Professional Documents
Culture Documents
Service Manual
●
Printed in Japan
Notice
This manual contains technical information on the FX-7202 aimed at Fukuda
Denshi service representatives and professional engineers.
Before performing maintenance the unit, read the manual carefully and use it
to help you work correctly and safely.
When you have finished using the manual, store it carefully in a designated
location.
●Safety
This manual utilizes the graphic symbols shown below. Make sure that you
understand the meaning represented by these symbols, carefully read the
instructions given in the text, and work safely.
DANGER
Failure to follow this message may result in death or serious injury to the
patient or operator, damage to the equipment, or create a fire hazard.
WARNING
Failure to follow this message may result in death or serious injury to the
patient or operator.
CAUTION
Failure to follow this message may cause injury to the patient, or may
cause damage to the equipment.
Symbol Description
i
●Servicing Precautions
In servicing the FX-7202, observe the following.
DANGER
Never remodel the medical electronic equipment.
If remodelled, the equipment may not ensure safe operation,
thereby causing accidental hazards to the patient and
operator.
CAUTION
y The service manual is intended for the service engineers
of Fukuda representatives and the technical staff
concerned with medical electronic equipment. Servicing,
reassembling, and adjustment shall be performed by
autorized service engineers.
y Prepare proper facilities and tools when servicing.
y Be sure to follow the instructions of operation manual
when operating the instrument. For operating precautions,
refer to the operation manual.
ii
CAUTION
Disassembling/Reassembling Precautions
y Be sure to turn the power off and disconnect the power supply cord
from the wall outlet. Then start disassembling the instrument.
y When removing the main PC board, remove the battery in advance.
y Take care not to disconnect and connect the key panel and sensor
board from/to the connector too frequently. Too frequent disconnection
and connection of these units may cause poor contact.
y Use proper screwdrivers to loosen screws.
y When reassembling, make sure all screws are tightened to original
positions and all disconnected connectors are reconnected properly.
CAUTION
If you find a value which exceeds the allowable level, be sure to let the
user avoid using the instrument. If the user operates the instrument as it
is, he/she may receive an hazardous accident.
●Equipment Classification
The FX-7202 is classified into the following equipment:
1. Protection against electrical shock
Class 1, Internally powered
2. Type against electrical shock
Applied part: Type CF
3. Degree of protection against harmful water invasion
Ordinary equipment
4. Degree of safety in using under air-inflammable anesthetic gases or
oxygen/nitrous
oxide-anesthetic gases
Equipment used under an environment containing no inflammable
anesthetic gases or no inflammable cleaning agent.
5. Running mode
Continuous running mode
iii
Overview of the Manual
This manual consists of the following 8 chapters.
Contents of each chapter are briefly explained below.
Chapter 2 Maintenance
Cleaning, test menu, program version updating, periodical inspection items,
and methods.
Chapter 3 Disassembly
How to disassemble the unit in order to replace defective parts.
iv
Contents
Notice ···································································································································· ⅰ
Safety··························································································································· ⅰ
Servicing Precautions ·································································································· ⅱ
Equipment Classification ······························································································ ⅲ
Overview of the Manual ···································································································· ⅳ
v
Chapter 3 Disassembly ···································································································· 3-1
Removing the enclosure cover ························································································3-1
Removing the main board ································································································3-2
Removing the recorder unit ·····························································································3-3
Removing the ECG AMP unit ···························································································3-4
vi
Chapter 5 Spare Parts List ······························································································ 5-1
MAIN BOARD (PCB-6868B) ····························································································· 5-1
ECG AMP BOARD(PCB-6867A) ······················································································· 5-5
OPERATION BOARD (PCB-6866C) ················································································· 5-7
POWER1 BOARD (PCB-6863B) ······················································································· 5-9
POWER2 BOARD (PCB-6864B) ······················································································· 5-13
MARK SENSER BOARD (PCB6865) ················································································ 5-14
MAGAZIN BOARD (PCB-6862) ························································································ 5-14
vii
viii
Chapter 1
Component Names and Functions
Unit (top face) ................................................................................ 1-1
Unit (side, rear, and bottom faces) ............................................... 1-2
Operation panel ................................................................................... 1-3
Specifications list................................................................................ 1-5
Chapter 1 Component Names and Functions
1-1
Chapter 1
(10) CARTRIDGE
compartment
CARTRIDGE
1-2
Component Names and Functions
Operation panel
The functions of the operation panel keys and lamps are outlined below.
(2) Charge lamp (3) LEAD switching
1-3
Chapter 1
1-4
Component Names and Functions
Specifications list
1-5
Chapter 1
1-6
Chapter 2
Maintenance
Cleaning ............................................................................................... 2-1
Cleaning the unit ..................................................................... 2-1
Replacing the battery.......................................................................... 2-2
Installing the optional software.......................................................... 2-4
Self-diagnostics test ........................................................................... 2-5
User self-diagnostics test ........................................................ 2-6
TEST PATTERN ................................................................. 2-7
RECORDING TEST............................................................ 2-8
KEY TEST......................................................................... 2-10
LCD TEST ........................................................................ 2-10
BUZZER TEST ................................................................. 2-11
Manufacturer self-diagnostics test......................................... 2-12
STATUS TEST .................................................................. 2-14
LAN TEST......................................................................... 2-15
MEMORY TEST................................................................ 2-16
RECORDER TEST ........................................................... 2-17
TOUCH PANEL TEST....................................................... 2-19
INTERNAL MEMORY INITIALIZE..................................... 2-20
FX7202 UPDATE ................................................................................ 2-21
Periodical inspections ...................................................................... 2-22
Periodical inspection intervals and precautions .................... 2-22
List of periodical inspection items ......................................... 2-22
Safety inspections (6 items) .................................................. 2-23
Before checking the leakage current ................................ 2-23
Checking the earth leakage current
(current that flows to protective earth resistance) ............. 2-25
Checking the enclosure leakage current
(current that flows from the enclosure to
the earth terminal of the power outlet)............................. 2-26
Checking the patient leakage current I.............................. 2-27
Checking the patient leakage current III............................ 2-28
Checking the patient measurement current ......................2-29
Checking the protective earth resistance ..........................2-30
Inspection of electrical performance/characteristics ..............2-31
Hardware inspections (10 items) ...........................................2-33
Periodical inspection record ............................................................2-35
Chapter 2 Maintenance
Cleaning
CAUTION
z Prevent chemicals and other liquids from getting inside
the unit and connectors. Electrical equipment can short
and get damaged.
z Do not use detergents containing organic solvent,
thinner, toluene, benzene, and similar substances. They
can damage resins. Do not use them.
z Do not use abrasives or chemical cleaners either.
z When using chemical sprays to disinfect entire rooms,
take steps to prevent chemicals from adhering to the
unit's internal components and connectors. Shorting of
electrical parts can cause damage, and poor connections
can cause malfunctions.
2-1
Chapter 2
DANGER
Before replacing the battery, make sure to turn the power OFF and unplug
the power supply cord from the power outlet.
1. Turn OFF the main power switch of the unit and unplug the power supply cord.
Battery
Connector
2-2
Maintenance
Battery
If the battery compartment cover does not fit well, reinstall the battery
NOTE and battery cable in the battery case.
5. After replacing and charging the battery, disconnect the power supply cord,
and then turn ON the main power switch to make sure that the unit starts up
normally. Also make sure the LED in the charge section is lit blue.
Charge the battery first after replacing it. Capacity of the battery stored
NOTE for a long time has lowered due to self-discharge.
Depending on the remaining charge of battery, charging may not start.
2-3
Chapter 2
1. Turn OFF the main power switch of the unit and unplug the power supply cord.
Cartridge compartment
Screw
cover
Cartridge
Connector
4. After inserting the cartridge, turn on the power switch, and make sure that the
equipment starts up. Also make sure that the optional software operates.
2-4
Maintenance
Self-diagnostics test
【MENU】
ECG mode Program set mode
【EXIT】
【MAINTENANCE】 【MENU】
【EXIT】
User self-test
MAKER
【 MAINTENANCE】
Password input
【RESET】
Maker self-test
2-5
Chapter 2
BUZZER MAKER
TEST MAINTENANCE
MENU EXIT
By tapping the [EXIT] key, the screen returns to the [MODE SELECT]
screen.
2-6
Maintenance
Test Pattern
This section explains how to select the built-in electrocardiogram (ECG) test pattern
waveform to use during an operation check or demonstration.
MENU EXIT
NOTE Since test pattern information is not backed up, [NONE] is always
selected at the time of power ON or at the time of initialization.
4. By tapping the [MENU] key, the screen returns to the [SET UP MODE
(MAINTENANCE)] screen.
5. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
2-7
Chapter 2
Recording Test
This section explains how to carry out the recorder test.
Push 【START/STOP】
MENU EXIT
3. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
2-8
Maintenance
4. Tap the [START/STOP] key, then format below will be recorded in the transfer
speed of 5mm/sec, 10mm/sec, 12.5mm/sec, 25mm/sec, and 50mm/sec.
20mm
20mm
20mm
20mm
2-9
Chapter 2
Key test
This section explains how to carry out the tests related to key operations.
1. Tap the [KEY TEST] key on the [SET UP MODE (MAINTENANCE)] screen to
go to the [MAINTENANCE (KEY TEST)] screen.
Review
START
Reset 1mV STOP
MENU EXIT
2. When a key on the operation panel is pressed in this screen, the pressed key
is highlighted on the LCD.
3. By tapping the [MENU] key, the screen returns to the [SET UP MODE
(MAINTENANCE)] screen.
4. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
LCD TEST
This test is to check for missing dots of the LCD and to check gradation, etc. of the
LCD.
1. LCD display begins automatically in the predetermined mode when the [LCD
TEST] key is tapped in the [SET UP MODE (MAINTENANCE)] screen.
2 - 10
Maintenance
BUZZER TEST
This test is to check buzzer's tone, etc.
MENU EXIT
3. By tapping the [MENU] key, the screen returns to the [SET UP MODE
(MAINTENANCE)] screen.
4. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
2 - 11
Chapter 2
MAINTENANCE (PASSWORD)
FX-7202
CTL :01-01
NO :00018
MENU EXIT
2. By tapping the [MENU] key, the screen returns to the [SET UP MODE
(MAINTENANCE)] screen.
3. By tapping the [EXIT] key, the screen returns to the inspection screen set in
advance.
2 - 12
Maintenance
NOTE The hard copy function is not backed up if the power is turned off in the
state where the hard copy function is ON.
RESET
2 - 13
Chapter 2
Status Test
This is the test related to the display function for each status of the hardware.
BATTERY OTHERS
3. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 14
Maintenance
LAN Test
In this test, the LAN is tested.
1. Tap the [LAN TEST] key on the [SET UP MODE (MAKER MAINTENANCE)]
screen to go to the [MAINTENANCE (LAN TEST)] screen.
2. Connect the FX-7202 to the host computer with the LAN cable, and set each
IP adress of them.
OK NG
0000 0000
ECG :
HOST :
Push 【START/STOP】
MENU RESET
4. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 15
Chapter 2
Memory Test
This test is to check read/write from/to the DRAM.
OK NG
0000 0000
Push 【START/STOP】
MENU RESET
3. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 16
Maintenance
Recorder Test
This test is to confirm that the phase adjustment of the thermal print head is correct
when moving the recorder.
2. Tap the [TEST PRINTS] key to start the processing indicated below.
Test Processing
TEST PRINT1 To entirely smear the printable zone of the chart in black.
TEST PRINT2 To print a rectangular wave of the following format.
20mm
1ch
6ch 20mm
2 - 17
Chapter 2
3. Tap the function key [25mm/s] is suspended to switch the feed rate cyclicly.
4. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 18
Maintenance
1. Tap the [TOUCH PANEL TEST] key on the [SET UP MODE (MAKER
MAINTENANCE)] screen to go to the [MAINTENANCE (TOUCH PANEL
TEST)] screen.
3 1
MENU RESET
2. Tap the center of the black circle “ • ” sequentially. The number of points to
be tapped is four.
3. The TOUCH PANEL TEST terminates when all of the black circles “ • ” at
four points are tapped, and the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
4. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 19
Chapter 2
1. Tap the [INTERNAL MEM. INITIALIZE] key on the [SET UP MODE (MAKER
MAINTENANCE)] screen to go to the [MAINTENANCE (INTERNAL MEM.
INITIALIZE)] screen.
YES NO
MENU RESET
3. By tapping the [MENU] key, the screen returns to the [SET UP MODE (MAKER
MAINTENANCE)] screen.
2 - 20
Maintenance
FX7202 UPDATE
Update the software incorporated in the Electrocardiograph.
Update Start
ECG :
HOST :
MENU RESET
2. Tap the [Update Start] key. The software will be updated and the
Electrocardiograph will be reset.
2 - 21
Chapter 2
Periodical inspections
2 - 22
Maintenance
WARNING
If, during a safety inspection, a value that exceeds the allowable limit is
confirmed, immediately stop using the given unit; then replace the
defective part or make proper repairs. Failure to repair the unit can lead to
a serious accident.
By measuring the voltage at both ends of the impedance, you can find the
leakage current.
Voltmeter
Because digital voltmeters are required to indicate true effective values for
composite waveform from DC to 1 MHz, it is recommended that you use a
voltmeter whose performance meets the prescribed standard as closely as
possible.
For use during maintenance and inspection in the field, you can use a
commercially available digital voltmeter instead. However, check the
frequency band of the voltmeter you plan to use ahead of time. To measure
a leakage current that exceeds the measurable frequency band, use it with
care paying attention to the indication on the voltmeter.
2 - 23
Chapter 2
2 - 24
Maintenance
Conversion plug
Conversion plug
FX-7202
FX-4010
Power
Power supply
cable cord
MD
Measurement Measurement point A
point B Leakage current measuring device
Acceptance standards
Normal condition 0.5 mA or less
Single fault condition 1.0 mA or less
2 - 25
Chapter 2
Checking the enclosure leakage current (current that flows from the
enclosure to the earth terminal of the power outlet)
Measurement wiring diagram
Conversion plug
FX-4010
FX-7202
Power cable
Power supply
cord
MD
Measurement Measurement point A
point B
Leakage current measuring device
Acceptance standards
Normal condition 0.1 mA or less
Single fault condition 0.5 mA or less
2 - 26
Maintenance
FX-7202
FX-4010
MD LA
Measurement Measurement point A
point B Short all electrodes.
Leakage current
measuring device
Acceptance standards
Normal condition 0.01 mA or less
Single fault condition 0.05 mA or less
2 - 27
Maintenance
FX-7202
FX-4010
supply cord
Power cable LF RA
LA
MD
Measurement Measurement point B
point A Leakage current measuring device
Acceptance standards
Normal condition 0.01 mA or less
Single fault condition 0.05 mA or less
2 - 29
Chapter 2
6.Internal noise
Make shortcircuited the each terminal of all input terminals with the
parallel impedance with 51kΩ and 47nF. Place the baseline at the center at
each lead selection position, set the sensitivity to 2, and record the noise.
Check that the size of the noise on the recorded line is 0.4 mmp-p or
smaller at random 0.2-second intervals.
7.Recording speed
Connect a clock that provides the unit with signal voltage at 1-second
intervals, and record the pulse waveform. Check that the error in transfer
speed at speeds of 5mm/sec, 10 mm/sec, 12.5mm/sec, 25 mm/sec, and 50
mm/sec is within ±3%.
2 - 32
Maintenance
WARNING
If, during a hardware inspection, you notice damage or other abnormality,
immediately stop using the given unit; then replace the defective part,
replenish, or make proper repairs.
Failure to repair the unit can lead to a serious accident.
Do not replace the part nor carry out refilling or the like but change the
hardware (MAIN BOARD, for ex.) found faulty. If the trouble cannot be
remedied by replacing any part, for example, the guarantee clause of the
supplier will not apply to the relevant hardware.
