You are on page 1of 1

Test 2

Study online at quizlet.com/_28v47

1. A c12x 30 is which of the following Channel 13. The two basic bolted joint types are bearing True
standard steel cross sections? where the load is transferred between members
by bearing on the bolts and slip critical where the
2. Connecting concrete to the steel reduced live load
load is transferred between members by friction
beams can have several deflections. i e stiffer
of the joint ture or false?
advantages such as floors
14. A W27x61 is which of the following standard steel W
3. Gypsum wallboard is a commonly True
cross sections? beam
used component of a fire rated
wood assembly? t or f 15. A w27x161 is a w-beam with a depth of 27 inches True
and having a nominal weight per foot of 161 lb/ft?
4. Gypsum wallboard is attached True
True or false?
using nails or screws? t or f
16. Which of the following is a bolt designation for A325
5. Gypsum wallboard is fire resistant the chemically
bolts commonly used in a structural steel frame
because bonded water
building construction?
molecules that are
part of the chemical 17. Which of the following siding materials is not Fiber
composition of prone to fungal decay? cement
gypsum must all be
converted to steam
before the material
disentragtes
6. The primary connection methods none of the above
for structural steel are bolting and
welding
7. A S18x54.7 is which of the S beam
following standard steel cross
sections?
8. The shear plane is the plane true
between two or more pieces under
load where the pieces tend to
move parellel to each other, but in
oppposite directions. the capacity
is greater with the threads
excluded from the shear plane? t
or f
9. Sips cannot be used with other False
construction systems? t or f
10. A steel beam which is made by True
composite by using shear
connectors, composite metal
decking and concrete is much
stronger and stiffer than a base
beam alone? t or f
11. Steel ribs in steel decinking allow False
for a stronger bond between the
concrete and the decking? t or f
12. The stuctural behavior of sips is like that of an I section

You might also like