Professional Documents
Culture Documents
2020 by Rexroth
www.boschrexroth.com
Better understanding
Drive & Control Academy | Training Program 2020 General information 3
and application of
Industry 4.0.
Despite the increase in high-grade educational and academic Technical knowledge must become wider and therefore
degrees, there is a decrease in practical know-how leaving requires more and more training cooperations and
a widening qualification gap. The Drive & Control Academy partnerships to reach and inform the participants of the
focuses on practical basic and further training. training courses. As a result, you will find an overview of
the training courses of our licensed training course partner
With our learning systems with real industrial components, PMC Rail International Academy from Leverkusen in this
we provide you with up-to-date technical knowledge and catalog.
modules that make technology "tangible", literally.
Despite all the progress, one thing remains unchanged:
With our new high-tech pump learning system module, Qualification is exciting and enjoyable, motivates you to
Bosch Rexroth is not only a leading supplier, but also a leading user of we provide you with HTPPu practical knowledge and personal and entrepreneurial success and is a particularly
Industry 4.0. With our Drive & Control Academy, we transfer this knowledge activities in the updated training course. efficient measure to satisfy your curiosity for new
and our experience to trainers in companies and schools, as well as to technical knowledge.
universities: This includes training systems, single training sessions and The increasingly intelligent sensor technology and the
modern media. Practical with original industrial components. For instance, Internet of Things (IoT) must also remain transparent. As of We invite you to take a look at our catalogs for our current
with our modular training system mMS 4.0, allowing you to simulate an now, Bosch sensor experts address themselves to this task educational programs and to browse our websites and other
entire Industry 4.0 factory. with their own training courses. In this context, please also communication channels.
observe our new training course "EST-IoT-Gateway".
This and much more can be found in the chapter Bosch Rexroth AG
"Automation and Industry 4.0". Drive & Control Academy
www.boschrexroth.com/training/industry-4-0
Contents
directly to that
2020 Clicking on a he
section.
ading takes you
www.boschrexroth.com/trainingmedia
Your advantages in the Didactic eShop: All items and training courses from the The Drive & Control Academy is certified according to DIN EN ISO 9001:2008.
ff Convenient product selection and ordering didactic eShop are indicated by this icon.
ff Order placement 24/7
@
ff eLearning courses, animation packages and We look forward to seeing you in our Didactic eShop.
knowledge subscriptions are available immediately For more information and to register, please go to:
ff Online order tracking https://academy.boschrexroth.com/Rexroth
ff Security thanks to personal access data and SSL
encryption Methods Certified Bosch trainer qualification
Face-to-face and practical training with personal Bosch’s modular and certified trainer education
contact: direct communication and, above all, guarantees high-quality, sustainable, refresher
"handling" the components reinforce the theoretical training for trainers in soft skills and technical topics.
content. That is why the majority of Rexroth training Even very experienced trainers go back to school in
courses include practical exercises. With the support order to keep their fingers on the pulse of the times
of their trainers, the participants set up – and ensure that the knowledge of trainers flows
practical exercises on training systems using real smoothly to participants.
industrial components. The interaction of eLearning
and face-to-face courses, whether in preparation for,
during, or after the training, or even for independent
eLearning, considerably extends the toolbox of
methods and has numerous advantages.
www.boschrexroth.com/training
Training program
Your benefits … Information
ff Training courses tailored to your systems and machines … NewsLetter
… more
ff Training preparation, consulting and implementation by
Knowledge
competent and experienced trainers check per Videos,
animations
ff Detailed training documents specifically tailored to your course
application and the components and systems you use Training program
2020 by Rexroth
ff Customer-specific questions answered during the training
ff Adapted to suit your business needs: training location,
dates, duration, and break times
ff Travel times and expenses of participants are reduced or
www.boschrexroth.com
LW
Prerequisite
Appropriate facilities and media
Group of participants
HAVE WE SPARKED YOUR INTEREST
We would be happy to adapt our seminars to your
IN AN INDIVIDUAL TRAINING
individual target group. The success of the training eLearning
COURSE OR QUALIFICATION courses
Technical books
depends greatly on coordinating in advance.
CONCEPT?
We would be happy to make you an individual
offer.
Contact:
training@boschrexroth.de Software Tools
eTraining Automation Studio
Phone: +49 9352 18-1920 courses/webinar Scheme Editor
Virtual Classroom MTX micro Trainer
HYVOS
Didactics
eShop
www.boschrexroth.com/learnworld
www.boschrexroth.com/academy
Locations
BOCHUM HAMBURG MURRHARDT
Bosch Rexroth AG Bosch Rexroth AG Bosch Rexroth AG
Service Center Bochum Service Center Hamburg Fornsbacher Straße 92
Geisental 12a Essener Straße 4 71540 Murrhardt, Germany
44805 Bochum, Germany Valvo Park Phone: +49 7192 22-0
Phone: +49 9352 18-1920 22419 Hamburg, Germany training.erbach@boschrexroth.de
training@boschrexroth.de Phone: +49 9352 18-1920
training@boschrexroth.de
SAALFELD/
Hamburg BOXTEL (NL) UNTERWELLENBORN
Bosch Rexroth BV HORB bz-Saalfeld
Kruisbroeksestraat 1 Bosch Rexroth AG
Maxhüttenstraße 16
5281 RV Boxtel, Netherlands An den Kelterwiesen 14
07333 Unterwellenborn, Germany
Phone: +31 411 651-416 72160 Horb am Neckar, Germany
Phone: +49 3671 883-410
training@boschrexroth.nl Phone: +49 7451 92-1802
training@boschrexroth.de
training.horb@boschrexroth.de
DARMSTADT STUTTGART/
Saalfeld Technical University of Darmstadt KETSCH
Walldorf EtaFabrik, Campus Lichtwiese Bosch Rexroth BAD CANNSTATT
Eugen-Kogonstr. 4 Hardtwaldstraße 43 Bosch Rexroth AG
64287 Darmstadt, Germany 68775 Ketsch/Rhein, Germany Löwentorstraße 68-70
Darmstadt Lohr Phone: +49 9352 18-1920 Phone: +49 9352 18-1920 70376 Stuttgart/Bad Cannstatt, Germany
Schweinfurt training@boschrexroth.de training@boschrexroth.de Phone: +49 9352 18-1920
training@boschrexroth.de
Erbach Würzburg
EDE (NL) LEVERKUSEN
Ketsch Murrhardt Aeres Tech PMC Rail International Academy GmbH ULM
Zandlaan 29 Werkstättenstr. 18 Bosch Rexroth AG
6717 LN Ede, Netherlands 51379 Leverkusen Customer and Innovation Center
Stuttgart Phone: +31 88 020-6400 Phone: +49 2171 58088-0 Lise-Meitner-Str. 4
training.elchingen@boschrexroth.de training@boschrexroth.de 89081 Ulm
Horb Elchingen Linz (Austria) training@boschrexroth.de
Ulm Munich
ELCHINGEN LINZ (AT)
Bosch Rexroth AG Bosch Rexroth GmbH WALLDORF
Glockeraustraße 2 Petzoldstraße 12 Aus- und Fortbildungszentrum Walldorf
89275 Elchingen, Germany 4020 Linz | Austria Industriestraße 8
Buttikon (Switzerland) Phone: +49 7308 82-2111 Phone: +43732 7605-0 98639 Walldorf, Germany
training.elchingen@boschrexroth.de training@boschrexroth.at Phone: +49 3693 8986-0
training.elchingen@boschrexroth.de
ERBACH LOHR
Bosch Rexroth AG Bosch Rexroth AG
Training Center Erbach Bgm.-Dr.-Nebel-Straße 2
Berliner Str. 25 97816 Lohr am Main, Germany
Würzburg
64711 Erbach/Odenwald, Germany Phone: +49 9352 18-1920
Phone: +49 6062 78-600 training.erbach@boschrexroth.de
training.erbach@boschrexroth.de
Bosch Rexroth AG MUNICH
Drive & Control Academy GÜTERSLOH Bosch Rexroth AG
Nölle + Nordhorn GmbH Garching Sales Office
Bahnhofplatz 2 Carl-Bertelsmann-Straße 56 Parkring 4
97070 Würzburg, Germany 33332 Gütersloh, Germany 85748 Garching b. München, Germany
Further information on our Phone: +49 5241 8606-0 Phone: +49 9352 18-1920
locations can be found at: Phone: +49 9352 18-1920 info@nngt.de training@boschrexroth.de
www.boschrexroth.com/traininglocation training@boschrexroth.de training@boschrexroth.de
Key
In the Drive & Control Academy training program, we use the following icons to help
guide you through our training methods, products and general information:
NEU
@
@
3
Duration of training in days Blended learning
Training/items available
through Didactic eShop Project planning
Face-to-face training
(face-to-face)
Digital training
documentation (on tablet)
LW
Rexroth LearnWorld
Software
New training
courses
courses
In this section, we introduce you to newly developed training courses as well as
courses that have been extensively revised in recent years. These courses are
NEU
eDrive & Control
Academy
MOBILE HYDRAULICS/MOBILE ELECTRONICS
hydraulics
hydraulics
Industrial
Industrial
Code Course Page
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
eHTB Basic knowledge of hydraulics (eLearning)......................................................................................... 105
eHKS Hydraulic circuits and control types (eLearning)................................................................................ 106
eV-SM Valve technology – Control blocks of mobile hydraulics (eLearning).................................................. 107
eHGE Gear units (eLearning)........................................................................................................................ 108
HTM-OC Throttle control with practice intensive training................................................................................. 112
eDRIVE & CONTROL ACADEMY HTM-LS Load sensing controls with practice intensive training....................................................................... 113
Automation and
Automation and
HTM-LUDV LUDV with practice intensive training................................................................................................. 114
Industry 4.0
Industry 4.0
HTAS Stationary and mobile hydraulics – Axial piston units........................................................................ 117
HT-FLUIDS-MH Hydraulic fluids in mobile applications............................................................................................... 121
Code Course Page HTM-M4 M4 Product training............................................................................................................................ 122
eHTB Basic knowledge of hydraulics............................................................................................................ 28 HTM-M7 M7 Product training............................................................................................................................ 123
eHTVT Basic knowledge of valve technology.................................................................................................. 29 BODAS-Display-DI4 Introduction to the programming of a DI4 (HMI) with CODESYS and Rexroth software package...... 140
Electric drives
Electric drives
and controls
and controls
eHKS Hydraulic circuits and control types.................................................................................................... 30 Bosch-Diesel Bosch common rail systems and exhaust gas treatment systems in the field of OHW....................... 141
eV-SM Valve technology – Control blocks of mobile hydraulics..................................................................... 31 OHS-MH System training for off-highway specialists (mobile hydraulics)......................................................... 142
eHGE Gear units............................................................................................................................................ 32
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
INDUSTRIAL HYDRAULICS AUTOMATION AND INDUSTRY 4.0
Pneumatics
Pneumatics
Code Course Page Code Course Page
eHTB Basic knowledge of hydraulics............................................................................................................ 28 AT-IoT-Sens-Basic Technical introduction to the IoT sensor technology for factories of the future................................. 166
eHTVT Basic knowledge of valve technology.................................................................................................. 29 AT-IoT-Sens-Hack Connected sensor devices – Hackathon............................................................................................. 167
HTPPu Hydraulic pumps – Adjustment units and control equipment............................................................. 68 EST-IoT-Gateway Application of the IoT gateway............................................................................................................ 168
HTG-PRO Basics of project planning – Hydraulic switch valves.......................................................................... 74 HTP-CytroPac Commissioning CytroPac.................................................................................................................... 180
Safety technology
Safety technology
HTSY-PRO Planning and configuring hydraulic systems....................................................................................... 75
HT-FLUIDS-IH Hydraulic fluids in industrial applications........................................................................................... 87
HTP-CytroPac Commissioning CytroPac.................................................................................................................... 95
EH-SYT_SvP_I@ Sytronix SvP – Basics, parameterization and commissioning............................................................. 96
EH-SYT_FcP_IN@ Sytronix FcP/DRN 5020 – Parameterization and commissioning........................................................ 97
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
24 New training courses Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 New training courses 25
New training
New training
courses
courses
eDrive & Control
Academy
ELECTRIC DRIVES AND CONTROLS SAFETY TECHNOLOGY
hydraulics
hydraulics
Industrial
Industrial
Code Course Page Code Course Page
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
EST-IoT-Gateway Application of the IoT gateway............................................................................................................ 245 HT-HS
Liability and damages in maintenance during installation and operation of hydraulic machinery...... 302
Automation and
Automation and
Industry 4.0
Industry 4.0
Electric drives
Electric drives
and controls
and controls
Tightening
Tightening
systems
systems
WELDING TECHNOLOGY ENERGY EFFICIENCY
technology
technology
Welding
Welding
Code Course Page Code Course Page
EST-PRC7000-Basic PRC7x00 and PRI7000 basics......................................................................................................... 267 EH-SYT_SvP-I@ Sytronix SvP – Basics, parameterization and commissioning............................................................. 317
EST-PRC7000-Advanced PRC7x00 + PRI7000 Resistance welding basics of process technology......................................... 268 EH-SYT_FcP-IN@ Sytronix FcP/DRN 5020 – Parameterization and commissioning........................................................ 318
EST-PRC7000-Expert PRC7x00 + PRI7000 Resistance welding advanced knowledge...................................................... 269 DC-EE-INNO @ EtaFab 4EE Innovation day at the energy efficiency factory (EtaFab).............................................................. 319
Linear motion
Linear motion
and assembly
and assembly
DC-EE@Skype 4EE Online training – Energy efficiency in production and infrastructure........................................... 320
technology
technology
DC-EE-MAE-FCM Energy efficiency training – Combined module: “Machines, systems,
facilities (MAE) and infrastructure (FCM)”......................................................................................... 321
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
Drive & Control Academy | Training Program 2020 eDrive & Control Academy 27
New training
courses
Academy
Academy
We offer you qualified and certified eLearning for maximum flexibility in advanced training.
Try out our eLearning courses: www.boschrexroth.com/eLearning
hydraulics
Industrial
eHTB Basic knowledge of hydraulics...................................................................................... 28 NEW
eHTVT Basic knowledge of valve technology............................................................................ 29 NEW
eHKS Hydraulic circuits and control types.............................................................................. 30 NEW
eV-SM Valve technology – Control blocks of mobile hydraulics............................................... 31 NEW
Mobile electronics
Mobile hydraulics
eHGE Gear units...................................................................................................................... 32 NEW
eHTG Basic knowledge of hydraulics, complete (upon request)............................................ 33
eESTG Basic knowledge of electric control technology............................................................ 34
eEATG Basic knowledge of electric drive technology............................................................... 35
Automation and
ePTG Basic knowledge of pneumatics.................................................................................... 36
Industry 4.0
eLTG Basic knowledge of linear motion technology............................................................... 37
e4EE Basic knowledge of energy efficiency............................................................................ 38
e4EE Sytronix Energy efficiency of variable-speed pump drives........................................................... 39
eSEK Secondary controlled drives......................................................................................... 40
Electric drives
and controls
eSER Sercos – The automation bus........................................................................................ 41
LANGUAGES
All eLearning courses are available in English and German, and some in additional languages such as
Tightening
systems
Italian, French or Chinese. You have questions on the availability of eLearning courses in certain languages?
Please contact elearning@boschrexroth.de.
ORDERING INFORMATION
technology
Welding
Please send your orders indicating the desired eLearning course and invoicing address to the sales channel
known to you or to media@boschrexroth.de.
eTRAINING/WEBINAR
Linear motion
and assembly
technology
A trainer provides you with simple and concise information on exciting topics pertaining to @
technical further training – this is what awaits you in the eTraining courses or webinars from Rexroth.
Try out our eLearning courses or webinars: www.boschrexroth.com/eTraining
Pneumatics
PM_eT_HY_Filter Basic knowledge of hydraulic filters.............................................................................. 42
PM_eT_HY_Filter1 110LEN Hydraulic filter maintenance............................................................................ 42
PM_eT_MT_Ergo Workstation ergonomics............................................................................................... 43
Safety technology
DCA_eT_Controller Hydraulic control technology for motion control.......................................................... 44
BODAS-BT Basic training in BODAS mobile electronics................................................................. 45
eT-HT-FLUIDS Hydraulic fluids............................................................................................................. 46
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
28 eDrive & Control Academy Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 eDrive & Control Academy 29
eHTB eHTVT
Basic knowledge of hydraulics Basic knowledge of valve technology
New training
New training
courses
courses
eDrive & Control
Academy
hydraulics whereby the physical basics such as the connection between and addresses the different types of valves and applications. Shut-off,
force and mass and graphic symbols are discussed. Furthermore, directional, pressure and flow control valves are discussed.
the structure of hydraulic systems and the required components as well as
hydraulics
hydraulics
Industrial
Industrial
their functions are explained.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff General definition and typical applications Operators, service engineers, programmers, ff Valve types and their functions Operators, service engineers, programmers,
ff Connection between mass and force, planners/implementers, managers, trainers ff Comparison of the seat and spool principles planners/implementers, managers, trainers
pressure calculation, physical basics ff Valve types in hydraulic systems
ff Structure of a hydraulic system, function groups TRAINING TIME ff Valve selection TRAINING TIME
Automation and
Automation and
Industry 4.0
Industry 4.0
of the system and important components ff Stacking principles
During the license term, the eLearning is available During the license term, the eLearning is available
ff Representation of the components as
at any time. The license period is 12 months after at any time. The license period is 12 months after
graphic symbols LEARNING TARGET
activation. activation.
ff Task and mechanism of hydraulic pumps and
ff Being able to name the tasks and features of valves
common models, calculation of the pump capacity
Electric drives
Electric drives
and controls
and controls
Duration: approx. 7 to 8 hours ff Using valve types of various systems Duration: approx. 6 to 7 hours
ff Energy conversion of the hydraulic motors,
ff Being able to understand and explain stacking
efficiency of the motors
AVAILABLE LANGUAGES principles and the valve selection AVAILABLE LANGUAGES
ff Tasks and structure of hydraulic cylinders,
connection between speed, flow and piston force German, English German, English
PREREQUISITE
Tightening
Tightening
systems
systems
LEARNING TARGET PRICE ff Technical understanding PRICE
ff PC with Internet access, Flash Player 10 or
ff Introduction to hydraulics and hydraulic systems €336.00 (net) / €399.84 (gross) €240.00 (net) / €285.60 (gross)
higher: http://get.adobe.com/de/flashplayer
ff Being familiar with individual components and per year per year
ff Email address for personal login
technology
technology
their functions
Welding
Welding
ff Basic knowledge of technical physics Price for multi-user licenses upon request Price for multi-user licenses upon request
ff Understanding the basic structure of stationary
and mobile hydraulic systems NOTICE NOTICE
Linear motion
Linear motion
and assembly
and assembly
technology
technology
You can find the current offer online at: You can find the current offer online at:
PREREQUISITE
www.boschrexroth.com/elearning www.boschrexroth.com/elearning
ff Technical understanding
ff PC with Internet access, Flash Player 10 or
Pneumatics
Pneumatics
higher: http://get.adobe.com/de/flashplayer
ff Email address for personal login
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eHKS eV-SM
Hydraulic circuits and control types Valve technology –
New training
New training
courses
courses
Control blocks of mobile hydraulics
eDrive & Control
Academy
closed and open circuits. Circuit diagrams and the components used are of various series and designs. You will gain knowledge on energy controls
described here. Furthermore, different mobile hydraulic control types are and throttle, pump, load sensing and LUDV control systems.
presented.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TRAINING TIME CONTENTS TRAINING TIME
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Structure and function of a closed circuit During the license term, the eLearning is available ff Tasks of the control blocks During the license term, the eLearning is available
ff Structure and function of an open circuit at any time. The license period is 12 months after ff Different versions of the control blocks at any time. The license period is 12 months after
ff Various types of mobile hydraulic control systems activation. ff Various control types (throttle control, activation.
ff Control types and energy balance load sensing, etc.)
Automation and
Automation and
Industry 4.0
Industry 4.0
Duration: approx. 45 minutes ff Structure of various control blocks Duration: approx. 35 minutes
LEARNING TARGET
AVAILABLE LANGUAGES LEARNING TARGET AVAILABLE LANGUAGES
ff Mobile applications features
ff Function and area of application of the German, English ff Being able to name the tasks and features of German, English
Electric drives
Electric drives
and controls
and controls
closed circuit control blocks
ff Function and area of application of the PRICE ff The principle of energy control PRICE
open circuit ff Being familiar with the plate, monoblock and
€48.00 (net) / €57.12 (gross) €48.00 (net) / €57.12 (gross) per year
ff Describing the different types of mobile hydraulic combined design
per year
control systems and their tasks ff Control blocks of throttle, pump, load sensing
Tightening
Tightening
Price for multi-user licenses upon request
systems
systems
ff Explaining the main functions and the and LUDV control systems
Price for multi-user licenses upon request
energy balance
NOTICE
PREREQUISITE
NOTICE
PREREQUISITE You can find the current offer online at:
ff Technical understanding
technology
technology
You can find the current offer online at: www.boschrexroth.com/elearning
Welding
Welding
ff Technical understanding ff PC with Internet access, Flash Player 10 or
www.boschrexroth.com/elearning
ff PC with Internet access, Flash Player 10 or higher: http://get.adobe.com/de/flashplayer
higher: http://get.adobe.com/flashplayer ff Email address for personal login
ff Email address for personal login
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP
TARGET GROUP
Operators, service engineers, programmers,
Operators, service engineers, programmers, planners/implementers, managers, trainers
planners/implementers, managers, trainers
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eHGE eHTG
Gear units Basic knowledge of hydraulics
hydraulics, complete (upon
New training
New training
courses
courses
request)
eDrive & Control
Academy
and their functions as well as on the differences between the different hydraulic diagrams – many basics that hydraulic engineers need to know.
models. Furthermore, the course addresses the applications "driving",
"pivoting" and "lifting" by gears.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TRAINING TIME CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Main tasks of the planetary gearboxes in vehicles During the license term, the eLearning is available ff Hydraulics in general, hydraulic properties Operators, service engineers, programmers,
ff Distinguishing features of planetary gearboxes at any time. The license period is 12 months after ff Structure and function of hydraulic systems planners/implementers, executives, trainers
ff The most common gear types and their structure activation. ff Basic physical principles and their importance
ff Structure and function of planetary gearboxes for to hydraulics TRAINING TIME
Automation and
Automation and
Industry 4.0
Industry 4.0
driving with and without a dynamic brake and for Duration: approx. 35 minutes ff ISO 1219 symbols
During the license term, the eLearning is available
pivoting and lifting ff Hydraulic fluids
at any time. Licensing period upon request.
ff Installation situations AVAILABLE LANGUAGES ff Hydraulic pumps, hydraulic motors and cylinders
ff Control technology (shut-off, directional,
German, English Duration: approx. 20 to 25 hours
LEARNING TARGET pressure and flow control valves)
Electric drives
Electric drives
and controls
and controls
ff Preparing and reading simple circuit diagrams
ff Gaining knowledge on planetary gearboxes of PRICE AVAILABLE LANGUAGES
various types and applications
€24.00 (net) / €28.56 (gross) LEARNING TARGET German, English, Spanish, French, Hungarian, Italian,
ff Understanding the tasks of the gears
per year Dutch, Russian, Chinese
ff Understanding the basic structure of
Tightening
Tightening
systems
systems
PREREQUISITE hydraulic systems
Price for multi-user licenses upon request PRICE
ff Understanding the function and structure of
ff Technical understanding
select hydraulic components Available on request
ff PC with Internet access, Flash Player 10 or NOTICE
ff Being able to prepare hydraulic circuit diagrams
higher: http://get.adobe.com/de/flashplayer
technology
technology
You can find the current offer online at: ff Knowing how to efficiently work with technical NOTICE
Welding
Welding
ff Email address for personal login
www.boschrexroth.com/elearning documentation (data sheets, ISO 1219, etc.)
You can find the current offer online at:
ff Being able to use hydraulic systems in planning
TARGET GROUP www.boschrexroth.com/elearning
and day-to-day work
Linear motion
Linear motion
and assembly
and assembly
Operators, service engineers, programmers,
technology
technology
planners/implementers, managers, trainers PREREQUISITE
ff Technical understanding
ff PC with Internet access, Flash Player 10 or
Pneumatics
Pneumatics
higher: http://get.adobe.com/flashplayer
ff Email address for personal login
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eESTG eEATG
Basic knowledge of electric control technology Basic knowledge of electric drive technology
New training
New training
courses
courses
eDrive & Control
Academy
control technology. It is recommended for anyone who plans to attend drive components. It is recommended for anyone who plans to attend
intermediate training courses. You will learn the concepts of electric control intermediate training courses. Here, you will learn the concepts of electric
technology and gain an insight into industrial applications. drive systems and gain insight into industrial drive technology.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Basic introduction to electric control technology Operators, service engineers, programmers, ff Basic introduction to electric drive technology Operators, service engineers, programmers,
ff Programmable logic controls (PLC) planners/implementers, managers, trainers ff Electric motors, operating principles and planners/implementers, managers, trainers
ff Computer numerical controls (CNC) properties
ff Motion controls (MC) TRAINING TIME ff Basics of encoder systems TRAINING TIME
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Robot controls (RC) ff Drive controller and control procedures
During the license term, the eLearning is available During the license term, the eLearning is available
ff Sample application and programming ff Gears in drive technology
at any time. The licensing period is 12 months after at any time. The license period is 12 months after
ff Interfaces
activation. activation.
LEARNING TARGET
LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
Duration: approx. 3 to 4 hours ff Getting an overview of electric drive technology Duration: approx. 3 to 4 hours
ff Getting an overview of electric controls ff Understanding drive system concepts
ff Being familiar with the different types of controls AVAILABLE LANGUAGES ff Knowing about different drive components AVAILABLE LANGUAGES
including their uses (PLC, CNC, etc.) ff Being familiar with the different motor types
German, English German, English, Spanish
ff Gaining insight into programming a control and (synchronous, asynchronous) and how they work
Tightening
Tightening
systems
systems
its programming languages ff Gaining insight into encoder systems and their
PRICE PRICE
ff Knowing about interfaces from controls to humans functionality
and machines (e.g. HMI or field bus systems) When you book the ESTG-SPS-2G training course you ff Being familiar with different drive controllers and When you book the EATG-1 training course you will
ff Being familiar with sample applications will receive a 12-month single license for the eESTG control procedures receive a 12-month single license for the eEATG
technology
technology
eLearning course free of charge! ff Knowing about gears and how they work eLearning course free of charge!
Welding
Welding
PREREQUISITE
€66.00 (net) / €78.54 (gross) PREREQUISITE €66.00 (net) / €78.54 (gross)
ff Technical understanding
per year per year
ff PC with Internet access ff Technical understanding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Email address for personal login ff PC with Internet access
Price for multi-user licenses upon request Price for multi-user licenses upon request
ff Email address for personal login
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
ePTG eLTG
Basic knowledge of pneumatics Basic knowledge of linear motion technology
New training
New training
courses
courses
eDrive & Control
Academy
of pneumatic operating diagrams – many basics that pneumatic engineers this eLearning course is the ideal choice if you plan to attend intermediate
need to know. This eLearning is the right choice if you plan to attend training courses.
advanced training courses.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS TRAINING TIME
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Introduction to pneumatics Operators, service engineers, programmers, ff Introduction to linear motion technology During the license term, the eLearning is available
ff Basic principles of physics in pneumatics planners/implementers, managers, trainers ff Structure, function and uses of profiled at any time. The license period is 12 months after
ff Compressed air generation, compressor types, rail systems activation.
compressed-air drying techniques TRAINING TIME ff Structure, function and uses of linear bushings
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Maintenance units for preparation and and shafts Duration: approx. 12 to 18 hours
During the license term, the eLearning is available
compressed air networks ff Structure, function and uses of screw drives
at any time. The license period is 12 months after
ff Directional, flow, pressure and isolation valves ff Structure of linear motion systems AVAILABLE LANGUAGES
activation.
ff Pneumatic drives ff Overview of ready-to-install linear motion systems
German, English, Spanish
ff Graphical symbols, circuit diagrams according to
Electric drives
Electric drives
and controls
and controls
Duration: approx. 10 to 15 hours
DIN ISO 1219 LEARNING TARGET
PRICE
ff Basics design of components
AVAILABLE LANGUAGES ff Being familiar with the physical and theoretical
ff Pneumatic basic circuits This eLTG eLearning course is available as
principles of linear motion technology
German, English a single-user or multi-user license.
ff Knowing the structure, function and uses of linear
Tightening
Tightening
LEARNING TARGET
systems
systems
motion components
PRICE €216.00 (net) / €257.04 (gross) per year
ff Understanding the basic setup of ff Selecting appropriate linear motion components
pneumatic systems When you book the PTG training course you will
Price for multi-user licenses upon request
ff Understanding the function and setup of selected receive a 12-month single license for the ePTG PREREQUISITE
technology
technology
pneumatic components eLearning course free of charge!
Welding
Welding
ff Technical understanding NOTICE
ff Reading and preparing pneumatic operating
ff PC with Internet access, Flash Player 10 or
diagrams €185.00 (net) / €220.15 (gross) per year We also offer to conduct the LTG – Basic Knowledge
higher: http://get.adobe.com/de/flashplayer
ff Handling pneumatic systems during planning and of Linear Motion Technology two-day classroom
ff Email address for personal login
Linear motion
Linear motion
and assembly
and assembly
in everyday operations Price for multi-user licenses upon request training course either at your location or in our
technology
technology
company. In this case, the training package includes
TARGET GROUP
PREREQUISITE the eLTG eLearning course for all participants.
Operators, service engineers, programmers,
ff Technical understanding
planners/implementers, managers, trainers Try out our eLearning courses using a free guest
Pneumatics
Pneumatics
ff PC with Internet access, Flash Player 10 or
account: www.boschrexroth.com/elearning
higher: http://get.adobe.com/flashplayer
ff Email address for personal login
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
eDrive & Control
Academy
Intelligent automation solutions become more and more important. hydraulics and the energy efficiency and dynamics of compact electronics go
Prerequisites are familiarity with energy efficiency and how it can be hand in hand. In the e4EE Sytronix eLearning course, we provide you with the
implemented effectively. In this eLearning course, we provide you with the necessary basic knowledge and technical background as well as specialist
hydraulics
hydraulics
Industrial
Industrial
necessary basic knowledge. knowledge pertaining to the "Smart interplay of hydraulics and electronics".
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Energy, a scarce resource During the license term, the eLearning is available ff Energy, a scarce resource ff Completion of the HTG/eHTB and eHTVT, EATG-1
ff Definition of energy efficiency at any time. The license period is 12 months after ff Definition of energy efficiency and HTPPu training courses or comparable
ff Basic conditions activation. ff Basic conditions knowledge
ff Energy efficiency in the company ff Energy efficiency in the company ff PC with Internet access, Flash Player 10 or
Automation and
Automation and
ff 4EE concept from Rexroth higher: http://get.adobe.com/de/flashplayer
Industry 4.0
Industry 4.0
ff 4EE concept from Rexroth Duration: approx. 1 to 2 hours
ff Useful facts about energy efficiency ff Useful facts about energy efficiency ff Email address for personal login
AVAILABLE LANGUAGES ff Valve and displacer control
LEARNING TARGET ff Demand control TARGET GROUP
German, English
ff Components of variable-speed pump drives
Electric drives
Electric drives
and controls
and controls
ff Understanding the importance of energy efficiency Operators, service engineers, programmers,
ff Parameters for selecting such drives
to society and companies PRICE planners/implementers, managers, trainers
ff Circuit examples
ff Knowing the 4EE concept from Rexroth for
This e4EE eLearning course is available as ff System comparison
optimizing energy efficiency TRAINING TIME
a single-user or multi-user license.
ff Understanding the typical approaches to
Tightening
Tightening
LEARNING TARGET During the license term, the eLearning is available
systems
systems
system optimization
€23.00 (net) / €27.37 (gross) at any time. The license period is 12 months after
ff Understanding the costs and benefits of ff Understanding the importance of energy efficiency
per year activation.
energy-efficient solutions to society and companies
ff Knowing the 4EE concept from Rexroth for
Price for multi-user licenses upon request Duration: approx. 3 to 4 hours
technology
technology
PREREQUISITE optimizing energy efficiency
Welding
Welding
ff Knowing typical approaches to system
ff Technical understanding AVAILABLE LANGUAGES
optimization
ff PC with Internet access, Flash Player 10 or
ff Understanding the costs and benefits of German, English
higher: http://get.adobe.com/de/flashplayer
Linear motion
Linear motion
and assembly
and assembly
energy-efficient solutions
technology
technology
ff email address for personal login
ff System knowledge PRICE
ff Knowing how to adjust the operating behavior of
TARGET GROUP This e4EE Sytronix eLearning course is available as
individual components
a single-user or multi-user license.
Operators, service engineers, programmers, ff Being familiar with project planning aids for
Pneumatics
Pneumatics
planners/implementers, managers, trainers designing entire systems
€66.00 (net) / €78.54 (gross) per year
ff Knowing about work cycles and possibilities of
energy recovery
Price for multi-user licenses upon request
ff Knowing how power units are designed
Safety technology
Safety technology
ff Being able to select drive components
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eSEK eSER
Secondary controlled drives Sercos – The automation bus
New training
New training
courses
courses
eDrive & Control
Academy
hydraulic drive technology in theory and practice. Using practical – many things that you as a user of controllers, electric and hydraulic
application examples, you will get to know this drive technology from drives, valves and I/Os need to know. We recommend this eLearning course
Rexroth first hand. Various application options are explained. if you use products with Sercos interfaces or want to learn more about the
hydraulics
hydraulics
Industrial
Industrial
Sercos automation bus.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Comparison of various drive systems Operators, service engineers, programmers, ff Overview of the Sercos automation bus
ff Introduction to electric and conventional planners/implementers, managers, trainers ff Applications of Sercos in industrial automation
hydraulic drive technologies ff Technical details about Sercos
ff Introduction to secondary-controlled drives TRAINING TIME ff Properties and use of Sercos
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Components of a secondary unit
During the license term, the eLearning is available
ff Control of secondary-controlled drives LEARNING TARGET
at any time. The license period is 12 months after
ff Application examples from real life TRAINING TIME
activation. ff Understanding the Sercos automation bus
ff Knowing the applications of Sercos in industrial ff Duration: approx. 1 to 2 hours
LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
Duration: approx. 2 to 3 hours automation ff The training contents are available 24 hours a day
ff Getting an overview of various electric ff Being able to describe technical details of Sercos
drive systems AVAILABLE LANGUAGES ff Being able to describe the properties and AVAILABLE LANGUAGES
ff Identifying the advantages and disadvantages of advantages of Sercos
German, English German, English
these drive systems
Tightening
Tightening
systems
systems
ff Gaining an insight into secondary control PREREQUISITE
PRICE PRICE
technology
ff Technical understanding
ff Understanding examples of uses for €23.00 (net) / €27.37 (gross) Free
ff PC with Internet access, Flash Player 10 or
secondary-controlled drives per year
higher: http://get.adobe.com/de/flashplayer
technology
technology
ff Recognizing application possibilities or secondary NOTICE
Welding
Welding
ff Email address for personal login
controlled drives Price for multi-user licenses upon request
Start this eLearning course using a free guest
TARGET GROUP account: www.boschrexroth.com/eLearning
PREREQUISITE
Linear motion
Linear motion
and assembly
and assembly
Operators, service engineers, programmers,
technology
technology
ff Technical understanding
planners/implementers, managers, trainers
ff PC with Internet access, Flash Player 10 or
higher: http://get.adobe.com/flashplayer
ff Email address for personal login
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
PM_eT_HY_Filter PM_eT_MT_Ergo
Basic knowledge of hydraulic filters Workstation ergonomics
New training
New training
courses
courses
CONTENTS PREREQUISITE CONTENTS TARGET GROUP
eDrive & Control
Academy
ff Rexroth's filter product range and MTM
ff Rexroth filters and their application TARGET GROUP ff Working according to ergonomics advisors: TRAINING TIME
ff Filter design with the Filter Select online tool Service technicians, planners/application engineers working height, working area, area within reach,
ff Duration: approx. 25 minutes
ff Finding replacement filter elements with Fit4Filter parts supply, areas within view, lighting, adjusting
ff The training contents are available 24 hours a day
ff Oil measuring technology: how do you determine
hydraulics
hydraulics
TRAINING TIME
Industrial
Industrial
equipment, planning materials
the condition of your fluid? ff Practical tips and feasibility study
ff Duration: approx. 45 minutes AVAILABLE LANGUAGES
ff Oil treatment ff Implementation with Rexroth components
ff The training contents are available 24 hours a day
ff Service, oil analysis German, English
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Changing filter elements LEARNING TARGET
AVAILABLE LANGUAGES
PRICE
LEARNING TARGET German, English ff Gaining basic knowledge of arranging an ergonomic
workstation (functional areas and anthropometry, Free
ff Knowing the principles of filtration,
PRICE energetic work, informational work)
Automation and
Automation and
oil measurement technology and oil treatment
NOTICE
Industry 4.0
Industry 4.0
ff Knowing the basics of anatomy
ff Being familiar with and able to distinguish Free
ff Being able to lay out a healthy workstation
between products ff Access via www.boschrexroth.com/eTraining
NOTICE ff No registration required
ff Understanding areas of application
PREREQUISITE
ff Being able to independently design a filter ff Access via www.boschrexroth.com/eTraining
Electric drives
Electric drives
and controls
and controls
ff Being able to find, order and change replacement ff No registration required Basic familiarity with assembly lines
filters
ff Being familiar with Rexroth Filter Service
PM_eT_HY_Filter1
Tightening
Tightening
systems
systems
110LEN Hydraulic filter maintenance
CONTENTS TRAINING TIME
technology
Welding
Welding
ff Preparing filters for installation ff The training contents are available 24 hours a day
ff Replacing filters correctly
AVAILABLE LANGUAGES
LEARNING TARGET
Linear motion
Linear motion
and assembly
and assembly
German, English
technology
technology
ff Knowing how to correctly replace filter cartridges
and entire filters PRICE
Free
PREREQUISITE
Pneumatics
Pneumatics
ff Technical understanding NOTICE
ff Basic knowledge of hydraulics by completing the ff see above
HTG/eHTB and eHTVT training courses
Safety technology
Safety technology
TARGET GROUP
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
DCA_eT_Controller eT-BODAS-BT
Hydraulic control technology Basic training in BODAS mobile electronics
New training
New training
courses
courses
for motion control
eDrive & Control
Academy
ff Why a controlled system? Service technicians, planners/application engineers System, in your experiences with Rexroth hydraulic components? Find out
ff System components: valve, cylinder, which potential the conjunction of mobile electronics and hydraulics has.
position sensors TRAINING TIME
ff Cavitation: cause and prevention
hydraulics
hydraulics
Industrial
Industrial
ff Duration: approx. 60 minutes
ff Positive and negative feedback
ff The training contents are available 24 hours a day
ff Compressibility and mass-spring system
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LEARNING TARGET
English ff Requirements for mobile electronics Operators, service engineers, programmers,
ff Being able to differentiate between ff Structure and function of electronic components: planners/implementers, managers, trainers
control/regulation -- Control units
PRICE
ff Understanding component impact/effect -- Sensors, joysticks, displays TRAINING TIME
Automation and
Automation and
ff Being able to assess hydraulic factors for Free
Industry 4.0
Industry 4.0
-- Software, tools
closed-loop gain ff Duration: approx. 2 hours
ff Introduction to the pin assignments of
ff Understanding and being able to avoid cavitation NOTICE ff Training content available 24 hours per day
RC control units
ff Understanding and being able to assess ff Software functions and options as well as the
ff Access via www.boschrexroth.com/eTraining AVAILABLE LANGUAGES
peculiarities of hydraulic control technology BODAS-design and BODAS-service programming
Electric drives
Electric drives
ff No registration required
and controls
and controls
tools German, English
PREREQUISITE
Tightening
systems
systems
HTG/eHTB and eHTVT training courses sensors, actuators and control units in mobile
electronics Price for multi-user licenses upon request
ff Understanding how software and software tools
function
technology
technology
ff Knowing about BODAS systems and components
Welding
Welding
PREREQUISITE
ff Technical understanding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff PC with Internet access, Flash Player 10 or
higher: http://get.adobe.com/flashplayer
ff Email address for personal login
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eT-HT-FLUIDS
Hydraulic fluids
New training
courses
eDrive & Control
composition, properties and standardization of Price for multi-user licenses upon request
various hydraulic fluids as well as their use
Linear motion
and assembly
PREREQUISITE
technology
ff Technical understanding
ff PC with Internet access, Flash Player 10 or
higher: http://get.adobe.com/flashplayer
Pneumatics
@
NEU LW
Energy efficiency
Pneumatics Linear motion Welding Tightening Electric drives Automation and Mobile hydraulics Industrial eDrive & Control New training
and assembly technology systems and controls Industry 4.0 Mobile electronics hydraulics Academy courses
technology
48 Industrial hydraulics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Industrial hydraulics 49
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software developers Decision-makers Teachers
Face-to-face engineers
training Assembly Maintenance personnel IT specialists Executives Trainers
Project engineers
personnel Commissioning engineers Commissioning Plant managers
Developers/design engineers
Mechanical engineers engineers Proprietors
eLearning Technical sales
Electricians Buyers
hydraulics
hydraulics
Industrial
Industrial
BASIC TRAINING
54 HTG Basic knowledge of hydraulics ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
NEW 29 eHTVT Basic knowledge of valve technology ● ● ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
60 HTP-1 Industrial hydraulics – On/off valves ● ● ●
Electric drives
64 HTP-5 Developing and optimizing hydraulic control systems ● ● ●
and controls
and controls
65 HTP-MA Measurement and analysis ● ●
Tightening
systems
systems
NEW 68 HTPPu Hydraulic pumps – Adjustment units and control equipment ● ●
72 HTP-EV 2-Way cartridge valve technology – Logic elements with practical exercises ● ●
technology
technology
Welding
Welding
PROJECT PLANNING
NEW 74 HTG-PRO Basics of project planning – Hydraulic switch valves ● ●
Linear motion
and assembly
and assembly
technology
technology
SPECIAL TOPICS, CONNECTED HYDRAULICS AND SYTRONIX
80 HT-FCM Filtration and oil treatment in hydraulic systems ● ● ●
Pneumatics
83 HT-Sp Accumulators in hydraulic systems ● ● ●
84 HT-BPSp Imparting expert knowledge of hydraulic accumulators to persons qualified for examination ● ●
85 HT-BPSch Imparting expert knowledge of hydraulic hoses to persons qualified for examination ● ●
Safety technology
Safety technology
86 HT-DTFT Sealing technology for fluid technology ●
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
50 Industrial hydraulics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Industrial hydraulics 51
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software developers Decision-makers Teachers
Face-to-face engineers
training Assembly Maintenance personnel IT specialists Executives Trainers
Project engineers
personnel Commissioning engineers Commissioning Plant managers
Developers/design engineers
Mechanical engineers engineers Proprietors
eLearning Technical sales
Electricians Buyers
hydraulics
hydraulics
Industrial
Industrial
SPECIAL TOPICS, CONNECTED HYDRAULICS AND SYTRONIX
90 HTP-IAC-HMC1 VT-HMC Hydraulic axis controller/IAC multi-ethernet valve ● ● ● ●
92 HTP-HMC2 Motion control for hydraulics – Programming the VT-HMC motion controller ● ● ● ●
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
93 HTP-PRO Project planning and programming for VT-HMC and IndraMotion MLC ● ● ●
Automation and
Industry 4.0
Industry 4.0
NEW 97 EH-SYT_FcP_IN@ Sytronix FcP/DRN 5020 – Parameterization and commissioning ● ● ●
Electric drives
Electric drives
and controls
and controls
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
52 Industrial hydraulics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Industrial hydraulics 53
New training
courses
courses
Practice with error analysis
eDrive & Control
Academy
BASIC TRAINING PRACTICE WITH ERROR ANALYSIS
4 5 5 5 5
HTG1) HTP-1 HTP-2 HTP-4 HTP-5
Basic knowledge of Industrial hydraulics - Continuous control Control technology Developing and
hydraulics On/off valves valve technology in complex control optimizing hydraulic
hydraulics
hydraulics
Industrial
Industrial
systems control systems
p. 54 p. 60 p. 62 p. 63 p. 64
NEU 4 NEU 3 5
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
eHTB1) EHG HTPPu HTP-MA
Basic knowledge Electrical engineering Hydraulic pumps – Measurement and
of hydraulics for hydraulic engineers Adjustment units and analysis
(eLearning) control equipment
p. 28 p. 56 p. 68 p. 65
NEU 3 4
Automation and
Automation and
eHTVT1) HED-G HNC
Industry 4.0
Industry 4.0
Basic knowledge of Hydraulics – HNC 100-3x Numerical
valve technology Electrification and control system –
(eLearning) digitization – Basics Introduction, handling,
optimization
p. 29 p. 58 p. 66
Electric drives
Electric drives
2 2 4
and controls
and controls
HTP-HAs HTP-PC HTRP
Hägglunds drive Modern electronics Practical hydraulics
systems systems for axial piston control technology
pumps
p. 71 p. 70 p. 67
Tightening
Tightening
4
systems
systems
HTP-EV
2-Way cartridge valve
technology – Logic
elements with practical
exercises
p. 72
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
1) When you book the HTG training course you will
receive a 12-month single license for the eHTB
Energy efficiency
Energy efficiency
and eHTVT eLearning courses free of charge!
HTG
Basic knowledge of hydraulics
New training
New training
courses
courses
eDrive & Control
Academy
hydraulics are used are diverse. This is why it is all the more important to be
familiar with the basics of hydraulics. Basic knowledge is required to safely
handle the machine. This training course is recommended for anybody who
hydraulics
hydraulics
Industrial
Industrial
wants to familiarize themselves with the technology of hydraulics.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
PTG FACE-TO-FACE TRAINING LOCATION
ff Requirements on fluid technology
The most common way to transfer knowledge
ff Basic properties of hydraulics September 14 - September 17, 2020 Würzburg
is still face-to-face training. The personal
ff Structure and function of hydraulic systems and
contact and direct communication reinforce
typical components of industrial hydraulics Please contact us for more dates and individual
theoretical knowledge.
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Basic physical principles and their laws in training courses. We would be happy to help you.
fluid technology
ff DIN ISO 1219 symbols TRAINING TIME
DATES (GERMAN) TRAINING
ff Fluids
LOCATION 4 days:
ff Hydraulic pumps, hydraulic motors and cylinders
Electric drives
Electric drives
and controls
and controls
Day 1 10:00 AM – 4:15 PM
ff Control technology (shut-off, directional, pressure January 13 - January 16, 2020 Würzburg
Days 2 and 3 8:00 AM – 4:15 PM
and flow control valves) January 28 - January 31, 2020 Bochum
Day 4 8:00 AM – 12:30 PM
ff Reading, understanding and optimizing February 10 - February 13, 2020 Unterwellenborn
circuit diagrams February 24 - February 27, 2020 Würzburg
PRICE
Tightening
Tightening
ff Practical exercises March 17 - March 20, 2020 Gütersloh
systems
systems
March 31 - April 3, 2020 Leverkusen €1,467.00 (net) / €1,745.73 (gross)
LEARNING TARGET April 6 - April 9, 2020 Würzburg
April 27 - April 30, 2020 Würzburg ADVANCED TRAINING COURSES
ff Understanding the basic structure of
May 12 - May 15, 2020 Garching b.
technology
technology
hydraulic systems EHG, HTP-1, HTPPu, other training courses on the
Welding
Welding
München
ff Understanding the function and structure of Industrial Hydraulics learning path
June 2 - June 5, 2020 Bochum
select hydraulic components
June 15 - June 18, 2020 Würzburg
ff Being able to optimize hydraulic circuit diagrams NOTICE
June 23 - June 26, 2020 Hamburg
Linear motion
Linear motion
and assembly
and assembly
ff Knowing how to efficiently work with technical
technology
technology
June 29 - July 2, 2020 Würzburg We also offer this training at our subsidiaries in
documentation (data sheets, ISO 1219, etc.)
July 21 - July 24, 2020 Gütersloh Buttikon/Switzerland and Linz/Austria.
ff Being able to use hydraulic systems in planning
August 10 - August 13, 2020 Würzburg For information, please visit us online at:
and day-to-day work
August 18 - August 21, 2020 Bochum www.boschrexroth.ch and www.boschrexroth.at.
ff Knowing the criteria for planning and designing
August 31 - September 3, 2020 Würzburg
Pneumatics
Pneumatics
hydraulic systems
September 22 - September 25, 2020 Hamburg The contents of the eHTB and eHTVT eLearning
October 5 - October 8, 2020 Würzburg courses are identical with those of conventional
PREREQUISITE When you book the HTG training course you will
October 20 - October 23, 2020 Garching b. four-day HTG classroom training. For detailed
receive a 12-month single license free of charge
Safety technology
Safety technology
Technical understanding München information on the eLearning courses,
for the eHTB and eHTVT eLearning courses!
October 26 - October 29, 2020 Unterwellenborn see chapter eDrive & Control Academy.
TARGET GROUP November 17 - November 20, 2020 Bochum
November 30 - December 3, 2020 Leverkusen
Operators, service technicians, programmers, @
December 7 - December 10, 2020 Würzburg
NEU LW
Energy efficiency
Energy efficiency
@
planners/application engineers, managers and trainers
EHG
Notes
Electrical engineering for hydraulic engineers
New training
New training
courses
courses
eDrive & Control
Academy
electric control systems and continuous control valve technology.
This training course focuses on error analysis, both in electric and
hydraulic control systems.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Basics of electrical engineering, sensor technology
and continuous control valve technology February 17 - February 20, 2020 Unterwellenborn
ff Device technology (electrical and hydraulic April 20 - April 23, 2020 Leverkusen
components) September 21 - September 24, 2020 Würzburg
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Basic electro-hydraulic circuits October 19 - October 22, 2020 Leverkusen
ff Practical exercises with interference source November 2 - November 5, 2020 Unterwellenborn
analysis
DATE (ENGLISH) TRAINING
LEARNING TARGET LOCATION
Electric drives
Electric drives
and controls
and controls
ff Refreshing and deepening knowledge of electric July 20 - July 23, 2020 Würzburg
control systems and hydraulic components
ff Designing electro-hydraulically controlled motion Please contact us for more dates and individual
sequences training courses. We would be happy to help you.
