Dar 2021 in Excel

READ ME
Analysis of Rates for Delhi 2021 is published by Central

Public works Department in PDF format and is available
for free download from
https://www.cpwd.gov.in/Documents/cpwd_publication.aspx
and sale in two volumes from Jain Book Agency
(Central), New Delhi. As it was felt that if the data is
made available in Excel format, it would be easier to
use them. Therefore all data in PDF has been converted
to Excel format (XLSX) and edited wherever required. It
is possible when such huge data is converted and edited
that some errors could have crept in in spite of best
effort. In view of that, it is advised to use the official
publication of CPWD for all official work and not to
relay on this work.
CELL A 1 : H 81375 Is locked for editing
ANALYSIS OF RATES FOR DELHI 2021

VOLUME I and II
2.1 Earth work in surface excavation not exceeding 30 cm in

depth but exceeding 1.5 m in width as well as 10 sqm on plan
including getting out and disposal of excavated earth up to 50
m and lift up to 1.5 m, as directed by Engineer-in- Charge:
2.1.1 All kinds of soil

Code Description Unit Quantity
Details of cost for 100 Sqm
LABOUR
0114 Beldar day 6.8000
0115 Coolie day 5.6000
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 sqm
Cost of 1 sqm
Say
2.2 Earth work in rough excavation, banking excavated earth in
layers not exceeding 20cm in depth, breaking clods, watering,
rolling each layer with ½ tonne roller or wooden or steel
rammers, and rolling every 3rd and top-most layer with power
roller of minimum 8 tonnes and dressing up in embankments
for roads, flood banks, marginal banks and guide banks or
filling up ground depressions, lead up to 50 m and lift up to
1.5 m :

Details of cost for 10 cum.
LABOUR
0101 Bhisti day 0.4000
0113 Chowkidar day 0.0080
Roller charges (one roller does 1850 sqm. Of consolidation
per day)
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.0080
9999 Sundries L.S. 2.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.3 Banking excavated earth in layers not exceeding 20 cm in

depth, breaking clods, watering, rolling each layer with ½
tonne roller, or wooden or steel rammers, and rolling every
3rd and top-most layer with power roller of minimum 8
tonnes and dressing up, in embank - ments for roads, flood
banks, marginal banks, and guide banks etc., lead up to 50 m
and lift up to 1.5 m :

LABOUR
Roller charges (one roller does 1850 sqm. Of consolidation
per day)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.4 Deduct for not rolling with power roller of minimum 8 tonnes
for banking excavated earth in layers not exceeding 20 cm in
depth.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.5 Deduct for not watering the excavated earth for banking

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead up to 50 m
and lift up to 1.5 m, as directed by Engineer-in-charge.

Average output of Hydraulic Excavator per hour = 30cum.
MACHINERY
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.0410
0018 Hire and running charges of loader. day 0.0410
LABOUR
0128 Mate day 0.3200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

excavator)/manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead up to 50 m
and lift up to 1.5 m, as directed by Engineer-in-charge.
2.7.1 Ordinary rock

MACHINERY
0017 Hire and running charges of tipper day 0.0630
0132 Rock Excavator day 0.7050
0133 Rock Breaker day 1.5900
0134 Rock Hole Driller day 0.3550
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.7.2 Hard rock (requiring blasting)

MACHINERY
LABOUR
0325 Blasting powder kilogram 3.9300
0326 Blasting fuse (fuse wire) each 4.0000
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.7.3 Hard rock (blasting prohibited)
MACHINERY
0135 Stone Chiseller day 1.0600
0103 Blacksmith 2nd class day 0.1750
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

excavator) / manual means in foundation trenches or drains
(not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift up to 1.5 m,
including getting out the excavated soil and disposal of
surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil.

MACHINERY
LABOUR
0128 Mate day 0.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.9 Excavation work by mechanical means (Hydraulic excavator)/

manual means in foundation trenches or drains (not
exceeding 1.5m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift up to 1.5 m,
including getting out the excavated soil and disposal of
surplus excavated soils as directed, within a lead of 50 m.
2.9.1 Ordinary rock

MACHINERY
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

MACHINERY
LABOUR
0325 Blasting powder kilogram 6.4200
0326 Blasting fuse (fuse wire) each 7.0000
9999 Sundries L.S. 18.8500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

MACHINERY
LABOUR
0135 Stone Chiseller day 1.0600
9999 Sundries L.S. 17.9400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.1 Excavating trenches of required width for pipes, cables, etc
including excavation for sockets, and dressing of sides,
ramming of bottoms, depth up to 1.5 m, including getting out
the excavated soil, and then returning the soil as required, in
layers not exceeding 20 cm in depth, including consolidating
each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed, within a lead
of 50 m :

2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
Details of cost for 180m length of a pipe of an average dia.
say 40mm. Slope assumed 1 in 200.

Earth work and filling-
Minimum depth of trench 60cm. Average depth =
(0.6+1.5)/2 = 1.05, Width for this depth 0.45 cm,
180x0.45x1.05 = 85.05 cum
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 85.0500
2.25 Rate as per Item Number 2.25 of
SH: Earth Work cum 85.0500
TOTAL
Cost of 180m length of pipes
Cost for 1m. length of pipe
Say
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300
mm dia

Earth work and filling- Minimum depth of trench =
0.75+0.20 = 0.95m, Average depth = (1.50+0.95)/2 =
1.225m, Width = 0.40 + 0.20 = 0.60 m, 110x0.60x1.225 =
80.85 cum, 5% for collars = 4.04 cum, Total = 84.89 cum
TOTAL
Cost of 110m length of pipe
Cost for 1m length of pipe
Say
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding
600 mm

Earth work and filling- Minimum depth of trench 0.75+0.45=
1.20m, Average depth = (1.50+1.20)/2 = 1.35, Width = 0.40
+ 0.45 = 0.85 m, 60x0.85x1.35 = 68.85 cum, 5% for collars

= 3.44 cum, Total = 72.29 cum
TOTAL
Cost of 60m length of pipe
Say
2.11 Extra for excavating trenches for pipes, cables etc. in all kinds
of soil for depth exceeding 1.5 m, but not exceeding 3 m.
(Rate is over corresponding basic item for depth up to 1.5
metre).

Details of cost for 300m length of pipe of an average dia.
say 200mm (rate in percentage), Slope assumed 1 in 200.
100x0.60x1.75 = 105.00 cum, 200x0.60x2.00 = 240.00

cum. Total = 345.00 cum. Collars 5%= 17.25 cum. Total =
362.25 cum.
2.25 Rate as per Item Number 2.25 of SH: Earth Work cum 362.2500
1/2x200x1.60x1 = 160 cum
2.6.1 Rate as per Item Number 2.6.1 of SH: Earth Work cum 160.0000
2.25 Rate as per Item Number 2.25 of SH: Earth Work cum 160.0000
Extra for additional lift
1/2x200x0.60x1.50 = 135.00 cum
Collars 5%=6.75 cum.
Total= 141.75 cum
Cost for 300 m. length of pipe
2.10.1.2 Rate as per Item Number 2.10.1.2 of SH:Earth Work metre -300.0000
(Cost for 300 m. length of pipe up to
1.5 m depth)
Extra cost for 300 metre = R = P + Q
Extra cost for one metre = R/300
Percentage increase over item no
2.10.1.2 =(Rx100)/Q Say
2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds
of soil for depth exceeding 3 m in depth, but not exceeding
4.5 m. (Rate is over corresponding basic item for depth up to
1.5 metre.)

Details of cost for a 100m length of a pipe of an average dia.
Say 200 mm
Slope assumed 1 in 200.
Earth work and filling-
1x100x0.60x2 = 120 cum
Collars 5% = 6 cum.
Total = 126 cum.
2.25 Rate as per item No.2.25 of SH: Earth work Earth work cum 126.0000
100x1.60x1.25 = 200 cum
2.25 Rate as per item No.2.25 of SH: Earth work cum 200.0000
1x100x0.60x1.50 = 90 cum.
2x0.50x100x0.60x0.50 = 30 cum.
Total = 120 cum.
Collars 5% = 6 cum.
Total = 126 cum
2.10.1.2 Rate as per Item Number 2.10.1.2 of SH: Earth work metre -100.0000
(Cost for 100 m. length of pipe up to
1.5 m depth)
Extra cost for 100 metre =R = P + Q
Extra cost for one metre =R/100
Percentage increase over item no
2.10.1.2 =(Rx100)/Q
Say
2.13 Excavating trenches of required width for pipes, cables, etc,

including excavation for sockets, depth up to 1.5 m, including
getting out the excavated materials, returning the soil as
required in layers not exceeding 20 cm in depth, including
consolidating each deposited layers by ramming, watering
etc., stacking serviceable material for measurements and
disposal of unserviceable material as directed, within a lead of
50 m :
2.13.1 Ordinary rock :

2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia
Details of cost for 180 m length of a pipe of
a average dia. say 40mm.
Slope assumed 1:200
Excavation-
Quantity same as in item No.2.10.1.1
Refilling, ramming and watering
2.25 Rate as per item No.2.25 of SH: Earth Work cum 85.0500
Extra labour for ramming of rock
TOTAL
Add 1 % Water charges on "W-A"
TOTAL
Add GST on "X-A" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y-A"
TOTAL
Add Cess @ 1% on "Z-A"
Say
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300
mm dia
Details of cost for 80 m length of pipe of an
average dia. Say 200mm.
Slope assumed 1:200
Excavation-
Minimum depth of trench.
0.75+0.15+0.20 = 1.10m
Average depth = (1.10+1.50)/2 = 1.30m
Minimum width of trench = 0.90m
80x0.90x1.30 = 93.60 cum.
2.9.1 Rate as per item no. 2.9.1 of SH: Earth Work cum 93.6000
TOTAL
TOTAL
TOTAL
TOTAL
Say
2.13.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600
mm dia
Details of cost for 30 m. length of a pipe of
an average dia. say 450mm.
Excavation-
Minimum depth of trench.
0.75+0.15+0.45 = 1.35m
Average depth = (1.35+1.50)/2 = 1.425m
Minimum width of trench = 0.90m
30x0.90x1.425 = 38.475 cum.
5% for collar = 1.924cum
Total = 40.399cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 m length of a pipe
Cost for one m length of a pipe
Say

Details of cost for 180 m length of a pipe of a average dia.
say 40mm.
Slope assumed 1:200
Excavation-
TOTAL
TOTAL
TOTAL
TOTAL
Say
mm dia
Details of cost for 80 m length of a pipe of an average dia.
say 200mm.
Slope assumed 1:200
Excavation-
TOTAL
TOTAL
TOTAL
TOTAL
Say
600 mm dia
Say 450mm.
Slope assumed 1:200
Excavation-
TOTAL
TOTAL
TOTAL
TOTAL
Say

Details of cost for 180 m length of a pipe of a average dia.
say 40mm.
Slope assumed 1:200
Excavation-
2.9.3 Rate of item no 2.9.3 of SH: Earth Work cum 85.0500
TOTAL
TOTAL
TOTAL
TOTAL
Say
mm dia
2.9.3 Details of cost for 80 m length of a pipe of an average dia. cum 93.6000
say 200mm.
Slope assumed 1:200
Excavation-
TOTAL
TOTAL
TOTAL
TOTAL
Say
600 mm dia
Say 450mm.
Slope assumed 1:200
Excavation-
TOTAL
TOTAL
TOTAL
TOTAL
Say
2.14 Extra for excavating trenches for pipes, cables, etc. in

ordinary/hard rock exceeding 1.5 m in depth but not
exceeding 3 m. (Rate is over corresponding basic item for
depth up to 1.5 metre)

say 200mm.
Excavation-
100x0.90x1.50 = 157.50 cum.
200x0.90x20.00 = 360 cum.
Total = 517.50 cum.
0.50x200x1.90x1 = 190 cum.
517.50+190.00 = 707.50 cum.
0.5x300x0.9x1.5 = 202.50 cum.
0114 Beldar day 16.5000
TOTAL
TOTAL
TOTAL
TOTAL
Rate as per Item No.2.13.2.2 of SH: Earth Work metre -300.0000
(cost of 300 m length of pipe up to 1.5m depth)
Extra cost for 300 metre = P + Q
Extra cost for one metre
Percentage increase over item 2.13.2.2 = (Rx100)/Q
Say
2.15 Extra for excavating trenches for pipes, cables, etc. in

ordinary/hard rock exceeding 3m in depth but not exceeding
4.5 m. (Rate is over corresponding basic item for depth up to
1.5 metre)

Details of cost for 100m length of a pipe of
an average dia. say 200mm. (rate in percentage) Slope
assumed 1 in 200.
Max depth assumed 3.5m
Excavation-
100x0.90x2 = 180 cum.
100x1.90x1.25 = 237.5 cum
1x100x0.90x1.50 = 135
2x0.50x100x0.90x0.50 = 45
Total = 180 cum.
180+237.50 = 417.50 cum.
TOTAL
TOTAL
TOTAL
TOTAL
2.13.2.2 Rate as per item No 2.13.2.2 of metre -100.0000
SH: Earth Work
(cost of 100 m length of pipe exceeding
1.5 m and up to 3 m depth)
Extra cost for 100 m = P + Q
Extra cost for 1 m
Percentage increase over item 2.13.2.2 = (Rx100)Q
Say
2.16 Close timbering in trenches including strutting, shoring and

packing cavities (wherever required) complete.
(Measurements to be taken of the face area timbered).
2.16.1 Depth not exceeding 1.5 m

Details of cost for a trench 30m long and 1.5m deep area
2x30x1.50=90 sqm
MATERIAL
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost

Poling boards of
1198 Second class kail wood in planks 10 cudm 21.3750
90x0.038 = 3.42 cum = 3420 cudm
Qty taken for cost of using once
after deducting for credit = 3420x¼x¼ = 213.75 dm³
Wallings l00mmx 100mm of
1197 Second class kail wood in scantling 10 cudm 7.5000
4x30x0.10x0.10 = 1.20cum= 1200 cudm
Qty taken for cost of using once after deducting for credit =
1200x¼x¼ = 75 dm³
0302 Safeda ballies 125 mm diameter metre 3.1875
and 1.5m long
2x17x1.50 = 51m
after deducting for credit = 51x¼x¼ = 3.1875 m
CARRIAGE
Poling boards = 3.42 cum
Walling = 1.20 cum.
Balli struts: 3.14/4x(0.125)³x51 = 0.63 cum
Total of carriage = 5.25x¼ = 1.3125 cum.
2204 Carriage of Timber cum 1.3125
0112 Carpenter 2nd class day 0.5000
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.16.2 Depth exceeding 1.5 m but not exceeding 3 m

Details of cost for a trench 30m long and 1.5m deep
Area 2x30x1.50=90 sqm
MATERIAL

Poling boards of
90x0.038 = 3.42 cum = 3420 cudm
after deducting for credit = 3420x¼x¼ = 213.75 dm³
Walings 100 mmx 100mm of
4x30x0.10x0.10 = 1.20cum = 1200 cudm
1200x¼x¼ = 75 dm³
and 1.5m long
2x17x1.50 = 51m
after deducting for credit = 51x¼x¼ = 3.1875 m
CARRIAGE
Walling= 1.20 cum.
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.16.3 Depth exceeding 3 m but not exceeding 4.5 m

Details of cost for a trench 30m long and 1.5m deep
Area 2x30x1.5=90 sqm-
MATERIAL

Poling boards of
90x0.038 = 3.42 cum = 3420 cudm
after deducting for credit = 3420x¼x¼ = 213.75dm³
Wallings 100mmx 100mm of
4x30x0.10x0.10 = I.20cum = 1200 dm3
after deducting for credit = 1200x¼x¼ = 75 dm³
and 1.5m long
2x17x1.5 = 51m
Qty taken for cost of using once after
deducting for credit = 51x¼x¼ = 3.1875 m
CARRIAGE
Walling = 1.20 cum.
LABOUR
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.17 Close timbering in case of shafts, wells, cesspits, manholes

and the like including strutting, shoring and packing cavities
(wherever required) etc. complete. (Measurements to be
taken of the face area timbered).

Details of cost for a manhole 1.2m x 1.0m x1.5m-
Surface area: 2x(1.2+1.0)x1.5 = 6.6sqm
MATERIAL

Poling boards of
6.6x0.038 = 0.251 cum = 251 cudm
deducting for credit = 251x¼x¼ = 15.6875 dm³
Walling of
2x2x1.124x0.1x0.1 = 0.045 cum
2x2x0.924x0.1x0.1 = 0.037 cum.
Total Kail wood = 0.082 cum. = 82dm³
0302 Safeda ballies 125 mm diameter and 1.5m long metre 0.4118
2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
deducting for credit = 6.592x¼x¼ = 0.4118m
CARRIAGE
Walling = 0.082 cum.
Balli struts 3.14/4x(0.125)²x6.59 = 0.081 cum.
Total of carriage = 0.414 cum x¼ = 0.1035 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say

MATERIAL

Poling boards of
6.6x0.038 = 0.251 cum = 251 cudm
Walling of
2x2x1.124x0.1x0.1 = 0.045 cum
2x2x0.924x0.1x0.1 = 0.037 cum.
2x2x0.924 = 3.696
2x2x0.724 = 2.896
deducting for credit = 6.592x¼x¼ = 0.4118m
CARRIAGE
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say

MATERIAL

Poling boards of
6.6x0.038 = 0.251 cum = 251 cudm
Walling of
2x2x1.124x0.10x0.10 = 0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.
2x2x0.924 = 3.696
2x2x0.724 = 2.896
deducting for credit = 6.592x¼x¼ = 0.4118 m
CARRIAGE
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
2.18 Close timbering over areas including strutting, shoring and

packing cavities (wherever required) etc. complete.
(Measurements to be taken of the face area timbered):

Details of cost for an area 30m long and 1.50m deep-
Area -30x1.5m = 45 sqm.
MATERIAL

Poling boards of
250x38mm : 45x0.038 = 1.71 cum = 1710 cudm
Wallings l00mmx 100mm of
100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm
Raking struts
CARRIAGE
Walling = 0.30 cum
Raking struts 3.14/4x(0.125)² = 0.313 cum
LABOUR
9999 Sundries L.S. 31.4600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say

Details of cost for an area 30m long and 1.5m deep- Area
-30x1.5m = 45 sqm.
MATERIAL

Poling boards of
250x38mm : 45x0.038 = 1.71 cum =1710 cudm
Walling of
100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm
Raking struts
17 x 1.5 = 25.5m
CARRIAGE
Walling = 0.30 cum.
LABOUR
9999 Sundries L.S. 34.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say

Details of cost for an area 30m long and 1.5m deep- Area
-30x1.5m = 45 sqm.
MATERIAL

Poling boards of
250x38mm : 45x0.038 = 1.71 cum =1710 cudm
Walling of
100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm
Raking struts
and 1.5m long
17 x 1.50 = 25.5m
CARRIAGE
Walling = 0.30 cum.
LABOUR
9999 Sundries L.S. 47.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say
2.19 Extra for planking, strutting and packing materials for cavities
(in close timbering) if required to be left permanently in
position. (Face area of timber permanently left to be
measured).

Details of cost for a trench 30m long and 1.5m deep area
2x30x1.5=90 sqm-
MATERIAL
Poling boards of
90x0.038 = 3.42 cum = 3420 cudm
Less @ 1/8 of Qty as timber is supposed to be used once
before = 3420 - 427.5 = 2992.5 dm ³
Walings 100mmx100mm of
4x30x0.10x0.10 = 1.20cum = 1200 cudm
before = 1200 - 150 = 1050 dm ³
Struts of
and 1.5m long
2x17x1.5 = 51m
before = 51 - 6.37 = 44.63 m

Walling= 1.20 cum.
Balli struts: 3.14/4x(0.125) ² x 51 = 0.63 cum
= 5.25 cum Taking half = 5.25 x ½ = 2.675 cum
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.20 Open timbering in trenches including strutting and shoring

complete (measurements to be taken of the face area
timbered):

Details of cost for a trench of length 30m and 1.50m deep
surface area - 2x30x1.5 = 90 sqm.

MATERIAL
Poling board of
1198 Second class kail wood in planks 1.5mx0.25x0.038m 10 cudm 7.1250
2x40x1.5x0.25x0.038= 1.14cum = 1140 cudm
1140x¼x¼ = 71.25 cudm
Walling l00mmxl00mm :
4x30mx0.l0mx0.l0m = 1.20cum= 1200 cudm
1200x¼x¼ = 75 dm³ Struts of
2x17x1.50 = 51m
51x¼x¼ = 3.18 m
CARRIAGE:
Walling = 1.20 cum
Ballies struts 3.14/4x(0.125) ² = 0.63 cum
Total of carriage = 2.97 cum x ¼ = 0.74
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say


MATERIAL
Poling board of
1198 Second class kail wood in planks 1.5mx0.25x0.038m 10 cudm 7.1250
2x40x1.5x0.25x0.038= 1.14cum = 1140 cudm
1140x¼x¼ = 71.25 cudm
Walling l00mmxl00mm :
4x30mx0.l0mx0.l0m = 1.20cum= 1200 cudm
1200x¼x¼ = 75 dm³ Struts of
2x17x1.50 = 51m
51x¼x¼ = 3.18 m
CARRIAGE:
Walling = 1.20 cum
0112 LABOUR day 0.5000
0112 day
Carpenter 2nd class
9999 Sundries L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say

1198 Details of cost for a trench of length 30m and 1.5m deep

MATERIAL

Poling boards of
Second class kail wood in planks 10 cudm 7.1250
1.50mx0.25x0.038m :
2x40x1.5x0.25x0.038= 1.14 cum =1140 cudm
Wallings of
l00mmxl00mm : 4x30mx0.lmx0.lm = 1.20cum= 1200 cudm

deducting for credit = 1200x¼x¼ = 75 dm³
Struts of
and 1.5m long
2x17x1.5 = 51m
51x¼x¼ = 3.18 m
CARRIAGE:
Walling = 1.20 cum
Carpenter 2nd class
9999 Sundries L.S. 46.6700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say
2.21 Open timbering in case of shafts, wells, cesspits, manholes

and the like including strutting and shoring complete
(Measurements to be taken of the face area timbered):

Details of cost for a manhole 1.2x 1m x 1.5m
Surface area 2(1.2+1.0)x1.5 = 6.6 sqm
MATERIAL

Polling boards of
250mm wide and 38mm thick :
6x0.25x1.50x0.038 = 0.086 cum = 86cudm
Walling 100mmxl00mm of
4x1.20x0.10x0.10 = 0.048 cum = 48 dm³
Struts of
(4x1.00=4.00)+(2x1.20=2.40) = 6.40m
CARRIAGE :
Walling = 0.048 cum
Ballies struts 3.14/4x(0.125) ² x 6.40 = 0.079 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say

MATERIAL

Polling boards of
6x0.25x1.50x0.038 = 0.086 cum = 86cudm
4x1.20x0.10x0.10 = 0.048 cum = 48 dm³
Struts of
(4x1.00=4.00)+(2x1.20=2.40) = 6.40m
CARRIAGE :
Walling = 0.048 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
2.21.3 Depth exceeding 3.0 m but not exceeding 4.5 m

MATERIAL

Polling boards of
6x0.25x1.50x0.038 = 0.086 cum = 86cudm
4x1.20x0.10x0.10 = 0.048 cum = 48 dm³
Struts of
(4x1.00=4.00)+(2x1.20=2.40) = 6.40m
CARRIAGE :
Walling = 0.048 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
2.22 Open timbering over areas including strutting, shoring etc.

complete. (Measurements to be taken of the face area
timbered):

Details of cost for an area 30m long and 1.5m deep
area = 30 x 1.50 = 45 sqm.
MATERIAL

Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³
Raking struts-
40x1.50 = 60m
CARRIAGE :
Ballies 40x1.5x3.14/4x0.125² = 0.4 cum.
Total for carriage = 1.31 cum x ¼ = 0.3275 cum
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say

area = 30 x 1.50 = 45 sqm.
MATERIAL

Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³
Raking struts-
40x1.50 = 60m
CARRIAGE :
Ballies 40x1.5x3.14/4x0.125² = 0.4 cum.
LABOUR
9999 Sundries L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say
area = 30 x 1.50 = 45 sqm.
MATERIAL

Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³
Raking struts-
40x1.50 = 60m
CARRIAGE :
Ballies 40x1.5x3.14/4x0.125² = 0.4 cum.
LABOUR
9999 Sundries L.S. 47.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say
2.23 Extra for planking and strutting in open timbering if required

to be left permanently in position. (Face area of the timber
permanently left to be measured).


MATERIAL
Poling boards of
1.50mx0.25x0.038
2x40x1.50x0.25x0.038 = 1.14cum = 1140 cudm
before = 1140 - 142.5 = 997.5 dm ³

Walling 100mmx 100mm of
4x30mx0.10 mx0.10 m = 1.20cum= 1200 cudm
before = 1200 - 150 = 1050 dm ³

Struts of
and 1.5m long
2x17x1.5= 51m
Less @ 1/8 of Qty as timber is supposed to
be used once before = 51 - 6.37 = 44.63 m
Walling = 1.20 cum
Ballies struts 51x3.14x¼x0.125² = 0.63 cum
Total of carriage = 2.97 cum Taking half = 2.97 x ½ = 1.485
cum
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 90 sqm.
Cost per sqm.
Say
2.24 Extra rates for quantities of works, executed:

2.24.1 In or under water and/or liquid mud, including pumping out
water as required
Extra due to slow progress and dewatering: 20% of the rate of metre depth
the item
(20% of the rate of the item.

The extra percentage in rate is applicable in respect of each
item but limited to quantities of work executed in difficult
condition.)
Cost of 1 metre depth

Say
2.24.2 In or under foul position, including pumping out water as

required
Extra due to slow progress and dewatering: 25% of the rate of metre depth
the item
(25% of the rate of the item

This pertains to only such. Pumping of water
as is envisaged at the time of tendering and
don't include those that covered under
contractual risk)
Cost of 1 metre depth

Say
Note for item no. 2.24:- The extra percentage rate is

applicable in respect of each item but limited to quantities of
work executed in these difficult conditions. The unit, namely,
metre depth, to be considered for payment, shall be the
depth measured from the sub soil water level up to the centre
of gravity of the qty executed in difficult conditions. The depth
shall be reckoned correct to 0.10 m, 0.05 m or more shall be
taken as 0.10 m and less than 0.05 m ignored.
2.25 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm
in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift up to 1.5 m.

Details of cost for 10 cum. LABOUR
0128 Mate day 0.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.25(a) Excavating, supplying and filling of local earth (including

royalty) by mechanical transport up to a lead of 5km also
including ramming and watering of the earth in layers not
exceeding 20 cm in trenches, plinth, sides of foundation etc.
complete.
Code No Description Unit Quantity

Details of cost for 10 cum
2.6.1 Rate as per item no 2.6.1 of SH:2 EARTH WORK cum 10.0000
Less for initial lead of 50m
1.2.2 Rate as per item no 1.2.2 of SH:1 CARRIAGE OF
MATERIALS cum -10.0000
Add for ramming and watering in layers (Ref. item no 2.27)
0114 Beldar (1/2x0.89=0.45 day) day 0.4500

Carriage of materials up to 5 km
1.1.2 Rate as per item no 1.1.2 of SH:1 CARRIAGE OF cum 10.0000
MATERIALS
0979 Royalty for good earth cum 10.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cum
Cost of 1 cum
Say
2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation / banking excavated or stacked materials.
LABOUR
0128 Mate day 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.26.2 Ordinary or hard rock

LABOUR
0128 Mate day 0.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.27 Supplying and filling in plinth with sand under floors, including
watering, ramming, consolidating and dressing complete.

MATERIAL
6501 Sand zone V (Jamuna) cum 10.0000
2335 Carriage of Jamuna sand cum 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.28 Surface dressing of the ground including removing vegetation

and in-equalities not exceeding 15 cm deep and disposal of
rubbish, lead up to 50 m and lift up to 1.5 m.

Details of cost for 100 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.29 Ploughing the existing ground to a depth of 15 cm to 25 cm

and watering the same.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.30 Excavating holes more than 0.10 cum & up to 0.5 cum
including getting out the excavated soil, then returning the
soil as required in layers not exceeding 20cm in depth,
including consolidating each deposited layer by ramming,
watering etc, disposing of surplus excavated soil, as directed
within a lead of 50 m and lift up to 1.5 m.

Details of cost for 10 holes-
Earth work 10 x 0.30 (avg) = 3.0 cum
Extra labour for filling and ramming
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say
2.30.2 Ordinary rock

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say
2.31 Clearing jungle including uprooting of rank vegetation, grass,

brush wood, trees and saplings of girth up to 30 cm measured
at a height of 1 m above ground level and removal of rubbish
up to a distance of 50 m outside the periphery of the area
cleared.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.32 Clearing grass and removal of the rubbish up to a distance of

50 m outside the periphery of the area cleared.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
2.33 Felling trees of the girth (measured at a height of 1 m above

ground level), including cutting of trunks and branches,
removing the roots and stacking of serviceable material and
disposal of unserviceable material.
2.33.1 Beyond 30 cm girth up to and including 60 cm girth

Details of cost for one tree of 15cm dia and average height
3m
LABOUR
quantity of wood- 3.14/4x0.15x0.15x3 = 0.053 cum.
Add 20% for branches = 0.011 cum.
Total = 0.064 cum.
Labour for cutting in trees removing the roots from the soil
and then filling in Pit and depressions.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one tree
Say

Details of cost for a tree of average girth 90cm, average
dia. 0.3m and length 5m
LABOUR
quantity of wood- (22x0.30x0.30x5)/7x4 = 0.35 cum + 20%
branches = 0.07 cum. Total = 0.42 cum

Labour for cutting trees, removing roots from the soil and
filling in pit & depressions:

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one tree
Say

dia. 0.6m and length 7m

LABOUR
quantity of wood- (22x06x0.60x7)/7x4 = 1.98 cum.+ 20%
branches = 0.40 cum. Total = 2.38 cum.

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one tree
Say
2.33.4 Above 240 cm girth

dia. 1m and length 10m

LABOUR
quantity of wood- (22 x 1 x 1 x 10)/7x4 = 7.86 cum + 20%
Branches = 1.57 cum. Total = 9.43 cum.

0114 Beldar day 14.0000
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one tree
Say
2.34 Supplying chemical emulsion in sealed containers including

delivery as specified.
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Details of cost of 100 litres
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 100.0000
2342 Carriage of solvent/ Diesel. quintal 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 litres
Cost for 1 litre
Say
2.35 Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) :
2.35.1 Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical surface of
the substructure to a depth of 300mm including excavation
channel along the wall & rodding etc. complete:
2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Details of cost for 10 metres
MATERIAL
Chlorpyriphos 1% concentration = 10.0x 0.30x7.5 = 22.5 litres
Chlorpyriphos 20% required = 22.5/20 = 1.125 litres

Chlorpyriphos 20% E.C. / Lindane 20% E.C. 1.125 litres (to
be supplied free of cost)

LABOUR
(for excavating channel) rodding in chemical spraying the
emulsion and refilling the same

9999 Sundries, rent of sprayer etc. L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.35.2 Along the external wall below concrete or masonry apron
using chemical emulsion @ 2.25 litres per linear metre
including drilling and plugging holes etc.:
2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

MATERIAL
Chlorpyriphos 1% concentration = 10x 2.25 = 22.5 litres
Chlorpyriphos 20% required = 22.50/20 = 1.125 litres

LABOUR
(for drilling holes and injecting chemical)
9999 Sundries and rent of a sprayer and mortar and making good L.S. 35.8800
the holes
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.35.3 Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Details of cost for 9 sqm. (3 metre x 3 metre)
No. of holes - 100 nos.
MATERIAL
Chlorpyriphos 1% required 100x1 litre = 100 litres
Chlorpyriphos 20% E.C. = 100/20 = 5.0 litres
Chlorpyriphos 20% E.C. / Lindane 20% E.C. 5 litres (to be
supplied free of cost)

LABOUR
(For making holes & spraying)
0124 Mason (brick layer) 2nd class day 0.5000
9999 Sundries, rent of sprayer and mortar L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 9 square metre
Cost per square metre
Say
2.35.4 Treatment of existing masonry using chemical emulsion @

one litre per hole at 300 mm interval including drilling holes at
45 degree and plugging them with cement mortar 1:2 (1
cement : 2 coarse sand) to the full depth of the hole :
2.35.4.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

MATERIAL
No. of holes 10.0/0.30 = 33.33+1 = 34.33 holes. Say 34
holes
chlorpyriphos 1% concentration required = 34x1.0 = 34.00
litres
Chlorpyriphos 20% E.C. required 34.00/20 = 1.70 litres
LABOUR
9999 Sundries, rent of pump etc. L.S. 17.9400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.35.5 Treatment at points of contact of wood work by chemical
emulsion Chlorpyriphos/ Lindane (in oil or kerosene based
solution) @ 0.5 litres per hole by drilling 6 mm dia holes at
downward angle of 45 degree at 150 mm centre to centre and
sealing the same.

MATERIAL
No. of holes 10.0/0.15 = 66.67+1 = 67.67 holes. Say 68
holes
Chlordane 1% concentration required = 68 x 0.5 = 34.00
litres
Chlordane 20% E.C. required 34.00/20=1.70 litres
Chlordane 20% E.C./ Lindane 20% E.C. 1.7 litres (to be
supplied free of cost)
Kerosene oil = 34-1.7 = 32.30 litres
0771 Kerosene oil litre 32.3000
LABOUR
(For making holes and plugging the same)
for injecting chemical
9999 Sundries L.S. 17.9400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.36 Extra for levelling & neatly dressing of disposed soil

completely as directed by Engineer-in-charge.
LABOUR
0128 Mate day 0.0800
0115 Beldar/ Coolie day 0.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.37 Supply and stacking of Fly ash conforming to IRC- 58 at site,

including carriage, loading , unloading & stacking up to any
lead (measured stacks will be reduced by 20% for payment).

Ref :- Based on DAR Item No : 1.1.1
Labour and carriage
1980 Fly ash cum 1.0000
(Available free of cost at thermal power plant at Baderpur
power plant. Lead = 35 km)

2262 Carriage of Fly ash cum 1.0000
(1st Lead 0 to 5km)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
2.38 Filling with available fly ash and earth (excluding rock) in
trenches or embankment in layers (each layer should not
exceed 15 cm), with intermediate layer of compacted earth
(Soil density of 98%) after every four layers of compacted
depth of fly ash, sides & top layer of filling shall be done with
earth having total minimum compacted thickness 30 cm or as
decided by Engineer -in-charge, including compacting each
layer by rolling/ ramming and watering, all complete as per
drawing and direction of Engineer -in - charge.

Ref :- Based on DAR Item No : 2.25
LABOUR
0128 Mate day 0.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
3.1 Cement mortar 1:1 (1 cement : 1 fine sand)

MATERIAL
(0.7175 cum. of cement = 1.02 tonne) Cement
required for cement mortar is 71.25%
0367 Portland Cement tonne 1.0200
2209 Carriage of Cement tonne 1.0200
0983 Fine Sand (Zone IV) cum 0.7125
2261 Carriage of Fine sand (1 part Badarpur sand : 2 parts
jamuna sand) cum 0.7125
LABOUR
For measuring, carrying, depositing and mixing-
9999 Hire and running charges of mechanical mixer L.S. 26.9000
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.2 Cement mortar 1:2 (1 cement : 2 fine sand).

MATERIAL
(0.475 cum. of cement = 0.68 tonne) Cement required
for cement mortar is 47.50%
0983 Fine sand (zone IV) cum 0.9500
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.7 Cement mortar 1:2 (1 cement : 2 coarse sand).

MATERIAL
0982 Coarse sand (zone III) cum 0.9500
2203 Carriage of Coarse sand cum 0.9500
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.12 Cement mortar 1:2 (1 cement : 2 stone dust).

MATERIAL
1159 Stone dust cum 0.9500
2267 Carriage of Stone dust cum 0.9500
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.13 Cement mortar 1:2 (1 cement : 2 marble dust).

MATERIAL
(0.475 cum of cement = 0.68 tonne) Cement required
0784 Marble dust/ powder cum 0.9500
2268 Carriage of Marble dust and marble chips cum 0.9500
LABOUR
For measuring, carrying, depositing and mixing
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.14 Cement mortar 1:5 (1 cement : 5 marble dust).

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.15 White cement mortar 1:2 (1 white cement : 2 marble dust).

MATERIAL
(0.475 cum. of white cement = 0.68 tonne) Cement
0368 White Cement tonne 0.6800
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say

MATERIAL
LABOUR
9999 Sundries L.S. 13.5200
Cost of 1.00 cum
Say
3.18 Mud mortar

Detail of cost for one cum
MATERIAL
0811 Mud (dry) cum 1.0800
LABOUR
Cost of one cum
Say
3.19 Mortar in lime, surkhi (50% red and 50% light yellow) and
marble dust 1:1.5:0.5
MATERIAL
(0.475 cum of lime putty) = 3.01 q of unslaked lime
1182 Surkhi cum 0.7125
0773 Unslaked lime quintal 3.0100
2268 Marble dust and/or marble chips cum 0.2400
2208 Carriage of Lime cum 3.0100
LABOUR
For slaking lime, making lime putty, grinding and
carrying
9999 As cost for running and upkeep of mortar mill L.S. 10.3500
Cost of 1.00 cum
Say
4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work
up to plinth level :
4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources)

MATERIAL
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.5700
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.8500
0367 Portland Cement (0.2833 cum) tonne 0.4000
LABOUR
0155 Mason (average) day 0.1000
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with hooper day 0.0700
0012 Vibrator(Needle type 40mm) day 0.0700

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.2A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete
Aggregate (RCA) up to 25% : 3 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA) up to 25%).

Details of cost for 1 cum. MATERIAL
0295 Stone Aggregate (Single size) : 20 mm nominal size derived cum 0.4280
from natural sources
0279 Recycled Concrete Aggregate (RCA) 20 mm nominal size cum 0.1420
0297 Stone Aggregate (Single size) : 10 mm nominal size derived
from natural sources cum 0.2100
Recycled Concrete Aggregate (RCA) 10 mm nominal size
0281 Carriage of Stone aggregate including Recycled Concrete cum 0.0700
2202 Aggregate (RCA) below 40 mm nominal size
Coarse sand (zone III) derived from natural sources cum 0.8500
Manufactured sand derived from Recycled Concrete
0982 Aggregate (RCA) cum 0.3190
0278 Carriage of Coarse sand including manufactured sand Portland
Cement (0.2833 cum)
Carriage of Cement LABOUR
Mason (average) Beldar
Aggregate (RCA) below 40 mm nominal size
Coarse sand (zone III) derived from natural sources
Manufactured sand derived from Recycled Concrete
Aggregate (RCA)
Carriage of Coarse sand including manufactured sand Portland
Cement (0.2833 cum)
cum 0.1060
Carriage of Cement LABOUR
2203 Mason (average) Beldar cum 0.4250
0367 tonne 0.4000
2209 tonne 0.4000
0155 day 0.1000
0114 day 1.6300

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone aggregate 20 mm nominal size
derived from natural sources)

MATERIAL
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.3A 1:2:4 (1 cement : 2 coarse sand (zone-III) including

nominal size Recycled Concrete Aggregate (RCA) up to 25%)

MATERIAL

0982 Coarse sand (zone III) derived from natural sources cum 0.3340
0278 Manufactured sand derived from Recycled Concrete cum 0.1110
Aggregate (RCA)
LABOUR
Vibrator(Needle type 40mm)
9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.4 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural

MATERIAL
0293 Stone Aggregate (Single size) : 40 mm nominal size, cum 0.5200
0.56 - (7.5% for voids i.e.) 0.04 = 0.52 cum
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 0.5200

LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say


MATERIAL
0367 Portland Cement(0.15674 cum) tonne 0.2200
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.5A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled

Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Concrete Aggregate (RCA) )

MATERIAL
2202 Carriage of Recycled Concrete Aggregate (RCA) below 40 mm cum 0.9400

nominal size
Aggregate (RCA)
2203 Carriage of manufactured sand cum 0.4700
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled

concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size Recycled Aggregate (RA) )

MATERIAL
0283 Recycled Aggregate (RA) 20 mm nominal size cum 0.7000
2202 Carriage of Recycled Aggregate below 40 mm nominal size cum 0.9400

Aggregate )RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say

MATERIAL
0293 Stone Aggregate (Single size) : 40 mm nominal size (0.70 cum - cum 0.6500
7.5% for voids i.e. 0.05 =0.65 cum)

LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.6A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled

nominal size Recycled Aggregate (RA) )

MATERIAL
2206 Carriage of Recycled Aggregate 40 mm nominal size and cum 0.6500
above

Aggregate (RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say


0293 Details of cost for 1 cum. cum 0.6500
MATERIAL
Stone Aggregate (Single size) : 40 mm nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65 cum)

LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.8A 1:4:8 (1 cement : 4 manufactured sand derived from Recycled

nominal size Recycled Aggregate (RA)

MATERIAL
above

Aggregate (RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from

MATERIAL

LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.10A 1:5:10 (1 cement : 5 manufactured sand derived from

Recycled Concrete Aggregate (RCA) : 10 graded stone
aggregate 40 mm nominal size Recycled Aggregate (RA) )

MATERIAL
above

Aggregate (RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.11 1:5:10 (1 cement : 5 fine sand derived from natural sources :

10 graded stone aggregate 40 mm nominal size derived from
natural sources)

MATERIAL

2261 Carriage of Fine sand (1 part Badarpur sand : 2 parts jamuna cum 0.4700
sand)
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.12 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ coarse

sand (zone-III) derived from natural sources : 9 graded stone
aggregate 40 mm nominal size derived from natural sources)

MATERIAL
(0.70 cum-7.5% for voids i.e. 0.05 = 0.65 cum)
2206 Carriage of Stone aggregate 40 mm nominal cum 0.6500
1980 Fly ash cum 0.2100
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum.
Say
4.1.12A 1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½
Aggregate (RCA) : 9 graded stone aggregate 40 mm nominal
size Recycled Aggregate (RA) )

MATERIAL
above

Aggregate (RCA)
1980 Fly ash cum 0.2100
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.1.13 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 coarse

sand(zone-III) derived from natural sources : 11 graded stone
aggregate 40 mm nominal size derived from natural sources)

MATERIAL
(0.70 cum-7.5% for voids i.e. 0.05 = 0.65 cum)

1980 Fly ash cum 0.2100
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum.
Say
4.1.13A 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4

Aggregate (RCA) :11 graded stone aggregate 40 mm nominal
size Recycled Aggregate (RA) )

MATERIAL
above

Aggregate (RCA)
1980 Fly ash cum 0.2100
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2 Providing and laying cement concrete in retaining walls,

return walls, walls (any thickness) including attached pilasters,
columns, piers, abutments, pillars, posts, struts, buttresses,
string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets, sunken floor etc., up to floor
five level, excluding the cost of centering, shuttering and
finishing:
4.2.2 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from

size derived from natural sources).

MATERIAL
LABOUR
0123 Mason (brick layer) 1st class day 0.0600

9999 Scaffolding L.S. 114.4000
9999 Sundries L.S. 14.3000
(Extra labour for lifting material up to floor V level = 0.75 x 2.5
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.2A 1:1½:3 (1 cement : 1½ coarse sand (zone-III) including

nominal size Recycled Concrete Aggregate (RCA) up to 25%) ).

MATERIAL
0295 Stone Aggregate (Single size) 20 mm nominal size derived cum 0.4280
0281 Recycled Concrete Aggregate (RCA): 10 mm nominal size cum 0.0700

Aggregate (RCA)
2203 Carriage of Coarse sand including manufactured sand cum 0.4250
LABOUR
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with hooper
day 0.0700
9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say


MATERIAL
LABOUR

9999 Sundries L.S. 14.3000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.3A 1:2:4 (1 Cement : 2 coarse sand (zone-III) including

nominal size Recycled Concrete Aggregate (RCA) up to 25%)).

MATERIAL

Aggregate (RCA)
LABOUR
0012 day 0.0700

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say


MATERIAL
LABOUR

9999 Scaffolding (17.60x2.5 avg.) L.S. 114.4000
9999 Sundries L.S. 13.5200
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.5A 1:3:6 (1 cement : 3 manufactured sand derived from Recycled
nominal size Recycled Concrete Aggregate (RCA))

MATERIAL

nominal size
Aggregate (RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.5B 1:3:6 (1 cement : 3 manufactured sand derived from Recycled

nominal size Recycled Aggregate (RA))

MATERIAL

Aggregate (RCA)
LABOUR

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.8 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from


MATERIAL

LABOUR

9999 Sundries L.S. 14.3000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.2.8A 1:5:10 (1 cement : 5 manufactured sand derived from

Recycled Concrete Aggregate (RCA) : 10 graded stone
aggregate 40 mm nominal size Recycled Aggregate (RA))

MATERIAL
above

Aggregate (RCA)
LABOUR
9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
4.3 Centering and shuttering including strutting, propping etc. and

removal of form work for :
4.3.1 Foundations, footings, bases for columns
Details of cost for footing size 2.7mx2.7mx1.00m
Contact area = 10.8 sqm.
MATERIAL
Assuming shuttering material will become unserviceable after
use of 40 times, Adding for maintenance @ 10% of cost,
Taking salvage value after full use of material @ 25% of cost
of material
7319 Wall form panel 1250x500 mm each 0.3400

Qty taken for cost of using once =16x0.85/40 = 0.34
7326 Corner angle 45x45x5 mm 1.50 m long each 0.0850
7327 100 mm channel shoulder 2.5 m long each 0.1700
Qty taken for cost of using once =8x0.85/40= 0.17
7328 Double clip ( bridge clip) each 0.3400
7329 Single clip each 0.1700
7330 M.S. tube 40 mm dia metre 0.2295
Qty taken for cost of using once =10.8x0.85/40 = 0.2295
9999 Assembly nuts & bolts L.S. 22.1000
9977 Carriage L.S. 78.0000
LABOUR
0116 Fitter (grade 1) day 0.7500
9999 Shuttering oil L.S. 52.0000
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
4.3.2 Retaining walls, return walls, walls (any thickness) including

attached pilasters, buttresses, plinth and string courses fillets,
kerbs and steps etc.

Details for 7.9m long and 1.00m high wall
Area of contact 2x7.9x1.0 = 15.8 sqm.
MATERIAL
of material

9999 Nut & Bolts L.S. 27.6200
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries L.S. 52.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
4.3.3 Columns, piers, abutments, pillars, posts and struts
Detail of cost for 4.5sqm
Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
MATERIAL
of material

Qty taken for cost of using once = 8x0.85/40 = 0.17
7333 Column clamp 450x1070 mm each 0.1063
7334 Prop 2 m ( 2-3.5m) each 0.0850
9999 Assembly nut & bolt L.S. 27.6200
9977 CARRIAGE L.S. 52.0000
LABOUR
9977 Carriage L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 4.5 sqm.
Cost per sqm.
Say
4.4 Providing and laying cement concrete in kerbs, steps and the
like at or near ground level excluding the cost of centering,
shuttering and finishing.
4.4.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from


Details of cost for kerb :
100m long 20cm deep and 30cm wide, 100m x 0.30m x 0.20m
= 6.00 cum.
Cement concrete 1:1½:3
4.1.2 Rate as per Item No.4.1.2 of SH:CONCRETE WORK cum 6.0000
Cost for 6 cum.
Cost per cum.
Say
4.4.1A 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) including

nominal size Recycled Concrete Aggregate (RCA) up to 25%)).

4.1.2A Details of cost for kerb :
100m long 20cm deep and 30cm wide, 100m x 0.30m x 0.20m
= 6.00 cum.
Cement concrete 1:1.5:3
4.1.2A Rate as per Item No.4.1.2A of SH:CONCRETE WORK cum 6.0000
Cost for 6 cum.
Cost per cum.
Say
4.5 Providing and fixing up to floor five level precast cement

concrete string or lacing courses, copings, bed plates, anchor
blocks, plain window sills, shelves, louvers, steps, stair cases,
etc., including hoisting and setting in position with cement
mortar 1:3 (1 Cement : 3 coarse sand), cost of required
Centering complete.
4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

natural sources : 3 graded stone aggregate 20mm nominal

Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIAL
4.1.2 Rate as per Item Number 4.1.2 of SH: Concrete work cum 0.4500
(Extra labour for lifting = 0.45 x 0.45 x 2.5 = 0.51)
10.1 Centering and shuttering kg 0.2100
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m² = 8.48
kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
6.70m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.
Assuming shuttering will become unserviceable after use of 40
times and taking 75% credit.
Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl
= 0.21 kg
Rate as per item no.10.1 S.H. steel work
(2) Moulding Platform
Assuming platform will become
unserviceable after use of 40 times.
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 = 0.1 sqm
11.1.2 Rate as per item no. 11.1.2 of S.H.: Flooring work sqm 0.1000
(ii) 25mm thick cement concrete 1:2:4 in pavement
2.00x2.00x0.025 = 0.10cum
Qty taken for cost of using once = 0.100/40 = 0.0025 cum
11.7 Rate as per item no. 11.7 of S.H.: Flooring work cum 0.0025
9999 Mortar and labour for hoisting and finishing L.S. 36.3000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.45 cum.
Cost per cum.
Say
4.5.1A 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including

Aggregate (RCA) up to 25% : 3 graded stone aggregate 20mm
nominal size Recycled Concrete Aggregate (RCA) up to 25%))

Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIAL
4.1.2A Rate as per Item Number 4.1.2A of SH: Concrete work cum 0.4500
(Extra labour for lifting = 0.45 x 0.45 x 2.5 = 0.51)
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m² = 8.48
kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
6.70m @ 0.4kg/m = 2.68 kg.
Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl
= 0.21 kg
10.1 Rate as per item no.10.1 S.H. steel work kg 0.2100
Assuming platform will become
unserviceable after use of 40 times.
1x2.0x2.0m = 4 sqm.
11.1.2 Rate as per item no. 11.1.2 of S.H.: Flooring work sqm 0.1000
2.00x2.00x0.025 = 0.10cum
Sub A/R-1 Rate as per item no. Sub AR-1 (Reference item no 11.7) cum 0.0025
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.45 cum.
Cost per cum.
Say
Sub AR-1
(Reference item no 11.7)
Cement concrete pavement with 1:1.5:3 (1 cement : 1.5
coarse sand including manufactured sand derived from
Recycled Concrete Aggregate (RCA) up to 25% : 3 graded
stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) up to 25%), including finishing complete.

Details of cost for one cum.
MATERIAL
4.1.2A Rate as per item No.4.1.2A of S.H.Concrete Work cum 1.0000
Extra labour for laying in floors etc.
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
4.6 Providing and fixing at or near ground level precast cement

concrete in kerbs, edgings etc. as per approved pattern and
setting in position with cement mortar 1:3 (1 Cement : 3
coarse sand), including the cost of required centering,
shuttering complete.

natural sources: 3 graded stone aggregate 20 mm nominal

Details of cost for 25 no kerbs, 40x30x20cm
25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m² = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = 6.79kg. or 0.068 qtl.
Qty taken for cost of using once = 0.068x0.75/40 = 0.001275
qtl = 0.1275 kg
10.1 Rate as per item no 10.1 SH: Steel work kg 0.1275
Assuming platform will become unserviceable after use of 40
times.
1x2.0x2.0m = 4 sqm.
11.1.2 Rate as per item no. 11.1.2 S.H: Flooring work. sqm 0.1000
2.00x2.00x0.025 = 0.100
11.7 Rate as per Item Number 11.7 of SH: Flooring cum 0.0025
9999 Mortar and labour for finishing L.S. 30.5400
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.6 cum.
Cost per cum.
Say

nominal size Recycled Concrete Aggregate (RCA) up to 25%))

Details of cost for 25 no kerbs, 40x30x20cm
25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m² = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = 6.79kg. or 0.068 qtl.
qtl = 0.1275 kg
10.1 Rate as per item no 10.1 SH: Steel work kg 0.1275
times.
1x2.0x2.0m = 4 sqm.
11.1.2 Rate as per item no. 11.1.2 S.H: Flooring work. sqm 0.1000
2.00x2.00x0.025 = 0.100
9999 Mortar and labour for finishing L.S. 30.5400
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.6 cum.
Cost per cum.
Say

concrete solid block, including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse sand), cost of
required centering, shuttering complete :


Details of cost for 25 no blocks, 40x20x30cm
25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m² = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = 6.79kg. or 0.068 qtl.
qtl = 0.1275 kg
10.1 Rate as per item no.10.1 S.H: steel work kg 0.1275
times.
1x2.0x2.0m = 4 sqm.
11.1.2 Rate as per item no. 11.1.2 S.H.: Flooring work. sqm 0.1000
2.00x2.00x0.025 = 0.100
11.7 Rate as per Item Number 11.7 of SH:Flooring cum 0.0025

Mortar 1:3 for Fixing
0.202/100x25=0.051
3.8 Rate as per Item No 3.8 cum 0.0510
Extra for Labour for lifting (27/100x25=0.675 or 0.68)
Labour for hoisting and setting in position
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.6 cum.
Cost per cum.
Say

nominal size (Recycled Concrete Aggregate (RCA) up to 25%)).

Details of cost for 25 no blocks, 40x20x30cm
25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m² = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = 6.79kg. or 0.068 qtl.
qtl = 0.1275 kg
10.1 Rate as per item no.10.1 S.H: steel work kg 0.1275
times.
1x2.0x2.0m = 4 sqm.
11.1.2 Rate as per item no. 11.1.2 S.H.: Flooring work. sqm 0.1000
2.00x2.00x0.025 = 0.100
Mortar 1:3 for Fixing
0.202/100x25=0.051
3.8 Rate as per Item No 3.8 cum 0.0510
Extra for Labour for lifting (27/100x25=0.675 or 0.68)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.6 cum.
Cost per cum.
Say

concrete hollow block, including hoisting and setting in
position with cement mortar 1:3 (1 cement : 3 coarse sand),
cost of required centering, shuttering complete.
4.8.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
size derived from natural sources) .

Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6 vertical hollows,
40x20x30cm finished contents = 1mx0.5mx0.1m = 0.05cum
MATERIAL
Net qty = 0.05[6x0.5x{2x1/2(0.05+7)}x0.074] = 0.023cum
9999 Centering and shuttering including T&P charges, hire charges L.S. 26.9100
of steel mould, table vibrator, rammer, bolts nuts & washers
etc.
Cement mortar 1:2 for fixing

3.7 Rate as per Item No.3.7 of SH:MORTARS cum 0.0020
LABOUR
Extra Labour for lifting material up to floor V level
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.05 cum.
Cost per cum.
Say

Aggregate Recycled Concrete Aggregate (RCA) up to 25% : 3
graded stone aggregate 20 mm nominal size (Recycled
Concrete Aggregate (RCA) up to 25%)).

Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6 vertical hollows,
40x20x30cm finished contents = 1mx0.5mx0.1m = 0.05cum
MATERIAL
Net qty = 0.05[6x0.5x{2x1/2(0.05+7)}x0.074] = 0.023cum
9999 Centering and shuttering including T&P charges, hire charges L.S. 26.9100
of steel mould, table vibrator, rammer, bolts nuts & washers
etc.
Cement mortar 1:2 for fixing

LABOUR
Extra Labour for lifting material up to floor V level
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.05 cum.
Cost per cum.
Say
4.9 Precasting and placing in position 125 mm dia Bollards 600

mm high of required shape including providing M.S. Pipe
Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes
40 mm dia and 450mm long with 150x150x6mm M.S. plate
welded at bottom and embedded 150mm in cement concrete
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
derived from natural sources), including necessary excavation
of size 250x250x450mm deep for the same in
bitumen/concrete pavement at specified spacing.

Details of Cost for one bollard
MATERIAL
Cement concrete 1:2:4
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum
5.1.3 Rate as per Item no. 5.1.3 SH : RCC cum 0.0070
3.14x(0.125)x0.60 = 0.24 sqm
5.9.1 Rate as per Item no. 5.9.1 SH : RCC sqm 0.2400
M.S. pipes ( medium class)
50 mm dia sleeve =1x0.30x5.10 =1.53 kg
40 mm dia pipe =1x0.45x3.61 =1.62 kg
M.S. plate 3mm thick =(0.15x0.15)x23.55 =0.53 kg
Total =3.68 kg
10.1 Rate as per Item no.10.1SH : Steel work kg 3.6800
Excavation
0.25x0.25x0.45 = 0.03 cum
2.8.1 Rate as per Item no. 2.8.1 SH : Earth work cum 0.0300
4.1.5 Rate as per Item no. 4.1.5 SH : Cement concrete cum 0.0300
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
5.23 Rate as per Item no. 5.23 SH : RCC sqm 0.2500
9988 Carriage and fixing charges L.S. 13.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one bollard
Say
4.9 A Precasting and placing in position 125 mm dia Bollards 600

1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate Recycled Concrete Aggregate (RCA) : 6
Concrete Aggregate (RCA)), including necessary excavation of
size 250x250x450mm deep for the same in bitumen/ concrete
pavement at specified spacing

MATERIAL
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum
5.1.3A Rate as per Item no. 5.1.3A SH : RCC cum 0.0070
3.14x(0.125)x0.60 = 0.24 sqm
40 mm dia pipe =1x0.45x3.61 =1.62 kg
Total =3.68 kg
Excavation
0.25x0.25x0.45 = 0.03 cum
4.1.5 A Rate as per Item no. 4.1.5 A SH : Cement concrete cum 0.0300
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Say
4.9 B Precasting and placing in position 125 mm dia Bollards 600

1:3:6 (1 Cement : 3 manufactured sand derived from Recycled
Concrete Aggregate Recycled Concrete Aggregate (RCA) : 6
Aggregate (RA), including necessary excavation of size
250x250x450mm deep for the same in bitumen/ concrete
pavement at specified spacing

MATERIAL
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum
5.1.3A Rate as per Item no. 5.1.3A SH : RCC cum 0.0070
3.14x(0.125)x0.60 = 0.24 sqm
40 mm dia pipe =1x0.45x3.61 =1.62 kg
Total =3.68 kg
Excavation
0.25x0.25x0.45 = 0.03 cum
4.1.5 B Rate as per Item no. 4.1.5 B SH : Cement concrete cum 0.0300
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Say
4.1 Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III)
derived from natural sources : 4 graded stone aggregate
12.5mm nominal size derived from natural sources)

Details of cost for 10 sqm
MATERIAL
Cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4
graded stone aggregate 12.5 mm nominal size)
10x0.040 = 0.40 cum
4.1.3 Rate as per item no 4.1.3 of SH: Concrete work cum 0.4000
Add deduct for difference of cost between 20mm size and
12.5mm size
0295 Stone Aggregate (Single size) : 20 mm nominal size cum -0.6700
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 0.6700
Add for delay
9999 Sundries (Form work etc.) L.S. 1.9500
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
4.10A Providing and laying damp-proof course 40mm thick with
including manufactured sand derived from Recycled Concrete
Aggregate (RCA) up to 25% : 4 graded stone aggregate
12.5mm nominal size (Recycled Concrete Aggregate (RCA) up
to 25%))

MATERIAL
Cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III)
Recycled concrete aggregate (RCA) up to 25% : 4 graded stone
aggregate 12.5mm nominal size (Recycled concrete aggregate
(RCA) up to 25%))
10x0.040 = 0.40 cum

4.1.3A Rate as per item no 4.1.3A of SH: Concrete work cum 0.4000
Add deduct for difference of cost between 20mm size and
12.5mm size
0295 Stone Aggregate (Single size) : 20 mm nominal size derived cum -0.5030
0279 Stone Aggregate (Single size) : 20 mm nominal size derived cum -0.1670
from Reinforced Cement Concrete (RCA)
0296 Stone Aggregate (Single size) : 12.5 mm nominal size derived cum 0.5030
0280 Stone Aggregate (Single size) : 12.5 mm nominal size derived cum 0.1670
from Reinforced Cement Concrete (RCA)
Add for delay
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
4.11 Providing and laying damp-proof course 50mm thick with

derived from natural sources : 4 graded stone aggregate
20mm nominal size derived from natural sources).

MATERIAL
Cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4
graded stone aggregate 20 mm nominal size) = 10x0.05 = 0.50
cum
4.1.3 Rate as per item no 4.1.3 of SH:Concrete work cum 0.5000

Add for delay :
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
4.11A Providing and laying damp-proof course 50mm thick with

Aggregate (RCA) up to 25% : 4 graded stone aggregate 20mm
nominal size (Recycled Concrete Aggregate (RCA) up to 25%))

MATERIAL
1:2:4 (1 cement : 2 coarse sand (zone-III) Recycled concrete
aggregate (RCA) up to 25% : 4 graded stone aggregate 20mm
nominal size (Recycled Concrete Aggregate (RCA) up to 25%))
= 10x0.05 = 0.50 cum
4.1.3A Rate as per item no 4.1.3A of SH:Concrete work cum 0.5000

Add for delay :
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
4.12 Extra for providing and mixing water proofing material in

cement concrete work in doses by weight of cement as per
manufacturer's specification.

Details of cost for per bag of 50kg. of cement
MATERIAL
Approved waterproofing 'materials according to the
recommended proportions
1213 Water proofing materials kilogram 1.0000
9988 Carriage of water proofing material and
labour for mixing etc. L.S. 3.6400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per bag of cement of 50kg.
Say
4.13 Providing & applying a coat of residual petroleum bitumen of

grade of VG-10 of approved quality using 1.7kg per square
metre on damp proof course after cleaning the surface with
brushes and finally with apiece of cloth lightly soaked in
kerosene oil.

Details of cost for 10sqm.
MATERIAL
0309 Paving bitumen VG-10 of approved quality tonne 0.0170
Fuel for heating
0370 Coal (steam) quintal 0.0350
2211 Carriage of Tar bitumen tonne 0.0170
LABOUR
Cleaning surface and applying kerosene oil
Heating the material
Spreading hot tar over damp proof course
0131 Painter day 0.2000
9988 Sundries (Carriage of kerosene, steam coal, brushes, T&P etc.) L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
4.14 Extra for concrete work in superstructure above floor V level

for each four floors or part thereof.
Details of cost per cum.
Extra labour element required for lifting of materials
(0.75x2.00 = 1.50)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
4.15 Extra for laying concrete in or under water and/or liquid mud
including cost of pumping or bailing out water and removing
slush etc. complete.

Details of cost for 14 cum per 0.3m depth
Quantity of concrete = 14 cum. pumping hours = 3 hrs. or
0.375 day.
0011 Hire charges of Pump set of capacity 4000 litres/hour. day 0.3750
for cleaning slush
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 14cum. per 0.30 m depth
Cost of cum. per m depth
Say
4.16 Extra for laying concrete in or under foul positions.

Extra labour due to slow progress-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
4.17 Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural
derived from natural sources) over 75mm thick bed of dry
brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including necessary
excavation, levelling & dressing & finishing the top smooth.

Detail of cost for 10 sqm
MATERIAL
0287 Brick Aggregate (Single size) : 40 mm nominal size cum 0.7500
2260 Carriage of Brick aggregate cum 0.7500
sand)
Dressing the ground including cutting and filling up to 15cm

MATERIAL
Qty. of cement concrete 1:3:6 on 10 sqm. area = 0.5cum.

Labour (for C.C 1:3:6)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.17A Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 manufactured sand derived from Recycled
nominal size (Recycled Concrete Aggregate (RCA) over 75mm
thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand,
including necessary excavation, levelling & dressing &
finishing the top smooth

0287 MATERIAL cum 0.7500
Brick Aggregate (Single size) : 40 mm nominal size
sand)

MATERIAL

nominal size
Aggregate (RCA)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.17B Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 manufactured sand derived from Recycled
nominal size (Recycled Aggregate (RA) over 75mm thick bed
of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including necessary
excavation, levelling & dressing & finishing the top smooth

MATERIAL
sand)

0283 MATERIAL cum 0.3500
Recycled Aggregate (RA) 20 mm nominal size


Aggregate (RCA)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.18 Extra for addition of synthetic Polyester triangular fibre of
length 12mm, effective diameter 10-40 microns and specific
gravity of 1.34 to 1.40 in cement
concrete/RCC/Flooring/water retaining structures by using
125gms of synthetic Polyester triangular fibre for 50 Kg
cement used as per directions of Engineer-in- Charge.

Detail of cost for per bag of 50 kg of cement used in concrete
MATERIAL
8732 Synthetic polyester triangular fibre of length 12mm, effective kg 0.1250
dia 10-40 microns and specific gravity of 1.34 to 1.40
TOTAL 0.125
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 50 kg of cement
Cost per 50 kg of cement
Say
4.20 Providing and laying in position ready mixed or site batched

design mix cement concrete for plain cement concrete work;
using coarse aggregate and fine aggregate derived from
natural sources, Portland Pozzolana/Ordinary Portland
/Portland Slag cement, admixtures in recommended
proportions as per IS: 9103 to accelerate / retard setting of
concrete, to improve durability and workability without
impairing strength; including pumping of concrete to site of
laying, curing, carriage for all leads; but excluding the cost of
centering, shuttering and finishing as per direction of the
engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified
cement content in design mix shall be payable separately. In
case the cement content in design mix is more than 110% of
the minimum specified cement content, the contractor shall
have discretion to either re-design the mix or bear the cost of
extra cement.
.
4.20.1 All works upto plinth level :

4.20.1.1 Concrete of M10 grade with minimum cement content of 220
kg /cum
Details of cost for 1.00 cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

0367 Ordinary/Pozzolana/Slag Cement tonne 0.2200
7318 Plasticizer / super plasticizer kilogram 1.1000
Production cost, pumping to respective floors and laying in
position
0004 Production cost of concrete by batch mix plant / ready mixed cum 1.0000
plant.
0009 Pumping charges of concrete including carriage for all leads cum 1.0000
and hire charges of pump, piping work & accessories etc.
Labour for pouring, consolidating & curing

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
4.20.2 All works above plinth and up to floor V level

kg /cum

MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
=
1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
4.20A Providing and laying in position ready mixed or site batched
design mix cement concrete for plain cement concrete
4.20A.1 All works up to plinth level

4.20A.1.1 Concrete of M10 grade with minimum cement content of 220
kg /cum.
MATERIAL

0278 Fine aggregate derived from recycled concrete aggregate
(RCA) cum 0.4700

2203 Carriage of fine aggregate derived from recycled concrete
aggregate (RCA) cum 0.4700

position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
MATERIAL
from
natural sources
0279 Recycled Concrete Aggregate (RCA) (25%) 20 mm nominal size cum 0.2220

0278 Fine aggregate derived from recycled concrete aggregate cum 0.1170
(RCA) (25%)
position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
0295 Details of cost for 1.00 cum cum 0.6680
MATERIAL
Stone Aggregate (Single size) : 20 mm nominal size derived
from
natural sources

(RCA) (25%)
position
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
MATERIAL

(RCA) (25%)
0004 Production cost, pumping to respective floors and laying in cum 1.0000
position
Production cost of concrete by batch mix plant / ready mixed
plant.

9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
4.20A.2 All works above plinth and up to floor V level

kg /cum.

MATERIAL

(RCA) (25%)
2203 Carriage of fine aggregate derived from recycled concrete cum 0.4700
aggregate (RCA)
position
plant.

9999 Sundries L.S. 13.0000
(Extra labour for lifting material up to
floor V level = 0.75 x 2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
MATERIAL

(RCA) (25%)
position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
MATERIAL
from
natural sources

(RCA) (25%)
position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum.
0295 Details of cost for 1.00 cum cum 0.6680
MATERIAL
Stone Aggregate (Single size) : 20 mm nominal size derived
from
natural sources

(RCA) (25%)
position
plant.

9999 Sundries L.S. 13.0000
= 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
5.1 Providing and laying in position specified grade of reinforced
cement concrete, excluding the cost of centering, shuttering,
finishing and reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from


MATERIAL
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
5.1.2A 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) including
nominal size of Recycled Concrete Aggregate (RCA) up to 20%.

MATERIAL:

Aggregate (RCA)
0367 Portland Cement (0.2833cum) tonne 0.4000
2209 Carriage of cement tonne 0.4000
LABOUR:
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 0.0700
0012 Vibrator (Needle type 40 mm) day 0.0700

9999 Sundries L.S. 14.3000
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say


MATERIAL
LABOUR

9999 Sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
5.1.3A 1:2:4 (1 cement : 2 coarse sand including manufactured sand

derived from Recycled Concrete Aggregate (RCA) up to 20% :
4 graded stone aggregate 20 mm nominal size of Recycled
Concrete Aggregate (RCA) up to 20%).

MATERIAL:

nominal size
Aggregate (RCA)
LABOUR:

9999 Sundries L.S. 14.3000
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
5.2 Reinforced cement concrete work in walls (any thickness),

including attached pilasters, buttresses, plinth and string
courses, fillets, columns, pillars, piers, abutments, posts and
struts etc. above plinth level up to floor five level, excluding
cost of centering, shuttering, finishing and reinforcement :
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from


Details of cost for 9.18 cum.
MATERIAL
LABOUR
0114 Beldar day 11.2900

9999 Sundries L.S. 131.8200
Extra labour for lifting of material up to floor V level:
0.75x9.18x2.5 = 17.21
0115 Coolie day 17.2100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 9.18 cum.
Cost for 1 cum.
Say
5.2.2A 1:1.5:3 (1 cement : 1.5 coarse sand including manufactured

sand derived from Recycled Concrete Aggregate (RCA) up to
20% : 3 graded stone aggregate 20 mm nominal size Recycled
Concrete Aggregate (RCA) up to 20%

MATERIAL:

Aggregate (RCA)
LABOUR:
0114 Beldar day 11.2900
0123 Mason (brick layer) 1 st class day 0.9200
0124 Mason (brick layer) 2 nd class day 0.9200

9999 Sundries L.S. 131.8200
Extra labour for lifting of material up to floor V level:
0.75x9.18x2.5
0115 Coolie day 17.2100
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.18 cum
Cost of 1 cum
Say
5.3 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills, staircases
and spiral stair cases above plinth level up to floor five level,
excluding the cost of centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-
III) derived from natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources).

MATERIAL
LABOUR
9999 Sundries L.S. 14.3000
Extra labour for lifting material up to floor V level:
Coolie (2.5x0.75=1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
5.3A Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills, staircases
and spiral staircases above plinth level up to floor five level
excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand
Aggregate (RCA) up to 20%: 3 graded stone aggregate 20 mm

MATERIAL:

nominal size
Aggregate (RCA)
LABOUR:

9999 Sundries L.S. 14.3000
Extra labour for lifting material up to floor V level:Coolie
(2.5x0.75)
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
5.4 Providing and laying up to floor five level reinforced cement

concrete in kerbs, steps and the like excluding the cost of
centering, shuttering, finishing and reinforcement with 1:1.5:3
(1 cement : 1.5 coarse sand(zone-III) derived from natural
derived from natural sources).

MATERIAL
4.4.1 Cement concrete 1:1.5:3 (Rate as per item no 4.4.1 of cum 1.0000
SH:Concrete work)
LABOUR
Extra labour for laying CC in RCC work :
0128 Mate day 0.0400
(Extra labour for lifting material up to floor V level : Coolie =
0.75 x 2.5 = 1.88)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
5.4A Providing and laying up to floor five level reinforced cement

concrete in kerbs, steps and the like excluding the cost of
centering, shuttering, finishing and reinforcement with 1:1.5:3
(1 cement : 1.5 coarse sand including manufactured sand
derived from Recycled Concrete Aggregate (RCA) up to 20% :
3 graded stone aggregate 20 mm nominal size Recycled

MATERIAL:
Sub AR-1 Rate as per Sub AR-1 (Ref item no 4.1.2) cum 1.0000
LABOUR:
Extra labour for laying CC in RCC work
0128 Mate day 0.0400
Extra labour for lifting material up to floor V level:Coolie=
(1.5x0.75)
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
Sub AR-1
(Ref item 4.1.2)
1:1.5:3 (1 cement : 1.5 coarse sand including manufactured
Concrete Aggregate (RCA) up to 20%.

MATERIAL:

nominal size
Aggregate (RCA)
LABOUR:

9999 Sundries L.S. 14.3000
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
5.5 Reinforced cement concrete work in arches, arch ribs, domes,

vaults, shells, folded plate and roofs having slope more than
15° up to floor five level, excluding the cost of centering,
shuttering, finishing and reinforcement with 1:1.5:3 (1 cement
: 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from
natural sources).

Details of cost for 26.73cum
for semi-circular arch 6m clear span and 9m long and 30cm
thick.
Cement concrete 1:1.5:3 =
1x0.50x3.14x6.30x9.00x0.30 = 26.73cum
MATERIAL
LABOUR
0114 Beldar day 73.5100
0101 Bhisti day 24.0600

9999 Sundries L.S. 401.8900
Extra for laying CC over curved surfaces
(Extra labour for lifting material up to floor V level :
Coolie = 0.75 x 2.5 x 26.73 = 50.12)
0115 Coolie day 50.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 26.73 cum.
Cost for 1 cum.
Say
5.5A Reinforced cement concrete work in arches, arch ribs, domes,
vaults, shells, folded plate and roofs having slope more than
15° up to floor five level excluding the cost of centering,
shuttering, finishing and reinforcement with 1:1.5:3 (1 cement
: 1.5 coarse sand including manufactured sand derived from
stone aggregate 20 mm nominal size Recycled Concrete
Aggregate (RCA) up to 20%).

Details of cost for 26.73cum for semi-circular arch 6m clear
span and 9m long and 30cm thick.

Cement concrete 1:1½:3 =
1x0.50x3.14x6.30x 9.00x0.30 = 26.73cum
MATERIAL:
0297 Stone Aggregate (Single size) : 10 mm nominal size

derived from natural sources cum 5.9870

nominal size
Aggregate (RCA)
LABOUR:
0114 Beldar day 73.5100
0101 Bhisti day 24.0600

9999 Sundries L.S. 401.8900
Extra for laying CC over curved surfaces
Extra labour for lifting material up to floor V level: Coolie =
(1.50x0.75x26.73)
0115 Coolie day 50.1200
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 26.73 cum
Cost of 1 cum
Say
5.6 Reinforced cement concrete work in chimneys, shafts, up to

floor five level, excluding the cost of centering, shuttering,
finishing and reinforcement with 1:1.5:3 (1 cement : 1.5
coarse sand(zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural
sources).

MATERIAL
RCC 1:1½:3 in chimneys & shafts
5.2.2 Rate as per Item No.5.2.2 of SH: REINFORCED CEMENT cum 1.0000
CONCRETE
LABOUR
Extra labour involved for lifting materials
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
5.6A Reinforced cement concrete work in chimneys, shafts, up to

floor five level excluding the cost of centering, shuttering,
finishing and reinforcement with 1:1.5:3 (1 cement : 1.5
stone aggregate 20 mm nominal size (Recycled Concrete
Aggregate (RCA) up to 20%).

MATERIAL:
RCC 1:1.5:3 in chimneys & shafts
5.2.2A Rate as per Item Number 5.2.2A of SH: Reinforced cement cum 1.0000
concrete work
Extra labour involved for lifting materials
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
5.7 Reinforced cement concrete work in well-steining, excluding

the cost of centering, shuttering, finishing and reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

MATERIAL
RCC 1:1½:3 in well steining
4.1.2 Rate as per Item No.4.1.2 of SH: CONCRETE WORK cum 1.0000
LABOUR
Extra labour involved :
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
5.7A Reinforced cement concrete work in well-steining excluding

the cost of centering, shuttering, finishing and reinforcement,
with 1:1.5:3 (1 cement : 1.5 coarse sand including
MATERIAL:
RCC 1:1.5:3 in well steining
Sub AR 1 Rate as per Sub AR-1 (Ref item 4.1.2) cum 1.0000
Extra labour involved
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
5.8 Reinforced cement concrete work in vertical and horizontal

fins individually or forming box louvers, facias and eaves
boards above plinth level up to floor five level, excluding the
cost of centering, shuttering, finishing and reinforcement with
1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate 20mm nominal

Details of cost for 4 RCC Vertical fins 4m high and 1m center
with 2 horizontal fins, all projecting 60cm from face of wall
and 5cm thick = 0.66 cum.
Cement Concrete 1:1.5.3

4x4x0.60x0.05 = 0.48 cum.
2x3x0.06x0.05 = 0.18 cum.
Total = 0.66 cum.
MATERIAL
LABOUR

Extra for restricted working in fins
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.66 cum.
Cost for 1 cum.
Say
5.8A Reinforced cement concrete work in vertical and horizontal

fins individually or forming box louvers, facias and eaves
boards above plinth level up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement,

Details of cost for 4 RCC Vertical fins 4m high and lm center
with 2 horizontal fins, all projecting 60cm from face of wall
and 5cm thick = 0.66 cum.
Cement Concrete 1:1.5.3

4x4x0.60x0.05 = 0.48 cum
2x3x0.06x0.05 = 0.18 cum.
Total = 0.66 cum.
MATERIAL:

nominal size
Aggregate (RCA)
LABOUR:

Extra for lifting materials up to floor five level
Extra for restricted working in fins
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 cum
Cost of 1 cum
Say
5.9 Centering and shuttering including strutting, propping etc. and

removal of form for
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete
Details of cost for footing size 2.7mx2.7mx1.00m
MATERIAL
use of 40 times
Adding for maintenance @ 10% of cost

Qty taken for cost of using once = 8x0.85/40= 0.17
Qty taken for cost using once = 1040x0.85/40 = 22.10
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
5.9.2 Walls (any thickness) including attached pilasters, buttresses,

plinth and string courses etc.
MATERIAL
use of 40 times

2x3x2x2 = 24Nos.
4x2 = 8
2x6x2 = 24
2x3x2 = 12
2x2x8m = 32m
9999 Nut & Bolts L.S. 27.6200
Qty taken for cost using once =1300x0.85/40 = 27.62
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries L.S. 52.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
5.9.3 Suspended floors, roofs, landings, balconies and access

platform
Detail of cost for a room
4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL
1. Plates (size 0.75 x 0.60)

Angle 40x40x5mm
2x0.75 = 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
sheet 1.6 mm thick
0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Weight of one plate = 13.75kg
Add for wastage @ 5% = 0.69 kg
Total = 14.44kg
Total weight of all plates = 5x6x14.44 = 433.2 kg.
Qty taken for cost using once = 433.2x0.85/40 = 9.2055 kg

7342 Adjustable span ESO+SI (2.35-3.40) each 0.1063
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each 0.1275
9999 4. Assembly nut & bolts etc. L.S. 22.1000
9977 Carriage L.S. 130.0000
LABOUR
9999 Sundries, paper tap etc. L.S. 49.7000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 13.50 sqm.
Cost per sqm.
Say
5.9.4 Shelves (Cast in situ)

4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL
1. Plates (size 0.75 x 0.60)

Angle 40x40x5mm
2x0.75 = 1.50 m
10.1 2x0.60 = 1.20 m kg 9.2055
= 2.70 m @ 3.00 kg/m = 8.1 kg
sheet 1.6 mm thick
0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Total = 14.44kg
Qty taken for cost using once = 433.2x0.85/40 = 9.2055 kg
Rate as per item no.10.1 S.H. steel work

9999 4. Assembly nut & bolts etc. L.S. 22.1000
9977 Carriage L.S. 130.0000
LABOUR
9999 Sundries, paper tap etc. L.S. 49.7000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 13.50 sqm.
Cost per sqm.
Say
5.9.5 Lintels, beams, plinth beams, girders, bressummers and

cantilevers
Consider a beam of 6 m clear span, 0.50 m deep 0.30 m wide
and height 3.5 m from floor
Cubical contents
6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
MATERIAL
times
Add maintenance charges @ 10% of cost of material
Less salvage value of material after full use @ 25% of cost of
material
1. Steel plates for side and bottom
(plate size 1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m
3x0.50 = 1.50 m
3.90 m @ 3.00 kg/m = 11.70 kg
sheet 1.6 mm thick
1.20m x 0.50 m = 0.60 sqm.
0.60 sqm @ 12.55 kg/sqm. = 7.53 kg.
Weight of one plate = 19.23 kg.
Add for wastage @ 5% = 0.96 kg.
Total = 20.19 kg.
Total weight of all plates
3x5x20.19 = 302.85 kg or 3.03 q
kg.
Qty taken for cost of using once = 6x0.85/40 = 0.1275 m
7344 Beam clamp 300-380 mm (450-1070 mm) each set 0.1063
Qty taken for cost of using once = 5x0.85/40 = 0.1063 m
9999 (iv) Assembly nut & bolts etc. L.S. 22.1000
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries, paper tape etc. L.S. 24.6100
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.80 sqm.
Cost per sqm.
Say
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

Detail of cost for 4.5 sqm
Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
MATERIAL
times
material
7332 Corner angle 45x45x5 m 2.50 m long each 0.0850
7333 Column clamp 450x1070 m each 0.1063
7334 Prop 2 m ( 2-3.5m) each 0.0850
9999 Assembly nut & bolt L.S. 27.6200
9977 Carriage L.S. 52.0000
LABOUR
9977 Carriage L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 4.5 sqm.
Cost per sqm.
Say
5.9.7 Stairs, (excluding landings) except spiral-staircases

Details of cost for 5.79 sqm.
Details of staircase, 3.40m clear span including 1m landing.
MATERIAL
(i) Cost of plank 38mm (2nd class kail wood)
Waist 2.69x1.30 = 3.50sqm.
Side shuttering of steps and side of waist-Steps
8x1.30x0.15 = 1.56 sqm.
Face of landing
1x1.30x0.15 = 0.20 sqm.
Side of waist
2.69x0.13 = 0.35 sqm.
Side of steps-
8x0.50x0.30x0.15 = 0.18sqm.
Total = 5.79 sqm.
Wastage 5% = 0.29sqm.
Total = 6.08 sq.
Cubical content- 6.08x0.038 = 0.231 cum = 231 dm³
Qty taken for cost using once = 231/8= 28.875 cudm
(ii) Batten 100mm x 75mm
4x1.30x0.100x0.075=0.039 cum = 39 dm³
Qty taken for cost using once = 39/8 = 4.875 cudm
2x4x0.80 = 6.40m
Qty taken for cost using once = 6.4/8 = 0.8 m
Planks = 0.231 cum.
Battens = 0.039 cum.
Ballies 6.4x3.142/4x(0.125)² = 0.079cum.
Total = 0.349 cum.
Qty taken for cost using once = 0.349/8 = 0.04363 cum
LABOUR
For assembling, erection, dismantling and cleaning
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.79 sqm.
Cost per sqm.
Say
5.9.8 Spiral staircases (including landing)

Detail of cost for 6.28 sqm (For 10 steps)
Treads
10x0.70x0.20(av.) = 1.40 sqm
5.9.5 Rate as per Item Number 5.9.5 of SH: RCC sqm 1.4000
Riser
2x10x0.70x0.23 = 3.22 sqm
5.9.2 Rate as per item no 5.9.2 of SH : RCC sqm 3.2200
Newal Post (Column)
10x0.23x3.14x0.23 = 1.66 sqm
5.9.7 Rate as per item no 5.9.7 of SH: RCC sqm 1.6600
Cost of 6.28 sqm
Cost of 1 sqm
Say
5.9.9 Arches, domes, vaults up to 6 m span

Details of cost for a semi-circular arch 3.6m clear span and 3.6
m long.
Area of centering = 22/7x1.8x3.6=20.37sqm.
MATERIAL
Frame work in 2nd class kail wood
Tie-1x3.6x0.15x0.20 = 0.108cum.
Struts-3x1.8x0.10x0.10 =0.054cum
Struts-2x2.55x0.10x0.10=0.051cum.
Ribs-4x1.38x.075x0.075=0.031cum.
Total = 0.244 cum.
Quantity for 7 such frames
7x0.244 = 1.708cum.
Strips 5cmx2.5cm = 7.5cm
center to center
5.66/0.075x0.05x0.025x3.6 = 0.342cum.
Total= 2.050 cum = 2050 cudm
Safeda ballies 125 mm dia
7x4x3.6= 100.8m
G.I. Plain sheet 20.37 sqm m 116kg. Or 1.16 quintal
Qty taken for cost using once =1.16/8 = 0.145 qtl
0992 Galvanised steel plain sheets quintal 0.1450
Carriage-
Kail wood = 2.05cum.
Ballies - 100.8x(0.125)²/4x3.142 = 1.24cum.
Total = 3.29 cum.
G.I. Sheet = 0.116 t
Qty taken for cost using once = 0.116/8 = 0.0145 t
2302 Carriage of G.I.sheet and accessories tonne 0.0145
LABOUR
0114 Beldar day 13.0000
9999 Sundries L.S. 11.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.37sqm.
Cost per sqm.
Say
5.9.10 Extra for arches, domes, vaults exceeding 6 m span

Details of cost for 33.31 sqm
Centering and shuttering for arches and carved surface
exceeding 6m in span (an average of 8m)
Radius R = 5m 2R-2 = 8
tan -¹ (4/3)=53.28°
2x53.28° = 106°
Surface area =2x22/7x5x3.6x106/360 =33.31sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
For four such frames =0.476x4 = 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum. or 7103 cudm
Qty taken 1/8th of qty for cost using once =7.103/8 = cum =
887.9 Cudm
Fittings:
3 way straps 50mmx10mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmx10mm = 8 Nos. @ 0.25cm each = 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once = 0.702/8 = 0.08775
1225 Mild steel flat strap fitting quintal 0.0878

Bolts 160 Nos. 254 mm long 16mm dia.-
160x.254x 1.58=64.21 kg=0.64q.
Qty taken l/8th of qty for cost using once =0.64/8 = 0.08
1034 Bolts and nuts up to 300 mm in length quintal 0.0800
Qty taken 1/8th of qty for cost using once = 0.1342/8 =
0.01677 t say 0.0168 t
LABOUR
0114 Beldar day 24.0000
9999 Sundries L.S. 134.5500
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e.
for an average of 8 m span
5.9.9 Rate as per item no 5.9.9 of SH : RCC sqm -33.3100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 33.31sqm.
Cost per sqm of soffit area
Say
5.9.11 Chimneys and shafts

MATERIAL

2x3x2x2 = 24 Nos. Qty taken for cost of
using once = 24x0.85/40 = 0.51
4x2 = 8
2x6x2 = 24
2x3x2 = 12
2x2x8m = 32m
9999 Nut & Bolts L.S. 27.6300
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries L.S. 52.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
5.9.12 Well steining

Details of cost 26.39 sqm. Surface area
Outside area = 26.39 sqm
MATERIAL
Assuming that the timber will become unserviceable after
being used 8 times
Planks 38 mm (Second class kail wood) 26.39x0.038 =
1.00cum.
Wastage 20% = 0.20cum.
Total = 1.20cum. or 1200 cudm.
Qty for cost using once = 1200/8=150 cudm
1198 Second class kail wood in planks 2nd class kail wood battens 10 cudm 15.0000
Inside = 2x25x0.50x0.075x0.038 = 0.0712cum.

Outside =2x28x0.50x0.075x0.038 = 0.0798cum.
Total = 0.1510cum.
Wastage 5% = 0.0076 cum.
Total = 0.1586 cum = 158.60 cudm
Qty for cost using once = 0.1586/8= 0.0198 cudm
Inside: 25x1.00 = 25.00m
Outside: 28x1.00 = 28.00m
Total = 53.00m
Qty for cost using once = 53/8 =6.625 m
TOTAL
Add for carriage, labour for erection and dismantling etc @
1/6 (16.667%) of cost of material
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 26.39sqm.
Cost per sqm.
Say
5.9.13 Vertical and horizontal fins individually or forming box louvers

band, facias and eaves boards
Details of cost for fins 4 vertical fins 4 metre high and at 1
metre centres, with two horizontal fins all projecting 60cm
from face of wall and 5 cm thick.
i.e. (4x4x1.25) + (2x3x0.65) = 23.90sqm + 5%

wastage = 25.10 sqm.
MATERIAL
38mm thick-
4x4x1.25=20.00
2x3x0.65 =3.90
Total = 23.90
Wastage @ 5% = 1.20
Total = 25.10sqm.
25.10x0.038=.954 cum or 954 cudm
Qty for cost using once = 954/8 = 119.25 cudm
4x2x5x0.60x0.075x0.050=0.090
3x2x5x1.00x0.075x0.050=0.112
2x6x0.60x0.075x0.100=0.054 = 0.256 Cum.
Wastage @ 5% =0.013 cum
Total = 0.269 cum= 269 cudm
Qty for cost using once = 269/8 = 33.625 cudm
2x2x6x4.00 =96m
Wastage @5% = 4.8m
Total= 100.8 m
2204 Qty for cost using once = 100.8/8 = 12.6 m cum 0.3076
Carriage of Timber
Planks = 0.954
Battens = 0.269
Bailies 100.8x(0.125)²/4x3.142= 1.238cum.
Total = 2.461 cum
Qty for cost using once = 2.461/8 = 0.3076 cum
LABOUR
For assembling, erection, dismantling and cleaning
0114 Beldar day 11.0000
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 23.90 sqm.
Cost per sqm.
Say
5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in

cornices, window sills, string courses, bands, copings, bed
plates, anchor blocks and the like

Details of cost for footing size
2.7mx2.7mx1.00m
MATERIAL
use of 40 times

4x2.7m = 10.8m
Qty taken for cost of using once = 10.8x0.85/40 =0.2295
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
5.9.16 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide
Details of cost for a 3mx3m slab 15cms thick
12m edge Length
MATERIAL
being used 8 times.
(i) Planks 30mm thick (2nd class Kail wood
or equivalent local soft wood)
4x3x0.15x0.030=0.054cum
Wastage @5% = 0.003 cum.
Total = 0.057 cum 57 cudm
Qty taken for cost of using once = 57/8 =7.125 cudm
(ii) Battens 75mmx100mm (2nd class Kail wood)
Horizontal 2x4x0.075x0.1x0.5=0.030
Horizontal 2x4x0.075x0.1x1.5=0.090
(iii) Vertical battens
16x0.15x0.075x0.030m = 0.0054
(iv) Struts
16x0.25x0.075x0.075=0.0225
Total = 0.1479
Wastage @5% = 0.0074
Total = 0.1553 cum = 155 cudm
Qty taken for cost of using once = 155/8 =19.375 cudm
Planks = 0.057 cum.
Total = 0.212 cum.
LABOUR
For assembling erection dismantling & cleaning.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 12 metres
Cost of one meter
Say
5.9.16.2 Above 20 cm wide

Details of cost for 4mx4xslab 25cms thick
16 metre edge length
Shuttering surface area = 16 x 0.25 = 4 sqm
MATERIAL
(i) Planks 38mm thick
4x4x0.25x0.038 = 0.152
Wastage @ 5% = 0.008
Total = 0.160 cum. = 160 cudm
Qty taken for cost of using once = 160/8 = 20 cudm
(ii) Battens
6x2x0.6x0.075x0.100=0.054
5x2x1.5x0.075x0.100=0.113
Total = 0.167
Wastage @ 5% = 0.008
Total= 0.175 cum. = 175 cudm
Qty taken for cost of using once = 175/8 = 21.88 cudm
Planks = 0.16 cum.
Total = 0.335 cum.
LABOUR
For assembling erection dismantling & cleaning.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4 sqm.
Cost of 1 sqm.
Say
5.9.17 Cornices and mouldings

Details of cost for 10m long moulding 10cm projection, 20cm
depth and 40cm girth
Area in contact 10x0.4 = 4.0 sqm.
MATERIAL
being used 8 times.
(I) Planking 30mm thick = 4sqm..
Extra & Wastage 20% = 0.8 sqm
Total = 4.8 sqm.
4.8x0.038 = 0.182 cum = 182 cudm
(ii) Battens-Joining to Planking 1x10x0.1x0.075 = 0.075 cum.
From bottom shuttering 10x1.5x0.1x0.075 = 0.113 cum.

Wales 10x0.4mx0.1x0.075 = 0.030 cum.
2447 Hollock ballies 125 mm diameter metre 3.1500
(iii) Ballies 125 mm dia.
Slant 10x0.3 = 3 m ver. 6x3.5 = 21.0 m Total= 24.0 m
Wastage @ 5% = 1.2 m
Total= 25.2 m
Qty taken for cost using once = 25.2/8 = 3.15m
Planking = 0.188 cum.
Battens & Wales = 0.218 cum.
Ballies 25.2x22/7x(0.125)²/4 = 0.310 cum.
Total = 0.710 cum.
Qty taken for cost using once = 0.71/8= 0.0888 cum
LABOUR
Labour for assembling, erection, dismantling & cleaning

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4 sqm.
Cost of 1 sqm.
Say
5.9.18 Small surfaces such as cantilever ends, brackets and ends of

steps, caps and bases to pilasters and columns and the like

Details of cost for a bracket
1.20m projected
Front area 0.50x0.60m
End area 0.50x0.75m
Area in contact with concrete
2x{(0.60+0.75)/2x1.2} = 1.62 sqm.
Front 0.5x0.6 = 0.30 sqm.
Bottom 0.5x1.21 = 0.605 sqm.
Total = 2.525 sqm.
MATERIAL
being used 8 times.
Timber IInd class kail wood or equivalent local soft wood
(I) Plank 30mm thick.

Sides 2{(0.60+0.75)/2x1.238} = 1.6713sqm
Battens 0.576x1.21 = 0.697
Front 0.5x0.638 = 0.319
Total = 2.687 sqm.
Cubical contents
2.687x0.038 = 0.102 cum.
Wastage @ 5% = 0.005 cum.
Total = 0.107 cum.
(ii) Battens-0.05x0.05
2x1.238 = 2.476m
2x1.21 = 2.42m
2x0.688 = 1.376m
2x0.838 = 1.676m
3x0.5 = 1.50m
Total = 9.448m
Cubical contents
9.448x0.05x0.05 = 0.024 cum.
Wastage 5% = 0.0012 cum.
Total = 0.0252 cum = 25.2 cudm
Qty taken for cost using once = 25.2/8 = 3.15 cudm
(iii) Ballies 125mm dia.
1x2.5 = 2.50m
1x2.65 = 2.65m
Total = 5.15 m
Wastage 5% = 0.26m
Total = 5.41 m
Qty taken for cost using once = 5.41/8= 0.6763 m
Planks = 0.107 cum.
Ballies 5.41x22/7x(0.125²/4 = 0.066 cum.
Total = 0.198 cum
Qty taken for cost using once = 0.198/8 =0.0248 cudm
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.525 sqm.
Cost of 1 sqm.
Say
5.9.19 Weather shade, Chajjas, corbels etc., including edges

Details of cost for a weather shade
Area of centring and shuttering = 0.954 sqm
For a weather shade over a window of size 1.5mx1.2m
Size of weather shade 1.80x0.45m
Thickness at front = 0.05m
Thickness at fixed edge = 0.07m
Area in contact with concrete Bottom
1x0.45x1.80 = 0.810
1x0.05x1.80 = 0.090
2x0.45x0.06 = 0.054
Total = 0.954 sqm.
MATERIAL
being used 8 times.
(i) Planking 38mm thick.
Bottom 1x1.876x0.488 = 0.915 sqm.
1x1.876x0.05 = 0.94 sqm.
2x0.45x0.06 = 0.027 sqm.
Total = 1.036 sqm.
Add 5% wastage = 0.052 sqm.
Total = 1.088 sqm.
Cubic contains
1.088x0.038 = 0.041 cum = 41 cudm
(ii) Battens-
2x0.60x0.075x0.10 = 0.009
Ends with bearing center
1x0.45x0.075x0.10 = 0.003
Qty taken for cost using once =12/8=1.50 cudm
(iii) Ballies 125mm dia.
2x2.1 = 4.2m
Wastage 5% = 0.21m
Total = 4.41 m
Qty taken for cost using once = 4.41/8 = 0.5513 m
Carriage:
Plank = 0.041 cum.
Ballies
4.41x22/7x(0.125)²/4 = 0.054 cum.
Total = 0.107 cum
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.954 sqm.
Cost of 1 sqm.
Say

platform with water proof ply 12 mm thick
4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL
10.1 Rate as per Item No.10.1 of SH:Steel Work kg 5.4250

Plates (size 0.75 x 0.60)
Angle 40x40x5mm
2x0.75 = 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
Total = 8.51kg
Qty taken for cost using once.=
255.30x0.85/40 = 5.425 kg
Welding length = (30x32)/40=24 cm
1215 Welding by electric plant cm 24.0000
8659 Water proof ply 12mm thick. sqm 1.7700
1x4.50x3.00=13.50sqm
Add wastage @ 5% =0.68sqm
Total 14.18sqm
Qty taken for cost using once 14.18/8 = 1.77sqm
9999 Assembly nut & bolts etc. L.S. 12.6300
9977 Carriage L.S. 130.0000
LABOUR
9999 Sundries L.S. 52.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 13.50 sqm.
Cost per sqm.
Say
5.9.21 Lintels, beams, plinth beams, girders, bressummers and

cantilevers with water proof ply 12 mm thick
Details of cost for a beam of 6 m clear span, 0.50 m deep 0.30
m wide and height 3.5 m from floor
Cubical contents 6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
MATERIAL
times
material
10.1 Rate as per Item No.10.1 of SH:Steel Work kg 3.7200
Steel plates for side and bottom (plate size 1.20 x 0.50m)
Angle 40x40x5mm (both sides) & bottom

2x(2x1.20) = 4.80 +(2x1.2) =7.20m
2x(3x0.50)=3.00+(3x0.30)=3.9m
11.10 m @ 3.00 kg/m =33.30 kg
Weight of one plate = 11.70 kg.
Add for wastage =1.67kg.
Total =34.97 kg.
Total weight of all plates
5x34.97 = 174.85 kg
Qty taken for cost of using once = 174.85x0.85/40 =3.72 kg
Welding length 480/40= 12 cm

8659 Water proof ply 12mm thick. sqm 1.0200
1x1.30x6.00 = 7.80 sqm
Add 5% wastage = 0.39 sqm
Total = 8.19 sqm
Qty taken for cost of using once 8.19/8 sqm= 1.02 sqm
Qty taken for cost of using once = 6x0.85/40 =0.1275 m
7344 Beam clamp 300-380 mm (450-1070 mm) each set 0.1063
Qty taken for cost of using once = 5x0.85/40 = 0.1063m
9999 Assembly nut & bolts etc. L.S. 11.0500
9977 Carriage L.S. 78.0000
LABOUR
9999 Sundries, paper tape etc. L.S. 26.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.80 sqm.
Cost per sqm.
Say
5.10 Providing and fixing tie bolt, spring coil and plastic cone in wall
shuttering complete as per the direction of Engineer-in-
charge.
5.10.1 12 mm dia. & 100 mm length

7320 Details of cost for wall length 7.90mx1m (24 set) each 24.0000
MATERIAL
Tie bolt 12 mm dia 100 mm length
7324 Spring coil 12 mm each 48.0000
7325 Plastic cone 12 mm dia each 48.0000
9977 Carriage: L.S. 13.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
5.10.2 12 mm dia. & 150 mm length

Details of cost for wall length 7.90mx1m (24 set)
MATERIAL
7321 Tie bolt 12 mm dia 150 mm length each 24.0000
9977 Carriage: L.S. 13.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
5.10.3 20 mm dia. & 150 mm length

MATERIAL
9977 Carriage: L.S. 13.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
5.10.4 20 mm dia.& 225 mm length

MATERIAL
9977 Carriage: L.S. 13.0000
LABOUR
9999 Sundries L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
5.11 Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc., including cost
of de-shuttering and decentering at all levels, over a height of
3.5 m, for every additional height of 1 metre or part thereof
(Plan area to be measured).
5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan

area to be measured)
Details of cost for a Room of size 6mx4.8m = 28.8 sqm
. MATERIAL
Assuming that shuttering material will become unserviceable
after use 40 times
material
Add 10% of cost of material for maintenance
7345 Prop 4 m each 0.4463
Qty taken for cost using once = 21 x0.85/40 = 0.4463
Deduct the rate of 3m prop
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each -0.4463
Bracing
MS tube 40mm
7x4.8m = 33.60m
3x6.0m = 18.00m
Total = 51.60m
Qty taken for cost using once =51.6x0.85/40 = 1.0965
7346 Double coupler (40x40) each 0.4463
Qty taken for cost using once = 21 x0.85/40 = 0.4463
9977 Carriage L.S. 65.0000
LABOUR
9999 Sundries L.S. 130.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 28.8 sqm.
Cost per sqm.
Say
5.12 Providing, hoisting and fixing above plinth level up to floor five
level precast reinforced cement concrete work in string
courses, bands, copings, bed plates, anchor blocks, plain
window sills and the like, including the cost of required
centering, shuttering but , excluding cost of reinforcement
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

MATERIAL
Cement concrete 1:1½:3 in string or lacing course etc
(NB : Rate has been taken including cost of fixing in CM 1:2 as
precast members are to be fixed in CM 1:2)(1 cement : 2
coarse sand) as per CPWD specifications)
LABOUR
0128 Mate day 0.0400
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
5.12A Providing, hoisting and fixing above plinth level up to floor five
level precast reinforced cement concrete work in string
courses, bands, copings, bed plates, anchor blocks, plain
window sills and the like, including the cost of required
centering, shuttering but excluding cost of reinforcement,

MATERIAL:
Cement concrete1:1.5:3 in string or lacing course etc
(NB : Rate has been taken including cost of fixing in CM 1:2 as
precast members are to be fixed in CM 1:2)(1 cement: 2
coarse sand) as per CPWD specifications
LABOUR:
0128 Mate day 0.0400
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
Sub AR-2
(Ref item no 4.5.1)

Details of cost for Plain window sill 15 nos.15x1m x0.20m
x 0.15m = 0.45cum.
MATERIAL:
Extra labour for lifting 0.45 x 0.45 x 2.5 = 0.51
Centering and shuttering(1) Mould (i) Plate 3mm thick:
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m2 = 8.48
kg. (ii) Flat 10x5mm: 4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 =
0.60m Handle 2x0.25 = 0.5m=6.70 m @ 0.4kg/m = 2.68 kg.
Assuming shuttering will become unserviceable after use
of 40 times and taking 75% credit.Qty taken for cost of

using once = 0.112x0.75/40 = 0.0021 qtl = 0.21 kg
10.1 Rate as per Item Number 10.1 of SH: Steel work (2) kg 0.2100
Moulding Platform
times, (i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 =
0.1 sqm
11.1.2 Rate as per Item Number 11.1.2 of SH: Flooring sqm 0.1000
2.00x2.00x0.025 = 0.10cum Qty taken for cost of using once =
0.100/40 = 0.0025 cum
Sub AR-3 Rate as per sub AR-3 (Ref Item No.11.7) cum 0.0025
Total
TOTAL
TOTAL
TOTAL
Cost of 0.45 cum
Cost of 1 cum
Say
Sub AR-3
(Ref Item No.11.7)
Cement concrete pavement with 1:1.5:3 (1 cement : 1.5
Recycled Concrete Aggregate(RCA) up to 20% : 3 graded stone
aggregate 20 mm nominal size Recycled Concrete Aggregate
(RCA) up to 20%). including finishing complete.

MATERIAL
Sub AR-1 Rate as per Sub AR-1 (Ref item no.4.1.2) cum 1.0000
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
5.13 Providing, hoisting and fixing up to floor five level precast

reinforced cement concrete in small lintels not exceeding
1.5m clear span up to floor five level, including the cost of
required centering, shuttering but , excluding the cost of
reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-
III) derived from natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources).

Details of cost for a lintel :
Qty = 0.054 cum
MATERIAL
1.5m clear span = 1.8x0.20x0.15 = 0.054 cum.
Cement Concrete 1:1½:3
4.2.2 Rate as per Item No.4.2.2 of SH: Concrete Work cum 0.0540
Centring and shuttering
4.3.1 Rate as per item no. 4.3.1 of SH: Concrete work sqm 0.6000
LABOUR
0128 Mate day 0.0020
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.054 cum.
Cost per cum
Say
5.13A Providing, hoisting and fixing up to floor five level precast

reinforced cement concrete in small lintels not exceeding 1.5
m clear span up to floor five level, including the cost of
required centering, shuttering but excluding the cost of
reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand

Details of cost for a lintel Qty = 0.054 cum
MATERIAL:
1.5m clear span = 1.8x0.20x0.15 = 0.054 cum.
Cement Concrete 1:1.5:3
4.3.1 Rate as per Item Number 4.3.1 of SH: Concrete work sqm 0.6000
LABOUR:
0128 Mate day 0.0000
Total
TOTAL
TOTAL
TOTAL
Cost of 0.054 cum
Cost of 1 cum
Say
Sub AR-4
(Ref item no 4.2.2)

MATERIAL:

nominal size
Aggregate (RCA)
LABOUR:
0012 Vibrator (Needle type 40 mm) Scaffolding day 0.0700

9999 Sundries L.S. 14.3000
Extra for lifting material up to floor level = 0.75x2.5=1.88

Total
TOTAL
TOTAL
TOTAL
Cost of1.00 cum
Cost of 1 cum
Say
level precast reinforced cement concrete in mouldings as in
cornices, windows sills etc, including setting in cement mortar
1:3 (1 cement : 3 coarse sand) cost of required centering,
shuttering but, excluding the cost of reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

Details of cost for 1mx0.20x0.15=0.03 cum
MATERIAL
Extra labour for lifting
0.45 x 0.03 x 2.5 = 0.034
9999 Mortar and labour for hoisting and for fixing L.S. 2.7300
4.3.1 Rate as per Item No.4.3.1 of SH: Concrete Work sqm 0.3600
9999 Add for extra labour for hoisting L.S. 1.6100
53.82x0.03 = 1.61
LABOUR
Add Extra labour for moulding :
0.58x0.03
0.58x0.03
1.5x0.03
0.06x0.03
Extra labour for laying CC in RCC
0.1x0.03
0.2x0.03
0.04x0.03
0.04x0.03
0128 Mate day 0.0012
0.04x0.03
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.03 cum
Cost for 1 cum.
Say
level precast reinforced cement concrete in mouldings as in
cornices, windows sills etc. including setting in cement mortar
1:3 (1 cement : 3 coarse sand) cost of required centering,
shuttering but excluding the cost of reinforcement, with

Details of cost for one 1 x 0.20 x 0.15 = 0.03 cum
MATERIAL:
Sub AR-1 Rate as per sub AR-1 (Ref item no 4.1.2) cum 0.0300
Extra labour for lifting
0.45 x 0.03 x 2.5 = 0.034
9999 Mortar and labour for hoisting and for fixing L.S. 2.7300
53.82x0.03
9999 Add for extra labour for hoisting L.S. 1.6100
LABOUR:
Add Extra labour for moulding
0.58x0.03
0.58x0.03
1.5x0.03
0.06x0.03
Extra labour for laying CC in RCC
0.1x0.03
0.2x0.03
0.04x0.03
0.04x0.03
0128 Mate day 0.0012
0.04x0.03
Total
TOTAL
TOTAL
TOTAL
Cost of 0.03 cum
Cost of 1 cum
Say
level precast reinforced cement concrete in lintels, beams and
bressummers, including setting in cement mortar 1:3 (1
cement : 3 coarse sand), cost of required centering and
shuttering but , excluding the cost of reinforcement, with
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

Details of cost for beam 6.60m long 0.50m deep and 0.30m
wide = 6.60x0.50x0.30 = 0.99 cum.

MATERIAL
4.3.1 Rate same as per item no. 4.3.1 of SH: Concrete work sqm 6.9000
Extra labour for lifting material up to floor V level
LABOUR
Extra labour for laying cement concrete in RCC work
0.10x0.99
0.20x0.99
0.04x0.99
0.04x0.99
0128 Mate day 0.0396
0.04x0.99
9999 Cement mortar 1:3 for fixing L.S. 89.7000
9999 Labour for hoisting, Transporting and setting in position L.S. 269.1000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.99 cum
Cost for 1 cum.
Say
level precast reinforced cement concrete in lintels, beams and
bressummers including setting in cement mortar 1:3 (1
cement : 3 coarse sand), cost of required centering and
shuttering but excluding the cost of reinforcement with,

Details of cost for a beam 6.60m long 0.50m deep and
0.30m wide = 6.60x0.50x0.30 = 0.99 cum
MATERIAL:
LABOUR:
Extra labour for laying cement concrete in RCCwork
0.10x0.99
0.20x0.99
0.04x0.99
0.04x0.99
0128 Mate day 0.0396
0.04x0.99
Total
TOTAL
TOTAL
TOTAL
Cost of 0.99 cum
Cost of 1 cum
Say
level precast reinforced cement concrete in shelves, including
setting in cement mortar 1:3 (1cement : 3 coarse sand), cost
of required centering, shuttering and finishing with neat
cement punning on exposed surfaces but , excluding the cost
of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse
aggregate 20 mm nominal size derived from natural sources).

Details of cost for on shelf 0.90x0.45x0.04m thick =
0.90x0.45x0.04m = 0.0162 cum
Finishing
13.18 Rate same as per item no. 13.18 of SH : Finishing sqm 0.8500
Centring and shuttering:
4.3.1 Rate same as per item no. 4.3.1 of SH : concrete work sqm 0.1080
2x(0.90+0.45)x0.04 = 0.108 sqm
LABOUR
Extra labour for laying cement concrete in RCC work due to
delay etc.
0128 Mate day 0.0006
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.0162 cum
Cost for 1 cum.
Say
level precast reinforced cement concrete in shelves including
setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost
of required centering, shuttering and finishing with neat
cement punning on exposed surfaces but excluding the cost
of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand

Details of cost for one shelf 0.90x0.45x0.04m thick =
0.90x0.45x0.04m = 0.0162 cum
Finishing
13.18 Rate as per Item Number 13.18 of SH: Finishing sqm 0.8500
Centring and shuttering:2x(0.90+0.45)x0.04 = 0.108 sqm
LABOUR:
delay etc.
0128 Mate day 0.0006
9999 Labour for hoisting, Transporting and setting L.S. 13.5200
Total
TOTAL
TOTAL
TOTAL
Cost of 0.0162 cum
Cost of 1 cum
Say
level precast reinforced cement concrete in vertical &
horizontal fins, individually or forming box louvers, setting in
cement mortar 1:2 (1 cement : 2 coarse sand), including the
cost of required centering, shuttering but , excluding the cost
of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse
aggregate 20 mm nominal size derived from natural sources).

Details of cost for 4 RCC vertical fins 4m high at 1m centre to
centre with two horizontal fins, all projecting 60cm from face
of wall and 5cm thick cubical contents = 0.66 cum.
MATERIAL
4.3.1 Rate as per item no. 4.3.1 of SH: Concrete work sqm 2.5600
LABOUR
delay etc.
0128 Mate day 0.0264
9999 Sundries L.S. 17.9400

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.66 cum
Cost for 1 cum.
Say
level precast reinforced cement concrete in vertical &
horizontal fins individually or forming box louvers setting in
cement mortar 1:2 (1 cement : 2 coarse sand), including the
cost of required centering, shuttering but excluding the cost
of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand

Details of cost for 4 RCC vertical fins 4m high at lm centre to
centre with two horizontal fins, all projecting 60cm from face
of wall and 5cm thick cubical contents = 0.66 cum
MATERIAL:
LABOUR:
delay etc.
0128 Mate day 0.0264
9999 Labour for hoisting, Transporting and setting L.S. 71.7600
9999 Sundries L.S. 17.9400
Total
TOTAL
TOTAL
TOTAL
Cost of 0.66 cum
Cost of 1 cum
Say
5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2

coarse sand(zone-III) : 4 graded stone aggregate 6mm
nominal size ), reinforced with 1.6 mm dia mild steel wire,
including centering and shuttering, roughening cleaning, fixing
and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc.
complete, excluding plastering of the jambs, sills and soffits.
5.18.1 50 mm thick
Details of cost for jali 2.00mx0.75m = 1.50 sqm.
0768 Cement Concrete Jali 50 mm thick sqm 1.5000
9999 Mortar for fixing L.S. 6.2400
9988 Carriage and sundries L.S. 6.2000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.50 sqm.
Cost of 1 sqm.
Say
5.18.2 40 mm thick
Details of cost for 1.2mx0.60m = 0.72 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.72 sqm.
Cost of 1 sqm.
Say
5.18.3 25 mm thick
Details of cost for jali 0.75mx0.5m = 0.375 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.375 sqm.
Cost of 1 sqm.
Say
5.19 Encasing rolled steel sections, in beams and columns, with

cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)
derived from natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources) including
centering and shuttering complete but , excluding cost of
reinforcement.

Consider 2 R.S. Joist (150mmx80mm) 4.88m long placed 30cm
apart centre to centre
Overall dimensions of the beam 43cmx20cm-
MATERIAL
Concrete work-
4.93x0.43x0.20 = 0.424 cum for 1:1½:3 Cement Concrete (1
cement: 1½ coarse sand : 3 stone aggregate 20mm nominal
size)
Extra labour for laying C.C. in RCC work
0128 Mate day 0.0170
Form work-
4.93x0.83 girth = 4.09 sqm.
5.9.5 Rate as per item 5.9.5 of SH: Reinforced cement concrete sqm 4.0900
work
9999 Sundries and for lifting materials L.S. 21.5800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.424 cum
Cost of 1 cum.
Say
5.19A Encasing rolled steel sections, in beams and columns, with

cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand including
Aggregate (RCA) up to 20%: 3 graded stone aggregate 20 mm
including centering and shuttering complete but excluding
cost of reinforcement.

Consider 2 R.S. Joists (150mmx80mm) 4.88m long placed
30cm apart centre to centre

Overall dimensions of the beam 43cmx20cm
MATERIAL:
Concrete work :4.93x0.43x0.20 = 0.424 cum
For 1:1.5:3 Cement Concrete (1 cement: 1½ coarse sand
(RCA) up to 20% : 3 stone aggregate 20mm nominal size
(RCA) up to 20%)
0128 Mate day 0.0170
Form work-4.93x0.83 girth = 4.09 sqm
5.9.5 Rate as per Item Number 5.9.5 of SH: Reinforced cement sqm 4.0900
concrete work
9999 Sundries and for lifting materials L.S. 21.5800
Total
TOTAL
TOTAL
TOTAL
Cost of 0.424 cum
Cost of 1 cum
Say
5.2 Encasing rolled steel section in grillages with cement concrete

1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from
size derived from natural sources) including centering and
shuttering but, excluding cost of expanded metal and hangers.

Details of cost for the grillage 3.50mx3.50mx1.00m = 12.25
cum
0128 Mate day 0.4900
Shuttering :
2(3.50+3.50)x1.00= 14.00 sqm
5.9.5 Rate as per item 5.9.5 of SH: Reinforced cement concrete sqm 14.0000
work
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 12.25 cum.
Cost of 1 cum.
Say
5.20A Encasing rolled steel section in grillages with cement concrete

Concrete Aggregate (RCA) up to 20%), including centering and
shuttering but excluding cost of expanded metal and hangers.

Details of cost for the grillage 3.50mx3.50mx1.00m
Cement concrete 1:1.5:3 3.50mx3.50x1.00=12.25cum
0128 Mate day 0.4900
Shuttering :2(3.50+3.50)x1.00= 14.00 sqm
concrete work
Total
TOTAL
TOTAL
TOTAL
Cost of 12.25 cum
Cost of 1 cum
Say
5.21 Extra for providing and fixing expanded metal mesh of size
20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing
3.64 kg per sqm for encasing of rolled steel sections in beams,
columns and grillages, excluding cost of hangers.

MATERIAL
Expended metal 20 mm x 60 mm and 1.6 mm thick = 10 sqm
Wastage 5% = 0.5 sqm

Total =10.50 sqm
1015 Mild steel expanded metal 20x60 mm strands sqm 10.5000
9977 Carriage of expended metal L.S. 13.5200
9999 Wire for tieing L.S. 13.5200
Cost of bending and placing in position
0102 Blacksmith 1st class day 0.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm.
Say
5.22 Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete
up to plinth level.
5.22.1 Mild steel and Medium Tensile steel bars

Details of cost for 1 quintal-
MATERIAL
Mild steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1004 Average rate of Mild steel round bars for reinforcements quintal 1.0500
2205 Carriage of Steel 1.05/10 = 0.105t tonne 0.1050

9999 Cover block L.S. 26.0000
LABOUR
For straightening, cutting, bending, binding and placing in
position-
9999 Sundries and binding wire L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22.2 Hard drawn steel wire

MATERIAL
Hard drawn steel wire = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1224 Hard drawn steel wire quintal 1.0500
2205 Carriage of Steel 1.05q = 0.105 tonne tonne 0.1050
LABOUR
For cutting and laying in position etc.-
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22.3 Cold twisted bars

MATERIAL
Deformed twisted steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05q
1005 Twisted steel / deformed bars quintal 1.0500
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22.4 Hot rolled deformed bars

Details of cost for 1 quintal- MATERIAL
Wastage 5% = 0.05 q
Total = 1.05q
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22.5 Hard drawn steel wire fabric

MATERIAL
Hard drawn steel wire fabric 100kg , 7.75kg
per sqm = 12.903 sqm.
Total =13.548 sqm
1021 Hard drawn steel wire fabric sqm 13.5480
2205 Carriage 1.05q = 0.105 tonne tonne 0.1050
LABOUR
For cutting and laying in position.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

MATERIAL
Wastage 5% = 0.05 q
Total =1.05q
2205 Carriage of steel 1.05/10 = 0.105t tonne 0.1050
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete
above plinth level.
5.22A.1 Mild steel and Medium Tensile steel bars

` Details of cost for 1 quintal-
MATERIAL
Mild steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1004 Average rate of Mild steel round bars for reinforcements quintal 1.0500
2205 Carriage of Steel NOS/ 10 = 0.105 t tonne 0.1050

LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A.2 Hard drawn steel wire

MATERIAL
Hard drawn steel wire = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1224 Hard drawn steel wire quintal 1.0500
2205 Carriage of Steel tonne 0.1050
LABOUR
For cutting and laying in position etc.-
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A.3 Cold twisted bars

Details of cost for 1 quintal- MATERIAL
Deformed twisted steel bars = 1.00 q Wastage 5% = 0.05 q
Total = 1.05q
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A.4 Hot rolled deformed bars

MATERIAL
Wastage 5% = 0.05 q
Total = 1.05q
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A.5 Hard drawn steel wire fabric

1021 Details of cost for 1 quintal-
MATERIAL
Hard drawn steel wire fabric 100kg,
7.75kg per sqm = 12.903 sqm.
Add 5% wastage
Total =13.548 sqm
LABOUR
For cutting and laying in position.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

MATERIAL
Wastage 5% = 0.05 q
Total =1.05q
LABOUR
position-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.22B Steel reinforcement for R.C.C. work ready to use "cut and
bend" rebars of approved make from factory/workshop to
construction site including placing in position and binding all
complete up to plinth level.
5.22B.1 Thermo-Mechanically Treated bars of grade Fe-500D or more.

MATERIAL
LABOUR
9999 For cut and bend L.S. 156.0000
For binding and placing in position
TOTAL
Add 1 % Water charges
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of one quintal
Cost of 1 Kg.
Say
5.22C Steel reinforcement for R.C.C. work ready to use "cut and
bend" rebars of approved make from factory/workshop to
construction site including placing in position and binding all
complete above plinth level.
5.22C.1 Thermo-Mechanically Treated bars of grade Fe-500D or more.

MATERIAL
LABOUR
9999 For cut and bend L.S. 156.0000
For binding and placing in position
TOTAL
Add 1 % Water charges
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of one quintal
Cost of 1 Kg.
Say
5.23 Smooth finishing of the exposed surface of R.C.C. work with 6

mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Details of cost for 10sqm. MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per item No 3.3 of SH: Mortars cum 0.0720
9999 Extra for removing burrs, cleaning with wire brushes pock L.S. 13.3900
marking with pointed tool etc. complete
9999 Scaffolding and Sundries L.S. 11.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
5.24 Extra for rendering smooth the top of suspended floors,

landings and staircases (treads and risers) with cement mortar
1:2 (1 cement : 2 coarse sand), including a floating coat of
neat cement and protecting the surface with a layer of 7.5 cm
of earth laid over 15 mm of fine sand in case of suspended
floor and bricks laid in mud mortar in case of same. landings
and steps, including subsequent removal and cleaning of the
same

MATERIAL
Cement mortar 1:2 (1 Cement :
2 Coarse sand)
LABOUR
9999 Spreading earth on floor (7.5mm thick) L.S. 35.4900
Spreading sand 15mm thick on floor
sand)
9999 Disposal of earth spread over floor protection L.S. 5.3300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
5.25 Providing and fixing in position copper plate as per design for
expansion joints.
Details of cost for 10.56 kg Considering 3.0 m length, width
250mm and 1.6 mm thick = 0.750 sqm copper plate.
Weight of copper plate @ 14.08 kg/m² = 10.56kg

0967 Copper plate kilogram 10.5600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.56 kg
Cost per kg.
Say
5.26 Providing and filling in position, blown bitumen in expansion

joints.
Details of cost for a joint of 300m length, 2.5cm width and
15cm depth = 1.125 cum
Cubical content of joint-
300x0.025x0.150=1.125 cum.
MATERIAL
Bitumen 85/25 @ 1050kg per cum.
1.125x1050kg = 1181.25kg
Add wastage @ 5% = 59.06 kg.
= 1240.31 = 1.240 tonne
0313 Blown type petroleum bitumen of penetration 85/25 of tonne 1.2400
approved quality
2211 Carriage of Tar/ bitumen tonne 1.2400
For heating of bitumen @ 2.0 quintal per tonne of bitumen.
1.240x2.0=2.48q=0.248t
2200 Carriage of steam coal tonne 0.2480
LABOUR
Labour for heating, mixing and filling-
9999 Sundries L.S. 121.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.125 cum
cost for 1.00cum
Say
5.27 Providing and filling in position bitumen mix filler of

proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25
cubic metre of coarse sand for expansion joints.

Details of cost for a joint of 300m length,2.5cm width and
15cm depth = 1.125 cum
Cubical content of joints-
300x0.150x0.025=1.125cum.
MATERIAL
Bitumen S-90 = 256.30 kg per cum.
256.30x1.125 = 288.34 kg.
Add for wastage @ 5% = 14.42 kg.
Total = 302.76 kg. or = 0.303 tonne.
for heating of bitumen @ 2.0 quintal per tonne of bitumen,
i.e.
0.303x2.0=0.606q
1/80x288.34=3.6 kg = 0.0036 Tonne
1/4th of the quantity of cement in kg = 3.6/4= 0.90 cum
LABOUR
Labour for heating and filling :
9999 Sundries L.S. 121.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.125 cum
cost for 1.00cum
Say
5.28 Providing and fixing in position 12mm thick bitumen

impregnated fibre board conforming to IS: 1838, including
cost of primer, sealing compound Grade-A in expansion joints.

Details of cost for joint 100m long 10cm deep = 10 sqm
MATERIAL
(i) Impregnated fibre board 1x100x0.075=7.5sqm
0339 Flame retardant face insulating, Impregnated fibre board 12 sqm 7.5000
mm thick
(ii) Primer 80m/litter 100m=100/80 x1=1.25 lit
0316 Bitumen solution primer of approved quality litre 1.2500
(iii) Sealing compound @ 3 m per litre for
100m = 100/3x1 =33.3 litres
Wastage @ 5% = 1.67
Total = 35.00 litre
(1 litre = 0.9 kg) = 35.00x0.9 = 31.5 kg
0314 Bitumen hot sealing compound : grade A kilogram 31.5000
9977 Carriage L.S. 26.9100
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100m long 10cm deep
Cost per cm depth per 100m long
Say
5.29 Providing and fixing sheet covering over expansion joints with
iron screws as per design.
5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.
5.29.1.1 150mm wide

Details of cost for 3m length
MATERIAL
0236 Non - Asbestos multi purpose fibre (high impact poly sqm 0.4700
propylene reinforced) cement board 6mm thick.
2273 Carriage of A.C.sheet and accessories tonne 0.0049
0.45sqm = 0.0049 tonne
9999 50mm iron screws with washer and rawl plugs L.S. 40.3000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3 metre
Cost per metre
Say
5.29.1.2 200mm wide

MATERIAL
0236 Non - Asbestos multi purpose fibre (high impact poly sqm 0.6300
propylene reinforced) cement board 6mm thick.
0.60sqm. = 0.0065 tonne
9999 50mm iron screws with washer and rawl plugs L.S. 53.8200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3 metre
Cost per metre
Say
5.29.2 Aluminium fluted strips 3.15 mm thick.

5.29.2.1 150 mm wide
Details of cost for 1 meter
MATERIAL
2391 Strips-Aluminium fluted 3.15mm thick and 150mm wide metre 1.0000
0639 Bright finished or black enamelled mild steel screws 25 mm 100 Nos 0.0600
9977 Carriage of materials L.S. 1.0400

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say
5.29.2.2 200 mm wide

MATERIAL
2392 Strips Aluminium fluted 3.15mm thick and 200mm wide metre 1.0000
metre

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say
5.29.3 Cement bonded wood particle board 6mm thick as per IS :

14276
5.29.3.1 150 mm wide
Details of cost for 3 metre
MATERIAL:
0242 Multi purpose cement bonded wood particle board 6 mm sqm 0.4700
thick
2273 Carriage of board and accessories tonne 0.0049
0.45sqm = 0.0049 tonne
9999 50mm iron screws with washer and rawl plugs L.S 40.3000
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3 metre
Cost of 1 metre
Say
5.29.3.2 200 mm wide
MATERIAL:
0242 Multi purpose cement bonded wood particle board 6 mm sqm 0.6300
thick
2273 Carriage of board and accessories tonne 0.0065
0.60sqm = 0.0065 tonne
9999 50mm iron screws with washer and rawl plugs L.S 53.8200
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3 metre
Cost of 1 metre
Say
5.3 Add for plaster drip course/ groove in plastered surface or

moulding to R.C.C. projections.
Details of cost for 30 metre long throating or plaster or
moulding-
LABOUR
9999 Add for materials (cement mortar etc.) L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 metre
Cost per metre
Say
5.31 Extra for laying reinforced cement concrete in or under water
and/ or liquid mud, including cost of pumping or bailing out
water and removing slush etc., complete.
Note For Item No. 5.31:- The quantity will be calculated by

multiplying the depth measured from the subsoil water level
up to the centre of gravity of the R.C.C. under subsoil water
with the quantity of R.C.C. in cubic metre executed under
subsoil water. The depth of centre of gravity shall be
reckoned correct to 0.1 m. 0.05 m or more shall be taken as
0.1 m and less than 0.05 m ignored. No extra payment shall
be made for placing reinforcement or centering & shuttering
under sub - soil water conditions.

Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
Analysis same as per item number 4.15
pumping hours = 3 hrs. or 0.375 day.
0011 Hire charges of Pump set of capacity 4000 litres/hour day 0.3750
for cleaning slush
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 14cum. per 0.30m depth
Say
5.32 Extra for laying reinforced cement concrete in or under foul

positions.
ANALYSIS SAME AS ITEM NO 4.16
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
5.33 Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete
work; using coarse aggregate and fine aggregate derived from
natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended
centering, shuttering, finishing and reinforcement as per
direction of the engineer-in-charge; for the following grades
of concrete.
the specified minimum cement content, the contractor shall
extra cement.
5.33.1 All works up to plinth level

kg /cum
MATERIAL
0.50% of cement
position
plant.
0009 Pumping charges of concrete including hire charges of pump, cum 1.0000
carriage charges for all leads, piping work & accessories etc.
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg/cum
MATERIAL
0.50% of cement
position
plant.
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg/cum
MATERIAL
0.50% of cement
position
plant.
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
5.33.2 All works above plinth level up to floor V level

kg /cum
0295 Details of cost for 1.00 cum
MATERIAL
0.50% of cement
position
plant.

9999 Sundries L.S. 13.0000
(Extra labour for lifting material up to floor V level : = 0.75 x
2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.
9999 Sundries L.S. 13.0000
2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.

9999 Sundries L.S. 13.0000
2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.

9999 Sundries L.S. 13.0000
2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say

kg /cum
MATERIAL
0.50% of cement
position
plant.

9999 Sundries L.S. 13.0000
2.5 = 1.88)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
5.33A Providing and laying in position ready mixed or site batched
design mix cement concrete for reinforced cement concrete
work; using coarse aggregate and fine aggregate derived from
natural sources and using recycled concrete aggregate (RCA)
as coarse aggregate and fine aggregate within permissible
utilization of 20% each, Portland Pozzolana /Ordinary
Portland/Portland Slag cement, admixtures in recommended
centering, shuttering, finishing and reinforcement as per
direction of the engineer-in-charge; for the following grades
of concrete.
the specified minimum cement content, the contractor shall
extra cement.
5.33A.1 All works up to plinth level

kg /cum
MATERIAL
0279 Recycled concrete aggregate (RCA) 20 mm nominal size cum 0.1140

2202 Carriage of Stone aggregate including recycled concrete
aggregate (RCA) below 40 mm nominal size cum 0.8500

0982 Coarse sand (zone III) derived from natural source cum 0.3400
0278 Manufactured sand derived from recycled concrete aggregate cum 0.0850

7318 Plasticizer / super plasticizer 0.50% of cement kilogram 1.6500
position
0004 Production cost of concrete by batch mix plant/ ready mixed cum 1.0000
plant
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
5.33A.2 All works above plinth level up to floor V level

kg /cum
MATERIAL

2202 Carriage of Stone aggregate including recycled concrete
aggregate (RCA) below 40 mm nominal size cum 0.8500

0982 Coarse sand (zone III) derived from natural source cum 0.3400
0278 Manufactured sand derived from recycled concrete aggregate cum 0.0850

7318 Plasticizer / super plasticizer 0.50% of cement kilogram 1.6500
position
0004 Production cost of concrete by batch mix plant/ ready mixed cum 1.0000
plant
LABOUR
9999 Sundries L.S. 13.0000
Extra labour for lifting up to floor five level
0.75 x 2.5 = 1.88
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per 1.00 cum
Say
5.35 Add for using extra cement in the items of design mix over
and above the specified cement content therein.
Details of cost for 1 quintal
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per quintal
Say
5.36 Providing and placing in position precast reinforced cement
concrete waffle units, square or rectangular, as per design and
shape for floors and roofs in 1:1½:3 (1 Cement : 1½ coarse
sand (zone-III) derived from natural sources : 3 graded stone
aggregate 10 mm nominal size derived from natural sources),
including flush or deep ruled pointing at joints in Cement
mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes
of required sizes for carrying through service lines etc.,
providing steel hooks for lifting etc, form work in precasting,
handling, hoisting, centering and erection complete for all
floor levels but, excluding the cost of reinforcement.

Consider a waffle 09. x 0.9 x 0.3m
Total area covered 4.548x3.636 = 16.54 sqm.
Cement concrete in 1 unit
Top 0.8x0.8x0.035 = 0.0224
Sides 2(0.8x0.265x0.0325) = 0.0138
2(0.735x0.265x0.0325) = 0.0127
Total = 0.0489
Flange 4x0.85x0.05x0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum.
5.2.2 Rate as per item no 5.2.2 of SH : RCC cum 1.3800
(i) Shuttering and centring
Face in contact
4x0.8x0.265 = 0.848
Inner 4x0.735x0.265 = 0.779
Top (inside) 1x0.735x0.735 = 0.540
Flange 4x0.9x0.035 = 0.126
Total = 2.293 sqm.
Quantity 20 such units 45.86 sqm.
Hooks for lifting
2x1.5 = 3.0m
4x0.01 = 0.04m
Total = 3.04m
@ 3kg per m-9.12Kg or 0.009 t = 9 kg
10.2 Rate as per item no 10.2 of SH : Steel work kg 9.0000
9988 (iii) 10mm dia. Bolts 60mm long with nuts and washers 2x2 = L.S. 13.0000
4 Nos. including carriage of bolts
9999 Sundries L.S. 79.9500
(iv) Transportation and erection labour for 20 units
0126 Mason (for ornamental stone work) 1st class day 1.0000
(v) Cost of pointing flush or deep ruled in cement mortar 1:2
(1 Cement : 2 fine sand)
13.35.1 Rate as per item no 13.35.1 of SH : Finishing sqm 16.5400
TOTAL
TOTAL
TOTAL
TOTAL
Total for 20 units
Cost for 1.38 cum.
Cost for 1 cum.
Say
5.36A Providing and placing in position precast reinforced cement

concrete waffle units, square or rectangular as per design and
shape for floors and roofs in 1:1.5:3 (1 cement : 1.5 coarse
sand including manufactured sand derived from Recycled
Concrete Aggregate (RCA) up to 20% : 3 graded stone
aggregate 10 mm nominal size Recycled Concrete Aggregate
(RCA) up to 20%), including flush or deep ruled pointing at
joints in cement mortar 1:2 (1 cement : 2 Fine sand), making
necessary holes of required sizes for carrying through service
lines etc., providing steel hooks for lifting etc, form work in
precasting, handling, hoisting, centering and erection
complete for all floor levels but excluding the cost of
reinforcement.

Consider a waffle 0.9 x 0.9 x 0.3m
Total area covered 4.548 x 3.636 = 16.54 sqm.
Cement concrete in 1unit
Top 0.8 x 0.8 x 0.035 = 0.0224
sides 2(0.8 x 0.265 x 0.0325) = 0.01382
(0.735 x 0.265 x 0.0325) = 0.0127
Total = 0.0489
Flange 4 x 0.85 x 0.05 x 0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum
5.2.2A Rate as per Item Number 5.2.2A of SH: Reinforced cement cum 1.3800
concrete work
(i) Shuttering and centring Face in contact 4 x 0.8 x 0.265 =
0.848 sqm., Inner 4 x 0.735 x 0.265 = 0.779 sqm., Top (inside)
1 x 0.735 x 0.735 = 0.540 sqm., Flange 4 x 0.9 x 0.035 = 0.126
sqm ., Total = 2.293 sqm. Quantity 20 such units 45.86 sqm
concrete work
Hooks for lifting
2 x 1.5 = 3.0 m
4 x 0.01 = 0.04 m = 3.04 m @ 3 kg per m 9.12 kg or 0.009 t
(ii) 10 mm dia. Bolts 60 mm long with nuts and washers 2 x 2 =
4Nos
10.2 Rate as per Item Number 10.2 of SH: Steel work kg 9.0000
9999 Including carriage of bolts L.S. 13.0000
9999 Sundries L.S. 79.9500
(iv) Transportation and erection labour for 20 units
0126 Mason (for ornamental stone work) 1 st class day 1.0000
(v) Cost of pointing flush or deep ruled in cement mortar 1:2
13.35.1 Rate as per Item Number 13.35.1 of SH: Finishing sqm 16.5400
Total
TOTAL
TOTAL
TOTAL
Cost of 1.38 cum
Cost of 1 cum
Say
5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for
each four floors or part thereof.
MATERIAL
0009 Pumping charges of concrete including Hire charges of pump, cum 1.0000
piping work & accessories etc
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
5.41 Supplying and applying pre tested and approved water based
concrete curing compound to concrete/ masonry surface, all
as per manufacturer’s specification and direction of Engineer-
in-charge.
5.41.1 Non pigmented wet curing compound

Detail of cost for 10.00 sqm (covering area 5 sqm/litre)
MATERIAL
0349 Curing compound litre 2.0000
9977 Carriage of material L.S. 1.0000
LABOUR
9999 Sundries, Brush L.S. 3.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
5.42 Providing and fixing parallel threaded couplers conforming to

IS code on “Reinforcement Couplers for Mechanical Splices of
Bars for Concrete Reinforcement - Specification”, to
reinforcement bars including threading, enlargement at
connection by forging, protecting the prepared reinforcement
bars and related operations as required to complete the
works per direction of Engineer- in-Charge.
5.42.1 Coupler for 16 mm diameter reinforcement bar

Detail of cost for 1 Nos
MATERIAL
2394 Coupler 16 mm dia each 1.0000
LABOUR
9999 For placing in position and fixing L.S. 3.7700
9999 Tapered/Parallel threading charges L.S. 17.7700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
5.43 Providing and fixing in position Stainless steel Grade 304

plate-1.0 mm thick as per design for expansion joints.
5.43.1 200 mm wide.

Detail of cost for 1 metre
MATERIAL
2393 1 mm thick Stainless Steel Cover plate grade 304 kg 1.6000
8647 Stainless steal screws 30mm x4mm. 100 nos 0.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre
Say
5.43.2 300 mm wide.

MATERIAL
2393 1 mm thick Stainless Steel Cover plate grade 304 kg 2.4000
8647 Stainless steal screws 30mm x4mm. 100 nos 0.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre
Say
5.44 Providing and fixing of expansion joint system related with
floor location as per drawings and direction of Engineer-In-
Charge. The joints system will be of extruded aluminium base
members, self aligning / self centering arrangement and
support plates etc. as per ASTM B221-02. The system shall be
such that it provides floor to floor /floor to wall expansion
control system for various vertical location in load application
areas that accommodates multi directional seismic movement
without stress to it's components. System shall consist of
metal profiles with a universal aluminium base member
designed to accommodate various project conditions and
finish floor treatments. The cover plate shall be designed of
width and thickness required to satisfy projects movement
and loading requirements and secured to base members by
utilizing manufacturer’s pre-engineered self- centering
arrangement that freely rotates / moves in all directions. The
Self - centering arrangement shall exhibit circular sphere ends
that lock and slide inside the corresponding aluminium
extrusion cavity to allow freedom of movement and flexure in
all directions including vertical displacement. Provision of
Moisture Barrier Membrane in the Joint System to have
watertight joint is mandatory requirement all as per the
manufactures design and as approved by Engineer -in-Charge.
(Material shall confirm to ASTM 6063).
5.44.1 Floor Joint of 100 mm gap

Details of Cost of 1 metre.
MATERIALS :
2403 Floor Joint of 100 mm metre 1.0000
2402 Epoxy adhesive kg 4.2500
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say
MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say

MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say
5.45 Providing and fixing of expansion joint system related with
wall joint (internal/external) location as per drawings and
direction of Engineer-In- Charge. The joints shall be of
extruded aluminium base members, self aligning / centering
arrangement and support plates as per ASTM B221- 02. The
material shall be such that it provides an Expansion Joints
System suitable for vertical wall to wall/ wall to corner
application, both new and existing construction in office
Buildings & complexes with no slipping down tendency
amongst the components of the Joint System. The Joint
System shall utilize light weight aluminium profiles exhibiting
minimal exposed aluminium surfaces mechanically snap
locking the multicellular to facilitate movement. (Material
shall confirm to ASTM 6063).
5.45.1 Wall Joint of 100 mm gap

MATERIALS :
2409 Wall Joint of 100 mm metre 1.0000
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say

MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say

MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say
5.46 Providing and fixing of expansion joint system of approved
make and manufactures for various roof locations as per
approved drawings and direction of Engineer-In-Charge. The
joints shall be of extruded aluminium base members with, self
aligning and self centering arrangement support plates asper
ASTM B221-02. The system shall be such that it provides
watertight roof to roof/roof to corner joint cover expansion
control system that is capable of accommodating
multidirectional seismic movement without stress to its
components. System shall consist of metal profile that
incorporates a universal aluminium base member designed to
accommodate various project conditions and roof treatments.
The cover plate shall be designed of width and thickness
required to satisfy movement and loading requirements and
secured to base members by utilizing manufacturer’s pre-
engineered self-centering arrangement that freely rotates /
moves in all directions. The Self centering arrangement shall
exhibit circular sphere ends that lock and slide inside the
corresponding aluminium extrusion cavity to allow freedom of
movement and flexure in all directions including vertical
displacement. The Joint System shall resists damage or
deterioration from the impact of falling ice, exposure to UV,
airborne contaminants and occasional foot traffic from
maintenance personnel. Provision of Moisture Barrier
Membrane in the Joint System to have water tight joint is
mandatory requirement. (Material shall confirm to ASTM
6063).
5.46.1 Roof Joint of 100 mm gap

MATERIALS :
2399 Complete Roof Joint of 100 mm metre 1.0000
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say
MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say

MATERIALS :
9977 Carriage L.S. 124.9000
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre.
Say
5.47 Providing and fixing in position factory made precast RCC M-
40 fixing with hold fast embedded in 1:3:6 concrete block for
doors and windows frames having excellent smooth finish as
per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars
tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6
numbers high strength polymer blocks of required size for
fixing hinges including providing 6 no specially designed M.S.
galvanised sleeves for accommodating 6 mm dia fully
threaded bolts for fixing hold fast on vertical members,
providing suitable arrangement for receiving sliding door bolts
and tower bolt etc. all complete, as per the direction of
Engineer-in-charge. The frame shall be measured in running
metre correct to two places of decimal.
5.47.1 Door frame 125 mmx 60 mm

Details of cost for 5.20 metre.
MATERIAL
5.33.1.4 Rate as per Item No.5.33.1.4 of SH: REINFORCED CEMENT cum 0.0390
CONCRETE
Extra for scatter and smaller work @25 % i.e. Px0.25
1005 Twisted steel/ deformed bars quintal 0.0468
0596 Bright finished or black enamelled mild steel butt hinges
75x47x1.70 mm 10 Nos 0.6000

4.3.3 Rate as per Item No.4.3.3 of SH: CONCRETE WORK sqm 1.2700
14.2.1 Rate as per Item No.14.2.1 of SH: REPAIRS TO BUILDINGS each 1.0000
13.48.2 Rate as per Item No.13.48.2 of SH. FINISHING sqm 1.2700

9999 Sundries L.S. 100.6700
TOTAL
Add 1 % Water charges on "W-A-P-R"
TOTAL
Add GST on "X-A-P-R" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y-A-P-R"
TOTAL
Add Cess @ 1% on "Z-A-P-R"
Cost of 5.20 metre
Cost of 1 metre
Say
5.47.2 Door frame 100 mmx 60 mm

MATERIAL
CONCRETE
75x47x1.70 mm 10 Nos 0.6000


9999 Sundries L.S. 100.6700
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say
5.47.3 Door frame 85 mmx60 mm

MATERIAL
CONCRETE
0596 Bright finished or black enamelled mild steel butt hinges 10 Nos 0.6000
75x47x1.70 mm

9999 Sundries L.S. 100.6700
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say
5.48 Providing and laying Reinforced cement concrete for

construction of piers, abutments, portal frames, pier caps and
bearing pedestals and seismic arresters over pier/ abutment
caps at all locations with specified grade using Ordinary
Portland Cement (conforming to strength requirement of
IS:8112) including the cost of steel centering and shuttering
etc. complete, including testing of materials etc. for casting
pier & pier cap in one/two stage, necessary tools, plants,
machinery and all related operations as required to complete
the work as per drawings and Specifications with all leads, lifts
and depths true to level and position but excluding the cost of
providing reinforcement. Reinforcement shall be measured
and paid separately.
Note:- Cement content considered in this item is 480 Kg./

Cum. Excess/ less cement used as per design mix is payable/
recoverable separately.
5.48.1 Reinforced Cement Concrete -M-50

Detail of cost for 120 cum.
MATERIAL
5.48X Sub Analysis no 5.48Y (Annexure) for item 5.48.1 each each
Providing M 60 grade reinforced Cement Concrete data (lot)
for 120.00 cum
Add 11 per cent of cost of material, labour and machinery for
formwork on P
Add 1.4 per cent of cost of material, Labour and machinery
excluding formwork to cater for extra lift on P
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 120 cum
Cost of 1 cum
Say
5.48.2 Reinforced Cement Concrete -M-60

MATERIAL
5.48Y Sub Analysis no 5.48Y (Annexure) for item 5.48.2 each 1.0000
for 120.00 cum
formwork on P
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 120 cum
Cost of 1 cum
Say
5.48.3 Extra for using M-50/ M-60 Grade Self-compacting Cement

Concrete
MATERIAL
5.48X Sub Analysis no 5.48 (Annexure) for sub analysis 5.48.3X each 1.0000
5.48.2 Rate as per Item No.5.48.2 of SH: REINFORCED CEMENT cum -1.0000
CONCRETE
TOTAL
Cost of 1 cum
Say
5.48.3X M 60 grade Self-compacting Reinforced Cement Concrete

MATERIAL
5.48Z Sub Analysis no 5.48Y (Annexure) for item 5.48.2 each 1.0000
for 120.00 cum
formwork on P
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 120 cum
Cost of 1 cum
Say
5.48X
Annexure for item 5.48.1, Providing M50 grade Reinforced
Cement Concrete data for 120.00 cum
Sub Analysis for use in Item no 5.48.1
Details of cost for each lot of 120 cum.
RCC Grade M50
Unit = 1 cum
Taking output = 120 cum
MATERIALS :
LABOUR :
0128 Mate day 0.9400
0114 Beldar day 20.0000
MACHINERY :
0066 Batching and Mixing Plant @ 75 cum per hour hour 1.6000
0070 Generator 100 KVA/125 KVA hour 1.6000
0052 Front end loader 1 cum bucket capacity (incl POL) hour 1.6000
Distance = 10 km
0029 Qty= 120.00 cum
Total = 120.00x 10= 1200
Carriage of concrete by transit mixer km/cum 1200.0000
piping work & accessories etc.
TOTAL
Cost of each lot of 120 cum.
Say
5.48Y
Annexure for items 5.48.2 for using M 60 grade Self
Compacting Reinforced cement concrete data for
120.00 cum
Sub Analysis for use in Item no 5.48.2
Detail of cost for each
RCC Grade M60
Unit = 1 cum
Taking output = 120 cum
MATERIALS :
8953 Micro Silica kg 3600.0000
LABOUR :
0128 Mate day 0.9400
0114 Beldar day 20.0000
MACHINERY :
0066 Batching and Mixing Plant @ 75 cum per hour 1.6000
Distance = 10 km
Qty= 120.00 cum
Total = 120.00x 10= 1200
0029 Carriage of concrete by transit mixer km/cum 1200.0000
TOTAL
Cost of each.
Say
5.48Z
Annexure for items 5.48.3. Extra for using M 60 grade Self
Compacting Reinforced cement concrete data
for 120.00 cum
Sub Analysis for use in Item no 5.48.3X
Details of cost for each.
RCC Grade M60 self compacting concrete Using Batching
Plant, Transit Mixer and Concrete Pump

Unit = 1 cum
Taking Output = 120 cum
MATERIALS :
8953 Micro Silica kg 5040.0000
LABOUR :
0128 Mate day 0.8400
0114 Beldar day 18.0000
MACHINERY :
0066 Batching and Mixing Plant @ 75 cum per hour hour 1.6000
Distance = 10 km
Qty= 120.00 cum
Total = 120.00x 10= 1200
0029 Carriage of concrete by transit mixer km/cum 1200.0000
TOTAL
Cost of each
Say
5.49 Constructing cast-in situ RCC diaphragm wall by providing and

laying machine batched, machine mixed, self compacting,
ready mix reinforced cement concrete, tremie controlled, of
M 30 grade using minimum 400 kg cement per cum of
concrete including providing and mixing required admixtures
in recommended proportions as per IS : 9103, as approved by
the Engineer-in-charge, for achieving 150- 200mm slump, for
diaphragm wall having thickness as per approved structural
design not exceeding 600 mm, in panels of required depth
and lengths as per approved drawing, including constructing
necessary guide walls as required and as specified including
boring in all kinds of soils and rocks, including working in or
under water and / or liquid mud, in foul conditions and
pumping or bailing out of water and removing slush, including
disposal of earth/ rock / slush etc. for all leads and all lifts,
including preparing, providing and re-circulating bentonite
slurry in the trench as and when required for all depths,
including agitating bentonite slurry during trenching etc.,
providing and fixing stop ends or form tubes, up to the
required depth of diaphragm wall including extracting the
same after casting, including chipping off the bentonite
adulterated concrete or unsound concrete up to the cut off
level for obtaining the sound concrete, dressing undulations
on the exposed face of diaphragm wall after excavation by
chipping / chiselling etc. including filling the depression/
cavities with sound concrete etc. complete and as directed by
the Engineer-in-charge, including providing recess for bearing
plates and fixing insert boxes for inclined rock anchors etc.
complete as per the specifications and approved design and
as directed by the Engineer-in-charge, but excluding the cost
of reinforcement and inserts. (rates include cost of all inputs
of labour, material and T & P, cost of handling, lifting &
placing in position the reinforcement cage in the trench,
including the additional cost of welding the reinforcement
bars etc. involved in the work and all other incidental
expenditure for completing the work as directed by the
Engineer-in-charge), However, the actual area of the
Excess/less cement used for design mix including the extra
cement required for under water concreting is payable /

Analysis for 20x12=240 Sqmt area of diaphragm wall
Average depth 12 m
Thickness 0.60 m
Total Quantity 20 mx12 m x0.6 m = 144.00 cum
0082 Excavation of Diaphragm wall by Mechanical Grab sqm 240.0000
Guide wall RCC 1:2:4
RCC 2x20x(0.45+1.5)x.15 = 11.70 cum
5.1.3 Rate as per Item No.5.1.3 of SH: REINFORCED CEMENT cum 11.7000
CONCRETE
Reinforcement@ 70 kg/Cum for guide wall= 11.70x 70 kg/cum= 819 kg
5.22.6 Rate as per Item No.5.22.6 of SH: REINFORCED CEMENT kilogram 819.0000
CONCRETE
Add for chipping/dismantling top 50 cm contaminated
concrete
=20 x 0.50 x 0.60= 6.00 cum
RMC M-30 as per qty=144.00 cum
Add 10% extra for bulges etc. i.e. 14.40 cum
Total=144.00+6.00+14.40= 164.40 cum
CONCRETE
Bentonite @6% of RCC qty
Total Qty= 164.4x06x1400/100= 13810 kg= 13.81 tonne
7183 Bentonite tonne 13.8100
Add 10 %extra cement due to concreting under water
164.4x420x0.10=6.90 tonne
Add cement for grouting of wall using nozzles etc.- 240 sqm @
0.10 quintal/sqm =2.40 tonne
0025 Hire and running charges of light crane day 1.0000
Reinforcement @220 kg/cum
164.4x220kg/cum=36168 kg
Extra reinforcement for hooks @ 5% of cage 1808.4 kg
Total=1808.4 kg=18.084 qtl
Extra for welding reinforcement cage
Reinforcement @ 200 C/C 2 x 101 x 61 = 6161 joints
Welding for alternate joint say 50 % joints 6161 cm
10.22 Rate as per Item No.10.22 of SH: STEEL WORK cm 6161.0000
9999 Labour for grouting diaphragm wall under pressure i/c fixing L.S. 23530.0000
nozzle etc
Add for use retarders / plasticizers for the diaphragm wall
concreting using trimme @ 0.4 % cement qty = (164.4 x 420 x
0.4)/100=276.1

8954 Stop end tubes for diaphragm wall 600 mm dia. sqm 240.0000
8955 Driving end tubes for diaphragm wall 600 mm dia. sqm 240.0000
0026 Hire and running charges of bentonite pump day 2.0000
Bentonite powder @ 6% of R.C.C. Qty
= (164.4 Cum x 0.06)=9.864 cum
9.864 cum x 1400 kg/cum = 13809.6 kg
Disposal of bentonite muck
Slurry / Muck vol. 49.32 cum
Disposal of bentonite muck
Slurry / Muck vol. 49.32 cum
Add excavated earth = 144.00 cum
Total= 144.00 + 49.32 = 193.32 cum
15.60 Rate as per Item No.15.60 of SH: DISMANTLING & cum 193.3200
DEMOLISHING
Disposal of Chipping / Dismantling of contaminated concrete
and guide wall etc. with all leads as per item no. 15.3 =
2x(20x0.50x0.60) + 15.00 cum = 20.40 cum

15.3 Rate as per Item No.15.3 of SH: DISMANTLING & cum 20.4000
DEMOLISHING
9999 Sundries (Extra for concreting by Trimme) L.S. 1177.0000
9999 Sundries ( Design Charges) L.S. 19200.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 144.0 cum
Cost of 1 cum
Say
6.1 Brick work with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

MATERIAL
2602 Common burnt clay F.P.S. (non modular) bricks class 1000 Nos 0.4940
designation 7.5
2201 Carriage of Bricks 1000 Nos 0.4940
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per item No 3.9 of SH: Mortar cum 0.2500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

MATERIAL
designation 7.5
Cement mortar 1 : 6 (1 cement : 6 coarse sand) (Rate as per
item No 3.11)
3.11 Rate as per Item No.3.11 of SH: Mortar cum 0.2500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.2 Brick work with common burnt clay modular bricks of class
designation 7.5 in foundation and plinth in:
MATERIAL
7900 Modular common burnt clay bricks of class designation 7.5 1000 Nos 0.4870

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.2.2 Cement Mortar 1:6 (1 cement : 6 coarse sand).

MATERIAL

Cement mortar 1:6 (1 cement : 6 coarse sand)
Sundries L.S 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.3 Brick work with common burnt clay machine moulded

perforated bricks of class designation 12.5 conforming to IS:
2222 in superstructure above plinth level up to floor five level
in cement mortar 1:6 (1 cement : 6 coarse sand) :
6.3.1 With F.P.S.(non modular) bricks

MATERIAL
7901 Machine moulded perforated common burnt clay FPS (non 1000 Nos 0.4940
modular) bricks of class designation 12.5

LABOUR
Extra labour element required for lifting of materials (above
floor two level up to floor five level)
TOTAL
Add 1 % Water charges on "W" 60.02
TOTAL 6062.25 X
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.3.2 With Modular bricks

7902 Details of cost for 1 cum
MATERIAL
7902 Machine moulded common burnt clay modular perforated 1000 Nos 0.4870
bricks of class designation 12.5
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.4 Brick work with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in superstructure above plinth
level up to floor V level in all shapes and sizes in :

MATERIAL
designation 7.5
4 Rate as per Item Number 3.9 of SH: Mortars cum 0.2500
LABOUR
0124 Mason (brick layer) 2nd class 0.4700
floor two level up to floor five level)"
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

2602 Details of cost for 1 cum
MATERIAL
Common burnt clay F.P.S. (non modular) bricks class 1000 Nos 0.4940
designation 7.5
Cement mortar 1 : 6
3.11 Rate as per Item Number 3.11 of SH: Mortars cum 0.2500
LABOUR
0124 Mason (brick layer) 2nd class 0.4700
floor two level up to floor five level)"
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.5 Extra for brick work / AAC block masonry / Tile brick masonry
in superstructure above floor V level, for each four floors or
part thereof by mechanical means.

