Time
30
60 Continuous
20
40
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-39
930E-3 RIGID
Performance Curves DUMP TRUCKS
Travel performance
x1000
lb
ton
220 100
200 90
180 80
160
70
140
Rimpull
60
120
50
100
40
80
30
60
40 20
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
Brake performance
x1000
lb
ton
70
140
60
120
50
100
Short Time
Rimpull
40
80
30
60
Continuous
20
40
20 10
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
4A-40
Attachments and Options RIGID
DUMP TRUCKS
Muffler
Radiator curtain
Differential lock
Three-way emergency brake
Optional tires
Transmission underguard
Mode selection system Engine underguard
Exhaust retarder Propeller shaft guard
Engine emergency shutoff system Vandalism protection kit
Water separator
Fast fill fuel system
Noise suppression kit
Air dryer
Air tank auto-drain valve
4A-41
Attachments and Options RIGID
DUMP TRUCKS
Description Features
• Vehicle condition can be easily monitored to
confirm functions or perform troubleshooting
efficiently.
• Stored data can be downloaded through
customer provided personal computer with
PMC (power train management control) Komatsu PMC download software to transfer
the data to customer maintenance/production
database.
• Memory card type Payload meter (PLM2) data
can also be downloaded through the same PC
connection port. (HD785/HD985)
Auto Retard Speed Control (ARSC)
Payload meter
• The payload meter measures and records the
amount loaded, and also uses the external
display lamps to show the present payload and
to estimate the weight when the next bucket is
loaded, thereby informing the loader operator.
So it is possible to load the most suitable
amount and to avoid overloading.
• By knowing the production, it becomes
possible to carry out efficiency control of
combinations, and administration of economic
use of the machines.
Exhaust retarder
4A-42
Attachments and Options RIGID
DUMP TRUCKS
Description Features
Three-way emergency brake
Differential lock
Body liner
Body extension
This extends the height of the side of the dump body. This
increases the capacity of the body to ensure the rated load
(For example: the capacity of the HD325-5 is 32 tons)
when handling loads with a low specific gravity.
It is also used to prevent spillage of load caused by
adverse travel conditions (rough road surface, uphill slope,
downhill slope, road with curves).
4A-43
Attachments and Options RIGID
DUMP TRUCKS
Description Features
Muffler (without body heating)
Air dryer
4A-44
Tire Selection RIGID
DUMP TRUCKS
TIRE SELECTION
Tire availability
Komatsu Dump Trucks employ the tubeless tire only.
Every tire size is classified into E3 or E4 codes.
Either E3 or E4 code had CR, GP or HR characteristics to meet specific operating conditions.
The relation between the tire characteristics and operating conditions is shown in the table.
Model Tires size Code Remark Model Tires size Code Remark
16.00-25-28PR E-3, E-4 24.00R35 E-3, E-4
HD605-7
HD255-5 16.00-25-32PR E-3, E-4 24.00-35-48PR E-3, E-4
16.00R25 E-3, E-4 27.00-49-48PR E-3, E-4
HD785-5
18.00-33-32PR E-3, E-4 27.00R49 E-3, E-4
HD325-7 18.00-33 E-3, E-4 HD985-5 30.00R51 E-3, E-4
18.00R33 E-3, E-4 HD785-5* 27.00R49 E-3, E-4
18.00-33-32PR E-3, E-4 HD1500-5 33.00R51 E-4
HD325-6 18.00-33-28PR E-3, E-4 730E 37.00R57 E-4
18.00R33 E-3, E-4 * 40.00-57 E-4
830E
HD405-7 18.00R33 E-3, E-4 40.00R57 E-4
HD405-6 18.00R33 E-3, E-4 40.00R57 E-4
830E-AC
HD465-7E0 24.00-35-36PR E-3, E-4 46/90R57 E-4
HD465-7 24.00R35 E-3, E-4 930E-3 53/80R63 E-4
HD605-7E0 24.00R35 E-3, E-4
*: USA source
NOTE: *When installing radial tires, please use the special rim for radial tire.
TMPH RATING
Where the ambient temperature in an operating environment is high or where a long haul or high-speed drive is required,
the standard tires are sometimes unsuitable because of their small TMPH.
Under the above operating conditions, it is recommended that the optimum tires be determined after obtaining TMPH by
applying the formulas stated in the section 15 and referring to the following table.
NOTE: The TMPH rating is based on U.S. ton (not on metric ton)
TMPH = TKPH ÷ 1.46
4A-45
Tire Selection RIGID
DUMP TRUCKS
TIRE SELECTION GUIDE FOR RIGID DUMP TRUCKS
Inflation
TKPH
Model Tire size Manufacturer* Code Pattern Type pressure Structure
(TMPH)
kgf/cm2 (PSI)
HD255-5 16.00 – 25 BS E-3 RL 2A 139 (95) 5.75 (82) Bias
BS E-4 RLS 2A 111 (76) 5.75 (82) Bias
16.00R25 BS E-4 VRLS 3A 168 (115) 7 (100) Radial
BS E-4 VRLS 1A 146 (100) 7 (100) Radial
BS E-4 VRLS 2A 112 (77) 7 (100) Radial
BS E-4 VZTS 7 (100) Radial
BS E-4 VMTS 3A 179 (123) 7 (100) Radial
BS E-4 VMTS 1A 157 (108) 7 (100) Radial
BS E-4 VMTS 2A 123 (84) 7 (100) Radial
16.00 – 25 TOYO E-3 G-18 SP 175 (120) 5.75 (82) Bias
TOYO E-3 G-18 CR 145 (99) 5.75 (82) Bias
TOYO E-4 G-18ET SP 145 (99) 5.75 (82) Bias
TOYO E-4 G-18ET CR 124 (85) 5.75 (82) Bias
16.00 – 25 YOKOHAMA E-3 Y67 HR-H, HR-V 153 (105) 5.75 (82) Bias
YOKOHAMA E-3 Y67 RE-R, RE-T 139 (95) 5.75 (82) Bias
YOKOHAMA E-3 Y67 CP-S, CP-C 124 (85) 5.75 (82) Bias
YOKOHAMA E-4 Y523 HR-H, HR-V 131 (90) 5.75 (82) Bias
YOKOHAMA E-4 Y523 RE-R, RE-T 117 (80) 5.75 (82) Bias
YOKOHAMA E-4 Y523 CP-S, CP-C 102 (70) 5.75 (82) Bias
YOKOHAMA E-4 Y523U
16.00R25 YOKOHAMA E-4 RB41 HR 162 (111) 7 (100) Radial
YOKOHAMA E-4 RB41 SP 160 (110) 7 (100) Radial
YOKOHAMA E-4 RB41 CP 124 (85) 7 (100) Radial
16.00R25 MICHELIN E-3 XK B 187 (128) 7 (100) Radial
MICHELIN E-3 XR B 204 (140) 7 (100) Radial
MICHELIN E-4 XHD1 A4 105 (72) 7 (100) Radial
MICHELIN E-4 XHD1 A 164 (112) 7 (100) Radial
MICHELIN E-4 XHD1 B 175 (120) 7 (100) Radial
MICHELIN E-4 XHD1 B 152 (104) 7 (100) Radial
MICHELIN E-4 X-QUARRY 93 (64) 7 (100) Radial
16.00 – 25 GY E-3 HRL-3A 5.75 (82) Bias
16.00R25 GY E-3 RL-3+ 2S, 4S 7 (100) Radial
GY E-4 RL-4B 4, 6S 7 (100) Radial
GY E-4 RL-4J 6S 7 (100) Radial
HD325-6 18.00 – 33 BS E-3 RL 1A 212 (145) 5.75 (82) Bias
HD405-6 BS E-3 RL 2A 190 (130) 5.75 (82) Bias
BS E-4 ELS2 1A 182 (125) 5.75 (82) Bias
BS E-4 ELS2 2A 161 (110) 5.75 (82) Bias
18.00R33 BS E-3 VEL 3A 307 (210) 7 (100) Radial
BS E-3 VEL 1A 263 (180) 7 (100) Radial
BS E-3 VEL 2A 213 (146) 7 (100) Radial
BS E-4 VRLS 3A 246 (168) 7 (100) Radial
BS E-4 VRLS 1A 211 (145) 7 (100) Radial
BS E-4 VRLS 2A 170 (116) 7 (100) Radial
BS E-4 VELS 2A 7 (100) Radial
BS E-4 VMTP 2A 7 (100) Radial
BS E-4 VZTS 2A 7 (100) Radial
18.00 – 33 TOYO E-3 G-18 SP 211 (145) 5.75 (82) Bias
TOYO E-3 G-18 CR 182 (125) 5.75 (82) Bias
TOYO E-4 G-18ET SP 167 (114) 5.75 (82) Bias
TOYO E-4 G-18ET CR 145 (99) 5.75 (82) Bias
TOYO E-4 G-36ET CR 145 (99) 5.75 (82) Bias
TOYO E-4 G-36ET CE 109 (75) 5.75 (82) Bias
18.00R33 TOYO E-4 T-432 HR 218 (149) 7 (100) Radial
TOYO E-4 T-432 SP 167 (114) 7 (100) Radial
TOYO E-4 T-432 CR 124 (85) 7 (100) Radial
18.00 – 33 YOKOHAMA E-3 Y67 HR-H 255 (175) 5.75 (82) Bias
YOKOHAMA E-3 Y67 HR-V 280 (192) 5.75 (82) Bias
YOKOHAMA E-3 Y67 RE-R 212 (145) 5.75 (82) Bias
YOKOHAMA E-3 Y67 RE-T 233 (160) 5.75 (82) Bias
YOKOHAMA E-3 Y67 CP-S 190 (130) 5.75 (82) Bias
4A-46
Tire Selection RIGID
DUMP TRUCKS
Inflation
TKPH
Model Tire size Manufacturer* Code Pattern Type pressure Structure
(TMPH)
kgf/cm2 (PSI)
HD325-6 18.00 – 33 YOKOHAMA E-4 Y523 HR-H 219 (150) 5.75 (82) Bias
HD405-6 YOKOHAMA E-4 Y523 RH-V 240 (164) 5.75 (82) Bias
YOKOHAMA E-4 Y523 RE-R 182 (125) 5.75 (82) Bias
YOKOHAMA E-4 Y523 RE-T 197 (135) 5.75 (82) Bias
YOKOHAMA E-4 Y523 CP-S 122 (84) 5.75 (82) Bias
YOKOHAMA E-4 Y523 CP-C 153 (105) 5.75 (82) Bias
YOKOHAMA E-4 Y523U RE-R 168 (115) 5.75 (82) Bias
YOKOHAMA E-4 Y523U RE-T 183 (125) 5.75 (82) Bias
YOKOHAMA E-4 Y523U CP-S 117 (80) 5.75 (82) Bias
YOKOHAMA E-4 Y523U CP-C 146 (100) 5.75 (82) Bias
18.00R33 MICHELIN E-3 XK B 279 (191) 7 (100) Radial
MICHELIN E-3 XR B 305 (209) 7 (100) Radial
MICHELIN E-4 XDT A4 157 (108) 7 (100) Radial
MICHELIN E-4 XDT A 192 (132) 7 (100) Radial
MICHELIN E-4 XDT B 262 (179) 7 (100) Radial
MICHELIN E-4 XKD1 A 157 (108) 7 (100) Radial
MICHELIN E-4 X-QUARRY 122 (84) 7 (100) Radial
MICHELIN E-4 XV C 436 (299) 7 (100) Radial
MICHELIN E-4 X-HAUL 262 (179) 7 (100) Radial
18.00 – 33 GY E-3 HRL-3A 5.75 (82) Bias
GY E-4 HRL-4B 5.75 (82) Bias
18.00R33 GY E-3 RL-3+ 2S, 4S 7 (100) Radial
GY E-4 RL-4B 4S, 6S 7 (100) Radial
GY E-4 RL-4F 4S 7 (100) Radial
GY E-4 RL-4J 4S, 6S 7 (100) Radial
GY E-4 RL-4A 4S 7 (100) Radial
HD465-7 24.00 – 35 BS E-3 RL 1A 328 (225) 5.75 (82) Bias
HD605-7 BS E-3 RL 2A 291 (199) 5.75 (82) Bias
BS E-4 RLS 3A 394 (270) 5.75 (82) Bias
BS E-4 RLS 1A 277 (190) 5.75 (82) Bias
BS E-4 RLS 2A 234 (160) 5.75 (82) Bias
24.00R35 BS E-3 VEL 3A 524 (359) 7 (100) Radial
BS E-3 VEL 1A 448 (307) 7 (100) Radial
BS E-3 VEL 2A 362 (248) 7 (100) Radial
BS E-4 VRLS/VELS 3A 453 (310) 7 (100) Radial
BS E-4 VRLS/VELS 1A 388 (266) 7 (100) Radial
BS E-4 VRLS/VELS 2A 314 (215) 7 (100) Radial
BS E-4 VMTS 3A 489 (335) 7 (100) Radial
BS E-4 VMTS 1A 418 (286) 7 (100) Radial
BS E-4 VMTS 2A 338 (232) 7 (100) Radial
BS E-4 VMTS 1A 388 (266) 7 (100) Radial
BS E-4 VMTS 2A 314 (215) 7 (100) Radial
24.00 – 35 TOYO E-3 G-18 HR 371 (254) 5.75 (82) Bias
TOYO E-3 G-18 SP 327 (224) 5.75 (82) Bias
TOYO E-3 G-18 CR 284 (195) 5.75 (82) Bias
TOYO E-4 G-18ET HR 298 (204) 5.75 (82) Bias
TOYO E-4 G-18ET SP 269 (184) 5.75 (82) Bias
TOYO E-4 G-18ET CR 225 (154) 5.75 (82) Bias
TOYO E-4 G-18ET CE 211 (145) 5.75 (82) Bias
24.00R35 TOYO E-4 T-433 HR 378 (259) 7 (100) Radial
TOYO E-4 T-433 SP 284 (195) 7 (100) Radial
TOYO E-4 T-433 CR 211 (145) 7 (100) Radial
TOYO E-4 T-452 HR 349 (239) 7 (100) Radial
TOYO E-4 T-452 SP 255 (175) 7 (100) Radial
TOYO E-4 T-452 CR 196 (134) 7 (100) Radial
4A-47
Tire Selection RIGID
DUMP TRUCKS
Inflation
TKPH
Model Tire size Manufacturer* Code Pattern Type pressure Structure
(TMPH)
kgf/cm2 (PSI)
HD465-7 24.00 – 35 YOKOHAMA E-3 Y67 HR-H 379 (260) 5.75 (82) Bias
HD605-7 YOKOHAMA E-3 Y67 RE-R 314 (215) 5.75 (82) Bias
YOKOHAMA E-3 Y67 RE-T 343 (235) 5.75 (82) Bias
YOKOHAMA E-3 Y67 CP-C 277 (190) 5.75 (82) Bias
YOKOHAMA E-4 Y527 HR-H 321 (220) 5.75 (82) Bias
YOKOHAMA E-4 Y527 HR-V 353 (242) 5.75 (82) Bias
YOKOHAMA E-4 Y527 RE-R 263 (180) 5.75 (82) Bias
YOKOHAMA E-4 Y527 RE-T 292 (200) 5.75 (82) Bias
YOKOHAMA E-4 Y527 CP-S 175 (120) 5.75 (82) Bias
YOKOHAMA E-4 Y527 CP-C 226 (155) 5.75 (82) Bias
24.00R35 MICHELIN E-3 XK B 474 (325) 7 (100) Radial
MICHELIN E-3 XR B 518 (355) 7 (100) Radial
MICHELIN E-4 XDT A4 266 (182) 7 (100) Radial
MICHELIN E-4 XDT A 326 (223) 7 (100) Radial
MICHELIN E-4 XDT B 444 (304) 7 (100) Radial
MICHELIN E-4 XDT C4 518 (355) 7 (100) Radial
MICHELIN E-4 XKD1 A4 207 (142) 7 (100) Radial
MICHELIN E-4 XKD1 A 266 (182) 7 (100) Radial
MICHELIN E-4 XKD1 B 385 (264) 7 (100) Radial
MICHELIN E-4 X-QUARRY 207 (142) 7 (100) Radial
MICHELIN E-4 X-QUARRY S 281 (192) 7 (100) Radial
MICHELIN E-4 XV C 740 (507) 7 (100) Radial
MICHELIN E-4 X-HAUL 355 (243) 7 (100) Radial
24.00R35 GY E-3 RL-3+ 2S, 4S
GY E-4 RL-4F 4S 7 (100) Radial
GY E-4 RL-4B 4S, 6S 7 (100) Radial
GY E-4 RT-4J 4S, 6S 7 (100) Radial
GY E-4 RT-4A+ 2S, 4S, 4S 7 (100) Radial
HD785-5 27.00 – 49 BS E-3 EL 3A 701 (480) 5.75 (82) Bias
BS E-4 ELS 1A 409 (280) 5.75 (82) Bias
BS E-4 ELS 2A 350 (240) 5.75 (82) Bias
27.00R49 BS E-3 VRL/VEL 3A 753 (516) 7 (100) Radial
BS E-3 VRL/VEL 1A 644 (441) 7 (100) Radial
BS E-3 VRL/VEL 2A 521 (357) 7 (100) Radial
BS E-4 VRLS 3A 600 (411) 7 (100) Radial
BS E-4 VRLS 1A 513 (351) 7 (100) Radial
BS E-4 VRLS 2A 415 (284) 7 (100) Radial
BS E-4 VMTS 3A 702 (481) 7 (100) Radial
BS E-4 VMTS 1A 600 (411) 7 (100) Radial
BS E-4 VMTS 2A 486 (333) 7 (100) Radial
BS E-4 VMTS 3A 636 (436) 7 (100) Radial
BS E-4 VMTS 1A 544 (373) 7 (100) Radial
BS E-4 VMTS 2A 440 (301) 7 (100) Radial
27.00 – 49 TOYO E-3 G-18 HR 611 (418) 5.75 (82) Bias
TOYO E-4 G-18ET HR 720 (493) 5.75 (82) Bias
TOYO E-4 G-18ET SP 592 (405) 5.75 (82) Bias
TOYO E-4 G-18ET CR 360 (210) 5.75 (82) Bias
TOYO E-4 G-18ET CE 291 (199) 5.75 (82) Bias
27.00R49 TOYO E-4 T-432 HR 545 (373) 7 (100) Radial
TOYO E-4 T-432 SP 422 (289) 7 (100) Radial
TOYO E-4 T-432 CR 327 (224) 7 (100) Radial
TOYO E-4 T-433/T-452 HR 516 (353) 7 (100) Radial
TOYO E-4 T-433/T-452 SP 363 (269) 7 (100) Radial
TOYO E-4 T-433/T-452 CR 305 (209) 7 (100) Radial
27.00R49 MICHELIN E-3 XK B 698 (478) 7 (100) Radial
MICHELIN E-3 XR B 763 (523) 7 (100) Radial
MICHELIN E-4 XDT A4 392 (268) 7 (100) Radial
MICHELIN E-4 XDT A 480 (329) 7 (100) Radial
MICHELIN E-4 XDT B4 567 (388) 7 (100) Radial
MICHELIN E-4 XDT B 654 (448) 7 (100) Radial
MICHELIN E-4 XKD1/XDR A4 305 (209) 7 (100) Radial
MICHELIN E-4 XKD1/XDR A 392 (268) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B4 480 (329) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B 567 (388) 7 (100) Radial
4A-48
Tire Selection RIGID
DUMP TRUCKS
Inflation
TKPH
Model Tire size Manufacturer* Code Pattern Type pressure Structure
(TMPH)
kgf/cm2 (PSI)
HD785-5 27.00R49 GY E-3 RL-3+ 7 (100) Radial
GY E-4 RT-4A+ 2, 4S, 6S 7 (100) Radial
GY E-4 RL-4A 2, 4S, 6S 7 (100) Radial
GY E-4 RL-4H 2, 4S, 6S 7 (100) Radial
HD985-5 30.00R51 BS E-3 VMT 3A 1209 (828) 7 (100) Radial
BS E-3 VMT 1A 1018 (697) 7 (100) Radial
BS E-3 VMT 2A 837 (573) 7 (100) Radial
BS E-4 VRLS 3A 717 (491) 7 (100) Radial
BS E-4 VRLS 1A 603 (413) 7 (100) Radial
BS E-4 VRLS 2A 496 (340) 7 (100) Radial
BS E-4 VMTS 3A 702 (481) 7 (100) Radial
30.00R51 TOYO E-4 t-431 CR 429 (294) 7 (100) Radial
30.00R51 MICHELIN E-3 XK B 858 (587) 7 (100) Radial
MICHELIN E-3 XR B 938 (642) 7 (100) Radial
MICHELIN E-4 XHD1 A4 482 (330) 7 (100) Radial
MICHELIN E-4 XHD1 A 590 (404) 7 (100) Radial
MICHELIN E-4 XHD1 B4 697 (477) 7 (100) Radial
MICHELIN E-4 XHD1 B 804 (551) 7 (100) Radial
MICHELIN E-4 XKD1/XDR A 429 (294) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B4 536 (367) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B 643 (440) 7 (100) Radial
30.00R51 GY E-4 RL-4H 3S, 4S 7 (100) Radial
GY E-4 RL-4J TII 3S, 4S 7 (100) Radial
HD1500-5 30.00R51 BS E-4 VMTS 3A 953 (653) 7 (100) Radial
BS E-4 VMTS 1A 802 (549) 7 (100) Radial
BS E-4 VMTS 2A 660 (452) 7 (100) Radial
BS E-4 VMTP 1A 700 (479) 7 (100) Radial
BS E-4 VMTP 2A 591 (405) 7 (100) Radial
BS E-4 VRLS/VELS 3A 807 (553) 7 (100) Radial
BS E-4 VRLS/VELS 1A 679 (465) 7 (100) Radial
33.00R51 TOYO E-4 T-431 HR 625 (428) 7 (100) Radial
TOYO E-4 T-431 SP 582 (399) 7 (100) Radial
TOYO E-4 T-431 CR 473 (324) 7 (100) Radial
33.00R51 MICHELIN E-4 XDT A4 558 (382) 7 (100) Radial
MICHELIN E-4 XDT A 682 (467) 7 (100) Radial
MICHELIN E-4 XDT B4 806 (552) 7 (100) Radial
MICHELIN E-4 XDT B 930 (637) 7 (100) Radial
MICHELIN E-4 XKD1/XDR A 496 (340) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B4 620 (425) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B 744 (510) 7 (100) Radial
4A-49
Tire Selection RIGID
DUMP TRUCKS
Inflation
TKPH
Model Tire size Manufacturer* Code Pattern Type pressure Structure
(TMPH)
kgf/cm2 (PSI)
730E 37.00R57 BS E-4 VRLS/VELS 3A 1003 (687) 7 (100) Radial
BS E-4 VRLS/VELS 1A 845 (579) 7 (100) Radial
BS E-4 VRLS/VELS 2A 694 (475) 7 (100) Radial
BS E-4 VELSL 3A 1200 (822) 7 (100) Radial
BS E-4 VZTS 3A 1003 (687) 7 (100) Radial
BS E-4 VZTS 1A 845 (579) 7 (100) Radial
BS E-4 VZTS 2A 694 (475) 7 (100) Radial
37.00R57 TOYO E-4 T-433 HR 1018 (697) 7 (100) Radial
TOYO E-4 T-433 SP 844 (578) 7 (100) Radial
TOYO E-4 T-433 CR 676 (463) 7 (100) Radial
37.00R57 MICHELIN E-4 XKD1/XDR A 678 (464) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B4 848 (581) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B 1018 (697) 7 (100) Radial
MICHELIN E-4 XKD1/XDR C4 1145 (784) 7 (100) Radial
830E 40.00R57 BS E-4 VRLS/VELS 3A 1117 (765) 7 (100) Radial
BS E-4 VRLS/VELS 1A 940 (644) 7 (100) Radial
BS E-4 VRLS/VELS 2A 773 (529) 7 (100) Radial
BS E-4 VELSL 3A 1400 (959) 7 (100) Radial
BS E-4 VZTS/VRDP 3A 1117 (756) 7 (100) Radial
BS E-4 VZTS/VRDP 1A 940 (644) 7 (100) Radial
BS E-4 VZTS/VRDP 2A 773 (529) 7 (100) Radial
830E 40.00 – 57 TOYO E-4 G-18ET HR 948 (649) 5.75 (82) Bias
TOYO E-4 G-18ET SP 693 (475) 5.75 (82) Bias
TOYO E-4 G-18ET CR 591 (405) 5.75 (82) Bias
40.00 – 57 YOKOHAMA E-4 Y523 HR-H 715 (490) 5.75 (82) Bias
YOKOHAMA E-4 Y523 HR-V 788 (540) 5.75 (82) Bias
YOKOHAMA E-4 Y523 RE-R 598 (410) 5.75 (82) Bias
YOKOHAMA E-4 Y523 RE-T 657 (450) 5.75 (82) Bias
YOKOHAMA E-4 Y523 CP-S 409 (280) 5.75 (82) Bias
YOKOHAMA E-4 Y523 CP-C 511 (350) 5.75 (82) Bias
40.00R57 MICHELIN E-4 XKD1/XDR A 768 (526) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B4 960 (658) 7 (100) Radial
MICHELIN E-4 XKD1/XDR B 1152 (789) 7 (100) Radial
MICHELIN E-4 XKD1/XDR C4 1296 (888) 7 (100) Radial
930E 53/80R63 BS E-4 VRLS/VELS 3A 1408 (964) 7 (100) Radial
BS E-4 VRLS/VELS 1A 1150 (788) 7 (100) Radial
BS E-4 VRLS/VELS 2A 974 (667) 7 (100) Radial
BS E-4 VRLSA 3A 1512 (1036) 7 (100) Radial
BS E-4 VRLSA 1A 1233 (845) 7 (100) Radial
BS E-4 VRLSA 2A 1045 (716) 7 (100) Radial
4A-50
Tire Selection RIGID
DUMP TRUCKS
TIRE PATTERN
BRIDGESTONE
TOYO
4A-51
Tire Selection RIGID
DUMP TRUCKS
TIRE PATTERN
YOKOHAMA
Y-67 Y-523
MICHELIN
GOODYEAR
4A-52
Body selection RIGID
DUMP TRUCKS
1. Body selection
When it comes to selecting the body, it is necessary to consider the specific work application, size of rocks,
specific gravity of material and loading machines etc.
Select the optimum body according to the chart shown below.
If similar dump trucks are working at a specific job sites, please refer to the body types used when making
selection.
1 2 3 4
Selection Selection Selection
Selection of canopy of
of
of body spill guard tailgate
body
2) Rock body
• Rock body is suitable for job sites requiring
the handling of rocks such as macadam, in
limestone mines and for civil engineering etc.
• Total face of inner body is lined with steel
liners.
3) Rubber liner body
• Rubber liner body is suitable for job sites
where large diameter rocks such as ripraps
are loaded.
• Rubber liners are installed on the bottom face
of the body and steel liners are installed on
the other faces.
Liner-less body Rock body Rubber liner body
Durability of body
Body Shock
selection Operator comfort at loading
point Noise
Price comparison (1 : most expensive) 3 2 1
Below 0.5 m or 0.16 ton
Wheel loader Below 1.0 m or 1.3 ton X
Propriety by
Standard for Below 1.5 m or 4.4 ton X X
loading
size of rocks Below 0.5 m or 0.16 ton
machines Hydraulic
Below 1.0 m or 1.3 ton
excavator
Below 1.5 m or 4.4 ton X
Remarks : Ordinary : Excellent
: Best X : Prohibited
: Possible when loading height is lower than body top end.
4A-53
Body selection RIGID
DUMP TRUCKS
4A-54
Body selection RIGID
DUMP TRUCKS
3. Available body
HD985-5
Model HD785-5
64m3 (83.7 yd3) 70m3(91.6 yd3)
Liner less Liner body Rubber liner Liner less Liner body Liner less Liner body
Body type
body (STD) (OP) body (OP) body (STD) (OP) body (STD) (OP)
Rock type x — —
Steel liner 4-face liner — — — — — — —
Liner
Half liner — — — — — —
Rubber liner t =105mm (4.1 in) x x x x x x
200mm (7.9 in) x x x x x x x
Body extension 250mm (9.8 in) x x x x x x x
300mm (11.8 in) x x x x x x x
150mm (5.9 in) — — — — — — —
200mm (7.9 in)
Canopy spill guard
250mm (9.8 in) — — — — — — —
300mm (11.8 in)
4A-55
Body selection RIGID
DUMP TRUCKS
Model HD785-5**
Liner less Rock body Rubber liner
Body type
body (STD) (OP) body (OP)
Rock type X
Steel liner 4-face liner — — —
Liner
Half liner — — —
Rubber liner t=105mm (4.1 in) X X
200mm (7.9 in)
250mm (9.8 in)
Body extension
300mm (11.8 in)
500mm (19.7 in)
150mm (5.9 in)
200mm (7.9 in)
Canopy spill guard 250mm (9.8 in)
275mm (10.8 in)
300mm (11.8 in)
4A-56
Body selection RIGID
DUMP TRUCKS
HD405-7/HD405-6 Liner (Option 2)
Plate thickness
No. Part
mm (in)
1 Bottom plate 14 (0.55)
2 Side plate —
3 Front plate (center) 14 (0.55)
4 Front plate (side) 14 (0.55)
5 Canopy top plate —
6 Corner (bottom-side) —
7 Corner (bottom-front) —
8 Canopy corner (center) —
9 Canopy corner (side) —
Liner weight kg (lb) 2070 (4,560)
HD465-7E0/HD465-7
Rock body with 200 mm (7.9 in) body extension
Plate thickness
No. Part
mm (in)
1 Bottom plate 19 (0.75)
2 Side plate 12 (0.47)
3 Front plate (center) 16 (0.63)
4 Front plate (side) 12 (0.47)
5 Canopy top plate 9 (0.35)
6 Canopy top plate (front) 6 (0.24)
7 Corner (bottom-side) 12 (0.47)
8 Corner (bottom-front) 12 (0.47)
9 Canopy corner (center) 16 (0.63)
10 Canopy corner (side) 12 (0.47)
Liner weight kg (lb) 5950 (13,120)
Plate thickness
No. Part
mm (in)
1 Bottom plate 14 (0.55)
2 Side plate —
3 Front plate (center) 14 (0.55)
4 Front plate (side) 14 (0.55)
5 Canopy top plate —
6 Corner (bottom-side) —
7 Corner (bottom-front) —
8 Canopy corner (center) —
9 Canopy corner (side) —
Liner weight kg (lb) 2610 (5,750)
4A-57
Body selection RIGID
DUMP TRUCKS
HD785-5
Rock body
Plate thickness
No. Part
mm (in)
1 Bottom plate 19 (0.75)
2 Side plate 12 (0.47)
3 Front plate (center) 16 (0.63)
4 Front plate (side) 12 (0.47)
5 Canopy top plate 9 (0.35)
6 Canopy top plate (front) 6 (0.24)
7 Corner (bottom-side) 12 (0.47)
8 Corner (bottom-front) 12 (0.47)
9 Canopy corner (center) 16 (0.63)
10 Canopy corner (side) 12 (0.47)
Liner weight kg (lb) 7895 (17,405)
HD785-5*
Plate thickness mm (in)
No Part
A B C D
1 Floor 16 (0.63") 12 (0.47") 19 (0.75") 19 (0.75")
2 Front 9 (0.35") 9 (0.35") 12 (0.47") 12 (0.47")
3 Side 9 (0.35") 9 (0.35") 12 (0.47") 9 (0.35")
4 Side corner 12 (0.47") 12 (0.47") 12 (0.47") 12 (0.47")
5 Front corner 12 (0.47") 12 (0.47") 12 (0.47") 12 (0.47")
* :USA source
4A-58
Body selection RIGID
DUMP TRUCKS
5. Liner thickness of rubber liner body and
weight
HD325-7/HD325-6 Plate thickness
No. Part
mm (in)
1 Bottom plate (rubber) 105 (4.13)
2 Side plate 16 (0.63)
3 Front plate (center) 22 (0.87)
4 Front plate (side) 16 (0.63)
5 Canopy top plate 9 (0.35)
6 Corner (bottom-side) 16 (0.63)
7 Corner (bottom-front) 16 (0.63)
8 Canopy corner (center) 22 (0.87)
9 Canopy corner (side) 16 (0.63)
10 Bottom plate rear (stopper) 100 × 100 (3.94 × 3.94)
Liner weight kg (lb) 5095 (57,230)
4A-59
Body selection RIGID
DUMP TRUCKS
HD985-5
Extension Item HD785-5 64 m3 70 m3
(83.7 cuyd) (91.6 cuyd)
Body capacity m3 40.0/60.0 45.0/64.0 48.0/70.0
Without body Struck/heaped (yd3) (52.3/78.5) (58.9/83.7) (62.8/91.6)
extension Loading height 4285 4545 4565
mm (ft.in) (14'1") (14'11") (15')
Body capacity m3
— — —
200 mm Struck/heaped (yd3)
(7.9 in) Loading height — — —
mm (ft.in)
Body capacity m3
— — —
250 mm Struck/heaped (yd3)
(9.8 in) Loading height
— — —
mm (ft.in)
Body capacity m3
— — —
300 mm Struck/heaped (yd3)
(11.8 in) Loading height
— — —
mm (ft.in)
30.00-R51 30.00-R51
Installed tire size 27.00-R49
(E3) (E4)
Remarks *:Standard equipment for HD465-7 rock body
4A-60
Body selection RIGID
DUMP TRUCKS
2) Body extension selection table
HD325-6, HD325-7
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
HD465-7, HD465-7E0
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
HD785-5
Specific gravity (Loose condition)
Body capacity
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 US ton/m3
m3 (ys3)
0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 ton/m3
FVBH0269
4A-61
Body selection RIGID
DUMP TRUCKS
7. Canopy spill guard selection
Canopy spill
guard
FVBH0035
HD985-5
HD605-7E0
Spill guard height Item HD785-5 64 m3 70 m3
HD605-7
(83.7 cu.yd) (91.6 cu.yd)
Mounting method
Weld-on — — —
150 mm (5.9 in)
Overall height
4400 (14'5") — — —
mm (ft.in)
**Weld-on **Weld-on **Weld-on
Mounting method —
(STD) (STD)
200 mm (7.9 in)
Overall height —
5050 5120 5140
mm (ft.in) (16'7") (16'10") (16'10")
Mounting method
*Weld-on *Weld-on *Weld-on *Weld-on
300 mm (11.8 in)
Overall height
4550 (14'11") 5150 (16'11") 5220 (17'2") 5240 (17'2")
mm (ft.in)
Installed tire size 24.00R35 27.00-R49 30.00-R51(E3) 30.00-R51(E4)
Remarks *:When installing optional spill guard, remove standard or other spill guard.
*:200 mm (7.9 in) spill guard is standard equipment.
4A-62
Production RIGID
DUMP TRUCKS
TRAVEL TIME (One way)
UNIT: MIN.