Tightening
Tightening
systems
systems
ff Being able to simulate these processes on the
training system TRAINING TIME
ff Learning how to analyze errors in electric control
4 days:
systems and in the hydraulic part of the
Day 1 10:00 AM – 4:15 PM
technology
technology
control system
Welding
Welding
Days 2 and 3 8:00 AM – 4:15 PM
Day 4 8:00 AM – 3:30 PM
PREREQUISITE
Linear motion
and assembly
and assembly
technology
technology
HTG/eHTB and eHTVT training courses or
€1,777.00 (net) / €2,114.63 (gross)
comparable knowledge
Pneumatics
HED-G, HTP-1, HTP-2
Operators, service technicians, planners/application
engineers and trainers
NOTICE
Safety technology
www.boschrexroth.com/training
@
NEU LW
Energy efficiency
Energy efficiency
@
HED-G
Hydraulics –
New training
New training
courses
courses
Electrification and digitization – Basics
eDrive & Control
Academy
hydraulic components and electrical and digital systems and units has long
been standard practice in the industry. The result is a practically
inexhaustible "intelligent" toolkit for realizing application-specific, smart
hydraulics
hydraulics
Industrial
Industrial
hydraulic systems. Ultra-modern asynchronous motors, servo synchronous
motors and servo torque motors, flexible and compact frequency converters,
controller systems, bus systems, sensor technology, servo drives, interface
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
systems, software, and much more bring classical hydraulics into a new
league. Parameterization, communication, multi-functionality, visualization,
diagnostics, etc. are becoming the standard in hydraulic systems.
Automation and
Automation and
Industry 4.0
Industry 4.0
CONTENTS LEARNING TARGET DATES (GERMAN) TRAINING
LOCATION
ff Intelligent pressure supply aggregates ff Receive an overview of the components, modules
(Rexroth CytroPac) and systems for the electrification of the February 17 - February 19, 2020 Würzburg
Electric drives
Electric drives
and controls
and controls
-- Learning the structure, function, electrical hydraulics/hydraulic systems August 10 - August 12, 2020 Würzburg
connection, configuration, parameterization and ff Receive an overview of the software, bus systems November 9 - November 11, 2020 Würzburg
commissioning using practical exercises and interfaces for the digitalization of the
ff Hydraulic linear drive/axis controller hydraulics/hydraulic systems DATE (ENGLISH) TRAINING
LOCATION
Tightening
Tightening
(Rexroth IAC) with valve and sensor technology ff Deepen understanding of parameterization and
systems
systems
-- Position control with practical exercises dialog communication with practical examples September 28 - September 30, 2020 Würzburg
ff Basic knowledge of bus technology ff Overview of upcoming integration possibilities for
-- Field bus, Industrial Ethernet bus further electrification and digitization of Please contact us for more dates and individual
ff Basic knowledge of IO-Link valves and sensors, hydraulic systems training courses. We would be happy to help you.
technology
technology
Welding
Welding
practical exercises
PREREQUISITE TRAINING TIME
Linear motion
and assembly
and assembly
EHG training courses or comparable knowledge Day 1 10:00 AM – 4:30 PM
technology
technology
Day 2 8:00 AM – 4:30 PM
Bosch Rexroth is your global partner for powerful, proven hydraulic drive solutions for
every application, continually setting new benchmarks for performance, functionality
and lifetime. We help our customers to master force and torque.
TARGET GROUP Day 3 8:00 AM – 2:30 PM Our complete portfolio cost-effectively serves standard applications as well as complex
motion tasks with the most demanding requirements.
We exceed your expectations, applying our unique expertise to go beyond limits.
Our connected hydraulics solutions fit seamlessly into modern control architectures:
Operators, service technicians, planners/application PRICE
from small to large, from series to project business, all backed by worldwide service.
We move everything – mastering force and torque
Pneumatics
Pneumatics
engineers and trainers
€1,353.00 (net) / €1,610.07 (gross)
Safety technology
www.connected-hydraulics.com
HTPPu, HTP-PC, Sytronix training courses, You can find the current offer online at:
i4.0 training courses (see offer in this catalog) www.boschrexroth.com/training
REXR_ConHyd_AD_A4_A.indd 1 23.05.17 11:38
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-1
Industrial hydraulics – On/off valves
New training
New training
courses
courses
eDrive & Control
Academy
components in experiments. Even the effects of faulty installations can be
demonstrated here "without consequence".
hydraulics
hydraulics
Industrial
Industrial
CONTENTS PREREQUISITE DATE (ENGLISH) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Brief review of the basics Completion of the HTG/eHTB and eHTVT training
ff Analyzing system functions by reading courses or comparable knowledge September 21 - September 25, 2020 Würzburg
circuit diagrams
ff Operating behavior of control components TARGET GROUP Please contact us for more dates and individual
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Building and configuring practical basic circuits training courses. We would be happy to help you.
Operators, service technicians and
and analyzing any malfunctions
planners/application engineers
ff Information and methods for systematic TRAINING TIME
troubleshooting and error analysis
DATES (GERMAN) TRAINING 5 days:
ff Information on
Electric drives
Electric drives
and controls
and controls
LOCATION Day 1 10:00 AM – 4:15 PM
-- Sources of interference
Days 2 to 4 8:00 AM – 4:15 PM
-- Commissioning January 13 - January 17, 2020 Würzburg
Day 5 8:00 AM – 12:30 PM
-- Inspection and maintenance February 3 - February 7, 2020 Bochum
-- Servicing February 24 - February 28, 2020 Würzburg
PRICE
Tightening
Tightening
-- Assembly and piping March 9 - March 13, 2020 Hamburg
systems
systems
-- Occupational safety and accident prevention March 30 - April 3, 2020 Gütersloh €2,093.00 (net) / €2,490.67 (gross)
ff Introduction to our advanced practical training April 20 - April 24, 2020 Würzburg
courses May 11 - May 15, 2020 Würzburg ADVANCED TRAINING COURSES
May 25 - May 29, 2020 Bochum
technology
technology
HED-G, HTP-2, HTPPu
Welding
Welding
LEARNING TARGET June 15 - June 19, 2020 Würzburg
July 6 - July 10, 2020 Hamburg
ff Understanding hydraulic components and their NOTICE
August 3 - August 7, 2020 Leverkusen
operating behavior in practice
August 10 - August 14, 2020 Bochum You can find the current offer online at:
Linear motion
Linear motion
and assembly
and assembly
ff Being able to evaluate hydraulic functional
technology
technology
August 24 - August 28, 2020 Würzburg www.boschrexroth.com/training
sequences using targeted measurement and
September 14 - September 18, 2020 Gütersloh
analysis with a manometer
October 5 - October 9, 2020 Würzburg We also offer this training at our Buttikon subsidiary
ff Knowing about commissioning, maintenance,
October 12 - October 16, 2020 Hamburg in Switzerland. For information, please visit us online
error analysis, error avoidance and accident
Pneumatics
Pneumatics
October 26 - October 30, 2020 Würzburg at www.boschrexroth.ch
prevention
November 2 - November 6, 2020 Gütersloh
November 23 - November 27, 2020 Bochum
November 30 - December 4, 2020 Würzburg
Safety technology
Safety technology
December 7 - December 11, 2020 Leverkusen
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-2 HTP-4
Continuous control valve technology Control technology in complex control systems
New training
New training
courses
courses
eDrive & Control
Academy
technology. You will work out commissioning and methodical built and practical exercises performed with on/off and continuous
troubleshooting processes at test stands as part of a small group. control valves. Theoretical knowledge of hydraulics from the previous
training courses will be deepened.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING
LOCATION
ff Introduction to continuous control valve technology
CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Component technology (directional, pressure and January 20 - January 24, 2020 Würzburg
LOCATION
flow control valves) with handling, operating February 10 - February 14, 2020 Bochum ff Reading, understanding and working with
behavior and configuring March 2 - March 6, 2020 Würzburg circuit diagrams March 2 - March 6, 2020 Würzburg
ff Controls with proportional directional control March 23 - March 27, 2020 Würzburg ff Analog and digital control electronics May 25 - May 29, 2020 Würzburg
valves May 4 - May 8, 2020 Würzburg ff Practical test setups based on a press and August 24 - August 28, 2020 Würzburg
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Analog and digital control electronics in theory June 15 - June 19, 2020 Bochum a machine tool November 16 - November 20, 2020 Würzburg
and in practice July 6 - July 10, 2020 Würzburg ff Commissioning hydraulic control systems
ff Practical test setup according to circuit diagrams July 27 - July 31, 2020 Würzburg ff Documentation of operating data Please contact us for more dates and individual
worked out on the hydraulic training system August 17 - August 21, 2020 Würzburg ff Information on sources of interference, training courses. We would be happy to help you.
ff Information on sources of interference, September 7 - September 11, 2020 Würzburg troubleshooting, commissioning and maintenance
Electric drives
Electric drives
and controls
and controls
troubleshooting and commissioning September 21 - September 25, 2020 Bochum of hydraulic systems TRAINING TIME
ff Testing options October 12 - October 16, 2020 Würzburg ff Fault analysis on control systems
5 days:
ff Introduction to servo valve technology October 26 - October 30, 2020 Bochum
Day 1 10:00 AM – 4:15 PM
November 2 - November 6, 2020 Würzburg LEARNING TARGET
Days 2 to 4 8:00 AM – 4:15 PM
Tightening
Tightening
LEARNING TARGET November 16 - November 20, 2020 Würzburg
systems
systems
ff Being able to successfully commission systems Day 5 8:00 AM – 12:30 PM
November 30 - December 4, 2020 Bochum
ff Understanding and being able to apply the ff Knowing how to systematically analyze errors and
functionality and structure of continuous control rectify identified faults using documented settings PRICE
DATE (ENGLISH) TRAINING
valves as well as their electronic controllers ff Recognizing the causes of faults in the electrical
LOCATION €2,093.00 (net) / €2,490.67 (gross)
technology
technology
ff Recognizing simple functional sequences engineering/electronics field and in hydraulics
Welding
Welding
ff Being able to implement specified functional September 28 - October 2, 2020 Würzburg ff Creating the basis for attending the HTP-5
ADVANCED TRAINING COURSES
sequences training course later on
ff Creating the basis for the HTP-4 and/or HTP-MA TRAINING TIME HTP-5
Linear motion
Linear motion
and assembly
and assembly
training course later on PREREQUISITE
technology
technology
5 days:
NOTICE
Day 1 10:00 AM – 4:15 PM Completion of the HTP-1 and HTP-2 training courses
PREREQUISITE
Days 2 to 4 8:00 AM – 4:15 PM You can find the current offer online at:
Participation in the HTG/eHTB and eHTVT and HTP-1 Day 5 8:00 AM – 12:30 PM TARGET GROUP www.boschrexroth.com/training
Pneumatics
Pneumatics
training courses or comparable knowledge
Operators, service technicians and
PRICE
planners/application engineers
TARGET GROUP
€2,093.00 (net) / €2,490.67 (gross)
Operators, service technicians and
Safety technology
Safety technology
planners/application engineers ADVANCED TRAINING COURSES
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTP-5 HTP-MA
Developing and optimizing Measurement and analysis
New training
New training
courses
courses
hydraulic control systems
eDrive & Control
Academy
functional specifications and optimize them during commissioning. machines can hardly be measured without using appropriate measuring
One feature of this training course is the oil cleanliness analysis that you instruments. Under the instruction of the trainer, you will independently
will carry out independently. Also very interesting for experienced carry out appropriate exercises as part of a small group.
hydraulics
hydraulics
Industrial
Industrial
practitioners.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Developing, structuring and commissioning ff Basics of measuring technology
a complex circuit diagram ff Pressure measurement March 9 - March 13, 2020 Würzburg
ff Determining the optimization potential of ff Flow measurement May 11 - May 15, 2020 Würzburg
a hydraulic control system ff Measuring electrical quantities September 21 - September 25, 2020 Würzburg
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Closed control loops and using a controlled axis ff Structure and function of measuring instruments November 23 - November 27, 2020 Würzburg
ff Use of analog and digital control electronics ff Sensor selection criteria
ff Performing and evaluating a hydraulic fluid ff Calibrating sensors Please contact us for more dates and individual
analysis ff Analyzing measurement curves independently training courses. We would be happy to help you.
ff Documentation of operating data recorded on the training system
Electric drives
Electric drives
and controls
and controls
ff Analyzing and troubleshooting faults and errors TRAINING TIME
DATES (GERMAN) TRAINING LEARNING TARGET
5 days:
LEARNING TARGET LOCATION
ff Knowing how to routinely handle digital Day 1 10:00 AM – 4:15 PM
ff Knowing how to build and commission control March 16 - March 20, 2020 Würzburg measuring instruments Days 2. - 4. 8:00 AM – 4:15 PM
Tightening
Tightening
systems
systems
sequences using a bill of materials and July 13 - July 17, 2020 Würzburg (Hydrotechnik Multisystem 5060) Day 5 8:00 AM – 12:30 PM
a functional description November 30 - December 4, 2020 Würzburg ff Being able to analyze errors in a targeted fashion
ff Being able to optimize specified functional based on the analysis of measurement results PRICE
sequences used in the industry TRAINING TIME ff Being able to evaluate the suitability of measuring
€2,352.00 (net) / €2,798.88 (gross)
technology
technology
technology for dynamic processes in
Welding
Welding
5 days:
PREREQUISITE hydraulic systems
Day 1 10:00 AM – 4:15 PM ADVANCED TRAINING COURSES
ff Knowing how to document and optimize machine
Completion of the HTP-1, HTP-2 and HTP-4 Days 2 to 4 8:00 AM – 4:15 PM
processes using the latest measuring technology HT-WI, HED-G
training courses Day 5 8:00 AM – 12:30 PM
Linear motion
Linear motion
and assembly
and assembly
technology
technology
PREREQUISITE NOTICE
TARGET GROUP PRICE
Completion of the HTP-1 and HTP-2 training courses You can find the current offer online at:
Operators, service technicians and €2,093.00 (net) / €2,490.67 (gross)
or comparable knowledge www.boschrexroth.com/training
planners/application engineers
Pneumatics
Pneumatics
ADVANCED TRAINING COURSES
TARGET GROUP
HED-G
Operators and service technicians
Safety technology
Safety technology
NOTICE
Energy efficiency
@ @
HNC HTRP
HNC 100-3x Numerical control system – Practical hydraulics control technology
New training
New training
courses
courses
Introduction, handling, optimization
eDrive & Control
Academy
In order to ensure the perfect configuration of control loops for highly technology knowledge is essential. We recommend this training course if
sensitive systems, a "feeling" for dynamic processes and solid basic you have only dealt theoretically with the topic of control technology until
knowledge are indispensable. now or want to deepen your practical knowledge.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Introduction to the HNC 100-3x NC System ff Measurements on all components of Operators, service technicians and
suitable for hydraulics March 30 - April 2, 2020 Würzburg a hydraulic linear drive planners/application engineers
ff Description and configuration of hardware September 14 - September 17, 2020 Würzburg ff Tests and measurements on a controlled axis
as well as the WIN-PED 7 communication program ff Evaluating changes DATES (GERMAN) TRAINING
Automation and
Automation and
TRAINING TIME LOCATION
Industry 4.0
Industry 4.0
ff Measuring process variables and measured data ff Effect of disturbances on overall system
to set/optimize controller configuration ff Commissioning and optimizing a controlled
4 days: February 17 - February 20, 2020 Würzburg
ff Deepening acquired knowledge by commissioning cylinder on the hydraulic training system with the
Day 1 10:00 AM – 4:15 PM June 29 - July 2, 2020 Würzburg
and optimizing a hydraulic axis for position, HACD digital controller card
Days 2. - 3 8:00 AM – 4:15 PM August 31 - September 3, 2020 Würzburg
force and substitutional control ff Programming and optimization of a position- and
Electric drives
Electric drives
and controls
and controls
Day 4 8:00 AM – 12:30 PM November 9 - November 12, 2020 Würzburg
force-controlled sequence control at the
hydraulic system
PRICE TRAINING TIME
LEARNING TARGET ff Parameterization and optimization of
€1,984.00 (net) / €2,360.96 (gross) a substitutional closed-loop control (position and 4 days:
ff Setting control parameters (proportional range,
Tightening
Tightening
force control) Day 1 10:00 AM – 4:15 PM
systems
systems
reset and derivative time)
NOTICE Days 2 and 3 8:00 AM – 4:15 PM
ff Knowing about control loop structures and
LEARNING TARGET Day 4 8:00 AM – 12:30 PM
components You can find the current offer online at:
ff Knowing how to create programs and knowing www.boschrexroth.com/training ff Handling linear controllers capable of determining
PRICE
technology
technology
about handling and diagnostic options and configuring critical parameters
Welding
Welding
ff Being able to apply optimization, error localization ff Knowing how to measure results, malfunctions €1,777.00 (net) / €2,114.63 (gross)
and troubleshooting knowledge and faults with measuring technology and test
possible improvements ADVANCED TRAINING COURSES
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE ff Being able to successfully commission systems
technology
technology
HNC, HED-G
ff Knowing how to practically implement theoretical
Completion of the HTP-2 training course or
knowledge of control technology
comparable knowledge in continuous control valve NOTICE
technology, basic knowledge of electrical engineering
PREREQUISITE You can find the current offer online at:
Pneumatics
Pneumatics
www.boschrexroth.com/training
TARGET GROUP Completion of the HTP-2 training course or
comparable knowledge in continuous control valve
Operators and service technicians
technology, basic knowledge of electrical engineering
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTPPu
Hydraulic pumps –
New training
New training
courses
courses
Adjustment units and control equipment
eDrive & Control
Academy
a reliable and efficient hydraulic system. Competently handling the "heart"
of hydraulics is taught through exercises on the training system.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS LEARNING TARGET PREREQUISITE TRAINING TIME
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Overview of hydrostatic pump designs ff Knowing about different pump types and systems, Participation in the HTG/eHTB and eHTVT, HED-G and 3 days:
(displacer principles) as well as the criteria for using fixed displacement HTP-1 training courses or comparable knowledge Day 1 10:00 AM – 4:15 PM
ff Selection criteria (limit values) pumps, control pumps and variable-speed pumps Day 2 8:00 AM – 4:15 PM
ff Tasks, functions and details ff Properly manage and understand hydro pumps TARGET GROUP Day 3 8:00 AM – 3:00 PM
Automation and
Automation and
Industry 4.0
Industry 4.0
-- Constant pumps and variable pumps ff Being able to implement practical configuration,
Service technicians and planners/application
(possible settings) parameterization and adjustment methods PRICE
engineers
-- Actuating units and control equipment ff Recognizing and assessing damaging effects on
€1,508.00 (net) / €1,794.52 (gross)
-- Variable speed pump drives pumps (heating, overload, etc.)
DATES (GERMAN) TRAINING
ff How to install, commission and replace pumps ff Knowing the criteria for extending pump life cycle
Electric drives
Electric drives
and controls
and controls
LOCATION ADVANCED TRAINING COURSES
ff Troubleshooting (targeted procedure) and ff Knowing how to troubleshoot and repair
maintenance February 17 - February 19, 2020 Würzburg HTP-PC, HT-Sp, HTP-HMC2
ff Demonstrations of / exercises on May 25 - May 27, 2020 Würzburg
-- Pressure control June 22 - June 24, 2020 Würzburg NOTICE
Tightening
Tightening
-- Flow control July 13 - July 15, 2020 Würzburg
systems
systems
We also offer this training course at our Linz
-- Pressure/flow control August 24 - August 26, 2020 Würzburg
subsidiary in Austria. For information, please visit us
-- Variable speed pump drives October 12 - October 14, 2020 Würzburg
online at: www.boschrexroth.at
-- Practical exercises on setting the DFR November 9 - November 11, 2020 Würzburg
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-PC HTP-HAs
Modern electronics systems for Hägglunds drive systems
New training
New training
courses
courses
axial piston pumps
eDrive & Control
Academy
axial piston pumps A4..VS..HS5 (VT-HPC), A4..VS..HS5E, SY(H)DFED and system availability. Important basics are learned through practical exercises
SY(H)DFEF are presented. You will become familiar with the hardware and on the training system.
software properties of the products, as well as the optimization options for
hydraulics
hydraulics
Industrial
Industrial
the pump controllers. One of the practical tasks is commissioning an axial
piston pump. The course also focuses on communication with the higher
control system. Participants are required to bring their own laptops to be CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
able to work with the software tool and forms. ff Introduction of the product range Operators and service technicians
ff Hydraulics in general, hydraulic properties
ff Structure and function of hydraulic systems DATES (GERMAN) TRAINING
CONTENTS DATES (GERMAN) TRAINING ff Basic physical principles and their importance to LOCATION
Automation and
Automation and
Industry 4.0
Industry 4.0
LOCATION hydraulics
ff Hardware and software properties of May 12 - May 13, 2020 Bochum
ff Information on installing motors
pump controllers April 2 - April 3, 2020 Lohr am Main May 14 - May 15, 2020 Bochum
ff Information on commissioning power units
ff Parameterization and commissioning with May 28 - May 29, 2020 Lohr am Main November 10 - November 11, 2020 Bochum
ff Information on basic settings and test sequences
IndraWorks Ds software October 15 - October 16, 2020 Lohr am Main for pump power units
Electric drives
Electric drives
and controls
and controls
ff Performing initial commissioning November 19 - November 20, 2020 Lohr am Main DATE (ENGLISH) TRAINING
ff Demonstration on disassembled pumps
ff Analyzing control behavior and control quality LOCATION
ff Disassembly of a Marathon motor
ff Data diagnostics and analysis DATE (ENGLISH) TRAINING ff Disassembly of a Viking/Compact motor November 12 - November 13, 2020 Bochum
ff Structure of communication with a higher control LOCATION ff Basic information on commissioning
system via PROFINET.RT
Tightening
Tightening
May 6 - May 7, 2020 Lohr am Main hydraulic systems Please contact us for more dates and individual
systems
systems
ff Hydraulic fluids training courses. We would be happy to help you.
LEARNING TARGET
TRAINING TIME ff Electrical equipment
ff Knowing the structure and use of the ff Motor test rig and power unit demonstration TRAINING TIME
2 days:
pump controller for the axial piston units
technology
technology
2 days:
Welding
Welding
Day 1 10:00 AM – 4:30 PM LEARNING TARGET
ff Understanding the procedure for commissioning
Day 2 8:00 AM – 2:00 PM Day 1 8:00 AM – 4:15 PM
the products
ff Knowing how to increase system availability Day 2 8:00 AM – 4:15 PM
ff Being able to optimize the pump controller
PRICE ff Knowing how to decrease machine downtime
ff Being able to set up communication with a
Linear motion
Linear motion
and assembly
and assembly
ff Knowing how to improve production results PRICE
technology
technology
higher control system €690.00 (net) / €821.10 (gross) ff Correcting malfunctions
ff Being able to analyze data €1,086.00 (net) / €1,292.34 (gross)
ff Being able to identify issues
ADVANCED TRAINING COURSES
PREREQUISITE ADVANCED TRAINING COURSES
HT-Sp, HTP-2, HTP-HMC2 PREREQUISITE
Pneumatics
Pneumatics
Participation in the HTG/eHTB and eHTVT, HED-G, HT-WI
Technical understanding
HTPPu and HTP-1 training courses or comparable
NOTICE
knowledge NOTICE
Participants are required to bring their own laptops
Safety technology
Safety technology
TARGET GROUP to be able to work with the software tool and forms. You can find the current offer online at:
www.boschrexroth.com/training
Operators, service technicians, planners/application
engineers, managers and trainers
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTP-EV
Learning path
2-Way cartridge valve technology –
New training
New training
courses
courses
Project planning
Logic elements with practical exercises
eDrive & Control
Academy
BASIC TRAINING PROJECT PLANNING
applications. Their versatile applications and designs may, however,
also lead to major problems in practice if you are not familiar with their HTG1)
4
features. This training introduces you to the different logic element designs
Basic knowledge
of hydraulics
hydraulics
hydraulics
Industrial
Industrial
NEU 3 NEU 3
and provides you with the appropriate knowledge.
4
HTG-PRO HTSY-PRO HTRP
p. 54 Basics of project Planning and Practical hydraulics
planning – Hydraulic configuring hydraulic control technology
switch valves systems
NEU
CONTENTS eHTB1)
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
p. 74 p. 75 p. 67
Basic knowledge of
hydraulics (eLearning)
ff Structure and function of 2-way cartridge valves
(directional design, pressure limitation and
p. 28
reduction function, LC2A active logics)
ff Overview of insert and cover types NEU
Automation and
Automation and
eHTVT1)
Industry 4.0
Industry 4.0
ff Basic circuit with logic elements in theory and in Basic knowledge
of valve technology
practical exercises (eLearning)
Electric drives
and controls
and controls
LEARNING TARGET
Tightening
March 9 - March 12, 2020 Würzburg
systems
systems
ff Being able to select logic inserts and logic covers
June 22 - June 25, 2020 Würzburg
ff Knowing how to read circuit diagrams with 2-way
November 23 - November 26, 2020 Würzburg
cartridge valves
technology
PREREQUISITE
Welding
Welding
LOCATION
Participation in the HTG/eHTB and eHTVT
October 5 - October 8, 2020 Würzburg
training courses or comparable knowledge
Linear motion
Linear motion
and assembly
and assembly
Please contact us for more dates and individual
technology
technology
TARGET GROUP
training courses. We would be happy to help you.
Service technicians and planners/application
engineers TRAINING TIME
Pneumatics
Pneumatics
4 days:
Day 1 10:00 AM – 4:15 PM
Days 2 and 3 8:00 AM – 4:15 PM
Day 4 8:00 AM – 3:30 PM
Safety technology
Safety technology
PRICE
Energy efficiency
@
and eHTVT eLearning courses free of charge!
HTG-PRO HTSY-PRO
Basics of project planning – Planning and configuring hydraulic systems
New training
New training
courses
courses
Hydraulic switch valves
eDrive & Control
Academy
and circuit diagram design, you as a project engineer or technical sales project planning steps in industrial hydraulics. This training also offers
employee will take your first steps into the world of project planning. a good forum for answering questions from your everyday practice.
Insights into the basics of functional safety round out this training.
hydraulics
hydraulics
Industrial
Industrial
The product selection and tools used are implemented in real
Bosch Rexroth industrial examples.
CONTENTS PREREQUISITE
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Features of hydraulic principles Participation in the HTG/eHTB and eHTVT training
CONTENTS TARGET GROUP
ff Selection criteria of on/off valves such as courses or comparable knowledge
ff Knowing basic steps in project planning including Planners/application engineers and service technicians characteristics and characteristic curves
the basic rules of hydraulic circuit technology ff Selecting pumps for the open circuit in TARGET GROUP
Automation and
Automation and
DATES (GERMAN) TRAINING
Industry 4.0
Industry 4.0
ff Project planning work steps using a concrete hydraulic systems
Planners/application engineers and service technicians
example LOCATION ff Tools for project planning
ff Basic selection criteria for pumps, switch valves ff Cooling filter circuit design
April 27 - April 29, 2020 Würzburg DATES (GERMAN) TRAINING
and cylinders ff Example of the dimensioning of
September 28 - September 30, 2020 Würzburg LOCATION
a hydraulic accumulator
Electric drives
Electric drives
and controls
and controls
LEARNING TARGET ff Project planning with standard assemblies March 25 - March 27, 2020 Würzburg
Please contact us for more dates and individual
ff Project planning work steps using examples June 8 - June 10, 2020 Bochum
ff Gaining an overview of safely selecting and sizing training courses. We would be happy to help you.
ff Answering everyday questions from participants July 15 - July 17, 2020 Würzburg
hydraulic components
October 26 - October 28, 2020 Hamburg
ff Finding and using documentation and electronic TRAINING TIME
Tightening
Tightening
LEARNING TARGET
systems
systems
media
3 days: Please contact us for more dates and individual
ff Understanding technical documents and ff Knowing important steps in project planning with
Day 1 10:00 AM – 4:15 PM training courses. We would be happy to help you.
guidelines industrial hydraulics components considering the
Day 2 8:00 AM – 4:15 PM
ff Increasing awareness of functional safety basic rules of hydraulic circuit technology
Day 3 8:00 AM – 3:00 PM TRAINING TIME
technology
technology
ff Gaining an overview of the basic principles of ff Being able to select and design components of
Welding
Welding
hydraulics hydraulic systems (pump, valves, tanks, 3 days:
PRICE
ff Controlling position, velocity and pressure accumulators, heat exchangers, filters, drive Day 1 10:00 AM – 4:15 PM
ff Outlook on continuous control valve technology €1,353.00 (net) / €1,610.07 (gross) motor, etc.) Day 2 8:00 AM – 4:15 PM
Linear motion
Linear motion
and assembly
and assembly
ff Recognizing the efficiency of the Day 3 8:00 AM – 3:00 PM
technology
technology
PREREQUISITE ADVANCED TRAINING COURSES components/system
ff Knowing how to configure hydraulic systems PRICE
Completion of the HTG/eHTB and eHTVT training HED-G, HTSY-PRO and other relevant training
ff Gaining an overview of the basic principles of
courses or comparable knowledge courses on the Industrial Hydraulics learning path €1,353.00 (net) / €1,610.07 (gross)
hydraulics
Pneumatics
Pneumatics
ff Spring mass
NOTICE NOTICE
ff Continuous control valve technology
We also offer this training course at our Linz ff Dynamic behavior You can find the current offer online at:
subsidiary in Austria. www.boschrexroth.com/training
Safety technology
Safety technology
For information, please visit us online at:
www.boschrexroth.at
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
Notes
New training
courses
eDrive & Control
Academy
hydraulics
Industrial
Mobile electronics
Mobile hydraulics
Automation and
Industry 4.0
Electric drives
and controls
Tightening
systems
technology
Welding
Für kraftvolle und hocheffiziente Hydraulik ist Bosch Rexroth weltweit Ihr Partner.
Wir setzen für Sie die Maßstäbe in Leistung, Funktion und Lebensdauer.
Egal für welche Anwendung, mit uns haben Sie Kraft und Drehmoment immer im Griff.
Wir haben immer die passende Lösung für Sie – von der effizienten Lösung für
Linear motion
and assembly
technology
We always
Wirwelche
Egal für have
bewegen the –
alles right
Anwendung,mitsolution
Kraft forhaben
und
mit uns you – from
Sie an
Drehmoment efficient
Kraft projects. Including
und Drehmoment immer imworldwide
Griff. services.
solution for standard applications to demanding movement We move everything – with power and torque
Wir haben immer die passende Lösung für Sie – von der effizienten Lösung für
Standardanwendungen bis hin zu anspruchsvollen Bewegungsaufgaben.
Safety technology
Mit unserem einzigartigen Know-how verschieben wir immer wieder die Grenzen.
Unsere rundum vernetzten Hydraulik-Lösungen fügen sich nahtlos in moderne
Steuerungsarchitekturen ein. Von klein bis groß, von der Serie bis ins Projektgeschäft.
Inklusiver weltweiter Serviceleistungen.
Energy efficiency
New training
courses
courses
Special topics, connected hydraulics Special topics, connected hydraulics
and Sytronix and Sytronix
eDrive & Control
Academy
BASIC TRAINING SPECIAL TOPICS SYTRONIX
hydraulics
Industrial
Industrial
hydraulic systems hydraulic circuit systems training 4 3 2
diagrams HTG1) EAT-ID-I HTP-PC
p. 54 p. 80 p. 81 p. 82 p. 88 Basic knowledge of IndraDrive – Modern electronics
hydraulics Diagnostics and systems for
maintenance axial piston pumps
NEU 3 2 2 3
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
eHTB1) HTPPu HTP-PC HT-Sp HT-BPSp p. 54 p. 203 p. 70
Basic knowledge of Hydraulic pumps Modern electronics Accumulators in Imparting expert
hydraulics (eLearning) adjustment units and systems for hydraulic systems knowledge of hydraulic
control equipment axial piston pumps accumulators to persons
NEU NEU 2
qualified for examination eHTB1) EH-SYT_SvP_I@
Basic knowledge Sytronix SvP – Basics,
p. 28 p. 68 p. 70 p. 83 p. 84 of hydraulics parameterization and
(eLearning) commissioning
NEU 3 NEU 1 2
Automation and
Automation and
eHTVT1) HT-DTFT HT-BPSch p. 28 p. 96
Industry 4.0
Industry 4.0
HT-FLUIDS-IH HT-BPSch
Basic knowledge Sealing technology Imparting expert
Hydraulic fluids in Imparting
for fluid technology knowledge of hydraulic
of valve technology industrial applications NEU
Expert
hoses Knowledge
to persons of
qualified NEU 2
(eLearning)
Hydraulic Hoses to
for examination eHTVT1)
EH-SYT_FcP_IN@
Qualified Persons Basic knowledge of
p. 86 p. 87 p. 85 Sytronix FcP/DRN 5020
p. 29 valve technology
– Parameterization and
(eLearning)
commissioning
Electric drives
Electric drives
and controls
and controls
p. 29 p. 97
CONNECTED HYDRAULICS
BASIC TRAINING SPECIFIC BASICS INTERMEDIATE TRAINING e4EE
Basic knowledge of
energy efficiency
NEU 4 3 3 2 (eLearning)
eHTB1) HTG1) HED-G HTP-HMC2
Tightening
Tightening
systems
systems
Basic knowledge of Basic knowledge of Hydraulics – HTP-IAC-HMC1 Motion control for
p. 38
hydraulics (eLearning) hydraulics Electrification and VT-HMC Hydraulic hydraulics programming
digitization axis controller/IAC the VT-HMC motion
basics multi-ethernet valve controller 3
e4EE Sytronix HTPPu
p. 28 p. 54 p. 58 p. 90 p. 92
Energy efficiency Hydraulics training
of variable-speed pumps
NEU 5 5 pump drives
technology
technology
eHTVT1) HTP-PRO HTP-MLC (eLearning)
Welding
Welding
Basic knowledge Project planning IndraMotion MLC for p. 39 p. 68
of valve technology and programming hydraulic drives
(eLearning) for VT-HMC and
IndraMotion MLC NEU 2
p. 29 p. 93 p. 94 HTP-CytroPac
Commissioning
Linear motion
Linear motion
and assembly
and assembly
CytroPac
technology
technology
3 2
DCA_eT_Controller HTPPu HTP-PC
Hydraulic control Hydraulic pumps Modern electronics p. 95
technology for motion adjustment units and systems for axial piston
control control equipment pumps
(eTraining/webinar)
p. 44 p. 68 p. 70
Pneumatics
Pneumatics
eESTG2)
Basic knowledge
of electric control
technology
Safety technology
Safety technology
p. 34
1) W
hen you book the HTG training course you will
receive a 12-month single license for the eHTB
and eHTVT eLearning courses free of charge!
eEATG
Basic knowledge of
electric drive 2) When you book the ESTG-SPS-2G training course 1) When you book the HTG training course you will
technology you will receive a 12-month single license for the receive a 12-month single license for the eHTB
Energy efficiency
Energy efficiency
eESTG eLearning course free of charge! and eHTVT eLearning courses free of charge!
p. 35
HT-FCM HT-SL
Filtration and oil treatment in hydraulic systems Reading and understanding
New training
New training
courses
courses
hydraulic circuit diagrams
eDrive & Control
Academy
by the filtration concept used. basics of fluid technology, you will learn what information is contained in
a hydraulic circuit diagram. The symbols and basic circuits will be explained
and participants will learn about the relationship between hydraulic circuit
hydraulics
hydraulics
Industrial
Industrial
diagrams, electrical circuit diagrams, and data sheets. Practical examples
CONTENTS will round off this training course.
Mobile electronics
Mobile electronics
CONTENTS TARGET GROUP
Mobile hydraulics
Mobile hydraulics
ff Contamination and its consequences in
hydraulic systems
ff Structure and function of hydraulic systems and Operators, service technicians, planners/application
ff Cleanliness levels of hydraulic fluids
typical components engineers and trainers
ff Filter materials and their properties
ff Basic circuits
ff Components, designs and selection of
ff Reading, understanding and preparing DATES (GERMAN) TRAINING
Automation and
Automation and
Industry 4.0
Industry 4.0
hydraulic filters
hydraulic circuit diagrams LOCATION
ff Hydraulic fluids and their effect on filtration
ff Discussion of extensive, real-life
ff Checking oil condition as an essential part of February 3 - February 5, 2020 Würzburg
hydraulic diagrams
Condition Monitoring March 31 - April 2, 2020 Bochum
ff Basics and process of treating oil with emphasis July 20 - July 22, 2020 Würzburg
Electric drives
Electric drives
and controls
and controls
LEARNING TARGET
on dehydration and degasification September 9 - September 11, 2020 Issum
ff Practical tips and information on maintenance ff Recognizing basic properties using symbols November 18 - November 20, 2020 Würzburg
TARGET GROUP
and service ff Knowing how to read basic system functions from December 8 - December 10, 2020 Bochum
ff Trends in hydraulic filtration Service technicians, planners/application engineers a hydraulic circuit diagram and recognizing
Tightening
Tightening
and trainers information TRAINING TIME
systems
systems
LEARNING TARGET ff Knowing how to use hydraulic circuit diagrams
3 days:
DATES (GERMAN) TRAINING LOCATION during commissioning, maintenance and in the
ff Gaining basic knowledge of hydraulic filtration Day 1 10:00 AM – 4:15 PM
event of an error
and measuring technology May 5, 2020 Ketsch/Rhein Day 2 8:00 AM – 4:15 PM
ff Knowing how to effectively work with technical
technology
technology
ff Being able to design filters October 6, 2020 Ketsch/Rhein Day 3 8:00 AM – 3:00 PM
Welding
Welding
documentation (data sheets, ISO 1219, etc.)
Linear motion
and assembly
and assembly
Completion of the HTG/eHTB and eHTVT training
technology
technology
training courses or comparable knowledge
TRAINING TIME courses or comparable knowledge
ADVANCED TRAINING COURSES
Day 1 8:00 AM – 4:30 PM
HTP-1, HT-WI, HT-Sp
Pneumatics
Pneumatics
PRICE
NOTICE
€523.00 (net) / €622.37 (gross)
We also offer this training at our Buttikon subsidiary
in Switzerland. For information, please visit us
ADVANCED TRAINING COURSES
Safety technology
Safety technology
online at: www.boschrexroth.ch
HT-FLUIDS-IH
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HT-WI HT-Sp
Maintaining and servicing Accumulators in hydraulic systems
New training
New training
courses
courses
hydraulic systems
eDrive & Control
Academy
However, insufficient and improper maintenance and servicing of hydraulic improvement are important components of hydraulic systems. Due to their
systems lead to unpredictable costs. Production failure, safety risks, high energy storage potential, these components are subject to strict
downtime and the voiding of warranty claims may be the consequences. safety regulations.
hydraulics
hydraulics
Industrial
Industrial
Higher environmental strain and safety problems have to be expected. Using
check lists, systematic procedures and practical exercises in this training CONTENTS
course helps find out where the technical or organizational operation of the
Mobile electronics
Mobile electronics
ff How hydraulic accumulators work and where they
Mobile hydraulics
Mobile hydraulics
system can be improved to increase productivity. are used
ff Designs, size selection and safety aspects of the
hydraulic accumulator
CONTENTS PREREQUISITE ff Practical tips and maintenance information
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Preventive maintenance and service Completion of the HTG/eHTB and eHTVT training
LEARNING TARGET
ff Scheduled maintenance and defining maintenance courses or comparable knowledge
intervals (daily, weekly, monthly, annually) ff Being familiar with the use of hydraulic
ff Documenting maintenance and service TARGET GROUP accumulators as important components of hydraulic
Electric drives
Electric drives
systems and components for system improvement
and controls
and controls
ff Targeted implementation of maintenance TRAINING TIME
Operators, service technicians ff Understanding safety regulations for using
(inspection and maintenance schedules,
hydraulic accumulators 2 days:
risk assessment, weak point analysis)
DATES (GERMAN) TRAINING ff Understanding design structure and functioning Day 1 9:00 AM – 4:15 PM
ff Correctly using tools, measuring equipment and
LOCATION ff Being able to calculate accumulator capacity Day 2 8:00 AM – 1:00 PM
accessories
Tightening
Tightening
systems
systems
ff Qualification/Suitability of personnel March 16 - March 18, 2020 Bochum
PREREQUISITE PRICE
ff Practical examples June 8 - June 10, 2020 Würzburg
October 12 - October 14, 2020 Bochum Completion of the HTG/eHTB and eHTVT training €879.00 (net) / €1,046.01 (gross)
LEARNING TARGET December 7 - December 9, 2020 Würzburg courses or comparable knowledge
technology
technology
ADVANCED TRAINING COURSES
Welding
Welding
ff Learning about maintaining and servicing systems
TRAINING TIME TARGET GROUP
ff Creating system-specific service checklists HT-BPSp, HT-BPSch, HT-WI
ff Assessment of hydraulic components by means of 3 days: Service technicians, programmers and
suitable measuring devices Day 1 10:00 AM – 4:15 PM planners/application engineers
NOTICE
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Safe identification of assemblies and components Day 2 8:00 AM – 4:15 PM
DATES (GERMAN) TRAINING ff We recommend first attending the "Hydraulics
ff Systematic approach using a service checklist Day 3 8:00 AM – 12:30 PM
LOCATION Training – Pumps" (HTPPu) training course
ff Maintain and rebuilding the wear reserve of
ff An alternative to this training: HT-BPSp – Imparting
a hydraulic system PRICE February 20 - February 21, 2020 Würzburg
expert knowledge of hydraulic accumulators to
ff Complying with standardized principles
Pneumatics
Pneumatics
July 16 - July 17, 2020 Würzburg
€1,663.00 (net) / €1,978.97 (gross) persons qualified for examination (see next page)
ff Practical approach to working August 27 - August 28, 2020 Würzburg
November 12 - November 13, 2020 Würzburg
NOTICE
Safety technology
Safety technology
You can find the current offer online at: Please contact us for more dates and individual
www.boschrexroth.com/training training courses. We would be happy to help you.
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HT-BPSp HT-BPSch
Imparting expert knowledge of hydraulic Imparting expert knowledge of hydraulic hoses to
New training
New training
courses
courses
accumulators to persons qualified for examination persons qualified for examination
eDrive & Control
Academy
obliges the employer to commission so-called "persons qualified for wear and stress due to pressure impulses. Therefore, the legislator makes
examination" with the examination of work equipment and systems that special demands on the operator. The person qualified for examination has
require monitoring. They need to have relevant vocational training, work the expert knowledge for carrying out the required tests. Relevant
hydraulics
hydraulics
Industrial
Industrial
experience, as well as be recently active in this profession. It is also required vocational training, work experience, as well as being recently active in this
that by means of participation in training courses and schooling with regard to profession are required.
the work equipment, their expertise is up-to-date. It is also required that by means of participation in training courses and
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS PREREQUISITE
schooling with regard to the work equipment, their expertise is up-to-date.
Mandatory training course according to BetrSichV [Ordinance on Industrial
ff Functioning and application areas of ff Completion of the HTG/eHTB and eHTVT
hydraulic accumulators training courses or comparable knowledge
Safety and Health].
Automation and
Automation and
ff Design structure and functioning ff Prior completion of the eHT-BPSp eLearning
CONTENTS
Industry 4.0
Industry 4.0
DATES (GERMAN) TRAINING
ff Calculating accumulator capacity course
LOCATION
ff Damage symptoms and repair ff Refresh the technical and physical basics of
ff Delivery condition, transport, storage and TARGET GROUP hydraulics March 24 - March 25, 2020 Würzburg
installation ff Converting power and pressure to November 12 - November 13, 2020 Würzburg
Electric drives
Electric drives
Service technicians, trainers
and controls
and controls
ff Commissioning, maintenance, disposal hydraulic control
ff Accumulator charging circuits ff Safety rules for HY hose lines according to Please contact us for more dates and individual
DATES (GERMAN) TRAINING
ff Safety equipment DGUV Directive 113-020 training courses. We would be happy to help you.
LOCATION
ff Tests, test intervals, test procedures ff Safety rules for HY fluids according to
ff Legal principles and standards March 16 - March 18, 2020 Würzburg DGUV Directive 113-020 TRAINING TIME
Tightening
Tightening
systems
systems
ff Knowledge test on expert knowledge of hydraulic June 17 - June 19, 2020 Issum ff Operational Safety Ordinance (BetrSichV)
2 days:
accumulators to persons qualified for examination October 26 - October 28, 2020 Würzburg ff Final exam
Day 1 10:00 AM – 4:30 PM
Day 2 8:00 AM – 4:30 PM
LEARNING TARGET Please contact us for more dates and individual LEARNING TARGET
technology
technology
Welding
Welding
training courses. We would be happy to help you.
ff Being familiar with hydraulic accumulators as ff Construction and application-specific basics of PRICE
important elements of hydraulic systems and HY hose lines
TRAINING TIME €879.00 (net) / €1,046.01 (gross)
components for system improvement ff Become familiar with the requirements in terms
ff Understanding design structure and functioning 3 days: of the laws, regulations and rules
Linear motion
Linear motion
and assembly
and assembly
ADVANCED TRAINING COURSES
technology
technology
ff Understanding the dangers of pressure and Day 1 9:00 AM – 4:30 PM
protection concepts Day 2 8:00 AM – 4:30 PM PREREQUISITE HT-BPSp, HT-WI
ff Being familiar with the applicable standards Day 3 8:00 AM – 3:00 PM Refresher course recommended every two years
Experience in dealing with hydraulics
ff Being familiar with the relevant content of the
Pneumatics
Pneumatics
Ordinance on Industrial Safety and Health and its PRICE NOTICE
TARGET GROUP
rules and regulations
€1,353.00 (net) / €1,610.07 (gross) You can find the current offer online at:
ff Gaining an overview of the Product Safety Act, Operators, service technicians
www.boschrexroth.com/training
Pressure Equipment Directive, and Occupational
ADVANCED TRAINING COURSES
Safety technology
Safety technology
Safety Act
HT-BPSch, HT-WI
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HT-DTFT HT-FLUIDS-IH
Sealing technology for fluid technology Hydraulic fluids in industrial applications
New training
New training
courses
courses
eDrive & Control
Academy
of oil contaminates 600 to 1,000 liters of drinking water! One wrong or you basic information on the specific properties of base oils, additives,
incorrectly installed seal can cause the entire machine to fail, possibly formulated hydraulic fluids and their standardization. Furthermore, you will
resulting in significant costs. To be able to safely and reliably operate the be taught the application notes and requirements for Rexroth hydraulic
hydraulics
hydraulics
Industrial
Industrial
seal inside the machine, important rules must be followed when components.
installing and selecting the seal. This basic knowledge is necessary to
ensure the safe operation of the machine without failure costs, since the
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
reliability of the seal is affected by many factors. CONTENTS TARGET GROUP
Automation and
ff Understanding sealing systems and their Planners/application engineers DATES (GERMAN) TRAINING
Industry 4.0
Industry 4.0
ff Additives and their effect
functioning
ff Oil properties LOCATION
ff Materials and their physical, thermal and chemical DATES (GERMAN) TRAINING ff Standardization
properties LOCATION November 17 - November 17, 2020 Würzburg
ff Mineral oils and related hydrocarbons
ff Material selection for seals and their application
ff Environmentally friendly hydraulic fluids
Electric drives
Electric drives
April 6 - April 8, 2020 Würzburg
and controls
and controls
in hydraulic systems Please contact us for more dates and individual
July 27 - July 29, 2020 Würzburg ff Flame resistant hydraulic fluids
ff Interactions in conjunction with hydraulic fluids training courses. We would be happy to help you.
November 30 - December 2, 2020 Würzburg
ff Designing static and dynamic sealing systems
LEARNING TARGETS
(installation spaces, surface condition, seal design) TRAINING TIME
Please contact us for more dates and individual ff Gaining basic knowledge of the development,
ff Information on installation
Tightening
Tightening
1 Day: 9:00 AM – 4:00 PM
systems
systems
training courses. We would be happy to help you. composition, properties and standardization of
ff Causes of seal damage
various hydraulic fluids
TRAINING TIME PRICE
LEARNING TARGET
3 days: PREREQUISITE €380.00 (net) / €452.20 (gross)
ff Learning:
technology
technology
Welding
Welding
Day 1 10:00 AM – 4:15 PM eT-HT-FLUIDS or comparable knowledge
-- The rules for selecting and installing seals
Day 2 8:00 AM – 4:15 PM Book the eT-HT-FLUIDS at the same time and receive
-- The properties of elastomers
Day 3 8:00 AM – 12:30 PM a discount of €150.
