Professional Documents
Culture Documents
Pantalla anterior
Pruebas y Ajustes
236B2 and 252B2 Skid Steer Loaders Hydraulic System
Número de medio -KENR8823-02 Fecha de publicación -01/11/2009 Fecha de actualización -24/11/2009
i02045270
Visual Inspection
SMCS - 4350-035; 5050-040
Before you perform this procedure, refer to Testing and Adjusting, "Machine Preparation" for the
correct procedure for machine preparation.
Escaping fluid under pressure, even a pinhole size leak, can penetrate
body tissue, causing serious injury, and possible death. If fluid is
injected into your skin, it must be treated immediately by a doctor
familiar with this type of injury.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
A visual inspection of the system is the first step when you troubleshoot a problem.
Illustration 1 g00696549
1. Check the hydraulic oil level in the sight glass for the hydraulic tank.
2. Look for air bubbles in the oil. Look for water in the oil.
Note: Air bubbles may be caused by a fitting that is loose or damaged. A loose fitting or a
damaged fitting allows air to enter the suction side of the system. This causes the oil to leak.
3. Add oil to the hydraulic system, if necessary. Refer to the Operation and Maintenance Manual
for the recommended oil and for the correct procedure.
4. Check all lines, all hoses, and all connections for damage and for leaks. Look for fluid on the
ground under the machine.
Note: If fluid can leak out of a fitting or out of a connection, air can leak into the system.
Illustration 2 g01050319
5. Remove the hydraulic oil filter and inspect the filter for foreign material. A magnet will
separate ferrous particles from nonferrous particles.
Next, perform the operational checks and last perform the instrument tests.
Copyright 1993 - 2016 Caterpillar Inc. Fri Dec 09 2016 08:20:29 GMT-0500 (Hora est. Pacífico, Sudamérica)
Todos los derechos reservados.
Red privada para licenciados del SIS.