Professional Documents
Culture Documents
42
The BPG range comprises 16 sizes of enclosure
manufactured in glass reinforced polyester
(GRP). This material is highly resistant to
Glass Reinforced Polyester Enclosures
ABTECH mould the BPG range from SMC material The BPG range is also available carbon loaded
rather than DMC which is the most common form (BPGC) which helps to reduce the surface
of GRP. In this method the glass reinforcement resistance of the material and consequently
takes the form of sheets rather than short strands. reduce the risk of spark from static build up.
This gives much greater mechanical strength and
also in the event of the enclosure being exposed Earthing can be accomplished by various
to fire conditions the structure holds together means. Internal / external earth stud which in
even if the resin is depleted due to the elevated turn can be connected to the terminal mounting
temperatures. This is demonstrated by the fact rail or component mounting plate, an earth
that the BPG range when fitted with ceramic continuity plate (ECP) can be fitted around the
terminals meets the requirements of IEC 331 inner walls to provide continuity for cable glands
(750°C (1382°F) for 3 hours) and also BS6387/1983 and various rail mounted earth terminals or
(950°C (1742°F) for 3 hours - flame only). Further proprietary earth bars can be fitted inside the
information about this testing procedure can be enclosure.
found in Section 6 of this catalogue.
43
When fitted with a standard neoprene gasket,
the enclosure is suitable for ambient BPG Range Features
temperatures of - 40°C to + 80°C (-40°F to
The BPG and BPGC enclosures are suitable for x Impact Resistant > 7Nm
use in hazardous areas and can be supplied with
a number of certificates, specifically ATEX EEx'e' x UV Resistant
to BS EN 50019 (zone 1 & 2) EEx'nA' to BS EN50021
(zone 2) and NEMA 4X (CSA, UL & FM class 1, div x Can be drilled and tapped to
2). accommodate most thread forms
(NPT for example)
44
Accessories and Options
The following table is a list of the available accessories suitable for particular standard sizes of BPG
Glass Reinforced Polyester Enclosures
enclosures. Care should be taken when ordering accessories for use with enclosures intended for
hazardous areas to ensure that compliance with certification is retained.
SG - Silicone Gasket
C - Carbon Loaded
EH - External Hinges
MR - DIN Standard
RF - RFI Protection
MP - Component
EX - Ex Certified
Mounting Plate
ES - Earth Stud
Mounting Rail
Part Number
Height (mm)
Depth (mm)
(see note 1)
(see note 2)
(see note 3)
(see note 4)
Width (mm)
Screws
Plate
Feet
BPG1 80 75 55
Ɣ Ɣ
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG2 110 75 55
Ɣ Ɣ
Ɣ Ɣ Ɣ Ɣ Ɣ
Ɣ Ɣ Ɣ
BPG3 160 75 55
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
Ɣ Ɣ Ɣ
BPG4 190 75 55
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
Ɣ Ɣ Ɣ
BPG4.5 190 75 75
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
Ɣ Ɣ Ɣ
BPG5 230 75 55
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
Ɣ Ɣ Ɣ
BPG6 122 120 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG7 220 120 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG8 160 160 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG9 260 160 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG10 360 160 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG11 560 160 90
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG12 255 250 120
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG13 400 250 120
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG13.5 400 250 160
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG14 600 250 120
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
BPG15 400 405 120
Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ
Ordering Example;
BPG8 EX EC EB MR
(BPG8 EX Certified with Earth Continuity Plate, Internal Earthing Bar and DIN standard Mounting Rail)
1. Carbon loading gives a surface tracking value of between 10Mƺ and 10Gƺ. Surface colour is black.
2. EEx'e' certification may be component or apparatus certified - please specify your requirements.
3. Silicone gasket increases temperature rating (-70º to +130º C) (-94°F to +266°F).
4. Radio Frequency Interference (RF) gasket may reduce IP rating. Enclosure may also be internally coated with RFI material.
