You are on page 1of 2

Down Town Project BTK ENGINEERING & TRADE COMPANY

Central Market

Date-09-7-2016
contract
Valve and Accessories For Chilled water system for Down Town Project
Ref-MORD-01 01.08.2016

Item DN mm Qty Specifications System UNIT PRICE TOTAL ( USD ) BRANDS Delivery.1 Delivery.2 Total.1 total.2

Automatic Air Vent Designed to vent automatically with float principle; bronze body and nonferrous
internal parts; pressure according to served system, (0-95 deg C) operating
temperature; with (DN8) discharge connection and (DN15) inlet connection

15

Silent Check Valves Class 150, bronze body swing check with rubber seat; Class 250, castiron
body swing check; Class 250, cast-iron body wafer check; Class 125, cast-iron
body lift check; or Class 250, cast-iron body check.
150 8 375.00 3,000.00 TERMO 8 0 3,000.00

Silent Check Valves


200 9 525.00 4,725.00 TERMO 9 0 4,725.00

0 -
Double Regulating Valves pressure according to served system, (121 deg C) maximum operating temperature,
25 bronze body, plug valve with calibrated orifice. Provide with connections for - 0 -
portable differential pressure meter with integral check valves and seals.
Double Regulating Valves Valve shall have integral pointer and calibrated scale to register degree of valve
80 30 opening. 278.40 8,352.00 UNIVAL 30 0 8,352.00 -
Valves (DN50) and smaller shall have threaded connections and (DN65) valves shall
Double Regulating Valves have flanged connections.
150 7 667.20 4,670.40 UNIVAL 7 0 4,670.40 -
Double Regulating Valves
200 3 1,200.00 3,600.00 UNIVAL 3 0 3,600.00 -
0 - -
Flexible Connection 15 cm length Stainless-steel bellows with woven, flexible, bronze, wire-reinforcing
25 16 protective jacket; pressure according to served system, (121 deg C) maximum 48.00 768.00 UNIVAL 16 0 768.00 -
operating temperature. Connectors shall have flanged and shall be capable of (20-
mm) misalignment.
Flexible Connection 15 cm length
80 70 75.00 5,250.00 UNIVAL 70 0 5,250.00 -

Flexible Connection 15 cm length


150 32 110.00 3,520.00 UNIVAL 32 0 3,520.00 -

Flexible Connection 15 cm length


200 24 175.00 4,200.00 UNIVAL 24 0 4,200.00 -
0 - -
Flow switch complete with all accessoriers 1. Flow-proving switches shall be either paddle or differential pressure type, as
suitable to connect Pipes 6" shown.
15 7
2. Paddle type switches (water service only) shall be UL listed, SPDT snap-acting
120.00 840.00 SYSTEM 7 0 840.00 -
with pilot duty rating and shall have adjustable sensitivity. SENSOR
3. Differential pressure type switches ( water service) shall be UL listed, SPDT snap-
acting.
Flow switch complete with all accessoriers
suitable to connect Pipes 8"
SYSTEM
15 2 150.00 300.00 2 0 300.00 -
SENSOR

0 - -
Bar Stock Valves

15 - 0 - -

0 - -
Gate Valves bronze body or Class 250 cast-iron body to suit piping system
15 GATE VALVE - 0 - -

bronze body or Class 250 cast-iron body to suit piping system


25 GATE VALVE - 0 - -

Class 150, bronze body; or Class 250, cast-iron body LUG


80 70 TYPE BUTTERFLY VALVE 65.00 4,550.00 UNIVAL 70 0 4,550.00 -

butterfly Valves Class 150, bronze body; or Class 250, cast-iron body LUG
150 30 TYPE BUTTERFLY VALVE 105.00 3,150.00 UNIVAL 30 0 3,150.00 -