-- How sealing materials work
-- Product trends and prospects
Linear motion
Linear motion
and assembly
and assembly
NOTES
technology
technology
PRICE
PREREQUISITE €1,353.00 (net) / €1,610.07 (gross) You can find the current offer online at:
www.boschrexroth.com/training
Completion of the HTG/eHTB and eHTVT training
ADVANCED TRAINING COURSES
courses or comparable knowledge
Pneumatics
Pneumatics
HT-WI, other training courses on the
Industrial Hydraulics learning path
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
scalable motion control systems
eDrive & Control
Academy
Automation Studio™ software.
hydraulics
hydraulics
Industrial
Industrial
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP
ff Getting started with Automation Studio™ P6.2 Service technicians, planners/application engineers
ff Configuring components and trainers
ff Simulating errors
Automation and
Automation and
ff Tools that can be used within the simulation DATES (GERMAN) TRAINING
Industry 4.0
Industry 4.0
ff Project documentation and organization LOCATION
ff Configuring Automation Studio™
ff Environmental parameters March 16 - March 18, 2020 München
ff Specific actuator settings November 9 - November 11, 2020 München
Electric drives
Electric drives
and controls
and controls
ff Configuring pumps and drives
ff Pressure and flow valve settings Please contact us for more dates and individual
ff Directional control valve settings training courses. We would be happy to help you.
ff Line modeling
ff Configuring mechanical elements TRAINING TIME
Tightening
Tightening
systems
systems
ff Fluid conditioning
3 days:
ff Simulator settings
Days 1 to 3 8:30 AM – 5:00 PM
LEARNING TARGET
PRICE
technology
technology
Welding
Welding
ff Being able to efficiently create hydraulic circuit
diagrams €2,175.00 (net) / €2,588.25 (gross)
ff Being able to simulate simple and complex
hydraulic systems NOTICE
Linear motion
Linear motion
and assembly
and assembly
ff Knowing how to validate and analyze the system
technology
technology
You can find current information at:
behavior
www.famictech.com > Products > Automation Studio™
ff Being able to configure the fluid and component
Professional Edition > Training
parameters
cc Directional control valve with cc VT-HMC with digital axis control cc MLC for hydraulic drives
ff Knowing how to adjust the user interface of
integrated digital axis controller
Pneumatics
Pneumatics
The organizer is Famic Technologies GmbH,
Automation Studio™ P6.2 (IAC Multi-Ethernet)
ff Knowing how to document the system 80992 Munich, Germany. The billing is also done there.
PREREQUISITE
Safety technology
Safety technology
Basic knowledge of hydraulics technology
and symbols
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-IAC-HMC1
VT-HMC Hydraulic axis controller/IAC
New training
New training
courses
courses
multi-ethernet valve
eDrive & Control
Academy
This training course addresses the basic structures of the best-in-class
controller. You will work on a hydraulic axis with the IAC Multi-Ethernet
valve or the VT-HMC motion controller. Within the scope of the practical
hydraulics
hydraulics
Industrial
Industrial
tasks, you will commission the hydraulic components with IndraWorks Ds.
You will become familiar with the hardware and software properties of the
products, as well as the optimization options for this best-in-class
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
controller. The course also focuses on communication with the higher
control system.
Automation and
Industry 4.0
Industry 4.0
ff Hardware and software properties of the IAC If you have no previous knowledge of hydraulics, 3 days:
Multi-Ethernet valves and the VT-HMC motion you must first complete the HTG training course or Day 1 10:00 AM – 4:30 PM
controller the eHTB and eHTVT eLearning courses. Day 2 8:00 AM – 4:30 PM
ff Structure and initial commissioning of a hydraulic A further prerequisite is the completion of the Day 3 8:00 AM – 4:30 PM
Electric drives
Electric drives
and controls
and controls
axis on the training system with the IAC DCA_eT_Controller eTraining course/webinar.
Multi-Ethernet valve or the VT-HMC motion PRICE
controller TARGET GROUP
€1,508.00 (net) / €1,794.52 (gross)
ff Carrying out axis motions in position control,
Service technicians, planners/application engineers,
Tightening
Tightening
pressure/force control and with the substitutional
systems
systems
managers and trainers ADVANCED TRAINING COURSES
closed-loop control (position and force control)
ff Being able to optimize the axis controller HTP-HMC2
DATES (GERMAN) TRAINING
ff Understanding the procedure for commissioning
LOCATION
the products NOTICE
technology
technology
Welding
Welding
ff Structure of communication with a higher control April 27 - April 29, 2020 Würzburg
You can find the current offer online at:
system via PROFINET.RT October 19 - October 21, 2020 Würzburg
www.boschrexroth.com/training
Linear motion
and assembly
and assembly
technology
technology
LOCATION
ff Familiarity with the structure and use of IAC
Multi-Ethernet valves and the VT-HMC motion September 7 - September 9, 2020 Würzburg
controller
ff Understanding the procedure for commissioning Please contact us for more dates and individual
Pneumatics
Pneumatics
the products training courses. We would be happy to help you.
ff Being able to set up communication with a higher
control system
ff Being able to analyze data
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-HMC2 HTP-PRO
Motion control for hydraulics Project planning and programming
New training
New training
courses
courses
programming the VT-HMC motion controller for VT-HMC and IndraMotion MLC
eDrive & Control
Academy
programmers who use the VT-HMC hydraulic motion controller by Rexroth. technicians who want to learn about the VT-HMC or IndraMotion MLC
This training shows how to work with the programming environment of the hydraulic motion systems. The training teaches the basic steps for using the
motion controller. Within the scope of practical exercises, you will program IndraWorks engineering tool and helps prepare participants for special
hydraulics
hydraulics
Industrial
Industrial
motion sequences in IndraWorks based on the IEC 61131-3 standard. product training courses. The course focuses on project planning and
programming in IndraWorks. Using practical exercises, participants will
CONTENTS TARGET GROUP configure the IndraMotion MLC system and learn various programming
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Parameterizing the system with IndraWorks MLD Service technicians, programmers, methods in accordance with IE 61131-3.
ff The programming environment of the planners/application engineers and managers
motion controller
CONTENTS PREREQUISITE
ff Programming motion sequences using IEC 61131-3 DATE (GERMAN/ENGLISH) TRAINING LOCATION
Automation and
Automation and
ff Overview of the VT-HMC and IndraMotion Computer skills and technical understanding of
Industry 4.0
Industry 4.0
ff Carrying out axis motions in position control and
Dates and training locations available on request
pressure/force control as well as with the MLC system solutions electrical engineering and hydraulics concepts
substitutional closed-loop control ff Introduction to the system components
TRAINING TIME
ff Backing up data and replacing components with ff System project planning with IndraWorks TARGET GROUP
the VT-HMC system 2 days: ff Basics of IEC programming
Electric drives
Electric drives
and controls
and controls
Service technicians, programmers and
Day 1 8:00 AM – 4:30 PM ff Structured Text (ST) programming
planners/application engineers
LEARNING TARGET Day 2 8:00 AM – 1:00 PM ff Backing up data and replacing components with
the IndraMotion MLC system
ff Familiarity with the structure and use of the DATE (GERMAN/ENGLISH) TRAINING LOCATION
PRICE ff Archiving and restoring IndraWorks projects
VT-HMC motion controller
Tightening
Tightening
Dates and training locations available on request
systems
systems
ff Being able to program and optimize motion €879.00 (net) / €1,046.01 (gross)
LEARNING TARGET
sequences
TRAINING TIME
ff Being able to analyze data NOTICE ff Being familiar with the VT-HMC and IndraMotion
MLC systems 5 days:
You can find the current offer online at:
technology
technology
PREREQUISITE ff Learning how to use IndraWorks for project Day 1 10:00 AM – 4:30 PM
Welding
Welding
www.boschrexroth.com/training
planning and diagnostics Days 2 to 4 8:00 AM – 4:30 PM
This training builds on the HTP-IAC-HMC1 training.
ff Understanding the basics of IEC programming Day 5 8:00 AM – 1:00 PM
Therefore, this training course must be completed
ff Gaining knowledge on Structured Text (ST)
first.
Linear motion
Linear motion
and assembly
and assembly
programming PRICE
technology
technology
Participation with no programming knowledge is
ff Ability to back up and restore data
recommended and the eESTG eLearning course €2,093.00 (net) / €2,490.67 (gross)
should be completed in advance. Completion of the
HTP-PRO training course is also a prerequisite. ADVANCED TRAINING COURSES
Pneumatics
Pneumatics
HTP-MLC, HTP-HMC2
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTP-MLC HTP-CytroPac
IndraMotion MLC for hydraulic drives Commissioning CytroPac
New training
New training
courses
courses
eDrive & Control
Academy
technicians who use the IndraMotion MLC system for hydraulic drives. small aggregate with multi-Ethernet connection to superordinate command
This course focuses on integrating hydraulics into overall systems and communication levels. The main topics are project planning, commissioning,
programming motion sequences. Using practical exercises, participants will parameterization and network connection will be taught in theory and
hydraulics
hydraulics
Industrial
Industrial
commission the hydraulic components with IndraWorks and become practice.
familiar with the structures and optimization options for this best-in-class
controller. Working with the IndraWorks programming platform will also be CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
addressed in practical exercises. ff Basics of a variable speed drive Service technicians, operators and
ff Parameter structure EFC5610 planners/application engineers
ff CytroPac-specific settings
CONTENTS PREREQUISITE
ff System limits DATES (GERMAN) TRAINING
Automation and
Automation and
LOCATION
Industry 4.0
Industry 4.0
ff IndraMotion MLC system project planning for ff For participants in the hydraulics field: ff Integration via bus technology
hydraulic drives with IndraWorks Completion of the HTP-PRO training course or ff Configuration via IndraWorks DS
May 28 - May 29, 2020 Würzburg
ff Integrating and adapting the Generic Application comparable knowledge ff Troubleshooting
July 13 - July 14, 2020 Würzburg
Template ff For participants in the electrics field:
November 5 - November 6, 2020 Würzburg
ff Programming of motion sequences with Completion of the DCA_eT_Controller eTraining LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
AxisInterface course/webinar or comparable knowledge
ff Overview of the structure and function of CytroPac DATE (ENGLISH) TRAINING
ff Structure and initial commissioning of a
-- Connections, power, cooling, accessories LOCATION
hydraulic axis on the test rig TARGET GROUP
-- Documentation (RD51055, RD51055-B)
ff Testing different controller settings and analyzing August 13 - August 14, 2020 Würzburg
Service technicians, programmers and -- Media: Rexroth ICS, AB WIKI
Tightening
Tightening
the control behavior and control quality
systems
systems
planners/application engineers ff Commissioning CytroPac
ff Being able to analyze data Please contact us for more dates and individual
-- Connect correctly, configuration, start system,
ff Parameterization and optimization of training courses. We would be happy to help you.
DATES (GERMAN) TRAINING LOCATION optimize system
a substitutional closed-loop control
(position and force control) June 22 - June 26, 2020 Würzburg TRAINING TIME
technology
technology
PREREQUISITE
Welding
Welding
2 days:
LEARNING TARGET DATE (ENGLISH) TRAINING Completion of the HTG/eHTB and eHTVT
Day 1 10:00 AM – 4:15 PM
LOCATION training courses or comparable knowledge
ff Being able to integrate hydraulic drives into the Day 2 8:00 AM – 3:00 PM
Linear motion
Linear motion
and assembly
and assembly
IndraMotion MLC system October 26 - October 30, 2020 Würzburg
technology
technology
ff Understanding the steps for commissioning PRICE
a hydraulic axis TRAINING TIME
€879.00 (net) / €1,046.01 (gross)
ff Knowing the structure and use of the
5 days:
Generic Application Template (GAT)
Pneumatics
Pneumatics
Day 1 10:00 AM – 4:30 PM NOTICE
ff Being able to program motion sequences with
Days 2 to 4 8:00 AM – 4:30 PM
AxisInterface You can find the current offer online at:
Day 5 8:00 AM – 1:00 PM
ff Being able to optimize the axis controller www.boschrexroth.com/training
Safety technology
Safety technology
PRICE
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EH-SYT_SvP-I@ EH-SYT_FcP_IN@
Sytronix SvP – Sytronix FcP/DRN 5020 –
New training
New training
courses
courses
Basics, parameterization and commissioning Parameterization and commissioning
eDrive & Control
Academy
drive. You will become familiar with the hardware and software properties of DRn 5020 Sytronix drives. You will become familiar with the hardware and
the products, as well as the optimization options for the Sytronix drive. software properties of the products as well as the optimization options for
One of the practical tasks is commissioning a Sytronix drive. The course also the drives. One of the practical tasks is commissioning the Sytronix drives.
hydraulics
hydraulics
Industrial
Industrial
focuses on communication with the higher control system. Participants are The course also focuses on communication with the higher control system.
required to bring their own laptops to be able to work with the software tool Participants are required to bring their own laptops to be able to work with
and forms. the software tool and forms.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP CONTENTS TARGET GROUP
Automation and
Automation and
Industry 4.0
Industry 4.0
ff System introduction Service technicians, planners/application engineers, ff System introduction Service technicians, planners/application engineers
ff Hardware and software overview of the managers and trainers ff Hardware and software overview of the and trainers
SvP 7020 system FcP 5020 system
ff Operating modes DATES (GERMAN) TRAINING ff Functionality and properties of the system DATES (GERMAN) TRAINING
ff Back-up and restore LOCATION components LOCATION
Electric drives
Electric drives
and controls
and controls
ff Commissioning the components ff Parameterization of the EFC5610 frequency
April 15 - April 16, 2020 Würzburg August 31 - September 1, 2020 Würzburg
ff Diagnostics and troubleshooting on the converter
November 3 - November 4, 2020 Würzburg December 3 - December 4, 2020 Würzburg
training system ff Practical exercises on the training system
ff Practical exercises ff Commissioning an EFC5610
DATE (ENGLISH) TRAINING DATE (ENGLISH) TRAINING
Tightening
Tightening
systems
systems
LOCATION LOCATION
LEARNING TARGET LEARNING TARGET
October 15 - October 16, 2020 Würzburg December 14 - December 15, 2020 Würzburg
ff Being able to commission the system ff Knowing the basics of asynchronous motors on
ff Knowing how to replace components (IndraDrive C, frequency converters
Please contact us for more dates and individual Please contact us for more dates and individual
technology
technology
motor, pump, mechanics and sensors) ff Knowing how to commission and parameterize
Welding
Welding
training courses. We would be happy to help you. training courses. We would be happy to help you.
ff Knowing the features of IndraDrive C servo drives the system
ff Knowing how to troubleshoot ff Knowing the basics of hydraulic fixed and variable
TRAINING TIME TRAINING TIME
ff Knowing about sensors in hydraulic systems displacement pumps
Linear motion
Linear motion
and assembly
and assembly
2 days: ff Knowing about sensors in hydraulic systems 2 days:
technology
technology
PREREQUISITE Day 1 10:00 AM – 4:30 PM Day 1 10:00 AM – 4:30 PM
Day 2 8:00 AM – 3:00 PM PREREQUISITE Day 2 8:00 AM – 3:00 PM
ff Basics of hydraulics
ff HTPPu pump training ff Basics of hydraulics
PRICE PRICE
Pneumatics
Pneumatics
ff EAT-ID-I, EAT-ID-Kompakt training courses ff HTPPu pump training
ff Computer skills €1,020.00 (net) / €1,213.80 (gross) ff Computer skills €1,020.00 (net) / €1,213.80 (gross)
ff Technical understanding of electrical engineering ff Technical understanding of electrical engineering
and hydraulics concepts NOTICE and hydraulics concepts NOTICE
Safety technology
Safety technology
ff Basic knowledge of frequency converters
You can find the current offer online at: You can find the current offer online at:
www.boschrexroth.com/training www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
Notes
Industrial hydraulics
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service Programmers Planners/ Managers Trainers
Systems operators Software Decision-makers Teachers
Face-to-face technicians application engineers
training Assembly personnel developers Executives Trainers
Service personnel Project engineers
IT specialists Plant managers
Maintenance personnel Developers/ design
Commissioning Proprietors
eLearning Commissioning engineers engineers
engineers Buyers
Mechanical engineers Technical sales
Electricians
hydraulics
hydraulics
Industrial
Industrial
MOBILE HYDRAULICS: BASIC TRAINING
NEW 105 eHTB Basic knowledge of hydraulics ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
NEW 107 eV-SM Valve technology – Control blocks of mobile hydraulics ● ● ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
110 HTAM Mobile hydraulics – Axial piston units ● ● ● ● ●
111 HTM-OK Basics of mobile hydraulics – Open circuits with practical exercises ● ● ● ● ● ●
Electric drives
NEW 113 HTM-LS Load sensing controls with practice intensive training
and controls
and controls
● ● ● ● ● ●
Tightening
systems
systems
NEW 117 HTAS Stationary and mobile hydraulics – Axial piston units ● ● ● ●
technology
Welding
Welding
120 HTM-CP "Experience" mobile hydraulics ● ● ● ●
Linear motion
and assembly
and assembly
technology
technology
NEW 122 HTM-M4 M4 Product training ● ● ● ● ● ●
Pneumatics
126 HTM-HFKB Hydraulic power brakes ● ● ● ● ●
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
102 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 103
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service Programmers Planners/ Managers Trainers
Systems operators Software Decision-makers Teachers
Face-to-face technicians application engineers
training Assembly developers Executives Trainers
Service personnel Project engineers
personnel IT specialists Plant managers
Maintenance personnel Developers/
Commissioning Proprietors
eLearning Commissioning engineers design engineers
engineers Buyers
Mechanical engineers Technical sales
Electricians
hydraulics
hydraulics
Industrial
Industrial
MOBILE ELECTRONICS: BASIC TRAINING
128 eT-BODAS-BT Basic training in BODAS mobile electronics ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
MOBILE ELECTRONICS: INTERMEDIATE TRAINING
130 BODAS Diagnostic Tools Introduction to BODAS diagnostic tools and CAN standard SAE J1939 ● ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
134 BODAS-ASrun-AFC BODAS-Automatic fan control AFC application software ● ● ● ●
Electric drives
and controls
and controls
132 eDA-PR eDA Practice Day ● ● ● ●
Working with open BODAS-design standard application software for dual-circuit drive systems
137 BODAS-drive-DPC ●
(chain drives)
138 BODAS-C-API-BR3x Programming series 3x RCs with C-API ● ●
Tightening
systems
systems
NEW 140 BODAS-Display-DI4 Introduction to the programming of a DI4 (HMI) with CODESYS and Rexroth software package ● ●
NEW 142 OHS-MH System training for Off-highway specialists (mobile hydraulics) ● ●
technology
technology
Welding
Welding
143 REXROTH MOBILE HYDRAULICS – MODULE OVERVIEW INDIVIDUAL TRAINING
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
104 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy 28 Drive
eDrive& &Control
ControlAcademy
Academy| Training Program 2020 Training Program
Mobile2020 | Drive & Control
hydraulics/mobile Academy
electronics 105
New training
New training
courses
courses
courses
eDrive & Control
Academy
Academy
BASIC TRAINING INTERMEDIATE SPECIAL TRAINING
hydraulics whereby the physical basics such as the connection between
TRAINING
dd Mobile hydraulics force and mass and graphic symbols are discussed. Furthermore,
the structure of hydraulic systems and the required components as well as
NEU
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
2 3
eHTB HTAM HTM-GK their functions are explained.
Basic knowledge of Mobile hydraulics – Mobile hydraulics –
hydraulics Axial piston units Closed circuits
(eLearning) 5
HTM-CP CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile electronics
p. 105 p. 110 p. 118
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
"Experience"
mobile hydraulics
NEU 4 2 f General definition and typical applications Operators, service engineers, programmers,
eHKS HTM-OK HTM-LS-PR
Hydraulic circuits Basics of mobile LS and LUDV systems
p. 120 f Connection between mass and force, planners/implementers, managers, trainers
and control types hydraulics –
(eLearning) Open circuits with
compared and pressure calculation, physical basics
combined
practical exercises
f Structure of a hydraulic system, function groups TRAINING TIME
Automation and
Automation and
Automation and
p. 106 p. 111 p. 119
Industry 4.0
Industry 4.0
Industry 4.0
of the system and important components
NEU NEU
During the license term, the eLearning is available
1 f Representation of the components as
eV-SM HTM-OC at any time. The license period is 12 months after
Valve technology – Throttle control with graphic symbols
Control blocks of practice intensive activation.
mobile hydraulics training f Task and mechanism of hydraulic pumps and
(eLearning)
common models, calculation of the pump capacity
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
p. 107 p. 112
Duration: approx. 7 to 8 hours
f Energy conversion of the hydraulic motors,
NEU NEU 1
efficiency of the motors
eHGE HTM-LS AVAILABLE LANGUAGES
Gear units Load sensing controls f Tasks and structure of hydraulic cylinders,
(eLearning) with practice intensive
training connection between speed, flow and piston force German, English
Tightening
Tightening
Tightening
systems
systems
systems
p. 108 p. 113
technology
technology
their functions
Welding
Welding
Welding
p.
P.109
xx p.
P.114
xx
f Basic knowledge of technical physics Price for multi-user licenses upon request
5
f Understanding the basic structure of stationary
HTM-AG
Mobile hydraulics in and mobile hydraulic systems NOTICE
agricultural engineering BOSCH REXROTH
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
INDIVIDUALLY BOOKABLE PRODUCT TRAINING You can find the current offer online at:
p. 115 COURSES PREREQUISITE
www.boschrexroth.com/elearning
5 NEU 1 NEU 1 NEU 1 f Technical understanding
HTM-C
Mobile hydraulics in
HT-FLUIDS-MH HTM-M4 HTM-M7 f PC with Internet access, Flash Player 10 or
Hydraulic fluids M4 Product training M7 Product training
Pneumatics
Pneumatics
Pneumatics
construction machinery in mobile applications higher: http://get.adobe.com/de/flashplayer
f Email address for personal login
p. 116 p. 121 p. 122 p. 123
NEU 2 2 2 1
Safety technology
Safety technology
Safety technology
HTAS HTA1 HTA2 HTM-HFKB
Stationary and mobile Hydraulics training Hydraulics training Hydraulic power brakes
hydraulics – Axial piston – Axial piston units – Axial piston units
units A10, A1 A4VSO, A15
@
NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
30
106 eDrive
Mobile &
hydraulics/mobile
Control Academyelectronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile
eDrive & Control
electronics
Academy 107
31
eHKS eV-SM
Hydraulic circuits and control types (eLearning) Valve technology –
New training
New training
courses
courses
Control
Control blocks of mobile hydraulics
blocks of mobile hydraulics (eLearning)
eDrive & Control
Academy
closed and open circuits. Circuit diagrams and the components used are of various series and designs. You will gain knowledge on energy controls
described here. Furthermore, different mobile hydraulic control types are and throttle, pump, load sensing and LUDV control systems.
presented.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TRAINING TIME CONTENTS TRAINING TIME
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
f Structure and function of a closed circuit During the license term, the eLearning is available f Tasks of the control blocks During the license term, the eLearning is available
f Structure and function of an open circuit at any time. The license period is 12 months after f Different versions of the control blocks at any time. The license period is 12 months after
f Various types of mobile hydraulic control systems activation. f Various control types (throttle control, activation.
f Control types and energy balance load sensing, etc.)
Automation and
Automation and
Industry 4.0
Industry 4.0
Duration: approx. 45 minutes f Structure of various control blocks Duration: approx. 35 minutes
LEARNING TARGET
AVAILABLE LANGUAGES LEARNING TARGET AVAILABLE LANGUAGES
f Mobile applications features
f Function and area of application of the German, English f Being able to name the tasks and features of German, English
Electric drives
Electric drives
and controls
and controls
closed circuit control blocks
f Function and area of application of the PRICE f The principle of energy control PRICE
open circuit f Being familiar with the plate, monoblock and
€48.00 (net) / €57.12 (gross) €48.00 (net) / €57.12 (gross) per year
f Describing the different types of mobile hydraulic combined design
per year
control systems and their tasks f Control blocks of throttle, pump, load sensing
Tightening
Tightening
Price for multi-user licenses upon request
systems
systems
f Explaining the main functions and the and LUDV control systems
Price for multi-user licenses upon request
energy balance
NOTICE
PREREQUISITE
NOTICE
PREREQUISITE You can find the current offer online at:
f Technical understanding
technology
technology
You can find the current offer online at: www.boschrexroth.com/elearning
Welding
Welding
f Technical understanding f PC with Internet access, Flash Player 10 or
www.boschrexroth.com/elearning
f PC with Internet access, Flash Player 10 or higher: http://get.adobe.com/de/flashplayer
higher: http://get.adobe.com/flashplayer f Email address for personal login
f Email address for personal login
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP
TARGET GROUP
Operators, service engineers, programmers,
Operators, service engineers, programmers, planners/implementers, managers, trainers
planners/implementers, managers, trainers
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eHGE eT-HT-FLUIDS
Gear units (eLearning) Hydraulic fluids
New training
New training
New training
courses
courses
courses
eDrive & Control
Academy
Academy
and their functions as well as on the differences between the different the safe and efficient operation of hydraulic systems. The requirements of
models. Furthermore, the course addresses the applications "driving", each application determine the type of hydraulic fluid needed. This training
"pivoting" and "lifting" by gears. course gives you basic information on the specific properties of base oils,
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
additives, formulated hydraulic fluids and their standardization.
Commissioning, operation and maintenance with references from practice
CONTENTS TRAINING TIME will also be addressed.
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
f Main tasks of the planetary gearboxes in vehicles During the license term, the eLearning is available
f Distinguishing features of planetary gearboxes at any time. The license period is 12 months after
f The most common gear types and their structure activation.
CONTENTS TARGET GROUP
f Structure and function of planetary gearboxes for
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
Industry 4.0
driving with and without a dynamic brake and for Duration: approx. 35 minutes f Hydraulic fluids as a design element Operators, service engineers, programmers,
pivoting and lifting f What hydraulic fluids do planners/implementers, managers, trainers
f Installation situations AVAILABLE LANGUAGES f Base fluids
f Additives and their effect TRAINING TIME
German, English
LEARNING TARGET f Oil properties
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
f Duration: approx. 2 hours
f Standardization
f Gaining knowledge on planetary gearboxes of PRICE f Training content available 24 hours per day
f Mineral oils and related hydrocarbons
various types and applications
€24.00 (net) / €28.56 (gross) f Environmentally friendly hydraulic fluids
f Understanding the tasks of the gears AVAILABLE LANGUAGES
per year f Flame resistant hydraulic fluids
Tightening
Tightening
Tightening
f Information on commissioning and German, English
systems
systems
systems
PREREQUISITE
Price for multi-user licenses upon request operation/maintenance and service
f Technical understanding PRICE
f PC with Internet access, Flash Player 10 or NOTICE LEARNING TARGET
€48.00 (net) / €57.12 (gross) per year
higher: http://get.adobe.com/de/flashplayer
technology
technology
technology
You can find the current offer online at: Gaining basic knowledge of the development,
Welding
Welding
Welding
f Email address for personal login
www.boschrexroth.com/elearning composition, properties and standardization of Price for multi-user licenses upon request
various hydraulic fluids as well as their use
TARGET GROUP
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
Operators, service engineers, programmers, PREREQUISITE
technology
technology
technology
planners/implementers, managers, trainers
f Technical understanding
f PC with Internet access, Flash Player 10 or
higher: http://get.adobe.com/flashplayer
Pneumatics
Pneumatics
Pneumatics
f Email address for personal login
Safety technology
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
@ @
HTAM HTM-OK
Mobile hydraulics – Axial piston units Basics of mobile hydraulics –
New training
New training
courses
courses
Open circuits with practical exercises
eDrive & Control
Academy
of Rexroth axial piston units in mobile applications. The control types for controls. It focuses on the structure, function and properties of select
pumps and motors in open and closed circuits will be addressed using Rexroth components and systems. Learn more about load-independent flow
examples from everyday practice. Practical exercises reinforce learning distribution as well as the differences between throttle and load sensing
hydraulics
hydraulics
Industrial
Industrial
content. control systems. On our test rig, you will learn how to calibrate and test,
and learn practical information about function and troubleshooting using
CONTENTS DATES (GERMAN) TRAINING our cutaway models.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Basics and features of mobile hydraulics
ff Structure and options for using axial piston units April 21 - April 22, 2020 Elchingen
and their control program (selected pumps and November 10 - November 11, 2020 Elchingen CONTENTS TARGET GROUP
motors such as A4VG, A6VM, A11VO)
ff Open-circuit axial piston units (A11VO, A10VO, Operators, service engineers, programmers,
Automation and
Automation and
DATE (ENGLISH) TRAINING
Industry 4.0
Industry 4.0
ff Information on the initial filling, commissioning,
A8VO): Structure, function and control types for planners/implementers, managers, trainers
servicing, availability, service life and hydraulic LOCATION
LS (Load Sensing), LUDV (load-independent flow
fluids of axial piston units
September 8 - September 9, 2020 Elchingen distribution) and positive control DATES (GERMAN) TRAINING
ff Disassembly and assembly of axial piston units
ff Energy balances and features of throttle and load LOCATION
Electric drives
Electric drives
and controls
and controls
Please contact us for more dates and individual sensing control systems in conjunction with the
LEARNING TARGET February 18 - February 21, 2020 Elchingen
training courses. We would be happy to help you. relevant pump control
May 5 - May 8, 2020 Elchingen
Gaining knowledge about the mechanical ff Overview of the structure, function and options
hydraulic structure and the options for using TRAINING TIME for using Rexroth SM, MO, M8, M9, SP08, M4, SB,
DATE (ENGLISH) TRAINING
axial piston units and their control program SX, M6 and M7 series mobile components LOCATION
Tightening
Tightening
2 days:
systems
systems
(control blocks and subsystem), RSM2 series
Day 1 9:00 AM – 4:00 PM October 6 - October 9, 2020 Elchingen
PREREQUISITE stabilization modules, MHDB series safety valves
Day 2 9:00 AM – 4:00 PM
and TH series pilot valves in theory and practice
Basic knowledge of hydraulics TRAINING TIME
PRICE
technology
technology
LEARNING TARGET
Welding
Welding
TARGET GROUP 4 days:
€849.00 (net) / €1,010.31 (gross) Day 1 9:00 AM – 4:00 PM
ff Knowing about control systems for axial piston
Operators, service technicians, programmers, Days 2 and 3 8:00 AM – 4:00 PM
units and how they interact with the valve
planners/application engineers, trainers ADVANCED TRAINING COURSES Day 4 8:00 AM – 2:00 PM
components
Linear motion
Linear motion
and assembly
and assembly
technology
technology
HTM-GK ff Knowing the various control types, their features
PRICE
and variants
NOTICE ff Recognizing malfunctions and localizing the €1,575.00 (net) / €1,874.25 (gross)
affected components
Participants must bring suitable protective clothing
Pneumatics
Pneumatics
ADVANCED TRAINING COURSES
to the training course (safety shoes, work clothing).
PREREQUISITE
HTM-LS-PR
You can find the current offer online at: Basic knowledge of hydraulics, eBMH or
www.boschrexroth.com/training comparable knowledge NOTICE
Safety technology
Safety technology
Participants must bring suitable protective clothing
to the training course (safety shoes, work clothing).
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-OC HTM-LS
Throttle control with practice intensive training Load sensing controls with
New training
New training
courses
courses
practice intensive training
eDrive & Control
Academy
technical knowledge of the products SM, MO, M8 and M9 and learn in You will gain technical knowledge of the products SBX4, M4 and SP08 and
which applications these components can be used. On a practical training learn in which applications these components can be used. On a practical
system, you will build a throttle control and commission it with all required training system, you will build various LS controls and commission them
hydraulics
hydraulics
Industrial
Industrial
calibrations. with all required adjustments.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Basic information, set-up and function of Operators, service engineers, programmers,
throttle controls planners/implementers, managers, trainers
CONTENTS TARGET GROUP
ff Negative and positive control systems
ff Examples of current applications DATES (GERMAN) TRAINING LOCATION ff Basic information, set-up and function of Operators, service engineers, programmers,
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Set-up of a throttle control at the practice system LS controls planners/implementers, managers, trainers
January 14, 2020 Elchingen
ff Practice-related commissioning and optimization ff OS and CC LS systems
August 25, 2020 Bochum
ff Examples of current applications DATES (GERMAN) TRAINING LOCATION
LEARNING TARGET ff Set-up of various LS controls at the
Please contact us for more dates and individual January 15, 2020 Elchingen
practice system
Electric drives
Electric drives
and controls
and controls
ff Being familiar with the throttle control training courses. We would be happy to help you. August 26, 2020 Bochum
ff Practice-related commissioning and optimization
ff Being familiar with products as well as with their
structure and function TRAINING TIME Please contact us for more dates and individual
LEARNING TARGET
ff Knowing where the control type training courses. We would be happy to help you.
1 day: 9:00 AM – 4:00 PM
ff is still in use today ff Being familiar with the LS control
Tightening
Tightening
systems
systems
ff Practical set-up and commissioning ff Being familiar with the products as well as with TRAINING TIME
PRICE
ff Assessing the operating behavior their structure and function
1 day: 9:00 AM – 4:30 PM
ff Identifying faults and troubleshooting €440.00 (net) / €523.60 (gross) ff Knowing where the control type is still in
use today
PRICE
technology
technology
PREREQUISITE ADVANCED TRAINING COURSES ff Practical set-up and commissioning
Welding
Welding
ff Assessing the operating behavior €440.00 (net) / €523.60 (gross)
Completion of the eBMH, eT-HT-FLUIDS HTM-LS-PR
ff Identifying faults and troubleshooting
training course or comparable knowledge
ADVANCED TRAINING COURSES
NOTICE
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE
technology
technology
HTM-LS-PR
Participants must bring suitable protective clothing
Completion of the eBMH, eT-HT-FLUIDS
to the training course (safety shoes, work clothing).
training course or comparable knowledge NOTICE
You can find the current offer online at: Participants must bring suitable protective clothing
Pneumatics
Pneumatics
www.boschrexroth.com/training to the training course (safety shoes, work clothing).
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-LUDV HTM-AG
LUDV with practice intensive training Mobile hydraulics in agricultural engineering
New training
New training
courses
courses
eDrive & Control
Academy
technical knowledge of the products SX, RS and M6 and learn in which Learn about the components and systems of Rexroth mobile hydraulics in
applications these components can be used. use. In addition to explanations on structure and function, you will learn
how to properly disassemble and assemble selected assemblies, such as
hydraulics
hydraulics
Industrial
Industrial
axial piston units or valve blocks. You will then have the opportunity to get
to know the properties of the innovative EHC electro-hydraulic lifting unit
CONTENTS TARGET GROUP from Rexroth while you steer a tractor.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Basic information, set-up and function of Operators, service engineers, programmers,
LUDV controls planners/implementers, managers, trainers
CONTENTS TARGET GROUP
ff Systems with and without a "rest delivery volume"
ff Examples of current applications DATES (GERMAN) TRAINING LOCATION ff Load-compensated hydraulic systems Service technicians, planners/application engineers,
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Set-up of a LUDV control at the practice system ff Structure and function of mobile directional trainers
January 16, 2020 Elchingen
ff Practice-related commissioning and optimization control valve blocks
August 27, 2020 Bochum
ff Comparing constant flow and constant DATES (GERMAN) TRAINING
LEARNING TARGET pressure systems LOCATION
Please contact us for more dates and individual
ff Proportional valves with CAN BUS for
Electric drives
Electric drives
and controls
and controls
ff Being familiar with the LUDV control training courses. We would be happy to help you. May 11 - May 15, 2020 Ede/Netherlands
mobile hydraulics
ff Being familiar with the products as well as with September 7 - September 11, 2020 Ede/Netherlands
ff EHC electro-hydraulic lifting unit for tractors and
their structure and function TRAINING TIME
harvesters
ff Knowing where the control type is still in Please contact us for more dates and individual
1 day: 9:00 AM – 4:00 PM ff Application examples
use today training courses. We would be happy to help you.
Tightening
Tightening
ff Disassembling and assembling select
systems
systems
ff Practical set-up and commissioning
PRICE components, such as an A10VO axial piston unit
ff Assessing the operating behavior TRAINING TIME
or a SB12; SB23; EHR; EHS; M valve block
ff Identifying faults and troubleshooting €440.00 (net) / €523.60 (gross)
ff Practical exercises 5 days:
Day 1 10:00 AM – 4:15 PM
technology
technology
PREREQUISITE ADVANCED TRAINING COURSES
Welding
Welding
LEARNING TARGET Days 2 to 4 8:00 AM – 4:15 PM
Completion of the eBMH, eT-HT-FLUIDS training HTM-LS-PR Day 5 8:00 AM – 1:00 PM
ff Knowing how to optimize hydraulic systems based
course or comparable knowledge
on performance
NOTICE PRICE
Linear motion
Linear motion
and assembly
and assembly
ff Understanding the technology of load sensing,
technology
technology
Participants must bring suitable protective clothing proportional and closed-loop control valves €2,010.00 (net) / €2,391.90 (gross)
to the training course (safety shoes, work clothing). ff Being familiar with the requirements for using this
technology NOTICE
You can find the current offer online at:
Pneumatics
Pneumatics
Participants must bring suitable protective clothing
www.boschrexroth.com/training PREREQUISITE
to the training course (safety shoes, work clothing).
Completion of the eBMH training course or
comparable knowledge The organizer is Bosch Rexroth B.V. in Boxtel/
Safety technology
Safety technology
Netherlands. The billing is also done there.
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-C HTAS
Mobile hydraulics in construction machinery Stationary and mobile hydraulics –
New training
New training
courses
courses
Axial piston units
eDrive & Control
Academy
practical training course. In addition to explanations on structure and operation of axial piston units in stationary and mobile applications.
function, you will learn how to properly disassemble and assemble selected You will be familiarized with the technology of axial piston units,
assemblies, such as axial piston units or valve blocks. You will then have the from circuit types to different adjustments.
hydraulics
hydraulics
Industrial
Industrial
opportunity to extensively test the properties of the Rexroth components.
A diverse range of equipped machinery is placed at your disposal.
CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Product overview of axial piston units
ff Structure, function and options for using axial January 28 - January 29, 2020 Horb
CONTENTS TARGET GROUP
piston units and their control program, March 24 - March 25, 2020 Bochum
ff Components and systems for load-dependent and Service technicians, planners/application engineers, primarily A10VSO, A4VSO, A15, A6 and A7 May 12 - May 13, 2020 Horb
Automation and
Automation and
Industry 4.0
Industry 4.0
load-compensated hydraulics trainers ff Differences between stationary and
ff Structure and function of axial piston units and mobile hydraulics DATE (ENGLISH) TRAINING
their control DATES (GERMAN) TRAINING ff Information on assembly, disassembly and LOCATION
ff Structure and function of mobile directional LOCATION calibration
September 15 - September 16, 2020 Horb
control valve blocks ff Information on commissioning and maintenance
Electric drives
Electric drives
and controls
and controls
September 7 - September 11, 2020 Ede/Netherlands
ff Comparing constant flow and constant pressure
Please contact us for more dates and individual
systems LEARNING TARGET
Please contact us for more dates and individual training courses. We would be happy to help you.
ff Open and closed circuits
training courses. We would be happy to help you. Gaining knowledge of the mechanical hydraulic
ff Introduction to safety valve technology
structure, function and options for using axial piston TRAINING TIME
Tightening
Tightening
ff Application examples
systems
systems
TRAINING TIME units and their control program
ff Disassembling and assembling select 2 days:
components, such as an A4VG or A6VM axial 5 days: Day 1 9:00 AM – 4:00 PM
PREREQUISITE
piston unit or a M4; M6; M7 valve block Day 1 10:00 AM – 4:15 PM Day 2 9:00 AM – 4:00 PM
ff Practical exercises Days 2 to 4 8:00 AM – 4:15 PM ff Completion of the eBMH, eT-HT-FLUIDS training
technology
technology
Welding
Welding
Day 5 8:00 AM – 1:00 PM course or comparable knowledge PRICE
LEARNING TARGET ff Basic knowledge of hydraulics
€849.00 (net) / €1,010.31 (gross)
PRICE
ff Knowing how to optimize hydraulic systems based
TARGET GROUP
Linear motion
Linear motion
and assembly
and assembly
on performance, power distribution and €2,010.00 (net) / €2,391.90 (gross) NOTICE
technology
technology
controllability Operators, service technicians, planners/application
You can find the current offer online at:
ff Being familiar with OC and CC valve technology, NOTICE engineers, trainers
www.boschrexroth.com/training
load sensing and LUDV valve technology as well as
Participants must bring suitable protective clothing
proportional and closed-loop control valve
Pneumatics
Pneumatics
to the training course (safety shoes, work clothing).
technology
Safety technology
Completion of the eBMH training course or
comparable knowledge
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-GK HTM-LS-PR
Mobile hydraulics – Closed circuits LS and LUDV systems compared and combined
New training
New training
courses
courses
eDrive & Control
Academy
and winch drives) with the products of Bosch Rexroth. Gain a better and do you want to deepen your knowledge? This training offers different
understanding of these systems in theory and practice. examples in theory and practice for showing in detail how these concepts
work. In practical exercises on a training system, you will become familiar
hydraulics
hydraulics
Industrial
Industrial
with the specific differences and features of the various types of control.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS DATES (GERMAN) TRAINING CONTENTS DATES (GERMAN) TRAINING
LOCATION LOCATION
ff Structure and function of hydrostatic travel drives ff Principle of load-dependent control and flow
(A4VG...DA; A6VM…DA/HA) and hydrostatic winch February 4 - February 6, 2020 Elchingen distribution using numerous sample applications March 10 - March 11, 2020 Elchingen
drives (A4VG…EP/HD; A6VM…EP/HD) November 17 - November 19, 2020 Elchingen ff Practical structure of the different control May 26 - May 27, 2020 Elchingen
Automation and
Automation and
systems on a training system
Industry 4.0
Industry 4.0
ff Approaching travel drives by the following
examples: 1+0, 1+1 Shift on Fly, 2+1 DATE (ENGLISH) TRAINING ff Load sensing control (LS) DATE (ENGLISH) TRAINING
ff Practical exercises: Assembly, disassembly and LOCATION ff Load-independent flow distribution LOCATION
calibration on the units ff Load sensing control (LS) and load October 13 - October 14, 2020 Elchingen
September 22 - September 24, 2020 Elchingen
ff Practice-related commissioning and pressure-independent flow distribution (LUDV)
Electric drives
Electric drives
and controls
and controls
troubleshooting and combinations of these Please contact us for more dates and individual
Please contact us for more dates and individual
ff Determining power requirements in different training courses. We would be happy to help you.
training courses. We would be happy to help you.
LEARNING TARGET systems
TRAINING TIME
ff Getting familiar with hydrostatic travel and TRAINING TIME LEARNING TARGET
Tightening
Tightening
systems
systems
winch drives 2 days:
3 days: ff Understanding in detail the interaction between
ff Getting to know components, set-up and function Day 1 9:00 AM – 4:00 PM
Day 1 9:00 AM – 4:00 PM components in load sensing and LUDV controls
ff Remedying simple malfunctions Day 2 8:00 AM – 4:00 PM
Day 2 9:00 AM – 4:00 PM as well as how they work
ff Using the components and controllers safely
Day 3 9:00 AM – 4:00 PM ff Knowing and mastering the technical features of
technology
technology
PRICE
Welding
Welding
this type of control system
PREREQUISITE €989.00 (net) / €1,176.91 (gross)
PRICE ff Recognizing and correcting system and
Completion of the HTAM training course or component faults
€1,438.00 (net) / €1,711.22 (gross) ADVANCED TRAINING COURSES
comparable knowledge ff Learning the limits of use and improving system
Linear motion
Linear motion
and assembly
and assembly
technology
technology
efficiency using practical tips HTM-CP
ADVANCED TRAINING COURSES
TARGET GROUP
HTM-CP PREREQUISITE NOTICE
Operators, service technicians, programmers,
planners/application engineers, managers and Completion of the HTM-OK training course or Participants must bring suitable protective clothing
Pneumatics
Pneumatics
NOTICE to the training course (safety shoes, work clothing).
trainers comparable knowledge
Participants must bring suitable protective clothing
to the training course (safety shoes, work clothing). TARGET GROUP You can find the current offer online at:
www.boschrexroth.com/training
Safety technology
Safety technology
Operators, service technicians, programmers,
You can find the current offer online at: planners/application engineers, managers and
www.boschrexroth.com/training trainers
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-CP HT-FLUIDS-MH
"Experience" mobile hydraulics Hydraulic fluids in mobile applications
New training
New training
courses
courses
eDrive & Control
Academy
components for various applications. Through intensive product training, you basic information on the specific properties of base oils, additives,
you will learn about structure, function and technical features. Take this formulated hydraulic fluids and their standardization. Furthermore, the
opportunity to operate and work on various machines. By testing, application notes and requirements for Rexroth hydraulic components will
hydraulics
hydraulics
Industrial
Industrial
measuring and adjusting, you will find the best settings for the machine, be taught.
as well as be able to recognize and correct system faults.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP
CONTENTS TARGET GROUP
ff Structure and function of systems and components Service technicians, programmers,
for load-dependent and load-compensated systems planners/application engineers, trainers ff Hydraulic fluids as a design element Operators, service technicians, programmers,
with practical layout (DS, LS, LUDV) ff What hydraulic fluids do planners/application engineers, managers and
Automation and
Automation and
DATES (GERMAN) TRAINING
Industry 4.0
Industry 4.0
ff Calibration on selected heavy machinery ff Base fluids trainers
(open-circuit and closed-circuit) LOCATION ff Additives and their effect
ff Measurements on equipment, analysis and ff Oil properties DATES (GERMAN) TRAINING LOCATION
March 23 - March 27, 2020 Walldorf
evaluation of recorded measurements and ff Standardization
March 17, 2020 Elchingen
optimization of settings ff Mineral oils and related hydrocarbons
Electric drives
Electric drives
and controls
and controls
DATE (ENGLISH) TRAINING
ff Identification and correction of faults ff Environmentally friendly hydraulic fluids
LOCATION DATE (ENGLISH) TRAINING LOCATION
ff Flame resistant hydraulic fluids
LEARNING TARGET October 19 - October 23, 2020 Walldorf November 24, 2020 Elchingen
LEARNING TARGET
ff Being able to select suitable components for drive
Tightening
Tightening
Please contact us for more dates and individual Please contact us for more dates and individual
systems
systems
and working hydraulics based on application, Gaining basic knowledge of the development,
training courses. We would be happy to help you. training courses. We would be happy to help you.
deriving from examples of wheel loaders and composition, properties and standardization of
mobile excavators various hydraulic fluids
TRAINING TIME TRAINING TIME
ff Gaining detailed knowledge of the various
technology
technology
components, e.g. use limitation curves and 4.5 days: PREREQUISITE 1 day: 9:00 AM – 4:00 PM
Welding
Welding
calibration options Day 1 9:30 AM – 4:30 PM
Technical understanding
ff Knowing how to measure, analyze recordings and Days 2 to 4 8:00 AM – 4:30 PM PRICE
recognize measuring errors Day 5 8:00 AM – 12:00 PM
€380.00 (net) / €452.20 (gross)
Linear motion
Linear motion
and assembly
and assembly
ff Knowing how to optimize hydraulic systems based
technology
technology
on performance, power distribution and PRICE
NOTICE
controllability
€2,010.00 (net) / €2,391.90 (gross)
You can find the current offer online at:
PREREQUISITE www.boschrexroth.com/training
Pneumatics
Pneumatics
NOTICE
Completion of the HTM-GK, HTM-LS-PR training
Participants must bring suitable protective clothing
courses or comparable knowledge
to the training course (safety shoes, work clothing).
Safety technology
Safety technology
You can find the current offer online at:
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-M4 HTM-M7
M4 Product training M7 Product training
New training
New training
courses
courses
eDrive & Control
Academy
the structure and function of the installed components, details about the structure and function of the installed components, details about
characteristic curves and limits of use as well as the flexibility of the characteristic curves and limits of use as well as the flexibility and technical
M4 toolkit. possibilities of M7.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Basic information on LUDV, set-up and Operators, service technicians, programmers,
CONTENTS TARGET GROUP
function of M7 planners/application engineers, managers and
ff Basic information on LS, set-up and function of M4 Operators, service technicians, programmers, ff Functions of the standard components and trainers
ff Functions of the standard components such as the planners/application engineers, managers and their combination
Automation and
Automation and
DATES (GERMAN) TRAINING LOCATION
Industry 4.0
Industry 4.0
input and end elements as well as the directional trainers ff Often used special solutions
control valve disks ff Combination of LUDV and LS as well as the
January 22, 2020 Elchingen
ff Often used special solutions DATES (GERMAN) TRAINING LOCATION DTS function and gripper circuit
September 3, 2020 Bochum
ff Tips for practice ff Single-circuit and dual-circuit systems
January 21, 2020 Elchingen
ff Energy and cost savings ff Tips for practice
Electric drives
Electric drives
and controls
and controls
September 2, 2020 Bochum Please contact us for more dates and individual
training courses. We would be happy to help you.
LEARNING TARGET LEARNING TARGET
Please contact us for more dates and individual
ff Becoming familiar with the product M4 and the training courses. We would be happy to help you. ff Becoming familiar with the product M7 and the TRAINING TIME
possible applications possible applications
Tightening
Tightening
1 day: 9:00 AM – 4:00 PM
systems
systems
ff Getting to know the components, their functions TRAINING TIME ff Getting to know the components, their functions
and set-up and set-up
1 day: 9:00 AM – 4:00 PM PRICE
ff Possible combinations, configuration ff Possible combinations M/(LUDV+LS) or M7 + M4
ff Recognizing and remedying simple malfunctions ff Recognizing and remedying simple malfunctions €440.00 (net) / €523.60 (gross)
PRICE
technology
technology
Welding
Welding
PREREQUISITE €440.00 (net) / €523.60 (gross) PREREQUISITE NOTICE
Technical understanding Technical understanding Participants must bring suitable protective clothing
NOTICE
to the training course (safety shoes, work clothing).
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Participants must bring suitable protective clothing
to the training course (safety shoes, work clothing). You can find the current offer online at:
www.boschrexroth.com/training
You can find the current offer online at:
Pneumatics
Pneumatics
www.boschrexroth.com/training
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTA1 HTA2
Hydraulics training – Axial piston units A10, A1 Hydraulics training – Axial piston units
New training
New training
courses
courses
A4VSO, A15
eDrive & Control
Academy
A1VO, A10VO, A10VSO, A10VZO, A10VM and their typical controllers. A15VSO, A4VSO, A4VSG, A4CSG, A6VM and their typical controllers.
