Professional Documents
Culture Documents
OBJECTIVE: Analysis of Second Order Source Free Series RLC Circuit
OBJECTIVE: Analysis of Second Order Source Free Series RLC Circuit
TASK 1: Observe the response of RLC circuit when the switch changes its position after a
certain time specified to the switch.
TASK 2: Adjust the oscilloscope time base and voltage/div parameters for the observation of
the proper damping response. Measure the given specifications for the table below.
TASK 3: Verify the above observed response specifications of the table by solving it
manually (Calculated).
CIRCUIT NO: 1
Build a series RLC circuit with current source. Determine its response mathematically and
graphically.
R= 2kΩ, L= 1H & C= 2.5μF
CIRCUIT NO: 2
Build a series RLC circuit with current source. Determine its response mathematically and
graphically.
R= 100Ω, L= 0.5mH & C= 4μF
OBSERVATION TABLE:
S.NO L R C 𝑹
α = 𝟐𝑳 ωO =
𝟏 Damping Max. Time to Settling
(H) (Ω) (F) √𝐋𝐂 Case reach max time
Voltage
voltage ts
Vmax tp (sec)
(Volts) (sec)
CONCLUSION: