Professional Documents
Culture Documents
com
Filtration stage: Water entering the filter enters through the Helix
device, generating a centrifical effect that pushes particles in the
water away from the stacked discs. Water passes through the
grooves on the surface of the discs, leaving fine particles in and
between the grooves.
Backflushing is controlled by
integrated drainage valve and
a controller.
Self-cleaning filtering element - Maximum water
savings and efficiency in backwashing.
Large filtering area and wide range of filtration
grades - Discs from 5 to 400 microns allow for a
variety of applications.
Low maintenance - No tools required for
maintenance.
The modular configuration allows design options based on
Modularity Versatility, compatibility - Allows for a
customer preferences or available space.
wide range of configurations using a minimal
Automatic operation is available in 110 VAC, 220 VAC or 12 VDC.
number of components.
Special options available for extreme pressures (low, high) and
High quality manufacturing - High-density
water conditions (sea or saline water, potable, acidic). Possibility
polyethylene manifolds for maximum resistance
to perform backwashing with compressed air, minimizing water
and durability.
loss during backwashing.
Easy transport and installation - Preassembled
equipment; small foot print.
Mayan Watertech P.O.Box 343, Kfar Tavor, 1524100, Israel T +972.4.6772166 F +972.4.6772682 E office@mayan-wt.com
www.mayan-wt.com
Filtration - Maximum flow per filter Optimal flow depends on water quality
Helix Automatic filtering surface 1620 cm2 and filtration grade.
300 Series 200 Series Standard filtration system working pressure 1.5-10 bar.
Filtration
Quality
Grades 200-400 130 100, 130 50 20
of Water
micron
Good 32 30 26 17 9 Available Filtration Grades (micron)
Average 30 28 24 14 7
(m /h)
3
Poor 28 26 22 10 5 Discs 5 10 20 50 100 130 200 400
Very Poor 26 24 20 7 3
207
303
NOTE: The flow rate given by the filter conditions determines the frequency
of the backwashing. 304
0.15 305
Materials 306
N. Filtering
Model Manifold surface F E D L W R T S H
filters [cm2]
202/3fX 2" x 2 3"= 90 mm 3240 272 204 575 698 700 491 257 272 1080
203/4fX 2" x 3 4"= 100 mm 4860 272 204 830 945 700 511 267 281 1100 H
H
204/6fX 2" x 4 6"= 150 mm 6480 272 204 1065 1220 700 561 292 307 1150
TT
205/6fX 2" x 5 6"= 150 mm 8100 272 204 1420 1542 700 561 292 307 1150 R
R S
S
206/6fX 2" x 6 6"= 150 mm 9720 272 204 1695 1817 700 561 292 307 1150
302/4fX 3" x 2 4"= 100 mm 3240 311 230 644 714 785 573 267 309 1162
LL
303/4fX 3" x 3 4"= 100 mm 4860 311 230 830 956 785 573 267 309 1162
304/6fX 3" x 4 6"= 150 mm 6480 311 230 1065 1220 785 623 292 334 1212
E
E
305/6fX 3" x 5 6"= 150 mm 8100 311 230 1420 1553 785 623 292 334 1212
W
w
FF
306/6fX 3" x 6 6"= 150 mm 9720 311 230 1695 1828 785 623 292 334 1212
306/8fX 3" x 6 8"= 200 mm 9720 311 230 1695 1848 785 633 320 355 1257
D
* Model dimensions are approximate, for accurate dimension please request custom drawings.