You will practice disassembly and assembly in theory and practice. You will You will practice disassembly and assembly in theory and practice. You will
also carry out calibration on a selected unit. also carry out calibration on a practice rig.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION LOCATION
ff Open-circuit A1VO, A10V(S)O and motors ff A15VSO, A6VM
ff Controller types DR, DRG, DFR1, DFLR, LAx, March 3 - March 4, 2020 Horb ff A4VSO, VSG and CSG March 5 - March 6, 2020 Horb
ED and EP June 16 - June 17, 2020 Horb ff Controller types DFR, DP, LRx, HS5 without June 18 - June 19, 2020 Horb
ff Disassembly and assembly of an A1VO and electronics and HD/EP
Automation and
Automation and
DATE (ENGLISH) TRAINING DATE (ENGLISH) TRAINING
Industry 4.0
Industry 4.0
an A10VSO ff Disassembly and assembly of an A4VSO and an
ff Calibration of a DFR1 controller LOCATION A6VM LOCATION
November 10 - November 11, 2020 Horb November 12 - November 13, 2020 Horb
LEARNING TARGET LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
ff Gaining knowledge about the mechanical and TRAINING TIME ff Gaining knowledge about the mechanical and TRAINING TIME
hydraulic structure as well as the function and hydraulic structure as well as the function and
2 days: 2 days:
options for using medium-pressure axial options for using high-pressure axial piston units
Day 1 9:00 AM – 4:00 PM Day 1 9:00 AM – 4:00 PM
piston units ff Understanding the components and function of
Day 2 9:00 AM – 4:00 PM Day 2 8:00 AM – 3:00 PM
ff Understanding the components and function of a hydraulic system
Tightening
Tightening
systems
systems
a simple hydraulic system ff Being able to troubleshoot a hydraulic system
PRICE PRICE
ff Being able to troubleshoot a hydraulic system
€849.00 (net) / €1,010.31 (gross) PREREQUISITE €849.00 (net) / €1,010.31 (gross)
PREREQUISITE
Technical understanding
technology
technology
Book the HTA2 training course at the same time and Book the eHTB and/or HTA1 training course at the
Welding
Welding
Technical understanding
receive a discount of €150.00 (net) / €178.50 (gross). same time and receive a discount of
TARGET GROUP
€150.00 (net) / €178.50 (gross).
TARGET GROUP
NOTICE Operators, service technicians, planners/application
Linear motion
Linear motion
and assembly
and assembly
Operators, service technicians, planners/application engineers, trainers NOTICE
technology
technology
The following training courses take place in the same
engineers, trainers
training week: HTA1, HTA2 The following training courses take place in the same
training week: HTA1, HTA2
Participants must bring suitable protective clothing
Pneumatics
Pneumatics
to the training course (safety shoes, work clothing). Participants must bring suitable protective clothing
to the training course (safety shoes, work clothing).
You can find the current offer online at:
www.boschrexroth.com/training You can find the current offer online at:
Safety technology
Safety technology
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HTM-HFKB
Learning path mobile electronics
Hydraulic power brakes
New training
New training
courses
courses
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE SPECIAL TRAINING
operation of Rexroth power brakes for wheeled vehicles. The various
TRAINING
components and their specific properties and advantages will be addressed dd Mobile electronics
hydraulics
Industrial
Industrial
1 2 1
eT-BODAS-BT BODAS Diagnostic Tools eDA eDA-PR
Basic training in BODAS Introduction to BODAS eDA Electronic Drive eDA Practice Day
mobile electronics diagnostic tools and Controller
(eTraining/webinar) CAN standard SAE
J1939
p. 128
Mobile electronics
Mobile electronics
p. 130 p. 131 p. 132
Mobile hydraulics
Mobile hydraulics
2 2 3
EL-Basics BODAS-ASrun-DRC BODAS-drive-DPC
Electronics in mobile BODAS-drive DRC Working with open
applications application software BODAS-design standard
application software for
dual-circuit drive systems
(chain drives)
Automation and
Automation and
p. 129 p. 133 p. 137
Industry 4.0
Industry 4.0
1 3
BODAS-ASrun-AFC BODAS-C-API-BR3x
BODAS-Automatic fan Programming series 3x
control AFC application RCs with C-API
software
Electric drives
Electric drives
and controls
and controls
p. 134 p. 138
Tightening
single-circuit and dual-circuit systems
systems
systems
p. 105 p.
P.135
xx p. 139
ff Design of power brake systems DATES (GERMAN) TRAINING LOCATION
1
ff Information on installation and maintenance BODAS-ASrun-LLC
Dates and training locations available on request LLC BODAS-Load
limiting control
LEARNING TARGET application software
technology
technology
Please contact us for more dates and individual
Welding
Welding
p. 136
ff Knowing legal principles for Germany and Europe training courses. We would be happy to help you.
NEU 1
2
– understanding how the components used work
BODAS-Display-DI4
ff Being able to design and maintain appropriate TRAINING TIME Introduction to the
programming of a DI4 (HMI)
Linear motion
Linear motion
and assembly
and assembly
systems with CODESYS and Rexroth
technology
technology
0.5 days: 8:30 AM – 1:30 PM software package
p. 140
PREREQUISITE
PRICE
Technical understanding
€380.00 (net) / €452.20 (gross)
Pneumatics
Pneumatics
BOSCH COOPERATION PROJECT: SYSTEM
TRAINING FOR OFF-HIGHWAY SPECIALISTS
NEU 3 NEU 4
Safety technology
Safety technology
Bosch-Diesel OHS-MH
Bosch common System training for
rail systems and exhaust Off-highway specialists
gas treatment systems in (mobile hydraulics)
the field of OHW
p. 141 p. 142
@
NEU LW
Energy efficiency
Energy efficiency
@
eT-BODAS-BT EL-Basics
Basic training in BODAS mobile electronics Electronics in mobile applications
New training
New training
New training
courses
courses
courses
eDrive & Control
Academy
Academy
System, in your experiences with Rexroth hydraulic components? Find out electronification of hydraulic applications and systems. You will become
which potential the conjunction of mobile electronics and hydraulics has. familiar with the components used. Furthermore, you will learn how to use
project planning tools and application software.
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
LOCATION
f Requirements for mobile electronics Operators, service engineers, programmers, ff Overview of the BODAS environment
f Structure and function of electronic components: planners/implementers, managers, trainers (BODAS toolkit) February 4 - February 5, 2020 Elchingen
- Control units ff Project planning tools May 5 - May 6, 2020 Bochum
- Sensors, joysticks, displays TRAINING TIME ff Overview of application software September 15 - September 16, 2020 Elchingen
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
Industry 4.0
- Software, tools ff Practical exercises on the topics presented
f Duration: approx. 2 hours
f Introduction to the pin assignments of DATE (ENGLISH) TRAINING
f Training content available 24 hours per day
RC control units LEARNING TARGET LOCATION
f Software functions and options as well as the
AVAILABLE LANGUAGES Knowing the basics of the electronification of March 24 - March 25, 2020 Elchingen
BODAS-design and BODAS-service programming
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
hydraulic systems October 20 - October 21, 2020 Elchingen
tools German, English
Tightening
Tightening
systems
systems
systems
sensors, actuators and control units in mobile TRAINING TIME
TARGET GROUP
electronics Price for multi-user licenses upon request
2 days:
f Understanding how software and software tools Service technicians, programmers, planners/
Day 1 9:00 AM – 4:00 PM
function application engineers, managers, trainers
Day 2 8:00 AM – 4:00 PM
technology
technology
technology
f Knowing about BODAS systems and components
Welding
Welding
Welding
PRICE
PREREQUISITE
€699.00 (net) / €831.81 (gross)
f Technical understanding
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
f PC with Internet access, Flash Player 10 or
ADVANCED TRAINING COURSES
higher: http://get.adobe.com/flashplayer
f Email address for personal login BODAS Diagnostic Tools
Pneumatics
Pneumatics
Pneumatics
NOTICE
Safety technology
Safety technology
You can find the current offer online at:
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
@ @
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
130 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 131
New training
courses
courses
CAN standard SAE J1939
eDrive & Control
Academy
tools for configuring and running diagnostics on BODAS RC control units. practical experience with the components and software control system.
You will receive detailed BODAS-service training and learn the basics of the A drive control will be configured using BODAS-service. You will test your
CAN standard SAE J1939 as well as the corresponding evaluation software. configuration in a test environment.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING LOCATION CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Detailed introduction to using BODAS-service February 6, 2020 Elchingen ff Introduction to the Series 35 A4VG
ff Introduction to the structure of CAN bus and its September 17, 2020 Elchingen ff DA-DA to eDA delta analysis March 3 - March 4, 2020 Elchingen
messages ff Performance limits, ENTRY and September 29 - September 30, 2020 Elchingen
ff Introduction to working with the DATE (ENGLISH) TRAINING LOCATION PREMIUM functions
Automation and
Automation and
DATE (ENGLISH) TRAINING
Industry 4.0
Industry 4.0
VECTOR CANalyzer software ff Introduction to functional safety with
March 26, 2020 Elchingen
ff Practical examples in a test environment for BODAS-drive eDA LOCATION
October 22, 2020 Elchingen
parameterizing the software and interpreting
March 31 - April 1, 2020 Elchingen
diagnostic messages and signals LEARNING TARGET
Please contact us for more dates and individual October 27 - October 28, 2020 Elchingen
Electric drives
Electric drives
and controls
and controls
training courses. We would be happy to help you. ff Knowing the functions of the hydraulic and
LEARNING TARGET
electronic components Please contact us for more dates and individual
ff Being able to use BODAS-service in a targeted TRAINING TIME ff Being able to parameterize an eDA drive using training courses. We would be happy to help you.
manner a specified operation diagram (FADI)
1 day: 8:00 AM – 4:00 PM
ff Understanding CAN messages and being able to TRAINING TIME
Tightening
Tightening
systems
systems
analyze them with VECTOR-CANalyzer PREREQUISITE
PRICE 2 days:
Completion of the BODAS Diagnostic Tools Day 1 9:00 AM – 4:00 PM
PREREQUISITE €440.00 (net) / €523.60 (gross)
training course or comparable knowledge Day 2 8:00 AM – 4:00 PM
Completion of the EL-Basics training course or
technology
technology
ADVANCED TRAINING COURSES
Welding
Welding
comparable knowledge TARGET GROUP PRICE
eDA, BODAS-ASrun-DRC, BODAS-ASrun-AFC,
Service technicians, programmers, planners/ €849.00 (net) / €1,010.31 (gross)
TARGET GROUP BODAS-ASrun-SPC40, BODAS-ASrun-LLC
application engineers, trainers
Linear motion
Linear motion
and assembly
and assembly
Service technicians, programmers, managers, ADVANCED TRAINING COURSES
technology
technology
NOTICE
planners/application engineers, trainers
eDA-PR
The following training courses take place in the same
training week: EL-Basics, BODAS Diagnostic Tools
NOTICE
Pneumatics
Pneumatics
You can find the current offer online at: The following training courses take place in the same
www.boschrexroth.com/training training week: eDA, eDA-PR.
Safety technology
to the training course (safety shoes, work clothing).
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
eDA-PR BODAS-ASrun-DRC
eDA Practice Day BODAS-drive DRC application software
New training
New training
courses
courses
eDrive & Control
Academy
Once a parameters file is created, it will be uploaded to a controller ASrun-DRC drive controller. Following an introduction to the system,
installed in a wheel loader. Operation will then be optimized through you will configure and set parameters for a drive in a test environment.
extensive tests. You will also become familiar with the virtual test environment and the ways
hydraulics
hydraulics
Industrial
Industrial
to evaluate CAN bus signals.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Parameter preconfiguration on a March 5, 2020 Elchingen ff Introduction to the system and its integrated
practice computer October 1, 2020 Elchingen functions
ff Overwriting the parameters file on a controller ff Introduction to functional safety with
ff Adapting parameters to the vehicle DATE (ENGLISH) TRAINING LOCATION BODAS-drive DRC
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Fine-tuning vehicle operation ff Parameterization of the ASrun-DRC43 using
April 2, 2020 Elchingen
BODAS-service and the Guided Commissioning
October 29, 2020 Elchingen
LEARNING TARGET function
ff Practical exercises with BODAS diagnostic tools
ff Being able to create a parameter file on the PC, Please contact us for more dates and individual DATES (GERMAN) TRAINING
in a test environment/on a test carrier
Electric drives
Electric drives
and controls
and controls
establish a connection to a vehicle and training courses. We would be happy to help you. LOCATION
overwriting a parameter file using a maintenance
LEARNING TARGET February 18 - February 19, 2020 Elchingen
notebook TRAINING TIME
ff Knowing how the operating features of a wheel ff Understanding the functions of BODAS-drive
1 day: 8:00 AM – 4:00 PM DATE (ENGLISH) TRAINING
loader can be configured and being able to output DRC and configuring its parameters
Tightening
Tightening
LOCATION
systems
systems
error messages ff Being familiar with the documentation structure
PRICE
and knowing how to use it November 3 - November 4, 2020 Elchingen
PREREQUISITE €510.00 (net) / €606.90 (gross) ff Being able to independently parameterize an
ASrun-DRC43 Please contact us for more dates and individual
Completion of the eDA training course or comparable
technology
technology
NOTICE training courses. We would be happy to help you.
Welding
Welding
knowledge
PREREQUISITE
The following training courses take place in the same
TRAINING TIME
TARGET GROUP training week: eDA, eDA-PR. ff Completion of the EL-Basics training course or
comparable knowledge 2 days:
Linear motion
Linear motion
and assembly
and assembly
Service technicians, programmers,
technology
technology
Participants must bring suitable protective clothing ff Completion of the BODAS Diagnostic Tools Day 1 9:00 AM – 4:30 PM
planners/application engineers, trainers
to the training course (safety shoes, work clothing). training course or comparable knowledge Day 2 8:00 AM – 4:00 PM
You can find the current offer online at: TARGET GROUP PRICE
Pneumatics
Pneumatics
www.boschrexroth.com/training
Service technicians, programmers, €849.00 (net) / €1,010.31 (gross)
planners/application engineers, trainers
NOTICE
Safety technology
Safety technology
The following training courses take place in the same
training week: BODAS-ASrun-AFC, BODAS-ASrun-DRC
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
BODAS-ASrun-AFC BODAS-ASrun-SPC40
BODAS-Automatic SPC40 BODAS-Speed
New training
New training
courses
courses
fan control AFC application software control application software
eDrive & Control
Academy
software AS. Now, you will configure, parameterize and commission a fan hydrostatic drives with variable hydraulic pumps. SPC40 is designed for
drive in a hydraulic training system and learn about the various control speed regulation of a drive in an open or closed hydraulic circuit. You are
options with Rexroth BODAS-Fan Control AFC. already familiar with the concept of the BODAS standard application
hydraulics
hydraulics
Industrial
Industrial
software AS. Now you will be able to configure and parameterize speed
regulation in a test environment and learn about the various control options
CONTENTS TARGET GROUP with Rexroth BODAS-Speed Control SPC.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Configuring relevant CAN communication for the Service technicians, programmers,
fan control system planners/application engineers, trainers
ff Parameterization of the ASrun-AFC with
CONTENTS TARGET GROUP
BODAS-service DATES (GERMAN) TRAINING LOCATION
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Practical exercises with BODAS-service or on ff Introduction of the relevant documents and tools Service technicians, programmers,
February 20, 2020 Elchingen
a test carrier which are required for the systematic integration planners/application engineers, trainers
ff BODAS-service diagnostic messages of BODAS-ASrun-SPC in the work machine
DATE (ENGLISH) TRAINING LOCATION
ff Configuring more relevant CAN communication for DATE (GERMAN/ENGLISH) TRAINING LOCATION
LEARNING TARGET November 5, 2020 Elchingen speed regulation
Electric drives
Electric drives
and controls
and controls
Dates and training locations available on request
ff Parameterization of the ASrun-SPC40 with
ff Being able to independently parameterize an
Please contact us for more dates and individual BODAS-service
ASrun-AFC31 with BODAS-service TRAINING TIME
training courses. We would be happy to help you. ff Practical exercises with BODAS-service in a test
ff Understanding the functions of BODAS-Fan
environment/on a test carrier 0.5 days: 1:00 PM – 4:30 PM
Control AFC and configuring its parameters
Tightening
Tightening
TRAINING TIME ff BODAS-service diagnostic messages
systems
systems
PRICE
PREREQUISITE 1 day: 9:00 AM – 4:00 PM
LEARNING TARGET
€190.00 (net) / €226.10 (gross)
Completion of the BODAS Diagnostic Tools
PRICE ff Understanding the functions of BODAS-Speed
training course or comparable knowledge
technology
technology
Control SPC NOTICE
Welding
Welding
€440.00 (net) / €523.60 (gross)
ff Being able to independently parameterize the
You can find the current offer online at:
ASrun-SPC40 with BODAS-service
NOTICE www.boschrexroth.com/training
Linear motion
Linear motion
and assembly
and assembly
The following training courses take place in the same PREREQUISITE
technology
technology
training week: BODAS-ASrun-DRC, BODAS-ASrun-AFC.
Completion of the BODAS Diagnostic Tools training
course or comparable knowledge
You can find the current offer online at:
www.boschrexroth.com/training
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
BODAS-ASrun-LLC BODAS-drive-DPC
LLC BODAS-Load Working with open BODAS-design standard application
New training
New training
courses
courses
limiting control application software software for dual-circuit drive systems (chain drives)
eDrive & Control
Academy
limits to protect the drive motor from overloading. If the required total power application software for two-circuit drives. Then, you will develop and
of the consumer and the pump exceeds the dimensions of the combustion integrate project-specific adjustments.
engine, protection is realized by means of a configurable load distribution.
hydraulics
hydraulics
Industrial
Industrial
You are already familiar with the concept of the BODAS standard application
software AS. Now you will be able to configure and parameterize a hydraulic
system in a test environment and learn about the various control options with CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
BODAS-Load Limiting Control ASrun-LLC. ff System overview and electrical circuit diagram Programmers
ff Overview of program functions
ff Examples of a safety concept and SISTEMA DATE (ENGLISH) TRAINING LOCATION
calculations
CONTENTS TARGET GROUP May 26 - May 28, 2020 Elchingen
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Inputs, outputs and CAN communication
ff Parameterization of the ASrun-LLC with Service technicians, programmers,
Please contact us for more dates and individual
BODAS-service planners/application engineers, trainers LEARNING TARGET
training courses. We would be happy to help you.
ff Practical exercises with BODAS-service in a test
ff Understanding how to start a project based on
environment/on a test carrier DATE (GERMAN/ENGLISH) TRAINING LOCATION
Electric drives
Electric drives
and controls
and controls
BODAS-drive DPC TRAINING TIME
ff BODAS-service diagnostic messages
Dates and training locations available on request ff Being able to create a project-specific safety
3 days:
concept for a safety function based on an example
LEARNING TARGET Days 1 and 2 9:00 AM – 4:00 PM
TRAINING TIME ff Gaining knowledge of the parts of the program,
Day 3 9:00 AM – 2:00 PM
ff Being able to independently parameterize the parameters and the virtual test box
Tightening
Tightening
1 day: 9:00 AM – 4:00 PM
systems
systems
ASrun-LLC with BODAS-service ff Being able to independently make project-specific
PRICE
ff Understanding the functions of BODAS-Load software modifications in a project
PRICE
Limiting Control and how to configure its €1,438.00 (net) / €1,711.22 (gross)
parameters €380.00 (net) / €452.20 (gross) PREREQUISITE
technology
technology
NOTICE
Welding
Welding
ff Completion of the BODAS-d-BR3x training course
PREREQUISITE NOTICE
or comparable knowledge You can find the current offer online at:
Completion of the BODAS Diagnostic Tools You can find the current offer online at: ff Basic knowledge of functional safety, e.g., www.boschrexroth.com/training
training course or comparable knowledge www.boschrexroth.com/training ISO 13849 or comparable knowledge
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Basic knowledge of hydraulic pumps and motors
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
BODAS-C-API-BR3x BODAS-d-BR3x
Programming series 3x RCs with C-API Programming series 3x RCs with
New training
New training
courses
courses
BODAS-design
eDrive & Control
Academy
BODAS RC control units. Learn how to effectively use the software and of functions and connection options. Learn how to effectively use the
hardware features and implement individual requirements with C-API. software and hardware features and implement your individual
requirements with BODAS-design.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Knowing and defining different input/output uses Programmers, planners/application engineers ff Knowing and defining different input/output uses Programmers
and configurations and configurations
ff Programming with C-API based on the sample DATE (ENGLISH) TRAINING ff Using task management and follow-up functions DATE (GERMAN/ENGLISH) TRAINING LOCATION
application LOCATION ff Working practically on a training set-up
Dates and training locations available on request
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Knowing and using control system safety functions ff Creating a project-specific diagnosis interface for
May 5 - May 7, 2020 Elchingen
ff Creating a project-specific diagnosis interface for BODAS-service
November 10 - November 12, 2020 Elchingen Please contact us for more dates and individual
BODAS-service
training courses. We would be happy to help you.
LEARNING TARGET
Please contact us for more dates and individual
LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
training courses. We would be happy to help you. ff Knowing how to access the peripherals of TRAINING TIME
ff Knowing how to access the peripherals of BODAS BODAS RC control units and use the
3 days:
RC control units and use the controller-specific TRAINING TIME controller-specific system functions
Days 1 to 3 9:00 AM – 4:00 PM
system functions ff Knowing the I/Os of the controller family
3 days:
ff Knowing the I/Os of the controller family ff Being able to program using BODAS-design
Tightening
Tightening
Days 1 and 2 9:00 AM – 4:00 PM PRICE
systems
systems
ff Being able to use EEPROM to permanently templates
Day 3 9:00 AM – 2:00 PM
store data ff Being able to use safety functions €1,438.00 (net) / €1,711.22 (gross)
ff Knowing how to use the four CAN buses
PRICE
PREREQUISITE NOTICE
technology
technology
PREREQUISITE €1,438.00 (net) / €1,711.22 (gross)
Welding
Welding
ff Completion of basic training for CODESYS at You can find the current offer online at:
ff Experience with the C programming language 3S Smart Software Solutions or several years of www.boschrexroth.com/training
NOTICE
ff Completion of the EL-Basics training course is an programming experience
advantage You can find the current offer online at: ff Completion of the EL-Basics training course is an
Linear motion
Linear motion
and assembly
and assembly
technology
technology
www.boschrexroth.com/training advantage
ff Knowledge of another IEC 61131-3 programming
tool and/or good programming knowledge with
C is an advantage
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
BODAS-Display-DI4 Bosch-Diesel
Introduction to the programming of a DI4 (HMI) Bosch common rail systems and exhaust gas
New training
New training
courses
courses
with CODESYS and Rexroth software package treatment systems in the field of OHW
eDrive & Control
Academy
the CODESYS 3.5 development platform. Learn how to effectively use the exhaust gas treatment systems and the newest technology of Bosch
DI4's software and hardware features and implement individual common rail systems in the field of OHW. The different components and
requirements with CODESYS and the Rexroth software package. their interaction will be explained. The training focuses on SCR and common
hydraulics
hydraulics
Industrial
Industrial
After a short introduction to the many opportunities offered, you will apply rail systems of emission class "Tier 4".
what you have learned in practical exercises.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP CONTENTS PREREQUISITE
ff Overview of available tools, documentation and Programmers, planners/application engineers ff Exhaust gas treatment: Basic knowledge of diesel injection systems
accessories -- Exhaust gases and laws
ff From the delivery state to the latest software DATES (GERMAN) TRAINING -- Basics of exhaust gas treatment TARGET GROUP
Automation and
Automation and
LOCATION
Industry 4.0
Industry 4.0
version -- Particle filters and interaction with EDC,
Personnel involved in planning, operation,
ff Practical exercises – Creating a new project with exhaust gas recirculation
April 21 - April 22, 2020 Elchingen maintenance and assembly as well as design
various pages, elements, properties, etc. -- Structure and function of SCR systems such as
engineers of OHW machines
ff Demonstration of the integrated BODAS-service DNOX1, 2.1, 2.2, and 6-HD
DATE (ENGLISH) TRAINING
functionality in a CAN bus network with -- Testing of SCR systems using diagnostic
Electric drives
Electric drives
and controls
and controls
LOCATION DATES (GERMAN) TRAINING
connected BODAS RC controllers testers and hydraulics
LOCATION
ff Using the integrated inputs and outputs November 24 - November 25, 2020 Elchingen ff Common rail diesel injection technology:
ff CAN communication -- Basic information, set-up and function of February 18 - February 20, 2020 Plochingen
Please contact us for more dates and individual common rail systems September 7 - September 9, 2020 Plochingen
Tightening
Tightening
LEARNING TARGET training courses. We would be happy to help you. -- Function and set-up of HD pumps, injectors,
systems
systems
Please contact us for more dates and individual
sensors and actuators
Knowing how the included demo application works training courses. We would be happy to help you.
TRAINING TIME -- Diagnostics on the vehicle using KTS Truck,
oscilloscope
PREREQUISITE 2 days: TRAINING TIME
-- Testing of the diesel hydraulics on the
technology
technology
Days 1 and 2 9:00 AM – 4:00 PM
Welding
Welding
ff Understanding the basics of working with a DI4, low-pressure and high-pressure side 3 days:
CODESYS and the Rexroth software package Day 1 8:30 AM – 4:30 PM
PRICE
ff Completion of the EL-Basics training course or LEARNING TARGET Day 2 8:30 AM – 4:00 PM
comparable knowledge €849.00 (net) / €1,010.31 (gross) Day 3 8:30 AM – 4:30 PM
Linear motion
Linear motion
and assembly
and assembly
ff Using modern common rail diesel and exhaust gas
technology
technology
treatment systems safely
NOTICE PRICE
ff Getting to know components, set-up and function
You can find the current offer online at: of the various components €813.00 (net) / €967.47 (gross)
www.boschrexroth.com/training ff Using the diagnostic tool for testing current
Pneumatics
Pneumatics
systems safely ADVANCED TRAINING COURSES
ff Systematic troubleshooting and application of the
www.automotive-campus.com
KTS Truck diagnostics on agricultural and
construction machinery
Safety technology
Safety technology
NOTICE
Energy efficiency
@ @
OHS-MH
System training for off-highway specialists Ready for the future!
New training
New training
courses
courses
(mobile hydraulics)
Individual training 2020
eDrive & Control
Academy
basics of mobile hydraulics and how to thoroughly analyze and check
electro-hydraulic systems in mobile machinery using various software
applications. In this training course, you will not only learn how to apply the
hydraulics
hydraulics
Industrial
Industrial
Bosch KTS Truck diagnostics but also about conventional diagnostic
methods for hydraulic systems.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP
Automation and
LOCATION
Industry 4.0
Industry 4.0
ff Basic principles of mobile electronics
ff Practical exercises on a test carrier (wheel loader)
February 24 - February 27, 2020 Elchingen
ff Troubleshooting on current mobile hydraulic
October 5 - October 8, 2020 Elchingen
systems for practical use in field repair
ff Application of KTS Truck diagnostics for
Electric drives
and controls
drives and
controls
Electric
diagnosing vehicle components
training courses. We would be happy to help you.
LEARNING TARGET
TRAINING TIME
ff Being able to understand the basic principles of
Tightening
Tightening
4 days:
systems
systems
mobile hydraulics and mobile electronics and
Days 1 to 4 9:00 AM – 4:00 PM
assess the status of an electronically controlled
hydraulic system in a mobile machine
PRICE
ff Knowing the components of an electronically
technology
technology
controlled hydrostatic drive €1,575.00 (net) / €1,874.25 (gross)
Welding
Welding
PREREQUISITE NOTICE
assembly tech-
Linear motion
and assembly
technology
technology and exhaust gas treatment systems in to the training course (safety shoes, work clothing).
nology
construction and agricultural machines
You can find the current offer online at:
www.boschrexroth.com/training
Pneumatics
Pneumatics
Mobile hydraulics and
Safety technology
Safety technology
NEU
@
LW mobile electronics
Energy efficiency
efficiency
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
144 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 145
New training
courses
courses
tomorrow. in individual training
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
Alongside our training program’s standard training courses, which we BASIC
can also conduct directly at your company if required, we offer individual
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
training courses for the qualification of your employees.
We at Bosch Rexroth trust in a module concept. TOPICS For the introduction to your individual training,
Automation and
Automation and
It allows you to define main topics, connect mobile we recommend some basics that will prepare your
Industry 4.0
Industry 4.0
The modules are divided into four topics that offer
hydraulics with electronics in the training course and crew for the contents in a target-oriented way and
a variety of possibilities for compiling your
prepare your team specifically for the tasks of the refresh their basic knowledge. We value variety. It is
individual training.
future. also the basis for motivation and agility when
creating training courses.
Electric drives
Electric drives
and controls
and controls
Together we will work on your success and develop BASIC SYSTEMS
the right training program for your needs. You will
MOBILE HYDRAULICS
profit from many years of know-how and qualified PRODUCTS TOOLS
trainers who are particularly interested in the 101 Basic principles of hydraulics
targeted training of your employees.
Tightening
Tightening
Function and structure of hydraulic systems
systems
systems
In the following, we will introduce you to the
modules of the four topics in the area of mobile
102 Accessories, hose, tank, cooler, filter
hydraulics and mobile electronics.
Accessories for hydraulics and correct handling
technology
technology
Welding
Welding
103 Initial commissioning
Safety when commissioning hydraulic systems
Linear motion
Linear motion
and assembly
and assembly
technology
technology
MOBILE ELECTRONICS
Pneumatics
402 CAN protocol SAE-J1939
Basics of the CAN protocol SAE-J1939-71
Safety technology
Basics of the CAN protocol CANopen
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
146 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 147
New training
courses
courses
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
PRODUCTS PRODUCTS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
The product range of Bosch Rexroth in the field of The A series reflects the product range of the
Automation and
Automation and
mobile hydraulics and mobile electronics extends far axial piston units. This includes pumps and motors
Industry 4.0
Industry 4.0
beyond pumps, motors and control blocks. Discover for open and closed circuits as well as for
the variety of variants and models. By this, single-circuit and multiple-circuit systems.
we provide you with a solid foundation for increasing
your competitiveness in the market of the future.
Electric drives
and controls
drives and
controls
Electric
MOBILE HYDRAULICS MOBILE HYDRAULICS
Tightening
Hydraulic fluids, properties and standardizations Axial piston units
systems
systems
220 M series 206 A1VO Variable displacement pump: Economical load sensing
Control blocks 207 A2FM Universally usable high-pressure motor up to 450 bar
208 A4VG High-pressure pump for applications in closed circuits
technology
technology
Welding
Welding
221 MO/RCS Open center control block, sizes 16–25 209 A4VSO Variable displacement pump for hydrostatic drives in open circuits
222 M8/RCS Open center control block, size 32 210 A6VM Axial piston displacement motor: High speeds
223 M9/RCS Open center control block, sizes 30 and 35 211 A7VO Robust high-pressure pump up to 400 bar in open circuits
224 M7/RS LUDV control block, sizes 20–25 212 A8VO Variable displacement double pump for machines with
Linear motion
Linear motion
and assembly
and assembly
technology
technology
225 M6/RS LUDV control block, sizes 15–22 multiple-circuit systems, e.g. excavators
226 M4 Load sensing control block, sizes 12, 15 and 22 213 A10VG Medium-pressure pump for applications in closed circuits
214 A10VO Universal medium-pressure pump up to 280 bar in open circuits
203 SBX4 215 A11VO Universal high-pressure pump with drive shaft up to 400 bar
Pneumatics
Pneumatics
Structure and function of load sensing control blocks 216 A15VSO Universal high-pressure pump with drive shaft up to 420 bar
217 A18VO High-pressure pump for application in commercial vehicles
204 LT
Hydraulic power brakes
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
148 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 149
New training
courses
courses
Goal-oriented.
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
PRODUCTS SYSTEMS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Even in mobile hydraulics, Bosch Rexroth supports Detailed knowledge of the basics and procedures
Automation and
Automation and
you as a strong partner with promising solutions for during the work process in the machine as well as
Industry 4.0
Industry 4.0
the use in mobile hydraulics. Our training courses their components is required in order to use our
help you to exploit all possibilities and benefit from products even more efficiently. Lay the foundation for
our know-how in the long term. this in your team now.
Electric drives
Electric drives
and controls
and controls
MOBILE ELECTRONICS MOBILE HYDRAULICS
Tightening
Requirements and functions of mobile controllers Open center mobile hydraulics circuit
systems
systems
602 Rexroth sensors 302 OK LUDV
Structure and function of the Rexroth sensor family Open hydraulic circuit with LUDV
technology
technology
Welding
Welding
603 Rexroth IoT (COS) 303 OK LS
Connected Off-Highway Solution (COS) Open hydraulic circuit with load sensing
Linear motion
and assembly
and assembly
technology
technology
Closed circuit for travel drives
305 GK winch
Closed circuit on the example of winch drives
Pneumatics
Pneumatics
306 GK slewing gear
Closed circuit for slewing gears
Safety technology
Safety technology
307 Applications such as wheel loaders, excavators, etc.
Practice module – mobile hydraulics applications
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
150 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 151
Together for your success. Ready for the future with competence
New training
New training
courses
courses
and know-how.
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
TOOLS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
It requires various tools that support the control of Now, compile your own training course from the Do you have any questions about the system or the
Automation and
Automation and
Rexroth components and ensure optimal utilization available modules. We ensure a balanced ratio of preparation for your training? Please do not hesitate
Industry 4.0
Industry 4.0
and efficiency in order to be able to connect mobile theory and practice within each module. to contact us. We are happy to assist you with the
hydraulics with electronics. selection of suitable training modules and time
scheduling.
Electric drives
Electric drives
and controls
and controls
FOR MORE INFORMATION,
MOBILE ELECTRONICS
SEE OUR WEBSITE AT:
501 BODAS-service V3.62 www.boschrexroth.com/training
Tightening
Tightening
Introduction to using and applying the diagnostic tool for the Or contact us by email:
systems
systems
Bosch Rexroth controller of the 2x and 3x series training.elchingen@boschrexroth.de
502 BODAS-service V4
Introduction to using and applying the diagnostic tool for the
technology
technology
Welding
Welding
Bosch Rexroth controller of the 40 series
Linear motion
and assembly
and assembly
technology
technology
distributed systems
Pneumatics
procedures
Safety technology
506 GetreadyforBR40
Prerequisites for programming the Bosch Rexroth controller of the
40 series
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
152 Mobile hydraulics/mobile electronics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Mobile hydraulics/mobile electronics 153
New training
courses
courses
in a customer-specific context
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
On the following pages, you will find examples for the compilation of an
individual training tailored to your needs.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
The given examples focus on various situations from
1 2 3
Automation and
Automation and
your everyday working life in which you as an
Industry 4.0
Industry 4.0
entrepreneur can rely on the support of
Bosch Rexroth.
You would like to use a new Rexroth product Do you have several devices from different You acquired a new machine (e.g. a wheel
but do not have any experience with it? manufacturers and would you like to train loader) and would like to train your team
Electric drives
Electric drives
and controls
and controls
In this case, you may compile the topics for your maintenance personnel? accordingly?
BASIC SYSTEMS
the training course as follows: In this case, you may compile the topics as In this case, you may compile the topics as
follows: follows:
PRODUCTS TOOLS
Module 101 Basic principles of hydraulics
Module 101 Basic principles of hydraulics Module 101 Basic principles of hydraulics
Tightening
Tightening
systems
systems
Module 215 Pumps and motors: A11VO Module 307 Applications such as wheel Module 307 Application of the wheel
loaders, excavators, etc. loader: Travel drive and
This way, you would concentrate entirely on the Module 203 SBX4 working hydraulics
possibilities of the product and deal with the Module 205 Pumps and motors: A series
technology
technology
Welding
Welding
technical data as well as the control program. Module 225 M6/RS
Module 303 OK LS Module 208 A4VG
Module 304 GK travel drive Module 210 A6VM
Module 305 GK winch Module 214 A10VO
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Module 401 CAN basics Module 304 GK travel drive
Module 402 CAN protocol SAE-J1939 Module 302 OK LUDV
Module 503 CANalyzer basics
The training is performed exactly according to
Pneumatics
Pneumatics
Module 103 Initial commissioning the material number. This means, that the
focus of your training is on the components
The focus of the training is on troubleshooting, that are actually installed in your machines.
Safety technology
Safety technology
system understanding and measuring This way, we are also able to tailor trainings to
Are you interested and would you like to
possibilities. Simple maintenance services and special solutions (only for OEMs!).
exchange views on the elaboration of the
the correct commissioning after exchanging
training plan for your crew with a trainer team?
the components complement the training
Contact us by email:
contents.
training.elchingen@boschrexroth.de
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
Linear motion
and assembly Welding Tightening Electric drives Automation and Mobile hydraulics Industrial eDrive & Control New training
Energy efficiency Safety technology Pneumatics technology technology systems and controls Industry 4.0 Mobile electronics hydraulics Academy courses
154
Notes
Mobile hydraulics/mobile electronics
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
eDrive & Control
Academy
Commissioning engineers IT specialists Plant managers
Developers/design
Mechanical engineers Commissioning Proprietors
eLearning engineers
Electricians engineers Buyers
Technical sales
hydraulics
Industrial
Industrial
Understanding and Experiencing i4.0 in Production
Mobile electronics
Mobile hydraulics
Mobile hydraulics
162 ATP-i4.0 Converting production from Industry 3.0 to Industry 4.0 ● ● ● ● ●
163 ATP-i4.0cpt Industry 4.0 in practice (compact course) – Technical add-on for i4.0 beginners ● ● ● ●
NEW 166 AT-IoT-Sens-Basic Technical introduction to the IoT sensor technology for factories of the future ● ● ● ●
Automation and
Automation and
Industry 4.0
Industry 4.0
NEW 167 AT-IoT-Sens-Hack Connected sensor devices – Hackathon ●
SOFTWARE SOLUTIONS
ActiveCockpit
Electric drives
Electric drives
and controls
and controls
169 MOT-Prod-i4.0 Visualization of process data ● ● ●
Tightening
171 EST-XLC/MLC-OCI-EASY Introduction to open core interface ● ●
systems
systems
172 EST-XLC/MLC-OCI-WIN Windows programming with open core interface ● ●
technology
Welding
Welding
176 HTP-IAC-HMC1 VT-HMC Hydraulic axis controller/IAC multi-ethernet valve ● ● ● ●
178 HTP-HMC2 Motion control for hydraulics – Programming the VT-HMC motion controller ● ● ● ●
Linear motion
and assembly
and assembly
technology
technology
Data Analysis and Production
NEW 166 AT-IoT-Sens-Basic Technical introduction to the IoT sensor technology for factories of the future ● ● ● ●
Pneumatics
FIELD EQUIPMENT
CNC (IndraMotion MTX) with Industry 4.0 Software Expansion
Safety technology
NEW 180 HTP-CytroPac Commissioning CytroPac ● ● ●
Energy efficiency
187 Industry consulting – From lean management to Industry 4.0
Learning path
New training
New training
courses
courses
eDrive & Control
Academy
FUNDAMENTALS AND OVERVIEW SOFTWARE SOLUTIONS
hydraulics
Industrial
Industrial
5 2
ATP-1 EST-XLC/MLC-OCI-EASY
Basic knowledge Introduction to open
of automation with core interface
practical exercises 2
ESTG-OCI
Mobile electronics
Mobile electronics
p. 160 p. 171
Mobile hydraulics
Mobile hydraulics
Basics of open
core engineering
1 5 2 3
AT-i4.0 ATP-i4.01) ATP-i4.0cpt EST-XLC/MLC-OCI-WIN
p. 170
Understanding Converting production Industry 4.0 in practice Windows programming
Industry 4.0 from Industry 3.0 to (compact course) – with open core
Industry 4.0 Technical add-on for 1) T
he first day of the ATP-i4.0 training interface
i4.0 beginners course corresponds to the contents
Automation and
Automation and
p. 161 p. 162 p. 163 of the AT-i4.0 training course. p. 172
Industry 4.0
Industry 4.0
NEU 1 NEU 4
AT-IoT-Sens-Basic AT-IoT-Sens-Hack dd Motion Control for Hydraulics
Technical introduction Connected sensor
to the IoT sensor devices – Hackathon
technology for factories 3 3 2
of the future
Electric drives
Electric drives
HED-G HTP-IAC-HMC1 HTP-HMC2
and controls
and controls
p. 166 p. 167
Hydraulics – VT-HMC Hydraulic Motion control for
Electrification and axis controller/IAC hydraulics programming
NEU 2 digitization – Basics multi-ethernet valve the VT-HMC motion
EST-IoT-Gateway controller
Application of the IoT p. 174 p. 176 p. 178
gateway
Tightening
Tightening
systems
systems
p. 168
technology
SOFTWARE SOLUTIONS
Welding
Welding
NEU 1 NEU 4
dd ActiveCockpit
AT-IoT-Sens-Basic AT-IoT-Sens-Hack
Technical introduction Connected sensor
to the IoT sensor devices – Hackathon
1 technology for factories
Linear motion
Linear motion
and assembly
and assembly
technology
technology
MOT-Prod-i4.0 of the future
Visualization of p. 166 p. 167
process data
p. 169
Pneumatics
Pneumatics
FIELD EQUIPMENT
Safety technology
3 NEU 2
EST-MTX-EWB HTP-CytroPac
MTX Efficiency Commissioning
workbench CytroPac
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ p. 179 p. 180 @
ATP-1 AT-i4.0
Basic knowledge of automation with Understanding Industry 4.0
New training
New training
courses
courses
practical exercises
eDrive & Control
Academy
today's machines and their processes. The future prospect of intelligent represents the way forward and offers exciting opportunities for those who
factories requires profound knowledge in the field of automation. The possess the expertise and vision to quickly realize these possibilities.
foundation for this will be laid using practical examples in this introduction. Our training provides you with a solid introduction to the world of Industry
hydraulics
hydraulics
Industrial
Industrial
4.0 – and uses many sample applications and the necessary vision to
ensure you have the i4.0 knowledge you need.
CONTENTS PREREQUISITE
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Introduction to automation technology Basic knowledge in the fields of pneumatics, The learning contents of this training course correspond to Module 1
ff PLC programming according to IEC 61131-3 mechanics, electrical engineering and network of the CCI certificate course "Industry 4.0 Specialist (CCI)".
ff How automation systems work technology
ff Basics of electricity
CONTENTS DATES (GERMAN) TRAINING LOCATION
Automation and
Automation and
TARGET GROUP
Industry 4.0
Industry 4.0
ff Measurement of current, voltage and resistance
ff Reading electrical schematics ff General introduction to the topic May 4, 2020 Würzburg
Operators, service technicians, planners/application
ff Basic pneumatic and hydraulic principles -- Where the term "Industry 4.0" comes from and October 12, 2020 Würzburg
engineers and trainers
ff Field bus systems, overview and application what's behind it
ff Network technology, overview and application -- Explanation of important concepts DATE (ENGLISH) TRAINING LOCATION
Electric drives
Electric drives
and controls
and controls
DATES (GERMAN) TRAINING LOCATION
ff Practical exercises ff Industry 4.0 at Bosch and Bosch Rexroth
April 20, 2020 Würzburg
June 22 - June 26, 2020 Würzburg ff Best practice
LEARNING TARGET
TRAINING TIME
TRAINING TIME LEARNING TARGET
ff Principles of automation technology
Tightening
Tightening
1 day: 10:00 AM – 5:00 PM
systems
systems
ff Being able to network electrical, pneumatic and 5 days: ff Gain a clear understanding of Industry 4.0
hydraulic components to automation controls Day 1 10:00 AM – 4:15 PM ff Being able to define the Internet of Things and
PRICE
ff Know the operation and signals from sensors Days 2 to 4 8:00 AM – 4:15 PM classify solutions
and implement them in the context of automation Day 5 8:00 AM – 12:30 PM ff Know what Bosch and Bosch Rexroth are doing in €573.00 (net) / €681.87 (gross)
technology
technology
technology the field of Industry 4.0
Welding
Welding
ff Having an overview of field buses and learning to PRICE ADVANCED TRAINING COURSES
implement them inside the machine PREREQUISITE
€2,093.00 (net) / €2,490.67 (gross) ATP-i4.0
ff Program manual and automatic processes
ff Good technical understanding
Linear motion
Linear motion
and assembly
and assembly
according to IEC 61131-3 PLC
technology
technology
ADVANCED TRAINING COURSES ff Basic knowledge of automation and NOTICE
ff Apply protective and diagnostic functions in the
control technology
programming ATP-i4.0 For full details of our growing offering, visit:
ff Understand the basics of network technology https://www.boschrexroth.com/en/xc/training/
TARGET GROUP
based on Ethernet trends-and-topics/trends-and-topics-1
Pneumatics
Pneumatics
Operators, service technicians, programmers,
planners/application engineers, managers and
trainers
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
ATP-i4.0 ATP-i4.0cpt
Converting production from Industry 4.0 in practice (compact course) –
New training
New training
courses
courses
Industry 3.0 to Industry 4.0 Technical add-on for i4.0 beginners
eDrive & Control
Academy
What does it look like in reality? And how can it be implemented? What does it look like in reality? And how can it be implemented?
This training course offers answers and suggestions. After a thorough This training course offers answers and suggestions. Step by step,
introduction to Industry 4.0, the options for expanding a classic production the possibilities to expand a classic production line are presented and put
hydraulics
hydraulics
Industrial
Industrial
line are described step by step and practically implemented. into practice.
The learning contents of this training course correspond to modules 1 The learning contents of this training course correspond to module 3
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
and 3 of the CCI certificate course "Industry 4.0 Specialist (CCI)". of the CCI certificate course "Industry 4.0 Specialist (CCI)".
Automation and
ff Introduction to Industry 4.0 Operators, service technicians, planners/application
Industry 4.0
Industry 4.0
ff Basics of Ethernet and communication May 25 - May 26, 2020 Würzburg
ff Step-by-step upgrading of a training system engineers, managers and trainers
ff Introduction to RFID and IO-Link October 1 - October 2, 2020 Würzburg
ff Data capture using intelligent components
ff Introduction to the following topics with live
ff Data collection via an IoT gateway DATES (GERMAN) TRAINING
LOCATION demonstration: TRAINING TIME
ff Connecting data to databases
-- Ways to expand automated manufacturing
Electric drives
Electric drives
and controls
and controls
ff Analyzing the data and possibilities for sending May 4 - May 8, 2020 Würzburg 2 days:
-- Data collection, storage and analysis
alerts October 12 - October 16, 2020 Würzburg Day 1 10:00 AM – 4:30 PM
ff Visualization of data Day 2 8:30 AM – 4:00 PM
LEARNING TARGET
DATE (ENGLISH) TRAINING
LEARNING TARGET LOCATION ff See contents PRICE
Tightening
Tightening
systems
systems
ff Gaining a clear understanding of Industry 4.0 April 20 - April 24, 2020 Würzburg €827.00 (net) / €984.13 (gross)
ff Knowing how to expand an industrial plant PREREQUISITE
ff Identifying data sources TRAINING TIME
ff Good technical understanding NOTICE
ff Recognizing and implementing ways of data
5 days: ff Basic knowledge of automation and control
technology
technology
acquisition The training contents are similar to those from the
Welding
Welding
Day 1 10:00 AM – 5:00 PM technology
ff Knowing the possibilities of connection to ATP-i4.0 training course but are optimized for sales
Days 2 to 4 8:00 AM – 4:00 PM ff Completion of the AT-i4.0 training course or
databases requirements.
Day 5 8:00 AM – 12:30 PM comparable knowledge
ff Knowing the possibilities of analyzing databases
ff Knowing the possibilities of alerting
Linear motion
Linear motion
and assembly
and assembly
PRICE
technology
technology
ff Knowing how to visualize data TARGET GROUP
€2,093.00 (net) / €2,490.67 (gross)
Service technicians, programmers,
PREREQUISITE
NOTICE planners/application engineers, managers
ff Knowledge of PLC programming according to
ff For full details of our growing offering, visit:
Pneumatics
Pneumatics
IEC 61131-3
ff Excellent technical understanding https://www.boschrexroth.com/en/xc/training/
ff Basic knowledge of automation and trends-and-topics/trends-and-topics-1
control technology ff The first day of the ATP-i4.0 training course
Safety technology
Safety technology
corresponds to the AT-i4.0 training course.
ff Our Service department would be happy to assist
you in upgrading your existing equipment to
Industry 4.0.
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
factories of the future Industrial portfolio of
eDrive & Control
Academy
For further information, please go to: https://www.bosch-connectivity.com/products/
hydraulics
hydraulics
Industrial
Industrial
Sensor-based connected devices lay the foundation This also includes wired solutions as well as
for the Internet of Things and offer unlimited wireless, battery-operated variants with Cross Domain Development Kit | XDK
possibilities for designing the factory of the future. a particularly efficient energy management. Your "Swiss army knife" for the Internet of Things. The XDK offers eight
different sensors, various integrated connectivities, the possibility of flexible
The product portfolio ranges from multi-functional expansion and free programmability. XDK is certified for 24/7 usage, giving
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Monitoring industrial plants, machines and processes devices to specialized devices that are provided with you the complete freedom to employ it either as short-therm proof-of-concept
with connected sensors provides the database for the an integrated intelligence or available as a freely or as XDK Node for long-term IoT projects.
significant increase of the total plant efficiency by: programmable variant to creatively design individual
solutions.
ff Early recognition of sings of wear
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Reduced downtimes On the following pages, BCDS offers basic technical Connected Industrial Sensor Solution | CISS
ff Process optimization training and a hackathon in order to introduce you to CISS – a pioneer of its class
The CISS is a small and robust multi-sensor device with eight different
ff Quality assurance the topics Industry 4.0 and Internet of Things.
sensors as well as BLE and USB connectivity that can be configured
ff Automatic documentation individually. It was designed for the application in harsh industrial
Electric drives
and controls
Besides the technical basics of the measured value environments and is used for process and condition monitoring in order to
drives and
controls
Electric
Tightening
systems
systems
The SCD enables companies to get started easily with Industry 4.0.
The four-day hackathon offers the possibility to The sensor device is equipped with four different sensors and BLE
connectivity. As a cost-effective and easy-to-install solution, the SCD can be
realize your own ideas with the help of
attached to almost any component in order to start the data acquisition
Bosch experts, where appropriate. process right away. The data is visualized and stored via an app that can be
technology
technology
operated without prior knowledge.
Welding
Welding
Linear motion and
Linear motion
and assembly
technology
The specialist for vibration measurement.
nology
The IVAS is equipped with two accelerometers with a high bandwith and
a high resolution and provides basic data via the Ethernet connectivity for
the realization of process optimizations, preventive maintenance and
quality assurance by vibration-based condition monitoring. This way, the
IVAS contributes to considerable cost savings.