2 - 33
Chapter 2
2 - 34
Maintenance
2 - 35
Chapter 2
Description (Repair
standard) value t
required
1. Earth leakage Normal condition (0.5mA or less) mA OK・NG
current
Single fault condition (1.0mA or less) mA OK・NG
2. Enclosure leakage Normal condition (0.1m or less) mA OK・NG
current
Single fault condition (0.5mA or less) mA OK・NG
3. Patient leakage Normal condition (0.01mA or less) mA OK・NG
Safety inspection
current I
Single fault condition (0.05mA or less) mA OK・NG
4. Patient leakage
current III Single fault condition (0.05mA or less) mA OK・NG
5. Patient Normal condition (0.01mA or less) mA OK・NG
measurement
current (AC) Single fault condition (0.05mA or less) mA OK・NG
6. Protective earth Protective earth terminal/
resistance (0.1Ω or less) Ω OK・NG
potential equalization terminal
Power supply cord end/potential
equalization terminal (0.2Ω or less) Ω OK・NG
5. Counter electrode
voltage ±550 mV imposed DC voltage (10 mm±5% or less) % OK・NG
( )
6. Internal noise 0.4 mm P-P or less
27kΩ input short, sensitivity 2 at sensitivity 2 OK・NG
(Noise : 20 μV or less) mm
7. Recording speed 10 mm/s (±3% or less) % OK・NG
12.5 mm/s (±3% or less) % OK・NG
25 mm/s (±3% or less) % OK・NG
50 mm/s (±3% or less) % OK・NG
Overall judgement OK・NG
2 - 36
Chapter 3
Disassembly
Removing the enclosure cover .......................................................... 3-1
Removing the main board .................................................................. 3-2
Removing the recorder unit ............................................................... 3-3
Removing the ECG AMP unit ............................................................. 3-4
Chapter 3 Disassembly
Mounting screws
Enclosure cover
3-1
Chapter 3
CAUTION
To prevent damage by static electricity, eliminate static electricity from
your body before touching the board.
For details on removing procedures, see page 3-1, "Removing the enclosure
cover."
P3
P1
P2
3. Remove the mounting screws (four) first, then the main board.
Mounting screws
Main board
CAUTION
If the battery is installed, make sure to remove it in advance.
3-2
Disassembly
For details on removing procedures, see page 3-1, "Removing the enclosure
cover."
2. Remove the connectors (P6 and P9) connected to the MAIN BOARD.
P6
P9
Recorder unit
Mounting screw
3-3
Chapter 3
CAUTION
To prevent damage by static electricity, eliminate static electricity from
your body before touching the board.
For details on removing procedures, see page 3-1, "Removing the enclosure
cover" and page 3-2, "Remove the main board. "
2. Remove the mounting screws (two) to remove transparent cover of the ECG
AMP unit.
Mounting screw
Transparent cover
3. And then, remove the mounting screws (four) to remove the ECG AMP unit.
Mounting screw
3-4
Chapter 4
Electric Circuit Diagrams
Overall block diagram of unit............................................................. 4-1
MAIN BOARD block diagram .................................................. 4-2
MAIN CPU section .............................................................. 4-3
MAIN G/A section ............................................................... 4-3
Memory section .................................................................. 4-4
AMP, LAN interface section ................................................ 4-6
LCD controller section......................................................... 4-7
Thermal head control section.............................................. 4-7
Motor control section........................................................... 4-8
Real time clock ................................................................... 4-8
Wait control section............................................................. 4-9
Reset circuit section............................................................ 4-9
Sensor control section ...................................................... 4-10
OPERATION interface and power interface section.......... 4-11
Power generator section ................................................... 4-12
Clock generator section .................................................... 4-12
ECG AMP BOARD block diagram......................................... 4-13
OPERATION BOARD block diagram .................................... 4-15
POWER BOARD block diagram ........................................... 4-16
FX-7202/FCP-7201 Block Diagram ................................................... 4-17
MAIN BOARD Circuit Diagrams (PCB-6868) ................................... 4-18
Power DC/DC converter block .............................................. 4-18
CLK block.............................................................................. 4-19
MAIN CPU block ................................................................... 4-20
MAIN GA block...................................................................... 4-21
FROM block .......................................................................... 4-22
SDRAM block........................................................................ 4-23
RTC/MAIN WAIT block.......................................................... 4-24
POWER I/F block .................................................................. 4-25
AMP THERMAL block ........................................................... 4-26
SENSER/BUZZER/MOTOR DRV JTAG I/F block ................. 4-27
LAN PORT/AMP I/F block ..................................................... 4-28
KEY/LCD I/F block ................................................................ 4-29
LCD controller block.............................................................. 4-30
POWER LED block ...............................................................4-31
ECG AMP BOARD Circuit Diagrams (PCB-6867A) .........................4-32
AMP block .............................................................................4-32
LAN PORT block ...................................................................4-33
Bypass condenser block .......................................................4-34
OPERATION BOARD (PCB-6866C)...................................................4-35
Touch panel/LCD/KEY I/F......................................................4-35
Back light block .....................................................................4-36
MAIN POWER SUPPLY......................................................................4-37
CHARGE.............................................................................................4-38
LOGIC 1 ..............................................................................................4-39
LOGIC 2 ..............................................................................................4-40
MAGAZIN SW BOARD.......................................................................4-41
MARK SENSER BOARD....................................................................4-42
Electric Circuit Diagrams
1.MAIN BOARD(PCB-6868)
2.ECG AMP BOARD(PCB-6867)
3.OPERATION BOARD(PCB-6866)
4.POWER BOARD(PCB-6863)
6.CARTRIDGE BOARD(PCB-6818) [option]
The electrocardiographic signal input through the patient connector is boosted and is
AD-converted by the ECG AMP BOARD and then, by the MAIN BOARD, an
electrocardiogram is displayed and recorded, arrhythmia examination, R-R interval and
various other treatments, measurements and analyses are performed.
On the POWER BOARD, power supplied from the AC power supply is changed into
voltages (3.3 V, 5 V, 12 V, +5 VBAT) necessitated by other circuits and supplied to them.
+24 V is supplied to the thermal head and motor driver.
The OPERATION BOARD transfers LCD signal from the MAIN BOARD, and controls
the operation panel and TOUCH PANEL.
12bits VOLTAGE
ADC REFERENCE
RJ-45 ETHERNET
CNTR
ISOLATION
LAN
P5
OPRATION PCB JTAG
POWER
ON/OFF
P8
KEY_SC P3 CARTRIGE
Main
Power Charge Error LCD
CNTR
KEY_DT
+3.3V P9
+5V MOTOR
+15V DRV
LCD TOUCH +24V
CFL CONTRAST
PANEL (for MotorDrive) +24V
74HCT541
I/F +24V(for ThermalHead)
POWER SIGNAL P6
P1 P7
STEPING
MOTOR
THERMAL HEAD(110mm)
TOUCH PANEL
RECORDER
SENSOR
320 x 240
MONO STN LCD
POWER UNIT RECORDER BLOCK
4-1
Chapter 4
P8
CARTRIDGE
BOARD
FLASH ROM
8MB
MAIN CPU
(SH7709A)
CLK (128MHz)
MAIN G/A
RESET RTC
SDRAM
16MB
MOTOR
P3 DRIVER Lithum
Battery
OPERATION LCD LAN
BOARD CONTROLER CONTROLER
INTERNAL
POWER
THERMAL REC.SENSOR POWER POWER ECG AMP
HEAD MOTOR SIGNAL POWER
P6 P9 P7 P1 P2
4-2
Electric Circuit Diagrams
4-3
Chapter 4
Memory section
The memory section can be divided into the following blocks.
(1) FLASH ROM
(2) SDRAM
4-4
Electric Circuit Diagrams
(2) SDRAM
Consisting of two MT48LC8M16A2TG-75's (128 Mbits), the SDRAM
is used for program store and waveform work area.
4-5
Chapter 4
4-6
Electric Circuit Diagrams
4-7
Chapter 4
4-8
Electric Circuit Diagrams
4-9
Chapter 4
4 - 10
Electric Circuit Diagrams
4 - 11
Chapter 4
VOUT=0.8(1+R51/(R52+R53))
4 - 12
Electric Circuit Diagrams
R
20bit ADC
ch1 TXD RXD
L AMP
20bit ADC Control GA
ch2 RXD TXD
C1
20bit ADC
ch3
C2
20bit ADC
ch4
C3
20bit ADC
ch5 +5VD
C4
20bit ADC
ch6 Isolation +5V
C5 Power
20bit ADC +5VA
ch7 100KHz
C6
20bit ADC
ch8
Vref +2.5V
Voltage
Reference
E25F
E25F
RF 12bit ADC
ch1
TXD+
Isolation TXD-
RJ-45 Noize
LAN CN Filter Trance
RXD+
RXD-
4 - 13
Chapter 4
4 - 14
Electric Circuit Diagrams
POWER
POWER
LED
CHARGE
BAT. LED BATTERR
ON/OFF
ON/OFF KEY
MAIN
BOARD
P
3
KEY-SCAN
KEY-DATA
TOUCH PANEL P
1 AD-DATA
ADC MAIN
ADS7816 BOARD
P
4