AVERAGE TRAVEL SPEED KM/HR (MPH)
DISTANCE ONE WAY
5 10 15 20 25 30 35 40 45 50 55 60
METERS FEET (3.1) (6.2) (9.3) (12.4) (15.5) (18.6) (21.7) (24.9) (28.0) (31.1) (34.2) (37.3)
50 160 0.60 0.30 0.20 0.15 0.12 0.10 0.09 0.88 0.07 0.06 0.05 0.05
100 330 1.20 0.60 0.40 0.30 0.24 0.20 0.17 0.15 0.13 0.12 0.11 0.10
200 660 2.40 1.20 0.80 0.60 0.48 0.40 0.34 0.30 0.27 0.24 0.22 0.20
300 980 3.60 1.80 1.20 0.90 0.72 0.60 0.51 0.45 0.40 0.36 0.33 0.30
500 1640 6.00 3.00 2.00 1.50 1.20 1.00 0.86 0.75 0.67 0.60 0.55 0.50
1000 3280 12.00 6.00 4.00 3.00 2.40 2.00 1.71 1.50 1.33 1.20 1.09 1.00
1500 4920 18.00 9.00 6.00 4.50 3.60 3.00 2.57 2.25 2.00 1.80 1.64 1.50
2000 6560 24.00 12.00 8.00 6.00 4.80 4.00 3.43 3.00 2.67 2.40 2.18 2.00
3000 9840 36.00 18.00 12.00 9.00 7.20 6.00 5.14 4.50 4.00 3.60 3.27 3.00
5000 16410 60.00 30.00 20.00 15.00 12.00 10.00 8.57 7.50 6.67 6.00 5.45 5.00
Cycle time = Loading time + Hauling time +Dumping time + Return time + Spot & delay time
Determine hauling and return time from the above table respectively.
Loading time = (Loader cycle time) × (No. of cycles to fill dump truck)
Average fixed time (dumping, spot & delay): 1.25 ~ 1.65 min.
4A-63
MEMO
SECTION 4B
ARTICULATED
DUMP TRUCKS
CONTENTS
Features .................................................................... 4B-2
Specifications ........................................................... 4B-5
Dimensions ............................................................... 4B-6
Use of Performance Curve ...................................... 4B-7
Performance Curve .................................................. 4B-8
HM300-2 ................................................................ 4B-8
HM300-1 ................................................................ 4B-9
HM350-2 .............................................................. 4B-10
HM350-1 .............................................................. 4B-11
HM400-2 .............................................................. 4B-12
HM400-1 .............................................................. 4B-13
Ground Pressure .................................................... 4B-14
Tire Selection .......................................................... 4B-16
4B-1
Features ARTICULATED
DUMP TRUCKS
Ecology Features
ecot3 (EPA Tier 3, EU stage 3A certified
engine)
Komatsu develops and produces all major
components, such as engines, electronics and
hydraulic components in house.
With this “Komatsu Technology”, and adding
customer feedback, Komatsu is achieving great
advancements in technology.
To achieve high levels of productivity and ecology,
Komatsu developed the main components with an
advanced control system.
The result is a new generation of high performance
and environment friendly machines.
4B-2
Features ARTICULATED
DUMP TRUCKS
Comfortable operator environment • Hydropneumatic Suspension for All
Terrain
• Wide, Spacious Cab The hydropneumatic suspension assures a
The wide cab provides a comfortable space for comfortable ride even over rough terrain and
the operator and a full size buddy seat. Large, ensures maximum productivity and operator
electrically operated windows and the operator’s confidence.
seat positioned to the left side ensure superior
visibility. • Air Suspension Seat
The air suspension fabric covered seat which is
• Ergonomically Designed Cab adjustable to the operator’s weight is provided as
The ergonomically designed operator’s standard.
compartment makes it very easy and comfortable
for the operator to use all the controls. • Electric Body Dump Control Lever
The extra light lever makes dumping easier than
• Viscous Cab Mounts ever.
Viscous mounts reduce the noise transmitted to
the cab and achieve a quiet noise level. • Supplementary Steering and Secondary
Brakes
Supplementary steering and secondary brakes
are standard features.
• Easy-to-See Instrument Panel
The instrument panel makes it easy to monitor
critical machine functions. In addition a caution
light warns the operator of any problems that may
occur. Problems are recorded in the monitor and
indicated as service codes.
Rubber This makes the machine very friendly and easy to
service.
Silicon oil • Steering Wheel and Pedals
Low effort pedals reduce driver fatigue when
working continuously for long periods. The
tiltable, telescoping steering column enables
Easy maintenance operators to maintain the optimum driving
position at all times.
• Tiltable cab
The cab can be tilted rearward to provide easy • Fewer Grease Points
maintenance/service for the engine and We have minimized the number of grease points
transmission. by using maintenance-free rubber bushings and a
lubrication-free oscillating hitch.
Rear frame
Front frame
4B-3
Features ARTICULATED
DUMP TRUCKS
High productivity • Komatsu Designed Electronically
Controlled Transmission
• High performance SAA6D125E-3 and Komatsu designed Electronically Controlled
SAA6D140E-3 Komatsu engines transmission called K-ATOMiCS has been
• Those engine delivers faster acceleration and successfully employed in Komatsu’s rigid dump
higher travel speeds with the highest trucks. The electronic clutch modulation system
horsepower per ton in its class. ensures proper clutch pressure when the clutch is
• The engines meets the USA EPA Tier 2 engaged. the total control system controls both
emission regulations. the engine and transmission by monitoring the
vehicle conditions. This high technology system
• High torque at low speed, impressive assures smooth shifts without shock.
acceleration and low fuel consumption ensure
maximum productivity. • Hydropneumatic Suspension
(HM300-1, HM350-1 and HM400-1) The hydropneumatic suspension has been
• Interaxle & Differential Locking Systems proven on Komatsu’s rigid dump trucks. The front
axle suspension employs “De Dion” type design,
The full-time six-wheel drive system reduces allowing the machine to ride more smoothly over
slippage. A wet multiple-disc interaxle clutch also bumps. The rear-axles are mounted on a dynamic
locks the three axles in unison for greater traction. equalizer structure equipped with
The interaxle lock and differential locks can be hydropneumatic suspension.
switched on and off while the truck is traveling,
thereby boosting productivity.
4B-4
Specifications ARTICULATED
DUMP TRUCKS
Model q q
HM300-2 HM300-1 HM350-2
Item
WEIGHT: kg (lb)
Empty vehicle weight* 24040 (53,000) 22500 (49,600) 31060 (68,470)
Distribution (front) 13414 (29,570) 12770 (28,150) 17828 (39,300)
(center) 5673 (12,510) 5000 (11,020) 6709 (14,790)
(rear) 4953 (10,920) 4730 (10,430) 6523 (14,380)
Gross vehicle weight 51420 (113,360) 49875 (109,950) 63440 (139,860)
Distribution (front) 15580 (34,350) 14860 (10710) 20174 (44,480)
(center) 18150 (40,010) 17805 (39,250) 21696 (47,830)
(rear) 17690 (39,000) 17210 (37,940) 21570 (47,550)
Gross horsepower kW (HP)/RPM 254 (340)/2000 250 (335)/2000 304 (408)/2000
Net horsepower kW (HP)/RPM 246 (329)/2000 242 (324)/2000 294 (394)/2000
HAULING CAPACITY:
Maximum payload m. ton (U.S. ton) 27.3 (30.1) 27.3 (30.1) 32.3 (35.6)
Heaped capacity (2:1) m3 (yd3) 16.6 (21.7) 16.6 (21.7) 19.8 (25.9)
PERFORMANCE:
Maximum speed km/h (MPH) 58.6 (36.4) 59.0 (36.7) 57.1 (35.5)
Turning radius m (ft.in) 7.96 (26'1") 7.96 (26'1") 8.6 (28'3")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D125E-5 SAA6D125E-3 SAA6D140E-5
No. of cylinders- 6-125 × 150 6-125 × 150 6-140 × 165
bore × stroke mm (in) (4.92 × 5.91) (4.92 × 5.91) (5.51 × 6.50)
Displacement ltr. (in3) 11.04 (674) 11.04 (674) 15.24 (930)
DIMENSION: See DIMENSIONS
CAPACITY:Fuel tank ltr. (U.S. Gal) 384 (101.5) 382 (100.9) 493 (130.3)
* Weight includes lubricants, coolant, full fuel tank and standard body.
Model q
Item HM350-1 HM400-2 HM400-1
WEIGHT: kg (lb)
Empty vehicle weight* 28550 (62,940) 32460 (71,560) 30300 (66,800)
Distribution (front) 15850 (34,920) 17885 (39,430) 16790 (37020)
(center) 6350 (14,000) 7400 (16,310) 6755 (14,890)
(rear) 6350 (14,000) 7175 (15,820) 6755 (14,890)
Gross vehicle weight 60925 (134,320) 69040 (152,210) 66875 (147,430)
Distribution (front) 18545 (40,880) 20022 (44,140) 19055 (42,010)
(center) 21190 (46,720) 24647 (54,340) 23910 (51,120)
(rear) 21190 (46,720) 24371 (53,730) 23910 (51,120)
Gross horsepower kW (HP)/RPM 298 (399)/2000 338 (453)/2000 331 (444)/2000
Net horsepower kW (HP)/RPM 290 (389)/2000 327 (438)/2000 321 (430)/2000
HAULING CAPACITY:
Maximum payload m. ton (U.S. ton) 32.3 (35.6) 36.5 (40.0) 36.5 (40)
Heaped capacity (2:1) m3 (yd3) 19.8 (25.9) 22.3 (29.2) 22.3 (29.2)
PERFORMANCE:
Maximum speed km/h (MPH) 57.0 (35.4) 58.5 (36.4) 58.6 (36.4)
Turning radius m (ft.in) 8.4 (27'7") 8.7 (28'7") 8.7 (28'7")
ENGINE: KOMATSU KOMATSU KOMATSU
Model SAA6D140E-3 SAA6D140E-5 SAA6D140E-3
No. of cylinders- 6-140 × 165 6-140 × 165 6-140 × 165
bore × stroke mm (in) (5.51 × 6.50) (5.51 × 6.50) (5.51 × 6.50)
Displacement ltr. (in3) 15.24 (930) 15.24 (930) 15.24 (930)
DIMENSION: See DIMENSIONS
CAPACITY:Fuel tank ltr. (U.S. Gal) 495 (130.8) 493 (130.3) 495 (130.8)
* Weight includes lubricants, coolant, full fuel tank and standard body.
q Tier 3 and stage 3A model
4B-5
Dimensions ARTICULATED
DUMP TRUCKS
T
S
J K
N
Q
B
M
H P
D E F G
C A
FVBH0162
Unit: mm (ft.in)
HM300-2 HM300-1 HM350-2 HM350-1 HM400-2 HM400-1
Tires 23.5-R25 23.5 R25 26.5R25 26.5 R25 29.5-R25 29.5 R25
A 10440 (34'3") 10095 (33'1") 11145 (36'7") 10730 (35'2") 11310 (37'1") 11025 (36'2")
B 3520 (11'7") 3500 (11'6") 3700 (12'1") 3595 (11'10") 3720 (12'2") 3700 (12'2")
C 2900 (9'6") 2900 (9'6") 3250 (10'8") 3250 (10'8") 3450 (11'4") 3450 (11'4")
D 2280 (7'6") 2280 (7'6") 2590 (8'6") 2590 (8'6") 2690 (8'10") 2690 (8'10")
E 4100 (13'5") 4100 (13'5") 4350 (14'3") 4350 (14'3") 4350 (14'3") 4350 (14'3")
F 1710 (5'7") 1710 (5'7") 1850 (6'1") 1850 (6'1") 1970 (6'6") 1970 (6'6")
G 1695 (5'7") 1695 (5'7") 1775 (5'10") 1645 (5'5") 1820 (6'0") 1820 (6'0")
H 510 (1'8") 510 (1'8") 585 (1'11") 585 (1'11") 605 (2'0") 620 (2'0")
J 1600 (5'3") 1600 (5'3") 1600 (5'3") 1600 (5'3") 1600 (5'3") 1600 (5'3")
K 4965 (16'3") 4965 (16'3") 5235 (17'2") 5250 (17'3") 5390 (17'3") 5400 (17'9")
M 2790 (9'2") 2790 (9'2") 2975 (9'9") 2840 (9'4") 2970 (9'9") 2970 (9'9")
N 6340 (21'1") 6445 (21'2") 7035 (23'1") 7035 (23'1") 7130 (23'5") 7130 (23'5")
P 605 (2'0") 605 (2'0") 720 (2'4") 720 (2'4") 720 (2'4") 720 (2'4")
Q (deg.) 70° 70° 70° 70° 70° 70°
R (deg.) 45° 45° 45° 45° 45° 45°
S 7960 (26'1") 7960 (26'1") 8600 (28'3") 8400 (27'7") 8700 (28'7") 8700 (28'7")
T 4010 (13'2) 4010 (13'2") 4200 (13'9") 4060 (13'4") 4170 (13'8") 4170 (13'8")
4B-6
Use of Performance Curve ARTICULATED
DUMP TRUCKS
Use of travel performance curve
For assessing a vehicle's grade-ability, travel speed, rim pull, etc. First, draw a vertical line according to the
vehicle's weight (A) and mark the point (B) corresponding to total resistance (the sum of rolling resistance
and grade resistance). Next, draw a horizontal line from (B), then mark (C) where the line intersects the rim
pull curve and read (E) for the rim pull. For travel speed (D), draw a vertical line downward from (C).
For instance, when traveling an 8% gradient and encountering a 5% rolling resistance, a vehicle with a 36.5
ton (40-U.S. ton) payload should have a rim pull of 8.5 tons (18,740 lb) and travel at a speed of 10 km/h (6.2
MPH) in forward 2nd gear.
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60(A)70 80 90 ton
30 F1
30 EMPTY LOADED
10.0
7 6 9.0
6 8.0
5 F4 7.0
5
4 6.0
4 5.0
3 F5
3 4.0
2 F6 3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
(D)
TRAVEL SPEED
4B-7
HM300-2 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 3
40 50 60 70 80 90 100 110 120 130 x10 lb
3
80 25 30 35 40 45 50 55 60 x10 kg
30
60 EMPTY LOADED
F1
14.0
7 13.0
6 F3 12.0
11.0
10.0
5 9.0
10
4 F4 8.0
7.0
6.0
3
5 F5 5.0
2 4.0
F6
4
3.0
1 2.0
2
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
-35
-30
-25
F1 -20
-15
F2
-10
F3
F4
F5 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
4B-8
HM300-1 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30
30 EMPTY LOADED
25.0
10 20.0
9 F2
10
9 8 15.0
7 14.0
8
RIMPULL
13.0
7 6 F3 12.0
11.0
6 5 10.0
9.0
5 8.0
4 F4
4 7.0
6.0
3
3 F5
5.0
4.0
2
2 F6
3.0
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
WITH EXHAUST(OPTION)
-35
-30
F1
-25
-20
F2
-15
F3
-10
F4
F5 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0165
4B-9
HM350-2 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 3
40 50 60 70 80 90 100 110 120 130 x10 lb
3
80 25 30 35 40 45 50 55 60 x10 kg
30
60 EMPTY LOADED
F1
14.0
7 13.0
6 F3 12.0
11.0
10.0
5 9.0
10
4 F4 8.0
7.0
6.0
3
5 F5 5.0
2 4.0
F6
4
3.0
1 2.0
2
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
-35
-30
-25
F1 -20
-15
F2
-10
F3
F4
F5 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
4B-10
HM350-1 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30 F1
30 EMPTY LOADED
40.0
F2 20.0
10 15.0
10 9 14.0
9 8 F3 13.0
12.0
8 7
RIMPULL
11.0
7 10.0
6
9.0
6 5 8.0
5 F4
7.0
4
6.0
4
5.0
3 F5
3 4.0
2 F6
3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
Brake performance
WITH EXHAUST(OPTION)
-35
F1
-30
-25
F2
-20
F3 -15
F4 -10
F5
F6 -5
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0167
4B-11
HM400-2 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
x103 lb x103 kg
50 GROSS WEIGHT
100 3
40 50 60 70 80 90 100 110 120 130 x10 lb
3
80 25 30 35 40 45 50 55 60 x10 kg
30
60 EMPTY LOADED
F1
14.0
7 13.0
6 F3 12.0
11.0
10.0
5 9.0
10
4 F4 8.0
7.0
6.0
3
5 F5 5.0
2 4.0
F6
4
3.0
1 2.0
2
0 0
0 10 20 30 40 50 60 70 km/h
0 5 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
-35
-30
-25
F1 -20
-15
F2
-10
F3
F4
F5 -5
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
4B-12
HM400-1 ARTICULATED
Performance Curve DUMP TRUCKS
Travel Performance Curve
US ton ton
50
50 GROSS WEIGHT
40 25 30 40 50 60 70 80 90 100 US ton
40
20 30 40 50 60 70 80 90 ton
30 F1
30 EMPTY LOADED
F2 20.0
10 15.0
14.0
10 9 13.0
9 8 F3 12.0
11.0
8 7
RIMPULL
10.0
7 6 9.0
6 8.0
5 F4 7.0
5
4 6.0
4 5.0
3 F5
3 4.0
2 F6 3.0
2
2.0
1
1
0 0
0 10 20 30 40 50 60 70 km/h
0 10 15 20 25 30 35 40 MPH
TRAVEL SPEED
Brake performance
GRADE DISTANCE : COUNTINUOUS DESENT
0 10 20 30 40 50 60 70 80 90 100 110 US ton
0 10 20 30 40 50 60 70 80 90 100 ton
EMPTY LOADED -50 -45
-40
WITHOUT EXHAUST
TOTAL RESISTANCE (GRADE + ROLLING) (%)
WITH EXHAUST(OPTION)
-35
F1
-30
-25
F1
F2 -20
F2 -15
F3
F3
-10
F4
F4 F5
F5 -5
F6
F6
0 10 20 30 40 50 60 70 80 90 100 km/h
0 10 20 30 40 50 60 MPH
TRAVEL SPEED
FVBH0169
4B-13
Ground Pressure ARTICULATED
DUMP TRUCKS
HM300-1
Tire
23.5R25 750/65R25
Item
WEIGHT: kg (lb)
Empty vehicle weight* 22500 (49,600) 23545 (51,910)
Distribution (front) 12770 (28,150) 13125 (28,940)
(center) 5000 (11,020) 5345 (11,780)
(rear) 4730 (10,430) 5075 (11,190)
Gross vehicle weight 49875 (109,950) 50920 (112,260)
Distribution (front) 14860 (10,710) 15220 (33,550)
(center) 17805 (39,250) 18125 (39,960)
(rear) 17210 (37,940) 17575 (38,750)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 1750 (271.3) 2150 (333.3)
Center tire 845 (131.0) 970 (150.4)
Rear tire 800 (124.0) 950 (147.3)
Loaded: Front tire 1960 (303.8) 2380 (368.9)
Center tire 2230 (345.7) 2575 (399.1)
Rear tire 2160 (334.8) 2510 (389.1)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.65 (51.9/357.9) 3.05 (43.4/299.1)
Center tire 2.96 (42.1/290.3) 2.76 (39.2/270.7)
Rear tire 2.96 (42.1/290.3) 2.67 (38.0/261.8)
Loaded: Front tire 3.79 (53.9/371.7) 3.20 (45.5/313.8)
Center tire 3.99 (56.7/391.3) 3.52 (50.1/345.2)
Rear tire 3.98 (56.6/390.3) 3.50 (49.8/343.2)
* Weight includes lubricants, coolant, full fuel tank and standard body.
HM350-1
Tire
Item 26.5R25 800/65R29
WEIGHT: kg (lb)
Empty vehicle weight* 28550 (62,940) 30034 (66,210)
Distribution (front) 15850 (34,920) 16378 (36,110)
(center) 6350 (14,000) 6828 (15,050)
(rear) 6350 (14,000) 6828 (15,050)
Gross vehicle weight 60925 (134,320) 62409 (137,590)
Distribution (front) 18545 (40,880) 18973 (41,830)
(center) 21190 (46,720) 21718 (47,880)
(rear) 21190 (46,720) 21718 (47,880)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 2400 (372.0) 2662 (412.6)
Center tire 1160 (179.8) 1707 (264.6)
Rear tire 1160 (179.8) 1707 (264.6)
Loaded: Front tire 2700 (418.5) 2932 (454.5)
Center tire 2650 (410.8) 3170 (491.4)
Rear tire 2650 (410.8) 3170 (491.4)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.30 (46.9/323.6) 3.08 (43.8/302.0)
Center tire 2.74 (39.0/268.7) 2.00 (28.4/196.1)
Rear tire 2.74 (39.0/268.7) 2.00 (28.4/196.1)
Loaded: Front tire 3.43 (48.8/336.4) 3.24 (46.1/317.8)
Center tire 4.00 (56.9/392.3) 3.43 (48.8/336.4)
Rear tire 4.00 (56.9/392.3) 3.43 (48.8/336.4)
* Weight includes lubricants, coolant, full fuel tank and standard body.
4B-14
Ground Pressure ARTICULATED
DUMP TRUCKS
HM400-1
Tire
29.5R25 875/65R29
Item
WEIGHT: kg (lb)
Empty vehicle weight* 30300 (66,800) 31260 (68,920)
Distribution (front) 16790 (37,020) 17110 (37,720)
(center) 6755 (14,890) 7075 (15,600)
(rear) 6755 (14,890) 7075 (15,600)
Gross vehicle weight 66875 (147,430) 67835 (149,550)
Distribution (front) 19055 (42,010) 19375 (42,710)
(center) 23910 (51,120) 24230 (53,420)
(rear) 23910 (51,120) 24230 (53,420)
GROUND CONTACT AREA: cm2 (in2)
Empty: Front tire 2570 (398.4) 3350 (519.3)
Center tire 1170 (181.4) 2050 (317.8)
Rear tire 1170 (181.4) 2050 (317.8)
Loaded: Front tire 2900 (449.5) 3660 (567.3)
Center tire 3300 (511.5) 3980 (616.9)
Rear tire 3300 (511.5) 3980 (616.9)
GROUND PRESSURE: kg/cm2 (PSI/kPa)
Empty: Front tire 3.27 (46.5/320.7) 2.55 (36.3/250.1)
Center tire 2.89 (41.1/283.4) 1.73 (24.6/169.7)
Rear tire 2.89 (41.1/283.4) 1.73 (24.6/169.7)
Loaded: Front tire 3.29 (46.8/322.6) 2.65 (37.7/259.9)
Center tire 3.62 (51.5/355.0) 3.04 (43.2/298.1)
Rear tire 3.62 (51.5/355.0) 3.04 (43.2/298.1)
* Weight includes lubricants, coolant, full fuel tank and standard body.
4B-15
Tire Selection ARTICULATED
DUMP TRUCKS
TIRE SELECTION GUIDE FOR ARTICULATED DUMP TRUCKS
HM300-1, HM300-2
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
23.5 R25 BS VKT CR E2 ✩✩ 4.5 Soft and muddy surfaces Good traction and floatation
Rubber volume of tread ratio
Wet, soft and muddy (VKT:1, VLT:1.25)
23.5 R25 BS VLT CR E2 ✩✩ 4.5
surface Exellent maneuverability,
traction and floatation
23.5 R25 GY RL-2+ E2 ✩✩ 4.5
23.5 R25 GY GP-2B E2 ✩✩ 4.5 Smoother ride and good traction
23.5 R25 MC XADN E2 4.5
Soft surface and hard soil High wear-resistance, cut and
23.5 R25 TY T-331 CR E3 ✩✩ 4.5
field tip-resistance
F:3.5 Wet, soft and muddy
750/65 R25 BS VLT CR E2 ✩✩ Good traction and floatation
C,R:4.1 surface
F:3.5
750/65 R25 GY RL-2+ E2 ✩✩
C,R:4.1
F:3.5
750/65 R25 MC XAD65-1 E3
C,R:4.1
HM350-1, HM350-2
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
26.5 R25 BS VKT CR E2 ✩✩ 4.5 Soft and muddy surfaces Good traction and floatation
Rubber volume of tread ratio
(VKT:1, VLT:1.25)
26.5 R25 BS VLT CR E2 ✩✩ 4.5 Soft and muddy surfaces
Exellent maneuverability,
traction and floatation
High wear-resistance, cut-
26.5 R25 BS VLTS CR E4 ✩✩ 4.5 Soft and muddy surfaces resistance because of deep
tread (STD:1, VLTS:1.5)
26.5 R25 GY RL-2+ E2 ✩✩ 4.5
26.5 R25 GY GP-2B E2 ✩✩
26.5 R25 GY TL-3A+ E3 ✩✩
26.5 R25 GY GP-4B AT E4 ✩✩
26.5 R25 MC XADN E3T E3
26.5 R25 MC XADT E4T E4 4.5
26.5 R25 MC XADN E3V E3 4.5
Soft surface and under Good traction, anti-sideways slip
26.5 R25 TY T-351 E3 ✩✩
ground and cut-resistance
800/65 R29 GY GP-4D E4 ✩✩ 4.0
4B-16
Tire Selection ARTICULATED
DUMP TRUCKS
HM400-1, HM400-2
Manu- Charac- Star Inflation
Tire size Pattern Code Applicable terrain Feature
facturer* teristics Rating pressure
High wear-resistance, cut-
29.5 R25 BS VLTS CR E4 ✩✩ Soft and muddy surfaces
resistance
29.5 R25 BS VKT CR E2 ✩✩ 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 BS VLT E2 ✩✩ 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 BS VKT E2 ✩✩ 3.8 Soft and muddy surfaces Good traction and floatation
29.5 R25 GY RL-2+ E2 ✩✩ 4.1
29.5 R25 GY GP-2B E2 ✩✩
29.5 R25 GY GP-4B AT E4 ✩✩
29.5 R25 MC XADN E3T E3
29.5 R25 MC XADN E3V E3
29.5 R25 MC XADT E4T E4 4.0
Soft surface and under Good traction, anti-sideways slip
29.5 R25 TY T-351 E3 ✩✩
ground and cut-resistance
875/65 R29 GY GP-4D E4 ✩✩ 4.5
875/65 R29 MC XAD65-1 E3 4.5
4B-17
ARTICULATED
DUMP TRUCKS
TIRE PATTERN
BRIDGESTONE
GOODYEAR
MICHELIN
TOYO
4B-18
SECTION 4C
CRAWLER CARRIERS
CONTENTS
Features .................................................................... 4C-2
Specifications ........................................................... 4C-3
Dimensions ............................................................... 4C-4
4C-1
Features CRAWLER CARRIERS
4C-2
Specifications CRAWLER CARRIERS
Model
CD60R-1 CD110R-2
Item
WEIGHT: kg (lb)
Net weight - Unloaded 8500(18,740) 15600 (34,390)
Gross weight - Loaded 14580(32,150) 26600 (58,640)
HORSEPOWER kW (HP)/RPM 99.3(133)/2000 182 (244)/1900
HAULING CAPACITY:
Max. payload kg (lb) 6000 (13,230) 11000 (24,250)
Heaped capacity m3 (cu.yd) 3.2 (4.2) 6.1 (8.0)
PERFORMANCE:
Travel speed Low km/h (MPH) 6.0 (3.7) 4.5 (2.8)
High km/h (MPH) 8.5 (5.3) 10.0 (6.2)
Swing radius of upper structure mm (ft.in) 2695 (8'10") 3170 (10'5")
DIMENSION: mm (ft.in)
Overall length 4825(15'10") 5405 (17'9")
Overall width 2640 (8'8") 3330 (10'11")
Overall height (at transport) 2775 (9'1") 3185 (10'5")
Track gauge 1790 (5'10") 2080 (6'10")
Track length, between tumblers 3190 (10'6") 3850 (12'8")
ENGINE: KOMATSU KOMATSU
Model S6D102E-1 SAA6D114E-2
No. of cylinders- mm (in) 6-102 × 120 6-114 × 135
bore × stroke (4.02 × 4.72) (4.49 × 5.31)
Piston displacement Itr. (cu.in) 5.88 (3.59) 8.27 (505)
UNDERCARRIAGE:
No. of rollers (carrier/track) 2/8 2/8
Track shoes Steel reinforced rubber shoe Steel reinforced rubber shoe
Width of shoe, standard mm (in) 600 (23.6) 800 (31.5)
CAPACITY (Refilled):
Fuel tank ltr. (U.S. Gal) 130 (34.3) 300 (79.3)
4C-3
Dimensions CRAWLER CARRIERS
CD60R-1
140
2220
2095
110 2695
2550
2230 2455
4685
2640
2450 110 2725
4360
400
58˚
2775
1855
1455
2515
920
930
500
G.L
600 3190
1790 3840 645
2390
CD110R-2
275 11" 28
65
9'
5"
Transportation 3050 10'
10'5"
2680 8'10"
3170
3290 10'10"
Transportation 3185 10'5"
˚
60
535 1'9"
2205 7'3"
1895 6'3"
1670 5'6"
1060 3'6"
685 2'3"
FVHM0489
4C-4
SECTION 4D
SLAG DUMP TRUCKS
CONTENTS
Features and specifications .................................... 4D-2
4D-1
Features and Specifications SLAG DUMP TRUCKS
• The slag dump trucks are based on the off-highway dump trucks.
Main components such as engines, power trains and frames are commonly used on construction
machinery and are of proven strength, thus providing superior durability, reliability and parts supply.
• All work equipment can be operated from the cab.
In addition, outrigger and pot pins are also operable from outside the cab thus ensuring greater safety.
• Pot loading / unloading has been simplified on self-loading specification trucks, by the use of hooks which
have been mounted on the arm.
• The arm, table and cab have been designed taking the heat factor into full consideration for safe
operation.
• Comfortable cab, superior front visibility and ball-screw steering enable smooth, light operation for
superior operability.
• The installation of large-size tires, adoption of sintered alloy for the clutch lining and changed spring have
led to an increased torque capacity ratio among other improvements.
Therefore trucks have more than enough durability for heavy-duty operations.
Specifications
4D-2
CONTENTS
INDEX
SECTION 5
MOTOR GRADERS Sec 5A
VIBRATORY ROLLERS Sec 5B
OTHER ROAD MAINTENANCE Sec 5C
EQUIPMENT
SECTION 5A
MOTOR GRADERS
CONTENTS
Features .................................................................... 5A-2
Specifications ........................................................... 5A-4
Dimensions ............................................................... 5A-6
Attachment Availability ............................................ 5A-8
Scarifier Specifications ........................................... 5A-9
Front Dozer Blade Specifications ......................... 5A-12
Rear Mounted Ripper Specifications ................... 5A-13
Upper Attachments ................................................ 5A-14
Tire Availability and TMPH .................................... 5A-15
Attachments and Options ..................................... 5A-16
5A-1
Features MOTOR GRADERS
FVBH0015
5A-2
Features MOTOR GRADERS
Max. uptime
• Non-spin differential
Non-spin differential with automatic locking and
unlocking can be installed as an option on the
final drives, assuring the optimum in smooth
steering.