45
Glass Reinforced Polyester Enclosures
Copper earth continuity plate Earth Stud Allen Head fixing screws
(must also be fitted with earth stud) (either brass or stainless steel) (grade 316)
External mounting feet Internal Earthing bar DIN standard mounting rail
(stainless steel 316) (can be fitted with clamps) (TS15, TS32 or TS35)
46
BPG1 / BPGc1 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
8.390W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG1 GRP 80 75 55 230
BPGC1 Carbon Loaded GRP 80 75 55 230
47
BPG1 / BPGc1
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
48
BPG2 / BPGc2 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
8.551W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG2 GRP 110 75 55 230
BPGC2 Carbon Loaded GRP 110 75 55 230
49
BPG2 / BPGc2
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
50
BPG3 / BPGc3 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
8.833W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG3 GRP 160 75 55 405
BPGC3 Carbon Loaded GRP 160 75 55 405
51
BPG3 / BPGc3
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
52
BPG4 / BPGc4 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
9.012W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG4 GRP 190 75 55 450
BPGC4 Carbon Loaded GRP 190 75 55 450
53
BPG4 / BPGc4
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
54
BPG4.5/BPGc4.5 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
9.260W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG4.5 GRP 190 75 75 529
BPGC4.5 Carbon Loaded GRP 190 75 75 529
55
BPG4.5/BPGc4.5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
56
BPG5 / BPGc5 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
9.260W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 0
Entrelec
MA2.5/5 0
Wago
280-992 0
Side A - C Side B - D
Width 90 23
BK6 (6 way) 4 M4/6 0 280-999 0 Height 30 28
SAK 6N 0 285-691 0
Gland Entry Matrix *
SAK 10 0 280-998 0
SAK 16 0 281-998 0
262-132(2) 6 M32 0 0
264-134(4) 4 M40 0 0
* Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG5 GRP 230 75 55 529
BPGC5 Carbon Loaded GRP 230 75 55 529
57
BPG5/BPGc5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
58
BPG6 / BPGc6 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
9.378W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 2
Entrelec
MA2.5/5 17
Wago
280-992 15 Width
Side A - C
75
Side B - D
54
BK6 (6 way) 2 M4/6 14 280-999 15 Height 60 53
SAK 6N 10 285-691 0
Gland Entry Matrix *
SAK 10 8 280-998 15
SAK 16 7 281-998 13
262-132(2) 3 M32 1 0
264-134(4) 2 M40 0 0
* Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG6 GRP 122 120 90 750
BPGC6 Carbon Loaded GRP 122 120 90 750
59
BPG6 / BPGc6
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
60
BPG7 / BPGc7 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
10.500W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 5
Entrelec
MA2.5/5 36
Wago
280-992 34
Side A - C Side B - D
Width 180 56
BK6 (6 way) 3 M4/6 30 280-999 34 Height 60 53
SAK 6N 22 285-691 0
SAK 10 18 280-998 34 Gland Entry Matrix *
SAK 16 15 281-998 29
262-132(2) 6 M32 3 0
264-134(4) 4 M40 0 0
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG7 GRP 220 120 90 1060
BPGC7 Carbon Loaded GRP 220 120 90 1060
61
BPG7 / BPGc7
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
62
BPG8 / BPGc8 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
10.348W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 3
Entrelec
MA2.5/5 24
Wago
280-992 22
Side A - C Side B - D
Width 108 78
BK6 (6 way) 2 M4/6 20 280-999 22 Height 65 58
SAK 6N 15 285-691 0
Gland Entry Matrix *
SAK 10 12 280-998 22
SAK 16 10 281-998 19
262-132(2) 4 M32 1 1
264-134(4) 2 M40 0 0
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG8 GRP 160 160 90 1060
BPGC8 Carbon Loaded GRP 160 160 90 1060
63
BPG8 / BPGc8
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
64
BPG9 / BPGc9 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
11.933W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 6
Entrelec
MA2.5/5 43
Wago
280-992 40
Side A - C Side B - D
Width 210 80
BK6 (6 way) 4 M4/6 36 280-999 40 Height 65 60
SAK 6N 27 285-691 0
Gland Entry Matrix *
SAK 10 22 280-998 40
SAK 16 18 281-998 34
262-132(2) 7 M32 3 1
264-134(4) 5 M40 0 0
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG9 GRP 260 160 90 1170