+15V
FT-34 +15V
LCD CFL P
5
4 - 15
Chapter 4
AC90~264V
47~53Hz
TRANS
THERMAL
NF
HEAD
Overcurrent
regulator
SWITCHING
CONTROL
( power factor
improvement ) MOTOR
Motor
driver
Charger
(CV/CC)
DC-DC
converter
+24V
DC-DC
converter +12V
Power control
signal +12V
Ni-MH
BATTERY DC-DC
converter +5V
(9.6V)
POWER +5V
(3800mAH)
CONTROL
DC-DC
converter +3.3V
+3.3V
Battery signal
(SMBus)
4 - 16
FX-7202 Block Diagram
Battery pack
AC LOWER CASE UPPER CASE
AC inlet
J6
J1 P5
J5 P1 FFC cable
P3 P3 OPERATION BOARD
POWER SUPPLY FFC cable
UNIT J3 P7
P1 P2
4 - 17
MAIN BOARD Circuit Diagrams (PCB-6868B)
+5V
+1.9V
6
5 L1 CP2
CP1 2 LQN6C4R7M04 4.7uH
4 1
R2
0.051J(1W NPR) Q1
SI3443DV
3
R3 +1.9VPOWER SUPPLY
IC3 LTC1622CMS8 91KF
1 8 CP454 CP455
SENSE VIN
2 7
ITH PDRV
2
3 6 CP3
VFB GND
2
+ C10
R1 4 5 330UF/6.3V(O) R4
RUN/SS SYNC/MODE N.C
2
10KF + C6 33KF
D1 0.1uFFZ
D3FS4A
C4 C5
1
100UF/10V(C)5 0.1uFFZ
1
C2 C3 1
220pFCHJ 470pFCHJ R5
C1 33KF
220pFCHJ
DG
+5V
+5V
*A
CP4 IC4A
CP456 CP6
14
20
IC28A IC28B HD74ACT244
1 4 R6 22F
( 4,13 ) IC100kHz
3 6 2 18
(4) IC100kHz_L R286 510F B100kHz ( 11 )
2 5
B100kHz_L ( 11 )
(+5V)
TC74VHC132FT TC74VHC132FT
C214
1 19
7
CP5 1000PF
10
DG IC4B
CP457 IC28D IC28C
DG 12 9 CP7
20
HD74ACT244
11 8 R7 22F
R287 510F 13 10 4 16
TC74VHC132FT TC74VHC132FT (+5V)
C215
1000PF
1 19
DG 10 DG
+3.3V +3.3VA
CP8
L2
2
LFC32TE 101K +
C11
4.7UF/6.3V(T)3 C7 C8 C9
0.1uFFZ 0.1uFFZ 0.1uFFZ
1
DG
4 - 18
●CLK block
+3.3V
2
C12 + CP12
4.7UF/6.3V(T)3
R8 51F 16MHz
C15 C16 LCDCCLK2 ( 13 )
0.01uFBJ 0.01uFBJ
1
+3.3V DG
X1 MG-5100SA-FD
2 14
S0 VDD1
13 CP13
VDD2
1 CP14
S1
3 R9 51F CP15 16MHz
CLKA TCLK (3)
*B 12 4 R10 51F
S2 CLKB 7.3728M (4)
CP9 10 R11 51F 20MHz
CLKC 20M_LAN ( 11 )
6
R278 10KF CLKD
11
OE
5
CPUCLK
DG
7
XBUF
CP16
8
TIN
9 R12 33F 32MHz
GND MCPUCLK (3)
CP17
32MHz
FMCCLK (4)
*A
CP11
IC5 CY2305SC-1
64MHz R15 62F 1 8
( 3, 7 ) MCKIO REF CLKOUT
CP19
+3.3V
3 R16 33F CP20 64MHz
CLK1 SD_MCKIO (6)
6 2 CP21
VDD CLK2
2
DG
4 - 19
●MAIN CPU block
MA[0..25]
MA[0..25] ( 7)
+1.9V MD[0..31]
MD[0..31] ( 6,7,11 )
C32 DG
0.1uFFZ
MA0
MA1
MA2
MA3
MA4
MA5
MA6
MA7
MA8
MA9
MA10
MA11
MA12
MA13
MA14
MA15
MA16
MA17
MA18
MA19
MA20
MA21
MA22
MA23
MA24
MA25
MD0
MD1
MD2
MD3
MD4
MD5
MD6
MD7
MD8
MD9
MD10
MD11
MD12
MD13
MD14
MD15
MD16
MD17
MD18
MD19
MD20
MD21
MD22
MD23
MD24
MD25
MD26
MD27
MD28
MD29
MD30
MD31
C29
+1.9V C31 CP441 470pFCHJ CP129 CP127
0.1uFFZ CP128
(2) TCLK C33 R46 51F
(2) MCPUCLK 0.1uFFZ MWR0_1_L ( 4,13 )
CP22 CP23 R45 51F
R19 MWR0_2_L (6)
DG
R20 51F 10KF CP442 CP132 CP130
(6) MCKE CP68
CP24 CP131
( 2,7 ) MCKIO
CP25 R44 51F
MWR1_1_L ( 4,13 )
C30 IC1 R43 51F
(7) RTCDAT 470pFCHJ HD6417709AF133 MWR1_2_L ( 5,6,11 )
CP133
(7) RTCCLK
162
105
155
156
159
3
5
145
146
150
149
147
148
53
54
55
56
58
60
61
62
63
64
65
66
67
68
70
72
73
74
75
76
77
78
80
82
84
86
52
51
50
49
48
46
44
43
42
41
40
39
38
37
36
34
32
31
30
28
26
25
24
23
22
20
18
17
16
15
14
13
CP134
89 R42 51F CP447
WE0* MWR2_1_L (4)
90
WE1*
91 CP136 R283
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
RM1B WE2* 51F MWR2_2_L
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
D10
D11
D12
D13
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
( 11 )
CKE
+3.3V CP26 92 CP135
CAP1
CAP2
CKIO
EXBD10C103J
XTAL
WE3*
TCLK
XTAL2
157 CP138 R41 51F
EXTAL
Vcc-RTC
Vss-RTC
STATUS0 MWR3_1_L (4)
EXTAL2
Vcc-PLL1
Vcc-PLL2
Vss-PLL1
Vss-PLL2
1 7 158 110 CP376
STATUS1 CASU*
6 5 CP27 108 CP140 R222 22FCP137
CASL* MWR3_2_L ( 11 )
CP28 194 119 R39 51F CP139
CA RAS2U* MCASL_L (6)
193 107 R37 51F CP141
( 4,5,6,7,11,13 ) RESET_L RESETP* RAS2L* MRAS3L_L (6)
CP29 124 118 CP446
RESETM* RAS3U*
184 106 CP142 R36 51F CP143
RESETOUT* RAS3L* MRD_WR1_L ( 13 )
CP30 182 CP144 R282 51F CP145
( 12 )T.PANEL TCP_SEL_C WAKEUP* MRD_WR2_L (6)
CP31 93 CP147 R35 51F CP448
RD/WR* MRD_1_L ( 4,13 )
CP32 7 88 CP148 R34 51F
NMI RD* MRD_2_L ( 11 )
CP33 8 87 51F R284
(4) MIPL0_L IRL0* BS* MRD_3_L ( 5,7 )
CP34 9 122 CP149 CP146
(4) MIPL1_L IRL1* BREQ*
10 121 R33 51F
(4) MIPL2_L IRL2* BACK* MBS_L ( 4,13 )
11 123CP151 CP150
(4) MIPL3_L IRL3* WAIT* MWAIT_L (7)
12 CP153 CP152
DG IRQ4
CP35 160 96 CP155 R32 51F CP154
IRQOUT* CS0* FROMCS_L (5)
CP36 98 CP157 R31 51F CP156
CS2* LCDCCS_L ( 13 )
CP37 139 99 R30 51F
( 10 ) MTCK TCK CS3* SDRAMCS_L (6)
CP38 137 100CP159 R29 51F CP158
( 10 ) MTMS TMS CS4* IOCS_L (4)
CP39 CP40 136 101 CP161 CP160
( 10 ) MTRST_L TRST* CS5*
CP41 138 102 CP163 R28 51F CP162
MAIN_CPU
( 10 ) MTDI TDI CS6* LANCE1_L ( 11 )
R21 CP42120 103 R27 51F
( 10 ) MTDO TDO CE2A* LANPWDOWN_L ( 11 )
22F 128 104 R26 51F
( 10 ) MASEBRKAK_L ASEBRKAK* CE2B* LANCE2_L ( 11 )
CP43 127 126 CP164
( 10 ) MASEMD_L ASEMD0* IOIS16* DG
CP44 164 191 CP165
( 12 )KEY KEY_SC0 TxD0 DREQ0* MDREQ0_L ( 4)
CP45 171 MAIN_CPU 114
RxD0 DACK0*
165 189
( 12 )KEY KEY_SC1 SCPT[1] DRAK0 MDRAK0 ( 4)
CP46 166 CP166
( 12 )KEY KEY_SC2 TxD1
172 192
RxD1 DREQ1*
CP47 167 115
( 12 )T.PANEL TCP_SEL2 SCPT[3] DACK1* MDRACK1_L (7)
CP48 168 190 CP167
TxD2 DRAK1
CP49 174
( 12 )KEY KEY_DT0 RxD2
169 207
( 12 )KEY KEY_DT1 SCPT[5] DA[0] LCD_CONT ( 12 )
170 206 CP168
( 12 )KEY KEY_DT2 RTS2* DA[1]
176
CTS2*
CP50 112
PTJ[4] SCL ( 9)
CP51 125 113 CP169
DG ADTRG* PTJ[5] SDA ( 9)
CP52 199 CP170
(9) THERMAL_TEMP AN[0]
CP53 200 117 CP171
(6) LITIUM_V AN[1] PTE[3] LED0 ( 14 )
CP54 201 116
( 10 ) MARK_V AN[2] PTE[6] LED1 ( 14 )
202 94 CP172
(8) BATT_VOL AN[3] PTE[7] RTCCE ( 7)
203 CP173
(8) BATT_TMP AN[4]
CP55 204 188 CP174
AN[5] PTC[0] POWER_OFF_L ( 8,13 )KEY
187 CP175
PTC[1] THERMAL_ON_L (8)
SDA CP56 135 186 CP176
PTG[0] PTC[2] TCP_SEL0 ( 12 )T.PANEL
CP57 133 185 CP177
(8) AC_FAIL_L PTG[1] PTC[3] FROMVPON ( 5)
CP58 131 180 CP178
(8) AC_DETECT PTG[2] PTC[4] MVREF0 ( 10 )
CP59 DIPSW0 130 179 CP179
PTG[3] PTC[5] MVREF1 ( 10 )
DIPSW1 129 178
PTG[4] PTC[6] TCP_SEL1 ( 12 )T.PANEL
151 177
(8) BATT_STS PTH[6] PTC[7] SICRESET ( 9)
PTF[0]
PTF[1]
PTF[2]
PTF[3]
MD0
MD1
MD2
MD3
MD4
MD5
AVcc
AVss
AVss
Vcc
Vss
Vss
Vcc
Vss
Vcc
Vss
Vcc
Vss
Vcc
Vss
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
VccQ
VssQ
+5VDOWN_L
+3.3V +3.3V CP60
CP61
RM1A R22 10KF CP62
1
2
EXBD10C103J
1
6
29
27
81
79
21
19
35
33
47
45
59
57
71
69
85
83
97
95
R23 10KF
143
142
141
140
144
195
196
197
205
208
198
154
152
153
134
132
175
173
111
109
163
161
183
181
R24 10KF
C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49
DG 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ
CP64 DG
+
2
3
9
8
4
10
+
CP67 MMD0 +1.9V +1.9V +3.3V +3.3V +3.3V
MMD1
MMD2 DG DG DG DG DG DG
JP5
JP4
JP3
JP2
JP1
DG CP63
0F
0F
0F
4 - 20
●MAIN GA block
+3.3V
T023107*A RM10
EXBD10C103J
6
1
6
1
図面番号
RM11
EXBD10C103J
MDD[0..31]
( 7,13 ) MDD[0..31]
5
7
4
8
9
3
2
5
7
4
8
9
3
2
10
10
MAA[0..25]
( 7,13 ) MAA[0..25]
MDD0 E2
MDD1 E1
MDD2 E3
MDD3 C2
MDD4 E4
MDD5 A2
MDD6 D2
MDD7 B5
MDD8 D5
MDD9 A4
MDD10C5
MDD11B6
MDD12A5
MDD13D6
MDD14A6
MDD15A7
MDD16C7
MDD17D7
MDD18A8
MDD19B8
MDD20C8
MDD21B9
MDD22C9
MDD23D9
MDD24A10
MDD25B10
MDD26C10
MDD27A11
MDD28B11
MDD29C11
MDD30A12
MDD31B12
0.1uFFZ 0.1uFFZ
MAA0B15
MAA1C15
MAA2D15
MAA3A16
MAA4B16
MAA5C16
MAA6D16
MAA7A17
MAA8B17
MAA9C17
MAA10
MAA11
MAA12
MAA13
MAA14
MAA15
MAA16
MAA17
MAA18
MAA19
MAA20
MAA21
MAA22
MAA23
MAA24
MAA25
2
2
+ + + + IC2
FD00027-MC
A18
B18
C18
D18
A19
B19
C19
A20
B20
C20
D20
A21
B21
C21
A22
B22
C6
AF6
AE21
K24
L26
L25
L23
M26
M25
M24
M23
N26
R25
R24
R23
T26
E25
E23
F26
F25
F24
F23
G25
G24
G23
H26
H25
J26
J25
J24
J23
K26
C50 C51 C52 C53
DG 1.0UF/16V(T)3 1.0UF/16V(T)3 1.0UF/16V(T)3
1
1
1.0UF/16V(T)3
MA0
MA1
MA2
MA3
MA4
MA5
MA6
MA7
MA8
MA9
MD0
MD1
MD2
MD3
MD4
MD5
MD6
MD7
MD8
MD9
A15 D22
MA10
MA11
MA12
MA13
MA14
MA15
MA16
MA17
MA18
MA19
MA20
MA21
MA22
MA23
MA24
MA25
MD10
MD11
MD12
MD13
MD14
MD15
MD16
MD17
MD18
MD19
MD20
MD21
MD22
MD23
MD24
MD25
MD26
MD27
MD28
MD29
MD30
MD31
FMA0
FMA1
FMA2
FMA3
FMA4
FMA5
FMA6
FMA7
FMA8
FMA9
FMD0
FMD1
FMD2
FMD3
FMD4
FMD5
FMD6
FMD7
FMD8
FMD9
( 3,13 ) MRD_1_L MRD* FMBA0
HVDD
HVDD
HVDD
FMA10
FMA11
FMA12
FMD10
FMD11
FMD12
FMD13
FMD14
FMD15
B13 E26
( 3,13 ) MWR0_1_L MWR0* FMBA1
C13 R26
( 3,13 ) MWR1_1_L MWR1* FMCS*
CP212 D13 P26
(3) MWR2_1_L MWR2* FMRAS*
+3.3V D14 N23
R54 10KF ( 3 ) MWR3_1_L
D12
MWR3* FMCAS*
L24
MCS3* FMWE*
A13 DG T25
(3 ) IOCS_L MCS4* FMDQMU
T24
FMDQML
C12 A1 R12 P24
( 3,13 ) MBS_L MBS* NC NC FMCLK
D21 A3 R13 T23 CP193
(7) MGAWAIT_L MWAIT* NC NC FMCKE
B14 A26 R14 CP194
(2 ) GA_MCKIO MCKIO NC NC
B23 B1 R15 AF21 CP195
(3 ) MIPL0_L MIPL0* NC NC PHASE_A PHASE_A ( 10 )
B24 B2 R16 AC22 CP196
(3 ) MIPL1_L MIPL1* NC NC PHASE_B PHASE_B ( 10 )
B25 T11 AD22 CP197
(3 ) MIPL2_L MIPL2* NC MOTORI0_A MOTORI0_A ( 10 )
B26 B4 T12 AE22 CP198
(3 ) MIPL3_L MIPL3* NC NC MOTORI1_A MOTORI1_A ( 10 )
A24 C4 T13 AF22
(3 ) MDREQ0_L MDREQ0* NC NC MOTORI0_B MOTORI0_B ( 10 )
CP180 A25 C23 T14 AB23 CP199
(3 ) MDRAK0 MDRAK0 NC NC MOTORI1_B MOTORI1_B ( 10 )
CP181 C24 T15 CP200
NC NC
AD7 AC12 CP201
(7) IOR_L IOR* HEADUP* HEADUP_L ( 10 )
CP213 AE6 C25 T16 AF12
(7) IOW_L IOW* NC NC OVH* OVH_L (9)
CP183 AD8 C26 U4 AE15 CP202
R50 10KF AEN NC NC LED_ON_OFF LED_ON_OFF ( 10 )
CP182 CP184 AE7 D3 U23 CP203
IOCHRDY NC NC
R48 22F AF7 D4 W4 AF20 CP204
(6) SRAMCS_L IO1CS* NC NC TSCLK TSCLK (9)
AE8 D8 W23 AD20
(7) SIOCS_L IO2CS* NC NC TSLATCH TSLATCH (9)
CP214 AC14 D10 AC1 AE19
( 3,5,6,7,11,13 ) RESET_L RESET* NC NC TSDATA1_BLK TSDATA1_BLK (9)
CP185 D17 AC2 AF19
R51 10KF NC NC TSDATA2_BLK
CP215 AC6 D19 AC4 AD25 CP205
IRQ5* NC NC TSDATA1_BLU
CP216 AE5 D23 AC8 AC25 CP206
( 11 ) LANIRQ_L R52 10KF IRQ6* NC NC TSDATA2_BLU
AF5 D25 AC10 AF18
R53 10KF IRQ7* NC NC TSTRBE1_BLK TSTRBE1_BLK (9)
AD6 AD19
IRQ8* TSTRBE2_BLK TSTRBE2_BLK (9)
