Professional Documents
Culture Documents
SUGGESTED SPECIFICATIONS: projection screen(s), at least 75⁄8” in diameter. The motorized fabric and roller assembly to be
(H) x (W),electrically operated 120 volt (60Hz), not more than 3.4 installed in the case at the factory. Screen to be designed for left hand motor
amp. Shall have specially designed motor mounted inside the roller, to be two installation. Screen fabric to be flame retardant and mildew resistant. Bottom of
wire with ground, quick reversal type, oiled for life, with automatic thermal fabric shall be fitted with a metal slat covering. Heavy duty plastic caps shall
overload cutout, integral gears, capacitor and an electric brake to prevent protect the ends of the metal slat. Case housing to be made of structural steel
coasting. To have preset but adjustable limit switches to automatically stop tubing with aluminum metal coverings on top, aluminum profiles on rear and
picture surface in the “up” and “down” positions. Junction box shall be internally front and two extruded aluminum side coverings. The bottom of the casing is
integrated into the housing making it possible to install the housing and wire standard open. To be complete with a three-position radio remote control.
to the building’s electrical system during construction. Rigid metal roller, to be
153⁄8"
1313⁄16" Wall Bracket
43⁄8"
Case Length
133⁄4" 137⁄16"
Wall Bracket
117⁄16"
43⁄8" 1313⁄16"
157⁄8"
1615⁄16"
Ceiling Bracket
1113⁄16"
1313⁄16"
DL–0239 12.13
© 2013 Milestone AV Technologies LLC. Printed in U.S.A.