BPGC9 Carbon Loaded GRP 260 160 90 1170
65
BPG9 / BPGc9
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
66
BPG10 / BPGc10 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
13.793W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 9
Entrelec
MA2.5/5 63
Wago
280-992 58
Side A - C Side B - D
Width 312 82
BK6 (6 way) 6 M4/6 52 280-999 58 Height 65 60
SAK 6N 40 285-691 0
SAK 10 32 280-998 58 Gland Entry Matrix *
SAK 16 26 281-998 50
262-132(2) 10 M32 5 1
264-134(4) 7 M40 0 0
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG10 GRP 360 160 90 2150
BPGC10 Carbon Loaded GRP 360 160 90 2150
67
BPG10 / BPGc10
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
68
BPG11 / BPGc11 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
18.338W
Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 14
Entrelec
MA2.5/5 101
Wago
280-992 96 Width
Side A - C
242
Side B - D
80
BK6 (6 way) 10 M4/6 85 280-999 96 Height 65 (x2) 60
SAK 6N 64 285-691 0
Gland Entry Matrix *
SAK 10 51 280-998 96
SAK 16 43 281-998 82
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG11 GRP 560 160 90 3200
BPGC11 Carbon Loaded GRP 560 160 90 3200
69
BPG11 / BPGc11
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
70
BPG12 / BPGc12 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
15.474W
Terminal Populations (Maximum Number of Rails = 2) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 12
Entrelec
MA2.5/5 84
Wago
280-992 78 Width
Side A - C
205
Side B - D
170
BK6 (6 way) 8 M4/6 70 280-999 78 Height 90 85
SAK 6N 54 285-691 12
Gland Entry Matrix *
SAK 10 42 280-998 78
SAK 16 36 281-998 66
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG12 GRP 255 250 120 3200
BPGC12 Carbon Loaded GRP 255 250 120 3200
71
BPG12 / BPGc12
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
72
BPG13 / BPGc13 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
20.867W
Terminal Populations (Maximum Number of Rails = 2) Drilling Envelope Dimensions (mm)
Weidmuller
BK4 (4 way) 20
Entrelec
MA2.5/5 140
Wago
280-992 132
Side A - C Side B - D
Width 350 170
BK6 (6 way) 14 M4/6 118 280-999 132 Height 89 84
SAK 6N 88 285-691 20
Gland Entry Matrix *
SAK 10 72 280-998 132
SAK 16 60 281-998 114
262-132(2) 24 M32 6 2
264-134(4) 16 M40 5 2
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG13 GRP 400 250 120 3650
BPGC13 Carbon Loaded GRP 400 250 120 3650
73
BPG13 / BPGc13
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
74
BPG13.5 / BPGc13.5 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
20.867W
Terminal Populations (Maximum Number of Rails = 2) Drilling Envelope Dimensions (mm)
Weidmuller Entrelec Wago Side A - C Side B - D
BK4 (4 way) 20 MA2.5/5 140 280-992 132 Width 350 170
BK6 (6 way) 14 M4/6 118 280-999 132 Height 89 84
SAK 6N 88 285-691 20
Gland Entry Matrix *
SAK 10 72 280-998 132
SAK 16 60 281-998 114
264-220 70 M16 30 12
264-132(2) 24 M20 16 8
264-134(4) 16 M25 14 4
262-132(2) 24 M32 6 2
264-134(4) 16 M40 5 2
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG13.5 GRP 400 250 160 4872
BPGC13.5 Carbon Loaded GRP 400 250 160 4872
75
BPG13.5 / BPGc13.5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
76
BPG14 / BPGc14 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
30.384W
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG14 GRP 600 250 120 5235
BPGC14 Carbon Loaded GRP 600 250 120 5235
77
BPG14 / BPGc14
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
78
BPG15 / BPGc15 GlassReinforcedPolyesterEnclosures IP66/7
Application
Industrial and Hazardous areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX EEx e (Zone 1 & Zone 2) to BS EN 60079-7
ATEX EEx nA (Zone 2) to BS EN 60079-15
ATEX EEx nR (Zone 2) to BS EN60079-15
GOST-R and GOST-K Ex e (Zone 1 & Zone 2)
NEMA 4X (CSA, UL & FM) Class 1 Division 2
IEC Ex
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Neoprene gasket: -40o to 80o C (-40o to 176o F)
Silicone gasket: -70o to 130o C (-94o to 266o F)
Power Rating
31.350W
* Check that this enclosure can accommodate the cable bending radius * Using standard gland clearances
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG15 GRP 400 405 120 5580
BPGC15 Carbon Loaded GRP 400 405 120 5580
79
BPG15 / BPGc15
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
80