D26 AC17 AD18
NC NC TSTRBE1_BLU
MAIN_GA
H4 AC19 AE18
NC NC TSTRBE2_BLU
AE2 H23 AC23 AC18
TSTEN NC NC TGATEA1
AC20 K4 AC24 AF17
SCANEN NC NC TGATEA2
CP186 AE20 K23 AD1 AE17
DG ATPGEN NC NC TGATEB1
CP187 MAIN_GA L11 AD2 AD17
NC NC TGATEB2
CP188 AE3 L12 AD3 AF16
( 10 ) GTCK TCK NC NC TGATEC1
CP189 AF2 L13 AD4 AE16
( 10 ) GTMS TMS NC NC TGATEC2
CP190 CP191 AF4 L14 AD24 AD16 CP207
( 10 ) GTRST_L TRST NC NC TGATEC3
AF3 L15 AE23 CP208
( 10 ) GTDI TDI NC NC
R49 22F AE1 AC15
( 10 ) GTDO TDO TXDA TXDA (9)
CP192 L16 AE24 AF14 CP217
NC NC RXDA RXDA (9)
AD13 M11 AF1 AE14 1.0KF
(2) 32M_G TINCLK NC NC TXDB R47
AF11 M12 AF23 AD14
( 10 ) BUZZER GPTM9OUT NC NC RXDB
M13 AF24 AD21
NC NC IC100kHz IC100kHz ( 1,13 )
M14 AF26 AC21
NC NC IC100kHz* IC100kHz_L (1)
AF15 M15
(2) 7.3728M BRGIN NC
AD15 M16 AE10 CP209
BRGOUT NC ADDA0
N11 AF10 CP210 DG
NC ADDA1
*A AF13 N12 AE11 CP211
LCDCCLK NC AD_DATA AD_DATA ( 12 )
AE12 N13 AD11
(2) FMCCLK FMCCLK NC AD_CLK AD_CLK ( 12 )
AD10
AD_CS*/SHDN AD_CS ( 12 )
N14
NC
N15 AC9
NC DA_DATA
1 2 DG Y1 N16 AD9
SRD* NC DA_CS*
6 10 AB3 P11 AE9
SRDWR* NC DA_LOAD*
3 AA4 P12 AF9
SWE1* NC DA_REG*
9 AA3 P13
RM2 SCS0* NC
8 AA2 P14 AF8
EXBD10C103J SCS2* NC RSYNC
4 Y2 P15
SBS* NC
7 AB2 P16 V26
SWAIT* NC PFRAME
5 N2 R11 U24
SCKIO NC PLINE
1 2 AC5 U26
SIRQ0* PCLK
6 10 AB1 U25
SIRQ1* PDE
3 AE4 N24
SUBCPURESET* PBIAS
9 AA1 DG N25
RM3 SRAMCS* LCDENA
8 AB4
EXBD10C103J SRAMWE*
4
7
5
SA1
SA2
SA3
SA4
SA5
SA6
SA7
SA8
SA9
SA10
SA11
SA12
SA13
SA14
SA15
SA16
SD0
SD1
SD2
SD3
SD4
SD5
SD6
SD7
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
SD16
SD17
SD18
SD19
SD20
SD21
SD22
SD23
SD24
SD25
SD26
SD27
SD28
SD29
SD30
SD31
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
LVDD
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
PDAT0
PDAT1
PDAT2
PDAT3
PDAT4
PDAT5
PDAT6
PDAT7
PDAT8
PDAT9
PDAT10
PDAT11
PDAT12
PDAT13
PDAT14
PDAT15
PDAT16
PDAT17
J4
J3
J2
J1
F1
F3
F2
P4
P3
P2
P1
F4
C3
L4
L3
L2
L1
R4
R3
R2
R1
T4
T3
T2
B3
B7
C1
T1
G4
G3
G2
G1
H3
H2
H1
K3
K1
N4
U3
U2
U1
V4
V3
V2
V1
Y4
Y3
A9
D1
K2
N3
N1
M4
M3
M2
M1
W3
W1
W2
P23
P25
C14
E24
C22
A23
D11
G26
H24
K25
V23
A14
D24
Y26
V25
V24
Y25
Y24
Y23
AC3
AC7
AD5
W26
W25
W24
AF25
AB24
AB26
AC13
AC11
AC16
AE13
AB25
AC26
AE26
AE25
AD12
AD23
AA26
AA25
AA24
AA23
AD26
2
2
+ + + + +
2
10
3
9
8
4
7
5
2
10
3
9
8
4
7
5
2
10
3
9
8
4
7
5
2
10
3
9
8
4
7
5
2
10
3
9
8
4
7
5
2
10
3
9
8
4
7
5
+3.3V
C54 C55 C56 C57 C58 DG
4.7UF/6.3V(T)3 4.7UF/6.3V(T)3 4.7UF/6.3V(T)3 4.7UF/6.3V(T)3 4.7UF/6.3V(T)3
1
1
+3.3V
1
6
1
6
1
6
1
6
1
6
4 - 21
●FROM block
MDE[0..15]
(6) MDE[0..15]
MAB[0..25]
( 6,7,11 ) MAB[0..25]
F ROM U
32M/64M/128M
Intel Strate Frash
MD[0..31]
( 3,7,11 ) MD[0..31]
IC6
*A DG 32 33 MDE0
A0 DQ0
*A MAB1 28 35 MDE1
A1 DQ1
MD0 R61 33F MDE0 *A MAB2 27 38 MDE2
A2 DQ2
MD1 R62 33F MDE1 *A MAB3 26 40 MDE3
A3 DQ3
MD2 R63 33F MDE2 *A MAB4 25 44 MDE4
A4 DQ4
MD3 R64 33F MDE3 *A MAB5 24 46 MDE5
A5 DQ5
MD4 R65 33F MDE4 *A MAB6 23 49 MDE6
A6 DQ6
MD5 R66 33F MDE5 *A MAB7 22 51 MDE7
A7 DQ7
MD6 R67 33F MDE6 *A MAB8 20 34 MDE8
A8 DQ8
MD7 R68 33F MDE7 *A MAB9 19 36 MDE9
A9 DQ9
MD8 R69 33F MDE8 *A MAB10 18 39 MDE10
A10 DQ10
MD9 R70 33F MDE9 *A MAB11 17 41 MDE11
A11 DQ11
MD10 R71 33F MDE10 *A MAB12 13 45 MDE12
A12 DQ12
MD11 R72 33F MDE11 *A MAB13 12 47 MDE13
A13 DQ13
MD12 R73 33F MDE12 *A MAB14 11 50 MDE14 +3.3V
A14 DQ14
MD13 R74 33F MDE13 *A MAB15 10 52 MDE15
A15 DQ15
MD14 R75 33F MDE14 *A MAB16 8
A16
MD15 R76 33F MDE15 *A MAB17 7 9
A17 Vcc
*A MAB18 6 37
A18 Vcc
2
*A MAB19 5 + C61
A19 C63 C62
*A MAB20 4 1.0UF/16V(T)3
A20 0.01UFFZ 0.01UFFZ
*A MAB21 3
A21
*A MAB22 1 21
A22 GND
*A MAB23 30 48
1
NC GND
56 +3.3V
NC
DG
14 43
CE0 Vccq
2
CE1 C64
29
CE2 0.01UFFZ
+3.3V 54 42
OE# GND
55
WE#
FROM WR
JP10 JP11
MODE 31 15 DG
BYTE# Vpen
SHORT OPEN NORMAL 16 53
RP# STS
OPEN SHORT JTAG
E28F640J3A-120
(3) FROMCS_L
( 3,7 ) MRD_3_L
JP10
( 3,6,11 ) MWR1_2_L
0F JP11
CP219
( 10 ) FROMWR_L
( 3,4,6,7,11,13 ) RESET_L
+3.3V +3.3V
R57
10KF IC7C CP458
20
HD74LVC244A
6 14
(3) FROMVPON
1 19
10
DG
4 - 22
●SDRAM reset block
MDE[0..15]
(5) MDE[0..15]
MAB[0..25] +3.3V
( 3,7,11 ) MAB[0..25]
CP223
IC8 CP224
64M/128M MAB1
MAB2
23
24
A0 DQ0
2
4
CP225
CP226
MDE0
MDE1 C69
JP12 0F A1 DQ1
MAB13 MAB3 25 5 CP227 MDE2 0.1uFFZ C67 CP241
A2 DQ2 10UF/6.3V(T)3 C70
MAB4 26 7 CP228 MDE3
JP13 A3 DQ3 0.1uFFZ
MAB14 MAB5 29 8 CP229 MDE4 DG
A4 DQ4 VBAT (7)
2
0F MAB6 30 10 CP230 MDE5 IC9 +
A5 DQ5
MAB7 31 11 CP231 MDE6 CP239 MAX6365LKA29-T
A6 DQ6
MAB8 32 13 CP232 MDE7 5 6
A7 DQ7 VCC OUT
MAB9 33 42 CP233 MDE8 7
A8 DQ8 BATT
256M MAB10 34 44 CP234 MDE9 DG DG
1
A9 DQ9
MAB11 22 45 CP235 MDE10 CP240 2 8
JP14 A10/AP DQ10 CE IN CE OUT
MAB23 MAB12 35 47 CP236 MDE11
A11 DQ11
MAB13 36 48 CP237 MDE12 4
JP15 NC DQ12 MR
MAB24 40 50 CP238 MDE13 3 1
NC DQ13 GND RESET RESET_L ( 3,4,5,7,11,13 )
51 MDE14
2
16 27 +
(3) MRD_WR2_L WE Vcc
19 28 2
(3) SDRAMCS_L CS Vss C71
41 C65 1
Vss 0.01UFFZ
15 54 4.7UF/6.3V(T)3
(3) MWR0_2_L LDQM Vss
39 DG
1
( 3,5,11 ) MWR1_2_L UDQM BATTERY-CR-2032-UINT
3
Vccq
18 9 DG
(3) MRAS3L_L RAS Vccq ON MAIN BOARD
17 43 +3.3V
(3) MCASL_L CAS Vccq
37 49
(3) MCKE CKE Vccq RESETSW_L ( 10 )
2
38 6 +
(2) SD_MCKIO CLK Vssq
12
Vssq C72
46 C66
Vssq
3
4
52 0.01UFFZ 4.7UF/6.3V(T)3
Vssq
1
MT48LC8M16A2TG-75 SW1
DG B3FS-1000
RESET SW
1
2
+3.3VA
DG
CP460 *A
5
IC10
1
4
R59 LITIUM_V (3)
1.0MF 3
(4) SRAMCS_L R60
NJU7017F
100F
2
DG
4 - 23
●RTC/MAIN WAIT block
MA[0..25] MAA[0..25]
MA[0..25] MAA[0..25]
CP242
(3) ( 4,13 )
CP243 MD[0..31] MDD[0..31]
( 3,5,11 ) MD[0..31] MDD[0..31]
MA0 CP244 R81 51F MAA0 CP293
( 4,13 )
MA1 R82 51F CP245 MAA1 CP294
MA2 CP246 R83 51F MAA2 MD0 CP295 R130 33F MDD0
MA3 R84 51F CP247 MAA3 MD1 R131 33F CP296 MDD1
MA4 CP248 R85 51F MAA4 MD2 CP297 R132 33F MDD2
MA5 R86 51F CP249 MAA5 MD3 R133 33F CP298 MDD3
MA6 CP250 R87 51F MAA6 MD4 CP299 R134 33F MDD4
MA7 R88 51F CP251 MAA7 MD5 R135 33F CP300 MDD5
MA8 CP252 R89 51F MAA8 MD6 CP301 R136 33F MDD6
MA9 R90 51F CP253 MAA9 MD7 R137 33F CP302 MDD7
MA10 CP254 R91 51F MAA10 MD8 CP303 R138 33F MDD8
MA11 R92 51F CP255 MAA11 MD9 R139 33F CP304 MDD9
MA12 CP256 R93 51F MAA12 MD10 CP305 R140 33F MDD10
MA13 R94 51F CP257 MAA13 MD11 R141 33F CP306 MDD11
MA14 CP258 R95 51F MAA14 MD12 CP307 R142 33F MDD12
MA15 R96 51F CP259 MAA15 MD13 R143 33F CP308 MDD13
MA16 CP260 R97 51F MAA16 MD14 R144 33F MDD14
MA17 R98 51F CP261 MAA17 MD15 R145 33F MDD15
MA18 CP262 R99 51F MAA18 CP309
MA19 R100 51F CP263 MAA19 CP310
MA20 CP264 R101 51F MAA20 MD16 CP311 R146 62F MDD16
MA21 R102 51F CP265 MAA21 MD17 R147 62F CP312 MDD17
MA22 CP266 R103 51F MAA22 MD18 CP313 R148 62F MDD18
MA23 R104 51F CP267 MAA23 MD19 R149 62F CP314 MDD19
MA24 R105 51F MAA24 MD20 CP315 R150 62F MDD20
MA25 R106 51F MAA25 MD21 R151 62F CP316 MDD21
MAB[0..25] MD22 CP317 R152 62F MDD22
MAB[0..25]
MD23 R153 62F CP318 MDD23
( 5,6,11 )
CP269 MD24 CP319 R154 62F MDD24
MA0 R280 51F MAB0 MD25 R155 62F CP320 MDD25
MA1 R281 51F CP271 MAB1 MD26 CP321 R156 62F MDD26
(6) VBAT
MA2 R107 51F MAB2 MD27 R157 62F CP322 MDD27
MA3 R108 51F CP273 MAB3 MD28 CP323 R158 62F MDD28
MA4 R109 51F MAB4 IC11 MD29 R159 62F CP324 MDD29
MA5 R110 51F CP275 MAB5 8 7 MD30 R160 62F MDD30
CE0 VDD
MA6 R111 51F MAB6 13 MD31 R161 62F MDD31
(3) RTCCE CE1
MA7 R112 51F CP277 MAB7
MA8 R113 51F MAB8
MA9 R114 51F CP279 MAB9
MA10 R115 51F MAB10 11
(3) RTCCLK CLK
MA11 R116 51F CP281 MAB11
MA12 R117 51F MAB12
MA13 R118 51F CP283 MAB13
MA14 R119 51F CP445 MAB14 12
(3) RTCDAT DATA
MA15 R120 51F CP284 MAB15
MA16 R121 51F MAB16
MA17 R122 51F CP286 MAB17
MA18 R123 51F MAB18 2
FOUT
MA19 R124 51F CP288 MAB19 3
NC
MA20 R125 51F MAB20 4
NC C73
MA21 R126 51F CP290 MAB21 5
NC 0.1uFFZ
MA22 R127 51F MAB22 14 6
FCON NC
MA23 R128 51F MAB23
MA24 R129 51F MAB24
9
AIRQ
10 1
TIRQ GND1
( 3,5 ) MRD_3_L
(3) DG
MDRACK1_L
+3.3V CP325 IC12
R80 62F GAL16LV8C-15J RTC-4574SAA
1 12
R79 R78 ( 2,3 ) MCKIO I0/CLK I/O0
CP326 2 13
10KF 10KF ( 3,4,5,6,11,13 ) RESET_L
CP327 3
I1 I/O1
14
(4) MGAWAIT_L I2 I/O2
CP328 4 15
( 11 ) LANWAIT_L I3 I/O3
CP329 5 16
I4 I/O4
6 17 CP330
( 13 ) LCDWAIT_L I5 I/O5
7 18 51F
(4) SIOCS_L I6 I/O6
8 19
(4) IOR_L I7 I/O7 MWAIT_L (3)
9
(4) IOW_L I8 R162
11 +3.3V
I9/OE
20
VCC
DG C74
10 0.01UFFZ
GND
+3.3V
DG
R77
10KF SIO EN / MAIN WAIT
4 - 24
●POWER I/F block
+3.3VSTB
( 12 ) POWER_ON
*D
R163
(3 ) BATT_VOL
100F
D2 +3.3VA
3
1SS302
1 2
*D
DG
R164
(3 ) BATT_TMP
100F
D3 +3.3VA +3.3V
3
1SS302
1 2
IC7G
20
DG HD74LVC244A
5 15
(3 ) BATT_STS
(+3.3V)
1 19
10
(3 ) AC_FAIL_L
(3 ) AC_DETECT
20
HD74LVC244A CP331
7 13 +3.3V P7A
*C 1 AC_LED
(+3.3V)
R168 2 NC
+3.3V
IC13A 1KF 3 E1
CP332
1 19
*A 4 E1
HD74LVC04 CP333
14
10 20
( 3,13 ) POWER_OFF_L IC7H 5 E1
CP334
6 AC_FAIL*
1 2 HD74LVC244A CP335
7 CHARAGE
+3.3V 3 17 CP336
8 POWER ON RESET
CP337
C75 9 BATT_ERR
(+3.3V) CP338
0.1uFFZ 10 POWER_OFF
CP339
11 POWER_ON
7
1 19
10KF HD74LVC04 12 AC_DETECT
DG CP342
14
10
13 +3.3VSTB
*B CP343
14 BATT_VOL
3 4 *B CP340
(3) THERMAL_ON_L 15 BATT_TMP
*B 16 BATT_STS
*B 17 THERMAL_ON
18 NC
19 NC
7
DG *A 20 NC
( 12 ) POWER_ON_RESET
20FMN-SMT-A-TF
( 12 ) AC_LED
( 12 ) CHARAGE
DG
( 12 ) BATT_ERR
+3.3V
*A
IC13F
14
HD74LVC04
13 12
7
IC13C
14
HD74LVC04
5 6
M
A
I
N
B
O
A
R
D
材料 作成 部署
+3.3V
・ ・ DATE DEPT 名称
(+3.3V) 2002.03.08 開発技術部 TITLE
D FOLLOW
7
20
POWER I/F
C FOLLOW
HD74LVC04 APP CHK DSG SCALE
9 8 11 9 塩田 斧田 久野
'02 ・ 08 ・21 久野
8
HD74LVC244A
B FOLLOW '02 ・ 08 ・01 久野
許容差
h HIROSE
親図
T029035
シート
1 19
7
番号
10
DG
DG A FOLLOW '02 ・ 06 ・10 久野 鋭角処理 改番
ヒロセ電子システム株式会社 図面
T023111
4 - 25
●AMP THERMAL block
FROM AMP
RXD-A ( 11 )
+5V
+5V +5V
TXD-A ( 11 )
+5V
R171
100KF 1 2 +3.3V
IC15A IC14B CP346 P8
+SSR(
3
.
