Professional Documents
Culture Documents
Previous Screen
i02638817
Removal Procedure
Start By:
A. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
NOTICE
Illustration 1 g01334433
Typical example
Installation Procedure
NOTICE
1. Inspect the components of the engine oil bypass valve for wear or damage. Check the valve and
the valve seat for an abnormal contact pattern. Check the spring for weakness or damage. If
necessary, replace the engine oil bypass valve.
Illustration 2 g01334433
Typical example
2. Install a new sealing washer (2) to engine oil bypass valve (1) .
3. Install engine oil bypass valve (1) to the cylinder block. Tighten the engine oil bypass valve to a
torque of 69 N·m (51 lb ft).
4. If the engine is equipped with a balancer, install the balancer. Refer to Disassembly and
Assembly, "Balancer - Install".
End By: Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
Copyright 1993 - 2021 Caterpillar Inc. Sat Dec 11 08:06:08 UTC+0700 2021
All Rights Reserved.
Private Network For SIS Licensees.