Details of cost for 5.3 cum per four floors .
0037 Mobile crane day 0.1250
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.3 Cum.
Cost for 1 cum
Say
6.6 Extra for Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls
with necessary weep and vent holes including use of cores
and cost of providing and fixing bitumastic coated M .S. ties
300 mm long of 25x3 mm section at not less than 3 ties per
sqm as per approved design.

MATERIAL
Mild steel 25mmx3mm section 30cm long 30 No. = 9 metres
@ 0.6kg/m = 5.40 kg
1008 Flats up to 10 mm in thickness quintal 0.0540
9999 Painting the steel Bitumen L.S. 13.5200
Extra labour for keeping cavity clear and fixing wall ties and
delay caused:
9999 Add for use of Core L.S. 4.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.7 Providing half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in cement
mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for
closing cavity 5 to 7.5 cm wide in cavity wall complete with
10cm / 11.4 cm wide bitumen felt type 3 grade 1.

MATERIAL
Half brick masonry 1:3 (Average)
1x10x0.27 = 2.7
6.12.1 Rate as per item No. 6.12.1 of SH: Brick Work sqm 2.7000
Bitumen felt type- 3 grade 1
1x10mx11.4m = 1.14 sqm.
Add for wastage and overlapping @ 5% = 0.06 sqm.
Total = 1.20 sqm
0322 Bitumen felt :Type 3 grade 1 sqm 1.2000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost for 1 metre
Say
6.8 Brick work 7 cm thick with common burnt clay F.P.S. (non
modular) brick of class designation 7.5 in cement mortar 1:3
(1 cement : 3 coarse sand) in superstructure above plinth level
and up to floor five

Details of cost for 10sqm
MATERIAL
designation
Cement mortar 1:3
LABOUR
Sundries and scaffolding L.S. 7.15 2.12 15.16 L.s 7.1500
Extra labour for lifting of material (above floor two level up to
floor five level)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.9 Brick work in plain arches in superstructure above plinth level

and up to floor five level including centering and shuttering
complete for span up to 6 metres with common burnt clay
F.P.S. (non modular) bricks of class designation 7.5 in cement
mortar 1:3 (1 cement : 3 coarse sand).

MATERIAL
designation 7.5
Cement mortar 1:3
Taking a semi circular arch 3.6m span,
3.6m long and 0.40m thick
Area of centering = 3.142 x 1.8 x 3.6 = 20.37 sqm.
Brick work in Arch = 3.142x2.00x0.4x3.6 = 9.05cum.
Area per cum = 20.37/9.05 = 2.25 sqm
5.9.9 Rate as per item no 5.9.9 of SH : Reinforced cement concrete sqm 2.2500
work
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.1 Brick work in gauged arches in superstructure above plinth

level and up to floor five level in cement mortar 1:3 (1 cement
: 3 coarse sand) including centering and shuttering complete,
for span up to 6 meters with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5.

designation 7.5
Cement mortar 1:3
4 Rate as per Item Number 3.8 of SH: Mortars cum 0.2500
Carriage of Bricks 1000 Nos 0.5380
Centring and shuttering (Area same as in item No. 6.9)
work
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.11 Extra for additional cost of centering for arches exceeding 6m

span including all shuttering, bolting, wedging and removal
(Area of the soffit to be measured).

MATERIAL
Centering and shuttering for arches and
carved surface exceeding 6m in span
(an average of 8m)
Radius R = 5m
2R-2=4+4
tan -¹ (4/3)=53.28°
2x53.28°=106°
Surface area =2x22/7x5x3.6x106/360=33.3sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Total = 7.103cum.
Qty taken as 1/8th of qty for cost of using once = 7.103/8 =
0.8885 cum (887.90 cudm)
Fittings:
32 no. @0.50cm each = 16m
Straps-50mmx10mm = 8 Nos. @0.25cm
each = 2m
Total = 18m @ 3.9kg/m = 70.2 kg. = 0.702qtl.
Qty taken l/8th of qty for cost using once = 0.702/8 = 0.0878
qtl
Bolts 160 Nos. 254 mm long 16mm dia.-
160x 0.254x 1.58=64.21 kg=0.64qtl.
Qty taken 1/8th of qty for cost using once = 0.64/8 = 0.08 qtl
1034 1034 Bolts and nuts up to 300 mm in length quintal 0.0800

Carriage of steel = 0.1342 t
Qty taken 1/8th of qty for cost using once = 0.1342/8 = 0.0168
tonne
LABOUR
0114 Beldar day 24.0000
9999 Sundries L.S. 134.5500
Less Cost of shuttering etc. for an arch up to 6 m span i.e. for
an average of 8 m span
5.9.9 Rate as per item no 5.9.9 of SH : Reinforced cement concrete sqm -33.3100
work
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 33.31sqm.
Cost per sqm
Say
6.12 Half brick masonry with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in foundations and
plinth in :

MATERIAL
designation 7.5
Cement mortar 1:3
3.8 Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per cum 0.2800
item No 3.8)
9999 Sundries & Scaffolding L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand)

MATERIAL
designation 7.5
Cement mortar 1 : 4
3.9 Cement mortar 1 : 4 (1 cement : 4 coarse sand) (Rate as per cum 0.2800
item No 3.9)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.13 Half brick masonry with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in superstructure
above plinth level up to floor V level.
6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)

2602 Details of cost for 10 sqm.
MATERIAL
designation 7.5
Cement mortar 1:3
LABOUR
Extra labour for lifting materials:
10 x 0.115 x1.13
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

MATERIAL
designation 7.5
Cement mortar 1:4
LABOUR
10 x 0.115 x 1.13
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.14 Extra for half brick masonry in superstructure, above floor V

level for every four floors or part thereof by mechanical
means.
Details of cost for 59.83 sqm per four floors .
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 59.83 sqm.
Cost for 1 sqm
Say
6.15 Extra for providing and placing in position 2 Nos 6mm dia.
M.S. bars at every third course of half brick masonry.

6mm dia. M.S. bars (round) 2 Nos. @ 30 meter/10sqm. = 60
metre @ 0.22kg/m = 13.2 kg
1002 Mild steel round bar 6 mm dia quintal 0.1320
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of10.00 sqm.
Cost for 1 sqm
Say
6.16 Tile brick masonry with common burnt clay F.P.S. (non
modular) tile bricks of class designation 10 in foundation and
plinth in:

MATERIAL
1984 Common burnt clay F.P.S. (non modular) tile bricks class 1000 Nos 0.7770
designation 10
Cement mortar 1 : 4
2207 Carriage of Brick tiles 1000 Nos 0.7770
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say

MATERIAL
1984 Common burnt clay F.P.S. (non modular) tile bricks class 1000 Nos 0.7770
designation 10
Cement mortar 1 : 6
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
6.17 Tile brick masonry with common burnt clay machine moulded
tile bricks of class designation 12.5 conforming to IS : 2690
(Part I) in foundation and plinth in cement mortar 1:6 (1
cement : 6 coarse sand).
Description Unit Quantity
MATERIAL
7904 Machine moulded common burnt clay tile bricks of class 1000 Nos 0.7770
designation 12.5
Cement mortar 1 : 6
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
modular) tile bricks of class designation 10 in superstructure
above plinth level up to floor V level in cement mortar 1:6 (1

MATERIAL
1984 Common burnt clay F.P.S. (non modular) bricks tile class 1000 Nos 0.7770
designation 10
Cement mortar 1 : 6
LABOUR
Extra labour for lifting of materials
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z" `
Cost of 1 Cum.
Say
modular) tile bricks of class designation 10 in plain arch work
in superstructure above plinth and up to floor five level in
cement mortar 1:4 (1 cement : 4 coarse sand) including
centering and shuttering complete.
Code Unit Quantity

MATERIAL
designation 10
Cement mortar 1 : 4
Centering and shuttering, area same as in item no. 6.9
work
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
modular) tile bricks of class designation 10 in gauged arch
work in superstructure above plinth and up to floor five level
in cement mortar 1:4 (1 cement : 4 coarse sand) including
centering and shuttering complete.

MATERIAL
designation 10

Cement mortar 1 : 4
9999 Sundries and shuttering L.S. 5.4600
Centering and shuttering, area same as in item no. 6.9
work
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.22 Tile brick masonry work 5 cm thick with common burnt clay
F.P.S. (non modular) tile bricks of class designation 10 in
cement mortar 1:3 (1 cement : 3 coarse sand) in
superstructure above plinth and up to floor five level.

MATERIAL
designation 10
Cement mortar 1:3
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
6.23 Honey-comb brick work 10 / 11.4 cm thick with common

burnt clay bricks of class designation 7.5 in super structure
above plinth level up to floor V level with cement mortar 1:4
(1 cement : 4 coarse sand).

Details of cost for 1sqm. of Honey comb
brick works-
MATERIAL
Brick work, with bricks of class designation 75, in cement
mortar 1:4 (1 Cement : 4 Coarse sand) in superstructure
1 m x 1 x 0.143 m x 4.5/7.5 = 0.069 cum

6.4.1 Rate as per item No 6.4.1 of SH :- Brick work. cum 0.0690
9999 Extra for delay due to fine work L.S. 20.6700
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 Sqm.
Cost per sqm.
Say
6.24 Extra for laying brick work in or under water and/or liquid
mud including cost of pumping or bailing out water and
removing slush etc. complete.
NOTE :- The quantity will be calculated by multiplying the

depth measured from sub - soil water level up to the centre of
gravity of brick work under sub - soil water with the quantity
of brick work in cum. executed under the sub - soil water. The
depth of centre of gravity shall be reckoned correct to 0.1 m,
0.05 m or more shall be taken as 0.1 m and less than 0.05 m
ignored.

0011 Details of cost for depth of water 0.30m depth.
pumping hours = 3 hrs. on 0.375 day.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
6.25 Extra for laying brick work in or under foul position.

Code Unit Quantity
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
6.26 Brick work with common burnt clay selected F.P.S. (non
modular) bricks of class designation 7.5 in exposed brick work
including making horizontal and vertical grooves 10 mm wide
12 mm deep complete in cement mortar 1:6 (1 cement : 6
coarse sand)
6.26.1 From ground level up to plinth level

MATERIAL
designation 7.5
9999 Sundries including steel/wooden strips for making grooves. L.S. 16.3800
LABOUR
For selection of bricks
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
6.26.2 Above plinth level up to floor V level

MATERIAL
designation 7.5
LABOUR
For selection of bricks
floor five level)
9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
6.27 Brick work with common burnt clay modular bricks of class
designation 7.5 in exposed brick work including making
horizontal and vertical grooves 10mm wide 12 mm deep
complete in cement mortar 1:6 (1 cement : 6 coarse sand).

MATERIAL

9999 Sundries i/c steel / wooden strips for making grooves L.S. 16.3800
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

MATERIAL

LABOUR
floor five level)
9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

modular bricks of class designation 12.5 in exposed brick work
including making horizontal and vertical grooves 10 mm wide
12 mm deep complete in cement mortar 1:6 (1 cement : 6
coarse sand).

MATERIAL
1986 Common burnt clay modular bricks class designation 12.5 1000 Nos 0.4870

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

MATERIAL
1986 Common burnt clay modular bricks class designation 12.5 1000 Nos 0.4870

LABOUR
floor five level)
9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.29 Brick work with common burnt clay machine moulded F.P.S.
(non modular) bricks of class designation 12.5 in exposed
brick work including making horizontal and vertical grooves 10
mm wide 12 mm deep complete in cement mortar 1:6 (1

Code Unit Quantity
MATERIAL
7903 Machine moulded common burnt clay FPS (non modular) 1000 Nos 0.4940
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

Code Unit Quantity
MATERIAL
7903 Machine moulded common burnt clay FPS (non modular) 1000 Nos 0.4940
LABOUR
floor five level)

9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

perforated F.P.S. (non modular) bricks of class designation
12.5 conforming IS : 2222 in exposed brick work including
making horizontal and vertical grooves 10mm wide 12 mm
deep complete in cement mortar 1:6 (1 cement : 6 coarse
sand).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
MATERIAL
LABOUR
floor five level)
9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

perforated modular bricks of class designation 12.5
conforming to IS : 2222 in exposed brick work including
making horizontal and vertical grooves 10 mm wide 12mm
deep complete in cement mortar 1:6 (1 cement : 6 coarse
sand).

MATERIAL
3.11 Cement mortar 1 : 6 (1 cement : 6 coarse sand) (Rate as per cum 0.2200
item No 3.11)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

MATERIAL
LABOUR
floor five level)
9999 Sundries L.S. 22.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.32 Brick work with clay fly ash F.P.S. (non modular) brick of class
designation 7.5 in superstructure above plinth level up to
floor five level in :
MATERIAL
7008 F.P.S.(non modular) clay fly ash bricks class designation 7.5 1000 Nos 0.4940

LABOUR
Extra labour element required for lifting of materials above
floor
two level up to floor V level (0.75 x 1.5 = 1.13)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say

MATERIAL
7008 F.P.S.(non modular) clay fly ash bricks class designation 7.5 1000 Nos 0.4940

LABOUR
floor
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.34 Brick work with non modular fly ash bricks conforming to
IS:12894, class designation 10 average compressive strength
in super structure above plinth level up to floor V level in :

MATERIAL
7737 Fly ash bricks conforming to I.S. 12894 1000 Nos 0.4870
LABOUR
floor
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand)
MATERIAL
LABOUR
floor two level up to floor V level
(0.75 x 1.5 = 1.13)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.35 Brick work with modular calcium silicate bricks machine

moulded conforming to IS:4139, class designation 10 average
compressive strength in super structure above plinth level up
to floor V level in :

MATERIAL
7738 Calcium Silicate Bricks machine moulded confirming to I.S. 1000 Nos 0.4870
4139 - 1989
3.9 Rate as per Item Number 3. 9 of SH: Mortars cum 0.2200
LABOUR
(0.75 x 1.5 = 1.13)
Coolie day 1.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.35.2 Cement mortar 1:6 (1 cement : 6 Coarse sand)

MATERIAL
7738 Calcium Silicate Bricks machine moulded confirming to I.S. 1000 Nos 0.4870
4139 - 1989
LABOUR
(0.75 x 1.5 = 1.13)
Coolie day 1.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.36 Brick work with modular extruded brunt fly ash clay sewer
bricks (Conforming to IS: 4885 ) in cement mortar 1:4 (1
cement : 4 coarse sand) in foundation and plinth :
6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand)

MATERIAL
7736 Extruded burnt fly ash clay sewer bricks conforming to I.S 1000 Nos 0.4870
4885 - 1988
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
6.37 Brick work with modular extruded brunt fly ash clay sewer
bricks (conforming to IS : 4885) in arches in foundation and
plinth in cement mortar 1:3 ( 1 cement : 3 fine sand).

MATERIAL
7736 Extruded burnt fly ash clay sewer bricks conforming to I.S 1000 Nos 0.4870
4885 - 1988
work
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.38 Providing and laying autoclaved aerated cement blocks

masonry with 100 mm thick AAC blocks in super structure
above plinth level up to floor V level in cement mortar 1:4 (1
cement : 4 coarse sand ). The rate includes providing and
placing in position 2 Nos 6 mm dia M.S. bars at every third
course of masonry work.

MATERIAL
8655 Autoclaved aerated cement (AAC) blocks. cum 1.0000
LABOUR
Reinforcement bars
5.22.1 Rate as per item no. 5.22.1 of SH : Reinforced cement kg 13.2000
concrete work
(0.75 x1.5 =1.13).
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.4 Providing and laying Gypsum panel partitions 100 mm thick

with water proof Gypsum panels of size 666x500x100 mm,
made of calcite phosphor Gypsum fixed with tongue and
groove, jointed with bonding plaster as per manufacturer’s
specifications in superstructure above plinth level up to floor
V level. Gypsum blocks will have a minimum compressive
strength of 9.3 kg/cm2

MATERIAL
8656 Gypsum panel 666 X 500 X 100 mm size sqm 10.0000
8657 Bonding plaster for Gypsum panel. kg 25.0000
9999 Sundries & scaffolding L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
6.41 Extra for Gypsum panel Partitions in superstructure above

floor V level for every four floors or part thereof.

Details of cost for 10 sqm. per four floor
Extra labour element for lifting of materials above floor V
level.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm
Say
6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with
common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 including grouting with cement mortar 1:4 (1
cement : 4 fine sand).

9999 Excavation and disposal of surplus earth L.S. 2.7300
2nd class bricks = 42 nos. +
Add wastage @ 10% = 4.2 nos.
Total = 46.2 nos. Say 46.00 nos.
designation 7.5
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
6.45 Half brick masonry with non modular fly ash bricks of class
designation 10, conforming Io IS :12894, in
super structure above plinth and up to floor V level.
6.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand)

MATERIAL
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

MATERIAL
LABOUR
floor five level)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
6.47 Providing and laying autoclaved aerated cement blocks

masonry with 150mm/230mm/300 mm thick AAC blocks in
super structure above plinth level up to floor V level with RCC
band at sill level and lintel level with approved block laying
polymer modified adhesive mortar all complete as per
direction of Engineer- in-Charge. (The payment of RCC band
and reinforcement shall be made for separately).

MATERIAL
8655 Autoclaved areated cement (AAC) blocks cum 1.0000
0357 Polymer modified adhesive mortar Kg 30.0000
LABOUR
floor two level up to floor five level) (0.75x1.50 = 1.13)

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
7.1 Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1
cement : 6 coarse sand : 12 graded stone aggregate 20 mm
nominal size) up to plinth level with :

MATERIAL
1157 Stone for masonry work cum 1.0000
1154 Through and bond stone size 24 x24 x39 cm 100 Nos 0.0700
Carriage:
2215 Carriage of Soling stone & masonry stone cum 1.1600
7.00x24cmx24cmx39cm = 0.16 cum.
1.00cum. + 0.16 cum. = 1.16 cum.
LABOUR
0125 Mason (for plain stone work) 2nd class) day 1.0700
9999 Cement concrete 1:6:12 L.S. 45.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.2 Random rubble masonry with hard stone in superstructure

above plinth level and up to floor five level, including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12
graded stone aggregate 20 mm nominal size) at window sills,
ceiling level and the like.

MATERIAL
1154 Through and bond stone size 24 x 24 x39 cm 100 Nos 0.0700
Carriage of stone-
7.00x24cmx24cmx39cm = 0.16 cum.
1.00cum. + 0.16 cum. = 1.16 cum.
LABOUR
floor five level)
9999 Sundries L.S. 15.2100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.4 Extra for random rubble masonry with hard stone in :

7.4.1 Square or rectangular pillars
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.4.2 Circular pillars

LABOUR
Labour for cutting and dressing stones-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
7.5 Extra for random rubble masonry with hard stone curved on
plan for a mean radius not exceeding 6 m.
LABOUR
Labour for cutting and dressing stones-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.6 Coursed rubble masonry (first sort) with hard stone in

foundation and plinth with :
MATERIAL
7.00x24cmx24cmx39cm = 0.16 cum.
1.21+0.16=1.37 Cum
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.7 Coursed rubble masonry (second sort) with hard stone in

foundation & plinth with :
MATERIAL
Carriage:
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.8 Coursed rubble masonry with hard stone (first or second sort)
in superstructure above plinth level and up to floor five level.
7.8.1 Masonry work (first sort), in cement mortar 1:6 (1 cement : 6

coarse sand)
MATERIAL
7.00 x 24 cm x24 cm x 39 cm = 0.16 cum.
1.21 cum. + 0.16 cum = 1.37 cum
LABOUR
floor five level)
9999 Sundries, scaffolding etc. L.S. 37.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.8.2 Masonry work (second sort), in cement mortar 1:6 (1 cement:

6 coarse sand)
MATERIAL
Carriage:
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
LABOUR
floor five level)
9999 Sundries, scaffolding etc. L.S. 37.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.10 Extra for coursed rubble masonry with hard stone (first or
second sort) in:
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.10.2 Circular pillars

LABOUR
Labour for cutting and dressing :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
7.11 Extra for coursed rubble masonry with hard stone (first or
second sort) curved on plan for a mean radius not exceeding 6
m.

Extra
Labour for cutting and dressing:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum.
Say
7.12 Stone work in plain ashlar in super structure up to floor five

level in cement mortar 1:6 (1 cement : 6 coarse sand)
including pointing with cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment matching the stone
shade :
7.12.1 One face dressed

7.12.1.1 Red sand stone
Details of cost for 10 cudm
MATERIAL
Red sand stone
Finished work = 10 cudm.+ Add wastage @ 33.3% = 3.33
cudm. Total = 13.33 cudm
1160 Red sand stone block 10 cudm 1.3330
2216 Carriage of Stone blocks white & red sand stone & kota stone tonne 0.0310
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Extra labour for lifting of materials up to floor V level
(0.01x1.50 = 0.015)
Dressing charges
LABOUR
0100 Bandhani day 0.0440
Fixing charges
LABOUR
9999 Mortar for laying and pointing L.S. 8.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1.00 cum
Say
7.12.1.2 hite sand stone

MATERIAL
White sand stone
1161 White sand stone block 10 cudm 1.3330
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
(0.01x1.50 = 0.015)
Dressing charges
LABOUR
Fixing charges
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1.00 cum
Say
7.12.2 Both face dressed

MATERIAL
Red sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
(0.01x1.50 = 0.015)
Dressing charges
LABOUR
Fixing charges
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.12.2.2 White sand stone

MATERIAL
White sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
(0.01x1.50 = 0.015)
Dressing charges
LABOUR
Fixing charges
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.13 Stone work plain ashlar in arches in super structure up to floor

V level in cement mortar 1:3 (1 cement : 3 coarse sand)
including centering, shuttering and pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade.

MATERIAL
Red sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
Fixing charges
LABOUR
9999 Centering and shuttering L.S. 13.5200
9999 Extra for using white cement L.S. 8.0600
floor five level)
(0.01 x 1.5 = 0.015)
Coolie day 0.0150
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
Fixing charges
LABOUR
floor five level)
(0.01 x 1.5 = 0.015)
Coolie day 0.0150
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
Red sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
Fixing charges
LABOUR
floor five level)
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
Fixing charges
LABOUR
floor five level)
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.14 Stone work plain ashlar in domes , in super structure up to

floor V level in cement mortar 1:3 (1 cement : 3 coarse sand)
including centering, shuttering and pointing with white
cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade.

MATERIAL
Red sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
0126 Mason (for ornamental stone work) Ist class 0.1760
Fixing charges
LABOUR
floor five level)
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne.
Say 0.031 t.
Dressing charges
LABOUR
0126 Mason (for ornamental stone work) Ist class day 0.1760
Fixing charges
LABOUR
floor five level)
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
Red sand stone
cudm. Total = 13.33 cudm.
slab @ 2.30kg/cudm = 13.33x2.30=30.659 kg =0.03065 tonne
say 0.031
Dressing charges
LABOUR
Fixing charges
LABOUR
9999 Centring and shuttering L.S. 33.1500
Extra labour for lifting of material up to floor five level
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
say 0.031
Dressing charges
LABOUR
Fixing charges
LABOUR
9999 Centring and shuttering L.S. 33.1500
Extra labour for lifting of material up to floor five level
(0.01 x 1.5 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.15 Stone work ashlar punched (ordinary) in superstructure up to

floor five level in cement mortar 1:6 (1 white cement : 6
coarse sand) including pointing with cement mortar 1:2 (1
white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.

MATERIAL
Red sand stone
say 0.031
Dressing charges
LABOUR
Fixing charges
LABOUR
(0.01x1.50 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
say 0.031
Dressing charges
LABOUR
Fixing charges
LABOUR
(0.01x1.50 = 0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.15.2 Both faced punched

MATERIAL
Red sand stone
say 0.031
Extra labour for lifting of material up to floor V level. (0.01 x

1.50 = 0.015)
Dressing charges
LABOUR
Fixing charges
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say

MATERIAL
White sand stone
say 0.031
Extra labour for lifting of material up to floor V level. (0.01 x

1.50 = 0.015)
Dressing charges
LABOUR
Fixing charges
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.16 Extra for stone work, random rubble / coursed rubble

masonry / ashlar masonry above floor V level for every four
floors or part thereof.

Details of cost for 10 cudm or 0.01 cum above floor V level
Labour required for lifting of material (above floor five level

for each additional four floor or part their of)
Extra labour for lifting of materials above floor V level
(0.01 x 2.0 = 0.020)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.17 Extra for plain ashlar or ashlar punched in :

Details of cost for 10 cudm or 0.01 cum
9999 Labour and materials L.S. 8.9700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.18 Extra for stone work; plain ashlar or ashlar punched curved on
plan with a mean radius not exceeding 6 m.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.19 Extra for additional cost of centering for arches exceeding 6m

span including all strutting, bolting, wedging etc. and removal
(area of soffit to be measured).

Centering and shuttering for arches and carved surface
exceeding 6m in span (an average of 8m)
Radius R = 5m
2R-2 = 4+4
tan -¹ (4/3)=53.28°
2x53.28=106°
Surface area =2x22/7x5x3.6x106/360 =33.31sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Total = 7.103cum.
Fittings:
32 no. @0.50m each = 16m
Straps-50mmx10mm = 8 Nos. @0.25m
each = 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775 Qtl
Bolts 160 Nos. 254 mm long 16mm dia.- 160x.254xl .58=64.21
kg=0.64q.
Qty taken l/8th of qty for cost using once = 0.64/8 = 0.08 Qtl

Carriage of steel = 0.1342 t
Qty taken l/8th of qty for cost using once = 0.1342/8 =
0.01677 t = 0.0168 t
LABOUR
0114 Beldar day 24.0000
9999 Sundries L.S. 134.5500
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e.
for an average of 8 m span
5.9.9 Rate as per item no 5.9.9 of SH : Reinforced cement concrete sqm -33.3100
work
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 33.31sqm.
Cost per sqm of soffit area
Say
7.20 Stone work ashlar sunk or moulded or sunk and moulded up
to floor five level in cement mortar 1:6 (1 cement : 6 coarse
sand) including pointing with white cement mortar 1:2 (1
white cement : 2 stone dust) with an admixture of pigment
matching the stone shade :
7.20.1 Red sand stone

MATERIAL
slab @ 2.30kg/cudm = 13.33x2.30=30.659 kg = 0.03065 tonne
say 0.031t.

LABOUR
Fixing charges
LABOUR
(0.01x1.50=0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.20.2 White sand stone

MATERIAL
slab @ 2.30kg/cudm = 13.33x2.30=30.659 kg = 0.03065 tonne
say 0.031t.

LABOUR
Fixing charges
LABOUR
(0.01x1.50=0.015)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.21 Extra for stone work ashlar sunk or moulded or sunk and
moulded or carved in :
7.21.1 Triangular or Square or rectangular pillars
9999 LABOUR L.S. 11.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.21.2 Circular or polygonal pillars

9999 LABOUR L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.22 Extra for stone work ashlar sunk or moulded in cornices.

Details of cost for a cornice 30cm long, 60cm deep and 15cm
projection
Extra labour :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30cm long 60cm deep and 15cm girth
Cost of per metre per cm girth (60cm deep)
Say
7.24 Extra for stone work (veneer work) curved on plan with a
mean radius not exceeding 6 m.
Details of cost for 10 cudm.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.26 Providing and fixing stone dowels 10x5x2.50 cm cut to double

wedge shape as per design in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary chases.

Details of cost for one dowel
9999 Cost of stone including carriage L.S. 9.1000
9999 Labour for dressing dowel cutting chase and fixing etc. L.S. 5.3300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each dowel
Say
7.28 Providing and fixing sloping chajja of stone 40 mm thick and

up to 80 cm wide beyond the wall as measured along the
slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12
mm diameter anchoring steel bar, 45 cm long, fixed in each
stone and supported on and including with bricks cove in
cement mortar 1:4 (1 cement : 4 coarse sand), including
pointing in cement mortar 1:2 (1 white cement : 2 stone dust)
with an admixture of pigment matching the stone shade :
7.28.1 Red sand stone :
7.28.1.1 With common burnt clay F.P.S.(non modular) bricks of class
designation 7.5
Details of cost for a chajja 2.00 sqm.
(finished work)
MATERIAL
Chisel dressed 80cm sloping length plus 20cm bearing
Area = 2.5xl.00=2.50sqm
1164 Red sand stone slab 40 mm thick (un-dressed) sqm 2.7500
slab @ 2.3kg/cudm.
Labour for dressing:
1002 Mild steel round bar 12 mm dia and below quintal 0.0200
9999 Cutting threads and cost of nuts, washers, etc. L.S. 67.3400
Mortar for pointing 1:2 (1 Cement : 2 Stone dust)
9999 Pigment L.S. 6.2400
9999 Extra cost of white cement L.S. 26.9100
LABOUR
9999 Scaffolding and sundries etc. L.S. 16.1200
Brick cover support 4 courses with bricks of class designation
75
4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm
9999 Cost of Brick cover support. L.S. 104.0000
Brick work in triangular gap above cover with bricks of class
designation 7.5 in cement mortar 1:4
1/2x2.5x0.2x0.07=0.018cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 sqm.
Cost of 1 sqm.
Say
7.28.2 White sand stone :

7.28.2.1 With common burnt clay F.P.S.(non modular) bricks of class
designation 7.5
Details of cost for a chajja 2.00 sqm.
(finished work)
MATERIAL
Chisel dressed 80cm sloping length plus 20cm bearing
Area = 2.5x1.00=2.50sqm
1165 White sand stone slab 40 mm thick (un-dressed) sqm 2.7500
slab @ 2.3kg/cudm.
Anchoring steel bars 12mm dia. 45cm long, 5 Nos. @
0.80kg/m = 0.02q
9999 Cutting threads and cost of nuts, washers, etc. L.S. 67.3400
Mortar for pointing 1:2 (1 Cement : 2 Stone dust)
9999 Pigment L.S. 6.2400
LABOUR
Brick cover support 4 courses with bricks of class designation
75
4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm
9999 Cost for Brick cover support . L.S. 104.0000
Brick work in triangular gap above cover with bricks of class
designation 5 in cement mortar 1:4
1/2x2.5x0.2x0.07=0.018cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 sqm.
Cost of 1 sqm.
Say
7.29 Providing and fixing horizontal chajja of stone 40 mm thick

and up to 80 cm projection in cement mortar 1:4 (1 cement :
4 coarse sand), including pointing in white cement mortar 1:2
(1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade :
Details of cost for (2.5x0.75m) 1.875 sqm.
MATERIAL
Taking 2.5mx75cm projection + 15cm bearing = 2.5x0.9
= 2.25 sqm.
slab @ 2.3kg/cudm.
9999 Mortar for pointing 1:2 L.S. 53.8200
9999 Pigment L.S. 6.2400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.875 sqm.
Cost of 1 sqm.
Say

Details of cost for (2.5x0.75m) 1.875 sqm.
MATERIAL
Taking 2.5mx75cm projection + 15cm bearing = 2.5x0.9
= 2.25 sqm.
slab @ 2.3kg/cudm.
9999 Mortar for pointing 1:2 L.S. 53.8200
9999 Pigment L.S. 6.2400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.875 sqm.
Cost of 1 sqm.
Say
7.3 30 mm red sand stone sun-shade (chisel-dressed) supported

on red sand stone brackets, fixed in walls with cement mortar
1:4 (1 cement : 4 coarse sand), including finishing complete.

Detail of cost for window 1.6m length and
0.70m width = 1.12 sqm.
MATERIAL
over all width 0.70+0.15=0.85 metres
Total area = 1.6x0.85=1.36sqm.
Red stone brackets (chisel dressed) 30mm average
thickness over all width of brackets
0.53+0.23=0.76m
2x0.3x0.76=0.46
Total 1.36+0.46 =1.82sqm.+
Add wastage @10% = 0.18sqm.
Total = 2.00 sqm.
slab @ 2.3kg/cudm.
9999 Cement mortar 1 :4 L.S. 13.5200
Labour for dressing and fixing:
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.12 sqm.
Cost of 1 sqm.
Say
7.31 Providing and fixing red sand stone brackets 55x22.5x45 cm
sunk and moulded including providing and fixing with 4 Nos
gun metal cramp 25x6 mm 30 cm long

Details of cost for 1 bracket
Quantity of stone for 1 bracket
1 x 55 x 22.5 x 45cm = 0.056cum or 56 cudm.
Red sand stone = 56 cudm.
Add wastage 10% = 5.6 cudm.
Total = 61.6 cudm.
slab @ 2.3kg/ cudm.
Dressing charges
LABOUR
0373 Cramp Gun metal 25x6x300 mm each 4.0000
Fixing charges
LABOUR
Extra labour for ornamental finish :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 Bracket
Say
7.32 Stone work, plain in copings, cornices, string courses and
plinth courses, up to 75 mm thick in Cement mortar 1:6 (1
cement : 6 coarse sand), including pointing with white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture
of pigment matching the stone shade.

Details of cost for cornices (30cm long, 30cm deep and
7.5cm project-iron) = 6.75cudm.
MATERIAL
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
7.12.1.1 Rate as per item no 7.12.1.1 of SH : Stone Work cum 0.0068
Extra labour for making the cornices
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.75 cudm
Cost per cum.
Say

Details of cost for cornices (30cm long
30cm deep and 7.5cm project-iron) = 6.75cudm.
MATERIAL
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
7.12.1.2 Rate as per item no 7.12.1.2 of SH : Stone Work cum 0.0068
Extra labour for making the cornices
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.75 cudm.
Cost per cum.
Say
7.33 Providing and fixing stone jali 40 mm thick throughout in

pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment, matching the stone
shade, jali slab without any chamfers etc.

MATERIAL
Red sand stone slab 40mm = 1.00 sqm. Add 10%
wastage = 0.10 sqm. Total = 1.10 sqm.
slab
LABOUR
For making, dressing and fixing
9999 Mortar and Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say

MATERIAL
White sand stone slab 40mm = 1.00 sqm. Add 10%
wastage = 0.10 sqm. Total = 1.10 sqm.
slab
LABOUR
For making, dressing and fixing
9999 Mortar and Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
7.34 Extra for laying stone work in or under water and/or liquid
mud including cost of pumping or bailing out water and
removing slush etc. complete.
NOTE :- The quantity will be calculated by multiplying the

depth measured from sub-soil water level up to the centre of
gravity of stone work under sub - water with the quantity of
stone work in cum executed under the sub-soil water. The
depth of centre of gravity shall be reckoned correct to 0.1 m,
0.05 m or more shall be taken as 0.1 m and less than 0.05 m
ignored.

pumping hours = 3 hrs. on 0.375day.
for cleaning slush
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
7.35 Extra for laying stone work in or under foul position.

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
7.38 Stone tile work for wall lining up to 10 m height with special
adhesive over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand), including pointing in white cement
with an admixture of pigment to match the stone shade.
7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.1 Granite stone of any colour and shade
Details of cost for 10sqm. MATERIAL
Granite stone tile = 10.00sqm.
Add 2.5% wastage = 0.25sqm.
Total =10.25 sqm
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 10.2500
9977 Carriage of granite tiles L.S. 40.0400

slurry @ 3.3 kg/sqm
9999 Mortar for pointing in white cement L.S. 25.7400
LABOUR
Labour for placing and fixing :
9999 Granular sand particles mixed with araldite to be pasted on L.S. 260.0000
each side to form interlocking arrangement with cement
plaster
9999 Sundries L.S. 171.6000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
7.38.1.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra
black marble
MATERIAL
8mm thick Raj Nagar white stone tile = 10.00sqm.+ Add 2.5%
wastage = 0.25sqm. Total = 10.25sqm
7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar sqm 10.2500
white
9977 Carriage of Raj Nagar white stone tiles L.S. 40.0400
slurry @ 3.3 kg/sqm
Labour for placing and fixing :
9999 Granular sand particles mixed with araldite to be pasted on L.S. 260.0000
each side to form interlocking arrangement with cement
plaster
9999 Sundries L.S. 171.6000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
8.1 Marble work gang saw cut (polished and machine cut) of
thickness 18 mm for wall lining (veneer work), backing filled
with a grout of average 12 mm thick in cement mortar 1:3 (1
cement : 3 coarse sand), including pointing with white cement
mortar 1:2 (1 white cement : 2 marble dust) with an
admixture of pigment to match the marble shade (To be
secured to the backing by means of cramps, which shall be
paid for separately).
8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble.
8.1.1.1 Area of slab up to 0.50 sqm
MATERIAL
Finished work = 0.50sqm. Add for wastage @ 20% = 0.10 sqm.
Total = 0.60 sqm.
7452 Raj nagar plain white marble (table rubbed and polished) 18 sqm 0.6000
mm thick (slab area up to 0.50 sqm)
slab
White cement mortar 1:2 (1 white cement : 2 marble dust)
LABOUR
For fixing
0128 Mate day 0.1650
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.50 sqm.
Cost for one sqm.
Say
8.1.1.2 Area of slab over 0.50 sqm
MATERIAL
Finished work = 1.00 sqm. Add for wastage @ 20% = 0.20
sqm. Total = 1.20 sqm.
mm thick (slab area more than 0.50 sqm)
slab
White cement mortar 1:2 (1 white cement : 2 marble dust)
LABOUR
For fixing
0128 Mate day 0.3300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm
Cost for one sqm
Say
8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for
kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar 1:4 (1
cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high
gloss finish etc. complete at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble
MATERIAL
Mirror polished Abu plain white = 0.50 sqm.+Wastage 5%
0.025 sqm. = 0.525 sqm
mm thick (slab area up to 0.50 sqm)
20mm thick Cement mortar 1 : 4 (1 cement : 4 coarse sand)
LABOUR
9999 Moulding and edge polishing L.S. 39.0000
9999 Sundries apoxy resin & cutting machine etc. L.S. 16.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say

MATERIAL
Mirror polished Abu plain white = 1.00 sqm.+ Wastage 5%
(0.05sqm.)= 1.05 sqm
mm thick (slab area more than 0.50 sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm.
Say
8.2.2 Granite stone slab colour black, Cherry/Ruby red

MATERIAL
Mirror polished granite = 0.50 sqm.+Wastage 5% 0.025 sqm. =
0.525 sqm
7295 Granite of colour black, cherry/ruby red 18 mm thick (slab sqm 0.5250
area up to 0.50 sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say

MATERIAL
Mirror polished granite = 2.00 sqm.+Wastage 5% = 0.10 sqm.
= 2.10 sqm
7298 Granite of colour black, cherry/ruby red 18 mm thick (slab sqm 2.1000
area more than 0.50 sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.00 sqm.
Cost of 1 sqm
Say
8.2.3 Granite stone slab all colour and texture except black,
Cherry/Ruby red
MATERIAL
Mirror polished granite = 0.50 sqm.+Wastage 5% 0.025 sqm. =
0.525 sqm
7297 Granite stone slab all colour and texture except black, sqm 0.5250
Cherry/Ruby red 18 mm thick (slab area up to 0.50 sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say

MATERIAL
Mirror polished granite = 2.00 sqm.+ Wastage 5% = 0.10sqm,
Total = 2.10 sqm
7299 Granite stone slab all colour and texture except black, sqm 2.1000
Cherry/Ruby red 18 mm thick (slab area more than 0.50 sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.00 sqm.
Cost of 1 sqm
Say
8.3 Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to edge to
give high gloss finish etc. complete as per design approved by
Engineer-in- Charge.
8.3.1 Marble work

Details of cost for 10.00 m
LABOUR
0019 Hand Grinder For mirror polish day 1.5000
9999 Sundries Blades & Polished etc. L.S. 78.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost per metre
Say
8.3.2 Granite work

LABOUR
0019 Hand Grinder For mirror polish day 2.5000
9999 Sundries Blades & Polished etc. L.S. 117.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost per metre
Say
8.4 Extra for fixing marble /granite stone, over and above
corresponding basic item, in facia and drops of width up to
150 mm with epoxy resin based adhesive, including cleaning
etc. complete.

Details of cost for facia 1.5m long and 0.15m wide
LABOUR
9999 Scaffolding, epoxy L.S. 39.0000
Cement mortar 1 : 4 (1 cement :4 coarse sand)
1.5x0.15x0.02 = 0.005cum.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.5 metre
Cost per metre
Say
8.5 Extra for providing opening of required size & shape for wash
basin/ kitchen sink in kitchen platform, vanity counter and
similar location in marble/ Granite/ stone work, including
necessary holes for pillar taps etc. including moulding, rubbing
and polishing of cut edges etc. complete.

Details of cost for providing an opening of required size
and shape
LABOUR
9999 Sundries L.S. 15.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
8.6 Mirror polishing on marble work/Granite work/stone work

where ever required to give high gloss finish complete.

LABOUR
0013 Machine for rubbing of floors day 1.0000
9999 Sundries grease, mop grinding stones etc. L.S. 65.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
8.7 Providing and fixing cramps of required size & shape in RCC/
CC / Brick masonry backing with cement mortar 1:2 ( 1
cement :2 coarse sand), including drilling necessary hole in
stones and embedding the cramp in the hole (fastener to be
paid separately).
8.7.1 Gunmetal cramps

Details of cost for 1.03kg
MATERIAL
Gun metal cramp
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^(-5)
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^(-5)
= 13.3 x 10^(-5)
less hole 10 x 0.024 x 0.010 x 0.006 =
1.4 x 10^(-5)
= 11.9 x 10^5 x 8640 = 1.03 kg
Add wastage @ 5% = 0.051kg. Total = 1.08 kg.
7338 Gun metal cramp kilogram 1.0800
9977 Carriage L.S. 3.9000
9999 Labour for fixing in position L.S. 65.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.03 kg
Cost per kg
Say
8.7.2 Stainless steel cramps

Details of cost for 0.934 kg
MATERIAL
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^(-5)
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^(-5)
= 13.3 x 10^(-5)
less hole 10 x 0.024 x 0.010 x 0.006 = 1.4 x 10^(-5)
= 11.9 x 10^5 x 7850 = 0.934 kg
Add wastage @ 5% = 0.047kg. Total = 0.981 kg.
7339 Stainless steel cramp kilogram 0.9810
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.03 kg
Cost per kg
Say
8.8 Providing and fixing expansion hold fasteners on C.C.

/R.C.C./Brick masonry surface backing including drilling
necessary holes and the cost of bolt etc complete.
8.8.1 Wedge expansion type

8.8.1.1 Fastener with threaded dia 6 mm
Details of cost for 30nos. W.E.H. fastener
MATERIAL
7430 Wedge expansion hold fastener 1/4" or 6 mm, 36.5mm length each 30.0000
1034 Bolts and nuts up to 300 mm in length (36.5+10mm) quintal 0.0045

LABOUR
9999 Hire and running charges for hand drill machine
Sundries, drilling bit scaffolding etc. L.S. 32.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 nos.
Cost of each
Say
MATERIAL
7431 Wedge expansion hold fastener 3/8" or 10 mm, 44.5mm each 30.0000
length
1034 Bolts and nuts up to 300 mm in length (44.5+10mm) quintal 0.0060
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 nos.
Cost of each
Say

MATERIAL
7432 Wedge expansion hold fastener 1/2" or 12 mm, 58.7mm each 30.0000
length
Length (58.7+10mm) @ 0.05 kg./each
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 nos.
Cost of each
Say
8.9 Stone tile (polished) work for wall lining over 12 mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse sand) and cement
slurry @ 3.3 kg/sqm including pointing in white cement
complete.
8.9.1 8mm thick

8.9.1.1 Raj nagar plain white marble/ Udaipur green marble/ Zebra
black marble
MATERIAL
8mm thick marble tiles
Qty. = 1.00 sqm. +Add wastage @ 2.5% = 0.025 sqm. Total =
1.025 sqm.
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 1.0250
9977 Carriage of tiles L.S. 3.9500
9977 Mortar for pointing L.S. 25.3800
9999 Sundries etc. day 16.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm
Cost for 1.00 sqm
Say
8.9.1.2 Granite of any colour and shade

8mm thick Granite tiles.
Qty. = 1.00 sqm. + Add wastage@ 2.5% = 0.025 sqm. Total =
1.025 sqm.
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 1.0250

9999 Mortar for pointing L.S. 25.3800
9999 Sundries etc. L.S. 16.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
8.10 Providing and fixing stone slab with table rubbed, edges
rounded and polished, of size 75x50 cm deep and 1.8 cm
thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone
in the chase with epoxy grout or with cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm
nominal size) as per direction of Engineer-in-charge and
finished smooth.
8.10.1 White Agaria Marble Stone

Details of cost for one No or 0.375 sqm.
MATERIAL
Agaria Marble Stone
1 X 0.75 X 0.50 =0.375 sqm+Add wastage 20% = 0.075 sqm.
Total = 0.45sqm.
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria sqm 0.4500
Marble stone - 18 mm thick
9999 Cement concrete 1:2:4 for filling L.S. 21.5800
9999 Labour for fixing, edge rounding and final polishing . L.S. 43.1600
9999 Sundries L.S. 21.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.375sqm
Cost of 1.00 sqm
Say
8.10.2 Granite Stone of approved shade

Details of cost for one No or 0.375sqm.
MATERIAL
Granite Stone
1x0.75x0.50 = 0.375sqm.+Add wastage 20% = 0.075 sqm.
Total = 0.45 sqm.
7245 Table rubbed polished stone 18mm thick (75x50cm) Granite sqm 0.4500
stone - 18mm thick
9999 Cement concrete 1:2:4 for fixing L.S. 21.5800
9999 Labour for fixing, edge rounding and final polishing . L.S. 43.1600
9999 Sundries L.S. 21.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.375 sqm
Cost of 1.00 sqm
Say
8.11 Providing and fixing machine cut, mirror/ eggshell polished ,

Marble stone work for wall lining (veneer work) including
dado, skirting, risers of steps etc., in required design and
pattern wherever required, stones of different finished
surface texture, on 12 mm (average) thick cement mortar 1:3
(1 cement : 3 coarse sand) laid and jointed with white cement
slurry @ 3.3 kg/sqm including pointing with white cement
slurry admixed with pigment of matching shade, including
rubbing, curing, polishing etc. all complete as per
Architectural drawings, and as directed by the Engineer-in-
Charge.
8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona,

Fire Red or Dark Emperadore etc.
MATERIAL
Finished work= 0.5 sqm+Add for wastage @ 20%=0.1 sqm.
Total 0.60 sqm
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to sqm 0.6000
0.5 sqm).
2216 Carriage of stone slab tonne 0.0300
Cement mortar 1:3 (1 Cement:3 Coarse sand)
3.8 Rate as per Item No.3.8 of SH: MORTARS cum 0.0080
0368 White Cement Slurry @ 3.3kg/sqm tonne 0.0017
2209 Carriage of white Cement tonne 0.0017
LABOUR :
FOR fixing
0128 Mate day 0.1650
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.5 sqm
Cost of 1 sqm
Say
8.14 Stone work (machine cut edges) for wall lining etc. (veneer
work) up to 10 metre height, backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment
matching the stone shade : (To be secured to the backing and
the sides by means of cramps and pins which shall be paid for
separately) :
8.14.1 Red sand stone - exposed face fine dressed with rough
backing.
8.14.1.1 70 mm thick
MATERIAL
Finished work = 70 cudm. + Add wastage @ 33.3% = 23.33
slab
@ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
0125 Mason (for plain stone work) 2nd class day 0.4480
1237 Cutting marble or sand stone slab up to 50 mm thick by metre 4.0000
mechanical device
Mortar for laying and pointing
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.1.2 60 mm thick
MATERIAL
Finished work = 60 cudm+Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.1.3 50 mm thick
MATERIAL
Finished work = 50 cudm+Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.1.4 40 mm thick
MATERIAL
Finished work = 40 cudm+Add wastage @ 33.3% = 13.33
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.1.5 30 mm thick
MATERIAL
Finished work = 30 cudm+Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.2 Red sand stone - Exposed face machine cut and table rubbed
with rough backing.
8.14.2.1 70 mm thick
MATERIAL
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.2.2 60 mm thick
MATERIAL
Total = 80 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.2.3 50 mm thick
MATERIAL
Finished work = 50 cudm+Add wastage @ 33.3% = 16.7 cudm. 10 cudm 6.6700
Total = 66.7 cudm.
1160 Red sand stone block
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
1237 Cutting marble or sand stone slab up to 50 mm thick by
mechanical device metre 4.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.2.4 40 mm thick
MATERIAL
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.2.5 30 mm thick
MATERIAL
Finished work = 30 cudm. Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.3 White sand stone - exposed face fine dressed with rough
backing .
8.14.3.1 70 mm thick
MATERIAL
Finished work = 70 cudm. Add wastage @ 33.3% = 23.33
slab @ 2.30kg/cudm
Dressing charges
LABOUR
0115 Coolie Day 0.1120
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.3.2 60 mm thick
MATERIAL
Finished work = 60 cudm. Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.3.3 50 mm thick
MATERIAL
Finished work = 50 cudm. Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
slab @ 2.30 kg/cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.3.4 40 mm thick
MATERIAL
Total = 53.3 cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.3.5 30 mm thick
MATERIAL
Total = 39.99 cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.4 White sand stone - Exposed face machine cut and table
rubbed with rough backing.
8.14.4.1 70 mm thick
MATERIAL
Finished work = 70 cudm. Add wastage @ 33.3% =
23.33 cudm. Total = 93.33 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.4.2 60 mm thick
MATERIAL
Total = 80 cudm.
slab @ 2.30kg/cudm
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.4.3 50 mm thick
MATERIAL
Total = 66.7 cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.4.4 40 mm thick
MATERIAL
Total = 53.3 cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.4.5 30 mm thick
MATERIAL
Total = 39.99 cudm.
Dressing charges
LABOUR
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.5 Gang saw cut stone

8.14.5.1 30mm thick White sand stone
MATERIAL
1.00 sqm + 0.05 sqm (Add wastage @ 5%) = 1.05 sqm
8684 White sand stone gang saw cut 30 mm thick sqm 1.0500
Dressing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.14.5.2 30mm thick Red sand stone

MATERIAL
1.00 sqm + 0.05 sqm (Add wastage @ 5%) = 1.05 sqm
8683 Red sand stone gang saw cut 30 mm thick sqm 1.0500
Fixing charges
LABOUR
mechanical device
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
8.15 Providing and fixing stainless steel cramps of required size and
shape for anchoring stone wall lining to the backing or
securing adjacent stones in stone wall lining in cement mortar
1:2 (1 cement : 2 coarse sand), including making the necessary
chases in stone and holes in walls wherever required.

Details of cost for one cramp of 0.934kg
MATERIAL
Stainless steel cramp
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^5
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^5
= 13.3 x 10^5
less hole 10 x 0.024 x 0.010 x 0.006
= 1.4 x 10^5
= 11.9 x 10^5 x 7850 = 0.934 kg
Add wastage @ 5% = 0.047kg.
Total = 0.981 kg.
7339 Stainless steel cramp kilogram 0.9810
9977 CARRIAGE L.S. 3.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.934 kg.
Cost per kg
Say
8.16 Providing and fixing copper pins 7.5 cm long 6 mm diameter

for securing adjacent stones in stone wall lining in cement
mortar 1:2 (1 cement : 2 coarse sand), including making the
necessary chases.

Details of cost for one copper pin
MATERIAL
0873 Copper pins 6 mm dia 7.5 cm long each 1.0000
9999 Labour for making pin in to required shape and size, cutting L.S. 3.9000
chases in stone and fixing in position
9999 Sundries including hire charges of hand cut machine etc. L.S. 1.9500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one copper pin
Say
8.17 Wall lining butch work up to 10m height with Dholpur stone
40 mm thick rough facing on the exposed surface with stone
strips of minimum length 300 mm and required width,
including embedding every tenth layer and bottom most layer
in masonry or concrete after making necessary chases of size
75x75 mm and by providing layer of 75 mm thick strips i/c 12
mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse
sand) i/c ruled pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment to match
the shade of stone complete as per direction of Engineer-in-
charge.

Dholpur stone 40mm thick
Wall face = 1.00sqm.
Deduct for embedded portion 3x0.04x1.0 = 0.12 sqm.
Net quantity = 0.88sqm.
Add wastage 5% = 0.04sqm.
Total = 0.92 sqm.
75mm thick
3x0.04x1.0 = 0.12 sqm.
Add wastage 5% = 0.01 sqm.
Total = 0.13 sqm.
slab
0.92x0.04 = 0.0368 cum.
0.13x0.075 = 0.0100 cum.
= 0.0468 cum. or 468 cudm.
468 cudm @ 2.3 kg/cudm = 108 kg = 0.108 tonne
mechanical device
Assuming 50mm thick strips 20x1.0 = 20 metre
Mortar with coarse sand 1:3 for
(a) stone backing 12mm thick = 0.0144 cum.
(b) for fixing of stone = 0.40/25 = 0.0160 cum.
Total = 0.0304 cum.
Cutting chases and making good with mortar after inserting
stone etc.
18.78 Rate as per Item Number 18.78 of SH: Water metre 3.0000
9999 White cement and pigment for pointing L.S. 40.4300
LABOUR
9999 Sundries and scaffolding brushes etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1sqm.
Say
8.18 Stone work (machine cut edges Veneer work) for wall lining
up to 10 m height, backing filled with a grout of 12 mm thick
cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed
with Cement mortar 1:2 (1 cement : 2 stone dust), including
rubbing and polishing complete. (To be secured to the backing
and the sides by means of cramps and pins which shall be
paid for separately).
8.18.1 Kota stone slabs exposed face dressed and rubbed.

8.18.1.1 25 mm thick
MATERIAL
25mm thick kota stone slabs = 10 sqm.
Total = 11.50 sqm.
1169 Kotastone slab 25mm thick (rough chiselled) sq.m. 11.5000
slab
9999 Cement mortar for pointing. L.S. 40.4300
LABOUR
0139 Skilled Beldar (for floor rubbing etc.) day 10.8000
9999 Sundries L.S. 111.5400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
8.19 Extra for stone work for wall lining on exterior walls of height
more than 10 m from ground level for every additional height
of 3 m or part there of.

Analysis same as Item Number 13.74
MATERIAL
9999 Sundries L.S. 28.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
8.20 Providing and fixing dry cladding up to 10 metre heights with
30mm thick gang saw cut stone with (machine cut edges) of
uniform colour and size up to 1mx1m, fixed to structural steel
frame work and/ or with the help of cramps, pins etc. and
sealing the joints with approved weather sealant as per
Architectural drawing and direction of Engineer-in-charge.
(The steel frame work, stainless steel cramps and pins etc.
shall be paid for separately).
8.20.1 Red sand stone - 30mm thick gang saw cut stone
MATERIAL
Red sand stone = 1.00sqm. Add 5% wastage =
0.05sqm. Total = 1.05 sqm
8683 Red sand stone gang saw cut 30 mm thick sqm 1.0500
slab @ 2.30kg/cudm
Fixing Charges
LABOUR
1237 Cutting marble or sand stone slab up to 50 mm thick by
mechanical device metre 4.0000
9999 Fixing including weather sealant and removing L.S. 51.1000
9999 Silicon gun/ pump etc. L.S. 68.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm
Say
8.20.2 White sand stone - 30mm thick gang saw cut stone
MATERIAL
White sand stone = 1.00sqm
Add 5% wastage = 0.05sqm
Total = 1.05 sqm
8684 White sand stone gang saw cut 30 mm thick sqm 1.0500
slab @ 2.30kg/cudm
Fixing Charges
LABOUR
1237 Cutting marble or sand stone slab up to 50 mm thick by metre
mechanical device
9999 Fixing including weather sealant and removing L.S. 51.1000
9999 Silicon gun/ pump etc. L.S. 68.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm
Say
8.21 Providing and fixing structural steel frame (for dry cladding
with 30 mm thick gang saw cut with machine cut edges sand
stone) on walls at all heights using M.S. square/ rectangular
tube in the required pattern as per architectural drawing,
including cost of cutting, bending, welding etc. The frame
work shall be fixed to the wall with the help of M.S. brackets/
lugs of angle iron/ flats etc. which shall be welded to the
frame and embedded in brick wall with cement concrete
block 1:2:4 (1 cement :2 coarse sand :4 graded stone
aggregate 20 mm nominal size) of size 300x230x300 mm,
including cost of necessary centring and shuttering and with
approved expansion hold fasteners on CC/RCC surface,
including drilling necessary holes. Approved cramps/ pins etc.
shall be welded to the frame work to support stone cladding,
the steel work will be given a priming coat of Zinc primer as
approved by Engineer-in-charge and painted with two or
more coats of epoxy paint (Shop drawings shall be submitted
by the contractor to the Engineer-in-charge for approval
before execution). The frame work shall be fixed in true
horizontal & vertical lines/planes. (Only structural steel frame
work shall be measured for the purpose of payment, stainless
steel cramps shall be paid for separately and nothing extra
shall be paid).

Details of cost for 100.78 kg.
M.S. tube 50x25x18mm
Vertical 4.0x3.0 mtr = 12.00
Vertical 4.0x3.0x0.93 =11.16 m
Total = 23.16 mtr
Add 10% wastage = 2.32 m
Total 25.48mtr @ 2.02 kg/m = 51.47 kg
4009 Mild steel tubes hot finished welded type kilogram 51.4700
Angle iron 50x50x6mm
16x0.60=9.60
16x0.15=2.40
Total=12.00
Add 10% wastage = 1.20m
Total=13.20m @4.50kg/m=59.40kg or 0.594 q
1007 Structural such as tees, angles channels and R.S. joists
quintal 0.5940
Cement concrete 1:2:4 =16x0.30x0.23x0.30=0.331 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete work cum 0.3310
Making holes in brick work=16nos.
LABOUR
Welding for frame welding
16x(2.5+5+2.5+5) = 240 cm
For hold fast 16x20cm = 320cm
Total = 560cm
LABOUR
9999 Sundries L.S. 80.7300
Painting with epoxy paint over and including
priming coat area 22.80x0.15 = 3.42
12x0.2 = 2.40
Total = 5.82sqm
13.52.1 Rate as per Item no. 13.52.1 of SH: Finishing sqm 5.8200
9999 For labour scaffolding etc L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100.78 kg
Cost for 1 kg
Say
8.22 Providing and fixing adjustable stainless steel cramps of

approved quality, required shape and size, adjustable with
stainless steel nuts, bolts and washer (total weight not less
than 260 gms), for dry stone cladding fixed on frame work at
suitable location, including making necessary recesses in
stone slab, drilling required holes etc complete as per
direction of the Engineer-in- charge.

Details of cost for 10 Nos.
8698 Stainless steel cramps(weight 260 grams) with nuts, bolts and each 10.0000
washer for dry stone cladding
LABOUR
For making holes, recesses etc. and fixing of stainless
steel cramps.
9999 Scaffolding, hire charges of drill machine etc. L.S. 20.8000
9999 Sundries L.S. 20.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 Nos.
Cost for 1 Nos.
Say
8.23 Providing 50x50x50 mm 2nd class teak wood plugs including

cutting brick work and fixing in cement mortar 1:3 (1 cement :
3 fine sand) and making good the walls etc.

MATERIAL
Teak wood (2nd class)
100x(50x50x50)mm = 0.0125cum
Add wastage @ 10% = 0.0013 cum.
Total = 0.0138 cum. Say 14 cudm.
1189 Second class teak wood in scantling 10 cudm 1.4000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 nos.
Cost of 1 no.
Say
8.24 Providing and fixing expandable fasteners of specified size
with necessary plastic sleeves and galvanised M.S. screws
including drilling holes in masonry work /CC/ R.C.C. and
making good etc. complete.
8.24.1 25 mm long
Details of cost of 10 nos.
MATERIAL
7312 Expandable fastener with plastic sleeve and M.S. screws. 25 each 10.0000
mm long
9999 Labour for drilling holes and making good etc. L.S. 20.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.2 32 mm long
MATERIAL
mm long
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.3 40 mm long
MATERIAL
mm long
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.4 50 mm long
MATERIAL
mm long
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.25 Providing and fixing 2nd class teak wood plain lining tongued
and grooved, including wooden plugs complete with
necessary screws and priming coat on unexposed surface.
8.25.1 40 mm thick
Details of cost of 10 sqm
MATERIAL
Teak wood (2nd class) 10x0.04m = 0.40cum+
1190 Second class teak wood in planks 10 cudm 44.0000
1231 Extra for selected planks of second class teakwood 10 cudm 44.0000
Second class teak wood plugs including cutting brick work and
fixing in cement mortar 1:3 (1 cement : 3 fine sand)
8.23 Rate as per item no 8.23 of SH : Cladding Work each 55.0000
Priming coat
LABOUR
For planning and fixing
0111 Carpenter 1st class day 2.1500
9999 Sundries & screws etc. L.S. 53.8200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.2 25 mm thick
MATERIAL
Teak wood 2nd class 10x0.25 = 0.25cum+

Priming coat
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.3 20 mm thick
MATERIAL
Teak wood 2nd class 10x0.20 = 0.20 cum+

Priming coat
LABOUR
Carpenter 2 nd class 0.8000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.4 12 mm thick
Wood-
Second class teak wood 10x0.012 = 0.12 cum+

LABOUR
Priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.26 Providing and fixing in wall lining flat pressed three layer
(medium density) particle board or graded wood Pre-
laminated one side decorative lamination and other side
balancing lamination Grade I, Type II, IS : 12823 marked,
including priming coat on unexposed arrangement and screws
etc. complete :
8.26.1 12 mm thick
MATERIAL
Particle board (three layer medium density) 12mm thick
= 10 sqm.
Add wastage @ 10% = 1 sqm.
Total = 11 sqm.
7477 Prelaminated particle board with one side decorative and sqm 11.0000
other side balancing lamination, flat pressed 3 layer & graded
(medium density) Grade I, Type II conforming to IS : 12823
(exterior grade) 12 mm thick
9977 Carriage of particle board L.S. 13.5200

9999 Sundries and screws L.S. 26.9100
Priming coat
LABOUR
7048 Rawl plug 50 mm (designation 10 no.) each 55.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.26.2 18 mm thick
MATERIAL
Particle board (three layer medium density) 18 mm thick
= 10 sqm.
Total = 11 sqm.

Priming coat
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.26.3 25 mm thick
MATERIAL
Particle board (three layer medium density) 25 mm thick
= 10 sqm.
Total = 11 sqm.

9999 Sundries and screws etc L.S. 26.9100
Priming coat
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.27 Providing and fixing specified wood frame work consisting of

battens 50x25mm fixed with rawl plug and drilling necessary
holes for rawl plug etc. including priming coat complete.
8.27.1 Kiln seasoned and chemically treated hollock wood

Details of cost for 5 no. battens of size
500cmx50mmx25mm = 31.25 cudm
MATERIAL
Hollock wood- 5x5.00x0.50x0.025 = 0.03125 cum
Total = 0.03281 cum Say 33 cudm.
2505 Hollock wood in planks 10 cudm 3.3000
LABOUR
Painting with ready mixed priming coat on ground
5x500x15 cm =3.75 sqm
9999 Labour for drilling holes, steel tape, sundries etc. L.S. 71.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 31.25 cudm.
Cost of 1 cum.
Say
8.28 Providing and fixing plywood 4 mm thick, one side decorative

veneer conforming to IS: 1328 (type- 1), for plain lining /
cladding with necessary screws, including priming coat on
unexposed surface with :
8.28.1 Decorative veneer facings of approved manufacture

MATERIAL
Teak ply wood = 10sqm.
Add for wastage @ 20% = 2 sqm.
Total = 12 sqm.
0759 Decorative plywood 4 mm sqm 12.0000
9977 Carriage of ply wood L.S. 5.4600
fixing in cement mortar 1:3 (1 cement: 3 fine sand)

LABOUR
0130 Mistry day 0.6000
9999 20mm nails without head for fixing ply L.S. 53.8200
Painting with ready mixed priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.29 Providing and fixing 4mm thick coir veneer board, ISI marked
IS : 14842, plain lining with necessary screws, priming coat on
unexposed surface etc., complete.

MATERIAL
Coir veneered board 4mm thick = 10sqm.
Add for wastage @ 20% = 2 sqm.
Total = 12 sqm.
7552 Coir veneered board 4mm thick sqm 12.0000
9977 Carriage of Coir veneered board L.S. 5.4600
fixing in cement mortar 1:3 (1 cement: 3 fine sand)

LABOUR
9999 20mm nails without head for fixing ply L.S. 53.8200
Priming coat Painting with ready mixed priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.30 Providing and fixing skirting with Pre-laminated (one side

decorative and other side balancing lamination) flat pressed 3
layer or graded particle board (medium density) Grade I, Type
II, IS :12823 marked, with necessary fixing arrangements and
screws, including drilling necessary holes for rawl plugs etc.
and priming coat on unexposed surface complete :
8.30.1 18 mm thick
Details of cost for skirting 200mm wide and 30m long
Area = 0.2x30= 6 sqm.
Area = 0.2x30= 6 sqm.
MATERIAL
Teak shade prelaminated Particle board (three layer
medium density) = 6.0 sqm.+
Add wastage @ 10% = 0.6sqm.
Total = 6.6 sqm.

9999 Labour for drilling holes L.S. 130.0000
LABOUR
For dressing and fixing particle board to skirting
9999 Sundries (Screws, sand paper) L.S. 53.8200
Painting with ready mixed priming coat at back
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 sqm.
Cost of 1 sqm.
Say
8.30.2 25 mm thick
Details of cost for skirting 200mm wide and 30m long
Area = 0.2x30= 6 sqm.
Area = 0.2x30= 6 sqm.
MATERIAL
Teak shade prelaminated Particle board (three layer
medium density) = 6.0 sqm.+
Total = 6.6 sqm.

9999 Labour for drilling holes L.S. 130.0000
LABOUR
For dressing and fixing particle board to
skirting
9999 Sundries (Screws, sand paper) L.S. 53.8200
Painting with ready mixed priming coat at back
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 sqm.
Cost of 1 sqm.
Say
8.31 Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as approved
by Engineer-in-Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per
sqm, including pointing in white cement mixed with pigment
of matching shade complete.

MATERIAL
Ceramic Glazed tiles = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
Total = 1.025 sqm
7800 Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all Sq.m. 1.0250
colours shades and designs except burgundy, bottle green,
black

12 mm thick Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement for slurry over bed @ 3.3 kg per sqm
LABOUR
9988 Sundries including carriage of cement etc L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
8.32 Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with
open grooves for linear as well as curvilinear portions of the
building , for all heights and all levels etc. including:
a) Structural analysis & design and preparation of shop

drawings for pressure equalisation or rain screen principle as
required, proper drainage of water to make it watertight
including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metallic
colour of approved shades made out of 4mm thick aluminium
composite panel material consisting of 3mm thick FR grade
mineral core sandwiched between two Aluminium sheets
(each 0.5mm thick). The aluminium composite panel cladding
sheet shall be coil coated, with Kynar 500 based PVDF /
Lumiflon based fluoropolymer resin coating of approved
colour and shade on face # 1 and polymer (Service) coating on
face # 2 as specified using stainless steel screws, nuts, bolts,
washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS
with Hot Dip Galvanised with serrations and serrated washers
to arrest the wind load movement, fasteners, SS 316 Pins and
anchor bolts of approved make in SS 316, Nylon separators to
prevent bi-metallic contacts all complete required to perform
as per specification and drawing The item includes cost of all
material & labour component, the cost of all mock ups at site,
cost of all samples of the individual components for testing in
an approved laboratory, field tests on the assembled working
curtain wall with aluminium composite panel cladding,
cleaning and protection of the curtain wall with aluminium
composite panel cladding till the handing over of the building
for occupation. Base frame work for ACP cladding is payable
under the relevant aluminium item.s The Contractor shall
provide curtain wall with aluminium composite panel
cladding, having all the performance characteristics all
complete , as per the Architectural drawings, as per item
description, as specified, as per the approved shop drawings
and as directed by the Engineer-in-Charge. However, for the
purpose of payment, only the actual area on the external face
of the curtain wall with Aluminium Composite Panel Cladding
(including width of groove) shall be measured in sqm. up to
two decimal places.

Width of the unit 1.6 m
Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm
No of Panels 1 no
Area i/c wastage @ 5% = 7.06 sqm
MATERIALS
2607 Weather Sealant - Non Staining (600 ml) each 2.0000
2608 Weather Sealant - Normal (300 ml) each 2.0000
2609 MS Brackets/Aluminium Alloy Brackets kg 10.0000
2611 EPDM Gasket in Kg (Above 60 g / m) kg 0.7000
2612 Anchor Fastener - M10 each 2.0000
2613 SS Bolt with washer of sizes for structural glazing / ACP
Cladding each 2.0000
2614 SS Screws of sizes for structural glazing / ACP Cladding
each 49.0000
2615 Protective Tape metre 7.0000
2630 Baker rod metre 5.0000
2616 GI flashing - 1.2 mm Thick kg 4.0000
2631 4 mm thick ACP sqm 7.0600
9999 Sundries L.S. 451.0000
9999 Sundries (For Fabrication) L.S. 1895.3000
9999 Sundries (For Installation) L.S. 1895.3000
9999 Sundries (Scaffolding / Loading / Unloading) L.S. 602.2500
9999 Sundries (Transportation) L.S. 473.8300
9999 Sundries (Designing charges etc.) L.S. 328.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
9.1 Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in
position with hold fast lugs or with dash fasteners of required
dia & length (hold fast lugs or dash fastener shall be paid for
separately).
9.1.1 Second class teak wood

Details of cost for Chowkhat of a door 206.75x117.5cm
MATERIAL
Superior class teakwood such as Dandeli Balarshah or Malabar
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum. = 0.036cum.+
Add for wastage @ 5% = 0.002cum.
Grand Total = 0.038cum = 38 cudm
LABOUR
0156 Carpenter (average) day 0.7200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.1.2 Sal wood

Details of cost for Chowkhat of a door 206.75x117.5cm.
MATERIAL
Salwood
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum. = 0.036cum.+
Grand Total = 0.038cum = 38cudm
1199 Sal wood in scantling 10 cudm 3.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.
Cost per cum.
Say

MATERIAL
Hollock wood
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum. = 0.036cum.+
2466 Hollock wood in scantling 10 cudm 3.8000
2504 Kiln seasoning of timber cum 0.0380
9999 Chemical treatment L.S. 8.9700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.(finished work)
Cost per cum.
Say
9.2 Providing laminated veneer lumber conforming to IS:14616

and TAD -15: 2001 (Part B) in factory made frames of doors,
windows, clerestory windows and other frames, wrought
framed and fixing in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash
fastener shall be paid for separately).

MATERIAL
Laminated veneer lumber including wastage @ 5%
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum. = 0.036cum.+
7157 Laminated veneer lumber confirming to TADS 15:1995
manufactured in factory in frames of doors, windows 10 cudm 3.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm
Cost of 1 cum
Say
9.3 Providing wood work in frames of false ceiling, partitions etc.

sawn and fixed in position with necessary stainless steel
screws etc.
9.3.1 Sal wood

Details of cost for ceiling for a room 3x3m
MATERIAL
Sal wood = 6x3.30x(50/1000)x(125/1000)=0.1238 cum. +
Cross battens 60mm centre to center
38x50mm.
6x3x(38/1000)x50/1000)=0.0342 cum.
= 0.1580 cum.+
Add for wastage @ 5% = 0.0079 cum.
= 0.1659 cum. say 166 cudm.
LABOUR
9999 Sundries screws etc. L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 158 cudm (finished work)
Cost per cum.
Say

Details of cost for ceiling for a room 3x3m
MATERIAL
Hollock wood = 6x3.30x(50/1000)x(125/1000)=0.1238 cum. +
Cross battens 60mm centre to center

38x50mm.
6x3x(38/1000)x50/1000)=0.0342 cum.
= 0.1580 cum.+
= 0.1659 cum. say 166 cudm.
LABOUR
9999 Sundries screws etc. L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 158 cudm (finished work)
Cost per cum.
Say
9.4 Extra for additional labour for circular works, such as in

frames of fan light
Details of cost for Chowkhat of a door 206.75x117.5cm
Extra Materials and labour for wastage @ 10% on quantity of
item no 9.1.1
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.4.2 Sal wood

Details of cost for Chowkhat of a door
206.75x117.5cm
item no 9.1.2
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.
Cost per cum.
Say

Details of cost for Chowkhat of a door
206.75x117.5cm.
item no 9.1.3
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36 cudm.(finished work)
Cost per cum.
Say
9.5 Providing and fixing panelled or panelled and glazed shutters

for doors, windows and clerestory windows, fixing with butt
hinges of required size with necessary screws, excluding
panelling which will be paid for separately, all complete as per
direction of Engineer-in-charge. (Note:- Butt hinges and
necessary screws shall be paid separately)
9.5.1.1 35 mm thick shutters
Code Unit Quantity
(1/3rd glazed and 2/3rd panelled) 200x

108cm = 2.16 sqm)
MATERIAL
Teak wood
Styles 4x200x10.0x3.5cm = 0.028cum+ Rails
Top rails 1x110.5x10.0x3.5cm = 0.004cum.+
Bottom rails 1x110.5x20x3.5cm = 0.008cum+
Lock rails 1x110.5x15x3.5cm = 0.006cum+
Beading 2x186.1x1.9x1.2cm = 0.001cum.
Total = 0.047 cum+
Add for wastage @ 10% = 0.005cum
Grand Total = 0.051 cum = 51 cudm
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

Details of cost for shutters of a Door (1/3rd glazed and 2/3rd
panelled) 200x108cm = 2.16 sqm)

MATERIAL
Teak wood
Styles : 4x200x10.0x3.0cm = 0.024 cum+
Top rails :1x110.5x9.5x3.0cm = 0.003cum+
Bottom rails : 1x110.5x19.7x3.0cm = 0.007cum+
Lock rails : 1x110.5x15.0x3.0cm = 0.005cum+
Beading : 2x186.1x1.9x1.2cm = 0.001 cum.
Total = 0.040 cum. +
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

Details of cost for shutters of a Door (1/3rd glazed and 2/3rd
panelled) 200x108cm = 2.16 sqm)

MATERIAL
Hollock wood
Styles 4x200x10.0x3.5cm = 0.028cum+
Rails
Bottom rails 1x110.5x20x3.5cm = 0.008cum+
Total = 0.047 cum+
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

Details of cost for shutters of a door
(1/3rd glazed and 2/3rd panelled)
200x108cm = 2.16sqm.
MATERIAL
Hollock wood
Rails
Bottom rails 1x110.5x19.7x3.0cm = 0.007cum+
Beading 2x186.1x1.9x1.2cm = 0.001cum
Total = 0.040 cum.+
Grand Total = 0.044 cum or = 44 cudm
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.5.3 Kiln seasoned selected planks of sheesham wood

Details of cost for shutters of a Door
(1/3rd glazed and 2/3rd panelled)
200x108cm = 2.16 sqm)
MATERIAL
Sheesham wood
Rails
Total = 0.047 cum+
1200 Kiln seasoned selected sheesum wood planks 10 cudm 5.1000
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

Details of cost for shutters of a door (1/3rd glazed and 2/3rd
panelled). 200x108cm = 2.16sqm.

MATERIAL
Sheesham wood
Rails
Lock rails 1x110.5x15.0x3.0cm = 0.005cum+
Bottom rails 1x110.5xl9.7x3.0cm = 0.007cum+
Beading 2x186.1xl.9xl.2cm = 0.001cum
Total = 0.040 cum.+
Grand Total = 0.044 cum or = 44 cudm"
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.6 Providing and fixing 35 mm thick factory made laminated

veneer lumber door shutter conforming to IS : 14616 and
TADS 15:2001 (Part B), fixing with butt hinges of required size
with necessary screws, all complete as per directions of
Engineer- in-charge and panelling with panels of : (Note:- Butt
hinges and necessary screws shall be paid separately)
9.6.1 12 mm thick plain grade -1, medium density flat pressed three
layer particle board FPT - I or graded wood particle board FPT-
I, IS : 3087 marked, bonded with BWP type synthetic resin
adhesive as per IS : 848 :

Details of cost of one shutter 220x108cm = 2.38sqm.
MATERIAL
7137 Factory made 35 mm thick shutters with laminated veneer
lumber styles rails as per TADS IS:1995 and panels of 12 mm
thick plain type-I, medium density flat pressed three layer,
graded particle board (FPT-I) as per IS:3087-1985 bonded with
BWP type synthetic resin adhesive, as per IS:848

sqm 2.3800
9977 Carriage of shutters L.S. 29.6400
Fittings :
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.6.2 12 mm thick pre-laminated particle board (decorative

lamination on both sides) grade -1, medium density flat
pressed, three layer particle board FPT- I or graded wood
particle board FPT- I, conforming to IS : 3087, bonded with
BWP type synthetic resin adhesive as per IS : 848 and pre-
laminated conforming to IS : 12823, Grade 1, Type - II
marked :

MATERIAL
thick both sides prelaminated type-I, medium density flat
pressed three layer, graded particle board (FPT-I) as per
IS:3087-1985 bonded with BWP type synthetic resin adhesive,
as per IS:848-1974 sqm 2.3800

Fittings :
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.6.3 12 mm thick one side Pre-laminated particle board
(decorative lamination on one side and other sides balancing
lamination) grade -1, medium density flat pressed, three layer
particle board FPT - I or graded wood particle board FPT-1
conforming to IS : 3087 bonded with BWP type synthetic resin
adhesive as per IS : 848 and pre-laminated conforming to IS :
12823, Grade -1, Type II marked :

MATERIAL
thick one side prelaminated type-I, and other side balancing
lamination, medium density flat pressed three layer, graded
particle board (FPT-I) as per IS:3087-1985 bonded with BWP
type synthetic resin adhesive, as per IS:848-1974

sqm 2.3800
Fittings :
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.7 Providing and fixing panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows
and clerestory windows (Area of opening for panel inserts
excluding portion inside grooves or rebates to be measured).
Panelling for panelled or panelled and glazed shutters 25 mm
to 40 mm thick :
Details of cost for shutters of a door with 2/3rd panelling
200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
Panels
4x47.2x38.65x1.6cm = 0.0117cum+
= 0.0129 cum.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say

Details of cost for shutters of a door 200x108cm = 2.16 sqm.
Panel area 4x45.1x36.55cm=0.66sqm.

MATERIAL
Hollock wood
panels 4x45.1x36.55cm = 0.0117 cum+
= 0.0129 cum = 12.90 cudm
Labour & sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.3 Ply wood 5 ply, 9 mm thick

9.7.3.1 Decorative plywood both side decorative veneer (Type - I)
conforming to IS 1328 BWR type
200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.66sqm.
MATERIAL
Plywood (9mm thick)
4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm 0.8000
9977 Carriage of Plywood L.S. 1.8200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.3.2 Decorative plywood one side decorative veneer and

commercial veneer on other face (Type 1) conforming to IS
1328 BWR Type

Details of cost for shutters of a door with 2/3rd panelling.
200x108cm = 2.16sqm.
MATERIAL
Plywood (9mm thick)
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
2481 Ply wood 5 ply with teak ply on one face and commercial ply
on
another face 9 mm thick sqm 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.4 Ply wood 7 ply, 9 mm thick

9.7.4.1 Decorative plywood one side decorative veneer and
commercial veneer on other face (Type 1) conforming to IS
1328 BWR Type

200x108cm = 2.16sqm.
MATERIAL
Ply wood (9mm thick)
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
2483 Ply wood 7 ply with teak ply on one face and commercial ply
on another face , 9 mm thick
another face 9 mm thick sqm 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5 Particle Board 12 mm thick

9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood
particle board medium density Grade I, IS : 3087 marked

200x108cm = 2.16sqm.
MATERIAL
Particle Board 12 mm thick
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
0341 Flat pressed 3 layer particle board (medium density) Grade I : sqm 0.8000
12 mm thick
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5.2 Veneered flat pressed three layer or graded wood particle

board with commercial veneering on both sides conforming to
IS:3097, grade I

200x108cm = 2.16sqm.
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
7468 Veneered particle board with commercial veneering on both
sides 12 mm thick sqm 0.8000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5.3 Pre-laminated particle board with decorative lamination on

one side and balancing lamination on other side, Grade I, Type
II IS: 12823 marked

200x108cm = 2.16sqm.
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5.4 Pre-laminated particle board with decorative lamination on

both sides, Grade I, Type II, IS:12823 marked

200x108cm = 2.16sqm.
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
7480 Prelaminated particle board with both sides decorative sqm 0.8000
lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 12
mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.6 Coir Veneer Board (conforming to IS 14842)

9.7.6.1 12 mm thick
200x108cm = 2.16sqm.
MATERIAL
Coir veneered board 12mm thick
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.7 Float glass panes

9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm).

200x108cm = 2.16sqm.
MATERIAL
Float glass sheet of nominal thickness 4 mm
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
2405 Float glass sheet of nominal thickness 4 mm (weight not less sqm 0.8000
than 10kg/sqm).
LABOUR
0119 Glazier day 0.1500
9999 Sundries L.S. 25.4700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Details of cost for shutters of a door with 2/3 rd panelling
200x108cm = 2.16 sqm

Panel area 4x45.1x36.55cm=0.66 sqm
MATERIAL
Float glass sheet of nominal thickness 5.5 mm
4x47.2x38.65cm = 0.73sqm
Add for wastage @ 10% = 0.07sqm
Total = 0.80 sqm
2407 Float glass sheet of nominal thickness 5.0 mm.(weight not less sqm 0.8000
than 12.50 kg/sqm).
LABOUR
9999 Sundries L.S. 25.4700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm
dia. wire and 1.4mm wide aperture with matching wood
beading

Details of cost for shutters of a door with 2/3 rd panelling
200x108cm = 2.16 sqm

Panel area 4x45.1x36.55cm=0.66sqm
MATERIAL
Stainless steel wire guage
4x47.2x38.65cm = 0.73sqm
Add for wastage @ 10% = 0.07sqm
Total = 0.80 sqm
8737 Stainless steel wire guage (Grade-304) aperture 1.4mm and sqm 0.8000
0.50 mm dia wire
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.9 Providing and fixing glazed shutters for doors, windows and
clerestory windows using 4 mm thick float glass panes,
including ISI marked M.S. pressed butt hinges bright finished
of required size with necessary screws.
9.9.1 second class teak wood

9.9.1.1 35 mm thick
Details of cost for shutter of a door (glazed) 200x108cm = 2.16
sqm.
MATERIAL
Styles : 4x200x9.5x3.5cm = 0.027cum
Rails
Top & intermediate rails 2x110.5x9.5x3.5cm = 0.008cum
Lock and bottom rails 2x110.5x19.7x3.5cm = 0.015cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.
Add for wastage @ 10% = 0.005 cum
Total = 0.058 scum - 58 cudm
than 10kg/sqm).
0595 right finished or black enamelled mild steel butt hinges 10 Nos 0.6000
100x58x1.90 mm
0597 right finished or black enamelled mild steel butt 10 Nos 0.2000
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.s. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.1.2 30 mm thick
Details of cost for shutter of a door (glazed) 200x108cm = 2.16
sqm.
MATERIAL
Styles : 4x200x9.5x3.0 cm = 0.023 cum
Rails
Top & intermediate rails 2x110.5x9.5x3.0 cm = 0.006 cum
Lock and bottom rails 2x110.5x19.7x3.0 cm = 0.013 cum

Beadings-
2x186.1x1.9x1.2cm = 0.001cum
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.
Add for wastage @ 10% = 0.005 cum
Total = 0.050 cum - 50 cudm
than 10kg/sqm).
0595 right finished or black enamelled mild steel butt hinges 10 Nos 0.6000
100x58x1.90 mm
0597 right finished or black enamelled mild steel butt 10 Nos 0.2000
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

9.9.2.1 35 mm thick
Details of cost for shutters of a door (glazed)
200x108cm = 2.16 sqm.
MATERIAL
Hollock wood
Styles :
4x200x9.5x3.5cm = 0.027cum+
Rails
Top & intermediate rails
2x110.5x9.5x3.5cm = 0.008cum+
Lock and bottom rails
2x110.5x19.7x3.5cm = 0.015cum.+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.+
9999 (iii) Chemical treatment L.S. 9.1000
than 10kg/sqm).
100x58x1.90 mm 10 Nos 0.6000

0597 Bright finished or black enamelled mild steel butt
hinges50x37x1.50 mm 10 Nos 0.2000

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.2.2 30 mm thick
Details of cost for shutter of door (glazed)
2000x108cm = 2.16 sqm.
MATERIAL
Hollock wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
2x110.5x19.7x3.0cm = 0.006cum+
2x110.5x19.7x3.0cm = 0.013cum+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.+
Grand Total = 0.050 = 50 cudm
than 10kg/sqm).
100x58x1.90 mm 10 Nos 0.6000

hinges50x37x1.50 mm 10 Nos 0.2000

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.3 Kiln seasoned selected planks of sheesham wood

9.9.3.1 35 mm thick
Details of cost for shutters of a door (glazed)
200x108cm = 2.16 sqm.
MATERIAL
Sheesham wood
Styles :
4x200x9.5x3.5cm = 0.027cum+
Rails
2x110.5x9.5x3.5cm = 0.008cum+
2x110.5x19.7x3.5cm = 0.015cum.+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.+
than 10kg/sqm).
100x58x1.90 mm
0597 Bright finished or black enamelled mild steel butt 10 Nos 0.2000
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.3.2 30 mm thick
Details of cost for shutter of door (glazed) 2000x108cm = 2.16
sqm.
MATERIAL
Sheesham wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
2x110.5x19.7x3.0cm = 0.006cum+
2x110.5x19.7x3.0cm = 0.013cum+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.+
Grand Total = 0.050 = 50 cudm
than 10kg/sqm).
100x58x1.90 mm
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.10 Providing and fixing factory made laminated veneer lumber

glazed shutter conforming to IS: 14616 and TADS 15:2001
(Part B), using 4 mm thick float glass panes for doors,
windows and clerestory windows, fixing with butt hinges of
required size with necessary screws, all as per directions of
Engineer-in-charge (Note:- Butt hinges and necessary screws
shall be paid separately)
9.10.1 30 mm thick shutters

MATERIAL
7151 Factory made 30 mm thick shutters with laminated veneer sqm 2.3800
lumber styles rails as per TADS IS:1995 and panels of sheet
glass using 10 kg/ sqm glass panes

LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.11 Extra for providing heavy sheet float glass panes instead of
ordinary float glass in glazed doors, windows and clerestory
window shutters. (Area of opening for glass panes excluding
portion inside rebate shall be measured)
9.11.1 5.0 mm thick instead of 4 mm thick.

Details of cost for one sqm.
MATERIAL
than 12.50 kg/sqm).
Deduct
2406 Float glass sheet of nominal thickness 4 mm (weight not less sqm -1.0000
than 10kg/sqm).
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
9.12 Extra for providing frosted glass panes 4 mm thick instead of

ordinary float glass panes 4 mm thick in doors, windows and
clerestory window shutters. (Area of opening for glass panes
excluding portion inside rebate shall be measured).

Cost for 1 sqm.
MATERIAL
7032 Frosted glass sheet of nominal thickness 4 mm (weighing not sqm 1.0000
less than 10 kg/sqm)
Deduct
than 10kg/sqm).
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
9.13 Deduct for providing pin headed glass panes instead of

ordinary float glass panes weighing 4 mm thick in doors,
windows and clerestory windows shutters (Area of opening
for glass panes excluding portion inside rebate shall be
measured).

Cost for 1 sqm.
MATERIAL
than 10kg/sqm).
Deduct
7451 Glass sheet (Pin headed) 4 mm thick sqm 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
9.14 Extra for providing ISI marked Stainless Steel butt hinges
instead of M.S. pressed butt hinges bright finished of required
size with necessary screws. (Shutter area to be measured).

Details of cost for one door shutter of a door
200x108cm = 2.16 sqm.
MATERIAL
8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 Nos 0.6000
12817 marked
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos 0.2000
8211 Stainless steel screws 40 mm 100 Nos 0.4800

Deduct
0595 Bright finished or black enamelled mild steel butt hinges 10 Nos -0.6000
100x58x1.90 mm
hinges50x37x1.50 mm Black enamelled Iron 10 Nos -0.2000
0637 Bright finished or black enamelled mild steel screws 40 mm 100 Nos -0.4800
0640 Bright finished or black enamelled mild steel screws 20 mm 100 Nos -0.0800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16sqm.
Cost on 1 sqm.
Say
9.15 Deduct for not providing hinges in doors, windows or

clerestory window shutters with :
9.15.1 Stainless steel butt hinges with stainless steel screws :
9.15.1.1 For 2nd class teak wood and other class of wood shutters

Details of cost of fittings for shutter of size
200x108cm = 2.16 sqm.
MATERIAL
12817 marked

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.15.2 ISI marked M.S. pressed butt hinges bright finished of

required size.
9.15.2.1 For 2nd class teak wood and other class of wood shutters

Details of cost of hinges with screws for
shutters of size 200x108cm = 2.16 sqm.
MATERIAL
100x58x1.90 mm
hinges50x37x1.50 mm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16 Providing and fixing 25 mm thick shutters for cup board etc. :
9.16.1 Panelled or panelled & glazed shutters :

9.16.1.1 Second class teak wood including ISI marked anodised
aluminium butt hinges with necessary screws
Details of cost for shutters of a cup-board (half glazed and half
panelled) 200x108cm = 2.16 sqm.

MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Grand Total = 0.0403 cum or 40 cudm
than 10kg/sqm).
Fittings-
0694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 Nos 0.6000
0586 Chromium plated Brass screws 40 mm 100 Nos 0.4800
LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.1.2 Second class teak wood including iSi marked nickel plated
bright finished M.S. piano hinges with necessary screws

Details of cost for shutters of a cup-board (half glazed and half
panelled) 200x108cm = 2.16 sqm.

MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
than 10kg/sqm).
Fittings-
0608 Nickel plated mild steel piano hinges 1 mm thick 25 mm wide metre 4.0000

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.2 Glazed shutters :

9.16.2.1 Second class teak wood including ISI marked anodized
aluminium butt hinges with necessary screws
Details of cost for shutter of cup-board
2000x108cm = 2.16 sqm.
MATERIAL
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Grand Total = 0.043 cum. 43 cudm
than 10kg/sqm).

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.2.2 Second class teak wood including ISI marked nickel plated

Details of cost for shutter of cup-board
2000x108cm = 2.16 sqm.
MATERIAL
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
than 10kg/sqm).

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.17 Providing and fixing flat pressed 3 layer particle board

medium density exterior grade (Grade I) or graded wood
particle board IS : 3087 marked, to frame, backing or studding
with screws etc. complete (Frames, backing or studding to be
paid separately):
9.17.1 12 mm thick
Details of cost for 350x200cm = 7sqm.
MATERIAL
12mm thick particle board = 7.00sqm.+ Add wastage @ 5% =
0.35 sqm. Total = 7.35 sqm
0341 Flat pressed 3 layer particle board (medium density) Grade I : sqm 7.3500
12 mm thick
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm.
Cost of 1 sqm.
Say
9.17.2 18 mm thick
MATERIAL
18 mm thick particle board = 7.00sqm.+ Add wastage @ 5% =
0.35 sqm. Total = 7.35 sqm
7055 Flat pressed 3 layer and graded particle board (medium sqm 7.3500
density) Grade 1 conforming to IS : 3087 - 18 mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm.
Cost of 1 sqm.
Say
9.18 Providing and fixing Pre-laminated flat pressed 3 layer

(medium density) particle board or graded wood particle
board IS : 3087 marked, with one side decorative and other
side balancing lamination Grade I, Type II exterior grade IS :
12823 marked, in shelves with screws and fittings wherever
required, edges to be painted with polyurethane primer
(fittings to be paid separately).
9.18.1 18 mm thick
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
MATERIAL
18mm thick particle board
4x75x20cm = 0.60sqm.
Total = 0.63 sqm
9977 Carriage of board L.S. 0.9100

LABOUR
9999 Sundries, Painting edges & Screws L.S. 7.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost per sqm.
Say
9.18.2 25 mm thick
MATERIAL
4x75x20cm = 0.60sqm.
Total = 0.63 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost per sqm.
Say
9.20 Providing and fixing ISI marked flush door shutters conforming
to IS : 2202 (Part I) decorative type, core of block board
construction with frame of 1st class hard wood and well
matched teak 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws
MATERIAL
0713 Block board construction flush door with teak wood ply on sqm 2.2000
both faces 35 mm thick
9977 Carriage of door L.S. 29.6400
12817 marked
LABOUR
For fixing shutter and fittings
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say

MATERIAL
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated

bright finished M.S. Piano hinges IS : 3818 marked with
necessary screws

MATERIAL
Fittings-For a door 2.2x1.0m = 2.20 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
Z
9.21 Providing and fixing ISI marked flush door shutters conforming
to IS : 2202 (Part I) non-decorative type, core of block board
construction with frame of 1st class hard wood and well
matched commercial 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters:

MATERIAL
0717 Block board construction flush door with commercial ply on sqm 2.2000
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say

MATERIAL
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.21.3 25 mm thick (for cupboard) including ISI marked nickel plated


. MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.22 Extra for Providing and fixing flush doors with decorative
veneering instead of non decorative ISI marked flush door
shutters conforming to IS: 2202 (Part I)
9.22.1 On one side only

7307 For flush door shutters Extra for providing teak veneering on sqm 1.0000
one side instead of commercial veneering
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
9.23 Extra for providing lipping with 2nd class teak wood battens
25 mm minimum depth on all edges of flush door shutters
(over all area of door shutter to be measured).

Details of cost for 1 sqm. of door area
0752 Block board construction flush door lipping sqm of door 1.0000
area
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
9.24 Extra for providing vision panel not exceeding 0.1 sqm in all
type of flush doors (cost of glass excluded) (overall area of
door shutter to be measured):
9.24.1 Rectangular or square

0753 Square vision panel (up to 0.10 sqm) in Block board sqm of door 1.0000
construction flush door area
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
9.24.2 Circular
0754 Circular vision panel (up to 0.10 sqm) in Block board sqm of door 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush
door shutters (overall area of door shutters to be measured).
9.25.1 Decorative type door

0755 Decorative type Louvers (up to 0.20 sqm)in Block board sqm of door 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
9.26 Extra for cutting rebate in flush door shutters (Total area of
the shutter to be measured).
0757 Rebate cutting in Block board construction flush door sqm of door 1.0000
area
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
9.27 Providing and fixing wire gauge shutters using galvanized M.S.
wire gauge of average width of aperture
9.27.1 1.4 mm in both directions with wire of dia 0.63 mm, for doors,
windows and clerestory windows with hinges and necessary
screws :

9.27.1.1.1 with ISI marked M.S. pressed butt hinges bright finished of
required size Second class teak wood
Details of cost for door shutters 2.00x1.08m = 2.16 sqm.
MATERIAL
Top Rail - 1x110.5x9.5x3.5cm = 0.0036cum+
Lock and bottom rail
2x110.5x19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.0464 cum.+
Total = 0.0514 cum. Say 51.4 cudm.
Wire gauge 2x160x40cm = 1.28 sqm.+ Add wastage @ 10% =
0.13 sqm. Total = 1.41 sqm.
7029 Galvanised wire mesh of average width of aperture 1.4 mm sqm 1.4100
and nominal dia. Of wire 0.63 mm
100x58x1.90 mm
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.27.1.1.2 Kiln seasoned and chemically treated hollock wood

MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x150)x(1.2)x
(1.2)cm = 0.001 cum.
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.27.1.1.3 Kiln seasoned selected class of sheesham wood

MATERIAL
Sheesham wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x150)x(1.2)x
(1.2)cm = 0.001 cum.
Total = 0.0514 cum.
Say 51.4 cudm.
and nominal dia. of wire 0.63 mm
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.27.1.2 With ISI marked stainless steel butt hinges of required size
9.27.1.2.1 Second class teak wood

MATERIAL
Second class Teak wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
12817 marked
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

MATERIAL
Sheesham wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
12817 marked
8211 Stainless steel screws 40 mm 0.4800

8214 Stainless steel screws 20 mm 0.0800
2204 Carriage of Timber 0.0514
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

9.27.2.1 with ISI marked M.S. pressed butt hinges bright finished of
required size
MATERIAL
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail
2x110.5x19.7x3cm = 0.013 cum+

Beadings - (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total =
0.040 cum+
100x58x1.90 mm
hinges50x37x1.50 mm
0637 right finished or black enamelled mild steel screws 40 mm 0.4800
0640 right finished or black enamelled mild steel screws 20 mm 0.0800
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

MATERIAL
Hollock wood
Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail
2x110.5x19.7x3cm = 0.013 cum+

Beadings - (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total =
0.040 cum+
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
9999 Chemical treatment L..S. 7.6800
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.31 Providing and fixing wire gauge laminated veneer lumber

shutters conforming to IS : 14616, and as per TADS 15 :2001
(Part B) using galvanised wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm
as per IS :1568, for doors, windows and clerestory windows,
fixing with butt hinges of required size with necessary screws,
as per directions of Engineer-in-charge: (Note:- Butt hinges
and necessary screws shall be paid separately)

Details of cost of one shutter
220x108cm = 2.38sqm.
MATERIAL
lumber styles rails as per TADS IS:1995 and panels of
galvanised wire gauge with average width of aperture 1.4 mm
on both directions with wire of dia 0.63 mm

LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say

Details of cost of one shutter
220x108cm = 2.38sqm.
MATERIAL
lumber styles rails as per TADS IS:1995 and panels of
galvanised wire gauge with average width of aperture 1.4 mm
on both directions with wire of dia 0.63 mm

LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.40 Providing and fixing wooden moulded beading to door and

window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete :
9.40.1 2nd class teak wood

9.40.1.1 50x12 mm
Details of cost for beading of a window of size 140x110cm i.e.
500cm. long (5metre)
MATERIAL
Teak wood IInd class in planks
500x5x1.2 cm = 0.003 cum+
Painting with priming coat Area =

500(5+1.2+1.2) = 0.37 sqm
LABOUR
For plaining, fixing and making design
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost of 1 metre
Say
9.40.1.2 50 x 20 mm
Details of cost for beading of a window of size 140x110cm i.e.
500cm. long (5metre)

MATERIAL
Teak wood IInd class in planks
500x5x2.0cm = 0.005cum+

500(5+2+2) = 0.45 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost of 1 metre
Say

9.40.2.1 50x12 mm
Details of cost for beading for a window of size 140x110cm
i.e.
500cm long (5 metre)
MATERIAL
Hollock wood
500x5x1.2cm = 0.003 cum+

500(5+1.2+1.2) = 0.37 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost of 1 metre
Say
9.40.2.2 50x20 mm
Details of cost for beading for a window of size 140x110cm
i.e.
500cm long (5 metre)
MATERIAL
Hollock wood
500x50x200mm = 0.005 cum +

500(5+2+2) = 0.45 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost of 1 metre
Say
9.41 Providing and fixing plain jaffri of 35x10 mm laths placed 35

mm apart (frames to be paid separately), including fixing
50x12 mm beading complete with :

Details of cost of a jaffri 200x110cm = 2.2sqm.
MATERIAL
Teakwood IInd class
Jaffri 210x120x1.0cm = 0.025cum.+
Beading 660x5x1.2cm = 0.004cum.
Total = 0.029 cum.+
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.2 sqm.
Cost of 1 sqm.
Say
9.42 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat
pressed 3 layer or graded wood particle board medium
density grade I, IS : 3087 marked, including top cover of 6 mm
commercial ply wood conforming to IS: 303 BWR grade, nickel
plated M.S. pipe 20 mm dia ( heavy type) curtain rod with
nickel plated brackets, including fixing with 25x3 mm M.S. flat
10 cm long fixed to pelmet with hollock wood cleats of size
100 mm x 40 mm x 40 mm on both inner side of pelmet and
rawl plugs 75 mm long etc. all complete.

Details of cost for a pelmet 2m long
MATERIAL
(i) 18mm thick particle board (medium density exterior grade)
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
Total = 0.315sqm. Say 0.32 sqm.
7055 Flat pressed 3 layer and graded particle board (medium sqm 0.3200
density) Grade 1 conforming to IS : 3087 - 18 mm thick
6mm thick commercial ply wood

Top-1x1.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm. = 0.268 sqm. Say 0.27 sqm.
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 0.2700
7034 Nickle plated M.S. pipe 20 mm dia. metre 1.6500

7035 Nickle plated M.S. Brackets for curtain rod 20 mm each 2.0000
9999 M.S. flat 25x3mm and 10cm long over brackets L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 m
Cost of 1 metre
Say
9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir

veneer board ISI marked IS : 14842, including top cover of 6
mm coir veneer board, nickel plated M.S. Pipe 20 mm dia.
(heavy type) curtain rod with nickel plated brackets, including
fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with
hollock wood cleats of size 100 mm x 40 mm x 40 mm on both
inner side of pelmet and rawl plugs 75 mm long etc. all
complete.

MATERIAL
(i) 18mm thick Coir veneered board
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
6mm thick commercial ply wood
Top-1x1.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm.
Total = 0.268 sqm. Say 0.27 sqm.
9999 M.S. flat 25x3mm and 10cm long over brackets L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 m
Cost of 1 metre
Say
9.44 Extra for using veneered particle board conforming to IS 3097

Grade I, in item of pelmet 18mm thick 150mm wide.
9.44.1 Non decorative veneer on both sides

MATERIAL
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
0347 Extra for veneered particle board with Commercial veneering sqm 0.3200
on both sides
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.44.2 Particle board with decorative veneering on both sides

MATERIAL
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
0348 Extra for veneered particle board with Teak veneering on both sqm 0.3200
sides
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.45 Providing and fixing teak wood lipping of size 25x3 mm in

pelmet.
MATERIAL
7049 Teak wood lipping of size 25x3 mm in pelmets metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost of 1 metre
Say
9.46 Providing and fixing chromium plated brass curtain rod having
wall thickness of 1.25mm with two chromium plated brass
brackets fixed with C.P. brass screws and PVC sleeves etc.,
wherever necessary complete :
9.46.1 12 mm dia
Details of cost for 2m long
MATERIAL
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre 2.0000
7023 Chromium plated brackets ( curtain rods) each 2.0000

9999 C.P. brass screws L.S. 4.0300
0458 PVC sleeves for screws each 2.0000
9999 LABOUR L.S. 2.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2 metre
Cost of 1 metre
Say
9.46.2 20 mm dia
MATERIAL

9999 LABOUR L.S. 2.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2 metre
Cost of 1 metre
Say
9.46.3 25 mm dia
MATERIAL

9999 LABOUR L.S. 2.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2 metre
Cost of 1 metre
Say
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with
nickel plated brackets :
9.47.1 20 mm dia (heavy type)
MATERIAL
9999 Screws L.S. 4.0300
9999 Labour including fixing rawl plug L.S. 5.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2 metre
Cost of 1 metre
Say
9.47.2 25 mm dia (heavy type)

MATERIAL
7033 Nickel plated M.S. pipe 25mm dia metre 2.0000
9999 Screws L.S. 4.0300
9999 Labour including fixing rawl plug L.S. 5.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2 metre
Cost of 1 metre
Say
9.48 Providing and fixing M.S. grills of required pattern in frames of

windows etc. with M.S. flats, square or round bars etc.
including priming coat with approved steel primer all
complete.
9.48.1 Fixed to steel windows by welding

Grill size 90x120cm = 1.08sqm.
MATERIAL
M.S. bar 16mm dia. metre- 11x86cm = 9.46m.
@ 1.58kg/m = 14.95kg+
Total = 16.45kg. Say 0.165q
1003 Mild steel round bar above 12 mm dia quintal 0.1650
M.S. flat 25x3.15mm
2x120cm = 2.40m+
2x90cm = 1.80m+
1x120cm = 1.20m+
2x15cm = 0.30m
Total =5.70m
5.70m @ 0.63kg/m = 3.59kg+
Total = 3.95kg. Say 4 kg. or 0.04q
0.165 + 0.04 = 0.205 q = 0.0205 t
Say 0.02 tonne
9999 Sundries L.S. 26.9100
9999 Welding charges L.S. 19.7600
Priming coat:
Area=1x0.9x1.2x1=1.08 sqm
13.50.3 Rate as per Item No.13.50.3 of SH: Finishing sqm 1.0800
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 18.54 kg.
Cost for 1 kg.
Say
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.

Grill size 90x120cm = 1.08sqm.
MATERIAL
M.S. bar 16mm dia. metre- 11x86cm = 9.46m.
@ 1.58kg/m = 14.95kg+
Total = 16.45kg. Say 0.165q
M.S. flat 25x3.15mm
2x120cm = 2.40m+
2x90cm = 1.80m+
1x120cm = 1.20m+
2x15cm = 0.30m
Total =5.70m
5.70m @ 0.63kg/m = 3.59kg+
Total = 3.95kg. Say 4 kg. or 0.04q
0.165 + 0.04 = 0.205 q = 0.0205 t
Say 0.02 tonne
9999 Sundries L.S. 26.9100
9999 Welding charges L.S. 19.7600
Priming coat:
Area=1x0.9x1.2x1=1.08 sqm
13.50.3 Rate as per Item No.13.50.3 of SH:Finishing sqm 1.0800
LABOUR
9999 Fixing of rawl plugs L.S. 26.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 18.54 kg.
Cost for 1 kg.
Say
9.49 Providing and fixing expanded metal 20x60 mm strands 3.25

mm wide and 1.6mm thick for windows etc. including 62 x19
mm beading of II nd class teak wood and priming coat with
approved steel primer all complete.

Details of cost for a window of size 140x110cm =1.54sqm.
MATERIAL
Expended metal -20x60mm mesh 3.2mm wide =
1.4x1.1m =1.54sqm.+
Total = 1.69 sqm.
1015 Mild steel expanded metal 20x60 mm strands sqm 1.6900
Priming coat
Area=1.40x1.10x1.00=1.54sqm
13.50.3 Rate as per Item No.13.50.3 of SH: FINISHING sqm 1.5400
Second class teak wood beading
5mx62mmx19mm = 0.0059cum.
Add wastage @ 10% = 0.00059cum.
Total = 0.00649cum. Say 6 cudm.
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.5 Providing and fixing hard drawn steel wire fabric 75x25 mm
mesh of weight not less than 7.75 Kg per sqm to window
frames etc. including 62x19 mm beading of second class teak
wood and priming coat with approved steel primer all
complete.

MATERIAL
Hard drawn steel wire fabric -20x60mm mesh 3.2mm wide =
1.4x1.1m = 1.54sqm.+
Total = 1.69 sqm.
9977 Carriage of wire fabric L.S. 1.8200
Priming coat
Area=1.40x1.10x1.00=1.54sqm
13.50.3 Rate as per Item No.13.50.3 of SH:FINISHING sqm 1.5400
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.51 Providing and fixing fly proof galvanized M.S. wire gauge to
windows and clerestory windows using wire gauge with
average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm all complete.
9.51.1 With 2nd class teak wood beading 62X19 mm

MATERIAL
Wire gauze -20x60mm mesh 3.2mm wide =
1.4x1.1m =1.54sqm.+
Total = 1.69 sqm.
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.51.2 With 12 mm mild steel U beading

MATERIAL
Wire gauze -20x60mm mesh 3.2mm wide =
1.4x1.1m =1.54sqm.+
Total = 1.69 sqm.
7349 12 mm M.S. 'U' beading metre 5.0000
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of
weight not less than 7.75 Kg per sqm in panelled and glazed
door and window shutter instead of glass sheet 4 mm thick.

MATERIAL
than 10kg/sqm).
Difference of cost
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Extra cost for 1 sqm.
Say
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including

fixing to frame with 10 mm diameter bolts, nuts and wooden
plugs and embedding in cement concrete block 30x10x15cm
1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size).

Details of cost for 1 hold fast
MATERIAL
M.S.flat 40x5mm 40cm long @ 1.68 kg/m = 0.672 kg = 0.0067
quintal
9977 Carriage of steel L.S. 1.8200
30x10x15cm= 0.0045cum.+
Total = 0.00495cum. Say 0.005cum.
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.0050
9999 Bolts and nuts L.S. 5.4600
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
9.54 Providing beams including hoisting, fixing in position and

applying wood preservative for the unexposed surfaces, etc.
complete with :
9.54.1 Sal wood

Details of cost for a beam
450x30x15cm = 0.203cum. or 203cudm.
MATERIAL
Sal wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
Total = 207.06cudm. Say 207.1 cudm.
Priming coat (wood preservative)
13.57.1 Rate as per item no 13.57.1 SH : Finishing sqm 0.5400
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 203 cudm.
Cost of 1 cum.
Say
9.54.2 Hollock wood

Details of cost for a beam
450x30x15cm = 0.203cum. or203cudm.
MATERIAL
Hollock wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
Total = 207.06cudm. Say 207.1 cudm.
Priming coat (wood preservative)
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 203 cudm.
Cost of 1 cum.
Say
9.55 Providing and fixing ISI marked M.S. pressed butt hinges
bright finished with necessary screws etc. complete :
9.55.1 125x65x2.12 mm
Details of cost for ten hinges
MATERIAL
125x65x2.12 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.55.2 100x58x1.90 mm
MATERIAL
100x58x1.90 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.55.3 75x47x1.70 mm
MATERIAL
hinges75x47x1.70 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.55.4 50x37x1.50 mm
MATERIAL
hinges50x37x1.50 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight
butt hinges with necessary screws etc. complete :
9.56.1 125x90x4.00 mm
MATERIAL
8222 M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 10 Nos 1.0000
marked.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.56.2 100x75x3.50 mm
MATERIAL
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 10 Nos 1.0000
marked

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.56.3 75x60x3.10 mm
MATERIAL
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.56.4 50x40x2.50 mm
MATERIAL
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 10 Nos 1.0000
marked

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.57 Providing and fixing ISI marked oxidised M.S. pressed butt
hinges with necessary screws etc. complete.
9.57.1 125x65x2.12 mm
MATERIAL
0642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos 1.0000
0682 Oxidised mild steel screws 50 mm 100 Nos 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.57.2 100x58x1.90 mm
MATERIAL
0643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.57.3 75x47x1.70 mm
MATERIAL
0644 Oxidised mild steel butt hinges75x47x1.70 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.57.4 50x37x1.50 mm
MATERIAL
0645 Oxidised mild steel butt hinges50x37x1.50 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.58 Providing and fixing ISI marked oxidised M.S. pressed

Parliamentary hinges with necessary screws etc. complete :
9.58.1 150x125x27x2.80 mm
MATERIAL
0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.58.2 125x125x27x2.80 mm
MATERIAL
0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.58.3 100x125x27x2.80 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.58.4 75x100x20x2.24 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59 Providing and fixing ISI marked oxidised M.S. single acting
spring hinges with necessary screws etc. complete :
9.59.1 150 mm
MATERIAL
0650 Oxidised mild steel single acting spring hinges 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59.2 125 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59.3 100 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.60 Providing and fixing oxidised M.S. double acting spring hinges
with necessary screws etc. complete.
9.60.1 150 mm
MATERIAL
0653 Oxidised mild steel double acting spring hinges 150 mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.60.2 125 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.60.3 100 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with
nickel plating and fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm

MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say

MATERIAL
7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over metre 1.0000
all width)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say

MATERIAL
7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over metre 1.0000
all width)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say
9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts
with nuts and screws etc. complete :
9.62.1 300x16 mm
MATERIAL
0660 Oxidised mild steel sliding door bolt 300x16 mm each 10.0000
0641 Bright finished or black enamelled mild steel bolts and nuts each 40.0000
50x6 mm
9988 Carriage of materials & sundries L.S. 6.3700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.62.2 250x16 mm
MATERIAL
0661 Oxidised mild steel sliding door bolt 250x16 mm each 10.0000
0641 Bright finished or black enamelled mild steel bolts and nuts each 40.0000
50x6 mm
LABOUR
0112 Carpenter 2nd class Day 0.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black
finish, (Barrel type) with necessary screws etc. complete :
9.63.1 250x10 mm
MATERIAL
0665 Oxidised mild steel tower bolt (barrel type) 250x10 mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.63.2 200x10 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.63.3 150x10 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.63.4 100x10 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.64 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull
bolt lock conforming to IS : 7534 with necessary screws bolts,
nut and washers etc. complete.

MATERIAL
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x each 10.0000
42 mm with screws,bolts,nuts and washers complete

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.65 Providing and fixing ISi marked oxidised M.S. door latches
conforming to IS:5930 with screws etc. complete :
9.65.1 300x20x6 mm
MATERIAL
0662 Oxidised mild steel door latch 300x20x6 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.65.2 250x20x6 mm
MATERIAL
0663 Oxidised mild steel door latch 250x20x6 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.66 Providing and fixing ISI marked oxidised M.S. handles

conforming to IS:4992 with necessary screws etc. complete :
9.66.1 125 mm
MATERIAL
0668 Oxidised mild steel handles 125 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.66.2 100 mm
MATERIAL
0669 Oxidised mild steel handles 100 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.66.3 75 mm
MATERIAL
0670 Oxidised mild steel handles75 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.67 Providing and fixing oxidised M.S. hasp and staple (safety
type) conforming to IS : 363 with necessary screws etc.
complete :
9.67.1 150 mm
MATERIAL
0679 Oxidised mild steel hasps and staples (safety type) 150 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.67.2 115 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.67.3 90 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.68 Providing and fixing oxidised M.S. casement stays (straight

peg type) with necessary screws etc. complete.
9.68.1 300 mm weighing not less than 200 grams

MATERIAL
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not each 10.0000
less than 0.20 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say

MATERIAL
less than 0.15 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say

MATERIAL
less than 0.12 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.69 Providing and fixing oxidised M.S. Safety chain with necessary
fixtures for doors, (weighting not less than 450 gms)

MATERIAL
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) each 10.0000
for door
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.70 Providing and fixing IS : 12817 marked stainless steel butt

hinges with stainless steel screws etc. complete :
9.70.1 125x64x1.90 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.70.2 100X58X1.90 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.70.3 75x47x1.80 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.70.4 50x37x1.50 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.71 Providing and fixing IS : 12817 marked stainless steel butt

hinges (heavy weight) with stainless steel screws etc.
complete :
9.71.1 125x64x2.50 mm
MATERIAL
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.71.2 100x60x2.50 mm
MATERIAL
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.71.3 75x50x2.50 mm
MATERIAL
12817 marked
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.72 Providing and fixing bright finished brass butt hinges with
necessary screws etc. complete :
9.72.1 125x85x5.5 mm (heavy type)
MATERIAL
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm (0.70kg) 10 Nos 1.0000
0449 Brass screws 50 mm 100 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.2 125x70x4 mm (ordinary type)

MATERIAL
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.3 100x85x5.5 mm (heavy type)

MATERIAL
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm (0.56 kg) 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
MATERIAL
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.5 75x65x4 mm (heavy type)

MATERIAL
0384 Brass butt hinges (heavy type) : 75x65x4.0 mm(0.20 kg) 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.6 75x40x2.5 mm (ordinary type)

MATERIAL
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say

MATERIAL
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.73 Providing and fixing bright finished brass parliamentary hinges

with necessary screws etc. complete :
9.73.1 150x125x27x5 mm
MATERIAL
0385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.73.2 125x125x27x5 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.73.3 100x125x27x5 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.73.4 75x100x20x3.2 mm
MATERIAL
0388 Brass parliamentary hinges 75x100x20x3.2 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.74 Providing and fixing bright finished brass tower bolts (barrel
type) with necessary screws etc. complete :
9.74.1 250x10 mm
MATERIAL
0400 Brass tower bolt (barrel type) 250x10 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.74.2 200x10 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.74.3 150x10 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.74.4 100x10 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.75 Providing and fixing bright finished brass door latch with
9.75.1 300x16x5 mm
MATERIAL
0411 Brass door latch 300x16x5 mm (0.380 kg) each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.75.2 250x16x5 mm
MATERIAL
0412 Brass door latch 250x16x5 mm (0.350 kg) each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.76 Providing and fixing bright finished brass 100 mm mortice

latch and lock with 6 levers and a pair of lever handles of
approved quality with necessary screws etc. complete.

Details of cost for one No
MATERIAL
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a each 1.0000
pair of brass lever handles
LABOUR
9999 Sundries (screws, carriage etc.) L.S. 3.6400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say

latch with one dead bolt and a pair of lever handles of

MATERIAL
0414 Brass mortice latch 100x65mm with a pair of brass lever each 1.0000
handles
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.78 ProvidingProviding and fixing bright finished brass night latch of

approved quality including necessary screws etc. complete.

MATERIAL
0438 Brass Night latch each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.79 Providing and fixing special quality bright finished brass

cupboard or ward robe locks with four levers of approved
quality including necessary screws etc. complete.
9.79.1 40 mm
MATERIAL
2451 Brass cupboard lock 6 levers (best make of approved quality) each 1.0000
40 mm size
LABOUR
9999 Sundries & screws L.S. 3.6400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.79.2 50 mm
MATERIAL
50 mm size
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.79.3 65 mm
MATERIAL
65 mm size
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.79.4 75 mm
MATERIAL
75 mm size
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.8 Providing and fixing 50 mm bright finished brass cup board or

wardrobe knob of approved quality with necessary screws.

MATERIAL
0447 Brass cupboard knob or ward robe knob 50 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81 Providing and fixing bright finished brass handles with screws
etc. complete:
9.81.1 125 mm
MATERIAL
0408 Brass handles 125 mm with plate 175x32 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81.2 100 mm
MATERIAL
0409 Brass handles 100 mm with plate 150x32 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81.3 75 mm
MATERIAL
0410 Brass handles75 mm with plate 125x32 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.82 Providing and fixing bright finished brass hanging type floor
door stopper with necessary screws, etc. complete.

Details of cost for 10 hanging floor door stopper
MATERIAL
2455 Brass hanging type door stopper 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.83 Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI, IS :
3564, embossed on the body, door weight up to 35 kg and
door width up to 700 mm), with necessary accessories and
screws etc. complete.

MATERIAL
2456 Hydraulic door closer bottle type M.S. body with necessary each 10.0000
accessories and screws complete
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.84 Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer (having brand logo with
ISi, IS : 3564, embossed on the body, door weight up to 36 kg
to 80 kg and door width from 701 mm to 1000 mm), with
double speed adjustment with necessary accessories and

MATERIAL
7060 Hydraulic door closer tubular type Aluminium section body each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.85 Providing and fixing bright finished brass casement window
fastener with necessary screws etc. complete.
MATERIAL
0423 Brass casement window fastener Each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.86 Providing and fixing bright finished brass casement stays

(straight peg type) with necessary screws etc. complete :
9.86.1 300 mm weighing not less than 330 gms

MATERIAL
0424 Brass casement stays (straight peg type ) 300 mm weighing each 10.0000
not less than 0.33 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87 Providing and fixing bright finished brass hasp and staple
(safety type) with necessary screws etc. complete :
9.87.1 150 mm
MATERIAL
0431 Brass hasps and staples (safety type) 150 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87.2 115 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87.3 90 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.88 Providing and fixing chromium plated brass 100 mm mortice

latch and lock with 6 levers and a pair of lever handles of

MATERIAL
0558 Chromium plated Brass mortice latch and lock 100x65 mm each 1.0000
with6 levers and a pair of brass lever handles
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.89 Providing and fixing chromium plated brass night latch of

approved quality including necessary screws etc. complete.

MATERIAL
0583 Chromium plated Brass Night latch each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.90 Providing and fixing special quality chromium plated brass

cupboard locks with six levers of approved quality including
necessary screws etc. complete.
9.90.1 Size 40 mm
MATERIAL
2468 Nickled Chromium Brass cupboard lock 40 mm size each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.90.2 Size 50 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.90.3 Size 65 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.90.4 Size 75 mm
Details of cost for one
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
9.91 Providing and fixing chromium plated brass 50 mm cupboard

or wardrobe knobs with nuts complete.
MATERIAL
0584 Chromium plated Brass Wardrobe Knob 50 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.92 Providing and fixing chromium plated brass handles with

necessary screws etc. complete:
9.92.1 125 mm
MATERIAL
0555 Chromium plated Brass handles 125 mm with plate 175 x32 each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.92.2 100 mm
MATERIAL
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 each 10.0000
mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.92.3 75 mm
MATERIAL
0557 Chromium plated Brass handles 75mm with plate 125x32 mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.93 Providing and fixing chromium plated brass casement window

fastener with necessary screws etc. complete.
MATERIAL
0568 Chromium plated brass casement window fastener each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.94 Providing and fixing chromium plated brass casement stays

(straight peg type) with necessary screws etc. complete :

MATERIAL
0569 Chromium plated Brass casement stays (straight peg type ) each 10.0000
300 mm weighing not less than 0.33 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.95 Providing and fixing ISI marked aluminium butt hinges

anodised (anodic coating not less than grade AC 10 as per IS:
1868) transparent or dyed to required colour or shade with
necessary screws etc. complete:
9.95.1 125x75x4 mm

MATERIAL
0687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.2 125x63x4 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.3 100x75x4 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.4 100x63x4 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.5 100x63x3.2 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.6 75x63x4 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.7 75x63x3.2 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.95.8 75x45x3.2 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.96 Providing and fixing aluminium sliding door bolts, ISI marked
anodised (anodic coating not less than grade AC 10 as per IS :
1868), transparent or dyed to required colour or shade, with
nuts and screws etc. complete :
9.96.1 300x16 mm
MATERIAL
0696 Anodised Aluminium sliding door bolt 300x16 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.96.2 250x16 mm
MATERIAL
0697 Anodised Aluminium sliding door bolt 250x16 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.97 Providing and fixing aluminium tower bolts, ISI marked,

1868 ) transparent or dyed to required colour or shade, with
9.97.1 300x10 mm
MATERIAL
0698 Anodised Aluminium tower bolt (barrel type)300x10 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.97.2 250x10 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.97.3 200x10 mm
MATERIAL
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.97.4 150x10 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.97.5 100x10 mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.98 Providing and fixing aluminium pull bolt lock, ISI marked,
1868) transparent or dyed to required colour and shade, with
necessary screws bolts, nut and washers etc. complete.

Details of cost for 10 pull bolt lock
MATERIAL
2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 each 10.0000
mmx42 mm with screws,bolts,nuts and washers complete

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.99 Providing and fixing 50 cm long aluminium kicking plate of size

100x3.15 mm, anodised (anodic coating not less than grade
AC 10 as per IS : 1868) transparent or dyed to required colour
or shade, with necessary screws etc. complete.

MATERIAL
0706 Anodised Aluminium kicking plate 50 cm long100x3.15 mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.100 Providing and fixing aluminium handles, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade, with
9.100.1 125 mm
MATERIAL
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.100.2 100 mm
MATERIAL
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.100.3 75 mm
MATERIAL
0705 Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.101 Providing and fixing aluminium hanging floor door stopper, ISI
marked, anodised (anodic coating not less than grade AC 10
as per IS : 1868) transparent or dyed to required colour and
shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper

MATERIAL
2459 Anodised Aluminium hanging type door stopper each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.101.2 Twin rubber stopper

MATERIAL
7059 Aluminium hanging floor door stopper with twin rubber & each 10.0000
stopper
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.102 Providing and fixing aluminium casement stays, ISI marked,

1868) transparent or dyed to required colour and shade, with

MATERIAL
2465 Anodised Aluminium Casement stay 250 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say

latch and lock, ISI marked, with six levers and a pair of
1868) aluminium lever handles of approved quality with

Details of cost for 1 lock
MATERIAL
7001 Brass 100mm mortice latch and lock with6 levers without pair each 1.0000
of handles
7003 Pair of Anodised Aluminium lever handles for 100mm mortice each 1.0000
latch and lock
LABOUR
9988 Sundries including carriage of materials L.S. 4.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 lock
Say
9.104 Providing and fixing aluminium tee channels (heavy duty) with
rollers & stop end in pelmets as curtain rod.
MATERIAL
7056 Aluminium tee channel (heavy duty) with rollers and stop end metre 2.0000
9999 LABOUR L.S. 2.7300

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 metre
Cost of 1 metre
Say
9.105 Providing and fixing partition up to ceiling height consisting of
G.I. frame and required board, including providing and fixing
of frame work made of special section power pressed/ roll
form G.I. sheet with zinc coating of 120 gms/sqm(both side
inclusive), consisting of floor and ceiling channel 50mm wide
having equal flanges of 32 mm and 0.50 mm thick, fixed to the
floor and ceiling at the spacing of 610 mm centre to centre
with dash fastener of 12.5 mm dia meter 50 mm length or
suitable anchor fastener or metal screws with nylon plugs and
the studs 48 mm wide having one flange of 34 mm and other
flange 36 mm and 0.50 mm thick fixed vertically within flanges
of floor and ceiling channel and placed at a spacing of 610 mm
centre to centre by 6 mm dia bolts and nuts, including fixing
of studs along both ends of partition fixed flush to wall with
suitable anchor fastener or metal screws with nylon plugs at
spacing of 450 mm centre to centre, and fixing of boards to
both side of frame work by 25 mm long dry wall screws on
studs, floor and ceiling channels at the spacing of 300 mm
centre to centre. The boards are to be fixed to the frame work
with joints staggered to avoid through cracks, M.S. fixing
channel of 99 mm width (0.9 mm thick having two flanges of
9.5 mm each) to be provided at the horizontal joints of two
boards, fixed to the studs using metal to metal flat head
screws, including jointing and finishing to a flush finish with
recommended jointing compound, jointing tape, angle beads
at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two
coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete.
9.105.1 75 mm overall thickness partition with 12.5 mm thick double

skin fire rated Glass Reinforced Gypsum (GRG) plaster board
conforming to IS: 2095: part 3 (Board with BIS certification
marks)

Details of cost for 6.00x3.65m = 21.90 sqm
(Partition Panel)
MATERIAL
7366 Glass reinforced Gypsum (GRG) plaster board 12.5 mm thick sqm 43.8000
confirming to IS 2095 (Part 3):1996
2x6.00x3.65=43.80sqm
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section metre 12.0000
of size 50x32 mm
50mm floor and ceiling channel 2x6.00 =12m
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 metre 40.1500
mm
48mm stud-72x34x36x0.5mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
7020 All drive screws ( for gypsum board) 100 Nos 3.9200
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
7388 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each 22.0000
bolt
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
0869 Plaster of Paris kilogram 19.2700
(88/100)x21.9 = 19.27
0763 Glue kilogram 4.8200
(22/100)x21.90=4.82
7018 Joint tape roll roll 0.5840
(120m roll) (300/100)x21.90/120 = 0.584 Nos
7021 Primer ( for gypsum board) litre 7.8800
(36/100)x21.90 = 7.88 litre
1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round 10 Nos 4.4000
head with slots
11x2x2=44
1211 G.I. plain washer for seam bolts 100 Nos 0.4400
9977 Sundries carriage L.S. 52.0000
9999 Sundries scaffolding L.S. 130.0000
Labour for 21.90 sqm.
0.3x21.90=6.57
0.13x21.90=2.847
0.05x21.90=1.095
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
9.105.2 75mm overall thickness partition with 12.5 mm thick double

skin tapered edged plain Gypsum plaster board conforming to
IS: 2095: (part I): 2011 (Board with BIS certification marks)

(Partition Panel)
MATERIAL
7009 12.5 mm thick tapered edge gypsum plain board confirming sqm 43.8000
to IS 2095 (Part 1):2011
2x6.00x3.65=43.80sqm
of size 50x32 mm
mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
7020 All drive screws ( for gypsum board)
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392 100 Nos 3.9200
bolt
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
head with slots
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
0.05x21.90=1.095
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
9.105.3 66mm overall thickness Partition with 8mm thick double skin
Calcium Silicate Board made with Calcareous & Siliceous
materials reinforced with cellulose fibre manufactured
through autoclaving process with Compressive Strength 225
kg/sq.cm, Bending Strength 100 kg./ sq.cm

Details of cost for 6.00x3.65 = 21.9 sqm
(Partition Panel)
MATERIAL
8699 8 mm thick tapered edge calcium silicate board . sqm 43.8000
2x6.00x3.65=43.80sqm
of size 50x32 mm
mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
bolt
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
head with slots
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
0.05x21.90=1.095
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
9.105.4 66mm overall thickness partition using 8mm thick double skin
multipurpose cement board reinforced with cellulose fibre
manufactured through autoclaving process (High pressure
steam cured) as per IS : 14862 with suitable fibre cement
screws

Details of cost for 6.00x3.65 = 21.9 sqm
(Partition Panel)
MATERIAL
0237 Multi purpose fibre (high impact poly propylene reinforced) sqm 43.8000
cement board 8mm thick.
2x6.00x3.65=43.80sqm
of size 50x32 mm
mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
bolt
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
head with slots
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
0.05x21.90=1.095
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
9.105.5 66 mm overall thickness partition using 8 mm thick double

skin multipurpose cement bonded wood particle board
manufactured as per IS: 14276 with suitable cement bonded
board screws

MATERIAL:
0243 Multipurpose cement bonded wood particle board 8 mm thick sqm 43.8000
of size 50x32 mm
2x6.00 =12m
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 metre 40.1500
mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
7020 All drive screws ( for gypsum board)
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392 100 nos 3.9200
bolt
[(6.00/0.61)+1]x2=22
7048 Rawl plug 50 mm (designation 10 nos)
[(3.65/0.45)+1]x2= 18 each 18.0000
0869 Plaster of Paris
(88/100)x21.9 = 19.27 kg 19.2700
0763 Glue
(22/100)x21.90=4.82 kg 4.8200
7018 Joint tape roll
(120m roll) (300/100)x21.90/120 = 0.584 No roll 0.5840
7021 Primer ( for gypsum board
(36/100x21.90 = 7.88 litre litre 7.8800
head with slots
11x2x2=44 nos=4.40 tens
1211 G.I. plain washer for seam bolts
=0 .44 hundreds 100 Nos 0.4400
9999 Sundries carriage L.S 52.0000
9999 Sundries scaffolding L.S 130.0000
0111 Carpenter 1 st class day 6.5700
0.3x21.90
0.13x21.90
0.05x21.90
0.35x21.90
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 21.90 sqm
Cost of 1 sqm
Say
9.106 Providing and fixing PTMT handles with necessary screws etc.
complete.
9.106.1 125x34x24 mm weighing not less than 23 gms
Details of cost for ten Nos.
MATERIAL
7512 PTMT handle 125x34x24mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say

MATERIAL
7513 PTMT handle 150x34x24mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.107 Providing and fixing PTMT Butt hinges with necessary screws
etc. complete.
9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod
weighing not less than 34 gms
MATERIAL
7514 PTMT butt hinges 75x60x10mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod

MATERIAL
7515 PTMT butt hinges 100x75x10mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece
rod inside and necessary screws etc., complete.
MATERIAL
7516 PTMT Tower bolt 152x42x18mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say

MATERIAL
7517 PTMT Tower bolt 202x42x18mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.109 Providing and fixing PTMT door catcher of length 72 mm and
dia. of 42 mm with suitable washers weighing not less than 33
gms

MATERIAL
7518 PTMT door catcher 72x42mm each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.11 Providing and fixing Bamboo jaffery/ fencing consisting of

superior quality 25mm dia (Average) half cut bamboo placed
vertically and fixed together with three numbers horizontal
running members of hollock wood in scantling of section
50X25 mm, fixed with nails and G.I wire on existing support
complete as per direction of Engineer-in-charge.

Details of cost for a bamboo jaffery of size
1.00m x 2.10m =2.10 sqm
MATERIAL
Bamboo 25mm of 100/ 2.50 = 40 nos
Half cut off = 40/2 .=20 nos. x 2.10 = 42.00m
Add wastage @ 15% = 6.30 m
Total = 48.30m
Rate of Bamboo 25 mm dia 2.5 metre long
for one score i.e. 20nos is Rs. 192
for 48.30m qty 48.30 /( 2.5 x 20) = 0.966
0305 Bamboo 25 mm dia 2.5 metre long score 0.9660
9977 Carriage of Bamboo L.S. 4.8300
3 nos. (1.00 x 0.05 x 0.05) = 0.00375 cum
Add wastage @ 5% = 0.00019 cum
Total = 0.00394 cum or 3.94 cudm
9999 Nails and wire L.S. 20.2500
LABOUR
9999 Sundries L.S. 10.0500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.10 sqm
Cost for 1 sqm
Say
9.111 Providing and fixing wooden moulded corner beading of

triangular shape to the junction of panelling etc. with iron
screws, plugs and priming coat on unexposed surface etc.
complete 2nd class teak wood.
9.111.1 50x50 mm (base and height)

Details of cost for beading = 5.00 m
MATERIAL
Teak wood 2nd class in planks
500 x 5 x 5 mm / 2 = 0.000625 cum +
Add wastage @ 10% = 0.00063.
Total = 0.00688 cum say 6.88 cudm
Priming coat
Area 5.0 x (.05 +.05) = 0.50 sqm
LABOUR
For plaining, fixing & making design
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost for 1 metre
Say
9.112 Providing and fixing 2nd class teak wood lipping/ moulded
beading or taj beading of size 18X5 mm fixed with wooden
adhesive of approved quality and screws/nails on the edges of
the Pre-laminated particle board as per direction of Engineer-
in-charge.

MATERIAL
8719 2nd class teak wood lipping/ moulded beading or Taj beading metre 10.0000
of size 18X5mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
9.113 Providing and fixing bright finished 100 mm mortice lock with
6 levers without pair of handles of approved quality for
aluminium door, with necessary screws etc complete as per
direction of Engineer- in- charge.

Details of cost for 1 no.
8716 100 mm mortice lock with 6 levers for aluminium door. each 1.0000
LABOUR
9999 Sundries( screws, carriage etc) L.S. 2.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no
Say
9.114 Providing and fixing magnetic catcher of approved quality in

cupboard / ward robe shutters, including fixing with necessary
9.114.1 Triple strip vertical type

MATERIAL
8714 Magnetic catcher triple strip vertical type. each 1.0000
9999 Sundries including screws and fixing charges. L.S. 2.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 No.
Say
9.114.2 Double strip (horizontal type)

MATERIAL
8715 Magnetic catcher double strip horizontal type. each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 No.
Say
9.115 Providing and fixing powder coated telescopic drawer

channels 300 mm long with necessary screws etc. complete as
per directions of Engineer- in-charge.

Details of cost for 10 sets.
MATERIAL
8703 Telescopic drawer channels 300mm long . set 10.0000
9977 CARRIAGE L.S. 19.5000
9999 Sundries including screws and fixing
charges. L.S. 100.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sets
Cost for 1 set
Say
9.116 Providing and fixing sliding arrangement in racks/

cupboards/cabinets shutter by with stainless steel rollers to
run inside C or E aluminium channel section (The payment of
C or E channel shall be made separately)

Details of cost for 1 No.
MATERIAL
8704 Stainless steel roller for sliding arrangement in racks/ each 1.0000
cupboards/ cabinets shutter .
9999 Labour for fixing L.S. 1.0400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 No.
Say
9.117 Providing and fixing factory made uPVC door frame made of
uPVC extruded sections having an overall dimension as below
(tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm),
corners of the door frame to be Jointed with galvanized
brackets and stainless steel screws, joints mitred and Plastic
welded. The hinge side vertical of the frames reinforced by
galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1
specification and direction of Engineer- in-charge
9.117.1 Extruded section profile size 48x40 mm

MATERIAL
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC metre 5.0000
extruded sections in white, grey or wooden finish
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metre
Cost for 1 metre
Say
Y
9.117.2 Extruded section profile size 42x50 mm
MATERIAL
8705 50mmX42mmX2mm thick Factory made door frame of PVC metre 5.0000
extruded sections in white, grey or wooden finish
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metre
Cost for 1 metre
Say
9.118 Providing and fixing to existing door frames.

9.118.1 24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.
The styles and rails mitred and joint at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The styles of
the shutter reinforced by inserting galvanised M.S. tube of
size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock
rail made up of 'H' section, a uPVC hollow section of size
100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the
shutter styles by means of plastic/galvanised M.S. 'U' cleats.
The shutter frame filled with a uPVC multi- chambered single
panel of size not less than 620 mm, having over all thickness
of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S. rod and fastened with nuts
and washers, complete as per manufacturer's specification
and direction of Engineer-in-charge. (For W.C. and bathroom
door shutter).

Detail of cost for one door shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8001 24 mm thick Factory made shutters with frame, rails and sqm 2.3800
panels of PVC extruded sections in white, grey or wooden
finish
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow section of
size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with
inbuilt decorative moulding edging on one side. The styles and
rails mitred and joint at the corners by means of M.S.
galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws. The styles of the
shutter reinforced by inserting galvanised M.S. tube of size
25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail
made up of 'H' section, a uPVC hollow section of size 100x30
mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter
styles by means of plastic/ galvanised M.S. 'U' cleats. The
shutter frame filled with a uPVC multi-chambered single panel
of size not less than 620 mm, having over all thickness of 20
mm and 1 mm (± 0.1 mm) wall thickness . The panels filled
vertically and tie bar at two places by inserting horizontally 6
mm galvanised M.S. rod and fastened with nuts and washers,
complete as per manufacturer's specification and direction of
Engineer-in-charge.

MATERIAL
8002 30 mm thick Factory made shutters with frame, rails and sqm 2.3800
panels of PVC extruded sections in white, grey or wooden
finish
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.118.3 25 mm thick PVC flush door shutters made out of a one piece
Multi chamber extruded PVC section of the size of 762 mm X
25 mm or less as per requirement with an average wall
thickness of 1 mm (± 0.3 mm). PVC foam end cap of size
23x10 mm are provided on both vertical edges to ensure the
overall thickness of 25 mm. M.S. tube having dimensions 19
mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the
hinge side of the door. Core of the door shutter should be
filled with High Density Polyurethane foam. The Top & Bottom
edges of the shutter are covered with an end-cap of the size
25 mm X 11 mm. Door shutter shall be reinforced with special
polymeric reinforcements as per manufacturer's specification
and direction of Engineer-in-charge to take up necessary
hardware and fixtures. Stickers indicating the locations of
hardware will be pasted at appropriate places.

MATERIAL
8706 25mm thick factory made PVC flash door shutter i/c carriage. sqm 2.3800
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.119 Providing and fixing factory made P.V.C. door frame of size
50x47 mm with a wall thickness of 5 mm, made out of
extruded 5mm rigid PVC foam sheet, mitred at corners and
joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S.
square tube, the vertical door frame profiles to be reinforced
with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber
gasket weather seal to be provided through out the frame.
The door frame to be fixed to the wall using M.S. screws of
65/100 mm size, complete as per manufacturer's specification
and direction of Engineer-in-charge.

Details of cost for one door frame of 5 metre
MATERIAL
8011 Factory made door frame PVC extruded sheet i/c carriage metre 5.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 metre
Say
9.12 Providing and fixing factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19 mm x 19 mm for styles and 15x15 mm
for top & bottom rails. M.S. frame shall have a coat of steel
primers of approved make and manufacture. M.S. frame
covered with 5 mm thick heat moulded PVC 'C' channel of size
30 mm thickness, 70 mm width out of which 50 mm shall be
flat and 20 mm shall be tapered in 45 degree angle on both
side forming styles and 5 mm thick, 95 mm wide PVC sheet
out of which 75mm shall be flat and 20 mm shall be tapered
in 45 degree on the inner side to form top and bottom rail and
115 mm wide PVC sheet out of which 75 mm shall be flat and
20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel.
10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be
provided as gap insert for top rail & bottom rail, panelling of 5
mm thick both side PVC sheet to be fitted in the M.S. frame
welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)
thick x 15 mm wide PVC sheet beading on inner side, and
joined together with solvent cement adhesive. An additional 5
mm thick PVC strip of 20 mm width is to be stuck on the
interior side of the 'C' Channel using PVC solvent adhesive etc.
complete as per direction of Engineer-in-charge,
manufacturer's specification & drawing.
9.120.1 30 mm thick plain PVC door shutters

Details of cost for one door shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8003 Factory made PVC rigid foam panelled shutter i/c carriage sqm 2.3800
8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 Nos 0.4000
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.120.2 30 mm thick pre laminated PVC door shutters

MATERIAL
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020
i/c carriage sqm 2.3800

LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.121 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door
Frames of cross-section 90 mm x 45 mm having single rebate
of 32 mm x 15 mm to receive shutter of 30 mm thickness. The
laminate shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame
laminate shall be 2mm thick and shall be filled with suitable
wooden block in all the three legs. The frame shall be covered
with fibre glass from all sides. M.S. stay shall be provided at
the bottom to steady the frame.
MATERIAL
8707 Factory made glass reinforced plastic door frame 90x45 mm metre 5.0000
i/c carriage.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 metre
Say
9.122 Providing and fixing to existing door frames.

9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door
shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP laminate for
forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for
fixing of fittings, cast monolithically with 5 mm thick FRP
laminate for panels conforming to IS: 14856, including fixing
to frames.

Details of cost for one door shutter
2.20x1.08m = 2.38 sqm
MATERIAL
8708 30 mm thick factory made glass fibre reinforced plastic panel sqm 2.3800
door shutter
i/c carriage.
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door

shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3
mm thick FRP laminate all around, with suitable wooden
blocks inside at required places for fixing of fittings and
polyurethane foam (PUF)/Polystyrene foam to be used as
filler material throughout the hollow panel, casted
monolithically with testing parameters of F.R.P. laminate
conforming to table - 3 of IS: 14856, complete as per direction
of Engineer-in-charge.

MATERIAL
8730 30 mm thick factory made glass fibre reinforced plastic flush sqm 2.3800
door shutter
i/c carriage.
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.123 Providing and fixing factory made door frame (single rebate)
made out of single piece extruded solid PVC foam profile with
homogenous fine cellular structure having smooth outer
integral skin having 62 mm width & 32 mm thickness, frame
will be mitred & Jointed with self driven self tapping screws of
size 38 mm x 4 mm & PVC solvent cement, including fixing the
frame to wall with suitable dia & length anchor fastener as
per manufacturer's specification and direction of Engineer-in-
charge.

MATERIAL
8710 Factory made solid PVC door frame 60 x 30mm metre 5.0000
i/c carriage.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 meter
Say
9.124 Providing and fixing factory made 30 mm thick door shutter
made of solid PVC foam profile. The styles & rails shall be of
size 75 mm x 30 mm having wall thickness 5 mm. The styles,
top & bottom rails shall have one side wall thickness of 15 mm
integrally extruded on the hinge side of the profile for better
screw holding power. The styles and rails shall be reinforced
with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with
primer , all four corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (push fit type) will be set
inside the styles and the rails with a cavity, to receive single
piece extruded 5mm PVC sheet as panel. The styles and rails
will be mitred cut and joint with the help of PVC solvent
cement & self driven self tapping screws. Single piece
extruded solid PVC lock rail of size 100 mm x 30 mm with wall
thickness 5 mm & 15 mm integrally extruded in the middle of
the lock rail & fixed with styles with the help of PVC solvent
cement & self driven self tapping screws of size 100mm x 8
mm complete as per manufacturer's specifications and
direction of Engineer-in-charge.
9.124.1 Non decorative finish

MATERIAL
8712 30 mm thick factory made solid PVC profile panelled door sqm 2.3800
single piece extruded profile non decorative finish.
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.124.2 Decorative finish (both side wood grained finish)

MATERIAL
8709 30 mm thick factory made solid PVC profile panelled door sqm 2.3800
single piece extruded profile decorative finish (wood grain
printed on both side)
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.125 Providing and fixing PVC rigid foam sheet 1 mm thick on

existing door shutters (bathroom and W.C. doors) using
synthetic rubber based adhesive.

MATERIAL
PVC rigid foam sheet 1mm thick = 0.30 sqm
Add wastage @ 10% = 0.03 sqm
8006 Factory made PVC rigid foam sheet 1mm thick sqm 0.3300
PVC rigid foam sheet1mm thick =
0.30 sqm + Add wastage @ 10% = 0.03 sqm.
Total = 0.33 sqm
9999 Rubber adhesive L.S. 21.8400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.30 sqm
Cost of 1 sqm
Say
9.126 Providing and fixing 12 mm thick panelling or panelling and

glazing in panelled or panelled and glazed shutters for doors,
windows and clerestory windows (area of opening for panel
inserts excluding portion inside grooves or rebates to be
measured). Panelling for panelled or panelled and glazed
shutters 25 mm to 40 mm thick.
9.126.1 Marine plywood conforming to IS: 710

200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm =0.66sqm.
MATERIAL
Plywood
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
8724 12mm thick marine plywood conforming to IS:710 sqm 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.126.2 Fire retardant plywood conforming to IS: 5509

Code Fire retardant plywood conforming to IS: 5509 Unit Quantity
200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm =0.66sqm.
MATERIAL
Plywood 4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
8725 12mm thick fire retardant plywood conforming to IS: 5509. sqm 0.8000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.127 Providing & Fixing decorative high pressure laminated sheet

of plain / wood grain in gloss / matt/ suede finish with high
density protective surface layer and reverse side of adhesive
bonding quality conforming to IS : 2046 Type S, including cost
of adhesive of approved quality.
9.127.1 1.5 mm thick

MATERIAL
Decorative laminate = 5.00 sqm
Total = 5.50 sqm
8726 1.5mm thick decorative laminated sheet sqm 5.5000
9999 Adhesive L.S. 195.0000
LABOUR
9999 Sundries i/c nails etc. L.S. 52.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 5.00 sqm
Cost for 1 sqm
Say
9.127.2 1.0 mm thick

MATERIAL
Decorative laminate = 5.00 sqm
Total = 5.50 sqm
8727 1.0mm thick decorative laminated sheet sqm 5.5000
9999 Adhesive L.S. 195.0000
LABOUR
9999 Sundries i/c nails etc. L.S. 52.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 5.00 sqm
Cost for 1 sqm
Say
9.128 Providing and fixing factory made Fiberglass Reinforced
plastics (F.R.P.) chajja 4 mm thick of required colour, size and
design made by Resin Transfer Moulding (RTM) Machine
Technology, resulting in void free compact laminate in single
piece, having smooth gradual slope curvature for easy
drainage of water and duly reinforced by 2 nos vertically and
1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built
hole for grouting on the existing wall along with the 50 mm
flanges duly inserted and sealed in the wall complete in one
single piece casted monolithically, including all necessary
fittings . The FRP Chajja should be manufactured using
unsaturated Polyester resin as per IS: 6746, duly reinforced
with fibre glass chopped strand mat (CSM) as per IS: 11551
complete with protective Gel coat U/V coating on Top for
complete resistance from the extreme of temperature,
weather & sunlight (Only plan area of chajjas shall be
measured for making payment).

Detail of cost for a chajja 0.90 x 0.60 = 0.54 sqm
MATERIAL
8713 Fibre glass reinforced plastic chajja. including accessories sqm 0.5400
9977 Carriage L.S. 26.0000

9999 Fixing charges including sundries. L.S. 143.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.54 sqm
Cost for 1 sqm
Say
9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-
laminated flat pressed three layer particle board or graded
wood particle board IS: 12823 marked, exterior grade (Grade l
Type ll), having one side decorative lamination and other side
balancing lamination, including IInd class teak wood lipping of
25 mm wide x12 mm thick with necessary screws and bright
finished stainless steel piano hinges, complete as per direction
of the Engineer-in-Charge
Details of cost for one shutter
2.20x1.00m= 2.20sqm.
MATERIAL
7272 25 mm thick melamine faced prelaminated three layer sqm 2.2000
particle board
9977 CARRIAGE L.S. 29.6400
8678 1mm thick 35mm wide bright finished stainless steel piano metre 4.4000
hinges .
LABOUR
7271 IInd class teak wood lipping 25 mm
wide x 12 mm thick metre 7.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.13 Providing and fixing cup board shutters with 25 mm thick

veneered particle board IS : 3097 marked, exterior grade
(Grade I), of approved make, including IInd class teak wood
lipping of 25 mm wide x 12 mm thick with necessary screws
and bright finished stainless steel piano hinges, complete as
per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial

veneering on other side
Details of cost for one shutter 2.20x1.00m = 2.20sqm.
MATERIAL
7269 25 mm thick particle board sqm 2.2000
0346 Extra for veneered particle board with Teak veneering on one sqm 2.2000
side and commercial veneered on other side
9977 CARRIAGE L.S. 29.6400
8678 1mm thick 35mm wide bright finished stainless steel piano metre 4.4000
hinges .
LABOUR
7271 IInd class teak wood lipping 25 mm wide x 12 mm thick metre 7.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.130.2 With non decorative veneering on both sides

Details of cost for one shutter
2.20x1.00m= 2.20sqm.
MATERIAL
7269 25 mm thick particle board sqm 2.2000
0347 Extra for veneered particle board with Commercial veneering sqm 2.2000
on both sides
9977 CARRIAGE L.S. 29.6400
8678 1mm thick 35mm wide bright finished stainless steel piano
hinges . metre 4.4000

LABOUR
7271 IInd class teak wood lipping 25 mm wide x 12 mm thick metre 7.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.131 Providing and fixing factory made shutters of Pre-laminated
particle board flat pressed three layer or graded wood particle
board with one side decorative finish and other side balancing
lamination conforming to IS: 12823 Grade l Type ll, of
approved design, and edges sealed with water resistant paint
and lipped with aluminium 'U' type edge beading all- round
the shutter, including fixing with angle cleat, grip strip,
cadmium plated steel screws, including fixing of aluminium
hinges 100x63x4 mm etc. complete as per architectural
drawing and direction of Engineer-in-Charge (Cost of 'U'
beading and hinges will be paid for separately).
9.131.1 25 mm thick
Details of cost for 2.10sqm.
(Door size 2.1x1.00 = 2.10sqm.)
MATERIAL
Prelaminated particle board =
2.10sqm. + Add for wastage @ 5% = 0.11sqm.
Total = 2.21sqm.
7445 25 mm prelaminated flush door both side decorative sqm 2.2100
7443 Aluminium single cleat of size 30x32x3 each 4.0000
7444 Aluminium grip strip of size 50x12x2 each 8.0000
0834 Synthetic enamel paint in all shades except black or chocolate litre 0.1500
shade
9988 Carriage of materials including loading and unloading L.S. 19.5000
9999 Sundries and screws etc. L.S. 39.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.10sqm.
Cost of 1 sqm
Say
9.132 Providing and fixing aluminium U beading of required size to

Pre-laminated/flush door shutter, including fixing etc.

Details of cost for 1kg.
MATERIAL
Aluminium U beading = 1.00kg +
Add 10% wastage = 0.10
Total = 1.10kg.
7449 Aluminium U beading kilogram 1.1000
9999 Anodized 15 micron L.S. 65.0000
9999 Sundries including screws, fixing, carriage etc. L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 kg.
Say
9.133 Providing and fixing, in position concealed G.I. section for wall
panelling using board of required thickness fixed on the 'W'
profile (0.55 mm thick) having a knurled web of 51.55 mm and
two flanges of 26 mm each with lips of 10.55 mm, placed @
610 mm C/C in perimeter channel having one flange of 20 mm
and another flange of 30 mm with thickness of 0.55 mm and
web of length 27 mm. Perimeter channel is fixed on the floor
and the ceiling with the nylon sleeves @ 610 mm C/C with
fully threaded self-tapping dry wall screws. Board is fixed to
the 'W' profile with 25 mm countersunk ribbed head screws
@ 200 mm C/C., all complete as per the drawing & directions
of engineer-in-charge, the joints of the boards are finished
with specially formulated jointing compound and 48mm wide
jointing tape to provide seamless finish.
9.133.1 Tapered edge calcium silicate board made with calcareous &
siliceous materials reinforced with cellulose fibre
manufactured through autoclaving process to give stable
crystalline structure with compressive strength 225 kg/ sq.cm,
Bending strength 100 kg/sq.cm.
9.133.1.1 10mm thick

Details of cost for 3.66 m x 3.05 m = 11.16 sqm.
MATERIAL
Calcium silicate board 10mm thick =
11.16 sqm + Add wastage @ 10% = 1.12 sqm.
Total = 12.28 sqm
8700 10 mm thick calcium silicate board. sqm 12.2800
8720 Ceiling sections 0.55 mm thick having a knurled web of metre 19.6600
51.55mm and two flanges of 26mm each with lips of
10.55mm.
8721 Perimeter channel having one flange of 20mm and another metre 9.6000
flange of 30mm with thickness of 0.55mm and web of length
27mm
8722 Nylon sleeves & wooden screws (40mm) each 42.0000

8723 Counter sunk ribbed head screw 25 mm 100 Nos 1.7600
9999 Jointing compound L.S. 20.8000
9999 Sundries i/c rawl plug, scaffolding etc. L.S. 52.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
9.133.2 Multipurpose cement board reinforced with suitable fibre

cement screw.
9.133.2.1 8 mm thick cement fibre board as per IS : 14862
Details of cost for 3.66 m x 3.05 m = 11.16 sqm.
MATERIAL
Multipurpose non asbestos fibre cement board 8mm thick.=
11.16 sqm+ Add wastage @ 10% = 1.12 sqm.

Total = 12.28 sqm
0237 Multi purpose fibre (high impact poly propylene reinforced) sqm 12.2800
cement board 8mm thick.
10.55mm.
27mm.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
9.133.2.2 8 mm thick Cement bonded wood particle board as per

IS:14276
Details of cost for
3.66 m x 3.05 m =11.16 sqm
MATERIAL:
0243 Multipurpose cement bonded wood particle board 8mm thick Sqm 12.2800
11.16 + Add wastage @ 10% =1.12 sqm.