3ALSC
V
8
8
D4
DCENN
1
257 631 257 631 DG 1SS302
(4) RXDA 2
E)D
T
3
D5 +5V
4
3
TC7W14FU TC7W14FU 1SS302 +3.3V +3.3V +3.3V
G
5
1 2
6
DG DG 18-5085-006-000-808
DG R173 R174 R175 DG
(4) TXDA 10KF 10KF 10KF
+5V
(3) SDA
(3) SCL
(3) SICRESET R178
20KF
+2.5V
+5V +5V
R182 R176
1.0MF R179
IC16A CP347 7.5KF 10KF
CP461
8
UPC358G2
R181 3 +1.25V
8
20KF
5 1
7 2 R177
(4) OVH_L R180 100F 10KF
6
IC16B D6 +5V
(3) THERMAL_TEMP
3
UPC358G2 1SS302
4
1 2
4
D7 3 +3.3VA C76 C77 DG DG
1SS302 DG 0.1uFFZ 0.1uFFZ
1 2 DG
DG DG *B
+5V
R172 100F IC4E
DG L3 CP348
20
R183 22F BLM18BD471SN1
11 9
(4) TSLATCH
(+5V) +5V
3
HD74ACT244
1 2
1 19
10 20
IC4H L4 D15 CP349
R184 22F BLM18BD471SN1 DG 1SS302
17 3
(4) TSCLK
+5V
3
HD74ACT244
1 2 THERMAL CN
1 19
10 20
IC4C L5 D16 CP350 +24V +5V *A
R185 22F BLM18BD471SN1 DG 1SS302 P6B
6 14
(4) TSTRBE2_BLK 1 DATA OUT1
2 VH
(+5V) +5V
3
3
VH
HD74ACT244 4
1 2 STROBE1*
1 19
5 GND
10 20
IC4G 6 GND
L6 D17 CP351
R186 22F 1SS302 7 VH
BLM18BD471SN1 DG
8 VH
15 5
(4) TSTRBE1_BLK 9 VDD
10 LATCH*
(+5V) +5V
11
3
GND
HD74ACT244 12
1 2 GND
1 19
13 GND
10
14 GND
D18 CP353
1SS302 15 CLOCK
DG
16 STROBE2*
17 DATA IN1
18 DATA OUT2
19 VH
20 VH
21 GND
22 GND
IC4F 23 STROBE3*
L7 CP352
20
R187 22F 24 VH
BLM18BD471SN1
25 VH
13 7
(4) TSDATA1_BLK 26 DATA IN2
27 TM
(+5V) +5V
28
3
TM
HD74ACT244
DG 1 2 00-6208-500-028-600
1 19
10
D19 DG
DG 1SS302
*A
+5V
IC14C
8
M
A
I
N
B
O
A
R
D
+5V 257 631
材料 作成 部署
・ ・ DATE DEPT 名称
2002.03.08 開発技術部 TITLE
4
IC4D TC7W14FU
20
・ ・ 処理 承認 検図 設計 尺度
8
HD74ACT244
12 IC14A APP CHK DSG SCALE AMP
8
塩田 斧田 久野
(+5V) 257 631
・ ・ T HERMAL
B FOLLOW 許容差 親図
1 19
'02 ・ 10 ・13 久野
h HIROSE T029035
4
TC7W14FU
10
番号
DG
A FOLLOW '02 ・ 06 ・10 久野 鋭角処理
4 - 26 DG
NO. CONTENTS DATE REV.BY
ヒロセ電子システム株式会社 図面
番号 T023112
●SENSE/BUZZER/MOTOR DRV JTAG I/F block
T023113*B
図面番号 ( 4) HEADUP_L
+3.3VA +3.3V R188
R189
+3.3V C82 510F
1 2 IC17B 10KF
0.1uFFZ
IC17A MAX4163EUA
8
5
8
D8 MAX4163EUA
DG 1SS302 3 7 DG DG
1 6
3
( 3) MARK_V
2 C81
R194 0.1uFFZ
100F
4
C78 CP462
4
470pFCHJ DG DG
2
R192
D9
1SS302 FOR RECORDER
3 R190 CP355
100KF 100F +5V +3.3V
+5V +5V R193 R191
100KF
24KF DG CP356
IC15E
8
IC15F CP357
257 631 257 631 DG
1
R195 510F DG
( 4) LED_ON_OFF
*A
4
TC7W14FU P9B
TC7W14FU +5V
9 SW-ON
+24V_M
8 SW-COM
DG DG CP449
( 4) PHASE_B 7 MARK-COM
( 4) MOTORI0_B *A CP450 6 MARK-E
R292 22KF
( 4) MOTORI1_B 5 MARK-A
IC29 CP451
4 OUT4
+3.3V 15 CP452
Vcc 3 OUT3
16 13
PhaseB VmmB 2 OUT2
17 12
R169 I0B OUT4 1 OUT1
1 3 18
10KF I1B
Q2 20 10 DF13B-9P-1.25V(20)
R291 7.5KF VrefB RsB
UN2212 *B 19
VsB
C216 21 8
(3 ) MVREF0 R288 3.0KF CR OUT3
2
DG CP344
+3.3V 0.1uFFZ FIN
R290 7.5KF GND
CP345
DG R293 0.47F
R170 1 3 *B R289 3.0KF 22 7
10KF LG OUT2
Q3 23
VrefA R294 0.47F
UN2212 DG 24 5
VsA RsA
25
(3 ) MVREF1 I1A
26 3
2
I0A OUT1
DG 27 2
PhaseA VmmA
2
28 + C224 + C225 DG
( 4) MOTORI1_A Vcc
( 4) MOTORI0_A *A *A
C218 C219 MTD2007F 68UF/35V(C)4 68UF/35V(C)4
( 4) PHASE_A C217
0.1uFFZ
1
1000PFB1000PFB
+3.3V +3.3V DG
DG
R199 R201
10KF 10KF
+3.3V
RM12
R200 R202 EXBD10C103J
68F 68F
1
6
C80 C79
100pFCHJ 100pFCHJ JTAG CN
DG DG P5
3
9
8
4
7
5
10
( 3) MTCK 1 MTCK
( 3) MTRST_L 2 MTRST*
( 3) MTDO 3 MTDO
( 3) MTMS 4 MTMS
+5V
( 3) MTDI 5 MTDI
( 3) MASEBRKAK_L 6 MASEBRKAK*
7 FROMWR*
8 STCK
*A 9 STRST*
10 STDO
11 STMS
12 STDI
13 SASEBRKAK*
14 GND
*B ( 4) GTCK 15 GTCK
R197 BZ1
( 4) GTRST_L 16 GTRST*
2
D10 PKM13EPY-4002
3.92KF ( 4) GTDO 17 GTDO
( 4) GTMS 18 GTMS
3
( 4) GTDI 19 GTDI
20 RESET*
CP463 ( 6) RESETSW_L DF13-20DP-1.25V
1SS302
( 5) FROMWR_L
DG
1
CP464
2
R198 Q4 ( 3) MASEMD_L
3
(4 ) BUZZER 2SC2712
2KF JP16 MODE
OPEN MAIN MODE
SHORT ASE MODE
JP16
1
DG WL-1-2P
DG
4 - 27
●LAN PORT/AMP I/F block
NF1 NFM2012P13C474F
+3.3V CP358
1 3
2
+ +3.3V
2
2
+
1
4.7UF/6.3V(T)3
AGL C84 C87 C90 C88 C91 C92 C89
0.1uFFZ 0.01uFFZ 0.1uFFZ 0.01uFFZ 0.01uFFZ 0.1uFFZ
1
4.7UF/6.3V(T)3
DG
A
M
P
/
L
A
N
I
/
F
B
O
A
R
D
MAB[0..25]
( 5,6,7 ) MAB[0..25]
IC18 +5V *A
11
19
38
48
59
98
71
79
89
MD[0..31] LAN91C96
( 3,6,7 ) MD[0..31]
MAB0 26 85 CP382 CP392 P2B
A0 TPERXP
MAB1 27 84 CP383 CP393
MAB2 28
A1 TPERXN
75 CP384 R223 61.9F CP394
10
A2 TPETXP 9
VDD
VDD
VDD
VDD
VDD
VDD
MAB3 30 73 CP385 CP395
A3 TPETXN R224 422F 8
AVDD
AVDD
AVDD
MAB4 31 72 R233
A4 TPETXDP 1.2KF 7
MAB5 32 74 CP386
MAB6 33
A5 TPETXDN
CP387 R225 61.9F 6
A6 5
MAB7 34 70
MAB8 35
A7 TXLED
69 CP388 R226 422F 4
A8 RXLED 3
MAB9 36 67
A9 BSELED 2
68
LNKLED 1
MAB10 40 83 10FMN-SMT-A-TF
A12 RECP R229 R228 R227
MAB11 41 82
A13 RECN 300F 300F 300F
MAB12 42 81
A14 COLP
MAB13 43 80
A15 COLN
MAB14 44 77 DG
A16 TXP
MAB15 45 76
A17 TXN
MAB16 46
A18
MAB23 CP359 3 +3.3V
EEDI
CP360 2 AGL
EEDO
T
R
A
N
S
M
I
T
MD8 R205 22F CP361 55 4 +3.3V
D0 EECS
MD9 R206 22F CP362 56 5
D1 EESK LED1B ( 9) TXD-A
MD10 R207 22F CP363 57 CP389 680F
D2 R230 ( 9) RXD-A
MD11 R208 22F CP364 58 1
D3 ENEEP ( 1) B100kHz
MD12 R209 22F CP365 60 91 1 2
D4 EN16 ( 1) B100kHz_L
R
E
C
E
I
V
E
MD13 R210 22F CP366 61 96 SML-210MT
D5 IOS0
MD14 R211 22F CP367 62 97
D6 IOS1 LED2B
MD15 R212 22F CP368 63 99 CP390 680F
D7 IOS2 R231
MD0 R213 22F CP369 7 93
D8 ROM
MD1 R214 22F CP370 8 90 1 2
D9 XENDEC
L
I
N
K
MD2 R215 22F CP371 9 66 SML-210MT
D10 PWRDWN
MD3 R216 22F CP372 10
D11 LED3B
MD4 R217 22F CP373 12 CP391 680F
D12 R232
MD5 R218 22F CP374 13 DG
D13
MD6 R219 22F 14 1 2
D14
MD7 R220 22F 15 SML-210MT
D15
47
( 3 ) LANCE1_L CE1
24
( 3 ) LANCE2_L CE2
52
REG
51
(3) MRD_2_L OE LEDと抵抗は、量産時の時は
25
( 3,5,6 ) MWR1_2_L WE 実装しない。
49 37
(3) MWR2_2_L IORD FWE
50 39
(3) MWR3_2_L IOWR FCS
53
( 7 ) LANWAIT_L WAIT
23
IOCS16
18
INPACK
17
( 4 ) LANIRQ_L IREQ
+3.3V 20
INTR2
CP377 21
IC19B INTR3
5
TC7S04FU 65
RESET
2 4
( 3,4,5,6,7,13 ) RESET_L
94
XTAL1
CP378
95
XTAL2
88
3
RBIAS
DG
( 2) 20M_LAN
GND
GND
GND
GND
GND
GND
GND
GND
AGND
AGND
AGND
R203
12KF
6
16
22
29
54
64
92
78
86
87
100
CP379
R204
DG AGL 10KF
DG AGL
AGL
( 3 ) LANPWDOWN_L
4 - 28
●KEY/LCD I/F block
T023115*C +3.3V
図面番号
20
*B
IC7D
1 R235 100F
2 12 8 *B
( 3,13 ) POWER_KEY 1 2
HD74LVC244A
CP396
1 19
10
R234 100F DG
( 13 ) KEY_RESET_L
+3.3VSTB
D11 +3.3VSTB
1SS302
+3.3VSTB 1 2
7
IC20B
R236 100F 2 5
(8) POWER_ON D Q IC21C IC21A CP465 DG CP466
3
PR
1 7
5
2 1
3
6 7
5
2 1
3
6
CLK
3 R240 R264
Q
4
TC7W14FU TC7W14FU C93 10KF R241 15K
CL
TC7W74FU 0.1uFFZ 10KF *A
R295 15K
+3.3VSTB POWER ON/OFF
6
DG DG R265 7.15KF
R237 1KF
*C *A *A
DG DG R296 7.15KF
R238 10KF
(8) POWER_ON_RESET *A
R266 4.12KF
R239 10KF
*A
TP2 R297 4.12KF
TP_LAND
Q5
8
IC22B 2 3
8
5 IC22A
*A Q10 3 1 DTC124EUA
1 3 6 7 CP398
( 13 ) MAIN_POWER_OFF_L
2 Q6 DG LED1(BLUE) CP468
1
UN5212 TC7W08FU DTC124EUA
CP399 TC7W08FU 2 3
*A Q11
2
1 3 DG DG LED2(YELLOW) CP469
4
( 13 ) 5-SEC POWER_OFF_L Q7
DG
UN5212 DG 1 3
1
UN5212
F
O
R
M
O
P
E
R
A
T
I
O
N
P
C
B
DG
2
OFF_L ( 13 )
+15V +5V +3.3VSTB
2
Q8 DG
1 3
UN5212 *A
P3B
(8) AC_LED
VPCB+
SOHA1
TWAT5
B
(
+RGE
3
.
3
V
)
CP400
(8) CHARAGE 40
ERT
2
(8) BATT_ERR 39
ER
DG
38
_
R
R242 0F CP470
(3) KEY_SC0 37
VVW
R243 0F Q9 CP402
(3) KEY_SC1 36
+PCBK++++KKDDDDDKKKTTTTAAAPPPL
1OHAE5555EEGGGGGEEECCCCDDDFLCI
5 ATYVVVVYY
R244 0F 1 3 CP467
(3) KEY_SC2 35
ERT
RGEC
OE
N
(02
+
2V
0 V
V )
)
UN5212 CP404
34
(
+
2
)
33
_
R0
R
(
+
0
32
_
S
2
31
DG
30
29
CP406
28
27
_
S
CC
12
26
_
S
25
24
23
22
21
CP409
20
_Y
Y
D
TTTEEEEKT M
012LLLL A E
R245 L8 BLM18BD471SN1
(3) KEY_DT0 19
_Y
D
R246 1.0KF L9 BLM18BD471SN1 CP411
(3) KEY_DT1 18
_P
D
R247 1.0KF L10 BLM18BD471SN1
(3) KEY_DT2 17
_
S
102C
1.0KF +3.3V CP413
RM13 16
P
_
S
2 1
15
P
_
S
10 6 CP415
14
P
_
S
_
3
13
C_
_
L
9 +3.3V +3.3V +3.3V CP417
12
D_
A
3
3
8
11
CR
S
4 2 1 2 1 2 1 CP419
10
AEKN0123_
7
9
I
NLETTTTD
5 D12 D13 D14 CP421
8
1SS302 DG 1SS302 DG 1SS302 DG
EXBD10C103J 7
DDDDDC
A
R248 0F CP423
(3) TCP_SEL1 6
PPPPL
R249 0F
(3) TCP_SEL0 R250 0F 5
CP425
(3) TCP_SEL2 R251 0F 4
(3) TCP_SEL_C 3
2
C
O
N
T
R252 0F
(4) AD_CLK R253 0F 1
(4) AD_DATA R254 0F 40FMN-SMT-A-TF
(4) AD_CS R255 22F L11 BLM18BD471SN1
( 13 ) PFRAME R256 22F L12 BLM18BD471SN1
( 13 ) PLINE R257 22F L13 BLM18BD471SN1 DG
( 13 ) PCLK R258 22F L14 BLM18BD471SN1
( 13 ) LIDENA R259 22F L15 BLM18BD471SN1
( 13 ) PDT0 R260 22F L16 BLM18BD471SN1
( 13 ) PDT1 R261 22F L17 BLM18BD471SN1
( 13 ) PDT2 R262 22F L18 BLM18BD471SN1
( 13 ) PDT3 R263 0F
(3) LCD_CONT
4 - 29
●LCD controler block
MAA[0..25] MDD[0..31]
( 4,7 ) MAA[0..25] MDD[0..31] ( 4,7 )
IC23
MAA0 70
AB0
MAA1 69 19 MDD0
AB1 DB0
MAA2 68 18 MDD1
AB2 DB1
MAA3 67 17 MDD2
AB3 DB2
MAA4 66 16 MDD3
AB4 DB3
MAA5 65 15 MDD4
AB5 DB4
MAA6 64 14 MDD5
AB6 DB5
MAA7 63 13 MDD6 +3.3V
AB7 DB6
MAA8 62 12 MDD7
AB8 DB7
MAA9 59 11 MDD8
AB9 DB8
MAA10 58 9 MDD9
AB10 DB9
MAA11 57 8 MDD10
AB11 DB10 R268 R269 R270 R271
MAA12 56 7 MDD11
AB12 DB11 10KF 10KF 10KF 10KF
MAA13 55 6 MDD12
AB13 DB12
MAA14 54 5 MDD13
AB14 DB13
MAA15 53 4 MDD14
AB15 DB14
MAA16 45 3 MDD15
AB16 DB15
77 37
( 3,4 ) MWR0_1_L WE0* FPDAT0
78 36
( 3,4 ) MWR1_1_L WE1* FPDAT1
74 35 CP428
(3) LCDCCS_L CS* FPDAT2
71 34 CP429
(2) LCDCCKIO BCLK FPDAT3
75 33 CP430
( 3,4 ) MBS_L BS* FPDAT4 PDT0 ( 12 )
CP427 79 32 CP431
( 3) MRD_WR1_L RD/WR* FPDAT5 PDT1 ( 12 )
76 31 CP432
( 3,4 ) MRD_1_L R272 51F RD* FPDAT6 PDT2 ( 12 )
2 30 CP433
(7) LCDWAIT_L WAIT* FPDAT7 PDT3 ( 12 )
73 26 CP434
( 3,4,5,6,7,11 ) RESET_L RESET* FPDAT8
25 CP435
FPDAT9
51 24
(2) LCDCCLK2 CLKI FPDAT10
+3.3V 23 CP436
FPDAT11
49 CP437
CNF0
48 39 CP438
CNF1 FPFRAME PFRAME ( 12 )
47 38 CP439
CNF2 FPLINE PLINE ( 12 )
46 28
CNF3 FPSHIFT PCLK ( 12 )
43
LCDPWR LIDENA ( 12 )
22 42
GPIO0 DRDY
+3.3V 44
TESTEN
1 20
COREVDD VSS
21 27
COREVDD VSS
41 40
COREVDD VSS
61 50
COREVDD VSS
10 60
IOVDD VSS
29 72
IOVDD VSS
52 80
IOVDD VSS
2
+ C94 + C95
C96 C97 C98 C99 C100 C101 C102
1.0UF/16V(T)3 4.7UF/6.3V(T)3 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.1uFFZ 0.1uFFZ 0.1uFFZ S1D13705
1
DG
R267
+3.3V 10KF
+3.3V +3.3V
*A +3.3V
8
HD74LVC04
3
MAIN_POWER_OFF_L ( 12 )
11 10 6
( 3,8 ) POWER_OFF_L
TC7W08FU
*A +3.3VSTB
4
7
IC24 *A +3.3VSTB
DG *A +3.3VSTB 16
VCC
DG 9 IC25
Q1
C103 7 16
Q2 VCC
0.1uFFZ 8 6 9
GND Q3 Q1
5
IC26 5 C105 7
Q4 Q2
1 DG 3 0.1uFFZ 8 6
( 12 ) KEY_RESET_L Q5 GND Q3
4 11 2 5
CLR Q6 Q4
+3.3VSTB 2 4 DG 3
Q7 Q5
13 11 2
Q8 CLR Q6
IC21E TC7S32FU 12 4
Q9 Q7
8
Q11 Q9
1 10 14
( 12 ) OFF_L Q12 CK Q10
DG +3.3V 15
Q11
4
TC7W14FU 1
Q12
TC74VHC4040FT
TC74VHC4040FT
8
DG IC27A
1
( 1,4 ) IC100kHz
7
M
A
I
N
B
O
A
2
( 3,12 ) POWER_KEY 材料 作成 部署
TC7W08FU
・ ・ DATE DEPT 名称
2002.03.08 開発技術部 TITLE
L
C
D
C
O
N
4
・ ・ 処理 承認 検図 設計 尺度
DG APP CHK DSG SCALE