Pneumatics
Pneumatics
Transport Data Logger | TDL110
Safety technology
Safety technology
Your transported and stock goods always in view
The TDL110 can be individually configured and measures and records
relevant data such as temperature, humidity and shock events. This data
can be read out via BLE. By this, the TDL110 ensures reliable,
continuous and efficient monitoring as well as documentation of the entire
supply chain.
Energy efficiency
efficiency
Energy
AT-IoT-Sens-Basic AT-IoT-Sens-Hack
Technical introduction to the IoT sensor Connected sensor devices – Hackathon
New training
New training
courses
courses
technology for factories of the future
eDrive & Control
Academy
In this training course, you will get to know the opportunities of the IoT sensor a platform to design prototypes, familiarize oneself with UX methods,
technology in the industry through presentations and demonstrations of design thinking and business modeling and try new methods.
application examples. You will learn how preventive maintenance and process The possibilities are endless as XDK and IVAS leave plenty of room for
hydraulics
hydraulics
Industrial
Industrial
optimization, an increase of efficiency and the prevention of downtimes are creativity and infinite use cases are created by free programming and the
made possible by the early recognition of optimization potentials of Use connection with other devices.
Monitoring with the Bosch Connected Devices and Solutions (BCDS) sensor
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
technology. Furthermore, you will become familiar with the various possible
CONTENTS DATES (GERMAN) TRAINING
uses and the practical basics for implementing the IoT sensor technology.
LOCATION
ff Independent commissioning of the hardware and
gaining first experiences September 15 - September 18, 2020 Ulm
CONTENTS DATES (GERMAN) TRAINING LOCATION
Automation and
Automation and
December 1 - December 4, 2020
Industry 4.0
Industry 4.0
ff Conceptualizing and developing IoT solutions Ulm
ff Measurement recording: Measurement principle September 14, 2020 Ulm and apps
and possible applications of different sensors November 30, 2020 Ulm ff Realizing own topics with the support of TRAINING TIME
ff Data processing and preprocessing Bosch experts
4 days:
ff Selection of suitable methods of transferring data TRAINING TIME
Electric drives
Electric drives
and controls
and controls
Days 1 to 3 8:00 AM – 4:30 PM
ff Energy management of wireless sensor units LEARNING TARGET
Day 4 8:00 AM – 2:00 PM
1 day: 8:00 AM – 4:30 PM ff Becoming familiar with the sensor technology
LEARNING TARGET
products by Bosch Connected Devices and PRICE
ff Better understanding of the Internet of Things PRICE Solutions (BCDS) and their possible uses
Tightening
Tightening
ff €2,187.00 (net) / €2,602.53 (gross)
systems
systems
(IoT) and Industry 4.0 (i4.0) ff Using the universal BCDS sensor hardware and
ff €838.00 (net) / €997.22 (gross) (training course including XDK)
ff Functionality of MEMS sensor technology the workbench as a starting point for solving
(training course including XDK) ff €2,699.00 (net) / €3,211.81 (gross)
ff Recognizing processes that could be optimized by special problems caused by free programmability
ff €1,350.00 (net) / €1,606.50 (gross) (training course including XDK and IVAS)
the IoT sensor technology ff Developing innovative ideas into
(training course including XDK and IVAS) ff €3,198.00 (net) / €3,805.62 (gross) (training
technology
technology
ff Commissioning of the BCDS sensor technology customer-oriented solutions
Welding
Welding
ff €1,849.00 (net) / €2,200.31 (gross) course including five BCDS Sensor Devices)
ff Cooperative and creative working in
(training course including five BCDS Sensor ff €3,308.00 (net) / €3,936.52 (gross)
PREREQUISITE interdisciplinary teams
Devices) (training course including sensor sales demo case)
ff Windows PC with Windows 10, freely usable USB ff €1,959.00 (net) / €2,331.21 (gross) ff Can only be booked by participants of
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE
technology
technology
port and the possibility to install applications/ (training course including sensor sales demo case) AT-IoT-Sens-Basic:
software ff Windows PC with Windows 10, freely usable €2,022.00 (net) / €2,406.18 (gross)
ff Smartphone (iOS/Android) ADVANCED TRAINING COURSES USB port and the possibility to install (training course without devices)
applications/software
AT-IoT-Sens-Hack
Pneumatics
Pneumatics
TARGET GROUP ff Smartphone (iOS/Android) NOTICE
Service technicians, programmers and NOTICE ff Personalized training course tailored to your
TARGET GROUP
planners/application engineers needs on demand
ff Personalized training course tailored to your
Programmers (software developers) and everyone ff If you have any questions, please contact us at:
Safety technology
Safety technology
needs on demand
who wants to initiate a project as a team training@bosch-connectivity.com
ff If you have any questions, please contact us at:
training@bosch-connectivity.com
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-IoT-Gateway
EST-loT-Gateway MOT-Prod-i4.0
Application of the IoT gateway Visualization of process data
New training
New training
New training
courses
courses
courses
eDrive & Control
Academy
Academy
Insights as well as how to implement sensor technology and controls Industry 4.0-capable assembly technology products. Learn more about
quickly and easily. Further topics are the connection to systems such as ActiveCockpit – the interactive communication platform for the
Cloud services, databases or MES, the recognition of use cases and user manufacturing industry, for efficient, increased productivity through digital
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
benefits as well as the implementation of solutions. process optimization.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
LOCATION
f Hardware and interfaces of the IoT Gateways ff Basics of Industry 4.0 February 12, 2020 Stuttgart/Bad Cannstatt
f Connection of the sensor technology May 26 - May 27, 2020 Lohr am Main ff The ActiveCockpit interactive communication October 27, 2020 Stuttgart/Bad Cannstatt
f Configuration and function of IoT Insights November 24 - November 25, 2020 Lohr am Main platform
f Analysis and assessment of signals, threshold ff Real-time data, visualization and intelligent app DATE (ENGLISH) TRAINING LOCATION
Automation and
Automation and
Automation and
TRAINING TIME
Industry 4.0
Industry 4.0
Industry 4.0
values and warnings for digital shopfloor management
March 16, 2020 Stuttgart/Bad Cannstatt
f Possible applications and getting to know the
2 days:
customer value LEARNING TARGET
Day 1 10:00 AM – 4:30 PM TRAINING TIME
Day 2 8:00 AM – 3:30 PM ff Becoming familiar with the basic concepts of
LEARNING TARGET 1 day: 9:00 AM – 5:00 PM
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
Industry 4.0
f Configuring and commissioning IoT Gateway and PRICE ff Gaining insight into the uses and applications of
PRICE
IoT Insight independently Industry 4.0 for assembly purposes
€1,020.00 (net) / €1,213.80 (gross)
f Integrating sensor technology and the ff Understanding how digitization can contribute to €495.00 (net) / €589.05 (gross)
user-specific Insights configuration quickly transparency
Tightening
Tightening
Tightening
ADVANCED TRAINING COURSES
systems
systems
systems
f Recognizing use cases independently and ff Knowing the potential uses and functionality of NOTICE
implementing the application Individual workshop for use case design ActiveCockpit
ff Being able to independently configure
TARGET GROUP Digital Dashboard
technology
technology
technology
ff Getting an idea of how networking can be
Welding
Welding
Welding
Service technicians, programmers,
realized gradually
planners/application engineers, managers
TARGET GROUP
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
Programmers, planners/application engineers,
managers
Pneumatics
Pneumatics
Pneumatics
Safety technology
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
@ @
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
170 Drive & Control
Automation andAcademy
Industry| 4.0
Training Program 2020 Electric
Training Program 2020 | Drivedrives and Academy
& Control controls 228 227 Electric
Drive drives and
& Control controls
Academy | Training Program 2020 Training Program 2020 | Drive & and
Automation Control Academy
Industry 4.0 171
ESTG-OCI EST-XLC/MLC-OCI-EASY
EST-XLC-MLC-OCI-EASY
Basics of open core engineering Introduction to open core interface
New training
New training
New training
New training
courses
courses
courses
courses
eDrive & Control
Academy
Academy
Academy
Academy
of modern high-level language-based applications and IT-based Open Core Interface. The course delves into the subject by using simple
technologies. For the first time, the previously separate worlds of PLC and exercises with Microsoft Office Tools based on VBA. You will complete the
IT automation are ideally joined in an integrated engineering portfolio. This exercises with real training devices (XLC and MLC).
hydraulics
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
Industrial
course teaches the background and benefits of Open Core Engineering.
Mobile electronics
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
f Overview of OCI Dates and training locations available on request
f What is Open Core Engineering and what is the Dates and training locations available on request f Installing SDK
Open Core Interface (OCI)? f OCI documentation TRAINING TIME
f What kinds of applications are in the spotlight? TRAINING TIME f Using OCI in Excel
2 days:
Automation and
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
f What applications have already been
Industry 4.0
Industry 4.0
2 days: Day 1 10:00 AM – 4:30 PM
implemented? LEARNING TARGET
Day 1 10:00 AM – 5:00 PM Day 2 8:00 AM – 3:00 PM
f Practical demonstrations
Day 2 8:30 AM – 3:00 PM f Recognizing the possible uses of OCI
f Being able to read diagnostic information, PRICE
LEARNING TARGET
Electric drives
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
and controls
PRICE parameters, etc. using Excel
€1,020.00 (net) / €1,213.80 (gross)
f Knowing the background of Open Core
€799.00 (net) / €950.81 (gross)
Engineering PREREQUISITE
NOTICE
f Being able to classify the Open Core Interface in
ADVANCED TRAINING COURSES f Basic programming skills
Open Core Engineering You can find the current offer online at:
Tightening
Tightening
Tightening
Tightening
f Knowledge of XLC or MLC
systems
systems
systems
systems
f Knowing the functions of the Open Core Interface EST-XLC/MLC-OCI-EASY, EST-XLC/MLC-OCI-WIN www.boschrexroth.com/training
f Knowledge of Microsoft Office tools
f Recognizing potential areas of use
NOTICE
TARGET GROUP
PREREQUISITE
This training course is not primarily intended for
technology
technology
technology
technology
Service technicians and planners/application
Welding
Welding
Welding
Welding
Interest in Open Core Engineering and Open Core high-level language programmers and only depicts
engineers
Interface the use of development environments for exemplary
purposes.
TARGET GROUP
Linear motion
Linear motion
and assembly
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
technology
Planners/application engineers, managers and
trainers
Pneumatics
Pneumatics
Pneumatics
Pneumatics
Safety technology
Safety technology
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
Energy efficiency
@ @
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
172 Drive & Control
Automation andAcademy
Industry| 4.0
Training Program 2020 Training Program 2020 | Drivedrives
Electric & Control
and Academy
controls 229 Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 173
EST-XCL_MLC_OCI_WIN
EST-XLC/MLC-OCI-WIN
Notes
Windows programming with
New training
New training
New training
courses
courses
courses
open core interface
eDrive & Control
Academy
Academy
based on Open Core Interface (OCI). After an overview of the possibilities
of Open Core Interface, you will use practical programming examples to
independently work out the core steps for using the OCI in Windows.
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
All exercises will be completed with real training devices (XLC and MLC).
The Visual Studio projects created during the exercises can also be
reproduced after the course with Visual Studio Express.
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
Industry 4.0
f Introduction to the toolbox Dates and training locations available on request
f Installing SDK
f Overview of OCI TRAINING TIME
f Existing libraries
3 days
f OCI documentation
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
Day 1 10:00 AM – 4:30 PM
f OCI user management
Day 2 8:00 AM – 4:30 PM
f Programming examples in C# and programming
Day 3 8:00 AM – 3:00 PM
exercises
PRICE
Tightening
Tightening
Tightening
LEARNING TARGET
systems
systems
systems
€1,440.00 (net) / €1,713.60 (gross)
f You can create Windows programs in C# in order to
- Collect diagnostic data
NOTICE
- Command axes
technology
technology
technology
- Create your own HMI applications You can find the current offer online at:
Welding
Welding
Welding
www.boschrexroth.com/training
PREREQUISITE
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
f Knowledge of XLC or MLC
TARGET GROUP
Pneumatics
Pneumatics
Safety technology
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
@
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
174
58 Industrial
Automation hydraulics
and Industry 4.0 Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Automation
Industrial
and Industry
hydraulics
4.0 175
59
HED-G
Hydraulics –
New training
New training
courses
courses
Electrification and digitization – Basics
eDrive & Control
Academy
hydraulic components and electrical and digital systems and units has long
been standard practice in the industry. The result is a practically
inexhaustible "intelligent" toolkit for realizing application-specific, smart
hydraulics
hydraulics
Industrial
Industrial
hydraulic systems. Ultra-modern asynchronous motors, servo synchronous
motors and servo torque motors, flexible and compact frequency converters,
controller systems, bus systems, sensor technology, servo drives, interface
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
systems, software, and much more bring classical hydraulics into a new
league. Parameterization, communication, multi-functionality, visualization,
diagnostics, etc. are becoming the standard in hydraulic systems.
Automation and
Automation and
Industry 4.0
Industry 4.0
CONTENTS LEARNING TARGET DATES (GERMAN) TRAINING
LOCATION
f Intelligent pressure supply aggregates f Receive an overview of the components, modules
(Rexroth CytroPac) and systems for the electrification of the February 17 - February 19, 2020 Würzburg
Electric drives
Electric drives
and controls
and controls
- Learning the structure, function, electrical hydraulics/hydraulic systems August 10 - August 12, 2020 Würzburg
connection, configuration, parameterization and f Receive an overview of the software, bus systems November 9 - November 11, 2020 Würzburg
commissioning using practical exercises and interfaces for the digitalization of the
f Hydraulic linear drive/axis controller hydraulics/hydraulic systems DATE (ENGLISH) TRAINING
LOCATION
Tightening
Tightening
(Rexroth IAC) with valve and sensor technology f Deepen understanding of parameterization and
systems
systems
- Position control with practical exercises dialog communication with practical examples September 28 - September 30, 2020 Würzburg
f Basic knowledge of bus technology f Overview of upcoming integration possibilities for
- Field bus, Industrial Ethernet bus further electrification and digitization of Please contact us for more dates and individual
f Basic knowledge of IO-Link valves and sensors, hydraulic systems training courses. We would be happy to help you.
technology
technology
Welding
Welding
practical exercises
PREREQUISITE TRAINING TIME
Linear motion
and assembly
and assembly
EHG training courses or comparable knowledge Day 1 10:00 AM – 4:30 PM
technology
technology
Day 2 8:00 AM – 4:30 PM
Bosch Rexroth is your global partner for powerful, proven hydraulic drive solutions for
every application, continually setting new benchmarks for performance, functionality
and lifetime. We help our customers to master force and torque.
TARGET GROUP Day 3 8:00 AM – 2:30 PM Our complete portfolio cost-effectively serves standard applications as well as complex
motion tasks with the most demanding requirements.
We exceed your expectations, applying our unique expertise to go beyond limits.
Our connected hydraulics solutions fit seamlessly into modern control architectures:
Operators, service technicians, planners/application PRICE from small to large, from series to project business, all backed by worldwide service.
We move everything – mastering force and torque
Pneumatics
Pneumatics
engineers and trainers
€1,353.00 (net) / €1,610.07 (gross)
Safety technology
www.connected-hydraulics.com
HTPPu, HTP-PC, Sytronix training courses, You can find the current offer online at:
i4.0 training courses (see offer in this catalog) www.boschrexroth.com/training
REXR_ConHyd_AD_A4_A.indd 1 23.05.17 11:38
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-IAC-HMC1
VT-HMC Hydraulic axis controller/IAC
New training
New training
courses
courses
multi-ethernet valve
eDrive & Control
Academy
This training course addresses the basic structures of the best-in-class
controller. You will work on a hydraulic axis with the IAC Multi-Ethernet
valve or the VT-HMC motion controller. Within the scope of the practical
hydraulics
hydraulics
Industrial
Industrial
tasks, you will commission the hydraulic components with IndraWorks Ds.
You will become familiar with the hardware and software properties of the
products, as well as the optimization options for this best-in-class
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
controller. The course also focuses on communication with the higher
control system.
Automation and
Industry 4.0
Industry 4.0
f Hardware and software properties of the IAC If you have no previous knowledge of hydraulics, 3 days:
Multi-Ethernet valves and the VT-HMC motion you must first complete the HTG training course or Day 1 10:00 AM – 4:30 PM
controller the eHTB and eHTVT eLearning courses. Day 2 8:00 AM – 4:30 PM
f Structure and initial commissioning of a hydraulic A further prerequisite is the completion of the Day 3 8:00 AM – 4:30 PM
Electric drives
Electric drives
and controls
and controls
axis on the training system with the IAC DCA_eT_Controller eTraining course/webinar.
Multi-Ethernet valve or the VT-HMC motion PRICE
controller TARGET GROUP
€1,508.00 (net) / €1,794.52 (gross)
f Carrying out axis motions in position control,
Service technicians, planners/application engineers,
Tightening
Tightening
pressure/force control and with the substitutional
systems
systems
managers and trainers ADVANCED TRAINING COURSES
closed-loop control (position and force control)
f Being able to optimize the axis controller HTP-HMC2
DATES (GERMAN) TRAINING
f Understanding the procedure for commissioning
LOCATION
the products NOTICE
technology
technology
Welding
Welding
f Structure of communication with a higher control April 27 - April 29, 2020 Würzburg
You can find the current offer online at:
system via PROFINET.RT October 19 - October 21, 2020 Würzburg
www.boschrexroth.com/training
Linear motion
and assembly
and assembly
technology
technology
LOCATION
f Familiarity with the structure and use of IAC
Multi-Ethernet valves and the VT-HMC motion September 7 - September 9, 2020 Würzburg
controller
f Understanding the procedure for commissioning Please contact us for more dates and individual
Pneumatics
Pneumatics
the products training courses. We would be happy to help you.
f Being able to set up communication with a higher
control system
f Being able to analyze data
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
@
HTP-HMC2 EST-MTX-EWB
Motion control for hydraulics MTX Efficiency workbench
New training
training
New training
courses
courses
courses
programming the VT-HMC motion controller
New
eDrive & Control
Control
& Control
This practical training is intended for automation specialists and In this training course, you will become familiar with the functions of the
Academy
Academy
Academy
programmers who use the VT-HMC hydraulic motion controller by Rexroth. MTX Efficiency Workbench. This training course not only deals with the
eDrive &
eDrive
This training shows how to work with the programming environment of the cycle time analyzer to optimize cycle time and productivity, but also focuses
motion controller. Within the scope of practical exercises, you will program on the functions for optimizing media consumption.
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
motion sequences in IndraWorks based on the IEC 61131-3 standard.
electronics
Mobile electronics
Mobile hydraulics
hydraulics
Mobile hydraulics
f Parameterizing the system with IndraWorks MLD Service technicians, programmers, f Concept of the MTX Efficiency Workbench Dates and training locations available on request
f The programming environment of the planners/application engineers and managers f Overview and explanation of the individual
Mobile
Mobile
motion controller analysis functions TRAINING TIME
f Programming motion sequences using IEC 61131-3 DATE (GERMAN/ENGLISH) TRAINING LOCATION f Commissioning the MTX Efficiency Workbench
3 days:
Automation and
and
Automation and
Industry 4.0
4.0
f Carrying out axis motions in position control and
Industry 4.0
f Taking a recording
Dates and training locations available on request
Automation
Day 1 10:00 AM – 4:30 PM
Industry
pressure/force control as well as with the f Analysis and interpretation of a recording to
Day 2 8:00 AM – 4:30 PM
substitutional closed-loop control optimize the cycle time
TRAINING TIME Day 3 8:00 AM – 3:00 PM
f Backing up data and replacing components with f Analysis and interpretation of a recording to
the VT-HMC system 2 days: analyze the media consumption
Electric drives
drives
Electric drives
and controls
controls
and controls
PRICE
Day 1 8:00 AM – 4:30 PM f Practical sample applications
Electric
LEARNING TARGET Day 2 8:00 AM – 1:00 PM €1,440.00 (net) / €1,713.60 (gross)
and
LEARNING TARGET
f Familiarity with the structure and use of the
PRICE NOTICE
VT-HMC motion controller f Knowing the advantages and possible uses of the
Tightening
Tightening
Tightening
systems
systems
systems
f Being able to program and optimize motion €879.00 (net) / €1,046.01 (gross) MTX Efficiency Workbench for cycle time and You can find the current offer online at:
sequences energy optimization www.boschrexroth.com/training
f Being able to analyze data NOTICE f Being able to commission the software
f Being able to optimize the cycle time and media
You can find the current offer online at:
technology
technology
technology
PREREQUISITE consumption using EWB
Welding
Welding
Welding
www.boschrexroth.com/training
This training builds on the HTP-IAC-HMC1 training.
PREREQUISITE
Therefore, this training course must be completed
first. f Basic knowledge of control technology
Linear motion
motion
and assembly
assembly
Linear motion
and assembly
technology
technology
technology
Participation with no programming knowledge is f Completion of the EST-MTX-BedProg training
recommended and the eESTG eLearning course
Linear
course or comparable knowledge
and
should be completed in advance. Completion of the
HTP-PRO training course is also a prerequisite. TARGET GROUP
Pneumatics
Pneumatics
Pneumatics
Service technicians and planners/application
engineers
Safety technology
technology
Safety technology
Safety
@ @
NEU LW NEU LW
Energy efficiency
efficiency
Energy efficiency
@ @
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
180 Drive & Control
Automation andAcademy
Industry| 4.0
Training Program 2020 Training Program 2020 | Drive & Control
Industrial Academy
hydraulics 95 Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 181
HTP-CytroPac
Notes
Commissioning CytroPac
New training
New training
New training
courses
courses
courses
eDrive & Control
Academy
Academy
small aggregate with multi-Ethernet connection to superordinate command
communication levels. The main topics are project planning, commissioning,
parameterization and network connection will be taught in theory and
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
practice.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
f Basics of a variable speed drive Service technicians, operators and
f Parameter structure EFC5610 planners/application engineers
f CytroPac-specific settings
f System limits DATES (GERMAN) TRAINING
Automation and
Automation and
Automation and
LOCATION
Industry 4.0
Industry 4.0
Industry 4.0
f Integration via bus technology
f Configuration via IndraWorks DS
May 28 - May 29, 2020 Würzburg
f Troubleshooting
July 13 - July 14, 2020 Würzburg
November 5 - November 6, 2020 Würzburg
LEARNING TARGET
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
f Overview of the structure and function of CytroPac DATE (ENGLISH) TRAINING
- Connections, power, cooling, accessories LOCATION
- Documentation (RD51055, RD51055-B)
August 13 - August 14, 2020 Würzburg
- Media: Rexroth ICS, AB WIKI
Tightening
Tightening
Tightening
systems
systems
systems
f Commissioning CytroPac
Please contact us for more dates and individual
- Connect correctly, configuration, start system,
training courses. We would be happy to help you.
optimize system
TRAINING TIME
technology
technology
technology
PREREQUISITE
Welding
Welding
Welding
2 days:
Completion of the HTG/eHTB and eHTVT
Day 1 10:00 AM – 4:15 PM
training courses or comparable knowledge
Day 2 8:00 AM – 3:00 PM
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
PRICE
Pneumatics
Pneumatics
NOTICE
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
@
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
182 Automation and Industry 4.0 Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 183
New training
courses
courses
eDrive & Control
Academy
Bosch Rexroth. It can be completed with a CCI certification. Agile – smart – connected
MODULE 1:
hydraulics
hydraulics
Industrial
Industrial
Basics of Industry 4.0 (1 Day)
ff Basics of Industry 4.0
REALIZING HIGHTECH 4.0 ff Prerequisites for Industry 4.0
ff Typical fields of application
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
This practice-oriented certificate course for potential in your own company and use it effectively ff Industry 4.0 as an industrial revolution
becoming an Industry 4.0 specialist (CCI) is offered thanks to the knowledge and skills acquired in the ff Trends in Industry 4.0
Automation and
Industry 4.0
Industry 4.0
MODULE 2:
MODULE 1: Connected business models in production and logistics (4 Days)
Basics of Industry 4.0 ff Higher-level technologies
Electric drives
and controls
drives and
Tightening
systems
systems
MODULE 3:
Technologies for implementing Industry 4.0
MODULE 3:
technology
technology
Technologies for implementing Industry 4.0 (2 Days)
Welding
Welding
ff Connection of production to the IT world
MODULE 4:
(data sources, sensors, cyber-physical systems, IoT gateways,
The design of work and organization in the age of digital change OPC-UA, Cloud, etc.)
ff Data processing and visualization (analysis, cockpit functions,
Linear motion and
assembly tech-
Linear motion
and assembly
alarms, cloud computing, etc.)
technology
nology
Pneumatics
CCI certification
MODULE 4:
The design of work and organization in the age of
digital change (3 Days)
Safety technology
Safety technology
ff Individual-technology-organization
ff Digitization and changes to work
Contact: ff Traditional versus agile working methods
Würzburg-Schweinfurt CCI ff SCRUM approach
ff Changes and design approaches
Christian Kroll FIND OUT MORE AT
www.industriefachkraft-ihk.de @
Phone: +49 931 4194-204 NEU LW
Energy efficiency
@
efficiency
Email: christian.kroll@wuerzburg.ihk.de
Energy
New training
courses
courses
eDrive & Control
Academy
The system addresses a real-life cube assembly, from the removal out of groups at the following locations.
a rack to processing with a pressing machine, through to storage in
a high-bay warehouse. Assembled from standard components, Completely
hydraulics
hydraulics
Industrial
Industrial
interconnected, programmable and extensively secured. Cells can be
flexibly added to the system, such as a 6-axis jointed-arm robot. The entire
system or individual stations are shipped fully assembled, installed, and ff Blaichach: Chassis System Control
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
programmed. You can get started right away. Special i4.0 device sets with ff Homburg: Diesel Systems WE WOULD BE HAPPY TO ASSIST
exercises have been added to this system. This makes it possible to convey ff Lohr am Main: Automation and Electrification YOU WITH ANY QUESTIONS
Solutions ABOUT i4.0!
the transition into the world of i4.0 in a very practical way. ff Nuremberg: Powertrain Solutions Drive & Control Academy
ff Reutlingen: Automotive Electronics
Automation and
Automation and
Bahnhofplatz 2
Industry 4.0
Industry 4.0
ff Salzgitter: Automotive Electronics 97070 Würzburg, Germany
ff Stuttgart-Feuerbach: Diesel Systems Phone: +49 9352 18-1920
training@boschrexroth.de
drives and
drives and
controls
controls
Electric
Electric
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion and
assembly tech-
nology
nology
Pneumatics
Pneumatics
Safety technology
Safety technology
efficiency
efficiency
www.boschrexroth.com/trainingsystems
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
186 Automation and Industry 4.0 Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 187
New training
From lean management to
courses
courses
Industry 4.0
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
Requirements for Testing and
Use Case technology, users, implementation
Definition processes
Mobile electronics
Mobile electronics
phase
Mobile hydraulics
Mobile hydraulics
i4.0 Vision and Concept Specification and Training and
strategy development adaptation integration
Automation and
Automation and
Industry 4.0
Industry 4.0
Expertise Consulting Solutions Products
Leading user Leading provider Leading user Leading provider
Electric drives
Electric drives
and controls
and controls
Low Degree of detail High
Bosch Industry Consulting is the ideal partner for the We are convinced that Industry 4.0 starts with lean
Tightening
Tightening
systems
systems
networked value stream. We ensure leaner processes management. Accordingly, we consider the holistic
and a more efficient production. Not only do we process optimization as the first step for successful
submit proposals for this purpose, but we also networking.
develop concrete solutions with our customers and
technology
technology
implement them in a goal-oriented manner. We will start with our lean consulting exactly where
Welding
Welding
In doing so, we use the extensive experience of it is needed. Whether it is about the networking of
Bosch as leading user and leading provider of individual production lines or the transformation of
Industry 4.0. an existing factory – our customers will profit from
Linear motion
Linear motion
and assembly
and assembly
the experience and expertise of the Bosch plants
technology
technology
We offer practice-oriented consultation proven in worldwide. Furthermore, they will receive exactly the
many industries with the goal to find the best consultation, support and solutions they need for the
Industry 4.0 strategy for every customer. digitalization of their production and logistics.
Independence and objectivity are first priority.
Pneumatics
Pneumatics
Just like we at Bosch use a mixture of our own
products and solutions from third-party providers,
we will also search for the option that fits best for
each project.
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
188 Automation and Industry 4.0 Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 189
New training
courses
courses
Our Industry 4.0 Overview of our services
consulting expertise
eDrive & Control
Academy
hydraulics
hydraulics
Industrial
Industrial
With customer-specific strategies and concepts, we ensure a better Technology assessment Individual Industry 4.0 strategy
We will examine very carefully which innovative and We will analyze your starting situation and develop
performance of production and logistics processes. In doing so, we create
novel technologies best fit your production and an Industry 4.0 roadmap with you so that you can
competitive advantages. Our expertise is complemented and enhanced by
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
logistics. digitalize your processes efficiently and increase your
a pool of experts. competitiveness.
Optimization of value stream Definition and evaluation of Industry 4.0 use cases
Lean management is the basis for Industry 4.0. Along your value stream, we will define potentials for
Automation and
Automation and
Industry 4.0
Industry 4.0
BCI consulting team Bosch Crowd Staffing We will ensure that you reach the process maturity in improvement and analyze the processes in which
your production in order to be able to easily realize concrete Industry 4.0 measures should be
Production Industry 4.0 projects. implemented.
Bu
Orientation
Electric drives
Electric drives
and controls
and controls
si
Pla Development of technical Industry 4.0 concepts Feasibility studies
ne
ss u
nts
Logistics IT In order to realize your use cases, we will develop For your specific Industry 4.0 use cases, we will
nits
Leading Leading
tailor-made concepts with which you can put carry out a detailed analysis regarding use and
user provider
Specification Industry 4.0 into practice in your production. expense and derive a ROI as the basis of
Change
decision-making.
Tightening
Tightening
systems
systems
De
par tments
Conceptualization Cross-functional
technology
technology
Welding
Welding
The consulting offering of Bosch Industry Consulting Our extensive pool of experts includes experienced
extends from the supplier to the manufacturer and Industry 4.0 consultants and technical experts from PLEASE CONTACT US:
Linear motion
Linear motion
and assembly
and assembly
from medium-sized to large companies. We are a wide range of fields who are deployed depending You can contact us by phone
technology
technology
currently specializing in the industries that we know on the specific project and thematic focal point. +49 711 811-17750,
very well from our own work: Machinery and system They all have one thing in common: A profound or by email
construction industry, automobile industry and technology and process expertise from operative Industry.Consulting@de.bosch.com
packaging industry. It goes without saying that we practice.
Pneumatics
Pneumatics
are also happy to support companies of other Bosch Industry Consulting
industries in their Industry 4.0 projects in an
advisory capacity.
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
190 Automation and Industry 4.0 Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Automation and Industry 4.0 191
Workshop
i4.0 Orientation week
New training
New training
courses
courses
eDrive & Control
Academy
Industry 4.0 roadmap with you so that you can digitalize your processes
efficiently and increase your competitiveness.
hydraulics
hydraulics
Industrial
Industrial
AGENDA OF THE i4.0 ORIENTATION WEEK:
CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
We will determine the contents of the workshop with Plant managers, production managers, Monday
you. For this purpose, we will include your logistics managers and digitalization managers 1 Kickoff, first value stream inspection and interviews
i4.0 strategy and the previous activities as well as with the management
existing solutions. DATE
Automation and
Automation and
Industry 4.0
Industry 4.0
Exemplary, a workshop may include the following:
Location and workshop language on request Tuesday
ff Common understanding of your goals and strategy
ff Detailed analysis of the value stream and the 2 Detailed value stream analysis and identification
WORKSHOP TIME of the pain points
production and logistics processes in order to
identify the existing pain points 5 Days on-site in your value stream plus preparation
Electric drives
Electric drives
and controls
and controls
ff Execution of our lean and i4.0 assessment in and follow-up
Wednesday
order to assess your current starting points in
3 Interviews on the shopfloor and assessment of the level of
those topics PRICE
maturity regarding lean management and i4.0
ff Merger of the pain points recognized and
Available on request
Tightening
Tightening
derivation of suitable use cases
systems
systems
ff Development of a roadmap including the key Thursday
NOTICE
fields for implementation 4 Analysis of focused value stream segments and functional areas
The i4.0 Innovation Workshop can take place after to derive use cases
GOAL the Orientation Week to implement identified use
technology
technology
Welding
Welding
cases and develop first prototypes.
ff Transforming your plant/production strategy into
Friday
Industry 4.0 5 Presentation of the results including identified key fields and
ff Understanding which added values digitalization
use cases
Linear motion
Linear motion
and assembly
and assembly
can create for your company
technology
technology
ff Generating use cases to optimize your value-added
chain
ff Identifying concrete measures and projects for Results:
the realization of potential ff Level of maturity of lean management and pain points as
Pneumatics
Pneumatics
well as level of maturity of i4.0 and use cases
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
@
Workshop
i4.0 Innovation workshop
New training
New training
courses
courses
eDrive & Control
Academy
and your own products? During this workshop tailored to your needs, we Understanding requirements Developing ideas
and concepts
will work with you to come up with a specific implementation perspective. and potentials together
hydraulics
hydraulics
Industrial
Industrial
CONTENTS GOAL
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Status quo review through factory walk, The Industry 4.0 Innovation Workshop is designed in
interviews or user observation conjunction with you to address your requirements
ff Potential of Industry 4.0 technologies and key and circumstances. Typically, we focus on the
questions for conceptualization following workshop objectives:
Automation and
Automation and
Industry 4.0
Industry 4.0
Electric drives
and controls
drives and
controls
Electric
Tightening
ff Sketch – Develop ideas and concepts verifying suitability experiencing solutions
systems
systems
technology
Welding
Welding
-- Scouting of potential technological solution
modules (building blocks) Technical decision-makers, technical managers and Available on request
-- Creation of mock-ups and prototypes plant managers
NOTICE
Linear motion and
Linear motion
and assembly
technology
-- User test to verify plausibility of use cases DATE
nology
Pneumatics
Customer-specific agreement (approx. 1 to 3 Days)
Safety technology
Safety technology
@
NEU LW
Energy efficiency
@
efficiency
Energy
THE CURRENT
YOU CAN FIND
NE AT:
OFFERING ONLI g
oth.com/trainin
www.boschrexr
www.boschrexroth.com/training
Electric drives
and controls
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software developers Decision-makers Teachers
Face-to-face engineers
training Motion Logic (Drive-Based) – MLD Assembly personnel Maintenance personnel IT specialists
Project engineers
Executives Trainers
Commissioning engineers Commissioning Plant managers
Developers/design
Mechanical engineers engineers Proprietors
eLearning engineers
Electricians Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
DRIVE TECHNOLOGY – INDRADRIVE
201 eEATG Basic knowledge of electric drive technology ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
203 EAT-ID-I IndraDrive – Diagnostics and servicing ● ●
Automation and
Industry 4.0
Industry 4.0
207 EAT-ID-Update Transition course V1 V2 ● ●
Electric drives
MPC/FTS
and controls
and controls
211 MPC_YM_Engineering MPC/YM – Engineering Upon consultation ● ●
Tightening
systems
systems
PLC INDRAWORKS/INDRALOGIC
215 eESTG Basic knowledge of electric control technology ● ● ● ● ● ●
technology
Welding
Welding
218 ESTG-Ind-Ethernet Basic knowledge of industrial ethernet ● ● ● ● ●
Linear motion
and assembly
and assembly
technology
technology
221 EST-IW/IL 2G-Prog-ST Programming with IndraWorks/IndraLogic 2G in structured text ● ● ●
XLC/MLC
Pneumatics
Pneumatics
225 EST-MLC-IP MLC – Commissioning and project planning ● ●
Safety technology
228 EST-XLC/MLC-OCI-EASY Introduction to open core engineering ● ●
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
198 Electric drives and controls Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Electric drives and controls 199
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software developers Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel IT specialists Executives Trainers
Project engineers
Commissioning engineers Commissioning Plant managers
Developers/design
Mechanical engineers engineers Proprietors
eLearning engineers
Electricians Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
MTX CNC SYSTEM
234 ESTG-CNC Basic knowledge of CNC technology ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
236 EST-MTX-InProj 2G Commissioning and project planning of the MTX CNC system with Sercos III ● ●
237 EST-MTX-I Maintaining and servicing the MTX system with Sercos II and Sercos III ●
Automation and
Industry 4.0
Industry 4.0
240 EST-MTX-CTA MTX Cycle time analyzer ● ●
Electric drives
MOTION LOGIC (DRIVE-BASED) – MLD
and controls
and controls
244 EAT-ID MLDS/MLDM 2G-Prog Programming MLD-S and MLD-M 2G ● ● ●
Tightening
systems
systems
247 ELECTRIC DRIVES AND CONTROLS SPECIAL TRAINING
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
200 Electric drives and controls Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Electric
eDrive &drives andAcademy
Control controls 201
35
New training
Drive technology – IndraDrive
courses
courses
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING drive components. It is recommended for anyone who plans to attend
dd IndraDrive dd 1st Generation intermediate training courses. Here, you will learn the concepts of electric
drive systems and gain insight into industrial drive technology.
hydraulics
hydraulics
Industrial
Industrial
3 3 1
EATG-11) EAT-ID-I EAT-ID-Update
Basic knowledge of IndraDrive – Diagnostics Transition course
electric drive and servicing V1 V2
technology
Mobile electronics
p. 202 p. 203 p. 207
Mobile hydraulics
Mobile hydraulics
2 f Basic introduction to electric drive technology Operators, service engineers, programmers,
eEATG1)
Basic knowledge
EAT-ID-Opt
IndraDrive
f Electric motors, operating principles and planners/implementers, managers, trainers
of electric
drive technology
drive optimization properties
(eLearning)
f Basics of encoder systems TRAINING TIME
Automation and
Automation and
p. 201 p. 209
Industry 4.0
Industry 4.0
f Drive controller and control procedures
During the license term, the eLearning is available
f Gears in drive technology
at any time. The license period is 12 months after
activation.
LEARNING TARGET
dd 2nd Generation
Electric drives
Electric drives
and controls
and controls
f Getting an overview of electric drive technology Duration: approx. 3 to 4 hours
3 3 2 f Understanding drive system concepts
EATG-11) EAT-ID-I EAT-ID-Si L3/S4 f Knowing about different drive components AVAILABLE LANGUAGES
Basic knowledge of IndraDrive – Diagnostics L3/S4/S5/SB Drive-
electric drive and maintenance Integrated safety f Being familiar with the different motor types
technology technology German, English, Spanish
(synchronous, asynchronous) and how they work
Tightening
Tightening
systems
systems
p. 202 p. 203 p. 206
f Gaining insight into encoder systems and their
PRICE
3 2 functionality
eEATG1) EAT-ID-Mi EAT-ID-Opt
Basic knowledge IndraDrive Mi – IndraDrive drive
f Being familiar with different drive controllers and When you book the EATG-1 training course you will
of electric drive
technology
Diagnostics and
servicing
optimization
control procedures receive a 12-month single license for the eEATG
technology
technology
(eLearning)
f Knowing about gears and how they work eLearning course free of charge!
Welding
Welding
p. 201 p. 204 p. 209
Linear motion
and assembly
and assembly
technology
technology
f PC with Internet access
p. 208 Price for multi-user licenses upon request
f Email address for personal login
5
EAT-ID-Kompakt
IndraDrive with
multi-ethernet interface
Pneumatics
Pneumatics
– Commissioning and
axis optimization V2 and
safety technology
p. 205
Safety technology
Safety technology
1) W
hen you book the EATG-1 training course you will receive a 12-month
@
NEU LW
Energy efficiency
Energy efficiency
single license for the eEATG eLearning course free of charge. @
EATG-1 EAT-ID-I
Basic knowledge of electric IndraDrive – Diagnostics and servicing
New training
New training
courses
courses
drive technology
eDrive & Control
Academy
developments: We recommend this training course if you plan to participate IndraDrive drive controllers. Using exercises, you will become familiar with
in intermediate training. the different components of this drive family and develop an understanding
of their functionality.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Basic structure of energy conversion using Operators, service engineers, programmers, ff Hardware overview
electric drives (structure and effect) planners/implementers, managers, trainers ff Overview of current software February 4 - February 6, 2020 Lohr am Main
ff Electric motors, different operating principles, ff Replacing components and handling parameters March 17 - March 19, 2020 Lohr am Main
their properties and typical fields of application DATES (GERMAN) TRAINING ff Equipment diagnostic and oscilloscope function April 21 - April 23, 2020 Lohr am Main
Automation and
Automation and
LOCATION
Industry 4.0
Industry 4.0
ff Motor encoders May 26 - May 28, 2020 Lohr am Main
ff Drive control loops (torque, speed and position LEARNING TARGET June 23 - June 25, 2020 Lohr am Main
May 5 - May 7, 2020 Lohr am Main
control loop) and their fields of application September 22 - September 24, 2020 Lohr am Main
November 24 - November 26, 2020 Lohr am Main ff Being able to parameterize drives with
ff Frequency converters, how they work and fields October 27 - October 29, 2020 Lohr am Main
IndraWorks Engineering
of application, practical commissioning exercise December 1 - December 3, 2020 Lohr am Main
Electric drives
Electric drives
and controls
and controls
DATE (ENGLISH) TRAINING ff Being able to replace components
ff Servo drive controllers, how they work and fields
LOCATION ff Being able to troubleshoot errors
of application, practical exercises TRAINING TIME
March 31 - April 2, 2020 Lohr am Main
PREREQUISITE 3 days:
LEARNING TARGET October 6 - October 8, 2020 Lohr am Main
Day 1 10:00 AM – 4:30 PM
Tightening
Tightening
ff Basic knowledge of electrical engineering
systems
systems
ff Getting an overview of electric drive technology Day 2 8:00 AM – 4:30 PM
TRAINING TIME ff Basic knowledge of electric drives
ff Being familiar with and understanding Day 3 8:00 AM – 3:00 PM
(EATG-1 training course or similar knowledge)
components and concepts 3 days:
ff Computer skills
ff Learning about the different drive components, Day 1 10:00 AM – 4:30 PM PRICE
technology
technology
their fields of application and current trends Day 2 8:00 AM – 4:30 PM
Welding
Welding
TARGET GROUP €1,440.00 (net) / €1,713.60 (gross)
ff Being familiar with the different motor types Day 3 8:00 AM – 3:00 PM
(synchronous, asynchronous) and their Service technicians, planners/application engineers
ADVANCED TRAINING COURSES
control procedures PRICE
Linear motion
Linear motion
and assembly
and assembly
ff Gaining practical experience through exercises on EAT-ID-Si L3/S4
technology
technology
€1,440.00 (net) / €1,713.60 (gross)
the servo drive and the frequency converter
NOTICE
NOTICE
PREREQUISITE
When booking, please specify your firmware version.
When you book the EATG-1 training course you will
Pneumatics
Pneumatics
Technical understanding
receive a 12-month single license for the eEATG
You can find the current offer online at:
eLearning course free of charge.
www.boschrexroth.com/training
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EAT-ID-Mi EAT-ID-Kompakt
IndraDrive Mi – Diagnostics and servicing IndraDrive with multi-ethernet interface – Commissioning
New training
New training
courses
courses
and axis optimization V2 and safety technology
eDrive & Control
Academy
IndraDrive Mi drive controller. Using exercises, you will become familiar IndraDrive drive controllers or deepens your knowledge on Sercos III,
with the motor-integrated drive family and develop an understanding of PROFINET, EtherCAT or Ethernet IP control communication. Practical
their functionality. exercises are used to consolidate what is learned. The drive-integrated
hydraulics
hydraulics
Industrial
Industrial
safety technology L3/L4 and S3/S4 will be commissioned.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION LOCATION
ff Hardware overview ff Hardware overview
ff Overview of current software February 12 - February 14, 2020 Lohr am Main ff Overview of current software January 20 - January 24, 2020 Lohr am Main
ff Replacing components and handling parameters June 17 - June 19, 2020 Lohr am Main ff Being able to parameterize drives with March 23 - March 27, 2020 Lohr am Main
ff Equipment diagnostic and oscilloscope function October 20 - October 22, 2020 Lohr am Main IndraWorks Engineering May 11 - May 15, 2020 Lohr am Main
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Replacing components and handling parameters July 6 - July 10, 2020 Lohr am Main
LEARNING TARGET TRAINING TIME ff System diagnostic September 14 - September 18, 2020 Lohr am Main
ff Operating modes and control loops November 16 - November 20, 2020 Lohr am Main
ff Being able to parameterize drives with 3 days:
ff Axis optimization
IndraWorks Engineering Day 1 10:00 AM – 4:30 PM
ff Safe Motion commissioning DATE (ENGLISH) TRAINING
Electric drives
Electric drives
and controls
and controls
ff Being able to replace components Day 2 8:00 AM – 4:30 PM
LOCATION
ff Being able to troubleshoot errors Day 3 8:00 AM – 3:00 PM
LEARNING TARGET
March 9 - March 13, 2020 Lohr am Main
PREREQUISITE PRICE ff Knowing how to commission and optimize axes June 29 - July 3, 2020 Lohr am Main
ff Being able to replace components October 12 - October 16, 2020 Lohr am Main
Tightening
Tightening
ff Basic knowledge of electrical engineering €1,440.00 (net) / €1,713.60 (gross)
systems
systems
ff Being able to troubleshoot errors
ff Basic knowledge of electric drives
TRAINING TIME
(EATG-1 training course or similar knowledge) ADVANCED TRAINING COURSES
PREREQUISITE
ff Computer skills 5 days:
EAT-ID-Si L3/S4
ff Basic knowledge of electrical engineering Day 1 10:00 AM – 4:30 PM
technology
technology
Welding
Welding
TARGET GROUP ff Basic knowledge of electric drives Days 2 to 4 8:00 AM – 4:30 PM
NOTICE
(EATG-1 training course or similar knowledge) Day 5 8:00 AM – 3:00 PM
Service technicians, planners/application engineers
When booking, please specify your firmware version. ff Computer skills
PRICE
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP
€2,050.00 (net) / €2,439.50 (gross)
Service technicians, planners/application engineers
ADVANCED TRAINING COURSES
Pneumatics
Pneumatics
EAT-ID-Si L3/S4
NOTICE
Safety technology
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
Drive-Integrated safety technology
eDrive & Control
Academy
utilize various safety functions directly in the drive. This training simplifies IndraDrive training course for drive units with V1 control units and want to
your introduction to drive-integrated safety technology. expand their knowledge of V2 units as well as consolidate their experience.
In addition to the hardware variants of the new control unit generation, this
hydraulics
hydraulics
Industrial
Industrial
training course focuses on the functions of the current firmware version. In
practical exercises, you will show the new functions of the units and test
CONTENTS DATES (GERMAN) TRAINING them through descriptive examples. Special attention will be given to the
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Hardware overview
LOCATION application of the revised safety technology.
ff Overview of the safety functions May 19 - May 20, 2020 Lohr am Main
(firmware 18VRS or higher) November 10 - November 11, 2020 Lohr am Main
ff Safe Motion commissioning
CONTENTS TARGET GROUP
Automation and
Automation and
TRAINING TIME
Industry 4.0
Industry 4.0
LEARNING TARGET ff Comparing hardware generations V1 and V2 Service technicians, planners/application engineers
2 days:
ff New functions of the current firmware (18VRS)
ff Understanding different drive-internal Day 1 10:00 AM – 4:30 PM
ff New functions of the drive-internal safety DATE (GERMAN/ENGLISH) TRAINING LOCATION
safety functions Day 2 8:00 AM – 3:00 PM
technology
Electric drives
Electric drives
and controls
and controls
ff Being able to parameterize and configure safety Dates and training locations available on request
ff Oscilloscope function
technology using Safe Motion with IndraWorks PRICE
ff Multi-Ethernet control communication
ff Being able to replace components TRAINING TIME
€1,020.00 (net) / €1,213.80 (gross)
LEARNING TARGET 1 day: 8:00 AM – 4:30 PM
PREREQUISITE
Tightening
Tightening
NOTICE
systems
systems
ff Knowing how to commission and optimize an axis
ff Basic knowledge of electrical engineering PRICE
When booking, please specify your firmware version. ff Being able to parameterize drives with the current
ff Basic knowledge of electric drives
version of the IndraWorks engineering tool €590.00 (net) / €702.10 (gross)
(EATG-1 training course or similar knowledge)
You can find the current offer online at: ff Knowing how to replace individual drive
ff Computer skills
technology
technology
www.boschrexroth.com/training components and handling data (incl. control unit NOTICE
Welding
Welding
ff Completion of the EAT-ID-I training course
with safety technology)
When booking, please specify your firmware version.
ff Being able to apply functions of the current
TARGET GROUP
firmware
You can find the current offer online at:
Linear motion
Linear motion
and assembly
and assembly
Service technicians, planners/application engineers ff Being able to troubleshoot errors
technology
technology
www.boschrexroth.com/training
PREREQUISITE
Pneumatics
This training should have been completed within the
last year.