Total = 12.28 sqm
8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55 metre 19.6600
mm and two flanges of 26 mm each with lips of 10.55 mm
8721 Perimeter channel having one flange of 20 mm and another metre 9.6000
flange of 30 mm with thickness of 0.55 mm and web of length
27 mm
8722 Nylon sleeves & wooden screws (40 mm) each 42.0000
9999 Jointing compound L.S 20.8000
7018 Joint tape roll each roll 0.1900
9999 Sundries i/c rawl plug. Scaffolding etc. L.S 52.0000
9999 Carriage of materials L.S 26.0000
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 11.16 sqm
Cost of 1 sqm
Say
9.133.3 Plain Gypsum plaster board conforming to IS: 2095 Part

-1:2011 (Board with BIS certification marks)
9.133.3.1 12.5 mm thick
Details of cost for
3.66 m x 3.05 m =11.16 sqm.
MATERIAL
Plain gypsum board
12.5 mm thick.= 11.16 sqm
Total = 12.28 sqm
7009 12.5 mm thick Plain Gypsum plaster board . sqm 12.2800
10.55mm.
27mm.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
9.134 Providing and fixing wire gauge shutters using stainless steel
grade 304 wire gauge with wire of dia 0.5 mm and average
width of aperture 1.4 mm in both directions for doors,
windows and clerestory windows with necessary screws :

required size
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3.5cm = 0.0152 cum.+
Wire gauge 2x160x40cm = 1.28 sqm.+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Second class Teak wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.134.1.2.2 Kiln seasoned and chemically treated hollock ood

2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

required size
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say

2.00x1.08m = 2.16 sqm.
MATERIAL
Sheesham wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 1.41 sqm.
0.50 mm dia wire
12817 marked

LABOUR
9999 Sundries L.S. 33.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.135 Providing and fixing fly proof stainless steel grade 304 wire
gauge, to windows and clerestory windows using wire gauge
with average width of aperture 1.4 mm in both directions
with wire of dia. 0.50 mm all complete.
9.135.1 With 2nd class teak wood beading 62X19 mm

Details of cost for a window of size
140x110cm =1.54sqm.
MATERIAL
Wire gauze -20x60mm mesh 3.2mm
wide = 1.4x1.1m = 1.54sqm.+
Total = 1.69 sqm.
0.50 mm dia wire
5mx62mmx19mm =0.0059cum.
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.135.2 With 12 mm mild steel U beading

Details of cost for a window of size
140x110cm =1.54sqm.
MATERIAL
Wire gauze -20x60mm mesh 3.2mm
wide = 1.4x1.1m = 1.54sqm.+
Total = 1.69 sqm.
0.50 mm dia wire
7349 12 mm M.S. 'U' beading metre 5.0000
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.136 Providing and fixing fire resistant door frame of section 143 x
57 mm having built in rebate made out of 16 SWG G.I. sheet
(zinc coating not less than 120 gm/sqm) duly filled with
vermiculite based concrete mix, suitable for mounting 60
minutes fire rated door shutters. The frame is fitted with
intumescent fire seal strip of size 10x4 mm (minimum)
alround the frame and fixing with dash fastener of approved
size and make, including applying a coat of approved brand
fire resistant primer etc. complete as per direction of
Engineer-in-charge (Dash fastener to be paid for separately).

Details of cost for 3300/2750mm Door
(9.10 metre length)
MATERIAL
8738 Factory made door frame fire rated ( 60 minutes) made with metre 9.1000
16 SWG G.I. Sheet of section 143 mm x 57 mm duly filled with
vermiculite based concrete mix
LABOUR
9988 Sundries and carriage L.S. 4.2300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.10 metres
Cost of 1.00 metre
Say
9.137 Providing and fixing 50 mm thick glazed fire resistant door

shutters of 60 minutes fire rating conforming to IS:3614 (Part-
II), tested and certified as per laboratory approved by
Engineer-in-charge, with suitable mounting on door frame,
consisting of vertical styles, lock rail, top rail 100 mm wide,
bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc
coating not less than 120 gm/m2) duly filled FR insulation
material and fixing with necessary stainless steel ball bearing
hinges of approved make, including applying a coat of
approved fire resistant primer etc. all complete as per
direction of Engineer-in-charge (panelling to be paid for
separately).

(Door size-1710x2050 mm)
MATERIAL
8739 Fire rated door shutter made with 16 SWG G.I. sheet( 60 sqm 3.5000
minutes) without panel
LABOUR
9988 Sundries & Carriage L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.50 sqm
Cost of 1 sqm
Say
9.138 Providing and fixing glazing in fire resistant door shutters,
fixed panels & partitions etc., with G.I. beading made out of
1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²)
of size 20 x 33 mm screwed with M4 x 38 mm SS screws at
distance 75 mm from the edges and 150 mm c/c , including
applying a coat of approved fire resistant primer/powder
coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as
per NBC 2016, IS 16231 (Part 3):2016 and as per direction of
Engineer-in-charge with glass of required thickness having 60
minutes of fire resistance both integrity & radiation control
(EW60) and minimum 20 minutes of insulation (EI20). The
manufacturer have to give test report/certification of fire
glass and the glass should have the stamp showing the value
of E, EW & EI. The glass shall be tested in approved NABL
accredited lab or by any other accreditation body which
operates in accordance with ISO/IEC 17011 and accredits labs
as per ISO/IEC 17025 for testing and calibration scopes shall
be eligible. The maximum glazing size shall not be more than
1100x2200 mm (w x h) or 2.42 sqm.

(Door size 1710 mm x 2050 mm)
Glazing area = 2x0.679x1.808= 2.46sqm.
MATERIAL
8760 Glass panes of required thickness having 60 minutes of fire sqm 2.4600
resistance both integrity and radiation control (EW60) and
minimum 20 minutes of insulation (EI20)
2641 G.I. U beading of 1.6 mm thick G.I. Sheet with M4x38mm SS metre 9.9100
screws
2642 Ceramic tape 5x20 mm size metre 19.8200
LABOUR
9999 For fixing in position all complete L.S. 180.0000
9999 Sundries and carriage & Calcium Silicate Blocks L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.46 sqm
Cost of 1 sqm
Say
9.139 Providing and fixing panic bar / latch (Double point) fitted with
a single body, Trim Latch & Lock on back side of the Panic
Latch of reputed brand and manufacture to be approved by
the Engineer- in- charge, all complete.

Details of cost for 1 Nos
MATERIAL
8744 Panic Bar / latch (Double point) each 1.0000
LABOUR
9977 Sundries (screws and carriage) L.S. 3.6400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say
9.140 Providing and fixing plain lining with necessary screws/nuts &
bolts/ nails, including a coat of approved primer on one face,
and fixed on wooden /steel frame work, complete as per
direction of Engineer-in- charge (Frame work shall be paid for
separately).
9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type

MATERIAL
2413 12 mm commercial ply sqm 11.0000
Priming coat
13.50.1 Rate as per Item Number 13.50.1 of SH: Finishing sqm 10.0000
9999 Sundries and screws etc. L.S. 40.1000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a
wall thickness of 5 mm (± 0.2 mm), made out of single piece
extruded PVC profile, with mitred cut joints and joint with 2
nos of PVC bracket of size 190 mm x 100 mm long arms of
cross section size 35 x 15 mm & self driven self taping screws,
the vertical door profiles to be reinforced with 40x20 mm
M.S. rectangular tube of 0.8 mm , including providing EPDM
rubber gasket weather seal throughout the frame, including
jointing 5 mm PVC frame strip with PVC solvent cement on
the back of the profile. The door frame to be fixed to the wall
using 8 x100 mm long anchor fasteners complete, all as per
manufacturer's specification and direction of Engineer -in-
charge.

MATERIAL
8014 Factory made door frame of size 50x47mm with wall thickness meter 5.0000
5 mm made of single pieces extruded profile
LABOUR
9999 Sundries L.S. 11.6500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 metre
Say
9.142 35 mm thick factory made Solid panel PVC Door shutter, made
out of single piece extruded solid PVC profiles, 5 mm (± 0.2
mm) thick, having styles & rails (except lock rail) of size 95
mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20
mm shall be tapered (on both side), having one side thickness
of 15 mm integrally extruded on the hinge side of the profile
for better screw holding power, including reinforcing with MS
tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to
be mitered cut & joint with the help of PVC solvent cement,
self driven self tapping screws & M.S. rectangular pipes
bracket of size 190 mm X 100 mm of cross section size 35 mm
x 17 mm x 1 mm at each corner. Single piece extruded 5 mm
thick solid PVC Lock rail of size 115 mm x 35 mm, out of which
75 mm to be flat and 20 mm to be tapered at both ends,
having 15 mm solid core in middle of rail section integrally
extruded, fixing the styles & rails with the help of solvent and
self driven self tapping screws of 125 mm x 11 mm, including
providing 5 mm Single piece solid PVC extruded sheet inserted
in the door as panel, all complete as per manufacturer's
specification and direction of Engineer-in-charge.
9.142.1 Non decorative finish (matt finish)

Details of cost for of one shutter
2.20x1.08m = 2.38 sqm
MATERIAL
8735 35 mm thick factory made solid panel PVC door shutter of sqm 2.3800
single piece extruded profile non decorative finished (Matt
finished)
LABOUR
9999 Sundries L.S. 30.3500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.142.2 Decorative finish (wood grained finish)

2.20x1.08m = 2.38 sqm
MATERIAL
8736 35 mm thick factory made solid panel PVC door shutter of sqm 2.3800
single piece extruded profile decorative finished (Wood grand
finished)
LABOUR
9999 Sundries L.S. 30.3500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.143 Providing and Fixing factory made uPVC door frame, made of
uPVC extruded sections, of size 65 mm x 55 mm with wall
thickness 2.0 mm (± 0.2 mm), corners of the door frame to be
mitred cut and jointed with plastic brackets and stainless steel
screws, reinforcing hinge side vertical of the frames with PVC
profile of Size 28 mm x 30 mm having wall thickness 2 mm
(±0.2 mm), including providing & fixing 3 nos of 125 mm long
stainless steel hinges to the frame, fixing the frame with jamb
with required number & size of anchor dash fasteners, all
complete as per manufacturer's specification and direction of
Engineer-in- charge.

MATERIAL
8745 65mm x 55mm x 2mm thick Factory made door frame of PVC metre 5.0000
extruded section in white, grey or wooden finish
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 metre
Say
9.144 Providing and fixing 37 mm thick factory made PVC door
shutter, styles and rails made of PVC hollow section of size
100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with
inbuilt bead on one side, styles and rails mitered cut and joint
at the corners by means of 2 nos of plastic brackets of size 75
mm x 220 mm at each corner and stainless steel screws,
reinforcing the hinge side of style by inserting PVC profile of
size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm).
Lock rail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2
mm) will be fixed to the vertical styles. Providing with PVC
snap fit beads and panel of size 100 mm x 20 mm, and
inserting 2 nos tie bar of 6 mm dia and fastening with nuts
and washers complete, all as per manufacturer's specification
and direction of Engineer-in-charge.

Details of cost for of one shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8746 37 mm thick Factory made shutter with style, rails and panels sqm 2.3800
of PVC extruded section in white or grey finish
i/c carriage
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.145 Providing and Fixing factory made PVC door frame made of
PVC extruded sections of size 75 mm x 53 mm, having wall
thickness 2.0 mm (± 0.2 mm). Both verticals sides of the frame
reinforced with PVC profile of cross section size 28 mm x 30
mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long,
including reinforcing both ends of the top frame with PVC
profile. PVC Door Frame and PVC reinforcement profile to be
mitred cut, jointed and fusion welded together, including
providing and fixing 3 nos of 125 mm long stainless steel
hinges to frame, fixing the frame with jamb with required nos
& sizes of anchor dash fastener, all complete as per
manufacturer's specification and direction of engineer- in-
charge.

MATERIAL
8747 75mm x 53mm x 2.0mm thick Factory made door frame of metre 5.0000
PVC extruded section in white, grey or wooden finish
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 metres
Cost of 1 metre
Say
9.146 Providing and fixing 37 mm thick factory made PVC Door
shutter, styles and rails made of PVC hollow extruded printed
and laminated section having overall dimension 115 mm x 37
mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading
on one side, the styles and rails mitred cut and joint at corners
by inserting 2 nos PVC profile reinforcement of size 75 mm x
200 mm long with cross section size of 28 mm x 30 mm having
wall thickness 2 mm (± 0.2 mm). Styles, rails and
reinforcements to be fusion welded together. Only hinge side
vertical style to be reinforced with PVC profile reinforcement
in full length. Printed and laminated PVC lock rail of size 110
mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be
welded horizontally with the vertical styles after inserting PVC
profile reinforcement as in styles and rails, providing with PVC
snap fit beading, panels of 100 x 20 mm printed & laminated
and inserting 2 nos 6 mm dia bright steel rod horizontally with
both side threaded and tightened with check nuts and
washers complete, all as per manufacturer's specification and
direction of engineer-in-charge.

2.20x1.08m = 2.38 sqm
MATERIAL
8748 37 mm thick Factory made fusion welded shutter with style, sqm 2.3800
rails and panels of PVC extruded section in wooden finish.
LABOUR
9999 Sundries L.S. 20.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.147A Providing and fixing factory made uPVC white colour
casement/casement cum fixed glazed windows comprising of
uPVC multi-chambered frame, sash and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming
process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, stainless steel (SS 304 grade) friction
hinges, zinc alloy (white powder coated) casement handles,
G.I fasteners 100 x 8 mm size for fixing frame to finished wall,
plastic packers, plastic caps and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, mullion (if required) shall be also
fusion welded including drilling of holes for fixing hardware's
and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather
proof silicon sealant over backer rod of required size and of
approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately). Variation in
profile dimension in higher side shall be accepted but no extra
payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles

minus 5% tolerance in dimension i.e. in depth & width of
profile shall be acceptable.
9.147A.1 Casement window single panel with S.S. friction hinges (300 x
19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash
47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and
single glass pane glazing bead of appropriate dimension. (Area
of window up to 0.75 sqm.)

Detail of Cost for uPVC casement window
size 0.50 x 1.35 m =0.68 sqm
MATERIAL
8121 uPVC extruded (small series) casement window frame size metre 3.8900
47x50mm i/c 5% wastage
8122 uPVC extruded (small series) casement window sash/window metre 3.6800
mullion size 47x68 mm i/c 5% wastage
8125 uPVC extruded glazing bead of appropriate dimension for metre 3.4900
small series casement window Sash
Galvanized iron reinforcement for :-
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small metre 6.9700
series casement window frame, sash, mullion i/c 5% wastage
Window Frame = 3.59 M + Window Sash = 3.38 M
Total = 6.97 M
7390 EPDM Gasket for uPVC window i/c 5% wastage metre 14.5500
3995 G.I fasteners 100 x 8 mm each 8.0000
8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x each 2.0000
1.9 mm for uPVC window
8750 Zinc alloy (white powder coated) casement handle for uPVC each 1.0000
window
9999 Sundries, plastic packers, plastic caps, SS screws and carriage L.S. 170.0000
of material
LABOUR
0162 Labour for fabrication of uPVC extruded casement windows sqm 0.6800
including drilling holes, fixing of fittings & hardwares, hire
charges of drill machine and electricity charges etc.
0163 Labour for installation of uPVC extruded casement windows sqm 0.6800
including scaffolding
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.68 sqm
Cost of 1.00 sqm
Say
9.147A.2 Casement window double panels with S.S. friction hinges (300
x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash
47 x 68 mm & mullion 47 x 68 mm all having wall thickness of
1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area of window above 0.75 sqm up to 1.50 sqm).

Detail of cost for uPVC casement window
size 1.00 x 1.35 m = 1.35 sqm
MATERIAL
Mullion size 47x68 mm i/c 5% wastage

Window Sash = 7.44 M +
Window Mullion= 1.42 M
Total = 8.86 M
small series casement window Sash i/c 5% wastage
Galvanized iron reinforcement for
Window Frame = 4.64 M +

Window Mullion = 1.35 M =
Total = 12.63 M
window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.35 sqm
Cost of 1.00 sqm
Say
9.147A.3 Casement window double panels with top fixed with S.S.
friction hinges (350 x 19 x 1.9 mm) made of (small series)
frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all
having wall thickness of 1.9 ± 0.2 mm and single glazing bead
of appropriate dimension. ( Area of window up to 2.50 sqm).

size 1.20 x 1.80 m =2.16 sqm
MATERIAL
Mullion size 47x68mm i/c 5% wastage

Window Mullion = 2.52 M
Total = 9.80 M
small series casement window Sash i/c 5% wastage

Window Sash =6.68 M +
Total = 15.05 M
window
of material
LABOUR
0163 Labour for installation of uPVC extruded casement windows
including scaffolding sqm 2.1600

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm
Cost of 1.00 sqm
Say
9.147A.4 Casement window single panel with S.S. friction hinges (400 x
19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67
x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single
glazing bead / double glazing bead of appropriate dimension.
(Area of window above 0.75 sqm.)

size 0.70 x 1.35 m =0.95 sqm
MATERIAL
8126 uPVC extruded (big series) casement window frame size metre 4.3100
67x60 mm i/c 5% wastage
8128 uPVC extruded (big series) casement window sash/window metre 4.0200
8130 uPVC extruded glazing bead of appropriate dimension for big metre 3.8300
series casement window sash i/c 5% wastage
3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big metre 7.7300
series casement window frame, sash, mullion, i/c 5% wastage

Window Sash = 3.72 M
Total = 7.73 M
window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.95 sqm
Cost of 1.00 sqm
Say
9.147A.5 Casement window double panels with S.S. friction hinges (350
x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash /
mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2
mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of window above 1.50 sqm).

Detail of Cost for uPVC casement window
size 1.20 x 1.35 m =1.62 sqm.
MATERIAL
Window Mullion =1.42 M
Total = 9.13 M

Total = 13.83 M
window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
9.147A.6 Casement cum fixed panel window having both end single
casement panel, middle fixed panels and at top completely
fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made
of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion
67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and
single glazing bead/double glazing bead of appropriate
dimension. (Area of window above 3.00 sqm up to 5.00 sqm).

Detail of cost for uPVC casement cum fixed window
size 2.50 x1.60 m = 4.00 sqm.
MATERIAL
Total = 15.17 M
series casement window frame, sash, mullion, big & small
series sliding window frame i/c 5% wastage

Total = 21.90 M
7390 EPDM Gasket for uPVC window/door i/c 5% wastage metre 83.4500
window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4.00 sqm
Cost of 1.00 sqm
Say
9.147B Providing and fixing factory made uPVC white colour fixed
glazed windows/ventilators comprising of uPVC multi-
chambered frame and mullion (where ever required)
extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process
of required length (shape & size according to uPVC profile), ,
uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be
also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the
gap between frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer rod of required
size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double
glass panes and silicon sealant shall be paid separately).
Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50

mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of appropriate dimension.
(Area up to 0.75 sqm.)
Detail of cost for uPVC fixed window
size 1.20 x 0.50 m = 0.60 sqm.
MATERIAL
8121 uPVC extruded (small series) fixed window frame size metre 3.5700
47x50mm
8122 uPVC extruded (small series) fixed window mullion size 47x68 metre 0.5300
mm
small series fixed window Sash
series fixed window frame and mullion i/c 5% wastage

Total = 4.25 M
of material
LABOUR
0162 Labour for fabrication of uPVC extruded fixed windows sqm 0.6000
0163 Labour for installation of uPVC extruded fixed windows sqm 0.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm
Cost of 1.00 sqm
Say
9.147C Providing and fixing factory made uPVC white colour
casement/ Casement cum fixed glazed door comprising of
uPVC multi-chambered frame, sash and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming
profile), uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, zinc alloy (white powder coated) 3D
hinges and one handle on each side of panels along with zinc
plated mild steel multi point locking having transmission gear,
cylinder with keeps and one side key, G.I fasteners 100 x 8
mm size for fixing frame to finished wall and necessary
stainless steel screws, etc. Profile of frame & sash shall be
mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes
for fixing hardware's and drainage of water etc. After fixing
frame the gap between frame and adjacent finished wall shall
be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single /
double glass panes and silicon sealant shall be paid
separately). Variation in profile dimension in higher side shall
be accepted but no extra payment on this account shall be
made.

9.147C.1 Casement door with 3D hinges made of (big series) frame 67 x

64 mm & sash 67 x 110 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door up to 2.00 sqm).

Detail of cost for uPVC casement door
size 0.90 x 2.10 m =1.89 sqm.
MATERIAL
8127 uPVC extruded (big series) casement door frame size 67x64 metre 5.3600
mm i/c 5% wastage
8129 uPVC extruded (big series) casement door sash size 67x110 metre 6.0200
mm i/c 5% wastage
series casement door sash i/c 5% wastage
series casement window/door frame, sash, mullion, i/c 5%
wastage
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door` each 3.0000
8117 Zinc alloy (white powder coated) handles with zinc plated mild each set 1.0000
steel multi point locking having transmission gear, cylinder
with keeps and one side key for uPVC casement door
of material
LABOUR
0162 Labour for fabrication of uPVC extruded casement/fixed sqm 1.8900
windows/and door including drilling holes, fixing of fittings &
hardwares, hire charges of drill machine and electricity
charges etc.
and doors including scaffolding
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.89 sqm
Cost of 1.00 sqm
Say
9.147C.2 Casement door with top hung ventilator with 3D and S.S.
friction hinges (400 x 19 x 1.9 mm) made of (big series) frame
67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all
having wall thickness of 2.3 ±. 0.2 mm and single glazing
bead / double glazing bead of appropriate dimension.(Area of
door up to 2.50 sqm)

Detail of cost for uPVC casement door
size 0.90 x 2.70 m =2.43 sqm
MATERIAL
8127 uPVC extruded (big series) casement door frame size 67x64 metre 6.3000
mm i/c 5% wastage
8129 uPVC extruded (big series) casement door sash size 67x110 metre 6.0100
mm i/c 5% wastage
8128 uPVC extruded (big series) casement door sash/mullion size metre 3.5500
Door sash (67 mm x 80 mm) = 2.60 M +
Door mullion (67 mm x 80 mm ) = 0.95 M
Total = 3.55 M
series casement door frame, sash, mullion, i/c 5% wastage
Door Frame = 6.08 M +

Ventilator Sash =2.30 M +
Mullion =0.88 M
Total = 9.26 M
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big
series casement door sash i/c 5% wastage metre 5.7100

8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door each 3.0000
8117 Zinc alloy (white powder coated) handles with zinc plated mild each set 1.0000
steel multi point locking having transmission gear, cylinder
with keeps and one side key for uPVC casement door
window/ door
of material
LABOUR
0162 Labour for fabrication of uPVC extruded casement doors sqm 2.4300
0163 Labour for installation of uPVC extruded casement ventilator sqm 2.4300
and doors including scaffolding
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.147D Providing and fixing factory made uPVC white colour sliding
glazed window up to 1.50 m in height dimension comprising
of uPVC multi-chambered frame with in-built roller track and
sash extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll forming
profile), appropriate dimension of uPVC extruded glazing
beads and uPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (white powder coated) touch locks with hook, zinc
alloy body with single nylon rollers (weight bearing capacity to
be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to
finished wall and necessary stainless steel screws etc. Profile
of frame & sash shall be mitred cut and fusion welded at all
corners, including drilling of holes for fixing hardware's and
drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather
proof silicon sealant over backer rod of required size and of
approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes,
wire mesh and silicon sealant shall be paid separately).
Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.
Note: For uPVC frame and sash extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall be
acceptable.
9.147D.1 Two track two panels sliding window made of (small series)
frame 52 x 44 mm &sash 32 x 60 mm both having wall
thickness of 1.9 ± 0.2 mm and single glazing bead of
appropriate dimension. (Area of window up to 1.75 sqm)

Detail of cost for uPVC sliding window
size 1.20 x 1.35 m =1.62 sqm.
MATERIAL
8133 uPVC extruded (small series) 2 track sliding window frame size metre 5.3600
8137 uPVC extruded (small series) 2 track sliding window sash size metre 7.9000
8140 uPVC extruded interlock of appropriate dimension for small metre 2.6900
series sliding window sash i/c 5% wastage
small series sliding window sash i/c 5% wastage
series 2 track sliding window frame and sash i/c 5% wastage
2 Track Sliding Window

Frame = 5.06 M +
Window Sash = 7.30 M
Total = 12.36 M
8773 Wool pile/ weather pile strip for uPVC sliding window i/c 5% metre 18.4800
wastage
8751 Zinc alloy (white powder coated) touch lock with hook for each 2.0000
uPVC window
8752 Zinc alloy body with single nylon roller (weight bearing each 4.0000
capacity to be 40 Kg) for uPVC sliding window
of material
LABOUR
0162 Labour for fabrication of uPVC extruded sliding windows sqm 1.6200
0163 Labour for installation of uPVC extruded sliding windows sqm 1.6200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
9.147D.2 Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead
of appropriate dimension (Area of window up to 1.75 sqm).

size 1.20 x 1.35 m =1.62 sqm.
MATERIAL
8135 uPVC extruded (small series) 3 track sliding window frame size metre 5.0600
8137 uPVC extruded (small series) 3 track sliding window sash size metre 11.8400
8140 uPVC extruded interlock of appropriate dimension for small metre 4.0400
small series sliding window sash i/c 5% wastage
series sliding window frame and sash i/c 5% wastage
3 Track Sliding (Window

Frame = 9.52 m +
Window Sash =10.94 m)
Total = 20.46 M
wastage
uPVC window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
9.147D.3 Two track two panels sliding window made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension . (Area of window
above 1.75 sqm up to 2.50 sqm).

size 1.50 x 1.35 m =2.03sqm
MATERIAL
8134 uPVC extruded (big series) 2 track sliding window frame size metre 5.9900
8138 uPVC extruded (big series) 2 track sliding window sash size metre 8.3600
8141 uPVC extruded interlock of appropriate dimension for big metre 2.6500
series of sliding window Sash i/c 5% wastage Galvanized iron
reinforcement for :-
series sliding window frame (2 track sliding window frame i/c
5% wastage)
series sliding window sash (2 track sliding window sash i/c 5%
wastage)
wastage
uPVC window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.03 sqm
Cost of 1.00 sqm
Say
9.147D.4 Three track three panels sliding window with fly proof S.S wire
(big series) frame 116 x 45 mm & sash 46 x 62 mm both
having wall thickness of 2.3 ± 0.2 mm and single glazing
bead / double glazing bead of appropriate dimension. (Area of
window above 1.75 sqm).

size 1.80 x 1.35 m =2.43 sqm.
MATERIAL
series of sliding window Sash i/c 5% wastage
5% wastage)
wastage)
wastage
uPVC window
of material
LABOUR
0163 Labour for installation of uPVC extruded casement/ sliding sqm 2.4300
windows including scaffolding
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.147D.5 Three track three panels sliding window made of (big series)
glazing bead of appropriate dimension. (Area of window
above 1.75 sqm)

size 1.80 x 1.35 m =2.43 sqm.
MATERIAL
5% wastage)
wastage)
wastage
uPVC window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.147E Providing and fixing factory made uPVC white colour sliding
glazed window above 1.50 m in height dimension comprising
of uPVC multi-chambered frame with in-built roller track and
sash extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll forming
profile), appropriate dimension of uPVC extruded glazing
beads, uPVC extruded interlocks and uPVC extruded Inline
sash adaptor (if required), EPDM gasket, wool pile, zinc alloy
(white powder coated) handle on one side of extreme panel
along with zinc plated mild steel multi point locking having
transmission gear with keeps, zinc alloy (white powder
coated) touch lock with hook (if required for wire mesh
panel), stainless steel (SS 304 grade) body with adjustable
double nylon rollers (weight bearing capacity to be 120 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall
and necessary stainless steel screws etc. Profile of frame &
sash shall be mitred cut and fusion welded at all corners,
including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes, wire mesh
and silicon sealant shall be paid separately). Variation in
profile dimension in higher side shall be accepted but no extra

acceptable.
9.147E.1 Two track two panels sliding window made of (big series)
above 2.50 sqm up to 4.00 sqm.)

size 1.50 x 2.40 m = 3.60 sqm.
MATERIAL
5% wastage)
wastage)
wastage
8118 Zinc alloy (white powder coated) handles along with zinc each set 2.0000
plated mild steel multi point locking having transmission gear
with keeps for uPVC sliding window
8753 Stainless Steel (SS - 304) with adjustable double nylon roller each 4.0000
(weight bearing capacity to be 120 Kg) for uPVC sliding
window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.60 sqm
Cost of 1.00 sqm
Say
9.147E.2 Two track four panels sliding window made of (big series)
above 4.00 sqm up to 8.00 sqm).

size 3.00 x 2.40 m =7.20 sqm.
MATERIAL
8142 uPVC extruded inline adaptor of appropriate dimension for metre 2.4000
big series sliding window sash i/c 5% wastage
5% wastage)
wastage)
wastage
8118 Zinc alloy (white powder coated) handles along with zinc each set 2.0000
plated mild steel multi point locking having transmission gear
with keeps for uPVC sliding window
(weight bearing capacity to be 120 Kg) for uPVC sliding
window
8754 Zinc alloy (white powder coated) crescent lock for uPVC each 2.0000
sliding window
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.20 sqm
Cost of 1.00 sqm
Say
9.147F Providing and fixing factory made uPVC white colour sliding
glazed door comprising of uPVC multi- chambered frame with
in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension uPVC
extruded glazing beads, uPVC extruded interlock and uPVC
extruded Inline sash adaptor (if required), EPDM gasket, wool
pile, zinc alloy (white powder coated) handle with key on one
side of extreme panels along with zinc plated mild steel multi
point locking having transmission gear with keeps, zinc alloy
(white powder coated) crescent lock (if required), stainless
steel (SS 304 grade) body with adjustable double nylon rollers
(weight bearing capacity to be 120 kg), G.I fasteners 100 x 8
mm size for fixing frame to finished wall and necessary
stainless steel screws etc. Profile of frame & sash shall be
mitred cut and fusion welded at all corners, including drilling
of holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-
Charge. (Single / double glass panes, wire mesh and silicon
sealant shall be paid separately). Variation in profile
dimension in higher side shall be accepted but no extra
acceptable.
9.147F.1 Two track two panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 2.00 sqm up to
5.00 sqm)

Detail of cost for sliding door
size 2.00 x2.10 m = 4.20 sqm.
MATERIAL
8134 uPVC extruded (big series) 2 track sliding door frame size metre 8.6100
8143 uPVC extruded 2 track sliding door sash (big series) size metre 12.6000
series sliding door sash i/c 5% wastage
series of sliding door Sash i/c 5% wastage Galvanized iron
reinforcement for
series sliding door frame (2 track sliding door frame i/c 5%
wastage)
series sliding door sash (2 track sliding door sash i/c 5%
wastage)
7390 EPDM Gasket for uPVC door i/c 5% wastage metre 23.0800
8773 Wool pile/ weather pile strip for uPVC sliding door i/c 5% metre 29.4300
wastage
8119 Zinc alloy (white powder coated) handles with key along with each set 2.0000
zinc plated mild steel multi point locking having transmission
gear with keeps for uPVC sliding door
(weight bearing capacity to be 120 Kg) for uPVC sliding door
of material
LABOUR
0162 Labour for fabrication of uPVC extruded sliding doors sqm 4.2000
0163 Labour for installation of uPVC extruded sliding doors sqm 4.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4.20 sqm
Cost of 1.00 sqm
Say
9.147F.2 Two track four panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 8.00 sqm up to
10.00 sqm).

Detail of cost for uPVC sliding door
size 4.00 x 2.10 m = 8.40sqm.
MATERIAL
8142 uPVC extruded inline adaptor of appropriate dimension for metre 2.1000
big series sliding door sash
series of sliding door Sash
wastage)
wastage)
wastage
8754 Zinc alloy (white powder coated) crescent lock for uPVC each 2.0000
sliding door
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 8.40 sqm
Cost of 1.00 sqm
Say
9.147F.3 Three track three panels sliding door made of (big series)
thickness of 2.3 ± 0.2 mm and single glazing bead/ double
glazing bead of appropriate dimension. (Area of door above
5.00 sqm)

size 3.00 x 2.10 m = 6.30sqm.
MATERIAL
series of sliding door i/c 5% wastage
series sliding door frames (3 track sliding door frame i/c 5%
wastage)
wastage)
wastage
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.30 sqm
Cost of 1.00 sqm
Say
9.147F.4 Three track three panels sliding door with fly proof S.S wire
(big series) frame 116 x 45 mm & sash 46 x 82 mm both
having wall thickness of 2.3 ± 0.2 mm and single glazing
bead / double glazing bead of appropriate dimension. (Area of
door above 2.00 sqm up to 5.00 sqm)

size 2.00 x 2.10 m = 4.20sqm
MATERIAL
series of sliding door Sash i/c 5% wastage
wastage)
wastage)
wastage
wire mesh shutter
of material
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4.20 sqm
Cost of 1.00 sqm
Say
9.148 Providing and fixing stainless steel (SS-304 grade) friction

hinges to the side/top hung uPVC windows, of approved
quality, with necessary stainless steel screws etc. as per
9.148.1 200 x 19 x 1.9 mm

MATERIAL
8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for each 10.0000
uPVC windows
8647 Stainless steel screws 30mm x4mm. 100 Nos 0.4000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.148.2 250 x 19 x 1.9 mm

MATERIAL
uPVC windows
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.148.3 300 x 19 x 1.9 mm

MATERIAL
uPVC windows
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.148.4 350 x 19 x 1.9 mm

MATERIAL
uPVC windows
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.148.5 400 x 19 x 1.9 mm

MATERIAL
uPVC windows
8647 Stainless steal screws 30mm x4mm. 100 Nos 0.4000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.149 Providing and fixing casement handle made of zinc alloyed

(white powder coated) for uPVC casement window with

MATERIAL
windows
9999 Sundries(Screws) L.S. 3.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.15 Providing and fixing zinc alloyed (white powder coated) touch
lock for uPVC sliding window with necessary screws etc.
complete.

MATERIAL
8751 Zinc alloy (white powder coated) Touch Lock for uPVC each 10.0000
windows
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.151 Providing and fixing steel roller for uPVC sliding window with
MATERIAL
8752 Zinc alloy rollers for uPVC windows each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.152 Providing and fixing steel roller for uPVC sliding door with
MATERIAL
8753 Zinc alloy rollers for uPVC door each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.153 Providing and fixing steel (white power coated) crescent lock
for uPVC sliding window/ door with necessary screws etc.
complete.

MATERIAL
8754 Zinc alloy (white powder coated) casement lock for uPVC each 10.0000
windows
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.154 Providing and fixing frame work for partitions/ wall lining etc.
made of 50x50x1.6 mm hollow MS tube, placed along the
walls, ceiling and floor in a grid pattern with spacing @ 60 cm
centre to centre both ways (vertically & horizontally) or at
required spacing near opening, with necessary welding at
junctions and fixing the frame to wall/ ceiling/ floors with
steel dash fasteners of 8 mm dia, 75 mm long bolt, including
making provision for opening for doors, windows, electrical
conduits, switch boards etc., including providing with two
coats of approved steel primer etc. complete, all as per
direction of Engineer- in-charge.

Details of cost for
2.4x2.4 m panel=5.76m² or 58.35 Kg
MATERIAL
M.S.Pipe section @ 10.13 kg/sqm=58.35 Kg+
Add 5% wastage = 2.92 Kg
Total = 61.27 Kg
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt each 20.0000
Steel primer
5 x 2 x 2.40 x 0.05 x 4 = 4.80 sqm
LABOUR
9999 Sundries L.S. 33.5600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 58.35 kg
Cost of 1 kg
Say
9.155 Providing and fixing panelling or panelling and glazing in
panelled or panelled and glazed shutters for doors, windows
and clerestory windows ( area of opening for panel inserts
excluding portion inside grooves or rebated to be measured).
Panelling for panelled and glazed shutters 25mm to 40mm
thick: Pre- laminated with decorative lamination on both side
exterior Grade - I MDF Board 12 mm thick confirming to
IS:14587

Detail of cost for a door with 2/3rd panelling.
200 x 108 cm = 2.16 sqm
Panel area 4x45.1x36.55cm = 0.66 sqm
MATERIAL
Both side laminated 12mm thick
MDF Board 4x47.2x38.65 cm = 0.73 sqm
Adding 10% wastage = 0.07 sqm
Total= 0.80 sqm
2484 Pre-laminated with decorative lamination on both side sqm 0.8000
IS:14587
9999 Sundries (Carriage of MDF board) L.S. 1.8200

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.156 Providing and fixing Pre -laminated medium density fibre
board exterior grade (Grade-I) IS:14587:1998 marked, to
frame, backing or studding with screws etc. complete
( Frames, backing or studding to be paid separately).
9.156.1 Pre-laminated with decorative lamination on both side

IS:14587

Detail of cost for 350x200 cm = 7sqm
MATERIAL
12 mm thick both side laminated board = 7.00 sqm
Add for wastage @5% = 0.35 sqm
Total= 7.35 sqm
IS:14587

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.00 sqm.
Cost of 1 sqm.
Say
9.156.2 Pre-laminated with decorative lamination on both side

IS:14587

Detail of cost for 350x200 cm = 7 sqm
MATERIAL
18 mm thick both side laminated board = 7.00 sqm
Add for wastage @5% = 0.35 sqm
Total= 7.35 sqm
IS:14587

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.00 sqm.
Cost of 1 sqm.
Say
9.157 Providing and fixing Pre-laminated medium density fibre

board IS: 14587:1998 marked, with one side decorative
lamination other side balancing lamination Grade-I(exterior
grade) in shelves with screws and fittings wherever required,
edges to be sealed with PVC edge bending tape 2.00 mm thick
of approved brand (fittings to be paid separately).
9.157.1 Pre-laminated with decorative lamination one side and other

side balancing lamination exterior Grade - I MDF Board 18 mm
thick confirming to IS:14587

Detail of cost for 4 Nos. 75x20 cm shelves = 0.60 sqm
MATERIAL
18 mm Thick MDF Board out side laminated = 0.60 sqm
Total= 0.63 sqm
2488 Pre-laminated with decorative lamination one side and other sqm 0.6300
PVC edge bending tape 2.00 mm thick

4X0.75 =3.00 metre
2489 PVC edge bending tape 2.00 mm thick metre 3.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
9.157.2 Pre-laminated with decorative lamination one side and other


Detail of cost for 4 Nos. 75x20 cm
shelves = 0.60 sqm
MATERIAL
25 mm Thick MDF Board outside laminated = 0.60 sqm
Total= 0.63 sqm

4X 0.75 =3.00 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
9.158 Providing and fixing in wall lining medium density fibre board
IS: 14587:1998 marked, Pre-laminated one side decorative
lamination and other side balancing lamination, with
necessary fixing arrangement and screws etc. complete.
9.158.1 12 mm thick.
MATERIAL
12 mm thick MDF Board Grade-I ,one side laminated = 10.00
sqm
Add wastage @10 % = 1.00 sqm
Total= 11.00 sqm

LABOUR
7048 Rawl plug 50 mm (designation 10 nos) each 55.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
9.158.2 18 mm thick.
MATERIAL
sqm
Total= 11.00 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
9.158.3 25 mm thick.
MATERIAL
sqm
Total= 11.00 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
9.159 Providing and fixing 25mm thick pre-laminated medium

density fibre board exterior grade ( Grade-I) IS:14587:1998
marked with one side decorative and other side balancing
lamination for cupboard shutters edges to be sealed with PVC
edge bending tape 2.00 mm thick of approved brand including
ISI marked nickel plated bright finishing M.S. piano hinges
conforming to IS:3818 marked with necessary screw etc all
complete.

Details of cost for 2.20 sqm (2.20 m x 1.00 m)
MATERIAL

2x(2.20+1.00)=6.40 metre
Fitting for a door of 2.20 m x1.00 m
Total = 2( 2.20) = 4.40 metre
0608 Nickel plated bright finished mild steel piano hinges 1 mm metre 4.4000
thick 25 mm wide
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
9.16 Providing and fixing skirting with Pre-laminated medium

density fibre board exterior grade (Grade-I) conforming to IS:
14587:1998 marked, with (one side decorative and other side
balancing lamination and edges to be sealed with PVC edge
bending tape 2.00 mm thick of approved brand with
necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. all complete.
9.160.1 18 mm thick.
Detail of cost for skirting 200 mm wide & 30 m long
Area 0.20 mx30 m = 6.0 sqm
Add wastage @ 10 % = 0.60 sqm
Total = 6.60 sqm
MATERIAL

9999 Sundries (Labour for drilling hole) L.S. 130.0000
LABOUR
9999 Sundries ( screws and sand paper) L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.00 sqm.
Cost of 1 sqm.
Say
9.160.2 25 mm thick.
Detail of cost for skirting 200 mm wide & 30 m long
Area 0.20 mx30 m = 6.0 sqm
Add wastage @ 10 % = 0.60 sqm
Total = 6.60 sqm
MATERIAL

9999 Sundries (Labour for drilling hole) L.S. 130.0000
LABOUR
9999 Sundries ( screws and sand paper) L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.00 sqm.
Cost of 1 sqm.
Say
9.161 Providing and fixing fire resistant door frame of section 50 x
60 mm on horizontal side & 35 x 60 mm on vertical sides
having built in rebate made out of 1.6 mm thick GI sheet ( Zinc
coating not less than 120gm/m²) suitable for mounting 120
min Fire Rated Glazed Door Shutters. The frame shall be filled
with Mineral wool Insulation having density min 96Kg/m³ .
The frame will have a provision of G.I. Anchor fasteners 14
nos ( 5 each on vertical style & 4 on horizontal style of size
M10 x 80 ) suitable for fixing in the opening along with
Factory made Template for SS Ball Bearing Hinges of Size
100x89x3mm for fixing of fire rated glazed shutter . The frame
shall be finished with a approved fire resistant primer or
Powder coating of not less than 30 micron in desired shade as
per the directions of Engineer - in- charge . (Cost of SS ball
bearing hinges is excluded).

Details of cost for 5.81 metre (2.05+1.71+2.05) (Door size-
1710 x 2050 mm)

MATERIAL:
8017 Fire Rated door Frame made with 1.6 mm thick G.I. Sheet metre 5.8100
(120 minutes)
LABOUR:
9999 Sundries and carriage ( Fasteners, sims, Hole Plugs etc) L.S. 250.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.81 metre
Cost of 1 metre
Say
9.162 Providing and fixing 60 mm thick glazed fire resistant door
shutters of 120 min Fire Rating confirming to IS:3614 (Part II)
or EN1634-1:1999, tested and certified as per laboratory
approved by Engineer-in-charge, with suitable mounting on
door frame, consisting of vertical styles, top rail & side rail 60
mm x 60 mm wide and bottom rail of 110 mm x 60 mm made
out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/m²) duly filled mineral wool insulation having density
min 96 kg/m³ and fixing with necessary stainless steel ball
bearing hinges of size 100x89x3mm of approved make,
including applying a coat of approved fire resistant primer or
powder coating not less than 30 micron etc all complete as
per direction of Engineer-in-charge (panelling to be paid for
separately).

Details of cost for 3.50 sqm (Door size- 1710 x 2050 mm)
MATERIAL:
8018 Fire Rated door shutter made with 1.6 mm thick Sheet (120 sqm 3.5000
minutes), including hinges but without glass panels but
including wastages
8101 Stainless steel ball bearing hinges of size 100x89x3mm each 8.0000
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.5 sqm
Cost of 1 sqm
Say
9.163 Providing and fixing non load bearing fixed frame for fire
resistant glazed Partition for 120 minutes Fire Rating, made
out to a profile of dimension 60mm x 70 mm of 1.6 mm thick
galvanised steel sheet as per test evidence suitable for fixing
fire rated glass for 120 minutes of both integrity & radiation
control (EW120) & minimum 20 minutes of insulation
(EI20).The profile has to be fixed to the supporting
construction by means of anchor fasteners of size M10 x 80,
every 150 mm from the edges and every 500 mm (approx)
c/c. Linear measurement of frame shall be measured for
payment. The frame shall be filled with mineral wool
insulation of density min 96kg/ m³. and finished with a
approved fire resistant primer or Powder coating of not less
than 30 micron in desired shade as per NBC 2016, IS 16231
(Part 3):2016 and directions of Engineer - in- charge.

Details of cost for 5.81 metre (2.05+1.71+2.05) (Door size-
1710 x 2050 mm)

MATERIAL:
8017 Fire Rated door Frame made with 1.6 mm thick G.I. Sheet metre 5.8100
(120 minutes)
LABOUR:
9999 Sundries and carriage ( Fasteners, sims, Hole Plugs etc) L.S. 250.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.81 metre
Cost of 1 metre
Say
9.164 Providing and fixing glazing in fire resistant door shutters,
fixed panels & partitions etc., with G.I. beading made out of
1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²)
of size 20 x 33 mm screwed with M4 x 38 mm SS screws at
distance 75 mm from the edges and 150 mm c/c , including
applying a coat of approved fire resistant primer/powder
coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as
per NBC 2016, IS 16231 (Part 3):2016 and as per direction of
Engineer-in-charge with glass of required thickness having 120
minutes of fire resistance both integrity & radiation control
(EW120) and minimum 20 minutes of insulation (EI20). The
manufacturer have to give test report/certification of fire
glass and the glass should have the stamp showing the value
of E, EW & EI. The glass shall be tested in approved NABL
accredited lab or by any other accreditation body which
operates in accordance with ISO/IEC 17011 and accredits labs
as per ISO/IEC 17025 for testing and calibration scopes shall
be eligible. The maximum glazing size shall not be more than
1100x2200 mm (w x h) or 2.42 sqm.

Details of cost for glazing portion 2.46 sqm (Door size 1710
mm x 2050 mm)
Glazing area- 2x0.679x1.808= 2.46 sqm
MATERIAL:
2640 Glass panes of required thickness having 120 minutes of fire sqm 2.4600
resistance both integrity and radiation control (EW120) and
minimum 20 minutes of insulation (EI 20)
2641 G.I. U beading of 1.6 mm thick G.I. Sheet with M4x38mm SS metre 9.9100
screws
2642 Ceramic tape 5x20 mm size metre 19.8200
LABOUR:
9999 Sundries and carriage & Calcium Silicate Blocks L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.46 sqm
Cost of 1 sqm
Say
9.165 Providing and fixing bright /matt finished Stainless Steel

handles of approved quality & make with necessary screws
etc all complete.
9.165.1 125 mm
Details of cost for ten nos (125 mm)
MATERIAL
0554 Stainless steel fancy handles (125mm) for kitchen cabinet 10 Nos 1.0000
8214 SS screws 20mm 100 Nos. 0.4000

9999 Carriage of material LS 1.8200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10nos
Cost for1 no
Say
9.165.2 100mm
MATERIAL
8214 SS screws 20mm 100 Nos. 0.4000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10nos
Cost for1 no
Say
9.165.3 75 mm
MATERIAL
8214 SS screws 20mm 100 Nos. 0.4000

9999 Carriage of material LS 1.8200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10nos
Cost for1 no
Say
9.166 Providing and fixing 18mm thick both sides Pre-laminated

cement bonded wood particle board as per IS : 15786:2008 of
approved brand and shade with suitable full threaded steel
screws etc. in partitions, boxes, shelves, racks and cupboard,
kitchen cabinet under kitchen counter etc. all complete as per
direction of Engineer-in-charge (Note: Fittings to be paid
separately).
9.166.1 18 mm thick
MATERIAL
4x75x20cm = 0.60sqm.
Total = 0.63 sqm
2495 18mm thick both sides Pre-laminated cement bonded wood sqm 0.6300
particle board as per IS : 15786:2008
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm
Say
9.167 Providing and fixing 6mm thick both sides Pre-laminated

cement bonded wood particle board as per IS : 15786:2008 of
approved brand and shade with suitable full threaded steel
screws etc. on the backing of racks, drawer, cupboard, kitchen
cabinet under kitchen counter etc. all complete as per

MATERIAL
6mm thick board = 7.00sqm.+
Total = 7.35 sqm
2496 6mm thick both sides Pre-laminated cement bonded wood
particle board as per IS : 15786:2008 sqm 7.3500

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm.
Cost of 1 sqm.
Say
9.168 Providing and fixing cupboard shutter with 19mm thick one
side decorative and other side balancing lamination factory
pressed BWP grade marine ply as per IS 710 of approved
brand including 2mm thick PVC edge banding tape with hot
glue by edge bending machine etc. with auto closing spring
loaded hinges (hydraulic type) etc. complete as per direction
of Engineer-in-charge.(Payment of providing and fixing auto
closing hinges shall be paid separately)

MATERIAL
19mm thick prelaminated ply
2.20sqm.+ Add wastage @ 5% = 0.11 sqm. Total = 2.31 sqm
2497 19mm thick one side decorative and other side balancing sqm 2.3100
lamination factory pressed BWP grade marine ply as per IS
710
9977 Carriage of shutter L.S. 29.6400

2489 PVC edge bending tape 2 X (2.00+1.10)= 6.20 metre metre 6.2000
LABOUR
For fixing shutter and PVC edge bending tape
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.169 Providing and fixing 19mm thick both side balancing

lamination factory pressed BWP grade marine ply as per IS
710 of approved brand boxes,shelves,racks,almirah,cupboard
and drawer etc. including necessary nails, screws etc.

MATERIAL
4x75x20cm = 0.60sqm.
Total = 0.63 sqm
2498 19mm thick both side balancing lamination factory pressed sqm 0.6300
BWP grade marine ply as per IS 710
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.60 sqm.
Cost of 1sqm.
Say
9.170 Providing and fixing stainless steel fancy handle of approved

make fixed with SS screws etc. complete as per direction of
Engineer-in-charge.
9.170.1 200 mm
MATERIAL
8227 Stainless steel fancy handle 10 Nos 1.0000
8212 SS screws 30mm 100 Nos 0.4000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.171 Providing and fixing stainless steel soft closing spring hinges at
0 degree hinges (hydraulic type) of approved make/brand to
cupboard shutters with full threaded steel screws including
making necessary recess in board and finished etc. complete
as per direction of Engineer-in-charge.

MATERIAL
8228 Soft closing stainless steel hinges 10 sets 1.0000
8212 SS screws 30mm 100 Nos 0.4000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.172 Providing and fixing stainless steel soft closing heavy type
telescopic drawer channels of approved make 500 mm long
with screws etc. complete as per directions of Engineer- in-
charge.

Details of cost for 10 sets.
MATERIAL
8229 Stainless steel telescopic drawer channels 500mm long . set 10.0000
9977 CARRIAGE L.S. 19.5000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sets
Cost for 1 set
Say
9.173 Providing and fixing ready made 304 grade stainless steel
Modular kitchen basket and accessories such as right angle
basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali,
Cutlery) kitchen utensil basket, Dinner set basket, kitchen
grain basket, Multipurpose basket as per site requirement
including finishing (wherever required) and fittings. The same
shall be fixed with necessary stainless steel nuts & bolts,
Stainless Steel screws & telescopic channel etc. as per
direction of Engineer-in-charge. (For payment purpose only
weight of Stainless steel basket shall be considered excluding
weight of all fixing accessories such as nuts, bolts, fasteners
telescopic basket channels etc. Payment of providing and
fixing telescopic channel shall be paid separately)

Details of cost for 2kg
MATERIAL
Qty= 2kg +
Add wastage @ 5% = 0.10
Total = 2.1 kg
8230 Stainless steel (Grade-304) basket (readymade) kg 2.1000
9999 Stainless steel nuts & SS screws etc. LS 7.5000
LABOUR
For fixing
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 kg
Cost of 1 kg.
Say
9.174 Providing and fixing 2mm thick 16 to 19mm wide PVC edge
binding tape of approved quality for cupboard/wardrobe
shutters including necessary synthetic resin hot pressed to
edges on binding machine etc. complete as per directions of
Engineer- in-charge.

MATERIAL
2489 PVC edge binding tape metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10metre
Cost of 1 metre
Say
10.1 Structural steel work in single section, fixed with or without

connecting plate, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer all
complete.

Details of cost for one quintal
MATERIAL
Steel = 1.00q
Add wastage @ 5% = 0.05q
Total = 1.05q
1007 Structurals such as tees, angles channels and R.S. joists quintal 1.0500
LABOUR
Priming Coat
13.50.3 Rate as per Item Number 13.50.3 of SH:Finishing sqm 3.0000
9999 Sundries L.S. 20.6700
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1qunital
Cost of 1 Kg.
Say
10.2 Structural steel work riveted, bolted or welded in built up
sections, trusses and framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved
steel primer all complete.

Details of cost for a truss 7.6m clear span (weight = 3.95
quintal
MATERIAL
i) Principal rafter (T-iron)
100x100x10mm @15kg/m = 142.50Kg+
Struts (angles)40x40x6mm
2x1.35=2.70m @ 3.5kg/m = 9.45kg
Total =151.95kg+
Add wastage @ 5% = 7.60kg
Total = 159.55kg. = 1.60q
1007 tructurals such as tees, angles channels and R.S. joists quintal 1.6000
(ii) Ties (flats) 50x12mm
2x2.7 = 5.4m @4.7kg/m = 25.38kg+
Ties central (flats) 50x10mm = 53.18kg. = 0.53q
1x2.28 = 2.8m @3.90kg/m = 10.92kg.+
Braces (flats)40x10mm
2x1.84 = 3.68m @3.9kg/m = 14.35kg.
Total = 50.65kg+
Total=53.18 kg = 0.53 quintal
1009 Flats exceeding 10 mm in thickness quintal 0.5300
(iii) Gusset plates 10mm thick
1x0.74x0.35m = 0.259sqm.+
shoe 4x0.46x0.46 = 0.845sqm
Total = 1.104sqm
1.104sqm at 78.4kg/m = 86.55kg
12mm plates at the point of principal rafter and strut_x0002_
2x0.3x0.2 = 0.12sqm.+
Tie beam, brace and strut_x0002_
2x0.5x0.3 = 0.30sqm.+
Sole plates-
2x0.46x0.46 = 0.42sqm.+
Anchor plate-
2x0.46x0.1 = 0.09sqm.
Total = 0.93 sqm.
Say 1.00 sqm.
1.0sqm. @ 94.4kg/m = 94.40kg.
Total = 180.95kg.
Total = 190.00kg or 1.90q
1010 Mild steel plates quintal 0.0602
(iv) 16mm dia. 50mm long rivets = 56 nos @ 0.10753 kg/each
= 6.02168 kgs or 0.0602 quintal
1020 Mild steel rivets quintal 0.0485
(v) 20mm dia. (460mm long) holding down bolts with nut and
washers, 4 Nos. @ 1.2125 kg/each = 4.85 kgs or 0.0485
quintal
1221 20 mm dia holding down bolts quintal 0.0529

(0.160+0.053+0.091 +0.099+
0.007+0.005)
=0.415 tonne
LABOUR
Applying priming coat-
T.Iron 9.5x0.4 = 3.80sqm.+
Struts 2.70x0.16 = 0.43sqm.+
Ties 5.4x0.124 = 0.67sqm.+
Braces 2x1.84x0.12 = 0.44 sqm.+
Ties 2.8x0.12 = 0.34 sqm.
Total = 5.68 sqm.
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3.95 quintal
Cost of per kg.
Say
10.3 Providing and fixing in position collapsible steel shutters with

vertical channels 20x10x2 mm and braced with flat iron
diagonals 20x5 mm size, with top and bottom rail of T-iron
40x40x6 mm, with 40 mm dia steel pulleys, complete with
bolts, nuts, locking arrangement, stoppers, handles, including
applying a priming coat of approved steel primer.

Details of cost for a gate 2.4mx1.5m = 3.6sqm.
MATERIAL
M.S. channels 18 Nos. on both sides
20x10x2mm @ 0.56kg/m
2x18x2.4 = 86.40m+
Add wastage @ 10% = 8.64m
Total = 95.04m
95.04m@0.56kg/m =53.22kg=0.53q
M.S. Tee-40x40x6mm
for bottom-1.570m+
for top = 1.725m
Total =3.295m Say 3.3m
3.3m @ 3.5kg/m = 11.55kg+
Add wastage @ 10% = 1.155 Kg.
Total = 12.705Kg. Say 0.13q
20mmx5mm flat iron diagonals 4 Nos.
4x32x0.5334 = 68.275m
68.275m @ 0.8kg/m = 54.62kg+
Add wastage @10% = 5.46kg
Total = 60.08kg = 0.60q
(0.053+0.013+0.060=0.126 tonne)
9999 Cost of rivets fixing hooks and washers L.S. 269.1000
9999 Cost of locking arrangements and handles L.S. 67.3400
4013 Pully 40 mm dia each 10.0000
Priming coat-
Channel - 36x0.076x2.4 = 6.57sqm.+
Tee-0.16x3.3 = 0.53sqm.+
Flats-0.05x68 = 3.40sqm.
Total = 10.50sqm.
LABOUR
9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.6sqm.
Cost per sqm.
Say
10.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters,

with frame and diagonal braces of 40x40x6 mm angle iron, 3
mm M.S. gusset plates at the junctions and corners, 25 mm
dia pulley, 40x40x6 mm angle and T- iron guide at the top and
bottom respectively, including applying a priming coat of
approved steel primer

Details of cost for one double leaf door size 2.4x2.4m =
5.76sqm.
MATERIAL
(i) M.S. sheet 1mm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
1013 Mild steel sheets for tanks quintal 0.4970
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
Total = 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
Total = 0.5910sqm.
0.5910sqm.@23.55kg/sqm.=13.92kg.+
Total = 15.31kg. or 0.153q
(iii) Angle iron
40x40x6mm @ 3.5kg/m
Sides-4x2.4=9.6m+
Bottom & top 4x1.2 = 4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
Top and bottom guides
2x4.8 = 9.6m
Top guide supports
7x0.8 = 2.1m
Total = 36.0m
36m @3.5kg. per m. = 126kg.+
Total = 138.6kg. or 1.39q
Channel 25x25x6mm @ 3.05kg/m
Bottom-2.4m : 2.4x3.05
Channel 40x40x6mm @ 5.56kg/m
0.5x5.56 = 2.78kg.
Total = 10.1kg.+
Total = 11.11kg. or 0.11q
(0.0497+0.015+0.139+0.11=0.2157 tonne)
9999 (iv) Pully guide blocks including drilling holes L.S. 269.1000
0969 Pully 25 mm dia each 8.0000
9999 (vi) Handles and locking arrangements L.S. 167.7500
9999 (vii) Bolts and rivets L.S. 269.1000
9999 (viii)Cement concrete L.S. 13.5200
Priming coat-
M.S. Sheet 2x5.76 = 11.52+
Angle iron 0.16x36 = 5.76+
Channel-0.15x2.4=0.36+
0.24x0.5=0.12
Total = 17.76 Say 18.0sqm.
LABOUR
9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.5 Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6 mm angle iron and 3 mm M.S. gusset plates at the
junctions and corners, all necessary fittings complete,
including applying a priming coat of approved steel primer.
10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces

Details of cost for a double leaf door of size
2.4mx2.4m=5.76sqm.
MATERIAL
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
Total = 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
Total = 0.5910sqm.
0.5910sqm.@23.55kg/sqm.=13.92kg.+
Total = 15.31kg. or 0.153q
iii) Angle iron:40x40x6mm @
3.5kg/m Sides-4x2.40 = 9.6m+
Top & bottom-4x1.20=4.8m+
Diagonals-2x2.5=5.0m+ 2x2.45 = 4.9m+
Total = 24.30m+
Total =26.73m
26.73m @ 3.5kg. per m. = 93.56kg=0.936q
(0.0497+0.0153+0.0936 tonne) = 0.1586 t
1036 Iron pintels including welded pin each 4.0000
1222 Mild steel sheets with bolts and nuts to rest on pintels each 4.0000
1019 Mild steel hooks each 2.0000
9999 Locking arrangements and handles L.S. 167.7000
9999 Rivets L.S. 269.1000
Priming coat-
M.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
Total = 15.41
LABOUR
9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.5.2 Using flats 30x6mm for diagonal braces and central cross
piece
Details of cost for a double leaf door of size 2.4x2.4m =
5.76sqm.
MATERIAL
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
(ii) Gussets plates-3.00mm thick vide (ii)
in item 10.6 = 0.5910sqm.+
at mid height = 4x0.0528 = 0.2112sqm.
Total = 0.8022sqm.+
Total =0.8824sqm.@ 23.55 kg/sqm =20.78 kg
Grand Total = 0.2078 qtl
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4x1.20=4.8m+
Total = 14.40m+
Total = 15.84m
15.84m @ 3.5kg. per m. = 55.44kg
= 0.554qtl
(iv) Flats 30x6mm @1.4kg/m
4x2.45=9.80m+
2x1.20=2.40m
Total = 12.20m+
Total = 13.42m
13.42m @ 1.4kg. per m. = 18.788kg.
= 0.188q
Carriage of (i) (ii) and (iv)
0.0497+0.0208+0.0554+0.0188=0.1447 tonne
1036 Iron pintels including welded pin each 4.0000
1222 Mild steel sheets with bolts and nuts to rest on pintels each 4.0000
1019 Mild steel hooks each 2.0000
9999 Locking arrangements and handles L.S. 167.7000
9999 Rivets L.S. 269.1000
Applying priming coat-
M.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
0.16x14.40 = 2.30+
Flats 0.072x12.2 = 0.88
Total = 14.70sqm.
LABOUR
9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.6 Supplying and fixing rolling shutters of approved make, made
of required size M.S. laths, interlocked together through their
entire length and jointed together at the end by end locks,
mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with
push and pull operation complete, including the cost of
providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate
strength conforming to IS: 4454 - part 1 and M.S. top cover of
required thickness for rolling shutters.
10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Details of cost for a shutter of size 3mx2.5m = 7.5sqm.
MATERIAL
0973 Rolling shutter made of 80x1.25 mm machine rolled laths sqm 7.5000
0974 Top cover for rolling shutters 1.25 mm thick metre 2.5000
0975 27.5 cm long wire spring grade no 2 for rolling shutters each 1.0000
9977 CARRIAGE L.S. 53.8200
LABOUR
9999 Sundries L.S. 60.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say

MATERIAL
7045 Rolling shutters of 80x1.2 mm laths sqm 7.5000
7047 Top cover of Rolling shutters 1.20 mm thick metre 2.5000
9977 CARRIAGE L.S. 53.8200
LABOUR
9999 Sundries L.S. 60.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say

MATERIAL
7044 Rolling shutters of 80x0.90 mm laths sqm 7.5000
7046 Top cover of Rolling shutters 0.90 mm thick metre 2.5000
9977 CARRIAGE L.S. 53.8200
LABOUR
9999 Sundries L.S. 60.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say
10.7 Providing and fixing ball bearing for rolling shutters.

0976 Ball bearing for rolling shutters each 1.0000
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
10.8 Extra for providing mechanical device chain and crank

operation for operating rolling shutters.
10.8.1 Exceeding 10.00 sqm and up to 16.80 sqm in the area
0977 Extra for mechanical devices chain and cranked operation for sqm 1.0000
operating rolling shutters : exceeding 10.00 sq.m and up to
16.80 sq.m area of door
9999 Sundries L.S. 13.5200

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
10.8.2 Exceeding 16.80 sqm in area

0978 Extra for mechanical devices chain and cranked operation for sqm 1.0000
operating rolling shutters : exceeding 16.80 sq.m area of door
9999 Sundries L.S. 13.5200

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
10.9 Extra for providing grilled rolling shutters manufactured out of
8 mm dia M.S. bar instead of laths as per design approved by
Engineer-in- charge, (area of grill to be measured).

Details of cost for a shutter of width 2.5m and grill height
0.6m
Grill Area = 1.50sqm.
MATERIAL
7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. sqm 1.5000
rod
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.5sqm.
Cost per sqm.
Say
10.10 Fixing standard steel glazed doors, windows and ventilators in

walls, including fixing of float glass panes with glazing clips
and special metal-sash putty of approved make, or metal
beading with screws, (only steel windows, glass panes cut to
size and glazing clips or metal beading with screws, shall be
supplied by department free of cost.
10.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)

Details of cost for one door 2x0.76m = 1.52sqm.(weight 15 kg)
MATERIAL
Cement concrete blocks 15x10x10cm = 0.009 cum
LABOUR
9977 Sundries for carriage of material L.S. 67.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15 kg
Cost per kg
Say
10.10.2 Fixing with carbon steel galvanised dash fastener of required

dia and size (to be paid for separately)
Details of cost for one door 2x0.76m = 1.52sqm.(weight 15 kg)
LABOUR
9977 Sundries for Carriage of material L.S. 67.2800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15 kg
Cost per kg
Say
10.11 Providing and fixing factory made ISI marked steel glazed
doors, windows and ventilators, side /top /centre hung, with
beading and all members such as F7D,F4B, K11 B and K12 B
etc. complete of standard rolled steel sections, joints mitred
and flash butt welded and sash bars tenoned and riveted,
including providing and fixing of hinges, pivots, including
priming coat of approved steel primer, but excluding the cost
of other fittings, complete all as per approved design,
(sectional weight of only steel members shall be measured for
payment).


Details of cost for a double leaf door of
size 2.075x1.175m = 2.44 sqm. (weight 30 kg).
MATERIAL
1011 Steel glazed door, window/ ventilator, all members like as kg 30.0000
F7D, F4B, K11 and K12B etc.
9977 Carriage of Steel Door L.S. 40.3700
Labour for fabrication
9999 Sundries L.S. 15.3700
Fixing with CC 1:3:6 blocks, wooden plugs and screws or rawl
plugs and screws or with fixing clips and bolts and nuts as
required including metal sash putty for glass fixing
10.10.1 Rate as per Item No.10.10.1 kg 30.0000

Apply steel primer
(2.44x1.00 for both sides)=2.44 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 kg.
Cost of 1 kg.
Say

Details of cost for a double leaf door of
size 2.075x1.175m = 2.44 sqm. (weight 30 kg).
MATERIAL
1011 Steel glazed door, window/ ventilator, all members like as kg 30.0000
F7D, F4B, K11 and K12B etc.
9977 Carriage of Steel Door L.S. 40.3700
9999 Sundries L.S. 15.3700
Labour for fixing
0115 Collie day 0.0195
0128 Mate day 0.0012
9999 Hire charges of drill machine, scaffolding and sundries L.S. 12.2200
Apply steel primer
(2.44x1.00 for both sides)=2.44 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 kg.
Cost of 1 kg.
Say
10.12 Extra for providing and fixing steel beading of size 10 x 10 x

1.6 mm (box type), approved shape and section with screws
instead of glazing clips and metal sash putty, in steel doors,
windows, ventilators and composite units.

Detail of cost for 1 metre beading for doors, windows,
Ventilators and composite units
1143 Steel beading size 10 x 10 x 1.6 mm (box type) metre 1.0000
9999 Applying priming coat L.S. 0.4600
9999 Fixing charges L.S. 3.0100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre
Say
10.13 Providing and fixing T-iron frames for doors, windows and
ventilators of mild steel Tee-sections, joints mitred and
welded, including fixing of necessary butt hinges and screws
and applying a priming coat of approved steel primer.
sand : 6 graded stone aggregate 20 mm nominal size).

Details of cost for 17.5Kg.
MATERIAL
Tee iron 40x40x6mm = 2m+2m+1m = 5 metres
5 metres @3.5Kg/m = 17.5kg.+
Add wastage @ 5% = 0.87Kg.
Total = 18.37 kg. Say 0.18 quintal
M.S. bars 10mm = 1x1m = 1 metre
1 metre @ 0.60kg/m = 0.60Kg.+
Total = 0.63 Kg. Say = 0.006 quintal
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21Kg+
Total = 0.22 kg = 0.002q.
Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum

100x58x1.90 mm 10 Nos 0.6000

9999 For screws and nuts and bolts L.S. 35.8800
9999 For applying steel primer L.S. 17.9400
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 17.5Kg.
Cost for 1 Kg.
Say
MATERIAL
Tee iron 40x40x6mm = 2m+2m+1m = 5 metres
5 metres @3.5Kg/m = 17.5kg.+
Total = 18.37 kg. Say 0.18 quintal
1 metre @ 0.60kg/m = 0.60Kg.+
100x58x1.90 mm 10 Nos 0.6000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 17.5Kg.
Cost for 1 Kg.
Say
10.14 Providing and fixing pressed steel door frames conforming to
IS: 4351, manufactured from commercial mild steel sheet of
1.60 mm thickness, including hinges, jamb, lock jamb, bead
and if required angle threshold of mild steel angle of section
50x25 mm, or base ties of 1.60 mm, pressed mild steel welded
or rigidly fixed together by mechanical means, including M.S.
pressed butt hinges 2.5 mm thick with mortar guards, lock
strike-plate and shock absorbers as specified and applying a
coat of approved steel primer after pre-treatment of the
surface as directed by Engineer-in-charge:
10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb

MATERIAL
4006 Pressed steel door frames (mild steel sheet 1.60mm) Profile metre 5.0000
"B" frame
2+2+1m=5m
100x58x1.90 mm
9999 Screws, nuts and bolts L.S. 35.8800

50x25x5mm. M.S. Angle for threshold 1 metre @ 2.75kg per
uds =2.75kg. Say 0.03q
LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1metre
Say
10.14.1.2 Fixing with carbon steel galvanised50x25x5mm.

dash fastener
M.S.
of Angle
required
for threshold 1 metre @ 2.75kg per uds Unit
Code Description Quantity
MATERIAL
"B" frame
2+2+1m=5m
9999 Deduct sundries for not providing adjustable lugs L.S. -20.0000
100x58x1.90 mm
LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1metre
Say
10.14.2 Profile C

MATERIAL
"C"
2+2+1m=5m
100x58x1.90 mm
LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1 metre
Say
10.14.2.2 Fixing with carbon steel galvanised dash fastener of required

MATERIAL
"C"
2+2+1m=5m
9999 Sundries for not providing adjustable lugs(-) L.S. -20.0000
100x58x1.90 mm

LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1 metre
Say
10.14.3 Profile E

MATERIAL
"E"
2+2+1m=5m
100x58x1.90 mm
LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1 metre
Say
10.14.3.2 Fixing with carbon steel galvanised dash fastener of required
MATERIAL
"E"
2+2+1m=5m
9999 Sundries for not providing adjustable lugs (-) L.S. -20.0000
100x58x1.90 mm
LABOUR
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metres
Cost for 1 metre
Say
10.15 Providing and fixing M.S. Tubular frames for doors, windows,
ventilators and cupboard with rectangular/ L-Type sections,
made of 1.60 mm thick M.S. Sheet, joints mitred, welded and
grinded finish, with profiles of required size, including fixing of
necessary butt hinges and screws and applying a priming coat
of approved steel primer.


MATERIAL
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet = 32+24.80+22+
24.80+10mm = 113.60mm = 0.1136 m
Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm
Weight of Sheet = 0.0009088x7850 =7.134 kg
Total = 7.491 kg Say 7.49 kg
4011 Mild steel tubes electric resistant or induction butt welded kilogram 7.4900

1 metre @ 0.60kg/m = 0.60Kg.
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21Kg
Total = 0.22 kg = 0.002q
Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum

100x58x1.90 mm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.13Kg.
Cost for 1 Kg.
Say
MATERIAL
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet = 32+24.80+22+24.80+
10mm = 113.60mm = 0.1136 m
Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm
Weight of Sheet = 0.0009088x7850 =7.134 kg

1 metre @ 0.60kg/m = 0.60Kg.
100x58x1.90 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7.13Kg.
Cost for 1 Kg.
Say
10.16 Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting,
hoisting, fixing in position and applying a priming coat of
approved steel primer, including welding and bolted with
special shaped washers etc. complete.
10.16.1 Hot finished welded type tubes
Details of cost for a truss of span 8 metre
weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam- 1 x 8.0m = 8.00m +
Principal rafter 2x4.30m = 8.60m = 16.60m
16.60m @ 5.10kg./ m = 84.66 kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total= 2x 4.75 = 9.50m
9.50m @ 3.61kg/m = 34.60kg.
Total = 118.96kg.
Total=124.90kg. say 125 kg
4009 Hot finished welded type tubes kilogram 125.0000
Priming coat
50mm dia. tube 16.60x0.157m = 1.61sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
Total = 2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:- 2x4x2x22/7x4.83=242.87cm
Total= 356.57cm say 357cm
LABOUR
For cutting, assembling & erection
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 119 Kg.
Cost for 1 Kg.
Say
10.16.2 Hot finished seamless type tubes

weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam- 1 x 8.0m = 8.00m +
Principal rafter 2x4.30m = 8.60m = 16.60m
16.60m @ 5.10kg./ m = 84.66 kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total= 2x 4.75 = 9.50m
9.50m @ 3.61kg/m = 34.60kg.
Total = 118.96kg.
Total=124.90kg. say 125 kg
4010 Mild steel tubes hot finished seamless type kilogram 125.0000
Priming coat
50mm dia. tube 16.60x0.157 m = 1.61 sqm.
40mm dia. tube 9.50x 10125m =
1.91 sqm. =2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties :- 2x22/7x6.03=37.90cm.+
Members :- 2x4x2x22/7x4.83 = 242.87cm
Total= 356.57 cm say 357 cm
LABOUR
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 119 kg Cost for 1 kg Say
10.16.3 Electric resistance or induction butt welded tubes

weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam-1x8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
Total = 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total = 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Total = 124.90Kg. say 125 kg

Priming coat
50mm dia. tube 16.60x0.157m = 1.61sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
Total = 2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:- 2x4x2x22/7x4.83=242.87cm
Total= 356.57cm say 357cm
LABOUR
9999 Sundries L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 119 Kg.
Cost for 1 Kg.
Say
10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia
M.S. bar, bent to shape with hooked ends in R.C.C. slabs or
beams during laying, including painting the exposed portion of
loop, all as per standard design complete.

Details of cost for 1 clamp
MATERIAL
16mm dia. M.S. bar 1m @ 1.58 kg/m
1x1.58 = 1.58Kg+
Total = 1.66 Kg.
Say 1.70kg. or 0.017q
LABOUR
9988 Sundries (Carriage, fixing and painting etc.) L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 clamp
Say
10.18 Providing and fixing circular/ Hexagonal cast iron or M.S.

sheet box for ceiling fan clamp, of internal dia 140 mm, 73
mm height, top lid of 1.5 mm thick M.S. sheet with its top
surface hacked for proper bonding, top lid shall be screwed
into the cast iron/ M.S. sheet box by means of 3.3 mm dia
round headed screws, one lock at the corners. Clamp shall be
made of 12 mm dia M.S. bar bent to shape as per standard
drawing.

Details of cost of one box clamp
MATERIAL
4012 Circular C.I. Box for ceiling fan each 1.0000
12mm dia. M.S. bar 80cm @ 0.9kg/m = 0.72kg+
Total = 0.756 kg. Say 0.008 q
LABOUR
9988 Sundries (Carriage, fixing and painting etc.) L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 box clamp
Say
10.19 Providing and fixing mild steel round holding down bolts with
nuts and washer plates complete.
Details of cost for one bolt 16mm dia. and 1200mm long
(0.024
quintal)
MATERIAL
l .2m @ 1.58kg/m = 1.895 kg = 0.019q
1035 Bolts and nuts above 300 mm in length quintal 0.0190
Plate-100x100x6mm @ 47kg/sqm.
Wt. = 0.47kg. = 0.005q
LABOUR
9988 Carriage and labour for fixing L.S. 4.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.024q
Cost of 1 kg.
Say
10.2 Providing and fixing bolts including nuts and washers

complete.
Details of cost for 0.10q of nuts and washers
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.10q
Cost of 1 kg.
Say
10.21 Providing and fixing M.S. rivets of sizes in position.

Details of cost for 0.10q of rivets
MATERIAL
1020 Mild steel rivets quintal 0.1000
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.10q
Cost of 1 kg.
Say
10.22 Welding by gas or electric plant including transportation of

plant at site etc. complete.
Details of cost for one cm.
1214 Welding by gas plant cm 1.0000
including transportation of welding plant at site etc. complete

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1cm.
Say
10.25 Steel work welded in built up sections/ framed work, including

cutting, hoisting, fixing in position and applying a priming coat
of approved steel primer using structural steel etc. as
required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use

of chequered plate wherever required, all complete

Detail of cost for 5.331 kg
Consider a flight of staircase of 2.8m height with tread and
riser of 200mm & 0.60m wide.
MATERIAL
(i) Unequal angles as stringers-
75x50x6mm 4x12.69x5.6 = 284.25 Kg.
Total = 298.46kg. Say 2.985q
(ii) unequal angles at sides
-50x30x5mm 2x14x0.2x3.00=16.8kg.
Total = 17.64 kg. Say 0.176q
Total = 3.161q
(iii) plate for tread 8mm thick
14x7.5 = 105.00kg+
Total = 110.25kg. Say 1.103q
(iv) G.I. pipe for rolling 40mm
2x12.69m = 25.38m+
Total = 26.65m
1549 G.I. pipes 40 mm dia metre 26.6500
(v) M.S. round bars 16mm dia.
15x0.75x2x1.58 = 35.55kg.+
Total = 37.33 Kg. Say 0.373q
(3.I61 + 1.103+0.373)=4.637q = 0.4637 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.0991
approx. wt. 3.72x26.65=99.14kg = 0.0991q.
23.20 m = 2320cm
LABOUR
Applying priming coat
(i) steps 2.4x14 = 33.60sqm.+
(ii) angles-4x12.69x0.25 = 12.69sqm.+
(iii) Bars and other components =
2.00 sqm. (L.S.)
Total = 48.29 sqm
9999 Sundries L.S. 110.8900
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.331 quintal
Cost per kg.
Say
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works
Details of 1mx1m framed guard bar grating (0.218 quintal).
MATERIAL
(i) M.S. flat 50x6mm 2.4kg/per metre
5.75x2.40 = 13.8kg.+
Total = 14.49kg. Say 14.5 kg.
(ii) 12mm dia. bars @ 0.89 kg/m
9x1= 9metre @ 0.89kg/m = 8.01kg+
Total = 8.41 kg. Say 0.084q
1215 Welding by electric plant 60 cm cm 60.0000
LABOUR
Applying priming coat 0.6 sqm.
TOTAL
TOTAL
TOTAL
TOTAL
Cost per kg
Say
10.26 Providing and fixing hand rail of approved size by welding etc.
to steel ladder railing, balcony railing, staircase railing and
similar works, including applying priming coat of approved
steel primer.
10.26.1 M.S. tube

Details of cost for hand rail of railing of two flights of
staircase,
length of hand rail = 5.40m
MATERIAL
M.S. tube 40mm nominal bore (medium) =
5.40m @ 3.6lkg/m= 19.49kg
Add wastage @ 5% = 0.97 kg
Total = 20.46 kg
20.46kg = 0.205q
Priming coat 40mm dia.Tube
5.4x22/7x0.0483 = 0.82 sqm
(joints of hand rail and balustrades)
18x4x1.00 = 72cm
Labour for cutting assembling & erection
LABOUR
9999 Sundries L.S. 12.4800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 19.49 Kg.
Cost per 1 kg.
Say
10.26.2 E.R.W. tubes

staircase,
length of hand rail =5.40m
MATERIAL
E.R.W. tube 40mm nominal bore =
5.40m @ 3.28kg/m= 17.71kg
Total = 18.59 kg

18.59kg = 0.0186q
5.4x22/7x0.0483 = 0.82 sqm
18x4x1.00 = 72cm
LABOUR
9999 Sundries L.S. 12.4800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 17.71 Kg.
Cost per 1 kg.
Say
10.26.3 G.I. pipes
staircase,
length of hand rail = 5.40m i.e. 20.09 kg
MATERIAL
G.I. pipe 40mm nominal bore = 5.40m
Total = 5.67m
(5.67m @ 3.72 kg/m = 21.09kg)
5.4x22/7x0.0483 = 0.82 sqm
18x4x1.00 = 72cm
LABOUR
9999 Sundries L.S. 12.4800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.09 Kg.
Cost per 1 kg.
Say
10.27 Providing and fixing carbon steel galvanised ( minimum

coating 5 micron) dash fastener of 10 mm dia double
threaded 6.8 grade (yield strength 480 N/mm2), counter sunk
head, comprising of 10 mm dia polyamide PA 6 grade sleeve,
including drilling of hole in frame , concrete/ masonry, etc. as
per direction of Engineer-in-charge.
10.27.1 10 x 60 mm
MATERIAL
2506 Carbon Steel galvanised dash fastener (min 5 micron) of 10 10 nos 1.0000
mm dia double threaded 6.8 grade counter sunk head screw
comprising of 10 mm dia polyamide PA 6 grade sleave. Size
10mm x 60mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.27.2 10 x 80 mm
MATERIAL
2507 Carbon Steel galvanised dash fastener (min5 micron) of 10 10 nos 1.0000
10mm x 80mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.27.3 10 x 120 mm
MATERIAL
10mm x 120mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.27.4 10 x 140 mm
MATERIAL
10mm x 140mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.27.5 10 x 160 mm
MATERIAL
10mm x 160mm
LABOUR
9977 Sundries for Carriage of material L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.28 Providing and fixing stainless steel ( Grade 304) railing made
of Hollow tubes, channels, plates etc., including welding,
grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the floor or the side
of waist slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.).

Details of cost for 2kg
MATERIAL
Qty= 2kg +
Total = 2.1 kg
4001 Stainless steel (Grade-304)hollow section round/square tubes kg 2.1000
4002 Stainless steel bolts/square bar and plates kg 1.0000

LABOUR
for fabrication, assembling, errection, welding, curvaturing,
grinding, buffing etc.
9999 Welding of stainless steel section L.S. 30.0000
9999 Curvaturing, grinding, finishing, buffing L.S. 20.0000
9999 Sundries for making good wall and floors L.S. 7.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 kg
Cost of 1 kg.
Say
10.29 Providing & fixing fly proof wire gauze to windows, clerestory
windows & doors with M.S. Flat 15x3 mm and nuts & bolts
complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4
mm aperture on both sides
Details of cost for a window shutter 1.40x1.10=1.54 sqm
MATERIAL
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
Details of cost for a window shutter 1.40x1.10=1.54 sqm
MATERIAL
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm
0.50 mm dia wire
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
10.30 Providing & fixing glass panes with putty and glazing clips in
steel doors, windows, clerestory windows, all complete with :
10.30.1 4.0 mm thick glass panes

Details of cost for 10 glass panes (area of each pane = 0.10
sqm)
MATERIAL
Area of glass panes =1.00 sqm +
Total =1.10 sqm
than 10kg/sqm).
LABOUR
9999 Sundries, putty, glazing clips, scaffolding etc. L.S. 125.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.0 sqm
Say
10.30.2 5.5 mm thick glass panes

Details of cost for 10 glass panes (area of each pane = 0.10
sqm)
MATERIAL
Area of glass panes =1.00 sqm +
Total =1.10 sqm
than 13.50 kg/sqm).
LABOUR
9999 Sundries, putty, glazing clips, scaffolding etc. L.S. 125.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.0 sqm
Say
10.31 Providing and fixing angle iron frames for doors, windows and
ventilators of mild steel Angle sections of size 35x35x5 mm,
joints mitred and welded by angle iron 35x35x5 mm or 35x 5
mm flat pieces to the existing T-iron frame or to the wall with
dash fastener, including fixing of necessary butt hinges and
screws and applying a priming coat of approved steel primer,
all complete as per the direction of Engineer-In-charge.

MATERIAL
Angle/Tee iron 40x40x6 mm=
2+2+1 = 5 m 5 Meters @3.5 Kg/m = 17.5 Kg+
Add Wastage @5% =0.87Kg.“
Total =18.37 Kg. Say 0.18 Quintal
1007 Structural steel such as tees, angles, channels and R.S. Joists quintal 0.1800
1008 M.S. Flats 3x5 mm for fixing frame quintal 0.0037

6x0.05= 0.3 Metre @1.18 Kg/m= 0.354 Kg
Add wastage @5% = 0.018 Kg
Total= 0.37Kg. Say 0.0037 Quintal
1002 M.S. Bars 10mm =1x1 m = 1Metre quintal 0.0060
1 Metre @0.60Kg/m =0.60Kg +
Add wastage @5% = 0.03 Kg.
Total =0.63 Kg, say 0.006 Quintal
Mild steel round bars 10mm dia and below
LABOUR
0103 Blacksmith 2nd Class day 0.1000
0116 Fitter (Grade-I) day 0.1500
9999 Sundries TOTAL L.S. 8.9700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 17.5 kg
Rate per kg
Say
11.1 Brick on edge flooring with bricks of class designation 7.5 on a
bed of 12 mm cement mortar, including filling the joints with
same mortar, with common burnt clay non modular bricks:
11.1.1 1:4 (1 cement : 4 coarse sand)

MATERIAL
designation 7.5
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.1.2 1:6 (1cement : 6 coarse sand)

MATERIAL
designation 7.5
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.2 Dry brick on edge flooring in required pattern with bricks of

class designation 7.5 on a bed of 12 mm mud mortar,
including filling joints with Jamuna sand, with common burnt
clay non modular bricks.

MATERIAL
designation 7.5
2261 Carriage of Fine sand cum 0.1500
Mud Mortar
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat
cement, including cement slurry, but excluding the cost of
nosing of steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate

MATERIAL
LABOUR
0127 Driver (for Road Roller, Concrete Mixer, Truck etc.) day 0.0300
9999 Sundries L.S. 40.4300

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.4 52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1
nominal size) and top layer 12 mm thick cement hardener
consisting of mix 1:2 (1 cement hardener mix : 2 graded stone
aggregate 6 mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per
manufacturer's specifications. This includes cost of cement
slurry, but excluding the cost of nosing of steps etc. complete.

MATERIAL
2202 Carriage of Stone aggregate below 40 mm cum 0.3560
7254 Hardening compound litre 2.4400
9977 Carriage of hard crete L.S. 2.7300
LABOUR
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.5 62 mm thick cement concrete flooring with concrete hardener

topping, under layer 50 mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) and top layer 12mm thick cement hardener
consisting of mix 1:2 (1 cement hardener mix : 2 graded stone
aggregate, 6mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per
manufacture’s specifications. This includes cost of cement
slurry, but excluding the cost of nosing of steps etc. complete.

MATERIAL
9977 Carriage of Hardening compound L.S. 2.7300
LABOUR
0124 Mason (brick layer) 2nd class Beldar day 2.1500
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.6 Cement plaster skirting up to 30 cm height, with cement

mortar 1:3 (1 cement : 3 coarse sand), finished with a floating
coat of neat cement.
11.6.1 18 mm thick
MATERIAL
Cement mortar 1:3 = 0.205 cum+
Add for rounding corners = 0.030 cum
Total = 0.235 cum
LABOUR
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size),
including finishing complete.

MATERIAL
4.1.3 Rate as per item No.4.1.3 of S.H.Concrete Work cum 1.0000
9999 Sundries L.S. 19.7600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
11.8 Extra for making chequers of approved pattern on cement

concrete floors, steps, landing, pavements etc.
LABOUR
9999 Chequered plate etc. L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.9 40 mm thick marble chips flooring rubbed and polished to
granolithic finish, under layer 34 mm thick cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
12.5 mm nominal size) and top layer 6mm thick with white,
black, chocolate, grey, yellow or green marble chips of sizes
from 1 mm to 4 mm nominal size, laid in cement marble
powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder mix : 7 marble
chips) by volume, including cement slurry etc. complete :
11.9.1 Dark shade pigment with ordinary cement

MATERIAL
For under layer of 34mm thick
for top layer 6mm thick
0785 Marble chips up to 4mm and downsize White & black quintal 0.8720
0874 Black colour dark shade pigment kilogram 2.8400
3.5kg/ 50kg of cement = 40.5x3.5/50=2.84kg
9977 Carriage of pigment & marble powder etc. L.S. 3.6400
LABOUR

9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.9.2 Light shade pigment with white cement

11.9.1 Rate as per item no 11.9.1 of SH: Flooring sqm 10.0000
Add difference of cost due to using light shade pigment
instead of dark shade pigment
Add for
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light kilogram 2.8400
shade pigment
Deduct for
0874 Black colour dark shade pigment kilogram -2.8400
Add difference of cost due to using white cement instead of
grey cement
Add for
Deduct for
0367 Portland Cement tonne -0.0405
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.9.3 Medium shade pigment with 50% white cement and 50%
ordinary cement
Add for
0876 Green or blue medium shade pigment kilogram 2.8400
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.9.4 White cement without any pigment

MATERIAL
For under layer of 34mm thick
LABOUR

9999 Sundries L.S. 161.4600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.9.5 Light shade pigment with ordinary cement

Add for
shade pigment
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say
11.9.6 Ordinary cement without any pigment

Less cost of dark shade pigment
Deduct for
9999 Deduct for carriage of pigment L.S. -3.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say
11.1 40 mm thick marble chips flooring, rubbed and polished to

12.5 mm nominal size) and top layer 9 mm thick with white,
black, chocolate, grey, yellow or green marble chips of sizes
proportion of 4:7 (4 cement marble powder : 7 marble chips)
by volume, including cement slurry etc. complete.
11.10.1 Dark shade pigment with Ordinary cement

MATERIAL
For Under layer of 31 mm thick
0788 Marble chips large size above 4 mm White & black quintal 1.4000
3.5kg/ 50kg of cement = 57.80x3.5/50=4.05kg
LABOUR

9999 Sundries L.S. 134.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say

Add for
shade pigment
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
ordinary cement
Add for
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.10.4 hite cement ithout any pigment

MATERIAL
For Under layer of 31 mm thick
LABOUR
0127 Driver (for Road Roller, Concrete Mixer, Truck etc.)
day 0.0300

9999 Sundries L.S. 134.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say

Add for
shade pigment
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say

MATERIAL
For under layer 31 mm thick
LABOUR

9999 Sundries L.S. 134.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.11 40 mm thick marble chips flooring, rubbed and polished to

12.5 mm nominal size) and top layer 12 mm thick with white,
black, chocolate, grey yellow or green marble chips of sizes
proportion of 2:3 (2 cement marble powder mix : 3 marble
chips) by volume, including cement slurry etc. complete :
11.11.1 Dark shade pigment with ordinary cement

MATERIAL
For top layer 12mm thick
@ 3.5kg/50kg of cement
= 81x3.5/50=5.67kg
9977 Carriage of pigment and marble powder etc. L.S. 6.2400
LABOUR

9999 Sundries L.S. 156.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

shade pigment
Deduct
Add Difference of cost due to using white cement instead of
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
ordinary cement
Add difference of cost due to using Medium shade pigment
Add for
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.11.4 White cement without any pigment

MATERIAL
2202 Carriage of Stone aggregate below 40 mm nominal
size cum 0.2500
For Top layer 12 mm thick
LABOUR

9999 Sundries L.S. 156.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

11.11.1 Rate as per Item Number 11.11.1 of SH:Flooring sqm 10.0000
Add difference of cost due to using Light shade pigment
Add for
shade pigment
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
For Top layer 12mm thick
LABOUR

9999 Sundries L.S. 156.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12 Marble chips skirting up to 30 cm height, rubbed and polished

to granolithic finish, top layer 6 mm thick with white, black,
chocolate, grey, yellow or green marble chips of sizes from
smallest to 4 mm nominal size, laid in cement marble powder
mix 3:1 (3 cement : 1 marble powder) by weight in proportion
of 4:7 (4 cement marble powder mix : 7 marble chips) by
volume :
11.12.1 18 mm thick with under layer 12 mm thick in cement plaster

1:3 (1 cement : 3 coarse sand) :
11.12.1.1 Dark shade pigment with ordinary cement
MATERIAL
For under layer of 12mm thick Cement mortar 1:3 (1 cement :
3 coarse sand) = 0.144 +
Extra for rounding= 0.03
Total = 0.174
Top layer 6mm thick
@ 3.5kg/50kg of cement
=40.5x3.5/50=2.84kg
LABOUR
9999 Sundries L.S. 201.8900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1.2 Light shade pigment with white cement

11.12.1.1 Rate as per Item Number 11.12.1.1 of SH: Flooring sqm 10.0000
Add for
shade pigment
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1.3 Medium shade pigment with 50% white cement and 50%
ordinary cement
11.12.1.1 Rate as per Item Number 11.12.1.1 of SH:Flooring sqm 10.0000
Add difference of cost due to using medium shade pigment
Add for
Deduct for
grey cement
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1.4 White cement without any pigment

MATERIAL
For under layer of 12mm thick Cement mortar 1:3 (1 cement :
3 coarse sand) = 0.144+
Extra for rounding = 0.03
Total =0.174
Top layer 6mm thick
LABOUR
9999 Sundries L.S. 201.8900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1.5 Light shade pigment with ordinary cement

Add difference of cost due to using Light shade pigment
Add for
shade pigment
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1.6 Ordinary cement without any pigment

Less cost of dark shade pigment
Deduct for
9999 Deduct for Carriage of pigment L.S. -3.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.13 Providing and fixing glass strips in joints of terrazo/ cement

concrete floors.
11.13.1 40 mm wide and 4 mm thick
Details of cost for 10 metre length
MATERIAL
Glass strips = 10m
Add 10% for wastage = 1m
Total = 11m
1149 Glass strip 4 mm thick40 mm deep metre 11.0000
9977 Carriage of glass L.S. 2.7300
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
11.14 Extra for laying terrazo flooring on staircase treads not

exceeding 30 cm in width, including cost of forming, nosing
etc.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm.
Cost of 1sqm.
Say
11.15 Crazy marble stone flooring, including filling the gaps with
light shade pigment with white cement marble powder
mixture (3 parts of white cement : 1 part of marble powder)
by weight in proportion of 4:7 (4 cement marble powder mix :
7 white, black or white and black marble chips of sizes from 1
mm to 4 mm nominal size by volume), with under layer 25
mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 12.5 mm nominal size), including
rubbing, polishing and cement slurry etc. complete :
11.15.1 18 mm thick crazy marble stone white, black or as specified

Under layer 25mm thick of cement Concrete
1:2:4 -10x0.025=0.25 cum
11.7 Rate as per Item Number 11.7 of SH: Flooring cum 0.2500
Cement slurry for subgrade and under large cement
Labour for applying cement slurry
LABOUR
Top layer with marble pieces and gap filling with marble
powder mixture Marble pieces for crazy flooring (Assume 70%
of marble stone are and 30% of joint filer/mixture
7sqmx0.02m = 0.14 cum
0.872x0.14/0.051 = 2.40q
2710 White marble makrana second quality plain veined stone quintal 2.4000
pieces for crazy flooring
shade pigment
@ 3.5kg/50kg of cement =
40.5x3.5/50=2.84kg
9977 Carriage of pigment & marble powder L.S. 3.6400
slab
Labour for finishing, polishing and fixing-
9999 Sundries including carborundum etc. L.S. 134.5500
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Sqm.
Cost of 1sqm.
Say
11.16 Precast terrazo tiles 22 mm thick with graded marble chips of

size up to 12 mm, laid in floors, and landings, jointed with
neat cement slurry mixed with pigment to match the shade of
the tiles, including rubbing and polishing complete, on 20 mm
thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :
11.16.1 Light shade pigment using white cement

MATERIAL
1201 Precast terrazo tiles 22 mm thick (light shade) sqm 11.0000
including 10% wastage
Grey cement for slurry @ 4.4kg/sqm.
for grouting
shade pigment
LABOUR
9999 Sundries including pigment wherever required and L.S. 161.9800
carborundum stone etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.16.2 Medium shade pigment using 50% white cement and 50%
ordinary cement
MATERIAL
1202 Precast terrazo tiles 22 mm thick (medium shade)
including 10% wastage sqm 11.0000
Cement mortar 1 : 4 (1 cement :4 coarse sand)
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
50% white cement for grouting
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.16.3 Dark shade pigment using ordinary cement

MATERIAL
1203 Precast terrazo tiles 22 mm thick (dark shade)
Ordinary cement for
(i) Cement slurry @ 4.4kg/sqm = 44kg+
(ii) Grouting = 44 kg.
Total = 88kg or 0.088 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
1203 Precast terrazo tiles 22 mm thick (dark shade)
Ordinary cement for
LABOUR
9999 Sundries including carborundum stone etc. L.S. 161.9800
Less for dark pigment [3.08+2.64=5.92 (for tiles)]
0874 Sundries including pigment wherever required and kilogram -5.9200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.17 Extra if terrazo tiles are laid in treads of steps not exceeding
30 cm in width.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.18 Precast terrazo tiles 22 mm thick with graded marble chips of
sizes up to 12 mm, in skirting and risers of steps not exceeding
30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement
: 3 coarse sand), jointed with neat cement slurry mixed with
pigment to match the shade of the tiles, including rubbing and
polishing complete with tiles of :

MATERIAL
1201 Precast terrazo tiles 22 mm thick (light shade) sqm 11.0000
For slurry
For buttering tiles bed sides =44 kg. +
For grouting =22 kg.
Total = 66 kg
shade pigment
66x3.5/50 = 4.62
LABOUR
9999 Sundries including pigment wherever required, carborundum L.S. 161.4600
stone and polishing powder etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.18.2 Medium shades pigment using 50% white cement and 50%
ordinary cement
MATERIAL
1202 Precast terrazo tiles 22 mm thick (medium shade) sqm 11.0000
including wastage & breakage
50% white cement for slurry
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
1203 Precast terrazo tiles 22 mm thick (dark shade) sqm 11.0000
Grey cement for slurry
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
1203 Precast terrazo tiles 22 mm thick (dark shade) sqm 11.0000
Grey cement for slurry
LABOUR
Less for dark shade pigment
[4.62+2.84 (for tiles)]
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.19 Chequered terrazo tiles 22 mm thick with graded marble chips
of size up to 6 mm in floors, jointed with neat cement slurry
mixed with pigment to match the shade of the tiles, including
rubbing and polishing complete, on 20 mm thick bed of
cement mortar 1:4 (1 cement :4 coarse sand) :

MATERIAL
1227 Chequered terrazo tiles 22 mm thick (light shade) sqm 11.0000
Cement mortar 1 : 4 (1 cement :
4 coarse sand)
Grey cement for slurry @ 4.4kg/sqm
White cement for grouting
shade pigment
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.19.2 Medium shade pigment using 50% white cement, 50%

ordinary cement
MATERIAL
1228 Chequered terrazo tiles 22 mm thick (medium shade) sqm 11.0000
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
50% white cement for grouting
Labour and sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
1229 Chequered terrazo tiles 22 mm thick (dark shade) sqm 11.0000
4 coarse sand)
Ordinary cement for
Labour & sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
1229 Chequered terrazo tiles 22 mm thick (dark shade) sqm 11.0000
4 coarse sand)
Ordinary cement for
Labour & sundries
Less for dark shade pigment [3.08+2.84(for tiles)]
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.20 Chequered precast cement concrete tiles 22 mm thick in

footpath & courtyard, jointed with neat cement slurry mixed
with pigment to match the shade of tiles, including rubbing
and cleaning etc. complete, on 20 mm thick bed of cement
mortar 1:4 (1 cement: 4 coarse sand).

MATERIAL
7070 Chequered precast cement concrete tiles 22mm thick using sqm 11.0000
marble chips of size 6mm - Light shade using white cement

Grey cement slurry @ 4.4kg @sqm
White cement for grouting
shade pigment
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.20.2 Medium shade pigment using 50% white cement 50% Grey
cement
MATERIAL
7237 Precast chequered cement tiles 22 mm thick medium shade sqm 11.0000
using 50% white cement, 50% ordinary cement
Grey cement for slurry @ 4.4kg/sqm. = 44 kg.+
grey cement for grouting 2.4kg/sqm. = 24kg.
Total = 68 kg
White cement for grouting @ 2.4kg/sqm. = 24 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
7236 Precast chequered cement tiles 22 mm thick Dark shade using sqm 11.0000
ordinary cement
Grey cement for slurry @ 4.4kg/sqm.
= 44 kg.+ For grouting = 48 kg.
Total=92 kg. say 0.092 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say

MATERIAL
7236 Precast chequered cement tiles 22 mm thick Dark shade using sqm 11.0000
ordinary cement
Grey cement for slurry @ 4.4kg/sqm. = 44 kg +
For grouting = 48 kg.
Total = 92 kg. Say 0.092 tonne
LABOUR
Less for dark shade pigment [3.08+2.84 (for tiles)]
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.21 Providing and fixing 10 mm thick acid and/or alkali resistant

tiles of approved make and colour using acid and/or alkali
resisting mortar bedding, and joints filled with acid and/or
alkali resisting cement as per IS : 4457, complete as per the
direction of Engineer-in- Charge.
11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof

cement : 4 coarse sand)
11.21.1.1 Acid and alkali resistant tile
MATERIAL
Acid proof tiles of size 300x300mm,
10mm thick = 11.11nos+
Add wastage and breakage @ 2.5% = 0.28 nos.
Total = 11.39 nos. Say 12 nos.
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 1.2000

9999 Mortar for pointing in acid/alkali resistant cement L.S. 40.4300
Cement for slurry over bed @ 3.3kg per sqm
Difference of cost for using acid proof cement instead of
ordinary cement
Add
7024 Acid Proof cement tonne 0.0079
Deduct
LABOUR
9988 Sundries including carriage of cement etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
11.21.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof

11.21.2.1 Acid and alkali resistant tile
MATERIAL
Acid proof tiles of size 300x300mm,
10mm thick = 11.11nos+
Add wastage and breakage @ 2.5% = 0.28 nos.
Total = 11.39 nos. Say 12 nos.
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 1.2000

Difference of cost for using acid proof cement instead of
ordinary cement
Add
Deduct
9999 Mortar for pointing in acid proof cement L.S. 40.4300
Acid proof cement for slurry over plaster 3.3kg/sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
11.22 Tile work in skirting, risers of steps and dado up to 2 m height
over 12 mm thick bed of cement mortar 1:3 (1 cement :3
coarse sand) and jointed with grey cement slurry @ 3.3
kg/sqm, including pointing in white cement mixed with
pigment of matching shade complete.
11.22.1 Marble tiles (polished) Raj Nagar

11.22.1.1 8 mm thick
MATERIAL
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 1.0610
including wastage
12mm thick Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement for slurry @ 3.3kg/sqm
9999 Pigment L.S. 2.0800
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm.
Say
11.23 Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20
mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with grey cement slurry,
including rubbing and polishing complete with :
11.23.1 Makrana white second quality

MATERIAL
20mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
6001 White marble slab Makrana second quality plain veined 18 sqm 11.5000
mm thick
Base Cement mortar 1 : 4 (1 cement : 4 coarse sand)
Cement for slurry @4.4kg/sqm.
(i) for bedding = 44 kg+
(ii) for jointing = 6 kg.
Total = 50 kg
9977 Carriage of marble slab L.S. 26.9100
LABOUR
(for finishing, polishing and fixing)
9988 Sundries and carriage of cement etc. L.S. 134.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.23.2 Raj Nagar plain

MATERIAL
Total = 11.50sqm.
7071 White marble Raj Nagar plain 18 mm thick up to 0.50 sqm sqm 11.5000
area
Cement for slurry @, 4.4kg sqm.
Total = 50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.23.3 Agaria White

MATERIAL
Total = 11.50sqm.
7850 Agaria White marble slab plain 18mm thick sqm 11.5000
Cement for slurry @ 4.4kg sqm.
Total = 50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.23.4 Black Zebra

MATERIAL
Total = 11.50sqm.
6019 Black Zebra marble slab plain 18mm thick sqm 11.5000
Cement for slurry @, 4.4kg sqm.
Total = 50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
\
11.23.5 Udaipur green marble
MATERIAL
Total = 11.50sqm.
6010 Udaypur green marble slab plain 18mm thick sqm 11.5000
Total = 50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
\
11.23.6 Pink plain marble
MATERIAL
Total = 11.50sqm.
6007 Pink marble slab plain 18mm thick sqm 11.5000
Total = 50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.24 Extra for pre finished nosing to treads of steps of marble

stone.
LABOUR
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost for 1metre
Say
11.25 Extra for marble stone flooring in treads of steps and risers
using single length up to 2.00 metre.
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.26 Kota stone slab flooring over 20 mm (average) thick base laid
over and jointed with grey cement slurry mixed with pigment
to match the shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :
11.26.1 25 mm thick
MATERIAL
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm 11.5000
slab
Cement for slurry-(i) for bedding = 44kg+
(ii) for joints = 20 kg.
Total = 64 kg. or 0.064 tonne
LABOUR
9999 Sundries L.S. 208.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado

and pillars laid on 12 mm (average) thick cement mortar 1:3 (1
cement: 3 coarse sand) and jointed with grey cement slurry
mixed with pigment to match the shade of the slabs, including
rubbing and polishing complete.

MATERIAL
1168 Kota stone slab 20 mm to 25 mm thick (semi- polished) sqm 11.5000
slab
for slurry
LABOUR
9999 Sundries L.S. 174.9800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.28 40 mm thick fine dressed stone flooring over 20 mm (average)

thick base of cement mortar 1:5 (1 cement : 5 coarse sand)
with joints finished flush.
MATERIAL
Finished work = 10 sqm
Add for wastage @ 10% = 1 sqm
Total = 11 sqm
9977 Carriage L.S. 34.0600
(i) for beading = 0.224 cum+
(ii) for joining = 0.026 cum.
Total=0.250cum.
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say

MATERIAL
Total = 11 sqm
9977 Carriage L.S. 34.0600
5 coarse sand)
Total=0.250cum.
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.29 40 mm thick fine dressed stone flooring over 20 mm (average)

thick base of cement mortar 1:5 (1 cement : 5 coarse sand),
including pointing with cement mortar 1:2 (1 cement : 2 stone
dust) with an admixture of pigment to match the shade of
stone.

MATERIAL
Total = 11 sqm
9977 Carriage L.S. 34.0600
Total=0.250cum.
Cement mortar 1:2 (1 Cement : 2 stone dust for pointing)
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say

MATERIAL
Total = 11 sqm
9977 Carriage L.S. 34.0600
Total=0.250cum.
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.30 40 mm thick rubbed stone flooring over 20 mm (average)
with joints 3 mm thick, side buttered with cement mortar 1:2
(1 cement : 2 stone dust) admixed with pigment to match the
shade of stone and pointing with same mortar.

MATERIAL
Total = 11 sqm
9977 Carriage L.S. 34.0600
Total=0.250cum.
LABOUR
9999 Sundries L.S. 26.9100
Labour for rubbing of stone
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say

MATERIAL
Total = 11 sqm
9977 Carriage L.S. 34.0600
Total=0.250cum.
LABOUR
9999 Sundries L.S. 26.9100
Labour for rubbing of stone
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.31 Extra for pre finished nosing in treads of steps of Kota stone/
sand stone slab.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10metre
Cost for 1 metre
Say
11.32 Extra for Kota stone/ sand stone in treads of steps and risers
using single length up to 1.05 metre.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.33 25 mm wooden planking, tongued and grooved in flooring,

including fixing with iron screws complete with :

Details of cost for 2.5x4=10 sqm.
MATERIAL
Second class Indian teak wood
No of joints = 4000/138 = 28.97
Total = (29-1) = 28 nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
Total = 0.2981 cum = 298.1 cudm
0682 Oxidised mild steel screws 50 mm (slotted counters sunk head 100 Nos 2.0000
type)
LABOUR
9999 Sundries for glue etc. L.S. 33.2800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1sqm.
Say
11.33.2 Second class deodar wood

Details of cost for 2.5x4=10 sqm.
MATERIAL
Second class deodar wood planks
No of joints = 4000/138 = 28.97
Total = (29-1) = 28 nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
Total = 0.2981 cum = 298.1 cudm
1194 Second class deodar wood in planks 10 cudm 29.8100
2500 Extra for selected planks of second class deodar wood 10 cudm 29.8100
0682 Oxidised mild steel screws 50 mm (slotted counters sunk head 100 Nos 2.0000
type)
LABOUR
9999 Sundries for glue etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1sqm.
Say
11.34 38 mm thick wood block flooring of first class teak wood laid
over 25 mm thick levelling layer of cement concrete 1:2:4 (1
nominal size) to be paid separately, coated with a thin layer of
hot bitumen penetration 80/25 (blown type) @ 2.45 kg per
sqm, including fixing blocks in position after dipping in hot
bitumen (blown type) up to half depth, planed, levelled
smooth and finished complete.

Bitumen blown type
i) For bed layer @ 2.45kg/sqm. = 2.45kg+
ii) For dipping blocks L.S. = 2.00Kg.
Total = 4.45kg.
approved quality
1st class teal wood in scanting for wooden blocks
1 sqm x 0.038 m = 0.038 cum
Add 10 % wastage = 0.0038 cum
Total = 0.0418 cum or 41.8 cudm
1187 First class teak wood in scantling 10 cudm 4.1800
LABOUR
9999 Sundries such as fuel, kerosene oil,
sand paper etc. L.S. 80.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm.
Say
11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing

with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end
60cm apart (minimum three lugs to be provided), including
necessary welding and applying a priming coat of approved
primer on exposed surface etc. complete.
Details of cost for 3m (11.40+0.24kg = 11.64kg)
MATERIAL
Angle iron 50x50x5 mm =3 m
Add wastage @ 5% = 0.15 m
Total=3.15 m @ 3.80 kg per m =
11.97 kg Say 0.12 qtl
Lugs 10x5 mm flat = 6x0.10 = 0.60 m@
0.40 kg per m = 0.24 kg
Total 0.252 kg or 0.0025 qtl
6cm (lugs)
LABOUR
Priming coat 3x0.20 = 0.60 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.64 kg.
Cost per 1 Kg.
Say
11.37 Providing and laying Ceramic glazed floor tiles of size 300x300
mm (thickness to be specified by the manufacturer) of 1st
quality conforming to IS : 15622 of approved make in colours
such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing
with grey cement slurry @ 3.3 kg/sqm including pointing the
joints with white cement and matching pigment etc.,
complete.

MATERIAL
Glazed Ceramic floor tiles 300x300 mm
size = 1.000 sqm
Total = 1.025 sqm
7801 Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and sqm 1.0250
designs of White, Ivory, grey, Fuem Red brown etc.

20 mm thick Cement mortar 1 : 4 (1 cement : 4 coarse sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.37A Providing and fixing 1st quality ceramic glazed floor tiles
conforming to IS : 15622 (thickness to be specified by the
manufacturer ) of approved make in all colours, shades except
burgundy, bottle green, black of any size as approved by
Engineer-in-Charge in skirting, risers of steps and dados over
12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm
including pointing in white cement mixed with pigment of
matching shade complete.

Detail of Cost for 1.00 Sqm
Material
Glazed Ceramic Floor Tile = 1.00 Sqm+
Add for wastage and breakage @2.5% = 0.025 Sqm
Total =1.025 Sqm
7801 Ceramic glazed floor tiles 1st quality conforming to IS : 15622 sqm 1.0250
9999 Carriage of Tiles L.S. 6.2400

3.8 Cement mortar 1:3 (1 Cement: 3 Coarse Sand) cum 0.0140
0367 Cement for slurry over bed @3.3 Kg/Sqm tonne 0.0033
Labour
0123 Mason 1st Class day 0.2500
9999 Sundries including carriage of Cement etc L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost 1 sqm
Say
Z
11.38 Providing and laying Ceramic glazed floor tiles of size 300x300
mm (thickness to be specified by the manufacturer), of 1st
quality conforming to IS : 15622, of approved make, in all
colours, shades, except White, Ivory, Grey, Fume Red Brown,
laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m
including pointing the joints with white cement and matching
pigments etc., complete.

MATERIAL
Glazed Ceramic floor tiles 300x300 mm size = 1.000 sqm
Total = 1.025 sqm
7802 Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs sq.m. 1.0250
except White, Ivory, Grey, Fuem Red Brown etc.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.39 Providing and laying rectified Glazed Ceramic floor tiles of size
300x300 mm or more (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in colours White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including grouting the joints with white cement and matching
pigments etc., complete.

MATERIAL
Rectified Ceramic Glazed floor tiles 300x300 mm size = 1.000
sqm
Total = 1.025 sqm
7803 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more sq.m. 1.0250
in all shades designs White, Ivory, Grey, Fuem Red Brown etc.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.4 Providing and laying rectified Glazed Ceramic floor tiles of size
300x300 mm or more (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in all colours, shades, except White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar
1:4 (1 Cement : 4 Coarse sand), jointing with grey cement
slurry @ 3.3 kg/ sqm including pointing the joints with white
cement and matching pigments etc., complete.

MATERIAL
Rectified Ceramic Glazed floor tiles 300x300 mm size or more
= 1.000 sqm
Total = 1.025 sqm
7804 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more sq.m. 1.0250
in all shades designs except White, Ivory, Grey, Fuem Red
Brown etc.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.41 Providing and laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS: 15622, of
approved make, in all colours and shades, laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse sand), jointing with
grey cement slurry @ 3.3 kg/ sqm including grouting the joints
with white cement and matching pigments etc., complete.
11.41.1 Size of Tile 500x500 mm

MATERIAL
Vitrified floor tiles 50x50 cm size = 1.000 sqm
Total = 1.025 sqm
8620 Vitrified floor tile 50x50 cm sqm 1.0250
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.41.4 Size of Tile 1000x1000 mm

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.41A Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid
on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments
etc. The tiles must be cut with the zero chipping diamond
cutter only . Laying of tiles will be done with the notch trowel,
plier, wedge, clips of required thickness, levelling system and
rubber mallet for placing the tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size

11.41A.1.1 Size of Tile 600 x 600 mm
MATERIAL
Double Charged vitrified floor tiles 60 x 60 cm size =1.00 sqm+
Add wastage & breakage @2.5% =0.025 sqm.

Total = 1.025 sqm
2752 Double charge vitrified tile polished finish of size 60 x 60 cm sqm 1.0250

0367 Portland cement tonne 0.0033
9999 For notch trowel, Lier, wedge, clips of required thickness, L.S. 2.5000
levelling system and rubber mallet etc.
LABOUR
9988 sundries including carriage of quick set polymer etc. L.S. 26.9100
TOTAL
Add 1% Water charges on "W"
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.1.2
Size of Tile 800 x 800 mm
MATERIAL
Double Charged vitrified floor tiles 80 x 80 cm size =1.00 sqm+

Total =1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.1.3
MATERIAL
Double Charged vitrified floor tiles 60 x 120 cm size =1.00
sqm+
Total = 1.025 sqm

3.9 Rate as per Item Number 3.9 of SH: Mortars Cum 0.0240
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.1.4
MATERIAL
sqm+
Total =1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.1.5 Size of Tile 1000 x 1000 mm

MATERIAL
sqm+
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.2 Glazed vitrified floor tiles polished finish of size

11.41A.2.1 Size of Tile 600 x 600 mm
MATERIAL
Glazed vitrified floor tiles 60 x 60 cm size =1.00 sqm+
Total = 1.025 sqm
2757 Glazed vitrified tiles polished finish of size 60 x 60 cm sqm 1.0250
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.2.2 Size of Tile 600 x 1200 mm

MATERIAL
Glazed vitrified floor tiles 60 x 120 cm size=1.00 sqm+
Add wastage & breakage @2.5% =0.025 sqm
. Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.2.3 Size of Tile 800 x 800 mm

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.2.4 Size of Tile 800 x 1200 mm

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.2.5
MATERIAL
. Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

11.41A.3.1 Size of Tile 600 x 600 mm
MATERIAL
Glazed Vitrified tiles Matt/Antiskid finish 60 x 60 cm size =1.00
sqm+
. Total = 1.025 sqm
2762 Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm sqm 1.0250

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.3.2 Size of Tile 600 x 1200 mm

MATERIAL
Glazed Vitrified tiles Matt/Antiskid finish 60 x 120 cm size
=1.00 sqm+
Total = 1.025 sqm

9999 For notch trowel, plier, wedge, clips of required thickness, L.S. 2.5000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.3.3 Size of Tile 800 x 800 mm

MATERIAL
sqm+
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.3.4 Size of Tile 800 x 1200 mm

MATERIAL
Glazed Vitrified tiles Matt/Antiskid finish 80 x 120 cm size
=1.00 sqm+
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.41A.3.5 Size of Tile 1200 x 1200 mm

MATERIAL
sqm+
. Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1sqm
Say
11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1

cement : 4 coarse sand) bedding in laying of floor tiles and
jointing with grey cement slurry @ 3.3 kg/ sqm.

MATERIAL
LABOUR
9988 Sundries i/c carriage of cement etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based
high polymer modified quick-set tile adhesive (Water based)
conforming to IS: 15477, in average 3mm thickness.

MATERIAL
8731 High polymer modified quickset tile adhesive. per kg 5.0000
LABOUR
9988 Sundries i/c carriage of cement etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.44 Crazy ceramic tile flooring, with under layer 12 mm thick

cement mortar 1:4 (1 cement: 4 coarse sand), with joints not
exceeding 5 mm, including filling the gaps with ordinary
cement mixture & mixing with synthetic polyester fibre,
triangular in shape having specific gravity of 1.34 to 1.40,
cross section size ranging from 10 to 40 micron & length up to
6 mm , mixing fibre @ 125 grams per 50 kg of cement in
cement mortar, including providing and mixing water proofing
material in mortar @ 1 kg per 50 kg of cement, all complete as

MATERIAL
Under layer 12 mm thick Cement mortar 1:4 (1 cement : 4
coarse sand).
3.9 Rate as per Item No.3.9 of Shorter cum 0.1400
LABOUR
Cement slurry for subgrade
Labour for applying cement slurry
Top layer with tile piece and gap filling with cement mortar:
Ceramic tile piece for crazy flooring

assuming 70% tile area and 30% of joint filler/mixture.
(7.00x0.010)=0.07
0.872x0.07/0.051=1.20 qtl
2709 Ceramic Tiles Pieces for Crazy Flooring quintal 1.2000
Cement mortar 1:4 for filling of crazy tile
:(300x0.01=0.03)
Synthetic polyester triangular
4.18 Rate as per Item No.4.18 of SH: CONCRETE WORK per bag of 1.3800
50kg of
cement
Water proofing compound

4.12 Rate as per Item No.4.12 of SH:CONCRETE WORK per bag of 1.3800
50kg of
cement

9999 Sundries L.S. 67.2500
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.45 Providing and laying 500x500x40 mm thick Turf paver

(Turfpave XD) on 150 mm thick sub grade of compacted bed
of 20 mm thick nominal size stone aggregate and base course
and filling with 150 mm thick jamuna sand, including
spreading, well ramming, consolidating and finishing smooth
etc. all complete as per direction of Engineer-in-charge.
MATERIAL
1 x 10 x 0.15 = 1.5cum
2202 Stone aggregate below 40 mm nominal size cum 1.5000
LABOUR
for spreading ramming and consolidation of sub grade
Providing and filling Jamuna sand
2.27 Rate as per Item No.2.27 of SH: EARTH WORK cum 1.5000
2708 Truf Paver (500 x 500 x 40 mm) sqm 10.0000
Labour for laying of Turf pave
9999 Sundries L.S. 50.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.46 Providing and laying Vitrified tiles in different sizes (thickness

to be specified by manufacturer), with water absorption less
than 0.08 % and conforming to I.S. 15622, of approved make,
in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including
grouting the joint with white cement & matching pigments
etc. complete.

MATERIAL
Vitrified floor tiles 50 x 50 cm size = 1.00 sqm+
Add wastage & breakage @ 2.5% = 0.025 sqm
Total = 1.025 sqm
3.8 Rate as per Item No.3.8 of SH:Mortars cum 0.0140

Cement slurry over bed @ 3.3 kg per sqm
LABOUR
9988 Sundries including carriage of quick set polymer etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.46.4 Size of Tile 1000x1000 mm

MATERIAL
Total = 1.025 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.46A Providing and fixing glazed screen printed border tile 75mm
wide having thickness 5mm, of approved quality & make, in
all shades, design and prints, in dado, over 12mm thick bed of
cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing
with grey cement slurry @ 3.3 kg/sqm including pointing with
white cement mixed with pigment of matching shade, all
complete as approved by Engineer - in - Charge

Details for 1sqm (i.e. 13.33m length)
Material
8624 Border tiles 200x75mm size 5mm thick each 68.0000
Tile required=1.00/(0.20x0.075)=66.70 tile.
Add 2.5% wastage = 1.67 tile
Total 68.37 say 68 tiles
3.8 Cement mortar 1:3 for 12mm base cum 0.0140
0367 Cement for slurry over bed @ 3.3kg/sqm tonne 0.0033
Labour
0123 Mason 1st class each 0.2500
0115 Coolie each 0.2500
9999 Sundries 26.91-0.16=26.75 L.S. 26.7500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Details of cost for 1sqm i.e. 13.33 mts
Cost per metre
Say
11.47 Providing and laying Vitrified tiles in different sizes (thickness

to be specified by the manufacturer), with water absorption
less than 0.08% and conforming to IS: 15622, of approved
brand & manufacturer, in all colours and shade, in skirting,
riser of steps, laid with cement based high polymer modified
quick set tile adhesive (water based) conforming to IS: 15477,
in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.47.4 Size of Tile 1000x1000 mm

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.48 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated filler
of desired shade (0.10 kg of hardener and 0.20 kg of resin per
kg), including filling / grouting and finishing complete as per

MATERIAL
8682 Epoxy Grout Kg 0.2100
LABOUR
9988 Sundries including carriage L.S. 5.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.48.4 Size of Tile 1000x1000 mm

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.49 Providing and laying Vitrified tiles in floor with different sizes
(thickness to be specified by the manufacturer), with water
absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid
with cement based high polymer modified quick set tile
adhesive (water based) conforming to IS : 15477, in average 6
mm thickness, including grouting of joints (Payment for
grouting of joints to be made separately).

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.49.4 Size of Tile 1000x1000 mm

MATERIAL
Total = 1.025 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.5 Deduct for not grouting the joints with white cement and
matching pigment in the items of fixing of vitrified tiles.

MATERIAL
9999 Mortar for pointing in white cement with matching pigment L.S. 3.1200
9999 LABOUR L.S. 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
11.51 Providing and laying machine cut, mirror polished, Italian
Marble stone flooring laid in required pattern in linear portion
of the building all complete as per architectural drawings,
with 18 mm thick stone slab laid over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with white cement slurry @ 4.4 kg/sqm including
pointing with white cement slurry admixed with pigment to
match the marble shade including rubbing, curing and
polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.
11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona,

Details of cost per 10 sqm
MATERIAL
18 mm thick Italian marble stone slab 10.00 sqm
Add for wastage 15%= 1.50 sqm
Total: 11.50 sqm
1240 18 mm thick Italian Marble stone slab,
Base mortar1:4 (1 cement :4 coarse sand) sqm 11.5000
Cement for slurry@, 4.4 kg/sqm
(i) for bedding=44 kg+
(ii) for jointing= 6 kg
Total=50 kg
9999 carriage of marble slab L.S. 26.9100
LABOUR :
(for finishing , polishing and fixing)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.52 Providing and laying machine cut, mirror polished Marble
stone flooring, in required design (Simple geometrical,
abstract etc.) and in patterns in combination with Italian
marble stones of different colours, shades and finished
surface texture etc., in linear portions of the building, all
complete as per the architectural drawings, with 18 mm thick
stone slab laid over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
white cement slurry @ 4.4 kg/sqm, including pointing with
white cement slurry admixed with pigment to match the
marble shade, including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer-in-
Charge.
11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona,

MATERIAL
18 mm thick Italian marble stone slab 10.00 sqm
Add for wastage 20%= 2 sqm
Total: 12 sqm
1240 18 mm thick Italian Marble stone slab,
Base mortar1:4 (1 cement :4 coarse sand) sqm 12.0000
3.9 Rate as per Item No.3.9 of SH: MORTARS
Cement for slurry@, 4.4 kg/sqm
(i) for bedding=44 kg+
(ii) for jointing= 6 kg
Total=50 kg cum 0.2240
LABOUR :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sq.m.
Cost of 1 Sq.m.
Say
11.53 Providing and fixing Glass mosaic tiles on finished plain wall
surface of size 20 mm x 20 mm x 4 mm in all colour, design ,
fixing in customize design as per direction of Engineer-in-
Charge. The glass mosaic tiles to be fixed on the wall surface
with the help of approved adhesive applied at the rate of 2.5
kg per sqm and grouting of the same. The rate is inclusive of
all operation, material and required pattern approved by
Engineer-in-Charge:

MATERIAL
Glass mosaic tiles (20 mm x 20 mm x 4mm)
Add for wastage 2.5%= 0.2 sqm
Total: 8.20 sqm
1242 Glass mosaic tiles (20 mm x 20 mm x 4 mm) sqm 8.2000
1243 Tile fixing chemical adhesive kg 20.0000
1244 Cement Polymer Grout Compound kg 10.0000
1245 Acid for cleaning tiles litre 4.0000
LABOUR :
9999 Sundries including carriage of adhesive etc. L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 8.00 sqm
Cost for 1.00 sqm
Say
11.54 Providing and fixing removable raised/false access flooring
with system and its components of approved make for
different plenum height with possible height adjustment up to
50 mm, comprising of modular load bearing floor panels
supported on G.I. rectangular stinger frame work and G.I.
Pedestal etc. all complete, as per the architectural drawings,
as specified and as directed by Engineer-in-charge consisting
of:
(a) Providing at required spacing to form modular framework,

pedestals made out of GI tube of thickness minimum 2 mm
and 25 mm outer diameter, fully welded on to the G.I. Base
plate of size 100mm x 100mm x 3mm at the bottom of the
pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5
mm welded with GI fully threaded stud 16mm outer diameter
with two GI Check nuts screwed on the stud for level
adjustment up to 50mm, locking and stabilizing the pedestal
head in position at the required level. The pedestals shall be
fixed to the subfloor (base) through base plate using epoxy
based adhesive of approved make or the machine screw with
rawl plug.
(b) Stringers system in all steel construction hot dipped

galvanized of rectangular size 570x20x30x0.80mm thick
having holes at both ends for securing the stringers on to the
pedestal head using fully threaded screws ensuring maximum
lateral stability in all directions, the grid formed by the
pedestal and stringer assembly shall receive the floor panel,
this system shall provide adequate solid, rigid support for
access floor panel, the system shall provide a minimum clear
uninterrupted clearance between the bottom of the floor for
electrical conduits and wiring etc. all complete as per the
architectural drawings, as specified and as directed by the
Engineer-in-charge.
(c) Providing and fixing Access Floor panel of 600x600x32 mm
medium grade Filled Steel anti static high pressure Lamination
of 800H grade (FS800H). Access Floor panel shall be steel
welded construction with an enclosed bottom pan with
uniform pattern of 64 hemispherical cones. The top and
bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7
mm fused spot welded together (minimum 64 welds in each
dome and 20 welds along each flange). The panel should be
Corroresist epoxy coated for lifetime rust protection and
cavity formed by the top and bottom plate is filled with Pyro
grip non-combustible Portland cementitious core mixed with
lightweight foaming compound. The access floor shall be
factory finished with Anti-static High Pressure laminate with
Non Warp technology up to 1mm thickness for superior
adhesion and Surface flatness within 0.75mm.The panel is to
withstand a Concentrated Load of 363 kgs applied on area
25mm x 25mm without collapse in the centre of the panel
which is placed on four steel blocks. The panel will withstand
and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm
and an impact load of 50kg all complete as per the approved
manufacturers specification and as per the direction of
Engineer-in-charge. All specification must be printed on the
side of the panel to ensure the quality of the product.
11.54.1 300 mm Finished Floor Height (FFH)

Details of Cost for : 100.00 Sqm
MATERIALS :
2711 FS800H Grade Flooring Panel (i/c) 5% wastage each 292.0000
2712 Zinc Electroplated Pedestals - 300 mm each 360.0000
2714 Zinc Electroplated Tube Stinger each 570.0000
2715 Machine Screw for Fixing each 1140.0000
7048 Rawl Plug fl0or pedestal grouting on floor each 1440.0000
LABOUR :
0114 Beldar day 25.0000
9999 Sundries L.S. 329.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm
Say
11.54.2 450 mm Finished Floor Height (FFH).

Details of Cost for : 100.00 Sqm
MATERIALS :
2711 FS800H Grade Flooring Panel each 292.0000
2713 Zinc Electroplated Pedestals - 450 mm each 360.0000
2714 Zinc Electroplated Tube Stinger each 570.0000
2715 Machine Screw for Fixing each 1140.0000
LABOUR :
0114 Beldar day 25.0000
9999 Sundries L.S. 329.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm
Say
11.55 Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as curvilinear
portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average)
laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade
including rubbing, curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge :
11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
MATERIAL
18mm thick - Flamed finish granite slab = 10.00 sqm+
Add for wastage 15% =1.50 sqm,
Total 11.50 sqm
1239 18 mm thick Flamed finish granite stone slab sqm 11.5000
slab
LABOUR :
9999 Sundries L.S. 208.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as curvilinear
portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average)
laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade
including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red

or equivalent
MATERIAL
18 mm thick polished finish granite stone slab 10.00 sqm +
(Add for wastage 15%)= 1.50 sqm

Total = 11.50 sqm
7298 18 mm thick Polished finish granite stone slab of colour Black, sqm 11.5000
Cherry/Ruby Red (slab area above 0.5 sqm)
slab
0874 Black colour dark shade pigment kg 4.5000
9999 Mortar for pointing in white cement (11.22) L.S. 25.3500
LABOUR :
0019 Machine for cutting (hand grinding) day 2.0000
9999 Sundries L.S. 208.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.56.2 Polished Granite stone slab of all colour and texture except
Black, Cherry/Ruby Red
MATERIAL
18 mm thick polished finish granite stone slab 10.00 sqm +
(Add for wastage 15%)= 1.50 sqm

Total = 11.50 sqm
7299 18 mm thick Polished finish granite stone slab of all colour and sqm 11.5000
texture except Black, Cherry/Ruby Red (slab area more than
0.5 sqm)
slab
0874 Black colour dark shade pigment kg 4.5000
9999 Mortar for pointing in white cement (11.22) L.S. 25.3500
LABOUR :
0019 Machine for cutting (hand grinding) day 2.0000
9999 Sundries L.S. 208.1300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.1 Providing corrugated G.S. sheet roofing including vertical /

curved surface fixed with polymer coated J or L hooks, bolts
and nuts 8 mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with white lead,
including a coat of approved steel primer and two coats of
approved paint on overlapping of sheets complete (up to any
pitch in horizontal/ vertical or curved surfaces), excluding the
cost of purlins, rafters and trusses and including cutting to size
and shape wherever required.
12.1.1 1.00 mm thick with zinc coating not less than 275
gm/m²

Details of cost for a roof with each sloping side 18.09x5.10m
and slop being flatter than 1 vertical to 2.5 horizontal
Area of roof = 2x18.09x5.10 = 184.518 sqm.

MATERIAL
C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9 metre @19.35 Kg
each =1044.90Kg.
2x27=54 nos. of size
2.8x0.9@21.67kg. each =1170.18Kg.+
Total = 2215.08Kg.+
Add 5% Wastage = 110.75Kg.
Total = 2325.83 Kg = 23.26 quintals
3050 Galvanised steel corrugated sheets quintal 23.2600
2302 Carriage of G.I. sheet and accessories tonne 2.3260
G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e.
30cm centre to centre straight
Breadth is 5.1metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)x17 nos. = 884 nos.
head with slots
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side) 2x5x27
(No. of sheets)x23 nos. of bolts in each sheet = 810 nos.
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 81.0000

1207 G.I. Limpet washer 100 Nos 16.9400
(total of seam and J bolts)
884+810=1694
1208 Bitumen washer 100 Nos 16.9400
9977 Carriage of bolts and washers L.S. 26.9100
9999 Sundries L.S. 53.8200
LABOUR
0114 Beldar day 15.5000
4202 Red oxide Zinc chromate primer litre 2.5300
9999 Brushes, sand papers i/c sundries L.S. 50.5700
0845 Roofing paint for iron sheets in red colour litre 3.7500
9977 Carriage of paint L.S. 6.7600
9999 Brushes and Sandpapers L.S. 31.9800
9999 Sundries L.S. 38.0900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m²


Details of length and breadth.
Length 26(laps)x0.135(each lap)=3.51
Width of Corrugator sheet with 10 corrugation measured end
to end = 0.8 metres
27 (nos. of sheets)x0.80 (width of sheet) = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one side-
C.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
Total = 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
MATERIAL
C.G.S. Sheets 0.8mm thick
2x27=54nos. @15.82Kg.each = 854.38Kg (X)
2.5mx0.9m is the size of plain G.I.sheet which on being
corrugated will become 2.5mx0.8m
(The size of plain sheet is taken because the weight is
available only of plain sheets) (Refer I.S. Code 277- 1962)
2x27=54nos. of size.
2.8x0.9@17.72Kg each = 956.8Kg (Y)
Total of (X)+(Y) = 1811.16Kg.
Add wastage @5% = 90.56Kg.
Total = 1901.72Kg = 19.02q
G.I. scam bolts and nuts 60cm centre to centre zig zag i.e.
30cm. centre to centre straight Breadth is 5.1metre No. of
bolts in one lap 5.1/0.3 =17 nos.

head with slots
(No. of sheets)x23 Nos. of bolts in each sheet = 810 Nos

884+810=1694
9999 Sundries L.S. 53.8200
LABOUR
0114 Beldar day 15.5000
9999 Brushes, sand papers i/c sundries L.S. 50.5700
9999 Brushes and Sandpapers L.S. 31.9800
9999 Sundries L.S. 38.0900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Sqm.
Say
12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m²


Details of length and breadth.
Length 26(laps)x0.135(each lap)=3.51
Width of Corrugator sheet with 10 corrugation measured end
to end = 0.8 metres
27 (nos. of sheets)x0.80 (width of sheet) = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one side-
C.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
Total = 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
MATERIAL
C.G.S. Sheets 0.63mm thick
2x27=54nos. @12.82Kg.each = 692.28 Kg (X)
2.5mx0.9m is the size of plain G.I.sheet which on being
corrugated will become 2.5mx0.8m
(The size of plain sheet is taken because the weight is
available only of plain sheets) (Refer I.S. Code 277- 1962)
2x27=54nos. of size. 2.8x0.9 'at 13.38 Kg each = 775.44 Kg (Y)
Total of (X)+(Y) = 1467.72 Kg.

Add wastage @5% = 73.39 6Kg.
Total = 1541.11 Kg = 15.41 q
G.I. scam bolts and nuts 60cm centre to centre zig zag i.e.
30cm. centre to centre straight Breadth is 5.1metre No. of
bolts in one lap 5.1/0.3 =17 nos.

head with slots
(No. of sheets)x23 Nos. of bolts in each sheet = 810 Nos

884+810=1694
9999 Sundries L.S. 53.8200
LABOUR
Mistry day 1.3000
Carpenter 2nd class day 15.5000
Beldar day 15.5000
Red oxide Zinc chromate primer litre 2.5300
Carriage of material L.S. 0.5200
Painter day 1.1300
Coolie day 1.1300
Brushes, sand papers i/c sundries L.S. 50.5700
Roofing paint for iron sheets in red colour litre 3.7500
Carriage of paint L.S. 6.7600
Painter day 2.5300
Coolie day 2.5300
Brushes and Sandpapers L.S. 31.9800
Sundries L.S. 38.0900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Sqm.
Say
12.2 Extra for straight cutting in C.G.S. sheet roofing for making
opening of area exceeding 40 sq. decimetre for chimney
stacks, sky light etc.:
12.2.1 1.00 mm thick

Details of cost for 3 metres periphery
Assuming a hole of 10 dm x 5 dm area of the hole 50 dm2 and
the perimeter of the hole 3 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
12.2.2 0.80 mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
12.2.3 0.63 mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
12.3 Extra for circular cutting in C.G.S. sheet roofing for making
opening of area exceeding 40 sq. decimetre:
12.3.1 1.00 mm thick
Details of cost for 10 holes of 0.5 metre diameter
Perimeter of 10 nos 10x22/7x0.5 = 15.71 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metres
Cost of 1.00 metre
Say
12.3.2 0.80 mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.3.3 0.63 mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.4 Providing ridges or hips of width 60 cm overall width plain

G.S. sheet fixed with polymer coated J or L hooks, bolts and
nuts 8 mm dia G.I. limpet and bitumen washers complete.

Details of cost for 10.35 metres long ridge 0.80mm thick with
zinc coating not less than 275gm/m2
Consider the length of the ridge 10.35 metres.
The ridge will be made out of plain G.I. Sheets 0.9mx1.8m
Three pieces will be 0.9m long and 0.60m wide overlapping
22.5cm.
MATERIAL
G.I. plain sheets 0.80 thick 1.80x0.90m size 5 nos. @ 11.39Kg.
sheet = 56.95Kg +
Add 2% wastage = 1.14 Kg.
Total = 58.09 Kg. or 0.58 q.
0222 Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos 2.8000
25mmx6mm (There are 14 joints)
9977 Carriage of seam bolts and washers L.S. 1.8200
9999 Sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Details of cost for 10.35 metre long ridge.
G.I.plain sheets 0.63mm thick 1.8x0.9m size
5 nos. @9.23 Kg. per sheet = 46.15 Kg. +
Add 2% wastage = 0.91 Kg.
Total = 47.07 Kg.
Say 47 Kg.
9977 Carriage of seam bolts and washers L.S. 1.8200
9999 Sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.5 Providing valleys of 90 cm wide overall in plain G.S. sheet

fixed with polymer coated J, or L hooks, bolts and nuts 8 mm
dia G.I. limpet and bitumen washers complete :

Details of cost for 9.325m
MATERIAL
G.I. plain sheets 2.5x0.9m
4 nos. @ 29.95Kg/sheet =119.80Kg.+
Add 2% wastage = 2.40Kg.
Total = 122.20 kg. or 1.222q.
9977 Carriage of bolts, nuts and washers L.S. 0.9100
9999 Sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.6 Providing and fixing of 40 cm overall width plain G.S. shape

and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse
sand). sheet fixed with polymer coated J or L hooks, bolts and
nuts, G.l. limpet and bitumen washer complete, bent to

Consider a length of flashing 12.125 metres.
MATERIAL
G.I. plain sheet 1.25mm thick 3.2x0.75m
2 nos. @ 20.64 Kg. = 41.28 Kg.+
Add 2% wastage = 0.83 Kg
Total = 42.11 Kg. or 0.4211 quintal
(taking 2 bolts per joints)
9977 Carriage of G.I. seam bolts and washers L.S. 0.3900
9999 Sundries L.S. 10.7900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular
plain G.S. sheet gutter with iron brackets 40x3mm size, bolts,
nuts and washers etc., including making necessary
connections with rain water pipes complete.

0.80mm thick with zinc coating not less than 275gm/m2
Consider a length of 9.04m
Sheet used = 2.5x0.90m = 2 nos.
Wt. = 2x15.82=31.64 Kg. = 0.3164q
Total = 0.3164quintal
MATERIAL
head with slots
1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long each 30.0000
round head with slots
1210 G.I. plain washer thin 100 Nos 0.7000
LABOUR
9999 Sundries L.S. 12.6100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.04 metres
Cost of 1.00 metre
Say
0.63mm thick with zinc coating not less than 275gm/m2
Sheet used = 2.5x0.90m = 2 nos.
Wt. = 2x11.82=23.64 Kg. = 0.2364q
Total = 0.2364quintal
MATERIAL
head with slots
LABOUR
9999 Sundries L.S. 12.6100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.04 metres
Cost of 1.00 metre
Say
12.8 Providing reinforced by organic fibres and/or inorganic

synthetic fibres cement 6 mm thick corrugated sheets (as per
IS: 14871) roofing up to any pitch and fixing with polymer
coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and
bitumen washers or with self drilling fastener and EPDM
washers etc. complete (excluding the cost of purlins, rafters
and trusses), including cutting sheets to size and shape
wherever required.

Details of cost for 216.14 sqm area of roof up to 60° pitch
Up to 60 degree pitch
Consider a shed of 20x10 metres. (External dimensions of
plinth).
Area of roof- 20.2x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 2x20 nos.x3.00mx1.05m =126.00sqm+
2x20nos.x2.50mx1.05m=105.00sqm.
Total = 231.00sqm. +
Total = 237.93sqm.
0223 Fibre reinforced by organic fibres and/or inorganic synthetic sqm 237.9300
fibres cement corrugated sheet 6mm thick
2x20x0.42147 = 1.68588 +
2x20x0.35123= 1.4049
Total = 3.0908+
Add 3 % wastage = 0.092
Total = 3.1835 Say 3.184 t
1209 G.I. plain washer thick 100 Nos 4.7600
9977 Carriage of bolts and nuts, washers etc. L.S. 8.0600
9999 Sundries L.S. 39.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
12.9 Extra for straight cutting in reinforced by organic fibres and/or

inorganic synthetic fibres cement corrugated, semi corrugated
6 mm thick sheet roofing for making openings of area
exceeding 40 square decimetre for chimney stacks, skylights
etc.

Details of cost for 3 metres of periphery
Area of cutting 0.9mx0.6m=0.54sqm.
Perimeter = 3 metres
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.00 metres of periphery
Cost of 1.00 metre of periphery
Say
12.1 Extra for circular cutting in reinforced by organic fibres and/or

inorganic synthetic fibres cement corrugated/ semi
corrugated 6 mm thick sheet roofing for making openings of
area exceeding 40 square decimetre.

i.e. 9.05 metre periphery
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.05 metres of periphery
Cost of 1.00 metre of periphery
Say
12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron
section.
Extra for providing and fixing wind ties of 40x6mm flat iron
section.
M.S. flat 40x6mm = 30 metres+
wastage @ 5% = 1.5 metres
= 31.50 metres @ 1.9 Kg per metre
= 59.85 Kg. = 0.5985 quintal
9999 Sundries L.S. 20.6700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.12 Providing and fixing ridges and hips in fibre cement reinforced
by organic fibres and/or inorganic synthetic fibres roofing with
suitable fixing accessories or self drilling fastener and EPDM
washer etc. complete.
12.12.1 Corrugated serrated adjustable ridges

Details of cost for length of ridge 20.2 metres
One piece corrugated serrated adjustable ridges
Consider a shed of 20x10m (external dimensions at plinth).
Length of ridges 20.2 metre

MATERIAL
Ridge piece required each of 1.22mm
length = 19 nos. +
Add 5% wastage = 0.95 No.
Nos x 1.22 = 24.339 metre
0225 Fibre reinforced by organic fibres and/or inorganic synthetic metre 24.3390
fibres cement corrugated serrated adjustable ridge.
9977 Carriage (The ridge is to be fixed with the same hooks as the L.S. 13.5200
Sheets)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.12.2 Plain wing adjustable ridges

Details of cost for length of ridge 20.20 metres Plain wing
adjustable ridges

MATERIAL
Ridge piece required each of 1.22m length = 19 nos. +
19.95 nos x 1.22 = 24.339 metre
fibres cement plain wing adjustable ridge.
Sheets)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.12.3 Close fitting adjustable ridges

Details of cost for length of ridge 20.2 metres Close fitting
adjustable ridges

No. of ridge pairs required, of length
1.22m each = 22.00 nos. +
Add 5% wastage = 1.10 Nos.
= 23.10 nos.x 1.22= 28.182 metre
fibres cement close fitting adjustable ridge.
9977 Carriage L.S. 16.1200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.12.4 Unserrated adjustable hips

Details of cost for a shed with hip as 20.2 metres Unserrated
adjustable hips
Consider a shed with hip as 20.2 metres
No. of hi pieces required = 19 pairs
Length of each pair 1.22 metres
Add 5 % wastage = 0.95 pairs
= 19.95 pairs x 1.22 = 24.339 metre
fibres cement unserrated adjustable ridge for hips.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.13 Providing and fixing fibre cement reinforced by organic fibres

and/or inorganic synthetic fibres roofing accessories in all
colours with polymer coated J or L hooks, bolts and nuts and
or G.I. seam bolts and nuts, G.I. plain and bitumen washers or
with self drilling fastener and EPDM washer etc. complete:
12.13.1
Corrugated apron pieces
Details for shed of 20.2 metres completed length
MATERIAL
Corrugated apron pieces of 1.12 metre length = 20 nos.+

Total = 21 nos.x 1.12=23.52 metre
fibres cement corrugated apron piece.
9977 Carriage of apron pieces. L.S. 3.2500
(The apron pieces are to be fixed with the same hooks as the
sheets)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.13.2 Eave's filler pieces

Details of eaves filler for a shed of 20.2 metres complete
length
MATERIAL
Eaves filler pieces of 0.16 metres length = 20 nos.+
Total = 21 nos.
0229 Fibre reinforced by organic fibres and/or inorganic synthetic each 21.0000
fibres cement eaves filler piece.
9999 The eaves filler pieces are to be fixed with the same hooks as L.S. 3.2500
the sheets
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.13.3 North light curves

Details of North light curve 20.2 metres long complete length
MATERIAL
North light curves of 1.016 metres nominal length = 20 nos. +

= 21 nos.x 1.016 = 21.336 metre
fibres cement north light curves.
9977 Carriage of hooks, nuts, washers and curves L.S. 9.8800
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.13.4 Ventilator curves

Details of ventilator curve 20.2 metres long complete length
MATERIAL
Ventilator curves of 1.016 metres nominal length = 20 nos. +

Total = 21 nos.x 1.016 = 21.336 metre
fibres cement ventilator curves.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.13.5 Barge boards

Details of cost for 9.70 metres
Completed length of barge boards
MATERIAL
Barge boards 2.50metres = 4 nos. x 2.50 = 10.00 metre
Add 5% wastage = 0.50 metre.
Total = 10.50 metre.
fibres cement barge boards 6 mm thick.
9977 Carriage of barge boards, bolts, nuts and washers L.S. 9.3600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 9.70 metre
Cost of 1.00 metre
Say
12.13.6 Ridge finials

Details of a pair of ridge final
MATERIAL
Ride final = pair
Add 5% wastage = 0.05pair.
Total = 1.05 pair
0233 Fibre reinforced by organic fibres and/or inorganic synthetic pair 1.0500
fibres cement ridge finial .
9988 Carriage, sundries, fixing charges including providing and L.S. 10.7900
fixing, seam bolts and nuts, with G.I. and bitumen washers
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 pair
Say
12.13.7 Special north light curves

Details of special north light ventilator curve 20.2 metres long
complete length
MATERIAL
Special north light curves of 1.016 metres nominal length = 20
nos. +
Total = 21 nos.
fibres cement special north light curves.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20 nos
Cost of 1.00 no
Say
12.13.8 S type louvers

MATERIAL
S type louvers = 5 nos.+
Add 5% wastage = 0.25 nos.
Total = 5.25 nos.
fibres cement S type louvers.
9977 Carriage L.S. 10.7900
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both each 6.0000
sides threaded with4 galvanised steel nuts
1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts each 6.0000

9977 Carriage of bolts and nuts and washers L.S. 2.7300
9999 Sundries L.S. 13.3900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 8.74 metres
Cost of 1.00 metre
Say
12.14 Providing flat iron brackets 50x3 mm size with necessary

bolts, nuts and washers etc. for fixing G.S. sheets gutters with
purlins.

Detail of cost for 20 metres
MATERIAL
Flat 50x3mm size
1025 Mild steel bolts 6 mm dia and 25 mm long with hexagonal 10 Nos 3.8000
head
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.15 Painting top of roofs with bitumen of approved quality @
17kg per 10 sqm impregnated with a coat of coarse sand at 60
cudm per 10 sqm, including cleaning the slab surface with
brushes and finally with a piece of cloth lightly soaked in
kerosene oil complete :
12.15.1 With residual type petroleum bitumen of grade VG -10

Details of cost for 10 Sqm.
MATERIAL
Bitumen 80/100
LABOUR
(for cleaning the surface, applying kerosene oil, heating
materials and carrying the hot tar over the roof
9999 Sundries (Brushes and T and P) L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.16 10 cm thick (average) mud phaska of damped brick earth on

roofs laid to slope consolidated and plastered with 25 mm
thick mud mortar mixed with bhusa @ 35 kg per cum of earth
and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and
covered with flat tile bricks, grouted with cement mortar 1:3
(1 cement : 3 fine sand) mixed with 2% of integral water
proofing compound by weight of cement and finished neat:
12.16.1 With common burnt clay F.P.S.(non modular) brick tile of class
designation 10
Details of cost for (mud phaska) 10.00sqm.
MATERIAL
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209 = 1.257 cum.
0811 Mud (dry) cum 1.2570
Mud mortar for 25 mm thick plaster over phuska
Bhusa 0.263x35 = 9.20 +
5% wastage = 0.46
Total = 9.66 Kg. say 10 kg = 0.1 q
0308 Bhusa quintal 0.1000
9999 Cowdung L.S. 5.3300
9999 Mud mortar for gobri leaping L.S. 8.0600
9977 Carriage of bhusa and cowdung L.S. 2.7300
Tile bricks 22.9x11.4x4.4cm of designation 100
designation 10
Cement mortar for grouting 1:3 (1 cement : 3 fine sand)
Integral water proofing compound 2% by weight of cement

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.17 10cm thick (average) mud phaska of damped brick earth on

roofs laid to slope consolidated and plastered with 25 mm
thick mud mortar with bhusha @ 35 kg per cum of earth and
gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered
with machine moulded tile bricks, grouted with cement
mortar 1:3 ( 1 cement : 3 fine
12.17.1 sand) mixed with 2% of integral water proofing compound by

weight of cement and finished neat.
Details of cost for (mud) 10.00sqm.
MATERIAL
Mud Phuska = 1.048 cum.
Wastage 20% = 0.209
Total = 1.257 cum.
0811 Mud (dry) cum 1.2570
Mud mortar for 25 mm thick plaster over phuska
Bhusa 0.263x35 = 9.20
5% wastage = 0.46
Total = 9.66 Kg. say 10 kg = 0.1 q
9999 Cowdung L.S. 5.3300
9999 Mud mortar for gobri leaping L.S. 8.0600
9977 Carriage of bhusa and cowdung L.S. 2.7300
7904 Machine moulded common burnt clay tile bricks of class 1000 Nos 0.3800
designation 12.5

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.18 Extra for every additional 1 cm thickness of mud phaska.

MATERIAL
For 10 cm thickness
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257 cum.
Quantity for 1 cm thickness 1.257/10 = 0.1257 cum say 0.13
cum
0811 Mud (dry) cum 0.1300
9999 Labour for leaping and caring to roof L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.19 Providing and laying brick tiles over mumty roofs, grouted
with cement mortar 1:3 (1 cement : 3 fine sand) mixed with
2% of integral water proofing compound by weight of cement,
over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine
sand) and finished neat:
12.19.1 Common burnt clay F.P.S. (non modular) bricks tile class
Description
MATERIAL
designation 10

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.2 Providing and laying pressed clay tiles (as per approved
pattern 20 mm nominal thickness of approved size) on roofs
jointed with cement mortar 1:4 (1 cement : 4 coarse sand)
mixed with 2% integral water proofing compound, laid over a
bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse
sand) and finished neat complete.

MATERIAL
7266 Pressed clay tiles 20 mm thick 250 x 250 mm size 1000 Nos 0.1600

LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 stone aggregate 10 mm and down
gauge), including finishing with cement mortar 1:3 (1 cement :
3 fine sand) as per standard design :
12.21.1 In 75x75 mm deep chase

Details of cost for 10 metres cement concrete
0367 Portland Cement (OPC-43 grade) tonne 0.0300
0128 Mate day 0.0037
9999 Hire and running charge of mechanical mixer L.S. 2.4700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
12.22 Making khurras 45x45 cm with average minimum thickness of
5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over P.V.C.
sheet 1 m x1 m x 400 micron, finished with 12 mm cement
plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement, rounding the edges and making and finishing the
outlet complete.

