Professional Documents
Culture Documents
ELITE permanent
downhole gauge
Obtain reliable, fault-tolerant
data in HP/HT environments
bhge.com
• The triple gauge option can offer the need for filler material. Only two and the mechanical package is completely
redundancy or be ported to record three fittings—the pressure port and the tubing integrated into the gauge assembly, which
independent pressure measurements. The encapsulated conductor (TEC)—are required eliminates the requirement for external
shorter carrier for a side-by-side triple- to interface the gauge with the carrier. The Y-block components.
gauge assembly also retains a slim hole gauge pressure interface connection to Contact your BHGE representative today
running outside diameter. the carrier can be externally tested in the or visit bhge.com/SureSENS to learn more
The SureSENS QPT ELITE gauge is highly direction in which it will experience pressure, about how our new SureSENS QPT ELITE
robust, ensuring mechanical integrity eliminating the need for an internal pressure downhole gauge can obtain reliable, fault
by deep-penetration and high-vacuum, test tool. The TEC’s primary seal is a dual tolerant pressure, and temperature sensing.
electron-beam fusion welds, without metal-to-metal pressure-testable interface,
Transducer options 10,000 psi (689.5 bar) 16,000 psi (1103.2 bar) 20,000 psi (1379.0 bar) 25,000 psi (1723.6 bar) 30,000 psi (2068.4 bar) 35,000 psi (2413.7 bar)
15 psi to 11,000 psi 15 psi to 21,000 psi 15 psi to 25,000 psi 15 psi to 30,000 psi 15 psi to 35,000 psi 15 psi to 37,500 psi
Pressure range
(1 bar to 758.4 bar) (1 bar to 1447.8 bar) (1 bar to 1723.0 bar) (1 bar to 2068.4 bar) (1 bar to 2413.1 bar) (1 bar to 2586.1 bar)
Shock 500 G
Pressure measurement 200 psi to 10,000 psi 200 psi to 16,000 psi 200 psi to 20,000 psi 200 psi to 25,000 psi 200 psi to 30,000 psi 200 psi to 35,000 psi
range (calibrated) (13.8 bar to 689.5 bar) (13.8bar to 1103.2 bar) (13.8 bar to 1379.0 bar) (13.8 bar to 1723.6 bar) (13.8 bar to 2068.4 bar) (13.8 bar to 2413.7 bar)
+-0.015% 1.5 psi +-0.02% 3.2 psi +-0.02% 4.0 psi +-0.02% 5.0 psi +-0.025% 7.0 psi + -0.025% 8.75 psi
Pressure accuracy
at full scale at full scale at full scale at full scale at full scale at full scale
0.02% full scale, +-0.02% full scale, +-0.02% full scale, +-0.02% full scale, +-0.02% full scale, + -0.060% full scale,
Pressure stability
2.0 psi/year 3.2 psi/year 4.0 psi/year 5.0 psi/year 7.0 psi/year 21 psi/year
Temperature
77°F to 302°F
measurement range 77°F to 437°F (25°C to 225°C)
(25°C to 150°C)
(calibrated)
Temperature
0.0001°F
resolution
Maximum sample
>16
rate/second
Number of gauges
Multiple (greater than 24)
support/TEC
Cable distance
50,000 ft (15,240 m)
transmission
bhge.com
Copyright 2018 Baker Hughes, a GE company, LLC (“BHGE”). All rights reserved. The information contained in this document is company
confidential and proprietary property of BHGE and its affiliates. It is to be used only for the benefit of BHGE and may not be distributed,
transmitted, reproduced, altered, or used for any purpose without the express written consent of BHGE.
Baker Hughes reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any
time without notice or obligation. Contact your BHGE representative for the most current information. The Baker Hughes logo and SureSENS
are trademarks of Baker Hughes, a GE company, LLC. GE and the GE Monogram are trademarks of the General Electric Company.
67357