Professional Documents
Culture Documents
Leaders in each
province .....
UNISTRIKE
Solution
Our extensive range of panels and under structure systems have been designed to ensure that
there is a solution for your particular requirement. UniStrike’s high strength stringers
deliver unprecedented strength because of their unique solid tube design. Unistrike
Solution The US-Panel system, is constructed of a welded structural
steel assembly designed to accommodate ultimate and dynamic
loads. Its specially formulated cementitious fill and powder
coated epoxy finish gives the US panel a quiet and
very solid feel underfoot. Panel systems are
available in 600mm x 600mm.
We make a strong
and steady .....
Understructure
System
Bolt on Stringer system (with Bare panel or HPL finish)
The Bolt on Stringer System, Suitable for use where the height of the pedestal over the> 200 mm -
1000 mm of which weighed over material that has a high load. by using bold on stringer better
withstand heavy loads. Suitable for use in the Control Rooms, Server Rooms, Rooms that have a
There are 6 basic test that should be con- Concentrated Load: A load is applied over a
ducted on all raised floor system to ensure 25mm x 25mm steel indentor with the deflection
maximum performance and longevity: of the panel not exceeding 2.5 mm for the con-
Concentrated Load Test centrated load specified
Anticorrosive
Hard Wearing
Finished with a decorative anti-static high pressure
laminate panel that is easy to clean. It is also very hard
wearing with an attractive finish. Offers occuracy with
regards to height, is interchangeable, with simple in-
stallation and disassembly and is easy to maintain
Steel Cementious Access Floor System performance HPL/Bare Panel
Ultimate loads Uniform Loads Rolling Loads
Size Concentrated ( Kg F ) ( Kg F / m2 )
Type 10.000 passes
(mm) Load ( Kg F )
( Kg F)
US- 800 600x600x35 367 1109 1386 234
US-1000 600x600x35 458 1386 1702 316
US-1250 600x600x35 560 1733 1947 367
US-1500 600x600x35 673 2081 2192 458
®
UNISTRIKE HPL Calsium Suphate Access Floor
UNISTRIKE Accessories
Round Difusser
Avaible in strength grade from 4.5 kn to 10.9 kN with disigns to suit cementitous or calsium sul-
phate panel. A huge range of factory applied anti static surface finishes are also avaiable,
Feature
Provide superior cooling for managin heat loads in mis-
sion critical facilities. Avaiable with top surface adjustable
dampers. The steel perforated panels are same size and
finish as the solid panel, so the are avaiable with high
pressure laminates, vinyl and rubber floor covering inter-
changable with calsium sulphate panel
Our Client
DEPDIKNAS
®
UNISTRIKE Raised Floor / Access Floor
Email: name@company.com