5A-3
Specifications MOTOR GRADERS
Model
GD511A-1 GD555-3A GD555-3C*6 GD611A-1
Item
OPERATING WEIGHT* kg (lb) 10800 (23,810) 13100 (28,880) 14040 (30,950) 12500 (27,555)
HORSEPOWER:
SAE kW (HP)/rpm 101 (135)/2900 119 (160)/2000 119 (160)/2000 116 (155)/2500
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.4 (2.1) 3.3 (2.1) 3.3 (2.1) 3.5 (2.2)
2nd 6.1 (3.8) 4.8 (3.0) 4.8 (3.0) 6.3 (3.9)
3rd 10.7 (6.6) 6.8 (4.2) 6.8 (4.2) 10.8 (6.7)
4th 14.1 (8.8) 9.8 (6.1) 9.8 (6.1) 14.8 (9.2)
5th 25.5 (15.8) 14.9 (9.3) 14.9 (9.3) 26.2 (16.3)
6th 44.5 (27.7) 21.6 (13.4) 21.6 (13.4) 44.6 (27.7)
7th — 29.6 (18.4) 29.6 (18.4) —
8th — 42.9 (26.7) 42.9 (26.4) —
Reverse (Max.) 54.4 (33.8) 39.1 (24.3) 39.1 (24.3) 54.4(33.8)
Max. traction (Drawbar pull) kg (lb) 6140 (13,535) 7490 (16,510) 8030 (17,700) 7100 (15,650)
Min. turning radius** mm (ft.in) 6600 (21'8") 6800 (22'4") 6800 (22'4") 6900 (22'8")
DIMENSIONS:
Treads: Front mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Rear mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Articulation angle (each) degree 27 23 23 26
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D95L SAA6D102E SAA6D102E S6D105
No. of cylinders- mm (in) 6-95 × 115 6 –102 × 120 6 –102 × 120 6 –105 × 120
bore × stroke (3.74 × 4.53) (4.02 × 4.72) (4.02 × 4.72) (4.13 × 4.92)
Piston displacement ltr. (in3) 4.89 (298) 5.88 (359) 5.88 (359) 6.49 (396)
CAPACITY
Fuel tank ltr. (U.S. Gal) 227 (60.0) 340 (90) 340 (90) 285 (75.3)
Model
GD655-3A GD655-3C*6 GD661A-1 GD675-3A
Item
OPERATING WEIGHT* kg (lb) 14070 (31,020) 15000 (33,070) 13300 (29,320) 14870 (32,780)
HORSEPOWER:
SAE kW(HP)/rpm 142 (190)/1990 142 (190)/1900 134 (180)/2500 149 (200)/1900
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.3 (2.1) 3.3 (2.1) 3.5 (2.2) 3.3 (2.1)
2nd 4.7 (2.9) 4.7 (2.9) 6.3 (3.9) 4.7 (2.9)
3rd 6.7 (4.2) 6.7 (4.2) 10.8 (6.7) 6.7 (4.2)
4th 9.7 (6.0) 9.7 (6.0) 14.8 (9.2) 9.7 (6.0)
5th 14.6 (9.1) 14.6 (9.1) 26.2 (16.3) 14.6 (9.1)
6th 21.2 (13.2) 21.2 (13.2) 44.6 (27.7) 21.2 (13.2)
7th 29.1 (18.1) 29.1 (18.1) 29.1 (18.1)
8th 42.2 (26.2) 42.2 (26.2) 42.2 (26.2)
Reverse (Max.) 38.4 (23.9) 38.4 (23.9) 54.4 (33.8) 38.3 (23.8)
Max. traction (Drawbar pull) kg (lb) 8050 (17,750) 8580 (18,920) 7400 (16,315) 8510 (18,760)
Min. turning radius** mm (ft.in) 6900 (22'8") 6900 (22'8") 6900 (22'8") 6900 (22'8")
DIMENSIONS:
Treads: Front mm (ft.in) 2130 (7'0") 2130 (7'0") 2020 (6'8") 2130 (7'0")
Rear mm (ft.in) 2130 (7'0") 2130 (7'0") 2020 (6'8") 2130 (7'0")
Articulation angle(each) degree 23 23 26 23
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E SAA6D114E S6D105 SAA6D114E
No. of cylinders- mm (in) 6 –114 × 135 6 –114 × 135 6 –105 × 125 6 –114 × 135
bore × stroke (4.49 × 5.32) (4.49 × 5.32) (4.13 × 4.92) (4.49 × 5.31)
Piston displacement ltr. (in3) 8.27 (505) 8.27 (505) 6.49 (396) 8.27 (505)
CAPACITY
Fuel tank ltr. (U.S. Gal) 340 (90) 340 (90) 285 (75.3) 340 (90)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*6 USA version
5A-4
Specifications MOTOR GRADERS
Model
GD675-3C*6 GD705A-4 GD825A-2
Item
OPERATING WEIGHT* kg (lb) 15810 (34,850) 17620 (38,580) 26350 (58,090)
HORSEPOWER:
SAE kW(HP)/rpm 149 (200)/1900 149 (200)/2000 209 (280)/2100
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.3 (2.1) 3.9 (2.4) 4.0 (2.5)
2nd 4.7 (2.9) 5.2 (3.2) 5.4 (3.4)
3rd 6.7 (4.2) 7.6 (4.7) 8.0 (5.0)
4th 9.7 (6.0) 11.5 (7.1) 11.5 (7.1)
5th 14.6 (9.1) 15.0 (6.8) 15.8 (9.8)
6th 21.2 (13.2) 20.5 (12.7) 21.4 (13.3)
7th 29.1 (18.1) 30.0 (18.6) 31.3 (19.4)
8th 42.2 (26.2) 43.0 (26.7) 44.9 (27.9)
Reverse (Max.) 38.3 (23.8) 45.9 (28.5) 47.9 (29.8)
Max .traction (Drawbar pull) Kg (lb) 9050 (19,950) 10180 (22,420) 14705 (32,420)
Min. turning radius** mm (ft.in) 6900 (22'8") 7500 (24'7") 7900 (25'11")*5
DIMENSIONS:
Treads: Front mm (ft.in) 2130 (7'0") 2300 (7'7") 2620 (8'7")
Rear mm (ft.in) 2130 (7'0") 2300 (7'7") 2620 (8'7")
Articulation angle (each) degree 23 26 25
ENGINE:
Model KOMATSU KOMATSU KOMATSU
SAA6D114E S6D125 S6D140E
No. of cylinders- mm (in) 6 –114 × 135 6 –125 × 150 6-140 × 165
bore × stroke (4.49 × 5.31) (4.9 × 5.9) (5.51 × 6.50)
Piston displacement ltr. (in3) 8.27 (505) 11.05 (674) 15.24 (930)
CAPACITY
Fuel tank ltr. (U.S. Gal) 340 (90) 400 (105.7) 500 (132.1)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*5 With differential
*6 USA version
5A-5
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
5A-6
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
Model GD825A-2
Item
BLADE: Length mm (ft.in) 4878 (16')
Height* mm (ft.in) 850 (2'9")
TIRES 23.5-25-12PR
DIMENSIONS:
A Height to top of the mm (ft.in) 3300 (10'10")
blade lift cylinders
B Distance between mm (ft.in) 3100 (10'2")
center of front tires and
blade edge
C Wheelbase mm (ft.in) 7100 (23'4")
D Distance between mm (ft.in) 1840 (6')
centers of tandem
wheels
E Height to top of the mm (ft.in) 3490 (11'5")
stack
F Overall height: mm (ft.in)
When installing the
-CANVAS CANOPY
-ROPS CANOPY —
-ROPS CAB (Low) 3550 (11'8")
-ROPS CAB (Hight) 3550 (11'8")
-STEEL CAB —
Articulation angle degree 25
Width over tires: mm (ft.in)
Front 3310 (11'10")
Rear 3310 (11'10")
Ground clearance mm (ft.in) 440 (1'5")
5A-7
Attachment Availability MOTOR GRADERS
:Standard equipment
:Optional equipment
Model GD GD GD GD GD GD GD GD GD
Item 511A-1 555-3A 611A-1 655-3A 661A-1 675-3A 705A-4 825A-2 555-3C*
BLADE
2.2 m (7.2 ft)
2.5 m (8.2 ft)
2.8 m (9.2 ft)
3.05 m (10 ft)
3.1 m (10.2 ft)
3.4 m (11.2 ft)
3.7 m (12.1 ft)
4.0 m (13.1 ft)
4.3 m (14.1 ft)
4.9 m (16.1 ft)
VARIABLE BLADE
HYDRAULIC BLADE TIP
CONTROL
EXTENSION BLADE
FRONT DOZER BLADE
SCARIFIER
5 teeth
6 teeth
7 teeth
9 teeth
11 teeth
REPLACEBLE TIP
TEETH FOR SCARIFIER
REAR MOUNT RIPPER
PUSH PLATE
Model GD GD
Item 655-3C* 675-3C*
BLADE
2.2 m (7.2 ft)
2.5 m (8.2 ft)
2.8 m (9.2 ft)
3.05 m (10 ft)
3.1 m (10.2 ft)
3.4 m (11.2 ft)
3.7 m (12.1 ft)
4.0 m (13.1 ft)
4.3 m (14.1 ft)
4.9 m (16.1 ft)
VARIABLE BLADE
HYDRAULIC BLADE TIP
CONTROL
EXTENSION BLADE
FRONT DOZER BLADE
SCARIFIER
5 teeth
6 teeth
7 teeth
9 teeth
11 teeth
REPLACEBLE TIP
TEETH FOR SCARIFIER
REAR MOUNT RIPPER
PUSH PLATE
* USA version
5A-8
Scarifier Specifications MOTOR GRADERS
Model
500 SERIES *3
Item
NO. OF TEETH 9
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +660 (+1,460) +665 (+1,470)
[+685 (+1,510)] [+690 (+1,520)]
To front axle +565 (+1,250) +570 (+1,260)
[+585 (+1,290)] [+590 (+1,300)]
To rear axle +95 (+210) +95 (+210)
[+100 (+220)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 4440 (9,790) 4335 (9,560)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 51 ~ 64
Max. lift above ground mm (ft.in) 340 (1'1") [530 (1'9")] 320 (1'1") [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") [290 (11.4")] 260 (10.2") [290 (11.4")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 660 (1,460) 665 (1,470)
B: Digging width mm (ft.in) 1065 (3'6") 1090 (3'7")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8 × 3.0 × 1.0) (7.3 × 2.0 × 1 .4)
APPLICABLE MODEL GD510R*3 GD510R*3
GD511A*3 GD511A*3
Model
500 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +690 (+1,520) +565 (+1,250) +695 (+1,530) +570 (+1,260)
[+715 (+1,580)] [+575 (+1,270)] [+720 (+1,590)] [+585 (+1,290)]
To front axle +590 (+1,300) +470 (+1,040) +595 (+1,310) +475 (+1,050)
[+610 (+1,340)] [+475 (+1,050)] [+615 (+1,360)] [+485 (+1,070)]
To rear axle +100 (+220) +95 (+210) +100 (+220) +95 (+210)
[+105 (+230)] [+100 (+220)] [+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 1005 (3'4") 850 (2'9") 960 (3'2")
and center of front tire
SCARIFIER LOAD* kg (lb) 4470 (9,850) 5335 (11,760) 4265 (9,400) 5295 (11,670)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 63 ~ 78 51 ~ 64 53 ~ 69
Max. lift above ground mm (ft.in) 340 (1'1") 350 (1'2") 320 (1'1") 320 (1'1")
[530 (1'9")] [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") 255 (10") 260 (10.2") 265 (10.4")
[290 (11.4")] [365 (1'2")] [290 (11.4")] [365 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 690 (1,520) 565 (1,250) 695 (1,530) 570 (1,260)
B: Digging width mm (ft.in) 1325 (4'4") 1405 (4'7") 1350 (4'5") 1430 (4'8")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
GD510R*3 GD555-3 GD510R*3 GD555-3
GD511A*3 GD511A*3
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod
5A-9
Scarifier Specifications MOTOR GRADERS
Model
600 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight +710 (+1,570) [+720 (+1,590)] +715 (+1,580) [+725 (+1,600)]
kg (lb)
To front axle +615 (+1,360) [+620 (+1,370)] +615 (+1,360) [+625 (+1,380)]
To rear axle +95 (+210) [+100 (+220)] +100 (+220) [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 5055 ~ 5125 (11,140 ~ 11,300) 4753 ~ 5435 (10,480 ~ 11,980)
SCARIFIER RANGE:
Digging angle degree 63 ~ 76 53 ~ 66
Max. lift above ground mm (ft.in) 320 (1'1") 300 (1')
Max. digging depth mm (ft.in) 270 (10.6") 270 (10.6")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 710 (1,570) 715 (1,580)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
APPLICABLE MODEL GD611A*3 GD611A*3
GD661A*3 GD661A*3
Model
600 SERIES
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight +640 (+1,410) +645 (+1,420)
[+650 (+1,430)] [+655 (+1,440)]
To front axle kg (lb) +535 (1,180) +545 (1,200)
[+545 (+1,200)] [+555 (+1,220)]
To rear axle +105 (+230) +100 (+220)
[+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 980 (3'3") 935 (3'1")
and center of front tire
SCARIFIER LOAD* kg (lb) 5670 (12,500) 5635 (12,420)
SCARIFIER RANGE:
Digging angle degree 62 ~ 77 52 ~ 68
Max. lift above ground mm (ft.in) 370 (1'3") 340 (1'1")
Max. digging depth mm (ft.in) 245 (9.6") [345 (1'2")] 250 (9.8") [345 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 640 (1,410) 645 (1,420)
B: Digging width mm (ft.in) 1405 (4'7") 1430 (4'8")
Tooth:
As-installed 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness mm (in) (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
APPLICABLE MODEL GD655-3A, GD675-3A GD655-3A, GD675-3A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod.
5A-10
Scarifier Specifications MOTOR GRADERS
Model GD705A-4
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight kg (lb) +1040 (+2,290) +1050 (+2,310)
To front axle +880 (+1,940) +890 (+1,960)
To rear axle +160 (+350) +160 (+350)
DIMENSIONS:
A: Distance between teeth mm (ft.in) 890 (2'11') 830 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 6690 (14,750) 6630 (14,620)
SCARIFIER RANGE:
Digging angle degree 54~67.5 49~63
Max. lift above ground mm (ft.in) 630 (2'1") 610 (2')
Max. digging depth mm (ft.in) 350 (1'2") 350 (1'2")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 1040 (2,290) 1050 (2,310)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed 265 × 77 × 25 185 × 50 × 36.3
Height × width × thickness mm (in) (10.4 × 3.0 × 1.0) (7.3 × 2.0 × 1.4)
APPLICABLE MODEL GD705A GD705A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
[ ] : When installing the adjustable type lifting rod.
5A-11
Front Dozer Blade MOTOR GRADERS
Specifications
Model GD705A-4
Item
ADDITIONAL WEIGHT:
To operating weight kg (lb) +970 (+2,140)
To front axle +1100 (+2,450)
To rear axle (140 (–310)
ADDITIONAL OVERALL
LENGTH:
A: Distance between blade mm (ft.in) 1610 (5'3")
edge and center of front
tire
BLADE RANGE:
Digging angle degree 55
Max. lift above ground mm (ft.in) 555 (1'10")
Max. drop below ground mm (ft.in) 110 (4.3")
BLADE EQUIPMENT:
Type Front arc, box section type
hydraulically controlled
Weight kg (lb) 910 (2,010)
Length × height mm (ft.in) 2500 × 850
(8'2" × 2'9")
APPLICABLE MODEL GD705A
*: As the front counterweight is removed when installing the front blade, "Additional weight" differs from "Blade weight".
5A-12
Rear Mounted Ripper MOTOR GRADERS
Specifications
5A-13
Upper Attachments MOTOR GRADERS
5A-14
Tire Availability and TMPH MOTOR GRADERS
5A-15
Attachments and Options MOTOR GRADERS
ROPS cab
ROPS canopy
Steel cab
Canopy
Rear under
Extension blade view mirror
Hydraulic tip control
Blade accumulator
Blade float
Rear mounted ripper
5A-16
Attachments and Options MOTOR GRADERS
Description Features
ROPS (Roll Over Protective Structure) cab
The combination of ROPS and a steel cab ensures
safety in places where there is danger of the machine
turning over and to protect the operator from wind, rain,
cold, sand and sun.
Low profile and full height cabs are available. Full height
ROPS cab is 90 mm (3.5")higher than the low profile
cab.
ROPS canopy
5A-17
Attachments and Options MOTOR GRADERS
Description Features
Front blade
Push plate
Scarifier
This attachment digs up hard ground, like asphalt, old
pavement and frozen surfaces cannot be removed by
the blade. The number of teeth used depends upon the
ground hardness.
High-strength alloy steel tips can be mounted on the
teeth to prevent tooth wear and extend their service for
economical performance.
Extension blade
Blade accumulator
5A-18
Attachments and Options MOTOR GRADERS
Description Features
Blade float
Wet type disc brake The brakes are sealed type, so no water or mud can get
in.
This ensures stable braking at all times. Oil lubrication
means wear is kept to the minimum, so the brakes are
maintenance free.
The brakes are operated pneumatically, so a small
operating effort of brake pedal gives secure braking.
There are two brake circuits, so even if one of the air
circuits should be damaged, it is still possible to brake
the machine.
Air dryer
5A-19
MEMO
SECTION 5B
VIBRATORY ROLLERS
CONTENTS
Features .................................................................... 5B-2
Specifications ........................................................... 5B-3
Dimensions ............................................................... 5B-4
5B-1
Features VIBRATORY ROLLERS
5B-2
Specifications VIBRATORY ROLLERS
Model
JV06H-3 JV08H-3 JV25CW-3 JV25DW-3
Item
WEIGHT (approx.):
Operating weight kg (lb) 600 (1,320) 700 (1,540) 2440 (5,380) 2560 (5,640)
Weight distribution:
Front drum 250 (550) 300 (660) 1350 (2,980) 1250 (2,760)
Rear drum 350 (770) 400 (880) 1090 (2,400) 1310 (2,890)
Horsepower kW (HP)/RPM 3.7 (4.9)/2200 4.6 (6.1)/2000 18.9 (25.3)/2300 18.9 (25.3)/2300
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 1st 4.0 (2.5) 4.0 (2.5) 10.0 (6.2) 10.0 (6.2)
2nd — — — —
Cycle of vibration: CPM
Front drum 3300 3300 3300 3300
Rear drum 3300 3300 — 3300
Centrifugal force: kg (lb)
Front drum 600 (1320) 750 (1650) 2100 (4630) 2100 (4630)
Rear drum 600 (1320) 750 (1650) — 2100 (4630)
Compacting width mm (ft.in) 600 (2') 700 (2'4") 1200 (3'11") 1200 (3'11")
Turning radius m (ft.in) — — 3.8 (12'6") 3.8 (12'6")
ENGINE: YAMMAR YAMMAR KOMATSU KOMATSU
Model NFAD6 NFAD8 3D84E 3D84E
No. of cylinders- 1–74 × 72 1–78 × 80 3 – 84 × 90 3 – 84 × 90
bore × stroke mm (in) (2.9 1 × 2.83) (3.07 × 3.15) (3.3 × 3.54) (3.3 × 3.54)
Piston displacement ltr. (in3) 0.309 (18.9) 0.382 (23.3) 1.496 (91.3) 1.496 (91.3)
TRANSMITTING SYSTEM:
Transmission HST HST HST HST
Gearshift Stepless Stepless Stepless Stepless
Reverser Swash-plate Swash-plate Swash-plate Swash-plate
type type type type
Variable- Variable- Variable- Variable-
capacity pump capacity pump capacity pump capacity pump
Final drive Spur gear Spur gear Planetary gear Planetary gear
CAPACITY:
Fuel tank ltr. (U.S. Gal) 5.6 (1.48) 7.1 (1.9) 36 (9.5) 36 (9.5)
Model
JV40DW-5 JV40CW-5
Item
WEIGHT (approx.):
Operating weight kg (lb) 4000 (8,820) 3600 (7,940)
Weight distribution:
Front drum 2000 (4,410) 2000 (4,410)
Rear drum 2000 (4,410) 1600 (3,530)
Horsepower kW (HP)/RPM 20.6 (27.6)/2550 20.6 (27.6)/2550
PERFORMANCE:
Travel speed: km/h (MPH)
Forward and reverse 1st 8.0 (5.0) 8.7 (5.4)
2nd 10.5 (6.5) 12.0 (7.5)
Cycle of vibration: CPM
Front drum 3300 3300
Rear drum 3300 —
Centrifugal force: kg (lb)
Front drum 2500 (5,510) 2500 (5510)
5B-3
VIBRATORY ROLLERS
Dimensions
D
D C
C
O B
R O B
R L
W
W
L
Unit : mm (ft.in)
JV06H-3 JV08H-3 JV25DW-3
650 750 1290
W
(2'2") (2'6") (4'3")
2370 2585 2625
L
(7'9") (8'6") (8'7")
1075 1100 1570
H
(3'6") (3'7") (5'2")
600 700 1200
R
(2') (2'4") (3'11")
520 570 1950
B
(1'8") (1'10") (6'5")
230 225 337.5
O
(9") (9") (1'1")
220 250 280
C
(8") (10") (11")
355 406 675
D
(1'2") (1'4") (2'3")
JV25CW-3
JV40CW-5
D
ø
C
O B
R L
W
Unit : mm (ft.in)
JV25CW-3 JV40DW-5 JV40CW-5 JW40CW-5*
1290 1390 1390 1390
W
(4'3") (4'8") (4'8") (4'8")
2623 3100 3105 3105
L
(8'7") (10'2") (10'2") (10'2")
1570 1730 1730 1730
H
(5'2") (5'8") (5'8") (5'8")
1200 1300 1300 1300
R
(3'11") (4'3") (4'3") (4'3")
1950 2300 2300 2300
B
(6'5") (7'7") (7'7") (7'7")
337.5 400 400 400
O
(1'1") (1'4") (1'4") (1'4")
280 280 280 280
C
(11") (11") (11") (11")
675 800 800 800
D
(2'3") (2'7") (2'7") (2'7")
* : With wide tires
5B-4
SECTION 5C
OTHER ROAD MAINTENANCE
EQUIPMENT
CONTENTS
Komatsu recommendation ...................................... 5C-2
Road subgrade recycling method .......................... 5C-2
Asphalt-pavement profiling method ....................... 5C-3
Road maintenance equipment ................................ 5C-4
Crawler stabilizers ................................................... 5C-5
5C-1
Komatsu Recommendation OTHER ROAD MAINTENANCE
EQUIPMENT
5C-2
Komatsu Recommendation OTHER ROAD MAINTENANCE
EQUIPMENT
5C-3
Road Maintenance OTHER ROAD MAINTENANCE
Equipment EQUIPMENT
1. Lime spreader
In conventional operations, lime or other soil stabilizing agents or soil improvement are spread over the
ground manually or through the use of hydraulic excavators.
2. Crawler stabilizer
This is Komatsu's efficient alternative to conventional road subbase rehabilitation/improvement methods,
especially where the ground is soft, owing to the use of hydraulic exacavators or intensive, physical labor.
A single passage of the crawler stabilizer effectively crumbles old pavements; a stabilizing agent is mixed,
and the crushed materials are then used as the subbase material for the new pavement. Two digging
depths are available. The CS360SD can dig down to 1.2 meters (3'11''), the CS360 down to 0.7 meters
(2'4''), and the CS210 down to 0.6 meters (2').
3. Road cutters
Usually, uneven road surfaces and ruts are removed by road cutters. In this case, the dirt is removed
manually.
Komatsu's GC380F, which comes with a feeder, effectively scrapes jutting road surfaces and automatically
loads the waste into a dump truck. Another advantage is that a single operator of less experience can
control this machine with the equal skill of two veteran operators.
4. Motor Graders
Komatsu provides an excellent range of motor graders in various sizes depending on specific grading
requirements.
5. Vibratory rollers
Komatsu also offers a wide range of vibratory rollers in various configurations depending on specific
compaction requirements .
5C-4
Crawler Stabilizer OTHER ROAD MAINTENANCE
CS360-2 EQUIPMENT
Features
Komatsu's sophisticated crawler stabilizer crumbles old pavements and mixes the resulting splinters with
lime or other stabilizing agent, simultaneously. When it comes to road rehabilitation or soil improvement work,
it is truly a paragon of efficiency. High traveling stability is assured by superb machine weight balance and
crawlers equipped with swamp shoes. This enables the machine to operate even on soft terrain, ensuring
constant digging / mixing depth.
Great productivity:
The high-power Komatsu diesel engine provides a massive output
of 355 HP (265 kW) for CS360 and a large torque, making it easy to
perform mixing operations at a high working speed.
High mixing performance:
Powerful up-cut method, ideal bit alignment and the optimal rotor
speed are combined to provide exceptional mixing performance.
Komatsu's original secondary crushing mechanism enables the
machine to demonstrate high mixing performance even when
working in clayey soil conditions.
Large digging depth:
The CS360 with the standard stabilizer can dig down to 700 mm
(2'4").
The CS360SD with the special deep stabilizer can dig down to 1200 mm (3'11")
Wide rotor offset:
The CS360 offset mechanism makes it possible to extend the rotor 170 mm (6.7") beyond the outer edge of
the left track. The CS360SD offset mechanism makes it possible to extend the rotor 140 mm (5.5") beyond
the outer edge of the track.
5C-5
Crawler Stabilizer OTHER ROAD MAINTENANCE
CS360-2 EQUIPMENT
CS360-2
CS360-2
Max. mixture depth mm (ft.in) 700 (2'4")
Digging width mm (ft.in) 2000 (6'7")
Engine output HP (kW) 355 (265)
Operating weight kg (lb) 24400 (53,790)
Rotor shift distance (LH & RH both) mm (ft.in) 500 (1'8")
Overhang distance (LH) mm (in) 170 (6.7")
Ground pressure kg/cm2 (PSI) 0.38 (5.40)
DIMENSIONS
Overall length × overall width × overall height mm (ft.in) 9500 × 2980 × 3640 (31'2" × 9'9" × 11'11")
Length of track on ground mm (ft.in) 3840 (11'11")
Shoe width mm (in) 860 (34')
Ground clearance mm (ft.in) 540 (1'9")
PERFORMANCE
Travel speed km/h (MPH) 0-3.2 (2.0)
Working speed m/min (MPH) 0-10 (0.4)
Max. drawbar pull kg (lb) 12000 (26,455)
Gradeability deg 20
ENGINE
Model Komatsu SA6D140E
Type Direct injection, turbocharged
No. of cylinders-bore × stroke mm (in) 6-140 × 165 (5.51 × 6.50)
Horsepower HP (kW) 355 (265)
ROTOR EQUIPMENT
Drive method Hydrostatic
Rotor speed rpm 0-130
No. of cutting bits 60
REFILLING CAPACITY
Fuel ltr. (U.S. Gal) 500 (132.1)
Hydraulic oil ltr. (U.S. Gal) 300 (79.3)
CS360-2 ATTACHMENTS AND OPTIONAL EQUIPMENT
• Steel cab
• 700 mm (27.6") triple grouser shoes
• 860 mm (34") swamp shoes
5C-6
CONTENTS
INDEX
SECTION 6
BACKHOE LOADERS
CONTENTS
Features .......................................................................6-2
Specifications ..............................................................6-3
Dimensions ..................................................................6-4
6-1
Features BACKHOE LOADERS
Superior lift capacities and breakout A high steering angle combined with
forces excellent maneuverability result in
• Komatsu's superior lift capacities and breakout fast cycle times for the operator.
forces are achieved exclusively through the
HydrauMind hydraulic system.
• The front loader has superb breakout forces and Komatsu's backhoe loaders are
lift capacity due in part to the unique design of the equipped with Power Shuttle
loader.
transmissions and "Power shift"
inverters.
Komatsu's ergonomic innovations
create the perfect operating
environment. Komatsu's Electronic Gear
Management (EGM) system allows
• We ergonomically designed the controls
offering ease of operation, using a hydraulic the operator to utilize the Powershift
system that responds smoothly and precisely. transmission in either manual or
• The cab allows for all-around visibility and is automatic mode.
extremely quiet.
The Komatsu Powershift transmission has been
• The ergonomically designed suspension seat designed to safely allow the operator to perform
is very comfortable and fully adjustable. all functions efficiently. In addition to offering two
modes of operation, the Powershift comes
standard with:
Multi-function loader control lever's
• Self diagnostics system
cutting edge design allows for
• Anti-theft system
fingertip operation of all key loader • Engagement and automatic disengagement of
functions. four wheel drive
• Transmission disconnect • Kick down switch
• Auxiliary hydraulic control
• Rear differential lock
• Hydraulic speed up function
• Kick down (PS version only)
6-2
Specifications BACKHOE LOADERS
Model
WB70A-1 WB93R-5 WB93S-5 WB97R-5
Item
OPERATING WEIGHT* kg (lb) 5650 (12,460) 7460 (16,450) 8050 (17,750) 7560 (16,670)
HORSEPOWER:
SAE kW (HP)/rpm 52 (70.8)/2500 74 (99.2)/2200 74 (99.2)/2200 74 (99.2)/2200
LOADER BUCKET CAPACITY* m3 (cu.yd) 0.7 (0.92) 1.03 (1.35) 1.10 (1.43) 1.03 (1.35)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward Working 1st 4.7 (2.9) 6 (3.7) 6 (3.7) 6.5 (4.0)
2nd 10.5 (6.5) 10 (6.2) 10 (6.2) 11 (6.8)
Travel 3rd 18 (11) 23 (14) 23 (14) 23 (14)
4th 39 (24) 40 (25) 40 (25) 40 (25)
Reverse Working 1st 4.7 (2.9) 6 (3.7) 6 (3.7) 6.5 (4.0)
2nd 10.5 (6.5) 10 (6.2) 10 (6.2) 11 (6.8)
Travel 3rd 18 (11) 23 (14) 23 (14) 23 (14)
4th 39 (24) 40 (25) 40 (25) 40 (25)
Turning radius* mm (ft.in) 4380 (14'4") 4950 (16'3") 4770 (15'8") 4950 (16'3")
(Outside corner of bucket)
DIMENSIONS*:
Overall length*** mm (ft.in) 5270 (17'3") 5895 (19'4") 5895 (19'4") 5895 (19'4")
Overall width mm (ft.in) 1850 (6'1") 2320 (7'7") 2320 (7'7") 2320 (7'7")
Overall height** mm (ft.in) 2660 (8'9") 3710 (12'2") 3710 (12'2") 3710 (12'2")
Wheelbase mm (ft.in) 2150 (7'1") 2175 (7'2") 2215 (7'3") 2175 (7'2")
Treads (front) mm (ft.in) 1490 (4'10") 1934 (6'4") 1934 (6'4") 1934 (6'4")
Treads (rear) mm (ft.in) 1490 (4'10") 1800 (5'11") 1800 (5'11") 1800 (5'11")
Articulation angle (each) degree 40 — — —
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
No. of cylinders- 4D98E-1FA S4D104E-3 S4D104E-3 S4D104E-3
bore × stroke mm (in) 4-98 × 110 4-104 × 132 4-104 × 132 4-104 × 132
(3.9 × 4.3) (4.1 × 5.2) (4.1 × 5.2) (4.1 × 5.2)
Piston displacement ltr. (cu.in) 3.32 (203) 4.485 (274) 4.485 (274) 4.485 (274)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 70 (18.5) 150 (39.6) 150 (39.6) 150 (39.6)
Model
WB97S-5 WB140-2N WB150-2N WB140PS-2N
Item
OPERATING WEIGHT* kg (lb) 8150 (17,970) 7525 (16,600)
HORSEPOWER:
SAE kW (HP)/rpm 74 (99.2)/2200 65.1 (87)/2200 70.1 (94)/2200 65.1 (87)/2200
LOADER BUCKET CAPACITY* m3 (cu.yd) 1.10 (1.43) 0.95 (1.25) 0.95 (1.25) 0.95 (1.25)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward Working 1st 6.5 (4.0) 6.3 (3.9) 6.3 (3.9) 6.5 (4.0)
2nd 11 (6.8) 11.4 (7.1) 11.4 (7.1) 12.0 (7.5)
Travel 3rd 23 (14) 21.3 (13.2) 21.3 (13.2) 23.0 (14.3)
4th 40 (25) 37.8 (23.5) 37.8 (23.5) 40.0 (24.9)
Reverse Working 1st 6.5 (4.0) 6.3 (3.9) 6.3 (3.9) 6.35 (4.0)
2nd 11 (6.8) 11.4 (7.1) 11.4 (7.1) 12.0 (7.5)
Travel 3rd 23 (14) 21.3 (13.2) 21.3 (13.2) 23.0 (14.3)
4th 40 (25) 37.8 (23.5) 37.8 (23.5) —
Turning radius* mm (ft.in) 4770 (15'8")
(Outside corner of bucket)
DIMENSIONS*:
Overall length*** mm (ft.in) 5895 (19'4") 7310 (24'0") 7310 (24'0") 7310 (24'0")
Overall width mm (ft.in) 2320 (7'7") 2355 (7'9") 2355 (7'9") 2355 (7'9")
Overall height** mm (ft.in) 3710 (12'2") 2750 (9'0") 2750 (9'0") 2750 (9'0")
Wheelbase mm (ft.in) 2215 (7'3") 2175 (7'2") 2175 (7'2") 2175 (7'2")
Treads (front) mm (ft.in) 1934 (6'4") 1890 (6'2") 1890 (6'2") 1890 (6'2")
Treads (rear) mm (ft.in) 1800 (5'11") 1800 (5'11") 1800 (5'11") 1800 (5'11")
Articulation angle (each) degree —
ENGINE:
KOMATSU KOMATSU KOMATSU KOMATSU
No. of cylinders- S4D106-2SFA S4D106-2XFH S4D106-2SFA S4D106-2XFH
bore × stroke mm (in) 4-106 × 125 4-106 × 125 4-106 × 125 4-106 × 125
(4.2 × 4.9) (4.2 × 4.9) (4.2 × 4.9) (4.2 × 4.9)
Piston displacement ltr. (cu.in) 4.41 (269) 4.41 (269) 4.41 (269) 4.41 (269)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 130 (34.3) 130 (34.3) 130 (34.3) 130 (34.3)
* With standard tires and bucket
** Height to top of the cab
*** Transport length
6-3
Dimensions BACKHOE LOADERS
Model
WB150PS-2N WB150WS-2
Item
OPERATING WEIGHT* kg (lb) 8950 (19,730)
HORSEPOWER:
SAE kW (HP)/rpm 70.1 (94)/2200 70.1 (94)/2200
LOADER BUCKET CAPACITY* m3 (cu.yd) 0.95 (1.25) 1.15 (1.50)
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward Working 1st 6.5 (4.0) 6.5 (4.0)
2nd 12.0 (7.5) 12.0 (7.5)
Travel 3rd 23.0 (14.3) 23.0 (14.3)
4th 40.0 (24.9) 40.0 (24.9)
Reverse Working 1st 6.35 (4.0) 6.35 (4.0)
2nd 12.0 (7.5) 12.0 (7.5)
Travel 3rd 23.0 (14.3) 23.0 (14.3)
4th — —
Turning radius* mm (ft.in) 4700 (15'5")
(Outside corner of bucket)
DIMENSIONS*:
Overall length*** mm (ft.in) 7310 (24'0") 7255 (23'10")
Overall width mm (ft.in) 2355 (7'9") 2455 (8'1")
Overall height** mm (ft.in) 2750 (9'0") 2875 (9'5")
Wheelbase mm (ft.in) 2175 (7'2") 2175 (7'2")
Treads (front) mm (ft.in) 1890 (6'2") 1950 (6'5")
Treads (rear) mm (ft.in) 1800 (5'11") 1950 (6'5")
Articulation angle (each) degree —
ENGINE:
Model KOMATSU KOMATSU
No. of cylinders- S4D106-2SFH S4D106-2SFH
bore × stroke mm (in) 4-106 × 125 4-106 × 125
(4.2 × 4.9) (4.2 × 4.9)
Piston displacement ltr. (cu.in) 4.41 (269) 4.41 (269)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 130 (34.3) 130 (34.3)
6-4
Dimensions BACKHOE LOADERS
BB
AA
J K
X
Y
W
DD
CC
F
U
A
H S'
C
T
D
N'
B
L M N
O
V
Q
R
FVBH0332
A B C D E F G H I L M N
mm mm mm mm deg. deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
3885 110 3125 2480 46 40 44 870 440 1650 2150 1470
WB70A-1
(12'9") (4.3") (10'3") (8'2") (2'10") (1'5") (5'5") (7'1") (4'10")
6-5
Dimensions BACKHOE LOADERS
Q
M
O
F
E
A
N
B
BB
C
D
G
J
I K L
H
P
S
T
R
X
Y
U
V
Z W
FVBH0330
A B BB C D E F G H I J K L
mm mm mm mm mm mm deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
4290 3375 3175 2750 2720 750 45 45 130 1930 430 2175 1320
WB93R-5
(14'1") (11'1") (10'5") (9') (8'11") (2'6") (5.1") (6'4") (1'5") (7'2") (4'4")
4290 3375 3175 2750 2720 700 45 45 130 1930 470 2215 1320
WB93S-5
(14'1") (11'1") (10'5") (9'0") (8'11") (2'4") (5.1") (6'4") (1'7") (7'3") (4'4")
4290 3375 3175 2750 2720 750 45 45 130 1930 400 2175 1320
WB97R-5
(14'1") (11'1") (10'5") (9') (8'11") (2'6") (5.1") (6'4") (1'4") (7'2") (4'4")
4290 3375 3175 2830 2720 700 45 45 130 1930 440 2215 1320
WB97S-5
(14'1") (11'1") (10'5") (9'3") (8'11") (2'4") (5.1") (6'4") (1'5") (7'3") (4'4")
M N O P Q R S T U V W X Y Z
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
5895 3760 5800 4540 2830 5750 5020 2320 1800 1934 2320 3710 1080 1240
WB93R-5
(19'4") (12'4") (19'0") (14'11") (9'3") (18'10") (16'6") (7'7") (5'11") (6'4") (7'7") (12'2") (3'7") (4'1")
5895 3760 5800 4540 2830 5750 5020 2320 1800 1934 2320 3710 605 1240
WB93S-5
(19'4") (12'4") (19'0") (14'11") (9'3") (18'10") (16'6") (7'7") (5'11") (6'4") (7'7") (12'2") (2'0") (4'1")
5895 3760 6015 4840 3045 6035 5290 2320 1800 1934 2320 3710 605 1240
WB97R-5
(19'4") (12'4") (19'9") (15'11") (10'0") (19'10") (17'4") (7'7") (5'11") (6'4") (7'7") (12'2") (2'0") (4'1")
5895 3760 6015 4840 3045 6035 5290 2320 1800 1934 2320 3710 605 1240
WB97S-5
(19'4") (12'4") (19'9") (15'11") (10'0") (19'10") (17'4") (7'7") (5'11") (6'4") (7'7") (12'2") (2'0") (4'1")
6-6
Dimensions BACKHOE LOADERS
Q
M
O
A
E
B
N
C
D
G
J
H
I K L
P
S
X
U
T
V R
W
FVBH0331
A B C D E F G H I J K L
mm mm mm mm mm deg. deg. mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
WB140-2N
4185 3365 2750 2750 670 45 45 90 2080 320 2175 1175
WB140SP
(13'9") (11'0") (9') (9') (2'2") (3.5") (6'10") (1'1") (7'2") (3'10)
-2N
WB150-2N
4185 3365 2750 2750 670 45 45 90 2080 320 2175 1175
WB150SP
(13'9") (11'0") (9') (9') (2'2") (3.5") (6'10") (1'1") (7'2") (3'10)
-2N
WB150AW 4220 3400 2875 2730 610 45 45 100 2150 430 2175 1175
S-2N (13'10") (11'2") (9'5") (8'11") (2'0") (3.9") (7'1") (1'5") (7'2") (3'10)
M N O P Q R S T U V W X
mm mm mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
WB140-2N
7310 3490 4930 4420 2860 5520 5590 2750 1800 1890 2355 3550
WB140SP
(24'0") (11'5") (16'2") (14'6") (9'5") (18'1") (18'4") (9') (5'11") (6'2") (7'9") (11'8")
-2N
WB150-2N
7310 3710 5155 4725 3100 5715 5590 2750 1800 1890 2355 3550
WB150SP
(24'0") (12'2") (16'11") (15'5") (10'2") (18'9") (18'4") (9') (5'11") (6'2") (7'9") (11'8")
-2N
WB150AW 7255 4060 5500 4490 3100 5800 5325 2900 1950 1950 2455 3600
S-2N (23'10") (13'4") (18'1") (14'9") (10'2") (19'0") (17'6") (9'6") (6'5") (6'5") (8'1") (11'10")
6-7
MEMO
CONTENTS
INDEX
SECTION 7
SKID STEER LOADERS Sec 7A
COMPACT TRACK LOADERS Sec 7B
SECTION 7A
SKID STEER LOADERS
CONTENTS
Features .................................................................... 7A-2
Specifications ........................................................... 7A-3
Dimensions ............................................................... 7A-5
7A-1
Features SKID STEER LOADERS
• Versatility
The foot accelerator ensures greater control over
power during operation.