塩田 斧田 久野
4 - 30
●POWER LED block
+3.3V
C211
C128 C129 C130 C131 C132 C133 C134 C135 C136 C137 C207 0.1uFFZ +1.9V
POWER UNIT I/F CN (POWER) 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ
*A +3.3V
P1A
+3.3V 1
E1 2
2
+
+5V 3
C106
+5V 4 100UF/10V(C)5 C109 C110 C111 C138 C139 C140 C141 C145 C146 C147 C148 C149 C150 C151 C152 C208
E2 5 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.1uFFZ
+15V 6 1
E3 7
+24V_M 8
DG
E4 9
+24V 10
+24V 11
+3.3V
+24V 12
E5 13
E5 14
E5 15
DF13-15P-1.25H
C153 C154 C155 C156 C157 C158 C159 C160 C161 C162 C163 C164 C165
0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ
DG
+5V +3.3V
2
C112 C113 C114 C115 C116 C117 C118 C119 C120 C212 C213 C223 C226 C166 C167 C168 C169 C170 C171 C172 C173 C174 C175
0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ 0.01uFBJ
1
C107 (TC74VHC132FT)
100UF/10V(C)5
DG DG
+3.3V
CP440 +15V
C142 C143
0.1uFFZ 0.1uFFZ
2
+ C108
220UF/25V(C)4 DG
C126 C127 +5V
0.1uFFZ 0.1uFFZ
1
2
CP453 DG
1 2
+24V_M C144 C203 C206 C209 C210
0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ
1
C221
0.01uFBJ +3.3V
C205 +3.3VSTB
0.1uFFZ
20
CP354 +24V 0.1uFFZ 0.1uFFZ 0.1uFFZ DG LED5A
*A 4 16 1 2
TP1 (3) LED0
R273 (+3.3V) SML-210MT R275
2
1 19
C204 DG
10
0.1uFFZ
DG DG DG
1
20
680F LED6A
SML-210MT DG
2 18 1 2
(3) LED1
R274 (+3.3V) IC7A SML-210MT R276
10KF HD74LVC244A 680F
1 19
10
DG DG DG
4 - 31
ECG AMP BOARD Circuit Diagrams (PCB-6867A)
●AMP block
IC2A
E25F R23 3 IC5 ADS1252U R67
TLC2264C
5
1 R57 C2-F 1 4
10KF VIN+ CLK TC-74VHC00FT 300F
R1 C8 R10 2 2 5 DOUT3 IC14A IC15 +5VF
24KF R36 130F VIN- DOUT
C20 VREF 6 2 3 1
24KB SCLK R66 QA A
R21 300MM 150P 33P C29 8 3 4 2
VREF 300F QB B
10KF C1 Q1 R45 0.22uF 1 5
QC
0.1uF FMW2 E25F 69.8KB E25F 6
R24 QD
IC2B TC-74VHC00FT 10
R2 10KF QE
E25F 5 IC6 ADS1252U IC14B 11 8
35
TLC2264C TC-74VHC00FT QF CLK
R22 7 R58 R-F 1 4 4 IC14D 12
24KF R11 VIN+ CLK QG
10KF R37 C9 6
130F 2 5 DOUT0 6 13 13 9
VIN- DOUT QH CLR
300MM C21 VREF 3 6 5 11
150P 24KB 33P C30 8
+VS SCLK
7 12 TC-74VHC164FT
VREF AGND
Q2 R46 0.22uF +5VF +5VF
-2.5VF FMW2 E25F 69.8KB E25F +5V
R25 IC2C
R3 E25F 10KF 10 IC7 ADS1252U IC21
35
TLC2264C R59
8 C3-F 1 4
24KF R12 VIN+ CLK R82
R38 C10 9 2 5 DOUT4 TC-74VHC00FT R80 7 2
130F VIN- DOUT
4
5
3
300MM C22 VREF 6 IC14C 1.2KF
24KB SCLK 1.2KF
150P 33P C31 8 34 50 6 3
VREF DRDY1 RXD
Q3 R47 0.22uF 30
DRDY2
FMW2 E25F 69.8KB E25F E5F 28 47
DRDY3 TXD
CLK
R26 IC2D 26 HCPL2601 +5V +5V
SCLK
R4 10KF DRDY4
E25F 12 IC8 ADS1252U 22
35
TLC2264C DRDY5
R60
DSYNCN
14 L-F 1 4 20 56 +5VF IC22
24KF R13 VIN+ CLK DRDY6 NC
R39 C11 13 2 5 DOUT1 18 52 R85 8 R68
9
130F VIN- DOUT DRDY7 TP0 VCC
10
300MM C23 VREF 6 14 53 680F 2 7 300F
150P 24KB 33P C32 8
SCLK
12
DRDY8 TP1
54
VREF DRDY9 TP2
Q4 R48 0.22uF 10 55 3 6
DRDY10 TP3
FMW2 E25F 69.8KB E25F 8 25 5
R27 DRDY11 TSTEN E5F GND
IC3A 61
R5 10KF ADSEL +5VF
E25F 3 IC9 ADS1252U DOUT0 35
35
1
300MM C24 VREF 6 DOUT3 27 FD00026-AC
24KB SCLK DIN4 X1
150P 33P C33 8 DOUT4 23 R74
VREF DIN5
Q5 R49 0.22uF DOUT5 21 1MF 2
DIN6
FMW2 E25F 69.8KB E25F DOUT6 19
R28 DIN7
RDAG1-15SE1(F) IC3C DOUT7 15
R6 10KF DIN8
P2 E25F 10 IC10 ADS1252U 13 41 E5F
35
3
130F VIN- DOUT DIN11
2 C3 300MM C25 VREF 6 DOUT11 63 62 2 IC17
10 L 150P 24KB 33P C34 8
SCLK DIN7816 RESETN RESET
VREF
3 C4 Q6 R50 0.22uF 2
CS7816N
11 F FMW2 E25F 69.8KB E25F
4 C5 R29 IC3D 46 57
R7 10KF PORT2_0 PORT1_0
12 C1 E25F 12 IC11 ADS1252U 45 58 +5VF
35
VCLK
VDATA
VSTB
24KB SCLK 100KF 100KF
14 RF 150P 33P C35 8
VREF
7 C8 Q7 R51 0.22uF E5F E5F
15 FMW2 E25F 69.8KB E25F E5F
36
37
38
8 C9 R30 IC4A
R8 E25F 10KF 3 IC12 ADS1252U VREF MAX6025AEUR-T +2.5VF
35
TLC2264C
F
1
R43 C15 R17 2 2 5 DOUT7 3 R81 TXD
130F VIN- DOUT TXD-A (2)
E25F 300MM C27 VREF 6 1 RXD
24KB SCLK 1.2KF RXD-A (2)
2
150P 33P C36 8 C3 + 2 + 2 F100KHZ
VREF B100kHz (2)
L1 L2 Q8 R52 0.22uF C39 IC18A C86 C38 R35 F100KHZN B100kHz_L (2)
100uH 100uH FMW2 E25F 69.8KB E25F 0.1uF 22/4V OPA2350EA 22/10V 10KF C46
E25F 0.22uF 0.0022uF
R32 R65 E25F -2.5VF -2.5VF
3
1
150P 10KF 300F -2.5VF -2.5VF -2.5VF -2.5VF -2.5VF
3
C17 E25F
R78 5
E25F 10F +2.5VF
+5VF 7
3
E25F 6 R55
69.8KB
2
R33 2 1 IC18B + C40 R83
1.2KF
10KF OPA2350EA R56 2SK2112
D1 22/4V 69.8KB Q11
2
1SS302 E5F +5V 0.01uF
1
R69 C18 -2.5VF -2.5VF C48
1
100KF 560P Z1 3 3 D2
ZS1012 F1 1SS302
R72 +2.5VF +5VF IC20 D4 D5 TF16N0.50 R19
1MF REG103UA-5 CRS01 CRS01 8 T2 2 24KF
1
1 8
OUT Vin
1
TLC2252C 2 7
1
OUT Vin
2
IC1A C28 + 5
2
Enable
33P C41 6 4 C7 R20 *A
1
22/4V 7 1 0.1uF 24KF DG
2 1
Error
GND
NR
1
3 3 D3
+
IC1B Z2 15/16V C49 1SS302
2
R31 IC3B 5 + + + 5 3 ZS1012 C45 0.01uF
3
3
E25F TLC2252C
2
R9 10KF 5 7 +5VF IC13 ADS7816EB E25F C42
TLC2264C
5
2
R18 +IN DOUT
560P 300MM C16 C37 0.1uF 3 5
1
1
24KB -IN CS*/SHDN 2SK2112 1.2KF
C19 0.22uF
2
C47 Q9 E25FR53 -2.5VF C43 C4 C5 C44 D6 D7 F2
E25F E25F R54
IC4B 0.0022uF FMW2 69.8KB E25F -2.5VF 15/16V 0.1uF E5F 0.1uF 15/16V CRS01 CRS01 TF16N0.25
5 36.5KB E25F 69.8KB
TLC2264C R79
7 E25F
3
6 R75
51KF
R76
E
C
G
A
M
P
B
O
A
R
D
IC4C 10F 材料 作成 部署
10 TLC2264C
・ ・ DATE DEPT 名称
8 2002.03.08 開発技術部 TITLE
9
・ ・ 処理 承認 検図 設計 尺度
APP CHK DSG SCALE
・ ・ 塩田 斧田 久野 AMP
IC4D
1
3
12
B FOLLOW
TLC2264C 許容差 シ ート SHT.
14
'02 ・ 10 ・08 親図
13
久野
h HIROSE 番号 T029031
A FOLLOW '02 ・ 06 ・10 久野 鋭角処理 改 番 REV.
E25F NO. CONTENTS DATE REV.BY
ヒロセ電子システム株式会社 図面
番号 T023118 B
4 - 32
●LAN PORT block
+5V
LAN PORT
P1B
T1 NF1 P3B
1
1 16 1 8
2 TXD(+)
3 1 TXD(-)
2 14 2 7
4 2 RXD(+)
5 3 N.C
3 6
6 4 N.C
3 15
7 5 RXD(-)
TRANSMIT 4 5
8 6 N.C
9 7 N.C
PE-64681
10 8
6 11
FRAME
10FMN-BMTTR-A-TB
TM11R-5C-88
7 9
TXD-A (1)
RXD-A (1)
DG 8 RECEIVE 10
B100kHz (1)
B100kHz_L (1)
PE-65421
NF2
1 3
3Y06-230P1
2
C50 C51
0.01uFFZ 0.01uFFZ
DG
4 - 33
●Bypass condenser block
2
+ + + +
C77 C78 C79 C80
-2.5VF 10/10V 10/10V 10/10V 10/10V
AGND
1
1
ADS1251U
-2.5VF
VREF
*A *A *A *A *A
2
2
+ + + + +
C60 C81 C61 C82 C62 C83 C63 C84 C65 C85
0.1 0.1 0.1 0.1 0.1
3.3/10V 3.3/10V 3.3/10V 3.3/10V 3.3/10V
1
1
ADS1251U
-2.5VF
+2.5VF
V+
+2.5VF
V-
TLC2264C TLC2252C OPA2350EA
-2.5VF
+5V
C76
0.1
HCPL2601
DG
4 - 34
OPERATION BOARD (PCB-6866C)
DG
NSCB100 LED2B
CHARAGE
1 2
SML-012YT LED3B
BATT_ERR
1 2
+5V
2 10KF
D4 D3 D2 D1 Q1 CP9 CP12
2
1SS302 1SS302 1SS302 1SS302
3 3 3 3 1
R1
2SA1162 3.0KF
1 7
3
1
DG DG DG DG 6 2
3 5 5 3
TO T.PANEL IC1A
+5V 2 6
CP1 IC3C TC7WT125FU
TC7WT125FU
T
O
M
A
I
N
B
O
A
R
D
*A P1 CP2 Q2 CP10 CP13 IC2D +15V
2
5
CP3 2SA1162
xRref 8
CP4 1 2 4 CP48 +5V
7 1
xLref 7
CP5 CP49 P3A
xL
VP
SO
TW
B
(
+R
3
.
3
V
)
6 R2
C
H
A
R
A
G
ER
CP6 CP84 CP50
xR
E
5 1
1 7
3.0KF
B
A
T
T
_
E
R O
CP7 TC7S04FU 5 3 DG CP51
yU 4 2
+
1
5
V5
CP8 2 6 CP52
3
3
yUref 3 3
BLM18BD471SN1
BLM18BD471SN1
BLM18BD471SN1
BLM18BD471SN1
+
1P
VO
6 2 DG
yLref 2 IC3D TC7WT125FU 4
W
E
R
N
(2
+
2
0)
V
)
3 5 CP53
yL 1 5
C
H
A
R
A
G
E
(
++
0
V
CP83 CP54
IC1B 6
B
A
T
T
_
E
R
R
(
2
0
V
)
04-6232-108-102-800 CP55
7 1
Q3 TC7WT125FU 7
CP11 CP14 CP56
K
E
Y
_
S
C
0
8
3
L4 L5 L6 L7 2SC2712 5 3 CP57
+
5
V5
R4 R3 3.0KF 9
1 DG 2 6
++
V5
10KF 10
CP19
V5
IC8C TC7WT125FU 11
2
5 3 + +
+K
VE
12
2 6 CP58 C29 C28
Y
_
S
C
12
13
DG CP59 10uF/25V 10uF/25V
K
E
Y
_
S
C
2
7 1
IC8D TC7WT125FU 14
CP60
GD
D
D6 D5 15
+5V +5V 1 16
GD
1
1
4 VDD 16
2 15 DG
GD
7 1
1SS302 1SS302 6 2 17
1 2 1 2 3 14 +15V CP21
GD
COM 1 18
GK
4 13 *A
7 0 19
E
Y
_
D
T
0
CP85 CP15 5 DG12 CP61
5 3 20
K
E
Y
_
D
T
1
DG CP86 DG CP16 6 IC4D 11 CP20 CP62
R5 1.0KF INH A IC5A 21
K
E
Y
_
D
T
2
CP87 CP17 7 10 CP63
3
8
R6 1.0KF VEE B 22
T
C
P
_
S
E
L
1
CP88 CP18 8 9 3 UPC358G2 CP64
R7 1.0KF VSS C 23
T
C
P
_
S
E
L
0
1 CP65
R8 1.0KF 24
T
C
P
_
S
E
L
2
2 CP66
25
T
C
P
_
S
E
L
_
C
CP67
26
A
D
_
C
L
K
+5V +5V +5V CP68
27
3
C1 C2 C3 C4
A
D
_
D
A
T
A
+5V CP69
28
A
D
_
C
S
2 1 2 1 CP70
29
P
F
R
A
M
E
DG CP71
R9 30
P
L
I
N
E
D8 D7 CP72
31
P
C
L
K
1SS302 DG 1SS302 DG + + CP22 IC6 CP73
0.01UFFZ 0.01UFFZ 0.01UFFZ 0.01UFFZ C24 C25 C5 10KF ADS7816 32
L
I
D
E
N
A
CP74
0.1uFFZ 33
P
D
0T
T
DG 1 7 CP75
VREF DCLOCK 34
1.0uF/16V 1.0uF/16V 2 6 CP76
DP
P
1T
+IN DOUT 35
+5V 3 5 CP77
DP
2T
*A
1
-IN CS*/SHDN 36
3
TC4051BFT 8 CP78
DL
3D
*A VDD 37
2
DG 2 1 + + CP79
C
_
C
O
N
T
38
TO LCD DG C6
0.1uFFZ
C17
0.1uFFZ
C26 C27
39
*A CP24 +5V D10 4
GND 40
P2 CP25 IC7B 1SS302 DG
CP26 DG 1.0uF/16V 1.0uF/16V 40FMN-SMT-A-TF
1
S 12
CP27
CP1 11
CP28
CP2 10
CP29
NC 9
2 18
DISP OFF 8 A1 Y1
CP30 3 17
D0 7 A2 Y2
CP31 4 16
D1 6 A3 Y3
5 15
D2 5 A4 Y4 LCD_CONT (2)
6 14
D3 4 A5 Y5
7 13
VDD 3 A6 Y6
8 12 DG
VSS 2 A7 Y7
CP33 9 11
VEE 1 A8 Y8 ADC_CLK (2)
O
P
E
R
A
T
I
O
N
B
O
A
R
D
00-6207-34-19-12-000 1 DG
19
G1 LCD_POWER (2) 材料 作成 部署
DG
G2 ・ ・ DATE DEPT 名称
TC74HCT541AF 2002.03.08 開発技術部 TITLE
+15V
*A
・ ・ 処理 承認 検図 設計 尺度
IC5B
APP
塩田
CHK
斧田
DSG
久野
SCALE
TOUCH PANEL / LCD / KEY I
8
(for UPC358G2) (for TC7WT125FU) (for TC7WT125FU) (for TC7WT125FU) (for TC74HCT541AF) (for TC7WT125FU)
5 ・ ・
1
+15V +5V +5V +5V +5V +5V 7
h HIROSE
親図
番号 T029009
シー
A FOLLOW
UPC358G2
0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ 0.1uFFZ
'02 ・ 06 ・10 久野
4
鋭角処理 改番
DG DG DG DG DG DG DG
NO. CONTENTS DATE REV.BY
ヒロセ電子システム株式会社 図面
番号 T023121
4 - 35
●Back light block
CP34 CP35
+15V L3 LQH32CN100K21 D9 +28V
1 2
R11 CRS01
121KF *B
1
IC9 R12
100KF
CP37
SW
VIN
2
+ C10
CP36 4 3 C9 220UF/50V(C)
SHDN FB
UNMOUNT
1.0UF/50V(C)7
1
*B
R13
2
+ C7 *B 4.7KF
DG
C8
220UF/25V(C) 4.7UF/25V(C)7 LT1930ES5 C31
1000PF
2
1
DG
+28V
R17 R18
100KF 100KF
DG
CP41 IC10B CP43
2
IC10A CP39 5
8
UPC358G2
3 CP40 7 R20 3 Q4
(1 ) LCD_CONT R16 2SC3736
1 6 100F
2 100KF
LCD_POWER (1)
1
UPC358G2
4
DG *C
4
CP38 DG R19 CP42 C12
R15 R21 1.0UF/50V(C)7
100KF *E
3.3KF/2W C11
100KF
R14 0.01U
49.9KF
DG DG
*C CP96 L2 CP44
+15V Q8B
2SJ179 1 8
2
R22 R23
*C R24 2 7 7.15KF 7.15KF
CP94 *C CP95 20KF
3
IC12B
+5V 4 Q7 CP80
*C 6 1 3 3 6
IC11 5 CP45 4 L1 CP82 CP47
2
16 UN5212 P5
VCC TC74VHC00FT Q5
9 4 5 1 8 VFT1
Q1 2SC2873 1
7 DG NC
2
C32 *D
0.1uFFZ 8
GND
Q2
Q3
6
+5V
C13 CP46 3 C16 NC
2
3
LCD CFL
3
5 1.0UF/50V(C)7 + C14 CMD8R-471M 18P/4KV VFT2
Q4 C15 4
DG 3 CP92 OPEN 1 CP81 6
3
Q5 0.033U/100V
11 2 CP91 CP93 IL-G-4P-S3L2-SA
14
2
Q9
11 10 14 1
(1) ADC_CLK CK Q10 TC74VHC00FT TC74VHC00FT
13 15 FT-34
Q11
1
Q12
7
TC74VHC00FT CP90
DG
TC74VHC4040FT
DG
DG
O
P
E
R
A
T
I
O
E FOLLOW '02 ・ 10 ・21 久野
材料 作成
DATE
2002.03.08
部署
DEPT
開発技術部
名称
TITLE
D FOLLOW '02 ・ 10 ・18 久野 処理 承認 検図 設計 尺度
(for TC74VHC00FT) (for UPC358G2) C FOLLOW '02 ・ 10 ・04 久野
APP
塩田
CHK
斧田
DSG
久野
SCALE
BACK LIG
+5V +28V
*C
C33 C23
B FOLLOW '02 ・ 08 ・01 久野
許容差
h HIROSE
親図