Class 150, bronze body; or Class 250, cast-iron body LUG


200 21 TYPE BUTTERFLY VALVE 150.00 3,150.00 UNIVAL 21 0 3,150.00 -

Prepared By :Eng:mohamed Nasser Page 1-2 Heating and cooling system


Down Town Project BTK ENGINEERING & TRADE COMPANY
Central Market

Date-09-7-2016
contract
Valve and Accessories For Chilled water system for Down Town Project
Ref-MORD-01 01.08.2016

Item DN mm Qty Specifications System UNIT PRICE TOTAL ( USD ) BRANDS Delivery.1 Delivery.2 Total.1 total.2

0 - -
Immersion Thermostat with adjustable
switching differential, for control and
monitoring of CHW

15 9 65.00 585.00 HONEYWELL 9 - 585.00

0 - -
Motorize 2 ways Valve Modulating Class 150, cast-iron housing, stainless-steel operating parts; threaded connections
25 6 for (DN50) and smaller, flanged connections for (DN65) and larger. Factory set to 175.00 1,050.00 HONEYWELL 6 - 1,050.00
automatically control flow rates within plus or minus 5 percent design, while
compensating for system operating-pressure differential. Provide
80 32 quick disconnect valves for flow measuring equipment. Provide metal identification 1,000.00 32,000.00 HONEYWELL 32 - 32,000.00
tagwith chain for each valve, factory marked with the zone identification, valve
80 2 model number,and flow rate. 1,000.00 2,000.00 HONEYWELL 2 - 2,000.00
Motorize 2 ways Valve on / off
150 7 1,911.00 13,377.00 HONEYWELL 7 - 13,377.00

200 2 2,374.00 4,748.00 HONEYWELL 2 - 4,748.00


0 - -
Pressure gauge with accessories A. Description: ASME B40.1, Grade A phosphor-bronze Bourdon-tube pressure gage,
with bottom connection.
B. Case: Drawn steel, brass, or aluminum with (115-mm) -diameter glass lens.
C. Connector: Brass, (DN 8).
D. Scale: White-coated aluminum, with permanently etched markings.
E. Accuracy: Plus or minus 1 percent of range span.
F. Range: Conform to the following:
15 1. Vacuum: 100 kPa of vacuum to 103 kPa of pressure. - 0 - -
2. Fluids Under Pressure: 2 times operating pressure.

0 - -
pressure according to served system; cast-iron body (ASTM A 126,
20 6 Class B), flanged ends for (DN65) and larger, threaded connections for (DN50) and 7.00 42.00 UNIVAL 6 0 42.00 -
smaller, bolted cover, perforated Type 304 stainless-steel basket, and bottom drain
80 28 connection.. 75.00 2,100.00 UNIVAL 28 0 2,100.00 -
Strainer
150 8 190.00 1,520.00 UNIVAL 8 0 1,520.00 -

200 9 350.00 3,150.00 UNIVAL 9 0 3,150.00 -


0 - -

BALANCING SETTING MEASUREMENT


1 1,872.00 1,872.00 1 - 1,872.00
DEVICE

0 - -
Thermometer A.Chilled Water: (minus 18 to 38 deg C, with 1-degree scale divisions).
B. Accuracy: Plus or minus 1 percent of range span or plus or minus one scale
division to maximum of 1.5 percent of range span

15 90 25.00 2,250.00 PAKKENS 90 - 2,250.00

Notes :
1- All valves and accessories mentioned above shall be PN-10 , suitable to work with chilled and heating water system(0-90).
2- All contorl valves ( two way , three ways , differintial pressure valve), flow switch and immersion thermostat shall be suitable to work with BMS. 56,887.40 57,882.00

1 after 35 days of your order,delivered in Erbil. TOTAL OFFER 114,769.40 USD


30,000.00 USD 0.4956669635 0.5043330365
26,550.00 USD 50% 50%
DELIVERY.1 28,443.70 USD
DELIVERY.2 29,775.70 USD

Prepared By :Eng:mohamed Nasser Page 2-2 Heating and cooling system

You might also like