0128 Mate day 0.0004
9999 Hire and running charge of mechanical mixer L.S. 0.2600
3002 Polyvinyl chloride sheet 400 micron thick sqm 1.0000
9999 Rounding of edges and making outlet L.S. 0.2600
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
12.23 Providing sand stone slab for roofing and laying them in
cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden
karries or R.C.C. battens or structural steel sections (Karries or
battens or structural steel sections to be paid separately),
including pointing the ceiling joints with cement mortar 1:3 (1
cement : 3 fine sand ) complete :
12.23.1 Red sand stone slab

12.23.1.1 40 to 50 mm thick
MATERIAL
1174 Red sand stone slab 45 mm and 50 mm thick (un-dressed) sqm 11.0000
including wastage @ 10% = 11 sqm

slab
LABOUR
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.23.2 White sand stone slab

40 to 50 mm thick
12.23.2.1
MATERIAL
1175 White sand stone slab 45 mm and 50 mm thick (un-dressed) sqm 11.0000
including wastage @ 10% = 11sqm

slab
LABOUR
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.24 Providing and fixing insulating board ceiling of approved

quality with necessary nails etc. complete (frame work to be
paid separately) :
12.24.1 Natural colour insulating board

12.24.1.1 12 mm thick
MATERIAL
0332 Natural colour insulating board:12 mm thick sqm 11.0000
including 10% wastage = 11.00 sqm
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.24.2 White face insulating board

12.24.2.1 12 mm thick
MATERIAL
0328 White face insulating board:12 mm thick sqm 11.0000
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.24.3 Flame retardant face insulating board

12.24.3.1
12 mm thick
MATERIAL
0336 Flame retardant face insulating board: 12 mm thick sqm 11.0000
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.25 Providing and fixing flat pressed 3 layer medium density

particle board or graded particle board (Grade I) IS: 3087
marked, in ceiling with necessary nails etc. complete (frame
work to be paid separately):
12.25.1 12mm thick

MATERIAL
0341 Flat pressed 3 layer particle board (medium density) Grade I , sqm 11.0000
12 mm thick
9977 Carriage L.S. 14.9500
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.26 Providing and fixing plain multipurpose cement board(Hight

pressure steam cured) with suitable screws for cement
particle board in ceiling etc. complete (frame work to be paid
separately).
12.26.1 6 mm thick Cement fibre board as per IS: 14862

MATERIAL
0236 Fibre reinforced by organic fibres and/or inorganic synthetic sqm 11.0000
fibres cement board 6mm thick.
9977 Carriage L.S. 14.9500
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.26.2 6 mm thick Cement bonded wood particle board as per

IS:14276
MATERIAL
0242 6 mm thick multi purpose cement bonded wood particle sqm 11.0000
board
9977 Carriage L.S. 14.9500
9999 Nails L.S. 26.9100
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.27 Extra for Circular cutting including wastages in ceiling with:
12.27.1 2nd class teak wood planks 20 mm thick

Details of cost for 10 holes of 0.5m dia each
MATERIAL
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
Total = 2.15 sqm
2.15 sqm x 20 mm = 0.043 cum
1190 Second class teak wood in planks 10 cu dm 4.3000
LABOUR
9999 Scaffolding L.S 7.8000
9999 Sundries L.S. 14.6900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.2 Natural colour insulating board

12.27.2.1 12 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm
0332 Natural colour insulating board:12 mm thick sqm 2.1500
9999 Nails L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.3 White face insulating board:

12.27.3.1 12 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm
0328 White face insulating board:12 mm thick sqm 2.1500
9999 Nails L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.4 Flame retardant face insulating board:

12.27.4.1 12 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm
0336 Flame retardant face insulating board: 12mm thick sqm 2.1500
9999 Nails L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.5 Standard quality hard board sheet:

12.27.5.1 3 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm
0994 Standard quality hard board sheet: 3 mm thick sqm 2.1500
9999 Nails L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.5.2 4.5 mm thick

MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm
0996 Standard quality hard board sheet: 3 mm thick sqm 2.1500
9999 Nails L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.28 Extra for providing and fixing ceiling to curved surfaces in

narrow widths
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.31 providing 10 mm thick plaster of Paris (gypsum anhydrous)

ceiling up to a height of 5 m above floor level, over first class
kail wood strips 25x6 mm with 10 mm gap in between and
reinforced with rabbit wire mesh fixed to wooden frame
(frame work to be paid separately):
12.31.1 Flat surfaces

Details of cost for 4.00x2.5=10sqm.
MATERIAL
Wooden strips of 1st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
Total = 47.52 cudm
1196 First class kail wood in planks 10 cu dm 4.7520
1219 Wire nails kilogram 0.7500
required for fixing the laths to frame work including breakage
and wastage of nails
Rabbit wire mesh required for reinforcement =
2.5x4 = 10.00sqm.+
add 2% wastage = 0.20 sqm.
Total = 10.2 sqm.
1220 Wire mesh (rabbit) sqn 10.2000
Plaster of paris - 2.5x4.0x10x1121/1000 = 112.10 kg.
Add for plaster of paris joining into the side of the laths-
2.5x4.0x4.0032x1121/1000 = 44.87 kg.
2.5x4.0x4.0032x1121/1000 = 44.87 kg.
Total = 156.97+
Total = 219.76 kg
0869 Plaster of Paris Kilogram 219.7600
2308 Carriage of Plaster of paris tonne 0.2200
9977 Carriage of wire mesh and nails etc L.S. 2.7300
LABOUR
For doing plaster of paris over wooden strips
0122 Mason (for plaster of paris work) 1st class day 3.2300
Bhisti day 0.5400
Scaffolding L.S. 83.9800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.31.2 Curved surfaces

Details of cost for 4.00x2.5=10sqm.
MATERIAL
Wooden strips of 1st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
Total = 47.52 cudm
1196 First class kail wood in planks 10 cu dm 4.7520
1219 Wire nails kilogram 0.7500
required for fixing the laths to frame work including breakage
and wastage of nails
Rabbit wire mesh required for reinforcement =
2.5x4 = 10.00sqm.+
add 2% wastage = 0.20 sqm.
Total = 10.2 sqm.
1220 Wire mesh (rabbit) sqn 10.2000
Plaster of paris - 2.5x4.0x10x1121/1000 = 112.10 kg.
Add for plaster of paris joining into the side of the laths-
2.5x4.0x4.0032x1121/1000 = 44.87 kg.
2.5x4.0x4.0032x1121/1000 = 44.87 kg.
Total = 156.97+
Total = 219.76 kg
9977 Carriage of wire mesh and nails etc L.S. 2.7300
LABOUR
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.32 Extra for sunk or raised mouldings in the plaster of Paris

(Gypsum anhydrous) ceiling.
MATERIALS
LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling

above 5 metres height from floor level.

Details of cost for 10sqm/metre height
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm/metre height
Cost of 1.00 sqm/metre height
Say
12.34 Providing fixing thermal insulation of ceiling (under deck

insulation) with Resin Bonded Fibre glass wool conforming to
IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G
Virgin Polythene bags, fixed to ceiling with metallic cleats
(50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge
wire mesh, for top most ceiling of building.

Area for 10.00sqm. (Finished surface) = 10.00sqm
Add 10% for overlappings & wastage = 1.00sqm.
Total = 11.00sqm.
7232 Resin Bonded Glass wool 24 kg/m³ 50 mm thick sqm 11.0000
9999 Sundries including GI wire 20 SWG and Virgin polythene bags L.S, 104.0000
200 gram
9999 GI chicken mesh 12.5mm x 24 SWG L.S, 351.0000
LABOUR
Carpenter 1st class day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.35 Providing and fixing thermal insulation with Resin Bonded

Fibre glass wool conforming to IS: 8183. Density 16 kg/m³, 50
mm thick, wrapped in 200G Virgin Polythene bags placed over
existing false ceiling and held in position by criss-crossing GI
wire

Area for 10.00sqm. (Finished surface) = 10.00sqm.+
Add 10% for overlappings & wastage = 1.00sqm.
Total = 11.00sqm.
9999 Sundries including GI wire 20 SWG and Virgin polythene bags L.S, 52.0000
200 gram
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
12.36 Thermal Insulation of roofing with Expanded polystyrene fixed
with suitable adhesive to the false ceiling as per the directions
of the Engineer-in-charge:
12.36.1 With Type N - Normal 50 mm thick

Cost of materials :
Expanded Polystyrenes 1x10=10.00sqm. +
Total = 11.00sqm.
7090 Expanded polystyrene type N- Normal sqm 11.0000
9999 Sundries L.S. 13.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.36.2 With Type SE - Self Extinguishing type 50 mm thick

Cost of materials :
Expanded Polystyrenes 1x10=10.00sqm. +
Total = 11.00sqm.
7091 Expanded polystyrene type - SE sqm 11.0000
9999 Sundries L.S. 13.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
12.37 Providing and fixing 100 mm diameter and 60 cm long rain

water spout in cement mortar 1:4 (1 cement : 4 fine sand).
12.37.1 Stone ware spout

Details of cost for 10 stone ware spout of 60cm long
MATERIAL
3004 Stone ware spouts 100 mm dia 60 cm long each 10.0000
9977 CARRIAGE L.S. 13.5200
9999 Mortar L.S. 13.5200
Labour for fixing and placing in position
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 spouts
Cost of 1.00 spout
Say
12.38 Providing and fixing M.S. holder bat clamps of approved

design to C.I. or S.C.I. rain water pipes embedded in and
including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1
nominal size) and cost of cutting holes and making good the
walls etc. :
12.38.1 100 mm diameter

MATERIAL
1331 M.S.Holder bat clamp of approved design for 100 mm S.C.I. each 5.0000
pipe
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
9977 Carriage of bat clamps L.S. 2.4700
LABOUR
0128 Mate day 0.0002
9999 Hire charges of machine etc. L.S. 0.2600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.00 bat clamps
Cost of 1.00 bat clamp
Say

MATERIAL
0886 Standard holder bat clamps for sand cast iron or cast iron each 5.0000
pipes 150 mm dia
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
LABOUR
0128 Mate day 0.0002
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 bat clamp
Say
12.39 Providing lead caulked joints to sand cast iron rain water pipes
and fittings:
12.39.1 100 mm dia Pipe
Details of cost for one joint.
MATERIAL
0865 Pig lead kilogram 0.9800
1001 Spun yarn kilogram 0.1100
9999 Kerosene oil fuel and sundries L.S. 13.5200
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 0.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 joint
Say
12.39.2 150 mm dia Pipe

Details of cost for one joint.
MATERIAL
9999 Kerosene oil fuel and sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 joint
Say
12.4 Providing, fixing and embedding sand cast iron accessories for
rain water pipes in the masonry surrounded with 12 mm thick
cement mortar of the same mix, as that of masonry (lead
caulking will be paid for separately):
12.40.1 Sand cast iron plain shoes :

12.40.1.1 150 mm diameter
Details of cost for one shoe
0966 Sand Cast iron plain shoe 150 mm dia each 1.0000
9988 Carriage, fixing and mortar L.S. 17.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one shoe
Say
12.41 Providing and fixing on wall face unplasticized Rigid PVC rain
water pipes conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382, leaving 10 mm
gap for thermal expansion, (i) Single
socketed pipes.
7188 U-PVC pipes (working pressure 4 kg / sqcm.) Single socketed metre 6.0000
pipe 75 mm dia.
7190 U-PVC pipes (working pressure 4 kg /sqcm.) Rubber (Seal) Ring each 1.0000
75 mm dia.
9999 Adhesive, and sundries etc. L.S. 6.7600
LABOUR
9999 Scaffolding etc. L.S. 18.5900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.00 metre
Cost of 1.00 metre
Say

7189 U-PVC pipes (working pressure 4 kg / sqcm) Single socketed metre 6.0000
pipe 110 mm dia.
7191 U-PVC pipes (working pressure 4 kg / sqcm.) Rubber (Seal) each 1.0000
Ring 110 mm dia.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6.00 metre
Cost of 1.00 metre
Say
12.42 Providing and fixing on wall face unplasticized - PVC moulded

fittings/ accessories for unplasticized Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with
seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
12.42.1 Coupler
12.42.1.1 75 mm
Details of cost for 1 coupler
7192 UPVC coupler for UPVC drainage pipes 75 mm each 1.0000
75 mm dia.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 coupler
Say
12.42.1.2 110 mm
7193 UPVC coupler for UPVC drainage pipes 110 mm each 1.0000
7191 U-PVC pipes (working pressure 4 kg /sqcm) Rubber (Seal) Ring each 2.0000
110 mm dia.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 coupler
Say
12.42.2 Single push fit Coupler

12.42.2.1
75 mm
7194 UPVC push fit coupler (single) 75 mm thick each 1.0000
75 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 coupler
Say
12.42.2.2 110 mm
7195 UPVC push fit coupler (single) 110 mm thick each 1.0000
7191 U-PVC pipes (working pressure 4 kg /sq.cm) Rubber (Seal) Ring each 2.0000
110 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 coupler
Say
12.42.3 Single tee with door

Code 12.42.3.1 75x75x75 mm Unit Quantity
Details of cost for 1 tee
MATERIAL
7198 UPVC single equal Tee (with door) 75x75x75 mm each 1.0000
75 mm dia.
9988 Adhesive, Carriage of material rubber washer etc. including L.S. 10.7600
fixing charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 tee
Say
12.42.3.2 110x110x110 mm
MATERIAL
7199 UPVC single equal Tee (with door) 110x110x110 mm each 1.0000
7191 U-PVC pipes (working pressure 4 kg / sqcm) Rubber (Seal) Ring each 3.0000
110 mm dia.
fixing charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 tee
Say
12.42.4 Single tee without door

12.42.4.1 75x75x75 mm
MATERIAL
7196 UPVC single equal Tee (without door) 75x75x75 mm each 1.0000
75 mm dia.
fixing charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 tee
Say
12.42.4.2 110x110x110 mm
MATERIAL
7197 UPVC single equal Tee (without door) 110x110x110 mm each 1.0000
110 mm dia.
fixing charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 tee
Say
12.42.5 Bend 87.5°

12.42.5.1 75 mm bend
Details of cost for 1 bend
7208 UPVC bend 87.5° 75 mm bend each 1.0000
75 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 bend
Say
12.42.5.2 110 mm bend

Details of cost for 1 bend
7209 UPVC bend 87.5° 110 mm bend each 1.0000
110 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 bend
Say
12.42.6 Shoe (Plain)

12.42.6.1 75 mm Shoe
Details of cost for 1 shoe
7212 UPVC plain shoe 75 mm each 1.0000
75 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 shoe
Say
12.42.6.2 110 mm Shoe

Details of cost for 1 shoe
7213 UPVC plain shoe 110 mm each 1.0000
110 mm dia.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 shoe
Say
12.43 Providing and fixing unplasticized -PVC pipe clips of approved

design to unplasticized - PVC rain water pipes by means of
50x50x50 mm hard wood plugs, screwed with M.S. screws of
required length, including cutting brick work and fixing in
cement mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete.
12.43.1 75 mm
MATERIAL
7214 UPVC pipe clip 75 mm each 5.0000
9977 Carriage of U-PVC pipe clips L.S. 2.4700
0870 Plug each 10.0000
LABOUR
9999 Sundries cement mortar 1:4 (1Cement :
4 Coarse sand) L.S. 3.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 Nos.
Cost of 1 No.
Say
12.43.2 110 mm
MATERIAL
7215 UPVC pipe clip 110 mm each 5.0000
9977 Carriage of U-PVC pipe clips L.S. 2.4700
0870 Plug each 10.0000
LABOUR
9999 Sundries cement mortar 1:4 (1Cement :
4 Coarse sand) L.S. 3.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5 Nos.
Cost of 1 No.
Say
12.44 Providing and fixing to the inlet mouth of rain water pipe cast
iron grating 15 cm diameter and weighing not less than 440
grams.

Details of cost for 1 grating
MATERIAL
7187 C.I. grating 150 mm dia. (Weighing not less than 440 gm) each 1.0000
9977 Carriage of material and fixing charges L.S. 4.1600

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each grating
Say
12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,
power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS : 277
and
consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to
centre, one flange fixed to the ceiling with dash fastener 12.5
mm dia x 50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size
and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm
centre to centre, to which the ceiling section 0.5 mm thick
bottom wedge of 80 mm with tapered flanges of 26 mm each
having lips of 10.5 mm, at 450 mm centre to centre, shall be
fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long
G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at
450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section
and perimeter channel with the help of dry wall screws of size
3.5 x 25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound
in 3 layers covering up to 150 mm on both sides of joint and
two coats of primer suitable for board, all as per
manufacturer's specification and also
including the cost of making openings for light fittings, grills,

diffusers, cut-outs made with frame of perimeter channels
suitably fixed, all complete as per drawings, specification and
direction of the Engineer in Charge but excluding the cost of
painting with :
12.45.1 12.5 mm thick tapered edge gypsum plain board conforming

to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
Details of cost for 10.8x9.6m = 103.68sqm.
MATERIAL
Gypsum board 12.5mm thick = 103.68 sqm.+
Total = 108.86 sqm.
7009 12.5 mm thick tapered edge gypsum plain board sqm 108.8600
7010 Galvanised Steel ceiling section (size 80x26x0.50mm) metre 238.1400
7011 Galvanised Steel perimeter Channel (Size 20x27x30x0.50mm) metre 41.8400
7012 Galvanised Steel intermediate Channel (Size metre 90.7200

15x45x15x0.90mm)
Strap hanger
7013 Galvanised Steel angle hanger (Celling angle) (Size metre 10.8000
25x10x0.50mm)
7014 Galvanised Steel connecting clips (2.64mm dia and 230 mm each 189.0000
long GI wire)
head with slots
7015 Galvanised Steel soffit cleat (Size 27x37x25x0.60mm) each 72.0000
7016 Joint filler kilogram 22.8100
7017 Joint finisher kilogram 34.2100
bolt
9999 Sundries like rawl plug scaffolding etc L.S. 807.3000
9977 Carriage of material etc. L.S. 447.2000
LABOUR :-
0114 Beldar day 31.1040
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 103.68 sqm
Cost of 1.00 sqm
Say
12.45.2 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG)

board conforming to IS: 2095- (Part 3):1996 (Boards with BIS
certification marks)
MATERIAL
Total = 108.86 sqm.
7009 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) sqm 108.8600
board

15x45x15x0.90mm)
Strap hanger
25x10x0.50mm)
long GI wire)
head with slots
bolt
LABOUR :-
0114 Beldar day 31.1040
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 103.68 sqm
Cost of 1.00 sqm
Say
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board

MATERIAL
Total = 108.86 sqm.
7031 12.5 mm thick tapered edge gypsum moisture resistant board sqm 108.8600


15x45x15x0.90mm)
Strap hanger
25x10x0.50mm)
long GI wire)
head with slots
bolt
LABOUR :-
0114 Beldar day 31.1040
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 103.68 sqm
Cost of 1.00 sqm
Say
12.45.4 Fully Perforated Gypsum Plaster Board of size 1200 x
2400x12.5 mm having approx. 15 % perforated area with
perforation size and pattern as approved by the Engineer-in-
charge and as per manufacturer's specification, with all 4 side
tapered and backed by acoustical tissue with NRC value not
less than 0.60

MATERIAL
Total = 108.86 sqm.
7028 12.5 mm thick Fully Perforated gypsum board sqm 108.8600

15x45x15x0.90mm)
Strap hanger
25x10x0.50mm)
long GI wire)
head with slots
bolt
LABOUR :-
0114 Beldar day 31.1040
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 103.68 sqm
Cost of 1.00 sqm
Say
12.46 Providing and fixing to the inlet mouth of rain water pipe
PTMT (an Engineering Thermoplastic) grating square (Slit) 150
mm square with a height of 8 mm and weighing not less than
100 gms.

Details of cost for 1 grating
MATERIAL
7857 P.T.M.T. Grating square slit 150mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each grating
Say
12.47 Providing & fixing UV stabilised fiberglass reinforced plastic

sheet roofing up to any pitch, including fixing with polymer
coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding the cost of
purlins, rafters, trusses etc. The sheets shall be manufactured
out of 2400 TEX panel rovigs incorporating minimum 0.3%
ultra-violet stabiliser in resin system under approximately
2400 psi and hot cured. They shall be of uniform pigmentation
and thickness without air pockets and shall conform to IS
10192 and IS 12866.The sheets shall be opaque or
translucent, clear or pigmented, textured or smooth as
specified.
12.47.1 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or

3" or 6" ) as specified
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
MATERIAL
8668 UV stabilised 2 mm thick corrugated FRP sheet sqm 240.4080
9977 Carriage of sheet L.S. 104.0000
G.I.Seam bolts and nuts 60cm centre to centre zig-zag
i.e. 30cm centre to centre straight Breadth is 5.1metre
No. of bolts in one lap 5.1/0.3 =17 nos
. 2x26(laps)x17 nos. = 884 nos.
head with slots

(total of seam and J bolts) 884+810= 1694
9999 Sundries L.S. 53.8200
LABOUR
0114 Beldar day 15.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Sqm.
Say
12.47.2 2 mm thick flat

Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
MATERIAL
8667 UV stabilised 2 mm thick plain FRP sheet sqm 240.4080
9977 Carriage of sheet L.S. 104.0000
G.I.Seam bolts and nuts 60cm centre to centre zig-zag
i.e. 30cm centre to centre straight Breadth is 5.1metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)x17 nos. = 884nos.
head with slots
(No. of purlins to be used 5 on either side)2x5x27

884+810= 1694
9999 Sundries L.S. 53.8200
LABOUR
0114 Beldar day 15.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Sqm.
Say
12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of
20 mm nominal thickness and of approved size and as per
approved pattern on steel frame work complete (steel frame
work to be paid separately).

MATERIAL
8670 Mangalore tiles 20 mm thick each 160.0000
LABOUR
9999 Sundries L.S. 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.49 Providing & laying on roof pressed clay tile ridge (Mangalore
tile) of 20mm thickness and of approved pattern on steel
frame work complete (steel frame work to be paid
separately).

Details of cost for 3.60 metre
MATERIAL
8669 Mangalore ridge tiles 20 mm thick each 12.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.60 metre
Cost for 1 metre
Say
12.5 Providing and fixing precoated galvanised iron profile sheets

(size, shape and pitch of corrugation as approved by Engineer-
in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc
coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in
single length up to 12 metre or as desired by Engineer-in-
charge. The sheet shall be fixed using self drilling /self tapping
screws of size (5.5x 55 mm) with EPDM seal, complete up to
any pitch in horizontal/ vertical or curved surfaces, excluding
the cost of purlins, rafters and
trusses and including cutting to size and shape wherever
required.

Details of cost of 216.14 sqm.
plinth).
Area of roof-
20.2x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 20 nos.x10.70mx1.06m = 226.84sqm
Total = 233.65sqm.
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm 233.6500
9977 Carriage of sheets L.S. 104.0000
9999 Sundries L.S. 39.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
12.51 Providing and fixing precoated galvanised steel sheet roofing

accessories 0.50 mm (+0.05 %) total coated thickness, Zinc
coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns using self drilling/ self
tapping screws complete :
12.51.1 Ridges plain (500 - 600mm)

Detail of cost for 20.20 metre
One piece plain ridges
Length of ridges 20.2 metre + 5% wastage = 23.11 metre.
MATERIAL
8672 Precoated galvanised steel plain ridges 0.50 mm TCT and 500 - metre 23.1100
600 mm wide
Sheets)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.51.2 Flashings/ Aprons.( Up to 600 mm)

MATERIAL
8673 Precoated galvanised steel flashings/aprons 0.50mm TCT and metre 23.1100
wide up to 600 mm
20.20 + 5% wastage = 23.11 metre
9977 Carriage of apron pieces. (The apron pieces are to be fixed L.S. 3.2500
with the same hooks as the sheets)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.51.3 North light curves

Details of North light curve 20.20 metres long complete
length
MATERIAL
8675 Precoated galvanised steel north light curves metre 23.1100
20.20 + 5% wastage = 23.11 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.51.4 Barge board (Up to 300 mm)

Completed length of barge boards = 8.23 + 5% wastage = 8.64
metre
MATERIAL
8676 Precoated galvanised steel barge board metre 8.6400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 8.23 metre
Cost of 1.00 metre
Say
12.51.5 Crimp curve

Details of crimp curve 20.2 metres long
complete length, Area 20.20 x 1.06 =21.412 sqm
MATERIAL
8677 Precoated galvanised steel crimp curve sqm 22.4830
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 21.412 sqm
Cost of 1.00 sqm
Say
12.51.6 Gutter (600 mm over all girth)

Detail of cost of 10 metre
0.63mm thick with zinc coating not less than 275gm/sqm

Sheet used = 10x1.06m x 0.60 = 6.36 sqm.
Total = 6.36 metre
8674 Precoated galvanised steel gutter metre 10.0000
9977 Carriage of gutter L.S. 1.0400
head with slots
LABOUR
9999 Sundries L.S. 12.6100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
12.52 Providing and fixing tiled false ceiling of specified materials of

size 595x595 mm in true horizontal level, suspended on inter
locking metal grid of hot dipped galvanized steel sections
( galvanized @ 120 grams/ sqm, both side inclusive) consisting
of main "T" runner with suitably spaced joints to get required
length and of size 24x38 mm made from 0.30 mm thick
(minimum) sheet, spaced at 1200 mm center to center and
cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)
sheet,
1200 mm long spaced between main "T" at 600 mm center to

center to form a grid of 1200x600 mm and secondary cross
"T" of length 600 mm and size 24x25 mm made of 0.30 mm
thick (minimum) sheet to be interlocked at middle of the
1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of
approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc.
Main "T" runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with
12.5 mm dia and 50 mm long dash fasteners, 4 mm GI
adjustable rods with galvanised butterfly level clips of size 85 x
30 x 0.8 mm spaced at 1200 mm center to center along main
T, bottom exposed width of 24 mm of all T-sections shall be
pre-painted with polyester paint, all complete for all heights
as per specifications, drawings and as directed by Engineer-in-
charge.
12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white colour
tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop;
made of G I sheet having galvanizing of 100 gms/sqm (both
sides inclusive) and electro statically polyester powder coated
of thickness 60 microns (minimum), including factory painted
after bending.

MATERIAL
Celling Area =100 sqm
Total=105.00 sqm
8599 GI Metal Tile Lay-in Plain Tegular edge global white colour sqm 105.0000
tiles of Size 595x595mm and 0.5 mm thick
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 29.5000
Including Wastage @ 10%
8612 Perimeter wall angle 24x24x0.3mm (3 metre long) each 13.5000
8613 Intermediate cross T-section 24x25x 0.3mm (1.2 mtrs long) each 147.0000
Including Wastage @ 10% on Grid for cut outs

8614 Intermediate cross T-section 24x25x0.3mm (0.6 mtrs long) each 147.0000

8615 Hanger rod 4 mm thick each 72.0000
8616 Adjustment clip 85x30x0.8mm each 72.0000
8617 Soffit cleat (Size 27x37x25x1.60mm) each 72.0000
bolt
9999 Sundries i.e. scaffolding etc. Carriage of materials etc. L.S. 187.9500
9977 Carriage of materials etc L.S. 89.2800
LABOUR
Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100.00 sqm
Cost of 1.00 sqm
Say
12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white

colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm
drop; made of GI sheet having galvanizing of 100 gms/sqm
(both sides inclusive) and 20% perforation area with 1.8 mm
dia holes and having NRC (Noise Reduction Coefficient ) of 0.5,
electro statically polyester powder coated of thickness 60
microns (minimum), including factory painted after bending
and perforation, and backed with a black Glass fibre acoustical
fleece.

MATERIAL
Total=105.00 sqm
8600 GI Metal Tile Lay-in Perforated Tegular edge global white sqm 105.0000
colour tiles of Size 595x595mm and 0.5 mm thick


bolt
LABOUR
Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100.00 sqm
Cost of 1.00 sqm
Say
12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of

size 595x595 mm, made of Gypsum plasterboard,
manufactured from natural gypsum as per IS 2095 part I and
laminated with white 0.16mm thick fire retardant PVC film on
the face side and 12micron metalized polyester on the back
side with all edges sealed with the face side PVC film which
goes around and wraps the edges and is bonded to the edges
and the back side metalized polyester film so as to make the
tile a completely sealed unit.

MATERIAL
Total=105.00 sqm
8601 VC Laminated Gypsum Tiles (Square edge) of Size 595x595 sqm 105.0000
mm and 12.5 mm thick


bolt
LABOUR
Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100.00 sqm
Cost of 1.00 sqm
Say
12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from
plasterboard having glass fibre conforming to IS: 2095 part I,
of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4
mm c/c with center borders of 48 mm and the side borders of
30 mm, backed with non woven tissue on the back side,
having an NRC
(Noise Reduction Coefficient) of 0.79, with 50 mm resin
bonded glass wool backing.

MATERIAL
Total=105.00 sqm
8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 sqm 105.0000
mm and 12.5 mm thick


bolt
LABOUR
Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100.00 sqm
Cost of 1.00 sqm
Say
12.53 Providing and Fixing 15 mm thick densified tegular edged eco

friendly light weight calcium silicate false ceiling tiles of
approved texture of size 595 x 595 mm in true horizontal
level, suspended on inter locking metal grid of hot dipped
galvanised steel sections (galvanising @ 120 grams per sqm
including both side) consisting of main ‘T’ runner suitably
spaced at joints to get required length and of size 24x38 mm
made from 0.33 mm thick (minimum) sheet, spaced 1200 mm
centre to centre,
and cross “T” of size 24x28 mm made out of 0.33 mm

(Minimum) sheet, 1200 mm long spaced between main’T’ at
600 mm centre to centre to form a grid of 1200x600 mm and
secondary cross ‘T’ of length 600 mm and size 24 x28 mm
made of 0.33 mm thick (Minimum) sheet to be inter locked at
middle of the 1200x 600 mm panel to from grid of size
600x600 mm, resting on periphery walls /partitions on a
Perimeter wall angle pre-coated steel of size(24x24X3000 mm
made of 0.40 mm thick (minimum) sheet with the help of rawl
plugs at 450 mm centre to centre with 25 mm long dry wall
screws @ 230 mm interval and laying 15 mm thick densified

edges calcium silicate ceiling tiles of approved texture in the
grid, including, cutting/ making opening for services like
diffusers, grills, light fittings, fixtures, smoke detectors etc.,
wherever required. Main ‘T’ runners to be suspended from
ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to
ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4 mm G.I. adjustable rods with galvanised steel

level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre
to centre along main ‘T’, bottom exposed with 24 mm of all
Tsections shall be pre-painted with polyester baked paint, for
all heights, as per specifications, drawings and as directed by
Engineer-in-Charge.
MATERIAL
8589 Calcium Silicate tegular edged celling tiles 495x495 mm and sqm 105.0000
15 mm thick
Area = 100 sqm +
Add 5% wastage = 5 sqm
Total = 105 sqm
8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33mm each 29.5000
(3.00 metre long)
8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm each 13.5000
(3.00 metre long)
8592 Galvanised Steel intermediate cross T section Size 24 x 25 x each 147.0000
0.33 mm (1.2 metre long)
8593 Galvanised Steel intermediate cross T section Size 24 x 25 x each 147.0000
0.33. ( 0.6 metre long)
bolt
8595 Wooden screws with plastic rawl plugs 35x8 mm each 100.0000
9999 scaffolding etc. L.S. 498.6500
9977 Carriage of materials etc. L.S. 237.4800
9999 Sundries L.S. 310.7000
LABOUR
0114 Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.54 Providing and fixing Gl Clip in Metal Ceiling System of 600x600
mm module which includes providing and fixing 'C' wall angle
of size 20x30x20 mm made of 0.5 mm thick pre painted steel
along the perimeter of the room with help of nylon sleeves
and wooden screws at 300 mm center to centre, suspending
the main C carrier of size 10x38x10 mm made of G.I steel 0.7
mm thick from the soffit with help of soffit cleat 37x27x25x1.6
mm, rawl plugs of size 38x12 mm and C carrier
suspension clip and main carrier bracket at 1000 mm c/c.

Inverted triangle shaped Spring Tee having height of 24 mm
and width of 34 mm made of Gl steel 0.45 mm thick is then
fixed to the main C carrier and in direction perpendicular to it
at 600 mm centers with help of suspension brackets.
Wherever the main C carrier and spring T have to join, C
carrier and spring T connectors have to be used. All sections
to be galvanized @ 120 gms/sqm (both side inclusive), fixing
with clip in tiles into spring T with :
12.54.1 GI Metal Ceiling Clip in plain Bevelled edge global white colour
tiles of size 600x600 and 0.5 mm thick with 25 mm height,
made of G I sheet having galvanizing of 100 gms/ sqm (both
sides inclusive) and electro statically polyester powder coated
of thickness 60 microns (minimum), including factory painted
after bending
Code bending. Unit Quantity

MATERIAL
Total=105 sqm
8597 GI Metal Tile Clip in Plain Bevelled edge global white colour sqm 105.0000
tiles of size 600x600 mm and 0.5mm thick
8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 60.0000
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 27.7000

8606 Main C Carrier Size 10x38x10x0.70mm (3.00 meter long) metre 33.0000

8607 Spring T-connector each 44.0000
8608 C Carrier Connector each 44.0000
8609 C Suspension Clip each 88.0000
8610 Wire Coupling Clip each 333.0000
bolt
9999 Sundries i.e. scaffolding etc. L.S. 188.0000
LABOUR
0114 Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.54.2 GI Metal Ceiling Clip in plain Bevelled edge global white colour
tiles of size 600x600 and 0.5 mm thick with 25 mm height,
made of G I sheet having galvanizing of 100 gms/ sqm (both
sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60
microns (minimum), including factory painted after bending
and perforation.

MATERIAL
Total=105 sqm
8598 GI Metal Tile Clip in Perforated Bevelled edge global white sqm 105.0000
colour tiles of size 600x600 mm and 0.5mm thick
8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 60.0000
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 27.7000

8606 Main C Carrier Size 10x38x10x0.70mm (3.00 meter long) metre 33.0000

8607 Spring T-connector each 44.0000
8608 C Carrier Connector each 44.0000
8609 C Suspension Clip each 88.0000
8610 Wire Coupling Clip each 333.0000
bolt
9999 Sundries i.e. scaffolding etc. L.S. 188.0000
LABOUR
0114 Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x

300 mm x 20 mm) with SRI (solar refractive index) > 78, solar
reflection > 0.70 and initial emittance > 0.75 on waterproof
and sloped surface of terrace, laid on 20 mm thick cement
sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and
grouting the joints with mix of white cement & marble
powder in ratio of 1:1, including rubbing and polishing of the
surface up to 3 cuts complete, including providing skirting up
to 150 mm height along the parapet walls in the same
manner.

Area= 10 sqm+
Add wastage @ 3%=0.3 sqm
Total=10.30 sqm
MATERIAL
1204 Precast heat resistant terrace tiles (size 300x300mm) and sqm 10.3000
20mm thick
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light
shade pigment kilogram 3.0800

LABOUR
9999 Sundries including carborundum stone etc. L.S. 169.9800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.56 Providing and laying roof insulation with 40 mm thick

impervious sprayed, closed cell free Rigid Polyurethane foam
over deck insulation conforming to IS - 12432 Pt. III (density of
foam being 40-45 kg/ cum), over a coat of polyurethane
primer applied @ 6-8 sqm per litre, laying 400 G polythene
sheet over PUF spray and providing a wearing course of 40
mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4
stone aggregate 20 mm nominal size) in chequered rough
finish, in panels of 2.5 m x 2.5 m and embedding with 24 G
wire netting and sealing the joints with polymerized mastic, all
complete as per direction of
Engineer-in-Charge.

MATERIAL
7050 PU Primer sqm 1.0000
Area for PU Spray = 1 sqm+
Add for wastage @ 10%=0.10 sqm
Total=1.10 sqm
7051 40 mm (average) PU spray having 40-45 kg/m3 density sqm 1.1000
7052 GI wire netting 3/4" x 24 G sqm 1.0000
9999 Polymerized mastic for all joints L.S. 20.1300
7053 400 G polythene sheet sqm 1.0000
9999 Cement L.S. 44.6700
9999 Graded stone L.S. 13.7500
9999 Sand L.S. 21.4800
LABOUR
9999 For PU spray L.S. 80.5400
9999 For cement screed with Polythene sheet L.S. 53.6900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 sqm
Say

Fibre glass wool conforming to IS: 8183 having density 24
kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags
fixed to wall with screw, rawel plug & washers and held in
position by criss crossing GI wire etc. complete as per
directions of Engineer-in-
Charge.

MATERIAL
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add Wastage @ 10% =1.00 sqm
Total =11.00sqm
9999 Sundries including GL wire 20 SWg and Virgin polythene bags L.S. 52.0000
200 gram
LABOUR
9999 Sundries (screws and washers) L.S. 20.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.58 Providing and fixing tiled false ceiling of specified materials of

size 595x595 mm in true horizontal level, suspended on
interlocking metal grid of hot dipped galvanized steel sections
( galvanized @ 120 grams/ sqm, both side inclusive) consisting
of main "T" runner with suitably spaced joints to get required
length and of size 24x38 mm made from 0.30 mm thick
(minimum) sheet, spaced at 1200 mm center to center
and cross "T" of size 24x25 mm made of 0.30 mm thick

(minimum) sheet, 1200 mm long spaced between main "T" at
600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm
made of 0.30 mm thick (minimum) sheet to be interlocked at
middle of the 1200x600 mm panel to form grids of 600x600
mm
and wall angle of size 24x24x0.3 mm and laying false ceiling

tiles of approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc. Main "T" runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x
25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long
dash
fasteners, 4 mm GI adjustable rods with galvanized butterfly

level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center
to center along main T, bottom exposed width of 24 mm of all
T-sections shall be pre-painted with polyester paint, all
complete for all heights as per specifications, drawings and as
directed by Engineer-in-charge.
12.58.1 8 mm thick fully perforated calcium silicate board made with

Calcareous & Siliceous materials reinforced with cellulose
fibre manufactured through autoclaving process to give stable
crystalline structure with minimum compressive strength 225
kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595
mm, having perforation of dia. 10 mm with minimum
perforated area 18 % with non woven tissue on the back side,
having an NRC ( Noise Reduction Coefficient) of 0.85, with 50
mm thick rockwool of 48 kg /cum backing.

Ceiling area = 100 sq.m
Add wastage @ 5% = 0.05 Sqm
Total =100.05 Sq.m
MATERIALS :
8784 8mm thick Calcium silicate perforated tiles of size 595 sqm 100.0500
x595mm

bolt
9977 Sundries L.S. 89.2800
9999 Sundries i.e scaffolding etc. L.S. 187.9500
LABOUR :
0114 Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.59 Providing & fixing false ceiling at all height including providing
& fixing of framework made of special section, power pressed
from M.S. sheets and galvanised with zinc coating of 120 gms/
sqm (both side inclusive) as per IS : 277 and consisting of
angle cleat of size 25mm wide x 1.6mm thick with flanges of
27mm and 37mm, at 1200mm c/c,
one flange fixed to the ceiling with dash fastener 12.5mm dia
x 50mm long with 6mm dia bolts, other flange of cleat fixed to
the angle hangers of 25 x10 x0.50mm of required length with
nuts & bolts of required size and other end of angle hanger
fixed with intermediate G.I channels 45 x15 x 0.90mm running
at the spacing of 1200 mm c/c, to which the ceiling section
0.5mm thick bottom wedge of 80mm with tapered flanges of
26 mm each having lips of 10.5mm, at 450mm c/c, shall be
fixed in a direction
perpendicular to G.I intermediate channel with connecting

clip made out of 2.64mm dia x 230mm long G.I wire at every
junction, including fixing perimeter channels 0.50mm thick
27mm high having flanges of 20mm and 30mm long, the
perimeter of ceiling fixed to wall/ partitions with the help of
Rawl plugs at 450mm centre, with 25mm long dry wall screws
@ 230mm interval, including fixing of Calcium Silicate Board
to ceiling section and perimeter channels with the help of dry
wall screws of size 3.5 x25mm at 230mm c/c,
including jointing & finishing to a flush finish of tapered and

square edges of the board with recommended jointing
compounds, jointing tapes, finishing with jointing compounds
in three layers covering up to 150mm on both sides of joints
and two coats of primer suitable for boards, all as per
manufacture's specification and also including the cost of
making opening for light fittings, grills, diffusers, cut outs
made with frame of perimeter channels suitably fixed, all
complete as per drawings, specification and direction of the
Engineer in charge but excluding the cost of painting with:
12.59.1 8 mm thick Calcium Silicate Board made with Calcareous &

Siliceous materials reinforced with cellulose fibre
manufactured through autoclaving process.

Details of cost for 10.8 m x 9.6m = 103.68sqm
MATERIALS:
Area = 103.68 sq.m +
Add. Wastage of5% = 5.18 Sq.m Total =
108.86 Sqm
MATERIALS :
8699 8 mm thick tapered edge calcium silicate board sqm 108.8600
7010 G.I Ceiling Section (80 x26mm x26mm x10.5mm each lip x metre 238.1400
0.55 mm)

15x45x15x0.90mm)
25x10x0.50mm)
long GI wire)
head with slots
bolt
7018 Joint Tape roll (120mm Roll) roll 1.2700
7021 Primer ( for gypsum board// calcium silicate board) litre 18.6600
9977 Carriage L.S. 447.2000
9999 Sundries i.e rawl plug, scaffolding etc. L.S. 807.3000
LABOUR :
0114 Beldar day 31.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 103.68 sqm.
Cost of 1 sqm.
Say
12.6 Providing and fixing thermal insulation of ceiling (under deck

insulation) with Resin Bonded Rockwool conforming to IS:
8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin
Polythene bags fixed to ceiling with metallic cleats (50x50x3
mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire
mesh, for top most ceiling of building.

Area for 10.00 sqm.
(Finished surface)=10.00 sqm.+
Add 10% for overlapping &wastage= 1.00 sqm.
Total= 11.00 sqm
7273 Resin Bonded Rockwool 48 kg/m3 sqm 11.0000
9999 Sundries including GI wire 20 SWG and polythene bags L.S. 104.0000
200gms
9999 GI chicken mesh 12.5mm x 24 SWG L.S. 351.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
12.61 Providing and fixing thermal insulation with Resin bonded

rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm
thick, wrapped in 200 G virgin Polythene bags placed over
existing false ceilng and held in position by criss-crossing Gl
wire.

Area for 10.00sqm. (Finished surface)=10.00sqm.+
Add 10% for overlapping &wastage= 1.00sqm.
Total= 11.00sqm
9999 Sundries including GI wire 20 SWG and polythene bags L.S. 52.0000
200gms
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
rock wool conforming to IS: 8183, having density 48 kg/m3,50
mm thick, wrapped in 200 G Virgin Polythene Bags fixed to
wall with screw, rawel plug & washers and held and in
position by criss crossing GI wire etc. complete as per
directions of Engineer-in- Charge.

Area for 10.00sqm. (Finished surface)=10.00sqm.+
Add 10% for overlapping &wastage= 1.00sqm.
Total= 11.00sqm
9999 Sundries including GI wire 20 SWG and Virgin polythene bags L.S. 52.0000
200 gram and Carriage

9999 Sundries (screws & washers) L.S. 20.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1 sqm
Say
12.63 Providing and applying two coats of High Albedo paint having
minimum Solar Reflective Index (SRI) 108 (with solar
reflectance & thermal emittance tested as per ASTM) C 1549
and ASTM C 1371 respectively), VOC less than 10 cc/gm. The
coating thickness and the methodology of application shall
strictly as per manufacturer's specifications and as approved
by Engineer-in-Charge. Surface preparation includes cleaning
with metal wire brush to remove all dust, fungus etc., washing
with water all complete. The contractor shall give guarantee
for the performance of SRI and also the durability of coating,
all complete as per direction of Engineer-in-Charge.

. MATERIALS :
7238 High Albedo paint kg 7.1700
LABOUR :
0114 Beldar (for cleaning the surface) day 0.5400
9999 Sundries (Brushes & T&P etc. L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1 sqm
Say
12.64 Providing & fixing at all heights, levels and locations Mill finish
Aluminium alloy roofing sheets of alloy IS designation 31500,
temper Hx8 conforming to IS 737 and dimensions as per IS
code 2676 with characteristics of good formability and
corrosion resistance. The profile sheets shall be fixed to truss
members in slope or required pitch or curvature with Hex cap
headed self drilling/tapping Stainless steel screws M6, 50 mm
long with 3 mm EPDM seal washer etc. all inclusive of labour,
scaffolding, T&P and sundries etc. complete as per directions
of the Engineer-In-Charge. (Cost of truss/frame work shall be
paid separately).
.
12.64.1 0.56 mm, Aluminium troughed profile with center to center

pitch of 200 mm, depth of 32 mm, overall profile width1092
mm, cover width 1000mm

Consider a shed of 20 x 10 meters.
(External dimensions of plinth)
MATERIAL:
Sheets used = 20 Nos x 10.70mx1.092m= 233.69sqm.
Total = 240.70 sqm
3051 0.56 mm, Aluminium troughed profile with center to center sqm 240.7000
pitch of 200 mm, depth of 32 mm, overall profile width1092
mm, cover width 1000mm

3074 Stainless steel self tapping screw of 6x50mm with SS hex cap 100 Nos 8.6500
and 3mm thick EPDM seal
(per sqm 4 nos) 216.14x4=864.55 no's
9999 Carriage of screws, washers L.S. 8.0600
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.2 0.71 mm, troughed profile with center to center pitch of 200
mm, depth of 32 mm, overall profile width1092 mm, cover
width 1000mm.

MATERIAL:
Total = 240.70 sqm
3052 0.71 mm, troughed profile with center to center pitch of 200 sqm 240.7000
width 1000mm.

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.3 0.91 mm, troughed profile with center to center pitch of 200
width 1000mm.

MATERIAL:
Total = 240.70 sqm
3053 0.91 mm, troughed profile with center to center pitch of 200 sqm 240.7000
width 1000mm.

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.4 0.56mm Aluminium profile with center to center pitch of 175
mm, depth of 46mm, top crest width of 41mm, bottom valley
width of 80mm, overall profile width of 1144mm, cover width
1050mm.

MATERIAL:
Total = 239.56 sqm
3054 0.56mm Aluminium profile with center to center pitch of 175 sqm 239.5600
1050mm.

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say

1050mm.

MATERIAL:
Total = 239.56 sqm
3055 Aluminium profile sheet 0.71mm thick with center to center sqm 239.5600
pitch of 175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say

width
of 80mm, overall profile width of 1144mm, cover width
1050mm.

MATERIAL:
Total = 239.56 sqm
pitch of 175 mm, depth of 46mm, top crest width of 41mm,
bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm
(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.7 0.56mm Aluminium Circular (sinusoidal) profile with center to

center pitch of 75 mm, depth of 19 mm, overall profile width
1250mm,cover width 1150mm.

MATERIAL:
Total = 247.97sqm
3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick sqm 247.9700
with center to center pitch of 75 mm, depth of 19 mm, overall
profile width 1250mm,cover width 1150mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say


MATERIAL:
Total = 247.97sqm
3058 0.71mm Aluminium Circular (sinusoidal) profile with center to sqm 247.9700

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say

MATERIAL:
Total = 247.97sqm
3059 0.91mm Aluminium Circular (sinusoidal) profile with center to sqm 247.9700

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65 Providing & fixing at all heights, levels and locations colour
finish Aluminium alloy roofing sheets of alloy IS designation
31500, temper Hx8 conforming to IS 737 and dimensions as
per IS code 2676 with characteristics of good formability and
corrosion resistance. The profile sheets shall be fixed to truss
members in slope or required pitch or curvature with Hex cap
headed self drilling/tapping Stainless steel screws M6, 50 mm
long with 3 mm EPDM seal washer etc. all inclusive of labour,
scaffolding, T&P and sundries etc. complete as per directions
of the Engineer-In-Charge. (Cost of truss/frame work shall be
paid separately).
12.65.1 0.56 mm, Aluminium Colour coated troughed profile with

center to center pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm.

MATERIAL:
Sheets used = 20 Nos x 10.70mx1.092m = 233.69sqm.
Total = 240.70 sqm
3060 0.56 mm, Aluminium Colour coated troughed profile with sqm 240.7000

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say


MATERIAL:
Total = 240.70 sqm
3061 Precoated Aluminium troughed profile sheet 0.71mm thick sqm 240.7000
with center to center pitch of 200 mm, depth of 32 mm,
overall profile width1092 mm, cover width 1000mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say


MATERIAL:
Total = 240.70 sqm
3062 Precoated Aluminium troughed profile sheet 0.91mm thick sqm 240.7000
with center to center pitch of 200 mm, depth of 32 mm,
overall profile width1092 mm, cover width 1000mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.4 0.56mm Aluminium colour profile with center to center pitch

of 175 mm, depth of 46mm, top crest width of 41mm, bottom
valley width of 80mm, overall profile width of 1144mm, cover
width 1050mm.

MATERIAL:
Total = 239.56 sqm
3063 Aluminium colour coated profile sheet 0.56mm thick with sqm 239.5600
center to center pitch of 175 mm, depth of 46mm, top crest
width of 41mm, bottom valley width of 80mm, overall profile
width of 1144mm, cover width 1050mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.5 0.71mm Aluminium colour coated profile with center to

center pitch of 175 mm, depth of 46mm, top crest width of
41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm.

MATERIAL:
Total = 239.56 sqm
3064 Aluminium colour coated profile sheet 0.71mm thick with sqm 239.5600

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.6 0.91mm Aluminium colour coated profile with center to

center pitch of 175 mm, depth of 46mm, top crest width of
41mm, bottom valley width of 80mm, overall profile width of
1144mm, cover width 1050mm.

MATERIAL:
Total = 239.56 sqm
3065 Aluminium colour coated profile sheet 0.91mm thick ith sqm 239.5600

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.7 0.56 mm Aluminium profile with center to center pitch of

177.5 mm, depth of 28.5 mm, 987mm overall profile width,
cover width 900mm

MATERIAL:
Total = 239.31 sqm
pitch of 177.5 mm, depth of 28.5 mm, 987mm overall profile
width, cover width 900mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.8 0.71 mm Aluminium profile with center to center pitch of
177.5 mm, depth of 28.5 mm, 987mm overall profile width,
cover width 900mm

MATERIAL:
Total = 239.31 sqm
pitch of 177.5 mm, depth of 28.5 mm, 987mm overall profile
width, cover width 900mm

(per sqm 4 nos) 216.14x4=864.55 no's
9999 Sundries L.S. 39.5200
LABOUR:
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.66 Providing and fixing of Pre-coated colour or mill finish

Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy
31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO
designation)] For colour, coating shall be 5-7 microns epoxy
primer on both sides of the sheet and polyester top coat 15-
18 microns, using self drilling/tapping SS screws of size 6 x
50mm with 3mm thick EPDM seal and SS plain washer
complete :
12.66.1 Precoated/mill finish aluminium Ridges plain (500- 600mm)

Detail of cost for 20.20 metre
One piece plain ridges
Consider a shed of 20x10m (external dimensions at plinth)
Length of ridges 20.2 metre + 5% wastage = 1.01 metre. Total
=23.11 metre.
MATERIAL
3068 Precoated/Mill finish Aluminium plain ridges 0.71 mm metre 23.1100
TCT/plain
and 500- 600 mm wide
9977 Carriage (The ridge is to be fixed with the same screws as the
Sheets) L.S. 13.5200

LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
12.66.2 Precoated/mill finish aluminium Flashings/ Aprons (Up to 600

mm)
MATERIAL
=23.11 metre.
3069 Precoated/Mill finish Aluminium flashings/aprons 0.50mm metre 23.1100
TCT/plain and wide up to 600 mm
8877 Carriage of apron pieces. (The apron pieces are to be fixed L.S. 3.2500
with the same screws as the sheets)
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
12.66.3 Precoated/mill finish aluminium North light curves

Details of North light curve 20.20 metres long complete
length
MATERIAL
=23.11 metre.
3070 Precoated/Mill finish Aluminium plain north light curves metre 23.1100
9977 Carriage of screws, washers and curves L.S. 9.8800
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
12.66.4 Precoated/mill finish aluminium Barge board (Up to 200 mm)

Details of cost for 8.23 metres Completed length of barge
boards
MATERIAL
length of barge boards = 8.23 metre +
Add wastage @ 5% = 0.41 metre.
Total = 8.64 metre
3071 Precoated/mill finish aluminium Barge board (Up to 200 mm) metre 8.6400
1211 Washer for seam bolts 100 Nos 0.1000
3075 EPDM washer 100 Nos 0.5000
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 8.23 metre
Cost of 1 metre
Say
12.66.5 Precoated/mill finish aluminium Crimp curve

MATERIAL
crimp curve 20.2 metres long complete length and 1.06 metre
wide
Area 20.20 x 1.06 = 21.412 sqm +
Total = 22.483 sqm.
3072 Precoated/Mill finish Aluminium crimp curve sqm 22.4800
9977 Carriage of screws, washers and curves L.S. 9.8800
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 21.412 metre
Cost of 1 metre
Say
12.66.6 Precoated/mill finish aluminium Gutter (600 mm over all girth)

Detail of cost of 10 metre
0.63mm thick with zinc coating not less than 275gm/ sqm

3073 Precoated/Mill finish Aluminium gutter metre 10.0000
9977 Carriage of gutter L.S. 1.0400
3076 Stainless steel bolts & nuts 10 mm dia and 125 mm long round each 30.0000
head with slots
9977 Carriage of screws, seam bolts & washer L.S. 2.7300
LABOUR
9999 Sundries L.S. 12.6100
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
13.1 12 mm cement plaster of mix :

13.1.1 1:4 (1 cement: 4 fine sand)
MATERIAL
LABOUR
9999 Scaffolding and sundries L.S. 12.6100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.2 15 mm cement plaster on the rough side of single or half brick

wall of mix :
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.4.1 1:4 (1 cement: 4 coarse sand)
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.5 15 mm cement plaster on rough side of single or half brick

wall of mix:
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.7 12 mm cement plaster finished with a floating coat of neat

cement of mix :
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.8 15 mm cement plaster on rough side of single or half brick
wall finished with a floating coat of neat cement of mix :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a

floating coat of neat cement.
13.9.1 12 mm cement plaster
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.9.2 20 mm cement plaster

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.1 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished

with a floating coat of neat cement on the rough side of single
or half brick wall.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.11 8 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) finished with a
top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine
sand).

MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse
sand)
Top layer Cement mortar 1 : 6 (1 cement : 6 fine
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.12 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer
6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand)
finished
rough with sponge.

MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse
sand)
Top layer Cement mortar 1:3 (1 cement : 3 coarse
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust).

MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the

rough side of single or half brick wall.
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.16.1 1:3 (1 cement : 3 fine sand)
MATERIAL
LABOUR
9999 Extra for removing burrs, cleaning with wire brushes, pock L.S. 13.3900
making with pointed tool etc. complete.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished

with a floating coat of neat cement and thick coat of Lime
wash on top of walls when dry for bearing of R.C.C. slabs and
beams.

MATERIAL
LABOUR
9999 Extra for removing burrs, cleaning with wire brushes, pock L.S. 13.3900
making with pointed tool etc. complete
0776 Satna lime quintal 0.0100
9999 Indigo gum etc L.S. 2.0800
9999 Sundries ladder etc. L.S. 0.5200
0141 White Washer day 0.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.18 Neat cement punning.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.19 Rough cast plaster up to 10 m height above ground level with

a mixture of sand and gravel or crushed stone from 6 mm to
10 mm nominal size, dashed over and including the fresh
plaster in two layers, under layer 12 mm cement plaster 1:4 (1
cement : 4 coarse sand) and top layer 10 mm cement plaster
1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded
hydrated lime by volume of cement.
13.19.1 Ordinary cement finish using ordinary cement

MATERIAL
Under layer 12 mm thick cement plaster Cement mortar 1 : 4
(1 cement : 4 coarse sand)
LABOUR
0101 Bhisti 0.9200
9999 Scaffolding and sundries 9.8800
Top layer 10 mm thick cement plaster Cement mortar 1 : 3 (1
cement : 3 fine sand)
3.3 Rate as per Item Number 3.3 of SH: Mortars 0.1200
0155 Mason (average) 0.6100
0144 Beldar 0.6900
0101 Bhisti 0.8500
1179 Crushed stone 2.36 mm to 12.5 mm size 0.1000
0101 Bhisti 0.0100
0777 Dry hydrated lime (factory made) 0.0900
9977 Carriage of lime 3.6400
0144 Beldar 0.5000
0101 Bhisti 0.1000
Labour for scooping
0123 Mason (brick layer) 1st class 0.2500
0144 Beldar 0.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.2 Pebble dash plaster up to 10 m height above ground level

with a mixture of washed pebble or crushed stone 6 mm to
12.5 mm nominal size, dashed over and including fresh plaster
in two layers under layer 12 mm cement plaster 1:4 (1 cement
: 4 coarse sand) and top layer 10 mm cement plaster with
cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10%
finely grounded hydrated lime by volume of cement.

MATERIAL
Under layer 12 mm thick cement plaster Cement mortar 1 : 4
LABOUR
0101 Bhisti 0.9200
Top layer 10 mm thick cement plaster Cement mortar 1 : 3 (1
3.3 Rate as per Item Number 3.3 of SH: Mortars 0.1200
0144 Beldar 0.6900
0101 Bhisti 0.8500
1179 Crushed stone 2.36 mm to 12.5 mm size 0.1000
0101 Bhisti 0.0100
0777 Dry hydrated lime (factory made) 0.0900
9977 Carriage of lime 3.6400
0144 Beldar 0.5000
0101 Bhisti 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.21 Extra for providing and mixing water proofing material in

cement plaster work in proportion recommended by the
manufacturers.

Detail of cost for 12mm cement plaster 1:3 (1 cement :3 sand)
= 10 sqm or 1.48 bags of cement used in the mix.
Cement required for 10 sqm = 73.89kg.

Water proofing material required @ 1 kg per 50 kg of cement
= 1.48 kg.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.48 bags of cement used in the mix
Cost of 1.00 bag of 50 kg cement used in the mix
Say
13.22 Extra for plastering exterior walls of height more than 10 m

from ground level for every additional height of 3 m or part
thereof.

Scaffolding and sundries L.S. 53.8200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.23 Extra for plastering on circular work not exceeding 6 m in

radius:
13.23.1 In one coat
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.23.2 In two coats

LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.24 Extra for plastering done on moulding, cornices or

architraves including neat finish to line and level:
13.24.1 In one coat
LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.24.2 In two coats

LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.25 Extra for plastering:

13.25.1 Spherical ceiling
LABOUR
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.25.2 Groined ceiling

LABOUR
9999 Sundries L.S. 34.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.25.3 Flewing soffits


9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.26 Providing and applying plaster of paris putty of 2 mm

thickness over plastered surface to prepare the surface even
and smooth complete.

MATERIAL
Plaster of paris 10x0.002x1121 = 22.42kg
Add 2% wastage= 0.45kg
Total = 22.87kg. Say23kg
Carriage of plaster of paris L.S. 3.9000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.27 Extra for lining out plaster to imitate stone or concrete blocks
walling.
LABOUR
9999 Solution of lime putty L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.28 12 mm thick plain cement mortar bands in cement mortar 1:4

(1 cement : 4 fine sand):
13.28.1 Flush Band

Detail of cost for 10 metre long and 10 cm wide band
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre long and 10 cm wide band
Cost of 1.00 metre long and 1 cm wide band
Say
13.28.2 Sunk Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.28.3 Raised Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.28.4 Moulded Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.29 18 mm thick plain cement mortar band in cement mortar 1:4

(1 cement : 4 fine sand)
13.29.1 Flush Band
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.29.2 Sunk Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.29.3 Raised Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.29.4 Moulded Band

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.3 18 mm thick moulded cement mortar band in two coats under

layer 12 mm thick with cement mortar 1:5 (1 cement : 5
coarse sand) top layer 6 mm thick with cement mortar 1:4 (1
cement : 4
fine sand).

MATERIAL
cement mortar 1 : 4 (1 cement : 4 fine sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Say
13.31 Pointing on brick work or brick flooring with cement mortar

1:3 (1 cement : 3 fine sand):
13.31.1 Flush / Ruled/ Struck or weathered pointing

MATERIAL
LABOUR
9999 Scaffolding and racking out joints including sundries L.S. 14.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.31.2 Raised and cut pointing

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement :
3 fine sand):
13.32.1 Flush/ Ruled/ Struck or weathered pointing
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3

fine sand) :
13.33.1 Flush/ Ruled pointing
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.33.2 Raised and cut pointing

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.34 Raised and cut pointing on stone work in white cement

mortar 1:3 (1 white cement : 3 marble dust).
MATERIAL
White Cement mortar 1:3 (1 white cement : 3 marble dust)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1

cement : 2 fine sand):
13.35.1 Flush/ Ruled pointing

MATERIAL
Cement mortar 1:2 (1 cement : 2 fine sand)
LABOUR
9999 Scaffolding and racking out joints including
sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.36 Extra for pointing on walls on the outside at height more than
10 m from ground level for every additional height of 3 m or
part there of.

LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.37 White washing with lime to give an even shade :
13.37.1 New work (three or more coats)

MATERIAL
0775 Dehradun white lime quintal 0.0300
9977 Carriage of lime L.S. 0.9100
LABOUR
9999 Sundries ladders etc L.S. 2.7300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.38 Satna lime wash on walls with one coat.

MATERIAL
0776 Satna lime quintal 0.0100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.39 Colour washing such as green, blue or buff to give an even

shade :
13.39.1 New work (two or more coats) with a base coat of white
washing with lime
MATERIAL
9999 Add for colouring stuff L.S. 0.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.39.2 New work (two or more coats) with a base coat of whiting

MATERIAL
9999 Add for colouring stuff L.S. 0.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.41 Distempering with oil bound washable distemper of approved

brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer
MATERIAL
0808 Water thinnable cement primer for interior wall surface, litre 0.7000
having VOC content less than 50 gms/lit.
9999 Brushes, putty etc L.S. 7.1500
9988 Sundries including Carriage L.S. 8.0600
0802 Acrylic distemper 1st quality , having VOC content less than 50 kilogram 1.5000
grams/ litre
9999 Brushes, sand paper and putty for filling
holes L.S. 11.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.42 Distempering with 1st quality acrylic distemper (ready mixed)

having VOC content less than 50 gms/litre, of approved
manufacturer, of required shade and colour complete, as per
manufacturer's specification.
13.42.1 Two or more coats on new work

MATERIAL
grams/ litre
9999 Brushes, sand paper and putty for filling holes L.S. 11.5700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.43 Applying one coat of water thinnable cement primer of

approved brand and manufacture on wall surface :
13.43.1 Water thinnable cement primer

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.44 Finishing walls with water proofing cement paint of required

shade :
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

MATERIAL
0851 Water proofing cement paint kilogram 3.8400
LABOUR
9999 Brushes, sand paper etc L.S. 7.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied @
2.20kg/10 sqm

MATERIAL
8507 Textured exterior paint litre 3.2800
0837 Acrylic Exterior Primer kilogram 2.2000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.46 Finishing walls with Acrylic Smooth exterior paint of required

shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20
kg/10 sqm)

MATERIAL
8505 Acrylic exterior paint litre 1.6700
0837 Acrylic Exterior Primer Kg 2.2000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.47 Finishing walls with Premium Acrylic Smooth exterior paint

with Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20
kg/10 sqm)

MATERIAL
8506 Premium Acrylic exterior paint litre 1.4300
0837 Acrylic Exterior Primer kilogram 2.2000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.48 Finishing with Deluxe Multi surface paint system for interiors
and exteriors using Primer as per manufacturers specifications
:
13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over
and including one coat of Special primer applied @ 0.75 ltr
/10 sqm

MATERIAL
8504 Multi surface paint litre 1.2500
8509 Special Primer (C.W.) litre 0.7500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.48.2 Painting wood work with Deluxe Multi Surface Paint of

required shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @0.75 ltr/10 sqm of
approved brand and manufacture

MATERIAL
8509 Special Primer (C.W.) litre 0.7500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an
even shade. Two or more coat applied @ 0.90 ltr/10 sqm over
an under coat of primer applied @ 0.80 ltr/10 sqm of

MATERIAL
8510 Metal Primer (U.G.) litre 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Finishing walls with 100% Premium acrylic emulsion paint

13.48A.1 having VOC less than 50 gm/litre and UV resistance as per IS
15489:2004, Alkali & fungal resistance, dirt resistance exterior
paint of required shade (Company Depot Tinted) with silicon
additives.
13.48A New work (Two or more coats applied @ 1.43 litre/ 10 sqm.
Over and including priming coat of exterior primer applied @
0.90 litre/10 sqm.

Details of cost for 10 sqm (Based on item no 13.47)
Material
0836 100% Premium acrylic dirt resistance, Silicone litre 1.4300
additives exterior paint
0837 Acrylic Exterior Primer litre 0.9000
Labour
9999 Brushes, sand paper etc. L.S. 7.1500
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
13.5 Applying priming coat:
13.50.1 With ready mixed pink or Grey primer of approved brand and
manufacture on wood work (hard and soft wood)

MATERIAL
0806 Ready mixed pink or grey primer on wood work (hard and soft litre 0.7500
wood) having VOC content less than 50 grams/ litre
9999 Putty L.S. 2.7300

LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.50.2 With ready mixed aluminium primer of approved brand and

manufacture on resinous wood and plywood

MATERIAL
4201 Aluminium primer litre 0.7500
9999 Putty L.S. 2.7300
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.50.3 With ready mixed red oxide zinc chromate primer of approved
brand and manufacture on steel galvanised iron/ steel works

MATERIAL
LABOUR
9999 Brushes, sand paper including sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.50.4 With ready mixed red oxide zinc chromate primer of approved
brand and manufacture on steel work (second coat)
MATERIAL
LABOUR
9999 Brushes, sand paper including L.S. 7.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.51 Painting with silicon & acrylic emulsion based water thinnable
sealer of approved brand and manufacture on wet or patchy
portion of plastered surfaces :
13.51.1 One coat

MATERIAL
0801 Silicon and acrylic emulsion litre 1.8000
9999 Putty etc L.S. 2.7300
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.51.2 Two coats
MATERIAL
0801 Silicon and acrylic emulsion litre 2.8800
9999 Putty etc L.S. 2.7300
LABOUR
9999 Sundries L.S. 17.2600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.52 Finishing with Epoxy paint (two or more coats) at all locations
prepared and applied as per manufacturer's specifications
including appropriate priming coat, preparation of surface,
etc.
complete.
13.52.1 On steel work

PRIMING COAT
MATERIAL
9999 Putty L.S. 2.7300
LABOUR
9999 Sundries L.S. 10.6600
EPOXY PAINTING
MATERIAL
7239 Epoxy paint litre 1.2500
LABOUR
9999 Putty, brushes, sand paper etc L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.52.2 On concrete work

PRIMING COAT
MATERIAL
having VOC content less than 50 grams/ litre
9999 Putty L.S. 13.5200
LABOUR
EPOXY PAINTING
MATERIAL
7239 Epoxy paint litre 1.2100
9999 Materials for filling in holes and cracks L.S. 6.7600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.53 Painting on G.S. sheet with synthetic enamel paint of

approved brand and manufacture of required colour to give
an even shade :
13.53.1 New work (two or more coats) including a coat of approved

steel primer but excluding a coat of mordant solution

PRIMING COAT
MATERIAL
LABOUR
Synthetic enamel painting
MATERIAL
shade
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.54 Applying a coat of mordant solution on G.S. sheet:
13.54.1 With a solution of 38 gms of copper acetate in a litre of soft

water
MATERIAL
4203 Copper acetate kilogram 0.0380
9999 Soft Water L.S. 1.8200
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 25.00 sqm
Cost of 1.00 sqm
Say
13.54.2 With a solution made of 13 gms of hydrochloric acid

in a solution of 13 gms each of copper chloride, copper nitrate
and ammonium chloride dissolved in a litre of soft water

MATERIAL
4204 Hydrochloric acid kilogram 0.0130
4205 Copper chloride kilogram 0.0130
4206 Copper nitrate kilogram 0.0130
4207 Ammonium chloride kilogram 0.0130
9999 Soft Water L.S. 1.8200
LABOUR
9999 Sundries L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 25.00 sqm
Cost of 1.00 sqm
Say
13.55 Painting (two or more coats) on rain water, soil waste and
vent pipes and fittings with black anticorrosive bitumastic
paint of approved brand and manufacture, over and including
a priming
of ready mixed zinc chromate yellow primer on new work:
13.55.1 100 mm diameter pipes

Detail of cost for 30 mtrs
Area=22/7 x106.4mm x30m =10.032sqm
MATERIAL
LABOUR
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.9500
LABOUR
9999 Putty, sand paper etc L.S. 5.3300
9999 Wire brushes for cleaning L.S. 5.3300
9999 Extra for delays L.S. 61.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say

Area=22/7 x0.1572 m x30m =14.82sqm
MATERIAL
LABOUR
MATERIAL
LABOUR
9999 Sundries L.S. 11.9600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
vent pipes and fittings with synthetic enamel paint of
approved brand and manufacture and required colour over a
priming coat of
approved steel primer on new work.

Area=22/7x0.1064m x30m =10.032sqm
MATERIAL
LABOUR
9999 Sundries L.S. 10.7900
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 1.1600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say

Area=22/7 x157.2mm x30m =14.82sqm
MATERIAL
LABOUR
9999 Sundries L.S. 15.9900
MATERIAL
LABOUR
9999 Sundries L.S. 10.0100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.57 Painting with oil type wood preservative of approved brand

and manufacture :
13.57.1 New work (two or more coats)

MATERIAL
0859 Oil type wood preservative litre 1.0000
LABOUR
9999 Brushes etc L.S. 4.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.58 Providing and applying two coats of fire retardant paint on

cleaned wood / ply surface @ 3.5 sqm per litre per coat
including preparation of base surface as per
recommendations of manufacturer
to make the surface fire retardant.

MATERIAL
7240 Fire retardant paint litre 5.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12
litre coal tar per sqm in the first coat and second coat
respectively.

MATERIAL
9999 Lime L.S. 1.4300
0324 Coal Tar litre 2.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.6 Wall painting with acrylic emulsion paint of approved brand

and manufacture to give an even shade :

MATERIAL
0804 Premium plastic acrylic emulsion of interior grade, having VOC litre 1.2100
content less than 50 grams/ litre
9999 For filling holes and cracks with putty etc L.S. 6.7600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of

suitable shade with ordinary paint of approved brand and
manufacture

MATERIAL
wood) having VOC content less than 50 grams/ litre
9999 Putty L.S. 2.7300

LABOUR
9999 Sundries L.S. 10.7900
MATERIAL
9977 Carriage of paint and material L.S. 1.4300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.63 Painting with aluminium paint of approved brand and

manufacture to give an even shade .

MATERIAL
0826 Aluminium paint litre 0.8000
9999 Putty etc L.S. 5.3300
LABOUR
9999 Sundries L.S. 11.9600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.64 Painting with acid proof paint of approved brand and


MATERIAL
0827 Acid proof paint (chocolate or black) litre 1.1600
9999 Putty etc L.S. 5.3300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.65 Painting with black anti-corrosive bitumastic paint of

approved brand and manufacture to give an even shade :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.67 Varnishing with varnish of approved brand and manufacture :
13.67.1 Two or more coats of glue sizing with copal varnish over an
under coat of flatting varnish
MATERIAL
0856 Ordinary varnish litre 0.7000
0857 Superior copal varnish litre 1.1600
9999 Putty for repair to holes etc L.S. 5.3300
LABOUR
(0.36+0.54=0.90)
(0.36+0.54=0.90)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.67.2 Two or more coats glue sizing with spar varnish or an under
coat of flatting varnish
MATERIAL
0858 Superior spar varnish litre 1.2600
9999 Repair etc L.S. 2.7300
LABOUR
(0.36+0.54=0.90)
(0.36+0.54=0.90)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.68 French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood

filler
MATERIAL
1000 Spirit litre 1.6300
9999 Pigment L.S. 7.1500
0999 Shellac kilogram 0.2400
9999 White woollen cloth, putty L.S. 16.1200
9999 Sand paper cotton etc L.S. 13.3900
9999 Linseed oil L.S. 1.4300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.69 Polishing on wood work with ready mixed wax polish of

13.69.1 New work
MATERIAL
0855 Wax polish (ready made) kilogram 0.5000
LABOUR
9999 Soap, brushes, cloth etc L.S. 4.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.7 Floor polishing on masonry or concrete floors with wax polish

of approved brand and manufacture.
MATERIAL
LABOUR
9999 Acetic acid soap, cloth etc L.S. 5.3300
9988 Sundries including Carriage L.S. 8.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.71 Lettering with black Japan paint of approved brand and

manufacture
Detail of cost for 100 letters of 15 cm height
MATERIAL
0829 Black Japan paint litre 0.5600
LABOUR
9999 Painting brushes, turpentine, stencil etc L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 letters of 15 cm height
Say
13.72 Washed stone grit plaster on exterior walls height up to 10
metre above ground level, in two layers, under layer 12 mm
cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the
under layer with scratching tool, applying cement slurry on
the under layer @ 2 Kg of cement per square metre, top layer
15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2
stone chipping 10 mm nominal size), in panels with groove all
around as per approved pattern, including scrubbing and
washing the top layer with brushes and water to expose the
stone chippings ,complete as per specification and direction of
Engineer-in-charge (payment for
providing grooves shall be made separately).

MATERIAL
Under layer 12 mm cement plaster with Cement mortar 1 : 4
LABOUR
Applying cement slurry
Top layer 15 mm thick stone chipping plaster Quantity
required = 0.172 cum including wastage
Preparation of cement concrete mix 1:1/2:2 (1 cement : 1/2
coarse sand : 2 stone chipping 10 mm nominal size)
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.1400
LABOUR
0123 Mason (brick layer) 1st class Day 1.7500
0114 Beldar Day 1.7500
0101 Bhisti Day 0.3000
Labour for washing
0123 Mason (brick layer) 1st class Day 1.0000
9999 Sundries soft brushes etc L.S. 25.2200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.73 Forming groove of uniform size in the top layer of washed

stone grit plaster as per approved pattern using wooden
battens, nailed to the under layer, including removal of
wooden battens, repair to the edges of panels and finishing
the groove complete as per specifications and direction of the
Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove

Second class kail wood in plank
30 x0.015 x0.015m = 6.75 cudm
Wastage @ 10% = 0.68
Total = 7.43 cudm
Assuming that the battens shall become unserviceable after
using 5 times
Cost for using once = 7.43 / 5 = 1.48 cudm
MATERIAL
9977 Carriage of wood L.S. 0.3900
Labour for making battens
Labour for nailing the battens to under layer and finishing and
repairing grooves
9999 Nails and cement mortar L.S. 71.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.73.2 20 mm wide and 15 mm deep groove

Second class kail wood in plank
30 x0.02 x0.015m = 9.00 cudm
Wastage @ 10% = 0.90
Total = 9.90 cudm
Assuming that the battens shall become unserviceable after
using 5 times
Cost for using once = 9.9 / 5 = 1.98 cudm
MATERIAL
9977 Carriage of wood L.S. 0.5200
Labour for making battens
Labour for nailing the battens to under layer and finishing and
repairing grooves
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.74 Extra for washed grit plaster on exterior walls of height more
than 10 m from ground level for every additional height of 3
m or part thereof.
MATERIAL
9999 Sundries L.S. 28.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.75 Extra for washed stone grit plaster on circular work not
exceeding 6 m in radius (in two coats).
LABOUR
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.76 Forming groove of uniform size from 12x12 mm and up to
25x15 mm in the top layer of washed stone grit plastered
surface as per approved pattern, including providing and
fixing aluminium channels of appropriate size and thickness
(not less than 2 mm), nailed to the under layer with rust proof
screws and nails and finishing the groove complete as per
specifications and direction
of the Engineer-in-Charge.

Aluminium channel section 15 x 15 x 2 mm (weight 0.221
kg/mtr)
Qty = 30.00 m
5% wastage = 1.5 m
Total = 31.5 m @0.221 kg/m = 6.96 kg
7306 Aluminium T or L sections kilogram 6.9600
9977 Carriage L.S. 38.9800
Labour for fixing
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.77 Extra for using white cement in place of ordinary cement in

the top layer of the item of washed stone grit plaster.

MATERIAL
Add for
Deduct for ordinary cement
0367 Portland Cement (OPC-43 grade) tonne -0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.78 Providing and applying 12 mm thick (average) premixed

formulated one coat gypsum lightweight plaster having
additives and light weight aggregates as vermiculite/ perlite
respectively conforming to IS: 2547 (Part - 1 & II) 1976,
applied on hacked / uneven background such as bare brick/
block/ RCC work on walls & ceiling at all floors and locations,
finished in smooth line and level etc. complete.

MATERIAL
Premixed super white gypsum plaster
10 sqm @ 16.14 kg/sqm = 161.40 +
5% wastage = 8.07
Total= 169.47 kg
0868 Premixed super white gypsum plaster. kilogram 169.4700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.79 Extra for addition of synthetic Polyester triangular fibre of

length 6 mm, effective diameter 10-40 microns and specific
gravity of 1.34 to 1.40 in cement plaster/mortar by using 125
gms. of synthetic Polyester triangular fibre for 50 Kgs. cement
used in cement mortar as per directions of Engineer-in-
Charge.
Detail of cost for per bag of 50 kg of cement used in mortar
MATERIAL
8733 Synthetic polyester triangular fibre of length 6 mm, effective kilogram 0.1250
diameter 10-40 microns and specific gravity of 1.34 to 1.40
including labour for mixing

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per bag of 50 kg of cement
Cost per bag of 50 kg of cement
Say
13.8 Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth
complete.

MATERIAL
0824 Cement base wall care putty kilogram 14.5800
10x0.001x1429 = 14.29kg
Add 2% wastage= 0.29kg
Total = 14.58kg Say 14.58 kg
LABOUR
Mason (for plaster of paris work) 1st class 0.4500
Beldar 0.4500
Scaffolding and sundries 40.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.81 Distempering with 1st quality acrylic distemper, having VOC
(Volatile Organic Compound ) content less than 50 grams/
litre, of approved brand and manufacture, including applying
additional coats wherever required, to achieve even shade
and colour.
13.81.1 One coat

MATERIAL
gm/kg
9999 Brushes, putty etc. L.S. 0.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.81.2 Two coats

MATERIAL
gm/kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre, of
approved brand and manufacture, including applying
additional coats wherever required, to achieve even shade
and colour.
13.82.1 One coat

MATERIAL
0803 Acrylic emulsion , having VOC content less than 50 gm/ltr litre 0.5300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.82.2 Two coats

MATERIAL
0803 Acrylic emulsion , having VOC content less than 50 gm/ltr litre 0.8400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.83 Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less
than 50 grams/ litre of approved brand and manufacture,
including applying additional coats wherever required to
achieve even shade and colour.
13.83.1 One coat

MATERIAL
0804 Premium acrylic emulsion of interior grade, having VOC litre 0.3800
content less than 50 gm/ltr.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.83.2 Two coats

MATERIAL
0804 Premium acrylic emulsion of interior grade, having VOC litre 0.6000
content less than 50 gm/ltr.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.85 Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )
content.
13.85.1 With ready mixed pink or grey primer on wood work (hard
and soft wood) having VOC content less than 50 grams/ litre

MATERIAL
wood) having VOC content less than 50 gms/lit.
9999 Putty L.S. 2.7300

LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.85.3 With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre
MATERIAL
Painter
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.86 6 mm plaster on cement concrete or reinforced cement

concrete work with white cement based polymer modified
self curing mortar of approved make as per the direction of
Engineer-In-
Charge.

MATERIAL
0772 White cement based polymer modified self curing compound kg 46.0000
in powder form
i/c 2% wastage
9977 Carriage of white cement based polymer modified self curing L.S. 7.8000
compound in powder form
LABOUR
9999 Extra for removing burrs, cleaning with wire brushes and pock L.S. 13.3900
making with pointed tools etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
13.87 White washing with lime to give an even shade :

13.87.1 Old work (two or more coats)
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.87.2 Old work (one or more coats)

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.88 Removing white or colour wash by scrapping and sand

papering and preparing the surface smooth including
necessary repairs to scratches etc. complete

LABOUR
9999 Sundries such as sand paper and scrapper L.S. 2.7300
9999 Repair to scratches L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.9 Distempering with 1st quality acrylic distemper (Ready mix)

having VOC content less than 50 grams/ litre of approved
brand and manufacture to give an even shade :

MATERIAL
grams/ litre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.91 Removing dry or oil bound distemper, water proofing cement

paint and the like by scrapping, sand papering and preparing
the surface smooth including necessary repairs to scratches
etc.
complete.

LABOUR
9999 Scrapper, sand paper etc. L.S. 6.2400
9999 Sundries including mortar to repair the
surface L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.92 Painting on G.S. sheet with synthetic enamel paint of

approved brand and manufacture of
required colour to give an even shade :

MATERIAL
LABOUR
9999 Putty, brushes sand paper etc. L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.93 Painting (two or more coats) on rain water, soil, waste and
vent pipes and fittings with black anticorrosive bitumastic
paint of approved brand and manufacture over and including
a priming coat of ready mixed zinc chromate yellow primer on
new work :

Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
13.94 Painting (one or more coats) on rain water, soil waste and
vent pipes and fittings with black
anticorrosive bitumastic paint of approved brand and
manufacture on old work :

Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
LABOUR
9999 Putty, sand paper brushes etc. L.S. 5.3300
9999 Extra for delay L.S. 34.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
LABOUR
9999 Sundries L.S. 11.9600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
vent pipes and fittings with aluminium paint of approved
brand and manufacture over a priming coat of ready mixed
zinc chromate yellow primer on new work :

Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area=22/7 x106.4x30m =10.032sqm
MATERIAL
LABOUR
0.18 x 10.032 / 7.67 = 0.24
9999 Sundries L.S. 10.7900
MATERIAL
0.61 x 10.032 / 7.67 = 0.80
LABOUR
0.41 x 10.032 / 7.67 = 0.54
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area=22/7 x157.12x30m =14.82 sqm
MATERIAL
LABOUR
0131 Painter Day 0.3600
0.18 x 14.82 / 7.67 = 0.36
9999 Sundries L.S. 15.9900
MATERIAL
0.61 x 14.82 / 7.67 = 1.72
LABOUR
0.41 x 14.82 / 7.67 = 0.80
9999 Sundries L.S. 10.0100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
13.96 Painting (one or more coats) on rain water, soil waste and
vent pipes and fittings with synthetic enamel paint of
approved brand and manufacture and required colour on old
work :

Area = 22/7x0.0814 mmx30 m = 7.67 sqm
MATERIAL
9999 Putty, sand paper etc. L.S. 0.3900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say

Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
LABOUR
9999 Sundries L.S. 11.9600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
13.97 Painting with oil type wood preservative of approved brand

and manufacture:

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.98 Wall painting with plastic emulsion paint of approved brand

and manufacture to give an even shade:
13.98.1 One or more coats on old work

MATERIAL
0804 Premium plastic acrylic emulsion of interior grade, having VOC litre 0.7300
content less than 50 grams/ litre
9999 Material for filling holes and cracks (putty etc.) L.S. 0.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say


MATERIAL
9977 Carriage of paint and materials L.S. 0.5200
LABOUR
9999 Putty L.S. 2.7300
9999 Brushes sand paper etc. L.S. 5.3300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.1 Painting with aluminium paint of approved brand and

manufacture to give an even shade:
MATERIAL
9999 Putty etc L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.101 Painting with acid proof paint of approved brand and


MATERIAL
0827 Acid proof paint (chocolate or black) litre 0.7000
9999 Putty etc L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.102 Painting with black anti-corrosive bitumastic paint of

approved brand and manufacture to give an even shade :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.103 French spirit polishing :

MATERIAL
1000 Spirit litre 0.9800
0999 Shellac kilogram 0.1300
9999 Turpentine oil sand paper cotton/woollen cloth putty etc. L.S. 10.7900
9999 Linseed oil L.S. 0.5200

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.104 Polishing on wood work with ready made wax polish of
approved brand and manufacture :
13.104.1 Old work
MATERIAL
LABOUR
9999 Soap, brushes, cloth etc L.S. 4.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.105 Re-lettering with black Japan paint of approved brand and

manufacture.
Detail of cost for 100 letters of 15 cm height
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per letter per cm height
Say
13.106 Painting (one or more coats) with black Japan paint of
approved brand and manufacture to give an even shade.

MATERIAL
9999 Putty etc. L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1sqm
Say
13.107 Providing and fixing C.P. brass chain and rubber plug complete
for sink or wash basin:
13.107.1 32 mm dia
Detail of cost for 1 no.
MATERIAL
1314 C.P.brass chain with 32 mm dia rubber plug each 1.0000
9988 Carriage of materials and fixing charges L.S. 8.0600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
13.107.2 40 mm dia
Detail of cost for 1 no.
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
13.108 Distempering with 1st quality acrylic distemper (ready made)

having VOC content less than 50 gm per ltr. of approved
manufacturer and of required shade and colour complete. as
per manufacturer's specification.

MATERIAL
grams/ litre
9988 Sundries including carriage of material L.S. 10.7600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.109 Finishing walls with water proofing cement paint of required

shade :
13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over
priming coat of primer applied @ 0.80 litres/10 sqm complete
including cost of Priming coat.

MATERIAL
8508 Primer for cement paint litre 0.8000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.11 Finishing walls with textured exterior paint of required shade :
13.110.1 Old work (Two or more coats on existing cement paint surface
applied @ 3.28 ltr/10 sqm.
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.111 Finishing walls with Acrylic Smooth exterior paint of required

shade :
13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on
existing cement paint surface
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.112 Finishing walls with Premium Acrylic Smooth exterior paint

with Silicone additives of required shade
13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over
existing cement paint surface
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.112.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.113 Varnishing with varnish of approved brand and manufacture:
13.113.1 One or more coats with copal varnish

MATERIAL
0857 Superior copal varnish litre 0.7000
9999 Repair to the surface L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.113.2 One or more coats with spar varnish

MATERIAL
0858 Superior spar varnish litre 0.7500
9999 Repair etc L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.114 Melamine polishing on wood work (one or more coat).

MATERIAL
7241 Melamine polish litre 0.6500
0006 Hire charges of Spraying machine including electric charges day 0.7800
9988 Carriage charge of Machine & Material L.S. 4.4200

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.115 Varnishing with flatting varnish of approved brand and

manufacture one or more coats on old work.
MATERIAL
9999 Glue, putty etc L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.116 Polishing in high gloss/matt finish melamine clear polish on

wood work in required colour/wooden shade texture with
following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper

80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to
dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of

finer grading with ample water to remove excess sealer layer
and make the surface further smooth after this wet rubbing,
then surface is applied with special grade melamine fillers to
fill all the small and big holes/grooves etc. Filler coat to be
allowed to dry for 4 to 6 hrs on which again a light wet
rubbing is done this surface is further allowed to dry for 12
hrs.
4. On this, 1st coat of melamine polish is applied with spray

gun using melamine clear polish and melamine thinner in
required proportion. This 1st coat is allowed to dry for 24 hrs
then this dry surface is again fine wet rubbed smooth, which
is further allowed to dry for 12 hrs
The final melamine polish is applied with compressor pressure

spray gun using melamine clear polish and melamine thinner
mixed in required proportion complete as per direction of
Engineer-in-Charge.
(Final coat to be done in 1 or 2 layers without gap of time.)

MATERIAL
7241 Melamine Matt clear polish litre 1.5600
5766 Melamine wood sealer litre 2.8000
5767 Melamine solvent/thinner litre 2.8500
5768 Sanding cloth 150 mm wide metre 6.0000
5769 Sand papers of assorted gratings Nos 16.0000
5770 Melamine wood filler putty Kg 1.5000
5771 Dhoti (worm out soft cotton cloth) Nos 2.0000
LABOUR
0167 Polisher 1st class day 1.6600
0168 Polisher 2nd class day 3.2500
0114 Beldars/Coolies day 2.0000
0006 Hire charges of compressor machine spare gun etc., with day 1.2500
electric charges
9999 Sundries including scaffolding & T&P etc. L.S. 300.0000
5779 Grinding buffers day 2.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of

area 2.5 sq.meters and under, including cutting the patch in
proper shape, raking out joints and preparing and plastering
the surface of the walls complete, including disposal of
rubbish to the dumping ground, all complete as per direction
of Engineer-in-Charge.
14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand)

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.2 Fixing chowkhats in existing opening including embedding
chowkhats in floors or walls cutting masonry for holdfasts,
embedding hold fasts in cement concrete blocks of size 15 x
10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size),
painting two coats of approved wood preservative to sides of
chowkhats and making good the damages to walls and floors
as required complete, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-in-
Charge.
14.2.1 Door chowkhats

0128 Mate day 0.0012
9999 Cement concrete 1:2:4 filled in chase cut L.S. 24.1800
9999 Painting two coats of coal tar L.S. 13.5200
9999 Disposal of mulba L.S. 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
14.2.2 Window chowkhats

0128 Mate day 0.0008
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
14.2.3 Clerestory window chowkhats

0128 Mate day 0.0004
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
14.3 Fixing chowkhat in existing opening in brick/ RCC wall with

dash fasteners/Chemical fasteners of appropriate size (3 nos
on each vertical member of door chowkhat and 2 nos on each
vertical
member of window chowkhats), including Cost of dash
fasteners/ chemical fastener.

Details of cost for 1 chowkhat.
0128 Mate day 0.0012
7019 Dash fastener/ chemical fastener each 6.0000
9999 Hire charges of drill machine hire charges, Scaffolding and L.S. 12.2200
Sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
14.4 Making the opening in brick masonry including dismantling in
floor or walls by cutting masonry and making good the
damages to walls, flooring and jambs complete, to match
existing surface i/c disposal of mulba/ rubbish to the nearest
municipal dumping ground, all complete as per direction of
Engineer-in-Charge.
14.4.1 For door/ window/ clerestory window

Details of cost for one opening of size
0.90x2.10m = 1.89 sqm
Cement mortar 1:6 (1 cement: 6 fine sand)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.89sqm.
Cost of 1.00 sqm.
Say
14.5 Renewing glass panes, with putty and nails wherever

necessary including racking out the old putty:
14.5.1 Float glass panes of nominal thickness 4 mm (weight not less

than 10kg/sqm)
Detail of cost for 10 glasses area each 0.1sqm.
MATERIAL
2306 Float glass panes of nominal thickness 4 mm (weight not less sqm 1.1000
than 10kg/sqm)
1.00 sqm + 10% wastage + Total = 1.10 sqm
9988 Carriage including sundries L.S. 1.8200
0863 Putty for wood work kilogram 0.6800
9999 Painting or varnishing or bee waxing L.S. 5.3300
9999 Sundries Nails etc. L.S. 6.7600
9999 Sundries such as Rag, cotton etc L.S. 1.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm.
Cost of 1.00 sqm.
Say

than 12.5kg/sqm)
MATERIAL
than 12.5kg/sqm)
9988 Carriage including sundries L.S. 1.8200
9999 Painting or varnishing or bee waxing L.S. 5.3300
9999 Sundries such as Rag, cotton etc L.S. 1.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm.
Cost of 1.00 sqm.
Say
14.6 Renewing glass panes, with wooden fillets wherever

necessary:

than 10kg/sqm)
MATERIAL
2406 Float glass panes of nominal thickness 4 mm (weight not less 1.1000
than 10kg/sqm)
1196 First class kail wood in planks 10 cudm 0.0250
9999 Painting or varnishing or bee waxing 4.4200
9999 Sundries Nails etc. 2.7300
0112 Carpenter 2nd class 0.2000
0119 Glazier 0.2500
0114 Beldar 0.4500
Sundries such as Rag, cotton etc 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm.
Cost of 1.00 sqm.
Say

than 12.5kg/sqm)
MATERIAL
than 12.5kg/sqm)
1196 First class kail wood in planks 10 cudm 0.0250
9999 Painting or varnishing or bee waxing 4.4200
0112 Carpenter 2nd class 0.2000
0119 Glazier 0.2500
0114 Beldar 0.4500
Sundries such as Rag, cotton etc 1.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm.
Cost of 1.00 sqm.
Say
14.7 Renewing glass panes and refixing existing wooden fillets:
14.7.1
Float glass panes of nominal thickness 4 mm (weight not less
than 10kg/sqm)

MATERIAL
than 10kg/sqm)
9977 Carriage of glass panes and other materials 2.7300
9999 Methylated spirit 5.3300
0119 Glazier 0.3000
0114 Beldar 0.3000
9999 Sundries 1.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm.
Cost of 1.00 sqm.
Say

than 12.5kg/sqm)
MATERIAL
than 12.5kg/sqm)
1.00 sqm + 10% wastage= 1.10 Sqm
9977 Carriage of glass panes and other materials L.S. 2.7300
9999 Methylated spirit L.S. 5.3300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm
Say
14.8 Supplying and fixing new wooden fillets wherever necessary:
14.8.1 2nd class teak wood fillets

Details of cost for 10 metres length
MATERIAL
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
14.8.2 Hollock wood fillets

MATERIAL
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
14.9 Renewal of old putty of glass panes (length)

MATERIAL
9999 Nails L.S. 7.1500
9999 Spirit L.S. 2.7300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 metre
Say
14.1 Refixing old glass panes with putty and nails

9999 Spirit L.S. 2.7300
9999 Nails L.S. 7.1500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add 15 % Contractor's profit and overheads
Cost of 1.00 sqm
Say
14.11 Fixing old glass panes with wooden fillets (excluding cost of
fillets)
LABOUR
9999 Nails L.S. 3.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm
Say
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard

shape and size in existing R.C.C. slab, including cutting chase,
anchoring clamp to reinforcement bar, including cleaning,
refilling, making good the chase with matching concrete,
plastering and painting the exposed portion of
the clamps complete.

Details of cost for each fan clamp.
MATERIAL
M.S.bar 16mm dia = 40cm
(including wastage) @ 1.58kg/m = 0.632 kg
9999 Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded L.S. 13.5200
stone aggregate 20mm nominal size) mortar for rendering or
plastering
9999 Painting two or more coats to exposed portion of the clamp L.S. 7.1500
including priming coat
Labour for fixing
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
14.13 Regrading terracing of mud phaska covered with tiles or brick,

in cement mortar by dismantling tiles or bricks, removing mud
plaster, preparing the surface of mud phaska to proper slope,
relaying mud plaster gobri leaping and tiles or bricks, grouted
in cement mortar 1:3 (1 cement : 3 fine sand), including
replacing unserviceable tiles or bricks with new ones and
disposal of unserviceable material to the dumping ground (the
cost of the new tiles or brick excluded), all complete as per
direction of Engineer-in-Charge.

(i) Dismantling tiles/bricks in cement mortar including

removing mud plaster and cleaning the tiles/bricks
LABOUR
(ii) Preparing the surface, for mud phuska to proper slope,
relaying mud plaster gobri leeping.
25mm thick mud plaster including gobri leaping
MATERIAL
Gobri mortar
LABOUR
(iii) relaying tiles/bricks including Cement mortar 1:3 (1
Cement : 3 fine sand) for grouting
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.14 Replacing sand stone slabs in roofing, laid in cement mortar

1:4 (1 cement : 4 coarse sand), including necessary repairs
and cement pointing with same mortar complete, including
disposal of rubbish to dumping ground, all complete as per
14.14.1 Red/ white sand stone slabs 30 to 50 mm thick

Dismantling existing stone, slabs roofing
1x10 sqm x 0.05m = 0.50 cum.
9999 Cleaning the surface including necessary repairs L.S. 40.4300
1174 Red sand stone slab 45 mm and 50 mm thick (un- dressed) sqm 11.0000
slab
9999 Sundries L.S. 16.1200
2264 Carriage of Rubbish cum 0.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.15 Renewing wooden battens in roofs, including making good the

holes in wall and painting with oil type wood preservative of
approved brand and manufacture complete, including
removal of rubbish to the dumping ground, all complete as
14.15.1 Sal wood battens

Details of cost for 10 battens i.e. 300 cudm
3 metres long of 100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm,
Total = 306 cudm
MATERIAL
LABOUR
Taking out the existing battens and refixing new one including
supporting the roof
9999 Making good the holes including sundries L.S. 80.7300
9999 Brushes L.S. 5.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
14.16 Renewing wooden beams in roofs including making good the

holes in walls and painting with oil type wood preservative of
approved brand and manufacture complete, including
removal of rubbish to the dumping ground, all complete as
14.16.1 Not exceeding 4.00 metres in length.

14.16.1.1 Sal wood beams
Consider one beam i.e. 300 cudm.
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2%= (0.006 cum)
Total = = 0.306 cum =306 cudm
(i) Propping the roof
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0 metre long
5 nos.x1.0x0.1x0.1 =0.05cum = 50 cudm.
These materials can be used for 16 times
Hence qty for one operation 1/16 = 3.125 cudm
LABOUR
(ii) Taking out the existing beams etc.
LABOUR
(iii) Renewal
Materials and Labour
Painting with oil preservative
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1.00
litre/10sqm = 0.455 litre
9999 Brushes L.S. 1.8200
9999 Making good the holes L.S. 20.6700
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
14.16.1.2 Hollock wood beams

0.25 x 0.30m x 4.0m (long) = 0.30 cum
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm hollock wood battens 1.0 metre long
5 nos.x1.0x0.1x0.1 =0.05cum = 50 cudm.
LABOUR
LABOUR
(iii) Renewal
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1.00
9999 Brushes L.S. 1.8200
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
14.16.2 Above 4.00 metres and up to 5.00 metres length.
14.16.2.1 Sal wood beams

0.25 x 0.30m x 5.0m (long) = 0.375 cum
MATERIAL
100mm diameter ballies5 m long 12 nos.
100x100mm salwood battens 1.0 metre long
6 nos.x1.0x0.1x0.1 =0.06cum = 60 cudm.
LABOUR
LABOUR
(iii) Renewal
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1.00
9999 Brushes L.S. 2.2100
9999 Sundries L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
14.16.2.2 Hollock wood beams

0.25 x 0.30m x 5.0m (long) = 0.375 cum
MATERIAL
100mm diameter ballies5 m long 12 nos.
100x100mm Hollock wood battens 1.0 metre long
6 nos.x1.0x0.1x0.1 =0.06cum = 60 cudm.
LABOUR
LABOUR
(iii) Renewal
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1.00
9999 Brushes L.S. 2.2100
9999 Sundries L.S. 33.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
14.17 Raking out joints in lime or cement mortar and preparing the
surface for re-pointing or replastering, including disposal of
rubbish to the dumping ground, all complete as per direction

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine

sand) mixed with 2% of integral water proofing compound by
weight of cement for flat tile bricks on top of mud phaska :
14.18.1 With F.P.S. brick tiles

MATERIAL
Water proofing materials kilogram 0.1530
2% of wt. of cement
LABOUR
Coolie day 0.3600
Mason (brick layer) 2nd class day 0.3600
Bhisti day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.18.2 With modular brick tiles

MATERIAL
2% of wt. of cement
LABOUR
9999 Sundries L.S. 18.8500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.19 Taking out wind ties from roof including cutting out rusted
bolts, nuts etc. and removing materials to any distance within
compound and stacking.

Details of cost for 30 mtrs of weight 63 kgs
M.S. Flats 40x6mm @ 1.9kg./m =
30x1.9 = 57 kg. (A)
J' hook bolts @ 30cm centre to centre =
101 Nos. x 0.15 m = 15.15 m @ 0.40kg./ m = 6.06kg (B)
Total (A+B) = 63.06 kg Say 63 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 63 kg.
Cost of 1.00 kg
Say
14.2 Fixing of old wind tie with new fittings including painting two
or more coats with anticorrosive bitumastic paint of approved
brand & manufacturer over and including priming coat of
ready mixed zinc chromate yellow primer of approved brand.

Detail of cost for 20.2 m wind tie
MATERIAL
@ 30 cm center to center = 68 Nos
9977 Carriage of bolts, nuts and washers etc. L.S. 1.1700
LABOUR
9999 Sundries L.S. 13.9100
Applying priming coat with ready mixed zinc chromate yellow
primer
20.2x2x(0.04+0.006) = 1.86 sqm
Painting with ready mixed black anticorrosive bitumastic paint
13.65.1 Rate as per item No.13.65.1 SH: Finishing sqm 1.8600

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.2 metres
Cost of 1.00 metre
Say
14.21 Renewing bottom rail and/or top runner of collapsible gate
including making good all damages and applying priming coat
of zinc chromate yellow primer of approved brand and
manufacturer.

Detail of cost for gate of size 1.52x2.4 m
(weight 11.55 kg)
MATERIAL
M.S. Tee 40x40x6 mm
Top rail = 1.725 m
Bottom rail = 1.570 m
Total = 3.295 m say 3.30 m @ 3.5 kg/m
= 11.55 kg
Add 10% wastage = 1.155 kg
Total = 12.705 kg = 0.1270 q say 0.13 q
Taking out collapsible gate including frame
15.12.2 (Rate as per item no 15.12.2 of SH Dismantling and each 1.0000
Demolishing)
Refixing of collapsible gate including mending good the
damaged floor, wall etc.frame
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
3.6 Cement mortar 1 : 6 (1 cement : 6 fine sand) (Rate as per item cum 0.0100
No 3.6)
Priming coat on Tees 0.16x3.3 = 0.53 sqm
LABOUR
Labour for fixing the gate
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 11.55 kg
Cost of 1.00 kg
Say
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door
or gate and fitting and fixing the same with necessary clamps,
nuts and bolts/welding and erection etc. complete
14.22.1 Wheel 50 mm dia and below

Detail of cost for 10 nos wheels of 40 mm dia.
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000= 3.94 kg
Weight of 10 nos clamps 6 mm thick =
10 x length of clamp = 10 x 0.17 m = 1.70 m @ 1.90kg/m
=3.23 kg
Weight of 10 nos 10 mm dia. Bolts, 10 cm long
10 x 0.10m = 1m @ 0.60 kg/m = 0.60 kg.
Total = 7.70 kg say 8 kg
Labour for dismantling :
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide each 10.0000
10 nos clamps out of M.S. flat 40x6 mm, 170 mm long
= 10x0.17m = 1.70m @ 1.9 kg/m = 3.23 kg
Total = 3.39 kg say 3.50 kg
M.S. bolt/pin 10 mm dia 10 cm long 10 Nos
10x0.06 = 0.6 kg = 0.006 q
length = 10x(2x4) = 80cm
LABOUR
Labour for cutting, assembling and errection charges
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqm
on Tees 0.16x3.3 = 0.53 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos wheels
Cost per wheel
Say
14.22.2 Wheel above 50 mm dia

Detail of cost for 10 nos wheels
Considering average wheel dia =75 mm
Width of wheel = 40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Length of one clamp :
2x(0.04+0.0375+0.02)+0.05 =0.195+0.05=0.245m say 0.25m
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000= 13.87 kg
Weight of 10 nos clamps 8 mm thick =10x0.25 m @ 3.8kg/m =
9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm long
10x0.10 m @ 1.60 kg/m = 1.60 kg
Labour for dismantling :
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide each 10.0000
10 nos clamps out of M.S. flat 60x8 mm = 10x0.25 m @ 3.8
kg/m = 9.5 kg
M.S. bolt/pin 16 mm dia 10 cm long 10 Nos
10x0.16= 1.6 kg = 0.016 q
length = 10x(2x6)
LABOUR
Labour for cutting, assembling and errection charges
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqm
on Tees 0.16x3.3 = 0.53 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos wheels
Cost per wheel
Say
14.23 Pumping out water caused by springs, tidal or river seepage,

broken water mains or drains and the like.
Details for 10.91 kilolitre
Pumping hours 3 hrs. or 0.375 days

for clearing slush
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.91 kilolitre
Cost per wheel
Say
14.24 Mud mortar made with local clay good earth.

Detail of cost for 1 cum
MATERIAL
0811 Mud (dry) cum 1.0800
LABOUR
TOTAL
Cost of 1 cum
Say
14.25 Brick work with common burnt clay bricks of class designation
7.5 in mud mortar
MATERIAL
designation 7.5
Mud mortar
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Cost of 1.00 cum
Say
14.26 Providing and fixing 25 mm thick shutters for cup board

etc. :
14.26.1 Panelled or panelled & glazed shutters :
14.26.1.1 including nickel plated bright finished M.S. piano
hinges with necessary screws.
Details of cost for shutter of cup-board 200x108cm = 2.16
sqm.
MATERIAL
Superior class teak wood
Styles 4x200x8.0x2.5cm = 0.016 cum+
Rails - Top rail 1x110.5x8.0x2.5cm = 0.0022cum+
Lock & bottom rails 2x110.5x8.0x2.5 cm= 0.0044 cum
Panels 2x48x41x1.6cm = 0.006cum+
Sash bars - 2x114x3.8x2.5cm = 0.0022cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading 16x92x1.4x1.2cm = 0.002cum
Total = 0.0358 cum
Add for wastage@ 10% = 0.00336 cum.
Grand Total= 0.0394 cum= 39.40 cudm
say 39 cudm
1186 Superior class teak wood such as Dandeli, Balarshah or 10 cudm 3.9000
Malabar in planks
than 10kg/sqm).
Fittings-
0639 Bright finished or black enamelled mild steel screws 25mm 100 Nos 1.2000
LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.1.2 including nickel plated bright finished M.S. piano hinges with
necessary screws.
sqm.
MATERIAL
Ist class teak wood
Rails - Top rail 1x110.5x8.0x2.5cm = 0.0022cum+
Lock & bottom rails 2x110.5x8.0x2.5 cm= 0.0044 cum
Panels 2x48x41x1.6cm = 0.006cum+
Sash bars - 2x114x3.8x2.5cm = 0.0022cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading 16x92x1.4x1.2cm = 0.002cum
Total = 0.0358 cum
Add for wastage@ 10% = 0.00336 cum.
Grand Total= 0.0394 cum= 39.40 cudm
say 39 cudm
1188 First class teak wood in planks 10 cudm 3.9000
than 10kg/sqm).
Fittings-
LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.2 Glazed shutters :
14.26.2.1 Superior class teak wood including nickel plated bright

finished M.S. piano hinges with necessary screws.
sqm.
MATERIAL
Superior class teak wood
Rails - Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.005 cum
Lock & bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beading
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum
1186 Superior class teak wood such as Dandeli,Balarshah or 10 cudm 4.2000
Malabar in planks
than 10kg/sqm).
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.2.2 including nickel plated bright finished M.S. piano hinges with
necessary screws.
sqm.
MATERIAL
Ist class teak wood
Rails - Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.005 cum
Lock & bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beading
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum
1188 Ist class teak wood in planks 10 cudm 4.2000
than 10kg/sqm).
hinges50x37x1.50 mm

LABOUR
9999 Sundries L.S. 40.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.27 Providing and fixing plain jaffri door and window shutters
including bright or/and black enamelled M.S. butt hinges with
necessary screws 35x10 mm laths placed 35 mm apart
(frames to be paid separately), including fixing 50x12 mm
beading complete with :

details of cost of a jaffri shutter 176x86 cm = 1.51 sqm
MATERIALS
Teak wood 2nd class
Styles 2x176x7.5x3.5 cm = 0.0092 cum
Rails 3x86x7.5x3.5 = 0.0068 cum
Total 0.0160 cum
Add wastage @ 10 % =0.0016 cum
Total = 0.0176 cum Say 18 cudm
Plain Jaffri work
9.41.1 Rate as per Item Number 9.41.1 of SH:Wood and PVC work sqm 1.5100
100x58x1.90 mm
hinges50x37x1.50 mm
LABOUR
For making frame and fixing fitting
TOTAL
TOTAL
TOTAL
TOTAL
dd Cess @ 1% on "Z-A"
Cost of 1.51 sqm.
Cost of 1 sqm.
Say
14.28 Providing and fixing brass curtain rods of wall thickness 1.25
mm with two brass brackets fixed with brass screws and
wooden plugs etc. wherever necessary complete.
14.28.1 20 mm diameter.
Detail of cost for 2 metre long
MATERIAL
0444 Brass curtain rod 20 mm dia 1.25 mm thick metre 2.0000
0446 Brass brackets (curtain rods) 20 mm each 2.0000
9999 Screws L.S 2.7300
9977 Carriage L.S 1.5600
Wooden plugs including cutting brick work and fixing in
cement mortar
9.32 Rate as per item no 9.32 of SH : Wood work each 2.0000
9999 LABOUR L.S 2.7300
9999 Sundries L.S 1.5600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.00 metres
Cost of 1 metre
Say
14.28.2 25 mm diameter.
Detail of cost for 2 metre long
MATERIAL
0444 Brass curtain rod 25 mm dia 1.25 mm thick metre 2.0000
0446 Brass brackets (curtain rods) 20 mm each 2.0000
9999 Screws L.S 2.7300
Wooden plugs including cutting brick work and fixing in
cement mortar
9.32 Rate as per item no 9.32 of SH : Wood work each 2.0000
9999 LABOUR L.S 2.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.00 metres
Cost of 1 metre
Say
14.29 Providing and fixing M.S. round or square bars with M.S. flats
at required spacing in wooden frames of windows and
clerestory windows.

Details of cost for window -140x110cm
MATERIAL
M.S. bar 16 mm dia
13x136 cm = 17.68 m @ 1.58 kg/m = 27.93 kg
Add for wastage @ 10% =2.79 kg
Total = 30.72 kg or 0.307 q
M.S. flat 40x6mm
2x96cm = 192cm+
1x110cm = 110cm
= 302cm+
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg Say 0.063 q
2205 Carriage of Steel
(0.307+0.063 = 0.37 q = 0.037 t) tonne 0.0370
9999 Sundries L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 33.67 kg.(5.74+27.93=33.67kg)
Cost of 1 kg
Say
14.3 Providing joists (karries) including hoisting, fixing in position

and applying wood preservative on unexposed surface etc.
complete with :
14.30.1 Sal wood

Details of cost for 300cudm.
MATERIAL
Sal wood
10x0.1mx0.1mx3.0m = 0.30 cum. Or = 300 cudm
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
LABOUR
Priming coat (Wood preservative)
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 cudm
Cost of 1 cum
Say
14.30.2 Hollock wood

Details of cost for 300cudm.
MATERIAL
Hollock wood
10x0.1mx0.1mx3.0m = 0.30 cum. Or = 300 cudm
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
LABOUR
Priming coat (Wood preservative)
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 cudm
Cost of 1 cum
Say
14.31 Providing and fixing bright finished brass single acting spring
hinges with necessary brass screws etc. complete :
14.31.1 150 mm
MATERIAL
0389 Brass single acting spring hinges 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.31.2 125 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.31.3 100 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.32 Providing and fixing bright finished brass double acting spring
hinges with necessary brass screws etc. complete :
14.32.1 150 mm
MATERIAL
0392 Brass double acting spring hinges 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.32.2 125 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.32.3 100 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.33 :Providing and fixing bright finished brass flush bolts with
necessary brass screws etc. complete
14.33.1 250 mm
MATERIAL
0404 Brass flush bolt 250 mm each 10.0000
LABOUR
0111 Carpenter 1st class Day 0.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.33.2 150 mm
MATERIAL
0405 Brass flush bolt 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.33.3 100 mm
0406 Details of cost for 10 nos. MATERIAL each 10.0000
Brass flush bolt 100 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hinges
Cost of each
Say
14.34 Providing and fixing 150 mm bright finished floor brass door
stopper with rubber cushion, necessary brass screws etc. to
suit shutter thickness complete

MATERIAL
0417 Brass 150 mm floor door stopper (0.357kg) each 10.0000
LABOUR
9999 Sundries (wooden plugs including fixing
in the floor) L.S. 6.3700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35 Providing and fixing bright finished brass hard drawn hooks
and eyes :
14.35.1 300 mm
MATERIAL
0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.2 250 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 hooks and eyes
Cost of 1 hook and eye
Say
14.35.3 200 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.4 150 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.5 100 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.36 Providing and fixing bright finished brass fan light pivot with
necessary brass screws etc. complete.
MATERIAL
0429 Brass fanlight pivot 10 Nos 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.37 Providing and fixing 300 mm long bright finished brass chain
with hook for fan light including necessary brass screws etc.
complete.

MATERIAL
0430 Brass chain with hook for fan light catch each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.38 Providing and fixing bright finished brass quadrant stay 300
mm long with necessary brass screws etc. complete.

MATERIAL
0427 Brass quadrant stays 300 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 quadrant stays
Cost of each
Say
14.39 Providing and fixing bright finished brass helical door spring
(superior quality).
MATERIAL
0442 Brass helical spring 150 mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
14.4 Providing and fixing chromium plated brass butt hinges with
necessary chromium plated brass screws etc. complete.

MATERIAL
0525 Chromium plated Brass butt hinges (light/ordinary) type 10 Nos 1.0000
125x70x4 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say

MATERIAL
100x70x4 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say
14.40.3 75x65x4 mm (heavy type)

MATERIAL
0524 Chromium plated Brass butt hinges (heavy) type 75x65x4 .0 10 Nos 1.0000
mm (200gms)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say

MATERIAL
75x40x2.5 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say

MATERIAL
50x40x2.5 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say
14.41 Providing and fixing 85x42 mm chromium plated brass pull

bolt lock with necessary chromium plated brass screws, nuts,
bolts and washers etc. complete.

MATERIAL
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 each 10.0000
mmx42 mm with screws,bolts,nuts and washers complete

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos.
Cost of each
Say
14.72 Providing and fixing double scaffolding system (cup lock type)
on the exterior side, up to seven story height made with 40
mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical
tubes joining with cup & lock system with M.S. tubes, M.S.
tube challies, M.S. clamps and M.S. staircase system in the
scaffolding for working platform etc. and maintaining it in a
serviceable condition for the required duration as approved
and removing it there after .
The scaffolding system shall be stiffened with bracings,

runners, connection with the building etc wherever required
for inspection of work at required locations with essential
safety features for the workmen etc. complete as per
directions and approval of Engineer-in-charge .The elevational
area of the scaffolding shall be measured for payment
purpose .The payment will be made once irrespective of
duration of scaffolding.
Note: - This item to be used for maintenance work judicially,
necessary deduction for scaffolding in the existing item to be
done.

Details of cost for area 22.5m x 9.0m =202.5 sqm
14.72X Rate as per Item No.14.72X of SH:Repairs to Buildings each 1.0000
40mm dia MS pipe = 3765.42 kg
25mm spigot = 123.98 kg
Nuts & bolts = 37.80 kg
Clamp = 120 nos @ 1.00kg each = 120.00 kg
Challies = 90 nos @ 15.00kg each = 1350.00 kg
Cup locks = 1314 nos @ 0.50kg each = 657.00 kg
Total = 6054.20 kg = 6.054 tonne
LABOUR
0114 Beldar day 31.0000
9999 Sundries L.S. 1035.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 202.50 sqm.
Cost of 1 sqm.
Say
14.72X Scaffolding
Details of cost for area 22.5 x 9.0= 202.50 sqm
MATERIAL
use of 40 times
7397 Base jack each 14.0000
7x2=14 nos
40mm dia M.S. Tube
Vertical standard 2.5m length
= 7x2x9x2.5 = 315.00 m
Bracing ledder 1.5m length = 7x2x9x4.0873 = 513.00 m
Side support 6.00m length = 3x2x6.00= 36.00 m
Horizontal support 3.00m length = 18x3x3.00 = 162.00 m
Total = 1026.00m @ 3.67 kg/m = 3765.42 kg
7387 Spigot for standard jointing kilogram 123.9800
7x2x9 = 126 nos x 0.40m length = 50.40m
50.40m @ 2.46kg/m = 123.98kg
1034 Bolts and nuts upto 300 mm in length quintal 0.3780
2x7x2x9 = 252 nos @ 0.15 kg each
= 37.80 kg = 0.378 q
7346 Double coupler each 120.0000
2x3x2 + 2x18x3 = 120 nos
7398 Challies each 90.0000
3 nos x 18 lines = 54 nos
Two level plate challies = 2x 18 lines = 36 nos,
Total = 90 nos
7399 Cup lock each 1314.0000
Vertical standards 5x7x2x9 = 630.00 Nos.
2x18x19 = 684 Nos.
Total =1314 Nos.
TOTAL
Add 10% for maintenance on P
Less 25% salvage value on P
TOTAL (P+Q+R)
Considering that scaffolding shall be unserviceable after using
40 times
cost of using once
Say
14.73 Providing and fixing bright finished brass casement window

fasteners or peg stays to windows/ ventilators with necessary
welding and machine screws etc. complete.

Details of cost for 10 nos (10 x 0.20 = 2.00 kg)
MATERIAL
0423 Brass casement window fastener each 10.0000
9999 Fixing charges including welding and materials etc. L.S. 125.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.00kg window fasteners
Cost of 1 kg window fastener
Say
14.74 Providing and fixing 14 mm bright finished brass spring catch

to steel centre hung ventilators with necessary welding and
machine screws etc. complete.
Details of cost for 10 nos
MATERIAL
0426 Brass fanlight catch 10 Nos 1.0000
9999 Fixing charges including welding and materials etc. L.S. 125.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 window fasteners
Cost of each
Say
14.75 Repair to plaster of thickness 12mm to 20 mm in patches of

area 2.5 sqm and under, including cutting the patch in proper
shape, raking out joints and preparing plastering the wall
surface with white cement based polymer modified self curing
mortar, including disposal of rubbish, all
complete as per the direction of Engineer-In-Charge.

MATERIAL
0722 White cement based polymer modified self curing compound kilogram 125.0000
in powder form
i/c 2% wastage
9977 Carriage of white cement based polymer modified self curing L.S. 21.1000
compound in powder form
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of1.00 sqm
Say
14.75A Cleaning of terrace/loft water storage tank (inside surface

area) up to 2000 litre capacity at all heights with coconut
brushes, duster etc., removal of silt, rubbish from the tank
and cleaning the tank with fresh water disinfecting with
bleaching powder @ 0.5gm per litre capacity of tank including
marking the date of cleaning on the side of tank body with the
help of stencil and paint and disposing of malba all complete
as per direction of Engineer-in-Charge. (The old date already
written on tank should be removed with paint remover or
black paint and if date is not written with the stencil or old
date is not removed deduction will be made @ Rs. 0.10 per
litre) (if during cleaning any GI fittings or ball cock is damaged
that is to be repaired by contractor at his
own cost and nothing extra will be paid on this account)

Details of cost for 10 tanks
1 tank is of 500 litres capacity i.e. 5000 litres MATERIAL
1301 Bleaching powder quintal 0.0250
(assuming 0.040m depth of silt)
9999 Marking with paint i/c removal of existing markings LABOUR L.S. 30.0000

for opening ball cock wheel valve and other fittings
for cleaning disinfecting etc
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5000 litres
Cost of 1.00 litres
Say
14.76 Cleaning and desilting of gully trap chamber, including

removal of rubbish mixed with earth etc. and disposal of
same, all as per the direction of Engineer-in-charge.

LABOUR
0128 Sewer man day 1.0000
9999 T & P Bamboo, bucket, wheel barrow etc. L.S. 11.2000
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of each
Say
14.77 Cleaning of chocked sewer line by diesel running vehicle

mounting hydraulic operated high pressure suction cum
jetting sewer cleaning machine fitted with pump having 4000
litres suction capacity and 6000 litres water jetting tank
capacity including skilled operator, supervising engineer etc.
for cleaning and partial desilting of manholes and dechocking
of sewer lines. Dechocking and flushing of sewer line from
one manhole to another by high pressure jetting
system of 2200 PSI for sewer line from 150mm dia up to
300mm

Details of Cost for 208 metres
MATERIAL
9999 Soap, brush, cloths & sundries L.S. 345.0000
8500 Water for jetting / blowback Machineries 1000 litre 0.0020
0087 Hire Charges of Suction Jetting machine 2200 PSI machine day 1.0000
i/c POL and operator

LABOUR
0160 Technician day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 208 metres
Cost of 1.00 metre
Say
14.78 Cleaning of under ground sump, Over Head R.C.C. Tank
( independent staging) including disposal of slit and rubbish,
all as per direction of Engineer-in-Charge. The cleaning shall
consist following operations:-
(i)Tank shall be emptied of water by pumping & bottom shall
be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed
thoroughly with wire brush etc. and pressure washed with
water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all
loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet
radiation etc. as per direction of Engineer- in-Charge.
Let a underground tank of capacity 272000 litre or 272 KL and

area of tank is 570sqm
(a) Dewater and slit cleaning
Considering through pumping 20% of water to be lifted, water
discharge =(272 x 20/100=54.40KL)
Cost of pumping water with pump of capacity 4000 litres per
hours , = (54.4/4 =13.6 hours = @ 8 hours/ day = 1.7 day)
0011 Hire charges of Pump set of capacity 4000 litres/hour day 1.7000
0114 Beldar day 10.8800
(b) Scrubbing the internal surface of tank
9999 Sundries L.S. 142.5000
(c) Bleaching
0006 Hire charges of Spraying machine dayy 14.2500
including electric charges
0138 Sprayer (for bitumen, tar etc.) day 14.2500
(d) Air jetting
0058 Air compressor day 2.0000
(e) Ultra Violet Radiation
0085 Using cost of Ultra Violet Radiation tube hour 0.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 570 sqm
Cost of 1.00 sqm
Say
14.79 Disconnecting damaged overhead/terrace PVC water storage

tank of any size from water supply line and removing from the
terrace including shifting at ground level as per direction of
Engineer-
in-charge.

Details of cost for 1 No
LABOUR
For disconnecting & dismantling of existing W/s line of water
storage tanks on terrace of Qtrs.
For Bringing the tank at Ground Level
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for each
Cost for each
Say
14.8 Providing & fixing White vitreous china water closet squatting
pan (Indian type) along with "S" or "P" trap including
dismantling of old WC seat and "S" or "P" trap at site
complete with all operations including all necessary materials,
labour and disposal of dismantled material i/c malba, all
complete as per the direction of Engineer-in charge.
14.80.1 Long pattern W.C Pan of size 580x440 mm

Details of cost for 1 no. MATERIAL
1953 Vitreous china Indian type W.C. pan size 580 mm each 1.0000
1870 Vitreous china foot rests 250x125x25 mm pair 1.0000
1890 Centrifugally sand cast (spun) S&S "P" or "S" trap each 1.0000
9999 Cement sand & grit etc. L.S. 13.3600
Less for
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg.) kilogram -2.0000
LABOUR
(a) For dismantling WC seat and P or S trap
(b) For Fixing WC seat and "P" or "S" trap
0126 Mason 1st class day 0.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for each
Cost for each
Say
14.80.2 Orissa pattern W.C Pan of size 580x440 mm

Details of cost for 1 no. MATERIAL
1954 vitreous china orrisa type W.C. pan size 580 mm each 1.0000
1890 Centrifugally sand cast (spun) S&S "P" or "S" trap each 1.0000
9999 Cement sand & grit etc. L.S. 13.3600
Less for
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg.) kilogram -2.0000
LABOUR
(a) For dismantling WC seat and P or S trap
(b) For Fixing WC seat and "P" or "S" trap
0126 Mason 1st class day 0.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for each
Cost for each
Say
14.81 Cutting holes of required size in brick masonry wall for fixing
of exhaust fan including providing and fixing 300 mm dia PVC
pipe conforming BIS-12818 and making good the same etc.
complete
as per direction of Engineer-in-charge.

Detail of Cost for 10 holes
Size 0.30x0.30x0.23 m wall
MATERIAL
12 mm plaster 1:4 (1 Cement: 4 Coarse sand)
Actual Area (10x4x0.3x0.23) = 0.296 + 0.24
L.S. For corners/sides = 3.00 Sqm
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 0.2500
LABOUR
Proportionate labour taken as actually required at site
(0.16/0.0306)= 0.11 Nos.
(0.16/0.030)x0.207 = 0.11 Nos.
(1.25x0.207)/0.0306 =1.10 Nos.
9999 Add L.S. For Delay L.S. 16.1200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 holes
Cost for each
Say
14.82 Dismantling W.C. Pan of all sizes including disposal of

dismantled materials i/c malba all complete as per directions

Details of cost for 1.No
LABOUR
0114 Beldar day L.S. 0.1250
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for each
Cost for each
Say
14.83 Hacking of CC flooring including cleaning for surface etc.

complete as per direction of the Engineer-in-Charge.

LABOUR
0114 Beldar day L.S. 0.0300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of

dismantled pipes (within 50 metres lead) as per direction of
Engineer-in-Charge.
(a) Internal Work- Exposed on wall

LABOUR
9999 Dismantling of G.I. Pipe and stacking etc. L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
14.85 Taking out existing wooden door shutter, repair by cutting,

painting etc. and refixing of repaired door shutters to existing
door frames, including replacement of hinges with screws,
etc. as required, all complete as per the direction of the
Engineer-in-charge.

0637 Details of cost for one shutter (2.2 sqm) 100 Nos 0.2400
Normal exiting size of shutter 1.00x2.02m =2.02sqm
MATERIAL
Bright finished or black enamelled mild steel screws 40 mm
Assuming old hinges fixed in Tee iron frames
Half qty = 48/2=24 needs replacement
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.2 sqm or each shutter
Cost for 2.02 sqm or each shutter
Say
14.86 Providing and laying in situ seven course water proofing

treatment with APP (Atactic polypropylene) modified
Polymeric membrane over roof consisting of first coat of
bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses
of bonding material @ 1.20 Kg/sqm, which shall consist of
blown type bitumen of grade 85/25 conforming to IS : 702,
3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight
consisting of five layers
prefabricated with centre core as 20 micron HMHDPE film
sandwiched on both sides with polymeric mix and the
polymeric mix is protected on both side with 20 micron
HMHDPE film. 7th, the top most layer shall be finished with
brick tiles of class designation 10 grouted with cement mortar
1:3 (1cement : 3 fine sand) mixed with 2% integral water
proofing compound by weight of cement over a 12 mm layer
of cement mortar 1:3 (1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately).

MATERIAL
APP modified polymeric felt (two layers) 1.5 mm thick
Polymeric felt = 2x30 = 60 sqm +
Add 10% wastage = 6 sqm.
Total = 66 sqm
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm 66.0000

0.4x30 = 12
approved quality
3x36 =108 kg = 0.108 tonne
9977 Carriage of polymeric felt L.S. 7.8000
9999 Preparing roof surface, cutting grooves and making good the L.S. 134.5500
same
LABOUR
9999 Sundries, brushes etc L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.87 Providing and laying in situ five course water proofing
treatment with APP (Atactic Polypropylene) modified
bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of
bonding material @ 1.20 kg/sqm, which shall consist of blown
type bitumen of grade 85/25 conforming to IS : 702, 3rd layer
of roofing membrane APP modified Polymeric membrane 2.0
mm thick of 3.00 Kg/ sqm weight consisting of five layers .

1:3 (1 cement : 3 fine sand) mixed with 2% integral water
of cement mortar 1:3 (1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately)

MATERIAL
Polymeric felt = 3 0 sqm +
Total = 33 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm 33.0000
0.4x30 = 12
approved quality
1.20x30x2 =72 kg = 0.072 tonne
same
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.88 Providing and laying in situ seven course water proofing

treatment with APP (Atactic Polypropylene) modified
bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses
of bonding material @ 1.20 kg/sqm, which shall consist of
blown type bitumen of grade 85/25 conforming to IS : 702,
3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight
consisting of five layers

1:3 (1 cement : 3 fine sand) mixed with 2% integral water
of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately).

MATERIAL
Polymeric felt = 2x30 = 60 sqm +
Total = 66 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm 66.0000
0.4x30 = 12
approved quality
3course x 36 = 108 kg = 0.108 tonne
same
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.89 Providing and fixing APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 2 mm thick water proofing
membrane, black finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 litre/sqm by the same membrane manufacture of
density at 25°C, 0.87 - 0.89 kg/ litre and viscosity 70 - 160 cps.
Over the primer coat the layer of membrane shall be laid
using Butane torch and sealing all joints etc., and preparing
the surface complete.
The vital physical and chemical parameters of the membrane

shall be as under : Joint strength in longitudinal and
transverse direction at 23°C as 350/300 N/ 5 cm. Tear
strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150°C. Cold
flexibility shall be up to -2°C when tested in accordance with
ASTM, D - 5147. The laying of membrane shall be got done
through the authorised applicator of the manufacture of
membrane.
14.89.1 2mm (for corrugated roof sheets)

MATERIAL
A.P.P. modified 2 mm thick = 30 sqm
Add 10% for wastage - 3 sqm
Total= 33 sqm
8203 A.P.P. modified 2 mm thick membrane reinforced with glass sqm 33.0000
fibre matt
8206 Bitumen primer for bitumen membrane litre 12.0000
9977 Carriage of bitumen membrane L.S. 7.8000
1241 Commercial LPG in cylinder kg 7.0000
9999 Preparing roof surface, cutting grooves L.S. 49.5300
LABOUR
0159 Skilled torch operator for laying tack day 2.1600
9999 Sundries, brushes, bitumen torch etc L.S. 23.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.9 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 3 mm thick water proofing
membrane, black finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 litre/sqm by the same membrane manufactured of
density at 25°C, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps.
Over the primer coat the layer of membrane shall be laid
using butane torch and sealing all joints etc., and preparing
the surface complete.

transverse direction at 23°C as 350/300 N/5 cm. Tear strength
in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150°C. Cold flexibility shall
be up to -2°C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the
authorised applicator of the manufacturer of membrane :
3 mm thick
MATERIAL
Total = 33 sqm
8204 A.P.P. modified 3 mm thick membrane reinforced with glass sqm 33.0000
fibre matt
8206 Bitumen primer for bitumen membrane litres 12.0000
1241 Commercial LPG in cylinder kilugram 7.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.91 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 3 mm thick water proofing
membrane, black finished reinforced with non-woven
polyester matt consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 litre/sqm by the same membrane
manufacture of density at 25°C, 0.87-0.89 kg/ litre and
viscosity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all
joints etc, and preparing the surface complete.

transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength
in longitudinal and transverse direction as 300/250N.
Softening point of membrane not less than 150°C. Cold
flexibility shall be up to -2°C when tested in accordance with
ASTM, D - 5147. The laying of membrane shall be got done
through the authorised applicator of the manufacturer of
membrane :
14.91.1 3 mm thick
MATERIAL
Total = 33 sqm
8205 A.P.P. modified 3 mm thick membrane reinforced with sqm 33.0000
polyester matt
8206 Bitumen primer for bitumen membrane litres 12.0000
Fuel
1241 Commercial LPG in cylinder kilugram 7.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.92 Extra for covering top of membrane with Geotextile, 120 gsm
non woven, 100% polyester of thickness 1 to 1.25 mm bonded
to the membrane with intermittent touch by heating the
membrane by Butane Torch as per manufactures
recommendation.

MATERIAL
Geotextile 120 gsm membrane - 30 sqm
Add 5% for wastage - 1.50 sqm
Total= 31.50 sqm
8207 Geotextile 120 gsm membrane sqm 31.5000
9977 Carriage of Geotextile L.S. 7.8000
LABOUR
0159 Skilled torch operator for laying tack or fitter day 0.4300
2.16 / 5 = 0.43
0.18 / 5 = 0.04
3.24-5 / 0.65
9999 Sundries, torch, LPG etc L.S. 46.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.93 Providing round the clock security guard without gun for
watch & ward of Government premises and its all belongings
by deploying neatly dressed security guards in 8 hour's shift
including necessary T&P like torch, lathi and uniform
etc.complete,as per the direction of Engineer-in-
charge. (One job means 8 hour's duty).

Details of cost for 1 job (8hour's duty)
0164 Security guard (without gun) day 1.0000
9999 Lathi,torch,dress & other sundries L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Job
Cost of 1 Job
Say
14.94 Providing round the clock security guard with gun for watch &
ward of Government premises and its all belongings by
deploying neatly dressed security guards in 8 hour's shift
including necessary T&P like torch, lathi and uniform
etc.complete, as per the direction of Engineer-in-
charge. (One job means 8 hour's duty).

Details of cost for 1 job (8hour's duty)
0165 Security guard (with gun) day 1.0000
9999 Lathi,torch,dress & other sundries L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Job
Cost of 1 Job
Say
15.1 Demolishing lime concrete manually/ by mechanical means

and disposal of material within 50 metres lead as per direction
of Engineer- in-charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.2 Demolishing cement concrete manually/ by mechanical

means including disposal of material within 50 metres lead as
per direction of Engineer - in - charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design

mix)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design

mix)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.3 Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of unserviceable
material within 50 metres lead as per direction of Engineer -
in- charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.4 Demolishing R.B. work manually/ by mechanical means

including stacking of steel bars and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-
charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.5 Extra for cutting reinforcement bars manually/ by mechanical

means in R.C.C. or R.B. work (Payment shall be made on the
cross sectional area of R.C.C. or R.B. work) as per direction of
Engineer-in-charge.

R.C.C. or R.B. work Reinforced area considering 1%
reinforcement = 0.01sqm
LABOUR
For cutting 0.01 sqm reinforcement
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 sqm
Say
15.6 Extra for scrapping, cleaning and straightening reinforcement
from R.C.C. or R.B. work.
6 metres long 16 mm dia bars @ 1.58 kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 94.80 kg
Cost of 1.00 kg
Say
15.7 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction
15.7.1 In mud mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.7.2 In lime mortar with old mughal bricks

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.7.3 In lime mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.7.4 In cement mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.8 Removing mortar from bricks and cleaning bricks including

stacking within a lead of 50 m (stacks of cleaned bricks shall
be measured):
15.8.1 From brick work in mud mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1000 Nos
Say
15.8.2 From brick work in lime mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1000 Nos
Say
15.8.3 From brick work in cement mortar

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1000 Nos
Say
15.9 Demolishing stone rubble masonry manually/ by mechanical
means including stacking of serviceable material and disposal
of unserviceable material within 50 metres lead as per
direction of Engineer-in-charge :

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.1 Dismantling dressed stone work ashlar face stone work,

marble work or precast concrete work manually/ by
mechanical means including stacking of serviceable and
disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-charge :

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.11 Removing mortar from and cleaning stones and concrete

articles (net quantity of stacks of cleaned
materials will be measured):

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.12 Dismantling doors, windows and clerestory windows (steel or
wood) shutter including chowkhats, architrave, holdfasts etc.
complete and stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.12.2 Of area beyond 3 sq. metres

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.13 Taking out doors, windows and clerestory window shutters

(steel or wood) including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.13.2 Of area beyond 3 sq. metres

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.14 Dismantling wood work in frames, trusses, purlins and rafters

up to 10 metres span and 5 metres height including stacking
the material within 50 metres lead :
15.14.1 Of sectional area 40 square centimetres and above

LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.14.2 Of sectional area below 40 square centimetres

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.15 Extra for dismantling trusses, rafters, purlins etc. of wood

work for every additional span of one metre or part thereof
beyond 10 metres :

Detail of cost for 1cum for every additional span of 1 metre
LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum per metre span
Say

Detail of cost for 10 metre for every additional span of 1
metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre per metre span
Cost of 1.00 metre per metre span
Say
15.16 Extra for dismantling trusses, rafters, purlins etc. of wood

work for every additional height of one metre or part thereof
beyond 5 metres :

Detail of cost for 1 cum for every additional height of 1 metre
LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum per metre height
Say

Detail of cost for 10 metre for every additional height of 1
metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre per metre height
Cost of 1.00 metre per metre height
Say
15.17 Dismantling steel work in single sections including

dismembering and stacking within 50 metres lead in:
15.17.1 R.S. Joists

Detail of cost for 1 quintal
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.17.2 Channels, angles, tees and flats

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.18 Dismantling steel work in built up sections in angles, tees, flats

and channels including all gusset plates, bolts, nuts, cutting
rivets, welding etc. including dismembering and stacking
within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.19 Dismantling steel work manually/ by mechanical means in

built up sections without dismembering and stacking within
50 metres lead as per direction of Engineer-in-charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.2 Extra for dismantling trusses, rafters, purlins etc. of steel work
for every additional span of one metre or part thereof beyond
10 metres

Detail of cost for 1 quintal for every additional span of 1
metre beyond 10 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 quintal per metre span
Cost of 1.00 kg per metre span
Say
15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work
for every additional height of one metre or part thereof
beyond 5 metres.

Detail of cost for 1 quintal for every additional height of 1
metre beyond 5 metre
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 quintal per metre height
Cost of 1.00 kg per metre height
Say
15.22 Extra for marking of structural steel work required to be re-

erected.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.23 Dismantling tile work in floors and roofs laid in cement mortar
including stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.23.2 For thickness of tiles above 25 mm and up to 40 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.24 Demolishing dry brick pitching in floors, drains etc. including

stacking of serviceable material and disposal of unserviceable
material within 50 metres lead :

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.25 Dismantling stone slab flooring laid in cement mortar

unserviceable material within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.26 Demolishing brick tile covering in terracing including stacking

of serviceable material and disposal of unserviceable material

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.27 Demolishing mud phaska in terracing and disposal of material

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.28 Dismantling roofing including ridges, hips, valleys and gutters

etc., and stacking the material within 50 metres lead of:
15.28.1 G.S. Sheet

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.28.2 Asbestos Cement sheet

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.29 Dismantling stone slab roofing over wooden karries or R.C.C.
battens (dismantling karries and battens to be paid for
separately), including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Say
15.3 Dismantling jack arch roofing and floors including stacking of

serviceable material and disposal of unserviceable material

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.31 Dismantling tiled roofing with battens, boarding etc. complete

unserviceable material within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.32 Demolishing thatch roofing including mats, bamboo, jaffari

etc. complete including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.33 Dismantling wooden ballies in posts and struts including

stacking within 50metres lead.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50.00 metre
Cost of 1.00 metre
Say
15.34 Dismantling and stacking within 50 metres lead, fencing posts

or struts including all earth work and dismantling of concrete
etc. in base of:
15.34.1 T' or 'L' iron or pipe

LABOUR
9999 Excavation, transporting and stacking the posts to the L.S. 0.2600
required place within 50 metres lead, refilling the pit and
dressing the same
9999 Extra for lifting of R.C.C. posts being heavier than L iron and L.S. 13.3900
cleaning the posts of stacking concrete
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.34.2 R.C.C.
LABOUR
9999 Excavation, transporting and stacking the posts to the L.S. 13.3900
required place within 50 metres lead, refilling the pit and
dressing the same
9999 Extra for lifting of R.C.C. posts being heavier than L iron and L.S. 8.0600
cleaning the posts of stacking concrete
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.35 Cutting ballies or wooden posts of fencing at the point of

projection above the concrete or ground and stacking the
same within 50 metres lead.

Detail of cost for 1 ballie (post)
9999 Cutting L.S. 2.7300
9999 Transporting and stacking L.S. 1.4300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
15.36 Dismantling barbed wire or flexible wire rope in fencing

including making rolls and stacking within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 kg
Say
15.37 Dismantling wooden trellis work excluding frames but

including stacking the serviceable material within 50 metres
lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.38 Dismantling expanded metal or I.R.C. fabrics with necessary

battens and beading including stacking the serviceable
material within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.39 Dismantling wooden boardings in lining of walls and
partitions, excluding supporting members but including
stacking within 50 metres lead :
15.39.1 Up to 10 mm thick
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.39.2 Thickness above 10 mm up to 25 mm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.4 Dismantling precast concrete or stone slabs in walls, partition

walls etc. including stacking within 50 metres lead :
15.40.1 Thickness up to 40 mm
LABOUR
9999 Sundries L.S. 13.3900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

LABOUR
9999 Sundries L.S. 18.8500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.41 Dismantling cement asbestos or other hard board ceiling or

partition walls including stacking of serviceable materials and
disposal of unserviceable materials within 50 metres lead.

Detail of cost for 10 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
15.42 Dismantling C.I. or asbestos rain water pipe with fittings and
clamps including stacking the material within 50 metres lead :
15.42.1 75 to 80 mm dia pipe

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.42.2 100 mm dia pipe

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.42.3 150 mm dia pipe

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.43 Dismantling manually/ by mechanical means including
stacking of serviceable material and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-
charge :
15.43.1 Water bound macadam road

Consider a road 6 metres wide and 6 metres length wise
25 cm average depth = 9.00 cubic metre

LABOUR
For cutting road taking out soiling and metalling including
sorting and screening
9999 Labour for stacking of serviceable material and disposal of L.S. 89.7000
unserviceable material within 50 metres lead
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
15.43.2 bituminous road

Consider a road 6 metres wide and 6 metres length wise
30 cm average depth =10.80 cubic metre

LABOUR
For cutting road taking out soiling and metalling including
sorting and screening
9999 Labour for stacking of serviceable material and disposal of L.S. 107.6400
unserviceable material within 50 metres lead
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
15.44 Dismantling G.I. pipes (external work) including excavation

and refilling trenches after taking out the pipes, manually/ by
mechanical means including stacking of pipes within 50
metres lead as per direction of Engineer-in-charge :
15.44.1 15 mm to 40 mm nominal bore

LABOUR
Trenching and refilling etc
9999 Dismantling G.I. pipe and stacking etc L.S. 35.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.44.2 Above 40 mm nominal bore

LABOUR
Trenching and refilling etc
9999 Dismantling G.I. pipe and stacking etc L.S. 71.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.45 Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical
means breaking lead caulked joints, melting of lead and
making into blocks including stacking of pipes & lead at site
within 50 metre lead as per direction of Engineer-in- charge:
15.45.1 Up to 150 mm diameter

Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x0.55x0.75 m =16.61cum
Deduct for pipes of average 100 mm dia
=1x40.26x(22/7)/4x(0.118)x(0.118) =0.44cum
Total =16.17cum
LABOUR
2.8.1 Rate as per Item No.2.8.1 of SH: EARTH WORK cum 16.1700
0761 Fuel wood quintal 0.4600
9977 Carriage L.S. 53.8200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.45.2 Above 150 mm dia up to 300 mm dia

1x40.26x0.65x0.75 m =19.63cum
=1x40.26x(22/7)/4x(0.274)x(0.274) =2.37 cum
Total =17.26 cum
LABOUR
9977 Carriage L.S. 80.7300
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.45.3 Above 300 mm diameter

1x40.26x0.85x0.75 m =25.67 cum
=1x40.26x(22/7)/4x(0.480)x(0.480) = 7.29 cum
Total =18.38 cum
LABOUR
0114 Beldar day 11.5000
9977 Carriage L.S. 134.5500
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.46 Dismantling steel cylinder R.C. pipes including excavation and

refilling trenches after taking out the pipes, manually/ by
mechanical means breaking lead caulked joints, melting of
lead and making into blocks including stacking of pipes & lead
at site within 50 metres lead as per direction of Engineer- in-
charge :


1x40.26x1.30x1.65 m = 86.36 cum
=1x40.26x(22/7)/4x(0.480)x(0.480) = 7.29 cum
Total =79.07 cum
LABOUR
0114 Beldar day 11.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say

1x40.26x1.30x1.65 m = 86.36 cum
=1x40.26x(22/7)/4x1.00)x(1.00) = 31.63 cum
Total = 54.73 cum
LABOUR
0114 Beldar day 15.8200
0115 Coolie day 16.2500
0114 Beldar day 20.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.47 Dismantling asbestos cement pressure pipes including

excavation and refilling trenches after taking out the pipes
manually/ by mechanical means and stacking the pipes within
50 metres lead as per direction of Engineer-in-charge :


1x10.00x0.55x0.75 m = 4.125 cum
=1x10.00x(22/7)/4)x(0.118x0.118) = 0.109 cum
Total = 4.016 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say


1x10.00x0.65x0.75 m = 4.88 cum
=1x10.00x(22/7)/4)x(0.274x0.274) = 0.59 cum
Total = 4.29 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.48 Taking out C.I. cover with frame from R.C.C. top slab of
manholes of various sizes including demolishing of R.C.C. work
manually/ by mechanical means and stacking of useful
materials near the site and disposal of unserviceable materials
within 50 metres lead as per direction of Engineer- in-charge.
Details of cost for 1 man hole
Demolition of R.C.C. slab
1.3x1.2x0.15 m =0.234cum
Less cover 0.61x0.455x0.15 m =0.042cum
Net Quantity =0.192cum
LABOUR
9999 Removal of C.I. Cover with frame including stacking L.S. 1.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.49 Taking out C.I. cover with frame from R.C.C. top slab of
inspection chambers of various sizes including demolishing of
R.C.C. work manually/ by mechanical means and stacking of
useful materials near the site and disposal of unserviceable
materials within 50 metres lead as per direction of Engineer-
in-charge.

Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.1x0.9x0.15 m =0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
Total = 0.106cum Say 0.11cum
LABOUR
9999 Removal of C.I. Cover with frame including stacking L.S. 0.6500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.5 Dismantling of R.C.C. spun vent shaft including excavating the

cement concrete pit completely, taking out the shaft, refilling
the excavated gap, stacking the useful materials near the site
and disposal of unserviceable materials within 50 metres lead.

Dismantling cement concrete 1:4:8
0.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x0.450x0.450x1.10 m=0.175 cum
Total =0.919cum Say 0.92cum
0.90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m=0.024cum
Total=0.098cum Say 0.10cum
LABOUR
9999 Sundries for scaffolding etc L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.51 Dismantling of road gully chamber of various sizes including
C.I. grating with frame including stacking of useful materials
near the site and disposal of unserviceable materials within 50
metres lead including refilling the excavated gap.

Detail of cost for one chamber
Dismantling cement concrete a) 1:5:10
1.05x1.00x0.15m =0.16cum
Dismantling brick work in cement mortar 2.70x0.20x0.45m
=0.24cum
Dismantling cement concrete b) 1:2:4
2.70x0.20x0.15m =0.08cum
LABOUR
9999 Dismantling C.I. Grating L.S. 7.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous

China) including stacking of useful materials near the site and
disposal of unserviceable materials within 50 metres lead.

LABOUR
9999 Sundries L.S. 17.9400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.53 Dismantling of C.I. sluice valve including stacking of useful

materials within a lead of 50 metres

Detail of cost for dismantling 10 sluice valves (ave.) 100 mm
LABOUR
9999 Sundries for removing the R.C.C. cover etc for dismantling L.S. 89.7000
sluice valve
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say

Detail of cost for dismantling 10 sluice valves (ave.) 250 mm
LABOUR
9999 Sundries for removing the R.C.C. cover etc for dismantling L.S. 89.7000
sluice valve
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
15.54 Dismantling of spindle fire hydrant including stacking of useful

materials within 50 metres lead.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Nos
Cost of each
Say
15.55 Dismantling of cement concrete platform along with curtain

walls and base concrete etc. including stacking of useful
materials near the site and disposal of unserviceable materials
within 50 metres lead :
15.55.1 120 x 120 cm (outside to outside)

Detail of cost for one platform Dismantling cement concrete
1:5:10 4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
=0.216cum Say 0.22cum
Dismantling brick work in cement mortar 4.00x0.20x0.30m
=0.24cum
4.00x0.10x0.20m =0.088cum
Detail of cost for one platform

4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
Total =0.216cum Say 0.22cum
Dismantling brick work in cement mortar
4.00x0.20x0.30m =0.24cum
4.00x0.10x0.20m =0.088cum
Total '=0.328cum Say 0.33cum
Dismantling 40 mm C.C. flooring 1:2:4
1.00x1.00x0.04m =0.04cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

5.80x0.35x0.12m =0.243cum
0.80x1.70x0.075m =0.102cum
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
1.90x1.00x0.04m =0.08cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
8.00x0.20x0.30m =0.48cum
8.40x0.10x0.20m =0.168cum
3.00x1.00x0.04m =0.12cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Cost of each
Say
15.56 Dismantling old plaster or skirting raking out joints and
cleaning the surface for plaster including disposal of rubbish
to the dumping ground within 50 metres lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.57 Dismantling aluminium/ Gypsum partitions, doors, windows,

fixed glazing and false ceiling including disposal of
unserviceable material and stacking of serviceable material
with in 50 meters lead as directed by Engineer-in-charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.58 Demolishing R.C.C. work by mechanical means and stockpiling
at designated locations and disposal of dismantled materials
up to a lead of 1 kilometre, stacking serviceable and
unserviceable material separately including cutting
reinforcement bars.

LABOUR
0128 Mate day 0.0300
Labour for operating pneumatic tools
Labour for cutting reinforcement bars
MACHINERY
0040 Air compressor 250 cfm with two leads for pneumatic cutters/ day 0.1250
hammers.
0039 Tractor with trolley . day 0.0500
0041 Joint cutting machine with 2-3 blades day 0.1250
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Cost of 1.00 cum
Say
15.59 Dismantling of flexible pavement (bituminous courses) by

mechanical means and disposal of dismantled material up to a
lead of 1 kilometre, as per direction of Engineer-in-charge.

LABOUR
0128 Mate 0.0100
MACHINERY
0039 Tractor with trolley . 0.0475
0038 Tractor with ripper attachment 0.0020
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 cum
Cost of 1.00 cum
Say
15.6 Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means,
including loading, transporting, unloading to approved
municipal dumping ground or as approved by Engineer-in-
charge, beyond 50 m initial lead, for all leads including all lifts
involved.


TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
16.1 Preparation and consolidation of sub grade with power road

roller of 8 to 12 tonne capacity after
excavating earth to an average of 22.5 cm depth, dressing to
camber and consolidating with road roller including making
good the undulations etc. and re-rolling the sub grade and
disposal of surplus earth with lead up to 50 metres.

(A) preparation of subgrade.
Earth work in excavation including dressing etc.
100sqm.x22.5cm (average depth) = 22.5cum.
LABOUR
0128 Mate day 1.8000
0115 Coolie day 18.0000
(B) Consolidation of subgrade
Roller charges (one roller does 1860 sqm. of consolidation of
sub - grade with road roller of 8 to 12 tonne capacity including
making good the undulations etc. with earth or quarry spoils

etc.
and rerolling the subgrade
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.2 Extra for compaction of earth work in embankment under

optimum moisture conditions to give at least 95% of the
maximum dry density (proctor density).

LABOUR
(Extra to item No.2.3 in Earth work)
Roller charges (one roller does 1860sqm. Of consolidation per
day of 8 hours and uses 18 litres diesel)

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 cum.
Cost per cum.
Say
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
16.3.2 63 mm to 45 mm size stone aggregate

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
16.3.3 53 mm to 22.4 mm size stone aggregate

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm

MATERIAL
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say

MATERIAL
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
16.3.6 Stone screening 13.2 mm nominal size (Type A)

MATERIAL
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 0.0500
2903 Stone chippings/ screenings 4.75 mm nominal size cum 0.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say
16.3.7 Stone screening 11.2 mm nominal size (Type B)

MATERIAL
2904 Stone chippings/ screenings 150 micron nominal size cum 0.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say
16.3.8 Red bajri

MATERIAL
0304 Bajri cum 1.0000
2311 Carriage of Red bajri cum 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say
16.3.9 Good earth

Excavation :
LABOUR
2241 Carriage of Good earth cum 1.0000
by mechanical transport up to 5 km lead
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.3.10 Moorum
MATERIAL
0810 Moorum cum 1.0000
2265 Carriage of Moorum cum 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say
16.4 Laying, spreading and compacting stone aggregate of
specified sizes to WBM specifications in uniform thickness,
hand picking, rolling with 3 wheeled road/vibratory roller 8-10
tonne capacity in stages to proper grade and camber, applying
and brooming requisite type of screening / binding material to
fill up
interstices of coarse aggregate, watering and compacting to
the required density .

LABOUR
Roller charges (one roller does 30 cum consolidation per day
of 8 hours and uses 18 litres of diesel oil).
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum
Say
16.5 Laying water bound macadam sub-base with brick aggregate

and binding material, earth etc. including screening, sorting
and spreading to template and consolidation with light power
road-roller etc. complete.(payment for brick aggregate and
moorum etc. to be made separately)

LABOUR
0101 Bhisti Day 0.1800
Roller charges (one roller does 230cum. consolidation per day
of 8 hours and uses 18 litres of diesel oil)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say

LABOUR
Roller charges (one roller does 230cum. consolidation per day
of 8 hours and uses 18 litres of diesel oil)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one cum.
Say
16.6 Supplying, stacking and Spreading 6 mm thick red bajri,

watering and rolling complete including preparation of the
surface and rolling.
16.6.1 With road roller/ hand roller

Details of cost for 6 mm thick and 100 sqm area
(A) Supplying and stacking of Red bajri at site.
MATERIAL
0304 Bajri cum 0.6000
2311 Carriage of Red bajri cum 0.6000
(B) Spreading of red bajri
LABOUR
Roller charges (one roller does 1860sqm. consolidation per
day of 8 hours and uses 18 litres of diesel oil)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.7 Brick edging in full brick width and half brick depth including
excavation, refilling and disposal of
surplus earth lead up to 50 metres.
16.7.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
MATERIAL
designation 7.5
LABOUR
9999 Removal of rubbish L.S. 17.9400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metres
Cost per metre
Say
16.8 Brick edging laid lengthwise with half brick depth including
excavation, refilling and disposal of surplus earth lead up to
50 metres :
designation 7.5
MATERIAL
designation 7.5
LABOUR
9999 Removal of rubbish L.S. 4.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost per metre
Say
16.9 Scarifying metalled (water-bound) road surface including

disposal of rubbish, lead up to 50 m and
consolidation of the aggregate received from scarifying with
power road roller of 8 to 10 tonne capacity.

LABOUR
Consolidation of scarified material
100sqm.x50mm = 5cum +
Less 20% wastage = 1 cum.
= 4 cum.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.1 Making bajri path including preparation of subgrade,

supplying and laying brick aggregate of 50 mm nominal size
7.5 cm deep with blinding material consisting of 12 mm
moorum and 12 mm red bajri
consolidated with road roller.

Earth work in excavation including dressing etc.
100x0.075=7.5cum.
2.6.1 (Rate as per item no.2.6.1 of S.H. Earth work) cum 7.5000
Collection and stacking of brick aggregate 53mm nominal size
100x0.075 =7.50cum.
Supply staking Red Bajri
100x0.012= 1.2 cum
16.3.8 Rate as per Item Number 16.3.8 of SH: Road Work cum 1.2000
Collection and stacking of moorum at site
100x0.012 = 1.20cum.
16.3.10 Rate as per Item Number 16.3.10 of SH: Road Work cum 1.2000
Spreading and consolidation of brick aggregate and blinding
material etc.
LABOUR
9999 Sundries L.S. 20.1500
Spreading of red bajri, watering and rolling
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.11 Dry stone pitching 22.5 cm thick including supply of stones

and preparing surface complete.
MATERIAL
1158 Stone for pitching 15 cm x 22.5 cm cum 2.2500
2216 Carriage of Stone blocks white & red sand stone & kota stone
slab tonne 5.0500

2.25x2245/1000 = 5.05 t
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.12 Dry brick pitching half brick thick in drains including supply of
bricks and preparing the surface complete :
designation 7.5
MATERIAL
designation 7.5
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.13 Cutting road and making good the same including supply of
extra quantities of materials i.e. aggregate, moorum
screening, red bajri and labour required.
16.13.1 bituminous portion

Details of cost for 1.08cum.
(road 6 metres wide, 0.6 metre length wise and 0.30m
(average depth) volume = 1.08 cum).
MATERIAL
Supplying and stacking stone aggregate 53mm to 24 mm
nominal size at site.
16.3.3 Rate as per Item Number 16.3.3 of SH: Road Work Supplying 0.0900
and stacking red bajri at site
and stacking moorum at site
16.3.10 Rate as per Item Number 16.3.10 of SH: Road Work 0.0220
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size 0.0920
2202 Carriage of Stone aggregate below 40 mm nominal size 0.0920
309 Paving bitumen VG-10 of approved quality 0.0110
2211 Carriage of Tar bitumen 0.0110
LABOUR
For cutting road and taking out soling and metalling including
sorting and screening.
0114 Beldar 0.9600
0115 Coolie 0.4800
Relaying soling stone
3.6x0.15=0.54cum.
0114 Beldar 0.2400
0115 Coolie 0.2400
Relaying road metal with extra quantity and consolidation to
0.10 m thickness
3.6x0.10=0.36cum.
0114 Beldar 0.7100
0115 Coolie 0.4800
0101 Bhisti 0.1000
Painting two coats, 3.6sqm. including labour for spreading grit
0114 Beldar 0.4800

0115 Coolie 0.4800
9999 Barrier, chowkidar, spray man, mate, etc. 40.4300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.13.2 Water bound macadam

(road 6 metres wide, 0.6 metre length wise and 0.25 m
(average depth) volume = 0.90 cum).
MATERIAL
Supplying and stacking stone aggregate 53mm to 24 mm
nominal size at site.
and stacking red bajri at site
and stacking moorum at site
LABOUR
For cutting road and taking out soling and metalling including
sorting and screening.
0114 Beldar 0.4800
0115 Coolie 0.2400
Relaying soling stone
3.6x0.15=0.54cum.
0114 Beldar 0.2400
0115 Coolie 0.2400
Relaying road metal with extra quantity and consolidation to
0.10 m thickness
3.6x0.10=0.36cum.
0114 Beldar 0.4800
0115 Coolie 0.4800
0101 Bhisti 0.1000
9999 Barrier, chowkidar, spray man, mate, etc. 53.8200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.14 Cutting bajri paths and making good the same including
supply of extra quantities of brick aggregate,
moorum and red bajri required.

Details of cost for 10 sqm. 10x0.075=0.75cum.
MATERIAL
Supplying and stacking 50mm brick aggregate at site(extra
quantity)
286 Brick Aggregate (Single size) : 50 mm nominal size 0.1900
2260 Carriage of Brick aggregate 0.1900
Supplying and stacking red bajri at site
Supplying and stacking moorum at site
16.3.10 Rate as per Item Number 16.3.10 of SH: Road 0.0600
LABOUR
For cutting, sorting out, spreading and consolidation of
aggregate
0114 Beldar 1.6000
0115 Coolie 0.8000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.15 Supplying at site :

16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm
nominal size) with wooden plugs or 6mm bar nibs wherever
required as per direction of Engineer-in- charge (cost of earth
works in excavation, concrete works in foundation to be paid
Code separately). Unit Quantity

Details of cost for 10 posts = 0.336cum
Cubical contents of one post
Area bottom A1 =
(15+12.5)/2 x8.75+½x3.14 x(6.25)²=
120.31+61.38=181.69sqcm.
Area bottom A2 =
(10+7.5)/2 x6.25+½x3.14 x(3.75)² sqm =
54.68+22.08 = 76.76 sqcm.
(A1A2)^½ =
118.10sqcm A1+A2+(A1A2))^½ = 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
Volume of lower and square portion
(16.5x16.5x75) / 100³ = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum.
Qty. for 10 post
= 0.0336x10 = 0.336cum.
Cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3
graded stone aggregate 12.5mm nominal size)
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Work. cum 0.3360
Extra labour for laying cement concrete in RCC work
Beldar day 0.0340
Bhisti day 0.0670
Mason (brick layer) 1st class day 0.0130
Mason (brick layer) 2nd class day 0.0130
Mate day 0.0130
M.S. Reinforcement
6mm dia. bars
10x4x1.88m = 75.20m+
10x9x0.50m =45.00m = 120.20m
120.20m@0.22kg/m =26.44kg.
5.22.2 Rate as per Item No.5.22.2 of SH: Reinforced cement concrete kg 26.4400
work
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete sqm 6.9900
work
6mm C.Plaster 1:2 (1 Cement : 2 fine sand)
(0.072)/10x9.88 = 0.071
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.0700

LABOUR
9999 Hire and running charges of mixer L.S. 1.9500
9999 Extra for removing burr, cleaning with wire brushes, pock L.S. 13.2600
making with pointed tool etc. complete
9977 Carriage of RCC posts L.S. 53.8200
9999 Wooden plugs or 6mm bar nibs L.S. 12.2200
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.336 cum
Cost for one cum
Say
16.15.2 Welded steel wire fabric of required width having rectangular

mesh painted with two or more coats of enamel paint of
approved shade over a coat of primer (Priming & Painting to
be paid for separately).

Details of cost for 27 sqm (209.25 kg).
MATERIAL
Steel wire fabric 0.9m wide rectangular mesh 75x25mm size
weight not less than 7.75kg/sqm. 30x0.9 = 27sqm

2314 Carriage of Barbed wire tonne 0.2090
7.75x27=209.25kg=0.209tonne
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 209.25 kg
Cost per kg.
Say
16.16 Supplying and fixing turn buckles and straining bolts for
barbed wire fencing.
Details of cost for one set
MATERIAL
1030 Galvanised steel turn buckles each 1.0000
1028 Straining bolts each 1.0000
9977 Carriage of turn buckles and straining bolts L.S. 2.7300
Labour for fixing straining bolts and turn buckles
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per set
Say
16.17 Fencing with R.C.C. post placed at required distance,

embedded in cement concrete blocks, every 15th post, last
but one end post and corner post shall be strutted on both
sides and end post one side only, provided with horizontal
lines and two diagonals of barbed wire weighing 9.38 kg per
100 metres (minimum), between the two posts fitted and
fixed with G.I. staples on wooden plugs or G.I. binding wire
tied to 6 mm bar nibs fixed while casting the post (cost of
R.C.C. posts, struts, earth work and concrete to be paid for
separately) :- Payment to be made per metre cost of total
length of barbed wire used.
16.17.1 With G.I. barbed wire

Details of cost for 30m
MATERIAL
G.I. barbed wire
30x9 = 270m +
10x6.32 = 63m
Total = 333m
333m @9.38kg/100m =31.24kg = 0.31q
1029 Galvanised steel barbed wire quintal 0.3100
9999 G.I. staples or binding wire L.S. 49.4000
LABOUR
Labour for fixing costs in line, fixing and stretching wire

9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 333m
Cost per m
Say
16.18 Fencing with angle iron post placed at required distance

embedded in cement concrete blocks, every 15th post, last
but one end post and corner post shall be strutted on both
sides and end post on one side only and provided with
horizontal lines and two diagonals interwoven with horizontal
wires, of barbed wire weighing 9.38 kg per 100 m (minimum),
between the two posts fitted and fixed with G.I. staples, turn
buckles etc. complete. (Cost of posts, struts, earth work and
concrete work to be paid for separately). Payment to be made
per metre cost of total length of barbed wire used.
16.18.1 With G.I. barbed wire

MATERIAL
G.I. barbed wire
30x9 = 270.00m
2x10x(12+32)1/2 = 63.24
= 333.24m
333.24m @ 9.38kg/100m =31.26 kg say 0.31 q
1029 Galvanised steel barbed wire quintal 0.3100
Supplying and fixing Turn buckle & staple
16.16 Rate as per Item Number 16.16 of SH: Road Work each set 10.0000
9999 G.I. staples L.S. 49.4000
Labour for fixing posts in line and fixing and stretching wire:

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 333.24m
Cost per m
Say
16.19 Supplying at site Angle iron post & strut of required size
including bottom to be split and bent at right angle in
opposite direction for 10 cm length and drilling holes up to 10
mm dia. etc. complete.

MATERIAL
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
Total = =1.05 qtl
LABOUR
For spotting, bending of angle and drilling holes etc. :
9999 Sundries such as drilling bit etc. L.S. 19.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 quintal
Cost of one kg
Say
16.2 Welded steel wire fabric fencing with posts of specified

material and of standard design placed and embedded in
cement concrete blocks 45x45x 60 cm of mix 1:5:10 (1
cement:5 fine sand : 10 graded stone aggregate 40 mm
nominal size), every 15th post, last but one end post and
corner post shall be strutted on both sides and end post on
one side only and struts embedded in cement concrete blocks
70x45x50 cm of the same mix, provided with welded steel
wire fabric fixed between the posts fitted and fixed with G.I.
staples on wooden plugs or tied to 6 mm bar nibs with G.I.
binding wire (cost of posts,
welded steel wire fabric, painting, earth work in excavation
and concrete to be paid for separately).

Details of cost for 30 metres i.e.30x1.20 =36.00sqm
Labour for fixing posts in line fixing and stretching - welded
wire fabric :
9999 G.I. staple or binding wire L.S. 53.8200
9999 Sundries L.S. 53.8200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 36 sqm
Cost per sqm
Say
16.21 Engraving letters in hard stone

Details of cost for 6 letters 8 cm height
LABOUR
For Engraving stone-
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6 letters of 8cm heights
Cost per cm. height per letter
Say
16.22 Providing and fixing 15x15x90 cm boundary stone of hard

stone with top 30 cm chisel dressed on all
four sides including top (cost of excavation, refilling and
concrete etc. to be paid for separately).

Details of cost for one stone
1151 Boundary stone top chisel dressed 15x15x90 cm each 1.0000
Labour for fixing
9977 Carriage to site L.S. 4.1600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each.
Say
16.23 Providing and fixing 15 cm dia at top, 20 cm at bottom and 90

cm high precast reinforced cement concrete 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size) boundary stone as per standard design,
including finishing smooth with cement mortar 1:3 (1
(cost of excavation, refilling and concreting to be paid for
separately).

(i) Cement concrete 1:1½:3 (1 cement : 1½ Coarse sand : 3
graded stone aggregate 20mm nominal size)
Volume of frustum of cone:
L/3 x [A1+A2+sqrt(A1A2)] = 0.825/3 x
[0.095²+0.075² + sqrt(0.095 x 0.075²)]x3.142=0.01882 (A)
Volume of hemi sphere:
½ x 4 /3 x PI x r³ = ½x(4/ 3)x(22/7)x0.075³=0.00100 (B)
Total volume = A+B = 0.01982 Say 0.02cum
(ii) Extra for laying cement concrete in RCC work
LABOUR
0128 Mate day 0.0008
(iii) M.S. reinforcement- 6mm dia. Bar
5.99 metre =5.99x0.22 =1.32kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 1.3200
(iv) Centering and shuttering-
1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
work
(v) 6mm cement plaster 1:3 (1 Cement : 3 fine sand)-
1/2x3.142 (0.19+0.15)x0.825 =0.44 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
MATERIAL
sand) cum 0.0385

Labour for mortar
Labour for plaster
9999 Extra for removing burr L.S. 0.6800
9999 Scaffolding, sundries etc. L.S. 0.6000
(vi) Labour for fixing
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each.
Say
16.24 Providing and fixing precast reinforced cement concrete

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size) kilometre stone as per standard design,
including finishing smooth in 1:3 cement mortar (1 cement : 3
fine sand) but excluding the cost of earth work, concrete in
foundation, painting and lettering etc. which shall be paid for
separately.
16.24.1 35x111x25 cm size

(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size) in Kilometre
stone
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175)²x0.25m = 0.012
= 0.095cum
Say 0.10cum.
0128 Mate day 0.0040
(iii) M.S. reinforcement- 0.10cum @48.06kg/cum. =4.806kg.
Say 4.81kg.
concrete work
(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 = 0.007 sqm
2x2x0.25x0.1 = 0.010sqm
1/2x3.142/4x(0.35)² = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1.092sqm. Say 1.09 sqm
work
Qty. as per centering and shuttering = 1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35)²= 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
sand) cum 0.0110

Labour for mortar
Labour for plaster
TOTAL
TOTAL
TOTAL
TOTAL
Cost per stone
Say
16.24.2 50x152.5x25 cm size

0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
1/2x22/7x(0.25)²x0.25m = 0.025cum.
= 0.186 cum.
Say 0.19cum.
0128 Mate day 0.0080
(iii) M.S. reinforcement-
0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
concrete work
(0.50+2x0.25)x1.145 = 1.145 sqm
1/2x(0.25)²x3.142 = 0.098
3.142(0.25)x(0.25) =0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25 =0.125
=1.722sqm. Say 1.72 sqm
work
Qty. as per centering and shuttering
= 1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 = 0.068sqm. +
1/2x(0.25)²x3.142 = 0.098 +
2x0.52x001 = 0.010
= 2.470sqm Sq. 2.47 sqm.
MATERIAL
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna cum 0.2000
sand)
Labour for mortar
Labour for plaster
TOTAL
TOTAL
TOTAL
TOTAL
Cost per stone
Say
16.24.3 35x93.5x18 cm size

0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum.
= 0.060 cum.
0128 Mate day 0.0024
(iii) M.S. reinforcement-0.06cum @48.06kg/cum. =2.8836 kg.
Say 2.88 kg.

concrete work
(0.35+2x0.18)x0.835 = 0.593 sqm
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 = 0.007sqm
2x2x0.18x0.01 = 0.007sqm
= 0.810 sqm
work
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)-
Qty. as per centering and shuttering = 0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm
= 1.146 sqm Say 1.15sqm
MATERIAL
sand)
Labour for mortar
Labour for plaster
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
16.25 Surface dressing on new surface with paving bitumen of grade

VG - 10 of approved quality using 2.25 kg of bitumen per sqm
with 1.65 cum of stone chippings 13.2 mm nominal size per
100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne
capacity etc. complete:

MATERIAL
Bitumen S-90@2.25kg per sqm. =225 kg = 0.225 tonne.
Stone aggregate 13.2mm nominal size @ 1.65cum. per
100sqm.

Steam coal for heating bitumen @2 quintal per tonne of
bitumen
= 2x0.225=0.450q
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate
(a) For cleaning :
0128 Mate day 0.1100
(b) For heating and spraying bitumen :
(c) For screening and spreading aggregate :
0128 Mate day 0.1100
(d) Consolidation Charges
0001 Hire charges of Coal tar Boiler 900 to 1400 litres day 0.1200
0007 Hire charges of Coal tar Sprayer day 0.1100
(e) Misc:
0364 Wire brush each 0.1100
0365 Soft brush each 0.3200
9999 Brooms and gunny bags L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 Sqm.
Cost per Sqm.
Say
16.26 Surface dressing on new surface in two coats with bitumen of

grade VG -10 of approved quality using
1.8 kg of bitumen per sqm with 1.5 cum of stone chippings
13.2 mm nominal size per 100 sqm of road surface for first
coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of
stone chippings 11.2 mm nominal size per 100 sqm of road
surface for second coat, including consolidation of each coat
separately with road roller of 6 to 8 tonne capacity etc.
complete.

MATERIAL
Bitumen S-90/A-90 @ 1.8kg/sqm.=180kg.=0.18 tonne

Steam coal for heating bitumen @2 quintal per tonne
(a) For cleaning :
0128 Mate day 0.1100
0128 Mate day 0.2700
(e) Misc:
9999 Sundries L.S. 16.3800
Second Coat
MATERIAL
Bitumen S-90/A-90 @ 1.10kg per sqm = 110kg.=0.11 tonne

bitumen
(a) For cleaning and brushing loose chips:
0128 Mate day 0.0600
0128 Mate day 0.0700
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for per 100 sqm.
Cost per 1 Sqm.
Say
16.27 Surface dressing on old surface with hot bitumen of grade VG

- 10 of approved quality using 1.95 kg of bitumen per sqm
100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne
capacity, etc. complete.

MATERIAL
Bitumen 1.95kg./sqm.= 195kg. or 0.195t
@ 1.50cum. per 100 sqm.
bitumen
bitumen and aggregate etc.
(a) For cleaning :
0128 Mate day 0.0600
0128 Mate day 0.6600
(e) Misc:
Brushes etc. for cleaning
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.28 Surface dressing one coat on new surface with bitumen of

specified grade at a rate of 1.95 kg/sqm of surface area with
1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm
of road surface, including consolidation with road roller of 6
to 8 tonne capacity , etc. complete :
16.28.1 Using bitumen emulsion (minimum 50% bitumen
content- RS grade conforming to IS : 8887)

MATERIAL
0310 Bitumen emulsion tonne 0.1950
@1.50 cum. per 100 sqm. = 1.50cum

bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.1100
(b) For Spraying bitumen emulsion :
0128 Mate day 0.1100
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.29 Surface dressing one coat on old surface with bitumen of

specified grade at the rate of 1.22 kg/ sqm of surface area
100 sqm of road surface, including consolidation with road
roller of 6 to 8 tonne capacity etc. complete :
16.29.1 Using bitumen emulsion (minimum 50% bitumen
content- RS grade conforming to IS : 8887)

MATERIAL
Bitumen emulsion @1.22 kg per Sqm. =122
kg. or 0.122 tonne
0310 Bitumen emulsion tonne 0.1220
Stone chippings 11.2mm nominal size @ 1.10cum. per 100
sqm
(a) For cleaning :
0128 Mate day 0.0600
(b) For Spraying bitumen emulsion :
0128 Mate day 0.0700
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.3 Providing and applying tack coat using hot straight run
bitumen of grade VG - 10, including heating the bitumen,
spraying the bitumen with mechanically operated spray unit
fitted on bitumen boiler, cleaning and preparing the existing
road surface as per specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm

MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.0750
MATERIAL
(with thick wire)
9999 Gunny bags L.S. 7.8000
LABOUR
(a) For cleaning :
0128 Mate day 0.0600
(b) For heating bitumen:
(c) For applying tack coat:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.30.2 On bituminous surface @ 0.50 Kg / sqm

MATERIAL
MATERIAL
(with thick wire)
9999 Gunny bags L.S. 7.8000
LABOUR
(a) For cleaning :
0128 Mate day 0.0600
(c) For applying tack coat:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.31 Providing and applying tack coat using bitumen emulsion

conforming to IS:8887, using emulsion pressure distributer
including preparing the surface & cleaning with mechanical
broom.
16.31.1 With rapid setting bitumen emulsion

16.31.1.1 On W.B.M / W.M.M. @ 0.4kg/sqm
MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne 1.4000
1995
MACHINERY
0075 Road sweeper (Mechanical Broom) @ 1250 sqm. Per hour. hour 2.8000
0058 Air compressor hour 2.8000

0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 2.0000
LABOUR
0128 Mate day 0.0800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
16.31.1.2 On bituminous surface @ 0.25kg/sqm

MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne 0.8750
1995
MACHINERY

LABOUR
0128 Mate day 0.0800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
16.31.2 With medium setting bitumen emulsion
16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm

MATERIAL
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : tonne 1.4000
8887- 1995
MACHINERY

LABOUR
0128 Mate day 0.0800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
16.31.2.2 On bituminous surface @ 0.25kg/sqm

MATERIAL
8887- 1995
MACHINERY

LABOUR
0128 Mate day 0.0800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of
stone chippings of 13.2 mm size and 11.2 mm size
respectively per 100 sqm and 52 kg and 56 kg of hot bitumen
per cum of stone chippings of 13.2 mm and 11.2 mm size
respectively, including a tack coat with hot straight run
bitumen, including consolidation with road roller of 6 to 9
tonne capacity etc. complete (tack coat to be paid for
separately).
16.32.1 With paving Asphalt grade VG - 10 heated and then
mixed with solvent at the rate of 70 grams per kg of asphalt

Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.

(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
2916 Paving Asphalt VG 10 of approved quality tonne 0.1440
Solvent 70gms/kg. for 0.144 t = 10.08kg.
2914 Solvent kilogram 10.0800
@1.80cum. per 100 sqm

Steam coal for heating bitumen @ 2 quintals per tonne of
bitumen = 2x0.144=0.288q
(a) For cleaning :
0128 Mate day 0.0800
(c) For screening and spreading premixed
aggregate :
(at barrier for night watch and for road roller)
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.0400
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.32.2 With paving Asphalt grade VG - 30 with no solvent

Asphalt 60/70
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
7309 Paving Asphalt VG-30 of approved quality tonne 0.1440
@1.80cum. per 100sqm.

@0.90cum. per 100sqm
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.144=0.288q

(a) For cleaning :
0128 Mate day 0.0800
aggregate :
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.32.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC:

SP: 53
Refinery Modified Bitumen CRMB 55
Modified Bitumen CRMB - 55 (Refinery produced)
:52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
7739 Modified Bitumen Refinery produced CRMB - 55 tonne 0.1440
Solvent 70gms/kg. for 0.144 t = 10.08kg
Stone chippings 13.2mm nominal size @ 1.80cum. per
100sqm.
@1.80cum. per 100sqm.

bitumen = 2x0.144=0.288q
(a) For cleaning :
0128 Mate day 0.0800
(c) For screening and spreading premixed aggregate :
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of
stone chippings of 13.2 mm and 11.2 mm size respectively per
100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone
chippings of 13.2 mm and 11.2 mm size respectively, including
a tack coat with hot straight run bitumen, including
consolidation with road roller of 6 to 9 tonne capacity etc.
complete (tack coat to be paid for separately).
61.33.1 With paving Asphalt grade VG - 10 heated and then mixed

with solvent at the rate of 70 grams per kg of asphalt

Paving Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings
@2.25cum. of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. Of aggregate @1.12cum. of
11.2mm nominal size.
Bitumen :52x2.25+56x1.12= 180kg
MATERIAL
Solvent 0.07x180=12.60kg.
@1.80cum. per 100 sqm.

2.25+1.12=3.37 cum
bitumen =2x0.18=0.36q
(a) For cleaning :
0128 Mate day 0.0800
aggregate :
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.33.2 With paving Asphalt grade VG - 30 with no solvent

Paving Asphalt 60/70
@2.25cum. of 13.2mm nominal size
(ii) Hot bitumen @56kg. per cum. of stone aggregate@1.12cum. of 11.2mm nominal size size
Bitumen :52x2.25+50xl. 12= 180kg
MATERIAL

2.25+1.12=3.37 cum.

(a) For cleaning :
0128 Mate day 0.0800
(c) For cleaning, mixing and spreading pre-mix aggregate :

1.05x0.18)/0.267 = 0.71 Nos.
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say

SP: 53
MATERIAL
Refinery Modified Bitumen CRMB 55
@2.25cum. of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. Of aggregate @1.12cum. of
11.2mm nominal size.
52x2.25+56x1.12=180kg
Solvent 0.07x180=12.60kg
@2.25 cum. per 100sqm

@1.12 cum. per 100sqm
2.25+1.12=3.37 cum.+
bitumen =2x0.18=0.36q
(a) For cleaning :
0128 Mate day 0.0800
aggregate :
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.34 2 cm premix carpet surfacing with 2.4 cum of stone chippings

11.2 mm nominal size per 100 sqm and
bitumen emulsion (medium setting min. 65% bitumen
content) complying with IS : 8887, using 96 kg per cum of
chippings, including consolidation with road roller of 6 to 9
tonne capacity etc. complete.

MATERIAL
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x2.4=230kg =0.230t
8887- 1995
@ 2.4cum. per 100 sqm
LABOUR
(a) For mixing and spreading premix aggregate :
(b) Consolidation Charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings

10 mm nominal size per 100 sqm and bitumen emulsion
(medium setting min. 65% bitumen contents) complying with
IS : 8887, using 96 kg per
cum of chippings of road surface, including consolidation with
road roller etc complete .

MATERIAL
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x3 = 288 kg = 0.288 t
8887- 1995
@ 3.00 cum. per 100 sqm
LABOUR
(a) For mixing and spreading premix
aggregate :
(b) Consolidation Charges
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.36 Providing and laying Bitumen Penetration Macadam with hard

stone aggregate of quality, size and grading as specified, with
bitumen of suitable penetration grade, including required key
aggregate as specified, spreading coarse aggregate with the
help of self propelled/ tipper tail mounted aggregate spreader
and applying bitumen by a pressure distributor and then
spreading key aggregate with the help of aggregate spreader
complete, including consolidation with road roller of
minimum 8 to 10 tonne capacity to achieve specified values of
compaction and surface accuracy :
16.36.1 For 50mm compacted thickness using coarse aggregate of size

50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of
size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving
asphalt grade VG - 10 @
Code 50 kg/ 10 sqm. Unit Quantity

MATERIAL
Taking stone aggregate 40mm = 45%
20mm = 44%
11.2mm = 8%
Stone dust = 3%
2202 Carriage of Stone aggregate below 40 mm nominal size

i.e. 20 mm cum 12.1000
@ 50kg/10 sqm.
(B) Labour:
0114 Beldar day 16.6700
for spreading stone metal
for hand packing
dry rolling
Bajri spreader
for spreading key aggregate
for spraying bitumen
of power roller
0128 Mate day 1.7700
(C) Machinery :
9999 Misc. items as spray nozzle, joint paper, coconut oil, country L.S. 351.0000
soap etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 370 Sqm.
Cost per sqm.
Say
16.36.2 For 75 mm compacted thickness in two layers using stone
aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm
key aggregate of size 20.0 mm graded @ 0.18 cum per 10
sqm. With paving asphalt grade VG - 10 @ 68 kg/10 sqm.

MATERIAL
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.

LABOUR
0114 Beldar day 25.0000
for spreading stone metal
for hand packing
dry rolling
/Bajri spreader
for spreading key aggregate
0114 Beldar day 10.0000
for spraying bitumen
road roller
0128 Mate day 2.6500
MACHINERY
9999 Misc. items as spray nozzle, joint paper, coconut oil, country L.S. 429.0000
soap etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm.
Cost per sqm.
Say
16.37 Providing and laying bitumen mastic wearing course (as per
specifications) with industrial bitumen of grade 85/25
conforming to IS : 702, prepared by using mastic cooker and
laid to required level and slope, including providing antiskid
surface with bitumen precoated fine grained hard stone
chipping of approved size at the rate of 0.005 cum per 10 sqm
and at approximate spacing of 10 cm centre to centre in both
directions, pressed into surface protruding 1 mm to 4 mm
over mastic surface, including cleaning the surface, removal of
debris etc. all complete. (Considering bitumen using 10.2% as
per
MORTH specification).
16.37.1 25 mm thick
Details of cost for surface area of 17.40 sqm for single layer of
25 mm finished thickness.
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c
Volume of bitumen mastic = 1000/2300= 0.435 cum

surface area = 0.435/0.025 = 17.4 sqm.
(i) Bitumen of penetration 85/25 @ 10.2% by weight of mix

approved quality
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
(iii) Weight of fine aggregate @ 15%
850 x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083 cum
(iv) Weight of lime stone dust @ 45% (850- 340-127.5) =
382.50 kg
Volume of lime stone dust 382.50/2200 =0.174 cum.
(v) Precoated stone chipping for surface finish:
Volume of chips @ 0.005 cum/10 sqm=1
7.4x0.005/10 = 0.0087 cum say 0.009 cum
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
approved quality
(0.222 + 0.009) =0.231 cum.
LABOUR
0128 Mate day 0.5000
0016 Mastic Cooker day 0.5000
9999 sundries (Sealing of joints, placing angles, wastage materials) L.S. 153.2700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 17.40 sqm
Cost per sqm
Say
16.37.2 40 mm thick
Details of cost for surface area of 10.875sqm for single layer
of 40 mm finished thickness.
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c
Volume of bitumen mastic = 1000/2300= 0.435 cum

surface area = 0.435/0.040 = 10.875 sqm.
approved quality
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
(iii) Weight of fine aggregate @ 15% 850 x15/100 = 127.5 kg.,
volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum

(iv) Weight of lime stone dust @ 45% (850-340-127.5) =
382.50 kg
Volume of lime stone dust 382.50/2200 =0.174 cum.
(v) Precoated stone chipping for surface finish:
Volume of chips @ 0.005 cum/10 sqm=
17.4x0.005/10 = 0.0087 cum say 0.009 cum
Bitumen for precoated stone chipping @
2%=0.009x1600x2/100= 0.288 say 0.30 kg.
approved quality
(0.222 + 0.009) =0.231 cum
for mastic cooker (Taking capacity of cooker as one tonne)
LABOUR
0128 Mate day 0.5000
0016 Mastic Cooker day 0.5000
9999 sundries (Sealing of joints, placing angles, wastage materials) L.S. 153.2700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.875 sqm
Cost per sqm
Say
16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved

quality, using stone chippings (60% with 12.5 mm nominal size
and 40% with 10 mm nominal size) @ 1.65 cum per 100 sqm
and coarse sand @ 1.65 cum per 100 sqm of road surface and
with bitumen @ 56 kg/cum of stone chippings and @ 128
kg/cum of sand over a tack coat with hot straight run
tonne etc. complete. (tack coat to be paid separately) :

with solvent at the rate of 70 grams per kg of
asphalt

80/100 bitumen @56kg. per cum. of aggregate and 128kg. per
cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
MATERIAL
Solvent 0.070 kg. x 303 kg. = 21.21kg
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.1600
(b) For heating bitumen :

(d) Consolidation charges :
(at barriers for night watch and for road roller)
(e) Misc :
Wire brush (with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.38.2 With paving Asphalt grade VG - 30

60/70 bitumen @56kg. per cum. of aggregate and 128kg. per
cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total= 0.303t
MATERIAL
bitumen = 2x0.303=0.606q
(a) For cleaning :
0128 Mate day 0.1600
(c) For cleaning, mixing and spreading
pre-mix aggregate :
(at barriers for night watch and for road roller)
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say

SP : 53
MATERIAL
@56kg. per cum. of aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total = 0.303 t
0.070 kg. x 303 kg. = 21.21kg
(a) For cleaning :
0128 Mate day 0.1600

(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.39 4 cm thick bitumastic sheet with hot bitumen of approved
quality, using stone chippings (60% with 12.5 mm nominal size
and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm
and coarse sand @ 2.60 cum per 100 sqm of road surface and
with bitumen @ 56 kg/cum of stone chippings and @ 128
kg/cum of sand over a tack coat with hot straight run
tonne etc. complete. (tack coat to be paid separately) :

with solvent at the rate of 70 grams per kg of asphalt

MATERIAL
@56kg. per cum. of aggregate and 128kg.
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
0.70kg.x479=33.53kg
bitumen = 2x0.479=0.958q
(a) For cleaning :
0128 Mate day 0.1600
pre-mix aggregate :
(e) Misc :
(with thick wire)
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.39.2 With paving asphalt grade VG - 30 with no solvent

MATERIAL
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
bitumen =2x0.479=0.958 qtl
(a) For cleaning :
0128 Mate day 0.1600
pre-mix aggregate :
(e) Brushes etc. for cleaning :-
(with thick wire)
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say

SP : 53
MATERIAL
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 tonne
0.70kg.x479=33.53kg.
bitumen = 2x0.479=0.958q
(a) For cleaning :
0128 Mate day 0.1600

(e) Misc :
(with thick wire)
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.4 Providing and laying seal coat of premixed fine aggregate
( passing 2.36 mm and retained on 180 micron sieve) with
bitumen using 128 kg of bitumen of grade VG - 10 bitumen
per cum of fine aggregate and 0.60 cum of fine aggregate per
100 sqm of road surface, including rolling and finishing with
road roller all
complete.

MATERIAL
@ 128kg/cum. of sand 128x0.60 =
76.80kg. = 0.0768 m.t
(a) For cleaning :
0128 Mate day 0.0600
0.38/96x76.8

11.39/0.75x0.60
0.06/0.75x0.60
(d) Miscellaneous :
(e) Misc :
(with thick wire)
9999 Sundries L.S. 18.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.41 Providing and laying seal coat over prepared surface of road
with bitumen heated in bitumen boiler fitted with the spray
set spraying using 98 kg of bitumen of grade VG - 10 and
blinding surface with 0.90 cum of stone aggregate of 6.7 mm
size (Passing 11.2 mm sieve and retained on 2.36 mm sieve)
per 100 sqm
of road surface, including rolling and finishing with power
road roller all complete.

MATERIAL
(a) For heating and spraying bitumen :
(b) For cleaning :
0128 Mate day 0.1100
(c) For screening and spraying aggregate :
0128 Mate day 0.0500
(d) Misc :
(e) Misc :
(with thick wire)
9999 Sundries L.S. 18.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 40 mm nominal size) in pavements, laid to
required slope and camber in panels as required including
consolidation finishing and tamping complete.

MATERIAL

LABOUR
MACHINERY

9999 Sundries L.S. 26.0000
Side shuttering
Taking the slab to be 5cm thick and width to be 6 metre,
length of road 27 metre =
9.90/24.30 = 0.407 sqm
work
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
16.43 Providing and laying design mix cement concrete of M-30

grade, in roads/ taxi tracks/ runways, using cement content as
per design mix, using coarse sand and graded stone aggregate
of 40 mm nominal size in appropriate proportions as per
approved & specified design criteria, providing dowel bars
with sleeve/ tie bars wherever required, laying at site,
spreading and compacting mechanically by using needle and
surface vibrators, levelling to required slope/ camber,
finishing
with required texture, including steel form work with sturdy

M.S. channel sections, curing, making provision for
contraction/ expansion, construction & longitudinal joints (10
mm wide x 50 mm deep) by groove cutting machine,
providing and filling joints with approved joint filler and
sealants, complete all as per direction of Engineer-in-charge
(Item of joint fillers, sealants, dowel bars with sleeve/ tie bars
to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum.

Excess/ less cement used as per design mix is payable/
16.43.1 Cement concrete prepared with batch mixing machine

MATERIAL

LABOUR :- FOR MIXING AND LAYING
0128 Mate day 0.0400
For compaction by vibrator
MACHINERY
0004 Production cost of concrete by batch mix plant. cum 1.0000
(Assuming 25 cum. per day)

0021 Pin vibrator day 0.0250
(SHP) with 50 cum. output per day
0022 Surface Vibrator day 0.0500
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH: Road work cum 1.0000
9999 Cutting and making joints L.S. 50.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.43.2 Cement concrete manufactured in automatic batching plant

(RMC plant) i/c transportation to site in transit mixer

MATERIAL

LABOUR :- FOR MIXING AND LAYING
0128 Mate day 0.0400
For compaction by vibrator
MACHINERY
0004 Production cost of concrete by batch mix plant. cum 1.0000
(Assuming 25 cum. per day)
0029 Carriage of concrete by transit mixer. km/ cum 10.0000

0021 Pin vibrator day 0.0250
(SHP) with 50 cum. output per day
0022 Surface Vibrator day 0.0500
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH: Road work cum 1.0000
9999 Cutting and making joints L.S. 50.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.43A Annexure ‘A’ to Item number 16.43

MATERIAL:
i) Painting with primer
(i) Construction joint
6.15m. long 30cm deep
6.15x(0.30+0.01)= 1.91sqm.+
ii) Dummy joints
4.61m long and 10cm deep 10mm wide
4.6 lx(0.10+0.10+0.01) = 0.97 sqm.
=2.88 sqm
2.88sqm. @0.26 lit./sqm. = 0.75 lit. +
Total =0.78 lit
(ii) Joint sealing compound (Grade A) for construction joint
6.15m long 10mm wide 25mm deep.

6.15x2x2.5cm = 3075cucm
For dummy joints Total = 7685 cum
461xl.0xl0cm. = 4610cucm.
Total = 7685 cum
Add 5% wastage = 384 cucm
Total = 8069 cucm
Say 8.07 cudm. @1.2kg/cudm = 9.68 kg
0370 Coal (steam) qutntal 0.0150
LABOUR:
(ii) For applying primer qty. = 2.88 sqm
(iii) Labour for heating and filling sealing compound.
(iv) Beldar for heating, carrying and pouring of bitumen

TOTAL
Cost for 8.5 cum
Cost per cum
Say
16.43B Annexure ‘B’ to Item number 16.43

ANALYSIS OF ANNEXTURE 'B' 16.43B (Required in 16.43)
STEEL FORM WORK :
Part-I Cost of materials :
Assuming that pavement 30m long 22.5m wide and 0.30m
deep having panel size 6.15x4.61x0.30m or 8.50cu. laid in a
day of 8 hrs. Hence form work to be provided for 2 days.
MATERIAL
22x30.75 = 676.50
2x46.10 = 92.20
Total = 768.70m.
768.70 @ 83.10 kg/ m = 25.44 M.T.
Assuming that channel will become unserviceable after use
for 5000 slab (100 times) and salvage value of steel shall fetch
20% of its basic cost.
Part-II Labour for assembling, erection, dismantling and
cleaning the shuttering.
Assuming that 255 labour for steel shuttering shall be
required as compared to timber shuttering.
Contact area of 50 slabs of steel shuttering.
Long channel = 11x20x0.30 = 66.00
= 2x45.10x0.30 = 27.06
Total= 93.06
LABOUR
Carriage of steel for extra lead of runway
TOTAL
Cost for 8.5 cum
Cost per cum
Say
16.44 Extra for providing and mixing hardening compound of

approved quality as per manufacturer's
specification in cement concrete.

Details of cost for 1 litre
MATERIAL
(including cartage)
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost per litre
Say

TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per litre
Say
16.45 Providing and fixing in position pre-moulded joint filler in
expansion joints.
Details of cost for 18mm thick 15cm deep and 300m in length
MATERIAL
0317 Premoulded joint filler 12 mm thick sqm 45.0000
;=300x0.15 = 45 sqm
45x0.018 =0.81cum.
Weight 256.3kg. per cum. = 256.3x0.81
;=207.6kg. say 0.21 tonne
Labour for fixing etc. :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300m length, 18mm width and 15cm depth
Cost for one cm. depth one cm. width per metre length.
Say
16.46 Providing and laying in position bitumen hot sealing

compound for expansion joints etc.
16.46.1 Using grade 'A' sealing compound.
Details of cost for 20mm wide 20mm deep and 300 metres in
length.
Sealing compound_x0002_
300x0.02x0.02 = 0.12cum.
Weight 256.3kg. per cum.
= 256.3x0.12 = 30.76 kg
MATERIAL
0314 bitumen hot sealing compound : grade A kilogram 30.7600
30.76 = 0.3076 Say 0.03 tonne
Labour for filling :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 20mm depth, 20mm width and 300m length
Cost for one cm. depth one cm. width per metre length
Say
16.47 Painting runway/taxi track/apron marking with adequate nos

of coats to give uniform finish with road marking paint of
superior make as approved by the Engineer-in-charge, i/c
cleaning the surface of ail dirt, scales, oil, grease and other
foreign material etc. and lining out complete.
16.47.1 New work (Two or more coats)

MATERIAL
1st Coat - 1.66 +
2nd Coat -1.13
Total = 2.79
7256 Superior quality road marking paint (water based) litre 2.7900
9977 Carriage of paint L.S 5.0700
LABOUR
(including painting brush, wire brush, labour for controlling
traffic and other T&P etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost per sqm.
Say
16.47.2 Old work (One or more coats)

MATERIAL
7256 Superior quality road marking paint (water based) litre 1.6600
9977 Carriage of paint L.S 1.1200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost per sqm.
Say
16.48 Painting road surface marking with adequate nos of coats to

give uniform finish with ready mixed road marking paint
conforming to IS : 164, on bituminous surface in white/yellow
shade, including cleaning the surface of all dirt, scales, oil,
grease and foreign material etc. complete

MATERIAL
7256 Road marking paint (spirit based) litre 1.4800
(confirming to IS 164 spirit base)
9977 Carriage of paint (1.48/0.8x0.08x6.9) L.S 2.6500
LABOUR
0128 Mate day 0.1000
for stretching of rope & erecting of barricading
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost per sqm.
Say

MATERIAL
7256 Road marking paint (spirit based) litre 0.8900
(confirming to IS 164 spirit base)
9977 Carriage of paint (1.48/0.8x0.08x6.9) L.S 0.6500
LABOUR
0128 Mate day 0.0600
for stretching of rope & erecting of barricading
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost per sqm.
Say
16.49 Making bell mouth opening/ entrance of size 100x50x50 cm

for drainage pipe under footpath, including providing cement
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) for shape of bell mouth,
including plastering providing and fixing precast R.C.C./
S.F.R.C. slab including plastering with cement mortar 1:3 (1
cement : 3 fine sand) of 6 mm thickness on exposed surface of
the slab & bell mouth including centring, shuttering & neat
cement punning inside the bell mouth etc. all complete.

(i) Earth work in excavation
Channel :- 10x1x1.00x0.20x0.15 = 0.30+
Bell mouth :-10x1x1.00x0.50x(0.18+0.075)/2 = 0.64
Total = 0.94
MATERIAL
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 0.9400
ii) Cement concrete 1:4:8
Channel :-10x1x1.00x0.20x0.075 = 0.15 cum.
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.1500
(iii) Cement concrete 1:3:6
Channel
10x1x1.00x0.20x0.75 = 0.15 +
Bed of bell mouth :
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion
10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :-
10x2x0.35x0.25x0.375 = 0.65 +
Quadrant portion :-
10x1[(0.30x0.30)-3.142/4(0.30)²]x0.30 =0.06+
Central middle part :-
10x1x0.30x0.25x0.075 = 0.05 T
total = 1.95 cum.
4.1.5 (Rate as per item no.4.1.5 S.H. : Cement Concrete) cum 1.9500
(iv) RCC in shelves
10x1x1.00x0.50x0.05 = 0.25cum.
5.3 Rate as per item no. 5.3 SH : Reinforced cement concrete cum 0.2500
work
v) Reinforcement for RCC @100kg/cum.
0.25x100=25kg.
5.22.1 Rate as per item no. 5.22.1 SH : Reinforced cement concrete kg 25.0000
work
(vi) Centering and shuttering For shelves (sides)
10x2(1.00+0.50)x0.05 = 1.50+
Front side of bell mouth :
10x2(0.446)x0.375 = 3.34 +
Pipe portion:
10x[0.30x0.375-3.142/4(030)²] = 0.04 +
Out side of bell mouth Total=
10x(1.00 =0.50)x0.45 = 9.00+
Deduct pipe opening
Total =10x0.785x0.30x0.30 = (-)0.71
Total = 13.17
5.9.1 Rate as per item No.5.9.1 of SH : RCC sqm 13.1700
(vii) cement plaster on RCC slab
10x1.00x0.50 = 5.00 +
10x2(1.00+0.50)x0.05 = 1.50+
Total = 6.50 sqm.
13.16.1 Rate as per item no.13.16.1 sqm 6.5000
(viii) Neat cement punning:
Qty. same as marked (x) at (9vi) =
Total =3.34+ 0.04= 3.38 sqm
Channel portion:
10x1x(0.85+0.30)/2x0.25 = 1.43
Total = 4.81
13.18 Rate as per item no.13.18 S.H. Finishing sqm 4.8100
Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna cum 0.0500
sand)
LABOUR
9999 Hire charges of mixer L.S 1.2700
Labour for plaster
9999 Extra for removing burr L.S 8.7100
TOTAL
TOTAL
TOTAL
TOTAL
Add Cess @ 1% on "Z-A
Cost for 10 nos.
Cost for one bell mouth
Say
16.50 Providing and fixing Glow studs of size 100x20 mm made of
heavy duty body shall be moulded ASA (Acrylic styrene
Acryloretrite ) or HIP (High impact polystyrene) or ABS having
electronically welded micro- prismatic lens with abrasion
resistant coating as approved by Engineer in charge. The glow
stud shall support a load of 13635 kg tested in accordance
with ASTM D4280. The slope of retro- reflective surface shall
be 35 (+/-5) degress to base .The reflective panels on both
sides with at least 12 cm of reflective area up each side. The
luminance intensity should be as per the specification and
shall be tested as described in ASTM I: 809 as recommended
in BS: 873 part 4 : 1973. The studs shall be fixed to the Road
surface using the adhesive conforming to IS, as per procedure
recommended by the manufacturer complete and as per

MATERIAL
7426 Cat's eye each 15.0000
9977 Carriage of cats eyes L.S. 2.6000
LABOUR
9999 Sundries L.S. 39.0000
(including material required for fixing cats eyes and providing
barricading to divert traffic)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 15 Nos.
Cost for one cat's eye.
Say
16.51 Preparation of sub-base road pavement with commercial dry

lime (slaked), fly ash stabilised soil with a mix of 3% lime, 12%
fly ash and 85% local suitable soil by weight, so as to achieve
minimum field C.B.R. of 20, including mixing, rolling with road
roller curing etc. all complete.
16.51.1 Minimum thickness 15 cm

Details of cost for 6.67 sqm. or 1 cum.
MATERIAL
777 Dry hydrated lime (factory made) quintal 0.4100
1980 Fly ash cum 0.2770
LABOUR
(i)For earth work :
2241 Carriage of Good earth cum 0.6550
(ii) For mixing :
(iii) For rolling layers :
(iv) Labour for spreading and watering :
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
16.52 Providing and fixing precast lime fly ash concrete blocks
1:2:3:6 (1 lime: 2 fly ash : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size), including finishing with 10mm
thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot
paths, including preparation of sub grade with a hand
rammer, laying 10 mm thick levelling course of fine sand
(jamuna sand) and filling the joints with fine sand.

Details of cost for a path of area 10sqm/0.9cum.
No. of blocks required for 10sqm. = 108 nos.
(a) Concrete in blocks
(108x0.30x0.30x0.09 = 0.875 cum.)
16.52Y Rate as per sub analysis Item Number 16.52Y of SH:Road cum 0.8750
Work
(b) Labour for surface excavation :
(c) For levelling course of fine sand
LABOUR
(d) For finishing with 10mm thick cement plaster cement
plaster with cement mortar 1:3(1 Cement: 3 Coarse sand)
qty. for 9.72sqm. = 0.0972 cum

(e) For laying blocks and filling joints with Jamuna sand for
filling joints 5mm (av.) thick
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10sqm. or 0.9cum.
Rate per cum.
Say
16.52X Sub Analysis X for sub analysis item Number 16.52Y

Sub Analysis 16.52X for use in sub analysis of 16.52Y
Details of cost for 1cum of lime Fly ash mortar 1:2:3 (lime:2
flyash:3 coarse sand).
MATERIAL
773 Unslaked lime quintal 1.5200
1980 Fly ash cum 0.4800
2266 Carriage of Surkhi cum 0.4800
LABOUR
Labour for slaking the lime making, lime putty, grinding,
measuring, carrying, depositing and mixing.
9999 Running and upkeep of mortar mill L.S. 26.9100
9999 Sundries L.S. 13.5200
TOTAL
Cost of 1.00 cum
Say
16.52Y Sub Analysis Y for Item Number 16.52
Sub Analysis 'Y' (16.52Y) for use in Item No. 16.52
Details of cost for 1 cum. of cement concrete
MATERIAL
Lime Fly ash mortar
16.52X Rate as per sub analysis of Item No 16.52X cum 0.4000
LABOUR
128 Mate day 0.0400
9999 Sundries L.S. 13.5200
9999 Hire charges of steel moulds, table vibrators, rammers, bolts, L.S. 53.8200
nuts and washers etc.
TOTAL
Cost of 1.00 cum
Say
16.53 Providing and fixing concertina coil fencing with punched tape
concertina coil 600 mm dia 10 metre openable length ( total
length 90 m), having 50 nos rounds per 6 metre length, up to
3 m height of wall with existing angle iron 'Y' shaped placed
2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced
barbed wire, stud tied with G.I. staples and G.I. clips to retain
horizontal, including necessary bolts or G.I. barbed wire tied
to angle iron, all complete as per direction of Engineer-in-
charge, with reinforced barbed tape(R.B.T.) / Spring core
(2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm
with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost
of M.S. angle, C.C. blocks shall be paid separately)

Details of cost for 30.00 m length
MATERIAL
8691 Punched tape concertina coil 600 mm dia 10 m openable
length
(Total length 90 m) bundle 5.0000
(Having 50 Nos. of rounds per 6 meter = 1 bundles)
Therefore, Nos. of bundles 30/10=3bundles)
8692 RBT reinforced barbed wire metre 270.0000
9 rounds = 9x30 = 270m
8693 Turn buckle and strengthening bolt each set 10.0000
9999 G.I. staples clips etc. L.S. 49.4000
LABOUR
Labour for fixing straightening cutting of tape/ coils & wire

0.50x2 = 1.00 Nos (Taken double due to height)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
cost for 30.00 metre
cost per metre
Say
16.54 Providing and laying Dense Graded Bituminous Macadam
using crushed stone aggregates of specified grading, premixed
with bituminous binder and filler, transporting the hot mix to
work site by tippers, laying with paver finisher equipped with
electronic sensor to the required grade, level and alignment
and rolling with smooth wheeled, vibratory and tandem
rollers as per specifications to achieve the desired compaction
and density, complete as per specifications and directions of
Engineer-in-Charge.
16.54.1 50 to 100 mm average compacted thickness with bitumen of

grade VG-30 @ 5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
capacity.

Details of cost for 195 cum (or 450 M.T. )
MATERIAL
(percentage by weight of total mix)
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 -22.50 = 427.50 tonnes
Taking density of aggregate = 1.5 tonne/cum
Volume of aggregate =427.50/1.5 =285cum
Grading - II/19 mm (Nominal Size)
25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 79.8 * 50 /100
Qty = 79.8 * 50 /100
Qty = 285 * 40 /100
Lime Filler @ 2% ( percentage by weight of aggregate)
(considering density of lime as 1.29 T per cum) V =8.55/1.29 =
6.63 cum
MACHINERY/ HIRE CHARGES:
62 Hot mix Plant -120 TPH capacity hour 3.0000
63 Hot mix Plant 100 TPH Capacity hour 3.0000
64 Paver finisher Hydrostatic with sensor control 100 TPH hour 6.0000
69 Generator 250 KVA hour 6.0000
53 Tipper -5 Cum tonne/km 4500.0000
Add 10 per cent of cost of carriage to cover cost of loading
and unloading
55 Smooth Wheeled Roller 8 to 10 tonne hour 3.9000
for initial break down rolling.(6*0.65)
54 Vibratory roller 8 to 10 tonne hour 3.9000
for intermediate rolling.(6*0.65)
56 Tandem Road Roller hour 3.9000
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.
(6*0.65)
LABOUR
128 Mate day 0.8400
working with HMP, mechanical broom, paver, roller, asphalt
cutter and assistance for setting out lines, levels and layout of
construction

for checking line & levels
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 195 cum(450 M.T.)
Cost per cum.
Say

grade VG-30 @ 5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

MATERIAL
(percentage by weight of total mix)
Aggregate
25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 79.8 * 50 /100
Qty = 79.8 * 50 /100
Qty = 285 * 40 /100
6.63 cum
76 Drum Type HMP of 60-90 TPH capacity hour 6.0000
@ 75 tonne per hour actual output
Topper 10 tonne capacity (Taken 10km average lead)
450x10=4500 tonne km
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.55 Providing and laying bituminous macadam using crushed

stone aggregates of specified grading premixed with
bituminous binder, transported to site by tippers, laid over a
previously prepared surface with paver finisher equipped with
rollers as per specifications to achieve the desired compaction
and density, complete as per specifications and directions of
Engineer-in-Charge.

grade VG-30 @ 3.50% (percentage by weight of total mix)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
capacity.

MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
Total weight of mix = 450 tonnes Weight of
bitumen = 15.75 tonnes Weight of
aggregate = 450 -15.75 = 434.25 tonnes
Volume of aggregate =434.25/1.5 =289.50cum
25 - 10mm size = 40% of 289.50 = 115.8 cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
5mm and below = 20% of 289.50 = 57.9 cum
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 289.50 * 20 /100
MACHINERY
@75tonne per hour actual output
and unloading
X * 10 / 100 = 13500.00 * 10 / 100
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say

grade VG-30 @ 3.50% (percentage by weight of total mix)
prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
25 - 10mm size = 40% of 289.50 = 115.8 cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 289.50 * 20 /100
MACHINERY
52 Front end loader 1 cum bucket capacity
(incl POL) hour 6.0000
53 Tipper -5 Cum tonne km 4500.0000
and unloading
for initial break down rolling. (6*0.65)
for intermediate rolling. (6*0.65)
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.56 Providing and laying semi- dense Bituminous concrete using

crushed stone aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work
site by tippers, laying with paver finisher equipped with
rollers to achieve the desired compaction and density as per
specification, complete and as per directions of Engineer-in-
Charge.
16.56.1 25 mm compacted thickness with bitumen of grade VG-30 @

5% (percentage by weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared in Batch Type
Hot Mix Plant of 100-120 TPH capacity.

Details of cost for 195 cum (450 tonnes)
Area covered for 25 mm thickness=7800 sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate
9.5 - 4.75 mm size = 57% of 285 = 162.45 cum
4.75mm and below = 41% of 285 = 116.85 cum
Qty = 162.45 * 50 /100
Qty = 162.45 * 50 /100
2903 Stone chippings/ screenings 4.75 mm nominal size nominal cum 116.8500
size
Qty = 285 * 41 /100
nominal size
6.63 cum
and unloading
for initial break down rolling. (6*0.65)
for intermediate rolling. (6*0.65)
(6*0.65)
LABOUR
128 Mate day 0.8400
construction for checking line & levels
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7800 Sqm
Cost per sqm
Say
16.56.2 25 mm compacted thickness with bitumen of grade VG-30 @

5% (percentage by weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared in Drum Type
Hot Mix Plant of 60-90 TPH capacity.

Area covered for 25 mm thickness=7800 sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate
9.5 - 4.75 mm size = 57% of 285 = 162.45 cum
4.75mm and below = 41% of 285 = 116.85 cum
Qty = 162.45 * 50 /100
Qty = 162.45 * 50 /100
Qty = 285 * 41 /100
6.63 cum
@ 75 tonne per houractual output
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction for checking line & levels
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7800 Sqm
Cost per sqm
Say
16.57 Providing and laying Bituminous concrete using crushed stone
aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site by
tippers, laying with paver finisher equipped with electronic
sensor to the required grade, level and alignment and rolling
with smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction and density as per
specification, complete and as per directions of Engineer-in-
Charge.
16.57.1 40/50 mm compacted thickness with bitumen of grade VG-30

@ 5.5% (percentage by weight of total mix) and lime filler @
3% (percentage by weight of Aggregate) prepared in Batch
Type Hot Mix Plant of 100- 120 TPH capacity.

MATERIAL
@5.50% (percentage by weight of total mix
Aggregate
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
(considering density of lime as 1.29 T per cum) V =
12.758/1.29 = 9.89 cum
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 191 cum(450 Tonne)
Cost per cum.
Say

3% (percentage by weight of Aggregate) and waste plastic
additive @ 8% (percentage by weight of bitumen) prepared in
Batch Type Hot Mix Plant of 100- 120 TPH capacity.

MATERIAL
Aggregate
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
Waste Plastic @ 8% of the weigh of bitumen i.e. 24.75*8%
7280 Waste plastic additive tonne 1.9800

Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.57.3 40/50 mm compacted thickness with bitumen of grade PMB-

40 @ 5.5% (percentage by weight of total mix) and lime filler
@ 3% (percentage by weight of Aggregate) prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity.

MATERIAL
312 Bitumen grade PMB - 40 M.T. 24.7500
Aggregate
Weight of aggregate = 450 -24.75 =
425.25 tonnes
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.57.4 40/50 mm compacted thickness with bitumen of grade CRMB-

@ 3% (percentage by weight of Aggregate) prepared in Batch

MATERIAL
Aggregate
Volume of aggregate =425.25/1.5=283.50cum
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
64 Paver finisher Hydrostatic with sensor
control 100 TPH hour 6.0000
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say

3% (percentage by weight of Aggregate) prepared in drum

MATERIAL
Aggregate
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
76 Drum Type HMP of 60-90 TPH capacity
@ 75 tonne per hour actual output hour 6.0000
Add 10 per cent of cost of carriage to
cover cost of loading and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say

3% (percentage by weight of Aggregate) and waste plastic
additive @ 8% (percentage by weight of bitumen) prepared in
drum Type Hot Mix Plant of 60-90 TPH capacity.

MATERIAL
Waste Plastic @ 8% of the weigh of bitumen i.e. 24.75*8%
7280 Waste plastic additive tonne 1.9800

Aggregate
Volume of aggregate =425.25/1.5=283.50cum
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.57.7 40/50 mm compacted thickness with bitumen of grade PMB-

@ 3% (percentage by weight of Aggregate) prepared in drum

MATERIAL
312 Bitumen grade PMB - 40 M.T. 24.7500
Aggregate
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
76 Drum Type HMP of 60-90 TPH capacity @
75 tonne per hour actual output hour 6.0000
52 Front end loader 1 cum bucket capacity
(incl POL) hour 6.0000
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.57.8 40/50 mm compacted thickness with bitumen of grade CRMB-

@ 3% (percentage by weight of Aggregate) prepared in Drum

MATERIAL
Aggregate
Volume of aggregate =425.25/1.5 = 283.50cum
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
Qty = 85.05 * 50 /100
Qty = 85.05 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
12.758/1.29 = 9.89 cum
and unloading
(6*0.65)
LABOUR
128 Mate day 0.8400
construction

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.59 Manufacturing, supplying and fixing retro reflective sign
boards made up of 2 mm thick aluminium sheet, face to be
fully covered with high intensity encapsulated type heat
activated retro reflective sheeting conforming to type - IV of
ASTM-D 4956-01 in blue and silver white or other colour
combination including subject matter, message (bi-lingual),
symbols and borders etc. as per IRC ; 67:2001, pasted on
substrate by an adhesive backing which shall be activated by
applying heat and pressure conforming to class -2 of ASTM-D-
4956-01 and fixing the same with suitable sized aluminium
alloy rivets @ 20 cm c/c to back support frame of M.S. angle
iron of size 25x25x3 mm along with theft resistant measures,
mounted and
fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical

post made up to M.S. Tee section ISMT 50x50x6 mm welded
with base plate of size 100x100x5 mm at the bottom end and
including making holes in pipes, angles flats, providing & fixing
M.S. message plate of required size, steel work to be painted
with two or more coats of synthetic enamel paint of required
shade and of approved brand & manufacture over priming
coat of zinc chromate yellow primer (vertical MS-Tee support
to be painted in black and white colours).Backside of
aluminium sheet to be painted with two or more coats of
epoxy paint over and including appropriate priming coat
including all leads and lifts etc. complete as per drawing ,
16.59.1 Mandatory/ Regulatory sign boards of 900 mm diameter with

support length of 3750 mm
Details cost for 1 no. of 0.636 sqm
MATERIAL
Aluminium sheet 2 mm thick
3.14/4x(0.9)x(0.9)=0.636 sqm
add 10% wastage = 0.064 i.e. 0.700sqm
@ 5.60kg/ sqm = 3.92kg
2704 Aluminium Strip 40 mm wide and 2 mm thick kilogram 3.9200
3.92kg or 0.00392 MT
High intensity retro reflective sheet = 0.70 sqm.
High intensity sheet for lettering / sign and
border etc.
Taking 40% Area =0.28sqm,
total = 0.70 + 0.28 = 0.98 sqm
8690 High intensity retro - reflective sheet sqm 0.9800
Steel work
Supporting frame 25x25x3mm for 900mm dia board:-
3.14D=3.1416x0.90=2.83 metre
@ 1.10kg/m = 3.113 kg
Angle iron 35x35x.5mm for fixing the support frame with
vertical Tee-iron support post
2x0.05=0.10m
@ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@ 4.50kg/m = 16.88 kg
Bass plate to be welded at bottom end of tee (As hold fast)
(100x100x5mm)x7850/133)=0.39kg,
total = 3.11 + 0.26 +16.88 + 0.39 = 20.64
Total = 20.64 + 1.03 = 21.67kg.
LABOUR
128 Mate day 0.0100
9999 Cost of material for drilling holes, nut bolts & rivets, L.S. 65.0000
fabrication etc.
Painting with synthetic enamel paint on steel work
support frame 25x25x3mm
=2.83x0.10=0.283 sqm
Fixing angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.75x0.20=0.750sqm
Base plate 100x100x5mm
Surface area = 2x[0.10x0.10] =0.02
4x0.10x0.005 = 0.002
Total = 1.069 sqm
Painting with epoxy paint on back side of aluminium sheet.
9999 Sundries and hold fast etc. L.S. 78.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
16.59.2 Cautionary /warning sign boards of equilateral triangular

shape having each side of 900 mm with support length of
3650 mm

Details cost for 1 board of 0.35 sqm
MATERIAL
Aluminium sheet 2 mm thick
Area 1/2x(0.9)x(0.78)=0.35 sqm
add 10% wastage = 0.04
Total = 0.39 sqm
@ 5.60kg/ sqm = 2.18kg
2.18kg or 0.00218 MT
High intensity retro reflective sheet = 0.39 sqm.
High intensity sheet for lettering / sign/symbol/ border etc.
Taking 40% Area =0.16sqm,

total = 0.39 + 0.16 = 0.55 sqm
Steel work
Angle iron frame 25x25x3mm 3x0.90= 2.70 metre
@ 1.10kg/m = 2.97 kg
Angle iron 35x35x.5mm for fixing the support frame to Tee-
iron support post
2x0.05=0.10m
@ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 1x3.65=3.65m @
@ 2.6 kg/m = 0.26kg4.50kg/m =16.43kg
Bass plate 100x100x5mm connected to bottom end of vertical
tee.
(0.10x0.10x0.005x7850kg =0.39kg,
total = 2.97+ 0.26 + 16.43 + 0.39 = 20.05kg.
Add wastage @ 5% = 1.00,
total = 20.05 + 1.00 = 21.05kg
LABOUR
128 Mate day 0.0100
fabrication etc.
Painting with synthetic enamel paint on
support frame Angle 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
=1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of
Tee 100x100x5mm = 0.022 sqm
Total = 1.036 sqm
Painting with epoxy paint on back side of aluminium sheet.
0.35 sqm
9999 Sundries & hold fast etc. L.S. 65.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 board.
Say
16.60 Manufacturing, supplying and fixing retro reflective overhead

signage boards made up of 2 mm thick aluminium sheet, face
to be fully covered with high intensity and encapsulated lens
type heat activated retro reflective sheeting conforming to
type - III of ASTM-D-4956-01 as approved by Engineer-in-
charge, letters, borders etc. as per IRC : 67-2001 in silver
white with blue colour back ground and with high intensity
grade, pasted on substrate by pressure sensitive adhesive
backing which shall be activated by applying pressure
conforming to class II of ASTM-D-4956-01 and fixing the same
to the plate of
structural frame work by means of suitable sized aluminium
alloys, rivets or bolts & nuts @ 300 mm centre to centre all
along the periphery as well as in two vertical rows along with
theft resistant measures, including the cost of painting with
two or more coats of epoxy paint in grey colour on the back
side of aluminium sheet including appropriate priming coat.
The rate includes the cost of rounding off the corners,
lowering down the structural frame work from the gantry,
fixing and erecting the same in position all complete as per
drawings, specification and direction of the engineer-in-
charge.(Structural frame work including M.S. plate to be
provided separately. Rectangular area of the sheet only shall
be measured for payment).
16.60.1 Overhead informatory road signage

Details of cost for boards area 3.00x1.20 =3.60 sqm
MATERIAL
Total = 20.16 + 1.01 = 21.17 kg.
high intensity sheet for written matter.
Taking 40% 3.60x40% = 1.44 sqm.
Total = 3.60 + 1.44 = 5.04 sqm.
for peripheries = 2x(300+120)/30=28 nos.
For vertical Rows = 2x (120/30-2)=4 nos.
Total= 28 + 4 = 32nos.
For wastage @ 5% =2 nos.
Total = 32 +2 = 34 nos.
Labour charges for drilling holes
9999 Hire charges of drill machine and sundries L.S. 52.0000
9999 Hoisting board L.S. 390.0000
Labour charges for manufacturing of board including . fixing L.S. 564.2000
retro reflective sheet
Painting with epoxy paint on back side of Aluminium sheet,
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm.
Say
16.61 Providing Retro-reflective regulatory sign board of size 900

mm dia meter made out of 2 mm thick aluminium sheet, face
to be fully covered with high intensity encapsulated lens type
retro -reflective sheeting as approved by Engineer-in-charge .
Letter, symbols, borders etc. will be as per IRC - 67 with
required colour scheme on the boards and with the high
intensity grade A. The aluminium sheet to be riveted to M.S.
frame of angle iron of size 40x40x4 mm. The boards will be
fixed to 1 No. 50x50 mm square post made of M.S. angle
50x50x4 mm, 4 m long welded to the frame with adequate
anti-theft arrangement .Sheet work to be painted with two or
more coats of synthetic enamel paint over an under coat
(primer) and back side of aluminium sheet to be painted with
two or more coats of epoxy paint including appropriate
priming coat complete in all respects as per direction of
Engineer-in-charge.

Details cost for one board of 0.635 sqm
Aluminium sheet 2mm thick = 0.635 sqm.
Add 10% wastage = 0.06 sqm,
total = 0.635 + 0.06 = 0.695 sqm.
Say 0.70 sqm @ 5.6kg/sqm = 3.98 kg
MATERIAL
High intensity retro reflective sheet = 0.70 sqm
high intensity sheet for lettering/ sing and border etc.
Taking 40% Area=0.28 sqm,
total = 0.70 + 0.28 = 0.98 sqm.
Angle iron 40x40x4mm = 4x0.60=2.40
@ 2.4kg/ mtr = 5.76 kg
50x50x5 mm = 2x4m =8m
@ 3kg/ mtr=24.00 kg
Total = 5.76 + 24.00 = 29.76 kg
LABOUR
128 Mate day 0.0100
fabrication etc.
(e) Painting with synthetic enamel paint
1x2.40.12=0.29 sqm
1x4.00x0.12=0.80 sqm,
Total = 0.29 + 0.80 = 1.09 sqm
13.52.1 Painting with epoxy paint on back side of aluminium sheet, sqm 0.6350
Rate as per Item no. 13.52.1 of SH: Finishing
9999 Sundries & hole fast etc, L.S. 31.2000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 board
Say
16.62 Providing and applying 2.5 mm thick road marking strips

(retro- reflective) of specified shade/ colour using hot
thermoplastic material by fully/ semi automatic thermoplastic
paint applicator machine fitted with profile shoe, glass beads
dispenser, propane tank heater and profile shoe heater,
driven by experienced operator on road surface including cost
of material, labour, T&P, cleaning the road surface of all dirt,
seals, oil, grease and foreign material etc. complete as per
direction of Engineer-in-charge and accordance with
applicable specifications.

Details of cost for 200 sqm (Area covered on one day):-
MATERIAL
Thermoplastic paint screeded in paint form for 2.5 mm thick
road making stripe including glass beads etc. as per
specifications
200 sqm @ 5kg/ sqm = 1000 kg

Wastage @ 5% = 50kg
Total = 1050 kg
8687 Thermoplastic paint kg 1050.0000
Glass beads (B-class) to be sprayed over the paint stripe @
250 gms. Per sqm = 100x0.25=25 kg
8688 Glass beads kg 50.0000
MACHINERY
33 Paint applicator. day 1.0000
83 Hire charges of TATA 407 or equivalent
for local shifting. day 1.0000
1241 Commercial LPG in cylinder. kg 142.0000
LABOUR
157 Operator (Pile/ Special machine) day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 200 sqm
Cost per sqm
Say
16.63 Providing, laying and making kerb channel 30 cm wide and 50

mm thick with cement concrete 1:3:6 (1 cement: 3 coarse
sand:6 graded stone aggregate 20 mm nominal size) over
75mm bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand,
including finishing the top smooth etc. complete and as per

METERIAL
Labour for spreading, ramming and consolidation.
Cement concrete-1:3:6
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.64 Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading,
well ramming, consolidating and grouting with jamuna sand,
including finishing smooth etc. complete as per direction of
Engineer-in-charge.

METERIAL
Labour for spreading, ramming and consolidation.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.65 Providing and fixing post delineators made of ABS round body
fitted with 2 nos 100 mm dia high reflective reflectors and
mounted on MS pipe of 65 mm dia duly powder coated anti-
rust and anti theft steel to be installed as per direction of
Engineer-in-charge.

MATERIAL
8685 Delineator each 1.0000
9999 Fixing materials. L.S. 78.0000
9999 Fixing charges. L.S. 39.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
16.66 Excavating holes up to 0.10 cum, including getting out the

excavated soil, then returning the soil as deported in layers
not exceeding 20 cm in depth, including consolidating and
deposited layer by ramming watering etc., disposing of
surplus excavated soil as directed with in a lead of 50 mm and
lift up to 1.5 m.
16.66.1 All kind of soil

Earth work 30x0.10 = 3.0 cum.
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30 holes
Cost of 1 hole
Say
16.67 Providing and fixing at or near ground level factory made RCC
pavement slab of M-30 grade of size 450x450x50 mm,
including reinforcement with 6 mm dia M.S. bars 4 nos on
each side, including setting in position in footpath to the
required level and line over a bed of 20 mm average thick
cement mortar 1:5 (1 cement : 5 coarse sand), having joint
thickness not more than 5mm except on curve, including
filling of joints with same cement mortar and making grooves
etc. complete as per direction of Engineer-in- charge.

MATERIAL
8694 Precast pavement slab 450 x 450 x 50 mm (M - 30) each 48.0000
9977 Carriage of slab. L.S. 52.0000
20mm (bed and joints) CM. 1:5 (1 cement: 5 coarse sand)
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm
Say
16.68 Providing and laying 60mm thick factory made cement

concrete interlocking paver block of M -30 grade made by
block making machine with strong vibratory compaction, of
approved size, design & shape, laid in required colour and
pattern over and including 50mm thick compacted bed of
coarse sand, filling the joints with line sand etc. all complete
as per the direction of Engineer-in-charge.

MATERIAL
8689 Interlocking C.C. paver block ( 60 mm thick, M-30) sqm 10.0000
Bedding layer - 50mm thick
=10x0.050=0.50 cum
2203 Carriage of fine sand cum 0.1500
Laying charges (Based on actual observation)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.00 sqm
Cost for 1.00 sqm.
Say
16.69 Providing and laying at or near ground level factory made kerb
stone of M-25 grade cement concrete in position to the
required line, level and curvature, jointed with cement mortar
1:3 (1 cement: 3 coarse sand), including making joints with or
without grooves (thickness of joints except at sharp curve
shall not to more than 5mm), including making drainage
opening wherever required complete etc. as per direction of
Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).

Details of cost 100 metre i.e.
100x0.375x0.20=7.50 cum.
No. of kerb stones = 100/0.405=247 Nos
Precast C.C. Kerb stone M - 25 =
247x0.40x0.375x0.20=7.41 cum
METERIAL
8686 Precast C.C. Kerb stone M - 25 cum 7.4100
Mortar 1:3 for fixing joints =
246x1x[(0.115+0.20)/2] x 0.375x0.005 = 0.073 cum.
Labour for fixing of kerb stones
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7.50 cum
cost for 1 cum.
Say
16.70 Providing and fixing G.I. chain link fabric fencing of required
width in mesh size 50x50 mm including strengthening with 2
mm dia wire or nuts, bolts and washers as required complete
as per the direction of Engineer-in-charge.
16.70.1 Made of G.I. wire of dia 4 mm

MATERIAL
G.I. chain link 50x50 mm mesh = 10.00 sqm.
Total = 10.50 sqm.
8695 Chain link fabric fencing mesh of size 50x50 mm made of G.I. sqm 10.5000
wire of dia 4 mm
9977 Carriage. L.S. 156.0000
LABOUR
9999 Sundries including G.I. wire, nuts and bolts and washers. L.S. 174.7500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer
dia not less than 5 mm in required colour and shade

MATERIAL
G.I. chain link 50x50 mm mesh PVC coated = 10.00 sqm.
Total = 10.50 sqm.
wire of dia 4 mm, PVC coated to outer dia 5 mm
9977 Carriage. L.S. 156.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.71 Providing and fixing G.I. chain link fabric fencing of required
width in mesh size 25x25 mm made of G.I. wire of dia 3 mm
including strengthening with 2 mm dia wire or nuts, bolts and
washers as required complete as per the direction of
Engineer-in-charge.

MATERIAL
G.I. chain link 25x25 mm mesh = 10.00 sqm.
Total = 10.50 sqm.
wire of dia 3 mm
9977 Carriage. L.S. 156.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.72 Supplying and stacking of hard stone (for stone pitching) 22.5
cm thick at site.
Detail of cost for 2.25 cum
MATERIAL
22.5 cm thick stone (Hard)
1158 Stone for pitching 15 cm x 22.5 cm cum 2.2500
Carriage by mechanical transport i/c loading unloading and
stacking
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.25 cum
Cost for one cum
Say
16.73 Dry stone pitching 22.5 cm thick laid in courses and required
profile with hammer dressed stones having no side less than
15 cm, with minimum depth of 20 cm including preparing the
bedding surface etc. all complete. (Payment for Stone to be
made separately).

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for one sqm
Say
16.74 75 mm thick back filling for pitching including supplying of

required materials and consolidation etc. complete with :
16.74.1 Moorum
MATERIAL
810 Moorum cum 7.5000
Carriage by mechanical transport i/c loading unloading and
stacking
2265 Carriage of Moorum cum 7.5000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm
Cost per sqm
Say
16.74.2 Stone aggregate 20 mm nominal size

MATERIAL
100sqm x7.50cm= 7.50 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm
Cost per sqm
Say
16.74.3 Stone aggregate 40 mm nominal size

MATERIAL
100sqm x7.50cm= 7.50 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm
Cost per sqm
Say
16.75 Providing and laying C.C. pavement of mix M-25 with ready
mixed concrete from batching plant. The ready mixed
concrete shall be laid and finished with screed board vibrator ,
vacuum dewatering process and finally finished by floating,
brooming with wire brush etc. complete as per specifications
and directions of Engineer-in-charge. (The panel shuttering
work shall be paid for separately). (Note:- Cement content
considered in this item is @ 330 kg/cum. Excess/less cement
used as per design mix is payable/ recoverable separately).

MATERIAL
Ready mix concrete M 25 = 1.00 cum. i/c placing of concrete,
vibrating, levelling etc.
5.33.1.1 Rate as per Item No.5.33.1.1 of SH:RCC cum 1.0000
9999 Operational charges for vacuum dewatering system i/c screed L.S. 57.2000
vibration , placing of filter mat , top mat, vacuum process,
floating , trowelling, Brooming etc.
9999 T& P charges i/c consumable power charges, loading , L.S. 41.6000
unloading and hire charges of equipment
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
16.76 Deduct for using of M-20 grade concrete instead of M-25

grade concrete in C.C. pavement.
Cement for M-25 mix = 0.410 t
Cement for M - 20 mix = 0.383 t
Difference = 0.027 t
METERIAL
Plasticizer for M- 25 mix = 2.050kg
Plasticizer for M- 20 mix = 1.915 kg
Difference = 0.135 kg
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cum.
Say
16.77 Scarifying the existing bituminous road surface to a depth of

50 mm and disposal of scarified material within all lifts and
lead up to 1km (by mechanical means).

LABOUR
128 Mate day 0.0100
MACHINERY
38 Tractor with ripper attachment. day 0.0100
14 Front end loader capacity 1.00 cum day 0.0250
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 sqm
Cost for 1 sqm
Say
16.78 Construction of granular sub-base by providing close graded

Material conforming to specifications, mixing in a mechanical
mix plant at OMC, carriage of mixed material by tippers to
work site, for all leads & lifts, spreading in uniform layers of
specified thickness with motor grader on prepared surface
and compacting with vibratory power roller to achieve the
desired density, complete as per specifications and directions
16.78.1 With material conforming to Grade-I (size range 75 mm to

0.075 mm) having CBR Value-30
MATERIAL
Close graded granular sub-base material as
per Grading-I of specifications
53mm to 9.5mm @ 50% = 144 cum
9.5 mm to 2.36mm @ 20% = 57 cum
2.36mm below @ 30% = 86.40 cum

1179 Crushed stone 2.36 mm to 12.5 mm size cum 57.0000
Machinery/ Hire charges:
59 Wet Mix Plant 60 TPH hour 6.0000
@75 tonne capacity
57 Water Tanker 5 to 6 KL capacity hour 4.5000
5 km lead with one trip per hour
Tipper 10 tonne capacity( taking lead= 10 Km) = 450x10 =4500
tonne km
and unloading
50 Motor Grader 3.35 metre blade hour 6.0000
LABOUR
128 Mate day 0.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.78.2 With material conforming to Grade-II (size range 53 mm to

0.075 mm ) having CBR Value-25
MATERIAL
Close graded granular sub-base material as
per Grading-I of specifications
26.5mm to 9.5mm @ 35% = 100.80 cum
9.5 mm to 2.36mm @ 25% = 72 cum
2.36mm below @ 40% = 115.20 cum
@75 tonne capacity
Tipper 10 tonne capacity( taking lead= 10 Km) =450x10 =4500
tonne km
and unloading
LABOUR
128 Mate day 0.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.78.3 With material conforming to Grade-III (size range 26.5 mm to

0.075 mm ) having CBR Value-20
MATERIAL
Close graded granular sub-base material as per Grading-III of
specifications
9.5mm to 4.75mm @ 35% = 100.80 cum
4.75 mm to 2.36mm @ 12.5% = 36.00 cum
2.36mm below @ 52.5% = 151.20 cum
@75 tonne capacity
Tipper 10 tonne capacity( taking lead= 10Km) =450x10 =4500
tonne km
and unloading
LABOUR
128 Mate day 0.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.79 Providing, laying, spreading and compacting graded stone

aggregate (size range 53 mm to 0.075 mm ) to wet mix
macadam (WMM) specification including premixing the
material with water at OMC in for all leads & lifts, laying in
uniform layers with mechanical paver finisher in sub- base /
base course on well prepared surface and compacting with
vibratory roller of 8 to 10 tonne capacity to achieve the
desired density, complete as per specifications and directions

Details of cost for 225 cum (495 tonne)
MATERIAL
Conforming to table ……
45mm to22.4mm @ 30% = 89.10 cum
Qty for 0292,0293,0294,0295 codes =
89.10 / 4 = 22.275 cum
Qty for 2206, 2202 codes = 89.10 /2 = 44.55 cum
22.4 mm to 2.36mm @ 40% = 118.80 cum
Qty for 0294,0295 codes = 118.80 /4 = 29.70 cum
Qty for 1179 code = 118.80 /2 = 59.40 cum
2.36 mm to 75 micron @ 30% = 89.10 cum
Qty for 2903, 2904 codes = 89.10 / 2 = 44.55 cum

@75 tonne capacity
Tipper 10 tonne capacity( taking lead= 10 Km) =495x10 =4950
tonne km
and unloading
65 Paver finisher Mechanical 100 TPH hour 6.0000
LABOUR
128 Mate day 0.4800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.80 Construction of dry lean cement concrete sub base over a
prepared sub-grade with coarse and fine aggregate
conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per specifications,
cement content not to be less than 150 Kg/cum, optimum
moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at
7 days, mixed in a batching plant, transported to site, for all
leads & lifts, laid with a mechanical paver, compacting with 8-
10 tonne vibratory roller, finishing and curing etc. complete as
per direction of Engineer-in- charge.

Details of cost for 450 cum (990 tonne)
MATERIAL
Crushed stone coarse aggregate of 25mm & 12.5 mm nominal
sizes graded as per specifications @ 0.90 cum per cum of
concrete conforming to specification. = 405 cum
Coarse Sand @0.45 m3 per cum of concrete = 203 cum

Cement @150 Kg. per cum of concrete= 67.50 cum
Qty for 0294,0296 codes = 405 / 2 = 202.50 cum
@75 tonne capacity
66 Batching and Mixing Plant @ 75 cum
per hour hour 6.0000
65 Paver finisher Mechanical 100 TPH hour 6.0000
Tipper 10 tonne capacity (Taken 10km average lead) 990x10 =
9900 tonne km
and unloading
LABOUR
128 Mate day 1.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per cum.
Say
16.81 Providing and erecting 2.00 metre high temporary barricading

at site; each panel of size 2.50mx2.00m made of 40x40x6mm
angle iron or 50x50x3mm hollow MS tube posts/horizontal
members/bracings covered with 1.63mm thick MS sheet. The
sheet shall be fixed with 30x5mm MS flat by suitable
welding/riveting. The panels shall be made so that gap of
50cm above the ground is available making overall height as
2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be
provided at the bottom having oval shaped holes of size
50x25mm at both ends with 50cm long MS angle 40x40x6mm
bracing. Suitable arrangement shall be made to fix the
barricading to avoid from overturning by providing 250mm
long expansion fasteners at both ends. The work shall be

executed as per drawing/direction of Engineer- in-Charge
which includes writing and painting, arrangement for traffic
diversion such as traffic signals during construction at site for
day and night, glow lamps, reflective signs, marking, flags,
caution tape as directed by the Engineer-in-Charge. The
barricading provided shall be retained in position at site
continuously i/c shifting of barricading from one location to
another location as many times as required during the
execution of the entire work till its completion. Rate include
its maintenance for damages, painting, all incidentals, labour
materials, equipment and works required to execute the job.
The barricading shall not be removed without prior approval
(Note :- One time payment shall be made for providing
barricading from start of work till completion of work i/c
shifting. The barricading provided shall remain to be the
property of the contractor on completion of the work).

MATERIAL
16.81X Rate as per Sub Analysis No.16.81X metre 2.5000
16.81Y Rate as per Sub Analysis No.16.81Y metre 2.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.5 metre
Cost of 1 metre
Say
16.81X Sub analysis item for material component of Item No. 16.81

Details of cost for 2.5 meter
MATERIAL
M.S. Sheet 1.63mm thick = 1x2.50x2.00
= 5.00 sqm @ 12.80 kg/sqm = 64.00 kg
wastage @ 5%= 3.20 kg
Total = 67.20 kg
MS Angle - 40 x 40 x 6 mm
Outframe=2x(2.50+2.00)=9.00 m
Vertical extra = 2x0.300 = 0.60 m
Horizontal = 1x2.50 =2.50 m
Bracing = 2x3.20 = 6.40 m
Bracing at bottom = 2x0.50 = 1.00 m
Total = 19.50 m @ 3.50 kg/m = 68.25 kg +
wastage @ 5% = 3.14 kg
Total = 71.66 kg
M.S. Channel = 2x0.50 =1.00 m @
5.70 kg/m = 5.70 kg+
Total = 5.99 kg
M.S. Flat 30x5 mm
Horizontal = 2x2.50 = 5.00 m
Vertical = 2x2.00 = 4.00 m
Total = 9.00 m @ 1.20 kg/m = 10.80 kg +
Total = 11.34 kg
TOTAL
Add for maintenance @ 10% on P
Less for salvage value of material @ 50% on P
TOTAL
Assuming that material will become unserviceable after using
40 times, cost of 2.5 metre using once = S/40
Cost of 2.5 meter

Cost of 1 meter
Say
16.81Y Sub analysis item for fabrication charges of Item No. 16.81

Sub analysis item no.16.81Y to be used in Item No. 16.81

MATERIAL
Cutting, assembling and erection charges
LABOUR
9999 Sundries L.S. 12.1000
Labour for riveting / bolting / cutting etc.
9999 Sundries L.S. 12.1000
TOTAL
Shifting including transportation, re-erection etc. @ 10%
TOTAL Cost of 2.5 meter

Cost of 1 meter
Say
16.82 Taking out existing kerb stones of all types from footpath/
central verge, including removal of mortar etc., disposal of
unserviceable material to the dumping ground, for which
payment shall be made separately and stacking of serviceable
material within 50 metre lead as per direction of Engineer-in-
Charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 meter
Cost of 1 meter
Say
16.83 Taking out existing CC interlocking paver blocks from

footpath/ central verge, including removal of rubbish etc.,
disposal of unserviceable material to the dumping ground, for
which payment shall be made separately and stacking of
serviceable material within 50 metre lead as per direction of
Engineer-in- Charge.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
16.84 Laying old cement concrete interlocking paver blocks of any
design/ shape laid in required line, level, curvature, colour and
pattern over and including 50 mm thick compacted bed of
coarse sand, filling the joints with fine sand etc. all complete
as per the direction of Engineer-in-charge. (Old CC paver
blocks shall be supplied by the department free of cost).

MATERIAL
Bedding layer 50mm thick
Qty = 10 x 0.05 = 0.50 cum
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
16.85 Laying at or near ground level old kerb stones of all types in
position to the required line, level and curvature, jointed with
making joints with or without grooves (thickness of joints,
except at sharp curve, shall not be more than 5 mm),
including making drainage opening wherever required etc.
complete as per direction of Engineer-in-charge. (Length of
finished kerb edging shall be measured for payment). (Old
kerb stones shall be supplied by the department free of cost)

Details of cost for 100 meter.
MATERIAL
Number of kerb stones = 100 / 0.405= 247 Nos.
Qty. = 247 x 0.40 x 0.375 x 0.20 = 7.41cum
No. of joints = 247 - 1 = 246 Nos.
Cement Mortar 1:3 for fixing joints =
246 x[(0.115 + 0.20)/2 x 0.375 x 0.005] = 0.073 cum
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 meter.
Cost of 1 meter.
Say
16.86 Providing and laying gang saw cut 18 mm thick, mirror

polished pre moulded and pre polished machine cut granite
stone of required size and shape of approved shade, colour
and texture in footpath, flooring cut granite stone of required
size and shape of approved shade, colour and texture in
footpath, flooring in road side plazas and similar locations, laid
over 20mm thick base of cement mortar 1:4 (1cement : 4
coarse sand) including grouting the joints with white cement
mixed with matching pigment, epoxy touch ups etc. complete
as per direction of Engineer-in-Charge.
16.86.1 With granite stone of area less than 0.50 sqm.

Detail of cost for 0.5sqm.
Mirror polished granite 0.5 sqm.
Waste @5% = 0.025
Total = 0.025 +0.5 = 0.525 sqm.
7295 Granite of any colour, 18 mm thick (slab area up to 0.50 sqm) sqm 0.5250

LABOUR :
9999 Sundries L.S. 17.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.5 sqm
Cost per sqm.
Say
16.87 Providing and laying gang saw cut 30 mm thick, mirror

polished pre moulded and pre polished machine cut granite
stone of required size and shape of approved shade, colour
and texture in footpath, flooring in road side plazas and
similar locations, laid over 20mm thick base of cement mortar
1:4 (1 cement : 4 coarse sand) including grouting the joints
with white cement mixed with matching pigment, epoxy
touch ups etc. complete as per direction of Engineer-in-
Charge.
16.87.1 With granite stone of colour black, cherry/ruby red of area

less than 0.50 sqm.
MATERIAL
Mirror polished granite 0.50 sqm +
Waste @5% total = 0.025.
Total = 0.525 sqm
7296 Granite stone slab of colour Black, Cherry/Ruby Red 30mm sqm 0.5300
thick (slab area less than 0.5 sqm)
LABOUR :
9999 Sundries L.S. 17.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.5 sqm
Cost of 1 sqm
Say
16.87.2 With granite stone of all colour except black, cherry/ruby red
of area less than 0.50 sqm.
MATERIAL
Mirror polished granite 0.50 sqm +
Waste @5% total = 0.025.
Total = 0.525 sqm
7300 Granite stone slab of all colour except Black, Cherry/Ruby Red sqm 0.5300
30mm thick (slab area less than 0.5 sqm)

LABOUR :
9999 Sundries L.S. 17.6000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.5 sqm
Cost of 1 sqm
Say
16.88 Providing and laying matt finished vitrified tile of size

100x100x16mm having water absorption less than 0.5% and
conforming to IS: 15622 of approved make in all colours and
shades in out door floors such as footpath, court yard multi
models etc., laid on 20mm thick base of cement mortar 1:4
(1cement : 4 coarse sand) in all shapes & patterns including
grouting the joints with white cement mixed with matching
pigments etc. complete as direction of Engineer-in-Charge.

MATERIAL
Matt finished vitrified tile 100x100 x16mm
7895 Matt finished vitrified tile 100x100 x16mm sqm 1.0000
LABOUR :
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per sqm.
Say
16.89 Providing and laying matt finished vitrified tile of size

300x300x9.8mm having with water absorption less than 0.5%
and conforming to IS: 15622 of approved make in all colours
and shades in for outdoor floors such as footpath, court yard,
multi modals location etc., laid on 20mm thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns
including grouting the joints with white cement mixed with
matching pigments etc. complete as per direction of Engineer-
in-Charge.

MATERIAL
Tile 300x300 x9.8mm = 1.00 sqm.
7896 Vitrified tile sqm 1.0000
LABOUR :
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per sqm.
Say
16.90 Providing and laying tactile tile (for vision impaired persons as
per standards) of size 300x300x9.8mm having with water
absorption less than 0.5% and conforming to IS:15622 of
approved make in all colours and shades in for outdoor floors
such as footpath, court yard, multi modals location etc., laid
on 20mm thick base of cement mortar 1:4 (1 cement : 4
coarse sand) in all shapes & patterns including grouting the
joints with white cement mixed with matching pigments etc.
complete as per direction of Engineer-in- Charge.

MATERIAL:
Tile 300x300 x9.8mm = 1.00 sqm.
7893 Tactile tile sqm 1.0000
LABOUR :
9999 Sundries L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per sqm
Say
16.91 Providing and laying factory made chamfered edge Cement
Concrete paver blocks in footpath, parks, lawns, drive ways or
light traffic parking etc, of required strength, thickness & size/
shape, made by table vibratory method using PU mould, laid
in required colour & pattern over 50mm thick compacted bed
of sand, compacting and proper embedding/laying of inter
locking paver blocks into the sand bedding layer through
vibratory compaction by using plate vibrator, filling the joints
with sand and cutting of paver blocks as per required size and
pattern, finishing and sweeping extra sand. complete all as
16.91.1 60mm thick cement concrete paver block of M-35 grade with
approved colour, design & pattern.
MATERIAL :
7773 Coloured inter locking C.C. paver Block sqm 10.0000
982 Coarse sand (zone-III) cum 0.5000
2203 Carriage of coarse sand cum 0.5000
sand)
LABOUR
9999 Sundries L.S. 25.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm
Cost of 1 Sqm
Say
16.91.2 80 mm thick C.C. paver block of M-30 grade with approved

colour design and pattern.
MATERIALS :
8785 Interlocking C.C. paver block (80 mm thick, M-30) sqm 10.0000
982 Coarse sand (zone 111) (10 x 0.050 = 0.50 cum ) cum 0.5000
2261 Carriage of Fine sand cum 0.1500
Labour for Laying
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 Sqm
Cost of 1 Sqm
Say
16.92 Providing and fixing 10x10x7.50 cm Granite stone block hand

cut and chisel dressed on top, for paving in floors, drains etc.
laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse
sand) with joints 10mm wide filled with same mortar
including ruled pointing etc. complete as per direction of
engineer-in- charge.

MATERIALS :
Stone size 10x10x7.50cm =1sqm
7774 Stone size 10x10x7.50cm each 827.0000
LABOUR :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
16.93 Providing and placing in position 100 mm thick factory made

machine batched & machine mixed Precast RCC Rectangular
Covers on drains of footpath of various sizes, of M-25 grade
cement concrete for RCC work, including cost of centering,
shuttering, reinforcement of 8 mm dia TMT bars of Fe 500
grade @ maximum 100mm c/c on both ways , neat cement
punning on finished surface, properly encased on all edges
with 1.6 mm thick , 100 mm wide MS sheet duly painted over
priming coat , reinforcement to be welded at edges with MS
sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c
cost of cartage, all leads & lift, handling at site etc. all
complete as per direction of Engineer-in-Charge.

Details of cost of 1 No of size 1.50 x
0.40 = 0.60 sqm
MATERIALS :
Precast RCC M-25
CONCRETE
Reinforcement TMT
5.22.6 Rate as per Item No.5.22.6 of SH: REINFORCED CEMENT Kg 4.5900
CONCRETE
Welding by gas plant/ Electric plant
10.22 Rate as per Item No.10.22 of SH: STEEL WORK cm 82.0000
M.S. sheet 1.60 mm thick
2x(1.50+0.40)x0.10x0.016x7850=4.77kg
Paint 2x(1.50+0.40)x0.10=0.38sqm
Neat Cement Punning
1x1.50x0.40=0.60 sqm
13.18 Rate as per Item No.13.18 of SH: FINISHING sqm 0.6000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
16.94 Providing & making Gabion structure with Mechanically

Woven Double Twisted Hexagonal Shaped Wire mesh Gabion
Boxes as per IS 16014:2012,MORTH Clause 2500, of required
size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%)
Zinc coated, Mesh wire diameter 3.0 mm, mechanically
edged/selvedged with partitions at every 1m interval and shall
have minimum 10 numbers of openings per meter of mesh
perpendicular to twist, tying with lacing wire of diameter
2.2mm, supplied @ 3% by weight of Gabion boxes, filled with
boulders with least dimension of 200 mm, as per drawing, all

Details cost of one Gabion box/Crates of
size 2mx1mx1m = 2 cum
MATERIAL
8576 Crates made of Mesh type sqm 11.0000
10x12 (D=100 mm) Zn coated.
(Mesh wire diameter 3.00 mm).
Surface area required = 11.00 sqm.
7753 Stone boulder with least dimension 200mm cum 2.0000
2206 Carriage of boulder cum 2.0000
LABOUR
128 Mate day 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%)
Zinic+PVC coated, Mesh wire diameter2.7/3.7mm,
mechanically edged/selvedged with partitions at every 1m
interval and shall have minimum 10 numbers of openings per
meter of mesh perpendicular to twist, tying with lacing wire
of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of
Gabion boxes, filled with boulders with least dimension of 200
mm, as per drawing, all complete as per directions of
Engineer-in-charge.

MATERIAL
10x12 (D=100 mm) Zn+PVC coated.
Mesh wire diameter 2.70/3.70 mm (ID/OD).
LABOUR
128 Mate day 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
size, Mesh Type 10x12(D=100 mm with tolerance of ±2%),
Zinic+10% Al alloy+PVC coated, Mesh wire diameter
2.7/3.7mm (ID/OD), mechanically edged/selvedged with
partitions at every 1m interval and shall have minimum 10
numbers of openings per meter of mesh perpendicular to
twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD),
supplied @3% by weight of Gabion boxes, filled with boulders
with least dimension of 200 mm, as per drawing, all complete
as per directions of Engineer-in-charge.

MATERIAL
10x12 (D=100 mm) Zn+10% Al alloy+ PVC coated. Mesh wire
diameter 2.70/3.70 mm (ID/OD).
LABOUR
128 Mate day 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
17.1 Providing and fixing water closet squatting pan (Indian type
W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low
level white P.V.C. flushing cistern, including flush pipe, with
manually controlled device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete, including cutting
and making good the walls and floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests
Details of cost for one pan
MATERIAL
1954 Vitreous china orrisa type w.c. pan size 580 mm each 1.0000
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with each 1.0000
fittings, accessories and flush pipe)
1896 100 mm S.C.I. trap with vent heel each 1.0000
9999 Cement, sand and grit etc. L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size

585x480 mm with flush pipe and integrated type foot rests

MATERIAL
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan each 1.0000
724mm X 578mm
1896 100 mm S.C.I. trap with vent heel each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.2 Providing and fixing white vitreous china pedestal type water
closet (European type W.C. pan) with seat and lid, 10 litre low
level white P.V.C. flushing cistern, including flush pipe, with
manually controlled device (handle lever), conforming to IS :
7231, with all fittings and fixtures complete, including cutting
and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

MATERIAL
1875 White plastic seat (solid)with lid C.P.brass hinges and rubber each 1.0000
buffers
1955 Vitreous china pedestal type water closet each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid

MATERIAL
1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber each 1.0000
buffers
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.3 Providing and fixing white vitreous china pedestal type water
closet (European type) with seat and lid, 10 litre low level
white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I. brackets, 40 mm flush bend, overflow
arrangement with specials of standard make and mosquito
proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making
good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

MATERIAL
buffers
7006 Vitreous china 10 litres low level cistern with fittings each 1.0000
9999 Overflow arrangement and specials for overflow pipe L.S. 62.7900
1350 Mosquito proof coupling of approved design each 1.0000
9999 Plugs ,screws etc. L.S. 13.5200
9999 Red lead, white lead and gasket L.S. 16.1200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.3.2 W.C. pan with ISI marked black solid plastic seat and lid

MATERIAL
buffers
9999 Overflow arrangement and specials for overflow pipe L.S. 62.7900
9999 Plugs, screws etc. L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.4 Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing
cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of
fittings and brackets, cutting and making good the walls and
floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing
cistern
Details of cost for one no.
MATERIAL
1913 Vitreous china lipped front urinal each 1.0000
7359 P.V.C. automatic flushing cistern 5 lts capacity each 1.0000
7375 G.I. flush pipe and C.P. brass spreader including C.P. each 1.0000
connecting pipe Single lipped urinal
9999 Painting of fittings etc. L.S. 39.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern
MATERIAL
connecting pipe Range of two lipped urinals
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.4.3 Range of three urinal basins with 10litre white P.V.C.

automatic flushing cistern
MATERIAL
connecting pipe Range of three lipped urinals
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.4.4 Range of four urinal basins with 10 litre white P.V.C.

automatic flushing cistern
MATERIAL
connecting pipe Range of four lipped urinals
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.5 Providing and fixing white vitreous china flat back half stall
urinal of size 580x380x350 mm with white PVC automatic
flushing cistern, with fittings, standard size C.P. brass flush
pipe, spreaders with unions and clamps (all in C.P. brass) with
waste fitting as per IS : 2556, C.I. trap with outlet grating and
other couplings in C.P. brass, including painting of fittings and
cutting and making good the walls and floors wherever
required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern
MATERIAL
7379 White vitreous china clay half stall urinal flat back each 1.0000
580x380x350 mm or angle back 450x375x350 mm with waste
fittings as per IS : 2556

1532 Flush pipe with union spreaders and clamps all in C.P. brass each 1.0000
for single stall
1891 C.I. trap for standard urinal with vent arm with operating and each 1.0000
other couplings in C.P.brass: 50 mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic
flushing cistern
MATERIAL

for double stall
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic
flushing cistern
MATERIAL

for range of three stall
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic
flushing cistern
MATERIAL

for range of four stall
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.6 Providing and fixing one piece construction white vitreous

china squatting plate with an integral longitudinal flushing
pipe, white P.V.C. automatic flushing cistern, with fittings,
standard size G.I. / PVC flush pipe for back and front flush
with standard spreader pipes with fittings, G.I clamps and C.P.
brass coupling complete, including painting of fittings and
cutting and making good the walls and floors etc. wherever
required :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing

cistern
MATERIAL
1915 Vitreous china squatting plate urinal each 1.0000
1540 Flush pipe and spreaders G.I.for single set of one squatting each 1.0000
plate urinal
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic

flushing cistern
MATERIAL
1541 Flush pipe and spreaders G.I.for range of two squatting plates each 1.0000
urinal
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.6.3 Range of three squatting plates with 10 litre P.V.C. automatic

flushing cistern
MATERIAL
1542 Flush pipe and spreaders G.I.for range of three squatting each 1.0000
plates urinal
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic

flushing cistern
MATERIAL
1543 Flush pipe and spreaders G.I.for range of four squatting plates each 1.0000
urinal
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.
brass pillar taps, 32 mm C.P. brass waste of standard pattern,
good the walls wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair
of 15 mm C.P. brass pillar taps
MATERIAL
1947 Vitreous china flat back wash basin 630x450 mm each 1.0000
1885 15 mm C.P.brass tap each 2.0000
1951 C.P. brass waste 32 mm each 1.0000
1309 C.I. bracket for wash basin and sinks pair 1.0000
9999 Painting of brackets, fittings etc. L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.2 White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair
of 15 mm C.P. brass pillar taps
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.5 White Vitreous China Angle back wash basin size 600 x 480
mm with single 15mm C.P. brass pillar tap
1949 Details of cost for one no. MATERIAL each each 1.00
1885 Vitreous china angle back wash basin 600x480 mm 15 mm each pair 1.00
1951 C.P.brass tap L.S. 1.00
1309 C.P. brass waste 32 mm 1.00
9999 C.I. bracket for wash basin and sinks Red lead, white lead and 16.12
gasket

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.6 White Vitreous China Angle back wash basin size 400 x 400
mm with single 15 mm C.P. brass pillar tap
MATERIAL
1950 Vitreous china angle back wash basin 400x400 mm each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.7 White Vitreous China Flat back wash basin size 450x 300 mm
with single 15mm C.P. brass pillar tap
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.8 White Vitreous China Surgeon type wash basin of size
660x460 mm with a pair of 15 mm C.P. brass pillar
taps with elbow including operated levers

MATERIAL
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each 1.0000
7363 15 mm C.P. brass tap with elbow operation lever each 2.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.9 White Vitreous China Surgeon type wash basin of size

660x460 mm with single 15 mm C.P. brass pillar taps with
elbow operated levers ISI Marked

MATERIAL
7363 15 mm C.P. brass tap with elbow operation lever each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with

MATERIAL
7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X each 1.0000
355mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with

MATERIAL
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X each 1.0000
345mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia
CP Brass single hole basin mixer of approved quality and
make, including painting of fittings and brackets, cutting and
making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a

15 mm CP Brass single hole basin mixer
MATERIAL
9001 C.P. Brass Centre Hole Basin Mixer With Cast Spout each 1.0000
(Kigston/Marc/Prima/ Parko/Hindware)
9999 Cement, Sand and grit etc. L.S. 13.3900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.7B Providing and fixing wash basin with C.I. brackets, 15 mm

PTMT pillar cock, 32 mm PTMT waste coupling of standard
pattern, including painting of fittings and brackets, cutting and
making good the walls wherever required. White Vitreous
China Flat back wash basin size 550x400 mm with single 15
mm PTMT
pillar cock.

3229 MATERIAL
7491 PTMT pillar cock each 1.0000
1309 PTMT - Waste Coupling 31/32 mm each 1.0000
9999 Red Lead, White Lead and Gasket L.S. 16.1200
9999 Cement, sand and grit etc L.S. 13.3900
0116 LABOUR
Beldar day 0.6700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.8 Providing and fixing white vitreous china pedestal for wash
basin completely recessed at the back for the reception of
pipes and fittings.

Details of cost for one pedestal
MATERIAL
1396 Vitreous china pedestal for wash basin each 1.0000
9999 White cement mortar L.S. 40.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass
chain with rubber plug, 40 mm C.P. brass waste complete,
including painting the fittings and brackets, cutting and
making good the walls wherever required:
17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm

MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm each 1.0000
9999 Painting brackets etc. L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen
sink as per IS:13983 with C.I. brackets and stainless steel plug
40 mm, including painting of fittings and brackets, cutting and
making good the walls wherever required :
17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth 250 mm
MATERIAL
7095 Stainless steel kitchen sink - with drain board bowl depth 250 each 1.0000
mm.
9999 Painting of brackets etc. L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.1.2 510x1040 mm bowl depth 225 mm

MATERIAL
7096 Stainless steel kitchen sink - with drain board 510 x 1040mm each 1.0000
bowl depth 225 mm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.1.3 510x1040 mm bowl depth 200 mm

MATERIAL
7097 Stainless steel kitchen sink - with drain board 510 x 1040mm each 1.0000
bowl depth 200 mm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.1.4 510x1040 mm bowl depth 178 mm

MATERIAL
7098 Stainless steel kitchen sink - with drain board 510x1040mm each 1.0000
bowl depth 178 mm
9999 Painting brackets L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.2 Kitchen sink without drain board

17.10.2.1 610x510 mm bowl depth 200 mm
MATERIAL
7101 Stainless steel kitchen sink - without drain board 610x510mm each 1.0000
bowl depth 200 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.2.2 610x460 mm bowl depth 200 mm

MATERIAL
bowl depth 200 mm.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.10.2.3 470x420 mm bowl depth 178 mm

MATERIAL
bowl depth 178 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.11 Providing and fixing white vitreous china laboratory sink with
C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P
brass waste and 40mm C.P. brass trap with necessary C.P.
brass unions complete, including painting of fittings and
brackets, cutting and making good the wall wherever required
:
17.11.1 Size 450x300x150 mm

MATERIAL
1871 White vitreous china laboratory sink 450x300x150 mm each 1.0000
1895 C.P.brass trap40 mm dia each 1.0000
3617 C.P.brass union 40 mm dia each 1.0000
9999 Sundries L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.11.2 Size 600x450x200 mm

MATERIAL
1895 C.P.brass trap40 mm dia each 1.0000
3617 C.P.brass union 40 mm dia each 1.0000
9999 Sundries L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.12 Providing and fixing draining board with C.I. brackets including
painting of brackets, cutting and making good the walls
wherever required :
17.12.1 White glazed fire clay draining board of size 600x450x 25 mm

MATERIAL
7364 White glazed fire clay draining board 600x450x25 mm each 1.0000
9999 Painting brackets etc. L.S. 26.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.13 Providing and fixing white vitreous china water closet

squatting pan (Indian type) :
17.13.1 Long pattern W.C. pan of size 580 mm

MATERIAL
1953 Vitreous china Indian type w.c. pan size 580 mm each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.13.2 Orissa pattern W.C. pan of size 580x440 mm

MATERIAL
1954 Vitreous china orrisa type w.c. pan size 580 mm each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.14 Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1 Orissa pattern W.C. pan 580x440 mm

MATERIAL
Difference in cost of
7104 Coloured Orissa pattern W.C. pan 580x440 mm each 1.0000
1954 Vitreous china orrisa type w.c. pan size 580 mm each -1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.15 Providing and fixing white vitreous china pedestal type

(European type/ wash down type) water closet pan.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.16 Extra for using coloured pedestal type W.C pan (European
type) with low level cistern of same colour instead of white
vitreous china W.C pan and cistern.

MATERIAL
7105 Coloured Pedestal type W.C. pan 580x440 mm (European each 1.0000
type)
Deduct
1955 Vitreous china pedestal type water closet each -1.0000
7106 Coloured Vitreous china 10 lit. low level cistern each 1.0000
Deduct
7005 Vitreous china 10 litres low level cistern without fittings each -1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube
up to 1 metre long with S.S. triangular plate to European type
W.C. of quality and make as approved by Engineer - in -
charge.

1313 8 mm dia C.P. Brass/ S.S. Jet with flexible tube up to 1 metre each 1.0000
long with S.S. triangular plate
for European type W.C. (Hindware /Kingston /Prima
/Parko /Marc)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.17 Providing and fixing a pair of white vitreous china foot rests of
standard pattern for squatting pan water
17.17.1 250x130x30 mm
Details of cost for one pair
MATERIAL
9988 Cement, sand including carriage of materials L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 pair
Say
17.17.2 250x125x25 mm
Details of cost for one pair
MATERIAL
9988 Cement, sand including carriage of materials L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 pair
Say
17.18 Providing and fixing P.V.C. low level flushing cistern with
manually controlled device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete.
17.18.1 10 litre capacity - White

MATERIAL
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) each 1.0000
(with fittings, accessories and flush pipe)

LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.18.2 10 litre capacity - coloured

MATERIAL
7123 Coloured High density polyethylene/ poly propylene 10 lit. each 1.0000
(full flush) capacity controlled low level flushing cistern with
fittings

LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.19 Providing and fixing controlled flush, low level cistern made of
vitreous china with all fittings complete.
17.19.1 10 litre (full flush) capacity-white

MATERIAL
7126 White Vitreous china 10 lit. (full flush) capacity controlled low each 1.0000
level flushing cistern with all fittings
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.19.2 10 litre (full flush) capacity-coloured

MATERIAL
7127 Coloured Vitreous china 10 lit. (full flush) capacity controlled each 1.0000
low level flushing cistern with all fittings
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.2 Providing and fixing solid plastic seat with lid for pedestal type
W.C. pan complete :
17.20.1 White solid plastic seat with lid

MATERIAL
buffers
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.20.2 Black solid plastic seat with lid

MATERIAL
buffers
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.20.3 Coloured (other than black & white) solid plastic seat with lid

MATERIAL
7107 Coloured (other than black) solid P.V.C. seat in European W.C. each 1.0000
pan
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.22 Providing and fixing G.I. inlet connection for flush pipe
connecting with W.C. pan.
MATERIAL
1614 G.I. inlet connection each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineer-
in-charge.

MATERIAL
7121 Bottle Trap each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.22B Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia

MATERIAL
7122 CP Brass Single lever telephonic wall mixer of approved make each 1.0000
9977 L.S. 34.7100

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.23 Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of
430x260x350 mm or 340x410x265 mm sizes respectively.

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.24 Providing and fixing white vitreous china squatting plate urinal
with integral rim longitudinal flush pipe.
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.25 Providing and fixing white vitreous china wash basin including
making all connections but excluding the cost of fittings :
17.25.1 Flat back wash basin of size 630x450 mm

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.25.3 Angle back wash basin of size 600x480 mm

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.25.4 Angle back wash basin of size 400x400 mm
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.25.6 Surgeon type wash basin of size 660x460 mm

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.26 Providing and fixing kitchen sink including making all

connections excluding cost of fittings.
17.26.1 White glazed fire clay sink of size 600x450x250 mm

MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.27 Providing and fixing white vitreous china laboratory sink

including making all connections excluding cost of fittings :
17.27.1 Size 450x300x150 mm

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.27.2 Size 600x450x200 mm

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
MATERIAL
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia each 1.0000
with length not less than 700 mm i/c PVC waste fittings

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.28.1.2 40 mm dia
MATERIAL
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia each 1.0000
with length not less than 700 mm i/c PVC waste fittings

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.28.2 Flexible pipe
17.28.2.1 32 mm dia
MATERIAL
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin each 1.0000
32 mm dia with length not less than 700 mm i/c PVC waste
fittings

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.28.2.2 40 mm dia
MATERIAL
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin each 1.0000
40 mm dia with length not less than 700 mm i/c PVC waste
fittings

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.29 Providing and fixing 100 mm sand cast Iron grating for gully
trap.
MATERIAL
1369 S.C.I. gully or nahani grating 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.3 Providing and fixing in position 25 mm diameter mosquito

proof coupling of approved municipal design.

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.31 Providing and fixing 600x450 mm bevelled edge mirror of

superior glass (of approved quality) complete with 6 mm thick
hard board ground fixed to wooden cleats with C.P. brass
screws and washers complete.
MATERIAL
1392 Mirror of superior make glass 60x45 cm each 1.0000
7116 Hard board 6 mm thick sqm 0.2700
600x450 mm Wooden cleats
8.23 Rate as per item no 8.23 of SH : Cladding work each 4.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.32 Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic moulded
frame of approved make and shade with 6 mm thick hard
board backing :
17.32.1 Circular shape 450 mm dia

MATERIAL
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame each 1.0000
Hard board 0.45x0.45 = 0.2025 sqm

= 0.2228 sqm say 0.22sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.32.2 Rectangular shape 453x357 mm

MATERIAL
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded each 1.0000
frame
Hard board 0.453x0.357 = 0.1617 sqm
= 0.1779 sqm say 0.18 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.32.3 Oval shape 450x350 mm (outer dimensions)

MATERIAL
7114 Ovel shape 450x350 mm (outer dimensions) Mirror with each 1.0000
Plastic moulded frame
Hard board 0.45x0.35=0.1575 sqm
= 0.1733 sqm say 0.17 sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.32.4 Rectangular shape 1500x450 mm

MATERIAL
7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded each 1.0000
frame
Hard board 1.50x0.45 = 0.675 sqm
= 0.7425 sqm say 0.74sqm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.33 Providing and fixing 600x120x5 mm glass shelf with edges
round off, supported on anodised aluminium angle frame with
C.P. brass brackets and guard rail complete fixed with 40 mm
long screws, rawl plugs etc., complete.

MATERIAL
3228 600x120 mm glass shelf with anodised aluminium angle each 1.0000
frame, C.P. brass brackets and guard rail of standard size

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass
MATERIAL
1889 C.P.brass toilet paper holder of standard size each 1.0000
Wooden cleats
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.34.2 Vitreous china

Details of cost of one no.
MATERIAL
3749 Vitreous china toilet paper holder of standard size each 1.0000
Wooden cleats
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.35 Providing and fixing soil, waste and vent pipes :

17.35.1 100 mm dia
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729
(1.8mx10)-(9x0.07m) = 17.37 m
MATERIAL
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres each 10.5000
long: 100mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 17.37 m pan
Cost per metre
Say
17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per
IS: 3989
(1.75mx10)-(9x0.07m) = 16.87 m
MATERIAL
3620 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres each 10.5000
long:100mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per metre
Say
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated

inside & outside IS:15905
Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
7621 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - metre 18.5400
100 mm dia (3000 mm length pipe)
i/c (3% wastage)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729
(1.8mx10)-(9x0.065m) = 17.415 m say 17.42 m
MATERIAL
long:75mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per metre
Say
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989

(1.75mx10)-(9x0.065m) = 16.915 m. say 16.92 m
MATERIAL
3621 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres each 10.5000
long:75mm dia
including 5% allowance for wastage
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per metre
Say

Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
7622 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - metre 18.5400
75 mm dia (3000 mm length pipe)
i/c (3% wastage)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
17.36 Providing and filling the joints with spun yarn, cement slurry
and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I.
Pipes :
17.36.1 75 mm dia pipe

Details of cost for 4 joints
MATERIAL
9999 Cement mortar, spun yarn etc. L.S. 6.8900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4 joints
Cost of 1 joint
Say
17.36.2 100 mm dia pipe

MATERIAL
9999 Cement mortar, spun yarn etc. L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4 joints
Cost of 1 joint
Say
17.37 Providing and fixing M.S. holder-bat clamps of approved

design to Sand Cast iron/cast iron (spun) pipe embedded in
and including cement concrete blocks 10x10x10 cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size), including cost of cutting holes and making
good the walls etc. :
17.37.1 For 100 mm dia pipe

MATERIAL
1331 M.S.Holder bat clamp of approved design for 100 mm S.C.I. each 5.0000
pipe
LABOUR
128 Mate day 0.0002
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.37.2 For 75 mm dia pipe

MATERIAL
1332 M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe each 5.0000

LABOUR
C.C. Black 5x0.1x0.1x0.1 = 0.005 cum
128 Mate day 0.0002
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.38 Providing and fixing bend of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts
complete.
17.38.1 100 mm dia

17.38.1.1 Sand cast iron S&S as per IS - 1729
MATERIAL
1625 S.C.I. bend with access door 100mm dia each 1.0000
1374 Rubber insertions for 100 mm dia pipe joints each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3624 S.C.I. S&S bends with access door 100mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside &
outside as per IS:15905
Detail of cost for one no.
MATERIAL
7639 Hubless centrifugally cast (spun) iron bend with access door - each 1.0000
100 mm dia as per IS IS:15905
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.38.2 75 mm dia
MATERIAL
1624 S.C.I. bend with access door 75mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.38.2.2 Sand cast iron S&S as per IS- 3989

MATERIAL
3625 S.C.I. S&S bends with access door75mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7640 Hubless centrifugally cast (spun) iron bend with access door - each 1.0000
75 mm dia as per IS 15905 including cost of bolts & nuts.

3mm thick
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.39 Providing and fixing plain bend of required degree.

17.39.1 100 mm dia
MATERIAL
1621 S.C.I. plain bend 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.39.1.2 Sand cast iron S&S as per IS : 3989

MATERIAL
3628 S.C.I. S&S bend100mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
7623 Hubless centrifugally cast (spun) iron plain bend as per IS each 1.0000
15905 100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS -1729

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3629 S.C.I. S&S bend75mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
7624 Hubless centrifugally cast (spun) iron plain bend as per IS each 1.0000
15905 - 75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.4 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia

MATERIAL
1667 Sand cast iron heel rest bend 100mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3634 S.C.I. S&S heel rest sanitary bend 100mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.40.2 75 mm dia
MATERIAL
1666 Sand cast iron heel rest bend75mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3635 S.C.I. S&S heel rest sanitary bend 75mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.41 Providing and fixing double equal junction of required degree
with access door, insertion rubber washer 3 mm thick, bolts
and nuts complete :
17.41.1 100x100x100x100 mm
MATERIAL
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with each 1.0000
access door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3654 S.C.I. S&S double equal junctions with access door each 1.0000
100x100x100x100 mm.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.41.2 75x75x75x75 mm

MATERIAL
1636 S.C.I. double equal junctions75x75x75x75 mm dia with access each 1.0000
door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3655 S.C.I. S&S double equal junctions with access door each 1.0000
75x75x75x75 mm.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.42 Providing and fixing double equal plain junction of required

degree.
17.42.1 100x100x100x100 mm
MATERIAL
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
7625 Hubless centrifugally cast (spun) iron double equal plain each 1.0000
junction as per IS 15905 - 100x100x100x100 mm dia

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.42.2 75x75x75x75 mm

MATERIAL
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
7626 Hubless centrifugally cast (spun) iron double equal plain each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.43 Providing and fixing single equal plain junction of required

degree with access door, insertion rubber washer 3 mm thick,
bolts and nuts complete.
17.43.1 100x100x100 mm
MATERIAL
1631 S.C.I. single equal junctions 100x100x100 mm dia with access each 1.0000
door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3644 S.C.I. S&S single equal junctions with access door each 1.0000
100x100x100 mm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.43.2 75x75x75 mm

MATERIAL
1630 S.C.I. single equal junctions75x75x75 mm dia with access each 1.0000
door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3645 S.C.I. S&S single equal junctions with access door 75x75x75 each 1.0000
mm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.44 Providing and fixing single equal plain junction of required

degree :
17.44.1 100x100x100 mm
MATERIAL
1628 S.C.I. plain single equal junctions 100x100x100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3640 S.C.I. S&S single equal junctions 100x100x100 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7627 Hubless centrifugally cast (spun) iron single equal plain each 1.0000
junction as per IS 15905 - 100x100x100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.44.2 75x75x75 mm

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3641 S.C.I. S&S single equal junctions 75x75x75 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7628 Hubless centrifugally cast (spun) iron single equal plain each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.45 Providing and fixing double unequal junction of required

bolts and nuts complete:
17.45.1 100x100x75x75 mm
MATERIAL
1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 each 1.0000
mm dia with access door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3674 S.C.I. S&S double unequal junctions with access door each 1.0000
100x100x75x75 mm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.46 Providing and fixing double unequal plain junction of required

degree :
17.46.1 100x100x75x75 mm
MATERIAL
1659 Sand cast iron S&S plain double unequal junctions : each 1.0000
100x100x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7629 Hubless centrifugally cast (spun) iron double unequal plain each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.47 Providing and fixing single unequal junction of required

bolts and nuts complete :
17.47.1 100x100x75 mm
MATERIAL
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm each 1.0000
dia with access door.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3664 S.C.I. S&S single unequal junctions with access door each 1.0000
100x100x75 mm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.48 Providing and fixing single unequal plain junction of required

degree :
17.48.1 100x100x75 mm
MATERIAL
1653 Sand cast iron S&S plain single unequal junctions : each 1.0000
100x100x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7630 Hubless centrifugally cast (spun) iron single unequal plain each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.49 Providing and fixing double equal plain invert branch of

required degree:
17.49.1 100x100x100x100 mm
MATERIAL
1673 S.C.I. double equal invert branch of required degree each 1.0000
100x100x100x100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.49.1.2 Sand cast iron S&S as per IS 3989
MATERIAL
3685 S.C.I. S&S double equal invert branch of required each 1.0000
degree100x100x100x100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7631 Hubless centrifugally cast (spun) iron double equal plain invert each 1.0000
branch as per IS 15905 - 100x100x100x100 mm dia

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.49.2 75x75x75x75 mm

MATERIAL
1672 S.C.I. double equal invert branch of required degree each 1.0000
75x75x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3686 S.C.I. S&S double equal invert branch of required degree each 1.0000
75x75x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.5 Providing and fixing single equal plain invert branch of

required degree :
17.50.1 100x100x100 mm
17.50.1.1 Sand cast iron S&S as per iron 1729
MATERIAL
1670 S.C.I. single equal invert branch of required degree each 1.0000
100x100x100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3681 S.C.I. S&S single equal invert branch of required degree each 1.0000
100x100x100 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7632 Hubless centrifugally cast (spun) iron single equal plain invert each 1.0000
branch as per IS 15905 - 100x100x100 mm dia

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.50.2 75x75x75 mm

MATERIAL
1669 S.C.I. single equal invert branch of required degree75x75x75 each 1.0000
mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3682 S.C.I. S&S single equal invert branch of required degree each 1.0000
75x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7633 Hubless centrifugally cast (spun) iron single equal plain invert each 1.0000
branch as per IS 15905 - 75x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.51 Providing and fixing double unequal invert branch of required

degree :
17.51.1 100x100x75x75 mm
MATERIAL
1677 S.C.I. double unequal invert branch of required degree each 1.0000
100x100x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3695 S.C.I. S&S double unequal invert branch of required each 1.0000
degree100x100x75x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.52 Providing and fixing single unequal plain invert branch of

required degree :
17.52.1 100x100x75 mm
MATERIAL
1674 S.C.I. single unequal invert branch of required each 1.0000
degree100x100x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3690 S.C.I. S&S single unequal invert branch of required each 1.0000
degree100x100x75 mm dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7634 Hubless centrifugally cast (spun) iron single unequal plain each 1.0000
invert branch 45 degree as per IS 15905 - 100x100x75 mm dia

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.53 Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1 76 mm off sets

17.53.1.1 With 75 mm dia pipe
MATERIAL
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.53.2 114 mm off sets

MATERIAL
3712 S.C.I. S&S, 114 mm offset for75 mm dia pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.53.3 152 mm off sets

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.53A Providing and fixing Hubless centrifugally cast iron offsets

epoxy coated inside & outside as per IS:15905
17.53A.1 65 mm offsets
17.53A.1.1 With 100 mm dia pipe
MATERIAL
7635 Hubless centrifugally cast (spun) iron 65 mm offset with 100 each 1.0000
mm dia pipe as per IS 15905
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.53A.1.2 With 75 mm dia pipe
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.54 Providing and fixing sand cast iron S&S off sets as per IS:
3989 :
17.54.1 75 mm off sets

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.54.2 150 mm off sets

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.54A Providing and fixing Hubless centrifugally cast iron offsets

epoxy coated inside & outside as per IS:15905
17.54A.1 130 mm offsets
17.54A.1.1 With 100 mm dia

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.54A.1.2 With 75 mm dia

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.55 Providing and fixing door piece, insertion rubber washer 3mm
thick, bolts & nuts complete :
17.55.1 100 mm
MATERIAL
1683 S.C.I. door pieces 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3728 S.C.I. S&S door pieces 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.55.2 75 mm

MATERIAL
1682 S.C.I. door pieces 75 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3729 S.C.I. S&S door pieces 75 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.56 Providing and fixing terminal guard :
17.56.1 100 mm
MATERIAL
1640 Slotted cowl (terminal guard ) 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7641 Hubless centrifugally cast (spun) iron terminal guard (slotted each 1.0000
cowl) - 100 mm dia as per IS 15905
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.56.2 75 mm

MATERIAL
1639 Slotted cowl (terminal guard )75 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.57 Providing and fixing collar :
17.57.1 100 mm
MATERIAL
1686 S.C.I. collar 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3738 S.C.I. S&S, collars 100 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.57.2 75 mm

MATERIAL
1685 S.C.I. collar 75 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say

MATERIAL
3739 S.C.I. S&S, collars 75 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.57A Providing and fixing shielded coupling for Hubless

centrifugally cast iron pipe
17.57A.1 100 mm dia

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket
MATERIAL
7644 SS 304 grade shielded coupling with EPDM rubber gasket for each 1.0000
100 mm dia Hubless centrifugally cast (spun) iron

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.57A.2 75 mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket

MATERIAL
7645 SS 304 grade shielded coupling with EPDM rubber gasket for each 1.0000
75 mm dia Hubless centrifugally cast (spun) iron

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.58 Providing lead caulked joints to sand cast iron/centrifugally

cast (spun) iron pipes and fittings of diameter :
17.58.1 100 mm
Details of cost for one joint
MATERIAL
9999 Kerosene oil, fuel and other sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.58.2 75 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.58.3 50 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter :
17.59.1 100 mm
MATERIAL
1330 Clamps and M.S. stays including bolts and nuts for 100 mm each 1.0000
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.59.2 75 mm
MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.59.3 50 mm
MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.6 Providing and fixing trap of self cleansing design with screwed
down or hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and
floors :
17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989
MATERIAL
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm each 1.0000
outlet
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.60.1.2 Sand Cast Iron S&S as per IS: 1729

MATERIAL
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 1.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet each 1.0000
and 100 mm outlet as per IS 15905
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.60.2 100 mm inlet and 75 mm outlet

MATERIAL
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm each 1.0000
outlet
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.60.2.2 Sand Cast Iron S&S as per IS- 1729

MATERIAL
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
MATERIAL
7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet each 1.0000
and 75 mm outlet as per IS 15905
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.61 Cutting chases in brick masonry walls for following diameter

sand cast iron/centrifugally cast (spun) iron pipes and making
good the same with cement concrete 1:3:6 ( 1 cement : 3
coarse sand :6 graded stone aggregate 12.5 mm nominal size),
including necessary plaster and pointing in cement mortar 1:4
(1 cement : 4 coarse sand) :
17.61.1 100 mm dia

Details of cost for one metre
MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded
stone aggregate )
9999 Plastering in cement mortar 1:4 L.S. 10.4000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.61.2 75 mm dia
MATERIAL
stone aggregate )
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.61.3 50 mm dia
MATERIAL
stone aggregate )
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.62 Painting C.I. cistern with bitumastic or any other anti-

corrosive paint inside and white paint over a coat of zinc
chromate yellow primer (of approved quality ) on the outside
surface of the cistern, flush pipe, other fittings, etc. complete
for new work.

Details of cost for one cistern with fittings
MATERIAL
shade
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.63 Re-painting C.I. cistern with bitumastic or any other anti-

corrosive paint inside and white paint on the
outside surface of the cistern, flush pipe, other fittings, etc.
complete, including polishing of wooden seat and lid and
cleaning of W.C. pan with acid wherever necessary.

MATERIAL
shade
9999 Polishing of wooden seat and cleaning of W.C. pan with acid L.S. 20.6700
9988 Sundries and carriage of materials L.S. 7.1500

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.64 Repainting C.I. cistern with synthetic enamel paint of

approved colour, brand and manufacture on the outside
surface of cistern, flush pipe, other fittings etc. complete.

MATERIAL
shade
9988 Sundries and carriage of materials L.S. 3.6400
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil,
waste vent pipes and fittings with two coats of synthetic
enamel paint of any colour such as chocolate grey, or buff etc.
over a coat of primer (of approved quality) for new work :
17.65.1 100 mm diameter pipe

MATERIAL
Perimeter = 3.14x110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
Painting two coats with paint of any colour such as chocolate
grey or buff etc.
Rate as per item no 13.61.1 of SH : Finishing sqm 3.4600
Add for delay L.S. 17.1600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
MATERIAL
Perimeter = 3.14x110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
Painting two coats with paint of any colour such as chocolate
grey or buff etc.
Rate as per item no 13.61.1 of SH : Finishing sqm 2.6000
Add for delay L.S. 15.2100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron,
soil, waste, vent pipes and fittings with one coat of synthetic
enamel paint of any colour such as chocolate, grey or buff
etc :

Painting one coat with paint of any colour such as chocolate,
grey or buff etc.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 3.4600
9999 Add for delay L.S. 12.2200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Painting one coat with paint of any colour such as chocolate,
grey or buff etc.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
17.67 Repainting bath tub of size 1700x730x430 mm with enamel

paint.
Details of cost for one tub
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade 0.9000
9999 Sundries 6.7600
LABOUR
0131 Painter 0.2500
115 Coolie 0.2500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.68 Providing and fixing vitreous china dual purpose closet
suitable for use as squatting pan or European type water
closet (Anglo Indian W.C pan) with seat & lid fixed with C.P.
brass hinges and rubber buffers, 10 litre low level flushing
cistern with fitting and brackets, 40 mm flush bend, 20 mm
over flow pipe, with specials of standard make and mosquito
proof coupling of approved municipal design complete,
good the walls and floors wherever required:
17.68.1 White vitreous china dual purpose WC pan with white solid
plastic seat and lid with white vitreous china flushing cistern
and C.P. flush bend.

MATERIAL
buffers
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) each 1.0000
suitable for use as squatting pan or European type water
closet as per manufacturer's specifications
9999 20 mm G.I.over flow pipe and specials for over flow pipe L.S. 276.2500

9999 Plugs, screws etc. L.S. 59.1500
9999 Red lead, white lead and gaskin etc. L.S. 71.7600
9999 Cement, sand and grit L.S. 118.4300
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.69 Providing and fixing PTMT Waste Coupling for wash basin and
sink, of approved quality and colour.
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm
breadth weighing not less than 45 gms
MATERIAL
7491 PTMT Waste Coupling 31/32MM 1.0000
9988 Carriage of materials and fixing charges 20.2800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm

breadth, weighing not less than 60 gms
MATERIAL
7492 PTMT Waste Coupling 38/40MM 1.0000
9988 Carriage of materials and fixing charges 20.2800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and
sink.
17.70.1 Bottle trap 31mm single piece moulded with height of 270
mm, effective length of tail pipe 260 mm from the centre of
the waste coupling, 77 mm breadth with 25 mm minimum
water seal, weighing not less than 260 gms

MATERIAL
7493 PTMT Bottle Trap 31/32MM each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.70.2 Bottle trap 38 mm single piece moulded with height of 270

mm, effective length of tail pipe 260 mm from the centre of
the waste coupling, 77 mm breadth with 25 mm minimum
water seal, weighing not less than 263 gms

MATERIAL
7494 PTMT Bottle Trap 38/40MM each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.71 Providing and fixing PTMT liquid soap container 109 mm wide,
125 mm high and 112 mm distance from wall of standard
shape with bracket of the same materials with snap fittings of
approved quality and colour, weighing not less than 105 gms.

MATERIAL
7503 PTMT Liquid Soap Container of 400ml capacity each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.72 Providing and fixing PTMT towel ring trapezoidal shape 215
mm long, 200 mm wide with minimum distances of 37 mm
from wall face with concealed fittings arrangement of
approved quality and colour, weighing not less than 88 gms.

MATERIAL
7504 PTMT - Towel Ring 215x200x37mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.73 Providing and fixing PTMT towel rail complete with brackets
fixed to wooden cleats with CP brass screws with concealed
fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than
170 gms

MATERIAL
7505 PTMT Towel Rail (450mm) each 1.0000
Wooden cleats
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.73.2 600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than 190
gms.

MATERIAL
7506 PTMT Towel Rail (600mm) each 1.0000
Wooden cleats
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width
and 36 mm height of approved quality and colour, weighing
not less than 300 gms.

MATERIAL
7507 PTMT Shelf 450x124x36mm each 1.0000
Wooden cleats
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.75 Providing and fixing PTMT 15 mm Urinal spreader size

95x69x100 mm with 1/2" BSP thread and shapes, weighing
not less than 60 gms.

MATERIAL
7508 PTMT Urinal Spreader 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.76 Providing and fixing PTMT urinal cock of approved quality and
colour.
17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm
wide with BSP female threads weighing not less than 48 gms

MATERIAL
7858 P.T.M.T. Urinal cock 15mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.77 Providing and fixing M.S. holder bat clamp of approved design
to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat
brackets made of 50x5 mm flat of specified shape, projecting
75 mm outside the wall surface and fixed on wall with 4nos,
6mm dia expansion hold fasteners, including drilling necessary
holes in brick wall/ CC/ RCC surface and the cost of bolts etc.
The pipes shall be fixed to the already fixed brackets with the
help of 30 mm x1.6 mm galvanised M.S. flats of specified
shape and of total length 420 mm and shall be fixed with M.S.
nuts, bolts, & washers of size 25x6 mm, one bolts on each side
of the pipe.
17.77.1 Total bracket length 580 mm of approved shape and design

(for single 100 mm dia pipe)
MATERIAL
M.S. flats 50x5mm 5 x 0.58 = 2.90m
@ 1.97 kg/ metre = 5.71 kg.
M.S. flats 30x1.6mm 5x0.42 = 2.10m.
0.38kg/metre = 0.80kg.
Total = 6.51kg.
Add wastage 5% = 0.33kg.
Total = 6.86 kg.= 0.0686 quintal
LABOUR
priming coat
5x0.58x0.11 = 0.32
5x0.42x0.063 = 0.13
Total=0.45sqm
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20
nos.
8.8.1.1 Rate asper item no. 8.8.1.1 of SH :- Marble work each 20.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 Nos.
Cost of each
Say

(for two 100 mm dia pipes)
MATERIAL
M.S. flats 50x5mm 5 x 0.81 = 4.05m
@ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m.
Total = 9.58kg.
Total = 10.06 kg.
M.S.flats 10.06kg. = 0.1006 quintal
LABOUR
priming coat
5x0.81x0.11 = 0.45
5x2x0.42x0.063 = 0.26
Total =0.71sqm
nos.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 Nos.
Cost of each
Say

(for three 100 mm dia pipes)
MATERIAL
M.S. flats 50x5mm 5 x 1.04= 5.20m
@ 1.97 kg/ metre = 10.24 kg.
M.S. flats 30x1.6mm 5x3x0.42 = 6.30m.
Total = 12.63kg.
Total = 13.26 kg.
M.S.flats 13.26kg. = 0.1326 quintal
LABOUR
priming coat
5x1.04x0.11 = 0.57
5x3x0.42x0.063 = 0.40
Total=0.97sqm
nos.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 Nos.
Cost of each
Say
17.78 Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of approved
shape including providing & fixing white vitreous china cistern
with dual flush fitting, of flushing capacity 3 litre/ 6 litre
(adjustable to 4 litre/ 8 litres), including seat cover, and
cistern fittings, nuts, bolts and gasket etc complete.

MATERIAL
7072 Wall mounted water closet each 1.0000
7073 Adjustable Vitreous China Cistern with fittings each 1.0000
buffers
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.79 Providing & fixing white vitreous china water less urinal of size
600 x 330 x 315 mm having antibacterial /germs free ceramic
surface, fixed with cartridge having debris catcher and
hygiene seal.

MATERIAL
7074 White Vitreous China Waterless Urinal each 1.0000
7075 Cistern with fittings for Waterless Urinal each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.80 Providing and fixing white vitreous china battery based
infrared sensor operated urinal of approx. size 610 x 390 x 370
mm having pre & post flushing with water (250 ml & 500 ml
consumption), having water inlet from back side, including
fixing to wall with suitable brackets all as per manufacturers

MATERIAL
7076 White Vitreous Urinal each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
17.81 Providing and fixing floor mounted, white vitreous china

single piece, double traps syphonic water closet of approved
brand/make, shape, size and pattern including integrated
white vitreous china cistern of capacity 10 litres with dual
flushing system, including all fittings and fixtures with seat
cover, cistern fittings, nuts, bolts and gasket etc including
making connection with the existing P/S trap, complete in all
respect as per directions of Engineer-in-Charge.

MATERIAL
1966 Floor mounted, white vitreous china single piece, double traps each 1.0000
syphonic water closet of approved brand/make, shape, size
and pattern including integrated white vitreous china cistern
of capacity 10 litres with dual flushing system including all
fittings and fixtures with seat cover, cistern fittings, nuts, bolts
and gasket etc.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each
Say
18.1 Providing and fixing Polyethylene-Aluminium-Polyethylene

PE-AL-PE Composite Pressure Pipes conforming to IS - 15450,
U.V. stabilized with carbon black having thermal stability for
hot & cold water supply, capable to withstand temperature
up to 80°C, including all special fittings of composite material
(engineering plastic blend and brass inserts wherever
required) e.g. elbows, tees, reducers, couplers & connectors
etc., with clamps at 1.00 metre spacing. This includes testing
of joints complete as per direction of the Engineer-in-charge.
INTERNAL WORK - EXPOSED ON WALL
18.1.1 1216 (16 mm OD) pipe

MATERIAL
8300 1216 mm PE-AL-PE Composite pressure pipe metre 10.0000
Add 30% for fittings and wastage etc. on (P)
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1.2 1620 (20 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1.3 2025 (25 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1.4 2532 (32 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1.5 3240 (40 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1.6 4050 (50 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.2 Providing and fixing Polyethylene-Aluminium- Polyethylene
etc., with clamps at 1.00 metre spacing. This includes the
costs of cutting chases and including testing of joints complete
as per direction of the engineer in charge.
Concealed work, including cutting chases and making good
the wall etc.
18.2.1 1216 (16 mm OD) pipe

MATERIAL
Add 75% for fittings, clamps and wastage etc. on (P)
75 x P / 100
Making chases up to 7.5 x 7.5 cm. in walls and making good
the same
18.78 Rate as per item no. 18.78 of SH: Water Supply metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.2.2 1620 (20 mm OD) pipe

MATERIAL
75 * P / 100
the same
18.78 Rate as per item no. 18.78 of SH: water Supply metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.2.3 2025 (25 mm OD) pipe

MATERIAL
75 x P / 100
the same
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.2.4 2532 (32 mm OD) pipe

MATERIAL
75 x P / 100
the same
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3 Providing and fixing Polyethylene-Aluminium- Polyethylene
etc., with trenching, refilling and testing of joints complete as
per direction of the engineer in charge.
External work
18.3.1 1216 (16 mm OD) pipe

MATERIAL
30 x P / 100
LABOUR
Trenching and refilling etc.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3.2 1620 (20 mm OD ) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3.3 2025 (25 mm OD ) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3.4 2532 (32 mm OD ) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3.5 3240 (40 mm OD ) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.3.6 4050 (50 mm OD ) pipe

MATERIAL
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.4 Providing and fixing 3 layer PP-R (Poly propylene Random

copolymer) pipes confirming to IS 15801, UV stabilized & anti
- microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes testing of joints complete as
Internal Exposed on walls
18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

MATERIAL:
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.0000
(SDR 7.4) - 20 mm Outer dia
Add 30% for fittings, clamps and wastage etc. on P,

30xP/100
9999 Cement, Sand and grit L.S. 2.7300
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4)

MATERIAL:

30xP/100
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL

Cost of 10 metre
Cost of 1 metre
Say
18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4)

MATERIAL:

20xP/100
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.4.4 PN - 16 Pipe, 40mm OD (SDR-7.4)

MATERIAL:

15xP/100
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL

Cost of 10 metre
Cost of 1 metre
Say
18.4.5 PN - 10 Pipe, 50mm OD (SDR-11)

MATERIAL:
(SDR 11) - 50 mm Outer dia

15xP/100
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

copolymer) pipes confirming to IS:15801, UV
stabilized & anti - microbial fusion welded, having thermal
stability for hot & cold water supply, including all PP - R plain
& brass threaded polypropylene random fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This includes the cost of
cutting chases and making good the same including testing of
joints complete as per direction of Engineer-in-Charge.
the wall etc.
18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

MATERIAL:

75xP/100
the same
18.78 Rate as per Item Number 18.78 of SH: Water supply metre 10.0000
LABOUR:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4)

MATERIAL:

75xP/100
the same
LABOUR:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4)

MATERIAL:

50xP/100
the same
LABOUR:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

copolymer) pipes confirming to IS:15801 UV stabilized & anti -
microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, including trenching, refilling &
testing of joints complete as per direction of Engineer-in-
Charge.
External work
18.6.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

MATERIAL:
Add 20% for fittings and wastage etc. on P, 20xP/100

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL

Cost of 10 metre
Cost of 1 metre
Say
18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4)

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4)

MATERIAL:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4)

MATERIAL:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11)

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11)

MATERIAL:

LABOUR:
0115 coolie day 0.6600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.7 PN - 10 Pipe, 75 mm OD (SDR-11)

MATERIAL:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL

Cost of 10 metre
Cost of 1 metre
Say
18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11)

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11)

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6.10 PN - 10 Pipe, 160 mm OD (SDR-11)

Code ` Unit Quantity
MATERIAL:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.6A Providing and fixing PPR Unions
18.6A.1 PPR Union 20mm
MATERIAL:
8306 PPR Union 20mm each 1.0000
9999 Carriage of materials and sundries L.S. 1.8200
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL

Cost of 1 No
Say

MATERIAL:
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.1 15 mm nominal dia Pipes

MATERIAL
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal metre 10.0000
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in
Charge.
the walls etc.

MATERIAL
dia.
75 x P / 100
the same
18.78 Rate as per item no. 18.78 Of SH: Water Supply metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
75 x P / 100
the same
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
75 x P / 100
the same
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
75 x P / 100
the same
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings This includes
jointing of pipes & fittings with one step CPVC solvent cement,
trenching, refilling & testing of joints complete as per
direction of Engineer in Charge.
External work

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia.
30 x P / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.1 Providing and fixing G.I. pipes complete with G.I. fittings and
clamps, i/c cutting and making good the
walls etc.

18.10.1 15 mm dia nominal bore
MATERIAL
Weight for carriage = pipe weight + 15% for fittings =
1.15 *12.30 = 14.145 kg = 0.014145 tonne
9999 White lead, hemp, oil etc. L.S. 8.0600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *15.90= 18.285 kg = 0.018285 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *24.60 = 28.29 kg = 0.02829 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *31.70 = 36.455 kg = 0.036455 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *36.50 = 41.975 kg = 0.041975 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *51.70 = 59.455 kg = 0.059455 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and
clamps, i/c making good the walls etc. concealed pipe,
including painting with anti corrosive bitumastic paint, cutting
chases and making good the wall :

MATERIAL
1.15 *12.30 = 14.145 kg = 0.014145 tonne
Painting G.I. pipe with anti-corrosive bitumastic paint two or
more coats
18.40.1 (Rate same as per item no. 18.40.1) metre 10.0000
Making chases up to 7.5x7.5cm in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH Water Supply metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.15 *15.90= 18.285 kg = 0.018285 tonne
Painting G.I. pipe with anti-corrosive bitumastic paint two or
more coats
18.40.2 (Rate same as per item no. 18.40.2 Of SH Water Supply) metre 10.0000
Making chases up to 7.5x7.5cm in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH Water Supply metre 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.12 Providing and fixing G.I. pipes complete with G.I. fittings
including trenching and refilling etc. External work

MATERIAL
1.02 * 12.30 = 12.546 kg = 0.012546 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 15.90 = 16.218 kg = 0.016218 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 24.60 = 25.092 kg = 0.025092 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 31.70 = 32.334 kg = 0.032334 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 36.50 = 37.23 kg = 0.03723 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 51.70 = 52.73 kg = 0.05273 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 66.30 = 67.626 kg = 0.067626 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
1.02 * 86.40 = 88.128 kg = 0.088128 tonne
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.13 Making connection of G.I. distribution branch with G.I. main
of following sizes by providing and fixing tee, including cutting
and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore

Details of cost for one connection.
Take 25mm dia as an average size.
MATERIAL
1608 G.I. tees (equal) 25 mm each 1.0000
1555 G.I. back (jam) nuts 25 mm dia each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one connection
Say
18.13.2 50 to 80 mm nominal bore

Details of cost for one connection.
Take 65mm dia as an average size.
MATERIAL
1612 G.I. tees (equal) 65 mm each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one connection
Say
18.14 Fixing water meter and stop cock in G.I. pipe line including
cutting and threading the pipe and making long screws etc.
complete (cost of water meter and stop cock to be paid
separately).

Details of cost for one meter with stop cock
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one metre with stop cock
Say
18.15 Providing and fixing brass bib cock of approved quality :
18.15.1 15 mm nominal bore

MATERIAL
1339 Brass bib-cock 15 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
1340 Brass bib-cock 20 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.16 Providing and fixing brass stop cock of approved quality :

MATERIAL
1342 Brass stop-cock 15 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
1343 Brass stop-cock 20 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.17 Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :

MATERIAL
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.17.1A 20 mm nominal bore

MATERIAL
1926 20 mm dia Gunmetal gate valve with wheel each 1.0000
9977 Carriage of material and fixing charge L.S. 9.4900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No.
Say
18.17.2 32 mm nominal bore.

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.18 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

MATERIAL
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19 Providing and fixing gun metal non- return valve of approved
quality (screwed end) :

18.19.1.1 Horizontal
MATERIAL
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm each 1.0000
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.1.2 Vertical
MATERIAL
3080 Gunmetal non-return valve-vertical (screwed end) 25 mm dia each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
MATERIAL
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.2.2 Vertical
MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
MATERIAL
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.3.2 Vertical
MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
MATERIAL
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.4.2 Vertical
MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
MATERIAL
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.5.2 Vertical
MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
MATERIAL
dia
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.19.6.2 Vertical
MATERIAL

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.2 Providing and fixing brass ferrule with C.I. mouth cover
including boring and tapping the main :

MATERIAL
1360 C.I.mouth, brass ferrule 15 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.21 Providing and fixing uplasticised PVC connection pipe with

brass unions :
18.21.1 30 cm length
18.21.1.1 15 mm nominal bore
MATERIAL
1687 Unplasticised P.V.C.connection pipe with brass union 30 cm each 1.0000
long 15 mm bore
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
long 20 mm bore
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.21.2 45 cm length

MATERIAL
long 15 mm bore
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
long 20 mm bore
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm

inlet :

MATERIAL
1878 Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

MATERIAL
1879 Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia each 1.0000

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.23 Laying in position centrifugally cast (spun) iron S&S or flanged

pipes (excluding cost of pipe).
Details of cost for 5.14 quintal
10 m of 200 mm dia C.I. pipe class 'A'
Weight = (2x257) = 514kg = 5.14 quintal
LABOUR for laying pipe
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Say
18.24 Laying in position S&S or flanged C.I. special such as tees,

bends, collars, tapers and caps etc.(excluding cost of specials).

10 Nos. Tee 200x150mm Weight = 70x10 = 700kg.
LABOUR for laying tee-
9999 Sundries L.S. 40.1700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 quintal
Cost of one quintal
Say
18.25 Providing and laying S&S C.I. standard specials such as tees,
bends, collars, tapers, caps etc. (Heavy class):
18.25.1 Up to 300 mm dia

MATERIAL
1464 S & S.C.I.standard specials up to 300 mm dia (heavy class) quintal 1.0000
2309 Carriage of Cast iron fittings tonne 0.1000

LABOUR
18.24 Rate as per item No. 18.24 Of SH: Water Supply quintal 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one quintal
Say
18.25.2 Over 300 mm dia

MATERIAL
1466 S & S.C.I.standard specials over 300 mm dia (heavy class) quintal 1.0000

LABOUR
For laying
18.24 Rate as per item No. 18.24 Of SH: Water Supply quintal 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one quintal
Say
18.26 Providing and laying flanged C.I. standard specials such as

tees, bends, collars, tapers, caps etc., suitable for flanged
jointing as per IS : 1538 :
18.26.1 Up to 300 mm dia

MATERIAL
1468 Flanged C.I. standard specials up to 300 mm dia (heavy class) quintal 1.0000

LABOUR
For laying
18.24 Rate as per item No. 18.24 of SH: Water Supply quintal 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one quintal
Say
18.26.2 Over 300 mm dia

MATERIAL
1470 Flanged C.I. standard specials over 300 mm dia (heavy class) quintal 1.0000

LABOUR
For laying
18.24 Rate as per item No. 18.24 of SH: Water Supply quintal 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one quintal
Say
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes
(Class LA) conforming to IS - 1536 :
18.27.1 100 mm dia pipe

MATERIAL
100mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 19.820 Kg
Weight of 10m pipes 19.820x10 = 198.20 Kg
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia metre 10.0000
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.1000
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 1.9800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.2 125 mm dia pipe

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.3 150 mm dia pipe

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.4 200 mm dia pipe

MATERIAL
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.5 250 mm dia pipe

MATERIALS
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.6 300 mm dia pipe

MATERIAL
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.7 350 mm dia pipe

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.8 400 mm dia pipe

MATERIAL
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.9 450 mm dia pipe
MATERIAL
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost of one metre
Say
18.27.10 500 mm dia pipe

MATERIAL
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.27.11 600 mm dia pipe

MATERIAL
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.1000
LABOUR for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.28 Providing lead caulked joints to spun iron or C.I. pipes and
specials, including testing of joints but excluding the cost of
pig lead :

MATERIAL
0.17x 10 =1.70 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.20x10=2.00 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.23x10=2.30 kg
9999 Sundries L.S. 10.7900
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.3x10=3.00 kg
9999 Sundries L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.4x10=4 00 kg
9999 Sundries L.S. 17.5500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.54x10 =5.40 kg
9999 Sundries L.S. 20.2800
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.62x10=6.20 kg
9999 Sundries L.S. 24.1800
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.74x10=7.40 kg
9999 Sundries L.S. 26.9100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.79x10=7.90 kg
9999 Sundries L.S. 31.0700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
0.85x10=8.50 kg
9999 Sundries L.S. 33.6700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say

MATERIAL
1.02x10=10.20 kg
9999 Sundries L.S. 40.3000
LABOUR
0114 Beldar day 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost of one joint
Say
18.29 Supplying pig lead at site of work.

MATERIAL
2341 Carriage of Pig lead tonne 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one quintal
Say
18.3 Providing flanged joints to double flanged C.I./ D.I. pipes and
specials, including testing of joints :

MATERIAL
1956 Bolts and nuts 16 mm dia 60 mm long each 40.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 joints
Cost for one joint
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 joints
Cost for one joint
Say
18.31 Providing and fixing C.I. sluice valves (with cap) complete with
bolts, nuts, rubber insertions etc. (the tail pieces if required
will be paid separately) :

18.31.1.1 Class I
Details of cost for 10 sluice valves
MATERIAL
1940 C.I.sluice valve (with caps) class I : 100 mm dia each 10.0000
Carriage of sluice valves
wt.= 44.3x10=443kg= 0.443t. say 0.44t
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 4.4300
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
18.30.2 (Rate as per item No.18.30.2 Of SH: Water Supply) each 20.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.1.2 Class II
MATERIAL
3311 C.I.sluice valve (with caps) class II : 100 mm dia each 10.0000
56.3x10=563kg= 0.563t=0.56t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.2.1 Class I
MATERIAL
wt. = 56.3x10=563kg = 0.563t. say 0.56t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.2.2 Class II
MATERIAL
wt. = 68.3x10=683kg = 0.68t say 0.68t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.3.1 Class I
MATERIAL
wt. = 72.5x10=725kg = 0.725t. say 0.72t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.3.2 Class II
MATERIAL
wt. = 86.5x10=865kg = 0.865t. say 0.865t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.4.1 Class I
MATERIAL
wt. = 121.5x10=1215kg = 1.215t. say 1.22t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.4.2 Class II
MATERIAL
wt. = 150.5x10=1505 kg = 1.5 t. say 1.5 t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.5.1 Class I
MATERIAL
wt. = 179.9x10=1799kg = 1.799t. say 1.80t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.5.2 Class II
MATERIAL
wt. = 229.9x10=2299kg = 2299t. say 2.30t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.6.1 Class I
MATERIAL
wt. = 242.4x10=2424kg = 2.424t. say 2.42t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.31.6.2 Class II
MATERIAL
wt. = 303.4x10=3034kg = 3.304t. Say 3.03 tonne.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick

work in cement mortar 1:4 (1 cement :4 coarse sand) for stop
cock, with C. I. surface box 100x100 x75 mm (inside) with
hinged cover fixed in cement concrete slab 1:2:4 mix (1
nominal size), i/c necessary excavation, foundation concrete
1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate
40mm nominal size ) and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished
with a floating coat of neat cement complete as per standard
design :
18.32.1 With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5
Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including refilling and disposal of
surplus earth
0.68x0.68x0.65m=0.301cum.
2.25 Rate as per item No.2.25 cum 0.3000
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10
0.68x0.68x0.075m=0.035cum. Say 0.04 cum.
(iii) Second class brick work in cement mortar 1:4 (1 Cement :
4 coarse sand) in foundations and plinth
1.66mx0.115x0.50m=0.095cum.
Say 0.10 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.1000
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
1.20x0.50=0.60sqm
0.30x0.30=0.09sqm.
Total =0.69sqm. Say 0.70sqm.
1304 Surface box for stop cock each 1.0000
(vi)
9977 Carriage of C.I. surface box L.S. 1.4300
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4
graded stone aggregate 20mm nominal size) in slab =
0.53mx0.53mx0.075m = 0.02107cum.
Less surface box 0.112x0.112x0.076 =(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
5.3 Rate as per item No.5.3 SH : R.C.C cum 0.0200
(viii) Less labour for not lifting the materials up to floor five
level
0115 Coolie day -0.0380
(ix)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say

work in cement mortar 1:4 (1 cement : 4 coarse sand) for
sluice valve, with C.I. surface box 100mm top diameter, 160
mm bottom diameter and 180 mm deep ( inside) with chained
lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size ) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick, finished with a floating coat of neat
cement complete as per standard design :

designation 7.5
MATERIAL
surplus earth
1.21x1.21x1.00m=1.464cum.
Say 1.46 cum.
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
(iii) Second class brick work in cement mortar 1: 4(1 Cement :
4coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
2.40x0.75=1.80sqm.
0.60x0.60=0.36sqm.
Total = 2.16sqm.
(v) C.I. surface box with hinged cover
100x100x75mm (inside)
1305 Surface box for sluice valve each 1.0000
(vi)
9977 Carriage of C.I. surface box L.S. 8.0600
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xd2x0.18m --
0.7854x0.156mx0.156mx0.18 = (-)0.0034 cum.
= 0.1651 cum. Say 0.17 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.1700
level
0115 Coolie day -0.3200
(ix) Mild steel reinforcement for RCC work etc.
0.165cum.x80kg/cum. = 13.2kg
(x) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 0.8600
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say

sluice valve, with C.I. surface box 100 mm top diameter, 160
mm bottom diameter and 180 mm deep (inside) with chained
lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size ), i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size ) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse

designation 7.5
MATERIAL
surplus earth
1.51X1.51X1.25 m = 2.85cum.
1.51x1.51x0.1m=0.228cum. Say 0.23 cum.
(iii) Second class brick work in cement foundations and plinth
foundations and plinth
4.52mx0.23mx1.00m=1.04cum.
3.60mx1.00m=3.60sqm
0.90mx0.90m
=0.81sqm.
Total=4.41sqm.
(v) C.I. surface box with chained lid.
9977 (vi) Carriage of C.I. surface box L.S. 8.0600
graded stone aggregate 20mm nominal size) in slab =
1.36mx1.36mx0.15m = 0.2774 cum.
Less surface box 0.7854x0.156mx0.156mx
0.18m = (-)0.0034 cum.
= 0.2740 cum. Say 0.27 cum.
level
0115 Coolie day -0.5100
0.274cum.x80kg/cum. = 21.92 kg.
(x) Form work
0.90mx0.90m=0.81sqm.+
4.52mx0.15m = 0.68 sqm.
Total= 1.49 sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
18.35 Constructing masonry Chamber 120x120x100 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
for sluice valve, with C.I. surface box 100 mm top diameter,
160 mm bottom diameter and 180 mm deep ( inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete 1:5:10 (1 cement :
5 fine sand : 10 graded stone aggregate 40 mm nominal size)
and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat
cement complete as per
standard design :

designation 7.5
MATERIAL
surplus earth
1.81X1.81X1.25M
1.81x1.81x0.1m=0.328cum. Say 0.33 cum.
4coarse sand) in foundations and plinth
5.72mx0.23mx1.00m=1.316cum.
Say 1.32 cum.
4.80mx1.00m=4.80sqm.
1.20mx1.20m=1.44sqm.
Total=6.42sqm.
(v) C.I. surface box with chained lid
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4
in slab = 1.66mx1.66mx0.15m = 0.4133 cum.
Less surface box 0.7854x0.156mx
0.156mx0.18m = (-)0.0034 cum.
Total= 0.4099 cum. Say 0.41 cum.
level
0115 Coolie day -0.7700
(ix) Mild steel reinforcement for RCC slab steel @ 80kg/cum.
0.41cum.x80kg/cum. = 32.80kg.
(x) Form work
1.20mx1.20m=1.44sqm.+
5.72mx0.15m=0.86 sqm.
Total = 2.30sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
18.36 Constructing masonry Chamber 60x60x75 cm, inside in brick

work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire
hydrants, with C.I. surface box 350x350 mm top and 165 mm
deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1
nominal size) , i/c necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40
mm nominal size) and inside plastering with cement mortar
1:3 (1 cement : 3 coarse

designation 7.5
MATERIAL
surplus earth
1.21X1.21X1.00m = 1.464cum. Say 1.46cum.
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
4
coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
2.40mx0.75m=1.80sqm.
0.90mx0.90m =0.36sqm.
Total=2.16sqm.
(v) C.I. surface box with chained lid
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 0.61x0.41mx0.15m=
(-)0.0375 cum.
= 0.131 cum. Say 0.13 cum.
level
0115 Coolie day -0.2400
0.131cumx80kg/cum. = 10.48kg.
(x) Form work
0.60mx0.60m=0.36sqm.+
3.32mx0.15m = 0.50 sqm.
Total =0.86 sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say

water meter complete with C.I. double flap surface box
400x200x200 mm (inside) with locking arrangement and RCC
top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) , i/c necessary excavation,
foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded
stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm
thick, finished with a floating coat of neat cement complete as
per standard design :

designation 7.5
MATERIAL
surplus earth
1.21X1.06X0.85m = 1.09cum.
1.21x1.06x0.1m=0.128cum. Say 0.13 cum.
4 coarse sand) in foundations and plinth
3.02mx0.23mx0.50m=0.347cum.
Say 0.35 cum.
2.10mx0.50m=1.05sqm.
0.60mx0.45m=0.27sqm.
Total=1.32sq
(v) C.I. surface box 400x200x200mm (inside) with locking
arrangement
1307 Surface box for water meter each 1.0000
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m
= (-)0.018 cum.
= 0.223 cum. Say 0.22 cum.
level
0115 Coolie day -0.4100
(ix) Mild steel reinforcement for RCC work
steel @ 80kg/cum.
0.223cum.x80kg/cum. = 17.84 kg.
(x) Form work
0.60mx0.45m=0.27sqm.+
3.02mx0.25m=0.76sqm.
Total = 1.03sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
18.38 Painting G.I. pipes and fittings with synthetic enamel white
paint with two coats over a ready mixed priming coat, both of
approved quality for new work :

Perimeter = 0.0673 metre
Area=10x0.0673m = 0.673sqm.
Priming coat-
Painting two coats excluding priming coat with white paint on
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

Area = 10x0.0845 sqm. = 0.845 sqm.
Priming coat-
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

Area = 10x0.1061 sqm. = 1.061 sqm.
Priming coat-
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

Area = 10x0.1334 sqm. = 1.334 sqm.
Priming coat-
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

Area = 10x0.1520 sqm. = 1.520 sqm.
Priming coat-
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

Area = 10x0.1894 sqm. = 1.894 sqm.
Priming coat-
new work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.39 Repainting G.I. pipes and fittings with synthetic enamel white
paint with one coat of approved quality :

Painting one coat with white paint on old work.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive
bitumastic paint of approved quality :

Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 0.6730
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say

TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.41 Providing and filling sand of grading zone V or coarser grade,

all-round the G.I. pipes in external work :

Details of cost of sand filling all-round 15mm dia. pipe 10
metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 = 0.744 cum.
Less for pipe = 3.142/4(21.8)²x10 = (-)0.004 cum.
= 0.74 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.7400
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.41.1A Sub analysis item for sand filling component

Sub analysis item for sand filling component
MATERIAL
Labour:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum.
Say

metre
long.
= 252.3 Say 252mm
Quantity of sand = 10x0.30x0.252 = 0.756 cum.+
Less for pipe =3.142/4(27.3)²x10 = (-)0.006cum.
= 0.750 cum
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 259.2 Say 259mm
Less for pipe 3.142/4(34.2)²x10 = (-)0.009cum.
= 0.768 Say 0.77 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 267.9 Say 268mm
= 0.790 Say 0.79 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 273.8 Say 274mm
= 0.801 Say 0.80 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
metre
long.
= 285.8 Say 286mm
= 0.829 Say 0.83 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 301.6 Say 302mm
= 1.313 Say 1.31 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 314.9 Say 315mm
= 1.354 Say 1.35 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
Max. external dia of pipe = 115mm
= 340mm
= 1.43 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say

metre
long.
= 391.50mm Say 0.392m
= 2.13 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.42 Boring with 100 mm diameter casing pipe for hand pump /
tube well, in all soils except ordinary hard rocks requiring
blasting, including removing the casing pipe after the hand
pump / tube well is lowered and tested :
18.42.1 Up to 6 metres depth

Details of cost for 6m depth
LABOUR For boring and removing the pipe-
0010 Hire charges of Derrick monkey rope and other accessories day 0.5000
Depreciation @ 2% of the cost of casing pipe 6metre @ Rs.

per metre
1472 Casing pipe 100 mm dia metre 0.1200
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6 metre
Cost of one metre
Say
18.42.2 Beyond 6 m and up to 12 m depth

LABOUR for boring and removing the pipe-

per metre
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6 metre
Cost of one metre
Say
18.42.3 Beyond 12 m and up to 18 m depth

LABOUR
For boring and removing the pipe-

per metre
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 6 metre
Cost of one metre
Say
18.43 Providing and placing in position filters of 40 mm diameter

G.I. pipe with brass strainer of approved quality.

Details of cost for one strainer 1.5 long
MATERIAL
1882 Strainer brass 40 mm dia 1.5 metre long each 1.0000
LABOUR
9999 Sundries including hemp white lead etc. L.S. 7.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.5 metre
Cost of one metre
Say
18.44 Providing and fixing to filter and lowering to proper levels 40

mm G.I. pipe for tube well including cleaning and priming the
tube well.

Details of cost for a depth of 10 metre
MATERIAL
Carriage of 40mm pipe(36.5kg)
Added 2% wastage and fitting
9999 White lead, hemp and oil etc. L.S. 6.7600
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 metre
Cost of one metre
Say
18.45 Providing and placing in position hand pump of approved

quality for 40 mm diameter G.I. pipe complete
with all accessories.

Details of cost for one pump
MATERIAL
1693 S.C.I. hand pump each 1.0000
9977 Carriage L.S. 13.5200
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one hand pump
Say
18.46 Providing and fixing G.I. Union in G.I. pipe including cutting
and threading the pipe and making long screws etc. complete
(New work) :

MATERIAL
1641 G.I. Union 15 mm nominal bore each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
1648 G.I. Union 80mm nominal bore each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting
and threading the pipe and making long screws, including
excavation, refilling the earth or cutting of wall and making
good the same complete wherever required :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say

MATERIAL
1648 G.I. Union 80mm nominal bore each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for one no.
Say
18.48 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with
cover and suitable locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but without fittings
and the base support for tank.

Details of cost for 500 litres
MATERIAL
1649 Polyethylene water storage tank with cover and suitable per litre 500.0000
locking arrangement
9999 Placing at terrace L.S. 89.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 500 litre
Cost of one litre
Say
18.48A Providing and fixing rectangular high density polyethylene

water storage loft tank with cover, conforming to ISI : 12701,
colour of opaque white or as approved by Engineer-in-charge.
The rate includes making necessary holes for inlet, outlet &
over flow pipes. The base support i/c fittings &
fixtures for tank shall be paid separately.

Details of cost for one no. tank of 500 litres
MATERIAL
1649 Polyethylene water storage tank with cover and suitable per litre 500.0000
locking arrangement
9999 Placing at terrace L.S. 89.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 500 litters
Cost of 1 litre
Say
18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :

MATERIAL
7257 C.P. Brass bibcock 15 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.5 Providing and fixing C.P. brass long nose bib cock of approved
quality conforming to IS standards and weighing not less than
810 gms.

MATERIAL
7258 C.P. Brass long nose bibcock 15 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.51 Providing and fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than
690 gms.

MATERIAL
7259 C.P. Brass long body bibcock 15 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.52 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to IS:8931.

MATERIAL
7260 C.P. Brass stop cock (concealed) 15 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.53 Providing and fixing C.P. brass angle valve for basin mixer and
geyser points of approved quality conforming to IS:8931
18.53.1 15mm nominal bore

MATERIAL
7261 C.P. Brass angle valve 15 mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.53A Providing and fixing C.P. Brass extension nipple (size

15mmx50mm) of approved make and quality as per direction

MATERIAL
0593 C.P. Brass Extension Nipple (1/2"x2" size) each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.54 Providing and fixing PTMT bib cock of approved quality and
colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88

gms
MATERIAL
7400 15 mm PTMT bib cock each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.54.2 15 mm nominal bore, 122mm long, weighing not less than 99

gms
MATERIAL
7401 15 mm PTMT bib cock with flange (fancy) each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.54.3 15 mm nominal bore, 165 mm long, weighing not less than

110 gms
MATERIAL
7402 15 mm PTMT bib cock long body with flange each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No..
Say
18.54.4 15 mm nominal bore, 90 mm long, weighing not less than 93

gms
MATERIAL
7859 P.T.M.T. Bib cock with nozzle 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.55 Providing and fixing PTMT stop cock of approved quality and
colour.

gms
MATERIAL
7403 15 mm dia PTMT stop cock (male thread) each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

gms
MATERIAL
7405 20 mm dia. PTMT stop cock each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm long,

MATERIAL
7861 P.T.M.T. Stop cock (concealed) 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.56 Providing and fixing PTMT pillar cock of approved quality and
colour.

110 gms
MATERIAL
7406 PTMT pillar cock each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not

less than 120 gms
MATERIAL
7410 PTMT pillar cock (fancy) 15 mm foam flow. each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.57 Providing and fixing PTMT, push cock of approved quality and
colour.

gms
MATERIAL
7407 PTMT push cock 15 mm dia. each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

gms
MATERIAL
7408 PTMT push cock 12 mm dia. 20 mm BSP each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.58 Providing and fixing PTMT grating of approved quality and

colour.
18.58.1 Circular type

18.58.1.1 100 mm nominal dia
MATERIAL
7409 PTMT grating 100 mm dia. each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.58.1.2 125 mm nominal dia with 25 mm waste hole

MATERIAL
7411 125 mm grating with waste hole each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.58.2 Rectangular type with openable circular lid
18.58.2.1 150 mm nominal size square 100 mm diameter of the inner

hinged round grating
MATERIAL
7412 Rectangular type with openable circular lid 150 mm size 18 each 1.0000
mm high with 100 mm dia. (110 gm)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.59 Providing and fixing C.I. double acting air valve of approved
quality with bolts, nuts, rubber insertions etc. complete (The
tail pieces, tapers etc if required will be paid separately) :
18.59.1 50 mm dia
Details of cost for 10 no. double acting air
valves
MATERIAL
7415 Double acting air valve 50 mm each 10.0000
9977 Carriage of air valves L.S. 26.0000
9999 Labour for laying double acting air valve L.S. 39.0000
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
18.30.1 (Rate as per item no 18.30.1 of SH : Water Supply) each 10.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 air valves
Cost of 1 air valve
Say
18.59.2 80 mm dia
Details of cost for 10 no. double acting air
valves
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 air valve
Say
18.59.3 100 mm dia

Details of cost for 10 no. double acting
air valves
MATERIAL
18.30.2 (Rate as per item No.18.30.2 Of SH:Water Supply) each 10.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 air valve
Say
18.6 Providing and fixing enclosed type water meter (bulk type)
conforming to IS : 2373 and tested by Municipal Board
complete with bolts, nuts, rubber insertions etc. (The tail
pieces if required will be paid separately) :
Details of cost for one no. water meter
MATERIAL
7418 Water meter (including testing charges) 80 mm each 1.0000
9977 Carriage of water meter L.S. 26.0000
9999 Labour for laying water meter L.S. 39.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 water meter
Say

MATERIAL
18.30.2 (Rate as per item No.18.30.2) each 2.0000
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.61 Providing and fixing C.I. dirt box strainer for bulk type water
meter with nuts, bolts, rubber insertions etc. complete
conforming to IS : 2373 :
18.61.1 80 mm dia
Details of cost for on no. dirt box strainer
MATERIAL
7422 Dirt box strainer 80 mm each 1.0000
9977 Carriage of dirt box strainer L.S. 26.0000
9999 Labour for laying dirt box strainer L.S. 39.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 dirt box Stainer
Say
18.61.2 100 mm dia

Details of cost for 1 no. dirt box Stainer
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 dirt box Stainer
Say
18.61.3 150 mm dia

Details of cost for 1 no. dirt box Stainer
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 dirt box Stainer
Say
18.61.4 200 mm dia

Details of cost for one no. dirt box Stainer
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 dirt box Stainer
Say
18.62 Providing and fixing PTMT Ball cock of approved quality,

colour and make complete with Epoxy coated aluminium rod
with L.P./ H.P.H.D. plastic ball.

138 gms
MATERIAL
7495 PTMT Ball Cock 15mm Complete with Epoxy Coated each 1.0000
Aluminium Rod & H.D. Ball
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

198 gms
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.62.3 25 mm nominal bore, 152mm long, weighing not less than

440 gms
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

690 gms
MATERIAL
Aluminium Roa & H.D. Ball
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say

1240 gms
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal

bore, weighing not less than 85 gms
MATERIAL
7500 PTMT Angle Stop cock with Flange 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal

bore, weighing not less than 40 gms
MATERIAL
7501 PTMT Swivelling shower 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.65 Providing and fixing PTMT soap Dish Holder having length of
138mm, breadth 102mm, height of 75mm with concealed
fitting arrangements, weighing not less than 106 gms.

Details of cost for one no
MATERIAL
7509 PTMT Soap Dish/Holder 138x102x75mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no
Say
18.66 Providing and laying S&S C.I. Standard specials such as tees,
bends, collars tapers and caps etc, suitable for flanged jointing
as per IS : 1538 :
18.66.1 Up to 300 mm dia

MATERIAL
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 quintal 1.0000
suitable for lead jointing up to 300mm dia
Labour for laying
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.66.2 Above 300 mm dia

MATERIAL
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 quintal 1.0000
suitable for lead jointing over 300mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.67 Providing and laying S&S C.I. Standard specials suitable for
mechanical jointing as per IS : 13382 :
18.67.1 Up to 300 mm dia

MATERIAL
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for quintal 1.0000
mechanical joint as per I.S. 13382 up to 300mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say

MATERIAL
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for quintal 1.0000
mechanical joint as per IS 13382 over 300mm dia
Labour for Laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.68 Providing and laying D.I. specials of class K-12 suitable for
push-on jointing as per IS : 9523 :
18.68.1 Up to 600 mm dia

MATERIAL
7682 Ductile Iron K - 12 specials suitable for push on jointing up to quintal 1.0000
600 mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say

MATERIAL
7683 Ductile Iron K - 12 specials suitable for push on jointing over quintal 1.0000
600mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for

mechanical jointing as per IS : 9523 :
18.69.1 Up to 600 mm dia

MATERIAL
7684 Ductile Iron specials suitable for mechanical jointing as per I.S. quintal 1.0000
9523 -up to 600mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say

MATERIAL
7685 Ductile Iron Specials suitable for mechanical jointing as per I.S. quintal 1.0000
9523 over 600mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.7 Providing push-on-joints to Centrifugally (Spun) Cast Iron

Pipes or Ductile Iron Pipes including testing of joints and the
cost of rubber gasket :
18.70.1 100 mm dia pipes

Details of cost for 50 Joints
MATERIAL
7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality each 50.0000
100mm dia
Labour
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
MATERIAL
150mm dia
Labour
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
200mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
250mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
300mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
350mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
400mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
450mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
500mm dia
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
600mm dia
LABOUR
0114 Beldar day 13.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
700mm dia
LABOUR
0114 Beldar day 15.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
750mm dia
LABOUR
0114 Beldar day 15.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
800mm dia
LABOUR
0114 Beldar day 17.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say

MATERIAL
900mm dia
LABOUR
0114 Beldar day 20.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
18.70.15 1000 mm dia pipes

MATERIAL
1000mm dia
LABOUR
0114 Beldar day 22.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
18.71 Providing and laying Double Flanged (screwed / welded)

Centrifugally (Spun) Cast Iron, Class B (IS : 1536) :
18.71.1 100 mm dia C.I. Double Flanged Pipe

MATERIAL
100 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 27.00 Kg/m
Weight of 5 m pipes 27.00x5 = 135.00 Kg
7712 Screwed double flanged centrifugally cast (spun) C.I. Pipe of metre 5.0000
Class B conforming to I.S. 1536, - 100mm dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost of metre
Say
MATERIAL
Weight of 5 m pipes = 44.10x5 = 220.50 Kg
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
7716 Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 300mm dia metre 5.0000

Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile

Iron Pipes conforming to IS : 8329 :
18.72.1 100 mm dia Ductile Iron Class K-7 pipes

MATERIAL
100mm dia. cast iron pipes (in 5.5 m lengths)
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm metre 10.0000
dia
2343 Carriage of ductile iron pipes (k7) 100 mm dia 100 metre 0.1000
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
150 mm dia. cast iron pipes (in 5.5 m lengths)
dia
2344 Carriage of cast iron pipes 150 mm dia 100 metre 0.1000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
200 mm dia. cast iron pipes (in 5.5 m
lengths)
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
Weight of 10m pipes 106.640x10
= 1066.40 Kg
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm metre 10.0000
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm metre 10.0000
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
2330 Carriage of C.I. pipes 500 mm dia 100 metre 0.1000
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 0.1000
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say

MATERIAL
dia
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
18.73 Providing and laying Double Flanged (Screwed/ Welded)

Centrifugally (Spun) Ductile Iron Pipes of Class K - 9
conforming to IS : 8329 :
18.73.1 100 mm dia Ductile Iron Double Flanged

MATERIAL
100 mm dia. ductile iron pipes double flanged
7686 Ductile Iron Pipe Class K-9 flanged and welded 100mm dia metre 5.0000
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
7687 Ductile Iron Pipe Class K-9 flanged and welded 150 dia metre 5.0000
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say

MATERIAL
Weight of 1 m pipes = 254.900 Kg.m
2330 Carriage of C.I. pipes 500 mm dia 100 metre 0.0500

Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost per metre
Say
18.74 Providing and fixing unplasticised P.V.C. connection pipe with

PTMT Nuts, collar and bush of approved quality and colour.
18.74.1 15 mm nominal bore with 30cm length

MATERIAL
7862 15 mm nominal bore and 30 cm length PVC connection pipe each 1.0000
with P.T.M.T. Nuts
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.74.2 15 mm nominal bore with 45 cm length

MATERIAL
7863 15 mm nominal bore and 45 cm length PVC connection pipe each 1.0000
with P.T.M.T. Nuts
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.75 Providing and fixing PTMT extension nipple for water tank
pipe, fittings of approved quality and colour.
18.75.1 15 mm nominal bore, weighing not less than 32 gms

MATERIAL
7864 P.T.M.T. extension nipple 15mm each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.75.2 20 mm nominal bore, weighing not less than 40 gms

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.75.3 25mm nominal bore, weighing not less than 62 gms

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.76 Cutting holes up to 30x30 cm in walls including making good

the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks

Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
Brick work with bricks of class designation 75 in cement
mortar 1:4 (1 cement : 4 coarse sand)
10x0.30x0.30x0.344m = 0.309 cum
Less 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
12 mm cement plaster 1:4 (1 cement : 4 coarse sand)
10x2x0.3x0.3m = 1.80 sqm
Les 33% for pipe etc. = (-) 0.59 sqm
= 1.21 sqm Say 1.20 sqm
13.4.1 (Rate as per item no 13.4.1 of SH : Finishing) sqm 1.2000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say
18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for

passing drain pipe etc. and repairing the hole after insertion of
drain pipe etc. with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including finishing complete so as to make it leak proof.

Average size 15x15x15 cm
Labour for cutting holes
Cement concrete 1:2:4 (1 cement : 2 coarse sand ; 4 graded
10x0.15x0.15x0.15 m = 0.033 cum
Les 33% for pipe etc. = (-) 0.011 cum
= 0.022 cum Say 0.0.02 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete Work cum 0.0200
9999 Finishing top and bottom and making the holes leak proof L.S. 121.1600

9999 Sundries L.S. 21.5800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 holes
Cost of 1 hole
Say
18.78 Making chases up to 7.5x7.5 cm in walls including making

good and finishing with matching surface after housing G.I.
pipe etc.

Labour for making chases
0.075x0.075x10 m = 0.05625 cum
Les 33% for pipe etc. = (-) 0.01856 cum
= 0.03769 cum Say 0.04 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.79 Making hole up to 20x20 cm and embedding pipes up to 150

mm diameter in masonry and filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20
mm nominal size) including disposal of malba.

0.2x0.2x10 m = 0.40 cum
Les for pipe 3.14x(0.15)²/4x10 = (-) 0.177 cum
= 0.223 cum Say 0.22 cum
9999 Disposal of malba L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.8 Disinfecting C.I. water mains by flushing with water containing

bleaching powder @ 0.5 gms per litre of water and cleaning
the same with fresh water, operation to be repeated three
times including getting the sample of water from the
disinfected main tested in the municipal laboratory.
18.80.1 80 mm diameter C.I. pipe

MATERIAL
Bleaching powder
3x3.14/4x(80/10)²x(100x100)/1000x0.5 gms = 754.28 gms Say
0.008 q
LABOUR
9999 Sundries including testing of samples L.S. 9.8800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(100/10)²x(100x100)/1000x0.5 gms = 1178.57 gms
Say 0.012 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(125/10)²x(100x100)/1000x0.5 gms = 1841.52 gms
Say 0.018 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(150/10)²x(100x100)/1000x0.5 gms = 2651 gms Say
0.027 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(200/10)²x(100x100)/1000x0.5 gms = 4712.39 gms
Say 0.047 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(250/10)²x(100x100)/1000x0.5 gms = 7363.10 gms
Say 0.074 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(300/10)²x(100x100)/1000x0.5 gms = 10602.88 gms
Say 0.106 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(350/10)²x(100x100)/1000x0.5 gms = 14431.70 gms
Say 0.144 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(400/10)²x(100x100)/1000x0.5 gms = 18849.60 gms
Say 0.189 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(450/10)²x(100x100)/1000x0.5 gms = 23856.50 gms
S ay 0.239 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(500/10)²x(100x100)/1000x0.5 gms = 29452.40 gms
Say 0.295 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
Bleaching powder
3x3.14/4x(600/10)²x(100x100)/1000x0.5 gms = 42411.5 gms
Say 0.424 q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say
18.81 Extra for every operation of disinfecting the C.I. main by

flushing with water containing bleaching powder @ 0.5 gms
per litre of water and cleaning the same with fresh water,
including getting the samples of water tested in the municipal
laboratory :

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metre
Say
18.82 Dismantling old C.I. pipes including excavation and

refilling trenches after taking out the pipes, breaking lead
caulked joints, melting of lead and making into blocks,
including stacking of pipes at site lead up to 50 metre:

Details of cost for 40.26 m or 11 nos. joints.
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.098)² =(-) 0.30 cum
Total= 16.31 cum
2.25 (Rate as per item No.2.25 of SH Earth work) cum 16.3100
Breaking lead caulked joints, blocks and stacking
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x55x0.75 m=16.61 cum
Total= 16.17 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x55x0.75 m=16.61 cum
Total= 15.96 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x55x0.75 m=16.61 cum
Total= 15.70 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x60x0.75 m=18.12 cum
Total= 16.56 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.65x0.75 m=19.63 cum
Total= 17.26 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.70x0.75 m=21.14 cum
Total= 17.79 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.75x0.75 m=22.65 cum
Total= 18.14 cum
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.80x0.75 m=24.16 cum
Total= 18.23 cum
MATERIAL
LABOUR
0114 Beldar day 10.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.85x0.75 m=25.67 cum
Total= 18.38 cum
MATERIAL
LABOUR
0114 Beldar day 11.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x.90x0.75 m=27.18 cum
Total= 18.24 cum
MATERIAL
LABOUR
0114 Beldar day 12.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say

1x40.26x1.00x0.75 m=30.20 cum
Total= 17.44 cum
MATERIAL
LABOUR
0114 Beldar day 14.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of one metre
Say
18.83 Labour for cutting C.I. pipe with steel saw.

Detail of cost for one cut
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

Detail of cost for one cut.
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
9999 Sundries L.S. 12.4800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say
LABOUR
9999 Sundries L.S. 15.2100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say

LABOUR
9999 Sundries L.S. 16.1200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of each cut
Say
18.84 Providing & fixing chrome plated brass battery based infrared
sensor operated pillar cock, having foam flow technology.

MATERIAL
3327 15 mm Battery Based Sensor Pillar Cock each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
18.85 Providing and fixing Stainless Steel pipe and fitting of grade
AISI 304 as per JIS standard 3448 complete with press type
fitting (fitting shall be paid for separately) i/c fixing of the pipe
with clamps at 1.00 m spacing including cutting and making
good the walls including testing of joints complete as per
direction of Engineer-in-charge. (The pipe length inserted in
the fitting shall not be measured for payment)
18.85.1 15.88 mm outer dia pipe

MATERIAL
8779 SS pipe 304 grades with press fit technology as per JIS 3448 metre 10.0000
standard 15.88 mm outer dia
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.0030
Add 3% for pipe inserted into fitting and wastage etc. on P
3xP / 100
Add 2% for special T&P and sundries etc. on P
2 xP / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.85.2 22.22 mm outer dia Pipe
MATERIAL
3 xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.85A Providing and fixing Stainless Steel pipe and fitting of grade
316L as per IS 6911:2017 and conforming to EN-10312
standards complete with press type fitting (fitting shall be paid
for separately) i/c fixing of the pipe with clamps at 1.00 m
spacing including cutting and making good the walls including
testing of joints complete as per direction of Engineer-in-
charge. (The pipe length inserted in the fitting shall not be
measured for payment)
18.85A.1 15 mm outer dia pipe

MATERIAL
3862 SS pipe 316L grade as per IS 6911:2017 with press fit metre 10.0000
technology conforming to EN-10312 standards 15 mm outer
dia
3xP / 100
2 xP / 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.85A.2 22 mm outer dia Pipe

MATERIAL
dia
3 xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say

MATERIAL
dia
3xP/ 100
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.86 Providing and fixing Stainless Steel pipe and fitting of grade
AISI 304 as per JIS standard 3448 complete with press type
fitting (fitting shall be paid for separately) i/c fixing of the pipe
with clamps at 1.00m spacing and also including cutting of
chases and making good the walls including testing of joints
complete as per direction of Engineer -in-charge. (The pipe
length inserted in the fitting shall not be
measured for payment)
Internal work - Concealed Pipe

18.86.1 15.88 mm outer dia .Pipes.

MATERIAL
3xP/ 100
Making chases up to 7.5x7.5 cm.in walls and making good the
same
18.78 Rate as per Item No.18.78 of SH:WATER SUPPLY metre 10.0000
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.86.2 22.22 mm Outer dia pipes

MATERIAL
3xP/ 100
same
18.78 Rate as per Item No.18.78 of SH: WATER SUPPLY metre 10.0000
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.86A Providing and fixing Stainless Steel pipe and fitting of grade
standards complete with press type fitting (fitting shall be paid
for separately) i/c fixing of the pipe with clamps at 1.00m
spacing and also including cutting of chases and making good
the walls including testing of joints complete as per direction
of Engineer -in-charge. (The pipe length inserted in the fitting
shall not be measured for payment)
Internal work - Concealed Pipe
18.86A.1 15 mm outer dia .Pipes.

MATERIAL
dia
3xP/ 100
same
18.78 Rate as per Item No.18.78 of SH:WATER SUPPLY metre 10.0000
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.86A.2 22 mm Outer dia pipes

MATERIAL
dia
3xP/ 100
same
18.78 Rate as per Item No.18.78 of SH: WATER SUPPLY metre 10.0000
2xP/ 100
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
18.87 Providing and fixing required Stainless Steel Fitting of press fit
design of grade AISI 304 conforming to JWWA G116 standard
with V-profile or M-profile and with O-ring sealing gasket of
EPDM material of required dia as per direction of Engineer-in-
charge.
Coupling/Socket
18.87.1 For 15.88 mm outer dia pipe

MATERIAL
8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.87A Providing and fixing required Stainless Steel Fitting of press fit
design of grade 316L as per IS 6911:2017 and conforming to
EN-10312 standards with V-profile and with O-ring sealing
gasket of EPDM material of required dia as per direction of
Engineer-in-charge.
Coupling/Socket
18.87A.1
For 15 mm outer dia pipe
MATERIAL
3868 Coupling/Socket fittings for 15 mm outer dia SS pipe of grade each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.87A.2 For 22 mm outer dia pipe

MATERIAL
316 L as per IS 6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
EPDM material of providing and fixing required Stainless Steel
Fitting of press fit design of grade AISI 304 conforming to
JWWA G116 standard with V-profile or M-profile and with O-
ring sealing gasket of EPDM material of required dia as per
Reducer
18.88.1 For 22.22 mm x 15.88 mm outer dia pipe
MATERIAL
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.88A Reducer
18.88A.1 For 22mm x 15 mm outer dia pipe

MATERIAL
3874 Reducer for 22mm x 15 mm outer Dia SS pipe of grade 316L each 1.0000
as per IS 6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.88A.2 For 28 mm x 15 mm outer dia pipe

MATERIAL
3875 Reducer for 28 mm X 15 mm outer Dia SS pipe of grade 316L each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3876 Reducer for 28 mm x 22 mm outer Dia SS pipe of grade 316L each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Slip Coupling/ Socket


MATERIAL
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Sleeve/Slip Coupling/ Socket

MATERIAL
3885 Sleeve/ Slip Coupling / Socket 15 mm outer dia SS pipe of each 1.0000
grade 316L as per IS 6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Elbow 90°
18.90.1 For 15.88mm outer dia pipe

MATERIAL
8812 Elbow 90° for 15.88 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Elbow 90°

MATERIAL
3891 Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS each 1.0000
6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Reducing Elbow 90°

18.91.1 For22.22 mm x 15.88 mm outer dia pipe
MATERIAL
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS each 1.0000
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8820 Reducing Elbow 90° for 28.58 mm X22.22 mm outer dia SS each 1.0000
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
pipe
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Equal Tee
MATERIAL
8824 Equal Tee for 15.88 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Equal Tee

MATERIAL
3897 Equal Tee for 15 mm outer dia SS pipe of grade 316L as per IS each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Reducing Tee
MATERIAL
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Reducing Tee
MATERIAL
3903 Reducing Tee for 22 mm x 15 mm outer dia SS pipe of grade each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3904 Reducing Tee for 28 mm X 15 mm outer dia SS pipe of grade each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
316 conforming to IS 6911:2017
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3915 Reducing Tee for 54mm X 42mm outer dia SS pipe of grade each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Male Thread Tee

18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded
MATERIAL
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 each 1.0000
mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Female Thread Tee

18.95.1 For 15.88 mm outer dia x15 mm nominal dia threaded
MATERIAL
8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Female Thread Tee
18.95A.1 For 15 mm outer dia x 1/2" nominal dia threaded

MATERIAL
3916 Stainless steel Female thread Tee for 15 mm outer dia X 1/2" each 1.0000
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.95A.2 For 22mm outer dia x 1/2" nominal dia threaded

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.95A.3 For 22mm outer dia x 3/4" nominal dia threaded

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.95A.6 For 28 mm outer dia x 1" nominal dia threaded

MATERIAL
3921 Stainless steel Female thread Tee for 28 mm outer dia X 1" each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.95A.8 For 35 mm outer dia x 1-1/4" nominal dia threaded

MATERIAL
3923 Stainless steel Female thread Tee for 35 mm outer dia X 1- each 1.0000
1/4" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.95A.11 For 54 mm outer dia x 2" nominal dia threaded

MATERIAL
3926 Stainless steel Female thread Tee for 54 mm outer dia X 2" each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Female Thread Connector/ Adapter

MATERIAL
8887 Stainless steel Female threaded Connector/Adapter for 15.88 each 1.0000
mm outer dia X 15 mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Female Thread Connector/ Adapter
18.96A.1 For 15 mm outer dia x 1/2" mm nominal dia threaded

MATERIAL
3927 Stainless steel Female threaded Connector/Adapter for 15 each 1.0000
mm outer dia X 1/2" nominal dia threaded of grade 316L as
per IS 6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.96A.4 For 28 mm outer dia X 1" nominal dia threaded

MATERIAL
mm outer dia X 1" nominal dia threaded of grade 316L as per
IS 6911:2017 and conforming to EN-10312
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.96A.5 For 35 mm outer dia X 1-1/4" nominal dia threaded

MATERIAL
mm outer dia X 1-1/4" nominal dia threaded of grade 316L as
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
mm outer dia X 1-1/2" nominal dia threaded of grade 316L as
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
mm outer dia X 2" nominal dia threaded of grade 316L as per
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Male Thread Connector/ Adapter

MATERIAL
8899 Stainless steel Male threaded Connector/ Adapter for 15.88 each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
8900 Stainless steel Male threaded Connector/Adapter for 22.22 each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
mm outer dia X 20mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
mm outer dia X 50 nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
EN-10312 standard with V-profile and with O-ring sealing
Engineer-in-charge.
Male Thread Connector/ Adapter

18.97A.1 For 15 mm outer dia X 1/2" nominal dia threaded
MATERIAL
3934 Stainless steel Male threaded Connector/ Adapter for 15 mm each 1.0000
outer dia X 1/2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
outer dia X 1" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
outer dia X 1-1/4" nominal dia threaded of grade 316L as per
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.97A.6 For 42 mm outer dia X 1-1/2"nominal dia threaded

MATERIAL
outer dia X 1-1/2" nominal dia threaded of grade 316L as per
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
outer dia X 2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Valve Connector
MATERIAL
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Female Threaded Elbow 90°

MATERIAL
8917 SS Female Threaded Elbow 90° for 15.88 mm outer dia X 15 each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
MATERIAL
8918 Stainless steel Female Threaded Elbow 90° for 22.22 mm each 1.0000
outer dia X 15 mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
outer dia X40 mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Female Threaded Elbow 90°

MATERIAL
3941 Stainless steel Female Threaded Elbow 90° for 15 mm outer each 1.0000
dia X 1/2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3942 Stainless steel Female Threaded Elbow 90° for 22 mm outer each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.99A.3 For 28mm outer dia X 1" nominal dia threaded

MATERIAL
3943 Stainless steel Female Threaded Elbow 90° for 28mm outer each 1.0000
dia X 1" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
18.99A.4 For 35mm outer dia X 1-1/4" nominal dia threaded

MATERIAL
dia X 1-1/4" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say

MATERIAL
dia X 1-1/2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
dia X 2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Male Threaded Elbow 90°

MATERIAL
8926 Stainless steel Male Threaded Elbow 90° for 15.88 mm outer each 1.0000
dia X 15 mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
dia X40 mm nominal dia threaded
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.100.A Providing and fixing required Stainless Steel Fitting of press fit
Engineer-in-charge.
Male Threaded Elbow 90°
18.100A.1 For 15mm outer dia X 1/2" nominal dia threaded

MATERIAL
3947 Stainless steel Male Threaded Elbow 90° for 15mm outer dia X each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.100A.2 For 22mm outer dia X 3/4" nominal dia threaded

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
1" nominal dia threaded of grade 316L as per IS 6911:2017
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
1- 1/4" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
1- 1/2" nominal dia threaded of grade 316L as per IS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.100A.6 For 54mm outer dia X 2" mm nominal dia threaded

MATERIAL
2" nominal dia threaded of grade 316L as per IS 6911:2017
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Cap
MATERIAL
8936 Stainless steel Cap for 15.88 mm outer dia pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.

MATERIAL
3953 Stainless steel Cap for 15 mm outer dia pipe of grade 316L as each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
charge.
Pipe Bridge
MATERIAL
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
Engineer-in-charge.
Pipe Bridge

MATERIAL
3959 Stainless steel Pipe Bridge for 15 mm outer dia pipe of grade each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
Engineer-in-charge.
Male Union
18.103.1 For 15mm outer dia X 1/2" nominal dia threaded
MATERIAL
3962 Stainless steel Male Union for 15mm outer dia X 1/2" nominal each 1.0000
dia threaded of grade 316L as per IS 6911:2017 and
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.103.4 For 28mm outer dia X 1" nominal dia threaded

MATERIAL
3965 Stainless steel Male Union for 28mm outer dia X 1" nominal each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.103.5 For 35mm outer dia X 1-1/4" nominal dia threaded

MATERIAL
3966 Stainless steel Male Union for 35mm outer dia X 1-1/4" each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
18.103.6 For 42mm outer dia X 1-1/2" nominal dia threaded

MATERIAL
3967 Stainless steel Male Union for 42mm outer dia X 1-1/2" each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3968 Stainless steel Male Union for 54mm outer dia X 2" nominal each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Female Union
18.104.1 For 22 mm outer dia X 3/4" nominal dia threaded
MATERIAL
3969 Stainless steel Female Union for 22 mm outer dia X 3/4" each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
3970 Stainless steel Female Union for 28mm outer dia X 1" nominal each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
Engineer-in-charge.
Female Transition Elbow / FTE

MATERIAL
3971 Stainless steel Female Transition Elbow / FTE for 15mm outer each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no.
Say
19.1 Providing, laying and jointing glazed stoneware pipes class SP-
1 with stiff mixture of cement mortar in the proportion of 1:1
(1 cement : 1 fine sand) including testing of joints etc.
complete :

MATERIAL
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each 55.0000
Added 10% allowance for breakage
2224 Carriage of S.W. pipes 100 mm dia 100 metre 0.3300
Cement for 50 joints = 0.019 tonne
sand)
or plain gaskin @ 0.09 kg per joint = 0.09x50 = 4.50 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30 metre
Cost of 1 metre
Say

MATERIAL
Cement of 50 joints = 0.036 tonne
sand)
or plain gaskin @ 0.18 kg per joint = 0.18x50 = 9 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30 metre
Cost of 1 metre
Say

MATERIAL
sand)
or plain gaskin @ 0.24 kg per joint = 0.24x50 =12.00 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30 metre
Cost of 1 metre
Say

MATERIAL
sand)
or plain gaskin @ 0.30 kg per joint = 0.30x50= 15.00 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30 metre
Cost of 1 metre
Say

MATERIAL
sand)
or plain gaskin @ 0.36 kg / joint
= 0.36x50 =18.00 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal size)
all-round S.W. pipes including bed concrete as per standard
design :
19.2.1 100 mm diameter S.W. pipe

Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than 1200 mm
W = 12.4 + 30 = 42.4
Area= 42.4² x ( 0.5 + 3.14/ 8) - (3.14 x 12.4²/4)
= 1484 sqcm = 0.1484 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd. = 1.48 cum
Cost of 10 metres
Cost of metre
Say

Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 150 + 16 + 16 = 182 mm or 18.2 cm
W = 18.2 + 30 = 48.2
Area = 48.2² x ( 0.5 + 3.14/ 8) - (3.14 x 18.2 ²/4)
= 1807.66 sqcm = 0.1808 sqm. Say 0.181 sqm
Cost of 10 metres
Cost of metre
Say

Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
W = 23.4 + 30 = 53.4
Area = 53.4² x ( 0.5 + 3.14 / 8) - (3.14 x 23.4²/4)
= 2115 sqcm = 0.2115 sqm Say 0.211 sqm
Cost of 10 metres
Cost of metre
Say
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
W = 29 + 30 = 59
Area= 59² x ( 0.5 + 3.14/ 8) - (3.14 x 29²/4)
= 2447 sqcm = 0.2447 sqm. Say 0.244 sqm
Cost of 10 metres
Cost of metre
Say
19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5

up to haunches of S.W. pipes including bed concrete as per
standard design :

Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²

= WD1+R²(cot Q-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 + 12 = 124 mm
W = 124 + 300 = 424 mm
D1 = Depth = 100 + (½ x 124) = 162 mm R = 62 mm
Sin Q = (2x62)/424 = 0.292 therefor Q = 17°0' Hence Tan Q =
0.3057
Area = 424 x 162 + (62)² (Cot Q - 3.14 + Q)
= [68688 + 3844 (1/0.3057 - 180° + 17°0')] sqmm
= [68688 + 3844 (3.27 - 163°0' x 3.14/180)] sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm
= 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
For 10 m length qty. of concrete reqd. = 0.07034x10 = 0.7034
cum
Cost of 10 metres
Cost per metre
Say

= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²

= WD1+R²(cot Q-3.14 + Q)
W = D + X ; X = 300 mm, D = 150 + 16+ 16 = 182 mm W = 182 +
300 = 482 mm
D1 = Depth = 150 + (½ x 182) = 241 mm R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefor Q = 22°12' Hence Tan Q
= 0.4081
Area = 482 x 241 + (91)² (Cot Q - 3.14 + Q)
= [116162 + 8281 (1/0.4081 - 180°+ 22°12')] sqmm
= [116162 + 8281 (2.45 - 157°48' x3.14/180)] sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm
= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm
for 10 metre length qty. of concrete reqd.
= 0.1136777x10 = 1.136777 cum. Say 1.14 cum
Cost of 10 metres
Cost per metre
Say

= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²

= WD1+R²(cot Q-3.14 + Q)
W = D + X ; X = 300 mm, D = 200+ 17 + 17 = 234 mm W = 234 +
300 = 534 mm
D1 = Depth = 150 + (½ x 234) = 267 mm R = 117 mm
Sin Q = (2x117)/534 = 0.4382 therefor Q= 26°0' Hence Tan Q =
0.4877
Area = 534 x 267 + (117)² (Cot Q - 3.14 + Q)
= [142578 + 13689 (1/0.4877 - 180°+ 26°0')] sqmm
= [142578 + 13689 (2.05 - 154°0' x 3.14/180)] sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm
= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm
= 133817.04 sqmm
For 10 m length qty. of concrete reqd. = 0.134x10 = 1.34 cum

Cost of 10 metres
Cost per metre
Say

= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²

= WD1+R²(cot Q-3.14 + Q)
W = D + X ; X = 300 mm, D = 250 + 20 + 20 = 290 mm W = 290
+ 300 = 590 mm
D1 = Depth = 150 + (½ x 290) = 295 mm R = 145 mm
Sin Q = (2x145)/590 = 0.49154
therefor Q = 29°26' Hence Tan Q = 0.5635
Area = 590 x 295 + (145)² (Cot Q - 3.14 + Q)
= [174050 + 21025 (1/0.5635 - 180°+ 29°26')] sqmm
= [174050 + 21025 (1.77 - 150°34' x 3.14/180)] sqmm
= [174050 + 21025 x (1.77-2.63)] sqmm
= [174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm
= 155968.5 sqmm

Cost of 10 metres
Cost per metre
Say

= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²

= WD1+R²(cot Q-3.14 + Q)
W = D + X ; X = 300 mm, D = 300 + 25 + 25 = 350 mm W = 350
+ 300 = 650 mm
D1 = Depth = 150 + (½ x 350) = 325 mm R = 175 mm
Sin Q = (2x175)/650 = 0.5385 therefor Q = 32°34' Hence Tan Q
= 0.6387
Area = 650 x 325 + (175)² (Cot Q - 3.14 + Q)
= [211250 + 30625 (1/0.6387 - 180°+ 32°34')] sqmm
= [211250 + 30625 (1.566 - 147°26' x 3.14/180)] sqmm
= [211250 + 30625 x (1.566-2.571)] sqmm
= [211250 + 30625 x (-1.005)] sqmm
= [211250 - 30778.13) sqmm
= 180471.87 sqmm
Say 0.180 sqm

Cost of 10 metres
Cost per metre
Say
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water
tight C.I. cover with frame of 300 x300 mm size (inside) the
weight of cover to be not less than 4.50 kg and frame to be
not less than 2.70 kg as per standard design:
19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Details of cost of one gully tarp
1900 S.W. gully trap P type 100x100 mm 1.0000
1364 C.I. grating 100x100 mm 1.0000
1352 C.I. cover and frame 300x300 mm inside 1.0000
9977 Carriage of materials 4.5000
Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap 0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.345÷3x[0.09+0.01+(0.09x0.01)1/2] = 0.015 cum
3.14/4x(0.124)²x0.47 = 0.006 cum
Total= 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum say 0.09
cum
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work 0.0900
Brick work with 7.5 class designation brick in cement mortar
1:4 (1 cement : 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum. say 0.13 cum
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work 0.1300
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded
1.66x0.115x0.04 m = 0.008 cum
Total = 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum
say 0.09 cum
Rate as per item no 4.1.11 of SH : Concrete Work
Brick work with modular extruded brunt fly ash clay sewer
bricks (Conforming to IS: 4885 ) cement mortar 1:4 (1
cement :4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum

Rate as per item No 6.36.1 of SH : Brick Work
1.66x0.115x0.04 m = 0.008 cum
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement :
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say 0.29 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing 0.2900
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.4.1.2 With Sewer bricks conforming to IS : 4885

1900 S.W. gully trap P type 100x100 mm each 1.0000
1364 C.I. grating 100x100 mm each 1.0000
1352 C.I. cover and frame 300x300 mm inside each 1.0000
0.68x0.68x0.10 m = 0.046 cum
Total=0.107 cum
Deduct:
0.345÷3x[0.09+0.01+(0.09x0.01)1/2]= 0.015 cum
3.14/4x(0.124)²x0.47 = 0.006 cum
Total = 0.021 cum
cum
bricks (Conforming to IS: 4885 ) cement mortar 1:4 (1
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum

6.36.1 Rate as per item No 6.36.1 of SH : Brick Work 0.1300
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say 0.29 sqm
TOTAL
Add 1 % Water charges on "W-A" TOTAL
TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
TOTAL
Add 15% CPOH on "Y-A" TOTAL
TOTAL
Cost of each
Say
19.4.2 150 x 100 mm size P type
designation 7.5
0.68x0.68x0.10 m = 0.046 cum
Total =0.107 cum
Deduct:
0.322÷3x[0.09+0.023+(0.09x0.023)1/2]= 0.017 cum
3.14/4x(0.124)²x0.485 = 0.006 cum
Total = 0.023 cum
cum
Brick work with 75 class designation brick in cement mortar
1:4 (1 cement :4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.337x(1.20+0.60)] = 0.303 sqm. say 0.30 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.4.2.2 With sewer bricks conforming to IS : 4885

0.68x0.68x0.10 m = 0.046 cum
Total =0.107 cum
Deduct:
0.322÷3x[0.09+0.023+(0.09x0.023)1/2]= 0.017 cum
3.14/4x(0.124)²x0.485 = 0.006 cum
Total = 0.023 cum
cum
Brick work with sewer bricks conforming to IS:4885 in cement
mortar 1:4 (1 cement :4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.1300
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.337x(1.20+0.60)] = 0.303 sqm. say 0.30 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.4.3 180x150 mm size P type
designation 7.5
1904 S.W. gully trap P type 180x150 mm 1.0000
1367 C.I. grating 180x180 mm 1.0000
1352 C.I. cover and frame 300x300 mm inside 1.0000
9977 Carriage of materials 4.5000
0.68x0.68x0.10 m = 0.046 cum
Total=0.107 cum
Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
cum
Brick work with 7.5 class designation brick in cement mortar

1:4 (1 cement : 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum. say 0.13 cum

1.66x0.115x0.04 m =0.008 cum

[1/2x0.166x(1.20+0.72)] = 0.159 sqm say 0.16 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m =0.008 cum
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say0.16 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.5 Dismantling of old S.W. pipes including breaking of joints and

bed concrete stacking of useful materials near the site within
50 m lead and disposal of unserviceable materials into
municipal dumps :

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
19.6 Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete :
19.6.1 100 mm dia. R.C.C. pipe

MATERIAL
1700 R.C.C. pipes NP2 class 100 mm dia metre 10.0000
(in 2 m. length = 5 Nos.)
1714 R.C.C. collars NP2 class 100 mm dia each 5.0000
5 Nos.
Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say
0.005 tonne
Fine sand for 5 joint = 0.0013x5 = 0.0065 cum = 0.006 cum

sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
5 Nos.
Cement of 5 joints = 5x0.0008 = 0.004 cum = 0.006 tonne
Fine sand for 5 joint = 0.0016x5 = 0.008 cum
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
5 Nos.
Cement of 5 joints = 5x0.0012 = 0.006 cum = 0.009tonne
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
(in 2.5 m. length = 4 Nos.)
4 Nos.

Fine sand for 4 joint = 0.0037x4 = 0.0148 say 0.015cum
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
4 Nos.
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 0.1000

sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
4 Nos.
Fine sand for 4 joints = 0.0089x4 = 0.0356 cum = 0.036 cum

sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
4 Nos.
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 0.1000
Fine sand for 4 joints = 0.0108x4 = 0.043 cum
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
4 Nos.


sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say

MATERIAL
4 Nos.


sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of1 metre
Say
19.6.10 900 mm dia. R.C.C. pipe

MATERIAL
4 Nos.
Cement of 4 joints = 4x0.0082 = 0.0328 cum = 0.0488 t Say
0.049
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
19.6.11 1000 mm dia. R.C.C. pipe

MATERIAL
4 Nos.

sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
19.6.12 1100 mm dia. R.C.C. pipe

MATERIAL
4 Nos.
Cement of 4 joints = 4x0.0103 =0.0412 cum = 0.061 tonne


sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
19.6.13 1200 mm dia. R.C.C. pipe

MATERIAL
4 Nos.


sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix
(1 cement : 1.5 coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total
weight of cover and frame to be not less than 38 kg (weight of
cover 23 kg and weight of frame 15 kg) :
designation 7.5
Details of cost for 1 manhole
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Brick work with bricks of class designation 7.5 in foundation &
plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum

Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
Total = 0.340 cum
stone aggregate 20 mm nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum

Less for pipe 1x0.90x3.14/4x(0.15m)² = (-) 0.02 cum
= 0.16 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.1600
with floating coat of neat cement
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse
For slab : 1.36x1.26x0.15m = 0.257 cum

Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.2200
Less labour for not lifting the materials up to floor five level
0115 Coolie day -0.4100

Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
= 0.442 sqm Say 0.44 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.4400
LABOUR
Extra labour for making channel :
1354 Rectangular cover 455x610 mm with frame (low duty) each 1.0000
(inside)
9977 Carriage of C.I. cover & frame L.S. 6.7600
9999 Painting of C.I. cover & frame with coal tar L.S. 6.7600
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
mortar 1:4 (1 cement :4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Total= 0.340 cum
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum

Total= 0.16 cum
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
For slab : 1.36x1.26x0.15m = 0.257 cum

= 0.215 cum Say 0.22 cum
0115 Coolie day -0.4100

0.22 cum @ 48.06 kg/cum = 10.57 kg
Form work = 0.90x0.80 = 0.72 sqm
= 0.442 sqm Say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
LABOUR
(inside)
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :
designation 7.5
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.80 m = 0.942 cum

Less for pipe 2x3.14x(0.15m)²x0.23m =(-) 0.008 cum
Total= 0.934 cum Say 0.93 cum
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum

Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
Total= 0.249 cum say 0.25
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.09 sqm
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum

Less for cover 0.7854x(0.50)²x0.15m = (-) 0.029 cum
= 0.31 cum
0115 Coolie day -0.5800
0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 500 mm dia cover with frame (medium duty) each 1.0000
9999 Sundries L.S. 16.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.80 m = 0.942 cum

= 0.934 cum Say 0.93 cum
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum

= 0.249 cum say 0.25
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.09sqm
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum

= 0.31 cum cum 0.3100
5.3 Rate as per item no 5.3 of SH : RCC Work
0115 Coolie day -0.5800

0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 500 mm dia cover with frame (medium duty) each 1.0000
9999 Sundries L.S. 16.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (heavy duty) 560 mm internal diameter, total
weight of cover and frame to be not less than 208 kg (weight
of cover 108 kg and weight
of frame 100 kg) :
19.7.3.1 With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.65 m = 0.765 cum

1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
= 0.811 cum
= 0.803 cum Say 0.80 cum
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum

= 0.249 cum say 0.25
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum

Add extra concreting 1x(0.56+0.79)x0.15x0.15 m = 0.03 cum
Total= 0.369 cum

= 0.332 cum Say 0.33 cum
0115 Coolie day -0.6200

Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg.
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
3860 560 mm dia cover with frame (Heavy duty) each 1.0000
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
sewer bricks conforming to IS:4885 in cement mortar 1:4 (1
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
Total= 0.811 cum
= 0.803 cum Say 0.80 cum
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum

= 0.249 cum say 0.25
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
Total= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum

Add extra concreting 1x(0.56+0.79)x
0.15x0.15 m = 0.03 cum
= 0.369 cum
= 0.332 cum Say 0.33 cum
0115 Coolie day -0.6200

Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
3860 560 mm dia cover with frame (Heavy duty) each 1.0000
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
19.8 E extra for depth for manholes :

19.8.1 Size 90x80 cm
designation 7.5
MATERIAL
Brick work with bricks of class designation 7.5 in cement
mortar 1:4 (1 cement : 4 coarse sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum
6.1.1 Rate as per item no. 6.1.1 of S.H : brick work cum 0.9900
3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say

MATERIAL
bricks conforming to IS : 4885 in cement mortar 1:4 (1 cement
: 4 coarse sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum

3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say
19.8.2 Size 120x90 cm

designation 7.5
MATERIAL
mortar 1:4 (1 cement 4: coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum
6.1.1 Rate as per item no. 6.1.1 of S.H : brick work cum 1.1800
4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say

Details of cost for one metre MATERIAL
bricks conforming to IS :4885 in cement mortar 1:4 (1 cement:
4 coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum

4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say
19.9 Constructing brick masonry circular type manhole 0.91 m

internal dia at bottom and 0.56m dia at top in cement mortar
1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm
thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement, foundation
concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size), and making necessary
channel in cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size) finished with a
floating coat of neat cement, all complete as per standard
design :
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty,
HD-20 grade designation) 560 mm internal diameter
conforming to I.S. 12592, total weight of cover and frame to
be not less than 182 kg., fixed in cement concrete 1:2:4 (1
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at the
external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5
MATERIAL
1.67x1.67x0.225 m = 0.63 cum
Brick work with bricks of class designation 75 in cement
Curved on plan 3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
Total= 0.557
Deduct arch ring and portion of pipe
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in arches with 7.5 class designation brick in cement
mortar 1:3 ( 1 cement : 3 fine sand )
2x½x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
6.9 Rate as per item no 6.9 of SH : Brick Work cum 0.0200
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size )
For benching : 3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
Total = 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2² = (-) 0.016 cum
= 0.119 cum Say 0.12 cum
stone aggregate : 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15
m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum
Total = 0.086 cum Say 0.09 cum
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x
3.14x0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
7135 Circular shape 560 mm dia precast R.C.C. manhole cover with each 1.0000
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say

MATERIAL
stone aggregate: 40 mm nominal size)
1.67x1.67x0.225 m = 0.63 cum
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in arches with modular extruded brunt fly ash clay
sewer bricks conforming to IS : 4885 in cement mortar 1:3 ( 1
cement : 3 fine sand )
2x½x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
6.37 Rate as per item No 6.37 of SH : Brick Work cum 0.0200
For benching :
3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
Total= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)² = (-) 0.016 cum
For fixing cover : 3.14/4 x d² x thickness
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x3.14x
0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.1 Extra depth for circular type manhole 0.91m internal dia (at
bottom) beyond 0.91 m to 1.67 m
designation 7.5
Detail of cost of 0.76 m depth
Brick work in foundation with 7.5 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse sand)
stone 20mm nominal size)
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with neat cement.
Cost for 0.76 metre
Cost for 1.00 metre
Say
19.10.2 With Sewer bricks conforming IS : 4885

Detail of cost of 0.76 m extra depth
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work 0.6300

Cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded
stone 20mm nominal size)
with floating coat of neat cement.
Cost for 0.76 metre
Cost for 1.00 metre
Say
19.11 Constructing brick masonry circular manhole 1.22 m internal
dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1
cement :4 coarse sand) inside cement plaster 12 mm thick
with a floating coat of neat cement foundation concrete 1:3:6
nominal size) and making necessary channel in cement
aggregate 20 mm nominal size) finished with a floating coat of
neat cement, all complete as per standard design :
19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20
grade designation) 560 mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than
182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
including centering, shuttering all complete. (Excavation, foot
rests and 12 mm thick cement plaster at the
external surface shall be paid for separately) :
designation 7.5
MATERIAL
stone aggregate 40mm nominal size)
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total= 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total = 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum
mortar 1:3 ( 1 cement : 3 coarse sand )
2x½x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum

For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³ =0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m : (-) = 0.037 cum
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
Total= 4.483 sqm Say 4.48 sqm
LABOUR
S.F.R.C manhole cover
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.11.1.2 With Sewer bricks conforming IS : 4885

MATERIAL
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total = 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 1.320-0.026 = 1.294
Say 1.29 cum
sewer bricks in cement mortar 1:3 ( 1 cement : 3 fine sand )
2x½x3.14x0.25 m x0.230x0.10 m = 0.018 cum

Say 0.02 cum
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³
=0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-)
= 0.0216 cum
3.14/4(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-) 0.037 cum
4.2.3 Rate as per item no 4.2.3 of SH : Concrete cum 0.0900
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
LABOUR
S.F.R.C manhole cover and frame
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.12 Extra depth for circular type manhole 1.22 m internal dia (at
bottom) beyond 1.68 m to 2.29 m :
designation 7.5
Cost for 0.61 metre
Cost for 1.00 metre
Say


Cost for 0.61 metre
Cost for 1.00 metre
Say
19.13 Constructing brick masonry circular manhole 1.52 m internal

dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1
cement : 4 coarse sand) inside cement plaster 12 mm thick
with a floating coat of neat cement, foundation concrete 1:3:6
nominal size) and making necessary channel in cement
aggregate 20 mm nominal size) finished with a floating coat of
neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20
grade designation) 560 mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than
182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
including centering, shuttering all complete. (Excavation, foot
rests and 12 mm thick cement plaster at the external surface
shall be paid for separately) :
designation 7.5
MATERIAL
2.74x2.74x0.30 m = 2.25 cum
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total = 3.735 cum
2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)²x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum
Say 3.68 cum
mortar 1:3 (1 cement : 3 coarse sand )
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum

For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76)³ =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete cum 0.4200
3.14/4x(1.020)²x0.15 m =0.123 cum
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.13.1.2 With Sewer bricks conforming IS : 4885

MATERIAL
2.74x2.74x0.30 m = 2.25 cum
Brick work with bricks modular extruded brunt fly ash clay
sewer bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total= 3.735 cum
2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)²x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum
Say 3.68 cum
sewer bricks in cement mortar 1:3 ( 1 cement : 3 fine sand )
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum

For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76)³ =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum
= 0.419 cum Say 0.42 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete cum 0.4200
3.14/4x(1.020)²x0.15 m =0.123 cum
Net Quantity= 0.086 cum Say 0.09 cum
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
frame - H.D. - 20
9999 Sundries L.S. 16.9000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.14 Extra depth for circular type manhole 1.52 m internal dia (at
bottom) beyond 2.30 m :
designation 7.5
mortar 1:4 (1 cement: 4 coarse sand)
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
Cost for 1.88 metre
Cost for 1.00 metre
Say

cement: 4 coarse sand)

12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
Cost for 1.88 metre
Cost for 1.00 metre
Say
19.15 Providing M.S. foot rests including fixing in manholes with

20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3
as per standard design :
19.15.1 With 20x20 mm square bar

Details of cost for one M.S foot rests
MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137 kg/m = 0.024
1006 Mild steel square bars quintal 0.0240
9988 Carriage, painting, and other sundries L.S. 1.8200
LABOUR for fabrication
0.20x0.20x0.10 m = 0.004 cum
LABOUR for fixing M.S. foot rests
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.15.2 With 20 mm diameter round bar

MATERIAL
M.S. round brass20 mm dia 0.75 m @ 2.47kg/m = 0.018 q

0.20x0.20x0.10 m = 0.004 cum
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.16 Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910, on 12 mm dia
steel bar conforming to IS: 1786, having minimum cross
section as 23 mmx25 mm and over all minimum length 263
mm and width as 165 mm with minimum 112 mm space
between protruded legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and adequate
anchoring projections on tail length on 138 mm as per
standard drawing and suitable to with stand the bend test and
chemical resistance test as per specifications and having
manufacture's permanent identification mark to be visible
even after fixing, including fixing in manholes with 30x20x15
cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) complete as per
design.

MATERIAL
7354 Plastic encapsuled M.S. foot rest
30x20x15 cm each 1.0000
9988 Carriage and other sundries L.S. 1.8200
Cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded
( 0.30x0.20x0.15 = 0.009 cum)
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.17 Replacement of M.S. foot rests in manholes including

dismantling concrete blocks and fixing with 20x20x10 cm
cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size):
19.17.1 With 20x20 mm square bar

MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137
kg/m =0.024 q
1006 Mild steel square bars quintal 0.0240
0.20x0.20x0.10 m = 0.004 cum
LABOUR
for dismantling old forts rest cutting holes and fixing new M.S.
foot rests
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.17.2 With 20 mm diameter round bar

MATERIAL
M.S. round bars 20 mm dia 0.75 m @
2.47 kg/m =0.018 q
0.20x0.20x0.10 m = 0.004 cum
LABOUR
for dismantling old forts rest cutting holes and fixing new M.S.
foot rests
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight of

the cover to be not less than 23 kg
Details of cost for one cover
MATERIAL
1355 Rectangular cover 455x610mm without frame (low duty) each 1.0000
9977 Carriage of C.I. Manhole cover L.S. 7.1500

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cover
Say
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the
cover to be not less than 58 kg
MATERIAL
1357 500 mm dia cover without frame (medium duty) each 1.0000
9977 Carriage of C.I. cover L.S. 13.4700
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the
MATERIAL
3861 560 mm dia cover without frame (Heavy duty) each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight of

the cover to be not less than 23 kg
MATERIAL
1355 Rectangular cover 455x610mm without frame (low duty) each 1.0000
9977 Carriage of C.I. Manhole cover L.S. 7.1500

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cover
Say
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the
MATERIAL
1357 500 mm dia cover without frame (medium duty) each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the
MATERIAL
3861 560 mm dia cover without frame (Heavy duty) each 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 no.
Say
19.19 Providing and fixing in position pre-cast R.C.C. manhole cover

and frame of required shape and approved quality
19.19.1 L D- 2.5
19.19.1.1 Rectangular shape 600x450 mm internal dimensions
MATERIAL
7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover each 1.0000
with frame - L.D. - 2.5
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade
1.00x0.85x0.15 = 0.1275 cum
Less cover with frame 0.85x0.70x0.15 = (-) 0.0893 cum
= 0.0382 cum Say 0.04 cum
9977 Carriage of R.C.C cover with frame L.S. 6.7600
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.1.2 Square shape 450 mm internal dimensions

MATERIAL
7131 Square shape 450x450 mm precast R.C.C. manhole cover with each 1.0000
frame - L.D. - 2.5
9977 Carriage of manhole cover L.S. 6.7600
0.725x0.725x0.15 = 0.0788 cum
Less cover with frame
0.575x0.575x0.15 = (-) 0.0496 cum
= 0.0292 cum Say 0.03 cum
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.1.3 Circular shape 450 mm internal diameter

MATERIAL
frame - L.D. - 2.5
3.14/4x(0.775)²x0.15 = 0.0708 cum
3.14/4x(0.625)²x0.15 = (-) 0.0460 cum
= 0.0248 cum Say 0.03 cum
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.2 M D - 10
19.19.2.1 Square shape 450 mm internal dimension
MATERIAL
7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover each 1.0000
with frame - M.D. - 10
0.95x0.95x0.15 = 0.1354 cum
0.80x0.80x0.15 = (-) 0.096 cum
= 0.0394 cum Say 0.04 cum
9999 Sundries L.S. 16.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

MATERIAL
frame - M.D. - 10
3.14/4x(0.95)²x0.15 = 0.1064 cum
3.14/4x(0.8)²x0.15 = (-) 0.0754 cum
= 0.031 cum Say 0.03 cum
9999 Sundries L.S. 16.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.3 H D - 20
MATERIAL
frame - H.D. - 20
3.14/4x(1.05)²x0.15 = 0.1299 cum
3.14/4x(0.9)²x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.4 EHD - 35
19.19.4.1 Circular shape 560 mm internal dia
MATERIAL
frame - E.H.D. - 35
3.14/4x(1.05)²x0.15 = 0.1299 cum
3.14/4x(0.9)²x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.20 Supplying and fixing C.I. cover 300x300 mm without frame for
gully trap (standard pattern) the weight of
cover to be not less than 4.5 kg
MATERIAL
1353 C.I.cover without frame 300x300mm inside i.e.cover of 4.50 each 1.0000
kg
9988 Carriage for cover L.S. 2.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 cover
Say
19.21 Making connection of drain or sewer line with existing
manhole including breaking into and making good the walls,
floors with cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) cement
plastered on both sides with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat cement and
making necessary channels for the drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter

Details of cost for one connection
MATERIAL
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
= 0.30x0.30x0.23 m = 0.0207 cum
Less pipe = 1/2x3.14x0.23x0.23x0.23 = 0.0096 cum
= 0.0111 cum Say 0.01 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete cum 0.0100
12 mm cement plater 1:3 ( 1 cement : 3 coarse sand ) finished
with a floating coat of neat cement
2x0.35x0.35 =0.25sqm
LABOUR
(For cutting holes average size 30x30 cm in 23 cm thick wall
and making channel etc.)
9999 Add for delay sundries etc. L.S. 20.1500
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 connection
Say

MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4
grade stone aggregate 20 mm nominal size )
= 0.35x0.35x0.30 m = 0.037 cum
= 0.016 cum Say 0.02 cum
2x0.40x0.40 =0.32 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4
grade stone aggregate 20 mm nominal size )
= 0.50x0.50x0.30 m = 0.075 cum
= 0.027 cum Say 0.03 cum
2x0.55x0.55 =0.605 sqm Say 0.60 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say
19.22 Providing sand cast iron drop connection externally for 60 cm

drop from branch sewer line to main sewer manhole including
inspection and cleaning eye with chain and lid, sand cast iron
drop pipe and bend encased all-round with cement concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size) with all centering and shuttering required,
cutting holes in walls and making good with brick work in
cement mortar 1:4 (1 cement : 4 coarse sand) plastered with
cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the
manhole wall, lead caulked joints between sand cast iron
pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine
sand) joints between sand cast iron tee and S.W. pipe, making
required channels complete as per standard design and
specifications :
19.22.1 100 mm dia sand cast iron drop connection

Details of cost for one drop connection
MATERIAL
long: 100mm dia
= 38+30+33 =101 cm say 1 metre
Length of pipe = 1m. Hence, Qty = 1 /1.8 =0.55556 Nos
9977 Carriage of pipe L.S. 1.4300
Cutting charges
18.83.2 Rate as per item no 18.83.2 of SH: Water supply each cut 3.0000
1336 Clearing eye with chain and lid 100 mm dia each 1.0000
Brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
0.20x0.20x0.23 = 0.009 cum

Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002 cum
Net Qty= 0.009 - 0.002 = 0.007 cum
Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded
0.40x0.45x1.05 m = 0.189 cum
0.40x0.25x0.40 = 0.040 cum
Total= 0.229 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.50 = 0.012 cum
Toothing portion
2x0.40x0.05x0.10 m = 0.004 cum = 0.016 cum
Net Qty= 0.229-0.016 = 0.213 cum Say 0.21 cum
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Providing lead caulked joints to 100 mm diameter pipe and
special
12.39.1 Rate as per item no. 12.39.1 of SH : Roofing each 4.0000
9999 Providing joint to S.W. pipe with cement mortar 1:1 (1 cement L.S. 26.9100
: 1 fine sand)
Form work
1.30x1.05 m = 1.36 sqm
9988 Sundries including carriage of bends etc. L.S. 26.9100
LABOUR
For cutting holes 5 cm deep in alternate course of brick work
benching and channel
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one drop connection
Say
19.22.2 150 mm dia sand cast iron drop connection

Details of cost for one drop connection
MATERIAL
long: 150mm dia
= 34.5+30+37 =101.5cm say 1.00m
Length of pipe = 1m. Hence, Qty = 1 / 1.8 =0.55556 No.s
9977 Carriage of pipe L.S. 1.8200
Cutting charges
18.83.4 Rate as per item no 18.83.4 of SH Water Supply each cut 3.0000
1337 Clearing eye with chain and lid 150 mm dia each 1.0000
7087 S.C.I. Tee 150 mm each 1.0000
Brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
0.20x0.20x0.23 = 0.009 cum

Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004 cum
Net Qty= 0.005 cum
0.45x0.50x1.15 m = 0.259 cum
0.45x0.25x0.45 = 0.0510 cum
= 0.310 cum
Less pipe portion
1/4x3.14x0.15x0.15x1.50 = 0.027 cum
Toothing portion
3x0.45x0.05x0.10 m = 0.004 cum
= 0.027 + 0.004 = 0.031 cum
Net Qty 0.310-0.031 = 0.279 cum. Say 0.28 cum
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Providing lead caulked joints to 150 mm diameter pipe and
special
12.39.2 Rate as per item no. 12.39.2 of SH : Roofing each 4.0000
9999 Providing joint to S.W. pipe with cement mortar 1:1 (1 cement L.S. 39.9100
: 1 fine sand)
Form work
1.450x1.15 m = 1.67 sqm
9988 Sundries including carriage of bends etc. L.S. 34.0600
LABOUR
For cutting holes 45 holes 5 cm deep toothing in alternate
course of brick work benching and making channel

TOTAL
TOTAL
TOTAL
TOTAL
Cost of one drop connection
Say
19.23 Extra for depths beyond 60 cm of sand cast iron drop

connection complete:
19.23.1 For 100 mm dia sand cast iron drop connection
MATERIAL
long: 100mm dia
Length of pipe = 1m. Hence, Qty = 1 / 1.8 = 0.55556 Nos.
0.40x0.45x1.00 mm = 0.18 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.00 = 0.008 cum
Toothing portion
5x0.40x0.05x0.10 m = 0.010 cum
Total= 0.018 cum
Net Qty= 0.18-0.018 = 0.162 cum Say
0.16 cum
Form work
1.30x1.00 m = 1.30 sqm
LABOUR
For cutting holes 5 cm deep in alternate course of brick work

TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
19.23.2 For 150 mm dia sand cast iron drop connection

MATERIAL
long: 150mm dia
Length of pipe = 1m. Hence, Qty
= 1 / 1.8 = 0.55556 Nos.
0.45x0.50x1.00 mm = 0.225 cum
Less pipe portion
1/2x3.14x0.15x0.15x1.00 = 0.018 cum
Toothing portion
5x0.45x0.05x0.10 m = 0.011 cum
Total = 0.029 cum
Net 0.225-0.029 = 0.196 cum Say 0.20 cum
Form work
1.45x1.00 m = 1.45 sqm
LABOUR
For cutting 5 cm deep in alternate course of brick work
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover

with frame, including stacking of useful materials near the site
and disposal of unserviceable materials within 50 m lead as
per direction of Engineer-in-charge:
19.24.1 Rectangular manhole 90x80 cm and 45 cm deep

Details of cost of a manhole 90x80 cm and 45 cm deep
Dismantling of cement concrete 1:4:8 (1 cement : 4 coarse
sand 8 : aggregate stone 40 mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
15.2.2 Rate as per item no. 15.2.2 of SH : Dismantling and cum 0.4300
demolishing
Dismantling of second class brick work in cement mortar 1:4
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)² x0.23m = (-) 0.008 cum
Net Qty 0.348 - 0.008 = 0.340 cum
15.7.4 Rate as per item no. 15.7.4 of SH :dismantling and cum 0.3400
demolishing
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse
For benching 2x0.90x(0.80/2) x(0.30+0.20)/2 = 0.18 cum

Net qty= 0.16 cum
demolishing
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4

grade stone aggregate 20 mm nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Net qty= 0.215 cum Say 0.22 cum
15.3 Rate as per item no 15.3 of SH : Demolishing and dismantling cum 0.2200
9999 Removal of C.I. Cover with frame L.S. 7.1500

TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.24.2 Rectangular manhole 120x90 cm and 90 cm deep

Details of cost of a manhole 120x90 and 90 cm deep
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
demolishing
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)²x0.23 m = (-) 0.008 cum
Net qty = 0.934 cum Say 0.93 cum
demolishing
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 2.70 cum

= 0.249 cum say 0.25
demolishing
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum
Net qty = 0.31 cum

TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.24.3 Rectangular arch type manhole 140x90 cm and 2.45 m deep

Details of cost of a manhole 140x90 cm and 2.45 m deep

2.16m x 1.66m x 0.20m = 0.72 cum
demolishing
Brick work in item 5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum = 2.561 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)²x0.23m = 0.008 cum = (-) 0.026 cum
Net qty = 2.561 - 0.026 = 2.535 cum
Say 2.54 cum
Brick work in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
= 0.345 cum Say 0.35 cum
Net qty = 2.54+0.35 = 2.89 cum
demolishing
2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum

Less pipe 1.4x3.14/4x(0.15)² = (-) 0.025 cum
Net qty = 0.290 cum
demolishing
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum
= 0.187 cum Say 0.19 cum

9999 Removal of M.S foot rest L.S. 8.0600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.24.4 Circular manhole 122 cm diameter and 1.68 m deep

Details of cost of a manhole 1.22 m internal diameter 1.68 m
deep
sand : 6 aggregate stone 40 mm nominal size)
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
15.2.1 Rate as per item no 15.2.1 of SH : Dismantling cum 1.1800
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
2x½x3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.23 = 0.008 cum
= 0.026 cum
Brick work in arches
2x1/2x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
Total = 1.294+0.02 = 1.1.314 cum. Say 1.131 cum
demolishing
Dismantling cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³
Total =0.043 cum
0.024 + 0.043 = 0.277 cum
Less pipe :1.22x3.14/4x(0.15)² = (-) 0.0216 cum
Net Qty. = 0.277 - 0.0216 = 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15 m =0.123 cum
= 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
15.2.1 Rate as per item no 15.2.1 of SH : Demolishing and cum 0.3500
dismantling
9999 Removal of S.F.R.C cover with frame size 560 mm diameter L.S. 7.1500
(medium duty)
9999 Removal of M.S. foot rests L.S. 8.0600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.25 Extra for depth of manholes dismantled :

19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth

4.32x0.23x1.0m = 0.994 cum Say 0.99 cum
demolishing
9999 Removing of M.S. foot rests L.S. 1.8200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
19.25.2 Rectangular manhole 120x90 cm and beyond 90 cm depth

5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
demolishing
9999 Removing of M.S. foot rests L.S. 1.8200
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
19.25.3 Rectangular arch type manhole 140x90 cm and beyond 2.45

m depth (up to 4.25 m depth)
Dismantling IInd class brick work in cement mortar 1:4 (1
Cement : 4 Coarse sand) for 2.45 depth
Qty for 2.45m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum
Total = 2.561 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)²x0.23m = 0.008 cum
Total deduction= = (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
Total for 4.45 m depth 2.54 + 0.35 = 2.89 cum
Qty for 4.25m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx2.95m = 2.660 cum
Total = 4.184 cum
2x½x3.14x0.70mx0.23x0.1m = 0.051 cum
2x3.14/4x(0.60)²x0.23 = 0.130 cum
Total deduction== (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum
Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.70mx0.23x0.1m = 0.051 cum
Total for 2.25 m depth = 4.0+ 0.38 =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
demolishing
Dismantling cement concrete 1:2:4 (1 Cement : 2 coarse
sand : 4 graded stone aggregate 40mm nominal size)
Qty for 4.25m depth

2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.60)²(-) = 0.396 cum
= 0.486 cum Say 0.49 cum
Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe :1.4x3.14/4x(0.15)²(-) = 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
15.2.1 Rate as per item no 15.2.1 of SH : Demolishing and cum 0.2000
dismantling
Cost for 1.8 metre depth
Cost for 1 metre depth
Say
19.25.4 Circular manhole 122 cm diameter and beyond 1.68 m depth

(up to 2.29 m depth)
Dismantling cement concrete 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 40mm nominal size)
1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum.

15.2.1 (Rate as per item No.15.2.1 of SH. dismantling and cum 1.1800
Demolishing)
Dismantling IInd class brick work in cement mortar 1:4 (1
Cement : 4 Coarse sand)
Curved on plan
3.14x1.45x0.85x0.23 = 0.891
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total = 0.891 + 1.069 = 1.96 cum
2x1/2x3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.23 = 0.008 cum
Total deduction = 0.026 cum
Qty in arch
2x1/2x3.14x0.25 m x0.23x0.10 m
= 0.018 cum Say 0.02 cum
Total = 1.93 + 0.02 = 1.97 cum
15.7.4 Rate as per item no 15.7.4 of SH : Dismantling and cum 1.9700
demolishing
sand : 4 graded stone aggregate 20 mm nominal size
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³
=0.043 cum
= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
Net qty== 0.2554 cum Say 0.26 cum
For fixing cover : 3.14/4 x d2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-)0.037 cum
Total = 0.26 + 0.09 = 0.35 cum
15.2.1 Rate as per item no 15.2.1 of SH : Dismantling cum 0.3500
9999 Removal of SFRC cover L.S. 7.1500
9999 Removal of M.S. foot rests L.S. 8.0900
Deduct cost of dismantling manhole 1.68m deep
19.24.4 Rate as per Item No.19.24.4 of SH: DRAINAGE each -1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of manhole 0.61m depth
Cost per metre depth
Say
19.26 Raising manhole cover and frame slab to required level

including dismantling existing slab and making good the
damage as required (Raising depth of manhole to be paid
separately) :
19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600 x

450 mm of grade LD - 2.5
Details of cost for one manhole
Dismantling of R.C.C slab of 1:1.5:3 (1 cement : 1.5 coarse
sand (Zone - III): 3 aggregate stone 20 mm nominal size) =
1.36x1.26x0.15 = 0.257 cum

Less cover with frame portion
0.85x0.70x0.15 =(-) 0.089 cum
Net qty=0.168 cum Say 0.17 cum
15.3 Rate as per item no. 15.3 of SH : Dismantling and demolishing cum 0.1700
9999 Removal of R.C.C cover and frame L.S. 7.1500

Removal of R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3
graded stone aggregate 20 mm nominal size )
For raised slab = 1.36x1.26x0.15 = 0.257 cum
Less portion cover with frame = 0.85x0.70x0.15 =(-) 0.089 cum
Net qty = 0.168 cum Say 0.17 cum

5.3 Rate as per item no. 5.3 of SH : RCC work cum 0.1700
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.60x0.45 =(-) 0.27 sqm
Net qty = 0.45 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC work sqm 0.4500
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm
dia of grade MD - 10
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame
3.14/4x(0.80)²x0.15 =(-) 0.075 cum
Net qty 0.264 cum Say 0.26 cum

R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded
1.66x1.36x0.15 = 0.339 cum
Less portion cover with frame =
3.14/4x0.80x0.80x0.15 =(-)0.075 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² =(-) 0.196 sqm
Net qty= 0.884 sqm Say .88 sqm
9999 Sundries L.S. 16.6400
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm

dia of grade HD - 20
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame 3.14/4x(0.90)²x0.15 =(-) 0.095
cum
Net qty 0.244 cum Say 0.24 cum
15.3 Rate as per item no 15.3 of SH : Dismantling and demolishing cum 0.2400

R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded
1.66x1.36x0.15 = 0.339 cum
Less portion cover with frame =
3.14/4x0.90x0.90x0.15 =(-)0.095 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² =(-) 0.246 sqm
Net qty= 0.834 sqm Say .83 sqm
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia
of grade EHD - 35
Dismantling of C.C slab of 1:2:4 (1 cement 2 coarse sand : 4
aggregate stone 20 mm nominal size)
= 3.14/4x(0.985)²x0.15 = 0.114 cum
Less cover =3.14/4x(0.90)²x0.15 =(-) 0.095 cum

C.C work 1:2:4 ( 1 cement : 2 coarse sand 4 graded stone
aggregate 20 mm nominal size )
3.14/4x(0.985)²x0.15 = 0.114 cum
Less portion cover with frame = 3.14/4x(0.90)²x0.15 =(-) 0.095
cum
9999 Sundries L.S. 20.2800
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.27 Constructing brick masonry road gully chamber 50x45x60 cm

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
including 500x450 mm pre-cast R.C.C. horizontal grating with
frame complete as per standard design :
designation 7.5
MATERIAL
1.11mx1.06mx0.15 m= 0.176 cum Say 0.18 cum
Brick work in bricks of class designation 7.5 in cement mortar
1:4 ( 1 cement : 4 coarse sand)
2.82 m x 0.23m x0.45 m = 0.29 cum
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished
Wall : 1.90x0.45 m = 0.855 sqm
Bed : 0.45x0.50 m = 0.225 sqm
Total= 1.080 sqm
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum
Form work
3.50x0.15 m = 0.525 sqm Say 0.53 sqm
7380 Precast R.C.C. grating with frame 500x450 mm horizontal each 1.0000
grating
9977 Carriage of R.C.C. grating L.S. 7.1500
9999 Fixing R.C.C. grating L.S. 5.3300
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.28 Constructing brick masonry road gully chamber 45x45x77.5

cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand
) with precast R.C.C. vertical grating complete as per standard
design :
designation 7.5
1.06mx1.06mx0.15 m= 0.17 cum
2.72 m x 0.23m x0.70 m = 0.438 cum
Deduct opening 0.45x0.23x0.10 m = 0.01 cum
Block 3x(0.075)³ = 0.001 cum
Total deduction = 0.011 cum
Net qty. = 0.438 (-) 0.011 = 0.427 cum
Say 0.43 cum
Wall : 1.80x0.70 m = 1.26 sqm
Bed : 0.45x0.45 m = 0.202 sqm
Top : 0.45x0.20 m = 0.09 sqm
Sides : 2x0.20x0.10 m = 0.04 sqm
Total= 1.592 sqm
Deduct opening
0.45x0.10 m = 0.045 sqm
Net qty. = 1.592 (-) 0.045 = 1.547 cum
Say 1.55 cum
Block = 3x(0.75)³ = 0.001 cum
R.C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size)
0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum
115 Coolie day -0.1130

Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm
Mild steel reinforcement for R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each 1.0000
9999 Fixing and carriage of R.C.C. grating L.S. 20.6700

TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.29 Constructing brick masonry road gully chamber 110x50x77.5

cm with bricks in cement mortar 1:4 (1 cement : 4 coarse
sand) including 500x450 mm precast R.C.C. horizontal grating
with frame and vertical grating complete as per standard
design :
designation 7.5
1.71mx1.11mx0.15 m = 0.285 cum Say 0.29 cum
1.91 m x 0.23m x0.45 m = 0.199 cum
2.20mx0.23mx0.70 m = 0.354 cum
Total= 0.553 cum
Deduct lintel portion
2x0.23x0.20x0.20 m = (-) 0.018 cum
Net Qty= 0.0535 cum Say 0.54 cum
Wall : 1.80x0.70 m = 1.26 sqm
Wall : 1.40x0.45 m = 0.63 sqm
Bed : 1.10x0.50 m = 0.55 sqm
Total= 2.44 sqm
Deduct 2x0.20x0.20 m = (-) 0.08 sqm
Net Qty= 2.36 sqm
Block = 1.92x0.23x0.15 = 0.07 cum
R.C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
0.88x0.96x0.075 m = 0.063 cum Say 0.06 cum

R.C.C. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone
in lintels 1x0.96x0.20x0.20 m = 0.04 cum
Form work
Slab bottom 0.50x0.65 m = 0.325 sqm
Outer periphery 3.50x0.075 m = 0.263 sqm
2.20x0.15 m = 0.330 sqm
= 0.918 sqm Say 0.91 sqm
Mild steel reinforcement for R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00 kg
7380 Precast R.C.C. grating with frame 500x450 mm horizontal each 1.0000
grating
9977 Carriage of R.C.C. grating L.S. 7.1500
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each 1.0000
9999 Labour for fixing precast R.C.C. grating

and frame L.S. 34.0600
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.30 Constructing brick masonry chamber for underground C.I.

inspection chamber and bends with bricks in cement mortar
1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover
with frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1
cement : 1.5 fine sand : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement : 3
coarse sand), finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete as per
standard design:
19.30.1 Inside dimensions 455x610 mm and 45 cm deep for single

pipe line :
designation 7.5
1.22mx1.065mx0.15 m= 0.195 cum Say 0.20 cum
3.05 m x 0.23m x0.30 m = 0.210 cum
Less pipe
2x3.14/4x(0.10)²x0.23 m = (-) 0.004 cum
Wall : 2.13x0.30 m = 0.639 sqm
Bed : 0.61x0.455 m = 0.278 sqm
Total= 0.917 sqm
Less pipe 2x3.14/4x(0.10)² = (-) 0.016 sqm
Net Qty= 0.901 sqm Say 0.90 sqm
Cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3
3.05x0.23x0.15 = 0.105 cum say 0.11 cum
5.3 Rate as per item no 5.3 of SH : RCC cum 0.1100
Form work
9977 Carriage of C.I.cover and frame L.S. 7.1500
9999 Painting of C.I. Cover and frame with coal tar L.S. 7.1500
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line

with one or two inlets :
designation 7.5
1.31mx1.11mx0.15 m= 0.22 cum
1:4 ( 1 cement : 4 fine sand)
3.32 m x 0.23m x0.30 m = 0.229 cum
Less pipe
3x3.14x(0.10)²x0.23 m = (-) 0.005 cum
Wall : 2.40x0.30 m = 0.72 sqm
Bed : 0.70x0.50 m = 0.35 sqm
= 1.07 sqm
Less pipe 3x3.14/4x(0.10)² = (-) 0.02 sqm
Net Qty= 1.05 sqm
R.C.C 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone
1.16x0.96x0.15 = 0.167 cum
Deduct cover
0.61x0.45x0.15 m = (-) 0.042 cum
Form work
Inside area of chamber : 0.70x0.50 m = 0.35 sqm
Outer periphery 4.00x0.15 m = 0.60 sqm = 0.95 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
= 0.672 sqm Say 0.67 sqm

M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
9977 Carriage of C.I. Cover and frame L.S. 7.1500
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line
with three or more inlets :
designation 7.5
Details of cost of one chamber
1.46mx1.21mx0.15 m= 0.26 cum

3.82 m x 0.23m x0.30 m = 0.26 cum
Less pipe
5x3.14x(0.10)²x0.23 m = (-) 0.009 cum
Wall : 2.90x0.30 m = 0.87 sqm
Bed : 0.85x0.60 m = 0.51 sqm
Total= 1.38 sqm
Less pipe 5x3.14/4x(0.10)² = (-) 0.04 sqm
Net Qty= 1.34 sqm
1.31x1.06x0.15 = 0.208 cum
Deduct cover
0.61x0.455x0.15 m = (-) 0.042 cum

Form work
Inside area of chamber : 0.85x0.60 m = 0.511 sqm
Total= 1.186 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
Net Qty= 0.908 sqm Say 0.91 sqm
M.S.reinforcement for slab for 0.17 cum
@ 48.06 kg/cum
= 48.06x0.17cum = 8.17 kg
9977 Carriage of C.I. Cover and frame L.S. 7.1500
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.31 Extra for depth beyond 45 cm of brick masonry chamber :
19.31.1 For 455x610 mm size

designation 7.5
3.05 m x 0.23m x1.00 m = 0.70 cum
12 mm cement plaster 1:3 (1 cement : 3 coarse sand finished
Wall : 2.13x1.00 m = 2.13 sqm
TOTAL
Cost per metre
Say
19.31.2 For 500x700 mm size

designation 7.5
1:4 ( 1 cement : 4 fine sand)
3.32 m x 0.23m x1.00 m = 0.76 cum
Wall : 2.40x1.00 m = 2.40 sqm
TOTAL
Cost per metre
Say
19.31.3 For 600x850 mm size

designation 7.5
1:4 ( 1 cement: 4 coarse sand)
3.82 m x 0.23m x1.00 m = 0.88 cum
Wall : 2.90x1.00 m = 2.90 sqm
TOTAL
Cost per metre
Say
19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45
cm dry brick honey comb shaft with bricks and S.W. drain pipe
100 mm diameter, 1.8 m long complete as per standard
design.
designation 7.5
Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth
3.14/4x(2.5)²x3m = 14.73 cum

2.26.1 Rate as per item no. 2.26.1 of SH : Earth work cum 7.3700
= 3.14/4x(2.5)² x 1.5 m = 7.37 cum
2nd class bricks
perimeter = 4x0.35 =1.40 m
Area = 1.40x2.925 m = 4.1 sqm
Number of brick = 4.1x487x0.066 = 131.78
Wastage 10% = 13.718
Total= 144.96 Say 145 numbers
designation 7.5
Brick bats = 3.14/4x(1.2)²x2.925m =3.33 cum
Deduct = 0.45x0.45x2.925 m = 0.59 cum
Net qty= 2.74 cum
362 Brick bats cum 2.7400
Brick aggregate 50 to 80 mm nominal size =
3.14x1.50x0.03x2.925 m = 4.13 cum
Brick aggregate 40 mm nominal size
= 3.14x2.15x0.35x2.925 m =6.91 cum
Carriage of brick bats and aggregate
9999 Single matting 2.5x2.5 m = 6.25 sqm L.S. 112.1400
Precast R.C.C.slabs 7.5 cm thick in
cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3
0.45x0.45x0.075 m = 0.02 cum
5.12 Rate as per item no 5.12 of SH : RCC cum 0.0200
Reinforcement @ 80 kg/cum = 0.02x80 =1.6 kg
2nd class brick edging laid length wise with half brick depth
3.14x2.6 m =8.17 m
16.8.1 Rate as per item no. 16.8.1 of SH : Road work metre 8.1700
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one soak pit
Say
19.33 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats

including S.W. drain pipe 100 mm diameter and 1.20 m long
complete as per standard design.

Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth
1.2x1.2x1.2m = 1.73 cum

362 Brick bats cum 1.7300
1.2x1.2x1.2 = 1.73 cum
16.8.1 Rate as per item no. 16.8.1 of SH : Road work metre 5.2000
Second class brick edging laid length wise with half brick
depth
9999 Sundries L.S. 25.8400
LABOUR
For filling brick bats
9999 Sundries L.S. 13.5200
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one soak pit
Say
19.34 Providing and fixing S.W. intercepting trap in manholes with

stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand)
including testing of joints etc. complete :
19.34.1 100 mm dia

MATERIAL
7128 S.W. intercepting trap 100 mm dia each 1.0000
9977 Carriage of trap L.S. 1.0400
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
19.34.2 150 mm dia

MATERIAL
7129 S.W. intercepting trap 150 mm dia each 1.0000
9977 Carriage of trap L.S. 2.0800
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one no.
Say
19.35 Providing and laying Non Pressure NP-3 class (Medium duty)
R.C.C. pipes including collars/spigot jointed with stiff mixture
of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete
19.35.1 450 mm dia RCC pipes.

Detail for 10 metre
MATERIALS :
1728 RCC pipe 450 mm dia NP-3 spigot metre 10.0000
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say
19.35.4 1000 mm dia RCC pipes. (Laying by manual/ mechanical
means)
Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

means)
Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

means)
Detail for 10 metre
MATERIALS :
2336 Carriage of RCC pipe above 1200 mm dia and up to 1800 mm 100 metre 0.1000
dia
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say
19.36 Providing and laying Non Pressure NP-4 class (Heavy duty)
R.C.C. pipes including collars/spigot jointed with stiff mixture
of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete

Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

Detail for 10 metre
MATERIALS :
1735 RCC pipe 600 mm dia pipe NP-4 spigot metre 10.0000
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

Detail for 10 metre
MATERIALS :
2331 R.C.C. pipes 900 mm dia 100 metre 0.1000
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

means)
Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

means)
Detail for 10 metre
MATERIALS :
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say

means)
Detail for 10 metre
MATERIALS :
2336 Carriage of R.C.C. pipes above 1200 mm dia and up to 1800 100 metre 0.1000
mm dia
sand)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate per metre
Say
20.1 Providing, driving with hydraulic piling rigs with power units
and installing driven cast-in-situ reinforced
cement concrete piles of grade M-25 of specified diameter
and length below the pile cap, to carry safe working load not
less than specified, excluding the cost of steel reinforcement
but including the cost of shoe and the length of pile to be
embedded in the pile cap etc. all complete. (Length of pile for
payment shall be measured from top of shoe to the bottom of
pile cap) :
20.1.1 400 mm dia piles

Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x0.40²x20 = 2.51 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 2.5100
9999 Sundries L.S. 175.0000
7181 C.I. pile shoe of 80 kg per pile kilogram 80.0000
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.0000
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power day 0.3600
unit
etc. including complete accessories and shifting at site.
0025 Hire and running charges of light crane. day 0.0600

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20 metre pile
Say

MATERIAL
Concrete -3.14/4x0.45²x20 = 3.18 cum
9999 Sundries L.S. 225.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925 cum
9999 Sundries L.S. 275.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.55²x20 = 4.75 cum
9999 Sundries L.S. 330.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
9999 Sundries L.S. 460.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
9999 Sundries L.S. 550.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.2²x9 = 10.17 cum
9999 Sundries L.S. 710.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.5²x9 = 15.90 cum
9999 Sundries L.S. 1115.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2 Boring, providing and installation bored cast-in-situ reinforced

and length below the pile cap, to carry a safe working load not
but including the cost of boring with bentonite solution and
temporary casing of appropriate length for setting out and
removal of same and the length of the pile to be embedded in
the pile cap etc. by percussion drilling using Direct mud
circulation (DMC) or Bailer and chisel technique by tripod and
mechanical Winch Machine all complete, including removal of
excavated earth with all its lifts and leads (length of pile for
payment shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tube well boring machine
shall not be used .

MATERIAL
Concrete 3.14/4x0.45²x20 = 3.18 cum
9999 Sundries L.S. 65.0000
MACHINERY
0015 Hire and running charges of Tripod and Mechanical Winch day 0.9400
machine complete with power unit and accessories

0026 Hire and running charges of bentonite pump. day 0.3800
0018 Hire and running charges of loader day 0.3000
LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925cum
9999 Sundries L.S. 80.0000
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
9999 Sundries L.S. 115.0000
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
9999 Sundries L.S. 130.0000
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2A Boring, providing and installation bored cast-in-situ reinforced
and length below pile cap, to carry a safe working load not
but including the cost of boring with bentonite solution and
temporary casing of appropriate length for setting out and
removal of same and the length of the pile to be embedded in
the pile cap etc. by Crawler mounted, telescopic boom
hydraulic pilling Rig all complete, including removal of
excavated earth with all its lifts and leads (length of pile for
payment shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tube well boring machine
shall not be used.
20.2A.1 600 mm dia piles

MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
9999 Sundries L.S. 110.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
9999 Sundries L.S. 130.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
9999 Sundries L.S. 155.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.20²x9 = 10.17 cum
9999 Sundries L.S. 200.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete 3.14/4x1.50²x9 = 15.90 cum
9999 Sundries L.S. 315.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.3 Boring with hydraulic piling rigs with power units, providing
and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in M-25 cement
concrete, to carry a safe working load not less than specified,
excluding the cost of steel reinforcement but including the
cost of boring with bentonite solution and the length of the
pile to be embedded in pile cap etc. all complete. (Length of
pile for payment shall be measured up to to the bottom of
pile cap) :

MATERIAL
R.C.C
Stem -3.14/4x(0.30)²x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)²x0.075 = 0.033 cum
2x 3.14/4x(0.525)²x0.150 = 0.065 cum
=0.778 cum
9999 Sundries L.S. 70.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
R.C.C
Stem -3.14/4x(0.40)²x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)²x0.1 = 0.079 cum
2x 3.14/4x(0.7)²x0.30 = 0.23 cum
= 1.478 cum
9999 Sundries L.S. 130.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
R.C.C
Stem -3.14/4x(0.45)²x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)²x0.113 = 0.112 cum
2x 3.14/4x(0.788)²x0.337 = 0.329 cum
= 1.906 cum
9999 Sundries L.S. 165.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
R.C.C
Stem -3.14/4x(0.50)²x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)²x0.125 = 0.153 cum
2x 3.14/4x(0.875)²x0.375 = 0.451 cum
= 2.396 cum
9999 Sundries L.S. 210.0000
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.4 Extra over single under ream for providing additional bulbs in
under reamed piles, under specified diameter(only the nos. of
extra bulbs are to be paid)

Details of cost for 1 bulb.
MATERIAL
Bulb - 0.033 cum
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 bulb
Say

MATERIAL
Bulb - 0.063 cum
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 bulb
Say

MATERIAL
Bulb - 0.081 cum
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 bulb
Say

MATERIAL
Bulb - 0.102 cum
MACHINERY
unit

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 bulb
Say
20.5 Providing, driving (with vibrating pile driving hammer
complete with power units & accessories) and installing
driven Pre-cast reinforced cement concrete piles of specified
diameter and length below the pile cap in M-25 cement
concrete to carry safe working load not less than specified
with a central through preformed hole with M.S. black pipe of
dia, 40 mm for grouting with cement sand grouting of mix 1:2
(1cement : 2 coarse sand) under sufficient positive pressure to
ensure complete filling including centring, shuttering, driving
and removing the steel casing pipe and lifting casing etc.
complete but excluding the cost of steel reinforcement.
(Length of pile for payment shall be measured from top of the
shoe to the bottom of pile cap).

MATERIAL
Concrete -3.14/4x(0.40)²x20 = 2.51 cum
5.19 Add Rate as per item no 5.19 of SH : RCC cum 2.5100
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -2.5100
Cement mortar 1:2 for grout
9999 Wooden block @ 1 block for 2 pile L.S. 442.0000
@ 80 kg per pile
@35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer day 0.3800
complete with power unit and accessories .

0028 Hire and running charges of crane 20 tonne capacity. day 0.0600
LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete -3.14/4x(0.45)²x20 = 3.18 cum
5.19 Add Rate as per item no 5.19 SH : RCC cum 3.1800
Cement mortar 1:2 for grout
9999 Wooden block @ 1 block per two piles L.S. 442.0000
@ 80 kg per pile
@ 35 kg per pile
MACHINERY

LABOUR
Work supervisor
0114 Beldar day 10.7800
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete -3.14/4x(0.50)²x20 = 3.925 cum
3.7 Cement mortar 1:2 for grout
Rate as per Item Number 3.7 of SH: Mortars cum 0.0250
@ 80 kg per pile
7182 M.S. clamps for pile shoe kilogram 35.0000
@ 35 kg per pile
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete -3.14/4x(0.55)²x20 = 4.75 cum
@ 80 kg per pile
7182 M.S. clamps for pile shoe kilogram 35.0000
@ 35 kg per pile
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete -3.14/4x(0.75)²x20 = 10.88 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say

MATERIAL
Concrete -3.14/4x(1.00)²x20 = 15.70 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY

LABOUR
Work supervisor
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.6 Vertical load testing of piles in accordance with IS 2911 (Part
IV) including installation of loading platform by
Kentledge/Anchor piles method and preparation of pile head
or construction of test cap and
dismantling of test cap after test etc. complete as per
specification & the direction of Engineer in-charge.
20.6.1 Single pile up to 50 tonne Safe capacity

20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity)
Details of cost for 1 test
7246 Vertical load testing (INITIAL) of piles in accordance with IS : per test 1.0000
2911 (Part-IV) including installation of loading platform and
preparation of pile head or construction of test cap and
specification and up to 50MT capacity pile.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity)
7249 Cyclic vertical load testing of piles in accordance with IS : 2911 per test 1.0000
(Part-IV) including preparation of pile head etc. for Single pile
up to 50 tonne capacity
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.6.2 Single pile above 50 tonne and up to 100 tonne Safe capacity
specification & above 50MT and up to 100MT.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
above 50 tonne capacity pile and up to 100 tonne capacity
pile
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.6.3 Group of two or more piles up to 50 tonne Safe capacity
specification & group of two or more up to 50MT.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
(Part-IV) including preparation of pile head etc. for Group of
two piles up to 50 tonne capacity each
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.7 Cyclic vertical load testing of pile in accordance with IS Code

of practice IS:2911 (part IV) by Kentledge method including
preparation of pile head etc for.
20.7.1 Single pile

20.7.1.1 Up to 50 tonne Safe capacity pile
up to 50 tonne capacity
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.7.1.2 Above 50 tonne and up to 100 tonne Safe capacity pile

above 50 tonne capacity pile and up to 100 tonne capacity
pile
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.7.2 Group of two or more piles
20.7.2.1 Up to 400 tonne Safe capacity of group

(Part-IV) including preparation of pile head etc. for Group of
two piles up to 50 tonne capacity each
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.8 Lateral load testing of single pile in accordance with IS Code of

practice IS : 2911 (Part IV) for determining safe allowable
lateral load on pile :
20.8.1 Up to 50 tonne capacity pile

7252 Lateral load testing of single pile in accordance with IS : 2911 per test 1.0000
part -IV for determining safe allowable lateral load on pile. Up
to 50 tonne capacity
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.8.2 Above 50 tonne and up to 100 tonne capacity pile

7253 Lateral load testing of single pile in accordance with IS : 2911 per test 1.0000
part -IV for determining safe allowable lateral load on pile.
Above 50 tonne capacity
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/
Sonic Echo Test method in accordance with IS 14893 including
surface preparation of pile top by removing soil, mud, dust &
chipping lean concrete lumps etc. and use of computerised
equipment and high skill trained personal for conducting
the test & submission of results, all complete as per direction

Detail of cost for one pit test (Ten pits in
one day)
MATERIAL
0081 Pile Integrity testing equipment day 0.1000
LABOUR
0160 Technician day 0.1000
0161 Helper (Technician) day 0.1000
Miscellaneous
9999 Reporting charges L.S. 100.6700
9977 Transportation and consumables etc. L.S. 33.5600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost per test
Say
21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard
tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides
with required EPDM rubber/ neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / panelling, C.P. brass /
stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing,
panelling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion

21.1.1.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic
coating of grade AC 15)

MATERIAL
(i) External member of the frame (Jindal section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
(v) C.P. brass /stainless steel screws 20 mm for cleat angle
18x4 = 72 Nos
(vi)
7389 Anodising 15 microns on aluminium sections kilogram 42.0200
(vii)
LABOUR
For fabrication of frame
9999 Labour for drilling holes, hire charges of drill, electricity L.S. 100.0000
charges, carriage of dash hold fasteners and sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron)
MATERIAL
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m
= 8.33 kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
18x4 = 72 Nos
(vi) Epoxy
7392 Powder coating 50 microns on aluminium sections kilogram 42.0200
(vii)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1.3 Polyester powder coated aluminium (minimum thickness of

polyester powder coating 50 micron)
MATERIAL
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
18x4 = 72 Nos
(vi)
7393 Polyester powder coating 50 microns on aluminium sections kilogram 42.0200
(vii)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision for
fixing of fittings wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings shall be paid for
separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic
coating of grade AC 15)

MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg

(vi) Aluminium snap beading (Jindal section no 4497) on both
side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Total = 21.65 kg
(viii)
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in 75 cm length
2x6
= 12
Total = 92 Nos
(x)
(xi)
(xii) Neoprene/ EPDM gasket in groove of meeting style
7390 Neoprene/EPDM rubber gasket metre 2.3500

LABOUR
For fabrication
For fixing the shutter including hinges :
9999 Labour for making provision for fittings and carriage of screws L.S. 50.0000
etc. including sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.1.2.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron)
MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg

(vi) Aluminium snap beading (Jindal section no 4497) on both
side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
(viii)
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre
in 75 cm length 2x6 = 12
Total = 92 Nos
(x) Epoxy
(xi)
(xii) Neoprene/ EPDM rubber gasket in groove of meeting
style
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.1.2.3 Polyester powder coated aluminium (minimum thickness of

polyester powder coating 50 micron)
MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg

(vi) Aluminium snap beading (Jindal
section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm
35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
(viii)
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in 75 cm length
2x6 = 12
Total = 92 Nos
(x)
(xi)
(xii) Neoprene/ EPDM rubber gasket in groove of meeting
style
LABOUR
For fabrication
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.2 Providing and fixing 12 mm thick prelaminated particle board

flat pressed three layer or graded wood particle board
conforming to IS: 12823 Grade l Type ll, in panelling fixed in
aluminium doors, windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per
architectural drawings and directions of engineer-in-charge.
21.2.1 Pre-laminated particle board with decorative lamination on

one side and balancing lamination on other side

MATERIAL
12 mm thick particle board = 7.00 sqm
Total = 7.35 sqm

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
21.2.2 Pre-laminated particle board with decorative lamination on

both sides
MATERIAL
12 mm thick particle board = 7.00 sqm
Total = 7.35 sqm
7480 Prelaminated particle board with both sides decorative sqm 7.3500
lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 12
mm thick

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /
neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness (weight not less
than 10kg/sqm)
MATERIAL
Float Glass panes 4.0 mm thick = 1.00 sqm
Add for wastage & breakage @ 10% = 0.10 sqm
Total =1.10 sqm
than 10kg/sqm).
LABOUR
9988 Sundries and carriage of gasket L.S. 6.8900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
21.3.2 With float glass panes of 5 mm thickness (weight not less than
12.50 kg/sqm)
MATERIAL
Glass panes 5.50 mm thick = 1.00 sqm
Total =1.00 sqm
than 12.50 kg/sqm)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
21.3.3 With float glass panes of 8 mm thickness (weight not less than
20 kg/sqm)
MATERIAL
Float Glass panes 8.0 mm thick = 1.00 sqm
Total =1.10 sqm
2408 Float glass sheet of nominal thickness 8 mm.(weight not less sqm 1.1000
than 20.00 kg/sqm).
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
21.4 Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS : 6315,
having brand logo embossed on the body / plate with double
spring mechanism and door weight up to 125 kg, for doors,
including cost of cutting floors, embedding in floors as
required and making good the same matching to the existing
floor finishing and cover plates with brass pivot and single
piece M.S. sheet outer box with slide plate etc. complete as
per the direction of Engineer-in- charge.
21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

Details of cost for one number
MATERIAL
7394 Double action hydraulic floor spring with stainless steel cover each 1.0000
plate
9977 CARRIAGE L.S. 13.0000
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
21.4.2 With brass cover plate minimum 1.25 mm thickness

Details of cost for one number
MATERIAL
7396 Double action hydraulic floor spring with brass cover plate each 1.0000
9977 CARRIAGE L.S. 13.0000

LABOUR
For cutting hole and making it good
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
21.5 Providing and fixing powder coated aluminium work
(minimum thickness of powder coating 50 micron) consisting
of tee/ angle sections, of approved make conforming to IS :
733 in frames of false ceiling including aluminium angle cleats
with necessary C.P. brass/ stainless steel sunk screws,
aluminium perimeter angles fixed to wall with stainless steel
rawl plugs @ 450 mm centre to centre and fixing the frame
work to G.I. level adjusting hangers 6 mm dia. with necessary
cadmium plated machine screws all complete as per approved
architectural drawings and direction of the Engineer-in-charge
(level adjusting hangers, ceiling cleats and expansion hold
fasteners to be paid for separately).

Details of cost for 6.35 kg (2.40x2.40 = 5.76 sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee of size 35x23.5x1.5
mm @ 600 mm centre to centre

3x2.40 m = 7.20 m
Extra for light fittings
2x1.20 m = 2.40 m
Total= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of size 35x23.5x1.5
3x4x0.60 m = 7.20 m
(-) 2x0.30 = (-) 0.60 m
Total=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size 25.4x25.4x1.63
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size
25.4x25.4x1.63 mm
Extra for light fittings =3x2x2 = 12.00
Corner = 4.00
For joining runners = 42.00
Total = 58.00x0.025 = 1.45 m @ 0.213 kg/m = 0.309 kg
Sub total = 2.370 + 1.630 + 2.045 + 0.309 =6.354 kg
Total = 6.672 kg
(iii) C.P. brass/ stainless steel screws 20 mm for angle cleats

(iv) Rawl plug for fixing perimeter angles
Epoxy
(vi)
(vii)
9999 C.P. brass screws for fixing frame with suspenders L.S. 13.0000
LABOUR
For fabrication and erection
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 6.35 kg
Cost for 1 kg
Say
21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (up
to 1200mm length), fixed to roof slabs by means of ceiling
cleats made out of G.I. flat 40x3mm size 60 mm long and
stainless steel expandable dash fastener of 12.5 mm dia and
50 mm long, complete as per direction of Engineer-in-charge.

Details of cost for 23 nos (hangers in 2.40 mx 2.40 m = 5.76
sqm)one number
MATERIAL
6 mm dia G.I. adjustable hangers including clips (up to 1.20
metre length).
For light fitting 2x4 = 8.00
For runners = 15.00
Total = 23.00
7395 6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m each 23.0000
length)
Ceiling cleats
G.I. flat 40X3 mm 60mm long
23x0.06 = 1.38 m @ 0.95kg/m = 1.31kg
Total = 1.38 kg say 0.014 q
bolt
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 23 hangers
Cost for one hanger
Say
21.7 Providing and fixing machine moulded aluminium covering of

approved pattern & design, made out of machine cut
aluminium sheet and machine holed for receiving dash
fastener, over expansion joints on vertical surfaces/ceiling
floors, the fixing on plate in one row on one side of joint only
shall be done with stainless steel dash fasteners of 8 mm dia
and 75 mm long bolt including providing aluminium washers 2
mm thick & 15 mm dia , at a staggered pitch of 200mm centre
to centre including drilling holes in the receiving surface and
providing expandable plastic sleeves in holes etc. complete as
21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent

or dyed to required shade according to IS: 1868, Minimum
anodic coating of grade AC 15)

MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/
sqm = 7.00 kg
Total = 7.35 kg
7347 Cadmium plated full threaded steel screws (30x4 mm dia.) 100 Nos 0.3000
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 0.3000


LABOUR
9999 Sundries including machine work L.S. 21.4500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum

thickness of powder coating 50 micron)
MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/sqm = 7.00 kg
Total = 7.35 kg
7347 Cadmium plated full threaded steel screws (30x4 mm dia.) 100 Nos 0.3000
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 0.3000


LABOUR
9999 Sundries including machine work L.S. 21.4500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
21.8 Filling the gap in between aluminium frame & adjacent RCC/
Brick/ Stone work by providing weather silicon sealant over
backer rod of approved quality as per architectural drawings
and direction of Engineer-in-charge complete.
21.8.1 Up to 5mm depth and 5 mm width

MATERIAL
8646 Silicon sealant cartridge 0.0870
(i/c 5% wastage)
8654 Masking tape metre 2.0000
9999 Sundries & profile L.S. 2.6000
9999 LABOUR L.S. 20.8000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 metre
Say
21.9 Extra for applying additional anodic coating AC 25 instead of

AC 15 to aluminium extruded sections.
21.9.1 For fixed portion
7389 Anodising 15 microns on aluminium sections kilogram -41.0900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 41.09 kg
Cost for 1 kg
Say
21.9.2 For shutters of doors, windows & ventilators
7389 Anodising 15 microns on aluminium sections kilogram -21.6500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 21.65kg
Cost for 1 kg
Say
21.10 Providing and fixing double glazed hermetically sealed glazing

in aluminium windows, ventilators and partition etc. with 6
mm thick clear float glass both side, having 12 mm air gap,
including providing EPDM gasket, perforated aluminium
spacers, desiccants, sealant (Both primary and secondary
sealant) etc. as per specifications, drawings and direction of
Engineer-in-charge complete.

MATERIAL
Hermetically sealed double glazed unit made with 6mm thick
clear float glass both side having 12 mm air gap = 1.00 sqm.

Total = 1.10 sqm
8648 Hermetically sealed double glazed unit made with 6 mm thick sqm 1.1000
clear float glass both side having 12 mm air gap

LABOUR
Glazier /
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1 sqm
Say
21.11 Providing and fixing stainless steel (SS 304 grade) adjustable
friction windows stays of approved quality with necessary
stainless steel screws etc. to the side hung windows as per
direction of Engineer-in- charge complete.
21.11.1 205 X 19 mm
MATERIAL
8649 Stainless steel (SS 304 grade) adjustable friction window stay each 10.0000
205 x 19 mm
8647 Stainless steel screws 30 mm x4 mm 100 nos 0.4000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos
Cost for each
Say
21.11.2 255 X 19 mm
MATERIAL
8650 Stainless steel (SS 304 grade) adjustable 255 x 19mm each 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos
Cost for each
Say
21.11.3 355 X 19 mm
MATERIAL
355 x 19 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos
Cost for each
Say
21.11.4 510 X 19 mm
MATERIAL
510 x 19 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos
Cost for each
Say
21.11.5 710 X 19 mm
MATERIAL
710 x 19 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 nos
Cost for each
Say
21.12 Providing and fixing aluminium tubular handle bar 32 mm

outer dia, 3.0 mm thick & 2100 mm long with SS screws etc
.complete as per direction of Engineer-in-Charge.
21.12.1 Anodized (AC 15 ) aluminium tubular handle bar

Details of cost for 10 nos handle bar.
MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057
cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage 0.78 kg
Total = 16.34 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
21.12.2 Powder coated minimum thickness 50 micron aluminium

tubular handle bar
MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x0.026) x 2.10 = 0.0057
cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg
Epoxy
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
21.12.3 Polyester powder coated minimum thickness 50 micron

aluminium tubular handle bar
MATERIAL
10x22/7 x 1/4 (0.032x0.032 -0.026 x 0.026) x 2.10 = 0.0057
cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
21.13 Providing and fixing Brass 100mm mortice latch and lock with
6 levers without pair of handles (best make of approved
quality) for aluminium doors including necessary cutting and
making good etc. complete.

Detail of cost for 1 nos.
MATERIAL
7001 Brass 100mm mortice latch and lock with 6 levers without pair each 1.0000
of handles
LABOUR
9999 Sundry and screws L.S. 3.6400
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 no
Say
21.14 Providing and fixing anodised aluminium (anodised
transparent or dyed to required shade according to IS: 1868.
Minimum anodic coating of grade AC 15) sub frame work for
windows and ventilators with extruded built up standard
tubular sections of approved make conforming to IS: 733 and
IS: 1285, fixed with dash fastener of required dia and size
(Dash fastener to be paid for separately).

Details of cost for 4.082kg
MATERIAL
Aluminium Section
(i) External member of the frame (Jindal section no TU/ 3644)
V = 2x2.00 = 4.00 m
H = 2x1.20 = 2.40 m
Total= 6.40 m @ 0.607 kg/m = 3.885kg
Angle cleat 38x38x4.8 mm 50 mm long
4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg
Total = 4.286kg
LABOUR
charges, carriage of dash hold fasteners & sundries
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 4.082 kg
Cost for 1 kg
Say
21.15 Providing and fixing aluminium casement windows fastener of
required length for aluminium windows with necessary
21.15.1 Anodized (AC 15) aluminium

MATERIAL
8660 Aluminium casement window fastener (Anodised AC 15) each 10.0000
8666 Stainless steel screws 25 mm x4 mm 100 Nos 0.4000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say

MATERIAL
8661 Aluminium casement window fastener (powder coated ) each 10.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
aluminium
MATERIAL
8662 Aluminium casement window fastener (polyester powder each 10.0000
coated)
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
21.16 Providing and fixing aluminium round shape handle of outer

dia 100 mm with SS screws etc. complete as per direction of
Engineer-in-charge
21.16.1 Anodized (AC 15 ) aluminium

MATERIAL
8663 Aluminium round shape handle (anodised AC 15) outer dia each 10.0000
100mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say

MATERIAL
8664 Aluminium round shape handle (powder coated) outer dia each 10.0000
100 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say

aluminium
MATERIAL
8665 Aluminium round shape handle (polyester powder coated) each 10.0000
outer dia 100 mm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
21.17 Providing and fixing anodised aluminium grill (anodised
transparent or dyed to required shade according to IS: 1868
with minimum anodic coating of grade AC 15) of approved
design/pattern, with approved standard section and fixed to
the existing window frame with C.P. brass/ stainless steel
screws @ 200 mm centre to centre, including cutting the grill
to proper opening size for fixing and operation of handles and
fixing approved anodised aluminium standard section around
the opening, all complete as per requirement and direction of
Engineer-in-charge. (Only weight of grill to be measured for
payment).

MATERIAL
Anodised aluminium grill = 10.00 kg
Add 20% wastage = 2 kg = 12 kg
8774 Aluminium Grill kg 12.0000
LABOUR
for fixing
9999 Sundries L.S. 25.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.00 kg
Cost for 1 kg
Say
21.18 Providing and fixing 12 mm thick frameless toughened glass

door shutter of approved brand and manufacture, including
providing and fixing top & bottom pivot & double acting
hydraulic floor spring type fixing arrangement and making
necessary holes etc. for fixing required door fittings, all
complete as per direction of Engineer-in-charge (Door handle,
lock and stopper etc.to be paid separately).

MATERIAL
Glass= 2.10 Sqm.
Add Wastage @ 10% = 0.21 sqm.
Total= 2.31 sqm.
8778 Toughened glass 12 mm thickness sqm 2.3100
9977 Carriage of glass panes and other materials L.S. 8.1900
9999 Methylated spirit L.S. 5.3300
Stainless steel pivot and double acting hydraulic floor spring
type fixing
21.4.1 Rate as per Item No.21.4.1 of Salaminian Work each 1.0000
LABOUR
9999 Sundresses rog cotton etc. L.S. 1.1300
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.10 sqm
Cost for 1 sqm
Say
21.19 Filling the gap in between aluminium/ stone/ wood frame and
adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by
providing weather/structural non sag elastomeric PU sealant
over backer rod of approved quality as per architectural
drawings and direction of Engineer-in-charge complete,
complying to ASTM C920, DIN 18540-F & ISO 11600
21.19.1 Up to 5 mm depth and 5 mm width

Details of cost for 10m length width 5mm & depth 5mm
MATERIAL
2604 Weather/structural non sag elastomeric PU sealant (600ml each 1.0000
Sausage) for joints in RCC/Brick/ Stone/ wood/ Ceramic/
Gypsum/Aluminium work complying to ASTM C920, DIN
18540- F & ISO 11600 incl all taxes

9999 Sundries, including charges of Sealant gun machine, dhoti etc L.S. 26.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost per metre
Say

Details of cost for 10m length, width 10mm & depth 10mm
MATERIAL


LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost per metre
Say

Details of cost for 10m length, width 20mm & depth 20mm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 metre
Cost per metre
Say
22.1 Providing and laying integral cement based treatment for

water proofing on horizontal surface at all depth below
ground level for under ground structures as directed by
Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified

rough stone slab over a 25 mm thick base of cement mortar
1:3 (1 cement : 3 coarse sand) mixed with water proofing
compound conforming to IS:2645 in the recommended
proportion over the levelling course (levelling course to be
paid separately). Joints sealed and grouted with cement slurry
mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3

coarse sand) mixed with water proofing compound in
recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm

nominal size spreading @ 8 cudm/sqm thoroughly embedded
in the 2nd layer.
22.1.1 Using rough kota stone.

MATERIAL
Ist layer
Cement mortar 1:3 for fixing of stone 10x0.025 = 0.25 cum
3.8 Rate as per Item Number 3.8 of SH: MORTARS cum 0.2500
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
1169 Kotastone slab 25mm thick (rough cheseled) sqm 11.0000
Cartage 11x0.025 @ 2330 kg/m3 = 0.64 t
slab
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
Total = 0.28 cum
for slurry Bed
2x10.00 @ 2kg/m3 = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum
Total = 71.88 kg or 0. 72 t
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal
Cement in slurry = 0.73 quintal
Total = 3.43 quintal @ 1 kg for 50 kg of cement i.e. 6.86 kg

@ 8 cudm/sqm 1x10.3x8x1/1000 = 0.08 cum
Labour for base mortar & kota stone laying i/c slurry job
LABOUR
Labour for top layer & spreading stone grit
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.00 sqm
Cost for 1 sqm
Say
22.2 Providing and laying integral cement based treatment for

water proofing on the vertical surface by fixing specified stone
slab 22 mm to 25 mm thick with cement slurry mixed with
water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20 mm (minimum)
between stone slabs and the receiving surfaces and filling the
gaps with neat cement slurry mixed with water proofing
compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick
with neat cement punning mixed with water proofing
compound in recommended proportion complete at all levels
and as directed by Engineer-in-charge :
22.2.1 Using rough Kota stone

MATERIAL
Ist layer
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
1169 Kotastone slab 25mm thick (rough cheseled) sqm 11.0000
Cartage 11x0.025 @ 2330 kg/m3 = 0.64t
slab
Cement slurry for jointing
6x3.70 = 22.20 m
7x2.78 = 19.46 m
=41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap
10x0.02 = 0.200 cum
= 0.213 cum @ 1440 kg/cum = 306.70 kg or 0.307 t
Cement plaster 1:3 with neat cement punning
Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm = 136.20 kg
Total = 446.20 kg @ 1 kg for 50 kg of cement i.e. 8.90 kg
LABOUR
Fixing of Kota stone and applying cement slurry.
9999 Sundries and scaffolding L.S. 18.2000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00sqm
Cost for 1 sqm
Say
22.3 Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and
the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3

coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction of
vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied

hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron
thick PVC sheet. (Overlaps at joints of PVC sheet should be
100 mm wide and pasted to each other with bitumen @ 1.7
kg/sqm).

MATERIAL
Cement slurry @ 4.4 kg/sqm = 44.00 kg or 0.044 t
MATERIAL
Cement plaster 1:3 (20 mm thick)
LABOUR
approved quality
= 10x1.70= 17 kg = 0.017 t
3002 Polyvinyl chloride sheet 400 micron thick sqm 10.0000
9977 CARRIAGE L.S. 13.0000
@ 1 kg per 50 kg of cement used Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg Total = 180.2 kg/50 = 3.60 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.4 Providing and Placing in position suitable PVC water stops

conforming to IS:12200 for construction/ expansion joints
between two RCC members and fixed to the reinforcement
with binding wire before pouring concrete etc. complete :
22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick)

MATERIAL
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 metre 100.0000
mm thick)
LABOUR
9999 Sundries & wire etc. L.S. 26.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
22.4.2 Dumb bell with central bulb (180 mm wide, 8 mm thick)

MATERIAL
7428 Water stops Dumb bell with central bulb metre 100.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
22.4.3 Kickers (320 mm wide, 5 mm thick)

MATERIAL
7429 Kickers metre 100.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
22.5 Providing and laying water proofing treatment in sunken

portion of WCs, bathroom etc., by applying cement slurry
mixed with water proofing cement compound consisting of
applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/ sqm. This
layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed

with water proofing cement compound @ 0.126 kg/sqm. This
layer will be allowed to air cure for 4 hours followed with
water curing for 48 hours.
The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry
with polymer mixed slurry.

Cement 10x(0.488+0.242) = 7.30 kg
Sealing fillets 10x0.5 kg / sqm = 5.00 kg
Total = 12.30 kg = 0.012 tonne
367 tonne 0.0120
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type) 10x(0.25+0.126) = 3.79 kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg

Wastage @ 5% on 4.79 kg = 0.24 kg
8501 Polymer modified cementation coating kilogram 5.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.6 Providing and laying water proofing treatment on roofs of

slabs by applying cement slurry mixed with water proofing
cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound
@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer
is still green. Overlaps of joints of fibre cloth should not be
less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of

cement @ 1.289 kg/sqm mixed with water proofing cement
compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm.
This will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The entire treatment will be taken up to
30 cm on parapet wall and tucked into groove in parapet all
around.
(d) fourth and final layer of brick tiling with cement mortar
(which will be paid for separately. For the purpose of
measurement the entire treated surface will be measured.

MATERIAL
Cement 10x(1.289+0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
Total = 19.54kg = 0.020 tonne
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type) 10x(0.253+0.67) = 9.23 kg
Wastage @ 5% = 0.46 kg
Total = 9.69 kg
8501 Polymer modified cementation coating kilogram 9.6900
Fibre Glass cloth = 10.00 sqm
Wastage @ 10 % = 1.00 sqm
Total = 11.00 sqm
8502 Fibre glass cloth sqm 11.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.7 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming
to IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls up to 300 mm height including
cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge over 20 mm thick layer of cement mortar of mix 1:5
(1 cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining
walls up to 300 mm height including rounding of junctions of
walls and slabs.
(c) After two days of proper curing applying a second coat of

cement slurry using 2.75 kg/ sqm of cement admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineer-in- charge.
(d) Finishing the surface with 20 mm thick jointless cement

mortar of mix 1:4 (1 cement :4 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge including laying glass fibre
cloth of approved quality in top layer of plaster and finally
finishing the surface with trowel with neat cement slurry and
making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final
test.All above operations to be done in order and as directed
and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.
i) Cement slurry
ii) Cement mortar 1:5 (1 cement: 5 coarse sand)
iii) Roof treatment with brick bat and cement mortar
MATERIAL
285 Brick Aggregate (Single size) : 63 mm cum 0.9400
Cement mortar 1:5
LABOUR
128 Mate day 0.0400
Extra labour for ramming
9999 Sundries L.S. 13.6500
iv) Cement slurry
v) 20 mm cement plaster 1:4 (1 cement : 4 coarse sand)
vi) Water proofing compound
vi) Water proofing compound
27.50+27.50+69.40+124.00 = 248.40 kg @
1 kg per bag of cement
Extra for making chequers for 10 sqm
7233 Fibre glass tissue reinforcement Type II Grade I sqm 10.5000
9999 Chequer plate L.S. 13.6500
Add labour for laying 20 mm bed mortar
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for one sqm
Say
22.8 Providing and laying four courses water proofing treatment
with bitumen felt over roofs consisting of first and third
courses of blown bitumen 85/25 or 90/15 conforming to IS :
702 applied hot @ 1.45 Kg per square metre of area for each
course, second course of roofing felt type 3 grade-I (hessian
based self finished bitumen felt) and fourth and final course
of stone grit 6 mm and down size or pea sized gravel spread at
6 cubic decimetre per square metre, including preparation of
surface but excluding grading complete with :
22.8.1 Bitumen felt (hessian base) type 3 grade I conforming to IS :

1322
Blown or / and residual bitumen applied hot = 2x1.45x30 = 87
kg
approved quality
Hession felt type 3 Grade I (hessian base self finished bitumen
felt) = 30sqm + Add for over lapping @ 10% = 3 sqm. Total =

33 Sqm
1177 Stone grit 6 mm and down size or pea sized gravel cum 0.1800
30x6=180 cudm
0.087tx2.7x.001x33=0.162t
= 2 quintals/t of bitumen i.e. 2x0.087 =0.174q
9999 Preparing roof surface, cutting groove and making good etc. L.S. 134.5500
LABOUR
9999 Sundries, brushes etc. L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
22.9 Providing and laying six courses water proofing treatment

with bitumen felt over roofs consisting of first, third and fifth
course of blown bitumen 85/25 or 90/15 conforming to IS :
702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of
area respectively, second and fourth courses of roofing felt
type 3 grade I conforming to IS : 1322 (Hessian based self
finished bitumen felt) , sixth and final course of stone grit 6
mm and down size or pea sized gravel spread at 6 cubic
decimetre per sqm including preparation of surface but
excluding grading, complete.

Blown or / and residual bitumen applied hot
(1.45+1.20+1.45)x30=123kg
approved quality
Bitumen felt Type 3 grade 1 (hessian base self finished
bitumen
felt) = 60 sqm.+ Add for over lapping @ 10% = 6 sqm.
Total =66 Sqm
0.123t+2.7x.001x66=0.273t
30x6=180cudm
= 2 quintals/t of bitumen i.e. 2x0.123=0.246q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say

courses of blown or / and residual bitumen applied hot at
1.45, 1.20 and 1.70 kg per square metre of area respectively,
second and fourth courses of roofing felt type 2 grade I (fibre
base self finished bitumen felt) six and final courses of stone
grit 6 mm and down size or pea sized gravel spread at 6 cubic
decimetre per sqm including preparation of surface, excluding
grading, compete.

Blown bitumen applied hot
(1.45+1.20+1.70)x30 = 130.5 kg.
approved quality
Bitumen felt type B grade I (fibre base self finished bitumen
felt)
= 60 sqm. + Add for over lapping @ 10% = 6 sqm.
Total =66 sqm
318 Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 sqm 66.0000

(0.131 t+2.22x.001x66 = 0.275t)
30x6=180cudm
CARRIAGE:
Fuel (Steam coal) = 2 quintals/t of bitumen i.e. 0.1305=0.261q

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say

courses of blown or / and residual bitumen applied hot at
1.45, 1.20 and 1.70 kg per square metre of area respectively,
second and fourth courses of roofing felt type 2 grade II (glass
fibre base self finished bitumen felt) and sixth and final course
of stone grit 6 mm and down size or pea sized gravel spread at
6 cubic decimetre per sqm including preparation of surface
but excluding grading, complete.

Blown or / and residual bitumen applied hot
(1.45+1.20+1.70)x30 =130.5 kg.
approved quality
Bitumen felt as per IS 7193 Grade II (fibre base self finished
bitumen felt) = 60 sqm. + Add for over lapping @ 10% = 6

sqm.
Total =66 Sqm
318 Bitumen felt fibre base (vegetable or animal):As per IS 7193 sqm 66.0000
Grade I
(0.131t+3.08x.001x66=334t.)
30x6=180cudm
Fuel (Steam coal) = 2 quintals/t of bitumen
i.e. 2x0.1305=0.261q
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
22.12 Supplying and applying bituminous solution primer on roof

and / or wall surface at 0.24 litre per sqm.
Details of cost for 10 sq. metres
MATERIAL
LABOUR
9999 Sundries brushes etc. L.S. 13.5200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.13 Deduct for omitting in water proofing treatment final course

of spreading stone grit 6 mm down size or pea sized gravel :
22.13.1 at 6 cudm per sqm

MATERIAL
6x10 = 60 cudm
9999 Labour for screening and spreading grit L.S. 21.5800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.13.2 at 8 cudm per sqm

MATERIAL
8x10 = 80 cudm
9999 Labour for screening and spreading grit L.S. 26.9100
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size)
LABOUR

9999 Sundries for laying in terrace L.S. 45.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum
Say

MATERIAL
Cement mortar 1:3
LABOUR
9999 Sundries L.S. 11.7000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum
Say
22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand)

MATERIAL
Cement mortar 1:4
LABOUR
9999 Sundries L.S. 10.7900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of one cum
Say
22.15 to 22.21
22.22 Providing and mixing integral crystalline admixture for water

proofing treatment to RCC structures like basement raft,
retaining walls, reservoir, sewage & water treatment plant,
tunnels / subway and bridge deck etc. at the time of
transporting of concrete into the drum of the ready-mix
truck , using integral crystalline admixture @0.80% (minimum)
to the weight of cement content per cubic meter of concrete)
or higher as recommended by the manufacturer's
specification in reinforced cement concrete at site of work.
The material shall meet the requirements as specified in ACI-

212-3R-2010 i.e. by reducing permeability of concrete by
more than 90%, compared with control concrete as per DIN
1048 and resistant to 16 bar hydrostatic pressure. The
crystalline admixture shall be capable of self-healing of cracks
up to a width of 0.50mm. The work shall be carried out all
complete as per specification and the direction of the
Engineer-in-charge. The product performance shall carry
guarantee for 10 years against any leakage.

Details of cost for 1 kg
MATERIAL :
352 Integral crystalline admixture kg 1.0000
LABOUR :
9999 For measuring, making and mixing etc.. L.S. 5.8000
9999 Carriage of material and tools cost etc.. L.S. 1.7500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 Kg
Say
22.22A Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers
having Sun Reflectivity Index (SRI) of 105 on top of concrete
roof in three coats @10.76 litre/ 10 sqm. One coat of self-
priming of elastomeric waterproofing liquid (dilution with
water in the ratio of 3:1) and two coats of undiluted
elastomeric waterproofing liquid (dry film thickness of
complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly
cleaning the surface to remove loose particles with wire
brushes, complete in all respect as per the direction of
Engineer-in-Charge.

MATERIAL
8511 Fibre reinforced elastomeric liquid water proofing membrane litre 11.3000
10.76 litre + 0.538 (Add wastage 5%) = 11.30 litre

LABOUR
9999 Wire brush brushes, rollers etc. L.S. 6.7600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.23 Providing and applying integral crystalline slurry of hydrophilic
in nature for waterproofing treatment to the RCC structures
like retaining walls of the basement, water tanks, roof slabs,
podiums, reservoir, sewage & water treatment plant,
tunnels / subway and bridge deck etc., prepared by mixing in
the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts
water) for vertical surfaces and 3 : 1 (3 parts integral
crystalline slurry : 1 part water) for horizontal surfaces and
applying the same from negative (internal)
side with the help of synthetic fibre brush. The material shall
meet the requirements as specified in ACI- 212-3R-2010 i.e by
reducing permeability of concrete by more than 90%
compared with control concrete as per DIN 1048 and resistant
to 16 bar hydrostatic pressure on negative side. The
crystalline slurry shall be capable of self-healing of cracks up
to a width of 0.50mm. The work shall be carried out all
complete as per specification and the direction of the
engineer-in-charge. The product performance shall carry
22.23.1 For vertical surface two coats @ 0.70 kg per sqm

MATERIAL :
351 Integral crystalline slurry kg 1.4000
(2 x .70kg / sq.mtr. = 1.40kg)
LABOUR
9999 For application of waterproofing material L.S. 11.5500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm
Say
22.23.2 For horizontal surface one coat @1.10 kg per sqm.

MATERIAL :
351 Integral crystalline slurry kilogram 1.1000
(1 x 1.10kg / sq.mtr. = 1.10kg)
LABOUR :
9999 For application of waterproofing material L.S. 5.7500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm
Say
22.23A Providing & Applying polymer modified, flexible cementatious

negative side waterproofing coating with elastic
waterproofing polymers on interior wall plaster surface in
three coats @14.35 kg /10 sqm. one coat of self priming of
cementatious waterproofing polymer(dilution with water in
the ratio of 1:1) and two coats of cementatious waterproofing
polymer (dilution with water in the ratio of 3:1 ) after
scrapping and properly cleaning the surface to remove pre-
existing paint film & loose particles till plaster is visible,
complete in all respect as per the direction of Engineer-in-
Charge.

MATERIAL
8512 Cementitious water proofing coating with elastic polymers kg 15.0700
14.35 kg + 0.72 (Add wastage 5%) = 15.07 litre

LABOUR
9999 Wire brush brushes, rollers etc. L.S. 7.1500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.24 Providing and applying integral crystalline (dry shake) of

hydrophilic in nature for waterproofing treatment to the RCC
structures like basement raft, foundation slab, sewage &
water treatment plant slab, warehouses floor, parking
structures and water tank base slab etc. sprinkled @0.60kg
per sqm or higher as recommended by the manufacturer's
specification over the lean concrete of above cited structures.
The material shall meet the requirements as specified in ACI-
212-3R-2010 i.e. by reducing permeability of concrete by
more than 85%, compared control concrete as per DIN 1048
and resistant to 16 bar hydrostatic pressure on negative side.
The crystalline dry-shake shall be capable of self-healing of
cracks up to a width of 0.50mm. The work shall be carried out
all complete as per specification and the direction of the
Engineer-in-charge. The product performance shall carry

MATERIAL :
354 Integral crystalline dry shake kilogram 0.6000
LABOUR
9999 For measuring and sprinkling of waterproofing material L.S. 11.5500

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 sqm
Say
22.24A Providing & Applying high quality acrylic modified resin based
texture of Dholpur/Red sand stone Pattern with anti algae and
UV resistance properties to be applied as intermediate finish
in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5
mm thickness after scrapping and properly cleaning the
surface to remove loose particles from the plaster surface,
followed by top coating with Premium Acrylic Smooth exterior
paint with Silicone additives of required shade by two or more
coats @ 1.43 litres/10 sqm, complete as the direction of
Engineer -in-Charge.

MATERIAL
8513 Acrylic modified resin based texture kg 45.1900
43.04 kg + 2.15 (Add wastage 5%) = 45.19 kg
Quantity taken for cost using once = 10 sqm
Top coat with premium acrylic exterior paint (two or more
coats)
13.112.1 Rate as per Item No.13.112.1 of SH:Finishing sqm 10.0000
LABOUR
9999 Sundries and scaffolding L.S. 40.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.25 Providing and applying crystalline mortar by mixing in the
ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for
the treatment of faulty construction joints, cracks, tie rod
holes and spalled & honeycombed surface of RCC
underground structures like basement, water tanks, bridge
deck etc. to ensure water tightness. The crystallize mortar
shall conform to the EN 1504-3 having compressive strength
Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5
MPa. The work shall be carried out all complete as per
specification and the direction of the Engineer-In-Charge. The
product performance shall carry guarantee for 10 years
against any leakage.
22.25.1 For sealing cracks and faulty construction joints, routed

out/making U-shape groove size 25x25mm and then primed
the area with integral crystalline slurry @0.05kg/running
metre and while the surface is tacky filled the groove up to
surface with crystalline mortar @1.50kg/running metre. Once
crystalline mortar is touch dry then finally applied two coats
of integral crystalline slurry @0.05kg/running metre per coat.

MATERIAL :
353 Crystalline Mortar @1.50 kg per meter kilogram 1.5000
351 Integral crystalline slurry for priming and finishing kilogram 0.1500
(3 x 0.05kg / meter) = 0.15kg
LABOUR
9999 For making crystalline mortar and repair work etc.. L.S. 14.4500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 meter
Say
22.25.2 For patching of tie rod holes, prepared tie rod hole surface
and then primed the area with integral crystalline slurry
@0.070kg/sqm and while the surface is tacky repair and then
filled the tie rod holes with crystalline mortar@0.040kg per
hole. The crystalline mortar should be tightly rodded into tie
rod holes or packed tightly (For 25x25x25 mm tie rod hole,
use 0.040kg to fill the hole)

Details of cost for 1 no. hole
MATERIAL :
353 Crystalline mortar@0.040 kg per hole kilogram 0.0400
LABOUR
9999 For making crystalline mortar and repair work etc.. L.S. 2.9000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for each hole
Say
22.26 Providing and applying of swellable type water stop tape,

19mm x 25mm thick in linear meter (expansive nature) for
construction joints treatment of RCC structure such as raft
slab, retaining walls, water storage tank and at the junctions
of raft slab with the retaining walls etc.. After cleaning the
surface, one coat of required primer for swellable water stop
tape shall be applied throughout the length of the joint @3.78
litre per 240 running meter. Over the primed surface
swellable type water stop tape shall be placed. The work shall
be carried out all complete as per specification and the
direction of the Engineer-In-Charge. The product performance
shall carry guarantee for 10 years against any leakage.

MATERIAL :
355 Swellable type water stop tape (Crystalline sealing compound) metre 1.0000
356 Swellable type water stop primer Litre 0.0160

(@3.78 litre per 240 running meter)
LABOUR
9999 For application of primer and swellable water stop L.S. 8.6500
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 metre
Say
23.1 Boring/drilling bore well of required dia for casing/ strainer

pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/ bore log, including hire & running
charges of all equipment, tools, plants & machineries required
for the job, all complete as per direction of Engineer-in-
charge, up to 90 metre depth below ground level.
23.1.1 All types of soil

23.1.1.1 300 mm dia
MACHINERY :
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2x30)/140
Loading, unloading &erection charges of drilling Rig
Machine
LABOUR
7763 Water supply tanker of 5000 litre capacity each 1.0000
Extra labour to assist M/C operator & security
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 35 metre
Cost of 1 metre
Say
23.1.1.2 350 mm dia

MACHINERY :
(assume 140m of bore for one shifting) (2 x30)/140
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 32 metre
Cost of 1 metre
Say
23.1.1.3 400 mm dia

MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 25 metre
Cost of 1 metre
Say
23.1.2 Rocky strata including Boulders
23.1.2.1 300 mm dia

MACHINERY :
1235 Diesel oil litre 6.0000
Extra diesel required for boring in rocky strata
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
23.1.2.2 350 mm dia

MACHINERY :
(assume 140m of bore for one shifting) (2 x30)/140 Loading,
unloading &erection charges of drilling Rig Machine
LABOUR
Extra labour to assist M/C operator &security
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
23.1.2.3 400 mm dia

MACHINERY :
(assume 140m of bore for one shifting) (2x30)/140
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
23.2 Boring/drilling bore well of required dia for casing/ strainer

pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/ bore log, including hire & running
charges of all equipment, tools, plants & machineries required
for the job, all complete as per direction of Engineer -in-
charge, beyond 90 metre & up to 150 metre depth below
ground level.
23.2.1 All types of soil

23.2.1.1 300 mm dia
MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
23.2.1.2 350 mm dia

MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 27 metre
Cost of 1 metre
Say
23.2.1.3 400 mm dia

MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 20 metre
Cost of 1 metre
Say
23.2.2 Rocky strata including Boulders
23.2.2.1 300 mm dia

MACHINERY :
Transportation charges for to and fro to site (assume
140m of bore for one shifting) (2 x30)/140Loading,
unloading &erection charges of drilling Rig Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
23.2.2.2 350 mm dia

MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
23.2.2.3 400 mm dia

MACHINERY :
Machine
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 14 metre
Cost of 1 metre
Say
23.3 Supplying, assembling, lowering and fixing in vertical position

in bore well, unplasticized PVC medium well casing (CM) pipe
of required dia, conforming to IS: 12818, including required
hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer - in-
charge.
23.3.1 100 mm nominal size dia

MATERIAL
7758 uPVC blind pipe 100 mm dia as per IS: 12818 metre 100.0000
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
9999 Sundries L.S. 10.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say

MATERIAL
LABOUR
for lowering
9999 Sundries (Adhesive etc.) L.S. 10.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say

MATERIAL
LABOUR
for lowering
9999 Sundries L.S. 10.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say

in bore well unplasticized PVC
medium well screen (RMS) pipes with ribs, conforming to IS:
12818, including hire & labour charges, fittings & accessories
etc. all complete, for all depths, as per direction of Engineer-
in- charge.

MATERIAL
7759 uPVC slotted pipe 100 mm dia as per IS: 12818 metre 100.0000
LABOUR
for lowering
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say

MATERIAL
LABOUR
for lowering
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say

MATERIAL
LABOUR
for lowering
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
23.5 Supplying, filling, spreading & levelling stone boulders of size

range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction of
Engineer-in-charge.

MATERIAL
7753 Boulder 50 mm to 200 mm cum 1.0000
including carriage
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
23.6 Supplying, filling, spreading & levelling gravels of size range 5

mm to 10 mm, in the recharge pit, over the existing layer of
boulders, in required thickness, for all leads & lifts, all
complete as per

MATERIAL
7754 Gravel 5 mm to 10 mm cum 1.0000
including carriage
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
23.7 Supplying, filling, spreading & levelling coarse sand of size

range 1.5 mm to 2 mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per
direction of
Engineer -in-charge.

MATERIAL
7755 Gravel 1.5 mm to 2 mm cum 1.0000
including carriage
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
23.8 Gravel packing in tube well construction in accordance with

IS: 4097, including providing gravel fine/ medium/ coarse, in
required grading & sizes as per actual requirement, all

MATERIAL
7772 Pea Gravel cum 1.0000
including carriage
LABOUR
Beldar day 0.3000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 Cum.
Say
23.9 Providing and fixing factory made precast RCC perforated
drain covers, having concrete of strength not less than M-25,
of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos
longitudinal & 9 nos cross sectional T.M.T. hoop bars,
including providing 50 mm dia perforations @ 100 to 125 mm
c/c, including providing edge binding with M.S. flats of size 50
mm x 1.6 mm complete, all as per direction of Engineer-in-
charge.

Details of cost for 1 No. RCC drain cover
MATERIAL
7762 Precast R.C.C. perforated slab 1.0000
LABOUR
9988 Carriage and fixing charges 15.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No.
Say

in bore well, ERW (Electric Resistance Welded) FE 410 mild
steel screwed and socketed/plain ended casing pipes of
required dia, conforming to IS: 4270, of reputed & approved
make, including painted with outside surface with two coats
of anticorrosive paint of approved brand and manufacture,
including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of
Engineer-
in-charge.
23.10.1 100 mm nominal size dia having minimum wall thickness 5.00
mm
MATERIAL
7757 M.S. pipe 100 mm dia casing pipe metre 30.0000
7764 M.S. socket 100 mm dia each 5.0000
2343 Carriage of ductile iron pipes 100 mm dia 100 metre 0.3000
including loading and unloading
Painting with anticorrosive Paint
3.14 x.0110x30.00=10.36 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
mm
MATERIAL
3.14 x0.160x30.00=15.07 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
mm
MATERIAL
3.14 x0.210x30.00=20.25 sqm.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say

in bore well, ERW (Electric Resistance Welded) FE 410 plain
slotted (having slot of size 1.6/3.2 mm) mild steel threaded
and socketed/ plain bevel ended pipe (type A) of required dia,
conforming to IS: 8110, of reputed and approved make,
having wall thickness not less than 5.40 mm, including painted
with outside surface with two coats of anticorrosive
bitumastic paint of approved brand and manufacture,
including hire & labour charges, fittings & accessories, all
complete, for all depths, as per direction of Engineer -in-
charge.

MATERIAL
7757 M.S. pipe 150 mm dia casing pipe 30.0000
7764 M.S. socket 150 mm dia 5.0000
9999 Extra for making slots 906.0400
2345 Carriage of cast iron pipes 200 mm dia 0.3000
3.14 x 0.210x30.00=20.25 sqm.
13.65.1 Rate as per Item No.13.65.1 of SH:Finishing 10.3600
LABOUR
114 Beldar 1.3500
130 Mistry 0.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say

MATERIAL
7765 M.S. socket 150 mm dia 5.0000
3.14 x 0.210x30.00=20.25 sqm.
LABOUR
114 Beldar 1.4000
130 Mistry 0.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say

MATERIAL
7766 M.S. socket 200 mm dia 5.0000
3.14 x 0.210x30.00=20.25 sqm.
LABOUR
114 Beldar 1.4000
130 Mistry 0.5000
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
23.12 Development of tube well in accordance with IS : 2800 (part I)

and IS: 11189, to establish maximum rate of usable water
yield without sand content (beyond permissible limit), with
required capacity air compressor, running the compressor for
required time till well is fully developed, measuring yield of
well by "V" notch method or any other approved method,
measuring static level & draw down etc. by step draw down
method, collecting water samples & getting tested in
approved laboratory, i/c disinfection of tube well, all
complete, including hire & labour charges of air compressor,
tools & accessories etc., all as per requirement and direction

Details of cost for 8 Hours
MACHINERY :
0040 Air compressor 250 cfm with two leads for pneumatic cutters/ day 1.0000
hammers.
MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 8 Hours
Cost of 1 Hour
Say
23.13 Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing
pipe, removable as per requirement, all complete for borewell
of:
23.13.1 100 mm dia

MATERIAL
100 mm dia MS screwed cap with locking arrangement
7747 M.S. cap 100 mm dia each 1.0000
Add 5% labour factor on X
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.13.2 150 mm dia

MATERIAL
7748 M.S. cap 150 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.13.3 200 mm dia

MATERIAL
7748 M.S. cap 200 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.14 Providing and fixing M.S. clamp of required dia to the top of
casing/ housing pipe of tube well as per IS: 2800 (part I),
including necessary bolts & nuts of required size complete.
23.14.1 100 mm clamp

MATERIAL
Clamps made of MS flat of size 100x10mm thick
1x2mt.x7.80 kg per mt.=15.60 kg.
10.1 Rate as per Item No.10.1 of SH:Steel Work 15.6000
9999 Sundries, nuts and bolts etc. 30.0000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.14.2 150 mm clamp

MATERIAL
1x2.10 mt.x7.80 kg per mt.=16.38 kg.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.14.3 200 mm clamp

MATERIAL
1x2.40 mt.x7.80 kg per mt.=18.72 kg.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
23.15 Providing and fixing Bail plug/ Bottom plug of required dia to
the bottom of pipe assembly of tube well as per IS:2800 (part
I).
23.15.1 100 mm dia

MATERIAL
7750 M.S bail plug 100 mm dia each 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say
23.15.1 150 mm dia

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say
23.15.3 200 mm dia

MATERIAL
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 No
Say
24.1 Raking out joints of stone masonry surface to the required

width and depth, with due care and precaution, by
mechanical / manual means, including preparing and cleaning
the surface for re-
pointing/ refilling of joints, including disposal of rubbish to the
dumping ground within 50 metre lead.

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.2 Providing and fixing double scaffolding system (cup lock type)
on the exterior side of building/structure, up to 25 metre
height, above ground level, including additional rows of
scaffolding in stepped manner as per requirement of site,
made with 40mm dia M.S. tube, placed 1.5 metre centre to
centre, horizontal & vertical tubes joint with cup & lock
system with M.S. Tubes, M.S. tube challis,
M.S. clamps and staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable
condition for execution of work of cleaning and/ or pointing
and/ or applying chemical and removing it thereafter. The
scaffolding system shall be stiffened with bracings, runners,
connecting with the building etc, wherever required, if
feasible, for inspection of work at required locations with
essential safety features for the workmen etc., complete as
per directions and approval of Engineer-in- charge.
Note:- (1) The elevational area of the scaffolding shall be

measured for payment purpose. (2) The payment will be
made once only for execution of all items for such works.

Details of cost for area = 22.5x9.0=202.50 sqm
MATERIAL
use of 40 times
7397 Base jack each 0.3000
Qty taken for cost of using once =
14x0.85/40=0.2975
Vertical standard 2.5m length=7x2x9x2.5=315.00 m
Side support 6.00m length=3x2x6.00=36.00m
Horizontal support 3 m length=18x3x3.00=162.00m
Total=1026.00m
@ 3.67 kg/m =3765.42 kg
Qty taken for cost of using once=
3765.42x0.85/40=80.02kg
7387 Spigot for standard jointing kilogram 2.6300
7x2x9=126 nos x 0.40m length = 50.40m
@2.46kg/m=123.98kg
123.98x0.85/40=2.63kg
2x7x2x9=252 nos
@ 0.15 kg each=37.80 kg =0.378q
0.378x0.85/40=0.008q
7346 Double coupler each 2.5500
Clamp coupler for fixing MS tube with scaffolding
2x3x2+2x18x3=120 nos
120x0.85/40=2.55 nos
7398 Challies each 1.9100
3 nos x 18 lines=54 nos
Two level plate challies=2x18 lines=36nos
Total=90 nos
90x0.85/40=1.9125 nos
7399 Cup lock each 27.9200
For Vertical standards=
(5x7x2x9=630 nos) +(2x18x19=694 nos)
Total=1314 nos
1314x0.85/40=27.92
40mm dia MS pipe=3765.42kg
25mm spigot=123.98kg
Nuts & bolts=37.80kg
clamp=120 nos@1.00kg each=120.00kg
Challies=90 nos @ 15.00kg each=1350.00kg
Cup locks=1314 nos @ 0.50kg each=657.00kg
Total=6054.20kg=6.054 tonne
LABOUR
0114 Beldar day 31.0000
9999 Sundries L.S. 1035.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 202.50 sqm
Cost of 1.00 sqm
Say
24.3 Cleaning the sand stone surface and removing dirt, dust, bird
dropping, grease, oil, algae, fungus, monkey beats, vegetable
growth etc., including providing, applying and washing the
surface with liquid Ammonia Chemical of 5% solution and
other chemical cleaning agent as approved by Archaeological
Survey of India/ Engineer-in-charge, of approved brand and
manufacturer, with the help of required scrubbers and also
cleaning with machine operated water jet mixed with desired
quantity of fine silica where ever required, without causing
any scratching/ damage to the stone surface and finally
washing the surface with clean water with the help of
pressure jet machine, complete in all respect, including taking
all precautions to safeguard ventilators, windows, doors etc.
by suitable covering so as to avoid any damage to the
building/structure, all as per direction of Engineer-in-charge
(The rate is inclusive of all materials & labours involved except
scaffolding).

MATERIAL
7767 Stone cleaning chemical approved by ASI litre 0.1000
1 kg teepal of 3% solution for 10 sqm area
for 10sqm = 0.10 liter
7771 Liquid Ammonia 5% litre 0.1700
LABOUR (for applying the chemical Solution)
0128 Mate day 0.1000
9999 Cleaning T & P & its maintenance cost L.S. 1.0000
(Jet Pump, electric cable, horse pipe, waler pipe, Nozzle safety
belt Rope & mantance cost and safety machine for window
etc.)

LABOUR (for pressure cleaning)
0128 Mate day 0.1000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.4 Providing and applying antifungal wash treatment using 3%

solution of sodium pentachloro phenate, of reputed brand
and manufacturer, on cleaned sand stone surface at desired
locations as per direction
of Engineer-in-charge (The rate is inclusive of all materials &
labours involved except scaffolding).

MATERIAL
7775 Sodium pentachloro phenate Kg 0.1000
LABOUR
0128 Mate day 0.1250
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.5 Ruled / Flush pointing on Red sand stone masonry surface
with lime, surkhi and marble dust mortar in the ratio of
1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow
surkhi ) : 1/2 marble dust}.
(The rate is inclusive of all materials & labours involved except
scaffolding).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.6 Ruled/ Flush pointing on White sand stone masonry surface

with lime, surkhi and marble dust mortar in the ratio of
1:1.5:1/2 {One lime : 1.5 surkhi (15% dark red and 85% light
yellow surkhi) : 1/2 marble
dust}. (The rate is inclusive of all materials & labours involved
except scaffolding).

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.7 Applying two or more coat of Ethyl Silicate chemical as

approved by Archaeological Survey of India/ Engineer-in-
charge, of approved brand and manufacturer, with brush or
spray on the existing stone masonry surface till there is no
further absorption of chemical by stone surface, including
protecting the applied surface from direct sunlight by suitable
means during application, all complete as per direction of the
Engineer-in-Charge (The rate is inclusive of all materials &
labours involved except
scaffolding).