番号 T029009
0.1uFFZ 0.01uFFZ
A FOLLOW '02 ・ 06 ・10 久野 鋭角処理
DG DG
NO CONTENTS DATE REV BY
ヒロセ電子システム株式会社 図面
番号 T023122
4 - 36
MAIN POWER SUPPLY
J1 J5
NC-187-10N JP2 F1 L1 C2 C5 L2 2SC2873-Y 2SJ529S DF13-15P-1.25V(20)
TR5-T 18u
ELF25C 250Vac 275Vac ELF18D
2.5A 012A 470p 0.22u 417F Q72 Q71 L71 R83 1W [0.047]
L ∼+ 12
ENE471D-10A
DSANR-3(UL)
1-1 1-2 R71
D4SB60L
275Vac 11 +24V
[2.2K]
2.2K
C7
R87 R88
C76
CR1
1u
F2
50V 4.7u
630V
R84
10
R81
Z1 Z2
R85
0.22u +
C1 TR5-T
C4
2.5A
uPC339G2
[270]
N ∼- CR73
15
[3.3K]
[1.5K]
[33K]
D3FS4A
C3
RD15MB2
C6
CR74A
U72C
U71E
R1
1W 220K
250Vac 1000p
1SS184
250Vac 470p
1SS272
275Vac
FG
R94
uPC339G2
R89
14
C71
C72
0.22u
C77
R95
R96
[1K]
C69
U71A5
CR74B
1SS272
T1 3 8 U71C11 E5
JTR-02B 2 +
uPC339G2
AC90~264V :47~63Hz 13
R93
+ +
[1K]
R97
4 13
- 10
35V 10000u
-
1/8W 10K
1/8W 10K
7
+
35V 2200u
4 1
0.1u
0.1u
3
12 4 -
6 1 +
2
R90
10K
U72A
uPC1251G2
10K
-
R74 R76
uPC1251G2
uPC339G2
C8 R8 4.7K 15K 4.7K 470K
uPC339G2
250V 1W 220K
0.047u 14
+
9
R79
C74
R72
10K
8
-
CR4
R92
R77
4.7K
CR75
CR76
MRA4006T3
U72B
0.01u
470K 5
R75
+
U71D
10K
C73
R2
R73
220K 5 6
15K
-
uPC1251G2
JP1
D1FL20U
220K R3
CR5
R78
C75
R80
R82
R86
R91
Q3
330p
RD12MB2
RD12MB2
22 10
220K R4 R9 R10
FS7VS 5VSTB
11 -16A Q4
47K
0.1u
47K
[47K]
[47K]
[47K]
R5 R6 12 FS7VS C9 THRMON
R11 R12 13 -16A 2KV 470p
220K 22
14
F4
22 10
Q1
C10 8 +24V_M
2KV 470p
FS1AS-16 CR6 L4 L5 0~0.3A
SHORT
D1FL20U B-20F-28 B-20F-28 R14
R7 1-Turn 1-Turn 1W 10
1K R15
1W 0.047
9 10
9
1 E4
L101
2
CR2
RD15MB2
7 1
15V
C104
R13 CR11
0.01u
SHORT
R101
CR3 47K 7 M1FL40 L102
4.7K
6 +15V
35V 100u
C102
0.1u
8
C101
1SS184 8
CR10
+ 3
P1
U101
120u
R102 0.1~0.5A
C11 1SS272
Q101
U1ZB20 CR9A 5 [15K]
R105
R106
0.22u DTC114EUA LM2672M-ADJ
CR102
R103
1SS184
6 3
R27
R21
[5.1K]
2
CR8 R17
R18
4 [2.2K]
10K
6 2
*C Q102 1
CR101
D3FS4A
17
CR9B 1SS272
C21 25V 0.47u
[3K]
25V 6.8u
100K
20 2 1 34
1/8W 6.2K
1/8W 6.2K
C105
3 +
R104
D3FS4A
100
2
U2 25v 1u + + +
C103
16
0.1u
9 [1.5K]
R28
C19 1
C24-A
C24
C25
R30
C29
C28
C27
M51995AFP
Z3
8
7
CR7
(D4-GR-LF2)
TLP621F
U1A
1SS184
47K
C31
10 DTC114EUA E3
35V 100u
25V 470u
47
15K
Q2
C20
50V 4.7u
50V 4.7u
OPEN
C13
18
ZS1027
17 19 7 12 11 13 14 25v 1u 15VON
25V 220u
1u
2SK2788
L111
25V 10u
R16
7 1 5V
47K
10u
C114
0.01u
3
L112
R111
4.7K
4 1 4
1000p
C12
C15
R19
R20
C16
C17
C18
R22
R26-B
R26-A
R29
C22
C23
C30
C14
C111
35V 100u
*C 3 8 +5V
OPEN
+
C26
82u
C112
3
0.1u
Q111 U111 R112 0.1~0.6A
270p
[22K]
[22K]
0.1u
0.1u
0.01u
[15K]
47
25V 1u
2200p
50V 4.7u
0.1u
R115
CR112
CR113
3
R113
[9.1K]
[150K]
2
5
4 [0]
6 2
Q112 1
CR111
D3FS4A
10V 33u
1/8W 510
C115
+
D3FS4A
3
D3FS4A
R114
C113
0.1u
2
[OPEN]
1
C51 C52 R52 20V L52 L53 CR53
630V 630V 1W 22 R56 12u 12u DF10SC4M 5
8 470p 470p 47K DTC114EUA E2
U20GL2C48A 12u 12u
L51
[150K]
5VON
R62
C54
C55
C56
R53
C57
1.2u
CR52
2SK3435-Z
M1FL40 CR50 + +
R54
L121
R63
M1FL40
OPEN R58
35V 1500u
35V 2200u
R55
50V 4.7u
50V 4.7u
1W 4.7K
C67
C68
C79
C80
10K 0 7 1 3.3V
C124
10u
0.01u
[33K]
L56
C64
C65
C66
9 8
Q51 L122
R121
+3.3V
4.7K
3 10 R59
SHORT + + + +
1
C121
35V 100u
2 8
3
R64
+
35V 100u
35V 100u
7 6
35V 100u
35V 100u
100 68u
0.1~0.5A
C53
C122
C50
R50
0.1u
R51
50V 4.7u
50V 4.7u
1
C60
C81
C58
C59
C63 Q121
MAX668EUB R61 [0] CR122
R126
DTC114EUA LM2672M-3.3
[3.3K]
DTC114EUA
0.01u R123 D3FS4A
50V 4.7u
50V 1u
+ +
10K
1W
68K
3 3 5
7 2
ACLED 2 [0.005] 4 [0]
35V 100u
35V 100u
5 Q122 6 2
CR123
0.1u
0.1u
3 2 4 1 1
CR121
1
D3FS4A
R65
1/8W 360
SF8G48
C125
6V 47u
3 +
20VSUB R124
C123
0.1u
DTC114EUA 2
Q52 [OPEN] C127
[10K]
1
630V
0.01u
VBAT(-) 2
DTC114EUA E1
C126
R125
R57
C61
C62
R60
C70
C170 C171
630V R170 630V SUPON 3.3VON
470p 1W 22 470p
220K
0.22u
25V 1u
47K
0.1u
0.1u
1K
10
VCHG(+) OVPTRG
C131
C132
C133
C134
C159
C160
C161
1/4W 4.7K
CR131
R131
+ + + + +
DE5LC40 GND
50V 4.7u
50V 4.7u
35V 100u
35V 100u
35V 100u
35V 100u
35V 100u
24VSUP
VCHG(-)
9
4 - 37
CHARGE
J6
6P-SCN
1 F3
+
VBAT(+)
451015
+ 2
TH 3
- 4
BATSNS
50V 4.7u
50V 4.7u
- 5
C152
C153
- 6
VBAT(-)
C138
C139
C136
C137
C157
C158
Q132
1.5K DE5LC20U
CR133
D3FS4A
+ + 2SJ529S +
C141 R135 C142
50V 4.7u
35V 100u
35V 100u
50V 4.7u
35V 100u
50V 4.7u
0.01u 4.7K
1000P
CR137
1SS184
VCHG(-) R137
1K
R136 Q134
0
CR140 DTC114EUA
1SS184 CR138 3
RD8.2MB2 BATON 2
CR139 U131
TA78L05F
1SS184
3 1
24VSUP
R138
R148
R152
C144
C155
C143
+ 2SK2315
[10K]
[150K]
Q135
[10K]
10V 33u
0.01u
50V 4.7u
CHGSTS
C145
R153
R149
R139
[10K]
1000p
[100]
[10K]
14 11
R140 R141 bq2004ESN R157 R156
47K 2K 6 U132 R145 330K
[0] [390]
R142
C147
4 7
C146
R146 330K
VTEMP
13 8
R147 1K
[2.7K]
R154
12
R150
9
0.1u
0.1u
C149
C150
C148
2
16
[4.7K]
[68K]
[2.7K]
R143
DTA114EUA
25V 1u
0.1u
1000p
Q136 1 R155
2
R151 [0]
3 R144
[4.7K]
2
CHGENA 10K
< VBAT(-) >
1
Q137
R158
DTC114EUA 1W [0.24]
< VCHG(-) >
C156
630V 0.01u
4 - 38
LOGIC 1
J3
00-6208-520-020-000
1
ACLED AC_LED
14 BATT_VOL
BATVOL
15 BATT_TMP
BATTMP
3.3STB
13 +3.3V STB
CR204B
1SS272
CR201A
CR201B
CR202A
TC74VHC132FT
TC74LCX244FT
TC74LCX240FT
TC74LCX02FT
1SS272
1SS272
1SS272
S-873325BUP-ALA
TC7W74FU
Q200 Q202
TLC393ID
1
DTA114EUA
2SC2873-Y R201 5
U203
U205
U204
U201
24VSUP
U206
U202
1
U200 2
100 4
Q201 3
10V 33u
14 20 20 14 8 8
0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
C204
C205
2 3 +
R200 2SC2712-Y
1u
19 19
VBAT(+) 2
3
100K 1 1
C201
C212
C213
C214
C215
C216
C217
CR200
10V 33u
RB400D
CR202B
CR203A
CR203B
CR204A
50V 4.7u
0.01u
1SS272
1SS272
1SS272
1SS272
C200
C202
C203
0.01u
+ 7 10 10 7 4 4
1
Q203
DTC114EUA
3 E1(DG)
4 E1(DG)
3.3RESET 5
E1(DG)
GND
3.3STB U205
TC74VHC132FT C220
4 Q204 630V 0.01u
VBATGOOD 6
470K TC74LCX240FT 8
22K 3 3 POWER_ON_RESET
BATSNS 17 3
2
1 2
TC74LCX244FT
TC74LCX244FT
TC74LCX244FT
CR207
TC74LCX02FT
BATDET
ACLED
R226
U203
100K
U206
U206
U206
U202
R224
1SS184
47K
TC74LCX240FT
5
7 5
50V 4.7u
4 6 8
+
C218
- 11 9 6
6 TLC393ID
C219
R225
U201
4.7K
0.1u
10
3.3RESET POWER_OFF
11
POWER_ON
U202 U204
R210 U206 R220
TC74LCX240FT
10K TC7W74FU
POWON TC74LCX244FT 1K 9
OVRVOL BATERR BATT_ERR
2 18
7
OVPLAT 15 5
C208 2
1
D
S
Q
5
SUPON U206 R221
3.3STB 0.1u
C 3 TC74LCX244FT 1K 16
R
Q
BATDET BATT_STS
11 9
6
U202 TC74LCX244FT 1K 12
[300K]
TC74LCX240FT 17 3
470K
11
13 9
12 10 TC74LCX240FT
8 12 8 BATON
R207
6 14
5VON U206 R223
U203 7
R205
U203 15 5
[150K]
TC74LCX244FT 1K
OPEN TC74LCX02FT TC74LCX02FT
TC74VHC132FT TC74VHC132FT TC74VHC132FT CHGSTS CHARGE
U205 U202 13 7
3
1 U202 R211 U205 U205 R213 TC74LCX240FT DTC114EUA
2 12
470K 470K
+
VBATOP 2
-
TLC393ID
3 9
8
11
4 16 15VON Q205
13 7 1 13
U201 1K 10 1K 6
TC74LCX240FT R212 3
AC FAIL
CMPREF R214 PWRFAIL 2
CR206A CR206B 1
1SS272 C210 C211 U206
R209
1SS272
17
100K
VBATGOOD 18 2
THERMAL_ON
0.1u 0.1u THONIN
C209 TC74LCX244FT
R206
C207
R215
R216
R217
R219
POWOFF
R218
[150K]
100K
100K
100K
100K
100K
0.01u
0.1u
4 - 39
LOGIC 2
[390]
4.7K
620
[470K]
R328
R334
R331
R349
[3.9K]
[39K]
[15K]
R300
R302
R303
R341
20VSUB
R340
10K
R320
[470K]
R335
10K
[150K]
R350
R329
[68K]
R332
[22K]
[220K]
200K
11 5
VTEMP +
+ 13 7
CR300A BAT≧14.4V ACDET
R313
R304
R307
R310
-
-
[150K]
R323
10K
R347
10 uPC339G2 6
R321
1SS184
U304
10K
U303
CR300B
[100K]
1SS184
[10K]
[10K]
[10K]
[10K]
R317
uPC1093T
uPC324G2
U304
R319
5
uPC324G2 BAT≧55℃
+
BAT≦8V
2
U303
1SS184
1SS184
1SS184
1SS184
S-80940CNNB-G9A R327
-
10
+ 8 9
14
4 uPC339G2 C316
-
U303 0.01u
8
+
1 9 4.7K
U300 BATDET
[100K]
-
3 1 2 4 uPC339G2
[47K]
U301 3
TA78L05F
R348
R351
7 + 1 U304 CR304A
2 -
1SS272 VBATOP
U302
1 3 6 uPC324G2
uPC339G2
2 12 R324
0.1u
CR301B
CR302B
CR302A
C306
CR301A
+ 14
U303 -
4.7K
BATTMP
1000p 13
C317
C308
CR303A BATDET 0.1u
C305
[220K]
C301
R318
[15K]
R325 1SS272
[3.3K]
[10K]
[620]
C300
[1K]
0.01u
0.01u
C304 OPEN C310 U304 CR304B
[150K]
0.1u
0.1u
50V 4.7u uPC324G2 1SS272
3.3STB R342
R305
R314
R311
R308
0.1u
R322
3
10V 33u
[100K]
C303
+ 1
+
BATVOL
R316
-
[470K]
2 4.7K
[1.5K]
R326
[100]
[220]
[100]
C323
C309
[68K] CR303B
R301
R330
R333
[150K]
[100K]
[150K]
R336
1SS272
R345
R306
R312
R315
R309
C307
[3.9K]
0.01u
R346 OPEN C315 3.3STB
[150K]
C312 C313
GND 0.1u 0.1u
C328
C327
C326
U306
U307 TC74VHC02FT
TC74VHCT240AFT 3
1
50V 4.7u
50V 4.7u
50V 4.7u
2
OVRVOL
17 3
5VSTB
POWOFF
TC74VHCT240AFT
TC74VHCT00AFT
12 1
11 5
BAT≧55℃
4
4
BATERR
TC74VHC02FT
6
TC7SET08FU
TC7SET08FU
15 5
R352
13 2
uPC339G2
uPC324G2
620
U306 U305
U307 U307
(D4-GR-LF2)
TLP621F
TC74VHC02FT TC74VHCT00AFT
TC74VHCT240AFT 9 TC74VHCT240AFT
10 10
8 8
BATDET CHGENA
R353
OPEN
U1B
U307
8 12 6 14
U303
U308
U305
U306
U304
U309
9
U309
U306
TC7SET08FU TC74VHC02FT 3 4 14 14 20 5 5
1
4
19
Q301
POWON 12
13
2
11
1
Q300 DTA114EUA
U307 DTC114EUA
2
1
12 11 7 7 10 3 3
TC74VHCT240AFT 3
3
ACDET OVPLAT 2
2 18 C318 C319 C320 C321 C322 1
0.1u 0.1u 0.1u 0.1u 0.1u
U305 U305
U307
TC74VHCT00AFT
TC74VHCT00AFT TC74VHCT240AFT
1
5 3
6
PWRFAIL
BAT≦8V 4
2 13 7
U307 U307
TC74VHCT240AFT TC74VHCT240AFT 100
THONIN 4 16 11 9
THRMON GND OVPTRG
R354
4 - 40
Electric Circuit Diagrams
MAGAZIN SW BOARD
S1 J1
1
1
2
2
3 DF4-2P-2C
FRAME
4
FRAME
ESE11SH2C
4 - 41
Chapter 4
+5V
PH1 J1
2
1 MARK-COM
2 MARK-E
Recording 1
4
3
DF4-3P-2C
MARK-A
paper 3
CN2253
4 - 42
Chapter 5
Spare Parts List
MAIN BOARD (PCB-6868B) ................................................................ 5-1
5-1
Chapter 5
5-2
Spare Parts List
P 8 Connector 18-5085-006-000-808 1
P 9 Connector DF13B-9P-1.25V(21) 1
Q 1 P-chanel MOS FET SI3443DV 1
Q 2 3 Digital transistor UN2212 2
Q 4 Silicon transistor 2SC2712 1
Q 5 6 Digital transistor DTC124EUA 2
Q 7 8 9 10 11 Digital transistor UN5212 5
R 1 19 22 23 24
25 50 51 52 53
54 57 77 78 79
166 169 170 173 174
Square chip resistor RK73H1J TD 10 K Ω F 40
175 176 177 189 199
201 204 238 239 240
241 267 268 269 270
271 273 274 278 285
R 2 Square chip resistor NPR1 0.051 Ω J 1
R 3 Square chip resistor RK73H1J TD 91 K Ω F 1
R 4 5 Square chip resistor RK73H1J TD 33 K Ω F 2
R 6 7 21 48 49
183 184 185 186 187
205 206 207 208 209
210 211 212 213 214 Square chip resistor RK73H1J TD 22 ΩF 35
215 216 217 218 219
220 222 255 256 257
258 259 260 261 262
R 8 9 10 11 20
26 27 28 29 30
31 32 33 34 35
36 37 39 41 42
43 44 45 46 81
82 83 84 85 86
87 88 89 90 91
92 93 94 95 96
Square chip resistor RK73H1J TD 51 ΩF 80
97 98 99 100 101
102 103 104 105 106
107 108 109 110 111
112 113 114 115 116
117 118 119 120 121
122 123 124 125 126
127 128 129 162 272
280 281 282 283 284
R 12 13 16 17 18
61 62 63 64 65
66 67 68 69 70
71 72 73 74 75
Square chip resistor RK73H1J TD 33 ΩF 37