Ready for use with any equipment, the base
version features an auxiliary hydraulic circuit with
proportional control.
7A-2
Specifications SKID STEER LOADERS
Model
SK04J-2 SK510-5 SK714-5 SK815-5
Item
OPERATING WEIGHT* kg (lb) 1550 (3,420) 1855 (4,090) 2530 (5,580) 2630 (5,800)
HORSEPOWER:
SAE kW (HP)/rpm 15.5 (20.8)/2800 22.5 (30.6)/2800 34.7 (47.2)/2800 34.7 (47.2)/2800
BUCKET CAPACITY* m3 (cu.yd) 0.16 (0.21) 0.23 (0.30) 0.35 (0.46) 0.4 (0.52)
PERFORMANCE:
Rated operating capacity kg (lb) 390 (860) 455 (1,000) 650 (1,430) 700 (1,540)
Tipping load kg (lb) 780 (1,720) 910 (2,010) 1300 (2,870) 1400 (3,090)
Travel speeds: km/h (MPH)
Forward Working 9 (5.6) 10 (6.2) 10.5 (6.5) 10.5 (6.5)
Trave 16 (9.9) 16 (9.9)
Reverse Working 9 (5.6) 10 (6.2) 10.5 (6.5) 10.5 (6.5)
Travel 16 (9.9) 16 (9.9)
Turning radius* mm (ft.in) 1465 (4'10'') 1697 (5'7") 2100 (6'11") 2150 (7'11")
(Outside corner of bucket)
DIMENSIONS*:
Overall length mm (ft.in) 2570 (8'5") 2917 (9'7") 3200 (10'6") 3350 (11'0")
Overall width mm (ft.in) 1080 (3'7") 1260 (4'2") 1550 (5'1") 1730 (5'8")
Overall height** mm (ft.in) 1860 (5'6") 1924 (6'4") 1960 (6'5") 1960 (6'5")
Wheelbase mm (ft.in) 740 (2'5") 823 (2'8") 950 (3'1") 1050 (3'5")
Treads (front and rear) mm (ft.in) 820 (2'8") 1010 (3'4") 1250 (4'1") 1380 (4'6")
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
3D74E 3D84E 4D88E 4D88E
No. of cylinders- mm (in) 3-74 × 78 3-84 × 86 3-88 × 90 3-88 × 90
bore × stroke (2.9 × 3.1) (3.3 × 3.4) (3.5 × 3.5) (3.5 × 3.5)
Piston displacement ltr. (cu.in) 1.01 (62) 1.43 (87) 2.19 (134) 2.19 (134)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 27 (7.1) 38.5 (10.2) 53 (14.0) 53 (14.0)
Model
SK818-5 SK820-5 SK1020-5 SK1020-5***
Item
OPERATING WEIGHT* kg (lb) 2910 (6,415) 2940 (6,480) 3420 (7,540) 3435 (7,573)
HORSEPOWER:
SAE kW (HP)/rpm 34.7 (47.2)/2800 38.9 (52.2)/2800 51.1 (69.5)/2500 52.2 (70)/2500
BUCKET CAPACITY* m3 (cu.yd) 0.4 (0.52) 0.4 (0.52) 0.45 (0.59) 0.47 (0.61)
PERFORMANCE:
Rated operating capacity kg (lb) 870 (1,920) 900 (1,980) 905 (2,000) 907 (2,000)
Tipping load kg (lb) 1740 (3,840) 1800 (3,970) 1810 (3,990) 1814 (4,000)
Travel speeds: km/h (MPH)
Forward Working 10 (6.2) 10.5 (6.5) 10 (6.2) 10 (6.2)
Travel 16 (9.9) 16 (9.9) 16 (9.9) 16 (10)
Reverse Working 10 (6.2) 10.5 (6.5) 10 (6.2) 10 (6.2)
Travel 16 (9.9) 16 (9.9) 16 (9.9) 16 (10)
Turning radius* mm (ft.in) 2150 (7') 2015 (6'7") 2155 (7') 2265 (7'5")
(Outside corner of bucket)
DIMENSIONS*:
Overall length mm (ft.in) 3350 (11'0") 3350 (11'0") 3550 (11'8") 3680 (12'1")
Overall width mm (ft.in) 1730 (5'8") 1730 (5'8") 1880 (6'2") 1880 (6'2")
Overall height** mm (ft.in) 2000 (6'7") 2000 (6'7") 2080 (6'10") 2080 (6'10")
Wheelbase mm (ft.in) 1050 (3'5") 1050 (3'5") 1160 (3'10") 1160 (3'10")
Treads (front and rear) mm (ft.in) 1385 (4'7") 1385 (4'7") 1500 (4'11") 1500 (4'11")
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
4D88E S4D84E 4D98E 4D98E
No. of cylinders- mm (in) 4-88 × 90 4-84 × 90 4-98 × 110 4-98 × 110
bore × stroke (3.46 × 3.54) (3.31 × 3.54) (3.85 × 4.33) (3.85 × 4.33)
Piston displacement ltr. (cu.in) 2.19 (133.6) 2.0 (122) 3.32 (203) 3.32 (203)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 47 (12.4) 53 (14.0) 73 (19.3) 73 (19.3)
7A-3
Specifications SKID STEER LOADERS
Model
SK1026-5
Item
OPERATING WEIGHT* kg (lb) 3600 (7,940)
HORSEPOWER:
SAE kW (HP)/rpm 62 (83)/2500
BUCKET CAPACITY* m3 (cu.yd) 0.45 (0.59)
PERFORMANCE:
Rated operating capacity kg (lb) 1200 (2,650)
Tipping load kg (lb) 2400 (5,290)
Travel speeds: km/h (MPH)
Forward Working
Travel 16 (9.9)
Reverse Working
Travel 16 (9.9)
Turning radius* mm (ft.in) 2000 (6'7")
(Outside corner of bucket)
DIMENSIONS*:
Overall length mm (ft.in) 3550 (11'8")
Overall width mm (ft.in) 1880 (6'2")
Overall height** mm (ft.in) 2085 (6'10")
Wheelbase mm (ft.in) 1160 (3'10")
Treads (front and rear) mm (ft.in) 1530 (5'0")
ENGINE:
Model KOMATSU
4D98E
No. of cylinders- mm (in) 4-98 × 110
bore × stroke (3.85 × 4.33)
Piston displacement ltr. (cu.in) 3.32 (203)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 73 (19.3)
7A-4
Dimensions SKID STEER LOADERS
Q M
N
K
J
L
G F E
H C
P D
A
B FVBH0216
Model
SK818-5 SK820-5 SK1020-5 SK1020-5**
Item
A: Wheel base mm (ft.in) 1050 (3'5") 1050 (3'5") 1160 (3'9") 1160 (3'9")
B: Overall length mm (ft.in) 3350 (11') 3480 (11'5") 3550 (11'7") 3680 (12'1")
C: Overall height mm (ft.in) 2000 (6'6") 2001 (6'7") 2080 (6'10") 2080 (6'10")
D: Ground clearance mm (in) 210 (8.26") 210 (8.26") 240 (9.44") 210 (8.27")
E: Width over tires mm (ft.in) 1660 (5'5") 1658 (5'5") 1840 (6') 1830 (6'0")
F : Tread mm (ft.in) 1385 (4'5") 1383 (4'6") 1500 (4'9") 1500 (4'9")
G: Bucket width mm (ft.in) 1730 (5'7") 1730 (5'8") 1880 (6'2") 1880 (6'2")
H: Dumping clearance, max. height mm (ft.in) 2280 (7'5") 2190 (7'2") 2390 (7'10") 2300 (7'7")
J : Reach at max. height mm (ft.in) 775 (2'6") 660 (2'2") 590 (2') 690 (2'3")
K: Operating height (fully raised) mm (ft.in) 3820 (12'6") 3910 (12'10") 3965 (13') 4100 (13'5")
L : Hinge pin height, max. height mm (ft.in) 3000 (9'10") 3000 (9'10") 3100 (10'1") 3100 (10'2")
M: Turning radius at bucket corner mm (ft.in) 2015 (6'7") 2016 (6'7") 2150 (7') 2265 (7'5")
N: Turning radius at rear tail corner mm (ft.in) 1665 (5'5") 1667 (5'6") 1650 (5'5") 1650 (5'5")
P: Tilt back angle, carry position degree 30 30 33 30
Q: Dump angle, max. height degree 45 45 41 45
* Narrow version
** USA source
7A-5
Dimensions SKID STEER LOADERS
Model
SK1026-5
Item
A: Wheel base mm (ft.in) 1162 (3'10")
B: Overall length mm (ft.in) 3547 (11'8")
C: Overall height mm (ft.in) 2082 (6'10")
D: Ground clearance mm (in) 237 (9.33")
E: Width over tires mm (ft.in) 1836 (6'0")
F : Tread mm (ft.in) 1530 (5'0")
G: Bucket width mm (ft.in) 1880 (6'2")
H: Dumping clearance, max. height mm (ft.in) 2554 (8'5")
J : Reach at max. height mm (ft.in) 842 (2'9")
K: Operating height (fully raised) mm (ft.in) 4115 (13'6")
L : Hinge pin height, max. height mm (ft.in) 3261 (10'8")
M: Turning radius at bucket corner mm (ft.in) 1998 (6'7")
N: Turning radius at rear tail corner mm (ft.in) 1998 (6'7")
P: Tilt back angle, carry position degree 28.6
Q: Dump angle, max. height degree 40.4
7A-6
SECTION 7B
COMPACT TRACK
LOADERS
CONTENTS
Features .................................................................... 7B-2
Specifications ........................................................... 7B-3
Dimensions ............................................................... 7B-4
7B-1
Features COMPACT TRACK LOADERS
• The Tracks
The tracks ensure exceptional stability and
traction force on all types of soil. The wide base
gives excellent stability to the machine and
strongly reduces vibrations and increases
operator comfort. The hard steel ensures high
resistance to all parts which are most subject to
wear, such as gears, rollers and idlers. At the
same time, a bigger section and multiple rubber
covered steel reinforcements ensure extended
duration to the shoes.
7B-2
Specifications COMPACT TRACK LOADERS
Model
CK20-1 CK25-1 CK30-1 CK35-1
Item
OPERATING WEIGHT* kg (lb) 3750 (7,870) 3820 (8,420) 4290 (9,460) 4560 (10,050)
HORSEPOWER:
SAE kW (HP)/rpm 51.8 (69.5)/2500 51.8 (69.5)/2500 62 (84)/2500 62 (84)/2500
BUCKET CAPACITY* m3 (cu.yd) 0.4 (0.52) 0.4 (0.52) 0.45 (0.59) 0.45 (0.59)
PERFORMANCE:
Rated operating capacity kg (lb) 930 (2,050) 1000 (2,200) 1130 (2,490) 1470 (3,240)
Tipping load kg (lb) 2660 (5,860) 2860 (6,310) 3220 (7,100) 4200 (9,260)
Travel speeds: km/h (MPH)
Forward Working
Trave 12.0 (7.5) 12.0 (7.5) 12.0 (7.5) 12.0 (7.5)
Reverse Working
Travel 12.0 (7.7) 12.0 (7.7) 12.0 (7.7) 12.0 (7.7)
Turning radius* mm (ft.in) 2100 (6'11") 2100 (6'11") 2255 (7'5") 2255 (7'5")
(Outside corner of bucket) 0.37 (5.26) 0.37 (5.26) 0.32 (4.55) 0.32 (4.55)
DIMENSIONS*:
Overall length mm (ft.in) 3375 (11'1") 3375 (11'1") 3550 (11'8") 3550 (11'8")
Overall width mm (ft.in) 1670 (5'6") 1670 (5'6") 1990 (6'6") 1990 (6'6")
Overall height** mm (ft.in) 2070 (6'10") 2070 (6'10") 2130 (7'0") 2130 (7'0")
Length of track on ground mm (ft.in) 1450 (4'9") 1450 (4'9") 1610 (5'3") 1610 (5'3")
Track gauge mm (ft.in) 1350 (4'5") 1350 (4'5") 1540 (5'1") 1540 (5'1")
Shoe width mm (in) 320 (12.6) 320 (12.6) 450 (17.7) 450 (17.7)
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
4D98E-2 4D98E-2 S4D98E-2 S4D98E-2
No. of cylinders- mm (in) 4-98 × 110 4-98 × 110 4-98 × 110 4-98 × 110
bore × stroke (3.85 × 4.33) (3.85 × 4.33) (3.85 × 4.33) (3.85 × 4.33)
Piston displacement ltr. (cu.in) 3.32 (203) 3.32 (203) 3.32 (203) 3.32 (203)
CAPACITY:
Fuel tank ltr. (U.S. Gal) 64 (16.9) 64 (16.9) 73 (19.3) 73 (19.3)
* With standard shoe and bucket
** Height to top of the cab
7B-3
Dimensions COMPACT TRACK LOADERS
K
N
P
M
H
J L
G F E C
Q
D
A
B
7B-4
CONTENTS
INDEX
SECTION 8
MOBILE CRUSHERS Sec 8A
& RECYCLERS
MOBILE WOOD TUB GRINDERS Sec 8B
MOBILE SOIL RECYCLERS Sec 8C
SECTION 8A
MOBILE CRUSHERS
& RECYCLERS
CONTENTS
Benefits ..................................................................... 8A-2
Features .................................................................... 8A-3
Type of crushers/recyclers ...................................... 8A-4
Model and application ............................................. 8A-5
Specifications ........................................................... 8A-6
Dimensions ............................................................... 8A-7
Productivity .............................................................. 8A-8
8A-1
Benefits MOBILE CRUSHERS
& RECYCLERS
Benefits Of Mobile Crusher & Recycler
1. Demolished wasted material (concrete, asphalt, brick, etc.) can be re-used effectively.
2. As the wasted material can be utilized again, the cost for purchasing new material can be saved.
3. The cost for hauling and dumping (of the wasted material) with trucks can be minimized.
4. Even when the processed material should be used outside, the transportation cost can be much saved.
(because of the compactness of the material)
5. The elimination of the trucking also offers less generation of the exhaust gas.
6. The machine can be used whenever and wherever you like because of its mobility.
Hydraulic excavator
Machine-mounted type
magnetic separator
Undersized
material
Oversized
material
Vibrating screen
Wheel loader
Truck
8A-2
Features MOBILE CRUSHERS
& RECYCLERS
Jaw crusher, with superior crushing force and reliability, is installed.
(BR100JG, BR380JG, BR550JG)
• Natural rock, concrete, asphalt concrete, etc., can be crushed with strong force.
Impact crusher can perform fine crushing and produce round final product.
(BR480RG)
• Asphalt concrete, concrete debris, bricks, some natural stone., etc can be crushed.
Easy transportation and superb maneuverability
• Compact crawler undercarriage is adopted, facilitating job site access/exit.
Semi-Automatic Material Feeding Control is installed
• The Komatsu original controller optimizes material feeding amount to the crusher.
• Plate feeder with speed controller keeps the operation of crusher uniform and stabilized. Thus, unmanned
operation is possible.
(BR100JG, BR380JG, BR550JG, BR480RG)
Simple control and easy operation
• Raising/lowering of belt conveyor and removal of foreign materials are easy.
Crushing work is facilitated by preventive functions of macadam accumulation and debris clogging.
(BR100JG, BR380JG, BR550JG, BR480RG)
Options for more effective system
• Ample powered hydraulic-driven optional equipment is available, such as a magnetic separator (chassis
mounted), vibratory screen and secondary/tertiary belt conveyors etc., to provide an effective system.
Low-noise and low vibration design
• Low-noise type engine; sound absorbing material; low-speed high-torque type hydraulic pump;
soundproof muffler, etc., are adopted. Thus, overall noise level is low.
Highly reliable hydraulic drive system
• Crusher, feeder and belt conveyor are driven respectively by independent hydraulic pumps, assuring high
reliability and easy maintenance.
8A-3
Type of Crushers/Recyclers MOBILE CRUSHERS
& RECYCLERS
Komatsu mobile crushers are classified into 3 types.
The jaw crusher can crush large blocks and is suitable for crushing concrete debris and natural stone. It has
a swing jaw plate and fixed jaw plate. Those jaw plates crunch material.
The impact crusher is used for secondary crushing and granulation of asphalt, concrete debris, and natural
stone. It produces round grains in many cases and is suitable for production of relatively fine grains. The
blocks put in the impact crusher are thrown in the tangential direction by the blow bar of the rotor which is
rotating at high speed and are crushed by collision with the impact plate. They are also crushed by collision
with each other.
The shear shreds industrial waste as well as bulky domestic refuse to reduce its volume, thereby contributing
to extending the service life of disposal sites.
[JAW CRUSHER]
Material to be crushed Swing
Vibratory grizzly jaw plate
Feed-in bar(2 stage)
hopper Fixed Crusher Primary belt conveyor
jaw plate motor Magnetic separator motor
Vibratory grizzly
feeder
Vibrator
Primary Primary
belt conveyor belt conveyor FKZ00163E
lift cylinder Muck
removing chute
[IMPACT CRUSHER]
Material to be crushed
Grizzly bars(2 stage) Impact plates
Hopper
Magnetic separator (Optional)
Vibratory grizzly
feeder
Vibrator Primary belt conveyor
M-type chute
Blow bar
Rotor FVZM0560E
Piece cutters
(monolithic cutters)
FZBH0289
Dual-axis shear
8A-4
Model and Application MOBILE CRUSHERS
& RECYCLERS
8A-5
Specifications MOBILE CRUSHERS
& RECYCLERS
ENGINE: KOMATSU
Model SAA6D125E
No. of cylinders- mm 6-125× 150
bore × stroke (in) (4.92× 5.91)
Piston displacement ltr. (cu.in) 11.04 (674)
DIMENSIONS:
Overall length*4 14250 (46'9")
Overall height (transport) mm (ft.in) 3496 (11'6")
Overall width (transport) 2995 (9'10")
Length of track on ground 3655 (12")
Track gauge 2460 (8'1")
CAPACITY:
Fuel tank ltr. (U.S. Gal) 605 (160)
Hydraulic tank 370 (98)
Applicable base machine
(Engine/Undercarriage) PC400-6/PC200LC-7
8A-6
Dimensions MOBILE CRUSHERS
& RECYCLERS
H
C B
G
N F
M
L D E
K A
J
Unit: mm (ft.in)
BR100JG-2 BR380JG-1 BR550JG-1
8070 (26'6") 12500 (41'0") 13430 (44'1")
A
*8070 (26'6") *12500 (41'0") *13430 (44'1")
2700 (8'10") 3200 (10'6") 3640 (11'11")
B
*2515 (8'3") *3200 (10'6") *3395 (11'2")
C 2515 (8'3") 3200 (10'6") 3640 (11'11")
D 2115 (6'11") 3275 (10'9") 3700 (12'2")
E 3795 (12'5") 6080 (20'0") 6145 (20'2")
F 205 (8") 300 (12") 350 (1'2")
G 1500 (4'11") 2800 (9'2") 3000 (9'10")
H 2165 (7'1") 3700 (12'2") 4365 (14'4")
I 1840 (6') 2500 (8'2") 2805 (9'2")
2345 (7'8") — 3115 (10'3")
J
*2200 (7'3") — *2995 (9'10")
K 2100 (6'11") 2815 (9'3") 2980 (9'9")
L 1700 (5'7") 2280 (7'6") 2480 (8'2")
M 600 (24") 1050 (41.3") 1050 (41.3")
N 400 (16") 500 (20") 500 (20")
* at transportation
H
I M J
B
C G
N F D E
L A
K
Unit: mm (ft.in)
BR480RG-1
14250 (46'9")
A
*14250 (46'9")
4120 (13'6")
B
*3496 (11'6")
C 3470 (11'5")
D 3655 (12')
E 6530 (21'5")
F 285 (11")
G 3000 (9'10")
H 4390 (14'5")
I 2990 (9'10")
2995 (9'10")
J
*2995 (9'10")
K 2960 (9'9")
L 2460 (8'1")
M 1200 (47.2")
N 500 (20")
* at transportation
8A-7
MOBILE CRUSHERS
Productivity & RECYCLERS
Calculation of the production capacity of a mobile crusher varies largely with the type of the crusher,
properties of supplied material and rocks, quantity of muck in the material, clearance of discharge setting,
rotation speed of the crusher, and size of the products required by the customer, etc.
The following are the basic elements for calculation of production capacity of each crusher.
Relationship between elements for calculation of production capacity of jaw
crusher
Production capacity Large > Small Remarks
Clearance of discharge setting Wide Narrow
Hardness of material Soft Hard Hard material may crush easily
Ratio of muck in material (in crusher) Low High
Wetness of material Dry Wet
Impurities in material Less Many
Efficiency becomes highest when supply rate is 60 – 70% of
Supply rate in crusher – High
volume of crusher.
Size of material Small Large
* When recommending production capacity, confirm the properties of the rock samples from the customer's quarry by
crushing them actually.
* Basically, the production capacity and size of produced grains are decided by the quantity, size, and hardness of the
material, clearance between the blow bar and impact plate, and rotor speed. Since the production capacity is in inverse
proportion to the size of the produced grains, adjust the changeable elements of the machine, feed rate, rotor speed,
clearance between the blow bar and impact plate, etc., according to the type of the material and the grain size required by
the customer. Then, use a proper screen and put oversized material again.
* For the rough standard of the production capacity, see the catalogs and sales material for the mobile crusher.
* If the production capacity of a mobile crusher in a customer's jobsite is necessary, ask Komatsu.
8A-8
SECTION 8B
MOBILE WOOD
TUB GRINDERS
CONTENTS
Features .................................................................... 8B-2
Specifications ........................................................... 8B-3
Dimensions ............................................................... 8B-4
8B-1
Features MOBILE WOOD
TUB GRINDERS
• The scatter prevention guard ensures efficient grinding of tree roots, stumps and waste lumber.
• The hydraulic grind mill with its carbon grinder bits realizes a large output.
Inclined cover
Screen
Movable tub
Grind mill
Discharge conveyor belt
Magnetic
separator
(option)
8B-2
Specifications MOBILE WOOD
TUB GRINDERS
* Including conveyor
8B-3
Dimensions MOBILE WOOD
TUB GRINDERS
B
F
G.L E
I J
H D
G A
Unit: mm (ft.in)
BR120T-1
8520 (27'11")
A
*8330 (27'4")
2950 (9'8")
B
*2710 (8'11")
2790 (9'2")
C
*2440 (8')
D 2235 (7'4")
E 250 (10")
F 2575 (8'5")
G 2290 (7'6")
H 1840 (6'1")
I 700 (28")
J 450 (18")
* at transportation
8B-4
SECTION 8C
MOBILE SOIL
RECYCLERS
CONTENTS
Features .................................................................... 8C-2
Specifications ........................................................... 8C-3
Dimensions ............................................................... 8C-4
8C-1
Features MOBILE SOIL
RECYCLERS
• Waste soil in the course of various construction job site can be processed on site, allowing the soil to be
recycled.
• Costs for waste soil disposing, new materials and transportation can be greatly reduced by on site
recycling.
8C-2
Specifications MOBILE SOIL
RECYCLERS
Model
BZ210
Item
OPERATING WEIGHT kg (lb) 20500 (45,190)
HORSEPOWER kW (HP)/RPM 107 (144)/1950
MIXER PERFORMANCE:
Processing capacity m3/h (cu.yd/h) 40 - 150 (52 -195)
Mixing method Soil cutter and triple rotary hammer
Row material soil hopper volume m (cu.yd)
3
2.0 (2.4)
Max. material size mm (in) 200 (7'9")
Solidifying material hopper capacity m3 (cu.yd) 3.0 (3.9)
Solidifying material feed adjustment range kg/m3 (lb/cu.yd) 9 - 400 (15 - 674)
ENGINE: KOMATSU
Model SAA6D102E
No. of cylinder- bore × stroke mm 6-102 × 120
(in) (4.02 × 4.72)
Piston displacement ltr. (cu.in) 5.88 (359)
DIMENSIONS:
Overall length* 13210 (43'4")
Overall height (transport) 4560 (15'0")
mm (ft.in)
Overall width (transport) 2850 (9'4')
Length of track on ground 2750 (9')
Track gauge 2350 (7'9')
CAPACITY:
Fuel tank ltr. (U.S. Gal) 400 (107)
Hydraulic tank 240 (63)
* Including conveyer
8C-3
Dimensions MOBILE SOIL
RECYCLERS
2400(7'10")
( )
2700(8'10")
)
3510(11'6")
)
(
(
2900((9'6")
4560(15')
4385(14'5")
)
(During transport)
(During transport)
3100(10'2"))
(
3250(10'8"))
2450(8')
( )
(
(
1600(5'3")
( )
(Under the rubber chute)
Ground clearance
c
300(1') 6860(22'6")
( )
900(2'11
900(2'11")
0 13210(43'4")
( )
500(20")
2350(7'9")
( )
2850(9'4")
( )
(Durring trasport) FVBH0225
8C-4
CONTENTS
INDEX
SECTION 9
TELESCOPIC HANDLERS
CONTENTS
Features .......................................................................9-2
Specifications ..............................................................9-3
Dimensions ..................................................................9-4
Load charts ..................................................................9-5
9-1
Features TELESCOPIC HANDLERS
9-2
Specifcations TELESCOPIC HANDLERS
Item
WH713 WH714 WH714H WH716
Model
OPERATING WEIGHT* kg (lb) 10550 (23,260) 10620 (23,410) 11180 (24,650) 11590 (25,550)
HORSEPOWER (SAE) kW (HP)/rpm 74 (99.2)/2300 74 (99.2)/2300 74 (99.2)/2300 74 (99.2)/2300
PERFORMANCE:
Max. lifting height m (ft.in) 13.1 (43'0") 14.1 (46'3") 14.1 (46'3") 16.1 (52'10")
Max. lifting capacity kg (lb) 3700 (8,160) 4000 (8,820) 4500 (9,920) 4000 (8,820)
Capacity at max. height kg (lb)
On tires 3700 (8,160) 4000 (8,820) 4000 (8,820) 2500 (5,510)
On tires with frame leveling — — — —
Max. forward reach m (ft.in) 8.7 (28'7") 9.6 (31'6") 9.6 (31'6") 11.7 (38'5")
Capacity at max. forward reach kg (lb) 1460 (3,220) 1300 (2,870) 1350 (2,980) 1000 (2,200)
Breakout force (ISO 3813) kg (lb) 6880 (15,170) 6880 (15,170) 6880 (15,170) 6880 (15,170)
DIMENSIONS:
See the page of dimensions mm (ft.in)
ENGINE: KOMATSU KOMATSU KOMATSU KOMATSU
Model 4D104E 4D104E 4D104E 4D104E
Piston displacement ltr. (cu.in) 4,485 (274) 4,485 (274) 4,485 (274) 4,485 (274)
POWER TRAIN:
Drive (2W/4W) 4W 4W 4W 4W
Transmission type Power shift Power shift Power shift Power shift
Number of gears (F/R) 5/3 5/3 5/3 5/3
Max. travel speed km/h (MPH) 35 (21.7) 38 (23.6) 35 (21.7) 35 (21.7)
Steering type 2W/4W/Crab 2W/4W/Crab 2W/4W/Crab 2W/4W/Crab
Tires: Front 15.5/80-24-14PR 14.00-24-16PR 15.5/80-24-14PR 15.5/80-24-14PR
Rear 15.5/70-24-14PR 14.00-24-16PR 15.5/70-24-14PR 15.5/70-24-14PR
HYDRAULIC SYSTEM
Hydraulic pump Axial piston Axial piston Axial piston Axial piston
Max. oil flow ltr. (U.S.Gal)/min 142 (37.5) 142 (37.5) 142 (37.5) 142 (37.5)
Max. oil pressure kg/cm2 (PSI) 265 (3770) 265 (3770) 265 (3770) 265 (3770)
CAPACITY:
Fuel tank ltr. (U.S.Gal)/min 130 (34.3) 130 (34.3) 130 (34.3) 130 (34.3)
* With standard tires and fork
** With optional turbo engine
9-3
Dimensions TELESCOPIC HANDLERS
B
G
E D F I
A C
FV B H 0356
A B C D E F G H I J
mm mm mm mm mm mm mm mm mm mm
(ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in) (ft.in)
5525 2390 2370 3020 845 1660 1560 400 2005 960
WH609
(18'2") (7'10") (7'9") (9'11") (2'9") (5'5") (5'1") (1'4") (6'7") (3'2")
5700 2390 2370 3020 845 1835 1560 400 2005 960
WH613
(18'8") (7'10") (7'9") (9'11") (2'9") (6'0") (5'1") (1'4") (6'7") (3'2")
6170 2435 2370 3350 1100 1720 1630 430 2005 960
WH713
(20'3") (8'0") (7'9") (11'0") (3'7") (5'8") (5'4") (1'5") (6'7") (3'2")
6170 2450 2400 3350 1100 1720 1645 465 2005 960
WH714
(20'3") (8'0") (7'10") (11'0") (3'7") (5'8") (5'4") (1'6") (6'7") (3'2")
6170 2450 2400 3350 1100 1720 1645 465 2005 960
WH714H
(20'3") (8'0") (7'10") (11'0") (3'7") (5'8") (5'4") (1'6") (6'7") (3'2")
6865 2450 2400 3350 1100 2415 1645 465 2005 960
WH716
(22'6") (8'0") (7'10") (11'0") (3'7") (7'11") (5'4") (1'6") (6'7") (3'2")
9-4
Load Charts TELESCOPIC HANDLERS
WH609
WH613
On Stabilizers
9-5
Load Charts TELESCOPIC HANDLERS
WH713
WH714
On Stabilizers On Tires
9-6
Load Charts TELESCOPIC HANDLERS
WH714H
WH716
On Stabilizers On Tires
9-7
MEMO
CONTENTS
INDEX
SECTION 10
HARVESTERS Sec 10A
FORWARDERS Sec 10B
TRACK FELLER BUNCHERS Sec 10C
SECTION 10
FOREST MACHINES
CONTENTS
Forest Machines by Komatsu Forest ......................10-2
10-1
Forest Machines by Komatsu Forest FOREST MACHINES
Komatsu Forest AB is an international group with its head office and technology center in Umea, Sweden.
Komatsu Forest produces the Valmet brand of forestry machines and is one of the world's largest
manufacturers of forestry machines. Komatsu Forest has approximately 1,100 employees and is represented
on all markets where mechanized forestry is used. The company includes the two manufacturing units
Komatsu Forest AB Sweden and Komatsu Forest LLC USA. Komatsu Forest has its own sales companies in
Australia, Brazil, Finland, Norway, the United Kingdom, USA, Sweden and Germany. Komatsu Forest AB is
owned by the Japanese company Komatsu Ltd.
For more information about Komatsu Forest and Valmet products, visit: www.komatsuforest.com
10-2
SECTION 10A
HARVESTERS
CONTENTS
Features .................................................................. 10A-2
Specifications ......................................................... 10A-3
Dimensions ............................................................. 10A-4
Specifications & dimentions
Harvester head ................................................... 10A-5
Installation Kit for Valmet Harvester heads ........ 10A-7
10A-1
Features HARVESTERS
• Operator comfort
Leveling produces extremely operator-friendly cabs, where the operator is always sitting flat. This
consequently generates extraordinarily good ergonomics, which enable the driver to retain concentration
throughout the shift without becoming tired. The slewing cab and the side-mounted crane means that the
harvester head is always in focus and the visibility perfect. Low engine noise also contributes to the
excellent comfort.
• Easy maintenance
The machines are extremely operationally reliable, which minimize the stoppages. They are also easy to
maintain and just about all service work can be carried out from ground level. Daily service and
checkpoints are naturally easily accessable.
10A-2
Specifications HARVESTERS
Model
901.3 911.3 941
Item
OPERATING WEIGHT (approx.)