MATERIAL
7769 Stone surface strengthening chemical approved by ASI litre 1.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.00 sqm
Cost of 1.00 sqm
Say
24.8 Applying breathable, non-reactive, antifungal, and water
repellent Silane/Siloxane chemical as approved by
Archaeological Survey of India/ Engineer-in-charge, of
approved brand and manufacture, diluted with solvent
mineral Turpentine oil in the ratio of 1:12 (One part of
approved chemical :12 Part of Turpentine oil), on the existing
sand stone masonry surface with two or more coats to give
uniform application of chemical on the surface, all complete
as per direction of Engineer-In-charge (The rate is
inclusive of all materials & labours involved except
scaffolding).

MATERIAL
7768 Water repellent chemical approved by ASI litre 1.0000
7770 Turpentine oil litre 12.0000
LABOUR
9999 Handling / Transportation charges L.S. 6.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 45.00 sqm
Cost of 1.00 sqm
Say
25.1 Providing and supplying aluminium extruded tubular and

other aluminium sections as per the architectural drawings
and approved shop drawings , the aluminium quality as per
grade 6063 T5 or T6 as per BS 1474,including super durable
powder coating of 60-80 microns conforming to AAMA 2604
of required colour and shade as approved by the Engineer-in-
Charge. ( The item includes cost of material such as cleats,
sleeves, screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra shall be paid on this
account). The weight of aluminium extruded section shall be
taken for
purpose of payment.

Total Area 6.72 sqm, No of Panels 1 no
Aluminium Weight per sqm = 6.50 Kg/m2
Vision Height 2.2 m
Add for cleats, sleeves, screws etc. @5% = 0.33 kg
Total = 7.17 kg
MATERIALS
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 6.5 kg
Cost for 1 kg
Say
25.2 Designing, fabricating, testing, protection, installing and fixing

in position semi (grid) unitized system of structural glazing
(with open joints) for linear as well as curvilinear portions of
the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop

drawings for the specified design loads conforming to IS 875
part III (the system must passed the proof test at 1.5 times
design wind pressure without any failure), including functional
design of the aluminium sections for fixing glazing panels of
various thicknesses, aluminium cleats, sleeves and splice
plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,
structural and weather silicone sealants, flashings, fire stop
(barrier)-cum-smoke seals, microwave cured EPDM gaskets
for water tightness, pressure equalisation & drainage and
protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip
galvanised / Aluminium alloy of 6005 T5 brackets of required
sizes, sections and profiles etc. to accommodate 3
Dimensional movement for achieving perfect verticality and
fixing structural glazing system rigidly to the RCC/
masonry/structural steel framework of building structure
using stainless steel anchor fasteners/ bolts, nylon separator
to prevent bimetallic contacts with nuts and washers etc. of
stainless steel grade 316, of the required capacity and in
required numbers.
(c) Providing and filling, two part pump filled, structural

silicone sealant and one part weather silicone sealant
compatible with the structural silicone sealant of required
bite size in a clean and controlled factory / work shop
environment, including double sided spacer tape, setting
blocks and backer rod, all of approved grade, brand and
manufacture, as per the approved sealant design, within and
all around
the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium

sheet 1 mm thick and of sizes, shapes and profiles, as required
as per the site conditions, to seal the gap between the
building structure and all its interfaces with curtain glazing to
make it watertight.
(e) Making provision for drainage of moisture/ water that

enters the curtain glazing system to make it watertight, by
incorporating principles of pressure equalization, providing
suitable gutter profiles at bottom (if required), making
necessary holes of required sizes and of required numbers
etc. complete. This item includes cost of all inputs of
designing, labour for fabricating and installation of aluminium
grid, installation of glazed units, T&P, scaffolding and other
incidental charges including wastages etc., enabling
temporary structures and services, cranes or cradles etc. as
described above and as specified. The item includes the cost
of getting all the structural and functional design including
shop drawings checked by a structural designer, dully
approved by Engineer-in-charge.
The item also includes the cost of all mock ups at site, cost of
all samples of the individual components for testing in an
approved laboratory, field tests on the assembled working
structural glazing as specified, cleaning and protection till the
handing over of the building for occupation. In the end, The
Contractor shall provide a water tight structural glazing having
all the performance characteristics etc. all complete as
required, as per the Architectural drawings, as per item
description, as specified, as per the approved shop drawings
and as directed by the Engineer- in-Charge.
Note:- 1. The cost of providing extruded aluminium frames,

shadow boxes, extruded aluminium section capping for fixing
in the grooves of the curtain glazing and vermin proof
stainless steel wire mesh shall be paid for separately under
relevant items under this sub- head. However, for the
purpose of payment, only the actual area of structural glazing
(including width of grooves) on the external face shall be
measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted

on structural glazing system if area of structural glazing
exceeds 2500 Sqm from the certified laboratories accredited
by NABL(National Accreditation Board for Testing and
Calibration Laboratories), Department of Science &
Technologies, India. Cost of testing is payable separately.
The NIT approving authority will decide the necessity of

testing on the basis of cost of the work, cost of the test and
importance of the work. Performance Testing of Structural
glazing system Tests to be conducted in the NABL accredited
lab or any other accreditation body which operates in
accordance with ISO/IEC 17011 and accredits labs as per
ISO/IEC 17025
1. Performance Laboratory Test for Air Leakage Test (-50pa to

- 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing
method for a range of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500pa) as per

ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA

501.01- 05 testing method for a range up to 2000 ml
4. Structural Performance Deflection and deformation by
static air pressure test (1.5 times design wind pressure
without any failure) as per ASTME-330-10 testing method for
a range up to 50 mm
5. Seismic Movement Test (up to 30 mm) as per AAMA 501.4-

09 testing method for Qualitative test, Tests to be conducted
on site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa

to 240 kpa (35psi) up to 2000 ml

Aluminium Weight per sqm = 6.50 Kg/sqm
Vision Height 2.2 m
Spandrel Height 2.0 m
MATERIALS
2605 Structural sealant - 6 mm x 12 mm metre 17.0200
2606 Spacer tape 6.4 mm thick x 6 mm wide metre 20.1100
2607 Weather Sealant - Non Staining (600 ml) each 1.9600
2608 Weather Sealant - Normal (300 ml) each 2.5500
2609 MS Brackets/Aluminium Alloy Brackets kg 9.7800
2610 Silicon Gasket in Kg (Above 50 g / m) kg 0.7800
2612 Anchor Fastener - M10 each 2.0000
2613 SS Bolt with washer of sizes for structural glazing / ACP
Cladding each 2.0000
2614 SS Screws of sizes for structural glazing /ACP Cladding each 52.0000
2632 Fire Stop metre 1.6000
2616 GI flashing - 1.2 mm Thick kg 3.9600
9999 Sundries L.S. 225.5000
9999 Sundries (Transportation) L.S. 451.0000
9999 Sundries (Scaffolding / Loading / Unloading) L.S. 573.0000
9999 Sundries (Designing charges etc.) L.S. 216.1800
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.3 Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass
(double glazed) vision panel units of size and shape as
required and specified, comprising of an outer heat
strengthened float glass 6mm thick, of approved colour and
shade with reflective soft coating on surface # 2 of approved
colour and shade, an inner Heat strengthened clear float glass
6mm thick, spacer tube 12mm wide, desiccants, including
primary seal and secondary seal (structural silicone sealant)
etc. all complete for the required performances, as per the
Architectural drawings, as per the approved shop drawings, as
specified and as directed by the Engineer-in-Charge.
The IGUs shall be assembled in the factory/ workshop of the
glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is

included in cost of item No.25.2)
For payment, only the actual area of glass on face # 1 of the
glass panels (excluding the areas of the grooves and weather
silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with
reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat
Strengthened clear Glass of approved make having properties
as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20
%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3
W/m2 degree K etc. The properties of performance glass shall
be decided by technical sanctioning authority as per the site
requirement.

Area of Glass deducting area of gap/grove 5% = 6.38 sqm
Vision Height 2.2 m

Wastage 10% = 0.638 sqm say 0.7 sqm
Net = 7.02 sqm
MATERIALS
2617 6 mm thick High performance glass sqm 7.0200
2618 6 mm thick clear heat strengthened glass sqm 7.0200
9999 Sundries (for insurance Charges) L.S. 126.2700
9999 Sundries ( Fabrication charges including silicon sealant, baker L.S. 2120.1300
rod, descant etc.
9999 Transportation including loading and unloading L.S. 126.2700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.4 Extra for openable side / top hung vision glass panels (IGUs)
including providing and supplying at site all accessories and
hardware for the openable panels as specified and of the
approved make such as heavy duty stainless steel friction
hinges, min 4 -point cremone locking sets with stainless steel
plates, handles, buffers etc. including necessary stainless steel
screws/ fasteners, nuts, bolts, washers etc. all complete as per
the Architectural drawings, as per the approved shop
drawings, as specified and as
directed by the Engineer- in-Charge.

Shutter Weight
Outer glass 6 mm
Area 1.76 sqm
Inner glass 6 mm
Aluminium Weight per sqm 7.78 Kg
Al weight = 1.76x7.78 = 13.7 Kg
No of Locking Point 4 no Total 67 Kg
Wedge Block 1 no
MATERIALS
2619 6 mm thick clear heat strengthened glass each 3.0000
2614 SS Screws of sizes for structural glazing / ACP Cladding each 49.0000
2620 ARMS GS HD -TOP HUNG -20"-TYPE P-COUPLE pair 1.0000
2621 Connection Block each 2.0000
2622 Curtain wall striker each 4.0000
2623 Adjustable Fastening Pawl each 4.0000
2624 Corner drive each 2.0000
2625 Top wedge Block each 1.0000
9999 Sundries L.S. 118.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.76 sqm
Cost for 1 sqm
Say
25.5 Providing, fabricating and supplying shadow box of required

size and shape, for fixing in the spandrel portion of the
structural glazing, in linear as well as curvilinear portions of
the building by providing semi -rigid, inorganic, non-
combustible fibre glass wool insulation 50 mm thick,
conforming to IS: 8183 and BS: 3958 Part 5. The insulation
layer shall have facing (factory bonded on surface # 1 of the
fibre glass insulation layer), of black non-woven fibre glass
tissue of nominal thickness 0.5 mm and nominal mass not less
than 60 gm /sqm, made of randomly oriented glass fibres
distributed in a binder by a wet- lay process including fixing
1.5 mm thick solid aluminium sheet backing using, 6 mm thick
cement board including SS rivets, nuts, bolts, washers etc
complete.

Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area including wastage @5 % = 3.39
MATERIALS
2626 Glass wool Density 48 Kg / m3 with Black Glass Tissue (BGT) sqm 3.3900
2634 GI/Aluminium Sheet (0.8 mm thick) kg 21.3000
2627 SS Screws - # 8 x 19 each 32.0000
2628 Weather Sealant - DC 789 cartridge 2.0000
2629 Cement Board sqm 3.3900
9999 Sundries with clips & adhesives L.S. 308.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.6 Providing and supplying Spandrel Glass Panels comprising of 6

mm thick heat strengthened monolithic float glass of
approved colour and shade with reflective soft coating on
surface # 2 of approved colour and shade so as to match the
colour and shade of the IGUs in the vision panels etc. ,all
complete for the required performances as specified, as per
the Architectural drawings, as per the approved shop
drawings, as specified, and as directed by the Engineer- in-
Charge.
For payment, only the actual area of glass on face # 1 of the

glass panels (but excluding the area of grooves and weather
silicone sealant) provided and fixed in position, shall be
measured in sqm. (Payment for fixing of Spandrel Glass Panels
in the curtain glazing is included in cost of relevant Item*).“(i)
Coloured tinted float glass 6mm thick substrate with reflective
soft coating on face # 2, having properties as visible Light
transmittance (VLT) of 25 to 35 %, Light reflection internal 10
to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. .
The properties of performance glass shall be decided by
technical sanctioning authority as per the site requirement.

Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area i/c wastage @ 5 % = 3.39 sqm
MATERIALS
2617 6 mm thick High performance glass sqm 3.3900
9999 Sundries (Insurance charges) L.S. 43.4600
9999 Sundries (Fabrication charges including silicon sealant, baker L.S. 682.5500
rod, descant etc.)
9999 Sundries (transportation including loading & unloading) L.S. 147.5900
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.8 Design supply & installation of suspended Spider Glazing

system designed to withstand the wind pressure as per IS 875
(Part-III). The Suspended System held with Spider Fittings of
SS-316 Grade Steel of approved manufacturer with glass
panel having 12 mm thick clear toughened glass held together
with SS- 316 Grade Stainless steel Spider & bolt assembly with
laminated glass fins 21 mm thick. The Glass fins and glass
panel assembly shall be connected to Slab/beams by means of
SS- 316 Grade stainless steel brackets & Anchor bolts and at
the bottom using SS channel of 50x25x2mm using fastener &
anchor bolts, non staining weather sealants of approved
make,
Teflon/ nylon bushes and separators to prevent bi-metallic

contacts, all complete to perform as per specification and
approved drawings. The complete system to be designed to
accommodate thermal expansion & seismic movements etc.
The joints between glass panels (6 to 8 mm) and gaps at the
perimeter & in U channel of the assembly to be filled with non
staining weather sealant, so as to make the entire system fully
water proof & dust proof.
The rate shall include all design, Engineering and shop
drawing including approval from structural designer, labour,
T&P, scaffolding, other incidental charges including wastage,
enabling temporary services all fitting fixers nut bolts, washer,
Buffer plates, fastener, anchors, SS channel laminated glass
etc. all complete. For the purpose of payment, actual
elevation area of Glazing including thickness of joints and the
portion of Glass panel inside the SS channel shall be
measured.

Details of cost for 35.28 Sqm
Description WD HT Nos Area (Sqm)
Facade Area 7.00 5.04 1.00 35.28
Fin Area 0.40 2.30 5.00 4.60
(A) Spider Fitting
8945 4 Point spider fittings of SS-316 grade with fin but without flat each 5.0000
head bolt(c/c routel distance 200mm)
8946 2 Point wall mounted spider fitting of SS- 316 grade without each 2.0000
flat head bolt and anchor fastener (c/c routel distance
200mm)
8947 1 Point wall mounted spider fitting of SS-316 grade without each 12.0000
flat head bolt and anchor fastener (c/c routel distance
200mm)
8948 Flate head bolt Nos 36.0000

8949 400 mm long fin plate without fasteners pair 5.0000
(B) Local Hardware
2612 Anchor Fastener - M10
For one point spider fitting =12x2=24 nos
For two point spider fitting =2x2=4 nos For
400mm fin plates =5x6=30 nosTotal=58 nos each 58.0000
8560 Non staining water resistant Clear silicon filling in gap metre 49.2800
Vr. joints between glasses = 7x5.04=35.28 m
Hr.joints between glass & wall =
2x7.00=14.00 mTotal=49.28 m
8559 Stainless steel U Channel of size (50x25x2mm) metre 7.0000
9999 Sundries(Baker Road, Screw &Accessories) L.S. 1000.0000
9999 Labour L.S. 10000.0000
(C) Glass Area
8778 Toughened glass 12 mm thickness sqm 37.0400
with hole =7.00x5.04=35.28 sqm + 1.76 sqm (Add 5%
Wastage)Total = 37.04 sqm
2415 21mm thick clear toughened Laminated glass for fins with sqm 4.8300
holes
= 5x2.30x.40=4.60sqm + 0.23sqm
(Add 5% Wastage)Total = 4.83 sqm
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 35.28 sqm
Cost of 1 sqm
Say
26.1 Providing & fixing in position Phenol bonded Bamboo wood

flooring with planks of sizes 14mm thick, minimum 1800mm
length and minimum 100 mm wide, in approved colour,
texture and finish, having Performance Appraisal Certificate
(PAC) issued by Building Materials & Technology Promotion
Council (BMTPC). The flooring shall be fixed with tongue and
groove interlocking system, with underlayment of 4mm thick
expanded polyethylene foam sheets having density
40kg/cum, over prepared surface with necessary quarter
round planks of size 1900mm x 18mm and door reducer of
size 1900mm x 44mm, wherever required. The bamboo wood
planks shall have minimum density of 1000 Kg/cum &
minimum Hardness 1000 Kgf. with Eco friendly UV coating, all
complete as per direction of the Engineer in-
charge.

Details of cost for 10m x 10m = 100 sqm
MATERIAL
8021 Bamboo wood Tile Flooring 14mm thick, minimum 1800 mm sqm 110.0000
length and 100 mm wide
100 + 10 (Add for wastage @10%) = 110 sqm
8022 Bamboo wood Quarter Round 18mm thick of size 1900mm x metre 39.9000
18mm
8023 Bamboo wood door reducer 14mm thick of size 1900mm x metre 2.0000
44mm
8015 Expanded polyethylene Foam sheet 4mm thick of Density sqm 105.0000
40kg/m3
100 + 5 (Add for wastage @5%) = 105 sqm
1246 Silicon based Joint Sealant for Tiles kg 5.0000
1247 Rubber base Adhesive kg 5.0000
LABOUR
9999 Sundries L.S. 100.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.2 Providing & fixing in position Phenol bonded Bamboo wood in

wall skirting with planks of sizes 14mm thick, 1900mm length
(minimum) and 85mm wide(minimum), in approved colour,
texture and finish, having Performance Appraisal Certificate
(PAC) issued by Building Materials & Technology Promotion
Council (BMTPC). The skirting shall be fixed with SS screws &
rawl plugs, over underlayment of 4mm thick, expanded
polyethylene foam sheets having 40kg/cum density over
prepared surface. The bamboo wood planks shall have
minimum density of 1000Kg/cum & minimum Hardness 1000
Kgf. with Eco friendly UV coating, all complete as per direction
of the Engineer in-charge.

Detail of cost for 10 sqm skirting
MATERIAL
8024 Bamboo wood Skirting 14mm thick of Size 1900mm x 85mm metre 120.5900
Area of 1 length skirting is 1.9 m x 0.085 m = 0.162 sqm

Quantity required for 10 sqm = 10 / 0.1615 = 61.92 pieces
Add 2.5% wastage= 1.548

Total = 61.92 + 1.548 = 63.468
Qty in running mtr = 63.468 x1.9m = 120.59 running meter
8015 High Density Expanded poly ethylene Foam sheet 4mm thick sqm 10.5000
of Density 40kg/m3
10 + 0.5 (Add for wastage @5%) = 10.5 sqm
(62x3=186 nos)
1246 Silicon based Joint Sealant for Tiles kg 1.0000
1247 Rubber base Adhesive kg 1.0000
LABOUR
9999 Sundries L.S. 20.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say

wall cladding at all height with planks of sizes 10mm thick,
minimum 1800mm length and minimum 100 mm wide, in
approved colour, texture and finish, having Performance
Appraisal Certificate (PAC) issued by Building Materials &
Technology Promotion Council (BMTPC), with necessary
profiled edges fixed with 40mm SS screws 5 nos in each tile to
frame work made of second class teak wood of size 20x15
mm in centre of each tile and bottom and top of work height,
40x15mm placed at ends of each tile. The cladding shall be
laid over backlayment of 1.00 mm thick expanded
polyethylene foam of density 40kg/cum in two layers, first
layer on wall surface before fixing wooden frame and second
layer on frame under cladding. The bamboo wood planks shall
have minimum density of 1000 Kg/cum & minimum Hardness
1000 Kgf. with
Eco friendly UV coating, all complete as per direction of the
Engineer in-charge.

Details of cost for 10m x 9.5m = 95 sqm
MATERIAL
8025 Bamboo wood Tile Wall Cladding 10mm thick, minimum 1800 sqm 104.5000
mm length and minimum 100 mm wide
10 x 9.5 = 95 + 9.5 (Add for wastage @10%) = 104.5 sqm
8026 Bamboo wood T-mould 14mm thick of size 1900mm x 44mm metre 41.6200
At end joints of planks = 4x9.91 = 39.64 mtr + 1.98 (Add for

wastage 5%) = 41.62 mtr
8027 Bamboo wood Threshold 14mm thick of size 1900mm x metre 40.9500
44mm
At periphery of cladding = 2x(10+9.5)+1.95 (Add for wastage
@5%) =40.95 metre
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm 199.5000
(2x10x9.5) = 190 + 9.5 (Add for wastage @5%)=199.5 sqm

@500mm c/c at teak wood frame
(5nos in each panels)
No of panels=95/(1.9 x 0.135)=370 nos
No. of screws= 370 x 5=1850 nos
10 metre height, at every 1.9 meter height one length of 10
metre i.e (5x9.91x0.02x
0.015+2x10x0.02x.015+2x9.50x.02x.015+4x9.91x0.04x0.015)+
wastage @5% =0.052866 cum cudm
LABOUR
9999 Sundries L.S. 100.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 95 sqm
Cost of 1 sqm
Say

panelled or panelled and glazed shutters for doors windows,
clerestory windows with pre-moulded minimum 30mm thick
planks, in approved colours, texture & finish. It shall have
10mm wide, 25mm deep grove to fit in panels. The bamboo
wood shall have minimum density of 1000 Kg/cum, minimum
Hardness 1000 Kgf. All styles and rails shall have profiled
interlocking system locked in place by bamboo pins, all
complete as per direction of Engineer in charge. (The
panelling will be paid for separately).

Details of cost for shutters of Bamboo wood 200 x 108cm =
2.16
sqm
MATERIAL
8028 Bamboo wood shutter of doors 10 cudm 4.8300
Styles 4x2.00x0.115x0.03 =0.0276 cum +
Top rails 1x1.08x0.11x0.03m = 0.0036 cum +
Bottom rails 1x1.08x0.212x0.03 = 0.0069 cum +
Lock rails 1x1.08x0.18x0.03 = 0.0058 cum
Total =0.0439 cum + 0.004 cum
(Wastage @5%)
Grand Total =0.0483 cum OR 48.30 cudm

LABOUR
9999 Sundries T&P etc. L.S. 5.6200
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm
Cost of 1 sqm
Say

panelling of 10mm thick, in 25 to 40 mm thick panelled or
panelled & glazed shutters for doors, windows, clerestory
windows, in approved colour, texture & finish. The bamboo
wood planks shall have minimum density of 1000 Kg/cum &
minimum Hardness 1000 Kgf. The panels shall have profiled
interlocking system locked in place with bamboo pins all
complete as per direction of the Engineer in-charge. (area of
opening for panel inserts
excluding portion inside grooves or rebates to be measured)

Details of cost for shutters of a door with 2/3rd panelling…
200 x 108 cm = 2.16 sqm

Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
8029 Bamboo wood panelling (10mm thick) 10 cudm 0.8000
4x47.2x38.65x1.0cm = 0.0073cum + 0.0007 sqm (Add
Wastage @10%)
Total = 0.008 cum OR 8 cudm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 0.66 sqm
Cost of 1 sqm
Say
26.6 Providing & fixing in position 65 mm thick factory made door

frame of Phenol bonded Bamboo wood (superior class,
interior use), in approved colour, texture and finish. The
bamboo wood shall have minimum density of 1000 Kg/cum,
minimum hardness 1000 Kgf. The door frame shall have tenon
& mortise interlocking system, to be fixed to the wall with 100
mm size G.I screws all a complete as per direction of Engineer-
in charge.

Detail of cost for 33 cudm
MATERIAL
8030 Superior class Bamboo wood door frame 65 mm thick 10 cudm 3.4000
2x206.75x9.5x6.5 cm = 0.0255 cum +
1x117.50x9.5x6.5 cm = 0.0072 cum
+ 0.001 cum (Add for wastage @ 5%)
Grand total = 0.034 cum = 34 Cudm
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 33 cudm
Cost of 1 cudm
Say
26.6A Providing, erecting, laying and fixing in position in 3.5 to 4 mm
thick bamboo mat corrugated sheet (BMCS) as per IS: 15476-
2004 in roofing with self drilling screws along with EPDM
washers complete or with galvanized iron J or L hooks 8mm
dia G.I. plain and bitumen washers etc, all complete as per

Details of cost for 181.30sqm area.
Consider a sheet of 18mx9m (external dimension of plinth).
Area of roof = 18.5x9.8m = 181.30 sqm.

MATERIAL:
Sheets used = 2x 19 nos (2.44m x 1.05m) & 4x19 nos (1.83mx
1.05m).
Total area = (2x19x2.44x1.05)+(4x19x1.83x1.05) = 243.39sqm,
Add wastage @ 3% = 7.30 sqm,

Total area = 250.69 sqm.
8144 Bamboo Mat corrugated sheets 3.5 to 4mm thick conforming sqm 250.6900
to IS 15476:2004
Weight of sheets,
For 2.44mx1.05m sheet size, 12kg/Nos x 38 nos = 456 kgs,
For 1.83m x 1.05m sheet size, 9kgs/Nos x 76 Nos = 684 kgs.
Total weight of sheet = 456+684 = 1140 kgs = 1.14 tonne

2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne 1.1400
1023 Galvanized steel J or L hooks 8mm dia 10 Nos 68.4000

9999 Sundries L.S. 56.7800
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 181.30 sqm
Cost of 1sqm
Say
26.6B Providing and fixing in position ridges of 3.5 to 4 mm thick

bamboo mat ridge cap (BMRC) as per IS: 15476-2004 in
roofing with self drilling screws along with EPDM washers
complete or with galvanized iron J or L hooks 8mm dia
G.I. plain and bitumen washers etc, all complete as per

Details of cost for length of ridge 18.50 metre (pair of 43cm
width each)
Consider a shed of 18mx9m (external dimensions of plinth).
Length of ridge 18.50 metre.

MATERIAL:
Ridges (Male & female) of size: 1.05m length required = 20
sets
20 sets x 1.05m = 21.00 metre,
Add wastage @ 5% = 1.05 metre,
Total length = 22.05 metre.
8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conforming to IS metre 22.0500
15476:2004
9977 Carriage (The ridges to be fixed with the same hooks as the L.S. 19.4300
sheets)
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 18.50 metre
Cost of 1 metre
Say
26.6C Providing and fixing at all height false ceiling of 4mm thick
phenol bonded Bamboo Mat board (595x595mm) conforming
to IS:13958-1994 including providing and fixing of frame work
made of GI angle 25x25x0.4 mm thick all around suitably fixed
to wall with the help of dash fastener and hanger frame
(600x600 c/c) made GI slotted Tee having powder coating on
bottom side (30x25x0.3 mm thick for main member &
25x25x0.3 mm for cross member) connected to ceiling with
2.64mm GI wire and anchor fastener at every junction and
also including cost of making openings for light fittings, grills,
diffusers, cut outs made with frame of perimeter channels
suitably fixed all complete as per direction of Engineer-in-
charge.

Ceiling area = 100sqm,
Add wastage @ 5% = 5sqm,
Total area = 105 sqm
MATERIAL:
8147 4mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 105.0000
Weight: (0.595x0.595m of Bamboo board).

Total number of board = 297.
Total weight of Bamboo board =
297 Nos x 1.31kgs/Nos = 389.07 kgs = 0.39 tonne.
2358 Carriage of 4mm thick Bamboo mat board and accessories. tonne 0.3900
8570 GI Main T ceiling section 30x25x0.3 mm (3 metre long) each 29.5000

including of wastage of 10%
8571 GI Perimeter wall angle 25x25x0.4 mm (3 metre long) each 13.5000
including of wastage of 10%
8572 GI Intermediate cross T section 25x25x0.3 mm (1.2 metre each 147.0000
long)
including of wastage of 10% on grid cut-outs.
8573 GI Intermediate cross T section 25x25x0.3 mm (0.6 metre each 147.0000
long)
including of wastage of 10% on grid cut-outs.

8615 Hanger rod 4mm thick each 72.0000
7015 Soffit cleat (size 27x37x25x1.60mm) each 72.0000
7388 Dash hold fasteners 12.5mm dia, 50mm long with 6mm dia each 72.0000
bolts
9977 Carriage of grid materials L.S. 89.2800
9999 Sundries L.S. 187.9500
LABOUR:
0114 Beldar day 23.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1sqm
Say
26.6D Providing and fixing at Bamboo Mat board conforming to

IS:13958-1994 for partition to frame by bucking or studding
with screws etc. complete (Frames, backing or studding to be
paid separately)
26.6D.1 3mm thickness

Details of cost for 3.5mx2m = 7.0 sqm
Partition area = 7.0sqm,
Add wastage @ 5% = 0.35sqm,
Total area = 7.35 sqm
MATERIAL:
Weight:
7.35sqm x 2.70 kgs/sqm =19.845 kgs = 0.02 tonne.

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm
Cost of 1sqm
Say

MATERIAL:
8147 4 mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 7.3500
Weight:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm
Cost of 1sqm
Say

MATERIAL:
Weight:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm
Cost of 1sqm
Say

MATERIAL:
Weight:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm
Cost of 1sqm
Say

MATERIAL:
Weight:

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 7 sqm
Cost of 1sqm
Say
26.6E Providing and fixing at all height wall panelling with phenol
bonded Bamboo Mat board conforming to IS:13958-1994
including providing and fixing to frame work made of 50mm x
50mm hardwood plugs including cutting brick work and fixing
in cement mortar and making good the wall etc. and also
providing and fixing wooden moulded corner beading of
triangular shape to the junction of panelling etc. with iron
screws all complete as per direction of Engineer-in-Charge.
26.6E.1 9mm thickness

Details of cost for panelling area of 5mx4m = 20.00 sqm with
moulding length of 18.00 metre
Wall panelling area = 20.00sqm,
MATERIAL:
Weight: 21sqm x 8.40 kgs/sqm =176.4 kgs = 0.18 tonne.

1316 50mmx50mm hardwood plug each 45.0000

2204 Carriage of timber cum 0.0248
9999 Sundries L.S. 26.9100

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20 sqm
Cost of 1sqm
Say
26.6E.2 12mm thickness

Details of cost for panelling area of 5mx4m = 20.00 sqm with
moulding length of 18.00 metre
Wall panelling area = 20.00sqm,
MATERIAL:
Weight: 21sqm x 10 kgs/sqm =210 kgs = 0.21 tonne.

1316 50mmx50mm hardwood plug each 45.0000

2204 Carriage of timber cum 0.0248
9999 Sundries L.S. 26.9100

LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20 sqm
Cost of 1sqm
Say
26.7 Providing and fixing 50 mm thick extruded polystyrene rigid
insulation board of required size between cavity wall,
complying with ISO 4898:2008 & ASTM C 578-08b - type VI,
having thermal conductivity of 0.0289 W/m K as per ASTM C
578 (measured as per IS 3346), compressive strength of > 350
kPa listed as per ASTM D 1621, density of 34-36 kg/m³ as per
ASTM D 1622, water absorptions ≤ 1% by volume as per ASTM
D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D
2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire
retardant property as per DIN 4102, Part 1 of class B2 and as
per ASTM E84 class A, fixed with suitable water based
adhesive and fastener, complete in all respect as per the

MATERIAL
8561 Extruded polystyrene rigid insulation board 50 mm thick sqm 10.2000
LABOUR
128 Mate day 0.2500
9999 Sundries (Water based adhesive, fasteners, scaffolding etc.) L.S. 100.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.8 Providing and fixing 50 mm thick extruded polystyrene rigid
insulation board of required size underdeck on ceiling surface,
complying with ISO 4898:2008 & ASTM C 578-08b - type VI,
having thermal conductivity of 0.0289 W/m K as per ASTM C
578 (measured as per IS 3346), compressive strength of > 350
kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per
ASTM D 1622, water absorptions ≤ 1% by volume as per ASTM
D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D
2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire
retardant property as per DIN 4102, Part 1 of class B2 and as
per ASTM E84 class A, fixed with suitable water based
adhesive and fastener, complete in all respect as per
the direction of Engineer-in-Charge.

MATERIAL
8561 Extruded polystyrene rigid insulation board 50 mm thick sqm 10.2000
LABOUR
128 Mate day 0.5000
9999 Sundries (Water based adhesive, fasteners, scaffolding etc.) L.S. 100.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.9 Providing and fixing factory made solid Foam uPVC profile for
kitchen cabinet frame (45 x 20 mm) of approved shade,
quality and make. The profile shall be laminated on both
sides, made from rigid foam sheets (Single extruded) having
density 600 Kg/cum and the exposed edges sealed with PVC
edge beading of same shade and colour. The frame shall be
fire retardant with necessary screw holding capacity. Frame
shall be fixed to wall using Expendable Fastener with
necessary stainless steel screws, all

Details of cost for kitchen cabinet
(2.00 x 0.45)+(2.00+0.615)= 2.13 mtr
MATERIAL
2491 Pre laminated both side solid foam uPVC profile (45x20mm) metre 2.1300
2493 PVC edge beading metre 4.2600

2494 Expandable fastener with plastic sleeve each 8.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.13 metre
Cost for 1 metre
Say
26.1 Providing and fixing factory made Kitchen Cabinet

Shutter/Partition 20 mm nominal thickness of approved
shade, quality and make, made from rigid foam sheets (Single
extruded) having density 600 Kg/cum and laminated on both
side by laminate Sheet/PVC foil lamination. The exposed
edges shall be sealed with PVC edge beading of same shade
and colour. The shutter shall be fire retardant having
necessary screw holding capacity. Shutter shall be fixed to
frame using approved hinges with necessary stainless steel
screws, all complete as per direction of Engineer-in-charge.

Details of cost for of one shutter 0.46 x0.61m =0.281 sqm
MATERIAL
2492 Solid foam uPVC sheet 20mm thick prelaminated on both side sqm 0.2810
2493 PVC edge beading metre 2.1300

9999 Sundries L.S. 20.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 0.281 sqm
Cost for 1 sqm
Say
26.11 Providing and fixing concealed hinge of approved quality for

19-20mm thick door with stainless steel
screws complete :

Details of cost for 10 nos
MATERIAL
8226 Concealed zinc coated hinges 19-20 mm thick with mounting 10 Nos 1.0000
plate
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 nos
Cost of 1 no
Say
26.12 Supplying & laying of bi-axial extruded high modulus
polypropylene geogrid conforming to MORTH SPECIFICATION
for base/sub-base reinforcement having minimum tensile
strength 15kN/m in the longitudinal and transverse direction,
with 5kN/m and 7kN/m tensile strength at 2% and 5% strain
respectively in the longitudinal and transverse direction,
junction efficiency not less than 95% and with
38mm X 38mm mesh opening.

Details of Cost for 300 Sqm
MATERIAL
8956 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 Sqm 300.0000
kN/m in the longitudinal and transverse direction
Add 10 per cent of the cost of reinforcing elements (synthetic

geogrids) for wastage and accessories like tie-strips, nuts and
bolts and loops/lugs for joining reinforcing elements with the
facia pannels, overlaps and other protective elements for
synthetic geogrids and all other activities required to
complete the item in all respect including taxes and
transportation. 10% of "P"
LABOUR
128 Mate day 0.3600
139 Skilled Beldar day 3.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
with 7kN/m and 14kN/m tensile strength at 2% and 5% strain
respectively in the longitudinal and transverse direction,

MATERIAL
8957 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength sqm 300.0000
20kN/m in the longitudinal and transverse direction

LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
with 10.5kN/m and 21kN/m tensile strength at 2% and 5%
strain respectively in the longitudinal and transverse direction,

MATERIAL
8958 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength sqm 300.0000

LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
polypropylene geogrid conforming to MORTH
SPECIFICATION for base/sub-base reinforcement having
minimum tensile strength 40kN/m in the longitudinal and
transverse direction, with 14kN/m and 28kN/m tensile
strength at 2% and 5% strain respectively in the longitudinal
and transverse direction, junction efficiency not less than 95%
and with 38mm X 38mm mesh opening.

MATERIAL
8959 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength Sqm 300.0000

LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
26.16 Supplying & laying of drainage composite for use behind
walls, between two different fills, alongside drains of road,
below concrete lining of canals etc. Geocomposite for planar
drainage, realized by thermobonding a draining core in
extruded monofilaments with two filtering nonwoven
geotextiles that may also be working as separation or
protecting layers. The draining three dimensional core will
have a “W” configuration as longitudinal parallel channels.
Minimum thickness to be 7.2mm, with two filtering UV
stabilized polypropylene nonwoven geotextile of minimum

thickness of 0.75mm characteristic opening size (O90) of 110
micron and tensile strength of 8.0 kN/m that will be working
as separation or protecting layer, geocomposite having in
plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0
& 20 kPa pressure and tensile strength of 18 kN/m , with mass
per unit area of 740 gsm, supplied in the form of roll for easy
transportation to site of work as per detailed specification all
complete as per directions of Engineer in charge.

MATERIAL
8960 Geosynthetic Drainage Composite sqm 300.0000
Add 10 per cent of the cost of synthetic Composites for
wastage and accessories for joining sheets with the facia
pannels, overlaps and other protective elements for synthetic
Composites and other miscellaneous activities required to
complete the item in all respect including transportation &
takes. 10% of "P"
LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
26.17 Supplying & laying of drainage composite for use behind
walls, between two different fills, alongside drains of road,
below concrete lining of canals etc. having thermobonding a
draining core - HDPE geonet comprises of two sets of parallel
overlayed ribs integrally connected to have a rhomboidal
shape with a polyethylene film and a nonwoven geotextile
having mass per unit area 130 gsm and tensile strength of
8.0 kN/m that will be working as separation or protecting

layer, geocomposite having in plane flow capacity of 0.7 L /
(m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and
tensile strength of 13.5 kN/m , with mass per unit area of 830
gsm, at easily accessible location including top and bottom,
with all leads and lifts, manpower and machinery, materials,
labour etc. complete and as directed by Engineer - In - Charge.

MATERIAL
8961 Geosynthetic Drainage Composite sqm 300.0000
Add 10 per cent of the cost of synthetic Composites for
wastage and accessories for joining sheets with the facia
pannels, overlaps and other protective elements for synthetic
Composites and other miscellaneous activities required to
complete the item in all respect including transportation &
takes. 10% of "P"
LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
26.18 Supplying and laying high strength flexible geogrids (HSFG) as
soil reinforcement / basal reinforcement as per MORTH 3100
and IRC 113, made of high tenacity polyester core with
polyethylene coating with Minimum Long Term Design
Strength (LTDS) of more than 50% of ultimate tensile strength
at 30 degree Celsius corresponding to 12 % strain .
26.18.1 Ultimate tensile strength- 100 kN/m

MATERIAL
8962 Synthetic Geogrid having ultimate tensile strength 100 kN/m Sqm 300.0000

LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say

MATERIAL
8963 Synthetic Geogrid having ultimate tensile strength 150 kN/m sqm 300.0000
LABOUR
128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 300 Sqm
Cost per Sqm
say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say

LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say


LABOUR
0128 Mate day 0.3600
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1sqm
Say
26.19 Providing at all heights, levels and locations Aluminium profile

industrial troughed sheet of Alloy 31500/31000/40800,
conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed
using self drilling/self tapping SS screws of size 5.5x65 mm
with EPDM seal complete up to required pitch in horizontal,
vertical or curved surfaces i/c cutting to size and shape where
required as per specifications, detail drawings and direction of
Engineer-in-Charge. The rate shall be inclusive of all screws,
seal, ridge, labour, scaffolding, machinery for fixing and
approved sealant where required etc. but excluding the cost
of purlins, rafters and trusses.
26.19.1 0.71 mm thick, the profile detail width 1044/920 mm, cover
width 1000/875 mm.
plinth).
MATERIAL:
Sheets used = 20 Nos
20 Nosx10.70mx1.044m = 223.42 sqm,
Total = 230.12sqm
8977 Aluminium profile sheet 0.71 mm sqm 230.1200
9999 Sundries L.S. 39.5200
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
26.19.2 0.91 mm thick, the profile detail width 1044/920 mm, cover
width 1000/875 mm.
plinth).
MATERIAL:
Sheets used = 20 Nos
20 Nosx10.70mx1.044m = 223.42 sqm,
Total = 230.12sqm
8978 Aluminium profile sheet 0.91 mm sqm 230.1200
9999 Sundries L.S. 39.5200
LABOUR:
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
26.22 Providing and fixing false ceiling at all heights with integral
densified calcium silicate reinforced with fibre and natural
filler false ceiling tiles of Size 595x595mm of approved
texture, design and patterns as per CPWD Specification 2019,
to be laid in true horizontal level suspended on inter-locking
metal T-Grid of hot dipped galvanised iron section of
0.33mmthick (galvanized @ 120 grams per sqm including both
sides)comprising of main-T runners of size 24x38 mm of
length 3000 mm, cross - T of size 24x32 mm of length 1200
mm and secondary intermediate cross-T of size 24x32 mm of
length 600mm to form grid module of size 600 x 600 mm,
suspended from ceiling using galvanised mild steel items
(galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash
fasteners, 6 mm dia fully threaded hanger rod
up to 1000 mm length and L-shape level adjuster of size

76x25x25x1.6 mm fixed with grid and Z cleat of size
25x37x25x1.6mm thick with pre-cut hole on both 25mm
flange to pierce into 12x50mm or even bigger size dash
fastener if require, fixed with Galvanised iron perimeter wall
angle or size 24x24x0.40 mm of length 3000 mm to be fixed
on periphery wall / partition with the help of plastic rawl plugs
at 450mm centre to centre and 40 mm long dry wall S.S
screws. The work shall be carried out as per specifications,
drawing and as per directions of the Engineer-in-Charge.
26.22.1 With 15 mm thick Tegular edged light weight calcium

silicates false ceiling tiles
MATERIAL
8589 Calcium Silicate tegular edged False ceiling tiles 595x595 mm
and 15 mm thick sqm 105.0000

Ceiling Area = 100 sqm + Add 5% wastage = 5 sqm. Total = 105
sqm
8590 Galvanised iron main Tee ceiling section Size 24x38x0.33 mm each 29.5000
(3 metre long)
including wastage @ 10%
8591 Galvanised iron perimeter wall Angle Size 24x24x0.40 mm each 13.5000
(3.00 metre long)
8592 Galvanised iron intermediate cross T section Size 24x32x0.33 each 147.0000
mm (1.2 metre long)
8593 Galvanised iron intermediate cross T section Size 24 x 32x 0.33 each 147.0000
mm (0.6 metre long)
8588 Galvanised MS hanger rod 6 mm dia MS fully threaded up to each 72.0000
1000 mm length
5775 Galvanised MS L-shape level adjuster of size 76x25x25x1.6 each 72.0000
mm
5776 12x50 mm long dash fastener each 72.0000
5777 Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with pre- each 72.0000
cut hole on both 25 mm flange
8211 40 mm long S.S screws with plastic rawl plugs 100 nos. 1.0000
9999 Sundries L.S. 310.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 cum.
Say
26.22.2 With 15 mm thick tegular/butt edged without perforation

plain/designer light weight calcium silicate Anti- Microbial Bio-
Safe coated false ceiling tiles Confirming to JIS-Z2801 and
ASTM G-21
MATERIAL
5778 15 mm thick tegular/butt edged without perforation sqm 105.0000
plain/designer light weight calcium silicate Anti-Microbial Bio-
Safe coated false ceiling tiles of size 595x595mm
Ceiling Area = 100 sqm +

Total = 105 sqm
8590 Galvanised iron main Tee ceiling section Size 24x38x0.33 mm each 29.5000
(3 metre long)
8591 Galvanised iron perimeter wall Angle Size 24x24x0.40 mm each 13.5000
(3.00 metre long)
8592 Galvanised iron intermediate cross T section Size 24x32x0.33 each 147.0000
mm (1.2 metre long)
8593 Galvanised iron intermediate cross T section Size 24 x 32x 0.33 each 147.0000
mm (0.6 metre long)
1000 mm length
5775 Galvanised MS L-shape level adjuster of size 76x25x25x1.6
mm
5776 12x50 mm long dash fastener each 72.0000
5777 Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with
pre-cut hole on both 25 mm flange each 72.0000
8211 40 mm long S.S screws with plastic rawl plugs 100 nos. 1.0000
9999 Sundries L.S. 310.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 cum.
Say
26.23 Providing and fixing false ceiling at all heights with integral
densified calcium silicate reinforced with fibre and natural
filler false ceiling tiles of Size 595x595 mm of approved
texture, design and patterns having NRC (Noise Reduction
coefficient) of 0.50 (minimum) as per IS 8225:1987, Light
reflectance of 85% (minimum). Non combustible as per
BS:476 (part-4), fire performance as per BS:476 (part 6 &7),
humidity resistance of 100%, thermal conductivity < 0.043
W/m K as per ASTM 518:1991, in true horizontal level
suspended on inter-locking metal powder coated T-Grid of
hot dipped galvanised iron section of 0.40 mm thick on
Silhouette profile, rotary stitched double webbed white with
6mm reveal profile
(white/black),comprising of main-T runners of size 15x42mm

of length 3000 mm, cross - T of size 15x42 mm of length 1200
mm and secondary intermediate cross-T of size 15x42 mm of
length 600mm to form grid module of size 600 x 600 mm,
suspended from ceiling using galvanised mild steel items
(galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm
outer diameter M-6 dash fasteners, 6 mm dia fully threaded
hanger rod up to 1000 mm length and L-shape level adjuster
of size 85x25x2 mm. Galvanised iron perimeter wall angle of
size 22x19x0.40 mm of length 3000 mm to be fixed on
periphery wall / partition with the help of plastic rawl plugs at
450 mm centre to centre and 40mm long dry wall S.S screws.
The work shall be carried out as per specifications, drawing
and as per directions of the Engineer-in-Charge.
26.23.1 With 15 mm thick integral densified micro edge light weight

calcium silicate false ceiling tiles
MATERIAL
8563 15 mm thick, light weight, integral densified micro look edged, sqm 105.0000
false ceiling tiles of size 595x595 mm.
Celling Area = 100 sqm +
Total = 105 sqm
SILHOUETTE Profile grid frame :
8567 Galvanized mild steel perimeter wall angle 22x19x0.40 mm each 13.5000
(3000 mm long)
including wastage @10%
8566 Powder coated steel section main-T ceiling sections each 29.5000
15x42x0.40 mm (3000 mm long)
8568 Powder coated Galvanised Iron intermediate cross-T section each 147.0000
15x42x0.40 mm (1200 mm long)
8569 Powder coated Galvanized Iron intermediate cross-T section each 147.0000
15x42x0.40mm (600 mm long )
1000 mm length
8619 Galvanised MS L-shape level adjuster of size 85x25x2 mm each 72.0000
8515 Galvanised MS 8 mm outer diameter M-6 dash fastener each 72.0000

50mm long
8211 40 mm long S.S screws with plastic rawl plugs 100 nos 1.0000
9999 Sundries L.S. 310.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
26.24 Providing and fixing in position wall panelling at all heights

with integral densified calcium silicate panels/tiles of size 595
x 595mm, having NRC (Noise Reduction coefficient) of 0.50
(minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire
performance as per BS:476 (part 6 &7), humidity resistance of
100%, thermal conductivity <0.043 W/m K as per ASTM
518:1991, comprising of a frame made from especially
fabricated galvanised mild steel sheet 0.50 mm thick pressed
section (galvanizing @120 grams per sqm including both
sides) i.e. Vertical studs of size 48 x 34 x 36 mm are placed at
600mm centre to centre in a floor and ceiling channel
section of size 50 x 32m fixed to the floor and
soffit at 600mm centres using 12mm dia,50mm long wedge
type expanded zinc alloy dash fastener with 10mm bolt. This
same channel is then to be fixed in horizontal direction at
600mm centre to centre so as to form a grid of 600mm x
600mm. Glass wool of 50mm thickness is then to be inserted
in the slots and finally calcium silicate non combustible
panels/tiles are to be screw fixed with self tapping pan head
nickel coated mild steel screws of size 13 x 3.2mm on to this
grid leaving an even groove of 1 mm between the panels. The
joints between the panels are to be duly jointed and finished
using recommended jointing calcium silicate based compound
and fibre joint tape roll 50mm wide (90 metre )roll and two
coats of primer suitable for panelling as per manufacturer's
specification as per direction of Engineer-in-Charge all
complete.
26.24.1 With 15 mm thick fully perforated square/butt edge light

weight calcium silicate panels/ tiles
Details of cost for 6.00 x 3.65=21.90 sqm
MATERIAL
8564 15 mm thick, light weight, fully perforated square/butt edge sqm 23.0000
integral densified, false ceiling tiles of size 595x595 mm.
Ceiling area = 21.90 sqm +

1.10 sqm (Add 5% wastage)
Total = 23.00 sqm
of size 50x32 mm
2 x 6.00 m=12m +0.60 (Add 5% wastage ) = 12.60 m
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 metre 73.6600
mm
11 x 3.65 m = 40.15 m + 5 x 6.00 = 30.00 m
Total= 70.15 m +3.51 ( Add 5% wastage )
Total = 73.66m
7025 Self tapping pan head nickel coated mild steel screws of size 1000 Nos 0.3920
13 x 3.2 mm
7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash each 19.0000
fastener
7274 Glass wool 50 mm thick sqm 23.0000
21.90 +1.10 (Add 5% wastage) = 23.00 sqm
764 Calcium silicate base compound for jointing calcium silicate kg 4.8200
tiles
22.81/103.68 x 21.9 = 4.82 kgs
7026 Fibre joint tape 50 mm wide (90 metre) roll each roll 0.2700
1.27/103.68 x 21.90 = 0.27 roll
9999 Sundries such as scaffolding, tools, bits, etc. L.S. 130.0000
LABOUR
0.30x21.90=6.57 days
0.13x21.90=2.847 days
0.35x21.90=7.665 days
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 21.90 sqm.
Cost of 1 sqm.
Say
26.25 Providing and fixing 15 mm thick false ceiling tiles at all

heights with integral densified calcium silicate reinforced with
fibre and natural filler false ceiling tiles of Size 595x595 mm of
approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987,
Light reflectance of 85% (minimum). Non combustible as per
BS:476 (part-4), fire performance as per BS:476 (part 6 &7),
humidity resistance of 100%, thermal conductivity < 0.043
W/m K as per ASTM 518:1991,in true horizontal level on the
existing frame work consisting of T-sections and Lsections
suitably fixed
according to tile size as per direction of Engineer-in-charge.

MATERIAL
8589 Calcium Silicate tegular edged celling tiles 595x595 mm and sqm 10.5000
15 mm thick
10 + 0.5 (Add wastage @5%) = 10.5 sqm
9977 Carriage L.S. 14.9500
LABOUR
9999 Sundries L.S. 31.0700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.26 Providing & fixing false ceiling at all heights with GRG (Glass
Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595
mm of approved texture, design and patterns having moisture
content less than 2%, humidity resistance of 99%, NRC0.50 to
0.75 as per IS 8225:1987, Non combustible as per BS 476 (part
4)- 1970 and light reflectance of 85% (minimum) to be laid in
true horizontal level suspended on interlocking metal T-Grid
of hot dipped galvanised iron section of 0.33mm thick
(galvanized @ 120 grams per sqm including both sides)
comprising of main-T runners of size 15x32 mm of length
3000 mm, cross - T of size 15x32 mm of length 1200 mm and
secondary intermediate cross-T of size 15x32 mm of length
600mm to form grid module of size 600 x 600 mm, suspended
from ceiling using galvanised mild steel items (galvanizing @
80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6
dash fasteners, 6 mm dia fully threaded hanger rod up to
1000 mm length and L-shape level adjuster of size 85x25x2
mm. Galvanised iron perimeter wall angle of size 24x24x0.40
mm of length 3000 mm to be fixed on periphery wall /
partition with the help of plastic rawl plugs at 450 mm centre
to centre and 40 mm long dry wall wood screws. The work
shall be carried out as per specifications, drawing and as per
directions of the Engineer-in-Charge.

MATERIAL
Celling area =100 sqm
Add wastage @ 5% = 5 sqm
Total=105.00 sqm
8581 12 mm thick micro tegular edged semi perforated GFRG (Glass sqm 105.0000
Fibre Reinforced Gypsum) false celing tiles of Size 595x595
mm
8555 Galvanized iron main-T ceiling sections 15x32x0.33 mm (3000 each 29.5000
mm long)
Including wastage @ 10%
8591 Galvanized iron perimeter wall angle 24x24x0.40 mm (3000 each 13.5000
mm long)
8556 Galvanized iron intermediate cross-T section 15x32x0.33 mm each 147.0000
(1200 mm long)
8587 Galvanized iron intermediate cross- T section 15x32x0.33 mm each 147.0000
(600 mm long)
8588 Galvanised MS hanger rod 6mm dia MS fully threaded up to each 72.0000
1000 mm length
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm each 72.0000
long
8211 40mm SS with plastic rawl plugs 100 nos 1.0000
9999 Sundries L.S. 310.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.26.2 With fully perforated 12 mm thick micro tegular edged or 10

mm thick square edged GRG false ceiling tiles.
MATERIAL
Celling area =100 sqm
Add wastage @ 5% = 5 sqm
Total=105.00 sqm
8582 12 mm thick micro tegular edged fully perforated GFRG (Glass sqm 105.0000
Fibre Reinforced Gypsum) false celing tiles of Size 595x595
mm
8555 Galvanized iron main-T ceiling sections 15x32x0.33 mm (3000 each 29.5000
mm long)
8591 Galvanized iron perimeter wall angle 24x24x0.40 mm (3000 each 13.5000
mm long)
8556 Galvanized iron intermediate cross- T section 15x32x0.33 mm each 147.0000
(1200 mm long)
8587 Galvanized iron intermediate cross-T section 15x32x0.33 mm each 147.0000
(600 mm long)
8588 Galvanised MS hanger rod 6mm dia MS fully threaded up to each 72.0000
1000 mm length
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm each 72.0000
long
8211 40mm long SS screws with plastic rawl plugs 100 nos 1.0000
9999 Sundries L.S. 310.7000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.27 Providing and fixing mineral fibre false ceiling tiles at all
heights of size 595X595mm of approved texture, design and
pattern. The tiles should have Humidity Resistance (RH) of
99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052
- 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in
true horizontal level suspended on interlocking T-Grid of hot
dipped all round galvanized iron section of 0.33 mm thick
(galvanized @120 gsm) comprising of main T runners of 15x32
mm of length 3000 mm, cross T of size 15x32mm of length
1200 mm and secondary intermediate cross T of size 15x32
mm of length 600 mm to form grid module of size 600x600
mm suspended from ceiling using galvanized mild steel item
(galvanised@80gsm) 50 mm long 8mm outer diameter M-6
dash fasteners, 6 mm diameter fully threaded hanger rod up
to 1000 mm length and L-shape level adjuster of size 85x25x2
mm, spaced at 1200 mm centre to centre along main ‘T’. The
system should rest on periphery walls /partitions with the
help of GI perimeter wall angle of size24x24X3000 mm made
of 0.40 mm thick sheet, to be fixed to the wall with help of
plastic rawl plug at 450 mm centre to centre & 40 mm long
dry wall S.S. screws. The exposed bottom portion of all T-
sections used in false ceiling support system shall be pre-
painted with polyester baked paint, for all heights. The work
shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge.
26.27.1 With 16 mm thick bevelled tegular mineral fibre false
ceiling tile (NRC 0.55 to 0.6
26.27 Providing and fixing mineral fibre false ceiling tiles at all
heights of size 595X595mm of approved texture, design and
pattern. The tiles should have Humidity Resistance (RH) of
99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052
- 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in
true horizontal level suspended on interlocking T-Grid of hot
dipped all round galvanized iron section of 0.33 mm thick
(galvanized @120 gsm) comprising of main T runners of 15x32
mm of length 3000 mm, cross T of size 15x32mm of length
1200 mm and secondary intermediate cross T of size 15x32
mm of length 600 mm to form grid module of size 600x600
mm suspended from ceiling using galvanized mild steel item
(galvanised@80gsm) 50 mm long 8mm outer diameter M-6
dash fasteners, 6 mm diameter fully threaded hanger rod up
to 1000 mm length and L-shape level adjuster of size 85x25x2
mm, spaced at 1200 mm centre to centre along main ‘T’. The
system should rest on periphery walls /partitions with the
help of GI perimeter wall angle of size24x24X3000 mm made
of 0.40 mm thick sheet, to be fixed to the wall with help of
plastic rawl plug at 450 mm centre to centre & 40 mm long
dry wall S.S. screws. The exposed bottom portion of all T-
sections used in false ceiling support system shall be pre-
painted with polyester baked paint, for all heights. The work
shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge.
26.27.1 With 16 mm thick bevelled tegular mineral fibre false ceiling

tile (NRC 0.55 to 0.6
MATERIAL
8552 Mineral fibre bevelled tegular edged ceiling tiles 595x595 mm, sqm 105.0000
16 mm thick
Area = 100 sqm +
5 sqm (Add for wastage @5%)
Total = 105 sqm
8555 G.I. main runner 15X32mm of 3000 mm length, 0.33mm thick each 29.5000
including 10 % wastage
8556 G.I. cross Tee 15X32mm of 1200mm length 0.33mm thick each 147.0000
8557 G.I. cross Tee 15X32mm of 600mm length, 0.33 mm thick each 147.0000
(3.00 metre long)
8558 Galvanised Iron hanger rod 6mm dia fully threaded up to each 72.0000
1000mm length

50mm long
9999 Sundries i.e. scaffolding etc L.S. 187.9500
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.27.2 With 20 mm thick bevelled tegular mineral fibre false ceiling

tile (NRC 0.7)
MATERIAL
8554 Mineral fibre bevelled tegular edged ceiling tiles 595x595mm, sqm 105.0000
20 mm thick
Area = 100 sqm +
Total = 105 sqm
8587 G.I. cross Tee 15X32mm of 600mm length, 0.33 mm thick each 147.0000
(3.00 metre long)
1000mm length
8596 Galvanised MS 8 mm outer diameter 50mm long each 72.0000

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.27.3 With 16 mm thick bevelled tegular mineral fibre Anti-

microbial false ceiling tile confirming to ISO 5 (class 100 )
specifications

MATERIAL
8553 Mineral fibre bevelled tegular edged ceiling tiles 595x595 mm, sqm 105.0000
16 mm thick with bio block, confirming to ISO 5 (class 100)
specifications
Area = 100 sqm +

Total = 105 sqm
8557 G.I. cross Tee 15X32mm of 600mm length,0.33 mm thick each 147.0000
(3.00 metre long)
1000mm length

50mm long
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.28 Chipping of unsound/weak concrete material from slabs,

beams, columns etc. with manual Chisel and/ or by standard
power driven percussion type or of approved make including
tapering of all edges, making square shoulders of cavities
including cleaning the exposed concrete surface and
reinforcement with wire brushes etc. and disposal of debris
for all lead and lifts all complete as per direction of Engineer-
In-Charge
26.28.1 75mm average thickness

Details of cost for One Sqm
75mm average thickness for beams
MACHINERY
9999 Hire charges for HILTY-TE 504 Pneumatic Chisel L.S. 5.6000
LABOUR
157 Machine Operator day 0.2000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.0 sqm
Say
26.28.2 50mm average thickness

MACHINERY
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.0 sqm
Say
26.28.3 25 mm average thickness

MACHINERY
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.0 sqm
Say
26.29 Cleaning of reinforcement from rust from the reinforcing bars

to give it a total rust free steel surface by using alkaline
chemical rust remover of approved make with paint brush
and removing loose particles after 24 hours of its application
with wire brush and thoroughly washing with water and
allowing it to dry, all complete as per direction of Engineer-In-
Charge.
26.29.1 Bars up to 12 mm diameter

(95.54 meter length of 10 mm dia bar) Bars up to 12 mm dia
(1 litre chemical shall cover 3.00 sqm area of bars)

MATERIALS
7911 Chemical Rust Remover litre 1.0000
LABOUR
(Application charges for 3.0 sqm)
9999 Putty, brush, sand paper L.S. 3.1620
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3 sqm (95.54 m length of 10 mm dia bar)
Rate per meter length of bar
Say
26.29.2 Bars above 12 mm diameter

(47.78 meter length of 20 mm dia bar) Bars above 12 mm dia
(1 litre chemical shall cover 3.00 sqm area of bars)

MATERIALS
7911 Chemical Rust Remover litre 1.0000
LABOUR
(Application charges for 3.0 sqm)
9999 Putty, brush, sand paper L.S. 3.1620
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.00 sqm (47.78m length of 20 mm dia bar)
Rate per meter length of bar
Say
26.30 Drilling suitable holes in reinforced or plain cement concrete
with power driven drill machine to a minimum depth of
100mm up to 200mm in RCC beams, lintels, columns and slabs
to introduce steel bars for sunshades/balconies including
fixing the steel bars in position using epoxy resin anchor grout
of approved make but excluding the cost of reinforcement, all
complete as per direction of Engineer-In- Charge.
26.30.1 Up to and including 12mm dia.

MATERIAL
7913 Epoxy kg 0.2000
Approx. unit Weight of Epoxy= 2000kg/cum or 2gm/cucm
Volume of Epoxy filled =3.14/4[(1.5)2-(1.2)2] x 15.5cm = 9.86

cucm
Weight of Epoxy for 10 holes=10x9.86 x 2 = 197.20 gms
say 200gms = 0.2 kg
MACHINERY
88 Hire charges of Drill machine up to 30 mm dia day 0.5000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate for 10 holes
Rate for one hole
Say
26.31 Providing, mixing and applying bonding coat of approved

adhesive on chipped portion of RCC as per specifications and
direction of Engineer-In-charge complete in all respect.
26.31.1 SBR Polymer (@10% of cement weight) modified cementitious

bond coat @ 2.2 kg cement per sqm of surface area mixed
with specified proportion of approved polymer

Details of Cost for 10.00 Sqm bonding coat
MATERIAL
7914 SBR Polymer kg 2.2000
@ 10% of cement weight= 22.00kgx10% =2.2 kg
LABOUR
9999 Scaffolding and sundries (8.06/2=4.03) L.S. 4.0300
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10.00 sqm
Rate per sqm
Say
26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of

approved make
Details of Cost for 2.20 Sqm
7913 Epoxy kg 1.0000
9999 Application charge for applying bonding coat of Epoxy L.S. 18.5000
9999 Cost of brushes etc. L.S. 8.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 2.20 sqm
Rate per sqm
Say
26.32 Providing, mixing and applying SBR polymer (of approved

make) modified Cement mortar in proportion of 1:4 (1
cement: 4 graded coarse sand with polymer minimum 2% by
wt. of cement used) as per specifications and directions of
Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of
thickness shall be done just after the surface preparation is
completed and Payment under this item shall be made only
after proper wet curing has been done and surface has been
satisfactorily evaluated by sounding / tapping with a blunt
metal instrument and/or the 75mm size cube crushing
strength at the end of 28 days to be not less than 30
N/Sqmm2).
26.32.1 12 mm average thickness.

MATERIAL
Cement mortar 1:4 (1 cement : sand) = 0.144 Cum
Qty of cement in mortar= 0.144x0.38= 0.055 MT or 55kg
@ 2% of weight of cement 55kgx2%=1.10 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Rate per sqm
Say
26.32.2 25 mm average thickness in 2 layers.

MATERIAL
=(0.144/12)x25=0.30 Cum
Cement 0.30x0.38 = 0.114 MT OR 114 kg
@ 2% of weight of cement 114kgx2% =2.28kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Rate per sqm
Say
26.32.3 50 mm average thickness in 3 layers.

MATERIAL
0.144/12)x50 = 0.60 Cum
Cement 0.60x0.38 = 0.228 MT OR 228 kg
@ 2% of weight of cement 228kgx2% =4.56 kg
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 10 sqm
Rate per sqm
Say
26.33 Providing, mixing and applying SBR polymer (of approved
make @ minimum 2% by wt. of cement used) modified
plain/reinforced cement concrete for structural members
having minimum characteristic compressive strength [with
ordinary portland cement, coarse sand and graded stone
aggregate of 10mm maximum size in proportion as per design
criteria] with specified average thickness. Note: Rates shall be
for finished surface area of concrete and shall include the cost
of labour, concrete and appropriate approved Super-
Plasticiser for rendering concrete as flowable and SBR
polymer but shall exclude cost of reinforcement, bond coat,
Shear Keys, centering and shuttering, strutting, propping etc
(Payment under this item shall be made only after proper wet
curing has been done and surface has been satisfactorily
evaluated by sounding/tapping with a blunt metal instrument)
26.33.1 50mm thick in Grade M 25 with cement content not less than
330 kg per cum
Detail of cost for 10 sqm area (0.5cum)
M25 concrete 0.5 cum of concrete@ 330 kg/cum
5.33.2.1 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement cum 0.5000
Concrete
Deduction of pumping charges
9 Pumping charges of concrete including Hire charges of pump, cum -0.5000
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
330 kg per cum
Concrete
@2% of cement 247.50 kg = 247.50X2% = 4.95 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.34 Providing and laying SBR Polymer modified (of approved make
@ minimum 2% by wt. of cement used) plain/reinforced
concrete jacket for the structural members e.g. columns,
pillars, piers, beams etc with concrete having the specified
minimum characteristic compressive strength [with ordinary
portland cement, coarse sand and graded stone aggregate of
10mm maximum size in proportion as per design criteria] with
specified average thickness all-round existing core of RCC
member.
Note: Rates shall be for finished surface area of concrete and

shall include the cost of making holes in existing RCC slab, if
required, for pouring concrete in shuttering mould of jacket
and appropriate approved Super-Plasticiser for rendering
concrete as flowable self compacting and SBR polymer but
shall exclude cost of reinforcement, bond coat, Shear Keys,
centering and shuttering, strutting, propping etc (Payment
under this item shall be made only after proper wet curing has
been done and surface has been satisfactorily evaluated by
sounding/tapping with a blunt metal instrument)
330 kg per cum
Detail of cost for 10 sqm area
M25 concrete 0.5 cum of concrete with cement content 330
kg/cum
Concrete
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
330 kg per cum
kg/cum
Concrete
@2% of cement 247.50 kg = 247.50X2% = 4.95 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.34.3 100mm thick in Grade M 25 with cement content not less

than 330 kg per cum
Detail of cost for 10 sqm area (1.00 cum)
kg/cum
Concrete
@2% of cement 330 kg = 330X2% = 6.6 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.35 Providing and injecting approved grout in proportion

recommended by the manufacturer into cracks/honey-comb
area of concrete/masonry by suitable gun/pump at required
pressure including cutting of nipples after curing etc.
complete as per directions of Engineer-in-Charge. (The
payment shall be made on the basis of actual weight of
approved grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of

weight of cement used) modified Cement slurry made with
non shrink compound in concrete/RCC work

Detail of cost for 100 kg Acrylic polymer mixed cement grout
MATERIAL
7927 Acrylic Polymer chemical for cracks kg 2.0000
Considering 1 kg of cement grout mixed with non shrink
polymer compound with cement @ 2% of cement

9999 Injecting charges of Stirrer mixed polymer grout Gun, rubber, L.S. 2250.0000
pipe and other accessories hire charges of plant, machinery
including necessary fuel and transportation of site
LABOUR
122 Foreman day 1.0000
157 Nozzleman day 1.0000
157 Pump Operator day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
26.35.2 Stirrer mixed SBR Polymer (of approved make) modified

Cement slurry made with Shrinkage Compensating Cement in
concrete/RCC work.

Detail of cost for 100kg of SBR Polymer mixed cement grout
MATERIAL
7914 SBR Polymer for crack kg 2.0000
9999 Injecting charges of Stirrer mixed polymer grout Gun, rubber, L.S. 2250.0000
including necessary fuel and transportation of site Rs 4000/-
per day including plant shall be used of doing approximate v
Hence cost per sqm (4000/50 = 80)
LABOUR
122 Foreman day 1.0000
157 Nozzle Operator day 1.0000
157 Pump Operator day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
26.35.3 Epoxy injection grout in concrete/RCC work of approved make

Details of cost for10kg Epoxy grout
MATERIAL
7913 Epoxy kg 10.0000
92 Hire charges of Plant and machinery,
it can inject - 350kg/day day 0.0300
LABOUR
157 Nozzle Operator day 0.0300
9999 Sundries (gloves goggles etc.) L.S. 5.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 kg
Cost of 1 kg
Say
26.36 Providing, erecting, maintaining and removing temporary

protective screens made out of specified fabric with all
necessary fixing arrangement to ensure that it remains in
position for the work duration as required by the Engineer-in-
charge.
26.36.1 Woven PVC cloth

MATERIAL
7915 Woven PVC cloth sqm 10.0000
9999 Fixing double scaffolding outside L.S. 11.0000
Total Material
LABOUR
For fixing and removal after complete of work @25%
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Rate for 10 sqm
Rate for 1 sqm
Say
26.37 Cleaning of exposed concrete surface of sticking material
including loose and foreign material by sand blasting with
coarse sand followed by and including cleaning with oil free
air blast as per direction of Engineer in charge.

Machinery
89 Hire charges of sand blasting equipment day 0.7000
(14 sqm per day)
90 Hire charges of compressor day 0.7000
Material
2203 Carriage of coarse sand cum 1.0000
LABOUR
9999 Sundries L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers

with approved design mix concrete having the specified
minimum characteristic compressive strength [with ordinary
portland cement, coarse sand and graded stone aggregate of
10 mm maximum size in proportion as per design criteria]
including the cost of centering and shuttering at edges and
corners etc. as directed by Engineer- in-Charge Note: Rates
shall include the providing necessary ground wires etc. The
levelling gauges, if used, shall be paid for separately. Payment
under this item shall be made only after proper wet curing has
been done and surface has been satisfactorily evaluated by
sounding/tapping with a blunt metal instrument.
330 kg per cum
Cubical qty of concrete for 10 sqm =
10x1.00x0.025 = 0.25 cum +
Wastage 25%, = 0.25x25/100=0.0625 cum
. Total=0.3125 cum
Concrete
Machinery
86 Compressor, gun, rubber pipes & other accessories- hire day 0.2500
charge of plant & machinery i/c necessary fuel
(approx. 40 sqm area of shotcrete per day = 10/40 = 0.25 day)
Labour
154 Nozzle man/ gun man day 0.4000
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
330 kg per cum
10x1.00x0.050 = 0.50 cum
Wastage 25%, = 0.50x25/100=0.125 cum
Total=0.625 cum
Concrete
Machinery
(approx. 25 sqm area of shotcrete per day = 10/25 = 0.4 day)
Labour
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
330 kg per cum
10x1.00x0.075 = 0.75 cum
Wastage 25%, = 0.75x25/100=0.1875 cum
Total=0.9375 cum
Concrete
Machinery
(approx. 15 sqm area of shotcrete per day = 10/15 = 0.665
day)
Labour
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.39 Providing and inserting 12mm dia galvanised steel injection
nipple in honey comb area and along crack line including
drilling of holes of required diameter (20mm to 30mm) up to
depth from 30mm to 80mm at required spacing and making
the hole & crack dust free by blowing compressed air, sealing
the distance between injection nipple with adhesive chemical
of approved make and allow it to cure complete as per
direction of Engineer-In-Charge.

Details of cost for 20.00 Nos Hole
MATERIAL
7921 Adhesive chemical ml 188.0000
(750 mm deep & 20 mm Dia Hole)
Volume of hole =20x(3.14/4)x2.00x2.00x7.5=471 cub cm.
Adhesive @ 40% of 471 ml=188.40 ml, Say 188 ml

7922 Bit of drilling machine for Hole up to 30mm dia each 1.0000
(One Bit done 20 Holes only)
7923 GI injection nipple 12mm dia, 75mm long each 20.0000
7924 Blowing compressed air for cleaning holes up to 30mm dia each 20.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 20 Nos hole
Cost of 1 hole
Say
26.40 Providing and fixing hard drawn steel wire fabric of size 75 x25
mm mesh or other suitable size wire mesh to be fixed & firmly
anchored to the concrete surface by means of "L" shaped mild
steel shear key welded with existing reinforcement including
the cost of materials, labour, tool & plants as approved by
Engineer-in-charge.

Details of cost for 10.00 sqm ( i.e 77.50 kg.)
MATERIAL
7925 L shaped 100mm long, 10mm dia mild steel shear key kg 1.5500
key to be provided at 0.5 mtr centre to centre in each
direction
Total no. of Shear key of MS Bar in 10sqm = 25 nos
25x0.10x0.617=1.55 kg
91 Welding charges of shear key to existing reinforcement each 25.0000

75x25mm, weight 7.75kg/sqm
75x25 mm = 10.00 sqm + Add 5%
wastage = 0.50 sqm Total = 10.50 sqm
9977 Carriage at site L.S. 5.6100
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.41 Designing, providing, installing and fixing factory finished

custom designed cold form Light Gauge Steel Framed super
structure comprising of steel wall panel, trusses, purlins etc
manufactured out of minimum 0.75 mm thick steel sheet as
per design requirements. The steel sheet shall be galvanized
(AZ- 150gms Aluminium Zinc Alloy coated steel having
minimum yield strength 300-550 Mpa) conforming to AISI
specifications and IBC 2009 for cold formed steel framing and
construction and also as per IS: 875- 1987, ISO 800-1984 and
IS:801- 1975. The wind load shall be as per provisions of IS
875 (part -III). LGSFS frame shall be designed as per IS: 801
using commercially available software such as Frame CAD Pro-
11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-
2011 or equivalent. Proper usage of
Connection Accessories like Heavy Duty Tension Ties, Light
Duty Hold-ons, Twist Straps (to connect truss with wall
frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-
Shaped Angles for better structural stability. The framing
section shall be cold form C-type having minimum web depth
89 mm x 39mm flange x 11mm lip in required length as per
structural design requirement duly punched with dimple/slot
at required locations as per approved drawings. The slots will
be along centre line of webs and shall be spaced minimum
250mm away from both ends of the member. The frame can
be supplied in panelized or knock down condition in specific
dimensions and fastened with screws extending through the
steel beyond by minimum of three exposed threads. All self
drilling tapping screws for joining the members shall have a
Type II coating in accordance with ASTM B633(13) or
equivalent
corrosion protection of gauge 10 & 12, TPI 16 & 8 of length

20mm. The frames shall be fixed to RCC slab or Tie beam over
Neoprene rubber using self expanding carbon steel anchor
bolt of dia as per approved drawings. design subject to
minimum 12mm diameter and 121mm length conforming to
AISI 304 and 316 at 500mm c/c with minimum embedment of
100mm in RCC (RCC to be paid separately) and located not
more than 300mm from corners or termination of bottom
tracks complete in all respects. The item also includes the
submission of stability reports duly examined and issued by
any NIT/IIT. The rate includes the concept design, detailed
design, fabrication of sections, transportation, installation and
all required fixing arrangement at site as described above.

Details of cost for 1.00 Kg
MATERIAL
8579 Cold form light gauge Steel C-section of thickness 0.75mm i/c kg 1.0500
zinc coating/sliting etc.
= 1.00 + 0.05 (Add for wastage @5%) = 1.05 kg
Deduct for
8580 Scrap value wastage of cold form light gauge steel kg -0.0500
Labour for assembling/ fixing etc
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1.00 kg
Say
26.42 Providing and fixing of external wall system on Light gauge

steel frame work with outer face cement boards as per
standard sizes fixed with self- drilling / taping screws /
fasteners @ 60cm c/c of approved make. A groove of 2 mm to
3mm shall be maintained and grooves shall be sealed with
silicon based sealant. The board shall be fixed in a staggered
pattern. Screws shall be of counter sunk rib head of 1.60mm
to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45
mm and. Internal face 12.5 mm thick gypsum plaster board
fixed on cement board as per standard sizes fixed with self-
drilling / taping screws / fasteners @ 60cm c/c of approved
make, proper taping and jointing to be done using fibre mesh
tape and epoxy and acrylic based jointing compound for
seamless finish.(cost of frame work to be paid for separately)
26.42.1 Outer face: Outer face having 6mm thick fibre cement board
fixed on 9mm thick fibre cement board, Type A, as per
IS:14862:2000 (high pressure steam cured) Inner Face :- 12.5
mm thick gypsum plaster board conforming to IS 2095:2011
fixed on 8 mm thick fibre cement board confirming to
IS:14862:2000 of type B (High pressure steam cured)

MATERAILS
Outer face:
238 6mm thick Type A fibre cement board Sqm 11.0000
1x10 =10 Sqm +
1.00 (Add for wastage @ 10%)
Total = 11.00 Sqm
2636 GI Screws of Gauge 10, length 45 mm for fixing cement fibre each 40.0000
board to C section.
240 9 mm thick Type A fibre cement board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2635 GI screws of gauge 10, length 25 mm for fixing cement fibre each 40.0000
board to C section Tapping and finishing Cement board joints
Sub A/R 1 Filling the Grove of 2 mm to 3 mm between 6 mm and 9 mm Sqm 10.0000
thick cement bonded particle boards.
Inner face :
239 8 mm thick Type B fibre cement board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2636 GI screw of gauge 10, length 45 mm for fixing cement bonded each 40.0000
particle board to C section
7009 12.5 mm thick tapered edge gypsum plain board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2635 GI Screws of Gauge 10, length 25 mm for Gypsum board to C each 40.0000
section.
Sub A/R 2 Filling the grove of 2 mm to 3 mm between 8 mm thick heavy Sqm 10.0000
duty cement fibre board and 12.5 mm thick gypsum plastic
board.
LABOUR
For cutting and fixing of cement and gypsum board
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.42.2 Outer face: Outer face having 8 mm thick cement bonded

particle Board fixed on 10 mm thick cement bonded particle
board. (Termite, Fire and Moisture Resistance) as per IS
14276:1995. Inner face:-12.5 mm thick gypsum plaster board
conforming to IS 2095:2011 fixed on 8 mm thick cement
bonded particle board (Termite, fire and moisture resistance)
confirming to IS:14276:1995)

MATERAILS
Outer face :
243 8mm thick Cement bonded particle board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2636 GI Screws of Gauge 10, length 45 mm for fixing cement each 40.0000
bonded particle board to C section.
249 10 mm thick Cement Bonded particle board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2635 GI screws of gauge 10, length 25 mm for fixing cement each 40.0000
bonded particle board to C section Tapping and finishing
Cement board joints
Sub A/R 1 Filling the Groove of 2mm to 3 mm between 8 mm and 10 Sqm 10.0000
mm thick cement bonded particle boards.
Inner face :
243 8 mm thick cement bonded particle board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2636 GI screw of gauge 10, length 45 mm for fixing cement
bonded particle board to C section. each 40.0000
7009 12.5 mm thick tapered edge gypsum plain board Sqm 11.0000
1x10 =10 Sqm +
Total = 11.00 Sqm
2635 GI Screws of Gauge 10, length 25 mm for Gypsum board to C each 40.0000
section.
Sub A/R 2 Filling the grove of 2 mm to 3 mm between 8 mm thick Sqm 10.0000
cement bonded particle board and 12.5 mm thick gypsum
plastic board.
LABOUR
For cutting and fixing of cement and gypsum board
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Sub A/R-1 Filling the groove (i.e. 2-3mm gap between boards),taping and
jointing of the first layer 6mm and 9mm thick fibre cement
boards with epoxy based sealing compound or with silicon
sealant. Second layer is fixed over it in a staggered pattern.

MATERIAL
1248 Epoxy based sealing Compound kg 0.1400
LABOUR
Cost of 1 sqm
Say
Sub A/R-2 Fill the groove (i.e. 2-3mm gap between boards),taping and
jointing 8mm thick fibre cement board and 12.5mm thick
gypsum plaster boards with epoxy based sealing compound,
Acrylic based sealing compound, Non woven reinforcement
Tape as per direction of Engineer in charge.(Use a flexible
knife so that no air bubble is entrapped. Allow 1-2 hours gap.
Once hard tacky or set, apply a coat of Acrylic based sealing
compound paste to flash fill the bevelled area. After 2-4 hours
go on to repeat a skin coat with Acrylic based sealing
compound to securely embed the 40mm width (non woven
reinforcement Tape. Use only flexible steel knife, such as
provided with packs, to avoid air entrapment within
compound. After overnight drying shrinkage apply a coat of
acrylic based sealing compound to compensate shrinkage.
Finally cover the bevel portion with any suitable overall skin
coat with a desired full surface-leveler material).

MATERIAL
1248 Epoxy based sealing Compound kg 0.1400
1249 Acrylic based sealing compound kg 0.2600
1250 Non woven reinforcement Tape metre 25.0000
LABOUR
Cost of 1 sqm
Say
26.43 Providing and fixing internal wall panels on Light gauge steel
frame work with 12.5mm thick gypsum plaster board
conforming IS 2095:2011 fixed on cement board as per
standard sizes fixed with self-drilling / taping screws /
fasteners @ 60cm c/c of approved make, Screws shall be of
counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10
gauge of length varying from 25 to 45 mm. Proper taping and
jointing to be done using fibre mesh tape and epoxy and
acrylic based jointing compound for seamless finish.(cost of
frame work to be paid for separately
26.43.1 Cement Fibre Board 8 mm thick as per IS 14862:2000 of type

B (High pressure Steam Cured)
MATERIAL
239 8 mm thick Type B fibre cement board Sqm 22.0000
2x10=20 sqm +
2.00 (Add for wastage @10 %)
Total = 22.00 sqm
board to C section Tapping and finishing Cement board joints.
241 12.5 mm thick Gypsum plaster board 2x10 = 20 sqm + Sqm 22.0000
2x10=20 sqm +
Total = 22.00 sqm
board to C section Tapping and finishing Cement board joints.

plastic board.
LABOUR
(For cutting & fixing cement board and Gypsum board)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.43.2 Cement Bonded particle board 8 mm (Termite, Fire &
Moisture Resistance), as per IS:14276 : 1995
MATERIAL
2x10=20 sqm +
Total = 22.00 sqm
Cement board joints.
241 12.5 mm thick Gypsum plaster board Sqm 22.0000

2x10=20 sqm +
Total = 22.00 sqm
Cement board joints.

plastic board.
LABOUR
(For cutting & fixing cement board and Gypsum board)
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.44 Providing and fixing in all exterior face panels breathable

vapour barrier underneath the cement fibre board as per
National Building Code 2009 complete as per direction of
Engineer-in-charge.

Details of cost for 10.00 Sqm
MATERIAL
2637 Vapour barrier sqm 11.0000
10.00 sqm + 1.00 sqm (Add for wastage @10%) = 11.00 sqm
LABOUR
For fixing fixing 45 sqm vapour barrier
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
26.45 Supplying and installation of moisture resistant/fire resistant

cement board as per standard sizes fixed with self- drilling /
taping screws. Screws shall be of counter sunk rib head of
1.60mm to 4 mm thick or 8 to 10 gauge of length varying from
25 to 45 mm.
26.45.1 Cement Fibre Board 6 mm thick as per IS 14862:2000 of type

B (High pressure Steam Cured)
MATERIAL
238 6 mm thick fibre cement board Sqm 11.0000
10 sqm +1 sqm (Add for wastage @10%)=11.00 sqm
board to C section Tapping and finishing Cement board joints

LABOUR
For cutting and fixing of Cement & gypsum board
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.45.2 Cement Bonded particle board 8 mm thick (Termite, Fire &

Moisture Resistance), as per IS:14276 : 1995
MATERIAL
10 sqm +1 sqm (Add for wastage @10%)=11.00 sqm
Cement board joints

LABOUR
For cutting and fixing of Cement & gypsum board
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.46 Providing and fixing in position, 200 mm thick factory made
Expanded Polystyrene Core (EPS Core) wall panels consisting
of EPS core sandwiched between two Engineered sheets of
welded wire fabric mesh duly finished with shortcrete
materials on outer faces. The fabric mesh shall be made of 3
mm dia G.I. wire mesh with 50 mm pitch in both the
directions and on both faces of the wall, kept at 120-135 mm
gap and connected by the zig zag G.I. wire of 3 mm dia at
alternate row by welding (at an angle ranging from 50-70
degree) . The EPS core shall consist of 100 mm thick EPS of
density not less than 20 kg/ per cum. Both the outer faces of
the panel shall be finished by applying the layer of 50 mm
thick cement mortar 1:3 {1 cement: 3 coarse sand (not having
more than 40% stone chips of size up to 6 mm)} À with the
help of shotcreting/guniting equipment etc at a pressure not
less than 1 bar (100Kn/m2) and both surfaces finished with
trowel. Fixing operations of wall panels shall be completed in
all respect as per drawings and specifications and under the
overall direction of the Engineer-in-charge.

Details of cost for 1.20x3.00m= 3.60 sqm
MATERIAL
8013 Factory made EPS Core wall panel /roof panel sandwiched sqm 3.7800
between two Engineered welded wire fabric mesh of 3 mm
dia G.I. wire mesh, with 50 mm pitch in both the directions,
kept at 120-135 mm gap and interconnected by the zig zag
G.I. wire of 3 mm dia at alternate row by welding.
3.60 sqm + 0.18 sqm (Add for wastage @5%)Total = 3.78 sqm
9999 Add for L-shape,U-shape & straight lap mesh L.S. 208.0000
Cement mortar 1:3 (1cement:3 coarse sand)
2x1.20x3.00x0.05= 0.36 cum
10 mm TMT bars (2 nos.75 mm long)
Aluminium C-channels (100mmx150mm long)
9999 For fixing wall with foundation L.S. 312.1500
LABOUR
9999 For carrying out shotcreting, shoring, levelling, and finishing L.S. 707.5000
the surface with trowel.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
26.47 Providing and fixing in position, 230mm thick factory made

Expanded Polystyrene Core (EPS Core) roof/floor panels made
of 3 mm dia G.I. wire mesh with 50 mm pitch in both the
directions and on both faces of panel, kept at 120-135 mm
gap and connected by the zig zag G.I. wire of 3 mm dia at
alternate row by welding (at an angle ranging from 50-70
degree). The EPS core shall consist of 100 mm thick EPS of
density not less than 20kg/ per cum. The bottom side of the
panel shall be finished by applying a layer of 60-65 mm thick
cement mortar 1: 3 {1 cement: 3 coarse sand (not having
more than 40% stone chips of size up to 6 mm)} À with the
help of shotcreting equipment etc at a pressure of not less
than 1 bar (100Kn/m2) and surface finished with trowel. The
top face of the panel shall be provided and finished by
applying 70-75 mm thick layer of cement concrete 1:1.5: 3 (1
cement :1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size). Fixing operations of roof/floor panels shall be
completed in all respect as per drawings and specifications
and under the overall direction of the Engineer-in-charge.

MATERIAL
8013 Factory made EPS Core wall panel /roof panel sandwiched sqm 3.7800
between two Engineered welded wire fabric mesh of 3 mm
dia G.I. wire mesh, with 50 mm pitch in both the directions,
kept at 120-135 mm gap and interconnected by the zig zag
G.I. wire of 3 mm dia at alternate row by welding. sqm 3.78
3.60 sqm + 0.18 sqm (Add for wastage @5%)Total = 3.78 sqm

60 mm thick on the bottom of roof slab =
1x1.2x3.00x0.060= 0.216 cum
3.8 Rate as per Item No.3.8 of SH: Mortar Cement concrete cum 0.2160
1:1.5:3
70mm thick on the top of roof slab =
1x1.20x3.00x0.07= 0.252 cum
5.3 Rate as per Item No.5.3 of SH: Reinforced Cement Concrete cum 0.2520
9999 Add for L-shape, U-shape & straight lap mesh L.S. 202.3200
LABOUR
9999 For providing concreting, shotcreting, shoring, levelling, L.S. 832.3600
plastering and finishing the surface with trowel.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
26.48 Providing and fixing of customized Aluminium form work for

monolithic construction on RCC members with repetitive
usage made up of aluminium sheets/plates of minimum 4mm
thickness and grade 6061 (Type-6). The formwork comprises
of (a) wall panel, roccker, kickerand internal soffit corner,
external soffit corner, external corner, internal corner etc., (b)
beam components i.e, beam side panel prop head for soffit
beam, beams soffit panel, beam soffit bulk head and (c) deck
components i.e. deck panel, deck prop, prop length, deck mid,
soffit length, deck beam bar. The panels are held in position
by a simple pin and wedge system that passes thorugh holes
in the out side rib of each panel. The tolerance of finished
panel shall not be less than (-1 mm) and shall conform to IS
14987-1999. Pins and wedges to be made of high grade hot
dipped galvanised mild steel. This form work also comprises of
M.S. angle iron, "Z" shaped brackets braced diagonally at 0.90
to 1.00 mtr. centre to centre on external wall face just the
level below on which to lay M.S. square tube panels (Challis)
and guard railing supports to form working platform and 40
mm dia G.I. telescopic adjustable props to support deck
formwork and beam soffit panels including de-shuttering the
formwork from odd/even level to be shifted/lifted to next
alternate odd/even level before which the points and
shuttering surface to be thoroughly cleaned, pins greasing
and shuttering surface oiling properly before fixing all
complete including sealing of gap between kicker plates of
wall panel and floors (if any) as per design of formwork as
provided by shuttering supplier and as per direction of the
Engineer-in-charge including filling and finishing the holes of
varied sizes and shapes (left by keys/pins of aluminium form
work shuttering while de-shuttering) with GP-2 Cementous
polymer compound mixed with water in ratio prescribed by
manufacturer to form consistent workable dough for pushing
it in the holes up to full depth of wall using appropriate tools
and finishing smooth all complete as per directions of the
Engineer-in-charge.

(Assuming 100 repetitions)
MATERIAL
Aluminium formwork & MS working platform 100 sqm @
852554 = 852554
(Total material cost modified as 'D' below)
Therefore cost for using once 852554/100 = 8525.54
Deduct salvage value of aluminium for work and working
platform with 100 repetitions
@30% of bare material cost i.e,Rs.687356.25 (marked as ' A '
below ) =
687356.25 /100 @ 30% = (-) 2062.07
5772 Grease Kg 12.5000
to be applied to pins for 100 sqm @ 5pins/sqm. using 25gm
grease /pin = 100x5x25 gm = 12.50 Kg
9999 Add replacement of lost/ damaged accessories L.S. 98.8500
5773 Shuttering oil for panels @ 20sqm /ltr = 100/20 = 5.00 ltr litre 5.0000
9999 Add sundries for gaps filling with sealants etc. and T& P L.S. 400.0000
including pully, ropes and misc. tools
9999 Add for PVC sleeve and plastic cover for wall tiles L.S. 500.0000
LABOUR
116 Fitter day 5.0000
117 Assistant Fitter day 5.0000
155 Mason (Average) day 2.0000
TOTAL
Sub A/R-2 Add for filling and fishing the holes of aluminium form work each 450.0000
with GP-2
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Sub A/R - 1
Material cost
Part-1 : Aluminium formwork
4mm thick sheet of aluminium alloy grade 6061 (type-6) for
the contact face area of 100 sqm
the sheet/plate requirement including framing flanges and
specials = 100 + 120 = 220 sqm

220 sqm @ 10.72 kg/sqm = 2358.40 Kg
Add 5% extra waste = 117.92 Kg
Total = 2358.40 + 117.82 = 2476.32 Kg
4mm thick sheet of aluminium alloy grade 6061 (type-6)
5780 for aluminium formwork Kg 2476.3200

Aluminium formwork weight without wastage = 2358.40 Kg
5781 Fabrication cost for formwork panels and special including Kg 2358.4000
computerised designing for fabrication and mock testing
before transportation to site of work.
Accessories like pins, wedges and wall ties @ 5% of ( E )
Add cost towards maintenance and time to time replacement

of damaged members @5% ( E )
5782 Packaging and carting of aluminium sheet/plate to the site of Tonne 2.3600
work
Total
Say
Part-2: M S working platform on external face (required while
fixing & removing )
10.2 M.S angle iron bracket of size 50x50x6 mm Kg 270.0000
10x6.00 mtr @ 4.50 Kg/mtrs = 270 Kg
SH:10 Steel Work excluding WC, GST, CPOH & Cess )
10.16.1 M.S. Square tube panel of tubes 25x25mm, 1.8mm thick Kg 256.2500
7x2x11.45 = 160mtr + 45 mtr (railing guards) = 205 mtr @

1.25 Kg/mtr = 256.25 Kg
(Rate as per item no.10.16.1 SH: Steel Work excluding WC,
GST, CPOH & Cess )
13.50.3 Applying red oxide primer on steel work (approx. 15 sqm) Sqm 15.0000
(Rate as per item no.13.50.3 SH: 13 Finishing excluding WC,
GST, CPOH & Cess )

7343 40 mm dia G.I. telescopic adjustable props 2-3.5 mtr each 30.0000
Bare cost of material
Say
5783 M S working platform for aluminium formwork Kg 270.0000
4009 M S tube panel Kg 256.2500
7343 Telescopic props each 55.0000
= 30x2.75x2= 165 mtr. One prop length = 3m.
Total number of prop = 165/3 = 55 Nos.
Total
Aluminium formwork material cost (marked as ' E ' = 619080
Grand total
Total material cost ( B ) + ( C )
Say
Sub A/R - 2 Filling and finishing the holes of varies sizes and shades (left
by keys/pins of aluminium formwork shuttering while de-
shuttering ) with GP-2 Cementous polymer compound mixed
with water in ratio prescribed by manufacturer to form
consistent workable dough for pushing it in the holes up to
full depth of wall using appropriate tools and finishing smooth
all complete as per directions of the Engineer-in-charge.

(Assuming 100 to 120 nos holes of 0.0001cum to 0.00008 cum
size can be filled with 25 kg (i/c wastage) of GP-2 compound)
Material
5774 GP-2 Cementeous compound Kg 25.0000

(100 holes of 0.0001 cum size = 0.01 cum)
Labour
124 Mason 2nd class day 0.9000
9999 Sundries for T&P and scaffolding etc. L.S. 50.0000
Total
Cost per each (1588.30/110)
say
26.49 Providing and fixing in position factory made EPS cement
sandwich wall/roof/floor light weight solid core panels made
of core material of EPS granule balls/beads (conforming to IS
4671:1984 and shall have density not less than 15kg per cum)
adhesive, cement, sand, fly ash and other bonding material in
mortar state processed to form in a preset mould. The outer
face on both sides of the panels will be non asbestos fibre
cement board confirming to IS 14862:2000 or Calcium silicate
board confirming to EN 14306:2009 of 5mm thick each. Panel
shall be laid on 6mm thick cement mortar (1 cement: 2 fine
sand) mixed with chemical adhesive of 0.5kg per 50kg of
cement or shall be preferably fixed into 'C' channel made of
1.2mm thick MS plate screwed/fastened to the
slab/column/beam etc.
The panel shall fixed vertically with tongue and groove joint
and horizontally locked with steel bar between each other
and floors and filled with cement mortar and adhesive. Panels
should be used as floor & roofing with additional structural
support, steel or RCC depending upon the design. All the
operation shall be completed in all respect as per drawings,
Manufacturers specifications and under the overall direction
of Engineer-in-Charge (Cost of all the material is included
except "C channel" which will be paid separately).
26.49.1 Non load bearing panels 50mm thick of required size

Details of cost 10sqm
(6.95Nos x0.6m x2.40m = 10sqm)
MATERIAL
Panel area = 10.00sqm,
7996 Factory made EPS light weight composite sandwiched sqm 10.5000
wall/roof panel (50mm thick)
having core material of EPS granule balls/beads (conforming
to IS 4671:1984 and shall have density not less than 15kg per
cum).
The outer face on both sides of the panels will be non

asbestos fibre cement board confirming to IS 14862:2000 or
Calcium silicate board confirming to EN 14306:2009 of 5mm
thick each
9999 Sundries, wooden wedge for levelling, cement mortar, L.S. 37.0000
Chemical adhesive & dowel bar (6mm dia)
LABOUR
For fixing, aligning, locking the panels
123 Mason Grade -1 day 0.5000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say

Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm)
MATERIAL
cum).

thick each
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say
MATERIAL
wall/roof panel (75 mm thick)
cum).

thick each
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say

MATERIAL
cum).
thick each
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say

MATERIAL
wall/roof panel (100 mm thick)
cum).

thick each
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say
26.50 Providing and fixing in position factory made non asbestos

fibre reinforced aerated cement sandwich wall/roof/floor
light weight solid core panels made of light weight cement
concrete core composed of OPC cement, pulverized fly ash,
quick lime, cotton pulp & Gypsum in mortar state mixed with
aeration agent in a preset mould. The outer face on both sides
of the panels will be non asbestos fibre cement board
confirming to IS 14862:2000. These solid wall panels are
installed using Galvanized iron steel tracks/C channel of 1mm
thick of required sizes as recommended by manufacturer's
and fixed to floor and RCC soffit in plumb to each other with
steel screw/fasteners.
The panel shall be fixed vertically with tongue & groove joint
with cement based polymer modified jointing compound. The
exposed surface finished with fibre mesh/glass fibre tape with
polymer based jointing compound having superior flexibility.
Panels should be used as floor & roofing with additional
structural support, steel or RCC depending upon the design.
All the operation shall be completed in all respect as per
drawings, Manufacturers specifications and under the overall
direction of Engineer-in-Charge (Cost of all the material is
included except "tracks/C channel" which will be paid
separately).

(minimum 4mm thick fibre cement board)
MATERIAL
244 Factory made light weight composite non asbestos fibre sqm 10.5000
reinforced aerated cement sandwiched wall/roof panel
(50mm thick).

asbestos fibre cement board (minimum 4mm thick)
confirming to IS 14862:2000
9999 Sundries, cement based polymer modified jointing compound, L.S. 500.0000
polymer based jointing compound having superior flexibility,
fibre glass tape etc.
LABOUR
For fixing, aligning, locking the panels, glass fibre tape/fibre
mesh with a jointing compound.
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say

(minimum 5mm thick fibre cement board)
MATERIAL
245 Factory made light weight non asbestos fibre reinforced sqm 10.5000
aerated cement sandwiched wall/roof panel (75mm thick).

asbestos fibre cement board (minimum 5mm thick)
confirming to IS 14862:2000
9999 Sundries, cement based polymer modified jointing compound, L.S. 500.0000
polymer based jointing compound having superior flexibility,
fibre glass tape etc.
LABOUR
For fixing, aligning, locking the panels, glass fibre tape/fibre
mesh with a jointing compound.

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1sqm
Say
26.51 Supplying of standard quality GFRG panel of 124 mm

thickness with modular cavities purchased from GFRG panel
manufacturing plant in the country, cut to required wall sizes
and floor/ roof slab sizes in correct length and height,
including cutting of door, window and ventilator opening as
per the cutting drawing prepared by architects /design
engineers for the construction of GFRG building and loaded in
stillages for transportation to the construction site. Cost of
panel includes security deposits, hire charges of stillages &
jaws, cost of transportation in trucks/ lorries without any
damages up to 300kms including all leads and lifts from GFRG
manufacturing plant to construction site and unloading at site
using suitable fork lift/ crane. (Payment shall be made on the
basis of area of one side of panel without reduction of
opening of door/ window / ventilator). For transportation
above 300kms, additional charges to be paid.

Detail of cost for 1sqm.
MATERIALS
7368 GFRG panel of 124mm thick sqm 1.0500
9999 Transportation of panel in suitable truck L.S. 26.0000
(Rs 0.15/sqm/km) up to 300 Km
9999 Hire Charges for Stillages/Lifting jaw, unloading of panel at L.S. 17.0000
site using for lift or crane, Hire Charges for Stillages/Lifting jaw
TOTAL
Add 1% water charges
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 1 sqm
Say
26.52 Erection of GFRG Panels in walls in all floors using suitable

crane as per instructions of Engineer-in-Charge, as per cutting
drawings and structural drawings, in perfect line and plumb,
above RCC plinth beam/GFRG panel below and provide
necessary lateral/ slanting support to keep the wall panel in
safe position, providing & tieing of Reinforcement as per
structural drawings and applying a coat of water repellent
coating Zycosil/equivalent or equivalent product (1
Zycosil/equivalent compound :10 water ) to saturation level
over RCC plinth beam to provide water proofing treatment to
joint between wall panel & plinth beam as per the guide
lines / instruction by the engineer in charge. (Cost of
reinforcement, water proofing of walls and plinth beam/GFRG
panel below joints and installation of door/ window frames
before filling of concrete shall be
paid separately). The rate quoted shall include making

provision for laying of lintels, beams, sunshades, staircase
beams, lofts, plumbing work, electrical conduits and any
structural insertion etc., as per the drawing and direction of
the engineer in charge. The payment shall be made based on
the actual exposed area (one side only) of the panel. The work
shall be carried out as per the Special Conditions For Glass
Fibre Reinforced Gypsum (GFRG) Structures mentioned in NIT.
Note: i) When cutting panel, “ A" side is to be for outside or

external surface of respective external wall, and "B" side side
is to be for internal surface of wall
ii)Erection of panel is to be with reference to both building

plan & cutting drawing by following notational mark indicated
in the cutting drawing as well as notional mark written on
each panel cut as per cutting drawing

Detail of cost for 36sqm.
(4 walls of 3mx3m = 36 sqm)
LABOUR
Skilled trained crew erection team 4 persons for 4 hour
123 Mason (Brick layer) 1st class day 2.0000
For 2 Lintels works, 4 skilled men for 2 hrs
Web cutting for horizontal tie beam, 2 skilled men for 4 hrs

Placing horizontal tie beam reinforcement 4 men for 2 hrs

Cost for technical supervisor for 4 hrs (Technical supervisor =
Skilled labour)
116 Fitter (Grade 1) day 0.5000
9999 Hire charge for lateral support & Lifting jaws L.S. 150.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 36 sqm
Cost of 1 sqm
Say
26.53 Filling of empty cavities (as shown in the structural design

drawing) with quarry dust mixed with 5% cement (by volume).
After initial infill of 50 mm thick with M25 concrete at
base/bottom of cavities to seal off, infill wall panel cavities in
3 stages as detailed below, (i) 1st pour / infill to be limited to
0.3 to 0.50 m height from bottom of the panel. (ii) 2nd Pour/
infill: infilling shall be done only after 90 minutes interval
between successive pours. The maximum height of infill shall
be restricted to 1.5m height or up to the top level of door /
window. (iii) 3rd pour/infill: After an interval of 90 minutes of
second pour, infill or pour the balance height up to the
bottom of embedded RCC tie beam. enough water just
required to dampen the dry mix enough to form cake form
after each stage.
(cost of laying M25 concrete shall be paid separately) (If any

rain falls in between any stages of concrete pour, make sure
to cover the panel top to prevent ingress of water or water
falling into the cavities. In case of water collection over the
concrete inside the panel, drill 10mm hole in GFRG panel
immediately above concrete filled level to drain out water
before pour/in-fill of balance concreting)

Detail of cost for filling one panel
size 9 sqm (3mx3m Wall)
MATERIAL
1159 Stone dust/Quarry dust filling in cavities of size 230x94 mm cum 0.8500
367 OPC Cement @ 5% volume of quarry dust tonne 0.0609

Tools and plants hire charges
2 Mixer hire charges day 0.1250
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 0.85 cum
Cost of 1 cum
Say
26.54 Laying of GFRG panel as roof / floor slab panel and staircase
panel using suitable crane as per instructions of Engineer-in-
Charge, including providing support system with 25mm x
300mm-400 mm wide plywood, as runner with proper prop
below proposed micro beams including (a) Cutting of top
flange of panel to 180 mm wide (leaving 25mm projection on
either side) to provide RCC embedded micro beam as per
cutting drawings and structural drawings. (b) Reinforcement
for micro beams and tie beams to be provided in position with
proper anchorage as per structural drawings. (c) Provision for
Electrical cabling, fan hooks and laying of pipes for plumbing
work. (d) Concreting of Tie beam, micro beam and top of
GFRG panels (50 mm thick) with M-25 cement concrete mix
using coarse aggregate of size less than 20 mm including
laying of 10 gauge 100x100 size weld mesh with 25 mm
effective cover from the panel top.

(3mx3m wall panel)
LABOUR
Providing runner & support system in place for placing panel
in position with 40mm bearing on walls( 4 Skilled persons for
1/2 Hrs /1/16 days)

Lifting panel from stack by crane and placing in position with
40 mm bearing on walls 4 skilled labour for 1 hrs

Cutting & removal of top flange to protruding 25mm on either
sides for keying panel into RCC micro beams in position (every
3rd cavities runner/span in place beneath) and providing
concealed beam reinforcement in position, side shuttering for
slab for external side(with 6mm grove) also to be provided
(mean while providing fan hooks, electrical cabling, piping etc
by coordinate task by concerned skilled persons, 4 skilled
labour for 1 hrs

9999 Hire charges for runner and support system and side L.S. 29.0000
shuttering for external side of slab for 5 days
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 9 sqm
Cost of 1 sqm
Say
26.55 Supplying and fixing 10 Gauge weld mesh of size 100mm x100
mm for floor/roof slab concrete screed over the micro beams
as reinforcement. The weld mesh shall be fixed as per
drawing.

Detail of cost for 9sqm (3mx3m)
MATERIAL
Mesh area = 9.00sqm,
Add wastage @ 5% = 0.45 sqm,
1223 Steel weld mesh sqm 9.4500
Labour for filling the quarry dust
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 9 sqm
Cost of 1 sqm
Say
26.56 Application of ZMB 60/equivalent solution (100 Kg ZMB

60/equivalent, 1 litre ZMB Nano Thinner, 20 litre water & 1
Litre Zycoprime/equivalent = 122 litre/kg) over already
applied coat of Zycosil/equivalent & Zycoprime/equivalent
solution on the top of all the RCC plinth beams by brush/spray
coat before erection of GFRG over RCC plinth beams in GF. In
the case of upper floors 150 mm wide on floor slab for all the
external walls, bath/toilet/wet areas (3 hrs drying time)
before erection of wall panel on upper floors including
erection of parapet wall.

Detail of cost for 122sqm
MATERIAL
8516 ZMB 60 / equivalent kg 100.0000
8517 ZMB Thinner litre 1.0000
8518 Zycoprime / equivalent litre 1.0000
9999 Water, brush, technical supervision etc. L.S. 78.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 122 sqm
Cost of 1 sqm
Say
26.57 After erection of GFRG wall panels, seal all GFRG wall joints
with paper tape temporarily. Water proofing treatment of
vertical joints with Zycosil/equivalent water proofing Solution
(1 litre of Zycosil/equivalent & 20 litres of water stirred first &
2 litres of Zycoprime/equivalent added and stirred (total 23
litres)) with 50 ml syringe till the gap and in filled concrete is
completely saturated. After removing the paper seal, seal off
the vertical joints with water proofing material "Grout
RW/equivalent " (Sealing cost excluded.)

MATERIAL
8519 Zycosil /equivalent litre 0.0261
9999 water, syringe, etc. L.S. 16.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 3 metre
Cost of 1 metre
Say
26.58 Filling of joints between RCC plinth beam / floor slab and wall
panel of external walls, toilet / bath room / wet areas walls on
all floor and parapet wall over roof slab, stair case head room
at the time of erection of GFRG panels with Grout
RW/equivalent sealant compound after the erection of panel
before the infill of concrete in panel cavities and fine finish.
This applies for all horizontal and vertical joints between
GFRG wall and slab panels.

MATERIAL
8520 Elastobar / equivalent kg 1.0000
367 OPC Cement tonne 0.0015
9999 100 mesh silica, water, technical supervision, etc. L.S. 3.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 48 metre
Cost of 1 metre
Say
26.59 Water proofing treatment of Vertical joints (of external side

and internal side) between door frame, window & ventilator
frames (on all four sides) of outer wall over the
Zycosil/equivalent & Zycoprime/equivalent solution already
applied (before the installation of door / window / ventilator
frames in position) and fine finish with Grout RW/equivalent.

MATERIAL
8519 Zycosil / equivalent litre 1.0000
9999 Water, technical supervision, etc. L.S. 6.0000
LABOUR
Cost of 40 sqm
Cost of 1 metre (10mm thick)
MATERIAL
LABOUR
Cost of 48 metre
Cost of 1 metre
TOTAL (A1+A2)
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 1 metre
Say
26.60 Water proofing treatment of RCC sunshade with

Zycosil/equivalent water proofing Solution (1 litre of
Zycosil/equivalent & 20 litres of water stirred first & 2 litres of
Zycoprime/equivalent added and stirred (total 23 litres)) till it
meets the saturation level and testing as per RILEM or by
water drops test in which water drops do not absorb but
drops remain or rolls.

MATERIAL
8518 Zycoprime /equivalent litre 2.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 40 sqm
Cost of 1 sqm
Say
26.61 In-filling / sealing of joint between RCC lintel cum sunshade

and wall (on external side) in all floors by pushing in Grout
RW/equivalent in paste form and coving 20 mm x 20 mm after
applying a coat of Zycosil/equivalent & zycoprime/equivalent
solution before cement plastering of top, bottom and sides of
RCC sunshade.

MATERIAL
LABOUR
Cost of 40 sqm
Cost of 1 metre (10mm thick)
MATERIAL
LABOUR
Cost of 48 metre
Cost of 1 metre
TOTAL (A1+A2)
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @1% on "Z"
Cost of 1 metre
Say
26.62 Designing, Providing, installing and fixing factory finished

customed design pregalvanized high tensile steel joists
manufactured from G350 Z275 confirming to IS:277-1992,
minimum coating of galvanizing 275 gm/sqm, minimum yield
stress 35 MPa & minimum tensile strength of 380 MPa placed
1.23 metre apart to support the load of slab etc as per the
design & directions of Engineer-in-Charge.

Detail of cost for 212.816 kgs
MATERIAL
Covered area = 5.57x4.2m = 23.394 sqm
(a) 250 series Joist (G 350) - 3mm thick - Galvanised =
4 Nos x4.18 metre length = 16.72 metre
@ 10.59 kg/metre= 177.06 kg
(b) Joist Shoe plate (E 250) - 12 mm thick MS Plate (Galvanised
with 55 microns) =
2 Nos in each joist x 4 Nos. joist = 8 No's
@ 2.4kg/each = 19.2kg
(c) Bolts (M16 - Gr 8.8s), (Galvanised)
(16 x 40 bolts With washer & Nuts)=
6No's in each joist x 4 No. joists=24 Nos
24 No's@0.135kg/each = 3.24 kg
(d) Hanging Angle at corners to support lock bars
L 75x40x1.6 (Galvanised) = 2x4.18 metre =8.36 metre
@1.60kg/metre = 13.376 kg
Total weight = 177.06+19.2+3.24+13.376 = 212.816 kgs
1012 Pregalvanized high tensile steel kg 212.8160
LABOUR (Reference item no 10.1)
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 212.816 kgs
Cost of 1 kg
Say
26.63 Providing and fixing special adjustable lock bars of mild steel
E-250 to support the temporary plywood for work between
joists during construction as per design & directions of the
Engineer-in-charge.

Detail of cost for 298.75 kgs
MATERIAL
Assuming special adjustable lock bar of mild steel will
become unserviceable after use of 50 times
Lock bar of size 1230mmx75mmx10mm

45 Nos x 4.35kg/each = 195.75 kg.
Lock bar of size 930mmx75mmx10mm
30 Nos x 3.3kg/each = 99.00 kg.
Total weight = 298.75 kgs
Assuming 50 repetition,
Qty taken for cost of using once =
298.75/50= 5.975 kgs
Considering salvage value @ 35%, Quantity =
5.975x(100 -35)/100 = 3.88 kgs
7336 Lock Bar (E 250) - 10 thick MS Plate kgs 3.8800
LABOUR (Reference item no 10.1)
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 298.75 kgs
Cost of 1 kg
Say
26.64 Centering and shuttering with 12mm thick shuttering plywood

confirming to IS 4990:2011 and removal of form at all heights.
Plywood will be supported on lock bars.

platform.
MATERIAL
Assuming 12mm thick plywood will become unserviceable
after use of 10 times
Area of roof = 13.50 sqm +
Total = 14.175 sqm.
Qty taken for cost using once = 14.175/10 = 1.4175 sqm
8659 12mm thick waterproofing plywood confirming to IS sqm 1.4175
4990:2011
LABOUR
(Reference item no 5.9.20)
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 13.50 sqm
Cost of 1 sqm
Say
26.65 Providing and fixing roofing consist of 0.8 mm thick galvanized

steel deck sheet confirming to IS 277:1992 used as permanent
shuttering over which MS wire mesh 3mm laid at 100x100
mm grid including edge trim covered with concrete. This
metal deck will be supported on structural steel beam with
shear studs. (Structural steel like Beam, column, joists etc. &
concrete of different grade as per design will be paid
separately).

MATERIAL
Weight of GI sheet for 10sqm = 76.7 kgs +
Add wastage @ 3% = 2.3 kg.
Total = 79.00 kg
8019 GI sheet 0.8 mm thick confirming to IS 277:1992 kg
Length wire mesh 200metre/10 sqm.
Weight of wire @ 0.06 kg/m. total weight = 12 kgs +
Add wastage @ 5% = 0.6 kgs.
Total 12.6 kg
1217 GI Wire mesh 100x100 mm kg
2314 Carriage of sheet & wire tonne
1218 Shear stud each
9999 Nails/Tagged screws L.S.
9999 Labour for fixing shear stud L.S.
Labour for sheeting (Ref item no 26.19.1)
130 Mistry day
112 Carpenter 2nd class day
114 Beldar day
Labour for laying wire mesh (Ref item no 5.22.2)
102 Blacksmith 1st class day
114 Beldar day
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.66 Providing and fixing in position, 130 mm thick factory made
Expanded Polystyrene Core (EPS Core) wall panels consisting
of EPS core sandwiched between two Engineered sheets of
welded wire fabric mesh duly finished with shortcrete
materials on outer faces. The fabric mesh shall be made of 3
mm dia zinc coated G.I. wire mesh with 50 mm pitch in both
the directions and on both faces of the wall and connected by
GI wire of 3mm dia at alternate row by welding. The EPS core
shall consist of 60 mm thick EPS of density not less than 16
kg/ per cum. Both the outer faces of the panel shall be
finished by applying the layer of 35 mm thick cement mortar
1:3 {1 cement: 3 coarse sand (not having more than 40%
stone chips of size up to 6 mm)} with the help of
shotcreting/guniting equipment etc at a pressure not less
than 1 bar (100KN/m2) and both surfaces finished with
trowel. Fixing operations of wall panels shall be completed in
all respect as per drawings and specifications and under the
overall direction of the Engineer-in-charge.

MATERIAL
Area of EPS panel = 3.60 sqm +
Add wastage @5%. = 0.18 sqm
Total = 3.78 sqm
8020 Factory made EPS Core wall panel /roof panel sqm 3.7800
sandwiched between two Engineered welded wire fabric
mesh of 3 mm dia G.I. wire mesh, with 50 mm pitch in both
the directions, connected by G.I. wire of 3mm dia at alternate
row by welding
9999 Add for L-shape, U-shape & straight lap mesh L.S. 208.0000
2x1.20x3.00x0.035= 0.252 cum
10 mm TMT bars 8 nos of 0.60 metre long.
Total length = 4.8 m @ 0.617 kg/metre.
Total weight = 2.96 kg
5.22.6 Rate as per 5.22.6 (SH:5 Reinforced Cement Concrete) kg 2.9600
9999 Tag screw with washers for wire mesh fixing L.S. 78.0000
9999 For fixing wall with foundation L.S. 312.1500
LABOUR
9999 For carrying out shotcreting, shoring, levelling, and finishing L.S. 707.5000
the surface with trowel.
Total
TOTAL
TOTAL
TOTAL
Cost of 3.6 sqm
Cost of 1 sqm
Say
26.67 Providing and fixing of external thermal insulation and

composite system with First layer of self-extinguishing type
Expanded Polystyrene (EPS) insulation boards of 120 mm thick
( max 1mX0.5m section), confirming to IS 4671:1984, having
thermal conductivity of 0.034 W/mK, (measured as per IS
3346-1980), density of 20-24 kg/m³ measured as per IS 5688-
1982, Fire retardant property self-extinguishing type as per EN
13501-1, bonded with special polymer modified cementitious
adhesive confirming to EOTA ETAG 004 (European Technical
Approval) formulated to bond polystyrene insulation boards
to typical mineral substrate (according to ETAG 004) and
Polypropylene mechanical fasteners with plastic pin
confirming to EOTA ETAG 014
(European Technical Approval) having dia 10mm & L=200mm

on finished level wall and the junction between two adjacent
EPS boards to be sealed with low expansion moisture cure
Polyurethane Foam. Second layer consists of Fiberglass mesh
covered with alkali-resistant coating, mass per unit area ≥145
gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special
polymer modified cementitious Base Coat with hydrophobes
and the corners will be protected with Corner-beads with
alkali-resistant mesh wings at least 10 cm wide, mesh mass
per unit area min 145 gm/m². The surface will be levelled,
finished, made smooth complete in all respect as per
manufactures specification and as per directions of Engineer-
in-Charge.

Material
Area of insulation board = 10 sqm +
Total = 11.00 sqm
8562 Expanded Polystyrene insulation board 120 mm thick sqm 11.0000
confirming to IS 4671-1984, Fire retardant property self-
extinguishing type as per EN 13501-1
1252 Cementitious polymer base adhesive confirming to EOTA kg 50.0000

ETAG 004 (European Technical Approval)
1253 Polypropylene mechanical fastener with plastic pin confirming each 100.0000
to EOTA ETAG 014 (European Technical Approval) having dia
10mm & L=200mm
1254 Moisture cure Polyurethane Foam 750 ml 0.8000

1255 PVC Corner Bead of size 25mmx25mm fixed with glass fibre metre 5.0000
mesh (100mm x 100mm)
1256 Cementitious polymer base coat confirming to EOTA ETAG kg 50.0000
004 (European Technical Approval)
1257 Fiberglass mesh with alkali-resistant coating having mass per sqm 10.0000
unit area ≥145 g/m2, mesh size: 3͘9x4͘0 mm ±10%
Labour
9999 Trowel, Angle Float, Brushes, sand paper etc. L.S. 72.2500
9999 Sundries (PVC drip bead with glass fibre mesh wing (100mm x L.S. 1445.0900
100mm), expansion joint, starter track of 1mm thick
aluminium alloy (120mm wide), polyurethane sealant,
scaffolding etc.)
Total
TOTAL
Add GST on "X"
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.68 Providing and laying factory made Precast concrete solid

blocks of 200 mm thickness of grade M10 made of C&D waste
from approved manufacturer in foundation and plinth in:

MATERIAL:
8658 Precast C&D waste concrete block 1000 Nos 0.1109
2201 Carriage of blocks 1000 Nos 0.1109
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
26.69 Providing and laying factory made Precast concrete solid

blocks of 200 mm thickness of grade M10 made of C&D waste
from approved manufacturer in superstructure above plinth
level up to floor V level

MATERIAL:
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 cum
Say
26.70 Providing and laying half block masonry with factory made
Precast concrete solid blocks of 100 mm thickness of grade
M10 made of C&D waste from approved manufacturer in
foundation and plinth in:
26.70.1 Cement mortar 1:4(1 cement : 4 coarse sand)

MATERIAL:
9999 Sundries L.S. 13.5200
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.71 Providing and laying half block masonry with factory made
Precast concrete solid blocks of 100 mm thickness of grade
M10 made of C&D waste from approved manufacturer in
superstructure above plinth level up to floor V level:

MATERIAL:
9999 Sundries L.S. 13.5200
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.72 Providing and laying 60mm thick factory made cement

concrete paver block of approved shape and colour of M -30
grade made of C&D waste by block making machine with
vibratory compaction laid in required pattern and including
over 50mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of
Engineer-in-charge.

MATERIAL:
7776 Concrete paver block of grade M-30 made of C&D waste sqm 10.0000
(60mm thickness)
Bedding layer - 50mm thick
10x0.050=0.50 cum
2261 Carriage of fine sand cum 0.1500
Laying charges (Based on actual observation)
LABOUR
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.73 Fabrication & Manufacturing of Prestressed Hollow Core slab

(Hollow area 25 to 30%) of different thickness & modular
width 1200 mm in Controlled Factory Environment with
approved methodology confirming to IS 10297:1982 by using
long line casting method having arrangement of proper steel
bed. Concreting should be done by batch mixing plant capable
of producing zero slump concrete, transported through
automatic shuttels of standard make & layed on bed with the
help of extruder/Slip former, finishing, curing and also
provision of steam curing. Cutting, making necessary cut-
out/holes of required sizes for services in slab element after
achieving required strength, yard handling & stacking all
complete as per approved shop drawings & design mix as per
the direction of the Engineer-in-charge. (Cost of strands
should be paid separately). Note: Excess/less cement over the
specified cement content used as per design mix is
payable/recoverable separately)
26.73.1 Concrete Grade-M-40 (cement content 400 kg )

26.73.1.1 100 mm thick hollow core slab
Code no Description Unit Quantity
Detail cost of 10.80 cum (120 Rmt )
120 Rmt X 1.20 m X .10 (25 % hollow)
5.33.2.4 Rate as per item no 5.33.2.4 of SH RCC cum 10.8000
5.35 Rate as per item no 5.35 of SH RCC quintal 5.4000
9999 Hollow core bed cost L.S. 1301.0000
31 Steam curing by using boiler /Heater cum 10.8000
9999 Extra cost for preparing zero slump concrete L.S. 936.0000
9999 Cutting, marking, lifting & transportation L.S. 578.0000
9999 Sundries L.S. 13.0000
5.41.1 Rate as per item no 5.41.1 of SH RCC sqm 312.0000
(120x2x(1.20+0.10)=312)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
120 Rmt X 1.20 m X .12 (25 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.12)=316.80)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.15 (25 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.15)=324.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X0.20 (30 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.20)=336.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.25 (30 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.25)=348.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.30 (30 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.30)=360.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.35 (30 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.35)=372.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.40 (30 % hollow)
9999 Sundries L.S. 13.0000
(120x2x(1.20+0.40)=384.00)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
26.73.2 Extra for using M-50 (Cement content 425 kg) instead of M-40
26.73.2.1 100mm thick hollow core slab

120 Rmt X 1.20 m X .10 (25 % hollow)
Cement for M-50 Mix = 4.590 T
Difference 0.270 T
Plasticizer for M-50 Mix = 91.800 Kgs
Difference 5.400 Kgs
7318 Plasticizer or Super Plasticizer 2% of cement content kg 5.4000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X .12 (25 % hollow)
Difference 0.324 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.15 (25 % hollow)
Difference 0.405 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X0.20 (30 % hollow)
Difference 0.504 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.25 (30 % hollow)
Difference 0.630 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.30 (30 % hollow)
Difference 0.756 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.35 (30 % hollow)
Difference 0.882 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.40 (30 % hollow)
Difference 1.008 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X .10 (25 % hollow)
Difference 0.432 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X .12 (25 % hollow)
Difference 0.518 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.15 (25 % hollow)
Difference 0.648 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X0.20 (30 % hollow)
Difference 0.806 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
120 Rmt X 1.20 m X 0.25 (30 % hollow)
Difference 1.008 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.30 (30 % hollow)
Difference 1.210 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say


120 Rmt X 1.20 m X 0.35 (30 % hollow)
Difference 1.411 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say

120 Rmt X 1.20 m X 0.40 (30 % hollow)
Difference 1.613 T
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
26.74 Fabrication and manufacturing of solid precast concrete

element with provisions of shear keys, connecting loops,
dowel tubes and proper lifting accessories for walls, beams,
slabs, stairs, column etc, of various thickness, shape and size
of different concrete grades manufactured in controlled
factory environment with approved methodology including
moulds (Pallet system, Tilts form, table moulds, battery
moulds, vertical moulds, beam moulds, column moulds,
staircase moulds, Facade mould, etc.), mixing, transporting
and placing of concrete, vibrating, curing, finishing, making
necessary cut-out/holes of required sizes for services, yard
handling & stacking all complete as per IS 11447:1985 and as
per approved shop drawings and design mix as per the
direction of Engineer-in-Charge (Cost of reinforcement,
Mechanical, Electrical and Plumbing inserts will be paid
separately).
Note: Excess/less cement over the specified cement content

used as per design mix is payable/recoverable separately)
26.74.1 Concrete grade M-35 (Cement content 370 kgs)

Detail of cost for 1.26 Cum
Considers a wall 2.80 X 3.00 X 0.15 = 1.260 Cum
5.35 Rate as per item no 5.35 of SH RCC (M-35 (370 kgs)) quintal 0.2520
9999 Cost of hosting and fixing moulds L.S 372.0000
5.9.1 Rate as per item 5.9.1 of SH RCC, Side Shuttering of walls sqm 1.7400
((2.8+3)x2x0.15=1.74)
9999 Table buffing & oiling L.S 174.0000
9999 Sundries (Extra labour for Lifting, transportation, stacking of L.S 230.0000
finished precast elements)
5.41.1 Rate as per item no 5.41.1 of SH RCC (Curing using curing sqm 18.5400
compound)
7929 Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos each 12.0000
on each side
7930 dowel tubes (Corrugated GI pipes 50 to 80mm dia) metre 3.0000
(For horizontal joints)
9999 Shear key (6mm thick mechanically folded MS plate) L.S 115.0000
7931 Hooks for lifting (Alloy steel) having 2.5 tonne capacity each 2.0000
Labour for fixing accessories & inserts such as shear loops,
shear keys, dowel tubes, lifting hooks
155 Mason (Average) day 0.5000
Labour for operating of hoisting & fixing moulds
157 Operator day 0.5000
116 Fitter (Grade 1) day 0.3000
9999 Sundries (Labour cost such as crane, trailer(flat bed & a L.S 173.4100
frames) & panel racks for stacking of precast concrete panel
wall)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.26 Cum
Cost of 1 Cum
Say

Difference 0.030 T
Plasticizer for M-35 Mix =7.400 Kgs
Difference 0.600Kgs
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 Cum
Say
Difference 0.055 T
Difference 1.100Kgs
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 Cum
Say

Difference 0.070 T
Difference 1.400Kgs
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1.00 Cum
Say
26.75 Providing & laying in position Prestressing steel strands (low
relaxation) on hollow core bed by using mechanical pulling
arrangement like Rabbit/ Bed master including all accessories
for Stressing & destressing operations as per approved make
conforming to IS1343 & grade FY-1860 etc, complete as per
drawings and direction of Engineer -in-charge.

Considering Four beds
8 strands (each strand is of 9.53mm dia consisting
of 7 wires) X 4 beds X 120 Rmt X 0.453 Unit wt =
8 x 4 x 120 m x 0.453 kg/m = 1739.52 kg
Say 1740kgs.
Details of Cost for 1740 Kg
MATERIALS
Quantity = 17.40 quintal +
Add wastage 10 % = 1.74 q.
Total = 19.14 q
993 FY-1860 grade wire strands quintal 19.1400
2205 Carriage of material tonne 1.9140
9999 Strand cutting by cutting saw machine L.S. 555.0000

Wedges
9999 Cost of wedge L.S. 617.0000
Resources - For laying and fixing cables, anchorages
128 Mate day 1.0000
Labour- For prestressting
128 Mate day 2.0000
116 Fitter (Grade-1) day 3.0000
157 Operators day 2.0000
MACHINERY
(12 Hrs required to Lay 1.914 Ton strands on 4 beds)
32 Stressing Machine (jack with pump) day 1.5000
28 Hire & Running Charges of Crane 20 Ton Capacity
to handle strands day 1.5000
(8 Nos. strand coils ( average weight 3 Ton each) required to
lay one bed of 8 strands as one coil can lay only one strand at
a time. Therefore to operate one complete bed total 8 Nos
strand coils required,
34 Cutting Saw Machine day 1.5000

30 Hire charges of Generator 250 KVA day 1.5000
35 Strands Roller machinery for laying strands day 1.5000
36 Bed master (Pulling strands) day 1.5000
28 Crane handling charges for bed master & stressing machine. day 1.5000
One bed master approx wt = 03 Ton (to be placed on each
bed with the help of crane for laying of strands )
One stressing Machine approx wt = 2.5 Ton (to be placed on
each active ends of bed with the help of crane for initial
pulling & stressing of strands ).
1235 Diesel for generator set (14 litres per hour for 11 hrs Litre 154.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 1740 kgs
Cost of 1 Kg
Say
26.76 Transportation of Precast Elements by flat bed Trailor (Double

/ Triple axle 40ft Length with proper accessories like A frame
etc) from factory, including the cost of loading , unloading &
stacking at site with the help of required capacity cranes.
26.76.1 Lead within 15km

Trailors having capacity 22MT
Hire charges of truck trailors
Number of trips in working day of 8 hours
N=8/{(2L/S)+2)}. Where
L=Lead in Km.,
S=Speed in Km.per hour,
1 hour is allowed for loading
& 1 hour for unloading.
L= 15 km .
9999 Charges of Trailors having capacity 22MT L.S. 1738.0000
including cost of fuel & driver cost and maintenance
28 Hire charges of Crane capacity of 30MT day 0.3667
for loading from stock yard and unloading at site for 120 MT.
128 Mate day 0.5000

9999 wooden battens for transportation L.S. 57.8000
9999 Chain for packing & binding precast elements L.S. 57.8000
9999 sundries L.S. 220.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 22 MT
Cost of 1 MT
Say
26.76.2 Add/Deduct over item 26.76.1 for every additional lead of 5

km
Extra for lead 5 km
9999 Charges of Trailors having capacity 22MT including cost of fuel L.S. 579.0000
& driver and maintenance
9999 sundries L.S. 220.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 22 MT
Cost of 1 MT
Say
26.77 Erection & Installation of Precast/Prestressed Concrete

elements in correct & final position with proper line level and
plumb at site making all arrangements (i.e cranes, push-pull
jacks & all another T & P for lifting Placing & Alignment of
elements, within erection tolerance as per IS 15916 as per
approved shop drawings and all complete as per the direction
of Engineer-in-Charge but excluding the cost of sim pads, non
shrink grout and steel works i.e hangers. All work up to fifth
floor.
26.77.1 Prestressed hollow core Slab up to 200 mm thickness

Detail of cost for 150 Sqm.
Length of element can be up to 8.00 metres.
Mobile crane (Tyre mounted) up to 25m height 100 feet
boom
44 Cost for crane up to 40 tonne capacity day 1.0000
9999 Hire charges of props & Misc L.S. 434.0000
70 Generator hiring 100kva hour 8.0000
Labour cost for erection
9999 Sundries (Miscellaneous tools and lifting slings) L.S. 500.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 150 Sqm
Cost of 1 Sqm
Say
26.77.2 Prestressed hollow core slab above 200 mm up to 400 mm

thickness
Detail of cost for 120 Sqm.
Length of element can be more than 8.00 metre and up to
14.00 metres.
67 Cost for crane up to 80 tonne capacity day 1.0000
9999 Hire charges of props & Misc L.S. 347.0000
Labour cost for erection
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 120 Sqm
Cost of 1 Sqm
Say
26.77.3 Solid concrete wall elements

Detail of cost for 18 Cum. / Day
Considering volume of different type of elements
wall elements = 15 cum (13 nos)
Beams / portal = 3 cum (02 nos)
Total no of elements = 15 nos
72 Cost for crane (50 MT) duration 01 day day 1.0000
9999 Shifting of elements L.S. 434.0000
9999 Hire charges of props & Misc for 3 days (3x3 = 9 / pc) L.S. 780.0000
1027 Erection Bolts each 60.0000
( Minimum 04 nos for each element)
Labour cost
9999 Scaffolding, hire charge of drill machine etc. L.S. 500.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 18 cum
Cost of 1 cum
Say
26.78 Providing & Applying weather proof sealant on outer joints of

approved make confirming to IS & directed by Engineer-in-
charge.
26.78.1 Sealant 25mmx10mm at joints

Detail of material required for = 1.00 metre
8646 Silicon sealant (including 5% wastage) cartridge 0.8700
9999 Scaffolding, hire charge etc. L.S. 2.8700
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 1 metre
Say
26.79 Providing & Laying of levelling sim pads required sizes (5x5cm
to 10x10cm) of PVC / Rubber to adjust level of bearing surface
of supporting members as per the direction of Engineer in
charge.
26.79.1 2mm thick

Detail of cost for 100 nos
MATERIAL
246 2 mm thick sim pad each 100.0000
LABOUR
9999 Sundries L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for100 Nos
Cost of each
Say
26.79.2 5 mm thick
MATERIAL
LABOUR
9999 Sundries L.S. 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for100 Nos
Cost of each
Say
26.79.3 10 mm thick
MATERIAL
9977 Carriage of material L.S 5.0000
LABOUR
9999 Sundries LS 10.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for100 Nos
Cost of each
Say
26.80 Providing & Grouting of dowel tubes / Shear keys / Joints of

precast members with M-60 grade cementitious grout (Non
Shrink) of approved make by suitable means ( Free flowing
/pump),curing etc. Complete as per directions of Engineer-in-
charge. (The payment shall be made on the basis of actual
weight of approved grout injected.)
26.80.1 Stirrer mixed cementitious grout (non shrink) of approved

make in dowel tubes / Shear keys / Joints of precast
members.

Detail of cost for 250 kgs non shrink cementitious grout
1251 M-60 grade cemetitious grout (Non Shrink) kg 262.5000
2209 Carriage of cementitious material tonne 0.2500
9999 Grouting charges of Stirrer mixed cementitious grout, rubber, L.S. 2250.0000
including necessary fuel and transportation of site
LABOUR
155 Masson (Average) day 1.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost for 250 Kgs
Cost of 1 Kg
Say
26.81 Providing and fixing Scaffolding net of required width made of

high density Polyethylene UV stabilized knitted on warp
knitting machines having density 100grams/sqm and shading
coefficient minimum 75% around the construction site/ for
vertical extension as per requirement including
fastening/tying with building/scaffolding pipes or with any
other fixtures etc. complete as per direction of Engineer-in-
Charge. (One time payment shall be made for providing
Scaffolding net from start of work till completion of work
including shifting if any. The Scaffolding net shall be the
property of the contractor on completion of the work)

MATERIALS:
8761 Scaffolding net sqm 300.0000
Less Salvage value taken 25% on (P)
LABOUR:
9999 Sundries for tying the net L.S. 10.0000
Total
Add 1% for water charges
Total
Total
Add CPOH @ 15% on "Y"
Total
Cost of 300 Sqm.
Cost of 1 Sqm.
Say
26.82 Providing and laying rigid EPS (cellular plastic material) blocks
conforming to ASTM standards/specifications of minimum
density 21.60 Kg/cum on floors, steps, stage etc. of required
size and shape as per direction of the Engineer-in-Charge. This
shall include the following operation.
The EPS blocks shall be cut to required shape and sizes

including cuttings for passing of services, joined together with
synthetic resin adhesives as per relevant specifications and
packed/placed in position for stepped floor or platform
formation. The top and sides surfaces to be provided with GI
woven wire mesh of aperture 5.45 mm (with wire dia 0.90
mm) secured to EPS blocks with wire pins/clips. Horizontal top
surface to be provided with 20 mm thick cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate up
to 6mm chippings) and vertical surface to be provided with
12mm cement plaster 1:4 (1 cement : 4 coarse sand). The
concrete/plastered surfaces so prepared shall be scratched
with wire brushes to form burrs, so as to act as base for
flooring or veneering/panelling to be done later as per
approved design (which shall be paid for separately complete
as per direction of the Engineer-in-Charge.

Details of cost for a Lecture Hall of area
8.40 x 16.00= 134.40 Sqm
Assuming stepped floor for a Lecture Hall having 8 rows and
each row by 100mm higher than the previous one.
(Assuming 8 rows 1.50 meter wide and four columns also 1.5
meter wide with 1.2 meter wide passage between row 1 and
2, 3 and 4 and front lecturer pedestrian.
Material
EPS blocks in sizes of = 1.20x1.20x0.10 m
8.40 m x 12 m x 0.45 m = 45.90 cum
8.40 m x 3 m x 0.15 m = 3.78 cum
49.68 cum Say = 50.00 cum
50 cum @ 21.60 Kg/cum. Total = 1080.00 kg
5744 EPS blocks kg 1080.0000
GI woven mesh of aperture 5.45 mm (with wire of dia
0.90 mm) =
134.40 sqm + 13.60 sqm = 150`.00 sqm @
1.61 Kg/sqm. Total = 241.50 kgs
5745 GI woven mesh of aperture 5.45 mm (with wire of dia 0.90 kg 241.5000
mm
Total surface area to be joined 504 sqm
considering 1/6th area for adhesive i.e. 84 sqm
84 sqm @ 100 Gm/sqm. Total = 8.50 kgs
5746 SR adhesive for joining EPS blocks kg 8.5000
9999 Wire pins/clips to secure IRC mesh to EPS blocks L.S. 675.0000
9999 T&P sundries i/c cutting tools etc. L.S. 340.0000
Labour:- For cutting arranging & packing the EPS blocks in
position including jointing with SR adhesive and making
arranging/cutting for fixing of services and fixing IRC welded
mesh to EPS blocks.
156 Fitter/Carpenter (average) day 2.0000

Cement concrete 1:2:4 (1 cement : 2 cement sand : 4 graded
stone clippings up to 6 mm size)
134.4x0.025 = 3.36 cum
4.1.3 Rate as per item no 4.1.3 SH:4 (Cement Concrete) cum 3.3600
12mm cement plaster 1:4 (1 cement : 4 coarse sand)
13.4.1 Rate as per item no 13.4.1 SH:13 (Finishing) sqm 9.2400
155 Mason (average) for making burrs day 1.0000
Total
TOTAL
TOTAL
TOTAL
Cost of 134.40 sqm
Cost of 1 sqm
Say
26.83 Applying stamping finish to the top surface of freshly laid

plain/reinforced cement concrete of specified grade in
porticos, sidewalks, driveways, pool decks and open yards as
per direction of the Engineer-in-Charge. The process shall
include the following:-
• The concrete shall be placed and screeded to the finished
grade, and floated to a uniform surface by using standard
finishing techniques. The approved colour hardener @ 2.7
kg/sqm shall be applied evenly to the surface of the fresh
concrete by the dry shake method by sprinkling in two or
more shakes, floated after each shake and trowelled only
after the final floating. The approved release agent @ 0.113
kg/sqm shall be applied evenly to the trowelled surface
before stamping or the said release agent can be applied to
the flexible polyurethane stamp moulds of approved design
and in required sizes to achieve final stamped pattern. These
stampings shall be placed on the surface of concrete in three
to four pieces at a time and tapped gently with rammers of
sufficient size & weight to leave proper stamp marks and the
process repeated for the remaining concrete surface till the
whole surface to be stamped is completed within the time
while concrete is in plastic stage of setting.
• After stamping, the curing shall be done as per

manufactures specifications. After initial curing the imprinted
joints shall be grouted using cement slurry mixed with colour
hardener as per the requirement. The surface shall be sealed
by applying acrylic based sealer not less than 0.167
litre/sqm.on finished surface.
• The construction joints shall be provided by groove cutting

of size 4mm x 20mm in panel size 3m x 3 m or lesser as per
the site conditions and filling the same with 10 mm baker rod
and providing and laying (PU) Polyurethane based joint sealer
of approved make as per manufacturer’s specifications and
finished by applying Polyurethane resin based top protective
clear coat of minimum 80 micron applied with rollers on
properly cured and dry clean surface. (Cost of concrete for
flooring is not included in this item which shall be paid
separately.)

Material
7224 Concrete hardener Kg 297.0000
7225 Release agent Litres 1.3500
7226 Sealer Kg 17.5000
7227 PU resin top coat Kg 23.0000
9999 T&P like tollers of various sizes dewatering machines i/c L.S. 6000.0000
floaters and suckers, brushes and water jet etc. (rentals only)
Labour for spreading/sprinkling the floor hardeners, floating,
trowelling, spreading the release agent, stamp moulds,
tapping of moulds into concrete shifting of moulds for repeat
process, grouting the joints and applying sealers and finishing
etc.
169 Specialized technicians day 6.0000

124 Assistant/Operators (Second Class Mason) day 6.0000
123 Mason 1st class for grouting repairs & applying sealer etc. day 2.0000

114 Helper/Beldar day 10.0000
9999 Sundries for grouts pigments etc. L.S. 500.0000
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.84 Supplying and laying of Uni-Axial Woven Polyester Geogrid

conforming to MORTH 3100 and IRC113, as soil
reinforcement/basal reinforcement including accessories like
tie-strips, nuts & bolts and loops/lugs for joining reinforcing
elements with the facia pannels, overlaps and other
protective elements for synthetic geo-grids and all other
activities required for reinforced soil walls, slopes etc
complete as per design requirements, manufacturer
specifications and as per direction of engineer-in- charge.
26.84.1 Uni Axial Woven polyester geogrid of minimum tensile

strength 40KN/m in the Longitudinal direction and 20 KN/m in
the Transverse direction.

Details of Cost for 300 Sqm.
MATERIALS:
8979 Uni Axial Woven polyester geogrid of minimum tensile sqm 300.0000
Add 5 percent of the cost of reinforcing elements geogrid for
wastage and accessories like tie-strips, nuts and bolts and
loops/lungs for joining reinforcing elements with the facia
panels, overlaps and other protective elements for geogrid
and all other activities required to complete the item in all
respect including transportation. i.e 5% of (P)
LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

respect including transportation. I.e 5% of (P)
LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:
strength 80 KN/m in the Longitudinal direction and 30 KN/m
in the Transverse direction.

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say

strength 100 KN/m in the Longitudinal direction and 30 KN/m

MATERIALS:
strength 100KN/m in the Longitudinal direction and 30KN/m

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say

strength 120KN/m in the Longitudinal direction and 30 KN/m

MATERIALS:

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:
strength250KN/m in the Longitudinal direction and 30KN/m in

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

LABOUR:
128 Mate day 0.3600

Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.85 Supplying and laying of Bi-Axial Woven Polyester Geogrid
conforming to MORTH 3100 and IRC113, as soil
reinforcement/basal reinforcement of granular road base and
sub base, area stabilization, track bed stabilization, load
transfer platforms Including accessories like tie-strips, nuts &
synthetic geo-grids and all other activities required etc.
complete as per design requirements, manufacturer
specifications and as per direction of engineer-in- charge.
26.85.1 Bi Axial Woven polyester geogrid of minimum tensile strength

20KN/m in both Longitudinal and Transverse direction.

MATERIALS:
8988 Bi Axial Woven polyester geogrid of minimum tensile strength sqm 300.0000

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say


MATERIALS:

LABOUR:
128 Mate day 0.3600
Total
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.86 Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory windows
& other Frames/Chowkhat comprising of virgin PVC polymer
of K value 58-60 (Suspension Grade), calcium carbonate and
natural fibres (wood powder/ rice husk/wheat husk) and non
toxic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter joints after applying PVC solvent cement
and screwed with full body threaded star headed SS screws
having minimum frame density of 750
kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N

(Edge), minimum compressive strength of 58 N/mm2,
modulus of elasticity 900 N/mm2 and resistance to spread of
flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant
and fixed in position with M.S hold fast/lugs/SS dash fasteners
of required dia and length complete as per direction of
Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners
shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm

tolerance in dimensions i.e depth and width of profile shall be
acceptable. Variation in profile dimensions on plus side shall
be acceptable but no extra payment on this account shall be
made.
26.86.1 Frame size 45 x 70 mm

Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre)
MATERIAL
5747 Factory made single extruded WPC (Wood Polymer metre 5.2000
Composite) solid door/window, clerestory windows & other
Frames/Chowkhat of frame size 45 x 70 mm
including carriage of frame

LABOUR
For fabrication and fixing in position
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.0000
TOTAL
TOTAL
Add GST on ''X'' (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say

(1.00+2.10+2.10=5.20 metre.)
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say
(1.00+2.10+2.10=5.20 metre)
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say

(1.00+2.10+2.10=5.20 metre.)
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say

(1.00+2.10+2.10=5.20 metre.)
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say

(1.00+2.10+2.10=5.20 metre.)
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say

(1.00+2.10+2.10=5.20 metre.)
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say
Polymer Composite) solid plain flush door shutter of required
size comprising of virgin polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/
rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having minimum density of
650 kg/cum and screw withdrawal strength of 1800 N (Face)
& 900 N (Edge), minimum compressive strength 50 N/mm2,
modulus of elasticity 850 N/mm2 and resistance to spread of
flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant
and fixing with stainless steel butt hinges of required size with
necessary full body threaded star headed counter sunk S.S
screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and necessary S.S screws shall be
paid separately)
26.87.1 30 mm thick
Details of cost for door shutter of size 2.20 sqm.
MATERIAL
5754 Factory made single extruded WPC (Wood polymer sqm 2.2000
Composite) solid plain flush door shutter 30mm thick
9977 Carriage of door shutter L.S. 29.6400
LABOUR
For fixing shutter
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
26.87.2 35 mm thick
MATERIAL
Composite) solid plain flush door shutter 35 mm thick
LABOUR
For fixing shutter
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
Polymer Composite) solid decorative type flush door shutter
of required size comprising of virgin polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibres
(wood powder/ rice husk/wheat husk) and non toxic additives
(maximum toxicity index of 12 for 100 gms) having minimum
density of 650 kg/cum and screw withdrawal strength of 1800
N (Face) & 900 N (Edge), minimum compressive strength
resistance to spread of flame of Class A category with
property of being termite/borer proof, water/moisture proof
and fire retardant. WPC to be laminated with PVC foil of
minimum 14 microns thick of approved design pasted with
hot melt adhesive on both faces of shutter and fixing with
stainless steel butt hinges of required size with necessary full
body threaded star headed counter sunk S.S screws, all as per
direction of Engineer-In- Charge. (Note: stainless steel butt
hinges and necessary S.S screws shall be paid separately)
26.88.1 30 mm thick
MATERIAL
Composite) solid plain flush door shutter 30mm thick
5761 PVC laminated foil of minimum thickness of 14 microns of sqm 4.4000
approved design
LABOUR
For pasting PVC laminated foil to door shutter and fixing door
shutter at position
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
26.88.2 35 mm thick
MATERIAL
Composite) solid plain flush door shutter 35 mm thick
approved design
LABOUR
For pasting PVC laminated foil to door shutter and fixing door
shutter at position
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
Polymer Composite) solid board one side white colour and
other side of board laminated with PVC foil of minimum 14
micron thickness of approved design pasted with hot melt
adhesive for cup boards, work stations and bathroom/kitchen
cabinet etc. of required sizes comprising of virgin polymer of K
value 58-60 (Suspension Grade), calcium carbonate and
natural fibres (wood powder/ rice husk/wheat husk) and non
toxic additives (maximum toxicity index of 12 for 100 gms)
having minimum density of 650 kg/cum and screw withdrawal
strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength 50 N/mm2, modulus of elasticity 850
N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture
proof and fire retardant and fixing with stainless steel piano
hinges/soft close clip on concealed hinges of required size
with necessary full body threaded star headed counter sunk
S.S screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel piano hinges/soft close clip on concealed hinges
and necessary S.S screws shall be paid separately)
26.89.1 18 mm thick
Details of cost for 18 mm thick WPC board for cupboard
shutter of size 2.0x1.08 metre = 2.16 sqm
MATERIAL
Composite) solid plain white coloured board of 18 mm thick

approved design
9999 Sundries L.S. 20.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
26.89.2 25 mm thick
MATERIAL

approved design
9999 Sundries L.S. 20.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Polymer Composite) solid plain white colour board for backing
of cup boards and bathroom/kitchen cabinets etc. of required
size comprising of virgin polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/
rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having minimum density of
650 kg/cum and screw withdrawal strength of 1800 N (Face)
& 900 N (Edge), minimum compressive strength modulus of
elasticity 850 N/mm2 and resistance to spread of flame of
Class A category with property of being termite/borer proof,
water/moisture proof and fire retardant and fixing with
stainless steel screws etc. all as per direction of Engineer-In-
Charge. (Note: stainless steel screws shall be paid separately)
26.90.1 6 mm thick
Details of cost for 6 mm thick WPC board for backing of
cupboard of size 2.0x1.08 metre = 2.16 sqm
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
26.90.2 12 mm thick
MATERIAL

LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
26.91 Providing and fixing factory made 18 mm thick single extruded
WPC (Wood Polymer Composite) solid plain white colour
board Jali, CNC (Computer numeric control) routed of
approved design by Engineer-in -charge which are machine
cut for duct/shaft covering, partitions and facades comprising
of virgin polymer of K value 58-60 (Suspension Grade),
calcium carbonate and natural fibres (wood powder/ rice
husk/wheat husk) and non toxic additives(maximum toxicity
index of 12 for 100 gms) having minimum density of 650
kg/cum and screw
withdrawal strength of 1800 N (Face) minimum compressive

strength N/mm2 and resistance to spread of flame of Class A
category with properties of being termite/borer proof,
water/moisture proof and fire retardant and fixing on M.S
(mild steel) frame made of 25 x 25 x 1.5 mm square hollow
box section including applying a priming coat of approved
steel primer, placed at grid made at 1.0 x 1.0 m or as per
requirement at site with necessary stainless steel fasteners
and SS screws etc., all complete as per direction of Engineer-
In- Charge.
(Note: M.S (mild steel) framework with priming coat and

necessary SS fasteners and SS screws shall be paid separately.

Details of cost for WPC jali of size
1.80 x 2.40 metre = 4.32 sqm
MATERIAL
5760 Factory made 18 mm thick single extruded WPC (Wood sqm 4.3200
Polymer Composite) solid plain white colour board Jali
including carriage
9999 Sundries L.S. 10.0000
LABOUR
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 4.32 sqm.
Cost of 1 sqm.
Say
26.92 Providing and fixing of façade at all heights with extruded

hollow Clay / Terracotta ventilated rainscreen tiles of height
250/ 300/ 400mm and length of 595 mm of approved texture,
design and pattern having Flexural Strength/ Modulus of
Rupture of ≥ 14 N/m² and maximum water absorption of 10%
tested as per ISO 10545-4:2004(E) and ISO 10545-3:1995
respectively in true level fixed to a supporting aluminium
framework(Alloy 6063 T5/T6) consisting of vertical 'T' (for
intermediates)/ 'L'(for ends/ termination)/ Tubular sections
(at corners)of size 80x60x2mm/ 40x60x2mm/ 40x40x2mm
respectively, spaced at maximum spacing of 600mm c/c
matching to the tile vertical grid, and horizontal aluminium
'C'-clamps of size 56x25x2mm thickness of length 150mm at
junction of tiles and of length 75mm at wall ends/ corners
fixed on top of the vertical sections at spacing of 250/ 300/
400mm c/c matching to the tile horizontal grid with two
numbers of self-drilling / self-tapping SS screws of size 5.5x25
mm with EPDM washers.
The vertical 'T'/'L/ Tubular' sections shall be fixed to the wall

using HDG (hot-dip-galvanized) steel L-brackets (galvanizing
thickness of minimum 80 microns)of size 110x80x6 mm at
intermediate vertical aluminium profiles and of size
220x110x12 mm at outer corners and stainless steel grade
304,M10 full threaded anchor fasteners with nylon sleeve
100mm long (for brick work) and M8 expansion anchor
fasteners 75mm long for concrete surface, spacing of brackets
to be based on a structural/ static calculation. The brackets
shall be of length 175mm at junction of two vertical
aluminium profiles and of length 100mm at intermediate
points of vertical profiles and shall be fixed to the vertical
aluminium T / L / Tubular profiles using two numbers self-
drilling/ self-tapping SS screws of size 5.5x25mm with EPDM
washers.
EPDM gaskets to be fixed in between brackets and vertical
profiles. The tiles shall be mounted on the ‘C’ clamps such
that the tiles are supported at top and bottom at both ends.
The tiles shall be additionally secured to the horizontal ‘C’
clamps using special SS clips of required size which shall be
inserted and pressed into position on the ‘C’ clamps holding
the tiles and the cut-tiles shall be glued at points to the
horizontal ‘C’ clamps by using MS Polymer sealant adhesive.
The vertical joint open groove between two adjacent tiles
shall be 5mm. The tiles and system shall be designed to resist
wind load as per IS 875 (Part 3) according to different zones.
The tiles shall be installed using the ventilated rain screen
principle with provision for natural ventilation of the space
between the façade tiles and the structural wall. The work
shall be carried out as per specification, drawing and as per
direction of the Engineer-in-Charge. Note : Scaffolding
wherever required to be paid separately.
26.92.1 With 16mm thickness (+/- 10%) terracotta tiles of grey colour

Detail of cost for 10.80 sqm (3.60 x 3.0 metre)
MATERIAL
Façade area = 10.80 sqm +
Total = 11.34 sqm
5762 16mm thick extruded terracotta tiles sqm 11.3400
of grey colour of size 300 x 595mm
7306 Aluminium Tube / T Profile kgs 17.1000
1). At outer corners tubular section 40x40x2 mm =
2 nos. 3 mtr. long = 6.00 mtr. @ 0.82 kg/mtr. = 4.92 kg
2). At ends/termination angle 40x60x2 mm =
3). At intermediate T section 80x60x2mm =
(Total = 4.92+3.18+9.00 = 17.10 kg.
7306 Aluminium “C” Clamps of size 80x25x2 mm - 150mm kgs 7.2400
(i) 150mm long = 4x11 no. = 44.00 nos. x 0.15 =
6.6 mtr. @ 0.628 kg/mtr. = 4.14 kg
(ii) 75mm long 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.628 kg/mtr.= 3.10 kg.
Total=4.14 + 3.10 = 7.24 kg
7216 Self-Drilling/Self-Tapping Screws M-6 25mm long each 284.0000
(a) Bracket to vertical profile - 32 Nos. (brackets) x2.00 nos. =
64.00 Nos
b) For fixing of C” clamps to vertical profile
(44+66=110)x2=220 nos.
Total = 220 Nos + 64 Nos = 284.00 Nos
1007 HDG Mild Steel Brackets (Minimum 18 microns Galvanizing) quintal 0.6034
a) Wall bracket = 110x80x6 mm thick

(i) 100 mm long = 12x0.10= 1.20 m @ 8.65 kg/m. = 10.38 kg
(ii) 175mm long = 12x0.175=2.10 m. @ 8.65 kg/m. = 18.17 kg
Total = 10.38 + 18.17 = 28.55 kg

b) Corner Bracket of size 200 x 100 x 12mm thick
(i) 100mm long - 4 Nos x0.10x = 0.40 m @ 28.90 Kg =11.56 Kg
(ii) 175mm long 4x0.175= 0.70 m. @ 28.90 kg/m. =20.23 kg
Total = 11.56 + 20.23 = 31.79 kg.