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EAT-ID-ML-I EAT-ID-Opt
Rexroth IndraDrive ML drive system IndraDrive drive optimization
New training
New training
courses
courses
eDrive & Control
Academy
focusing on asynchronous motors on frequency converters and regenerative (EAT-ID-Kompakt). Here, the drive functionality options are presented to
systems for outputs of up to 4 MW. perfectly tune drive and mechanics to one another.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Hardware overview Dates and training locations available on request ff Basics of "control technology in servo drives" Dates and training locations available on request
ff Overview of current software ff IndraDrive control loops and their functions
ff Procedure for commissioning/recommissioning TRAINING TIME ff Potential for optimizing drives in IndraWorks TRAINING TIME
ff Diagnostic options of the system ff Investigation of controlled systems and
2 days: 2 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Structure and function of the cooling system controllers using frequency response analysis
Day 1 10:00 AM – 4:30 PM Day 1 10:00 AM – 4:30 PM
ff Practical exercises including the oscilloscope function
Day 2 8:00 AM – 3:00 PM Day 2 8:00 AM – 3:00 PM
Electric drives
and controls
and controls
ff Being able to apply the IndraWorks ff Knowing the basic functions of the controller in
€1,020.00 (net) / €1,213.80 (gross) €1,020.00 (net) / €1,213.80 (gross)
commissioning and diagnostic tools in the IndraDrive drive system
conjunction with IndraDrive ff Understanding and apply the methods for
NOTICE NOTICE
ff Being familiar with the control cabinet optimizing the drive
arrangement and function of the device used You can find the current offer online at: ff Being able to implement a structured approach to You can find the current offer online at:
Tightening
Tightening
systems
systems
ff Being able to back up and restore data www.boschrexroth.com/training optimizing the drive control circuits www.boschrexroth.com/training
ff Troubleshooting and replacing components ff Knowing the various possibilities of
drive-integrated oscilloscopes and implement them
PREREQUISITE
technology
technology
PREREQUISITE
Welding
Welding
Completion of the EATG-1, EAT-ID-I training courses
or comparable knowledge Completion of the EAT-ID-Kompakt or EAT-ID-I
training course
TARGET GROUP
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP
Service technicians, planners/application engineers
Service technicians, planners/application engineers
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
MPC/FTS
eDrive & Control
Academy
BASIC TRAINING SPECIAL TOPICS
platform, configure and optimize motion axes and program applications with
the MPC software interface.
MPC_YM_Engineering
MPC/YM – Engineering
hydraulics
hydraulics
Industrial
Industrial
p. 211
Mobile electronics
Mobile hydraulics
Mobile hydraulics
FTS_Engineering FTS_Service_Support
FTS – Engineering FTS – Service &
support ff Introduction to the MPC/YM automation system Programmers, planners/application engineers
ff System operation, axis configuration and
p. 212 p. 213 axis operation DATE (GERMAN/ENGLISH) TRAINING LOCATION
ff Host/PC application development using the
Dates and training locations available on request
Automation and
Automation and
Industry 4.0
Industry 4.0
C application interface
TRAINING TIME
LEARNING TARGET
2 to 4 days:
ff Being familiar with the MPC/YM system
Please contact us for the exact number of days and
Electric drives
Electric drives
and controls
and controls
ff Being able to configure and control a motion axis
training times
ff Knowing how to program the host/PC application
software
PRICE
Tightening
systems
systems
(per day/participant)
ff Basics of Motion Control
ff Basics of Software Engineering and C/C++
NOTICE
technology
Welding
Welding
www.boschrexroth.com/training
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
@
FTS_Engineering FTS_Service_Support
FTS – Engineering FTS – Service & support
New training
New training
courses
courses
eDrive & Control
Academy
System (FTS), how to commission an FTS track and how to program the FTS components and software at production locations.
application with the FTS software interface.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff MPC/YM: Basics Dates and training locations available on request ff YM: Module replacement Dates and training locations available on request
ff General introduction to FTS carrier management ff User documentation
ff Requirements on mechanical design TRAINING TIME ff Installing/uninstalling software TRAINING TIME
ff Electrical instructions ff FTS for commissioning serial machines
3 to 5 days: 2 to 3 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
ff First commissioning ff Replacing sensors and coils
Please contact us for the exact number of days and Please contact us for the exact number of days and
ff IndraDrive FTS ff Troubleshooting and reporting errors
training times training times
ff Runtime Track Layout Changes
ff Carrier Position Adjustment LEARNING TARGET
PRICE PRICE
Electric drives
Electric drives
and controls
and controls
ff Knowing how to service FTS in the field
LEARNING TARGET €590.00 (net) / €702.10 (gross) €590.00 (net) / €702.10 (gross)
ff Being able to use MPC and FTS to diagnose
(per day/participant) (per day/participant)
ff Understanding the mechanical design problems
requirements when using FTS for machinery
NOTICE
ff Being familiar with specific FTS functions PREREQUISITE
Tightening
Tightening
systems
systems
ff Knowing how to commission the FTS You can find the current offer online at:
ff Basics of Motion Control
ff Knowing how to program the application software www.boschrexroth.com/training
ff Basics of Software Engineering and C/C++
PREREQUISITE
TARGET GROUP
technology
technology
Welding
Welding
ff Basics of Motion Control
Service technicians
ff Basics of Software Engineering and C/C++
TARGET GROUP
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Programmers, planners/application engineers
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
New training
courses
courses
PLC – IndraWorks/IndraLogic
courses
eDrive & Control
Academy
Academy
BASIC TRAINING INTERMEDIATE TRAINING
control technology. It is recommended for anyone who plans to attend
dd IndraWorks dd IndraWorks intermediate training courses. You will learn the concepts of electric control
(with IndraLogic 1G = (with IndraLogic 2G =
1st Generation) 2nd Generation)
technology and gain an insight into industrial applications.
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
5
eESTG1) EST-IW/IL 2G-Prog-ST
Basic knowledge Programming with
of electric control IndraWorks/IndraLogic CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
technology (eLearning) 2G in structured text
p. 215 p. 221 f Basic introduction to electric control technology Operators, service engineers, programmers,
f Programmable logic controls (PLC) planners/implementers, managers, trainers
3 5 3
ESTG-SPS-2G1) EST-IW/IL 2G-Prog EST-IW/IL 2G-SFC-DIAG f Computer numerical controls (CNC)
Basic knowledge Programming Sequencer
of PLC technology with IndraWorks/ diagnostics 2G
f Motion controls (MC) TRAINING TIME
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
Industry 4.0
(2nd generation) IndraLogic 2G f Robot controls (RC)
During the license term, the eLearning is available
p. 216 p. 220 p. 222 f Sample application and programming
at any time. The licensing period is 12 months after
1 5
f Interfaces
activation.
ESTG-SPS-2G EST-IW/IL
Advanced 2G-WinStudio
LEARNING TARGET
Electric drives
Electric drives
Electric drives
Intermediate knowledge Visualization with
and controls
and controls
and controls
of PLC technology WinStudio 2G Duration: approx. 3 to 4 hours
(2nd generation)
p. 217 p. 223 f Getting an overview of electric controls
f Being familiar with the different types of controls AVAILABLE LANGUAGES
4
ESTG-Ind-Ethernet
including their uses (PLC, CNC, etc.)
German, English
Basic knowledge of
f Gaining insight into programming a control and
Tightening
Tightening
Tightening
industrial ethernet
systems
systems
systems
its programming languages
PRICE
p. 218 f Knowing about interfaces from controls to humans
4
and machines (e.g. HMI or field bus systems) When you book the ESTG-SPS-2G training course you
ESTG-BUS f Being familiar with sample applications will receive a 12-month single license for the eESTG
technology
technology
technology
Basic knowledge of
eLearning course free of charge!
Welding
Welding
Welding
bus technology
PREREQUISITE
p. 219
€66.00 (net) / €78.54 (gross)
f Technical understanding
per year
f PC with Internet access
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
technology
technology
technology
f Email address for personal login
Price for multi-user licenses upon request
Pneumatics
Pneumatics
Pneumatics
Safety technology
Safety technology
Safety technology
1) W
hen you book the STG-SPS-2G training course you will receive a
@
NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
12-month single license for the eESTG eLearning course free of charge. @
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
216 Electric drives and controls Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Electric drives and controls 217
New training
courses
courses
(2nd generation) (2nd generation)
eDrive & Control
Academy
automation solutions in a practical way? This training is recommended for ESTG-SPS-2G course and wants to boost their confidence in using PLCs.
anybody who is considering working with control technology. In this training course, you will be taught more complex programming
techniques and additional diagnostic methods.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS DATES (GERMAN) TRAINING LOCATION
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Structure and function of PLCs ff Working with simple elements February 21, 2020 Erbach/Odenwald
ff Programming languages LD and ST February 18 - February 20, 2020 Erbach/Odenwald (pulses, times, counters) December 18, 2020 Erbach/Odenwald
ff Sequencer programming in SFC December 15 - December 17, 2020 Erbach/Odenwald ff More complex variable types, function blocks
ff Creating, loading and testing simple programs ff Simulation and signal recording TRAINING TIME
Automation and
Automation and
TRAINING TIME
Industry 4.0
Industry 4.0
ff Integrated visualization
1 day: 8:00 AM – 3:00 PM
LEARNING TARGET
3 days:
LEARNING TARGET
ff Obtaining basic PLC knowledge of integrating Day 1 10:00 AM – 4:30 PM PRICE
additional components (drives, bus systems, Day 2 8:00 AM – 4:30 PM ff Reinforcing and deepening programming
€590.00 (net) / €702.10 (gross)
Electric drives
Electric drives
and controls
and controls
visualizations, etc.) into one system Day 3 8:00 AM – 3:00 PM knowledge
ff Understanding the basic functioning and ff Forming a basis for further training courses on
connections of PLC technology PRICE this subject
ff For anyone who wants to boost their confidence
€1,440.00 (net) / €1,713.60 (gross)
in using PLCs and obtain additional knowledge, PREREQUISITE
Tightening
Tightening
systems
systems
the ESTG-SPS-2G Advanced training course is
ADVANCED TRAINING COURSES: Participants should have completed the
recommended after this course.
ESTG-SPS-2G basic course.
ESTG-SPS-2G Advanced
PREREQUISITE
TARGET GROUP
technology
technology
NOTICE
Welding
Welding
ff Technical understanding
Service technicians, programmers,
ff Basic knowledge of electrical engineering When you book the ESTG-SPS-2G training course you
planners/application engineers, managers, trainers
preferred will receive free of charge
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
ESTG-Ind-Ethernet ESTG-BUS
Basic knowledge of industrial ethernet Basic knowledge of bus technology
New training
New training
courses
courses
eDrive & Control
Academy
bus systems. Our training course teaches you basic knowledge of Ethernet will become familiar with the functions and options of the most important
and how to implement it in practical applications. field buses. Practical exercises and an outlook on Ethernet field buses
round out this course.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION ff Basic knowledge of communication LOCATION
ff Basic knowledge of network communication
ff Specifications on AS-i and PROFIBUS DP
ff Ethernet, Profinet IO, Sercos III basics January 28 - January 31, 2020 Erbach/Odenwald December 1 - December 4, 2020 Erbach/Odenwald
ff Installation and commissioning of simple systems
ff Project planning and commissioning of the November 17 - November 20, 2020 Erbach/Odenwald
ff Causes of errors, diagnostics and troubleshooting
networks TRAINING TIME
Automation and
Automation and
TRAINING TIME
Industry 4.0
Industry 4.0
ff Simple troubleshooting
LEARNING TARGET 4 days:
4 days: Day 1 10:00 AM – 4:30 PM
LEARNING TARGET ff Being familiar with most important field bus
Day 1 10:00 AM – 4:30 PM Days 2 and 3 8:00 AM – 4:30 PM
systems and being able to evaluate their use for
ff Understanding basic terms and correlations Days 2 and 3 8:00 AM – 4:30 PM Day 4 8:00 AM – 3:00 PM
different automation applications
Electric drives
Electric drives
and controls
and controls
ff Installing networks and testing the connections Day 4 8:00 AM – 3:00 PM
ff Being able to independently configure and
ff Addressing and configuring the participants PRICE
commission AS-i and PROFIBUS DP
ff Maintaining the networks PRICE
€1,770.00 (net) / €2,106.30 (gross)
€1,770.00 (net) / €2,106.30 (gross) PREREQUISITE
PREREQUISITE
Tightening
Tightening
NOTICE
systems
systems
ff Technical understanding
ff Technical understanding
ff Completion of the ESTG-SPS-2G training course You can find the current offer online at:
ff Completion of the ESTG-SPS-2G training
preferred www.boschrexroth.com/training
course preferred
technology
technology
TARGET GROUP
Welding
Welding
TARGET GROUP
Service technicians, programmers,
Service technicians, programmers,
planners/application engineers, managers, trainers
planners/application engineers, managers, trainers
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
2G in structured text
eDrive & Control
Academy
the IndraWorks engineering framework and the creation of PLC programs Text and the application of object-oriented language shares (OOP). It
within IndraWorks based on the integrated IndraLogic 2G programming addresses the use of user-specific data types, of one- and multi-dimensional
environment. It addresses the interaction of IndraWorks with different PLC fields and the commands available within ST. It also shows participants how
hydraulics
hydraulics
Industrial
Industrial
target systems. Using the IndraWorks engineering tool, application and to use standard functions from libraries and create libraries using examples.
programming options are implemented through practical exercises on Using the IndraWorks 2G engineering tool, the application and programming
machine models. options are implemented in ST and OOP through practical exercises.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP
ff Control settings CONTENTS PREREQUISITE
Automation and
Automation and
Industry 4.0
Industry 4.0
Service technicians, programmers,
ff Periphery bus connection – PROFIBUS,
planners/application engineers ff Programming in ST Completion of the EST-IW/IL 2G-Prog training course
PROFINET, Sercos III
ff Program structures in ST or comparable knowledge
ff Configuring a control system with IndraWorks
DATES (GERMAN) TRAINING ff Parameter transfer to functional blocks,
ff Program layout and program structures in
LOCATION functions and programs TARGET GROUP
Electric drives
Electric drives
and controls
and controls
IndraWorks
ff User-specific data structures
ff Programming languages IL, LD, FBD, SFC and ST March 9 - March 13, 2020 Erbach/Odenwald Service technicians, programmers,
ff Being able to create and use arrays
ff Data types June 15 - June 19, 2020 Erbach/Odenwald planners/application engineers
ff Object-oriented programming (OOP)
ff Instances September 21 - September 25, 2020 Erbach/Odenwald
ff Pointer variables (indirect addressing)
ff Libraries (repository, manager) November 23 - November 27, 2020 Erbach/Odenwald DATES (GERMAN) TRAINING
Tightening
Tightening
ff Creating libraries in IndraWorks 2G
systems
systems
ff Editors LOCATION
ff Applying and using standard libraries
ff Troubleshooting DATE (ENGLISH) TRAINING
ff Managing files with the SysLibfile library March 30 - April 3, 2020 Erbach/Odenwald
ff Practical exercises on the machine model LOCATION
ff Socket communication via UDP October 12 - October 16, 2020 Erbach/Odenwald
May 11 - May 15, 2020 Erbach/Odenwald
technology
technology
LEARNING TARGET
Welding
Welding
LEARNING TARGET DATE (ENGLISH) TRAINING
ff Being able to set up the IndraWorks TRAINING TIME LOCATION
ff Being familiar with the standard functions from
engineering tool
5 days: libraries and creating libraries June 22 - June 26, 2020 Erbach/Odenwald
ff Being able to create an I/O configuration
Linear motion
Linear motion
and assembly
and assembly
Day 1 10:00 AM – 4:30 PM ff Being able to create projects with IndraWorks 2G
technology
technology
ff Being able to create, load and test PLC programs
Days 2 to 4 8:00 AM – 4:30 PM ff Being able to create and use arrays TRAINING TIME
with IndraWorks
Day 5 8:00 AM – 1:00 PM ff Knowing how to use the ST programming
ff Knowing how to back up and restore project data 5 days:
language in programs to control systems and for
in IndraWorks Day 1 10:00 AM – 4:30 PM
PRICE data processing and data management within
Pneumatics
Pneumatics
Days 2 to 4 8:00 AM – 4:30 PM
a PLC application
PREREQUISITE €2,050.00 (net) / €2,439.50 (gross) Day 5 8:00 AM – 1:00 PM
Safety technology
EST-IW/IL 2G-Prog-ST €2,050.00 (net) / €2,439.50 (gross)
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
eDrive & Control
Academy
user messages on the Diagnostics screen. You will develop knowledge of WinStudio. Images and image groups will be created and animated using
sequencer technology with operating modes and diagnostic functions, and variables from the control systems. The various drivers for connecting to the
test your knowledge in practical exercises on machine models. control system will be addressed. You will learn about the ways to use
hydraulics
hydraulics
Industrial
Industrial
WinStudio through practical exercises.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff ProVi message system Service technicians, programmers, ff WinStudio/IndraWorks HMI Completion of the EST-IW/IL 2G-Prog training
ff Diagnostic screens on the HMI planners/application engineers ff Basic settings course or comparable knowledge
ff Sequencer programming ff PLC and MTX interfaces
ff SFC according to IEC61131 DATE (GERMAN/ENGLISH) TRAINING LOCATION ff Driver sheets TARGET GROUP
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Specific Rexroth extensions ff Managing and creating images
Dates and training locations available on request Service technicians, programmers,
ff Automatic diagnostics using function libraries ff Image control in WinStudio and IndraWorks
planners/application engineers
ff Specifying operating modes in the control word, Operation
TRAINING TIME
feedback in the status word ff Creating objects
DATES (GERMAN) TRAINING
ff Manual mode via the connected HMI 3 days: ff Knowing how to assign object properties
Electric drives
Electric drives
and controls
and controls
LOCATION
(operating screens) Day 1 10:00 AM – 4:30 PM ff Managing and displaying variables
ff Cycle-independent processing of special steps Day 2 8:00 AM – 4:30 PM ff Recipes, symbols (prototypes) May 4 - May 8, 2020 Erbach/Odenwald
(ON, OFF, GO) Day 3 8:00 AM – 3:00 PM ff Arithmetic sheets, alarm sheets, calendar sheets November 2 - November 6, 2020 Erbach/Odenwald
ff Tables, alarms
Tightening
Tightening
LEARNING TARGET PRICE ff Using script language (WinStudio, WinScript) TRAINING TIME
systems
systems
ff Overview of the command set for script language
ff Being able to write diagnosable sequencer €1,440.00 (net) / €1,713.60 (gross) 5 days:
programs Day 1 10:00 AM – 4:30 PM
LEARNING TARGET
ff Knowing how to test and optimize programs Days 2 to 4 8:00 AM – 4:30 PM
technology
technology
ff Knowing how to assign object properties Day 5 8:00 AM – 1:00 PM
Welding
Welding
PREREQUISITE ff Being able to program actions
ff Knowing how to integrate the WinStudio PRICE
ff Good knowledge of IEC 61131 IndraWorks/
application into IndraWorks Operation
IndraLogic €2,050.00 (net) / €2,439.50 (gross)
Linear motion
Linear motion
and assembly
and assembly
ff Being able to create a user-specific visualization
technology
technology
ff Completion of the EST-IW/IL 2G-Prog
ff Being able to utilize the possibilities of WinStudio
training course
in HMI applications
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
XLC/MLC
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
MLC or XLC system. This course teaches project planning of an entire system
dd For commissioning and project planning with the help of IndraWorks Engineering and Motion programming based on
AxisInterface. Additional topics expanding on this foundation include
hydraulics
hydraulics
Industrial
Industrial
diagnostics and troubleshooting of an entire system, using CamBuilder to
eESTG1)
Basic knowledge
of electric control
technology
(eLearning)
create electronic cam discs and using the GAT (Generic Application
p. 215
Template).
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
5 5
EST-IW/IL 2G-Prog EST-MLC-IP
Programming MLC – Commissioning
with IndraWorks/ and project planning
IndraLogic 2G
CONTENTS TARGET GROUP
p. 220 p. 225
Automation and
Automation and
Industry 4.0
Industry 4.0
5
ff Introduction to the XLC/MLC automation system Programmers, planners/application engineers
EAT-ID-Kompakt ff Engineering of the overall system using IndraWorks
IndraDrive with
multi-ethernet interface
– commissioning and axis
ff Sercos – The Automation Bus DATES (GERMAN) TRAINING
optimization V2 and safety
technology
ff Motion programming with AxisInterface and IMC LOCATION
p. 205
ff Backing up and restoring data
Electric drives
Electric drives
and controls
and controls
February 10 - February 14, 2020 Erbach/Odenwald
ff Synchronous operating types
May 11 - May 15, 2020 Erbach/Odenwald
ff Electronic cam discs and CamBuilder
August 24 - August 28, 2020 Erbach/Odenwald
ff Generic Application Template
dd For service personnel
DATE (ENGLISH) TRAINING
Tightening
Tightening
3 4
LEARNING TARGET
systems
systems
EAT-ID-I EST-MLC-I LOCATION
IndraDrive – Diagnostics MLC – Maintenance
and servicing ff Getting to know the MLC system and its
June 15 - June 19, 2020 Erbach/Odenwald
components
p. 203 p. 226 December 7 - December 11, 2020 Erbach/Odenwald
ff Learning how to use IndraWorks for project
technology
technology
planning and diagnostics
Welding
Welding
TRAINING TIME
ff Knowing about motion programming based on
AxisInterface 5 days:
dd For anyone who wants to learn about Open Core Interface ff Being able to create drive and control cam discs Day 1 10:00 AM – 4:30 PM
Linear motion
Linear motion
and assembly
and assembly
with CamBuilder Days 2 to 4 8:00 AM – 4:30 PM
technology
technology
ff Knowing how to archive and restore project data Day 5 8:00 AM – 1:00 PM
2
EST-XLC/
in IndraWorks
MLC-OCI-EASY
Introduction to open
PRICE
core engineering PREREQUISITE
Pneumatics
Pneumatics
€2,050.00 (net) / €2,439.50 (gross)
p. 228
2
ff Basic knowledge of control technology
ESTG-OCI
Basics of open core ff Completion of the EAT-ID-Sercos and EST-IW/IL
engineering
2G-Prog training courses or comparable knowledge
Safety technology
Safety technology
p. 227
3
EST-XLC/
MLC-OCI-WIN
Windows programming
with open core
interface
@
NEU LW
Energy efficiency
Energy efficiency
p. 229 @
EST-MLC-I ESTG-OCI
MLC – Maintenance Basics of open core engineering
New training
New training
courses
courses
eDrive & Control
Academy
maintaining the entire MLC or XLC systems in conjunction with the of modern high-level language-based applications and IT-based
IndraDrive drive system. technologies. For the first time, the previously separate worlds of PLC and
IT automation are ideally joined in an integrated engineering portfolio. This
hydraulics
hydraulics
Industrial
Industrial
course teaches the background and benefits of Open Core Engineering.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
ff Introduction to the XLC/MLC automation system Service technicians
ff Overview of the IndraDrive drive family ff What is Open Core Engineering and what is the Dates and training locations available on request
ff Maintenance and diagnosis of the overall system DATES (GERMAN) TRAINING Open Core Interface (OCI)?
using IndraWorks LOCATION ff What kinds of applications are in the spotlight? TRAINING TIME
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Sercos – The Automation Bus ff What applications have already been
April 21 - April 24, 2020 Erbach/Odenwald 2 days:
ff Motion programming with AxisInterface and IMC implemented?
November 10 - November 13, 2020 Erbach/Odenwald Day 1 10:00 AM – 5:00 PM
ff Backing up and restoring data ff Practical demonstrations
Day 2 8:30 AM – 3:00 PM
TRAINING TIME
LEARNING TARGET LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
PRICE
4 days:
ff Getting to know the MLC/XLC system and its ff Knowing the background of Open Core
Day 1 10:00 AM – 4:30 PM €799.00 (net) / €950.81 (gross)
components Engineering
Days 2 and 3 8:00 AM – 4:30 PM
ff Becoming familiar with the IndraDrive drive family ff Being able to classify the Open Core Interface in
Day 4 8:00 AM – 3:00 PM ADVANCED TRAINING COURSES
ff Knowing how to use IndraWorks for full system Open Core Engineering
Tightening
Tightening
systems
systems
diagnostics ff Knowing the functions of the Open Core Interface EST-XLC/MLC-OCI-EASY, EST-XLC/MLC-OCI-WIN
PRICE
ff Knowing how to replace drive components ff Recognizing potential areas of use
ff Knowing the basics of motion programming with €1,770.00 (net) / €2,106.30 (gross) NOTICE
AxisInterface PREREQUISITE
This training course is not primarily intended for
technology
technology
ff Knowing how to archive and restore project data ADVANCED TRAINING COURSES
Welding
Welding
Interest in Open Core Engineering and Open Core high-level language programmers and only depicts
in IndraWorks
EAT-ID-I Interface the use of development environments for exemplary
purposes.
PREREQUISITE
TARGET GROUP
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Basic knowledge of control technology
Planners/application engineers, managers and
ff Completion of the EAT-ID-I training course or
trainers
comparable knowledge
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-XLC/MLC-OCI-EASY EST-XLC/MLC-OCI-WIN
Introduction to open core interface Windows programming with
New training
New training
courses
courses
open core interface
eDrive & Control
Academy
Open Core Interface. The course delves into the subject by using simple based on Open Core Interface (OCI). After an overview of the possibilities
exercises with Microsoft Office Tools based on VBA. You will complete the of Open Core Interface, you will use practical programming examples to
exercises with real training devices (XLC and MLC). independently work out the core steps for using the OCI in Windows.
hydraulics
hydraulics
Industrial
Industrial
All exercises will be completed with real training devices (XLC and MLC).
The Visual Studio projects created during the exercises can also be
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION reproduced after the course with Visual Studio Express.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Overview of OCI Dates and training locations available on request
ff Installing SDK
ff OCI documentation TRAINING TIME
CONTENTS DATE (GERMAN/ENGLISH) TRAINING LOCATION
ff Using OCI in Excel
2 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Introduction to the toolbox Dates and training locations available on request
Day 1 10:00 AM – 4:30 PM
LEARNING TARGET ff Installing SDK
Day 2 8:00 AM – 3:00 PM
ff Overview of OCI TRAINING TIME
ff Recognizing the possible uses of OCI
ff Existing libraries
ff Being able to read diagnostic information, PRICE 3 days
ff OCI documentation
Electric drives
Electric drives
and controls
and controls
parameters, etc. using Excel Day 1 10:00 AM – 4:30 PM
€1,020.00 (net) / €1,213.80 (gross) ff OCI user management
Day 2 8:00 AM – 4:30 PM
ff Programming examples in C# and programming
PREREQUISITE Day 3 8:00 AM – 3:00 PM
NOTICE exercises
ff Basic programming skills
You can find the current offer online at: PRICE
Tightening
Tightening
ff Knowledge of XLC or MLC LEARNING TARGET
systems
systems
www.boschrexroth.com/training
ff Knowledge of Microsoft Office tools €1,440.00 (net) / €1,713.60 (gross)
ff You can create Windows programs in C# in order to
-- Collect diagnostic data
TARGET GROUP NOTICE
-- Command axes
technology
technology
Service technicians and planners/application -- Create your own HMI applications You can find the current offer online at:
Welding
Welding
engineers www.boschrexroth.com/training
PREREQUISITE
Linear motion
and assembly
and assembly
technology
technology
ff Knowledge of XLC or MLC
TARGET GROUP
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
eDrive & Control
Academy
The training system includes all components that are
used in conjunction with the IndraMotion MLC
system solution.
hydraulics
hydraulics
Industrial
Industrial
The basic unit consists of control (IndraControl L75,
incl. MLC firmware), an IndraDrive Cs,
a IndraDyn MSK30 motor, as well as a Sercos bus
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
coupler with inline I/Os.
Automation and
Industry 4.0
Industry 4.0
The training system can also be extended with the
optional SafeLogic or SafeLogic compact modules to
demonstrate the interaction of IndraDrive Safety on
Electric drives
Electric drives
Board (SafeMotion S4), secure peripherals, and the
and controls
and controls
security controls of Bosch Rexroth.
Tightening
systems
systems
(SafeLogic compact).
technology
Welding
Welding
Operation with an FI circuit breaker, however, is not
possible!
Linear motion
and assembly
and assembly
technology
technology
Please contact us, we would be happy to
advise you!
Pneumatics
Pneumatics
Material number
R911337312 Base unit
R911342536 SafeLogic compact Module
R911342537 SafeLogic Module
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
232 Electric drives and controls Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Electric drives and controls 233
Learning path
New training
New training
courses
courses
MTX CNC system
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING BASIC TRAINING INTERMEDIATE TRAINING
dd Service and maintenance personnel dd Commissioning engineers and project engineers (with Sercos III, L65 – 2G = 2nd Generation)
5 3 3 5 5 5 5
hydraulics
hydraulics
EAT-ID-Kompakt
Industrial
Industrial
EST-MTX-BedProg EAT-ID-I EST-MTX-I EST-MTX-BedProg IndraDrive with multi- EST-MTX-InProj 2G EST-MTX/IL 2G-Prog
Basic NC programming IndraDrive – Diagnostics Maintaining and Basic NC programming ethernet interface Commissioning and Programming with
with Rexroth standard and servicing servicing the MTX with Rexroth standard – Commissioning and project planning of the IndraLogic 2G
user interface system with Sercos II user interface axis optimization V2 and MTX CNC system with
and Sercos III safety technology Sercos III
p. 239 p. 203 p. 237 p. 239 p. 205 p. 236 p. 235
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
3 3 5
ESTG-SPS-2G2) ESTG-SPS-2G2) EST-IW/IL
Basic knowledge Basic knowledge 2G-WinStudio
of PLC technology of PLC technology Visualizing with
(2nd generation) (2nd generation) WinStudio
Automation and
Industry 4.0
Industry 4.0
3
EATG-11)
dd Operators and programmers Basic knowledge
of electric drive
2 2 technology
ESTG-CNC EST-MTX-Bed
p. 202
Electric drives
Electric drives
Basic knowledge of Operation with Rexroth
and controls
and controls
CNC technology standard user interface
eEATG1)
p. 234 p. 238 Basic knowledge
of electric drive
technology
5 (eLearning)
EST-MTX-BedProg p. 201
Tightening
Tightening
Basic NC programming
systems
systems
with Rexroth standard
user interface
p. 239
dd Optimizing and increasing availability
5 2
technology
technology
Welding
Welding
EST-MTX-BedProg EST-MTX-CTA
Basic NC programming MTX Cycle Time
with Rexroth Analyzer
standard user interface
p. 239 p. 240
Linear motion
Linear motion
and assembly
and assembly
technology
technology
3
EST-MTX-EWB
MTX efficiency
Workbench
p. 241
Pneumatics
Pneumatics
Safety technology
Safety technology
1) W
hen you book the EATG-1 training course you will receive a
12-month single license for the eEATG eLearning course free of charge.
2) W
hen you book the ESTG-SPS-2G training course you will receive a
12-month single license for the eESTG eLearning course free of charge.
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
234 Electric drives and controls Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Electric drives and controls 235
New training
courses
courses
eDrive & Control
Academy
know the set-up and function of numeric controls. Practical examples are with the MTX CNC control and configure all necessary periphery
used to reinforce and consolidate what is learned. components. You will learn to understand the functions of the PLC basic
program. The machine control functions will then be extended and modified.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS PREREQUISITE CONTENTS PREREQUISITE
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Milestones of NC development Technical understanding ff Introduction to the MTX CNC system Completion of the EST-MTX-InProj 2G training course
ff Interaction of CNC, drive and machine ff System layout and hardware components of the or comparable knowledge
ff Structure and operation of CNC control systems DATES (GERMAN) TRAINING LOCATION MTX CNC system
ff Control loop CNC/drive ff Configuring IndraMotion MTX with IndraWorks TARGET GROUP
May 19 - May 20, 2020 Erbach/Odenwald
Automation and
Automation and
-- Project structure
Industry 4.0
Industry 4.0
ff Drives, bus systems, interfaces
Programmers, planners/application engineers ,
ff Reference points, coordinate systems -- I/O configuration
Please contact us for more dates and individual service technicians
ff Operation, operating panel, screen displays -- NC/PLC interface
training courses. Training in English available on -- MZA
ff Operating modes, dialog boxes, adjustment
request. We would be happy to help you. DATE (GERMAN/ENGLISH) TRAINING
signals, corrections ff HMI adjustment (M keys, machine operating panel)
Electric drives
Electric drives
LOCATION
and controls
and controls
ff Programming CNC machines, backing up data ff MZA machine status display
TARGET GROUP ff ProVi message system February 3 - February 7, 2020 Erbach/Odenwald
ff Introduction to DIN and CPL programming
ff Processing simple NC parts programs Operators, service technicians, planners/application ff Exchanging data via the NC/PLC interface July 13 - July 17, 2020 Erbach/Odenwald
ff Practical exercises on MTX controls and engineers, managers, trainers ff Knowing how to use the help functions September 21 - September 25, 2020 Erbach/Odenwald
ff Using MTX function modules (reading NC data, November 9 - November 13, 2020 Erbach/Odenwald
Tightening
Tightening
IndraDrive drives
systems
systems
selecting programs, etc.)
TRAINING TIME
ff Accessing system data and permanent CPL TRAINING TIME
LEARNING TARGET
2 days: variables
ff Learning the basics of working with CNC control Day 1 10:00 AM – 4:30 PM 5 days:
Day 1 10:00 AM – 4:30 PM
technology
technology
systems Day 2 8:00 AM – 3:00 PM
Welding
Welding
LEARNING TARGET
Days 2 to 4 8:00 AM – 4:30 PM
ff Gaining basic knowledge of the structure and
ff Learning the system layout and hardware Day 5 8:00 AM – 3:00 PM
function of numerical controls and their PRICE
components of the MTX CNC system
components
€1,020.00 (net) / €1,213.80 (gross) ff Being able to configure the MTX CNC system in PRICE
Linear motion
Linear motion
and assembly
and assembly
ff Being familiar with the structure and function of
technology
technology
IndraWorks, incl. I/O configuration
machine tools €2,050.00 (net) / €2,439.50 (gross)
NOTICE ff Knowing how to program with the IEC languages
ff Learning about using a milling machine with
LD, FBD and ST
IndraMotion MTX as an example You can find the current offer online at: NOTICE
ff Knowing how to use the NC/PLC interface for
ff Completing a practical test on the exercise www.boschrexroth.com/training
channels, axes and spindles
Pneumatics
Pneumatics
You can find the current offer online at:
contents on the machine tool model
ff Being familiar with errors, warnings and www.boschrexroth.com/training
instructions with MZA and/or ProVi
ff Knowing how to use the help functions
Safety technology
Safety technology
ff Being able to use function modules for accessing
NC data, system variables and permanent
CPL variables
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-MTX-InProj 2G EST-MTX-I
Commissioning and project planning of the Maintaining and servicing the MTX system with
New training
New training
courses
courses
MTX CNC system with Sercos III Sercos II and Sercos III
eDrive & Control
Academy
(with Sercos III). The interaction between the various components necessary to servicing and maintaining the entire MTX CNC system.
(NC, PLC, HMI and drives) will be extensively discussed. Both Generation 1 and 2 control systems will be discussed.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Overview of hardware and software components Service technicians, planners/application engineers ff Overview of hardware and software components
ff Relationships between HMI/CNC/PLC and drives ff Relationships between HMI/CNC/PLC and drives March 10 - March 12, 2020 Erbach/Odenwald
ff Operating the standard user interface DATES (GERMAN) TRAINING ff Operating the standard user interface June 16 - June 18, 2020 Erbach/Odenwald
ff Basics of CNC programming LOCATION ff MTX directory structure September 15 - September 17, 2020 Erbach/Odenwald
Automation and
Automation and
Industry 4.0
Industry 4.0
ff MTX directory structure (data organization) ff Sercos drive interface (diagnostics) December 8 - December 10, 2020 Erbach/Odenwald
February 10 - February 14, 2020 Erbach/Odenwald
ff CNC/PLC interface ff IndraDrive (diagnostics, backing up data)
March 30 - April 3, 2020 Erbach/Odenwald
ff Sercos interface (start-up phases, Sercos files) ff IndraWorks engineering (archiving and restoring Please contact us for more dates and individual
August 17 - August 21, 2020 Erbach/Odenwald
ff IndraDrive (diagnostics, backing up data) projects, machine parameters, PLC, logbooks) training courses. Training in English available on
October 12 - October 16, 2020 Erbach/Odenwald
ff IndraWorks engineering ff Securing the hard drive request. We would be happy to help you.
Electric drives
Electric drives
and controls
and controls
ff Motion (machine parameters, PLC, interface ff Oscilloscope
Please contact us for more dates and individual
configuration, IndraDrive, HMI screens, F, OP, TRAINING TIME
training courses. Training in English available on
M panels, logbooks) LEARNING TARGET
request. We would be happy to help you. 3 days:
ff Archiving and restoring projects
ff Knowing how to service the MTX system Day 1 10:00 AM – 4:30 PM
Tightening
Tightening
systems
systems
TRAINING TIME ff Being able to conduct targeted troubleshooting Day 2 8:00 AM – 4:30 PM
LEARNING TARGET
Day 3 8:00 AM – 3:00 PM
5 days:
ff Being able to extend and modify an existing PREREQUISITE
Day 1 10:00 AM – 4:30 PM
project PRICE
Days 2 to 4 8:00 AM – 4:30 PM ff Completion of the EAT-ID-I, EST-MTX-BedProg
technology
technology
ff Knowing how to configure and start up the
Welding
Welding
Day 5 8:00 AM – 1:00 PM and ESTG-SPS-2G training courses or €1,440.00 (net) / €1,713.60 (gross)
MTX CNC system
comparable knowledge
ff Being able to back up and restore data
PRICE ff Basic knowledge of Windows ADVANCED TRAINING COURSES
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE €2,050.00 (net) / €2,439.50 (gross) EST-MTX-IL 2G-Prog, EST-IW/IL 2G-WinStudio
technology
technology
TARGET GROUP
ff Completion of the EAT-ID-Kompakt and
NOTICE Service technicians NOTICE
EST-IW/IL2G-Prog training courses or comparable
knowledge You can find the current offer online at: You can find the current offer online at:
Pneumatics
Pneumatics
ff Basic knowledge of Windows www.boschrexroth.com/training www.boschrexroth.com/training
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-MTX-Bed EST-MTX-BedProg
Operation with Rexroth standard user interface Basic NC programming with Rexroth
New training
New training
courses
courses
standard user interface
eDrive & Control
Academy
exercises on a control system with a connected machine tool model in structure and programming. They will have the opportunity to process and
small groups. analyze exercises on a control system with a connected machine tool model.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Overview of the MTX hardware ff Overview of the MTX hardware
ff MTX operation, operating modes, memory set-up ff MTX operation, operating modes, memory set-up January 20 - January 24, 2020 Erbach/Odenwald
ff MTX programming types, syntax, incl. examples ff MTX programming types, syntax, incl. examples May 25 - May 29, 2020 Erbach/Odenwald
ff Operation and visualization ff Zero shift, incl. tables, setting positions, etc. November 23 - November 27, 2020 Erbach/Odenwald
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Zero shift, incl. tables ff Tool correction with all correction tables and
ff Subroutine technologies with their calls their processing Please contact us for more dates and individual
ff Program corrections ff Subroutine technologies and their calls training courses. Training in English available on
ff NC cycles with graphic/dialog support ff NC cycles with graphic/dialog support request. We would be happy to help you.
ff Introduction to CPL programming ff Variable processing (local, global, permanent,
Electric drives
Electric drives
and controls
and controls
ff Help definable-permanent and SD variables) TRAINING TIME
ff Practical examples ff Many practical programming examples
DATES (GERMAN) TRAINING 5 days:
LOCATION Day 1 10:00 AM – 4:30 PM
LEARNING TARGET LEARNING TARGET
Days 2 to 4 8:00 AM – 4:30 PM
Tightening
Tightening
January 20 - January 21, 2020 Erbach/Odenwald
systems
systems
ff Being able to operate MTX ff Being able to use DIN and CPL programming Day 5 8:00 AM – 1:00 PM
May 25 - May 26, 2020 Erbach/Odenwald
ff Being familiar with memory and program ff Being able to independently make program
November 23 - November 24, 2020 Erbach/Odenwald
structures in DIN and CPL corrections PRICE
ff Being able to independently make program ff Being able to create and call subroutines
Please contact us for more dates and individual €2,050.00 (net) / €2,439.50 (gross)
technology
technology
corrections
Welding
Welding
training courses. Training in English available on
PREREQUISITE
request. We would be happy to help you. ADVANCED TRAINING COURSES
PREREQUISITE
Completion of the ESTG-CNC seminar or comparable
EST-MTX-InProj 2G, EST-MTX/IL 2G-Prog,
Completion of the ESTG-CNC training course or TRAINING TIME knowledge
Linear motion
Linear motion
and assembly
and assembly
EST-IW/IL 2G-WinStudio
technology
technology
comparable knowledge
2 days:
TARGET GROUP
Day 1 10:00 AM – 4:30 PM NOTICE
TARGET GROUP
Day 2 8:00 AM – 3:00 PM Operators, service technicians, programmers
You can find the current offer online at:
Operators, service technicians, programmers
Pneumatics
Pneumatics
www.boschrexroth.com/training
PRICE
Safety technology
NOTICE
Energy efficiency
@ @
EST-MTX-CTA EST-MTX-EWB
MTX Cycle time analyzer MTX Efficiency workbench
New training
New training
courses
courses
eDrive & Control
Academy
Workbench. With the aid of the CTA, complex operations on machine tools MTX Efficiency Workbench. This training course not only deals with the
are manageable, optimization potential in NC programs and process variables cycle time analyzer to optimize cycle time and productivity, but also focuses
are quickly and easily identified, cycle times are reduced, and productivity is on the functions for optimizing media consumption.
hydraulics
hydraulics
Industrial
Industrial
increased. This training course shows you how to work with the CTA.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Concept of the MTX CTA ff Concept of the MTX Efficiency Workbench Dates and training locations available on request
ff Overview and explanation of the individual ff Overview and explanation of the individual
analysis functions analysis functions TRAINING TIME
ff Commissioning the MTX Efficiency Workbench ff Commissioning the MTX Efficiency Workbench
3 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Taking a recording ff Taking a recording
Day 1 10:00 AM – 4:30 PM
ff Analysis and interpretation of a recording to ff Analysis and interpretation of a recording to
Day 2 8:00 AM – 4:30 PM
optimize the cycle time optimize the cycle time
Day 3 8:00 AM – 3:00 PM
ff Analysis and interpretation of a recording to
LEARNING TARGET analyze the media consumption
Electric drives
Electric drives
and controls
and controls
PRICE
ff Practical sample applications
ff Knowing the advantages and application
€1,440.00 (net) / €1,713.60 (gross)
possibilities of the MTX Efficiency Workbench for
LEARNING TARGET
cycle time optimization
NOTICE
ff Being able to commission the software ff Knowing the advantages and possible uses of the
Tightening
Tightening
systems
systems
ff Being able to optimize the cycle time using EWB MTX Efficiency Workbench for cycle time and You can find the current offer online at:
energy optimization www.boschrexroth.com/training
DATE (GERMAN/ENGLISH) TRAINING LOCATION
PREREQUISITE ff Being able to commission the software
Dates and training locations available on request ff Being able to optimize the cycle time and media
ff Basic knowledge of control technology
technology
technology
consumption using EWB
Welding
Welding
ff Completion of the EST-MTX-BedProg training
TRAINING TIME
course or comparable knowledge
PREREQUISITE
2 days:
TARGET GROUP Day 1 10:00 AM – 4:30 PM ff Basic knowledge of control technology
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Day 2 8:00 AM – 3:00 PM ff Completion of the EST-MTX-BedProg training
Operators, service technicians, programmers,
course or comparable knowledge
planners/application engineers
PRICE
TARGET GROUP
€1,020.00 (net) / €1,213.80 (gross)
Pneumatics
Pneumatics
Service technicians and planners/application
NOTICE engineers
Safety technology
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
Motion logic (drive-based) – MLD
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
This training system is ideal for getting acquainted
with NC technology and for imparting practical
3 5 3
knowledge in the field of NC technology and machine ESTG-SPS-2G1) EST-IW/IL 2G-Prog EAT-ID MLDS/MLDM
Basic knowledge Programming 2G-Prog
tools using components used in the industrial sector.
hydraulics
hydraulics
Industrial
Industrial
of PLC technology with IndraWorks/ Programming MLD-S
(2nd generation) IndraLogic 2G and MLD-M 2G
Mobile electronics
Mobile hydraulics
Mobile hydraulics
EAT-ID-Kompakt
IndraDrive with
multi-ethernet interface
Module_2 supplements the training system with the – Commissioning and
axis optimization V2 and
axis model, including three axes with the following safety technology
p. 205
components:
- Electric drives (IndraDrive Cs)
Automation and
Automation and
Industry 4.0
Industry 4.0
- Motors (IndraDyn MS2N)
- MTX performance L75 NC control
Electric drives
commissioning, operation, programming and
and controls
and controls
2
maintenance can be explained clearly. EST-IoT-Gateway
Application of the
IoT gateway
Replacing the MTX firmware with the MLC firmware
makes the training system suitable for MLC p. 245
216
Tightening
Tightening
systems
systems
applications such as Robot Control.
technology
Welding
Welding
Operation with an FI circuit breaker, however,
is not possible!
Linear motion
and assembly
and assembly
technology
technology
Please contact us, we would be happy to
advise you!
Pneumatics
Pneumatics
Material number
R911342540 Complete device
Safety technology
Safety technology
1) W
hen you book the ESTG-SPS-1G or ESTG-SPS-2G training course
you will receive a 12-month single license for the eESTG eLearning
Energy efficiency
Energy efficiency
course free of charge.
New training
courses
courses
eDrive & Control
Academy
familiar with MLD-S and MLD-M from the function and the properties of the Insights as well as how to implement sensor technology and controls
PLC drive to programming according to IEC61131-3 and communication quickly and easily. Further topics are the connection to systems such as
with other axes. Cloud services, databases or MES, the recognition of use cases and user
hydraulics
hydraulics
Industrial
Industrial
benefits as well as the implementation of solutions.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION LOCATION
ff MLD basics at one axis ff Hardware and interfaces of the IoT Gateways
ff I/O access March 3 - March 5, 2020 Lohr am Main ff Connection of the sensor technology May 26 - May 27, 2020 Lohr am Main
ff Parameter access via direct variables and September 8 - September 10, 2020 Lohr am Main ff Configuration and function of IoT Insights November 24 - November 25, 2020 Lohr am Main
functional blocks ff Analysis and assessment of signals, threshold
Automation and
Automation and
TRAINING TIME
Industry 4.0
Industry 4.0
ff Parameter access via parameter channel Please contact us for more dates and individual values and warnings
ff Parameter access via free PLC parameters training courses. Training in English available on ff Possible applications and getting to know the
2 days:
ff Parameter access via real-time channel request. We would be happy to help you. customer value
Day 1 10:00 AM – 4:30 PM
ff Parameter access via motion command channel
Day 2 8:00 AM – 3:30 PM
ff MLD-M: Setting the MLD-M system mode TRAINING TIME LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
ff I/O access to slave axes (CCD configuration)
3 days: ff Configuring and commissioning IoT Gateway and PRICE
ff AxisData structure
Day 1 10:00 AM – 4:30 PM IoT Insight independently
ff Parameter access to slave axes €1,020.00 (net) / €1,213.80 (gross)
Day 2 8:00 AM – 4:30 PM ff Integrating sensor technology and the
ff Control of two axes by virtual master axis
Day 3 8:00 AM – 3:00 PM user-specific Insights configuration quickly
Tightening
Tightening
ADVANCED TRAINING COURSES
systems
systems
ff Recognizing use cases independently and
LEARNING TARGET
PRICE implementing the application Individual workshop for use case design
ff Being able to read and write drive parameters
€1,440.00 (net) / €1,713.60 (gross)
ff Knowing how to use library modules TARGET GROUP
technology
technology
ff Being able to read, modify and write PLC programs
Welding
Welding
Service technicians, programmers,
planners/application engineers, managers
PREREQUISITE
Linear motion
and assembly
and assembly
technology
technology
ff Completion of the EST-IW/IL 2G-Prog and
EAT-ID-Kompakt training courses
TARGET GROUP
Pneumatics
Pneumatics
Service technicians, programmers,
planners/application engineers
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
i4.0 Training system starter kit Electric drives and controls special training
New training
New training
courses
courses
eDrive & Control
Academy
With this training system, it is easy to take the first No problem: We are happy to offer training courses on specific products
steps towards i4.0. beyond our training program. The following is a list of some examples.
The installed sensor technology can be used to
hydraulics
hydraulics
Industrial
Industrial
collect various machine data, e.g. temperature,
acceleration, vibration and other environmental
influences. The recorded data is visualized and PRINTING AND PACKAGING TECHNOLOGY DRIVE TECHNOLOGY
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
assessed with the integrated "IoT Insights" software
Synax-P Synax V13 EAT-ID-SERCOS IndraDrive with Sercos
The following components are included: Programming Logics/Field bus Interface – Commissioning
ff Power supply unit Synax-S Synax V13 and Axis Optimization 1G
ff XM22 control System, Troubleshooting EAT-ID-PROFI IndraDrive with PROFIBUS
Automation and
Automation and
Industry 4.0
Industry 4.0
ff PR21 IoT Gateway VM-S VisualMotion 10/11 Interface – Commissioning
ff MKK 040 linear module with MSM019B motor and System, Troubleshooting and Axis Optimization V1
electric IndraDrive Cs drive VM-P VisualMotion 10/11 EAT-ID-Si IndraDrive – Drive-Integrated
ff CISS IoT sensor Programming Safety Technology L2/S2
VM-U VisualMotion 10/11 EAT-Eco_Analog-I EcoDrive03 DKC01.3 DKC11.3,
Electric drives
Electric drives
ff Software package IoT Insights
and controls
and controls
Update SMT Firmware
Training courses for employees, preparations of Analog and Parallel Interface
applications as well as the structure and the MACHINE TOOLS EAT-Eco_Sercos-I EcoDrive03 DKC01.3
commissioning of Cloud solutions can be carried out DKC11.3, SMT Firmware
MTCV23-IH MTC200 V22/23
Tightening
Tightening
Sercos Interface
systems
systems
with this training system. Compact Maintenance Course
EAT-Eco_Profi-I EcoDrive03 DKC03.3,
MTAV23-IH MTA200 V23
Connection to a Schuko plug socket FGP Firmware
Compact Maintenance Course
(AC 230 V ±10 %, 16 A, 50-60 Hz). Operation with PROFIBUS Interface
MTC200V23-NC MTC 200 Version 22/23
EAT-Eco_Inter-I EcoDrive03 DKC04.3,
technology
technology
RCCB not possible! NC Programming
Welding
Welding
FGP Firmware Interbus
MTC200V23-B MTC 200 Version 22/23
ff Are you interested in our training systems? Interface
Compact Operation Course
Please contact us, we would be happy to EAT-DIAX_SERCOS-I DIAX04 with Sercos
MTA200V23-SG MTA 200 Version 23
advise you! Interface – Diagnostics and
Linear motion
Linear motion
and assembly
and assembly
System and Basic Course
technology
technology
Servicing
EST-MTX-InProj 1G Commissioning and Project
EAT-RD500SFT-I RD500 Rexroth Frequency
Planning of IndraMotion
Material number Converter, SFT – Sinus
MTX 1G
R911398608 Complete device Frontend Technology
EST-MTX/IL 1G-Prog Programming with
Pneumatics
Pneumatics
EAT-RD500RD51/52-I Rexroth Frequency Converter
IndraLogic 1G
RD500 – Service Training
RD51/RD52
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
248 Electric drives and controls Training Program 2020 | Drive & Control Academy
New training
courses
eDrive & Control
Academy
hydraulics
Industrial
ESTG-SPS-1G Basic Knowledge of PLC Are you interested in one of these training courses?