4WD kg (lb) 14490 (31,945) — —
6WD 15100 (33,290) 16300 (35,935) 23500 (51,800)
HORSEPOWER (DIN)
Gross kW (HP)/rpm 140 (188)/2200 170 (228)/1700 201 (273)/2000
PERFORMANCE:
Pulling power kN 128 133 190
kgf (lbf) 13050 (28,770) 13560 (29,890) 19370 (42,700)
Travel speed Hi km/h (MPH) 25 (15.5) 25 (15.5) 25 (15.5)
Lo 9 (5.6) 9 (5.6) 9 (5.6)
ENGINE: Sisu Diesel Sisu Diesel Sisu Diesel
Model 66CTA 74CTA 84CTA
Torque Nm/rmp 800/1500 1000/1500 1300/1500
HYDRAULIC SYSTEM:
Hydraulic pump Variable capacity Variable capacity Variable capacity
Max. flow Itr. (U.S.Gal)/min. 246 (65) 313 (82.7) 346 (91)
Working pressure kg/cm2 (PSI) 245 (3480) 260 (3700) 285 (4060)
CRANE (BOOM):
Model Valmet CRH 15/DT Valmet CRH 18/DT Valmet CRH 24
Reach with harvester head m (in) 10 – 11 10 – 11 10
(ft.in) (32’10" – 36’1") (32’10" – 36’1") (32’10")
Lifting moment, gross kNm (lbf ft) 156.5 (115,430) 186.0 (137,190) 273 (201,350)
Turning moment, gross kNm (lbf ft) 35.5 (26,180) 40.8 (30,090) 51 (37,620)
WHEEL & AXLES
Front 4W: 600/65 × 34 6W: 600/55 × 26.5 650/65 × 26.5
4W: 700/55 × 34 6W: 700/50 × 26.5
4W: 710/55 × 34 6W: 710/45 × 26.5
6W: 600/50 × 22.5
6W: 700/45 × 22.5
6W: 710/40 × 22.5
Rear 4W: 600/65 × 34 6W: 600/65 × 34 700/70 × 34
4W: 700/55 × 34 6W: 700/55 × 34
4W: 710/55 × 34 6W: 710/55 × 34
6W: 620/55 × 30.5
6W: 650/65 × 26.5
CAPACITY (Refilled)
Fuel tank Itr. (U.S. Gal) 370 (98) 370 (98) 550 (145)
Application Harvester Head Valmet 945.1 Valmet 350 Valmet 370.2
Valmet 330.2 Valmet 360.2
Valmet 350 Valmet 960
Valmet 945.1
10A-3
Dimensions HARVESTERS
D
E
B A
FVBH0365
D
E
B A
FVBH0366
B Width mm (ft.in) 2650 (8’8") 2650 (8’8") 2750 (9’0") – 2990 (9’10")
2900 (9’6")
C Height mm (ft.in) 3875 (12’9") 3815 (12’6") 3875 (12’9") 3965 (13’0")
D Ground clearance mm (ft.in) 640 (2’1") 580 (1’11") 640 (2’1") 650 (2’2")
E Wheel base mm (ft.in) 3300 (10’10") 3500 (11’6") 3500 (11’6") 4025 (13’2")
10A-4
Specifications & Dimensions HARVESTERS
Harvester head
Model
330.2 330.2DUO 350 360.2
Item
WEIGHT kg (lb) 685 (1,510) 750 (1,653) 950 (2,094) 1245 (2,745)
Incl. Topping saw
kN 15.5 15.5 16,5 - 25,3 25.3
Feed force (gross)
kgf 1580 1580 1680 - 2580 2580
(lbf) (3,485) (3,485) (3710 - 5,690)* (5,690)
Feed speed
m/s (ft/s) 0 - 4.5 (0 - 14.8) 0 - 4.5 (0 - 14.8) 0 - 5 (0 - 16.4) 0 - 5 (0 - 16.4)
DIMENSIONS:
Cutting diameter mm (in) 480 (18.9") 480 (18.9") 600 (23.6") 650 (25.6")
A Roller opening, max. 530 (20.9") 680 (26.8") 520 (20.5") 550 (21.7")
B Opening upper knives 460 (18.1") 460 (18.1") 600 (23.6") 640 (25.2")
C Opening lower knives — — — —
D Width max. 1200 (47.2") 1360 (53.5") 1400 (55.1") 1720 (67.7")
E Height to vertical knife 1110 (43.7") 1110 (43.7") 1290 (50.8") 1650 (65.0")
F Roller diameter 310 (12.2") 310 (12.2") 395 (15.5)" 460 (18.1")
G Height including roller slewing 1400 (55.1") 1400 (55.1") 1440 (56.7") 1800 (70.9")
Model
370.2 370E 380 385
Item
WEIGHT kg (lb) 1470 (3,241) 1600 (,3527)
2020 (4,453) 2700 (5,952)
Incl. Topping saw 1710
kN 28,2 - 30.7* 23.5 - 34.3* 35 40
Feed force (gross)
kgf 2875-3130 2400 - 3500 3570 4070
(lbf) (6,340 - 6,900) (5,280 - 7,710) (7,870) (8,970)
Feed speed
m/s (ft/s) 0 - 5 (0 - 16.4) 0 - 5 (0 - 16.4) 5.5 (18.0) 5.5 (18.0)
DIMENSIONS:
Cutting diameter mm (in) 700 (27.6") 700 (27.6") 610 (24.0") 740 (29.0")
A Roller opening, max. 600 (23.6") 600 (23.6") 600 (23.6") 630 (24.8")
B Opening upper knives 640 (25.2") 640 (25.2") 710 (28.0") 710 (28.0")
C Opening lower knives 750 (29.5") 750 (29.5") — —
D Width max. 1950 (76.8") 1950 (76.8") 1650 (65.0") 1900 (75.0")
E Height to vertical knife 1780 (70.1") 1780 (70.1") — —
F Roller diameter 547 (21.5") 547 (21.5")
G Height including roller slewing 1920 (75.6") 2080 (81.9") 2130 (84.0") 2565 (101.0")
* : Depending on feed roller engine
10A-5
Specifications & Dimensions HARVESTERS
Harvester head
Model
395
Item
WEIGHT kg (lb) 4150 (9,150)
Incl. Topping saw
kN 49
Feed force (gross)
kgf 5000
(lbf) (11,020)
Feed speed
m/s (ft/s) 4.9 (16.1)
DIMENSIONS:
Cutting diameter mm (in) 815 (32.0")
A Roller opening, max. 790 (31.1")
B Opening upper knives 965 (38.0")
C Opening lower knives —
D Width max. 2140 (84.0")
E Height to vertical knife —
F Roller diameter
G Height including roller slewing 2950 (116.0")
10A-6
Installation Kit for Valmet Harvester heads HARVESTERS
Installation Kit for Valmet Harvester heads on Komatsu PC200, PC210 and PC228
Valmet installation system makes it easy to fit harvester heads to excavators. The kit provides a well-proven and complete
solution that easily and inexpensively transforms an excavator into an efficient forestry machine.
The system is especially designed for Komatsu excavators and works with all harvester heads in the Valmet 300 series.
The kit includes complete installation instructions, with hydraulics and electrical diagrams. The thorough documentation
ensures high reliability and simplifies troubleshooting.
The installation kit provides rapid access to all necessary components, including the mounting adapter, the hydraulic lines
and the electrical circuits. In addition, the kit includes important details for increased operator safety.
10A-7
MEMO
SECTION 10B
FORWARDERS
CONTENTS
Features .................................................................. 10B-2
Specifications ......................................................... 10B-3
Dimensions ............................................................. 10B-5
10B-1
Features FORWARDERS
• Outstanding loader
Strong and fast loaders with up to 8,5 meters reach. Great reliability is ensured by the outer boom and lift
cylinders, the hose routing and the hose routing between the machine and the crane. Crane maneuvering
is smooth thanks to limit dampening. The crane tip solution, Valmet ProTec means a completely protected
hose passage in the crane tip between the crane and grapple and a braking technique that effectively
dampens grapple swing.
• Optimized comfort
The cabs are ergonomically designed down to smallest detail. Visibility is always good, whether loading,
driving or unloading. Everything is close at hand for the operator, even though the cab is unusually
spacious inside. Valmet cabs are known for low noise and vibration levels. A good operator environment
allows operators to concentrate better throughout their work shifts and remain highly productive.
10B-2
Specifications FORWARDERS
Model
801 Combi 830.1 840.3 860.3
Item
OPERATING WEIGHT (approx.)
6WD kg (lb) — — 13900 (30,640) 14360 (31,660)
8WD 19800 (43,660) 10500 (23,150) 15400 (33,950) 15860 (34,960)
HORSEPOWER (DIN)
Gross kW (HP)/rpm 140 (190)/2200 99 (134)/2200 125 (170)/2200 140 (190)/2200
PERFORMANCE:
Max. permissible load kgf (lbf) 13000 (28,660) 9000 (19,840) 12000 (26,460) 14000 (30,860)
Load area to RTG standard m2 (sq ft) 4.1 (44.1) 3.4 (36.6) 4.1 (44.1) narrow: 4.5 (48.4)
wide: 4.8 (51.7)
Max. pulling power kN 167 110 150 160
kgf (lbf) 17030 (37,500) 11220 (24,730) 15300 (33,730) 16300 (36,000)
Max. travel speed Hi km/h (MPH) 24 (15) 20 (12) 24 (15) 24 (15)
Lo 8 (5) 10.5 (6.2) 8 (5) 8 (5)
ENGINE: Sisu Diesel Sisu Diesel Sisu Diesel Sisu Diesel
Model 66EWA 44EWA 66ETA 66CTA
Torque Nm/rpm 740/1200 540/1500 650/1400 800/1500
HYDRAULIC SYSTEM:
Hydraulic pump Variable capacity Variable capacity Variable capacity Variable capacity
Max. flow Itr. (U.S.Gal)/min. 240 (65) 170 (45) 290 (77) 290 (77)
Working pressure kg/cm2 (PSI) 235 (3,335) 220 (3,125) 240 (3,410) 240 (3,410)
LOADER AND GRAPLE
Loader CRC15 CRF5, CRF5C CRF8.1, CRF8.1C CRF10/CRF10C
Lifting moment, gross kNm 171.5 67 106.1 114.8
Turning moment, gross kNm 39 21.9 28.7 28.7
Reach m (ft.in) 11 (36’1”) 6.8 – 9.3 7.8 – 9.6 7.8 – 9.6
(21’4” – 30’6”) (307 – 378) (25’7” – 31’6”)
Grapple — G25 G28 or G36 G28 or G36HD
WHEEL & AXLES
6WD front — — 600/65 × 34 600/65 × 34
700/55 × 34 700/55 × 34
710/55 × 34 710/55 × 34
6WD rear — — 600/55 × 26.5 600/55 × 26.5
700/50 × 26.5 700/50 × 26.5
710/45 × 26.5 710/45 × 26.5
8WD front 600/55 × 26.5 600/50 × 22.5 600/55 × 26.5 600/55 × 26.5
700/50 × 26.5 700/40 × 22.5 700/50 × 26.5 700/50 × 26.5
710/45 × 26.5 700/45 × 22.5 710/45 × 26.5 710/45 × 26.5
8WD rear 600/55 × 26.5 600/50 × 22.5 600/55 × 26.5 600/55 × 26.5
700/50 × 26.5 700/40 × 22.5 700/50 × 26.5 700/50 × 26.5
710/45 × 26.5 700/45 × 22.5 710/45 × 26.5 710/45 × 26.5
Turning radius 600 wheels mm (ft.in) 8356 (27’5”) 6656 (21’10”) 7853 (25’9”) 8146 (26’9”)
Turning radius 700 wheels — 6750 (22’2”) 8196 (26’11”) 8246 (27’1”)
CAPACITY (Refilled)
Fuel tank Itr. (U.S.Gal) 430 (114) 98 (25.9) 130 (34.3) 160 (42.3)
10B-3
Specifications FORWARDERS
Model 890.3
Item
OPERATING WEIGHT (approx.)
6WD kg (lb) 16800 (37,040)
8WD 18900 (41,670)
HORSEPOWER (DIN)
Gross kW (HP)/rpm 170 (230)/1700
PERFORMANCE:
Max. permissible load kgf (lbf) 18000 (39,680)
Load area to RTG standard m2 (sq ft) 5.4 (58.1)/
6.0 (64.6)
Max. pulling power kN 207
kgf (lbf) 21000 (46,310)
Max. travel speed Hi km/h (MPH) 25 (15.5)
Lo 9 (5.6)
ENGINE: Sisu Diesel
Model 74CTA
Torque kgm (ft-lbs)/rmp 1000/1500
HYDRAULIC SYSTEM:
Hydraulic pump Variable capacity
Max. flow Itr. (U.S.Gal)/min. 340 (89.8)
Working pressure kg/cm2 (PSI) 240 (3,410)
LOADER AND GRAPLE CRF14
Loader kNm 155
Lifting moment, gross kNm 41.3
Turning moment, gross m (ft.in) 7.5 – 8.5
Reach (29’5” – 33’5”)
G36, G36HD
Grapple G40, G40HD
WHEEL & AXLES
6WD front 700/70 × 34
10B-4
Dimensions FORWARDERS
D
E F G
B A
FVBH0361
D
E F G
B A
FVBH0362
B Width mm (ft.in) 2850 (9’4”) 2600 (8’6”) 2600 (8’6”) 2622 (8’6”)
C Height mm (ft.in) 3948 (12’11”) 3526 (11’7”) 3809 (12’6”) 3809 (12’6”)
D Ground clearance mm (ft.in) 680 (2’3”) 622 (2’0”) 683 (2’3”) 683 (2’3”)
E From front to front axle mm (ft.in) 2316 (7’7”) 2409 (7’11”) 2500 (8’2”) 2500 (8’2”)
F From front to axle to waist mm (ft.in) 2180 (7’2”) 1850 (6’1”) 1670 (5’6”) 1670 (5’6”)
G From waist to back axle mm (ft.in) 3018 (9’11”) 2300 (7’7”) 3297 (10’10”) 3297 (10’10”)
B Width mm (ft.in) 2740 (9’0”) 2722 (8’11”) 2970 (9’9”) 2995 (9’10”)
C Height mm (ft.in) 3809 (12’6”) 3809 (12’6”) 3950 (13’0”) 3965 (13’0”)
D Ground clearance mm (ft.in) 683 (2’3”) 683 (2’3”) 740 (2’3”) 765 (2’6”)
E From front to front axle mm (ft.in) 2500 (8’2”) 2500 (8’2”) 2540 (8’4”) 2540 (8’4”)
F From front to axle to waist mm (ft.in) 1670 (5’6”) 1670 (5’6”) 1670 (5’6”) 1670 (5’6”)
G From waist to back axle 3297 (10’10”) 3297 (10’10”) 3730 (12’3”) 3730 (12’3”)
10B-5
MEMO
SECTION 10C
TRACK FELLER
BUNCHERS
CONTENTS
Features .................................................................. 10C-2
Specifications ......................................................... 10C-3
Dimensions ............................................................. 10C-4
10C-1
Features TRACK FELLER BUNCHERS
• Unique set-back boom design offers a greater working range. Numerous boom options ranging from
6.53 m – 9.42 m (21'5" – 30'11"), provide excellent lift capacity and a wide cutting sweep for long reach
harvesting or felling.
• Powerful engine meet Tier II emissions standards. Renowned for producing high torque at low RPM,
SisuDiesel reduces noise, vibration and heat, while delivering dramatic fuel savings.
• Load sensing hydraulics apportions flow where you need it, when you need it.
• Easy service access. Lockable enclosures allow easy access and ground-level servicing at all routine
service points.
• Purpose-built forestry carbody and track drive system with independent closed loop hydrostatic drive.
• Larger, taller front window improves the operator's line of sight and increases tree-top view (sky window is
optional).
• Control system and gauges are ergonomically positioned into a new, fully integrated non-glare dash
board.
• Certified cab is safe, comfortable and spacious with extra storage space. New electronic controls eliminate
hydraulic oil pilot lines in cab.
• IQAN carrier control system developed for the EX-Series, makes these the smoothest track machines
ever.
• The EX-Series is flexible allowing you to equip your machine as a harvester or a feller buncher. Fit the
attachment type that is right for your job.
• EXL models feature the legendary. Timbco 2-cylinder, 4-way leveling system the industry's gold standard
for simplicity reliability and value. With over 5 million hours logged this proven leveling system will take you
up the steepest scopes and bring you back down safety.
475 EX/EXL
10C-2
Specifications TRACK FELLER BUNCHERS
10C-3
Dimensions TRACK FELLER BUNCHERS
F
A
G
B
E
C
D
FVBM0363
G
B
E
C
D
FVBH0364
B Ground clearance mm (ft.in) 620 (2’0”) 810 (2’8”) 700 (2’4”) 880 (2’11”)
C Track length mm (ft.in) 4090 (13’5”) 4750 (15’7”) 4440 (14’7”) 4670 (15’4”)
D Reach max. mm (ft.in) 6530 (21’5”) 6530 (21’5”) 6530 (21’5”) 6530 (21’5”)
B Ground clearance mm (ft.in) 760 (2’6”) 760 (2’6”) 760 (2’6”) 700 (2’4”)
C Track length mm (ft.in) 4670 (15’4”) 4670 (15’4”) 4670 (15’4”) 4440 (14’7”)
D Reach max. mm (ft.in) 6530 (21’5”) 8030 (26’4”) 8030 (26’4”) 10700 (35’1”)
10C-4
CONTENTS
INDEX
SECTION 11
GENERATOR SETS
CONTENTS
Features ..................................................................... 11-2
Specifications ............................................................ 11-3
11-1
Features GENERATOR SETS
1. New Engine
Komatsu "Air-to-Air Aftercooled Engine" has been introduced. (Except for EGS45-5 to EGS300-6 , and EGS650-6)
• High Output (Performance)
• Low Fuel Consumption
• Low Noise
• Lighter Weight and Compactness
• Longer Oil Change Interval
• Easy Maintenance
• High Quality, High Reliability, High Durability
2. Easy Operation and Control
2-1.Engine & Generator control panel is arranged in one box, and located in front of Generator.
So the operator can monitor the operating status easily by viewing the meters.
Advantage:
• Simple : Minimized control equipment and wiring
• Easy Maintenance
2-2.Compact Engine Control Unit
EGS Series generators have a compact engine control unit ( 1 box type ) for easy operation and maintenance.
Advantage and Functions
• Microprocessor : Control status and factor are programmed in Microprocessor.
• High Reliability : Engine control circuit is integrated in printed boards.
• Easy selection : A Mode Key Switch for Off / Auto / Manual
• Built-in AMF function : Auto Start / Stop, Cranking with attempts and Cool running are Standard Function.
• Iconic, Symbols and LED : Operating process and Alarm condition can be monitored.
3. High qualified electricity with Brushless, Self-excited AC Alternator
• Maintenance-Free : Brushless, Direct coupling with engine
• High Electric Characteristic : Standard 2/3 pitch windings avoid excessive neutral currents.
• Excellent Voltage Build-Up : Originally designed excited field system and high efficient steel
• Stable Voltage Regulation : Built-in type Automatic Voltage regulator (AVR)
• High Efficient Cooling : Class H insulation with forced air-circulation
• Permanent Magnet Generator (PMG) (Optional ) : PMG systems provides constant excitation
• Voltage Adjustment (Optional accessory by model ) : The voltage can be adjusted manually.
• Dual Voltage (Optional) : Two kinds of voltage can be given.
4. Safe Running (Protection)
• MCCB (Molded Case Circuit Breaker) can be opened by Over Current automatically.
• The engine can be stopped by High coolant temperature / Low oil pressure automatically
• The engine can be stopped by Over speed .
• Engine stop system : Energized in Run mode
The engine can be stopped automatically in case of the following condition.
(1) Over speed, (2) High coolant temperature, (3) Low oil pressure, (4) Emergency button is pushed.
5. Various Generator Type
EGS Series Generator has 4 types.
(1) Bonnet & Soundproof type with Control panel and MCCB : For single operation at residential area
(2) Non Bonnet type with Control panel and MCCB : For single operation in the room
(3) Non Bonnet type with Engine control panel : For parallel operation in the room
* Typical Generator Type
Open type for Single operation
11-2
Specifications GENERATOR SETS
11-3
Specifications GENERATOR SETS
11-4
Specifications GENERATOR SETS
11-5
Specifications GENERATOR SETS
11-6
CONTENTS
INDEX
SECTION 12
ENGINES
CONTENTS
Features .....................................................................12-2
Specifications ............................................................12-3
Engine used in KOMATSU Machines
by engine model .....................................................12-4
High Altitude Deration ..............................................12-6
12-1
Features ENGINES
High quality:
The Komatsu diesel engine is a true achievement of our total engine production system-from casting all the
way through machining processes using Komatsu-made machine tools to the final steps of assembly.
Proven reliability
The Komatsu diesel engine is matched with our heavy-duty construction equipment to create a powerful
combination of unbeatable performance and high durability.
Economical operations:
The Direct injection system and special fuel-minimizing design of Komatsu diesel engines provide maximum
economy. Low lubricant consumption is also a remarkable advantage.
Compact design:
Advanced design and an efficient production system make Komatsu diesel engines compact and lightweight,
enhancing their versatility.
Low-noise operation:
Ideal designs keep engine noise and vibration to a minimum.
Wider applications:
A wide range of optional equipment offers a variety of applications to meet specific customer requirements.
Low emission engine:
Komatsu engine meets the emission regulations of North America, Europe, Japan, etc. by employing the
advanced technologies. The followings are examples of the technologies.
High-pressure injection system
Fuel is sprayed more finely to prevent increase of NOx and particulate matter by heightening the fuel
pressure injected into the cylinder.
Air-cooled aftercooler
Intake air temprature pressurized by the turbocharger is lowered largely by the air-cooled aftercooler
having high cooling capacity to prevent increase of NOx caused by high combustion temperature and
increase the intake air density for less fuel consumption.
Optimized shape of combustion chamber by use of FCD piston
The shape of the combustion chamber is optimized by employing an FCD piston having high strength and
the air flow speed is heightened by improving the shape of the air intake passage. With these
technologies, particulate matter is reduced.
Air-cooled aftercooler
High-pressure fuel
injection pump
Fuel accelerating
FCD piston
Optimize swirling
of intake air
12-2
Specifications ENGINES
12-3
Engines used in KOMATSU ENGINES
Machines by Engine Model
12-4
Engines used in KOMATSU ENGINES
Machines by Engine Model
12-5
High Altitude Deration ENGINES
12-6
High Altitude Deration ENGINES
12-7
MEMO
CONTENTS
INDEX
SECTION 13
TIRES
CONTENTS
Tire classifications ....................................................13-2
Tire manufacturer's designation ..............................13-3
Tire knowledge:
Tire size designation ............................................13-4
Structure and function of tire ..............................13-4
Comparison of bias and radial tires ...................13-7
Tread pattern .........................................................13-8
Depth of tread groove on rock-type tires ...........13-8
TKPH (TMPH) ........................................................13-8
Tire characteristics ...............................................13-9
Tire identification ................................................13-10
Tire selection ........................................................... 13-11
13-1
Tire Classifications TIRES
13-2
Tire Manufacturer's TIRES
Designation
TIRE PATTERN
Maker
TRA classfication
BRIDGESTONE MICHELIN TOYO GOODYEAR YOKOHAMA
E1 XRIB
*VKT, VHS XGC, XHC, XLB qGP-2B
E2 VSB, VFT XMP, XS, XVC
qVLT XNOPLUS Indice E qRL-2+
*VEL, *L317 qXADN qT-332, qT-351 qGP-3D, qTL-3A+ qRT31, qRL31
*RL, *WL XAD65, XHAD *HRL-3A, *EV-3+ qRB31
E3
*VL2, qVMT XKB, XTS, XRB qT-352, *G-18 *RL-3+ *Y-38, *Y-67
qVSTL XRDN
*VELS, *VRLS *X-QUARRY *T-431, *T-433 qGP-4BAT *RB41, *Y-523
*VRLSA, *ELS2 *XDTA4 *T-451, *T-452 qGP-4D *Y-530, *Y-523U
*RLS, *VMTP *XDRA *T-452A, *T-452B *HRL-4B, *GP-4C
E4 *VZTP, *VMTS qXADT *T-453, *G-18ET *RT-4A, *GP-4B
*RLS2, *VALS XDC, XDM, XHD1 *G-36ET *RL-4J/4J II
qVLTS XHAUL, XKD1 *G-36ETB *RL-4H/4H II
XRS, XZH *RL-4A, *RL-4B
E7 VSJ, AL, SCP2 XRIB, XS
G1 RG R-3 Y-37
G2 VKT, FG, GL XGLA2, XMPS G-15, G-15A RT21, Y-103
XSNOPLUS, XTLA G-57S Y-25, Y420
G3 XHA, XHAD, XHF Y-67
XLD, XRA, XRDN
G4 XLDD1, XRD1
G5 XLDD2
FG XM27, XM37 G-15, G-15A Y103
XGLA2, XMPS G-22
L2
XTLA
XSNOPLUS
VSTL, TL XHA, XHAD, XHF T-332, T-351 RT31, RL31, RB31
VL2, VL2A XKA, XLD, XRA T-352, G-39 Y-575, Y-67
L3 VMT, RL XRDN, XZSL G-18, G-18A Y-526
STABIL’X XZSL G-18S, G-62
NL, RLS XRD1A G-64, T-453 Y-545, Y-67ET
L4 RLS2 XDD1A G-18ET Y-522, Y-69ET
XMINED1 Y-69KET, Y-69U
XKD1, XLDD1
VSDL, VSDT XLDD2A G-65A, S-26 Y-524, Y524Z
L5 DL XMINED2 G-65, S-26 Y69KSET, Y-69SET
DL2, DL2A XRD2 G-25, G-55 Y-525, Y-69U
* : For Rigid Dump Truck
q : For Articulated Dump Truck
13-3
Tire Knowledge TIRES
Nowadays the ply rating shows the strength of the tire; it no longer shows the number of layers of cord
cloth. Originally the term "ply" did in fact refer to the number of layers of cord cloth, and was therefore an
indication of the tire strength. But with the development of new materials, the original cotton cord cloth
changed first to rayon and has now been replaced by nylon or steel wire.
This has made it possible to greatly increase the strength without increasing the number of layers of
material. Consequently the term "ply rating" has come to be used to indicate the strength of the tire rather
than to express the actual number of plies.
Stars (*,**,***) are used to indicate the strength of radial tires.
b) Breaker
Extra layers of rubber-coated cord are placed
between the outer plies and the tread. They
prevent cuts reaching the ply cords through tread,
and absorb shocks.
c) Plies
A tire is composed of several layers of plies,
coated on both sides by a rubber compound.
These maintain inflation pressure of the tires
supporting load. These plies are made of high
tensile nylon cord.
The term "Ply Rating", according to the Tire and Rim Association (TRA), is defined as follows:
"A given tire with its maximum recommended load when used in specific type service. It is an index of tire
strength and does not necessarily represent the number of cord plies in the tire."
d) Inner liner
The inner liner is a rubber layer covering the inside from bead to bead of a tubeless tire, corresponding to
the tube of an ordinary tube tire. It prevents the loss of inflation pressure of the tire.
13-4
Tire Knowledge TIRES
e) Beads
Beads are the parts which fix the tire to the rim. All plies are tied into bundles of steel wire. The beads fit on
the rim perfectly, preventing the tire from slipping out of the rim contour while the vehicle is in motion.
g) Side-walls
Side-walls are covers made of a flexible rubber compound to protect the sides of the tire. Side-walls are
designed to cushion the plies from shocks and cuts, and to flex and bend without cracking, under ordinary
usage.
13-5
Tire Knowledge TIRES
FVBH0370
FVBH0371
13-6
Tire Knowledge TIRES
Shoulder
steel Nylon carcass
carcass (multiple ply)
(one ply)
Bead
13-7
Tire Knowledge TIRES
4. Tread pattern
The tread pattern can be divided broadly into the type in Fig. 1, which has no circumferential groove in the
tread center, the type in Fig. 2, which has transversal grooves, and the type in Fig. 3, which has a block
pattern. Generally speaking, the first type provides excellent resistance to cutting and wear, while the
second type provides excellent traction on slippery surfaces. The block pattern is typical of radial tires
giving good all round performance.
6. TKPH (TMPH)
The primary task of heavy-duty tires is to haul heavy loads faster and over longer distances. This heavy
load hauling inevitably results in heat built-up inside the tires, and tires have limitation of temperature.
If this limitation is reached, deterioration of the tire will begin at an early stage of operation. Accordingly, it
is necessary when selecting tires, to determine the amount of work will keep the tire within a safe range to
avoid over-heating when a vehicle is operated under given conditions.
The amount of work done under the given conditions and within a safe range is shown as the "TON-KILO-
PER-HOUR" ("TON-MILE-PER-HOUR") which can be determined by the following formula:
Average tire load = 1/2 (tire load when vehicle carries no load + tire load when vehicle is loaded)
round trip distance × number of job cycles per day
Average speed =
total hours of operation per day
13-8
Tire Knowledge TIRES
7. Tire characteristics
The optimum tires should be selected for their applicable operation or job and terrain conditions depending
on the cutting (wear) resistance and heat resistance. These resistant qualities are indicated as follows:
Because of the structure and quality of the rubber used for the tread, cut resistance and wear resistances
are mutually opposite to heat resistance, so when selecting tires, always check the TKPH.
Depending on the tire, super heat-resistant (SHR) and super cut-resistant (SCR) tread rubber are
available, so ask your tire distributor for details of tires that are not listed in the operation manual.
13-9
Tire Knowledge TIRES
8. Tire indentification
Tire characteristics BRIDGESTONE MICHELIN YOKOHAMA TOYO
2A CP
(Cut protected)
(cut-resistant)
CR 2V* A4 CP-C
CR
(Cut-resistant) (Special cut-resistance) A (Cut protected specification)
CP-S (Cut-resistant)
2Z*
(Special cut-resistance) (Cut protected and
reinforced specification)
REG
(Regular)
PE-R
GP 1A B4 SP
(General purpose) (Standard) B (Regular specification)
(Standard purpose)
RE-T
(Regular heat-resistant
specification)
HR
(Heat resistant)
HR-H
HR 3A C4 HR
(Heat-resistant) (Heat-resistant) C (Heat-resistant specification) (Heat resistant)
HR-V
(Heat-resistant and reinforced
specification)
* Bias tire only
Type A: Particularly resistant to cuts, tread tearing and abrasion at average speeds which are higher
than those for A4 (above).
Type B4: Compromise solution between abrasion resistance and average speed on rough surfaces.
(available in sizes 49 inch rim diameter and above)
Type B: Higher resistance to internal heat generation on surfaces which are not particularly rough.
Type C4: For running on long cycles at high speeds on well maintained roads.
Type C: Very high resistance to high average speeds on long cycles run on well maintained roads
Ultra Heat
2 S Standard
Resistant
13-10
Tire selection TIRES
Selecting tires suitable to working conditions (Structure of tire and quality of rubber)
Examples of procedure for selecting tires of dump truck and wheel loader
(1) Carrying material in mine (limestone) or stone crushing pit (RDT, ADT)
(2) Carrying material in mine (coal, iron ore, etc.) (RDT, ADT)
Radial structure
(3) Carrying material in dam construction or civil engineering field (RDT, ADT)
NOTE: Some tires in the above table cannot be selected for some destinations.
13-11
MEMO
CONTENTS
INDEX
SECTION 14
FOR SEVERE ENVIRONMENTS Sec 14A
FOR MINING Sec 14B
SECTION 14A
FOR SEVERE
ENVIRONMENTS
CONTENTS
Introduction ............................................................ 14A-2
Recommendation for low grade fuel usage ......... 14A-3
Recommendation for sandy and
dusty terrain condition ................................... 14A-4
Recommendation for high altitude ....................... 14A-5
Recommendation for cold and
extremely cold weather area .......................... 14A-7
Tropical weather specification .............................. 14A-9
14A-1
Introduction FOR SEVERE
ENVIRONMENTS
KOMATSU products are designed to meet various application requirements in a wide range of natural
environment and social situations on the globe. For operation under extremely severe environmental
conditions, where the mere standard spec is inadequate, KOMATSU offer a variety of options for special
application to be added to or substituted for the standard spec so as to reach the full potential of the machine
even in such conditions.
In this chapter, why such special care is necessary and what are in the special spec are explained with
typical examples.
It is recommended to consult KOMATSU through the distributor for actual choice of a spec for such special
application.
North Pole
(4)
(2) (3)
14A-2
Recommendation for FOR SEVERE
Low Grade Fuel Usage ENVIRONMENTS
The quality of fuel depends on the districts and fuel suppliers. In addition, if the fuel is stored under bad
condition, its quality may be lowered.
1) Dirt
Since dirt in the fuel clogs the filter quickly, it can lower the engine power. In addition, it can lower
circulation of the fuel and wear the internal parts of the injection pump quickly. To solve this problem, a
filter of finer mesh should be used or the number of filters should be increased.
(Additional fuel filter for low grade fuel)
Fuel tank
Feed Injection
pump pump
Komatsu Engine P
Larger capacity
main filter
Fuel tank Return
PT pump
Cummins
Engine P
2) Water
Water in fuel rusts the fuel piping. In addition, it lowers lubrication performance, and that wear the sliding
parts of the injector, injection pump, etc. To solve this problem, a water separator should be installed.
Water Separator
Point: Fuel-water separator to be installed when there are water
contamination (>0.1%) risks due to poor fuel storage or
environmental factor
Types of Fuel Pump Installation Positions
Fuel tank
Feed pump
To injection
Injection pump pump
(Komatsu Engine) Filter
Fuel tank
PT pump To PT
(Cummins Engine) pump
Water separator
3) Sulfur
If fuel contains sulfur, sulfuric acid is produced and it accelerates internal corrosion. If it is obliged to use
fuel containing sulfur by 0.5% or more, use high TBN (Total Base Number) oil.
If fuel containing sulfur is used, the oil is deteriorated quickly and it should be replaced at shorter intervals.
For detail, see MAINTENANCE in the Operation & Maintenance manual.
14A-3
Recommendation for Sandy and FOR SEVERE
Dusty Terrain Condition ENVIRONMENTS
This specification should be applied to not only sandy terrain but also dusty terrain. It is essential when the
view range is 0 meter.
2) Cyclone-type pre-cleaner
While the dust accumulated in the conventional US pre-cleaner must be removed by hand, the dust
swirled and sucked into TURBO-II and Enginaire (as example) are discharged automatically by a
centrifugal force.
Pre-creaner
(Example)
Engine hood
FVBH0291
TURBO-II Enginaire
(Example)
The air cleaner element must be replaced with new one after it is cleaned 6 times. If this new indicator is
used, however, the air cleaner element can be replaced according to its clogging condition. As a result,
the maintenance cost can be reduced.
14A-4
Recommendation for High Altitude FOR SEVERE
ENVIRONMENTS
As altitude is increased, air is more rarefied (atmospheric oxygen is reduced) and the quantity of fuel is
increased for the quantity of air. As a result, combustion becomes incomplete and the exhaust temperature
rises. The rise of the exhaust temperature can cause a serious engine trouble such as melting of the valves.
In addition, the air resistance decreases and the turbocharger speed rises extremely and its lifespan is
shortened remarkably.
1) The fuel injection rate must be reduced to secure a proper air-fuel ratio for combustion. If a mechanical
injection pump is employed, it must be readjusted mechanically. If fuel is controlled electronically, the
software of the engine controller must be changed.
2) Turbocharger
1) The turbocharger may need to be replaced with one equipped with an over-speed prevention device.
2) The turbocharger may need to be replaced with a water-cooled one to prevent shortening of its lifespan
caused by high temperature.