76 130 131 132 133
134 135 136 137 138
139 140 141 142 143
144 145
R 47 168 237 245 246
Square chip resistor RK73H1J TD 1 K Ω F 6
247
R 58 233 Square chip resistor RK73H1J TD 1.2 K Ω F 2
R 59 182 Square chip resistor RK73H1J TD 1.0 M Ω F 2
R 60 163 164 172 180
Square chip resistor RK73H1J TD 100 Ω F 10
190 194 234 235 236
R 15 80 146 147 148
149 150 151 152 153
Square chip resistor RK73H1J TD 62 ΩF 18
154 155 156 157 158
159 160 161
R 198 Square chip resistor RK73H1J TD 2 K Ω F 1
5-3
Chapter 5
5-4
Spare Parts List
5-5
Chapter 5
5-6
Spare Parts List
5-7
Chapter 5
Q 8 FET 2SJ179 1
R 1 2 3 Square chip resistor RK73H1J TD 3.0 K Ω F 3
R 4 9 10 Square chip resistor RK73H1J TD 10 K Ω F 3
R 5 6 7 8 Square chip resistor RK73H1J TD 1.0 K Ω F 4
R 11 Square chip resistor RK73H1J TD 121 K Ω F 1
R 14 Square chip resistor RK73H1J TD 49.9 K Ω F 1
R 12 15 16 17 17 Square chip resistor RK73H1J TD 100 K Ω F 5
18 19
R 20 Square chip resistor RK73H1J TD 100 Ω F 1
R 13 Square chip resistor RK73H1J TD 4.7 K Ω F 1
R 21 Power chip resistor NPR2 TE 3.3KΩ 1
R 22 23 Square chip resistor RK73H1J TD 7.15K Ω F 2
R 24 Square chip resistor RK73H1J TD 20 K Ω F 1
S 1 2 3 4 5 Tact switch SKRAAAE010 7
6 7
S 8 9 10 Tact switch SKRAAAE010 0
Pretreated substrate T023141 1/5
Customer control number: PCB-6866C
(5/sheet circuit board)
Circuit diagram T023121*B 0
Circuit diagram T023122*D 0
5-8
Spare Parts List
5-9
Chapter 5
5 - 10
Spare Parts List
5 - 11
Chapter 5
5 - 12
Spare Parts List
5 - 13
Chapter 5
5 - 14
Chapter 6
Board Component Diagram
MAIN BOARD (PCB-6868B component side).................................... 6-1
MAIN BOARD (PCB-6868B soldering side) ....................................... 6-2
ECG AMP BOARD (PCB-6867A component side)............................. 6-3
ECG AMP BOARD (PCB-6867A soldering side)................................ 6-4
OPERATION BOARD (PCB-6866C component side) ........................ 6-5
OPERATION BOARD (PCB-6866C soldering side) ........................... 6-6
POWER1 BOARD (PCB-6863B component side) ............................. 6-7
POWER1 BOARD (PCB-6863B soldering side)................................. 6-8
POWER2 BOARD (PCB-6864B component side) ............................. 6-9
POWER2 BOARD (PCB-6864B soldering side)............................... 6-10
MARK SENSER BOARD (PCB-6865 component side) ................... 6-11
MAGAZIN BOARD (PCB-6862 component side)............................. 6-12
MAIN BOARD (PCB-6868B component side)
6-1
MAIN BOARD (PCB-6868B soldering side)
6-2
ECG AMP BOARD (PCB-6867A component side)
6-3
ECG AMP BOARD (PCB-6867A soldering side)
6-4
OPERATION BOARD (PCB-6866C component side)
6-5
OPERATION BOARD (PCB-6866C soldering side)
6-6
POWER1 BOARD (PCB-6863B component side)
6-7
POWER1 BOARD (PCB-6863B soldering side)
6-8
POWER2 BOARD (PCB-6864B component side)
6-9
POWER2 BOARD (PCB-6864B soldering side)
6 - 10
MARK SENSER BOARD (PCB-6865 component side)
6 - 11
MAGAZIN SW BOARD (PCB-6862 component side)
6 - 12
Chapter 7
Assembly Diagrams
Recorder 1/4 ........................................................................................ 7-1
Recorder 2/4 ........................................................................................ 7-2
Recorder 3/4 ........................................................................................ 7-3
Recorder 4/4 ........................................................................................ 7-4
External view of recorder ................................................................... 7-5
LCD module ......................................................................................... 7-6
Upper case........................................................................................... 7-7
ECG Amp ............................................................................................. 7-8
Main Board........................................................................................... 7-9
Power supply unit ............................................................................. 7-10
Lower case ........................................................................................ 7-11
General assembly diagram............................................................... 7-12
Recorder 1/4
8 1
A
6
A
2
5
2-E ring, nominal :4
4 8
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Magazine base 1
2 Push button (SU) 1
3 Button spring 1
4 Hook mounting shaft 1
5 Paper support SU 1
6 Hock 2
7 Platen rall 1
8 Bearing DDL-1150ZZ 2
9 Gear B 1
7- 1
Recorder 2/4
13
14 3
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Recorder base SU 1
2 Platen roll guide plate SU 1
3 Adjust screw 2
4 Gasket UC300284V0 1
5 Thermal head fixing collar 1
6 Thermal head spring 1
7 Thermal head fixing shaft 1
8 Thermal head fixing plate SU 1
9 Thermal head 1
10 Stopper plate 1
11 Motor 1
12 Gear A 1
13 Static electricity elimination felt 1
14 Motor hold sponge 1
7-2
Recorder 3/4
7 2
W sems M2.6x6
a
a 6
2-W sems M2.6x5
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Paper case SU 1
2 Hook bearing stand (A) SU 1
3 Magazine UP substrate 1
4 Hook bearing stand (B) 1
5 Mark sensor substrate 1
6 Paper guide 1
7 Brass spacer BSB-2607 2
7- 3
Recorder 4/4
2
2-E ring, nominal :3
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Recorder unit assembly diagram (1) 1
2 Recorder unit assembly diagram (2) 1
3 Recorder unit assembly diagram (3) 1
4 Magazin mounting shaft 2
5 Paper cutter 1
7-4
External view of recorder
7- 5
LCD module
No. Part No. Drawing No. Name and type Q’ty Remarks
1 9H6494 LCD 1
2 Touch panel 1
3 LCD mounting plate 1
7-6
Upper case
5
A
6
1
View from A
3
7
8
4-W sems M3x6
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Top cabinet 1
2-W sems M3x10 2 Switch sheet 1
2-W sems M3x6
3 Si packing, large 2
4 Si packing, small 2
5 Substrate power supply 1
6 CE Mark nameplate 1
7 Operation panel substrate assembly 1
8 LCD module assembly 1
7- 7
ECG Amp
W sems M3x6
2-W sems M3x14
10
4 2-W sems
M3x4
3
No. Part No. Drawing No. Name and type Q’ty Remarks
1 ECG AMP PWB 1
2 O-SUB connector cover 1
3 AMP top cover 1
4 AMP bottom cover 1
5 AMP insulation cover 1
6 AMP insulation sheet 1
7 Lid for AMP insulation cover 1
8 AMP insulation rear cover 1
9 Duracon spacer 1
10 Spacer 1
7-8
Main Board
1 2
No. Part No. Drawing No. Name and type Q’ty Remarks
1 MAIN PWB 1
2 Finger 1
3 Finger 2
7- 9
Power supply unit
1 3 5
4
4
No. Part No. Drawing No. Name and type Q’ty Remarks
1 POWER 1 BOARD 1
2 POWER 1 BOARD 1
3 BAT I/F CABLE 1
4 Copper spacer 12
5 Power supply isolation sheet 1
6 Grounding cable 1
7 - 10
Lower case
W sems M3x6
22
21
7 5 17 2
2 M6 nuts, 3 types
M6 flat washer
Attach adhesive tape
2-W sems
M3x4 2-W sems M3x10
1 15
2-W sems
M3x6
No. Part No. Drawing No. Name and type Q’ty Remarks
23
1 Bottom cabinet 1
2 Battery cover 1
3 Cartridge cover 1
4 Rubber seat 4
11 5 Ground terminal 1
6 Recorder lid 1
7 Paper sheet 1
10 8 Power supply shielded cover 1
4 9 Power supply insulation cover 1
Sticking with doubler-
faced adhesive tape 10 Power supply insulation sheet (A) 1
W sems M3x14
16 11 Power supply insulation sheet (B) 1
20
12 Power supply radiation sheet (A) 1
13 Power supply radiation sheet (B) 1
14 Power supply radiation sheet (C) 1
12
19 15 Brass spacer 2
13 16 Stay 2 2
14
3 17 Sponge rubber 1
18 Ribbon tape 1
7- 11
General assembly diagram
A
A
1
A
No. Part No. Drawing No. Name and type Q’ty Remarks
1 Lower case unit 1
2 Upper case unit 1
3 Recorder unit 1 4-W sems M3x14
7 - 12
Chapter 8
Technical Instructions Related to
EMC
Emission information CISPR11.......................................................... 8-2
8-1
Chapter 8
8-2
Technical Instructions Related to EMC
8-3
Chapter 8
Guidance and declaration by manufacturer – Electromagnetic emission – Other than life support system
The equipment is intended to be used in the electromagnetic environment designated below.
Client or user of the equipment is requested to confirm the equipment will be operated in such
environment.
IEC 60601 Conformity Guidance for electromagnetic
Immunity test
test level level environment
Any of portable and mobile RF
communication devices must not be
used within the recommended distance
of separation from any part of the
equipment as calculated by an
equation corresponding to the
transmitter frequency.
d = 1 .2 P 80MHz~800MHz
3VRMS
Conducted RF. 150kHz to
d = 2 .3 P 800MHz~2.5GHz
IEC 61000-4-6 80MHz 3V
where P is the rated output power in W
Radiated RF. 3V/m 3V/m of the transmitter specified by its
IEC 61000-4-3 80MHz to manufacturer, and d is the recommended
2.5GHz distance of separation in m.
(((・)))
Note 1. In case of 80 MHz and 800 MHz, apply a high frequency range.
Note 2. The guideline does not apply to all circumstances. The electromagnetic diffusion is affected by reflection and absorption by
structure, thing and person.
a. It is impossible to accurately and theoretically estimate the electric field intensity from a stationary sending station such as radio
telephone base station (cord-less), local portable radio station, amateur radio station, AM/FM radio broadcasting station and TV base
station. For correctly judging the environment of electromagnetism due to stationary RF sending station, proceed to a field
electromagnetism investigation. If the electric field intensity recorded at a site where the equipment is used exceeds the above applied
RF conformity level, watch the equipment to verify whether it operates properly or not. If its operation is found abnormal, the
equipment may have to be modified to match, be moved to another place or be subjected to supplementary means.
b. The electric field intensity must be 3 V/m or less over the entire frequency band of 150 MHz to 80 MHz.
8-4
Technical Instructions Related to EMC
Note 1. In case of 80 MHz to 800 MHz, apply a high frequency band for the separate distance.
Note 2. The guideline does not apply to all circumstances. The electromagnetic diffusion is
affected by reflection and absorption by structure, thing and person.
8-5
Chapter 8
8-6
39-4, Hongo 3-chome, Bunkyo-ku, Tokyo, Japan
Phone:+81-3-3815-2121 Fax:+81-3-3814-1222
4R2121 200301 ◯
F