Technology (1st Generation) Please contact us, we would be happy to advise you.
CL-S CL300, CL400, CL500 Are you looking for a different product? We will be
Maintenance and happy to provide you an offer for special training
Automation and
Industry 4.0
IndraWorks/IndraLogic 1G
EST-IW/IL 1G-Proj PLC Project Planning with
IndraWorks/IndraLogic 1G
EST-IW/IL 1G ->2G Transitioning from
Tightening
IndraWorks/IndraLogic 1G to
systems
IndraLogic 2G
MOTIONLOGIC (DRIVE-BASED) –
INDRAMOTION MLD
technology
Welding
MISCELLANEOUS
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design
Mechanical engineers Commissioning Proprietors
eLearning engineers
Electricians engineers Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
BASIC TRAINING
253 ESTG-T Basic knowledge of tightening systems ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
254 EST-Sys300 Sys350 SE350 Tightening system – Transition course (CS351 compact system and 350 multichannel system) ● ● ● ●
350 Tightening system – Hardware, commissioning, programming
255 EST-Sys350-I-Prog (single channel and multichannel system) ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
Electric drives
Electric drives
and controls
and controls
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
252 Tightening systems Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Tightening systems 253
New training
courses
courses
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
The variables influencing a screw connection are illustrated using simple
2 3 and real tightening processes.
ESTG-T EST-Sys300 Sys350
Basic knowledge of SE350 Tightening system
hydraulics
hydraulics
tightening systems – Transition course
Industrial
Industrial
(CS351 compact system and
350 multichannel system)
p. 253 p. 254
5
CONTENTS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
EST-Sys350-I-Prog
350 Tightening system –
Hardware, commissioning,
programming
ff Requirements of screw connections and
(single channel and
multichannel system)
tightening systems
p. 255
ff Structure and function of different tightening
3
systems
Automation and
Automation and
Industry 4.0
Industry 4.0
EST-CS351-I-Prog ff Standards and guidelines in industrial screw
CS351 Tightening system
(single-channel system)
assembly
ff Creating simple tightening programs on the
p. 256
training simulator
Electric drives
Electric drives
2
and controls
and controls
EST-Nexo-I-Prog
Nexo measuring cordless
screwdriver
LEARNING TARGET DATES (GERMAN) LOCATION
p. 257 ff Learning the requirements and factors for February 11 - February 12, 2020 Murrhardt
industrial screw assembly May 5 - May 6, 2020 Murrhardt
Tightening
Tightening
systems
systems
ff Understanding the structure and function of September 8 - September 9, 2020 Murrhardt
electro-hydraulic components
ff Understanding different tightening procedures Please contact us for more dates and individual
and processes training courses. Training in English available on
technology
technology
ff Being able to select tightening systems based on request. We would be happy to help you.
Welding
Welding
existing standards and guidelines in everyday
practice TRAINING TIME
2 days:
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE
technology
technology
Day 1 10:00 AM – 4:30 PM
Technical understanding Day 2 8:00 AM – 3:00 PM
Pneumatics
Operators, service engineers, programmers, €1,020.00 (net) / €1,213.80 (gross)
planners/implementers, managers, trainers
ADVANCED TRAINING COURSES
Safety technology
Safety technology
EST-Sys350-I-Prog, EST-CS351-I-Prog,
EST-Nexo-I-Prog
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
(CS351 Compact system and commissioning, programming (single channel
350 Multichannel system) and multichannel system)
eDrive & Control
Academy
During this training course, participants will be shown the differences You will become familiar with the hardware of the 350 modular tightening
between the 350 and 300/310 tightening systems. In a practice section, system and the CS351 compact system. During commissioning, both systems
you will commission the CS351 compact system and 350 modular system. will be mechanically and electrically configured from scratch and
hydraulics
hydraulics
Industrial
Industrial
parameterized using the operating software. Practical programming exercises
constantly alternating with theory perfectly reinforce what has been learned.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS CONTENTS DATES (GERMAN) LOCATION
ff Complete system layout ff The hardware of the compact system and the March 2 - March 6, 2020 Murrhardt
ff Individual system components modular tightening system May 25 - May 29, 2020 Murrhardt
ff Practical introduction to handling of 350 system ff Configuring and programming a tightening October 5 - October 9, 2020 Murrhardt
Automation and
Automation and
Industry 4.0
Industry 4.0
and differences to the 300 system channel and application
(tightening channel, tightening parameters, ff Connecting to higher systems Please contact us for more dates and individual
tightening configuration, basic programming, ff Fault analysis and correction, incl. backing up training courses. Training in English available on
interfaces, new features) parameters request. We would be happy to help you.
Electric drives
Electric drives
and controls
and controls
LEARNING TARGET TRAINING TIME
LEARNING TARGET
ff Gaining an overview of the interplay between 5 days:
DATES (GERMAN) LOCATION
ff Recognizing differences to the 300/310 system individual tightening system components Day 1 10:00 AM – 4:30 PM
ff Being able to commission tightening simulators March 17 - March 19, 2020 Murrhardt ff Being able to commission a tightening channel Days 2 to 4 8:00 AM – 4:30 PM
Tightening
Tightening
systems
systems
ff Being able to create programs according to July 7 - July 9, 2020 Murrhardt independently Day 5 8:00 AM – 3:00 PM
specifications November 3 - November 5, 2020 Murrhardt ff Being able to create tightening programs and
ff Being able to implement new features understanding the corresponding parameters PRICE
Please contact us for more dates and individual ff Being able to systematically troubleshoot and
€2,050.00 (net) / €2,439.50 (gross)
technology
technology
PREREQUISITE training courses. Training in English available on localize errors using the diagnostic tools available
Welding
Welding
request. We would be happy to help you.
Completion of a 300/310 system training course or
PREREQUISITE
comparable knowledge
TRAINING TIME
ff Technical understanding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP 3 days: ff Completion of the ESTG-T training course or
Day 1 10:00 AM – 4:30 PM comparable knowledge
Operators, service technicians, programmers,
Day 2 8:00 AM – 4:30 PM
planners/application engineers
Day 3 8:00 AM – 3:00 PM TARGET GROUP
Pneumatics
Pneumatics
Operators, service technicians, programmers,
PRICE
planners/application engineers
€1,440.00 (net) / €1,713.60 (gross)
Safety technology
Safety technology
ADVANCED TRAINING COURSES
EST-Sys350-I-Prog
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-CS351-I-Prog EST-Nexo-I-Prog
CS351 Tightening system Nexo measuring cordless screwdriver
New training
New training
courses
courses
(single-channel system)
eDrive & Control
Academy
CS351 compact system (single-channel system). The interplay between software of the Nexo measuring cordless screwdriver. First, each function
individual components in the different versions will be discussed. of the Nexo will be shown and explained. This includes basic commissioning
Important system functions will be demonstrated and independently tested with tightening parameters as well as connecting Nexo to higher systems
hydraulics
hydraulics
Industrial
Industrial
on tightening systems. through radio communication. In a practical section of the training course,
you will commission the Nexo independently using the available analysis
CONTENTS and diagnostic tools.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff The hardware of the CS351 compact system
CONTENTS
ff Configuring and programming a tightening
channel ff The hardware of the Nexo measuring cordless
ff Connecting to higher systems screwdriver and the Open BAT Access Point
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Fault analysis and correction, incl. backing up ff Configuring and programming a tightening
parameters channel, incl. WiFi
ff Connecting to higher systems
LEARNING TARGET ff Fault analysis and correction, incl. backing up
parameters
Electric drives
Electric drives
and controls
and controls
ff Gaining an overview of the interplay between
individual tightening system components
LEARNING TARGET
ff Being able to commission a tightening channel
independently ff Being able to commission a tightening channel DATES (GERMAN) LOCATION
ff Being able to create tightening programs and independently
Tightening
Tightening
DATES (GERMAN) LOCATION April 7 - April 8, 2020 Murrhardt
systems
systems
understanding the corresponding parameters ff Being able to create tightening programs and
July 14 - July 15, 2020 Murrhardt
ff Being able to systematically troubleshoot and February 18 - February 20, 2020 Murrhardt understanding the corresponding parameters
November 17 - November 18, 2020 Murrhardt
localize errors using the diagnostic tools available May 12 - May 14, 2020 Murrhardt ff Knowing how to connect the Nexo cordless
September 15 - September 17, 2020 Murrhardt screwdriver to a WiFi infrastructure
Please contact us for more dates and individual
technology
technology
PREREQUISITE ff Being able to systematically troubleshoot and
Welding
Welding
training courses. Training in English available on
Please contact us for more dates and individual localize errors using the diagnostic tools available
ff Technical understanding request. We would be happy to help you.
training courses. Training in English available on
ff Completion of the ESTG-T training course or
request. We would be happy to help you. PREREQUISITE
comparable knowledge TRAINING TIME
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Technical understanding
TRAINING TIME 2 days:
TARGET GROUP ff Completion of the ESTG-T training course or
Day 1 10:00 AM – 4:30 PM
3 days: comparable knowledge
Operators, service technicians, programmers, Day 2 8:00 AM – 3:00 PM
Day 1 10:00 AM – 4:30 PM
planners/application engineers
Pneumatics
Pneumatics
Day 2 8:00 AM – 4:30 PM TARGET GROUP
PRICE
Day 3 8:00 AM – 3:00 PM
Operators, service technicians, programmers,
€1,020.00 (net) / €1,213.80 (gross)
planners/application engineers
PRICE
Safety technology
Safety technology
€1,440.00 (net) / €1,713.60 (gross)
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
Notes
Tightening systems
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design
Mechanical engineers Commissioning Proprietors
eLearning engineers
Electricians engineers Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
BASIC TRAINING
263 ESTG-W Basic knowledge of resistance welding systems ● ● ● ● ●
INTERMEDIATE TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
264 EST-BOS6000-PSI-IProg Programming and servicing with PSI6000 + BOS6000 ● ● ● ●
266 EST-BOS6000/SZ-IBIN Setting Up and servicing PSI6000 with integrated servogun control ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
NEW 268 EST-PRC7000-Advanced PRC7x00 + PRI7000 Resistance welding basics of process technology ● ● ● ●
TRAINING SYSTEM
Electric drives
Electric drives
270 PRC7000 Training system
and controls
and controls
271 PSI63C0 Training system
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
262 Welding technology Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Welding technology 263
New training
courses
courses
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
welding systems.
1 3 2
ESTG-W EST-BOS6000- EST-BOS6000/UI-IBIN
Basic knowledge of PSI-IProg PSI6000 with
hydraulics
hydraulics
Industrial
Industrial
resistance welding Programming and UI controllers and
systems servicing with servicing
PSI6000 + BOS6000
p. 263 p. 264 p. 265
2 CONTENTS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
EST-BOS6000/SZ-IBIN
Setting up and
servicing PSI6000 ff Basics of resistance welding systems
with integrated
servogun control ff Different welding procedures
p. 266
ff Spot welding
ff Roll seam welding
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Projection welding
ff Important process parameters
ff Welding practice with select materials
ff Test procedures in resistance welding
Electric drives
Electric drives
and controls
and controls
LEARNING TARGET
NEU 3 NEU 2 NEU 3
ff Knowing requirements and influencing factors of
EST-PRC7000-Basic EST-PRC7000- EST-PRC7000-Expert
PRC7x00 and PRI7000 Advanced PRC7x00 + PRI7000 weld spots
Basics PRC7x00 + PRI7000 Resistance welding DATES (GERMAN) TRAINING LOCATION
Advanced knowledge advanced knowledge ff Understanding welding systems with detailed
Tightening
Tightening
systems
systems
p. 267 p. 268 p. 269 overview of the functioning and structure of March 18, 2020 Erbach/Odenwald
components September 16, 2020 Erbach/Odenwald
ff Creating a basis for participation in more
advanced training courses Please contact us for more dates and individual
technology
technology
training courses. Training in English available on
Welding
Welding
PREREQUISITE request. We would be happy to help you.
Technical understanding
TRAINING TIME
Linear motion
Linear motion
and assembly
and assembly
technology
technology
TARGET GROUP 1 day: 8:00 AM – 4:00 PM
Pneumatics
NOTICE
Safety technology
www.boschrexroth.com/training
@
NEU LW
Energy efficiency
Energy efficiency
@
EST-BOS6000-PSI-IProg EST-BOS6000/UI-IBIN
Programming and servicing PSI6000 with UI controllers and servicing
New training
New training
courses
courses
with PSI6000 + BOS6000
eDrive & Control
Academy
PSI6000 family and the related BOS6000 user interface. The PSI will be operated in the KSR and UI control types. You will use
welding guns to record reference curves.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff The control system and its programming interfaces ff Basics of UI control
ff Operation and function of the PSI6000 control ff Creating reference curves March 12 - March 13, 2020 Erbach/
ff I/O interface, electrical connections, voltage supply ff Activating UI control and UI monitoring Odenwald
ff Entering welding parameters ff Setting the controller and monitoring limits June 18 - June 19, 2020 Erbach/
Automation and
Automation and
Industry 4.0
Industry 4.0
ff KSR current control, electrode wear ff Reading information from the histogram Odenwald
compensation (stepper) ff STC application September 10 - September 11, 2020 Erbach/
ff Diagnostics, error and status messages ff Q-Stop parameterization Odenwald
ff Protocol functions December 3 - December 4, 2020 Erbach/
ff Backing up data and exchanging control LEARNING TARGET Odenwald
Electric drives
Electric drives
and controls
and controls
DATES (GERMAN) TRAINING ff Becoming proficient with the UI controller
LEARNING TARGET Please contact us for more dates and individual
LOCATION ff Knowing how to record reference curves
training courses. Training in English available on
ff Knowing how the PSI6000 control systems ff Knowing and using control and monitoring
March 9 - March 11, 2020 Erbach/Odenwald request. We would be happy to help you.
function (6xxx and 6xCx Tricore) options of the UI controllers
Tightening
Tightening
June 15 - June 17, 2020 Erbach/Odenwald
systems
systems
ff Knowing the signal exchange between PSI and
September 7 - September 9, 2020 Erbach/Odenwald TRAINING TIME
robot/welding machine PREREQUISITE
November 30 - December 2, 2020 Erbach/Odenwald
ff Being able to enter welding parameters 2 days:
ff Completion of the EST-BOS6000-PSI-IProg
ff Knowing how to back up data and exchange Day 1 8:00 AM – 4:30 PM
Please contact us for more dates and individual training course
technology
technology
control Day 2 8:00 AM – 3:00 PM
Welding
Welding
training courses. Training in English available on ff Basic knowledge of Windows
ff Knowing how to connect the PC and VCP
request. We would be happy to help you.
control panel to the SST and operating them PRICE
TARGET GROUP
TRAINING TIME €1,020.00 (net) / €1,213.80 (gross)
Linear motion
Linear motion
and assembly
and assembly
PREREQUISITE Operators, service technicians, programmers,
technology
technology
3 days: planners/application engineers
ff Basics of Resistance Welding Systems NOTICE
Day 1 10:00 AM – 4:30 PM
ff Basic knowledge of Windows
Day 2 8:00 AM – 4:30 PM You can find the current offer online at:
Day 3 8:00 AM – 3:00 PM www.boschrexroth.com/training
Pneumatics
Pneumatics
TARGET GROUP
Safety technology
ADVANCED TRAINING COURSES
EST-BOS6000/UI-IBIN, EST-BOS6000/SZ-IBIN
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-BOS6000/SZ-IBIN EST-PRC7000-Basic
Setting up and servicing PSI6000 with PRC7x00 and PRI7000 basics
New training
New training
courses
courses
integrated servogun control
eDrive & Control
Academy
controller. The PSI will be operated in combination with an IndraDrive the PRC7x00 family and the related PRI7000 user interface.
CS drive amplifier and an electric servo cylinder.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS PREREQUISITE
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Overall system structure ff Setup of PRC7x00 ff Knowledge of electrical engineering/metal
ff Drive operating modes March 16 - March 17, 2020 Erbach/ ff The control system and its programming interfaces processing industry
ff New parameters in the BOS6000 Odenwald ff Operation and function of the PRC7x00 control ff Basic knowledge of Windows
ff Complete commissioning with troubleshooting September 14 - September 15, 2020 Erbach/ ff I/O interface, electrical connections,
Automation and
Automation and
TARGET GROUP
Industry 4.0
Industry 4.0
Odenwald voltage supply
LEARNING TARGET ff Description and structure of the PRI7000
Operators, service technicians, programmers,
Please contact us for more dates and individual programming user interface
ff Becoming proficient with the new servogun planners/application engineers
training courses. Training in English available on ff Creating/commissioning welding guns
controller
request. We would be happy to help you. -- Scaling force and current
Electric drives
Electric drives
and controls
and controls
ff Mastering the drive (messages and error displays) DATES (GERMAN) TRAINING
ff Diagnostics, protocol functions, error and status
ff Being familiar with the new BOS6000 parameters LOCATION
TRAINING TIME messages
ff Procedure for importing and exporting, backing March 23 - March 25, 2020 Erbach/
PREREQUISITE 2 days:
up and restoring data (control exchange) Odenwald
Day 1 10:00 AM – 4:30 PM
Tightening
Tightening
ff Completion of the EST-BOS6000-PSI-Prog ff Creating welding guns, welding spots and September 14 - September 16, 2020 Erbach/
systems
systems
Day 2 8:00 AM – 3:00 PM
training course weld jobs Odenwald
ff Basic knowledge of Windows ff KSR current control, electrode cap wear (stepper)
PRICE
Please contact us for more dates and individual
TARGET GROUP €1,020.00 (net) / €1,213.80 (gross) LEARNING TARGET training courses. Training in English available on
technology
technology
Welding
Welding
request. We would be happy to help you.
Operators, service technicians, programmers, ff Imparting the basics and functionality of
NOTICE
planners/application engineers PRC/PRI7x00
TRAINING TIME
You can find the current offer online at:
Linear motion
Linear motion
and assembly
and assembly
www.boschrexroth.com/training 3 days:
technology
technology
Day 1 10:00 AM – 4:30 PM
Day 2 8:00 AM – 4:30 PM
Day 3 8:00 AM – 3:00 PM
Pneumatics
Pneumatics
PRICE
Safety technology
ADVANCED TRAINING COURSES
EST-PRC7000-Advanced, EST-PRC7000-Expert
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
EST-PRC7000-Advanced EST-PRC7000-Expert
PRC7x00 + PRI7000 Resistance welding PRC7x00 + PRI7000 Resistance welding
New training
New training
courses
courses
basics of process technology advanced knowledge
eDrive & Control
Academy
(resistance welding basics). This is a prerequisite for the record of actionable. Handling the electric servo gun and using the IndraWorks
reference curves for the adaptive control (PSF/UIP). DS drive software is also on the agenda.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS PREREQUISITE CONTENTS PREREQUISITE
ff Repetition of the PRC/PRI7x00 basics ff Setting up resistance welding systems ff Repetition of the contents of the basic and ff Certified welding specialist
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Production processes of the different steels ff Basics of Resistance Welding Systems advanced training courses ff Basics of Resistance Welding Systems
(normal-strength and high-strength steel) ff Basic knowledge of Windows ff Differences between the steel and aluminum ff Basic knowledge of Windows
ff Procedure for the exchange of tongs, caps and ff Completion of the EST-PRC7000-Basic training production processes ff Completion of the EST-PRC7000-Basic and/or
current straps (cables and milling machines) course ff Setup of the welding tongs in order to be able to EST-PRC7000-Advanced training course
Automation and
Automation and
ff Creating and using reference and monitoring weld aluminum
Industry 4.0
Industry 4.0
programs TARGET GROUP ff Determining welding parameters on the basis of TARGET GROUP
ff Determining welding parameters on the basis of the base material (workpiece AL in comparison to
Operators, service technicians, programmers, Operators, service technicians, programmers,
the base material or workpiece steel)
planners/application engineers planners/application engineers
ff Destructive (DT) or non-destructive (NDT) testing ff Destructive (DT) or non-destructive (NDT) testing
Electric drives
Electric drives
and controls
and controls
of the quality of welding points of the quality of welding points
DATES (GERMAN) TRAINING DATES (GERMAN) TRAINING
ff Recording of adaptive curves (UI reference curves) ff Prerequisites for AL adaptive welding
LOCATION LOCATION
ff Interpreting and assessing UI reference curves ff Recording of UI reference curves (at AL)
ff Activating UI control and UI monitoring March 26 - March 27, 2020 Erbach/ ff Curve sketching March 30 - April 1, 2020 Erbach/
ff Setting the controller and monitoring limits Odenwald ff Setting the controller and monitoring limits Odenwald
Tightening
Tightening
systems
systems
(tolerances) September 17 - September 18, 2020 Erbach/ ff Optimization run of the adaptive curves and September 21 - September 23, 2020 Erbach/
ff Optimization run of the adaptive curves Odenwald assessment of the UI reference curves Odenwald
(UI reference curves) ff Activating the UI control and UI monitoring
ff Q-Stop functions Please contact us for more dates and individual ff Creating STC curves (at AL) Please contact us for more dates and individual
technology
technology
Welding
Welding
-- Defining the limit values and factors training courses. Training in English available on ff Reading information from the histogram training courses. Training in English available on
ff Reading information from the histogram request. We would be happy to help you. ff Q-Stop functions request. We would be happy to help you.
ff Exchange of experience -- Defining the limit values and factors
TRAINING TIME ff Basics of the drive technology application TRAINING TIME
Linear motion
Linear motion
and assembly
and assembly
technology
technology
LEARNING TARGET (IndraWorks DS)
2 days: 3 days:
ff Exchange of experience
ff Secure creation of welding parameters and their Day 1 8:00 AM – 4:30 PM Day 1 10:00 AM – 4:30 PM
assessment Day 2 8:00 AM – 3:00 PM Day 2 8:00 AM – 4:30 PM
LEARNING TARGET
Day 3 8:00 AM – 3:00 PM
Pneumatics
Pneumatics
PRICE ff Determining welding parameters
ff Interpreting histogram information PRICE
€1,020.00 (net) / €1,213.80 (gross)
ff Optimization run of the adaptive curves
€1,440.00 (net) / €1,713.60 (gross)
ff Getting to know the basics of the IndraWorks
Safety technology
Safety technology
ADVANCED TRAINING COURSES
DS drive software
EST-PRC7000-Expert ff Interpreting, assessing and sketching curves
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
New training
courses
courses
eDrive & Control
Academy
This training system facilitates realistic work with This training system facilitates realistic work with
the PRC7x00 welding system in a safe extra-low the PSI63C0 welding system in a safe extra-low
voltage area. voltage area.
hydraulics
hydraulics
Industrial
Industrial
With a laptop and the operating software PRI7000, With a laptop and the operating software BOS6000
all activities on welding systems can be safely (welding user interface), all activities on welding
practiced, for example: systems can be safely practiced, for example:
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Programming the welding parameters ff Programming the welding parameters
ff Programming the spot tables ff Programming the spot tables
ff Simulating a welding process up to 30 kA ff Simulating a welding process up to 36 kA
ff Control and robot communication diagnostics ff Control and robot communication diagnostics
ff Programming the current monitoring with ff Programming the current monitoring with
Automation and
Automation and
Industry 4.0
Industry 4.0
tolerances tolerances
ff Programming the milling cycles ff Programming the milling cycles
ff Simulating the different current control variations ff Simulating the different current control variations
(KSR or UI operation) (KSR or UI operation)
Electric drives
Electric drives
ff Analyzing the logs (welding log, error log and data ff Analyzing the logs (welding log, error log and data
and controls
and controls
modification log) modification log)
ff Backing up and restoring the data ff Backing up and restoring the data
ff Generating reference curves ff Generating reference curves
ff Analyzing the histogram ff Analyzing the histogram
Tightening
Tightening
systems
systems
Can be connected directly to a socket Can be connected directly to a socket
(AC 230 V ± 10 %, 16 A, 50-60 Hz). (AC 230 V ± 10 %, 16 A, 50-60 Hz).
technology
technology
ff Are you interested in our training systems? ff Are you interested in our training systems?
Welding
Welding
Please contact us, we would be happy to Please contact us, we would be happy to
advise you! advise you!
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Material number Material number
R911372425 PRC7x00 Training System R911337406 PSI63C0 Training System
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
272 Welding technology Training Program 2020 | Drive & Control Academy
PRODUCT DESCRIPTION
Academy
tong motion
Dimensions:
ff Programming the current monitoring with
Depth: 830 mm
tolerances
Height: 500 mm
ff Simulating different current control variations
Width: 380 mm
Electric drives
(KSR / UI operation)
and controls
Material number
R911379119 Servogun Training System
(without PSI6xxx)
Safety technology
Energy efficiency
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design
Mechanical engineers Commissioning Proprietors
eLearning engineers
Electricians engineers Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
LINEAR MOTION TECHNOLOGY: BASIC TRAINING
277 eLTG Basic knowledge of linear motion technology ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
278 LTSY Designing profiled guide rails and ball screw drives ●
281 LTEP-PK Assembling and maintaining profiled rail guides and ball screw drives ● ● ●
Automation and
Automation and
Industry 4.0
Industry 4.0
ASSEMBLY TECHNOLOGY: PRACTICE WITH ERROR ANALYSIS
282 MOT-TS2 TS2 plus ● ● ●
Electric drives
284 MOT-TS5 TS 5 ● ● ●
and controls
and controls
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
276 Linear motion and assembly technology Training Program 2020 | Drive & Control Academy Drive & Control
Drive Academy
& Control| Academy
Training Program
| Training2020
Program 2020 Linear motion and assembly technology
eDrive 277
& Control Academy
New training
courses
courses
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
this eLearning course is the ideal choice if you plan to attend intermediate
dd Linear Motion Technology training courses.
2 4
hydraulics
hydraulics
Industrial
Industrial
LTSY LTSY-WZM
Designing profiled guide Planning linear motion
rails and ball screw components for
drives machine tools
eLTG
p. 278 p. 279
Basic knowledge CONTENTS TRAINING TIME
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
of linear motion
technology (eLearning)
1
f Introduction to linear motion technology During the license term, the eLearning is available
LTEP-L
p. 277 Maintaining and f Structure, function and uses of profiled at any time. The license period is 12 months after
servicing linear
motion systems rail systems activation.
p. 280 f Structure, function and uses of linear bushings
Automation and
Automation and
Industry 4.0
Industry 4.0
and shafts Duration: approx. 12 to 18 hours
1
LTEP-PK f Structure, function and uses of screw drives
Assembling and
maintaining profiled f Structure of linear motion systems AVAILABLE LANGUAGES
rail guides and ball
screw drives
f Overview of ready-to-install linear motion systems
p. 281
German, English, Spanish
Electric drives
Electric drives
and controls
and controls
LEARNING TARGET
PRICE
PRACTICE WITH ERROR ANALYSIS f Being familiar with the physical and theoretical
This eLTG eLearning course is available as
principles of linear motion technology
a single-user or multi-user license.
dd Assembly Technology f Knowing the structure, function and uses of linear
Tightening
Tightening
systems
systems
2 motion components
€216.00 (net) / €257.04 (gross) per year
MOT-TS2 f Selecting appropriate linear motion components
TS 2 plus
technology
p. 282
Welding
Welding
f Technical understanding NOTICE
1
MOT-VFS
f PC with Internet access, Flash Player 10 or
We also offer to conduct the LTG – Basic Knowledge
VarioFlow plus
higher: http://get.adobe.com/de/flashplayer
of Linear Motion Technology two-day classroom
f Email address for personal login
Linear motion
Linear motion
and assembly
and assembly
training course either at your location or in our
technology
technology
p. 283
company. In this case, the training package includes
TARGET GROUP
1 the eLTG eLearning course for all participants.
MOT-TS5
TS 5 Operators, service engineers, programmers,
planners/implementers, managers, trainers Try out our eLearning courses using a free guest
Pneumatics
Pneumatics
p. 284 account: www.boschrexroth.com/elearning
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
LTSY LTSY-WZM
Designing profiled guide rails and Planning linear motion components
New training
New training
courses
courses
ball screw drives for machine tools
eDrive & Control
Academy
linear motion technology components by means of the Linear Motion Operating conditions will be determined and linear guide rails computed.
Designer (LMD) software. You may send us a practical example up to two You may send us a practical example up to two weeks before the start of
weeks before the start of training if desired. This will then be calculated in training if desired, which will then be worked on during the course.
hydraulics
hydraulics
Industrial
Industrial
the group during the course.
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Explanation of the Linear Motion Designer ff Properly determining profiled guide rails and Dates and training locations available on request
software ball screw drives
ff Explanations of input screens and parameters ff Factoring in the effect of heating and tension TRAINING TIME
ff Interpretation of the output data of the Linear ff Determining tool offset due to guide spring
4 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
Motion Designer deflection
Day 1 10:00 AM – 4:15 PM
ff Design tips and tricks using Linear Motion ff Tips and tricks for sizing guide rails in the
Days 2 and 3 8:30 AM – 4:15 PM
Designer machine tool industry
Day 4 8:30 AM – 12:30 PM
Electric drives
and controls
and controls
PRICE
ff Being familiar with Linear Motion Designer ff Being familiar with the process of designing
€1,570.00 (net) / €1,868.30 (gross)
ff Completing six sample exercises for the design DATE TRAINING LOCATION guides in the machine tool industry
with LMD ff Being able to independently plan out linear
Dates and training locations available on request NOTICE
motion components using the calculation
Tightening
Tightening
systems
systems
PREREQUISITE programs Please send your own applications for calculation
TRAINING TIME
during the training no later than two weeks before
Technical understanding
2 days: PREREQUISITE the training starts to training@boschrexroth.de.
Day 1 9:00 AM – 4:15 PM
TARGET GROUP ff Technical training (technicians, engineers)
technology
technology
Day 2 8:00 AM – 4:15 PM
Welding
Welding
ff Completion of the LTG and LTSY training courses
Planners/application engineers
ff If available, please bring your own laptop
PRICE
Linear motion
and assembly
and assembly
technology
technology
Planners/application engineers
ADVANCED TRAINING COURSES
LTSY-WZM
Pneumatics
Pneumatics
NOTICE
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
LTEP-L LTEP-PK
Maintaining and servicing linear motion systems Assembling and maintaining profiled rail guides
New training
New training
courses
courses
and ball screw drives
eDrive & Control
Academy
linear motion systems (axes) through practical exercises. MKK and CKR profiled guide rails and ball screw drives through practical exercises.
type linear motion systems by Rexroth will be used in the exercises.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS CONTENTS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Overview of the various kinds of linear motion ff Guidelines on assembling and aligning profiled
systems as well as their uses and causes of failure guide rails and ball screw drives
ff Information on visually inspecting components in ff Assembling partially assembled rails
linear motion systems ff Information on maintaining and servicing profiled
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Setting belt tension guide rails
ff Selecting and assembling profiled guide rail
LEARNING TARGET accessories
Electric drives
and controls
and controls
motion systems with ball screw drives and geared
belt drives ff Being familiar with the various assembly and
ff Knowing how to replace and service components alignment methods for profiled guide rails and
in linear motion systems ball screw drives using models
ff Knowing how to properly lubricate linear motion ff Knowing how to properly lubricate profiled guide
Tightening
Tightening
systems
systems
systems DATES (GERMAN) TRAINING LOCATION rails and ball screw drives DATES (GERMAN) TRAINING LOCATION
ff Being able to demonstrate and practice
June 16, 2020 Schweinfurt June 17, 2020 Schweinfurt
PREREQUISITE assembling and aligning profiled guide rails and
November 18, 2020 Schweinfurt November 19, 2020 Schweinfurt
ball screw drives using models
Technical understanding
technology
technology
Welding
Welding
Please contact us for more dates and individual Please contact us for more dates and individual
PREREQUISITE
TARGET GROUP training courses. We would be happy to help you. training courses. We would be happy to help you.
Technical understanding
Operators, service technicians,
TRAINING TIME TRAINING TIME
Linear motion
Linear motion
and assembly
and assembly
planners/application engineers
technology
technology
TARGET GROUP
1 day: 9:00 AM – 4:30 PM 1 day: 9:00 AM – 4:30 PM
Operators, service technicians,
PRICE planners/application engineers PRICE
Pneumatics
Pneumatics
€573.00 (net) / €681.87 (gross) €573.00 (net) / €681.87 (gross)
NOTICE NOTICE
You can find the current offer online at: You can find the current offer online at:
Safety technology
Safety technology
www.boschrexroth.com/training www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
MOT-TS2 MOT-VFS
TS 2 plus VarioFlow plus
New training
New training
courses
courses
eDrive & Control
Academy
current and modern modular units. Using our new training system and new all current and modern modular units. Using our new training system and
modular units, we will show you everything maintenance personnel or new modular units, we will show you everything maintenance personnel or
system supervisors of a TS 2 plus transfer system need to know. system supervisors of a VarioFlow plus transfer system need to know.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING CONTENTS TARGET GROUP
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Overview of the TS 2 plus transfer system ff Overview of the VarioFlow plus system Operators, service technicians, planners/application
components March 24 - March 25, 2020 Stuttgart/Bad components engineers
ff Setting up and commissioning a TS 2 plus Cannstatt ff Setting up and commissioning a VarioFlow plus
transfer system October 20 - October 21, 2020 Stuttgart/Bad system DATES (GERMAN) TRAINING LOCATION
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Systematic diagnosis and troubleshooting Cannstatt ff Systematic diagnosis and troubleshooting
March 26, 2020 Stuttgart/Bad Cannstatt
ff Planning and implementing preventative servicing ff Planning and implementing preventative servicing
October 22, 2020 Stuttgart/Bad Cannstatt
measures Please contact us for more dates and individual measures
ff Making repairs and planning parts replacement training courses. We would be happy to help you. ff Making repairs and planning parts replacement
Please contact us for more dates and individual
Electric drives
Electric drives
and controls
and controls
training courses. We would be happy to help you.
Practical exercises are planned for all aspects. TRAINING TIME Practical exercises are planned for all aspects.
Tightening
systems
systems
ff How to properly assemble and commission PRICE ff How to properly assemble and commission
PRICE
TS 2 plus systems VarioFlow plus systems
€1,020.00 (net) / €1,213.80 (gross)
ff How to plan and implement servicing measures ff How to plan and implement servicing measures €590.00 (net) / €702.10 (gross)
technology
PREREQUISITE PREREQUISITE NOTICE
Welding
Welding
It is possible to schedule the VarioFlow plus training
Basic knowledge of TS 2 from our product catalog Basic knowledge of VarioFlow plus from our product You can find the current offer online at:
course after the TS 2 plus course.
catalog www.boschrexroth.com/training
TARGET GROUP
Linear motion
Linear motion
and assembly
and assembly
NOTICE
technology
technology
Operators, service technicians,
You can find the current offer online at:
planners/application engineers
www.boschrexroth.com/training
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
MOT-TS5
TS 5
New training
courses
eDrive & Control
We have compiled a TS 5 training course with the contents from all current
Academy
and modern modular units. Using our new training system and new
construction units, we will show you everything that maintenance personnel
or system supervisors of a TS 5 transfer system need to know.
hydraulics
Industrial
measures
March 27, 2020 Stuttgart/Bad Cannstatt
ff Making repairs and planning parts replacement
October 23, 2020 Stuttgart/Bad Cannstatt
NOTICE
@
NEU LW
Energy efficiency
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design engineers
Mechanical engineers Commissioning Proprietors
eLearning Technical sales
Electricians engineers Buyers
hydraulics
hydraulics
Industrial
Industrial
BASIC TRAINING
289 PTG Basic knowledge of pneumatics and electropneumatics ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
INTERMEDIATE TRAINING
291 PTEP-1 Electropneumatics and bus systems ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
Electric drives
Electric drives
and controls
and controls
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
288 Pneumatics Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Pneumatics 289
New training
courses
courses
and electropneumatics
eDrive & Control
Academy
BASIC TRAINING INTERMEDIATE TRAINING
pneumatic diagrams – many basics that pneumatic engineers need to know
dd Pneumatics expert are comprehensively explained. This is the ideal training course for
beginners who want to attend intermediate training courses later on
hydraulics
hydraulics
Industrial
Industrial
Become a pneumatics expert and book the following pneumatic training courses
at an affordable package price of €3,051.00 (net)! You save €1,538.00 (net)
as well as for advanced students who want to refresh their knowledge.
compared to a single booking. This offer is valid for all 2020 training dates.
CONTENTS
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
4
PTG1) PNEUMATICS EXPERT
Basic knowledge ff Basic physical principles and relationships
of pneumatics and Become a pneumatics expert and book
electropneumatics ff Features of pneumatics
4 3 our pneumatic training courses at an
PTEP-1 PTWI ff Compressed air generation, compressor types
p. 289 Electropneumatics and Pneumatics –
€3,051.00 (net)
affordable package price of
+ bus systems
+ Maintenance and
= ff Compressed air conditioning, drying and
€3,051.00 (net) – see learning path!
Automation and
Automation and
troubleshooting €3,630.69 (gross)
distribution
Industry 4.0
Industry 4.0
ePTG1) You save €1,538.00 (net) compared to
Basic knowledge of p. 291 p. 292 ff Directional, flow, pressure and isolation valves
pneumatics a single booking. This offer is valid for
(eLearning) ff Single- and double-acting cylinders
all 2020 training dates.
ff Holding element control, impulse valve
p. 290
ff Velocity and stop control
Electric drives
Electric drives
and controls
and controls
ff Path-dependent controls, end position switches DATES (GERMAN) TRAINING
ff Time- and pressure-dependent controls LOCATION
dd Single booking ff Sequence controls with signal overlapping
April 14 - April 17, 2020 Würzburg
ff Basic circuits of electropneumatics
August 3 - August 6, 2020 Würzburg
ff Symbols, circuit diagrams acc. to ISO 1219
Tightening
Tightening
4 4
December 7 - December 10, 2020 Würzburg
systems
systems
PTG1) PTEP-1
Basic knowledge Electropneumatics ff Practical exercises on the pneumatic training
of pneumatics and and bus systems
system
electropneumatics TRAINING TIME
p. 289 p. 291
LEARNING TARGET 4 days:
technology
technology
Day 1 10:00 AM – 4:15 PM
Welding
Welding
3
ePTG1) PTWI ff Understanding the basic setup of
Basic knowledge of Pneumatics – Days 2 to 4 8:00 AM – 4:15 PM
pneumatics Maintenance and pneumatic systems
(eLearning) troubleshooting
ff Understanding the function and setup of selected
PRICE
p. 290 p. 292 pneumatic components
Linear motion
Linear motion
and assembly
and assembly
technology
technology
ff Reading and preparing pneumatic operating €1,467.00 (net) / €1,745.73 (gross)
diagrams
ff Handling pneumatic systems during planning and ADVANCED TRAINING COURSES
in everyday operations
PTEP-1, PTWI
Pneumatics
Pneumatics
PREREQUISITE
NOTICE
Technical understanding
The contents of the PTG classroom training course
Safety technology
Safety technology
TARGET GROUP are identical with those of the ePTG eLearning
course. For more detailed information,
Operators, service engineers, programmers,
please see the next page.
planners/implementers, managers, trainers
1) W
@
hen you book the PTG training course you will receive a
@
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
12-month single license for the ePTG eLearning course free of charge.
ePTG PTEP-1
Basic knowledge of pneumatics Electropneumatics and bus systems
New training
New training
courses
courses
Pneumatics Pneumatics
expert expert
From the function and the properties of selected components to the setup This training course focuses on the system as a whole. Here, you will
Academy
Academy
of pneumatic operating diagrams – many basics that pneumatic engineers become familiar with the basic principles of electropneumatics in
need to know. This eLearning is the right choice if you plan to attend conjunction with bus-controlled valve manifold systems. Examples from
advanced training courses. everyday practice will illustrate and reinforce what has been learned.
hydraulics
hydraulics
Industrial
Industrial
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Automation and
Automation and
Industry 4.0
ff Practical exercises on the pneumatic training
Industry 4.0
Electric drives
Electric drives
and controls
and controls
Tightening
Tightening
systems
systems
controllers
PRICE
f Understanding the basic setup of ff Being familiar with complex control systems with
Please contact us for more dates and individual
pneumatic systems When you book the PTG training course you will valve supports, PLC and field bus systems
training courses. We would be happy to help you.
f Understanding the function and setup of selected receive a 12-month single license for the ePTG (PROFIBUS DP, AS-i)
technology
technology
Welding
Welding
TRAINING TIME
f Reading and preparing pneumatic operating PREREQUISITE
diagrams €185.00 (net) / €220.15 (gross) per year 4 days:
Completion of the PTG/ePTG training course or
f Handling pneumatic systems during planning and Day 1 10:00 AM – 4:15 PM
comparable knowledge
Linear motion
Linear motion
and assembly
and assembly
in everyday operations Price for multi-user licenses upon request Days 2 to 4 8:00 AM – 4:15 PM
technology
technology
TARGET GROUP
PREREQUISITE PRICE
Operators, service technicians, programmers,
f Technical understanding €1,467.00 (net) / €1,745.73 (gross)
planners/application engineers
Pneumatics
Pneumatics
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
PTWI
Pneumatics –
New training
courses
Pneumatics
Maintenance and troubleshooting expert
eDrive & Control
With this training course, you can refresh and deepen your knowledge of
Academy
LOCATION
Industry 4.0
practical exercises
ff Implementing the four pillars of maintenance
May 18 - May 20, 2020 Würzburg
according to DIN 31051 or EN 13306
November 2 - November 4, 2020 Würzburg
(inspection, maintenance, repair and
improvement) in the field of maintenance
Electric drives
and controls
Seite 288 .
PREREQUISITE
NOTICE
Completion of the PTG/ePTG training course or
Pneumatics
comparable knowledge You can find the current offer online at:
www.boschrexroth.com/training
Safety technology
@
NEU LW
Energy efficiency
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design
Mechanical engineers Commissioning Proprietors
eLearning engineers
Electricians engineers Buyers
Technical sales
hydraulics
hydraulics
Industrial
Industrial
INDUSTRIAL HYDRAULICS
298 DC-FSi-MS Basic knowledge of machine safety ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
300 DC-FSi-FT Safe fluid technology – Safely implementing ISO 13849 ● ● ●
NEW 302 HT-HS Liability and damages in maintenance during installation and operation of hydraulic machinery ● ● ● ● ● ●
Automation and
Industry 4.0
Industry 4.0
304 HT-BPSp Imparting expert knowledge of hydraulic accumulators to persons qualified for examination ● ●
305 HT-BPSch Imparting expert knowledge of hydraulic hoses to persons qualified for examination ● ●
Electric drives
307 EAT-ID-Si L3/S4 IndraDrive – L3/S4/S5/SB Drive-Integrated safety technology ● ●
and controls
and controls
308 EST-SLc Project planning for SafeLogic compact safety control system ● ● ●
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
Drive & Control Academy | Training Program 2020 Safety technology 297
New training
courses
Safety technology
Functional safety
dd Planners/application engineers
2 2 3 5 NEU 1
hydraulics
Industrial
DC-FSi-MS DC-MRL-RB DC-FSi-FT DC-SiCE HT-HS
Basic knowledge of Machinery directive and Safe fluid technology From machine safety to Liability and damages
machine safety risk assessment safely implementing CE conformity in maintenance during
EN ISO 13849-1 installation and operation
of hydraulic machinery
Mobile electronics
Mobile hydraulics
dd Service technicians
3 3 2 NEU 1
Automation and
Industry 4.0
HT-Si HT-BPSp HT-BPSch HT-HS
Safety when Imparting expert Imparting expert Liability and damages
commissioning knowledge of hydraulic knowledge of hydraulic in maintenance during
and maintaining accumulators to persons hoses to persons qualified installation and operation
for examination of hydraulic machinery
hydraulic systems qualified for examination
p. 303 p. 304 p. 305 p. 302
Electric drives
and controls
dd Managers
2 2 NEU 1
DC-FSi-MS DC-MRL-RB HT-HS
Basic knowledge of Machinery directive and Liability and damages
Tightening
machine safety risk assessment in maintenance during
systems
installation and operation
of hydraulic machinery
technology
Welding
Linear motion
and assembly
technology
After the first volume "Safety Technology – 10 Steps to Learn more about the implementation of safety technology
Pneumatics
Performance Level" (ISBN 978-3-9814879-1-6), now available in hydraulics and receive concrete support for
as a handbook for hydraulics – application of functional hydraulic circuits in safety-related applications.
safety for hydraulics according to ISO 13849
(ISBN no. 978-3-9820731-0-1):
Safety technology
Energy efficiency
www.boschrexroth.com
Bosch Rexroth AG, R999000291, Version 20-01/EN
298 Safety technology Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Safety technology 299
DC-FSi-MS DC-MRL-RB
Basic knowledge of machine safety Machinery directive and risk assessment
New training
New training
courses
courses
eDrive & Control
Academy
Machinery Directive and receive an introduction to risk assessment under the European Machinery Directive in order to be able to market machinery
ISO 12100 and to functional safety under ISO 13849. accordingly. You will learn the risk assessment necessary in order to do this
in theory and in practice using examples.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
TARGET GROUP
Mobile hydraulics
Mobile hydraulics
LOCATION
ff Basics of machine safety
Service technicians, planners/application engineers
ff Machinery Directive, laws, standards February 20 - February 21, 2020 Würzburg
ff Risk assessment September 14 - September 15, 2020 Erbach/
DATES (GERMAN) TRAINING
ff Functional safety in "10 Steps to Odenwald
LOCATION
Automation and
Automation and
Industry 4.0
Industry 4.0
Performance Level"
Please contact us for more dates and individual May 25 - May 26, 2020 Erbach/
LEARNING TARGET training courses. We would be happy to help you. Odenwald
November 16 - November 17, 2020 Erbach/
ff Getting to know the Machinery Directive
TRAINING TIME Odenwald
Electric drives
Electric drives
and controls
and controls
ff Risk assessment and overview of the
relevant norms 1.5 days:
DATE (ENGLISH) TRAINING
ff Knowing the basics of functional safety according Day 1 10:00 AM – 4:30 PM
CONTENTS LOCATION
to ISO 13849 Day 2 8:00 AM – 12:00 PM
ff Basic information and meaning of the
September 7 - September 8, 2020 Erbach/
Tightening
Tightening
Machinery Directive
systems
systems
PREREQUISITE PRICE Odenwald
ff Prerequisite for the commissioning of machines
Firm knowledge of automation technology. €879.00 (net) / €1,046.01 (gross) ff Risk assessment theory as the basis of machine
Please contact us for more dates and individual
Knowledge of hydraulics, electric drive technology or safety per ISO 12100
training courses. We would be happy to help you.
programmable logic controllers (PLC) is helpful. ADVANCED TRAINING COURSES ff Application of standards
technology
technology
Welding
Welding
DC-FSI-FT, DC-MRL-RB, DC-SiCE TRAINING TIME
TARGET GROUP LEARNING TARGETS
2 days:
Planners/application engineers NOTICE ff Correct application of the Machinery Directive
Day 1 8:30 AM – 5:00 PM
Linear motion
Linear motion
and assembly
and assembly
ff Knowing what documents are required
technology
technology
We recommend that participants bring their own Day 2 8:30 AM – 5:00 PM
ff Knowing how to use a risk assessment
laptops to be able to work with the software tool and
ff Safe use of tools
forms. PRICE
Pneumatics
ff Basic knowledge of machine safety
NOTICE
Safety technology
to be able to work with the software tool and forms.
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
DC-FSi-FT DC-SiCE
Safe fluid technology – From machine safety to CE conformity
New training
New training
courses
courses
Safely implementing ISO 13849
eDrive & Control
Academy
systems. In this practical training, real examples are worked out. In this respect, developing and building safe machines and facilities. You will acquire solid
you will get to know proven safety principles of fluid technology as well as the knowledge of the Machinery Directive, risk assessment and functional
right approach for the selection of safety components. The performance level safety. Practice and deepen your knowledge with practical examples.
hydraulics
hydraulics
Industrial
Industrial
(PL) is calculated with the Sistema software program from theory to practice. Become an expert in machine safety.