(Example: Water-cooled turbocharger)
Oil
Water (coolant)
Quick-release valve
Pressure reducing
valve
Hydraulic tank
pressure switch
14A-5
Recommendation for High Altitude FOR SEVERE
ENVIRONMENTS
(Example: HD785-5 with high altitude specification)
(1) (2)
(3)
FVBH0299
FVBH0292
3) Pressurization of radiator
The radiator cap is replaced to
prevent lowering of boiling
point at high altitude.
14A-6
Recommendation for Cold and FOR SEVERE
Extremely Cold Weather Area ENVIRONMENTS
In a cold district or a cold season, the engine does not start easily because of the low temperature. The
reasons for this phenomenon is that the battery lowers in function and cannot supply a necessary current and
the resistance to rotation increases as the viscosity of the lubricating oil of the power train and hydraulic oil
increases. In addition, if the temperature lowers below -20°C, the oil in the track rollers and final drive
solidifies. As a result, the floating seals are dragged and the O-rings are broken, and that can cause internal
breakage.
To solve these problems, the following measures are necessary.
(Example)
Cold Extremely
Spec
weather cold weather
Note Purpose
Minimum
Part ambient temp. -30 ~ -20°C -50 ~ -30°C
Battery (✩1) Large-capacity Large-capacity Cable Improvement of startability
Starting motor Large-capacity Large-capacity (On drive side)
Alternator Large-capacity Large-capacity
Measures to prevent overcooling
• Reversible fan Necessary Necessary Since hydraulic driven fan can Prevention of lowering of power
rotate in reverse, reversible fan is
not necessary.
• Radiator curtain Necessary Necessary
• Radiator shutter Unnecessary Necessary
• Kilting Unnecessary Necessary
Reduction of dragging torque
• Oil pan heater (✩2) Unnecessary Necessary Improvement of startability
• Combustion heater (✩3) Unnecessary Necessary (Lowering of resistance on driven
side)
Undercarriage
• Employment of seals coated Necessary Necessary Prevention of breakage of
with nylon undercarriage caused by
• Employment of oil which does Necessary Necessary solidification of oil
not solidify even at -55°C
(Example) D275A-5 with extremely cold weather specification (cold weather specification for CIS)
1) Warmth keeping for easy engine start
Cylinder Block
1500W x 1
Receptacle
Engine Oil Pan Power Train Oil Pan Outside electric power
600W x 1 600W x 2
Battery
C200 x 2
Portable Rocket
Heater 30000 Kcal/h
14A-7
Recommendation for Cold and FOR SEVERE
Extremely Cold Weather Area ENVIRONMENTS
Arctic Temperature Requirements for the Komatsu Hydraulic Mining Shovels
PC 3000 / PC 4000 / PC 5500 / PC8000
Temperature Temperature Temperature
Elements
down to −25°C down to −40°C down to −50°C
manufacture’s check manufacture’s certificate
High stress steel structure X ISO V-notch test ISO V-notch test
27 J at −40°C 27 J at −50°C
manufacture’s check manufacture’s certificate
Castings and forgings X ISO V-notch test ISO V-notch test
27 J at −40°C 27 J at −50°C
Screws and bolts X material change material change
Electric cable X material change material change
Batteries X preheating preheating
preheating
Hoses X X
up to −40°C
Engine start ether start preheating + ether start preheating + ether start
Engine coolant X preheating preheating
Engine oil X preheating preheating
Hydraulic oil X preheating preheating
Pump drive gear boxes X preheating preheating
Cab base electric cabinet X preheating preheating
Cab X preheating preheating
Machinery house X X preheating
Sealings X partly material change partly material change
X = standard delivery (no changes)
14A-8
Tropical Weather Specification FOR SEVERE
ENVIRONMENTS
If the machine is used in a jobsite where the atmospheric temperature exceeds +40°C and rises up to +50°C,
the temperature of the coolant and lubricating oil may rise above the allowable limit. Under this condition, the
engine and power train overheat and the lifespan of each part is shortened.
1) Large-sized radiator cooling fans
It is necessary to cool the coolant and lubricating oil properly. (Example: HD785-5, HD985-5)
2) Antifreeze
Antifreeze is not necessary naturally. Since fresh water is used, the heat balance is improved about
4°C. Corrosion resistor must be added and replaced periodically, however, to prevent rusting of inside
of the engine.
It is also important for protection of the engine to use soft water such as city water, since water in rivers
and ponds is hard in many cases.
4) Heat-resistant alternator
PTO
Cooler
FVBH0293
14A-9
MEMO
SECTION 14B
FOR MINING
CONTENTS
What is HAT? .......................................................... 14B-2
How to use HAT? .................................................... 14B-2
Haulage analysis tool ............................................ 14B-3
WA900/HD785 ..................................................... 14B-4
WA900HL/HD1500 .............................................. 14B-5
WA1200/730E ..................................................... 14B-6
WA1200HL/830E ................................................. 14B-7
PC1250SP/HD605 ............................................... 14B-8
PC1800/HD785 ................................................... 14B-9
PC3000/HD1500 ............................................... 14B-10
PC4000FS/730E ................................................ 14B-11
PC5500/830E .................................................... 14B-12
PC8000/930E .................................................... 14B-13
14B-1
Haulage Analysis Tool FOR MINING
What is HAT?
• HAT=Haulage Analysis Tool
• HAT charts provide productivity figures for both loader dependent and truck dependent haulage
applications.
• The productivity and unit cost figures exist for variable travel and load time scenarios.
• These comprehensive charts aid in identifying the most cost-effective fleet configuration for any given
haulage application.
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
8 Example
Round Trip Travel = 5 to 11 min
7
3 Tracks Required for a Loader cycle time
6
No. of Trucks
14B-2
Haulage Analysis Tool FOR MINING
As identified above, followings can be obtained when WA900 and Hd1500 are combined for the operation
with loader cycle time of 40 seconds and truck round trip travel time of 6 minutes.
A. From above 1, 2 and 3, the single truck production of HD1500 is 790 tonnes/Hr.
B. From above 4 and 5, 3 units of HD1500 may be allocated for a WA900 when the round trip travel time is
within 5.5 to 10.5 minutes.
C. From above6, The maximum fleet production is 1,660 tonnes/Hr that is equal to the loader production.
14B-3
Haulage Analysis Tool FOR MINING
WA900/HD785
WA900 /HD785
Tons Tonnes TRUCK DEPENDENT
2250 2000
Parameters
30
2000 1750 Bucket Size = 13 m3
Bucket Fill = 95%
(Productivity / hr / truck)
250 250
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 2,347 2,587
1 40 1,810 1,995
50 1,473 1,624
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0389
14B-4
Haulage Analysis Tool FOR MINING
WA900HL/HD1500
WA900HL /HD1500
Tons Tonnes TRUCK DEPENDENT
2250 2000
30 Parameters
2000 1750 Bucket Size = 11.5 m3
Bucket Fill = 95%
(Productivity / hr / truck)
250 250
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 2,176 2,400
1 40 1,660 1,831
50 1,341 1,479
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0390
14B-5
Haulage Analysis Tool FOR MINING
WA1200/730E
WA1200 / 730E
Tons Tonnes
4000 TRUCK DEPENDENT
3500
Parameters
3500 Bucket Size = 20 m3
3000 30
Bucket Fill = 95%
(Productivity / hr / truck)
1000 1000
500 500
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 3,687 4,064
1 40 2,830 3,119
50 2,296 2,531
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0400
14B-6
Haulage Analysis Tool FOR MINING
WA1200HL/830E
WA1200HL / 830E
Tons Tonnes
4000 TRUCK DEPENDENT
3500
Parameters
3500 Bucket Size = 18 m3
3000 30 Bucket Fill = 95%
(Productivity / hr / truck)
1000 1000
500 500
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 3,408 3,757
1 40 2,599 2,065
50 2,101 2,316
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0401
14B-7
Haulage Analysis Tool FOR MINING
PC1250SP/HD605
PC1250SP / HD605
Tons Tonnes TRUCK DEPENDENT
1400 1200
Parameters
Bucket Size = 6.7 m3
1200 30 Bucket Fill = 95%
(Productivity / hr / truck)
1000
Material Density = 1.78 ton/m3
1000 Number of Passes = 5
40 Efficiency = 60 min/hr
800
50
800
600
600
400
400
200 200
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 1,244 1,371
1 40 954 1,052
50 774 854
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0402
14B-8
Haulage Analysis Tool FOR MINING
PC1800/HD785
PC1800 / HD785
Tons Tonnes TRUCK DEPENDENT
2000 1800
30 Parameters
1800 1600 Bucket Size = 12 m3
Bucket Fill = 95%
(Productivity / hr / truck)
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 2,160 2,381
1 40 1,666 1,837
50 1,356 1,495
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0403
14B-9
Haulage Analysis Tool FOR MINING
PC3000/HD1500
PC3000 / HD1500
Tons Tonnes
3000 TRUCK DEPENDENT
2500
30 Parameters
2500 Bucket Size = 14.9 m3
Bucket Fill = 95%
(Productivity / hr / truck)
1000
1000
500 500
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 2,788 3,073
1 40 2,132 2,350
50 1,729 1,902
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0404
14B-10
Haulage Analysis Tool FOR MINING
PC4000FS/730E
PC4000 FS / 730E
Tons Tonnes
4000 TRUCK DEPENDENT
3500
30 Parameters
3500 Bucket Size = 22.2 m3
3000 Bucket Fill = 95%
(Productivity / hr / truck)
1000 1000
500 500
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 4,102 4,521
1 40 3,148 3,471
50 2,554 2,815
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0405
14B-11
Haulage Analysis Tool FOR MINING
PC5500/830E
PC5500 / 830E
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 5,093 5,814
1 40 3,929 4,331
50 3,198 3,525
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0406
14B-12
Haulage Analysis Tool FOR MINING
PC8000/930E
PC8000 / 930E
3000
3000
2000 2000
1000 1000
0 0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
LOADER DEPENDENT
9
6
No. of Trucks
3 Loader Productivity
Sec. (tonnes/hr) (tons/hr)
2
30 40 50 30 7,600 8,377
1 40 5,863 6,463
50 4,772 5,260
0
0 2 4 6 8 10 12 14 16 18 20
Round Trip Travel Time (min)
Round Trip Travel Time (min) = Haul Time + Return Time + Turn & Dump Time
FVBH0407
14B-13
MEMO
CONTENTS
INDEX
SECTION 15
PRODUCTIVITY Sec 15A
EARTHMOVING DATA Sec 15B
SECTION 15A
PRODUCTIVITY
CONTENTS
Calculation of production ..................................... 15A-2
Bulldozers ............................................................... 15A-4
Dozer shovels, wheel loaders ............................... 15A-6
Hydraulic excavators ............................................. 15A-9
Off-highway dump trucks .................................... 15A-13
Motor graders ....................................................... 15A-20
Compactors .......................................................... 15A-21
15A-1
PRODUCTIVITY
Calculation of production
When planning mechanized projects, one extremely important issue is how to calculate the production of the
machines.
The first step when estimating the production is to calculate a theoretical value as explained below. This
theoretical value is then adjusted according to actual figures obtained from past experience in similar
operations.
On the basis of these figures (particularly those for job efficiency) it will be possible to determine values
suitable for the project which will be neither over-optimistic nor wasteful.
Therefore it is first necessary to fully understand the theoretical calculations and to be able to obtain a figure
for working efficiency which is feasible on that job site.
From this it is possible to obtain a realistic figure for the work volume that can be attained.
60
Q= q × N × E = q × × E
Cm
Example:
1,000 m3 of unexcavated earth has to be hauled.
a) What will its volume be when it has been excavated ready for hauling?
b) What will its volume be if it is then compacted?
Earth volume
conversion factor (f)
15A-2
PRODUCTIVITY
Job efficiency depends on many factors such as topography, operator's skill, and proper selection and
disposition of machines. Time out of an hour machine use is actually used.
It is very difficult to estimate a value for job efficiency due to the many factors involved. Therefore, efficiency
is given in the following section as a rough guide.
15A-3
Bulldozers PRODUCTIVITY
BULLDOZERS
(DOZING)
The hourly production of a bulldozer when excavating or dozing can be obtained by using the following
fomula:
60
Q=q× × e× E
Cm
where Q : Hourly production (m3 /hr; yd3/hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (in minutes) e : Grade factor
E : Job efficiency
When calculating the standard productivity of a bulldozer, the figure used for the volume of earth hauled in
each cycle, was taken as blade capacity. In fact, production per cycle differs with the type of soil, so the blade
fill factor is used to adjust this figure. See Table 2 to select the factor.
Average dozing Soil is loose, but impossible to doze full blade of soil. Soil with gravel, 0.9 ~ 0.7
sand, fine crushed rock.
High water content and sticky clay, sand with cobbles, hard dry clay and
Rather difficult dozing natural ground. 0.7 ~ 0.6
Difficult dozing Blasted rock, or large pieces of rock 0.6 ~ 0.4
D D
Cm (min.) = + +Z
F R
15A-4
Bulldozers PRODUCTIVITY
(RIPPING)
Ripping production varies greatly according to such conditions as the properties of the rock, the method of
operation, and the operator's skill. Therefore, it is difficult to estimate. However, from available data, the
relationship as shown on the ripper section can be seen between seismic velocity and production.
QR × QD
Q=
QR +QD
15A-5
Dozer Shovels PRODUCTIVITY
Wheel Loaders
DOZER SHOVELS AND WHEEL LOADERS
(LOADING)
Generally, the hourly production can be obtained by using the following formula:
60
Q=q× × E
Cm
where Q : Hourly production (m3 /hr; yd3 /hr) q : Production per cycle (m3; cu.yd3)
Cm : Cycle time (min.) E : Job efficiency
q = q1 × K
FVBH0048
15A-6
Dozer Shovels PRODUCTIVITY
Wheel Loaders
(1) V-shape loading
Table 5 Average cycle time for wheel loader Table 6 Average cycle time for dozer shovel
Unit: min. Unit: min.
Bucket size 3.1 ~ Bucket size 3.1 ~
Loading ~ 3 m3 5 m3 5.1 m3 ~ Loading ~ 3 m3 5 m3
conditions conditions
A Easy 0.45 0.55 0.65 A Easy 0.55 0.60
B Average 0.55 0.65 0.70 B Average 0.60 0.70
C Rather difficult 0.70 0.70 0.75 C Rather difficult 0.75 0.75
D Difficult 0.75 0.75 0.80 D Difficult 0.80 0.80
Table 7 Average cycle time for wheel loader Table 8 Average cycle time for dozer shovel
Unit: min. Unit: min.
Bucket size 3.1 ~ Bucket size 3.1 ~
Loading ~ 3 m3 5 m3 5.1 m3 ~ Loading ~ 3 m3 5 m3
conditions conditions
A Easy 0.40 0.50 0.60 A Easy 0.55 0.60
B Average 0.50 0.60 0.65 B Average 0.60 0.70
C Rather difficult 0.65 0.65 0.70 C Rather difficult 0.75 0.75
D Difficult 0.70 0.75 0.75 D Difficult 0.80 0.80
The following table gives typical job efficiency as a rough guide. To obtain the actual production figure,
determine the efficiency in accordance with actual operating conditions.
60
Q=q× × E
Cm
where Q : Hourly production (m3/hr; yd3/hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (min.) E : Job efficiency
q = q1 × K
15A-7
Dozer Shovels PRODUCTIVITY
Wheel Loaders
2. Cycle time (Cm)
Load and carry
D D
Cm = + +Z
1000VF 1000VR
60 60 Hauling distance
FVBH0050
Where D : Hauling distance (m, yd) VF : Travel speed with load (km/hr; MPH)
VR: Return speed (km/hr; MPH) Z : Fixed time (min)
Speed km/hr(MPH)
Operation conditions
Loaded Empty
Hauling on well compacted flat road, few bumps in road surface, no 10 ~ 23 11 ~ 24
Good
meeting other machines, can concentrate on L & C. (6.2 ~ 14) (6.8 ~ 15)
Average Few bumps on road surface, flat road, some auxiliary work carrying 10 ~ 18 11 ~ 19
large lumps of rock. (6.2 ~ 11) 6.8 ~ 12)
10 ~ 15 10 ~ 16
Rather poor Bumps in road surface, high rate of auxiliary work.
(6.2 ~ 9.3) (6.2 ~ 10)
Poor Large bumps in road, meeting other machines, difficult to carry out 9 ~ 12 9 ~ 14
smooth work, large amount of auxiliary work. (5.6 ~ 7.5) (5.6 ~ 8.7)
Z= t1 + t2 + t3 + t2
15A-8
Hydraulic Excavators PRODUCTIVITY
HYDRAULIC EXCAVATORS
(CONSTRUCTION APPLICATION)
3600
Q=q× × E
Cm
where Q : Hourly production (m3 /hr; yd3 /hr) q : Production per cycle (m3; yd3)
Cm : Cycle time (sec.) E : Job efficiency
q = q1 × K
15A-9
Hydraulic Excavators PRODUCTIVITY
However, here we use cycle time = (standard cycle time) × (conversion factor)
The standard cycle time for each machine is determined from the following table.
Table 11 Standard cycle time for backhoe Unit: sec
Range Swing angle Range Swing angle
Model 45° ~ 90° 90° ~ 180° Model 45° ~ 90° 90° ~ 180°
PC78 10 ~ 13 13 ~ 16 PC240 15 ~ 18 18 ~ 21
PW130ES 11 ~ 14 14 ~ 17 PC270 15 ~ 18 18 ~ 21
PC120, PC130 11 ~ 14 14 ~ 17 PC300, PC350 15 ~ 18 18 ~ 21
PC160 13 ~ 16 16 ~ 19 PC380 16 ~ 19 19 ~ 22
PW170ES 13 ~ 16 16 ~ 19 PC400, PC450 16 ~ 19 19 ~ 22
PC180 13 ~ 16 16 ~ 19 PC600 17 ~ 20 20 ~ 23
PC200, PC210 13 ~ 16 16 ~ 19 PC750, PC800 18 ~ 21 21 ~ 24
PW200, 220 14 ~ 17 17 ~ 20 PC1250 22 ~ 25 25 ~ 28
PC220, PC230 14 ~ 17 17 ~ 20 PC1800 24 ~ 27 27 ~ 30
15A-10
Hydraulic Excavators PRODUCTIVITY
(MINING APPLICATION)
The production for Mining Shovels shuld be calculated on loaded trucks per hour
Hourly production = loaded truck per hour x truck capacity x time utilisation
Qh = Tn x Tq x E
Theoretical loaded trucks per hour = 3600 sec/(Loading time per truck + spotting time per truck)
Tn = 3600/(tT + tsp)
Loading time per truck = (truck size/bucket capacity) rounded x cycle time
tT = (Tq/(Bc x K x loose density)) rounded x tc
Gh = hourly production (ton/hr; US ton/hr)
Tn = number of loaded trucks per hour
Tq = truck capacity (ton; US ton)
E = time utilisation per hour (%)
tT = truck loading time (sec)
tsp = truck spotting time (sec)
Bc = bucket capacity (m3; cu.yd)
K = bucket fill factor (%)
tc = cycle time (sec)
Yearly production = (hours per year - service hours) x availability x mine efficiency
QY = Qh x (hy - hs) x Sa x M
QY = yearly production
hy = theoretical hours per year (hr)
hs = service hour per year (hr)
Sa = mining shovel availability (%)
M = mine efficiency (%)
15A-11
Hydraulic Excavators PRODUCTIVITY
(1) Backhoe
Digging conditions
Model Backhoe application
Easy Average Severe
PC3000 23 ~ 25 26 ~ 28 29 ~ 31 • Truck on lower level
PC4000 23 ~ 26 27 ~ 29 30 ~ 32 • Average swing 45°
PC5500 24 ~ 27 28 ~ 30 31 ~ 33
PC8000 25 ~ 28 29 ~ 31 32 ~ 34
Digging conditions
Model Backhoe application
Easy Average Severe
PC3000 32 ~ 35 36 ~ 38 39 ~ 41 • Truck on upper level
PC4000 33 ~ 36 37 ~ 39 40 ~ 42 • Average swing 120°
PC5500 34 ~ 37 38 ~ 40 41 ~ 43 • Optimized working depth 4-5 m
PC8000 35 ~ 38 39 ~ 41 42 ~ 44 (13'1"–16'5")
Digging conditions
Model Backhoe application
Easy Average Severe
PC3000 26 ~ 29 30 ~ 32 33 ~ 35 • Split bench application
PC4000 27 ~ 30 31 ~ 33 34 ~ 36 • Average swing 90°–120°
PC5500 28 ~ 31 32 ~ 34 35 ~ 37
PC8000 29 ~ 32 33 ~ 35 36 ~ 38
(2) Front shovel
Digging conditions
Model Front shovel application
Easy Average Severe
PC3000 24 ~ 26 27 ~ 29 30 ~ 32 • Truck on same level
PC4000 24 ~ 27 28 ~ 30 31 ~ 33 • Average swing 60°
PC5500 25 ~ 28 29 ~ 31 32 ~ 34
PC8000 26 ~ 29 30 ~ 32 33 ~ 35
15A-12
Off-Highway PRODUCTIVITY
Dump Trucks
OFF-HIGHWAY DUMP TRUCKS
When carrying out operations using a suitable number of dump trucks of suitable capacity to match the
loader, the operating efficiency is calculated in the following order:
D D
Cmt = n x Cms + + t1 + + t2
V1 V2
(1) (2) (3) (4) (5)
(1) : Loading time
(2) : Hauling time
(3) : Dumping time
(4) : Returning time
(5) : Spot and delay time
1) Loading time
The time required for a loader to load a dump truck is obtained by the following calculation.
Loading time = Cycle time (Cms) × No. of cycles to fill dump truck (n)
15A-13
Off-Highway PRODUCTIVITY
Dump Trucks
b) Number of cycles required for loader to fill dump truck full (n)
The payload of a dump truck depends on its capacity or weight.
* The bucket capacity and the body capacity, as a general rule, refer to heaped capacity but may be used
to refer to struck capacity depending on the nature of materials to be handled.
* The bucket fill factor is determined by the nature of soil to be excavated or loaded. In case of dozer
shovels or wheel loaders, a suitable factor can be selected from among those given in Table 3, 9, 10
according to the applicable loading condition.
15A-14
Off-Highway PRODUCTIVITY
Dump Trucks
Fig. 1 KOMATSU HD325 Dump Truck Travel Performance Curve
The maximum speed thus obtained is a theoretical value, and in order to convert this maximum speed to a
practicable average speed, the speed should be multiplied by a speed factor. An applicable speed factor can
be selected from the following table.
The above average speed is applicable in ordinary driving conditions. If there is any factor retarding the
vehicle speed, an applicable factor should be used.
15A-15
Off-Highway PRODUCTIVITY
Dump Trucks
c) Hauling time
If the hauling distance in each section is divided by the average speed given in the preceding
paragraph, the hauling time in each section will be obtained. If all of these times (for hauling and
returning) are added together, they will give the total hauling and returning time.
3) Dumping time
This is the period from the time when the dump truck enters the dumping area, to the time when the dump
truck starts its return journey after completing the dumping operation. The length of the dumping time
depends on the operating conditions, but average dumping times for favorable average and unfavorable
conditions are given by the following table.
However, particularly adverse conditions giving rise to extremely long dumping times are excluded.
4) Time required for the truck to be positioned and for the loader to begin loading.
The time taken for the truck to be positioned and
Operating conditions t2, (min.)
for the loader to begin loading also depends on
the operating conditions. As a general rule, a Favorable 0.1 to 0.2
suitable time can be selected from the table at Average 0.25 to 0.35
right. Unfavorable 0.4 to 0.5
As has so far been described, the cycle time of a
dump truck can be estimated by using the values
for factors obtained according to paragraph 1) to
4).
15A-16
Off-Highway PRODUCTIVITY
Dump Trucks
2. Estimating the number of dump trucks required (M)
The quantity of dump trucks required for use in combination with a loader working at its maximum
operating efficiency can be estimated by the following formula:
The total hourly production P of several dump trucks where they are doing the same job simultaneously is
estimated by the following formula:
60
P=C × × Et × M
Cmt
Table 16 gives typical job efficiency as a rough Table 16 Job efficiency of dump truck (Et)
guide.
Operating conditions Job efficiency
To obtain the actual production figure, determine
the efficiency in accordance with actual operating Good 0.83
conditions. Average 0.80
Rather poor 0.75
Poor 0.70
When dump trucks and loaders are used in combination, it is most desirable that the operating
capacity of the dump trucks be equal to that to the loaders. That is, conditions satisfying the
following equation are most desirable. Consequently, if the value of the left equation is larger, the
group of dump trucks has a surplus capacity. On the other hand, if the value of the right equation is
larger, the group of loaders has a surplus capacity.
60 60
C× × Et × M X q1 × K × × Es
Cmt Cms
The left equation has already been described. The right equation has the following meaning.
15A-17
Off-Highway PRODUCTIVITY
Dump Trucks
EXAMPLE
• A HD325, working in combination with a WA600, is hauling excavated material to a spoil-bank
500 meters away.
What is the hauling capacity of the HD325?
n is taken to be 4.
Loaded weight :
Weight when loaded = n × bucket capacity × bucket fill factor × loose specific gravity × 1,000
= 4 × 5.4 m3 × 0.9 × 1.6 × 1,000 = 31,104 kg
Using the Travel Performance Curve and Brake Performance Curve, the maximum speed for each
section can be calculated.
The values for HD325 can be calculated from PERFORMANCE CURVE on the section 7A.
15A-18
Off-Highway PRODUCTIVITY
Dump Trucks
The result is shown in the table below and the table of Hauling time and Returning time is 3.00 min.
60 60
P=C × × Et = 19.44 × × 0.83 = 137.3 m3/h
Cmt 7.05
15A-19
Motor Graders PRODUCTIVITY
MOTOR GRADERS
The motor grader is used for many purposes such as maintaining roads, final finishing for earthmoving
projects, trenching and bank cutting.
Therefore there are many methods of expressing its operating capacity.
NOTE: Graders usually operate on long stretches, so the time required for gear shifting or turning can be
ignored.
N× D
T= V× E
15A-20
Compactors PRODUCTIVITY
W
N= × n
Le – Lo
SOIL COMPACTORS
There are two ways of expressing the productivity of compactors: by the volume of soil compacted, and by
the area compacted.
W × V × H × 1000 × E
Q=
N
Where
Q = Hourly production (m3/hr)(volume of soil compacted)
V = Operating speed (km/hr)
W = Effective compaction width per pass (m)
H = Compacted thickness for one layer (m)
N = Number of compaction (number of passes by compactor)
E = Job efficiency
15A-21
Compactors PRODUCTIVITY
W
N= × n
Le – Lo
15A-22
SECTION 15B
EARTHMOVING
DATA
CONTENTS
Soil classification ................................................... 15B-2
Hauling performance of
construction machines:
Introduction ........................................................ 15B-4
Inherent machine capability ............................. 15B-4
Elements limiting the inherent
machine capability ......................................... 15B-5
Machine capabilities required
for earthmoving operations ......................... 15B-7
Summary and application ................................. 15B-9
Trafficability ..................................................... 15B-11
Machines and site planning ................................ 15B-12
15B-1
Soil Classification EARTHMOVING
DATA
SOIL CLASSIFICATION FOR EARTH-MOVING OPERATIONS
Various classifications have been established properly for soil depending on the purposes of earth-moving
operations. Generally speaking, however, detailed classifications of soil are not required for the ordinary
earth-moving operations.
Rather, attention is required to be given to whether the soil to be handled is of special ores or contains special
clay minerals.
Hereinafter is described the knowledge necessary for earth work planning prior to such operations as
digging, loading, hauling, pushing (spreading), rolling compaction, etc., on ordinary terrain.
* Data (figures) to be given hereinafter vary largely depending on various operating and environmental
conditions. Consequently, before starting the earth work, tests should be conducted to obtain correct
data for operations.
Some knowledge of the weight data per unit volume of materials of their major ingredients is important for
their handling or hauling in mines, etc.. The specific weight data of some major types of soil and ingredients
are given below.
15B-2
Soil Classification EARTHMOVING
DATA
ROCK TYPES AND COMPRESSION STRENGTHS
15B-3
Hauling Performance of EARTHMOVING
Construction Machines DATA
HAULING PERFORMANCE OF CONSTRUCTION MACHINES
INTRODUCTION
"What Model or type of a tractor is most suitable to pull this trailer?" "Is this bulldozer capable of going up this
hill while pulling that scraper loaded full?"
In order to give explicit answers to these questions, it is necessary to have the right understanding of the
hauling performance of vehicles.
For easy understanding, let us explain the hauling performance with the following machine capabilities and
related elements.
a) Output power
The engine horsepower of a construction machine is the most essential power of those developed by the
machine itself. This can be estimated by multiplying one element (traction force) by another element (a
travel speed). Accordingly, where the engine of a machine develops a rated power; the smaller the travel
speed, the larger the traction force or drawbar pull will be. On the contrary, the larger the travel speed, the
smaller the drawbar pull.
b) Gear-shifting
Gear-shifting is effected to determine the optimum drawbar pull and travel speed required for
accomplishing a given job. Therefore, a machine has several gears to be selected by shifting for the
optimum travel speed.
The table below gives the drawbar pull and travel speeds of a direct-drive type bulldozer.
15B-4
Hauling Performance of EARTHMOVING
Construction Machines DATA
The rated drawbar pull is such a traction force that can be developed at the rated engine power and the
rated revolutions (rpm). The rated drawbar pull is normally estimated by taking into account the travelling
resistance (which will be explained later) and the mechanical loss of power in its line from the engine to the
sprockets.
The maximum drawbar pull is the maximum traction force that can be developed by a machine and is
estimated from the maximum engine torque. In other words, the maximum drawbar pull of a machine can
be developed by the lugging ability of its prime mover and is practically obtained in a low gear.
Consequently, the maximum drawbar pull is shown only at F1 on the specifications.
USton
drawbar pull are obtained from the combined
ton
kN
performance between the engine and the torque 44 480 48
converter. 40 440 44
Drawbar pull
320 32 F1
28
hauling performance is indicated by curves. The 280 28
graph at right gives the hauling performance 24
240 24
curves of the TORQFLOW-drive type bulldozer. 20
200 20
16 F2
160 16
12
120 12
8 80 8 F3
4 40 4
0 0 0
0 2 4 6 8 10 12 14 16 18 20km/h
0 2 4 6 8 10 12 MPH
Travel speed
1. What are the elements limiting the inherent machine capability or power? These are;
a) Traction between the undercarriage (tracks or wheels) and the road surface.
b) Altitude
Altitude in b) will be described in a separate issue and herein is examined the problem of traction
between the undercarriage and the road surface.
"When a motor vehicle cannot be moved due to slipping on the snow-covered road, what should be done
to move the vehicle?"
The answers are;
Solution Reason
(1) Add load to the driving wheels.
⇒
The traction force is increased with the added
load.
(2) Install chain to the wheel tires or replace
the tires with the spiked type. ⇒
The undercarriage is made so as to develop more
traction.
(3) Scatter sand or spread straw mats on the The critical traction force is increased by the
road surface. ⇒
higher coefficient of traction.
The above facts can also be applied to a crawler tractor. Now, let us look at the coefficient of cohesion and
the critical traction force or traction used in the above table.
The critical traction is the maximum traction available depending on the cohesive condition of the road
surface. This can be estimated by the following formula.
15B-5
Hauling Performance of EARTHMOVING
Construction Machines DATA
Fd = µd•Gd
Where, Fd : Critical traction (kg)
µd : Coefficient of traction
Gd : Weight imposed on the driving wheels (kg)
The coefficient of traction depends on the condition of the road surface. Any applicable coefficient of
traction can be selected from among those given in the table below.
Weight to be imposed on the driving wheels can be determined by referring to the table below
Crawler type tractor 2-wheel drive machine 4-wheel drive machine
Weight imposed on
Total weight of tractor the driving wheels Total weight of tractor
Example (1) Assume that the D155 tractor pulling a towed compactor must do compaction in a dry,
loose terrain. What is the critical drawbar pull?
Solution: The operating weight of the D155 tractor is 26730 kg. Then, Fd = 0.60 × 26730 = 16040 kg
Example (2) What are the values of the drawbar pull which the D50A-15 bulldozer can develop at F1
and F2 in a dry, loose terrain?
Solution: The operating weight of the D50A-15 bulldozer is 11400 kg. Its critical drawbar pull is
11400 × 0.60 = 6840 kg.
The rated drawbar pull indicated in its specifications is 8280 kg at F1 or 5920 kg at F2.
Consequently
at F1: The rated drawbar pull is 8280kg, but the tracks will start shoe slip at the
drawbar pull beyond 6840kg, making it impossible for its drawbar pull to be
utilized to the full. Thus, the critical drawbar pull practically available is 6840
kg.
at F2: The rated drawbar pull is 5920kg. Thus, the drawbar pull can be utilized to
the full.
15B-6
Hauling Performance of EARTHMOVING
Construction Machines DATA
MACHINE CAPABILITIES REQUIRED FOR EARTHMOVING OPERATIONS
1. What are the elements limiting the machine capabilities required for earthmoving operations?
When a truck is traveling on the road or going uphill, the following phenomena will be encountered as a
matter of course.
2. Rolling resistance
When a vehicle is traveling on the ground or road, the retarding force of ground against wheels or tracks
should take place. Such a resistance varies depending on the ground or road surface conditions.
The rolling resistance is measured in the ratio to the vehicle weight and can be estimated by the following
formula.
Wr = µr•G
The coefficient of rolling resistance can be selected from among those given in the table below, according
to the ground or road surface conditions.
The coefficient of rolling resistance can be selected from among those given in the table below, according
to the ground or road surface conditions.
µr (%)
Type and conditions of ground Vehicle w/iron wheel Tractor w/pneumatic
treads Crawler tractor tires wheels
Iron truck 1.0
Concrete floor 2.0 2.8 2.3
Macadam road 2.9 3.3 2.8
Wood pavement 2.5
Dry unpaved plain road 4.5 4.6 3.5
Firm terrain 10.0 5.5 4.0
Dry, loose terrain 11.5 6.5 4.5
Soft terrain 16.0 8.0 9.0
Loose gravel 15.0 9.0 12.0
Loose sand 15.0 9.0 12.0
Muddy ground 12.0 16.0
Packed snow 3.7
Ice 2.0
In a crawler tractor, too, the rolling resistance should vary depending on the type of applied soil. The
representative values of rolling resistance, however, are taken into account in preparing the curves for
drawbar pull and hauling performance of crawler tractors. Therefore, the varying rolling resistance may
practically be ignored.
15B-7
Hauling Performance of EARTHMOVING
Construction Machines DATA
Example (3) What is the rolling resistance of the D85-12 tractor to pull the RS12 scraper (empty).
The ground surface is in a soft terran.
Example (4) What is the rolling resistance of the D155 tractor to pull the RS24 scraper loaded full.
The ground surface is in a dry loose terran.
3. Grade resistance
The grade resistance is the retarding force of gravity to be encountered when a vehicle is going uphill.
The grade resistance can be estimated by the following formula.