Mobile electronics
CONTENTS
Mobile hydraulics
Mobile hydraulics
ff Methods for calculating the performance level Service technicians, programmers and
ff Proficiency with characteristic values planners/application engineers ff Legal principles of machine safety,
(PL, MTTFd, PFHd, B10D, DC, CCF) European directives and standards
ff Basic safety circuits DATES (GERMAN) TRAINING ff ISO 12100 risk assessment
ff Safety principles and requirements under LOCATION ff Basics and application of functional safety per
Automation and
Automation and
Industry 4.0
Industry 4.0
ISO 4413 EN ISO 13849-1 for hydraulic and electrical
May 4 - May 6, 2020 Erbach/
ff Circuit calculation with Sistema technologies
Odenwald
November 23 - November 25, 2020 Erbach/ ff All aspects from safety requirement to validation
LEARNING TARGETS
Odenwald ff CE conformity evaluation procedure
Electric drives
Electric drives
and controls
and controls
ff Knowing how to evaluate and calculate control
systems according to ISO 13849 DATE (ENGLISH) TRAINING LEARNING TARGET
ff Being familiar with safe evaluation in practice LOCATION TARGET GROUP
ff Mastery of the entire CE conformity evaluation
ff Being able to implement safety principles in
September 9 - September 11, 2020 Erbach/ procedure using various examples Service technicians, programmers and
hydraulics and pneumatics
Tightening
Tightening
Odenwald ff Learning functional safety evaluation skills planners/application engineers
systems
systems
ff 10 steps to performance level are practiced using
a comprehensive example -- Calculating the performance level with
Please contact us for more dates and individual Sistema DATES (GERMAN) TRAINING
ff Use of the appropriate valves
training courses. We would be happy to help you. -- Software aspects and validation LOCATION
PREREQUISITE
technology
technology
June 22 - June 26, 2020 Erbach/Odenwald
Welding
Welding
TRAINING TIME PREREQUISITE
Basic knowledge of machine safety November 2 - November 6, 2020 Erbach/Odenwald
3 days:
ff Professional practice in the area of
Day 1 10:00 AM – 4:30 PM
TECHNICAL SPECIFICATION functional safety Please contact us for more dates and individual
Days 2 and 3 8:00 AM – 4:30 PM
Linear motion
Linear motion
and assembly
and assembly
ff Knowledge of the Machinery Directive and training courses. We would be happy to help you.
technology
technology
Please bring a laptop with the latest version of the
risk assessment
Sistema software program (incl. Bosch Rexroth AG PRICE
TRAINING TIME
Hydraulics Library). The software can be
€1,663.00 (net) / €1,978.97 (gross) TECHNICAL SPECIFICATION
downloaded online for free. 5 days:
The included tablet can also be used. The trainer will
Pneumatics
Pneumatics
NOTICE We recommend using a laptop with Sistema software Day 1 10:00 AM – 5:00 PM
provide a server. installed on it. The software can be downloaded Days 2 to 4 8:00 AM – 5:00 PM
If necessary, this training course can also be held in online for free. The included tablet can also be used. Day 5 8:00 AM – 3:00 PM
your subsidiary outside Germany. The trainer will provide a server.
Safety technology
Safety technology
PRICE
We also offer this training course at our Linz
subsidiary in Austria. For information, €1,834.00 (net) / €2,182.46 (gross)
please visit us online at: www.boschrexroth.at
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HT-HS HT-Si
Liability and damages in maintenance during Safety when commissioning and
New training
New training
courses
courses
installation and operation of hydraulic machinery maintaining hydraulic systems
eDrive & Control
Academy
assigned varied new tasks and duties. The state of the art which is arisen in terms of maintenance and setting up of hydraulic systems, which
continuously evolving entails new hazards and critical situations. Keeping manufacturers and operators need to take notice of. In addition, dangerous
calm in such critical situation is a challenge to managers, design engineers situations are becoming increasingly more frequent for people who work
hydraulics
hydraulics
Industrial
Industrial
and service personnel. In this training course, you will learn about the legal with machines. This training course helps you optimize the protection of
requirements around the topic of liability. With this knowledge, you will act health and the availability of systems with practical examples.
safely. Measures for occupational safety that were not taken due to lack of
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
knowledge or caution can have serious consequences.
CONTENTS PREREQUISITE
ff Basics of the Machinery Directive 2006/42/EC Participation in the HTG/eHTB and eHTVT and HTP-1
ff Information on standards, directives, regulations training courses or comparable knowledge
Automation and
Automation and
Industry 4.0
Industry 4.0
and trade association rules
ff Maintenance activities TARGET GROUP
CONTENTS PREREQUISITE
ff Experts, qualified persons according to TRBS 1203
Operators, service technicians, programmers,
ff Awareness of the topic of maintenance safety Completion of the HT-Si or DC-MRL-RB training ff Safety When Commissioning and Maintaining
planners/application engineers
ff Recommendations from practice for the course Hydraulic Systems
Electric drives
Electric drives
and controls
and controls
maintenance procedure ff Hazards when working on hydraulic systems
DATES (GERMAN) TRAINING
ff Comply safely with statutory provisions TARGET GROUP ff Hydraulic control technology, special hazard
LOCATION
ff Minimizing liability risks potentials and sources of interference
Operators, service technicians, programmers,
ff Product liability ff Pressure equipment/hydraulic accumulators, February 10 - February 12, 2020 Würzburg
planners/application engineers, managers and
Tightening
Tightening
ff Liability issues from the areas of mechanical hydraulic line systems June 3 - June 5, 2020 Issum
systems
systems
trainers
engineering, electrotechnology, press ff "Ignorance is no excuse" – Significance for September 29 - October 1, 2020 Hamburg
manufacture and production systems maintenance personnel and their superiors November 23 - November 25, 2020 Würzburg
DATES (GERMAN) TRAINING LOCATION
ff Liability in maintenance incl. standards landscape
and safety aspects June 19, 2020 Würzburg LEARNING TARGET TRAINING TIME
technology
technology
Welding
Welding
ff Information on the risks of personal liability November 26, 2020 Würzburg
ff Gaining an overview of legal regulations and other 3 days:
relevant standards Day 1 10:00 AM – 4:15 PM
LEARNING TARGET Please contact us for more dates and individual
ff Knowledge of the potential danger inherent in Day 2 8:00 AM – 4:15 PM
training courses. We would be happy to help you.
hydraulic systems
Linear motion
Linear motion
and assembly
and assembly
ff Discussing and assessing own examples from Day 3 8:00 AM – 12:30 PM
technology
technology
practice ff Reading, understanding and assessing symbols
TRAINING TIME
ff Taking suitable measures for each situation on the and circuit diagrams according to DIN ISO 13849 PRICE
machine 1 day: 10:00 AM – 4:00 PM ff Being able to recognize hazards and their causes
€1,353.00 (net) / €1,610.07 (gross)
ff Being able to meet the current safety standard ff Eliminating or minimizing sources of danger
Pneumatics
Pneumatics
ff Knowing the own liability environment PRICE ff Knowing how to safely use hydraulic systems
ADVANCED TRAINING COURSES
ff Working safely when troubleshooting
€1,099.00 (net) / €1,307.81 (gross)
ff Liability in maintenance HT-WI
Safety technology
Safety technology
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
HT-BPSp HT-BPSch
Imparting expert knowledge of hydraulic Imparting expert knowledge of hydraulic hoses to
New training
New training
courses
courses
accumulators to persons qualified for examination persons qualified for examination
eDrive & Control
Academy
obliges the employer to commission so-called "persons qualified for wear and stress due to pressure impulses. Therefore, the legislator makes
examination" with the examination of work equipment and systems that special demands on the operator. The person qualified for examination has
require monitoring. They need to have relevant vocational training, work the expert knowledge for carrying out the required tests. Relevant
hydraulics
hydraulics
Industrial
Industrial
experience, as well as be recently active in this profession. It is also required vocational training, work experience, as well as being recently active in this
that by means of participation in training courses and schooling with regard to profession are required.
the work equipment, their expertise is up-to-date. It is also required that by means of participation in training courses and
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS PREREQUISITE
schooling with regard to the work equipment, their expertise is up-to-date.
Mandatory training course according to BetrSichV [Ordinance on Industrial
f Functioning and application areas of f Completion of the HTG/eHTB and eHTVT
hydraulic accumulators training courses or comparable knowledge
Safety and Health].
Automation and
Automation and
f Design structure and functioning f Prior completion of the eHT-BPSp eLearning
Industry 4.0
CONTENTS
Industry 4.0
DATES (GERMAN) TRAINING
f Calculating accumulator capacity course
LOCATION
f Damage symptoms and repair f Refresh the technical and physical basics of
f Delivery condition, transport, storage and TARGET GROUP hydraulics March 24 - March 25, 2020 Würzburg
installation f Converting power and pressure to November 12 - November 13, 2020 Würzburg
Electric drives
Electric drives
Service technicians, trainers
and controls
and controls
f Commissioning, maintenance, disposal hydraulic control
f Accumulator charging circuits f Safety rules for HY hose lines according to Please contact us for more dates and individual
DATES (GERMAN) TRAINING
f Safety equipment DGUV Directive 113-020 training courses. We would be happy to help you.
LOCATION
f Tests, test intervals, test procedures f Safety rules for HY fluids according to
f Legal principles and standards March 16 - March 18, 2020 Würzburg DGUV Directive 113-020 TRAINING TIME
Tightening
Tightening
systems
systems
f Knowledge test on expert knowledge of hydraulic June 17 - June 19, 2020 Issum f Operational Safety Ordinance (BetrSichV)
2 days:
accumulators to persons qualified for examination October 26 - October 28, 2020 Würzburg f Final exam
Day 1 10:00 AM – 4:30 PM
Day 2 8:00 AM – 4:30 PM
LEARNING TARGET Please contact us for more dates and individual LEARNING TARGET
technology
technology
Welding
Welding
training courses. We would be happy to help you.
f Being familiar with hydraulic accumulators as f Construction and application-specific basics of PRICE
important elements of hydraulic systems and HY hose lines
TRAINING TIME €879.00 (net) / €1,046.01 (gross)
components for system improvement f Become familiar with the requirements in terms
f Understanding design structure and functioning 3 days: of the laws, regulations and rules
Linear motion
Linear motion
and assembly
and assembly
ADVANCED TRAINING COURSES
technology
technology
f Understanding the dangers of pressure and Day 1 9:00 AM – 4:30 PM
protection concepts Day 2 8:00 AM – 4:30 PM PREREQUISITE HT-BPSp, HT-WI
f Being familiar with the applicable standards Day 3 8:00 AM – 3:00 PM Refresher course recommended every two years
Experience in dealing with hydraulics
f Being familiar with the relevant content of the
Pneumatics
Pneumatics
Ordinance on Industrial Safety and Health and its PRICE NOTICE
TARGET GROUP
rules and regulations
€1,353.00 (net) / €1,610.07 (gross) You can find the current offer online at:
f Gaining an overview of the Product Safety Act, Operators, service technicians
www.boschrexroth.com/training
Pressure Equipment Directive, and Occupational
ADVANCED TRAINING COURSES
Safety technology
Safety technology
Safety Act
HT-BPSch, HT-WI
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
Bosch Rexroth AG,
Bosch Rexroth AG, R999000291,
R999000291, Version
Version 20-01/EN
20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
306 Safety technology Training Program 2020 | Drive & Control Academy 206 Drive & Control
Electric Academy
drives and | Training Program 2020
controls Training Program 2020 | Drive &Safety
Control Academy
technology 307
New training
New training
courses
courses
courses
Safety technology
Drive-Integrated safety technology
eDrive & Control
Academy
Academy
ELECTRIC DRIVES AND CONTROLS TECHNOLOGY
utilize various safety functions directly in the drive. This training simplifies
dd Basic Training dd Intermediate Training your introduction to drive-integrated safety technology.
hydraulics
hydraulics
hydraulics
2 3
Industrial
Industrial
Industrial
EAT-ID-Si L3/S4 EST-SLc
IndraDrive – Project planning for
Drive-integrated SafeLogic compact
safety technology safety control system
L3/S4/S5/SB
p. 307 p. 308 CONTENTS DATES (GERMAN) TRAINING
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
LOCATION
3 f Hardware overview
EST-SL
SafeLogic –
f Overview of the safety functions May 19 - May 20, 2020 Lohr am Main
Commissioning and (firmware 18VRS or higher) November 10 - November 11, 2020 Lohr am Main
project planning
f Safe Motion commissioning
Automation and
Automation and
Automation and
p. 309
TRAINING TIME
Industry 4.0
Industry 4.0
Industry 4.0
LEARNING TARGET
2 days:
f Understanding different drive-internal Day 1 10:00 AM – 4:30 PM
safety functions Day 2 8:00 AM – 3:00 PM
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
f Being able to parameterize and configure safety
technology using Safe Motion with IndraWorks PRICE
f Being able to replace components
€1,020.00 (net) / €1,213.80 (gross)
PREREQUISITE
Tightening
Tightening
Tightening
NOTICE
systems
systems
systems
f Basic knowledge of electrical engineering
When booking, please specify your firmware version.
f Basic knowledge of electric drives
(EATG-1 training course or similar knowledge)
You can find the current offer online at:
f Computer skills
technology
technology
technology
www.boschrexroth.com/training
Welding
Welding
Welding
f Completion of the EAT-ID-I training course
TARGET GROUP
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
Service technicians, planners/application engineers
technology
technology
technology
Pneumatics
Pneumatics
Pneumatics
Safety technology
Safety technology
Safety technology
@
NEU LW
Energy efficiency
Energy efficiency
Energy efficiency
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
308 Safety technology Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Safety technology 309
EST-SLc EST-SL
Project planning for SafeLogic compact SafeLogic – Commissioning and project planning
New training
New training
courses
courses
safety control system
eDrive & Control
Academy
modular safety control system and its uses. Practical exercises will be used technology. You will learn how to plan, program, commission, diagnose and
to demonstrate how to easily and flexibly configure the system with troubleshoot the entire safety system solution, i.e., MLC, XLC or MTX with
SafeLogic Designer. The course focuses on the interaction between the "Safety" function module through drive-integrated safety technology
hydraulics
hydraulics
Industrial
Industrial
SafeLogic compact and the drive-integrated safety technology (S4/S5/SB). with IndraDrive with SafeMotion (S4/S5/SB) and decentralized Safety I/Os.
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
CONTENTS TARGET GROUP CONTENTS PREREQUISITE
ff Structure and functional principle of Service technicians, programmers, ff Properties of the Safety function module ff Basic knowledge of machine safety
SafeLogic compact planners/application engineers ff IndraDrive variants with SafeMotion V2 ff Completion of the EAT-ID-Si/EAT-ID-Si L3/S4
ff Device designs and accessories ff Commissioning and project planning for training course or comparable knowledge
Automation and
Automation and
DATES (GERMAN) TRAINING
Industry 4.0
Industry 4.0
ff Working with the SafeLogic Designer project SafeLogic
planning tool LOCATION -- Creating a IndraWorks project with MLC and TARGET GROUP
ff Integration of the safe drive technology IndraDrive FM Safety
January 21 - January 23, 2020 Erbach/Odenwald Service technicians, programmers,
ff Data exchange with the standard control system -- Configuring and parameterizing decentralized
October 20 - October 22, 2020 Erbach/Odenwald planners/application engineers
via Sercos Safety I/Os
Electric drives
Electric drives
and controls
and controls
ff Service tasks (replacing components, -- Configuring and parameterizing an IndraDrive
DATE (ENGLISH) TRAINING DATES (GERMAN) TRAINING
compatibility) with CSos
LOCATION LOCATION
-- Implementing safety functions in the
LEARNING TARGET January 28 - January 30, 2020 Erbach/Odenwald Safety Manager March 3 - March 5, 2020 Erbach/
Tightening
Tightening
October 27 - October 29, 2020 Erbach/Odenwald -- Loading and starting safety applications Odenwald
systems
systems
ff Understanding the functionality of the modular
-- Global variables for exchanging data SafeLogic September 8 - September 10, 2020 Erbach/
SafeLogic compact safety control system
TRAINING TIME MLC/MTX Odenwald
ff Being able to create projects using SafeLogic
ff Troubleshooting and diagnosis
Designer 3 days:
ff Programming guidelines for safety programming DATE (ENGLISH) TRAINING
technology
technology
ff Understanding diagnostics and troubleshooting Day 1 10:00 AM – 4:30 PM
Welding
Welding
LOCATION
Day 2 8:00 AM – 4:30 PM
LEARNING TARGET
PREREQUISITE Day 3 8:00 AM – 3:00 PM March 10 - March 12, 2020 Erbach/
ff Being familiar with the entire Rexroth safety Odenwald
ff Basic knowledge of machine safety
Linear motion
Linear motion
and assembly
and assembly
PRICE system solution September 15 - September 17, 2020 Erbach/
technology
technology
ff Completion of the EAT-ID-Si L3/S4 training course
ff Knowing how to use Inline Safety I/Os Odenwald
€1,440.00 (net) / €1,713.60 (gross)
ff Knowing how to use IndraDrive with CIP Safety
on Sercos TRAINING TIME
ff Knowing how to implement safety functions in the
Pneumatics
Pneumatics
3 days
Safety Manager
Day 1 10:00 AM – 4:30 PM
ff Knowing how to back up and restore data
Day 2 8:00 AM – 4:30 PM
ff Knowing how to diagnose the entire system
Day 3 8:00 AM – 3:00 PM
Safety technology
Safety technology
PRICE
Energy efficiency
@ @
Notes
Safety technology
Contents NOTICE
New training
New training
The learning paths for your individual training plan can be
courses
courses
found in the respective thematic areas in this chapter.
eDrive & Control
Academy
Page Code Training Method Duration (days) Operators Service technicians Programmers Planners/application Managers Trainers
Systems operators Service personnel Software Decision-makers Teachers
Face-to-face engineers
training Assembly personnel Maintenance personnel developers Executives Trainers
Project engineers
Commissioning engineers IT specialists Plant managers
Developers/design engineers
Mechanical engineers Commissioning Proprietors
eLearning Technical sales
Electricians engineers Buyers
hydraulics
hydraulics
Industrial
Industrial
BASIC TRAINING
315 e4EE Basic knowledge of energy efficiency ● ● ● ● ● ●
Mobile electronics
Mobile hydraulics
Mobile hydraulics
INTERMEDIATE TRAINING
NEW 317 EH-SYT_SvP_I@ Sytronix SvP – Basics, parameterization and commissioning ● ● ● ●
NEW 319 DC-EE-INNO@EtaFab 4EE Innovation day at the energy efficiency factory (EtaFab) ● ●
Automation and
Automation and
Industry 4.0
Industry 4.0
NEW 320 DC-EE@Skype 4EE Online training – Energy efficiency in production and infrastructure 8 dates, 2 hours each ● ●
Energy efficiency training – Combined module: "Machines, systems, facilities (MAE) and
NEW 321 DC-EE-MAE-FCM infrastructure (FCM)"
●
Electric drives
and controls
drives and
controls
Electric
Tightening
Tightening
systems
systems
technology
technology
Welding
Welding
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Pneumatics
Pneumatics
Safety technology
Safety technology
efficiency
efficiency
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
314 Energy efficiency Training Program 2020 | Drive & Control Academy 38 Drive
eDrive& &Control
ControlAcademy
Academy| Training Program 2020 Training Program 2020 | Drive &Energy
Controlefficiency
Academy 315
New training
New training
courses
courses
courses
Energy efficiency
eDrive & Control
Academy
Academy
BASIC TRAINING INTERMEDIATE TRAINING
Intelligent automation solutions become more and more important.
dd Sytronix Prerequisites are familiarity with energy efficiency and how it can be
implemented effectively. In this eLearning course, we provide you with the
NEU
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
2
e4EE EH-SYT_SvP_I@ necessary basic knowledge.
Basic knowledge Sytronix SvP – Basics,
of energy efficiency parameterization and
(eLearning) commissioning
Mobile electronics
Mobile electronics
p. 315 p. 317
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
NEU 2 f Energy, a scarce resource During the license term, the eLearning is available
e4EE Sytronix
Energy efficiency
EH-SYT_FcP_IN@
Sytronix FcP/DRN 5020
f Definition of energy efficiency at any time. The license period is 12 months after
of variable-speed
pump drives
– Parameterization and f Basic conditions activation.
commissioning
(eLearning)
f Energy efficiency in the company
Automation and
Automation and
Automation and
p. 316 p. 318
Industry 4.0
Industry 4.0
Industry 4.0
f 4EE concept from Rexroth Duration: approx. 1 to 2 hours
f Useful facts about energy efficiency
AVAILABLE LANGUAGES
LEARNING TARGET
dd Energy efficiency analysis of production plants with Rexroth 4EE German, English
Electric drives
Electric drives
and controls
and controls
f Understanding the importance of energy efficiency
drives and
controls
Electric
NEU 1 to society and companies PRICE
DC-EE-INNO@EtaFab f Knowing the 4EE concept from Rexroth for
4EE Innovation day at This e4EE eLearning course is available as
the energy efficiency optimizing energy efficiency
factory (EtaFab) a single-user or multi-user license.
f Understanding the typical approaches to
Tightening
Tightening
Tightening
systems
systems
systems
p. 319
system optimization
€23.00 (net) / €27.37 (gross)
NEU f Understanding the costs and benefits of
e4EE DC-EE@Skype per year
Basic knowledge 4EE Online training
energy-efficient solutions
of energy efficiency – Energy efficiency
(eLearning) in production and Price for multi-user licenses upon request
technology
technology
technology
PREREQUISITE
Welding
Welding
Welding
infrastructure
p. 315 p. 320
NEU 3
f Technical understanding
DC-EE-MAE-FCM f PC with Internet access, Flash Player 10 or
Energy efficiency training
– Combined module:
higher: http://get.adobe.com/de/flashplayer
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
"Machines, systems,
technology
technology
technology
facilities (MAE) and
infrastructure (FCM)" f email address for personal login
p. 321
TARGET GROUP
Pneumatics
Pneumatics
planners/implementers, managers, trainers
Safety technology
Safety technology
Safety technology
@
NEU LW
Energy efficiency
@
efficiency
efficiency
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
316 Drive
Energy& Control Academy | Training Program 2020
efficiency Training Program 2020eDrive
| Drive&&Control
ControlAcademy
Academy 96 39 Drive & Control
Industrial Academy | Training Program 2020
hydraulics Training Program 2020 | Drive &Energy
Controlefficiency
Academy 317
New training
New training
New training
courses
courses
courses
courses
Basics, parameterization and commissioning
eDrive & Control
Academy
Academy
Academy
hydraulics and the energy efficiency and dynamics of compact electronics go drive. You will become familiar with the hardware and software properties of
hand in hand. In the e4EE Sytronix eLearning course, we provide you with the the products, as well as the optimization options for the Sytronix drive.
necessary basic knowledge and technical background as well as specialist One of the practical tasks is commissioning a Sytronix drive. The course also
hydraulics
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
Industrial
knowledge pertaining to the "Smart interplay of hydraulics and electronics". focuses on communication with the higher control system. Participants are
required to bring their own laptops to be able to work with the software tool
CONTENTS PREREQUISITE and forms.
Mobile electronics
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
f Energy, a scarce resource f Completion of the HTG/eHTB and eHTVT, EATG-1
f Definition of energy efficiency and HTPPu training courses or comparable
f Basic conditions knowledge
CONTENTS TARGET GROUP
f Energy efficiency in the company f PC with Internet access, Flash Player 10 or
Automation and
Automation and
Automation and
Automation and
f 4EE concept from Rexroth higher: http://get.adobe.com/de/flashplayer
Industry 4.0
Industry 4.0
Industry 4.0
Industry 4.0
f System introduction Service technicians, planners/application engineers,
f Useful facts about energy efficiency f Email address for personal login f Hardware and software overview of the managers and trainers
f Valve and displacer control SvP 7020 system
f Demand control TARGET GROUP f Operating modes DATES (GERMAN) TRAINING
f Components of variable-speed pump drives f Back-up and restore LOCATION
Electric drives
Electric drives
Electric drives
and controls
and controls
and controls
Operators, service engineers, programmers,
drives and
controls
Electric
f Parameters for selecting such drives f Commissioning the components
planners/implementers, managers, trainers April 15 - April 16, 2020 Würzburg
f Circuit examples f Diagnostics and troubleshooting on the
November 3 - November 4, 2020 Würzburg
f System comparison training system
TRAINING TIME
f Practical exercises
DATE (ENGLISH) TRAINING
Tightening
Tightening
Tightening
Tightening
LEARNING TARGET During the license term, the eLearning is available
systems
systems
systems
systems
LOCATION
at any time. The license period is 12 months after LEARNING TARGET
f Understanding the importance of energy efficiency
activation. October 15 - October 16, 2020 Würzburg
to society and companies f Being able to commission the system
f Knowing the 4EE concept from Rexroth for f Knowing how to replace components (IndraDrive C,
Duration: approx. 3 to 4 hours Please contact us for more dates and individual
technology
technology
technology
technology
optimizing energy efficiency motor, pump, mechanics and sensors)
Welding
Welding
Welding
Welding
training courses. We would be happy to help you.
f Knowing typical approaches to system f Knowing the features of IndraDrive C servo drives
AVAILABLE LANGUAGES
optimization f Knowing how to troubleshoot
TRAINING TIME
f Understanding the costs and benefits of German, English f Knowing about sensors in hydraulic systems
Linear motion
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
and assembly
energy-efficient solutions 2 days:
technology
technology
technology
technology
f System knowledge PRICE PREREQUISITE Day 1 10:00 AM – 4:30 PM
f Knowing how to adjust the operating behavior of Day 2 8:00 AM – 3:00 PM
This e4EE Sytronix eLearning course is available as f Basics of hydraulics
individual components
a single-user or multi-user license. f HTPPu pump training
f Being familiar with project planning aids for PRICE
Pneumatics
Pneumatics
Pneumatics
Pneumatics
f EAT-ID-I, EAT-ID-Kompakt training courses
designing entire systems
€66.00 (net) / €78.54 (gross) per year f Computer skills €1,020.00 (net) / €1,213.80 (gross)
f Knowing about work cycles and possibilities of
f Technical understanding of electrical engineering
energy recovery
Price for multi-user licenses upon request and hydraulics concepts NOTICE
f Knowing how power units are designed
Safety technology
Safety technology
Safety technology
Safety technology
f Being able to select drive components You can find the current offer online at:
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
Energy efficiency
@ @
efficiency
efficiency
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
318 Drive & efficiency
Energy Control Academy | Training Program 2020 Training Program 2020 | Drive & Control
Industrial Academy
hydraulics 97 Drive & Control Academy | Training Program 2020 Energy efficiency 319
EH-SYT_FcP_IN@
EH-SYT_FcP_IN@ DC-EE-INNO@EtaFab
Sytronix FcP/DRN 5020 – 4EE Innovation day at the
New training
New training
New training
courses
courses
courses
Parameterization and commissioning energy efficiency factory (EtaFab)
eDrive & Control
Academy
Academy
DRn 5020 Sytronix drives. You will become familiar with the hardware and University of Darmstadt containing machines and processes for chipping,
software properties of the products as well as the optimization options for cleaning and heat treating. The research has resulted in energy savings of
the drives. One of the practical tasks is commissioning the Sytronix drives. approx. 40 percent through a holistic approach and interconnection of all
hydraulics
hydraulics
hydraulics
Industrial
Industrial
Industrial
The course also focuses on communication with the higher control system. subsystems.
Participants are required to bring their own laptops to be able to work with
the software tool and forms. CONTENTS DATES (GERMAN) TRAINING LOCATION
Mobile electronics
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
Mobile hydraulics
ff Energy controlling June 24, 2020 Darmstadt
ff Technical solutions for machines and
infrastructure facilities TRAINING TIME
CONTENTS TARGET GROUP
ff Thermal interaction between the factory building,
1 day: 9:00 AM – 4:00 PM
Automation and
Automation and
Automation and
Industry 4.0
Industry 4.0
Industry 4.0
f System introduction Service technicians, planners/application engineers building technology and process chain
f Hardware and software overview of the and trainers ff Transfer of innovations from the Eta Factory to
PRICE
FcP 5020 system practice
f Functionality and properties of the system DATES (GERMAN) TRAINING €380.00 (net) / €452.20 (gross)
components LOCATION LEARNING TARGET
Electric drives
Electric drives
and controls
and controls
drives and
controls
Electric
f Parameterization of the EFC5610 frequency NOTICE
August 31 - September 1, 2020 Würzburg ff Being familiar with the technical solutions offered
converter
December 3 - December 4, 2020 Würzburg by the Eta Factory Are you already familiar with the "Handbook for
f Practical exercises on the training system
ff Being able to deduce the potential for the factory Energy Efficiency, Methods for Increasing Energy
f Commissioning an EFC5610
DATE (ENGLISH) TRAINING ff Being familiar with the current state of research Efficiency at Industrial Firms" from Bosch Rexroth,
Tightening
Tightening
Tightening
systems
systems
systems
LOCATION on the topic of energy efficiency and energy ISBN 9-783981-639889?
LEARNING TARGET
flexibility
December 14 - December 15, 2020 Würzburg
f Knowing the basics of asynchronous motors on You can find the current offer online at:
frequency converters PREREQUISITE www.boschrexroth.com/training
Please contact us for more dates and individual
technology
technology
technology
f Knowing how to commission and parameterize
Welding
Welding
Welding
training courses. We would be happy to help you. A basic technical understanding of machinery and
the system
production processes is beneficial. So is knowledge
f Knowing the basics of hydraulic fixed and variable
TRAINING TIME of infrastructure and building technology.
displacement pumps
Linear motion
Linear motion
Linear motion
and assembly
and assembly
and assembly
f Knowing about sensors in hydraulic systems 2 days:
technology
technology
technology
TARGET GROUP
Day 1 10:00 AM – 4:30 PM
PREREQUISITE Day 2 8:00 AM – 3:00 PM Energy managers, energy and environmental
protection officers, machine planners, production
f Basics of hydraulics
PRICE planners, process planners, maintenance personnel,
Pneumatics
Pneumatics
Pneumatics
f HTPPu pump training
contractors
f Computer skills €1,020.00 (net) / €1,213.80 (gross)
f Technical understanding of electrical engineering
and hydraulics concepts NOTICE
Safety technology
Safety technology
Safety technology
f Basic knowledge of frequency converters
You can find the current offer online at:
www.boschrexroth.com/training
@ @
NEU LW NEU LW
Energy efficiency
@ @
efficiency
efficiency
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
320 Energy efficiency Training Program 2020 | Drive & Control Academy Drive & Control Academy | Training Program 2020 Energy efficiency 321
DC-EE@Skype DC-EE-MAE-FCM
4EE Online training – Energy efficiency in Energy efficiency training – Combined module: "Machines,
New training
New training
courses
courses
production and infrastructure systems, facilities (MAE) and infrastructure (FCM)"
eDrive & Control
Academy
for production facilities and infrastructure: What systems are energy- energy-saving measures for production facilities and infrastructure. In the
intensive? What savings options exist? What is worthwhile? The solutions Eta Factory, you can experience innovative solutions up close.
will be explained using real examples.
hydraulics
hydraulics
Industrial
Industrial
CONTENTS TARGET GROUP CONTENTS DATES (GERMAN) TRAINING LOCATION
Mobile electronics
Mobile electronics
Mobile hydraulics
Mobile hydraulics
ff Holistic energy efficiency potential analysis Energy managers, energy and environmental ff Holistic energy efficiency potential analysis May 12 - May 14, 2020 Darmstadt
ff Employee awareness protection officers, machine and production ff Employee awareness
ff 4EE principles and solutions for machinery and planners, facility managers, maintenance personnel, ff 4EE principles and solutions for machinery and TRAINING TIME
infrastructure machine buyers, contractors infrastructure
3 days:
Automation and
Automation and
Industry 4.0
Industry 4.0
ff Practical examples, incl. machine tools, painting, ff Practical examples (machine tool, painting, HVAC)
Day 1 9:30 AM – 4:30 PM
cleaning, HVAC DATES (ENGLISH) and workshops on the topics taught (energy
Day 2 8:30 AM – 4:30 PM
networking, monitoring and innovation transfer)
Every Tuesday and Thursday from Day 3 8:30 AM – 2:30 PM
LEARNING TARGET
October 6 - October 29, 2020 via Skype
LEARNING TARGET
Electric drives
and controls
drives and
controls
Electric
of integrated potential analysis TRAINING TIME ff Understanding the basic principles and methods
€950.00 (net) / €1,130.50 (gross)
ff Knowing the importance and contribution of of integrated potential analysis
8:00 –10:00 AM (APA region)
employees to saving energy and of tools for ff Knowing the importance and contribution of
3:00 PM–5:00 PM (AME region) NOTICE
increasing awareness employees to saving energy and of tools for
Tightening
Tightening
systems
systems
ff Knowing and being able to apply possibilities for increasing awareness Are you already familiar with the "Handbook for
PRICE
energy efficiency for new and current equipment, ff Knowing and being able to apply possibilities for Energy Efficiency, Methods for Increasing Energy
and in infrastructure €700.00 (net) / €833.00 (gross) energy efficiency for new and current equipment, Efficiency at Industrial Firms" from Bosch Rexroth,
ff Knowing examples of best practice with regard to and in infrastructure ISBN 9-783981-639889?
technology
technology
energy-efficient and energy-optimized equipment NOTICE
Welding
Welding
and infrastructure PREREQUISITE
Are you already familiar with the "Handbook for
Energy Efficiency, Methods for Increasing Energy Basic technical understanding of machines and
PREREQUISITE
Efficiency at Industrial Firms" from Bosch Rexroth, production processes as well as infrastructure and
Linear motion
Linear motion
and assembly
and assembly
technology
technology
Basic technical understanding of machines and ISBN 9-783981-639889? facilities is an advantage
production processes as well as infrastructure and
facilities is an advantage TARGET GROUP
Pneumatics
protection officers, machine and production
planners, facility managers
Safety technology
Safety technology
@ @
NEU LW NEU LW
@ @
efficiency
efficiency
Energy
Energy
Bosch Rexroth AG, R999000291, Version 20-01/EN Bosch Rexroth AG, R999000291, Version 20-01/EN
Linear motion
Energy and assembly Welding Tightening Electric drives Automation and Mobile hydraulics Industrial eDrive & Control New training
efficiency Safety technology Pneumatics technology technology systems and controls Industry 4.0 Mobile electronics hydraulics Academy courses
322
Notes
Energy efficiency
TRAINING COURSES
Which requirements and prior knowledge do I need to participate
in a training course?
The training descriptions include the prerequisites for participating in
the training course (e.g., completion of basic training or eLearning
courses). Some of this knowledge can also be obtained through
practical workplace experience.
A grasp of technical concepts is usually sufficient to attend basic
training courses.
TRAINING LOCATIONS These may be used during the training course. For all other training REXROTH LEARNWORLD (LEARNING SERVER)
courses, printed training documents will be provided (work folder). Why does the booking contact also get a login for the learning
Our training sessions are offered at various locations in Germany, Why do I receive login information for the Rexroth LearnWorld in server even though they are not participating in the training
Switzerland, Austria and the Netherlands. More detailed information Can I use the tablet after training for my own purposes? my registration confirmation? themselves?
on our training locations can be found at The payment of the training fee transfers ownership of the tablet to This personal login is used for logging in to the Bosch learning server After logging in to Rexroth LearnWorld, the booking contact can
www.boschrexroth.com/traininglocation. the customer. This means the device becomes the property of the where you will have access to location information and any training see all training courses scheduled for the assigned employees under
customer. The company can then decide on the subsequent use of documents, reference material, etc. In order to be able to use this, "My Profile" in the "My Staff’s Courses" section. This gives the
Do the contents of identical training sessions at different the tablet. the participant's personal email address has to be specified. If you booking agent an overview of which bookings have been confirmed.
locations differ? did not specify an email address, we ask you to submit it after After clicking on the training course for an employee, the booking
The location does not influence the contents of the training. If a Will I receive a discount if I bring the tablet to a later training registering. contact also has access to information on the training location, such
training course (e.g. HTG) is offered at different locations, there are program? as the hotel list, and can thus book the hotels for the participants.
no differences regarding the contents compared to the identical If you have already purchased a tablet for one of our training courses Why can I not request a password after clicking on the URL in the
training at another location. and bring it to a later course, you will receive a price discount of course registration confirmation? Do I have to log in to the learning server?
50 euros. Please notify us in advance if this is the case. The password request will only work if the participant's personal What advantages do I have if I register?
Where can I park my car during the training? email address has been specified. If the participant’s email address As soon as you have received a course registration confirmation from
Parking is free at our training locations. In some cases, you have to Can I also get the training documents from previous training has not been specified in the registration form, we ask you to submit us, you are also registered for the training without logging in to the
display a parking permit behind the vehicle’s windshield. If this is the courses (before 2014) in electronic form? it later. If the participant does not have a business email address, you learning server. For the advantages of the Bosch Rexroth LearnWorld,
case at your training location, you can find the parking permit on our You can view the documents from past training courses in electronic can alternatively specify a private email address or a company please refer to page 13 or www.boschrexroth.com/learnworld.
learning server under "My Training" once you have logged in. form by logging into LearnWorld (under "My LearnWorld Training"). email address. Should you have any further questions about LearnWorld, feel free to
If you cannot find the documents for a particular training course Please note that the link to the password request is only valid for contact us.
Where do I get the directions to the training locations? there, please contact us. 24 hours. If you want to request the password after expiry of the
You can find the directions for the relevant training location on the 24 hours, please contact us (training@boschrexroth.de). We will then
learning server under "My Training" once you have logged on or at Who is my contact for tablet warranty/repair? send you a new link for the password request.
www.boschrexroth.com/traininglocation. Please contact the tablet suppliers directly. You can find the contact
information on the warranty and service certificate which come with
the tablet. Bosch Rexroth cedes all warranty rights against the tablet
suppliers to the customer as the owner of the tablet.
REGISTRATION AND CANCELLATION
Do I get a certificate after completing the training?
How do I register for a training course?
The trainer will hand out a certificate on the last day of the training if
In writing: Online, using the fax registration form or by email to
it has been completed (at least 75% attendance).
training@boschrexroth.de. Registration forms are available at
After the training you can also find your certificates in LearnWorld
www.boschrexroth.com/training.
under "My Profile > Show Certificates".
Why do I receive login information for the Rexroth LearnWorld in How much does a training course cost?
my registration confirmation? For the amount of training fee, please refer to the training description
This personal login is used for logging in to the Bosch learning server for each course in this catalog. The training fee includes
where you will have access to location information and any training comprehensive training documents, auxiliary materials, snacks, and
documents, reference material, etc. In order to be able to use this, lunch. We will send the invoice to your company once you have
the participant's personal email address has to be specified. If you completed the training course. Please inform us if there is a different
did not specify an email address, we ask you to submit it after invoice address before the training.
registering.
8.2. If the customer is an entrepreneur, public law legal person or 1.2 Both for events in the training program and also for special if applicable, will be retained per participant. This also applies if required on the Goods subject to retention of title, the customer
public law special fund, the courts of Stuttgart, Germany, shall events, Bosch shall perform the Training Services either a registered participant fails to attend. Fees that have already shall conduct this work in good time at its own expense.
have exclusive jurisdiction over all legal disputes arising out of independently itself or through third parties engaged by Bosch. been paid will be refunded if the notice of revocation is given in
or in connection with these Terms and Conditions. Bosch has The scope, form, topics and target of the training will be good time, provided that the obligation to pay the training fee 2.3 The customer is not entitled to make any other dispositions of
the right to take legal action at a court with jurisdiction at the specified in the training program or stipulated in an explicit ceases to apply in accordance with this provision. the items in which Bosch has retained title or holds joint title or
principal place of business/establishment of the customer. The agreement between the parties. with regard to accounts receivable which have been assigned to
same applies if the customer is not is subject to general 3.2. The customer can nominate a substitute for the registered Bosch. Any attachments or other impairments to the rights in
jurisdiction in Germany or if his domicile or habitual residence 1.3 If the number of registrations for an event is insufficient participant free of charge. The respective Provider must be the items partially or fully owned by Bosch must be notified to
is unknown at the time when the legal action is brought. according to the minimum number of participants envisaged for notified of this in writing or in text form prior to commencement Bosch by the customer without undue delay. The customer shall
a training event or if it is not possible to conduct a training of the training event. Rebooking for a different training date or a bear all the costs which have to be expended on cancelling the
8.3. The contractual relationships between the parties is governed event in a proper manner for other reasons for which Bosch is different training event is permissible at any time in writing or in attachment by third parties of the items in which Bosch has
by the law of the Federal Republic of Germany. If the customer not accountable, e.g. if the trainer is ill, Bosch has the right to text form, but only once per customer and for one training event reserved title or owns as security and which have to be
is a consumer, this choice of law applies only insofar as the cancel training events or to postpone them or to conduct them booked by that customer. If individual training units are not expended on recovering the item, insofar as these cannot be
protection afforded is not withdrawn by mandatory provisions on a different date to be agreed. If a training event is cancelled attended, this does not entitle the customer to reduce the collected from third parties.
of the law of the country in which the customer has his habitual by Bosch, any training fees already paid to Bosch will be invoice amount unless non-attendance was due to the fault of
residence (principle of favorability [Günstigkeitsprinzip]). The refunded in full. Any claims for compensation or consequential the Provider. 2.4 If the value of the security existing for Bosch should exceed
application of the UN Treaty on Contracts for the International costs incurred by the customer or third parties due to the Bosch’s claims by more than 10 % overall, Bosch shall, if so
Sale of Goods (CISG) is excluded. cancellation or postponement of training events or individual 3.3. If the event of failure to attend, the training documents will not requested by the customer, release security at Bosch’s election
lessons are precluded in any event. be provided either in print or by electronic media. to this extent.
8.4. Export Compliance: The parties mutually agree that each party
is itself responsible for compliance with the import and export 1.4 Prior to or during the training event, Bosch has the right to 3.4. Bosch, however, has the right to exclude a participant from a
regulations respectively applicable to that party. All the Services undertake any content-related, methodological and training event without refunding the training fees if the IV. Right of withdrawal
by Bosch are subject to the proviso that the performance organizational changes or deviations that are necessary, insofar participant behaves in a manner so as to permanently jeopardize
thereof is not opposed by any impediments due to national or as these do not considerably alter or eliminate the use for the achievement of the training purpose by other participants or so If the customer is a consumer, the customer is entitled to a
international export control regulations, in particular to customer of the training event booked. Lecturers who may have as to violate the regulatory and security regulations applying at statutory right of withdrawal. The conditions and legal
embargos or other sanctions. Bosch has the right to terminate been planned in advance can, in case of need, be replaced by the event venue. If a participant is excluded, the refund of the consequences of the withdrawal are set forth for Training Services
the contract without notice if the termination is necessary in other persons who are similarly qualified in relation to the training fee and of any other expenditures made on participation in sub-section IV.1. below and for supplies of Goods in sub-section
order for Bosch to comply with national or international legal notified subject. This does not entitle the customer either to at the training event is precluded. IV.2. of these Terms and Conditions.
regulations. In the event of such termination, the customer is withdraw from the contract or to reduce the training fee.
precluded from claiming damages or other rights due to the
termination. 1.5 If training materials are provided on electronic media, 4. Prices and payment (supplementing section I.3.) 1. Withdrawal from Training Services
e.g. tablets, Bosch shall provide the customer with the
8.5. Information on online dispute resolution: The European manufacturer’s contact data incl. proof of the guarantee and 4.1. For the customer, the training fees include participation at the – Instructions on the right of withdrawal –
Commission provides a platform for online dispute resolution service of the device provided. Bosch shall transfer its warranty training event, use of the technical equipment provided for
(ODR). This platform is intended to serve as a point of contact rights vis-à-vis the device supplier in full to the customer as the learning purposes, the training materials and, if offered, catering You have the right to withdraw from this contract within fourteen days
for the extrajudicial resolution of disputes relating to owner of the device. during breaks and one lunch per full-day seminar. Travel and without stating the grounds.
contractual obligations of online purchase contracts and online accommodation expenses of the participant are not included.
service contracts. The platform can be accessed at: The period for withdrawal is fourteen days from the date on which the
http://ec.europa.eu/consumers/odr/. 2. Support for educational measures 4.2. The attendance fees for special events shall be agreed in writing. contract was entered into.
Notice pursuant to section 36 German Act on Alternative
Dispute Resolution in Consumer Matters It may be possible to apply for vocational training support for In order to exercise your right of withdrawal you have to make an
(Verbraucherstreitbeilegungsgesetz (VSBG)): Bosch is not the Training Services offered. Applications are to be filed to the III. Special Terms and Conditions for goods ordered online unequivocal statement (e.g. a letter sent by post, telefax or e-mail) to
obliged to take part in dispute resolution procedures before a German Federal Labor Agency (Bundesagentur für Arbeit) or to
consumer conciliation body and has decided against taking part the Job Centers (Jobcenter) in accordance with the Directives The following special Terms and Conditions apply in addition to Bosch Rexroth AG
therein on a voluntary basis. of the Third Book of the German Social Security Code (SGB III). the general provisions set out in section I above to all goods of the Zum Eisengiesser 1
Measures which are given this support are promoted by funding Provider which the customer orders online (hereinafter: "Goods"). 97816 Lohr am Main, Germany
the training fees by means of so-called "educational checks" or If the customer is an entrepreneur, the General Terms and E-mail: info@boschrexroth.de
II. Special Terms and Conditions for Training Services by direct payment of the costs by the entity providing the Conditions for Supplies and Services of the Provider, available at: Telephone: + 49 9352 180
support. The customer has to secure the support in advance https://www.boschrexroth.com/de/de/home/rechtliche-hinweise, (on working days on Mondays to Fridays
The following Special Terms and Conditions apply in addition to together with the advisor responsible for the customer at the apply in addition unless otherwise stipulated in these Terms and from 08:00 am to 5:00 pm)
the general provisions set out in section I above to all German Federal Labor Agency. The costs are owed by the Conditions.
performance rendered as Services, irrespective of whether they customer in any case. If the vocational support for the customer informing them of your decision to withdraw from this contract. You can
are offered online or as events with physical attendance to participate at the training event booked is not given approval, also use the attached specimen Withdrawal Form for this, but that is not
(e.g. guided tours, workshops, coaching, webinars etc.) then the customer can only withdraw from the contract free of 1. Warranty mandatory. In order to meet the deadline for withdrawal, it suffices if you
(hereinafter: "Training Service(s)"). charge in accordance with section II.3. send the notification that you are exercising your right of withdrawal
If the customer is a consumer, the statutory claims for defects before the withdrawal period expires.
shall apply.
1. Conducting Training Services 3. Revocation and rebooking of Training Services Consequences of withdrawal
1.1 The commencement time, duration and venue of the Training 3.1. The customer can revoke the contract free of charge by giving 2. Retention of title If you withdraw from this contract we shall reimburse to you all
Service can be found in the training program valid at the time notice in writing or in text form to the Provider at least three payments we have received from you, including the costs of delivery
when the order is placed or, with respect to special events, they calendar weeks’ (21 days) prior to commencement of a training 2.1 Bosch reserves title in and to the Goods until the purchase (with the exception of the additional costs resulting from your choice of
shall be agreed separately between the parties. The customer is event. The decisive date for compliance is the date on which the price is paid in full. a type of delivery different to the least expensive standard delivery
obliged to comply with any regulatory and security regulations notice of revocation is received by the Provider. If the notice of offered by us), without undue delay and not later than fourteen days from
that apply at the event venue. revocation from the contract is not given in good time, 100 % of 2.2 Pending transfer of title, the customer is obliged to treat the the day on which we received the notification of your withdrawal from
the training fee plus the statutory amount of VAT due thereon, Goods with care. If any maintenance and service work is this contract. We shall carry out such reimbursement using the same
Registration form
means of payment as you used for the initial transaction, unless explicitly You have to return or hand over the Goods to us without undue delay and
agreed otherwise with you; in no event will you incur any charges as a in any event not later than fourteen days from the day on which you
result of this reimbursement. If you have requested that the Services notified us of your withdrawal from this contract. The deadline is met if
commence during the withdrawal period, you shall pay us a reasonable you dispatch the Goods before the fourteen-day period expires.
amount corresponding to the share of the Services already rendered,
compared with the total scope of the Services provided for under the You shall bear the direct costs of returning the Goods. You shall only Please complete the form and e-mail it to training@boschrexroth.de.
contract, up until the time when you notified us that you were exercising
your right to withdraw from this contract.
bear any loss of value of the Goods if such loss of value is due to
handling the Goods in a manner that is not necessary for an examination
Information and registration also at: www.boschrexroth.com/academy
into the quality, characteristics and functioning of the Goods.
– End of the Instructions on the right of withdrawa –
– End of the Instructions on the right of withdrawal –
In order to exercise your right of withdrawal you have to make an If you wish to withdraw from the contract, kindly complete and return
unequivocal statement (e.g. a letter sent by post, telefax or e-mail) to this form
Registering party – Last name, first name Division
Bosch Rexroth AG To: Bosch Rexroth AG
Zum Eisengiesser 1 Zum Eisengiesser 1
97816 Lohr am Main, Germany 97816 Lohr am Main, Germany
E-mail: info@boschrexroth.de E-mail: info@boschrexroth.de Phone Email address
Telephone: + 49 9352 180 Telephone: + 49 9352 180
(on working days on Mondays to Fridays (on working days on Mondays to Fridays
from 08:00 am to 5:00 pm) from 08:00 am to 5:00 pm)
informing them of your decision to withdraw from this contract. You can I/we (*) hereby withdraw from the contract entered into by me/us (*) on
also use the attached specimen Withdrawal Form for this, but that is not the purchase of the following Goods (*)/ performance of the following Registering party – Company Billing address – Company (if different)
mandatory. In order to meet the deadline for withdrawal, it suffices if you Service (*):
send the notification that you are exercising your right of withdrawal
before the withdrawal period expires. Ordered on (*)/received on (*):
Street/P.O. box Contact, department
Consequences of withdrawal Your name:
If you withdraw from this contract, we shall reimburse to you all Your address:
payments we have received from you, including the costs of delivery Zip code, city, country Street/P.O. box
(with the exception of the additional costs resulting from your choice of Your signature (only if the notification is on paper)
a type of delivery different to the least expensive standard delivery
offered by us), without undue delay and not later than fourteen days from Date
the day on which we received the notification of your withdrawal from (*) Delete or complete as applicable Order number (if available) Zip code, city, country
this contract. We shall carry out such reimbursement using the same
means of payment as you used for the initial transaction, unless explicitly
agreed otherwise with you; in no event will you incur any charges as a
result of this reimbursement.
Date, signature By signing this form, I accept the general conditions for the
We can refuse to carry out the reimbursement until the Goods have been training courses of Bosch Rexroth AG (last update 09/2019):
returned and received by us or until you have demonstrated that you
returned the Goods, depending on whichever is the earlier.
Registration is only complete upon confirmation from Bosch Rexroth AG.
Registration form
Please complete the form and e-mail it to training@boschrexroth.de.
Information and registration also at: www.boschrexroth.com/academy
Date, signature By signing this form, I accept the general conditions for the
training courses of Bosch Rexroth AG (last update 11/2019):