Ws= G•sin α
a
Where, Ws : Grade resistance (kg) b
Ws
G : Operating weight of a vehicle (kg)
α : Angle formed with the horizon (degree) G
FVBH0041
A grade (degree) and sin α can be selected from among those given in the table below.
Example (5) What is the grade resistance against the D50A-15 angledozer going uphill at 15° ?
Solution: The operating weight of the D50A-15 angledozer is 11400 kg. Thus, the grade resistance
will be 11400 × 0.259=2950 kg
4. Hauling resistance
The hauling resistance is the grand total of the rolling resistance, grade resistance, accelerating resistance
and air resistance. However, construction machines are slow in the travel speed. Normally, the hauling
resistance of construction machines may be considered to be the total of the rolling resistance and grade
resistance.
The grade resistance acts so as to retard the uphill traveling of a vehicle, whereas the grade resistance
acts so as to accelerate the downhill traveling. The above relationships can be indicated as follows:
15B-8
Hauling Performance of EARTHMOVING
Construction Machines DATA
Example (6) What is the hauling resistance against the D60-6 tractor going uphill at 4° in a dry, loose
terrain, while pulling an RS08 scraper with maximum load?
Solution: The gross weight of the RS08 with maximum load is 18870 kg.
The rolling resistance factor is 0.045. Thus, the rolling resistance is 0.045 × 18870 = 850
kg
The weight of the D60-6 tractor is 12550 kg.
The gross weight of the RS08 is 18870 kg.
Then, the total weight of both machines is 31420 kg
Consequently, the grade resistance is 0.07 × 31420 = 2200 kg.
Thus, the hauling resistance is 850 + 2200 = 3050 kg.
2. Application
Example (7) Assume that the D65 tractor is used to pull a wheeled wagon (the empty weight: 17
tons) with a 50-ton load in a dry, loose terrain.
What are the operating gears and the corresponding approx. travel speeds available on
a flat, level ground? What is the degree of a hill climbable under the same condition?
15B-9
Hauling Performance of EARTHMOVING
Construction Machines DATA
Operating gears and travel speeds on flat,
kg x 103
level ground
lb x 103
kN
From the hauling performance curves below, the 240
52
24
200 44 20
approx. 9.0 km/h at F3 or
180 40 F1
approx. 6.0 km/h at F2
18
160 36
16
Drawbar pulI
32
140 14
28
120 12 F2
24
100 10
20
80 8
16
60 6
12
40 4 F3
8
20 4 2
0 0 0
0 2 4 6 8 10 12 14 km/h
0 2 4 6 8 MPH
Travel speed
Tractor weight + wagon weight + pay load = 12750 + 17000 + 50000 = 79750 kg
The grade resistance retarding per angle of grade is 79750 × 0.018 = 1435 kg
Consequently,
The explanations made so far on the travelling or hauling performance of construction machines pertain only
to the traveling of individual machines and the pulling of towed vehicles by tractors. For instance where a
tractor pulls a scraper, it can be judged whether the tractor can be used for this purpose, but it can not be
determined whether the tractor can perform a digging or a loading operation under the same conditions as
mentioned above. Operators or field-superintendents are requested to keep it in mind that such a judgement
should be based on the operators' accumulated experiment or on the reference for such operating
combinations or cooperation among towing tractors and towed vehicles as recommended by KOMATSU.
15B-10
Hauling Performance of EARTHMOVING
Construction Machines DATA
TRAFFICABILITY
Operating efficiency of a construction machine depends largely on the ground surface on which the ma-
chine travels. In clay, loam or clayey soil high in water or moisture content, the bearing force of soil is low and
a ''kneading'' phenomenon is liable to occur. Consequently, there are cases where a construction machine
cannot be operated because of the type and conditions of soil. The degree of the traveling capability of a
construction machine is called the traffic-ability.
In general, traffic-ability is indicated by a cone index No. (The method of measuring a cone index No. will be
described later.)
The larger the cone index number becomes, the higher the traffic-ability of the machine will become. In other
words, on the soil larger in cone index No., a construction machine will be able to travel easier.
The minimum cone index numbers required for various types of construction machines to perform digging,
hauling operations, etc. are given below.
NOTE:
Cone index Type of construction machine Ground pressure In determining a cone index, apply
No. (kg/cm2) the cone penetrometer at 3 or 4
Below 2 Ultra swamp bulldozer (PL class) 0.15 ~ 0.25 points at least to average the
2 to 4 Swamp bulldozer (P Class) 0.2 ~ 0.3 variations in the measured values.
4 to 5 Small-size bulldozer (D20 ~ D31) 0.3 ~ 0.6
Medium-size bulldozer Handle
5 to 7 (D41~D75S) 0.6 ~ 0.8
Strrain ring for
7 to 10 Large-size bulldozer 0.7 ~ 1.5 resistance
(D85 ~ D575) & towed scraper Measurement
10 to 13 Motor scraper
15 & more Dump truck Steel rod
Cone FVBH0042
15B-11
Machines and Site Planning EARTHMOVING
DATA
1. Blasting and bench width
Minimum bench width should be at least twice the cutting face height.
15 m (49'3") or less
bench width
15B-12
Machines and Site Planning EARTHMOVING
DATA
3. Haul road planning
3.1 Dump truck width and haul road size
The width dump truck haul road must have sufficient room to accommodate the model of dump truck
planned for use on the site.
In order to accommodate one lane in each direction, with trucks going 30 km/h (18.6 MPH), the
haul road must be at least four times the truck width
Ditch
Truck Truck
width width
Center
crearance (B)
Shoulder Shoulder
(A) (C)
Width in
use
Total
width
Center clearance (B) Downhill shoulder (A) Uphill shoulder (C) Total road width
Model Speed km/h (MPH)
m (ft.in) m (ft.in) m (ft.in) m (ft.in)
HD255-5 20 (12.4) 2.0 (6'7") 2.0 (6'7") 1.0 (3'3") 11.4 (37'5")
Truck width 30 (18.6) 2.5 (8'2") 2.0 (6'7") 1.5 (4'11") 12.4 (40'8")
3.2 m (10'6") 40 (24.9) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 12.9 (42'4")
HD325-6 20 (12.4) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 13.8 (45'3")
Truck width 30 (18.6) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 14.9 (48'11")
3.7 m (12'2") 40 (24.9) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 15.9 (52'2")
HD405-6 20 (12.4) 3.0 (9'10") 2.0 (6'7") 1.5 (4'11") 13.8 (45'3")
Truck width 30 (18.6) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 14.9 (48'11")
3.7 m (12'2") 40 (24.9) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 15.9 (52'2")
HD465-7 20 (12.4) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 15.9 (52'2")
Truck width 30 (18.6) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 16.9 (55'5")
4.2 m (13'9") 40 (24.9) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 17.9 (58'9")
HD605-7 20 (12.4) 3.0 (9'10") 3.0 (9'10") 1.5 (4'11") 15.9 (52'2")
Truck width 30 (18.6) 3.5 (11'6") 3.0 (9'10") 2.0 (6'7") 16.9 (55'5")
4.2 m (13'9") 40 (24.9) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 17.9 (58'9")
HD785-5 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (4'11") 20.9 (68'7")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (6'7") 22.4 (73'6")
5.7 m (18'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (8'2") 23.4 (76'9")
HD985-3 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 20.9 (68'7")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 22.4 (73'6")
5.7 m (18'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 23.4 (76'9")
HD1200-1 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.1 (72'6")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 23.6 (77'5")
6.3m (20'8") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 24.6 (80'9")
HD1500 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.7 (74'6")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 24.2 (79'5")
6.62 m (21'9") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 25.2 (82'8")
15B-13
Machines and Site Planning EARTHMOVING
DATA
Center clearance (B) Downhill shoulder (A) Uphill shoulder (C) Total road width
Model Speed km/h (MPH)
m (ft.in) m (ft.in) m (ft.in) m (ft.in)
630E 20 (12.4) 3.5 (11'6") 3.5 (11'6") 2.5 (8'2") 22.8 (74'10")
Truck width 30 (18.6) 4.0 (13'1") 4.5 (14'9") 2.5 (8'2") 24.3 (79'9")
6.65 m (21'10") 40 (24.9) 4.5 (14'9") 4.5 (14'9") 3.0 (9'10") 25.3 (83'0")
730E 20 (12.4) 3.5 (11'6") 4.0 (13'1") 2.5 (8'2") 24.5 (80'5")
Truck width 30 (18.6) 4.0 (13'1") 5.0 (16'5") 2.5 (8'2") 26.0 (85'4")
7.25 m (23'9") 40 (24.9) 4.5 (14'9") 5.0 (16'5") 3.0 (9'10") 27.0 (88'7")
830E 20 (12.4) 3.5 (11'6") 4.0 (13'1") 2.5 (8'2") 24.5 (80'5")
Truck width 30 (18.6) 4.0 (13'1") 5.0 (16'5") 2.5 (8'2") 26.0 (85'4")
7.26 m (23'10") 40 (24.9) 4.5 (14'9") 5.0 (16'5") 3.0 (9'10") 27.0 (88'7")
930E-3 20 (12.4) 4.0 (13'1") 4.0 (13'1") 2.5 (8'2") 27.9 (91'6")
Truck width 30 (18.6) 4.5 (14'9") 5.0 (16'5") 2.5 (8'2") 29.4 (96'6")
8.69 m (20'6") 40 (24.9) 5.0 (16'5") 5.0 (16'5") 3.0 (9'10") 30.4 (99'9")
15B-14
CONTENTS
INDEX
SECTION 16
OWNING &
OPERATING COSTS
CONTENTS
Estimation of the owning & operating costs:
Owning cost ..........................................................16-2
Operating cost ......................................................16-4
Example of calculation .........................................16-6
Application and operating conditions table .......16-9
Fuel consumption ................................................... 16-11
Lubricant consumption ..........................................16-18
Tire life .....................................................................16-22
Optimum Fleet Recommendation (OFR)
software program ....................................................16-23
Komatsu information on reliability
and durability ..........................................................16-24
16-1
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
ESTIMATION OF THE OWNING & OPERATING COSTS
Along with the trend for mechanization adopted for economical and satisfactory job accomplishment,
equipment costs now occupy a large proportion of the overall construction cost. Therefore, the estimation of
the equipment costs has become more important. Success or failure in a contract for a construction job is
virtually dependent on the estimates of the equipment costs. In other words, careful consideration of the
equipment costs is of prime importance, if a contractor is to fulfill the contract at a profit. Unless estimates are
made properly, there will occur cases where a construction job cannot be accomplished at a profit.
1. OWNING COST
The equipment owning cost is the expense required, as a matter of course, for the purchase and
possession of the equipment as a property of its owner and consists of the following two items.
(1) Depreciation
(2) Interest, insurance and taxes
1-1.DEPRECIATION
In general, depreciation is a tax term referring to the legally permitted decline in value from the original
purchase price of equipment, and is an assessable property (expressed in units of years). Depreciation
referred to herein is a business practice for conserving the investment in the form of purchased
equipment, in other words, for making preparations in a systematic manner for the fund necessary for
replacing the existing equipment with new or any other equipment.
Net Depreciation Value
Depreciation =
Depreciation Period in Hours
Net depreciation value means Original purchase price minus Resale or Trade-in price.
The depreciation period varies considerably according to the equipment operating conditions. It is also
affected by the speed of fund collection desired by the user, environmental and economic conditions in
its applied territory. Furthermore, it goes without saying that maintenance of equipment is a significant
16-2
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
factor in determining the economical life of the equipment. Proper maintenance will extend the life of
equipment. On the other hand, poor or improper maintenance will shorten the life. There is the legal
depreciation period in each country for tax purpose. However, in the business, it is rather usual to
employ the equipment owning period as the depreciation period. The equipment owning period is
strongly affected by the economical life of the equipment (Years or hours for which the equipment can
be used gainfully).
When you need to estimate the value of the economical life for a specific product, please consult your
distributor or Komatsu representative. They can suggest you with the appropriate values from their
experience and the data they have. (The former handbook contained the depreciation period, but they
are removed because the straight numbers sometimes mislead the readers.)
The net depreciation value is the net amount to be considered in the depreciation of equipment.
In case of crawler-type tractors, their purchase prices are used to calculate the net depreciation value.
In wheel type equipment, their tire values should be deducted from the purchase prices, because,
unlike the undercarriages of crawler-type equipment, tires wear out earlier than the equipment chassis
proper, and tires are not cheap. Further, there is a possibility of tires becoming unserviceable suddenly
in unexpected accidents. Hence, it is necessary in tire depreciation to include their degrees of wear into
the operating cost.
Some users will hope that in terms of book value the machine will depreciate completely within the
depreciation period. Other users will hope that the residual value expressed as resale value or trade-in
value will be left. For these users the resale value or trade-in value is an important factor in reducing the
capital invested. This value is also a factor when deciding to purchase a new machine.
The resale value or trade-in value changes greatly according to the territory. Therefore the conditions in
that territory must be considered when determining these values. However, major factors in deciding
resale value or trade-in value are the hours of operation, nature of work and working environment. The
real resale value or trade-in value cannot be decided simply, but when a realistic value is decided it is
subtracted from the purchase price to give the Net Depreciation value. It is then possible to obtain the
depreciation from the Net Depreciation Value.
Insurance and taxes are imposed on the annual residual values of the equipment, which requires
knowledge of depreciation as prescribed by the tax law. The depreciation rate or the depreciation
period (whether it is a fixed amount or a fixed rate) vary according to the country. For the correct values
of insurance and taxes on the residual value in a country, the calculation formulas established in that
country must be used.
Interest, insurance and taxes are imposed on the residual value that is the difference between the
purchase price and the depreciated amount. This residual value decreases every year. However, when
the user calculates owning & operating costs, it is convenient to consider interest, insurance and taxes
as a constant amount paid out each year. For this reason, the machine will be considered here to
depreciate by a constant annual amount. A calculation is made of the average value of the residual
value at the beginning of each year within the depreciation period, and interest, insurance and taxes are
imposed on this value. By dividing this value by the number of hours the user expects to operate the
machine in one year, the hourly value can be calculated.
The annual rates are the total of those of interest, insurance and tax.
The factor can be obtained by using Table 1 or can be calculated by the following formula.
(n – 1) (1 – r)
Factor = 1 –
2n
16-3
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
where n: Depreciation period
Machine worth at trade-in or resale time
r: Trade-in value rate =
Delivered price
(Example)
Delivered price: $100,000 Annual rates: 15% Annual use in hours: 2,000 hrs
Trade-in value: $25,000 Depreciation period (n) : 4 years
(4 – 1) (1 – 0.25) 0.95
Factor = 1 – = 0.72
2× 4 ye
ar
s
0.90 in
d
rio
pe
When obtaining the factor by using Table 1. ecia
n
tio n=2
0.85 pr
Enter r = 0.25 in Table 1
e
)
:D 3
(n–1) (1–r)
n
n=
2n
Applicable factor is 0.72 0.75
4
Factor (1-
n=
0.72 × $100,000 × 0.15
5
n=
0.72
6
n=
7
n=
0.65
2. OPERATING COST
8
n=
The equipment operating costs are proportional to the time that the 0.60
2-1. FUEL
More definite fuel consumption data should be measured in the field.
It is possible, however, to anticipate the actual or approximate consumption values according to the
actual operating conditions without measuring the consumption. Table 3 gives the hourly fuel
consumption values for KOMATSU construction machines. In this table, the average values are given,
provided that the job conditions are classified into three different ranges of application. If a user has
data on certain operating conditions, more correct or realistic values will be obtained by applying these
data in similar operating conditions, provided that the equipment is limited to the same type as that
used in the user's data.
To estimate hourly fuel cost, select the job condition based on application and find hourly fuel
consumption.
Hourly fuel cost = Hourly fuel consumption × Local unit price of fuel
2-2. LUBRICANTS (OIL AND GREASE), FILTERS AND PERIODIC MAINTENANCE LABOR
It is possible to measure the consumption of lubricants and grease in the same manner as the fuel
consumption. The consumption values of lubricants and grease are also obtained by calculation on the
basis of lubrication intervals, but they are affected greatly by the type of machines and their operating
conditions, which makes it difficult to specify the consumption suited for various machines and their
operating conditions. Hence, Table 4 gives the average consumption on the data obtained in the past,
which is available for your reference.
Prices of lubricants vary in countries or areas and, therefore, the local price (price in that country or
area) should be used.
In KOMATSU construction machines, filter replacement intervals are standardized for each machine
model. Thus, the cost of filter can be calculated from the local price of filter and the replacement
interval. The hourly filter cost is the total of the hourly costs for each type of filter.
16-4
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
(Example)
Number of filters A × Local price of filter
Hourly cost of filter A = A
The same method is used for calculating the hourly filter cost of other filters. For quick estimation,
hourly filter costs are about 50% of hourly lubricant costs. If they are used in the dusty terrain, the
calculated value should be multiplied by a proper factor.
If necessary, we suggest you to contact the local Komatsu distributor with necessary
information to get the assistance for estimating them.
2-3. TIRES
As has been described in Depreciation, tires are in the category of consumable parts and tires are
generally expensive. Therefore, it is better to include the tire cost as an individual item in the operating
costs. Tire cost is calculated by the following formula.
Tire price
Hourly tire cost =
Estimated life
As tire prices vary in each country or area, the price of tires actually bought by a user should be applied.
It is difficult to indicate definitely the tire life, because the tire life is affected by many factors. However,
the general measurements for the life expectancy of tires can be indicated on the basis of past
experience and data obtained from the tire manufacturers. Refer to Table 4.
In this table, the approximate life values are given for three different types of conditions. The optimum
value for a certain ground condition is one of those obtained by a user in experience on similar ground
conditions. When recapped tires are to be used, their prices and life expectancy must be changed
correspondingly.
16-5
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
3. EXAMPLE OF CALCULATION
PC200 is delivered for $92,811 at a job site.
Applications:
Mass excavation or trenching where machine digs all the time in natural bed clay soils. Some traveling and
steady, full throttle operation.
Net Depreciation Value
Since the machine is a crawler-type, tires are not involved. This owner knows from experience that at trade-in
time, the machine will be worth approximately 10% of its delivered price 4 years from now.
Trade-in value is $9,281
Net depreciation value = $92,811 – $9,281 =$83,530
OWNING COST
Depreciation:
Putting 10,000 hours as the example depreciation period.
$83,530
Depreciation = = $8.35
10,000
Calculate the Factor according to depreciation period and trade-in value rate, which is 0.66.
Enter the annual rates of interest, insurance and taxes and total them, which is 0.14 as an example.
0.66 × $92,811 × 0.14
Interest, insurance, taxes cost = = $3.43
2,500
Add up the depreciation cost and interest, insurance, taxes cost for total owning.
OPERATING COST
Fuel: See Table 3.
The intended application is in medium range. The estimated fuel consumption from table is 12.5 liter/hour.
Cost of fuel in this area is $0.2/liter.
Consumption × Unit cost = 12.5 liter/hr × $0.2/liter = $2.5
Repair Cost
Use local Komatsu distributor’s estimation. (For calulation example: use $3.30)
Repairs = $3.30
Since the machine does not have fast wear parts like ripper points of bulldozer or cutting edge of motor
grader, special item can be disregarded.
Operator hourly wage in this area is $16.00.
Add up the fuel cost, lubricant grease filter costs, repair cost and operator's hourly wage for operating cost.
16-6
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
EXAMPLE
16-7
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
BLANK SHEET
16-8
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
The following tables show application and operating conditions in three categories.
Condition 1 is the light duty for machine, conditions 2 is the average and Condition 3 is the severe duty. It is
the guide line and can be used with fuel and tire life tables to assist to select fuel and tire costs.
Table 2-1 Application and Operating Conditions
Condition 1 Condition 2 Condition 3
Crawler type tractors • Pulling scrapers, • Digging, dozing, ripping of • Digging, dozing, ripping of
agricultural implements. soft rock, clay, most hard rock.
• Spreading work. material.
• Scraper pushing
• Skidding
• Land clearing
Dozer shovels • Loading of light material • Continuous loading from • Bank excavation and
from stock pile with stock pile. loading.
substantial Idle time. • Light excavation and • Loading of blasted
loading. material.
Hydraulic excavators • Slope finishing, light • Mainly excavating and • Excavation of hard bank.
material digging, and loading.
other light-duty operation. • Breaker operation.
Motor graders • Finishing and other light- • Mainly road maintenance, • Maintenance or repair of
duty operations. repair and construction. hard surface road,
• Snow removal remarkable scarifying and
or ripping operation.
Wheel loaders • Loading of light material • Continuous loading from • Bank excavation and
from stock pile stock pile loading.
• Operation with substantial • Light-duty excavation and • Loading of blasted rock.
truck waiting time. loading.
Wheel dozers • Light surface finishing • Average surface finishing • Digging and dozing hard
• Spreading light material • Digging and dozing soft earth
earth
16-9
Estimation of The Owning & OWNING &
Operating Costs OPERATING COSTS
Table 3 Hourly Fuel Consumption
Construction
(1) Bulldozers
Range Low Medium High
Amount U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr.
Machine
D21A, P-8 0.50 ~ 1.0 1.9 ~ 3.9 1.0 ~ 1.5 3.9 ~ 5.8 1.5 ~ 2.0 5.8 ~ 7.7
D31EX, PX-21 0.9 ~ 1.8 3.4 ~ 6.8 1.8 ~ 2.7 6.8 ~ 10.2 2.7 ~ 3.6 10.2 ~ 13.6
D37EX, PX-21 1.0 ~ 2.0 3.7 ~ 7.4 2.0 ~ 2.9 7.4 ~ 11.1 2.9 ~ 3.9 11.1 ~ 14.8
D39EX, PX-21 1.1 ~ 2.1 4.1 ~ 8.1 2.1 ~ 3.2 8.1 ~ 12.2 3.2 ~ 4.3 12.2 ~ 16.2
D41E, P-6 1.3 ~ 2.5 4.8 ~ 9.6 2.5 ~ 3.8 9.6 ~ 14.4 3.8 ~ 5.1 14.4 ~ 19.2
D61EX, PX-15 1.8 ~ 3.6 6.7 ~ 13.5 3.6 ~ 5.3 13.5 ~ 20.2 5.3 ~ 7.1 20.2 ~ 27.0
D65E, P-12 2.1 ~ 4.1 7.8 ~ 15.6 4.1 ~ 6.2 15.6 ~ 23.4 6.2 ~ 8.2 23.4 ~ 31.1
D65EX, PX, WX-15 2.1 ~ 4.2 7.9 ~ 15.8 4.2 ~ 6.3 15.8 ~ 23.7 6.3 ~ 8.4 23.7 ~ 31.7
D65EX, PX. WX-15E0 2.1 ~ 4.1 7.8 ~ 15.7 4.1 ~ 6.2 15.7 ~ 23.5 6.2 ~ 8.3 23.5 ~ 31.4
D85E-SS-2A 2.2 ~ 4.4 8.4 ~ 16.8 4.4 ~ 6.7 16.8 ~ 25.2 6.7 ~ 8.9 25.2 ~ 33.6
D85EX, PX-15 2.5 ~ 5.1 9.6 ~ 19.2 5.1 ~ 7.6 19.2 ~ 28.8 7.6 ~ 10.1 28.8 ~ 38.4
D85EX, PX-15E0 2.5 ~ 5.1 9.6 ~ 19.2 5.1 ~ 7.6 19.2 ~ 28.8 7.6 ~ 10.1 28.8 ~ 38.4
D155A-5 3.3 ~ 6.6 12.4 ~ 24.8 6.6 ~ 9.8 24.8 ~ 37.2 9.8 ~ 13.1 37.2 ~ 49.6
D155AX-5 3.4 ~ 6.7 12.7 ~ 25.4 6.7 ~ 10.1 25.4 ~ 38.2 10.1 ~ 13.4 38.2 ~ 50.9
D155AX-6 3.3 ~ 6.6 12.5 ~ 25.0 6.6 ~ 9.9 25.0 ~ 37.5 9.9 ~ 13.2 37.5 ~ 50.0
D275A, AX-5 7.7 ~ 10.9 29.2 ~ 41.3 10.9 ~ 14.1 41.3 ~ 53.5 14.1 ~ 17.4 53.5 ~ 65.7
D275A, AX-5E0 7.7 ~ 10.9 29.2 ~ 41.3 10.9 ~ 14.1 41.3 ~ 53.5 14.1 ~ 17.4 53.5 ~ 65.7
D375A-5 10.6 ~ 15.0 40.2 ~ 56.9 15.0 ~ 19.5 56.9 ~ 73.7 19.5 ~ 23.9 73.7 ~ 90.4
D375A-5E0 10.3 ~ 14.6 39.0 ~ 55.3 14.3 ~ 18.9 55.3 ~ 71.5 18.9 ~ 23.2 71.5 ~ 87.8
D475A-5, -5SD, 15.5 ~ 21.9 58.5 ~ 82.9 21.9 ~ 28.3 82.9 ~ 107.3 28.3 ~ 34.8 107.3 ~ 131.7
D475-5, -5SDE0
D575A-3 20.2 ~ 28.7 76.6 ~ 108.5 28.7 ~ 37.1 108.5 ~ 140.4 37.1 ~ 45.5 140.4 ~ 172.3
D575A-3SD 22.0 ~ 31.2 83.4 ~ 118.1 31.2 ~ 40.4 118.1 ~ 152.9 40.4 ~ 49.6 152.9 ~ 187.6
Low: Work where machine spend most of daily working hours idling or traveling with no load.
Medium: Average earth moving, scraper hauling, easy pushing.
Object materials; Not hard to dig
High: Ripping, heavy pushing.
Continuous use with engine at full throttle.
Object materials; Blasted rock.
(2) Pipelayers
Range Low Medium High
Amount U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr. U.S. Gal/hr. ltr./hr.
Machine
D85C-21 2.4 ~ 3.2 9 ~ 12 3.4 ~ 4.2 13 ~ 16 4.2 ~ 5.0 16 ~ 19
D155C-1 3.4 ~ 4.5 13 ~ 17 5.3 ~ 6.3 20 ~ 24 6.9 ~ 7.9 26 ~ 30
D355C-3 4.2 ~ 5.3 16 ~ 20 5.8 ~ 6.9 22 ~ 26 7.4 ~ 8.5 28 ~ 32
16-10
Fuel Consumption OWNING &
OPERATING COSTS
Construction
(3) Hydraulic excavators
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
PC20MR-2 0.21 ~ 0.29 0.8 ~ 1.1 0.29 ~ 0.45 1.1 ~ 1.7 0.45 ~ 0.77 1.7 ~ 2.9
PC27MR-2 0.29 ~ 0.42 1.1 ~ 1.6 0.42 ~ 0.61 1.6 ~ 2.3 0.61 ~ 1.03 2.3 ~ 3.9
PC30MR-2 0.34 ~ 0.48 1.3 ~ 1.8 0.48 ~ 0.74 1.8 ~ 2.8 0.74 ~ 1.22 2.8 ~ 4.6
PC35MR-2 0.37 ~ 0.50 1.4 ~ 1.9 0.50 ~ 0.77 1.9 ~ 2.9 0.77 ~ 1.29 2.9 ~ 4.9
PC40MR-2 0.58 ~ 0.82 2.2 ~ 3.1 0.82 ~ 1.24 3.1 ~ 4.7 1.24 ~ 2.06 4.7 ~ 7.8
PC50MR-2 0.50 ~ 0.71 1.9 ~ 2.7 0.71 ~ 1.08 2.7 ~ 4.1 1.08 ~ 1.80 4.1 ~ 6.8
PC78US-6, PC78MR-6 0.63 ~ 0.90 2.4 ~ 3.4 0.90 ~ 1.4 3.4 ~ 5.2 1.4 ~ 2.3 5.2 ~ 8.6
PC120-6, PC130-6 1.1 ~ 1.6 4.1 ~ 5.9 1.6 ~ 2.3 5.9 ~ 8.8 2.3 ~ 3.9 8.8 ~ 14.6
PC130-7 1.1 ~ 1.6 4.1 ~ 5.9 1.6 ~ 2.3 5.9 ~ 8.8 2.3 ~ 3.9 8.8 ~ 14.6
PC138US-2, PC138USLC-2 1.1 ~ 1.6 4.1 ~ 5.9 1.6 ~ 2.3 5.9 ~ 8.8 2.3 ~ 3.9 8.8 ~ 14.6
PC160LC-7 1.2 ~ 1.8 4.7 ~ 6.8 1.8 ~ 2.7 6.8 ~ 10.1 2.7 ~ 4.5 10.1 ~ 16.9
PC200, LC-7 1.6 ~ 2.4 6.2 ~ 8.9 2.4 ~ 3.5 8.9 ~ 13.4 3.5 ~ 5.9 13.4 ~ 22.3
PC200, LC-8 1.6 ~ 2.2 5.9 ~ 8.5 2.2 ~ 3.4 8.5 ~ 12.7 3.4 ~ 5.6 12.7 ~ 21.2
PC220, LC-7 2.0 ~ 2.9 7.5 ~ 10.8 2.9 ~ 4.3 10.8 ~ 16.2 4.3 ~ 7.1 16.2 ~ 26.9
PC220, LC-8 1.9 ~ 2.7 7.1 ~ 10.3 2.7 ~ 4.1 10.3 ~ 15.4 4.1 ~ 6.8 15.4 ~ 25.6
PC228US, USLC-3E0 1.7 ~ 2.4 6.3 ~ 9.0 2.4 ~ 3.6 9.0 ~ 13.5 3.6 ~ 5.9 13.5 ~ 22.5
PC240LC,NLC-8 1.9 ~ 2.7 7.3 ~ 10.4 2.7 ~ 4.1 10.4 ~ 15.6 4.1 ~ 6.9 15.6 ~ 26.0
PC270, LC-7 2.1 ~ 3.1 8.1 ~ 11.6 3.1 ~ 4.6 11.6 ~ 17.4 4.6 ~ 7.7 17.4 ~ 29.0
PC270, LC-8 2.1 ~ 3.1 8.1 ~ 11.6 3.1 ~ 4.6 11.6 ~ 17.4 4.6 ~ 7.6 17.4 ~ 28.9
PC300, LC-7, PC350, LC-7 2.9 ~ 4.1 10.8 ~ 15.4 4.1 ~ 6.1 15.4 ~ 23.1 6.1 ~ 10.2 23.1 ~ 38.5
PC300, LC-7E0, PC350, 2.8 ~ 4.0 10.6 ~ 15.2 4.0 ~ 6.0 15.2 ~ 22.8 6.0 ~ 10.0 22.8 ~ 37.9
LC-7E0
PC400, LC-7, PC450LC-7 5.1 ~ 6.8 19.3 ~ 25.7 6.8 ~ 8.5 25.7 ~ 32.1 8.5 ~ 12.7 32.1 ~ 48.2
PC400, LC-7E0, PC450, 5.1 ~ 6.8 19.3 ~ 25.7 6.8 ~ 8.5 25.7 ~ 32.1 8.5 ~ 12.7 32.1 ~ 48.2
LC-7E0
PC600, LC-7 6.2 ~ 8.2 23.4 ~ 31.2 8.2 ~ 10.3 31.2 ~ 39.0 10.3 ~ 16.5 39.0 ~ 62.4
PC600, LC-8 6.6 ~ 8.8 24.9 ~ 33.2 8.8 ~ 11.0 33.2 ~ 41.5 11.0 ~ 17.6 41.5 ~ 66.5
PC750, LC, SE-7, PC800, SE-7 6.7 ~ 9.0 25.6 ~ 34.1 9.0 ~ 11.3 34.1 ~ 42.6 11.3 ~ 18.0 42.6 ~ 68.2
PC800, LC, SE-8, PC850, SE-8 6.7 ~ 8.9 25.2 ~ 33.7 8.9 ~ 11.1 33.7 ~ 42.1 11.1 ~ 17.8 42.1 ~ 67.3
PC1250, LC, SP-7 9.5 ~ 12.7 36.0 ~ 48.0 12.7 ~ 15.8 48.0 ~ 59.9 15.8 ~ 25.3 59.9 ~ 95.9
PC1250, LC, SP-8 10.5 ~ 14.0 39.7 ~ 53.0 14.0 ~ 17.5 53.0 ~ 66.2 17.5 ~ 28.0 66.2 ~ 106.0
PC1800-6 13.2 ~ 17.5 49.8 ~ 66.4 17.5 ~ 21.9 66.4 ~ 83.0 21.9 ~ 35.1 83.0 ~ 132.9
Low: Intermittent work with job efficiency less than 65 %.
Material; Easy to excavate
Medium: Digging and loading 65 - 80 % of machine operation hours.
Material; Not easy to excavate
High: Work with job effficiency more than 80 %.
Direct excavation needed sometimes.
16-11
Fuel Consumption OWNING &
OPERATING COSTS
Construction
(4) Off-highway dump trucks
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
HD255-5 3.4 ~ 5.0 12.7 ~ 19.0 5.0~ 6.7 19.0 ~ 25.4 6.7 ~ 9.2 25.4 ~ 34.9
HD325-6 5.2 ~ 7.7 19.5 ~ 29.2 7.7 ~ 10.3 29.2 ~ 39.0 10.3 ~ 14.2 39.0 ~ 53.6
HD325-7 4.8 ~ 7.2 18.0 ~ 27.1 7.2 ~ 9.9 27.1 ~ 37.4 9.9 ~ 13.6 37.4 ~ 51.5
HD405-6 5.2 ~ 7.7 19.5 ~ 29.2 7.7 ~ 10.3 29.2 ~ 39.0 10.3 ~ 14.2 39.0 ~ 53.6
HD405-7 4.8 ~ 7.2 18.0 ~ 27.1 7.2 ~ 9.9 27.1 ~ 37.4 9.9 ~ 13.6 37.4 ~ 51.5
HD465-7 7.3 ~ 11.0 27.8 ~ 41.6 11.0 ~ 14.7 41.6 ~ 55.5 14.7 ~ 20.2 55.5 ~ 76.4
HD465-7E0 7.0 ~ 10.5 26.4 ~ 39.8 10.5 ~ 14.2 39.8 ~ 53.7 14.2 ~ 20.6 53.7 ~ 78.1
HD605-7 7.3 ~ 11.0 27.8 ~ 41.6 11.0 ~ 14.7 41.6 ~ 55.5 14.7 ~ 20.2 55.5 ~ 76.4
HD605-7E0 7.0 ~ 10.5 26.4 ~ 39.8 10.5 ~ 14.2 39.8 ~ 53.7 14.2 ~ 20.6 53.7 ~ 78.1
HD785-5 10.4 ~ 15.6 39.4 ~ 59.2 15.6 ~ 20.8 59.2 ~ 78.9 20.8 ~ 28.7 78.9 ~ 108.5
HD985-5 11.9 ~ 17.9 45.2 ~ 67.8 17.9 ~ 23.9 67.8 ~ 90.3 23.9 ~ 32.8 90.3 ~ 124.2
HD1500-5 13.7 ~ 17.1 51.8 ~ 64.7 17.1 ~ 23.9 64.7 ~ 90.6 23.9 ~ 32.8 90.6 ~ 124.3
730E 19.3 ~ 24.2 73.2 ~ 91.5 24.2 ~ 33.7 91.5 ~ 127.6 33.7 ~ 46.2 127.6 ~ 175.0
830E 24.5 ~ 30.6 92.7 ~ 115.9 30.6 ~ 42.8 115.9 ~ 162.2 42.8 ~ 58.8 162.2 ~ 222.5
930E-3 24.9 ~ 31.1 94.1 ~ 117.6 31.1 ~ 43.5 117.6 ~ 164.7 43.5 ~ 59.7 164.7 ~ 225.8
CONDITIONS:
Low : High ratio of loading time to cycle time, good haul road conditions.
Low truck job efficiency.
Medium : Medium raio of traveling time to cycle time, medium load factor of truck, and medium haul road
conditions and grade.
Total resistance; Over 2 % through 10 %.
High : High raio of traveling time to cycle time, tough load factor of truck, severe haul road conditions
and grade.
Total resistance; 10 % and above.
16-12
Fuel Consumption OWNING &
OPERATING COSTS
Construction
(6) Wheel loaders
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
WA150-5 1.3 ~ 1.8 4.9 ~ 6.9 1.8 ~ 2.3 6.9 ~ 8.7 2.3 ~ 3.0 8.7 ~ 11.4
WA200, PT-5 1.7 ~ 2.4 6.5 ~ 9.1 2.4 ~ 3.0 9.1 ~ 11.4 3.0 ~ 4.0 11.4 ~ 15.1
WA250, PT-5 1.9 ~ 2.7 7.2 ~ 10.1 2.7 ~ 3.4 10.1 ~ 12.7 3.4 ~ 4.4 12.7 ~ 16.7
WA320-5 2.3 ~ 3.2 8.7 ~ 12.1 3.2 ~ 4.0 12.1 ~ 15.3 4.0 ~ 5.3 15.3 ~ 20.1
WA320 custom 2.2 ~ 3.0 8.2 ~ 11.4 3.0 ~ 3.8 11.4 ~ 14.4 3.8 ~ 5.0 14.4 ~ 18.9
WA380-3 2.4 ~ 3.4 9.1 ~ 12.7 3.4 ~ 4.2 12.7 ~ 16.0 4.2 ~ 5.5 16.0 ~ 21.0
WA380-5 2.7 ~ 3.8 10.1 ~ 14.2 3.8 ~ 4.7 14.2 ~ 17.8 4.7 ~ 6.2 17.8 ~ 23.5
WA380-6 2.5 ~ 3.5 9.5 ~ 13.3 3.5 ~ 4.4 13.3 ~ 16.7 4.4 ~ 5.8 16.7 ~ 22.1
WA420-3 3.1 ~ 4.3 11.7 ~ 16.3 4.3 ~ 5.4 16.3 ~ 20.5 5.4 ~ 7.2 20.5 ~ 27.1
WA430-5 3.1 ~ 4.3 11.7 ~ 16.3 4.3 ~ 5.4 16.3 ~ 20.5 5.4 ~ 7.2 20.5 ~ 27.1
WA470-3 3.5 ~ 5.0 13.4 ~ 18.8 5.0 ~ 6.2 18.8 ~ 23.6 6.2 ~ 8.2 23.6 ~ 31.1
WA470-5 3.5 ~ 4.8 13.1 ~ 18.3 4.8 ~ 6.1 18.3 ~ 23.0 6.1 ~ 8.0 23.0 ~ 30.3
WA480-5 3.6 ~ 5.0 13.6 ~ 19.0 5.0 ~ 6.3 19.0 ~ 23.9 6.3 ~ 8.3 23.9 ~ 31.5
WA500-3 5.5 ~ 7.7 20.9 ~ 29.2 7.7 ~ 9.7 29.2 ~ 36.8 9.7 ~ 12.9 36.8 ~ 48.7
WA500-6 5.2 ~ 7.3 19.6 ~ 27.5 7.3 ~ 9.2 27.5 ~ 34.7 9.2 ~ 12.1 34.7 ~ 45.8
WA600-3 8.0 ~ 11.1 30.1 ~ 42.2 11.1 ~ 14.1 42.2 ~ 53.2 14.1 ~ 18.6 53.2 ~ 70.3
WA600-6 8.1 ~ 11.3 30.6 ~ 42.8 11.3 ~ 14.3 42.8 ~ 54.0 14.3 ~ 18.9 54.0 ~ 71.4
WA700-3 10.3 ~ 14.5 39.1 ~ 54.8 14.5 ~ 18.3 54.8 ~ 69.1 18.3 ~ 24.1 69.1 ~ 91.3
WA800-3 11.8 ~ 16.5 44.6 ~ 62.5 16.5 ~ 20.8 62.5 ~ 78.9 20.8 ~ 27.5 78.9 ~ 104.2
WA900-3 12.3 ~ 17.2 46.5 ~ 65.1 17.2 ~ 21.7 65.1 ~ 82.1 21.7 ~ 28.7 82.1 ~ 108.5
WA1200-3 26.4 ~ 37.0 100.1 ~ 140.1 37.0 ~ 46.7 140.1 ~ 176.8 46.7 ~ 61.7 176.8 ~ 233.5
CONDITIONS:
Low : Light utility, work with considerable amount of idling.
Medium : Non-stop operation over a long distance.
Operation according to a basic loader cycle with frequent idling.
High : Non-stop operation according to a basic loader cycle.
16-13
Fuel Consumption OWNING &
OPERATING COSTS
Construction
(8) Motor graders
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
GD511A-1 1.9 ~ 3.1 7.2 ~ 11.6 3.1 ~ 4.2 11.6 ~ 15.9 4.2 ~ 5.4 15.9 ~ 20.3
GD555-3A, 3C 2.3 ~ 3.7 8.8 ~ 14.0 3.7 ~ 5.1 14.0 ~ 19.3 5.1 ~ 6.5 19.3 ~ 24.6
GD611A-1 2.4 ~ 3.8 9.0 ~ 14.5 3.8 ~ 5.3 14.5 ~ 19.9 5.3 ~ 6.7 19.9 ~ 25.3
GD655-3A, 3C 2.7 ~ 4.4 10.4 ~ 16.6 4.4 ~ 6.0 16.6 ~ 22.8 6.0 ~ 7.7 22.8 ~ 29.1
GD661A-1 2.5 ~ 4.1 9.6 ~ 15.4 4.1 ~ 5.6 15.4 ~ 21.2 5.6 ~ 7.1 21.2 ~ 26.9
GD675-3A, 3C 2.9 ~ 4.5 10.8 ~ 17.2 4.5 ~ 6.3 17.2 ~ 23.7 6.3 ~ 8.0 23.7 ~ 30.1
GD705A-4 2.8 ~ 4.4 10.5 ~ 16.8 4.4 ~ 6.1 16.8 ~ 23.1 6.1 ~ 7.8 23.1 ~ 29.4
GD825A-2 3.9 ~ 6.3 14.9 ~ 23.8 6.3 ~ 8.6 23.8 ~ 32.7 8.6 ~ 11.0 32.7 ~ 41.7
CONDITIONS:
Low: Minor road maintenance, leveling, traveling with no load.
Medium: Average road maintenance, scarifying, light snow removal.
High: Heavy pushing, continuous operation.
16-14
Fuel Consumption OWNING &
OPERATING COSTS
Table 3 Hourly Fuel Consumption
Mining
(1) Bulldozers
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
D275A, AX-5 9.3 ~ 12.8 35.2 ~ 48.5 12.8 ~ 17.5 48.5 ~ 66.2 17.5 ~ 21.0 66.2 ~ 79.4
D275A, AX-5E0 9.5 ~ 12.8 35.8 ~ 48.3 12.8 ~ 17.5 48.3 ~ 66.2 17.5 ~ 20.8 66.2 ~ 78.8
D375A-5, -5E0 12.8 ~ 17.7 48.6 ~ 66.9 17.7 ~ 24.1 66.9 ~ 91.2 24.1 ~ 28.9 91.2 ~ 109.4
D475A-5, -5SD 18.0 ~ 24.7 68.0 ~ 93.5 24.7 ~ 33.7 93.5 ~ 127.5 33.7 ~ 40.4 127.5 ~ 153.0
D475A-5E0, ASD-5E0 18.0 ~ 24.7 68.0 ~ 93.5 24.7 ~ 33.7 93.5 ~ 127.5 33.7 ~ 40.4 127.5 ~ 153.0
D575A-3SD 24.0 ~ 33.1 91.0 ~ 125.2 33.1 ~ 45.1 125.2 ~ 170.7 45.1 ~ 54.1 170.7 ~ 204.8
CONDITIONS:
Low : Machine movement is mainly consisting of idle running or traveling unloaded.
Medium : Average earth moving, scraper hauling or easy pushing operation.
Ripping ratio more than 50%.
High : Ripping, heavy pushing, and operation continued without rest at full horspower.
16-15
Fuel Consumption OWNING &
OPERATING COSTS
Mining
(3) Off-highway dump trucks
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
HD785-5 10.4 ~ 18.2 39.4 ~ 69.0 18.2 ~ 23.4 69.0 ~ 88.7 23.4 ~ 30.2 88.7 ~ 114.4
HD1500-5 13.7 ~ 17.1 51.8 ~ 64.7 17.1 ~ 23.9 64.7 ~ 90.6 23.9 ~ 32.8 90.6 ~ 124.3
730E 19.3 ~ 24.2 73.2 ~ 91.5 24.2 ~ 33.8 91.5 ~ 128.0 33.8 ~ 46.4 128.0 ~ 175.6
830E 24.5 ~ 30.6 92.7 ~ 115.9 30.6 ~ 42.9 115.9 ~ 162.2 42.9 ~ 58.8 162.2 ~ 222.4
830E-AC 24.5 ~ 30.6 92.7 ~ 115.9 30.6 ~ 42.9 115.9 ~ 162.2 42.9 ~ 58.8 162.2 ~ 222.4
930E-3 24.9 ~ 31.1 94.1 ~ 117.6 31.1 ~ 43.5 117.6 ~ 164.7 43.5 ~ 59.7 164.7 ~ 225.8
CONDITIONS:
Low : Variable travel times with the majority of the travel time attributed to segments with total
resistance less than 4%. Abnormal operating efficiency with significant periods of wait time or
delays.
Medium : Average travel times with a balance between travel time along routes in excess of 10% total
resistance and routes less than 4% in total resistance. Normal operating efficiency with
occasional periods of wait time or delays.
High : Long travel times with the majority of the travel time attributed to road segments in excess of
10% total resistance. Highly efficient applications with minimum delay or wait periods.
16-16
Fuel Consumption OWNING &
OPERATING COSTS
Mining
(5) Wheel dozers
Range Low Medium High
Amount U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr U.S. Gal/hr ltr./hr
Machine
WD600-3 9.2 ~ 12.9 34.8 ~ 48.8 12.9 ~ 16.2 48.8 ~ 61.5 16.2 ~ 21.6 61.5 ~ 81.7
WD900-3 13.9 ~ 19.5 52.7 ~ 73.8 19.5 ~ 24.6 73.8 ~ 93.1 24.0 ~ 32.5 93.1 ~ 122.9
CONDITIONS:
Low : Cleaning a surface of a hauling road, ground around large shovels and hoppers (collecting fallen
stones).
Medium : Stock pilling. Dozing of crushing rock.
High : Reclamation. Dozing after digging. Pusher using scraper.
16-17
Lubricant Consumption OWNING &
OPERATING COSTS
Table 4 Approx. Hourly Lubricants Consumption
(1) Bulldozers and Dozer shovels
Hydraulic
Application *(1) Crank case *(2) Transmission *(3) Final Drives Grease
Control
Unit Q’TY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
D21A, E, P-8 0.004 0.014 0.007 0.025 0.004 0.016 0.005 0.02 0.04 0.02
D31EX, PX-21 0.008 0.03 — — 0.003 0.01 0.008 0.03 0.04 0.02
D37P-5 0.008 0.03 — — 0.003 0.01 0.008 0.03 0.04 0.02
D37EX, PX-21 0.008 0.03 — — 0.003 0.01 0.008 0.03 0.04 0.02
D39EX, PX-21 0.008 0.03 — — 0.003 0.01 0.008 0.03 0.04 0.02
D41E, P-6 0.021 0.08 0.026 0.1 0.005 0.02 0.011 0.04 0.04 0.02
D61EX, PX-15 0.016 0.06 0.016 0.06 0.003 0.01 0.008 0.03 0.04 0.02
D65E, EX, P, PX-12 0.021 0.08 0.013 0.05 0.013 0.05 0.008 0.03 0.04 0.02
D65EX, PX, WX-15 0.021 0.08 0.013 0.05 0.013 0.05 0.008 0.03 0.04 0.02
D65EX, PX, EX-15E0 0.016 0.06 0.013 0.05 0.013 0.05 0.008 0.03 0.04 0.02
D85E-SS-2A 0.021 0.08 0.013 0.05 0.016 0.06 0.008 0.03 0.04 0.02
D85EX, PX-15 0.021 0.08 0.016 0.06 0.016 0.06 0.008 0.03 0.04 0.02
D85EX, PX-15E0 0.021 0.08 0.016 0.06 0.018 0.07 0.008 0.03 0.04 0.02
D155A-5 0.021 0.08 0.016 0.06 0.032 0.12 0.013 0.05 0.07 0.03
D155AX-5 0.021 0.08 0.016 0.06 0.032 0.12 0.013 0.05 0.07 0.03
D155AX-6 0.021 0.08 0.024 0.09 0.016 0.06 0.016 0.06 0.07 0.03
D155A-2 0.04 0.15 0.037 0.14 0.029 0.11 0.026 0.10 0.07 0.03
D275AX-5, D275A-5 0.029 0.11 0.024 0.09 0.021 0.08 0.021 0.08 0.09 0.04
D275AX-5E0 0.029 0.11 0.024 0.09 0.021 0.08 0.021 0.08 0.09 0.04
D375A-5 0.032 0.12 0.04 0.15 0.019 0.07 0.016 0.06 0.09 0.04
D375A-5E0 0.045 0.17 0.04 0.15 0.032 0.12 0.023 0.10 0.09 0.04
D475A-5 0.066 0.25 0.055 0.21 0.021 0.08 0.024 0.16 0.11 0.04
D475A-5E0 0.066 0.25 0.055 0.21 0.04 0.15 0.042 0.16 0.11 0.05
D575A-3 0.137 0.52 0.093 0.35 0.042 0.16 0.04 0.15 0.13 0.06
*(1) Includes lubricant oil of compressor for Portable Air Compressor
*(2) Includes oils in the torque converter, main clutch and steering cases, differential, etc.
*(3) Includes oils in the tandem case of Motor Grader.
16-18
Lubricant Consumption OWNING &
OPERATING COSTS
(2) Hydraulic excavators
Transmission or Hydraulic
Application *(1) Crank case *(2) Final Drives Grease
Swing Machinery Control
Unit Q’TY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
PC12R-8, PC15R-8 0.004 0.015 — — 0.0003 0.001 0.002 0.007 0.02 0.01
PC18MR-2, PC20MR-2 0.004 0.015 — — 0.0003 0.001 0.004 0.013 0.04 0.02
PC27MR-2 0.006 0.021 — — 0.0003 0.001 0.004 0.014 0.04 0.02
PC30MR-2, PC35MR-2 0.004 0.015 — — 0.0006 0.002 0.003 0.01 0.04 0.02
PC40MR-2, PC50MR-2 0.004 0.015 — — 0.0006 0.002 0.003 0.01 0.04 0.02
PC120-6, PC128US-2, PC130-6 0.019 0.07 0.001 0.003 0.0013 0.005 0.005 0.02 0.11 0.05
PC160LC-7, PC180LC-7 0.008 0.03 0.0013 0.005 0.0013 0.005 0.008 0.03 0.11 0.05
PC200, LC-7, PC210, LC-7 0.013 0.05 0.002 0.007 0.0013 0.005 0.008 0.03 0.15 0.07
PC200, LC-8, PC210, LC-8 0.013 0.05 0.002 0.007 0.0013 0.005 0.008 0.03 0.15 0.07
PC228US, LC-3 0.013 0.05 0.002 0.007 0.0013 0.005 0.008 0.03 0.15 0.07
PC220, LC-7, PC240LC-7 0.013 0.05 0.002 0.007 0.0013 0.005 0.008 0.03 0.15 0.07
PC220, LC-8, PC240LC-8 0.013 0.05 0.002 0.008 0.0013 0.005 0.008 0.03 0.15 0.07
PC220, LC-8 0.013 0.05 0.002 0.008 0.0013 0.005 0.008 0.03 0.15 0.07
PC300, LC-7, PC350, LC-7 0.019 0.07 0.004 0.014 0.003 0.01 0.011 0.04 0.22 0.10
PC300, LC-7E0, PC350, LC-7E0 0.018 0.07 0.004 0.014 0.003 0.01 0.01 0.04 0.22 0.10
PC400, LC-7, PC450, LC-7 0.02 0.08 0.007 0.027 0.003 0.013 0.013 0.05 0.26 0.12
PC400, LC-7E0, PC450, LC-7E0 0.021 0.08 0.004 0.014 0.003 0.012 0.013 0.05 0.26 0.12
PC600, LC-7 0.021 0.08 0.007 0.026 0.003 0.01 0.019 0.07 0.35 0.16
PC600, LC-8 0.024 0.09 0.007 0.026 0.003 0.01 0.019 0.07 0.35 0.16
PC750-7, PC800-7 0.032 0.12 0.013 0.05 0.005 0.02 0.024 0.09 0.35 0.16
PC800-8, PC850-8 0.032 0.12 0.013 0.05 0.005 0.02 0.024 0.09 0.35 0.16
PC1250, SP-7 0.032 0.12 0.013 0.05 0.006 0.022 0.037 0.14 0.40 0.18
PC1250, SP-8 0.048 0.18 0.013 0.05 0.006 0.021 0.037 0.14 0.40 0.20
PC1800-6 0.08 0.31 0.020 0.074 0.022 0.085 0.02 0.75 0.44 0.20
PW170-5 0.020 0.074 0.003 0.016 0.006 0.021 0.018 0.068 0.15 0.07
PW210-1 0.028 0.106 0.003 0.013 0.005 0.018 0.020 0.075 0.18 0.08
*(1) Includes lubricant of PTO case.
*(2) Includes lubricant of differential gear box.
16-19
Lubricant Consumption OWNING &
OPERATING COSTS
(3) Off-highway dump trucks
*(4) Hydraulic
Application *(1) Crank case *(2) Transmission *(3) Final Drives Grease
Control
Unit Q’TY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
HD255-5 0.029 0.11 0.016 0.06 0.005 0.02 0.011 0.04 0.04 0.02
HD325-6 0.029 0.11 0.024 0.09 0.016 0.06 0.019 0.07 0.04 0.02
HD325-7 0.029 0.11 0.023 0.09 0.011 0.04 0.009 0.035 0.04 0.02
HD405-6 0.029 0.11 0.024 0.09 0.016 0.06 0.019 0.07 0.04 0.02
HD405-7 0.029 0.11 0.023 0.09 0.011 0.04 0.009 0.035 0.04 0.02
HD465-7 0.032 0.12 0.05 0.19 0.019 0.07 0.009 0.032 0.04 0.02
HD465-7E0 0.042 0.16 0.05 0.19 0.019 0.07 0.009 0.032 0.04 0.02
HD605-7 0.032 0.12 0.05 0.19 0.019 0.07 0.008 0.03 0.04 0.02
HD605-7E0 0.042 0.16 0.05 0.19 0.019 0.07 0.009 0.032 0.04 0.02
HD785-5 0.069 0.26 0.029 0.11 0.034 0.13 0.053 0.20 0.07 0.03
HD985-5 0.069 0.26 0.029 0.11 0.034 0.13 0.053 0.20 0.07 0.03
HD1200-1 0.12 0.45 — — 0.06 0.22 0.10 0.38 0.11 0.05
HM300-1 0.019 0.07 0.021 0.08 0.013 0.05 0.008 0.03 0.04 0.02
HM300-2 0.021 0.08 0.021 0.08 0.012 0.045 0.008 0.03 0.04 0.02
HM350-1 0.029 0.11 0.032 0.12 0.019 0.07 0.013 0.05 0.04 0.02
HM350-2 0.029 0.11 0.032 0.12 0.016 0.06 0.013 0.05 0.04 0.02
HM400-1 0.029 0.11 0.032 0.12 0.021 0.08 0.013 0.05 0.04 0.02
HM400-2 0.029 0.11 0.032 0.12 0.019 0.07 0.013 0.05 0.04 0.02
*(1) Includes lubricant oil of compressor for Portable Air Compressor
*(2) Includes oils in the torque converter, main clutch and steering cases, differential, etc.
*(3) Includes oils in the tandem case of Motor Grader
*(4) Includes oils in the brake cooling tank
16-20
Lubricant Consumption OWNING &
OPERATING COSTS
(5) Motor graders
Hydraulic
Application *(1) Crank case *(2) Transmission *(3) Final Drives Grease
Control
Unit Q’TY
US Gal Liter US Gal Liter US Gal Liter US Gal Liter lb kg
Machine Model
GD500 series 0.029 0.11 0.008 0.03 0.024 0.09 0.008 0.03 0.04 0.02
GD555-3A/C 0.021 0.08 0.013 0.05 0.024 0.09 0.008 0.03 0.04 0.02
GD600 series 0.029 0.11 0.011 0.04 0.024 0.09 0.008 0.03 0.04 0.02
GD655-3A/C 0.021 0.08 0.013 0.05 0.024 0.09 0.008 0.03 0.04 0.02
GD675-3A/C 0.021 0.08 0.013 0.05 0.024 0.09 0.008 0.03 0.04 0.02
GD705A-4 0.042 0.16 0.011 0.04 0.034 0.13 0.021 0.08 0.09 0.04
GD825A-2 0.042 0.16 0.011 0.04 0.034 0.13 0.024 0.09 0.09 0.04
*(1) Includes lubricant oil of compressor for Portable Air Compressor
*(2) Includes oils in the torque converter, main clutch and steering cases, differential, etc.
*(3) Includes oils in the tandem case of Motor Grader
16-21
Tire Life OWNING &
OPERATING COSTS
Table 4 Approximate Tire Life
Machine Easy Condition Medium Condition Severe Condition
Off-Highway Dump Trucks 4,000 ~ 6,000 2,000 ~ 4,000 1,000 ~ 2,000
Articulated Dump Trucks 7,000 5,000 3,000
Motor Graders 3,000 2,000 1,000
Wheel Loaders 4,000 ~ 6,000 2,000 ~ 4,000 1,000 ~ 2,000
Wheel Dozers 3,000 2,000 1,000
Hydraulic Excavators 3,000 2,000 1,000
Traveling on well- Traveling on gravelly
maintained roads, or in silt surfaces, tire wear is normal Tire wear mostly due to
rock-cut, liable to puncture
but occasionally
or sand, tire wear is normal. rocks. cut by frequently.
The life varies with brand and material. Tires may be used above or below the tire life expectancy given in this
table.
16-22
Optimum Fleet Recommendation (OFR) OWNING &
Software Program OPERATING COSTS
Optimum Fleet Recommendation (OFR) software program is available for Komatsu distributors.
The OFR is able to simulate and recommend optimum fleet for the targeted production with followings.
1. Machine selection based on site conditions and target of production.
2. Estimation of each machine’s production.
3. Estimation of owning and operating costs.
4. Estimation of production cost.
Computer processing
Report contents
1. Production condition, object material, cost data
2. Optimum machine combination
3. Production
4. Number of units
5. Production cost
For Customer;
Please contact the nearest Komatsu distributor with your specific conditions, application and
requirements.
16-23
Komatsu Information on OWNING &
Reliability and Durability OPERATING COSTS
About Repair and Maintenance Cost Estimation
Repair and Maintenance cost is a part of the owning and operating cost.
Repair and Maintenance cost estimating software is available for Komatsu distributors.
The system is called KIRD (Komatsu Information on Reliability and Durability).
By using the KIRD, we can calculate Repair and Maintenance cost for Komatsu large sized equipment with
local conditions such as followings.
1. Parts price (Each country has different import duty, transportation charge and etc.)
2. Hourly labor charges
3. Lubricants prices
4. Repairing methods (Repair option)
• Rebuild
• REMAN (Komatsu component exchange)
5. Man- hours
6. Component and system replacement intervals per operating conditions
• Kind of job
• Environments
• Handling materials
• Operating methods
For Customer;
Please contact the nearest Komatsu distributor with your specific model, application and requirements.
16-24
CONTENTS
SECTION 17
INDEX
CONTENTS
Unit conversion tables ..............................................17-2
17-1
Unit Conversion Tables UNIT COVENTION TABLES
a. Length
Centimeter Kilometer
Meter (m) Inch (in) Foot (ft) Yard (yd) Mile (M)
(cm) (km)
1 0.01 0.3937 0.03281 0.01094 1 1.6093
100 1 39.37 3.281 1.0936 0.6214 1
2.540 0.0254 1 0.8333 0.02778
30.48 0.3048 12 1 0.3333
91.44 0.9144 36 3 1
b. Space
Sq. meter (m2) Sq. Inch (in2) Sq. foot (ft2) Sq. yard (yd2)
1 1550 10.764 1.1960
0.036452 1 0.026944 0.037716
0.09290 144 1 0.11111
0.8361 1296 9 1
c. Volume
Cu. Cu.
Cu. inch(in3) Cu. foot(ft3) Imperial Gal U.S. Gal Cu. Inch Liter
meter(m3) yard(yd3)
1 61024 35.31 1.3079 1 1.201 177.4 4.546
0.041639 1 0.035787 0.042143 0.8327 1 231 3.785
0.02832 1728 1 0.037037 0.023605 0.024329 1 0.01639
0.76455 46656 27 1 0.2200 0.2642 61.02 1
d. Weight
Kilogram (kg) Pound (lb) Metric Ton Short Ton Long Ton Newton (N)
(French Ton) (U.S. Ton) (English Ton)
1 2.2046 0.001 0.0011023 0.039842 9.80665
0.4536 1 0.034536 0.035 0.034464 4.448
1000 2204.6 1 1.1023 0.9842 9806.65
907.1 2000 0.9072 1 0.8929 8896.5
1016 2240 1.016 1.120 1 9964
0.10197 0.2248 0.031019 0.031124 0.031004 1
e. Pressure
Kilogram/sq.cm Pound/sq.in Long ton/sq.ft
BAR Pascal (Pa)
(kg/cm2) (PSI) (Ton/ft2)
1 1.0197 14.50 0.9324 100000
0.9807 1 14.22 0.9144 98066.5
0.06895 0.07031 1 0.06429 6895
1.0725 1.0937 15.56 1 107250
0.00001 0.00001020 0.000145 0.0000932 1
f. Velocity
m/sec km/h ft/sec. MPH
1 3.6 3.281 2.237
0.2778 1 0.9113 0.6214
0.3048 1.097 1 0.6818
0.4470 1.609 1.467 1
17-2
Unit Conversion Tables UNIT COVENTION TABLES
g. Horsepower
PS HP kW kg.m/s kCal
1 0.986 0.736 75 0.1757
1.014 1 0.746 76.07 0.1782
1.3592 1.3405 1 101.97 0.2389
0.01333 0.01315 0.009807 1 0.002343
5.6902 5.611 4.186 426.9 1
h. Torque
kg.m ft.lb N.m
1 7.233 9.807
0.1383 1 1.356
0.1020 0.7375 1
i. Temperature
32°F = 0°C, –459.67°F = –273.15°C, 1°F = 0.5556°C
°F °C °F °C °F °C °F °C
–450 –267.78 5 –15.00 55 12.78 150 65.56
–400 –240.00 10 –12.22 60 15.56 200 93.33
–350 –212.22 15 –9.44 65 18.33 250 121.11
–300 –184.44 20 –6.67 70 21.11 300 148.89
–250 –156.67 25 –3.89 75 23.89 350 176.67
–200 –128.89 30 –1.11 80 26.67 400 204.44
–150 –101.11 35 1.67 85 29.44 450 232.22
–100 –73.33 40 4.44 90 32.22 500 260.00
– 50 –45.56 45 7.22 95 35.00 550 287.78
0 –17.78 50 10.00 100 37.78 600 315.56
°F 1 2 3 4 5 6 7 8 9
°C 0.556 1.111 1.667 2.222 2.778 3.333 3.889 4.444 5
Example: To convert 92°F into °C
90°F = 32.22°C, 2°F = 1.111°C, 90°F+2°F = 33.33°C
17-3
Unit Conversion Tables UNIT COVENTION TABLES
j. Angles of Gradient
o
45
= 100%
17-4
INDEX
CONTENTS
A B
Air dryer ............................................................... 4A-44 Beads ..................................................................... 13-5
Altitude deration...................................................... 12-6 Bench height ......................................................2A-101
Angle dozer ........................................................... 1B-2 Blade accumulator................................................5A-18
Arm crowd force .................................................. 2A-83 Blade availability.....................................................1B-4
Asphalt debris........................................................ 8A-4 Blade fill factor.......................................... 1B-21, 15A-4
Asphalt-pavement profiling method ....................... 5C-3 Blade float ............................................................5A-19
Attachment availability Blade selection .......................................................1B-2
Motor graders ................................................... 5A-8 Body extension.....................................................4A-43
Wheel loaders................................................3A-116 Body liner .............................................................4A-43
Attachments of excavator Body selection ......................................................4A-53
Aqua-digger ....................................................... 2J-3 Bolt-on cutting edge ...........................................3A-122
Car scrap handler ............................................. 2H-2 Bolt-on teeth .......................................................3A-122
Clamshell buckets............................................. 2D-2 Brake performance curve
Demolition high reach ....................................... 2G-6 HD255-5 ..........................................................4A-13
Demolition two piece boom............................. 2G-11 HD325-7 ..........................................................4A-15
Ditch cleaning buckets...................................... 2D-2 HD325-6 ..........................................................4A-17
High-mount cab ................................................ 2H-6 HD405-7 ..........................................................4A-19
Hydraulic breaker.............................................. 2D-8 HD405-6 ..........................................................4A-21
Hydraulic crusher............................................ 2G-14 HD465-7E0......................................................4A-23
Hydraulic crusher & cutter .............................. 2G-12 HD465-7 ..........................................................4A-25
Lifting magnet ................................................... 2H-2 HD605-7E0......................................................4A-27
Magnet fork....................................................... 2H-5 HD605-5 ..........................................................4A-29
Offset boom ...................................................... 2D-6 HD785-5 ..........................................................4A-31
Orange grapple................................................. 2H-5 HD985-5 ..........................................................4A-34
Power fork....................................................... 2G-18 HD1500-5 ........................................................4A-36
Ripper bucket.................................................... 2D-2 730E ................................................................4A-37
Road ripper ....................................................... 2D-7 830E ................................................................4A-38
Rotary arm and 2-piece boom .......................... 2D-5 830E-AC ..........................................................4A-39
Rotary log grapple ...........................................2D-11 930E-3 .............................................................4A-40
Scrap grapple ................................................... 2H-5 Breaker................................................................... 13-4
Scrap handling machine ................................... 2H-3 Breakout force .................................................... 3A-113
Single-shank rippers ......................................... 2D-2 Bucket and arm combinations
Slope finishing buckets ..................................... 2D-2 Excavators, backhoes .....................................2A-84
Spike hammer................................................... 2D-6 Wheel-type excavators .................................... 2F-13
Super long front ................................................ 2D-6 Bucket capacity .................................................. 3A-113
Telescopic arm (box type)................................. 2D-4 Bucket capacity definition.....................................2A-81
Telescopic arm (sliding type) ............................ 2D-4 Bucket capacity rating ..........................................2A-81
Vibratory pile driver........................................... 2D-7 Bucket digging force.............................................2A-83
Trapezoidal buckets.......................................... 2D-2 Bucket fill factor
Attachments of motor grader Excavators, backhoes ...................................2A-109
Front dozer blade............................................ 5A-12 Wheel loaders................................................3A-158
Rear mounted ripper....................................... 5A-13 Bucket features ..................................................3A-121
Scarifier............................................................. 5A-9 Bucket selection
Attachments of wheel loader Excavators, backhoes .....................................2A-84
Dumping fork spec........................................ 3A-144 Wheel loaders................................................3A-123
High lift boom spec. ...................................... 3A-155 Bucket width .........................................................2A-83
Log grapple spec. ......................................... 3A-146
Lumber fork spec. ......................................... 3A-145 C
Lumber grapple spec. ................................... 3A-143 Calculation of production......................................15A-2
Attachment and options Carcass .................................................................. 13-5
Motor grader ................................................... 5A-16 Carry position ..................................................... 3A-115
Rigid dump truck............................................. 4A-41 Chip bucket ........................................................3A-121
Automatic three-mode suspension ...................... 4A-42 Coal dozer ..............................................................1B-3
Automatic retard speed control............................ 4A-42 Component dimensions and weights
Excavators, backhoes .....................................2A-53
Hydraulic loading shovels................................2E-10
Concrete debris ......................................................8A-5
Concrete pulverizer ............................................. 2G-15
Cone index numbers (qc) ................................... 15B-11
Conventional tire .................................................... 13-4
Conversion tables................................................... 17-2
Cross loading .......................................................15A-6
INDEX-1
INDEX
F J
5-stage dust indicator .......................................... 14A-4 Jaw crusher ............................................................8A-4
Features Job efficiency
Articulated dump truck ...................................... 4B-2 Bulldozers........................................................1B-21
AVANCE series (Wheel loaders) ...................... 3A-2 Excavators, backhoes ...................................2A-109
Bulldozers ......................................................... 1B-2 Rigid dump trucks............................................4A-63
Backhoe loaders .................................................. 6-2 Wheel loaders................................................3A-163
Compact track loaders...................................... 7B-2 Jumbo crusher..................................................... 2G-17
Crawler-type tractors ........................................ 1A-2
Dash-8 series.................................................... 2A-4 K
Dash-7 series.................................................... 2A-3
Engines.............................................................. 12-2 KMAX and XS teeth
Forwarders...................................................... 10B-2 Excavotors, backoes .......................................2A-96
Generator sets ................................................... 11-2 Wheel loaders................................................3A-137
Harvesters ...................................................... 10A-2 KIRD..................................................................... 16-24
Hydraulic loading shovels ................................. 2E-2
Minimal swing radius excavators (uu)............... 2B-2
Mobile crusher & recyclers ............................... 8A-3
Mobile soil recycler ........................................... 8C-2
Mobile wood tub grinders.................................. 8B-2
Motor graders ................................................... 5A-2
INDEX-2
INDEX
INDEX-3
INDEX
U
U-tiltdozer .............................................................. 1B-2
Use of brake performance curve ......................... 4A-12
Use of travel performance curve
Rigid dump trucks ........................................... 4A-12
Upper attachment
Crawler type tractors....................................... 1A-26
Motor graders ..................................................5A-11
INDEX-4