Total quantity of wall and corner bracket =
28.55 + 31.79 = 60.34 kg = 0.6034 quintal
7217 SS anchor Fasteners (RCC / Brick) - M-8x75mm/M- 10x100mm each 32.0000
8x4 nos. = 32 Nos Bracket

7390 EPDM Gaskets of size 100x80 mm metre 3.2000
32x0.10=3.20 mtr.
7218 MS Polymer Sealant Adhesive litre 0.1500
Area = 10.8 Sqm + wastage @ 0.54 sqm. = 11.34 Sqm
Adhesive required = Approx. 150ml or 0.15 Ltr.
SS Clips
7219 SS Double Clip at intermediate each 140.0000
7x10=70.00 Nos. x 2 clips = 140.00 clips
7220 SS Single clip at top and bottom each 28.0000
7x4= 28 Nos. clips
LABOUR
166 Installation charges for fixing of façade at all heights with sqm 10.8000
extruded hollow clay/terracotta ventillated rain screen tiles

9999 T&P and materials Lead & Lift L.S. 250.0000
TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.80 sqm.
Cost of 1 sqm
Say
26.92.2 With 16mm thickness (+/- 10%) terracotta tiles of other than
grey colours
Detail of cost for 10.80 sqm (3.60 x 3.0 metre)
MATERIAL
Total = 11.34 sqm
5762 16mm thick extruded terracotta tiles sqm 11.3400
of other than grey colour of size 300 x 595mm
(Total = 4.92+3.18+9.00 = 17.10 kg.
7306 Aluminium “C” Clamps of size 80x25x2 mm - 150mm kgs 7.2400
(i) 150mm long = 4x11 no. = 44.00 nos. x 0.15 =
6.6 mtr. @ 0.628 kg/mtr. = 4.14 kg
(ii) 75mm long 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.628 kg/mtr.= 3.10 kg.
Total=4.14 + 3.10 = 7.24 kg
7216 Self-Drilling/Self-Tapping Screws M-6 25mm long each 284.0000
(a) Bracket to vertical profile - 32 Nos. (brackets) x2.00 nos. =
64.00 Nos
b) For fixing of C” clamps to vertical profile
(44+66=110)x2=220 nos.
Total = 220 Nos + 64 Nos = 284.00 Nos
1007 HDG Mild Steel Brackets (Minimum 18 microns Galvanizing) quintal 0.6034
a) Wall bracket = 110x80x6 mm thick

(i) 100 mm long = 12x0.10= 1.20 m @ 8.65 kg/m. = 10.38 kg
(ii) 175mm long = 12x0.175=2.10 m. @ 8.65 kg/m. = 18.17 kg
Total = 10.38 + 18.17 = 28.55 kg

(i) 100mm long - 4 Nos x0.10x = 0.40 m @ 28.90 Kg =11.56 Kg
(ii) 175mm long 4x0.175= 0.70 m. @ 28.90 kg/m. =20.23 kg
Total = 11.56 + 20.23 = 31.79 kg.

Total quantity of wall and corner bracket =
28.55 + 31.79 = 60.34 kg = 0.6034 quintal
7217 SS anchor Fasteners (RCC / Brick) - M-8x75mm/M- 10x100mm each 32.0000

32x0.10=3.20 mtr.
Area = 10.8 Sqm + wastage @ 0.54 sqm. = 11.34 Sqm
Adhesive required = Approx. 150ml or 0.15 Ltr.
SS Clips
7219 SS Double Clip at intermediate each 140.0000
7x10=70.00 Nos. x 2 clips = 140.00 clips
7220 SS Single clip at top and bottom each 28.0000
7x4= 28 Nos. clips
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 10.80 sqm.
Cost of 1 sqm
Say
26.93 Providing and fixing of façade at all heights with extruded
hollow Clay / Terracotta ventilated rainscreen tiles of height
259/ 309/ 409mm and length of 1190 mm of approved
texture, design and pattern having Flexural Strength/ Modulus
of Rupture of ≥ 14 N/m² and maximum water absorption of
10% tested as per ISO 10545-4:2004(E) and ISO 10545-3:1995
respectively in true level fixed to a supporting aluminium
framework (Alloy 6063 T5/T6) consisting of vertical 'T' (for
intermediates)/ 'L' (for ends/ termination)/ Tubular sections
(at corners)of size 80x60x2mm/ 40x60x2mm/ 40x40x2mm
respectively, spaced at maximum spacing of 1200mm c/c
matching to the tile vertical grid, and horizontal aluminium
'C'-clamps of size 56x34x2 mm thickness of length 150mm at
junction of tiles and of length 75mm at wall ends/ corners
fixed on top of the vertical sections at spacing of 250/ 300/
400mm c/c matching to the tile horizontal grid with two
numbers of self-drilling / self-tapping SS screws of size 5.5x25
mm with EPDM washers.
The vertical 'T'/'L/ Tubular' sections shall be fixed to the wall

using HDG (hot-dip-galvanized) steel L-brackets (galvanizing
thickness of minimum 80 microns) of size 110x80x6 mm at
intermediate vertical aluminium profiles and of size
220x110x12 mm at outer corners and stainless steel grade
304,M10 full threaded anchor fasteners with nylon sleeve
100mm long (for brick work) and M8 expansion anchor
fasteners 75mm long for concrete surface, spacing of brackets
to be based on a structural/ static calculation. The brackets
shall be of length 175mm at junction of two vertical
aluminium profiles and of length 100mm at intermediate
points of vertical profiles and shall be fixed to the vertical
aluminium T / L / Tubular profiles using two numbers self-
drilling/ self-tapping SS screws of size 5.5x25 mm with EPDM
washers.
EPDM gaskets to be fixed in between brackets and vertical
profiles. The tiles shall be mounted on the ‘C’ clamps such
that the tiles are supported at top and bottom at both ends.
The tiles shall be mounted on the C-clamps with EPDM
profiles in between such that the tiles are supported at top
and bottom at both ends. The vertical joint open groove
between two adjacent tiles shall be 10mm. The tiles and
system shall be designed to resist wind load as per IS 875
(Part 3) according to different zones. The tiles shall be
installed using the ventilated rain screen principle with
provision for natural ventilation of the space between the
façade tiles and the structural wall. The work shall be carried
out as per specification, drawing and as per direction of the
Engineer-in-Charge. Note : Scaffolding wherever required to
be paid separately.
26.93.1 With 24mm thickness (+/- 10%) terracotta tiles of grey colour

Detail of cost for 12.60 sqm (4.2 (0.3+3.6+0.3) x 3.0
metre)
MATERIAL
Total = 13.23 sqm
5764 24mm thick extruded terracotta tiles of grey colour sqm 13.2300
of size 309x1190 mm and length 1190mm
(Total = 4.92+3.18+4.50 = 12.60 kg
7306 Aluminium C Clamps of size 56x34x2.0 mm kgs 5.0700
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =
3.3 mtr. @ 0.615 kg/mtr. = 2.03 kg
(ii) 75mm long - 6x11=66.00 nos. x 0.075 =
4.95 mtr. @ 0.615 kg/mtr.= 3.04 kg
Total=2.03 + 3.04 = 5.07 kg
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long each 236.0000
(a) Bracket to vertical profile - 30 Nos.x2.00 nos. = 60.00 Nos
b) For fixing of brackets to “C” clamps (22+66=88)x2=176 Nos
Total = 176 Nos + 60 = 236.00 Nos

1007 HDG Mild Steel Brackets 80 microns quintal 0.6358
(Minimum Galvanizing)
a) Wall bracket - 110 x 80x6mm thick
(i) 100 mm long = 10x0.10= 1.00 Mtr @ 8.65 kg/mtr. =
8.65 kg
(ii)175mm long = 10x0.175=1.75 mtr. @ 8.65 kg/mtr. =
15.13 kg
Total = 8.65 + 15.13 = 23.85 kg
(i) 100mm long - 5 Nos x0.10 = 0.50 mtr. @ 28.90 kg/mtr.==
14.45 Kg
(ii) 175mm long - 5x0.175= 0.875 mtr. @ 28.90 kg/mtr. =25.28
kg
Total = 14.45 + 25.28 = 39.73 kg
Gross total = 23.85+39.73 = 63.58 kg = 0.6358 quintal
7222 SS anchor Fasteners (RCC / Brick) - M-8x100 mm each 30.0000
30x0.10=3.00 mtr.
Area = 12.60 Sqm + 5% = 13.23 Sqm
Adhesive required = 175 ml. or 0.175 ltr.
7390 EPDM gasket for tiles mounting on C - clamps metre 8.2500
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =3.3 mtr.
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr.
Total = 3.3 + 4.95 = 8.25 mtr.
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 12.60 sqm.
Cost of 1 sqm
Say
26.93.2 With 24mm thickness (+/- 10%) terracotta tiles of other than
grey colours
Detail of cost for 12.60 sqm (4.2 (0.3+3.6+0.3) x 3.0
metre)
MATERIAL
Total = 13.23 sqm
5765 24mm thick extruded terracotta tiles of other than grey colour sqm 13.2300
of size 309x1190 mm and length 1190mm

(Total = 4.92+3.18+4.50 = 12.60 kg
7306 Aluminium C Clamps of size 56x34x2.0 mm kgs 5.0700
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =
3.3 mtr. @ 0.615 kg/mtr. = 2.03 kg
(ii) 75mm long - 6x11=66.00 nos. x 0.075 =
4.95 mtr. @ 0.615 kg/mtr.= 3.04 kg
Total=2.03 + 3.04 = 5.07 kg
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long each 236.0000
(a) Bracket to vertical profile - 30 Nos.x2.00 nos. = 60.00 Nos
b) For fixing of brackets to “C” clamps (22+66=88)x2=176 Nos
Total = 176 Nos + 60 = 236.00 Nos

1007 HDG Mild Steel Brackets 80 microns quintal 0.6358
(Minimum Galvanizing)
a) Wall bracket - 110 x 80x6mm thick
(i) 100 mm long = 10x0.10= 1.00 Mtr @ 8.65 kg/mtr. =
8.65 kg
(ii)175mm long = 10x0.175=1.75 mtr. @ 8.65 kg/mtr. =
15.13 kg
Total = 8.65 + 15.13 = 23.85 kg
(i) 100mm long - 5 Nos x0.10 = 0.50 mtr. @ 28.90 kg/mtr. =
14.45 Kg
(ii) 175mm long - 5x0.175= 0.875 mtr. @ 28.90 kg/mtr. =
25.28 kg
Total = 14.45 + 25.28 = 39.73 kg
Gross total = 23.85+39.73 = 63.58 kg = 0.6358 quintal
7222 SS anchor Fasteners (RCC / Brick) - M-8x100 mm each 30.0000
30x0.10=3.00 mtr.
Area = 12.60 Sqm + 5% = 13.23 Sqm
Adhesive required = 175 ml. or 0.175 ltr.
7390 EPDM gasket for tiles mounting on C - clamps metre 8.2500
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =3.3 mtr.
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr.
Total = 3.3 + 4.95 = 8.25 mtr.
LABOUR

TOTAL
TOTAL
TOTAL
Add 15% CPOH on "Y"
TOTAL
Cost of 12.60 sqm.
Cost of 1 sqm
Say
Rate Amount
645.00 4386.00
645.00 3612.00
7998.00 W
79.98
8077.98 X
1134.96
9212.94 Y
1381.94
10594.88 Z
105.95
10700.83
107.01
107.00
Rate Amount
645.00 3805.50
645.00 2322.00
714.00 285.60
645.00 5.16
3000.00 24.00
2.12 5.79
6448.05 W
64.48
6512.53 X
915.01
7427.54 Y
1114.13
8541.67 Z
85.42
8627.09
862.71
862.70
Rate Amount
645.00 1419.00
645.00 2322.00
714.00 285.60
3000.00 24.00
645.00 5.16
2.12 5.79
4061.55 W
40.62
4102.16 X
576.35
4678.52 Y
701.78
5380.29 Z
53.80
5434.10
543.41
543.40
Rate Amount
645.00 5.16
3000.00 24.00
2.12 3.86
33.02 W
0.33
33.35 X
4.69
38.03 Y
5.71
43.74 Z
0.44
44.18
4.42
4.40
Rate Amount
714.00 285.00
285.60 W
2.86
288.46 X
40.53
328.98 Y
49.35
378.33 Z
3.78
382.11
38.21
38.20
Rate Amount
7000.00 287.00
6000.00 246.00
714.00 228.48
645.00 774.00
1535.48 W
15.35
1550.83 X
217.89
1768.73 Y
265.31
2034.04 Z
20.34
2054.38
205.44
205.45
Rate Amount
7000.00 441.00
3750.00 236.25
645.00 454.73
645.00 1025.55
645.00 228.98
645.00 322.50
645.00 354.75
2.12 22.87
3086.62 W
30.87
3117.49 X
438.01
3555.50 Y
533.32
4088.82 Z
40.89
4129.71
412.97
412.95
Rate Amount
7000.00 875.00
3750.00 468.75
645.00 683.70
645.00 1822.13
645.00 570.83
645.00 290.25
645.00 354.75
40.00 157.20
15.00 60.00
2.12 34.17
5316.77 W
53.17
5369.94 X
754.48
6124.42 Y
918.66
7043.08 Z
70.43
7113.51
711.35
711.35
Rate Amount
7000.00 875.00
3750.00 468.75
645.00 1593.15
645.00 3870.00
714.00 756.84
714.00 124.95
645.00 483.75
645.00 645.00
2.12 34.17
8851.61 W
88.52
8940.13 X
1256.09
10196.22 Y
1529.43
11725.65 Z
117.26
11842.91
1184.29
1184.30
Rate Amount
7000.00 288.75
6000.00 247.50
714.00 285.60
645.00 1322.25
2144.10 W
21.44
2165.54 X
304.26
2469.80 Y
370.47
2840.27 Z
28.40
2868.67
286.87
286.85
Rate Amount
7000.00 437.50
3750.00 234.38
645.00 570.83
645.00 1138.43
645.00 341.85
645.00 322.50
645.00 838.50
2.12 28.66
3912.64 W
39.13
3951.76 X
555.22
4506.99 Y
676.05
5183.03 Z
51.83
5234.86
523.49
523.50
Rate Amount
7000.00 875.00
3750.00 468.75
645.00 799.80
645.00 1935.00
645.00 683.70
645.00 322.50
645.00 838.50
40.00 256.80
15.00 105.00
2.12 39.96
6325.01 W
63.25
6388.26 X
897.55
7285.81 Y
1092.87
8378.68 Z
83.79
8462.47
846.25
846.25
Rate Amount
7000.00 875.00
3750.00 468.75
645.00 1709.25
645.00 3982.88
714.00 756.84
714.00 124.95
645.00 483.75
645.00 967.50
2.12 38.03
9406.95 W
94.07
9501.02 X
1334.89
10835.91 Y
1625.39
12461.30 Z
124.61
12585.91
1258.59
1258.60
Rate Amount
286.85 24396.59
253.95 21598.45
45995.04
45995.04
255.53
255.55
Rate Amount
286.85 24350.70
253.95 21557.82
45908.51
45908.51
417.35
417.35
Rate Amount
286.85 20736.39
253.95 18358.05
39094.43
39094.43
651.57
651.55
Rate Amount
286.85 103911.41
253.95 91993.39
205.45 32872.00
253.95 40632.00
104.50 14812.88
284221.68 P
417.35 -125205.00 Q
159016.68 Z
530.06
127.01
127.00
Rate Amount
286.85 36143.10
253.95 31997.70
205.45 41090.00
253.95 50790.00
104.50 13167.00
173187.80 P
417.35 -41735.00 Q
131452.80 Z
1314.53
314.97
314.95
Rate Amount
523.50
523.50 44523.68 A
253.95 21598.45 A
645.00 1290.00
67412.12 W
12.90
67425.02 X
183.06
67608.08 Y
222.89
67830.97 Z
17.09
67848.06
376.93
376.95
Rate Amount
523.50 48999.60 A
253.95 23769.72 A
645.00 1419.00
74188.32 W
14.19
74202.51 X
201.36
74403.87 Y
245.18
74649.06 Z
18.80
74667.85
933.35
933.35
Rate Amount
523.50 21148.88 A
253.95 10259.33 A
645.00 606.30
32014.50 W
6.06
32020.57 X
86.04
32106.60 Y
104.76
32211.36 Z
8.03
32219.39
1073.98
1074.00
Rate Amount
846.25 71973.56 A
253.95 21598.45 A
645.00 1612.50
95184.51 W
16.13
95200.64 X
228.82
95429.46 Y
278.62
95708.07 Z
21.36
95729.43
531.83
531.85
Rate Amount
846.25 79209.00 A
253.95 23769.72 A
645.00 1773.75
104752.47 W
17.74
104770.21 X
251.70
105021.91 Y
306.48
105328.39 Z
23.50
105351.89
1316.90
1316.90
Rate Amount
846.25 34187.65 A
253.95 10259.33 A
645.00 754.65
45201.63 W
7.55
45209.18 X
107.09
45316.26 Y
130.39
45446.66 Z
10.00
45456.65
1515.22
1515.20
Rate Amount
1258.60 107043.93 A
253.95 21598.45 A
645.00 1612.50
130254.88 W
16.12
130271.00 X
228.82
130499.82 Y
278.62
130778.44 Z
21.36
130799.80
726.67
726.65
Rate Amount
1258.60 117804.96
1258.60 117804.96 A
253.95 23769.72 A
645.00 1773.75
143348.43 W
17.74
143366.17 X
251.70
143617.87 Y
306.48
143924.35 Z
23.50
143947.85
1799.35
1799.35
Rate Amount
1258.60 50846.18 A
253.95 10259.33 A
645.00 754.65
61860.16 W
7.55
61867.70 X
107.09
61974.79 Y
130.39
62105.19 Z
10.00
62115.18
2070.51
2070.50
Rate Amount
846.25 437934.38 A
711.35 135156.50 A
253.95 179669.63 A
187.40 37948.50 A
645.00 10642.50
801351.50 W
106.43
801457.93 X
1510.22
802968.15 Y
1838.87
804807.02 Z
140.98
804948.00
1316.90 -395070.00
409878.00
1366.26
103.75
103.75
Rate Amount
846.25 152325.00 A
711.35 168945.63 A
187.40 33732.00 A
253.95 106024.13 A
645.00 5966.25
466993.00 W
59.66
467052.66 X
846.64
467899.30 Y
1030.88
468930.19 Z
79.03
469009.22
1316.90 -131690.00
337319.22
3373.19
256.15
256.15
Rate Amount
260.00 5557.50
260.00 1950.00
40.00 127.50
187.35 245.90
714.00 357.00
645.00 645.00
2.12 57.05
8939.95 W
89.40
9029.35 X
1268.62
10297.97 Y
1544.70
11842.66 Z
118.43
11961.09
132.90
132.90
Rate Amount
260.00 5557.50
260.00 1950.00
40.00 127.50
187.35 245.90
714.00 535.50
645.00 1290.00
2.12 85.71
9792.11 W
97.92
9890.03 X
1389.55
11279.58 Y
1691.94
12971.52 Z
129.72
13101.23
145.57
145.55
Rate Amount
260.00 5557.50
260.00 1950.00
40.00 127.50
187.35 245.90
714.00 1071.00
645.00 2580.00
2.12 171.15
11703.04 W
117.03
11820.07 X
1660.72
13480.80 Y
2022.12
15502.91 Z
155.03
15657.94
173.98
174.00
Rate Amount
260.00 407.88
260.00 133.25
40.00 16.47
187.35 19.39
714.00 42.84
645.00 77.40
2.12 5.79
703.02 W
7.03
710.05 X
99.76
809.81 Y
121.47
931.28 Z
9.31
940.59
142.51
142.50
Rate Amount
260.00 407.88
260.00 133.25
40.00 16.47
187.35 19.39
714.00 85.68
645.00 161.25
2.12 11.58
835.49 W
8.35
843.85 X
118.56
962.41 Y
144.36
1106.77 Z
11.07
1117.84
169.37
169.35
Rate Amount
260.00 407.88
260.00 133.25
40.00 16.47
187.35 19.39
714.00 135.66
645.00 245.10
2.12 17.09
974.83 W
9.75
984.58 X
138.33
1122.92 Y
168.44
1291.35 Z
12.91
1304.27
197.62
197.60
Rate Amount
260.00 2778.75
260.00 487.50
40.00 63.60
187.35 108.85
714.00 178.50
645.00 322.50
2.12 66.70
4006.40 W
40.06
4046.46 X
568.53
4614.99 Y
692.25
5307.24 Z
53.07
5360.31
119.12
119.10
Rate Amount
260.00 2778.75
260.00 487.50
40.00 63.60
187.35 108.85
714.00 357.00
645.00 645.00
2.12 72.21
4512.91 W
45.13
4558.04 X
640.40
5198.44 Y
779.77
5978.21 Z
59.78
6037.99
134.18
134.20
Rate Amount
260.00 2778.75
260.00 487.50
40.00 63.60
187.35 108.85
714.00 535.50
645.00 967.50
2.12 100.87
5042.57 W
50.43
5093.00 X
715.57
5808.56 Y
871.28
6679.85 Z
66.80
6746.64
149.93
149.95
Rate Amount
260.00 77805.00
260.00 27300.00
40.00 1785.20
187.35 501.16
107391.36 W
1073.91
108465.27 X
15239.37
123704.65 Y
18555.70
142260.34 Z
1422.60
143682.95
1596.48
1596.50
Rate Amount
260.00 1852.50
260.00 1950.00
40.00 127.20
187.35 138.64
714.00 178.50
645.00 322.50
2.12 41.89
4611.23 W
46.11
4657.34 X
654.36
5311.70 Y
796.75
6108.45 Z
61.08
6169.54
68.55
68.55
Rate Amount
260.00 1852.50
260.00 1950.00
40.00 127.20
187.35 138.64
714.00 357.00
714.00 357.00
645.00 645.00
2.12 70.28
5140.62 W
51.41
5192.02 X
729.48
5921.50 Y
888.23
6809.73 Z
68.10
6877.83
76.42
76.40
Rate Amount
260.00 1852.50
260.00 1950.00
40.00 127.20
187.35 138.64
714.00 714.00
645.00 1128.75
2.12 98.94
6010.03 W
60.10
6070.13 X
852.85
6922.98 Y
1038.45
7961.43 Z
79.61
8041.04
89.34
89.35
Rate Amount
260.00 139.75
260.00 78.00
40.00 16.00
187.35 9.93
714.00 21.42
645.00 38.70
2.12 3.86
307.66 W
3.08
310.74 X
43.66
354.40 Y
53.16
407.56 Z
4.08
411.64
62.37
62.35
Rate Amount
260.00 139.75
260.00 78.00
40.00 16.00
187.35 9.93
714.00 42.84
645.00 77.40
2.12 5.79
369.71 W
3.70
373.40 X
52.46
425.87 Y
63.88
489.75 Z
4.90
494.65
74.95
74.95
Rate Amount
260.00 139.75
260.00 78.00
40.00 16.00
187.35 9.93
714.00 71.40
645.00 129.00
2.12 7.72
451.80 W
4.52
456.32 X
64.11
520.43 Y
78.06
598.49 Z
5.98
604.47
91.59
91.60
Rate Amount
260.00 926.25
40.00 150.00
187.35 61.36
714.00 85.68
645.00 161.25
2.12 41.89
1426.43 W
14.26
1440.69 X
202.42
1643.11 Y
246.47
1889.58 Z
18.90
1908.48
42.41
42.40
Rate Amount
260.00 926.25
40.00 150.00
187.35 61.36
714.00 178.50
645.00 322.50
2.12 70.28
1708.89 W
17.09
1725.98 X
242.50
1968.48 Y
295.27
2263.75 Z
22.64
2286.39
50.81
50.80
Rate Amount
260.00 926.25
40.00 150.00
187.35 61.36
714.00 357.00
645.00 567.60
2.12 100.87
2163.08 W
21.63
2184.71 X
306.95
2491.66 Y
373.75
2865.41 Z
28.65
2894.06
64.31
64.30
Rate Amount
260.00 25935.00
260.00 27300.00
40.00 1785.20
187.35 278.21
55298.41 W
552.98
55851.40 X
7847.12
63698.52 Y
9554.78
73253.30 Z
732.53
73985.83
822.06
822.05
Rate Amount
20.00%
0.20
20.00%
Rate Amount
25.00%
0.25
25.00%
Rate Amount
714.00 142.80
645.00 1612.50
714.00 142.80
1898.10
18.98
1917.08
269.35
2186.43
327.96
2514.40
25.14
2539.54
253.95
253.95
Rate Amount
205.45 2054.50 A
234.05 -2340.50 A
645.00 290.25
714.00 249.90
271.45 2714.50 A
40.00 400.00
3368.65 W
9.40
3378.05 X
133.41
3511.46 Y
162.44
3673.91 Z
12.45
3686.36
368.64
368.65
Rate Amount
714.00 71.40
645.00 709.50
780.90 W
7.81
788.71 X
110.81
899.52 Y
134.93
1034.45 Z
10.34
1044.80
104.48
104.50
Rate Amount
714.00 142.80
645.00 1257.75
1400.55 W
14.01
1414.56 X
198.75
1613.30 Y
242.00
1855.30 Z
18.55
1873.85
187.38
187.40
Rate Amount
1300.00 13000.00
163.93 1639.30
645.00 574.05
645.00 690.15
714.00 249.90
16153.40 W
161.53
16314.93 X
2292.25
18607.18 Y
2791.08
21398.26 Z
213.98
21612.24
2161.22
2161.20
Rate Amount
645.00 1270.65
645.00 832.05
2102.70 W
21.03
2123.73 X
298.38
2422.11 Y
363.32
2785.43 Z
27.85
2813.28
28.13
28.15
Rate Amount
645.00 1773.75
714.00 357.00
2130.75 W
21.31
2152.06 X
302.36
2454.42 Y
368.16
2822.58 Z
28.23
2850.81
28.51
28.50
Rate Amount
286.85 860.55 A
2.12 28.66
889.21 W
0.29
889.50 X
4.07
893.57 Y
4.95
898.52 Z
0.38
898.90
89.89
89.90
Rate Amount
523.50 1570.50 A
2.12 28.66
1599.16 W
0.29
1599.45 X
4.07
1603.52 Y
4.95
1608.47 Z
0.38
1608.85
160.88
160.90
Rate Amount
846.25 2538.75 A
2.12 28.66
2567.41 W
0.29
2567.70 X
4.07
2571.77 Y
4.95
2576.72 Z
0.38
2577.10
257.71
257.70
Rate Amount
1258.60 3775.80 A
2.12 28.66
3804.46 W
0.29
3804.75 X
4.07
3808.82 Y
4.95
3813.77 Z
0.38
3814.15
381.41
381.40
Rate Amount
645.00 696.60
645.00 387.00
1083.60 W
10.84
1094.44 X
153.77
1248.20 Y
187.23
1435.43 Z
14.35
1449.79
14.50
14.50
Rate Amount
645.00 387.00
645.00 161.25
2.12 3.86
552.11 W
5.52
557.63 X
78.35
635.98 Y
95.40
731.37 Z
7.31
738.69
7.39
7.40
Rate Amount
645.00 212.85
645.00 109.65
2.12 5.79
328.29 W
3.28
331.57 X
46.62
378.19 Y
56.73
434.92 Z
4.35
439.27
439.25
Rate Amount
645.00 967.50
645.00 483.75
2.12 11.58
1462.83 W
14.63
1477.45 X
207.58
1685.04 Y
252.76
1937.79 Z
19.38
1957.17
1957.15
Rate Amount
645.00 4515.00
645.00 2257.50
2.12 17.09
6789.59 W
67.90
6857.48 X
963.48
7820.96 Y
1173.14
8994.10 Z
89.94
9084.04
9084.05
Rate Amount
645.00 9030.00
645.00 4515.00
2.12 57.05
13602.05 W
136.02
13738.07 X
1930.20
15668.27 Y
2350.24
18018.51 Z
180.19
18198.69
18198.70
Rate Amount
150.00 15000.00
16.39 16.39
15016.39 W
150.16
15166.55 X
2130.90
17297.45 Y
2594.62
19892.07 Z
198.92
20090.99
200.91
200.90
Rate Amount
645.00 212.85
2.12 28.66
241.51 W
2.42
243.93 X
34.27
278.20 Y
41.73
319.93 Z
3.20
323.13
32.31
32.30
Rate Amount
645.00 258.00
2.12 76.07
334.07 W
3.34
337.41 X
47.41
384.81 Y
57.72
442.53 Z
4.43
446.96
44.70
44.70
Rate Amount
645.00 1290.00
714.00 357.00
2.12 76.07
1723.07 W
17.23
1740.30 X
244.51
1984.81 Y
297.72
2282.53 Z
22.83
2305.35
256.15
256.15
Rate Amount
645.00 193.50
714.00 35.70
2.12 38.03
267.23 W
2.67
269.91 X
37.92
307.83 Y
46.17
354.00 Z
3.54
357.54
35.75
35.75
Rate Amount
50.00 1615.00
714.00 142.80
645.00 129.00
2.12 38.03
1924.83 W
19.25
1944.08 X
273.14
2217.22 Y
332.58
2549.81 Z
25.50
2575.31
257.53
257.55
Rate Amount
714.00 57.12
645.00 516.00
573.12 W
5.73
578.85 X
81.33
660.18 Y
99.03
759.21 Z
7.59
766.80
76.68
76.70
Rate Amount
11.00 11.00
163.93 163.93
174.93 W
1.75
176.68 X
24.82
201.50 Y
30.23
231.73 Z
2.32
234.05
234.05
Rate Amount
714.00 142.80
645.00 1612.50
714.00 142.80
1898.10 W
18.98
1917.08 X
269.35
2186.43 Y
327.96
2514.40 Z
25.14
2539.54
253.95
253.95
Rate Amount
5000.00 5100.00
145.72 148.63
900.00 641.25
163.93 116.80
645.00 483.75
714.00 49.98
2.12 57.03
2.12 28.66
6626.10
6626.10
Rate Amount
5000.00 3400.00
145.72 99.09
900.00 855.00
163.93 155.73
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5129.26
5129.25
Rate Amount
5000.00 2550.00
145.72 74.32
900.00 963.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
4382.16
4382.15
Rate Amount
5000.00 1900.00
145.72 55.37
900.00 963.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3713.22
3713.20
Rate Amount
5000.00 1550.00
145.72 45.17
900.00 963.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3353.02
3353.00
Rate Amount
5000.00 1250.00
145.72 36.43
900.00 963.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3044.28
3044.30
Rate Amount
5000.00 3400.00
145.72 99.09
1500.00 1425.00
163.93 155.73
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5699.26
5699.25
Rate Amount
5000.00 2550.00
145.72 74.32
1500.00 1605.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5024.17
5024.15
Rate Amount
5000.00 1900.00
145.72 55.37
1500.00 1605.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
4355.22
4355.20
Rate Amount
5000.00 1550.00
145.72 45.17
1500.00 1605.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3995.02
3995.00
Rate Amount
5000.00 1250.00
145.72 36.43
1500.00 1605.00
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3686.28
3686.30
Rate Amount
5000.00 3400.00
145.72 99.09
1100.00 1045.00
163.93 155.73
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5319.26
5319.25
Rate Amount
5000.00 3400.00
145.72 99.09
1130.00 1073.50
163.93 155.73
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5347.76
5347.75
Rate Amount
5000.00 1550.00
145.72 45.17
1130.00 1209.10
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
3599.12
3599.10
Rate Amount
11200.00 7616.00
145.72 99.09
1130.00 1073.50
163.93 155.73
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
9563.76
9563.75
Rate Amount
11200.00 5712.00
145.72 74.32
1130.00 1209.10
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
7790.26
7790.25
Rate Amount
11200.00 3472.00
145.72 45.17
1130.00 1209.10
163.93 175.41
645.00 483.75
714.00 49.98
2.12 57.05
2.12 28.66
5521.12
5521.10
Rate Amount
165.00 178.20
645.00 406.35
714.00 224.91
2.12 13.67
823.13
823.15
Rate Amount
700.00 498.75
300.00 903.00
1130.00 271.20
163.93 39.34
163.93 493.43
645.00 580.50
714.00 321.30
2.12 21.94
2.12 11.02
3140.49
3140.50
Rate Amount
1400.00 798.00
1350.00 378.00
163.93 139.34
1500.00 637.50
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
5817.66 W
58.18
5875.84 X
825.56
6701.40 Y
1005.21
7706.61 Z
77.07
7783.67
7783.65
Rate Amount
1400.00 599.20
957.00 135.89
1350.00 283.50
957.00 66.99
163.93 139.34
1500.00 478.50
741.00 78.55
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
5646.79 W
56.47
5703.26 X
801.31
6504.57 Y
975.69
7480.26 Z
74.80
7555.06
7555.05
Rate Amount
1400.00 938.00
1350.00 297.00
163.93 145.90
1500.00 667.50
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
5504.84 W
55.05
5559.89 X
781.16
6341.06 Y
951.16
7292.21 Z
72.92
7365.14
7365.15
Rate Amount
1400.00 704.20
957.00 159.82
1350.00 222.75
957.00 52.64
163.93 145.90
1500.00 501.00
741.00 82.25
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
5325.00 W
53.25
5378.25 X
755.64
6133.89 Y
920.08
7053.98 Z
70.54
7124.52
7124.50
Rate Amount
1300.00 676.00
1400.00 308.00
1350.00 148.50
178.19 92.66
163.93 54.10
1500.00 667.50
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
5401.55 W
54.02
5455.56 X
766.51
6222.07 Y
933.31
7155.38 Z
71.55
7226.93
7226.95
Rate Amount
1400.00 980.00
1350.00 324.00
163.93 154.09
1500.00 705.00
163.93 77.05
5000.00 1100.00
145.72 32.06
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
5107.41 W
51.07
5158.49 X
724.77
5883.25 Y
882.49
6765.74 Z
67.66
6833.40
6833.40
Rate Amount
957.00 669.90
957.00 229.68
163.93 154.09
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
4346.26 W
43.46
4389.72 X
616.76
5006.48 Y
750.97
5757.45 Z
57.57
5815.03
5815.05
Rate Amount
398.00 278.60
430.00 103.20
163.93 154.09
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
3828.48 W
38.28
3866.77 X
543.28
4410.05 Y
661.51
5071.55 Z
50.72
5122.27
5122.25
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1100.00
145.72 32.06
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
4985.48 W
49.85
5035.34 X
707.47
5742.80 Y
861.42
6604.23 Z
66.04
6670.27
6670.25
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
3781.82 W
37.82
3819.64 X
536.66
4356.30 Y
653.45
5009.75 Z
50.10
5059.85
5059.85
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 850.00
145.72 24.77
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
4728.20 W
47.28
4775.48 X
670.96
5446.44 Y
816.97
6263.40 Z
62.63
6326.03
6326.05
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 348.27
163.93 77.05
5000.00 850.00
145.72 24.77
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
3524.54 W
35.25
3559.78 X
500.15
4059.93 Y
608.99
4668.92 Z
46.69
4715.61
4715.60
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 650.00
145.72 18.94
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
4522.37 W
45.22
4567.59 X
641.75
5209.34 Y
781.40
5990.74 Z
59.91
6050.65
6050.65
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 348.27
163.93 77.05
5000.00 650.00
145.72 18.94
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 28.66
3318.71 W
33.19
3351.90 X
470.94
3822.84 Y
573.43
4396.26 Z
43.96
4440.23
4440.25
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
900.00 423.00
163.93 77.05
5000.00 650.00
145.72 18.94
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 19.02
4230.72 W
42.31
4273.03 X
600.36
4873.39 Y
731.01
5604.40 Z
56.04
5660.44
5660.45
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 555.00
163.93 60.65
11.00 2.31
163.93 34.43
5000.00 850.00
145.72 24.77
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
4600.19 W
46.00
4646.20 X
652.79
5298.99 Y
794.85
6093.84 Z
60.94
6154.77
6154.75
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 274.17
163.93 60.65
11.00 2.31
163.93 34.43
5000.00 850.00
145.72 24.77
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
3472.43 W
34.72
3507.16 X
492.76
3999.91 Y
599.99
4599.90 Z
46.00
4645.90
4645.90
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 510.00
163.93 55.74
11.00 2.31
163.93 34.43
5000.00 650.00
145.72 18.94
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
4344.45 W
43.44
4387.89 X
616.50
5004.39 Y
750.66
5755.05 Z
57.55
5812.60
5812.60
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 251.94
163.93 55.74
11.00 2.31
163.93 34.43
5000.00 650.00
145.72 18.94
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
3239.46 W
32.39
3271.85 X
459.70
3731.55 Y
559.73
4291.28 Z
42.91
4334.19
4334.20
Rate Amount
1400.00 798.00
1350.00 378.00
163.93 139.34
1500.00 637.50
163.93 69.67
5000.00 2000.00
145.72 58.29
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
7320.02 W
73.20
7393.22 X
1038.75
8431.97 Y
1264.80
9696.77 Z
96.97
9793.73
9793.75
Rate Amount
1400.00 599.20
957.00 135.89
1350.00 283.50
957.00 66.99
163.93 139.34
1500.00 478.50
741.00 78.55
163.93 69.67
5000.00 2000.00
145.72 58.29
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
7149.15 W
71.49
7220.64 X
1014.50
8235.14 Y
1235.27
9470.42 Z
94.70
9565.12
9565.10
Rate Amount
1400.00 938.00
1350.00 297.00
163.93 145.90
1500.00 667.50
163.93 72.95
5000.00 1600.00
145.72 46.63
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
7007.20 W
70.07
7077.27 X
994.36
8071.63 Y
1210.74
9282.37 Z
92.82
9375.20
9375.20
Rate Amount
1400.00 704.20
957.00 159.82
1350.00 222.75
957.00 52.64
163.93 145.90
1500.00 501.00
741.00 82.25
163.93 69.67
5000.00 1600.00
145.72 46.63
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
6824.08 W
68.24
6892.32 X
968.37
7860.69 Y
1179.10
9039.79 Z
90.40
9130.19
9130.20
Rate Amount
1400.00 980.00
1350.00 324.00
163.93 154.09
1500.00 705.00
163.93 77.05
5000.00 1100.00
145.72 32.06
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 28.66
645.00 1212.60
6609.77 W
66.10
6675.87 X
937.96
7613.83 Y
1142.07
8755.90 Z
87.56
8843.46
8843.45
Rate Amount
957.00 669.90
957.00 229.68
163.93 154.09
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 28.66
645.00 1212.60
5848.62 W
58.49
5907.11 X
829.95
6737.05 Y
1010.56
7747.61 Z
77.48
7825.09
7825.10
Rate Amount
398.00 278.60
430.00 103.20
163.93 154.09
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 28.66
645.00 1212.60
5330.84 W
53.31
5384.15 X
756.47
6140.62 Y
921.09
7061.71 Z
70.62
7132.33
7132.35
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 650.00
145.72 18.94
645.00 580.50
645.00 503.10
714.00 499.80
784.00 78.40
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
6014.90 W
60.15
6075.05 X
853.54
6928.59 Y
1039.29
7967.88 Z
79.68
8047.56
8047.55
Rate Amount
367.00 238.55
398.00 95.52
178.19 115.82
163.93 39.34
741.00 348.27
163.93 77.05
5000.00 650.00
145.72 18.94
645.00 580.50
645.00 503.10
714.00 499.80
784.00 78.40
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
4811.24 W
48.11
4859.35 X
682.74
5542.09 Y
831.31
6373.41 Z
63.73
6437.14
6437.15
Rate Amount
860.00 292.40
240.00 20.40
910.00 154.70
76.00 25.84
59.00 10.03
215.00 49.34
2.12 46.85
2.12 165.36
784.00 588.00
645.00 967.50
2.12 110.24
2.12 55.12
2485.78 W
24.86
2510.64 X
352.75
2863.39 Y
429.51
3292.90 Z
32.93
3325.82
307.95
307.95
Rate Amount
860.00 438.60
910.00 154.70
76.00 38.76
59.00 15.05
215.00 146.20
2.12 58.55
2.12 165.36
784.00 2744.00
645.00 3870.00
2.12 165.36
2.12 110.24
7906.82 W
79.07
7985.89 X
1122.02
9107.90 Y
1366.19
10474.09 Z
104.74
10578.83
669.55
669.55
Rate Amount
860.00 146.20
255.00 21.68
965.00 102.58
635.00 53.98
2.12 58.55
2.12 110.24
784.00 784.00
645.00 1290.00
2.12 82.68
2.12 55.12
2705.02 W
27.05
2732.07 X
383.86
3115.93 Y
467.39
3583.32 Z
35.83
3619.15
804.26
804.25
Rate Amount
7783.65 46701.90
46701.90
7783.65
7783.65
Rate Amount
7555.05 45330.30
45330.30
7555.05
7555.05
Rate Amount
7783.65 3502.64 A
645.00 328.95
93.05 19.54 A
898.20 89.82 A
7958.65 19.90 A
2.12 76.96
4037.81 W
4.06
4041.86 X
57.60
4099.46 Y
70.13
4169.60 Z
5.38
4174.98
9277.73
9277.75
Rate Amount
7555.05 3399.77 A
645.00 328.95
93.05 19.54 A
898.20 89.82 A
8148.55 20.37 A
2.12 76.96
3935.41 W
4.06
3939.47 X
57.60
3997.07 Y
70.13
4067.20 Z
5.38
4072.58
9050.18
9050.20
Rate Amount
7555.05 7555.05 A
714.00 249.90
645.00 116.10
714.00 35.70
2.12 41.89
7998.64 W
4.44
8003.08 X
62.95
8066.02 Y
76.65
8142.67 Z
5.88
8148.55
8148.55
Rate Amount
7783.65 4670.19 A
93.05 11.86 A
898.20 89.82 A
7958.65 19.90 A
2.12 64.74
4856.52 W
0.65
4857.16 X
9.19
4866.35 Y
11.19
4877.54 Z
0.86
4878.40
8130.66
8130.65
Rate Amount
7555.05 4533.03 A
93.05 11.86 A
898.20 89.82 A
8148.55 20.37 A
2.12 64.74
4719.83 W
0.65
4720.48 X
9.19
4729.67 Y
11.19
4740.85 Z
0.86
4741.71
7902.85
7902.85
Rate Amount
7783.65 4670.19 A
93.05 11.86 A
898.20 89.82 A
7958.65 19.90 A
5024.15 256.23
645.00 438.60
784.00 470.40
645.00 2322.00
8279.00 W
34.87
8313.87 X
494.86
8808.73 Y
602.54
9411.27 Z
46.20
9457.47
15762.45
15762.45
Rate Amount
7555.05 4533.03 A
93.05 11.86 A
898.20 89.82 A
8148.55 20.37 A
5024.15 256.23
645.00 438.60
784.00 470.40
645.00 2322.00
8142.32 W
34.87
8177.19 X
494.86
8672.04 Y
602.54
9274.59 Z
46.20
9320.78
15534.64
15534.65
Rate Amount
7783.65 179.02 A
2.12 57.05
5699.25 11.40
645.00 36.12
784.00 39.20
645.00 193.50
516.29 W
3.37
519.66 X
47.86
567.52 Y
58.28
625.80 Z
4.47
630.27
12605.34
12605.35
Rate Amount
7555.05 173.77 A
2.12 57.05
5699.25 11.40
645.00 36.12
784.00 39.20
645.00 193.50
511.03 W
3.37
514.41 X
47.86
562.27 Y
58.28
620.54 Z
4.47
625.01
12500.19
12500.20
Rate Amount
7945.65 55.62 A
307.95 73.91 A
93.05 342.42 A
286.85 8.61 A
6833.40 205.00 A
253.05 63.26 A
2.12 27.56
776.38 W
0.28
776.66 X
3.91
780.57 Y
4.76
785.33 Z
0.37
785.70
785.70
Rate Amount
7752.70 54.27 A
307.95 73.91 A
93.05 342.42 A
286.85 8.61 A
5815.05 174.45 A
253.05 63.26 A
2.12 27.56
744.48 W
0.28
744.76 X
3.91
748.67 Y
4.76
753.43 Z
0.37
753.79
753.80
Rate Amount
7752.70 54.27 A
307.95 73.91 A
93.05 342.42 A
286.85 8.61 A
5122.25 153.67 A
253.05 63.26 A
2.12 27.56
723.70 W
0.28
723.97 X
3.91
727.88 Y
4.76
732.64 Z
0.37
733.01
733.00
Rate Amount
7365.15 2946.06 A
1400.00 -938.00
1350.00 904.50
784.00 313.60
714.00 285.60
2.12 4.13
3515.89 W
5.70
3521.59 X
80.86
3602.45 Y
98.46
3700.91 Z
7.55
3708.46
370.85
370.85
Rate Amount
7124.50 2849.80 A
1400.00 -704.20
957.00 -159.82
1350.00 679.05
957.00 159.82
784.00 313.60
714.00 285.60
2.12 4.13
3427.98 W
5.78
3433.77 X
82.05
3515.81 Y
99.90
3615.71 Z
7.66
3623.37
362.34
362.35
Rate Amount
7365.15 3682.58 A
784.00 313.60
714.00 285.60
2.12 28.66
4310.44 W
6.28
4316.72 X
89.10
4405.81 Y
108.49
4514.30 Z
8.32
4522.62
452.26
452.25
Rate Amount
7124.50 3562.25 A
784.00 313.60
714.00 285.60
2.12 28.66
4190.11 W
6.28
4196.39 X
89.10
4285.49 Y
108.49
4393.97 Z
8.32
4402.29
440.23
440.25
Rate Amount
35.00 35.00
2.12 7.72
42.72 W
0.43
43.14 X
6.06
49.21 Y
7.38
56.59 Z
0.57
57.15
57.15
Rate Amount
25614.00 435.44
50.00 61.50
440.00 15.40
163.93 2.79
645.00 77.40
645.00 45.15
714.00 142.80
2.12 70.28
850.75 W
8.51
859.26 X
120.73
979.99 Y
147.00
1126.98 Z
11.27
1138.25
113.83
113.85
Rate Amount
645.00 967.50
967.50 W
9.68
977.18 X
137.29
1114.47 Y
167.17
1281.64 Z
12.82
1294.45
1294.45
Rate Amount
700.00 262.50
645.00 2580.00
2842.50 W
28.43
2870.93 X
403.36
3274.29 Y
491.14
3765.43 Z
37.65
3803.09
905.50
905.50
Rate Amount
784.00 15.68
714.00 14.28
645.00 161.25
645.00 96.75
287.96 W
2.88
290.84 X
40.86
331.70 Y
49.76
381.46 Z
3.81
385.27
385.25
Rate Amount
650.00 487.50
178.19 133.64
900.00 54.00
163.93 9.84
645.00 103.20
645.00 70.95
1400.00 490.00
1350.00 162.00
163.93 77.05
1500.00 345.00
163.93 37.70
5000.00 550.00
145.72 16.03
645.00 645.00
784.00 39.20
714.00 235.62
2.12 28.39
2.12 14.33
749.00 202.23
645.00 696.60
645.00 696.60
5094.88 W
50.95
5145.83 X
722.99
5868.81 Y
880.32
6749.14 Z
67.49
6816.63
681.66
681.65
Rate Amount
650.00 487.50
178.19 133.64
900.00 54.00
163.93 9.84
645.00 103.20
645.00 70.95
957.00 334.95
957.00 114.84
163.93 77.05
741.00 170.43
163.93 37.70
5000.00 550.00
145.72 16.03
645.00 645.00
784.00 39.20
714.00 235.62
2.12 28.39
2.12 14.33
749.00 202.23
645.00 696.60
645.00 696.60
4718.10 W
47.18
4765.28 X
669.52
5434.80 Y
815.22
6250.02 Z
62.50
6312.52
631.25
631.25
Rate Amount
650.00 487.50
178.19 133.64
900.00 54.00
163.93 9.84
645.00 103.20
645.00 70.95
398.00 139.30
430.00 51.60
163.93 77.05
741.00 170.43
163.93 37.70
5000.00 550.00
145.72 16.03
645.00 645.00
784.00 39.20
714.00 235.62
2.12 28.39
2.12 14.33
749.00 202.23
645.00 696.60
645.00 696.60
4459.21 W
44.59
4503.80 X
632.78
5136.58 Y
770.49
5907.07 Z
59.07
5966.14
596.61
596.60
Rate Amount
370.00 46.25
46.25 W
0.46
46.71 X
6.56
53.27 Y
7.99
61.26 Z
0.61
61.87
61.87
61.85
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1100.00
145.72 32.06
29.00 31.90
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6004.16 W
60.04
6064.20 X
852.02
6916.22 Y
1037.43
7953.66 Z
79.54
8033.19
8033.20
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1200.00
145.72 34.97
29.00 34.80
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6109.98 W
61.10
6171.08 X
867.04
7038.11 Y
1055.72
8093.83 Z
80.94
8174.77
8174.75
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1350.00
145.72 39.34
29.00 39.15
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6268.70 W
62.69
6331.39 X
889.56
7220.94 Y
1083.14
8304.09 Z
83.04
8387.13
8387.15
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1500.00
145.72 43.72
29.00 43.50
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6427.42 W
64.27
6491.69 X
912.08
7403.78 Y
1110.57
8514.34 Z
85.14
8599.49
8599.50
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1100.00
145.72 32.06
29.00 31.90
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7216.76 W
72.17
7288.93 X
1024.09
8313.02 Y
1246.95
9559.98 Z
95.60
9655.58
9655.60
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1200.00
145.72 34.97
29.00 34.80
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7322.58 W
73.23
7395.80 X
1039.11
8434.91 Y
1265.24
9700.15 Z
97.00
9797.15
9797.15
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1350.00
145.72 39.34
29.00 39.15
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7481.30 W
74.81
7556.11 X
1061.63
8617.74 Y
1292.66
9910.41 Z
99.10
10009.51
10009.50
Rate Amount
1300.00 845.00
1400.00 336.00
178.19 115.82
163.93 39.34
1500.00 705.00
163.93 77.05
5000.00 1500.00
145.72 43.72
29.00 43.50
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7640.02 W
76.40
7716.42 X
1084.16
8800.58 Y
1320.09
10120.66 Z
101.21
10221.87
10221.85
Rate Amount
957.00 851.73
163.93 145.90
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
29.00 31.90
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
5308.89 W
53.09
5361.98 X
753.36
6115.34 Y
917.30
7032.64 Z
70.33
7102.97
7102.95
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1200.00
145.72 34.97
29.00 34.80
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
5978.56 W
59.79
6038.34 X
848.39
6886.73 Y
1033.01
7919.74 Z
79.20
7998.94
7998.95
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1350.00
145.72 39.34
29.00 39.15
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6137.28 W
61.37
6198.65 X
870.91
7069.56 Y
1060.43
8130.00 Z
81.30
8211.30
8211.30
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1500.00
145.72 43.72
29.00 43.50
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6296.00 W
62.96
6358.96 X
893.43
7252.40 Y
1087.86
8340.26 Z
83.40
8423.66
8423.65
Rate Amount
957.00 851.73
163.93 145.90
741.00 348.27
163.93 77.05
5000.00 1100.00
145.72 32.06
29.00 31.90
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
6521.49 W
65.21
6586.71 X
925.43
7512.14 Y
1126.82
8638.96 Z
86.39
8725.35
8725.35
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1200.00
145.72 34.97
29.00 34.80
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7191.16 W
71.91
7263.07 X
1020.46
8283.53 Y
1242.53
9526.06 Z
95.26
9621.32
9621.30
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1350.00
145.72 39.34
29.00 39.15
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7349.88 W
73.50
7423.38 X
1042.98
8466.36 Y
1269.95
9736.32 Z
97.36
9833.68
9833.70
Rate Amount
1400.00 935.20
957.00 212.45
163.93 145.90
1500.00 529.50
741.00 86.70
163.93 77.05
5000.00 1500.00
145.72 43.72
29.00 43.50
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7508.60 W
75.09
7583.69 X
1065.51
8649.20 Y
1297.38
9946.58 Z
99.47
10046.04
10046.05
Rate Amount
1400.00 798.00
1350.00 378.00
163.93 139.34
1500.00 637.50
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 127.33
645.00 1290.00
714.00 642.60
800.00 56.00
350.00 24.50
2.12 30.32
6251.54 W
62.52
6314.06 X
887.13
7201.19 Y
1080.18
8281.36 Z
82.81
8364.18
8364.20
Rate Amount
1400.00 638.40
957.00 109.10
1350.00 302.40
957.00 53.59
163.93 139.34
1500.00 510.00
741.00 62.99
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 127.33
645.00 1290.00
714.00 642.60
800.00 56.00
350.00 24.50
2.12 30.32
6114.52 W
61.15
6175.66 X
867.68
7043.35 Y
1056.50
8099.85 Z
81.00
8180.85
8180.85
Rate Amount
1400.00 938.00
1350.00 297.00
163.93 145.90
1500.00 667.50
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 127.33
645.00 1290.00
714.00 642.60
800.00 56.00
350.00 24.50
2.12 30.32
5938.72 W
59.39
5998.11 X
842.73
6840.84 Y
1026.13
7866.97 Z
78.67
7945.64
7945.65
Rate Amount
1400.00 750.40
957.00 128.24
1350.00 237.60
957.00 42.11
163.93 145.90
1500.00 534.00
741.00 65.95
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 127.33
645.00 1290.00
714.00 642.60
800.00 56.00
350.00 24.50
2.12 30.32
5794.52 W
57.95
5852.46 X
822.27
6674.73 Y
1001.21
7675.94 Z
76.76
7752.70
7752.70
Rate Amount
1400.00 7325.64
1350.00 3470.04
163.93 1279.15
1500.00 5852.25
163.93 639.57
5000.00 18360.00
145.72 535.08
645.00 7282.05
645.00 4856.85
714.00 5897.64
784.00 721.28
714.00 656.88
800.00 512.00
350.00 224.00
2.12 279.46
2.12 890.46
645.00 11100.45
69882.80 W
698.83
70581.63 X
9916.72
80498.35 Y
12074.75
92573.10 Z
925.73
93498.84
10185.06
10185.05
Rate Amount
1400.00 5860.40
957.00 1001.60
1350.00 2776.01
957.00 491.99
163.93 1279.15
1500.00 4681.80
741.00 578.20
163.93 639.57
5000.00 18360.00
145.72 535.08
645.00 7282.05
645.00 4856.85
714.00 5897.64
784.00 721.28
714.00 656.88
800.00 512.00
350.00 224.00
2.12 279.46
2.12 890.46
645.00 11100.45
68624.87 W
686.25
69311.12 X
9738.21
79049.33 Y
11857.40
90906.73 Z
909.07
91815.80
10001.72
10001.70
Rate Amount
1400.00 798.00
1350.00 378.00
163.93 139.34
1500.00 637.50
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 179.76
645.00 1773.75
714.00 642.60
800.00 64.00
350.00 28.00
2.12 30.32
645.00 1212.60
8011.82 W
80.12
8091.94 X
1136.92
9228.86 Y
1384.33
10613.19 Z
106.13
10719.32
10719.30
Rate Amount
1400.00 638.40
957.00 109.10
1350.00 302.40
957.00 53.59
163.93 139.34
1500.00 510.00
741.00 62.99
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 179.76
645.00 1773.75
714.00 642.60
800.00 64.00
350.00 28.00
2.12 30.32
645.00 1212.60
7874.80 W
78.75
7953.55 X
1117.47
9071.02 Y
1360.65
10431.67 Z
104.32
10535.99
10536.00
Rate Amount
7783.65 7783.65 A
645.00 64.50
714.00 142.80
784.00 31.36
714.00 28.56
714.00 28.56
645.00 1212.60
9292.03 W
15.08
9307.11 X
214.05
9521.16 Y
260.63
9781.79 Z
19.98
9801.77
9801.75
Rate Amount
7600.35 7600.35 A
645.00 64.50
714.00 142.80
784.00 31.36
714.00 28.56
714.00 28.56
645.00 1212.60
9108.73 W
15.08
9123.81 X
214.05
9337.86 Y
260.63
9598.49 Z
19.98
9618.47
9618.45
Rate Amount
1400.00 638.40
957.00 109.10
1350.00 302.40
957.00 53.59
163.93 139.34
1500.00 510.00
741.00 62.99
163.93 69.67
5000.00 2000.00
145.72 58.29
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 56.00
350.00 24.50
2.12 30.32
5680.64 W
56.81
5737.45 X
806.11
6543.56 Y
981.53
7525.09 Z
75.25
7600.34
7600.35
Rate Amount
1400.00 21330.40
1350.00 10103.40
163.93 3721.70
1500.00 17040.00
163.93 1862.24
5000.00 53460.00
145.72 1558.04
749.00 4808.58
645.00 47413.95
714.00 17178.84
800.00 1712.00
350.00 749.00
2.12 852.01
784.00 3920.00
714.00 3570.00
714.00 1071.00
645.00 2902.50
645.00 32327.40
225581.06 W
2255.81
227836.87 X
32011.08
259847.95 Y
38977.19
298825.15 Z
2988.25
301813.40
11291.19
11291.20
Rate Amount
1400.00 17064.60
957.00 2915.98
1350.00 8082.45
957.00 1432.63
163.93 3721.70
1500.00 13632.00
741.00 1683.55
163.93 1862.24
5000.00 53460.00
145.72 1558.04
749.00 4808.58
645.00 47413.95
714.00 17178.84
800.00 1712.00
350.00 749.00
2.12 852.01
784.00 3920.00
714.00 3570.00
714.00 1071.00
645.00 2902.50
645.00 32327.40
221918.47 W
2219.18
224137.66 X
31491.34
255629.00 Y
38344.35
293973.35 Z
2939.73
296913.08
11107.86
11107.85
Rate Amount
10185.05 10185.05 A
645.00 167.70
10352.75 W
1.68
10354.43 X
23.80
10378.22 Y
28.98
10407.20 Z
2.22
10409.42
10409.40
Rate Amount
10001.70 10001.70 A
645.00 167.70
10169.40 W
1.68
10171.08 X
23.80
10194.87 Y
28.98
10223.85 Z
2.22
10226.07
10226.05
Rate Amount
7783.65 7783.65 A
645.00 51.60
7835.25 W
0.52
7835.77 X
7.32
7843.09 Y
8.92
7852.00 Z
0.68
7852.69
7852.70
Rate Amount
7600.35 7600.35 A
645.00 51.60
7651.95 W
0.52
7652.47 X
7.32
7659.79 Y
8.92
7668.70 Z
0.68
7669.39
7669.40
Rate Amount
1400.00 526.68
1350.00 249.48
163.93 91.96
1500.00 420.75
163.93 45.98
5000.00 1320.00
145.72 38.47
645.00 509.55
645.00 361.20
714.00 428.40
784.00 47.04
714.00 42.84
2.12 63.94
2.12 20.12
800.00 40.00
350.00 17.50
645.00 116.10
784.00 39.20
714.00 35.70
645.00 64.50
714.00 107.10
4586.52 W
45.87
4632.38 X
650.85
5283.23 Y
792.48
6075.71 Z
60.76
6136.47
9297.68
9297.70
Rate Amount
1400.00 421.40
957.00 71.97
1350.00 199.53
957.00 35.41
163.93 91.96
1500.00 336.60
741.00 41.57
163.93 45.98
5000.00 1320.00
145.72 38.47
645.00 509.55
645.00 361.20
714.00 428.40
784.00 47.04
714.00 42.84
2.12 63.94
2.12 20.12
800.00 40.00
350.00 17.50
645.00 116.10
784.00 39.20
714.00 35.70
645.00 64.50
714.00 107.10
4496.08 W
44.96
4541.04 X
638.02
5179.06 Y
776.86
5955.92 Z
59.56
6015.48
9114.36
9114.35
Rate Amount
860.00 292.40
240.00 20.40
910.00 154.70
76.00 25.84
59.00 10.03
215.00 49.34
2.12 46.85
2.12 165.36
784.00 588.00
645.00 967.50
2.12 110.24
2.12 55.12
2485.78 W
24.86
2510.64 X
352.75
2863.39 Y
429.51
3292.90 Z
32.93
3325.82
307.95
307.95
Rate Amount
860.00 438.60
910.00 154.70
76.00 38.76
59.00 15.05
215.00 146.20
2.12 58.55
2.12 165.36
784.00 2744.00
645.00 3870.00
2.12 165.36
2.12 110.24
7906.82 W
79.07
7985.89 X
1122.02
9107.90 Y
1366.19
10474.09 Z
104.74
10578.83
669.55
669.55
Rate Amount
93.05 856.57 A
1480.00 157.32
955.00 121.76
2.12 46.85
2.12 275.60
784.00 2352.00
645.00 3870.00
2.12 165.36
2.12 105.36
7950.83 W
70.94
8021.78 X
1006.71
9028.49 Y
1225.79
10254.28 Z
93.98
10348.25
766.54
766.55
Rate Amount
93.05 856.57 A
1480.00 157.32
955.00 121.76
2.12 46.85
2.12 275.60
784.00 2352.00
645.00 3870.00
2.12 165.36
2.12 105.36
7950.83 W
70.94
8021.78 X
1006.71
9028.49 Y
1225.79
10254.28 Z
93.98
10348.25
766.54
766.55
Rate Amount
93.05 598.83 A
955.00 121.76
355.00 37.74
2.12 46.85
2.12 165.36
784.00 980.00
645.00 1612.50
2.12 82.68
2.12 52.17
3697.90 W
30.99
3728.89 X
439.77
4168.66 Y
535.47
4704.13 Z
41.05
4745.19
608.36
608.35
Rate Amount
860.00 146.20
255.00 21.68
965.00 102.58
635.00 53.98
2.12 58.55
2.12 110.24
784.00 784.00
645.00 1290.00
2.12 82.68
2.12 55.12
2705.02 W
27.05
2732.07 X
383.86
3115.93 Y
467.39
3583.32 Z
35.83
3619.15
804.26
804.25
Rate Amount
260.00 750.75
260.00 126.75
40.00 32.00
187.35 8.17
714.00 1249.50
645.00 645.00
2.12 34.17
2846.35 W
28.46
2874.81 X
403.91
3278.72 Y
491.81
3770.53 Z
37.71
3808.24
657.73
657.75
Rate Amount
608.35 851.69
669.55 2155.95
657.75 1091.87
4099.51
652.79
652.80
Rate Amount
260.00 6662.50
40.00 504.00
5000.00 725.00
187.35 77.04
145.72 2.11
714.00 11424.00
645.00 8385.00
2.12 24.80
27804.46 W
278.04
28082.50 X
3945.59
32028.09 Y
4804.21
36832.30 Z
368.32
37200.63
1826.25
1826.25
Rate Amount
260.00 23085.40
187.35 166.35
4120.00 361.74
5200.00 416.00
145.72 2.45
714.00 19992.00
645.00 15480.00
2.12 285.25
1826.25 -60832.39 A
-1043.21 W
597.89
-445.32 X
8484.38
8039.07 Y
10330.72
18369.78 Z
792.02
19161.81
575.26
575.25
860.00 438.60
910.00 154.70
76.00 38.76
59.00 15.05
215.00 146.20
2.12 58.58
2.12 165.36
784.00 2744.00
645.00 3870.00
2.12 165.36
2.12 110.24
7906.84 W
79.07
7985.91 X
1122.02
9107.93 Y
1366.19
10474.12 Z
104.74
10578.86
669.55
669.55
Rate Amount
260.00 3900.00
260.00 0.51
40.00 265.00
4165.51
694.27
4859.78 W
48.60
4908.38 X
689.63
5598.01 Y
839.70
6437.71 Z
64.38
6502.08
246.38
246.40
Rate Amount
260.00 3100.50
260.00 874.25
40.00 504.00
187.35 57.63
714.00 7854.00
645.00 7095.00
2.12 171.15
19656.53 W
196.57
19853.09 X
2789.36
22642.45 Y
3396.37
26038.82 Z
260.39
26299.21
1100.39
1100.40
Rate Amount
860.00 292.40
240.00 20.40
910.00 154.70
76.00 25.84
59.00 10.03
215.00 49.34
2.12 46.85
2.12 165.36
784.00 588.00
645.00 967.50
2.12 110.24
2.12 55.12
2485.78 W
24.86
2510.64 X
352.75
2863.39 Y
429.51
3292.90 Z
32.93
3325.82
307.95
307.95
Rate Amount
260.00 185.25
260.00 503.75
187.35 4.96
714.00 578.34
645.00 348.30
2.12 11.02
1631.63 W
16.32
1647.95 X
231.54
1879.48 Y
281.92
2161.40 Z
21.61
2183.02
181.92
181.90
Rate Amount
260.00 520.00
260.00 568.88
187.35 7.85
714.00 714.00
645.00 483.75
2.12 13.78
2308.26 W
23.08
2331.34 X
327.55
2658.90 Y
398.83
3057.73 Z
30.58
3088.31
772.08
772.10
Rate Amount
260.00 591.50
260.00 708.50
36.00 113.40
187.35 16.64
714.00 449.82
645.00 406.35
2.12 13.78
2299.99 W
23.00
2322.99 X
326.38
2649.37 Y
397.41
3046.78 Z
30.47
3077.25
769.31
769.30
Rate Amount
260.00 347.75
260.00 81.90
36.00 24.35
187.35 4.65
714.00 571.20
645.00 516.00
2.12 15.16
1561.00 W
15.61
1576.61 X
221.51
1798.12 Y
269.72
2067.84 Z
20.68
2088.52
827.14
827.15
Rate Amount
260.00 133.25
260.00 39.00
36.00 19.85
187.35 2.51
714.00 214.20
645.00 161.25
2.12 11.02
581.08 W
5.81
586.89 X
82.46
669.35 Y
100.40
769.75 Z
7.70
777.45
814.93
814.95
Rate Amount
93.05 504.80
2.00 48.00
525.00 929.25
714.00 89.25
645.00 80.63
5200.00 10.92
1480.00 157.32
955.00 121.76
2.12 26.78
2.12 275.60
784.00 2352.00
645.00 3870.00
2.12 165.36
2.12 110.24
8741.90 W
82.37
8824.27 X
1168.89
9993.16 Y
1423.25
11416.42 Z
109.12
11525.53
853.74
853.75
Rate Amount
93.05 346.15 A
2.00 24.00
525.00 535.50
714.00 89.25
645.00 80.63
5200.00 10.92
955.00 121.76
355.00 37.74
2.12 23.43
2.12 165.36
784.00 980.00
645.00 1612.50
2.12 82.68
2.12 55.12
4165.03 W
38.19
4203.21 X
541.92
4745.13 Y
659.85
5404.98 Z
50.59
5455.57
699.43
699.45
Rate Amount
38.00 912.00
15.00 720.00
15.00 720.00
2.12 27.56
2.12 55.12
2434.68 W
24.35
2459.03 X
345.49
2804.52 Y
420.68
3225.20 Z
32.25
3257.45
135.73
135.75
Rate Amount
48.00 1152.00
15.00 720.00
15.00 720.00
2.12 27.56
2.12 55.12
2674.68 W
26.75
2701.43 X
379.55
3080.98 Y
462.15
3543.12 Z
35.43
3578.56
149.11
149.10
Rate Amount
57.00 1368.00
15.00 720.00
15.00 720.00
2.12 27.56
2.12 55.12
2890.68 W
28.91
2919.59 X
410.20
3329.79 Y
499.47
3829.26 Z
38.29
3867.55
161.15
161.15
Rate Amount
67.00 1608.00
15.00 720.00
15.00 720.00
2.12 27.56
2.12 55.12
3130.68 W
31.31
3161.99 X
444.26
3606.25 Y
540.94
4147.18 Z
41.47
4188.65
174.53
174.55
Rate Amount
910.00 406.13
955.00 -426.22
215.00 235.75
46.00 20.53
2.12 137.80
784.00 2352.00
645.00 3870.00
2.12 275.60
6871.59 W
68.72
6940.31 X
975.11
7915.42 Y
1187.31
9102.74 Z
91.03
9193.76
319.23
319.25
Rate Amount
9277.75 9277.75 A
645.00 64.50
714.00 142.80
784.00 31.36
714.00 28.56
714.00 28.56
9573.53 W
2.96
9576.49 X
41.97
9618.46 Y
51.11
9669.57 Z
3.92
9673.49
9673.50
Rate Amount
9095.45 9095.45 A
645.00 64.50
714.00 142.80
784.00 31.36
714.00 28.56
714.00 28.56
9391.23 W
2.96
9394.19 X
41.97
9436.16 Y
51.11
9487.27 Z
3.92
9491.19
9491.20
Rate Amount
7600.35 3420.16 A
645.00 328.95
93.05 19.54 A
898.20 89.82 A
8146.85 20.37 A
2.12 76.96
3955.79 W
4.06
3959.85 X
57.60
4017.45 Y
70.13
4087.59 Z
5.38
4092.96
9095.47
9095.45
Rate Amount
7600.35 7600.35 A
679.00 237.65
558.00 100.44
617.00 30.85
2.00 39.52
8008.81 W
4.08
8012.89 X
57.96
8070.86 Y
70.58
8141.43 Z
5.41
8146.84
8146.85
Rate Amount
9793.75 528.86 A
307.95 184.77 A
645.00 3.23
714.00 7.14
784.00 1.57
714.00 1.43
714.00 1.43
728.42 W
0.15
728.57 X
2.10
730.67 Y
2.56
733.22 Z
0.20
733.42
13581.84
13581.85
Rate Amount
9610.40 518.96 A
307.95 184.77 A
645.00 3.23
714.00 7.14
784.00 1.57
714.00 1.43
714.00 1.43
718.52 W
0.15
718.67 X
2.10
720.77 Y
2.56
723.32 Z
0.20
723.52
13398.49
13398.50
Rate Amount
1400.00 638.40
957.00 109.10
1350.00 302.40
957.00 53.59
163.93 139.34
1500.00 510.00
741.00 62.99
163.93 69.67
5000.00 2000.00
145.72 58.29
0.00
645.00 580.50
645.00 503.10
714.00 499.80
784.00 47.04
714.00 42.84
800.00 56.00
350.00 24.50
2.12 242.53
2.12 30.32
645.00 1212.60
7183.01 W
71.83
7254.84 X
1019.31
8274.15 Y
1241.12
9515.27 Z
95.15
9610.42
9610.42
9610.40
Rate Amount
7783.65 233.51 A
645.00 21.93
2.12 5.79
307.95 110.86 A
2.12 3.41
784.00 13.64
714.00 12.42
645.00 29.03
714.00 1.29
645.00 1.94
714.00 4.28
784.00 0.94
714.00 0.86
714.00 0.86
440.75 W
0.96
441.71 X
13.68
455.39 Y
16.65
472.04 Z
1.28
473.32
15777.38
15777.40
Rate Amount
7600.35 228.01
645.00 21.93 A
2.12 5.79
307.95 110.86 A
2.12 3.41
784.00 13.64
714.00 12.42
645.00 29.03
714.00 1.29
645.00 1.94
714.00 4.28
784.00 0.94
714.00 0.86
714.00 0.86
435.25 W
0.96
436.22 X
13.68
449.89 Y
16.65
466.55 Z
1.28
467.82
15594.08
15594.10
Rate Amount
7783.65 7705.81 A
307.95 2124.86 A
645.00 715.95
645.00 63.86
714.00 141.37
784.00 31.05
714.00 28.27
714.00 28.27
2.12 190.16
2.12 570.49
11600.10 W
17.69
11617.79 X
251.09
11868.88 Y
305.73
12174.61 Z
23.44
12198.05
12321.27
12321.25
Rate Amount
7600.35 7524.35 A
307.95 2124.86 A
645.00 715.95
645.00 63.86
714.00 141.37
784.00 31.05
714.00 28.27
714.00 28.27
2.12 190.16
2.12 570.49
11418.63 W
17.69
11436.32 X
251.09
11687.41 Y
305.73
11993.15 Z
23.44
12016.59
12137.97
12137.95
Rate Amount
7783.65 126.10 A
67.80 57.63 A
307.95 33.26 A
645.00 11.61
645.00 10.32
714.00 2.28
784.00 0.47
714.00 0.43
714.00 0.43
2.12 9.37
2.12 28.66
280.56 W
0.64
281.19 X
9.02
290.22 Y
10.98
301.20 Z
0.84
302.04
18644.62
18644.60
Rate Amount
7600.35 123.13 A
67.80 57.63 A
307.95 33.26 A
645.00 11.61
645.00 10.32
714.00 2.28
784.00 0.47
714.00 0.43
714.00 0.43
2.12 9.37
2.12 28.66
277.59 W
0.64
278.22 X
9.02
287.25 Y
10.98
298.23 Z
0.84
299.07
18461.32
18461.30
Rate Amount
7783.65 5137.21 A
307.95 788.35 A
645.00 483.75
645.00 42.57
714.00 94.25
784.00 20.70
714.00 18.85
714.00 18.85
2.12 38.03
2.12 152.13
2.12 38.03
6832.72 W
9.07
6841.79 X
128.73
6970.52 Y
156.74
7127.27 Z
12.02
7139.29
10817.10
10817.10
Rate Amount
7600.35 5016.23 A
307.95 788.35 A
645.00 483.75
645.00 42.57
714.00 94.25
784.00 20.70
714.00 18.85
714.00 18.85
2.12 38.03
2.12 152.13
2.12 38.03
6711.74 W
9.07
6720.82 X
128.73
6849.55 Y
156.74
7006.29 Z
12.02
7018.31
10633.80
10633.80
Rate Amount
400.00 600.00
2.12 13.23
2.12 13.14
784.00 235.20
714.00 214.20
645.00 696.60
1772.37 W
17.72
1790.10 X
251.51
2041.61 Y
306.24
2347.85 Z
23.48
2371.32
1580.88
1580.90
Rate Amount
350.00 252.00
2.12 7.72
2.12 7.72
784.00 94.08
714.00 85.68
645.00 322.50
769.69 W
7.70
777.39 X
109.22
886.61 Y
132.99
1019.61 Z
10.20
1029.80
1430.28
1430.30
Rate Amount
275.00 103.13
2.12 3.86
2.12 3.86
784.00 47.04
714.00 42.84
645.00 161.25
361.97 W
3.62
365.59 X
51.37
416.96 Y
62.54
479.50 Z
4.80
484.30
1291.46
1291.45
Rate Amount
7783.65 3300.27 A
645.00 27.09
714.00 60.69
784.00 13.33
714.00 12.14
714.00 12.14
608.35 2488.15 A
2.12 45.75
5959.55 W
1.71
5961.26 X
24.28
5985.55 Y
29.57
6015.12 Z
2.27
6017.39
14191.95
14191.95
Rate Amount
7600.35 3222.55 A
645.00 27.09
714.00 60.69
784.00 13.33
714.00 12.14
714.00 12.14
608.35 2488.15 A
2.12 45.75
5881.83 W
1.71
5883.54 X
24.28
5907.83 Y
29.57
5937.40 Z
2.27
5939.67
14008.65
14008.65
Rate Amount
7783.65 95349.71 A
645.00 790.13
714.00 1749.30
784.00 384.16
714.00 349.86
714.00 349.86
608.35 8516.90 A
107489.92 W
36.23
107526.15 X
514.17
108040.32 Y
626.06
108666.37 Z
48.00
108714.37
8874.64
8874.65
Rate Amount
7600.35 93104.29 A
645.00 790.13
714.00 1749.30
784.00 384.16
714.00 349.86
714.00 349.86
608.35 8516.90 A
105244.49 W
36.23
105280.73 X
514.17
105794.89 Y
626.06
106420.95 Z
48.00
106468.94
8691.34
8691.35
Rate Amount
280.00 2940.00
2.12 28.66
2.12 28.66
784.00 196.00
645.00 161.25
3354.57 W
33.55
3388.12 X
476.03
3864.15 Y
579.62
4443.77 Z
44.44
4488.21
448.82
448.80
Rate Amount
4850.00 5092.50
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6648.97 W
66.49
6715.46 X
943.52
7658.98 Y
1148.85
8807.83 Z
88.08
8895.91
88.96
88.95
Rate Amount
4800.00 5040.00
145.72 15.30
784.00 784.00
645.00 645.00
2.12 57.05
6541.35 W
65.41
6606.76 X
928.25
7535.01 Y
1130.25
8665.27 Z
86.65
8751.92
87.52
87.50
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
430.00 5825.64
145.72 15.30
2.12 55.12
714.00 142.80
645.00 967.50
2.12 28.66
7035.02 W
70.35
7105.37 X
998.30
8103.68 Y
1215.55
9319.23 Z
93.19
9412.42
94.12
94.10
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
4850.00 5092.50
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6648.97 W
66.49
6715.46 X
943.52
7658.98 Y
1148.85
8807.83 Z
88.08
8895.91
88.96
88.95
Rate Amount
4800.00 5040.00
145.72 15.30
784.00 784.00
645.00 645.00
2.12 57.05
6541.35 W
65.41
6606.76 X
928.25
7535.01 Y
1130.25
8665.27 Z
86.65
8751.92
87.52
87.50
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
430.00 5825.64
145.72 15.30
2.12 55.12
714.00 142.80
645.00 967.50
2.12 28.66
7035.02 W
70.35
7105.37 X
998.30
8103.68 Y
1215.55
9319.23 Z
93.19
9412.42
94.12
94.10
Rate Amount
4900.00 5145.00
145.72 15.30
2.12 55.12
784.00 784.00
645.00 645.00
2.12 57.05
6701.47 W
67.01
6768.48 X
950.97
7719.46 Y
1157.92
8877.38 Z
88.77
8966.15
89.66
89.65
Rate Amount
4900.00 4900.00
145.72 14.57
2.12 55.12
2.12 330.72
784.00 470.40
645.00 387.00
2.12 57.05
6214.86 W
62.15
6277.01 X
881.92
7158.93 Y
1073.84
8232.77 Z
82.33
8315.10
83.15
83.15
Rate Amount
4900.00 4900.00
145.72 14.57
2.12 55.12
2.12 330.72
784.00 470.40
645.00 387.00
2.12 57.05
6214.86 W
62.15
6277.01 X
881.92
7158.93 Y
1073.84
8232.77 Z
82.33
8315.10
83.15
83.15
Rate Amount
4382.15 315.51
749.00 381.99
645.00 483.75
714.00 656.88
2.12 28.39
2.12 24.80
1891.33 W
18.91
1910.24 X
268.39
2178.63 Y
326.79
2505.42 Z
25.05
2530.48
253.05
253.05
Rate Amount
5699.25 170.98
5000.00 106.50
145.72 3.10
784.00 156.80
714.00 142.80
645.00 161.25
2.12 75.24
900.00 135.00
163.93 24.59
2.12 11.30
2.12 13.23
1000.79 W
10.01
1010.80 X
142.02
1152.81 Y
172.92
1325.73 Z
13.26
1338.99
133.90
133.90
Rate Amount
527.00 5565.12
714.00 178.50
2.12 13.23
5756.85 W
57.57
5814.42 X
816.93
6631.34 Y
994.70
7626.04 Z
76.26
7702.30
729.38
729.40
Rate Amount
34790.00 43139.60
163.93 203.27
440.00 1091.20
187.35 46.46
784.00 1975.68
714.00 1799.28
645.00 5198.70
2.12 256.86
53711.06 W
537.11
54248.17 X
7621.87
61870.03 Y
9280.50
71150.54 Z
711.51
71862.04
63877.37
63877.35
Rate Amount
25614.00 7761.04
163.93 49.67
440.00 266.64
187.35 11.43
5000.00 18.00
145.72 0.52
1500.00 1350.00
163.93 147.54
784.00 1975.68
714.00 1799.28
645.00 5198.70
2.12 256.86
18835.36 W
188.35
19023.72 X
2672.83
21696.55 Y
3254.48
24951.03 Z
249.51
25200.54
22400.48
22400.50
Rate Amount
375.00 2812.50
47.00 58.75
29.00 913.50
2.12 57.05
784.00 94.08
714.00 85.68
645.00 161.25
2.12 57.05
4239.86 W
42.40
4282.26 X
601.66
4883.91 Y
732.59
5616.50 Z
56.17
5672.67
567.27
567.25
Rate Amount
210.00 98.70
145.72 0.71
2.12 85.44
714.00 142.80
645.00 129.00
456.65 W
4.57
461.22 X
64.80
526.02 Y
78.90
604.92 Z
6.05
610.97
203.66
203.65
Rate Amount
210.00 132.30
145.72 0.95
2.12 114.10
714.00 192.78
645.00 174.15
614.28 W
6.14
620.42 X
87.17
707.59 Y
106.14
813.73 Z
8.14
821.86
273.95
273.95
Rate Amount
286.00 286.00
40.00 2.40
2.12 2.20
714.00 47.84
645.00 43.22
2.12 3.86
385.52 W
3.86
389.37 X
54.71
444.08 Y
66.61
510.69 Z
5.11
515.80
515.80
Rate Amount
381.00 381.00
40.00 2.40
2.12 2.76
714.00 63.55
645.00 57.41
2.12 4.96
512.07 W
5.12
517.19 X
72.66
589.85 Y
88.48
678.33 Z
6.78
685.11
685.10
Rate Amount
195.00 91.65
145.72 0.71
2.12 85.44
714.00 142.80
645.00 129.00
449.60 W
4.50
454.10 X
63.80
517.90 Y
77.68
595.58 Z
5.96
601.54
200.51
200.50
Rate Amount
195.00 122.85
145.72 0.95
2.12 114.10
714.00 192.78
645.00 174.15
604.83 W
6.05
610.87 X
85.83
696.70 Y
104.51
801.21 Z
8.01
809.22
269.74
269.75
Rate Amount
784.00 392.00
714.00 357.00
645.00 645.00
2.12 57.05
1451.05 W
14.51
1465.56 X
205.91
1671.47 Y
250.72
1922.19 Z
19.22
1941.41
64.71
64.70
Rate Amount
700.00 262.50
645.00 2580.00
2842.50 W
28.43
2870.93 X
403.36
3274.29 Y
491.14
3765.43 Z
37.65
3803.09
905.50
905.50
Rate Amount
784.00 15.68
714.00 14.28
645.00 161.25
645.00 96.75
287.96 W
2.88
290.84 X
40.86
331.70 Y
49.76
381.46 Z
3.81
385.27
385.25
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1630.20
145.72 30.44
29.00 59.40
400.00 350.00
210.00 210.00
749.00 120.53
645.00 1116.00
714.00 555.30
350.00 25.90
2.12 26.00
5977.33 W
59.77
6037.10 X
848.21
6885.31 Y
1032.80
7918.11 Z
79.18
7997.29
7997.30
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1750.00
145.72 51.00
29.00 50.75
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6427.30 W
64.27
6491.57 X
912.07
7403.64 Y
1110.55
8514.18 Z
85.14
8599.33
8599.35
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1850.00
145.72 53.92
29.00 53.65
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6533.11 W
65.33
6598.44 X
927.08
7525.53 Y
1128.83
8654.35 Z
86.54
8740.90
8740.90
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1950.00
145.72 56.83
29.00 56.55
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6638.93 W
66.39
6705.32 X
942.10
7647.41 Y
1147.11
8794.53 Z
87.95
8882.47
8882.45
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 2050.00
145.72 59.75
29.00 59.45
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6744.74 W
67.45
6812.19 X
957.11
7769.30 Y
1165.40
8934.70 Z
89.35
9024.04
9024.05
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1650.00
145.72 48.09
29.00 47.85
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7534.08 W
75.34
7609.43 X
1069.12
8678.55 Y
1301.78
9980.33 Z
99.80
10080.14
10080.15
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1750.00
145.72 51.00
29.00 50.75
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7639.90 W
76.40
7716.30 X
1084.14
8800.44 Y
1320.07
10120.50 Z
101.21
10221.71
10221.70
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1850.00
145.72 53.92
29.00 53.65
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7745.71 W
77.46
7823.17 X
1099.16
8922.33 Y
1338.35
10260.67 Z
102.61
10363.28
10363.30
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 1950.00
145.72 56.83
29.00 56.55
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7851.53 W
78.52
7930.04 X
1114.17
9044.21 Y
1356.63
10400.85 Z
104.01
10504.85
10504.85
Rate Amount
1400.00 769.50
1350.00 378.00
163.93 88.20
1500.00 573.75
163.93 44.10
5000.00 2050.00
145.72 59.75
29.00 59.45
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
645.00 1212.60
7957.34 W
79.57
8036.92 X
1129.19
9166.10 Y
1374.92
10541.02 Z
105.41
10646.43
10646.45
Rate Amount
1400.00 615.60
957.00 119.47
1350.00 302.40
957.00 58.69
163.93 88.20
1500.00 459.00
741.00 63.16
163.93 44.10
5000.00 1650.00
145.72 48.09
29.00 47.85
400.00 400.00
210.00 210.00
749.00 127.33
645.00 1290.00
714.00 642.60
350.00 24.50
2.12 27.56
6218.55 W
62.19
6280.74 X
882.44
7163.18 Y
1074.48
8237.66 Z
82.38
8320.04
8320.05
Rate Amount
1400.00 615.60
957.00 119.47
1350.00 302.40
957.00 58.69
163.93 88.20
1500.00 459.00
741.00 63.16
163.93 44.10
5000.00 1630.20
145.72 30.44
29.00 59.40
400.00 400.00
210.00 210.00
749.00 120.53
645.00 1116.00
714.00 555.30
350.00 25.90
2.12 26.00
645.00 1049.04
6923.44 W
69.23
6992.67 X
982.47
7975.14 Y
1196.27
9171.41 Z
91.71
9263.13
9263.15
Rate Amount
5000.00 500.00
145.72 14.57
514.57 W
5.15
519.72 X
73.02
592.74 Y
88.91
681.65 Z
6.82
688.47
688.45
Rate Amount
10185.05 14055.37 A
307.95 14122.59 A
78.20 703.80 A
2.12 27.56
2.12 169.49
784.00 784.00
645.00 3870.00
177.85 2941.64 A
36674.45 W
48.51
36722.96 X
688.39
37411.35 Y
838.19
38249.54 Z
64.26
38313.80
38313.80
27763.63
27763.65
Rate Amount
10001.70 13802.35 A
307.95 14122.59 A
78.20 703.80 A
2.12 27.56
2.12 169.49
784.00 784.00
645.00 3870.00
177.85 2941.64 A
36421.43 W
48.51
36469.94 X
688.39
37158.33 Y
838.19
37996.52 Z
64.26
38060.78
27580.28
27580.30
Rate Amount
210.00 210.00
210.00 W
2.10
212.10 X
29.80
241.90 Y
36.29
278.19 Z
2.78
280.97
280.95
Rate Amount
38.00 76.00
2.12 2.12
714.00 235.62
645.00 109.65
2.12 6.36
429.75 W
4.30
434.05 X
60.98
495.03 Y
74.25
569.29 Z
5.69
574.98
57.50
57.50
Rate Amount
31.00 31.00
2.12 7.99
2.12 37.67
76.66 W
0.77
77.43 X
10.88
88.31 Y
13.25
101.56 Z
1.02
102.57
102.55
Rate Amount
41.00 41.00
2.12 12.51
2.12 53.36
106.87 W
1.07
107.94 X
15.17
123.10 Y
18.47
141.57 Z
1.42
142.98
143.00
Rate Amount
72.00 72.00
2.12 18.42
2.12 62.77
153.20 W
1.53
154.73 X
21.74
176.47 Y
26.47
202.94 Z
2.03
204.97
204.95
Rate Amount
83.00 83.00
2.12 27.22
2.12 69.05
179.27 W
1.79
181.06 X
25.44
206.50 Y
30.98
237.48 Z
2.37
239.85
239.85
Rate Amount
114.00 114.00
2.12 32.82
2.12 69.05
215.87 W
2.16
218.02 X
30.63
248.66 Y
37.30
285.96 Z
2.86
288.82
288.80
Rate Amount
286.00 457.60
35.84 2.15
2.12 2.76
714.00 47.84
645.00 43.22
2.12 4.96
558.52 W
5.59
564.11 X
79.26
643.36 Y
96.50
739.87 Z
7.40
747.27
747.25
Rate Amount
286.00 686.40
35.84 2.15
2.12 2.76
714.00 47.84
645.00 43.22
2.12 4.96
787.32 W
7.87
795.19 X
111.72
906.92 Y
136.04
1042.96 Z
10.43
1053.39
1053.40
Rate Amount
3193.00 3193.00
156.00 663.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
4335.14 W
43.35
4378.49 X
615.18
4993.67 Y
749.05
5742.72 Z
57.43
5800.14
5800.15
Rate Amount
4120.00 4120.00
156.00 702.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
5301.14 W
53.01
5354.15 X
752.26
6106.41 Y
915.96
7022.37 Z
70.22
7092.59
7092.60
Rate Amount
5562.00 5562.00
156.00 741.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
6782.14 W
67.82
6849.96 X
962.42
7812.38 Y
1171.86
8984.24 Z
89.84
9074.08
9074.10
Rate Amount
2472.00 2472.00
156.00 663.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
3614.14 W
36.14
3650.28 X
512.86
4163.14 Y
624.47
4787.62 Z
47.88
4835.49
4835.50
Rate Amount
2884.00 2884.00
156.00 702.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
4065.14 W
40.65
4105.79 X
576.86
4682.65 Y
702.40
5385.05 Z
53.85
5438.90
5438.90
Rate Amount
3468.00 3468.00
156.00 741.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
4688.14 W
46.88
4735.02 X
665.27
5400.29 Y
810.04
6210.33 Z
62.10
6272.44
6272.45
Rate Amount
2912.00 2912.00
156.00 663.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
4054.14 W
40.54
4094.68 X
575.30
4669.98 Y
700.50
5370.48 Z
53.70
5424.18
5424.20
Rate Amount
3328.00 3328.00
156.00 702.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
4509.14 W
45.09
4554.23 X
639.87
5194.10 Y
779.11
5973.21 Z
59.73
6032.95
6032.95
Rate Amount
4160.00 4160.00
156.00 741.00
2.12 264.79
784.00 39.20
784.00 78.40
645.00 96.75
5380.14 W
53.80
5433.94 X
763.47
6197.41 Y
929.61
7127.02 Z
71.27
7198.29
7198.30
Rate Amount
8882.45 346.42 P
86.60 R
4900.00 229.32
56.00 33.60
804.25 1021.40 A
1505.30 1505.30 A
144.90 184.02 A
2.12 213.42
3620.08 W
4.76
3624.84 X
67.60
3692.44 Y
82.30
3774.74 Z
6.31
3781.05
727.13
727.15
Rate Amount
8882.45 275.36 P
68.84 R
4900.00 182.28
56.00 33.60
804.25 916.85 A
1505.30 1505.30 A
144.90 165.19 A
2.12 213.42
3360.84 W
4.29
3365.13 X
60.92
3426.05 Y
74.18
3500.23 Z
5.69
3505.92
674.22
674.20
Rate Amount
8882.45 239.83 P
59.96 R
4900.00 158.76
56.00 33.60
804.25 860.55 A
1505.30 1505.30 A
144.90 155.04 A
2.12 213.42
3226.46 W
4.06
3230.52 X
57.58
3288.10 Y
70.11
3358.21 Z
5.38
3363.59
646.84
646.85
Rate Amount
617187.95 617187.95 P
67890.67
8640.63
693719.25 W
6937.19
700656.44 X
98442.23
799098.67 Y
119864.80
918963.47 Z
9189.63
928153.10
7734.61
7734.60
Rate Amount
702779.75 702779.75 P
77305.77
9838.92
789924.44 W
7899.24
797823.68 X
112094.23
909917.91 Y
136487.69
1046405.60 Z
10464.06
1056869.65
8807.25
8807.25
Rate Amount
9483.75 9483.75
8807.25 -8807.25
676.50
676.50
676.50
Rate Amount
756763.35 756763.35 P
83243.97
10594.69
850602.01 W
8506.02
859108.03 X
120704.68
979812.71 Y
146971.91
1126784.62 Z
11267.85
1138052.47
9483.77
9483.75
Rate Amount
5000.00 288000.00
1500.00 81000.00
1400.00 90720.00
1350.00 58320.00
29.00 6472.80
714.00 671.16
784.00 2744.00
645.00 12900.00
2400.00 3840.00
300.00 480.00
1300.00 2080.00
44760.00
37.30
210.00 25200.00
617187.96
617187.96
617187.95
Rate Amount
5000.00 288000.00
1500.00 82470.00
1400.00 80556.00
1350.00 51597.00
29.00 6681.60
28.00 100800.00
714.00 671.16
784.00 2744.00
645.00 12900.00
2400.00 3840.00
300.00 480.00
1300.00 2080.00
37.30 44760.00
210.00 25200.00
702779.76
702779.76
702779.75
Rate Amount
5000.00 288000.00
1500.00 81000.00
1400.00 90720.00
1350.00 58320.00
29.00 6681.60
28.00 141120.00
714.00 599.76
784.00 2352.00
645.00 11610.00
2400.00 3840.00
300.00 480.00
1300.00 2080.00
37.30 44760.00
210.00 25200.00
756763.36
756763.36
756763.35
Rate Amount
1500.00 360000.00
7945.65 92964.11 A
89.65 73423.35 A
7997.30 1314756.12 A
2800.00 38668.00
5000.00 34500.00
5000.00 12000.00
145.72 1355.20
3500.00 3500.00
4900.00 88611.60
3.40 20947.40 A
2.12 49883.60
29.00 8009.51
4.50 1080.00
72.00 17280.00
3000.00 6000.00
219.35 42404.74 A
2928.10 59733.24 A
2.12 2495.24
2.12 40704.00
2268316.10 W
6640.87
2274956.97 X
94237.29
2369194.26 Y
114744.80
2483939.06 Z
8797.10
2492736.16
17310.67
17310.65
Rate Amount
4590.00 2267.46
437.15 215.95
4355.20 1088.80
2.12 5.79
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
5143.73 W
51.44
5195.17 X
729.92
5925.09 Y
888.76
6813.85 Z
68.14
6881.99
6882.00
Rate Amount
4590.00 2267.46
437.15 215.95
3686.30 921.58
2.12 5.79
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
4976.50 W
49.77
5026.27 X
706.19
5732.46 Y
859.87
6592.33 Z
65.92
6658.25
6658.25
Rate Amount
3800.00 1850.60
437.15 212.89
4355.20 958.14
2.12 5.79
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4295.28 W
42.95
4338.24 X
609.52
4947.76 Y
742.16
5689.92 Z
56.90
5746.82
5746.80
Rate Amount
3800.00 1850.60
437.15 212.89
3686.30 810.99
2.12 5.79
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4148.13 W
41.48
4189.61 X
588.64
4778.25 Y
716.74
5494.98 Z
54.95
5549.93
5549.95
Rate Amount
4200.00 2074.80
437.15 215.95
3686.30 921.58
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
6002.23 W
60.02
6062.25 X
851.75
6914.00 Y
1037.10
7951.10 Z
79.51
8030.61
8030.60
Rate Amount
4800.00 2337.60
437.15 212.89
3686.30 810.99
2.12 5.79
784.00 344.96
714.00 314.16
645.00 922.35
714.00 128.52
2.12 34.73
0.00
645.00 728.85
5840.84 W
58.41
5899.25 X
828.84
6728.09 Y
1009.21
7737.30 Z
77.37
7814.67
7814.65
Rate Amount
4590.00 2267.46
4355.20 1088.80
437.15 215.95
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
6362.11 W
63.62
6425.73 X
902.82
7328.55 Y
1099.28
8427.83 Z
84.28
8512.11
8512.10
Rate Amount
4590.00 2267.46
3686.30 921.58
437.15 215.95
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
6194.89 W
61.95
6256.84 X
879.09
7135.93 Y
1070.39
8206.32 Z
82.06
8288.38
8288.40
Rate Amount
4500.00 562.50
562.50 W
5.63
568.13 X
79.82
647.95 Y
97.19
745.14 Z
7.45
752.59
142.00
142.00
Rate Amount
4850.00 261.90
2.12 28.66
145.72 0.73
784.00 290.08
714.00 264.18
645.00 593.40
2.12 9.65
1448.60 W
14.49
1463.08 X
205.56
1668.65 Y
250.30
1918.94 Z
19.19
1938.13
193.81
193.80
Rate Amount
862.90 2329.83 A
70.00 84.00
784.00 94.08
714.00 85.68
645.00 38.70
2632.29 W
3.02
2635.31 X
42.92
2678.23 Y
52.26
2730.49 Z
4.01
2734.50
273.45
273.45
Rate Amount
4590.00 1730.43
5024.15 909.37
437.15 164.81
784.00 564.48
714.00 514.08
645.00 1135.20
714.00 257.04
2.12 15.16
645.00 832.05
6122.61 W
61.23
6183.84 X
868.83
7052.67 Y
1057.90
8110.57 Z
81.11
8191.68
819.17
819.15
Rate Amount
4590.00 2267.46
5024.15 1256.04
437.15 215.95
2.12 5.79
1826.25 4109.06 A
2.12 39.96
784.00 415.52
714.00 378.42
645.00 1477.05
714.00 142.80
645.00 728.85
11036.90 W
69.28
11106.18 X
983.10
12089.28 Y
1197.03
13286.31 Z
91.77
13378.08
13378.10
Rate Amount
4590.00 2469.42
5024.15 1256.04
437.15 235.19
2.12 5.79
1826.25 4109.06 A
2.12 39.96
784.00 885.92
714.00 806.82
645.00 2850.90
714.00 142.80
645.00 728.85
13530.75 W
94.22
13624.96 X
1336.98
14961.95 Y
1627.93
16589.88 Z
124.81
16714.69
16714.70
Rate Amount
260.00 23085.40
187.35 166.35
4120.00 361.74
5200.00 416.00
145.72 2.45
714.00 19992.00
645.00 15480.00
2.12 285.25
1826.25 -60832.39
-1043.21 W
597.89
-445.32 X
8484.38
8039.07 Y
10330.72
18369.78 Z
792.02
19161.81
575.26
575.25
Rate Amount
4590.00 2593.35
5024.15 1406.76
437.15 246.99
2.12 28.66
784.00 352.80
714.00 321.30
645.00 999.75
714.00 499.80
6449.41 W
64.49
6513.91 X
915.20
7429.11 Y
1114.37
8543.48 Z
85.43
8628.91
862.89
862.90
Rate Amount
4590.00 2593.35
4355.20 1219.46
437.15 246.99
2.12 28.66
784.00 352.80
714.00 321.30
645.00 999.75
714.00 499.80
6262.11 W
62.62
6324.73 X
888.62
7213.35 Y
1082.00
8295.36 Z
82.95
8378.31
837.83
837.85
Rate Amount
4590.00 2593.35
5024.15 1406.76
437.15 246.99
2.12 28.66
784.00 470.40
714.00 428.40
645.00 1290.00
714.00 499.80
645.00 832.05
7796.41 W
77.96
7874.38 X
1106.35
8980.73 Y
1347.11
10327.84 Z
103.28
10431.12
1043.11
1043.10
Rate Amount
4590.00 2593.35
4355.20 1219.46
437.15 246.99
2.12 28.66
784.00 470.40
714.00 428.40
645.00 1290.00
714.00 499.80
645.00 832.05
7609.11 W
76.09
7685.20 X
1079.77
8764.97 Y
1314.75
10079.72 Z
100.80
10180.51
1018.05
1018.05
Rate Amount
4500.00 562.50
5.63
568.13 W
79.82
647.95 X
97.19
745.14 Y
7.45
752.59 Z
12.58
12.60
Rate Amount
4850.00 640.20
145.72 1.92
2.12 3.86
645.98 W
6.46
652.44 X
91.67
744.11 Y
111.62
855.73 Z
8.56
864.29
86.43
86.45
Rate Amount
4600.00 3574.20
4355.20 1742.08
262.29 203.80
2.12 9.65
784.00 548.80
714.00 499.80
645.00 993.30
714.00 142.80
7714.43 W
77.14
7791.57 X
1094.72
8886.29 Y
1332.94
10219.23 Z
102.19
10321.42
10321.40
Rate Amount
4600.00 3574.20
3686.30 1474.52
262.29 203.80
2.12 9.65
784.00 548.80
714.00 499.80
645.00 993.30
714.00 142.80
7446.87 W
74.47
7521.33 X
1056.75
8578.08 Y
1286.71
9864.79 Z
98.65
9963.44
9963.45
Rate Amount
4600.00 3574.20
262.29 203.80
3686.30 1474.52
2.12 9.65
784.00 548.80
714.00 499.80
645.00 993.30
714.00 142.80
7446.87 W
74.47
7521.34 X
1056.75
8578.08 Y
1286.71
9864.79 Z
98.65
9963.44
9963.45
Rate Amount
4600.00 3574.20
262.29 203.80
3686.30 1474.52
2.12 9.65
784.00 705.60
714.00 642.60
645.00 1161.00
714.00 142.80
645.00 728.85
2.12 71.66
8714.67 W
87.15
8801.82 X
1236.66
10038.47 Y
1505.77
11544.24 Z
115.44
11659.69
11659.70
Rate Amount
4600.00 3574.20
262.29 203.80
4355.20 1524.32
2.12 11.58
1826.25 4109.06 A
2.12 39.96
784.00 619.36
714.00 564.06
645.00 2070.45
714.00 142.80
645.00 728.85
13588.44 W
94.79
13683.23 X
1345.17
15028.40 Y
1637.90
16666.30 Z
125.57
16791.88
16791.90
Rate Amount
4600.00 3638.60
262.29 207.47
4355.20 1524.32
2.12 11.58
1826.25 4109.06 A
2.12 39.96
784.00 1176.00
714.00 1071.00
645.00 3437.85
714.00 142.80
645.00 728.85
16087.49 W
119.78
16207.28 X
1699.80
17907.07 Y
2069.70
19976.78 Z
158.68
20135.45
20135.45
Rate Amount
4600.00 1734.20
262.29 98.88
5024.15 753.62
2.12 17.09
784.00 736.96
714.00 671.16
645.00 1212.60
714.00 235.62
645.00 832.05
6292.18 W
62.92
6355.10 X
892.89
7248.00 Y
1087.20
8335.20 Z
83.35
8418.55
841.85
841.85
Rate Amount
8512.10 587.33 A
2.12 43.82
631.16 W
0.44
631.59 X
6.22
637.81 Y
7.57
645.38 Z
0.58
645.96
645.95
Rate Amount
700.00 262.50
645.00 2580.00
2842.50 W
28.43
2870.93 X
403.36
3274.29 Y
491.14
3765.43 Z
37.65
3803.09
905.50
905.50
Rate Amount
714.00 14.28
645.00 161.25
645.00 96.75
287.96 W
2.88
290.84 X
40.86
331.70 Y
49.76
381.46 Z
3.81
385.27
385.25
Rate Amount
4590.00 2267.46
437.15 215.95
3686.30 921.58
2.12 34.73
645.00 322.50
784.00 274.40
714.00 249.90
645.00 690.15
714.00 142.80
5119.46 W
51.19
5170.66 X
726.48
5897.13 Y
884.57
6781.70 Z
67.82
6849.52
6849.50
Rate Amount
4590.00 2267.46
437.15 215.95
3686.30 921.58
2.12 34.73
645.00 322.50
784.00 360.64
714.00 328.44
645.00 1032.00
714.00 142.80
645.00 728.85
2.12 47.40
6402.35 W
64.02
6466.37 X
908.52
7374.89 Y
1106.23
8481.13 Z
84.81
8565.94
8565.95
Rate Amount
3800.00 1850.60
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4177.06 W
41.77
4218.83 X
592.75
4811.58 Y
721.74
5533.32 Z
55.33
5588.65
5588.65
Rate Amount
3800.00 1850.60
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 344.96
714.00 314.16
645.00 922.35
714.00 128.52
645.00 728.85
2.12 47.40
5395.45 W
53.95
5449.40 X
765.64
6215.04 Y
932.26
7147.30 Z
71.47
7218.77
7218.75
Rate Amount
5200.00 2532.40
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4858.86 W
48.59
4907.45 X
689.50
5596.95 Y
839.54
6436.49 Z
64.36
6500.85
6500.85
Rate Amount
5200.00 2532.40
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 344.96
714.00 314.16
645.00 922.35
714.00 128.52
645.00 728.85
2.12 47.40
6077.25 W
60.77
6138.02 X
862.39
7000.41 Y
1050.06
8050.47 Z
80.50
8130.97
8130.95
Rate Amount
4700.00 2321.80
437.15 215.95
3686.30 921.58
2.12 34.73
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
5059.78 W
50.60
5110.38 X
718.01
5828.39 Y
874.26
6702.65 Z
67.03
6769.67
6769.65
Rate Amount
4700.00 2321.80
437.15 215.95
3686.30 921.58
2.12 34.73
784.00 344.96
714.00 314.16
645.00 1161.00
714.00 142.80
645.00 728.85
2.12 47.40
6233.23 W
62.33
6295.56 X
884.53
7180.08 Y
1077.01
8257.10 Z
82.57
8339.67
8339.65
Rate Amount
4200.00 2074.80
437.15 215.95
0.00
3686.30 921.58
2.12 34.73
0.00
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
4812.78 W
48.13
4860.91 X
682.96
5543.87 Y
831.58
6375.45 Z
63.75
6439.20
6439.20
Rate Amount
4200.00 2074.80
437.15 215.95
0.00
3686.30 921.58
2.12 34.73
0.00
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
645.00 728.85
2.12 47.40
6031.17 W
60.31
6091.48 X
855.85
6947.33 Y
1042.10
7989.43 Z
79.89
8069.32
8069.30
Rate Amount
4800.00 2337.60
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4664.07 W
46.64
4710.71 X
661.85
5372.56 Y
805.88
6178.44 Z
61.78
6240.23
6240.25
Rate Amount
4800.00 2337.60
437.15 212.89
3686.30 810.99
2.12 34.73
784.00 344.96
714.00 314.16
645.00 922.35
714.00 128.52
645.00 728.85
2.12 47.40
5882.45 W
58.82
5941.27 X
834.75
6776.02 Y
1016.40
7792.42 Z
77.92
7870.35
7870.35
Rate Amount
4500.00 2223.00
4355.20 1088.80
437.15 215.95
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 19.02
645.00 728.85
6289.27 W
62.89
6352.16 X
892.48
7244.64 Y
1086.70
8331.34 Z
83.31
8414.65
8414.65
Rate Amount
4500.00 2223.00
3686.30 921.58
437.15 215.95
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 19.02
645.00 728.85
6122.05 W
61.22
6183.27 X
868.75
7052.02 Y
1057.80
8109.82 Z
81.10
8190.92
8190.90
Rate Amount
3950.00 1923.65
4355.20 958.14
437.15 212.89
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
5884.58 W
58.85
5943.43 X
835.05
6778.48 Y
1016.77
7795.25 Z
77.95
7873.20
7873.20
Rate Amount
3950.00 1923.65
3686.30 810.99
437.15 212.89
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
5737.43 W
57.37
5794.80 X
814.17
6608.97 Y
991.35
7600.32 Z
76.00
7676.32
7676.30
Rate Amount
5050.00 2459.35
4355.20 958.14
437.15 212.89
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
6420.28 W
64.20
6484.48 X
911.07
7395.55 Y
1109.33
8504.88 Z
85.05
8589.93
8589.95
Rate Amount
5050.00 2459.35
3686.30 810.99
437.15 212.89
2.12 5.79
784.00 368.48
714.00 335.58
645.00 1161.00
714.00 142.80
2.12 47.40
645.00 728.85
6273.13 W
62.73
6335.86 X
890.19
7226.05 Y
1083.91
8309.96 Z
83.10
8393.06
8393.05
Rate Amount
5000.00 2435.00
4355.20 958.14
437.15 212.89
2.12 5.79
784.00 258.72
714.00 235.62
645.00 645.00
714.00 128.52
4879.68 W
48.80
4928.48 X
692.45
5620.93 Y
843.14
6464.07 Z
64.64
6528.71
6528.70
Rate Amount
5000.00 2435.00
4382.15 1095.54
437.15 212.89
2.12 5.79
1826.25 4109.06 A
784.00 329.28
714.00 299.88
645.00 1199.70
714.00 142.80
9829.94 W
57.21
9887.15 X
811.82
10698.97 Y
988.49
11687.46 Z
75.78
11763.24
11763.25
Rate Amount
2650.00 2650.00
4355.20 653.28
163.93 163.93
2.12 5.79
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
88.95 1174.14 A
645.00 728.85
6941.72 W
57.68
6999.39 X
818.45
7817.84 Y
996.56
8814.40 Z
76.40
8890.80
8890.80
Rate Amount
480.00 4800.00
25.50 637.50
2.12 28.66
784.00 392.00
645.00 645.00
6503.16 W
65.03
6568.19 X
922.83
7491.03 Y
1123.65
8614.68 Z
86.15
8700.83
870.08
870.10
Rate Amount
645.00 1115.85
1115.85 W
11.16
1127.01 X
158.34
1285.35 Y
192.80
1478.16 Z
14.78
1492.94
149.29
149.30
Rate Amount
2.12 5.79
4590.00 211.14
437.15 20.11
3713.20 13.37
749.00 74.90
645.00 64.50
714.00 21.42
2.12 5.79
417.02 W
4.17
421.19 X
59.18
480.37 Y
72.06
552.43 Z
5.52
557.95
55.80
55.80
Rate Amount
3950.00 2231.75
5024.15 1406.76
437.15 246.99
2.12 28.66
784.00 470.40
714.00 428.40
645.00 1290.00
714.00 499.80
645.00 832.05
7434.81 W
74.35
7509.16 X
1055.04
8564.20 Y
1284.63
9848.83 Z
98.49
9947.32
994.73
994.75
Rate Amount
3950.00 2231.75
4355.20 1219.46
437.15 246.99
2.12 28.66
784.00 470.40
714.00 428.40
645.00 1290.00
714.00 499.80
645.00 832.05
7247.51 W
72.48
7319.98 X
1028.46
8348.44 Y
1252.27
9600.71 Z
96.01
9696.72
969.67
969.65
Rate Amount
2650.00 2650.00
14.00 420.00
2.12 5.79
784.00 282.24
714.00 257.04
645.00 883.65
645.00 728.85
5227.57 W
52.28
5279.84 X
741.82
6021.66 Y
903.25
6924.91 Z
69.25
6994.16
6994.15
Rate Amount
1100.00 1100.00
5000.00 350.00
192.86 223.72
3686.30 1216.48
714.00 763.98
645.00 690.15
645.00 457.95
714.00 64.26
2.12 97.01
2.12 9.37
4972.92 W
49.73
5022.65 X
705.68
5728.33 Y
859.25
6587.58 Z
65.88
6653.45
6653.45
Rate Amount
1100.00 1100.00
5000.00 350.00
192.86 223.72
3686.30 1216.48
714.00 956.76
645.00 935.25
645.00 457.95
714.00 64.26
2.12 119.89
645.00 728.85
2.12 32.25
6185.40 W
61.85
6247.25 X
877.74
7124.99 Y
1068.75
8193.74 Z
81.94
8275.68
8275.70
Rate Amount
714.00 414.12
645.00 174.15
588.27 W
5.88
594.15 X
83.48
677.63 Y
101.64
779.28 Z
7.79
787.07
787.05
Rate Amount
1100.00 319.00
192.86 55.93
714.00 1013.88
645.00 225.75
1614.56 W
16.15
1630.70 X
229.11
1859.82 Y
278.97
2138.79 Z
21.39
2160.18
2160.20
Rate Amount
1100.00 110.00
192.86 19.29
714.00 192.78
645.00 341.85
663.92 W
6.64
670.56 X
94.21
764.77 Y
114.72
879.48 Z
8.79
888.28
888.30
Rate Amount
3686.30 1105.89
1100.00 1331.00
5000.00 350.00
192.86 264.22
714.00 1513.68
645.00 799.80
645.00 457.95
714.00 64.26
2.12 28.66
5915.46 W
59.15
5974.62 X
839.43
6814.05 Y
1022.11
7836.16 Z
78.36
7914.52
7914.50
Rate Amount
3686.30 1105.89
1100.00 1210.00
5000.00 350.00
192.86 243.00
714.00 1256.64
645.00 799.80
645.00 457.95
714.00 64.26
2.12 28.66
5516.21 W
55.16
5571.37 X
782.78
6354.15 Y
953.12
7307.27 Z
73.07
7380.34
7380.35
Rate Amount
3686.30 1105.89
1100.00 1331.00
5000.00 350.00
192.86 264.22
714.00 1699.32
645.00 1025.55
645.00 457.95
714.00 64.26
645.00 728.85
2.12 79.92
7106.96 W
71.07
7178.03 X
1008.51
8186.55 Y
1227.98
9414.53 Z
94.15
9508.67
9508.65
Rate Amount
3686.30 1105.89
1100.00 1210.00
5000.00 350.00
192.86 243.00
714.00 1442.28
645.00 1025.55
645.00 457.95
714.00 64.26
645.00 728.85
2.12 79.92
6707.71 W
67.08
6774.78 X
951.86
7726.64 Y
1159.00
8885.64 Z
88.86
8974.49
8974.50
Rate Amount
714.00 478.38
645.00 174.15
652.53 W
6.53
659.06 X
92.60
751.65 Y
112.75
864.40 Z
8.64
873.04
873.05
Rate Amount
1100.00 352.00
192.86 61.72
714.00 1192.38
645.00 225.75
1831.85 W
18.32
1850.16 X
259.95
2110.11 Y
316.52
2426.63 Z
24.27
2450.89
2450.90
Rate Amount
1100.00 121.00
192.86 21.21
714.00 235.62
645.00 341.85
719.68 W
7.20
726.88 X
102.13
829.01 Y
124.35
953.36 Z
9.53
962.89
962.90
Rate Amount
80.00 106.64
145.72 4.52
645.00 9.68
714.00 62.83
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
381.16 W
3.81
384.97 X
54.09
439.06 Y
65.86
504.92 Z
5.05
509.97
50997.00
50997.00
Rate Amount
205.00 273.27
145.72 4.52
645.00 9.68
714.00 62.83
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
547.79 W
5.48
553.27 X
77.73
631.00 Y
94.65
725.65 Z
7.26
732.91
73291.00
73291.00
Rate Amount
80.00 106.64
145.72 4.52
0.00
0.00
0.00
645.00 9.68
0.00
0.00
714.00 125.66
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
0.00
0.00
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
522.67 W
5.23
527.89 X
74.17
602.06 Y
90.31
692.37 Z
6.92
699.30
69930.00
69930.00
Rate Amount
205.00 273.27
145.72 4.52
0.00
0.00
0.00
645.00 9.68
0.00
0.00
714.00 125.66
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
0.00
0.00
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
689.31 W
6.89
696.20 X
97.82
794.02 Y
119.10
913.12 Z
9.13
922.25
92225.00
92225.00
Rate Amount
80.00 106.64
145.72 4.52
714.00 62.83
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 28.66
2.12 17.09
645.00 9.68
426.91 W
4.27
431.18 X
60.58
491.76 Y
73.76
565.52 Z
5.66
571.18
57118.00
57118.00
Rate Amount
205.00 273.27
145.72 4.52
714.00 62.83
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 28.66
2.12 17.09
645.00 9.68
593.54 W
5.94
599.48 X
84.23
683.71 Y
102.56
786.27 Z
7.86
794.13
79413.00
79413.00
Rate Amount
80.00 106.64
145.72 4.52
714.00 125.66
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 28.66
2.12 17.09
645.00 9.68
568.42 W
5.68
574.10 X
80.66
654.76 Y
98.21
752.98 Z
7.53
760.51
76051.00
76051.00
Rate Amount
205.00 273.27
145.72 4.52
714.00 125.66
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 28.66
2.12 17.09
645.00 9.68
735.06 W
7.35
742.41 X
104.31
846.72 Y
127.01
973.73 Z
9.74
983.47
98347.00
98347.00
Rate Amount
80.00 106.64
145.72 4.52
714.00 125.66
784.00 4.70
784.00 137.98
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 70.28
2.12 17.09
645.00 9.68
669.34 W
6.69
676.03 X
94.98
771.01 Y
115.65
886.66 Z
8.87
895.53
89553.00
89553.00
Rate Amount
205.00 273.27
145.72 4.52
714.00 125.66
784.00 4.70
784.00 137.98
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 70.28
2.12 17.09
645.00 9.68
835.97 W
8.36
844.33 X
118.63
962.96 Y
144.44
1107.40 Z
11.07
1118.47
111847.00
111847.00
Rate Amount
80.00 106.64
145.72 4.52
714.00 251.33
784.00 9.41
784.00 275.97
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 70.28
2.12 17.09
645.00 9.68
1011.66 W
10.12
1021.78 X
143.56
1165.34 Y
174.80
1340.14 Z
13.40
1353.54
135354.00
135354.00
Rate Amount
205.00 273.27
145.72 4.52
714.00 251.33
784.00 9.41
784.00 275.97
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
2.12 70.28
2.12 17.09
645.00 9.68
1178.29 W
11.78
1190.07 X
167.21
1357.28 Y
203.59
1560.87 Z
15.61
1576.48
157648.00
157648.00
Rate Amount
80.00 106.64
145.72 4.52
714.00 42.13
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
645.00 9.68
360.44 W
3.60
364.04 X
51.15
415.19 Y
62.28
477.47 Z
4.77
482.25
48225.00
48225.00
Rate Amount
205.00 273.27
145.72 4.52
714.00 42.13
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
645.00 9.68
527.06 W
5.27
532.33 X
74.79
607.13 Y
91.07
698.20 Z
6.98
705.18
70518.00
70518.00
Rate Amount
80.00 106.64
145.72 4.52
645.00 9.68
714.00 84.25
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
481.26 W
4.81
486.07 X
68.29
554.36 Y
83.15
637.51 Z
6.38
643.89
64389.00
64389.00
Rate Amount
205.00 273.27
145.72 4.52
645.00 9.68
714.00 84.25
784.00 9.41
645.00 56.76
645.00 28.38
714.00 62.83
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
647.88 W
6.48
654.36 X
91.94
746.30 Y
111.94
858.24 Z
8.58
866.82
86682.00
86682.00
Rate Amount
645.00 12.90
12.90 W
0.13
13.03 X
1.83
14.86 Y
2.23
17.09 Z
0.17
17.26
1726.00
1726.00
Rate Amount
2.12 19.02
19.02 W
0.19
19.21 X
2.70
21.91 Y
3.29
25.19 Z
0.25
25.44
2544.00
2544.00
Rate Amount
2.12 13.23
13.23 W
0.13
13.36 X
1.88
15.24 Y
2.29
17.52 Z
0.18
17.70
1770.00
1770.00
Rate Amount
260.00 23085.40
187.35 166.35
4120.00 361.74
5200.00 416.00
145.72 2.45
714.00 19992.00
645.00 15480.00
2.12 285.25
1826.25 -60832.39 A
-1043.21 W
597.89
-445.32 X
8484.38
8039.07 Y
10330.72
18369.78 Z
792.02
19161.81
575.26
575.25
Rate Amount
80.00 106.64
145.72 4.52
2.12 17.09
714.00 207.77
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
645.00 9.68
543.19 W
5.43
548.61 X
77.08
625.69 Y
93.85
719.54 Z
7.20
726.73
72673.00
72673.00
Rate Amount
205.00 273.27
145.72 4.52
2.12 17.09
714.00 207.77
784.00 4.70
645.00 28.38
645.00 14.19
714.00 31.42
714.00 31.42
784.00 4.70
645.00 14.19
645.00 14.19
714.00 15.71
714.00 15.71
2.12 5.79
2.12 17.09
645.00 9.68
709.80
7.10
716.90 W
100.72
817.62 X
122.64
940.26 Y
9.40
949.67 Z
94967.00
94967.00
Rate Amount
2.12 24.80
24.80
0.25
25.05 W
3.52
28.57 X
4.29
32.86 Y
0.33
33.19 Z
3319.00
3319.00
Rate Amount
2.12 70.28
70.28
0.70
70.98 W
9.97
80.95 X
12.14
93.10 Y
0.93
94.03 Z
9403.00
9403.00
Rate Amount
714.00 357.00
645.00 483.75
840.75 W
8.41
849.16 X
119.31
968.46 Y
145.27
1113.73 Z
11.14
1124.87
249.97
249.95
Rate Amount
2.12 19.02
19.02
0.19
19.21 W
2.70
21.91 X
3.29
25.19 Y
0.25
25.44 Z
2544.00
2544.00
Rate Amount
2.12 19.29
2.12 11.30
5699.25 5.70
36.29 W
0.36
36.65 X
5.15
41.80 Y
6.27
48.07 Z
0.48
48.55
48.55
Rate Amount
230.00 632.50
145.72 36.87
714.00 357.00
4850.00 97.00
2.12 142.76
5319.25 47.87
2.12 13.23
2.12 57.05
714.00 714.00
645.00 967.50
2.12 34.17
2.12 220.48
8512.10 153.22 A
3473.65 W
33.20
3506.86 X
471.19
3978.04 Y
573.72
4551.77 Z
43.99
4595.75
2297.88
2297.90
Rate Amount
250.00 687.50
145.72 36.87
714.00 357.00
4850.00 97.00
2.12 142.76
5319.25 47.87
2.12 13.23
2.12 57.05
714.00 714.00
645.00 967.50
2.12 34.17
2.12 220.48
8512.10 153.22 A
3528.65 W
33.75
3562.41 X
478.99
4041.40 Y
583.23
4624.62 Z
44.71
4669.34
2334.67
2334.65
Rate Amount
230.00 517.50
145.72 33.08
714.00 321.30
2.12 114.10
2.12 13.23
2.12 57.05
714.00 428.40
645.00 516.00
2.12 28.66
2029.32 W
20.29
2049.61 X
287.97
2337.58 Y
350.64
2688.22 Z
26.88
2715.10
1448.05
1448.05
Rate Amount
250.00 562.50
145.72 33.08
714.00 321.30
2.12 114.10
2.12 13.23
2.12 57.05
714.00 428.40
645.00 516.00
2.12 28.66
2074.32 W
20.74
2095.06 X
294.36
2389.42 Y
358.41
2747.83 Z
27.48
2775.31
1480.16
1480.15
Rate Amount
220.00 440.00
145.72 20.40
2.12 28.66
714.00 614.04
645.00 322.50
1425.60 W
14.26
1439.86 X
202.30
1642.16 Y
246.32
1888.48 Z
18.88
1907.37
1703.01
1703.00
Rate Amount
80.00 492.80
145.72 20.40
714.00 1279.92
784.00 29.01
645.00 174.80
645.00 87.40
714.00 193.49
80.00 320.00
714.00 175.93
784.00 26.34
645.00 79.46
645.00 79.46
714.00 87.96
714.00 87.96
2.12 32.41
2.12 95.70
784.00 744.80
4007.85 W
40.08
4047.93 X
568.73
4616.67 Y
692.50
5309.17 Z
53.09
5362.26
5362.25
Rate Amount
50995.00 344.22 A
2.12 11.30
714.00 49.98
645.00 45.15
450.65 W
1.06
451.71 X
15.10
466.81 Y
18.39
485.20 Z
1.41
486.61
72090.37
72090.35
Rate Amount
73288.00 494.69 A
2.12 11.30
714.00 49.98
645.00 45.15
601.12 W
1.06
602.19 X
15.10
617.29 Y
18.39
635.68 Z
1.41
637.09
94383.70
94383.70
Rate Amount
230.00 253.00
145.72 14.72
714.00 5440.68
645.00 3270.15
2.12 171.15
9149.70 W
91.50
9241.19 X
1298.39
10539.58 Y
1580.94
12120.52 Z
121.21
12241.72
12241.70
Rate Amount
250.00 275.00
145.72 14.72
714.00 5440.68
645.00 3270.15
2.12 171.15
9171.70 W
91.72
9263.41 X
1301.51
10564.92 Y
1584.74
12149.66 Z
121.50
12271.16
12271.15
Rate Amount
700.00 262.50
645.00 2580.00
2842.50 W
28.43
2870.93 X
403.36
3274.29 Y
491.14
3765.43 Z
37.65
3803.09
905.50
905.50
Rate Amount
784.00 15.68
714.00 14.28
645.00 161.25
645.00 96.75
287.96 W
2.88
290.84 X
40.86
331.70 Y
49.76
381.46 Z
3.81
385.27
385.25
Rate Amount
690.00 7072.50
2.12 84.88
5024.15 703.38
5000.00 165.00
2.12 54.57
784.00 6036.80
645.00 4966.50
2.12 551.20
2.12 363.79
19998.63 W
199.99
20198.61 X
2837.91
23036.52 Y
3455.48
26492.00 Z
264.92
26756.92
2675.69
2675.70
Rate Amount
450.00 4612.50
2.12 84.88
5024.15 703.38
5000.00 165.00
2.12 54.57
784.00 6036.80
645.00 4966.50
2.12 551.20
2.12 363.79
17538.63 W
175.39
17714.01 X
2488.82
20202.83 Y
3030.42
23233.26 Z
232.33
23465.59
2346.56
2346.55
Rate Amount
538.00 322.80
145.72 4.37
5024.15 40.19
9563.75 11.48
784.00 262.64
714.00 239.19
645.00 216.08
645.00 216.08
714.00 239.19
714.00 117.81
784.00 105.84
2.12 28.39
1804.05 W
18.04
1822.09 X
256.00
2078.09 Y
311.71
2389.81 Z
23.90
2413.70
4827.41
4827.40
Rate Amount
650.00 780.00
145.72 8.74
5024.15 72.35
9563.75 23.91
784.00 525.28
714.00 478.38
645.00 432.15
645.00 432.15
714.00 478.38
714.00 235.62
784.00 211.68
2.12 57.05
3735.69 W
37.36
3773.05 X
530.11
4303.16 Y
645.47
4948.63 Z
49.49
4998.12
4998.12
4998.10
Rate Amount
538.00 282.45
4355.20 52.26
784.00 376.32
645.00 129.00
645.00 129.00
2.12 82.68
2.12 34.45
1086.16 W
10.86
1097.02 X
154.13
1251.16 Y
187.67
1438.83 Z
14.39
1453.22
2906.44
2906.45
Rate Amount
650.00 682.50
4355.20 104.52
784.00 564.48
645.00 193.50
645.00 193.50
2.12 165.36
2.12 68.90
1972.76 W
19.73
1992.49 X
279.95
2272.44 Y
340.87
2613.30 Z
26.13
2639.44
2639.45
Rate Amount
1800.00 945.00
4355.20 52.26
784.00 376.32
645.00 129.00
645.00 129.00
2.12 82.68
2.12 34.45
1748.71 W
17.49
1766.20 X
248.15
2014.35 Y
302.15
2316.50 Z
23.17
2339.67
4679.34
4679.35
Rate Amount
2000.00 4200.00
4355.20 209.05
784.00 1128.96
645.00 387.00
645.00 387.00
2.12 165.36
2.12 137.80
6615.17 W
66.15
6681.32 X
938.73
7620.05 Y
1143.01
8763.05 Z
87.63
8850.68
4425.34
4425.35
Rate Amount
1000.00 525.00
4355.20 52.26
784.00 376.32
645.00 129.00
645.00 129.00
2.12 82.68
2.12 34.45
1328.71 W
13.29
1342.00 X
188.55
1530.55 Y
229.58
1760.13 Z
17.60
1777.73
3555.47
3555.45
Rate Amount
1200.00 2520.00
4355.20 209.05
784.00 1128.96
645.00 387.00
645.00 387.00
2.12 165.36
2.12 137.80
4935.17 W
49.35
4984.52 X
700.33
5684.85 Y
852.73
6537.57 Z
65.38
6602.95
3301.47
3301.45
Rate Amount
250.00 375.00
645.00 1290.00
2.12 165.36
1830.36 W
18.30
1848.66 X
259.74
2108.40 Y
316.26
2424.66 Z
24.25
2448.91
244.89
244.90
Rate Amount
250.00 625.00
645.00 2257.50
2.12 248.04
3130.54 W
31.31
3161.85 X
444.24
3606.08 Y
540.91
4147.00 Z
41.47
4188.47
418.85
418.85
Rate Amount
784.00 235.20
645.00 193.50
2.12 82.68
4355.20 21.78
533.16 W
5.33
538.49 X
75.66
614.15 Y
92.12
706.27 Z
7.06
713.33
475.55
475.55
Rate Amount
784.00 313.60
645.00 258.00
2.12 32.44
604.04 W
6.04
610.08 X
85.72
695.79 Y
104.37
800.16 Z
8.00
808.16
808.15
Rate Amount
300.00 300.00
645.00 1612.50
714.00 1071.00
2.12 137.80
3121.30 W
31.21
3152.51 X
442.93
3595.44 Y
539.32
4134.76 Z
41.35
4176.10
417.61
417.60
Rate Amount
315.00 340.20
2.12 8.27
5699.25 5.70
2.12 137.80
491.97 W
4.92
496.89 X
69.81
566.70 Y
85.00
651.70 Z
6.52
658.22
639.05
639.05
Rate Amount
290.00 284.49
2.12 8.27
5699.25 5.70
2.12 137.80
436.26 W
4.36
440.62 X
61.91
502.53 Y
75.38
577.91 Z
5.78
583.69
624.93
624.95
Rate Amount
8.00 240.00
5200.00 23.40
784.00 196.00
645.00 161.25
2.12 68.90
689.55 W
6.90
696.45 X
97.85
794.30 Y
119.14
913.44 Z
9.13
922.57
30.75
30.75
Rate Amount
10.00 300.00
5200.00 31.20
784.00 196.00
645.00 161.25
2.12 68.90
757.35 W
7.57
764.92 X
107.47
872.40 Y
130.86
1003.25 Z
10.03
1013.29
33.78
33.80
Rate Amount
24.00 720.00
5200.00 39.00
784.00 196.00
645.00 161.25
2.12 68.90
1185.15 W
11.85
1197.00 X
168.18
1365.18 Y
204.78
1569.96 Z
15.70
1585.66
52.86
52.85
Rate Amount
400.00 410.00
2.12 8.37
5024.15 70.34
2.12 53.81
5000.00 16.50
784.00 784.00
645.00 645.00
2.12 35.83
2023.85
20.24
2044.09 W
287.19
2331.28 X
349.69
2680.97 Y
26.81
2707.78 Z
2707.78
2707.80
Rate Amount
690.00 707.25
2.12 8.37
5024.15 70.34
2.12 53.81
5000.00 16.50
784.00 784.00
645.00 645.00
2.12 35.83
2321.10 W
23.21
2344.31 X
329.38
2673.68 Y
401.05
3074.73 Z
30.75
3105.48
3105.50
Rate Amount
1500.00 675.00
2.12 45.75
2.12 91.50
2.12 45.75
858.00 W
8.58
866.58 X
121.75
988.33 Y
148.25
1136.58 Z
11.37
1147.95
3061.20
3061.20
Rate Amount
1800.00 810.00
2.12 45.75
2.12 91.50
2.12 45.75
993.00
9.93
1002.93 W
140.91
1143.84 X
171.58
1315.42 Y
13.15
1328.57 Z
3542.85
3542.85
Rate Amount
3209.00 1925.40
145.72 4.37
5024.15 40.19
11200.00 18.48
145.72 0.24
2.12 53.74
784.00 262.64
714.00 239.19
645.00 216.08
645.00 216.08
714.00 239.19
714.00 117.81
784.00 105.84
2.12 28.39
3467.63 W
34.68
3502.31 X
492.07
3994.38 Y
599.16
4593.54 Z
45.94
4639.48
9278.96
9278.95
Rate Amount
80.00 746.64
145.72 31.33
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3606.11 W
36.06
3642.17 X
511.72
4153.89 Y
623.08
4776.98 Z
47.77
4824.75
4824.75
Rate Amount
80.00 640.00
145.72 26.81
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3494.95 W
34.95
3529.90 X
495.95
4025.85 Y
603.88
4629.73 Z
46.30
4676.03
4676.05
Rate Amount
80.00 533.60
145.72 22.30
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3384.03 W
33.84
3417.87 X
480.21
3898.09 Y
584.71
4482.80 Z
44.83
4527.63
4527.65
Rate Amount
80.00 426.64
145.72 17.92
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3272.70 W
32.73
3305.43 X
464.41
3769.84 Y
565.48
4335.32 Z
43.35
4378.67
4378.65
Rate Amount
80.00 319.92
145.72 13.41
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3161.47 W
31.61
3193.08 X
448.63
3641.71 Y
546.26
4187.96 Z
41.88
4229.84
4229.85
Rate Amount
80.00 746.64
145.72 31.33
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4971.75 W
49.72
5021.47 X
705.52
5726.99 Y
859.05
6586.04 Z
65.86
6651.90
6651.90
Rate Amount
80.00 640.00
145.72 26.81
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4860.60 W
48.61
4909.20 X
689.74
5598.94 Y
839.84
6438.79 Z
64.39
6503.17
6503.15
Rate Amount
80.00 533.60
145.72 22.30
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4749.68 W
47.50
4797.18 X
674.00
5471.18 Y
820.68
6291.85 Z
62.92
6354.77
6354.75
Rate Amount
80.00 426.64
145.72 17.92
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4638.35 W
46.38
4684.73 X
658.20
5342.93 Y
801.44
6144.37 Z
61.44
6205.82
6205.80
Rate Amount
80.00 319.92
145.72 13.41
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4527.11 W
45.27
4572.38 X
642.42
5214.80 Y
782.22
5997.02 Z
59.97
6056.99
6057.00
Rate Amount
205.00 1913.27
145.72 31.33
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4772.73 W
47.73
4820.46 X
677.27
5497.74 Y
824.66
6322.40 Z
63.22
6385.62
6385.60
Rate Amount
205.00 1640.00
145.72 26.81
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4494.95 W
44.95
4539.90 X
637.86
5177.76 Y
776.66
5954.42 Z
59.54
6013.96
6013.95
Rate Amount
205.00 1367.35
145.72 22.30
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
4217.78 W
42.18
4259.96 X
598.52
4858.49 Y
728.77
5587.26 Z
55.87
5643.13
5643.15
Rate Amount
205.00 1092.65
145.72 17.92
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3938.71 W
39.39
3978.10 X
558.92
4537.02 Y
680.55
5217.58 Z
52.18
5269.75
5269.75
Rate Amount
205.00 819.80
145.72 13.41
2.12 57.05
714.00 963.90
784.00 25.09
645.00 144.48
645.00 72.24
714.00 159.94
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
3661.34 W
36.61
3697.95 X
519.56
4217.52 Y
632.63
4850.14 Z
48.50
4898.65
4898.65
Rate Amount
205.00 1913.27
145.72 31.33
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
6138.38 W
61.38
6199.76 X
871.07
7070.83 Y
1060.62
8131.45 Z
81.31
8212.77
8212.75
Rate Amount
205.00 1640.00
145.72 26.81
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
5860.60 W
58.61
5919.20 X
831.65
6750.85 Y
1012.63
7763.48 Z
77.63
7841.11
7841.10
Rate Amount
205.00 1367.35
145.72 22.30
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
5583.43 W
55.83
5639.26 X
792.32
6431.58 Y
964.74
7396.32 Z
73.96
7470.28
7470.30
Rate Amount
205.00 1092.65
145.72 17.92
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
5304.36 W
53.04
5357.40 X
752.71
6110.11 Y
916.52
7026.63 Z
70.27
7096.90
7096.90
Rate Amount
205.00 819.80
145.72 13.41
2.12 57.05
714.00 1927.80
784.00 50.18
645.00 288.96
645.00 144.48
714.00 319.87
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
5026.98 W
50.27
5077.25 X
713.35
5790.61 Y
868.59
6659.20 Z
66.59
6725.79
6725.80
Rate Amount
560.00 588.00
145.72 10.49
2.12 57.05
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
2060.97 W
20.61
2081.58 X
292.46
2374.04 Y
356.11
2730.15 Z
27.30
2757.45
2757.45
Rate Amount
476.00 499.80
145.72 10.49
2.12 57.05
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
714.00 239.90
10.00 40.00
2.12 41.89
5024.15 90.43
1972.79 W
19.73
1992.51 X
279.95
2272.46 Y
340.87
2613.33 Z
26.13
2639.47
2639.45
Rate Amount
290.00 284.49
2.12 8.27
5699.25 5.70
2.12 137.80
436.26
4.36
440.62
61.91
502.53
75.38
577.91
5.78
583.69
624.93
624.95
Rate Amount
10.00 10.00
2.12 8.27
5699.25 5.70
2.12 4.13
28.10 W
0.28
28.38 X
3.99
32.37 Y
4.86
37.23 Z
0.37
37.60
37.60
Rate Amount
250.00 230.00
800.00 104.00
145.72 15.74
10.00 200.00
5024.15 152.73
171.80 515.40 A
2.12 85.71
784.00 196.00
714.00 178.50
645.00 322.50
714.00 21.42
2.12 57.05
2079.05 W
15.64
2094.69 X
221.89
2316.58 Y
270.18
2586.76 Z
20.71
2607.47
2607.45
Rate Amount
250.00 2875.00
145.72 97.63
5024.15 723.48
2.12 85.71
714.00 4641.00
645.00 4192.50
645.00 2773.50
714.00 7711.20
2.12 236.46
23336.49 W
233.36
23569.85 X
3311.56
26881.42 Y
4032.21
30913.63 Z
309.14
31222.76
3122.28
3122.30
Rate Amount
2.12 456.39
784.00 235.20
645.00 193.50
714.00 107.10
2.12 60.63
1052.83 W
10.53
1063.35 X
149.40
1212.76 Y
181.91
1394.67 Z
13.95
1408.62
140.86
140.85
Rate Amount
476.00 499.80
145.72 10.49
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
10.00 40.00
2.12 41.89
2.12 108.33
2.12 144.69
1838.42 W
18.38
1856.81 X
260.88
2117.69 Y
317.65
2435.34 Z
24.35
2459.69
2459.70
Rate Amount
560.00 588.00
145.72 10.49
714.00 319.87
714.00 239.90
645.00 216.72
645.00 216.72
2.12 41.89
2.12 108.33
2.12 144.69
1926.62 W
19.27
1945.89 X
273.40
2219.28 Y
332.89
2552.18 Z
25.52
2577.70
2577.70
Rate Amount
60.00 3088.20
4950.00 2940.30
7365.15 2437.86 A
784.00 203.84
714.00 185.64
645.00 1290.00
2.00 1120.00
784.00 1050.56
714.00 478.38
645.00 3173.40
2.12 171.15
201.70 1173.89 A
2.12 171.15
17484.37 W
138.73
17623.10 X
1968.59
19591.69 Y
2396.99
21988.68 Z
183.77
22172.45
220.01
220.00
Rate Amount
115.00 1150.00
714.00 71.40
714.00 714.00
645.00 709.50
2.12 44.10
2.12 44.10
2733.09 W
27.33
2760.42 X
387.84
3148.26 Y
472.24
3620.50 Z
36.21
3656.71
365.67
365.65
Rate Amount
776.00 1086.40
187.35 2.62
4382.15 8.76
714.00 535.50
714.00 535.50
645.00 483.75
2652.54 W
26.53
2679.06 X
376.41
3055.47 Y
458.32
3513.79 Z
35.14
3548.93
35.49
35.50
Rate Amount
10.00 100.00
2.12 44.10
144.10 W
1.44
145.54 X
20.45
165.98 Y
24.90
190.88 Z
1.91
192.79
19.28
19.30
Rate Amount
10.00 100.00
2.12 55.12
155.12 W
1.55
156.67 X
22.01
178.68 Y
26.80
205.49 Z
2.05
207.54
20.75
20.75
Rate Amount
13.00 130.00
2.12 55.12
185.12 W
1.85
186.97 X
26.27
213.24 Y
31.99
245.23 Z
2.45
247.68
24.77
24.75
Rate Amount
14.00 140.00
2.12 55.12
195.12 W
1.95
197.07 X
27.69
224.76 Y
33.71
258.47 Z
2.58
261.06
26.11
26.10
Rate Amount
791.00 34804.00
150.00 6600.00
35.50 1952.50 A
61.45 614.50 A
187.35 82.43
784.00 1685.60
645.00 1044.90
2.12 114.10
46898.03 W
443.31
47341.34 X
6290.80
53632.14 Y
7659.77
61291.91 Z
587.25
61879.16
6187.92
6187.90
Rate Amount
791.00 21752.50
150.00 4125.00
187.35 51.52
35.50 1952.50 A
61.45 614.50 A
784.00 1685.60
645.00 1044.90
2.12 114.10
31340.62 W
287.74
31628.36 X
4083.12
35711.48 Y
4971.67
40683.15 Z
381.16
41064.31
4106.43
4106.45
Rate Amount
791.00 17402.00
150.00 3300.00
187.35 41.22
35.50 1952.50 A
61.45 614.50 A
784.00 846.72
714.00 571.20
645.00 696.60
2.12 114.10
25538.84 W
229.72
25768.56 X
3259.82
29028.38 Y
3969.21
32997.59 Z
304.31
33301.90
3330.19
3330.20
Rate Amount
791.00 10441.20
150.00 1980.00
187.35 24.73
35.50 1952.50 A
784.00 846.72
714.00 571.20
645.00 696.60
61.45 614.50 A
2.12 114.10
17241.55 W
146.75
17388.29 X
2082.39
19470.69 Y
2535.55
22006.24 Z
194.39
22200.63
2220.06
2220.05
Rate Amount
500.00 5500.00
2.12 28.66
2.12 57.05
61.45 614.50 A
714.00 913.92
645.00 922.35
22.00 1210.00
9246.48 W
86.32
9332.80 X
1224.92
10557.72 Y
1491.48
12049.21 Z
114.35
12163.55
1216.36
1216.35
Rate Amount
560.00 6160.00
2.12 28.66
2.12 57.05
61.45 614.50 A
714.00 913.92
645.00 922.35
22.00 1210.00
9906.48 W
92.92
9999.40 X
1318.58
11317.98 Y
1605.52
12923.50 Z
123.09
13046.59
1304.66
1304.65
Rate Amount
850.00 9350.00
2.12 28.66
2.12 57.05
61.45 614.50 A
714.00 913.92
645.00 922.35
22.00 1210.00
13096.48 W
124.82
13221.30 X
1771.26
14992.56 Y
2156.71
17149.27 Z
165.35
17314.61
1731.46
1731.45
Rate Amount
402.00 1326.60
187.35 6.18
784.00 784.00
645.00 161.25
2.12 14.33
61.45 230.44 A
22.00 1210.00
2.12 151.58
3884.38 W
36.54
3920.92 X
518.51
4439.43 Y
631.35
5070.78 Z
48.40
5119.19
163814.08
163814.10
Rate Amount
320.00 3840.00
2.12 11.58
35.50 1952.50 A
784.00 2979.20
645.00 2967.00
784.00 470.40
2.12 114.10
61.45 614.50 A
12949.27 W
103.82
13053.10 X
1473.30
14526.39 Y
1793.91
16320.30 Z
137.53
16457.83
1645.78
1645.80
Rate Amount
260.00 3120.00
2.12 11.58
35.50 1952.50 A
784.00 2979.20
645.00 2967.00
784.00 470.40
2.12 114.10
61.45 614.50 A
12229.27 W
96.62
12325.90 X
1371.12
13697.02 Y
1669.50
15366.52 Z
128.00
15494.52
1549.45
1549.45
Rate Amount
560.00 3696.00
2.12 17.19
22.00 2244.00
2.12 275.60
714.00 549.78
645.00 554.70
2.12 114.10
61.45 368.70 A
7820.07 W
74.51
7894.59 X
1057.39
8951.97 Y
1287.49
10239.46 Z
98.71
10338.17
1723.03
1723.05
Rate Amount
850.00 5610.00
2.12 17.19
22.00 2244.00
2.12 275.60
714.00 549.78
645.00 554.70
2.12 114.10
61.45 368.70 A
9734.07 W
93.65
9827.73 X
1328.99
11156.72 Y
1618.20
12774.92 Z
124.06
12898.98
2149.83
2149.85
Rate Amount
190.00 194.75
2.12 13.23
5024.15 70.34
2.12 85.71
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
794.83 W
7.95
802.78 X
112.79
915.57 Y
137.33
1052.90 Z
10.53
1063.43
1063.45
Rate Amount
332.00 664.00
102.00 204.00
104.00 1040.00
156.00 109.20
11.00 22.00
37.00 74.00
4.00 196.00
22.00 154.00
6.00 30.00
61.00 244.00
1100.00 7766.00
2.12 956.12
2.12 4018.04
2.12 4018.04
2.12 1276.77
2.12 1004.52
2.12 695.68
22472.36 W
224.72
22697.08 X
3188.94
25886.02 Y
3882.90
29768.93 Z
297.69
30066.62
4474.20
4474.20
Rate Amount
776.00 2948.80
187.35 7.12
749.00 539.28
645.00 45.15
3540.35 W
35.40
3575.75 X
502.39
4078.15 Y
611.72
4689.87 Z
46.90
4736.77
131576.94
131576.95
Rate Amount
600.00 2280.00
187.35 7.12
749.00 539.28
645.00 45.15
2871.55 W
28.72
2900.26 X
407.49
3307.75 Y
496.16
3803.91 Z
38.04
3841.95
106720.83
106720.85
Rate Amount
357.00 1356.60
187.35 7.12
772.00 29.34
2.12 19.02
749.00 539.28
645.00 45.15
1996.50 W
19.97
2016.47 X
283.31
2299.78 Y
344.97
2644.75 Z
26.45
2671.19
74199.72
74199.70
Rate Amount
700.00 2660.00
187.35 7.12
784.00 156.80
714.00 142.80
645.00 129.00
3095.72 W
30.96
3126.68 X
439.30
3565.97 Y
534.90
4100.87 Z
41.01
4141.88
115052.22
115052.20
Rate Amount
600.00 9960.00
187.35 31.10
714.00 714.00
645.00 645.00
2.12 114.10
11464.20 W
114.64
11578.84 X
1626.83
13205.67 Y
1980.85
15186.52 Z
151.87
15338.38
97078.35
97078.35
Rate Amount
357.00 5926.20
187.35 31.10
772.00 128.15
2.12 38.58
714.00 714.00
645.00 645.00
2.12 114.10
7597.13 W
75.97
7673.11 X
1078.07
8751.18 Y
1312.68
10063.85 Z
100.64
10164.49
64332.22
64332.20
Rate Amount
776.00 294.88
187.35 0.71
749.00 53.93
645.00 4.52
354.03 W
3.54
357.58 X
50.24
407.81 Y
61.17
468.99 Z
4.69
473.68
13157.78
13157.80
Rate Amount
600.00 228.00
187.35 0.71
749.00 53.93
645.00 4.52
287.15 W
2.87
290.03 X
40.75
330.78 Y
49.62
380.39 Z
3.80
384.20
10672.22
10672.20
Rate Amount
357.00 135.66
187.35 0.71
772.00 2.93
2.12 1.91
749.00 53.93
645.00 4.52
199.66 W
2.00
201.65 X
28.33
229.99 Y
34.50
264.48 Z
2.64
267.13
7420.28
7420.30
Rate Amount
791.00 4034.10
187.35 9.55
749.00 1370.67
645.00 490.20
2.12 76.07
5980.59 W
59.81
6040.40 X
848.68
6889.07 Y
1033.36
7922.43 Z
79.22
8001.66
3704.47
3704.45
Rate Amount
791.00 3480.40
187.35 8.24
749.00 1370.67
645.00 490.20
2.12 76.07
5425.58 W
54.26
5479.83 X
769.92
6249.75 Y
937.46
7187.21 Z
71.87
7259.09
3360.69
3360.70
Rate Amount
402.00 2050.20
187.35 9.55
772.00 39.37
2.12 19.29
749.00 1370.67
645.00 490.20
2.12 76.07
4055.35 W
40.55
4095.91 X
575.48
4671.38 Y
700.71
5372.09 Z
53.72
5425.81
2511.95
2511.95
Rate Amount
402.00 1768.80
187.35 8.24
772.00 33.97
2.12 19.29
749.00 1370.67
645.00 490.20
2.12 76.07
3767.24 W
37.67
3804.91 X
534.59
4339.50 Y
650.93
4990.43 Z
49.90
5040.33
2333.49
2333.50
Rate Amount
650.00 3315.00
187.35 9.55
749.00 1370.67
645.00 490.20
2.12 76.07
5261.49 W
52.61
5314.11 X
746.63
6060.74 Y
909.11
6969.85 Z
69.70
7039.55
3259.05
3259.05
Rate Amount
650.00 2860.00
187.35 8.24
749.00 1370.67
645.00 490.20
2.12 76.07
4805.18 W
48.05
4853.23 X
681.88
5535.11 Y
830.27
6365.38 Z
63.65
6429.03
2976.40
2976.40
Rate Amount
1620.00 3855.60
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
4770.98 W
47.71
4818.69 X
677.03
5495.72 Y
824.36
6320.08 Z
63.20
6383.28
2682.05
2682.05
Rate Amount
1720.00 4093.60
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
5008.98 W
50.09
5059.07 X
710.80
5769.87 Y
865.48
6635.35 Z
66.35
6701.71
2815.84
2815.85
Rate Amount
1910.00 4545.80
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
5461.18 W
54.61
5515.79 X
774.97
6290.76 Y
943.61
7234.38 Z
72.34
7306.72
3070.05
3070.05
Rate Amount
791.00 1020.39
187.35 2.42
784.00 446.88
2.12 9.37
1479.06 W
14.79
1493.85 X
209.89
1703.73 Y
255.56
1959.29 Z
19.59
1978.89
2998.31
2998.30
Rate Amount
402.00 518.58
187.35 2.42
772.00 9.96
2.12 19.02
784.00 446.88
2.12 9.37
1006.22 W
10.06
1016.28 X
142.79
1159.07 Y
173.86
1332.93 Z
13.33
1346.26
2039.79
2039.80
Rate Amount
884.00 707.20
2.12 3.86
784.00 446.88
2.12 9.37
1167.31 W
11.67
1178.98 X
165.65
1344.63 Y
201.69
1546.32 Z
15.46
1561.79
2366.34
2366.35
Rate Amount
905.00 724.00
2.12 3.86
784.00 446.88
2.12 9.37
1184.11 W
11.84
1195.95 X
168.03
1363.98 Y
204.60
1568.58 Z
15.69
1584.26
2400.40
2400.40
Rate Amount
1010.00 808.00
2.12 3.86
784.00 446.88
2.12 9.37
1268.11 W
12.68
1280.79 X
179.95
1460.74 Y
219.11
1679.85 Z
16.80
1696.65
2570.68
2570.70
Rate Amount
288.00 230.40
2.12 3.86
784.00 446.88
2.12 9.37
690.51 W
6.91
697.42 X
97.99
795.41 Y
119.31
914.72 Z
9.15
923.87
1399.80
1399.80
Rate Amount
480.00 384.00
2.12 3.86
784.00 446.88
2.12 9.37
844.11 W
8.44
852.55 X
119.78
972.33 Y
145.85
1118.18 Z
11.18
1129.36
1711.16
1711.15
Rate Amount
500.00 400.00
2.12 3.86
784.00 446.88
2.12 9.37
860.11 W
8.60
868.71 X
122.05
990.76 Y
148.61
1139.38 Z
11.39
1150.77
1743.59
1743.60
Rate Amount
490.00 392.00
2.12 3.86
784.00 446.88
2.12 9.37
852.11 W
8.52
860.63 X
120.92
981.55 Y
147.23
1128.78 Z
11.29
1140.07
1727.38
1727.40
Rate Amount
625.00 500.00
2.12 3.86
784.00 446.88
2.12 9.37
960.11 W
9.60
969.71 X
136.24
1105.95 Y
165.89
1271.84 Z
12.72
1284.56
1946.30
1946.30
Rate Amount
309.00 247.20
2.12 3.86
749.00 426.93
714.00 107.10
645.00 96.75
2.12 54.00
935.84 W
9.34
945.18 X
132.80
1077.98 Y
161.70
1239.69 Z
12.40
1252.09
1897.10
1897.10
Rate Amount
515.00 412.00
2.12 3.86
749.00 426.93
714.00 107.10
645.00 96.75
2.12 54.00
1100.63 W
11.01
1111.64 X
156.19
1267.83 Y
190.17
1458.00 Z
14.58
1472.58
2231.18
2231.20
Rate Amount
413.00 330.40
2.12 3.86
714.00 406.98
2.12 9.37
750.61 W
7.51
758.11 X
106.52
864.63 Y
129.69
994.32 Z
9.94
1004.27
1521.62
1521.60
Rate Amount
791.00 4587.80
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 10.87
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
7197.75 W
71.98
7269.73 X
1021.40
8291.13 Y
1243.67
9534.80 Z
95.35
9630.15
4458.40
4458.40
Rate Amount
791.00 3955.00
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 9.37
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
6563.45 W
65.63
6629.08 X
931.39
7560.47 Y
1134.07
8694.54 Z
86.95
8781.49
4065.50
4065.50
Rate Amount
402.00 2331.60
772.00 44.78
2.12 19.29
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 10.87
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
5005.62 W
50.06
5055.67 X
710.32
5765.99 Y
864.90
6630.89 Z
66.31
6697.20
3100.56
3100.55
Rate Amount
402.00 2010.00
772.00 38.60
2.12 19.29
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 9.37
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
4676.34 W
46.76
4723.10 X
663.60
5386.70 Y
808.01
6194.71 Z
61.95
6256.65
2896.60
2896.60
Rate Amount
650.00 3770.00
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 10.87
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
6379.95 W
63.80
6443.75 X
905.35
7349.09 Y
1102.36
8451.46 Z
84.51
8535.97
3951.84
3951.85
Rate Amount
650.00 3250.00
309.00 392.43
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 9.37
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
5858.45 W
58.58
5917.03 X
831.34
6748.38 Y
1012.26
7760.63 Z
77.61
7838.24
3628.81
3628.80
Rate Amount
1620.00 3855.60
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
4770.98 W
47.71
4818.69 X
677.03
5495.72 Y
824.36
6320.08 Z
63.20
6383.28
2682.05
2682.05
Rate Amount
515.00 515.00
309.00 -309.00
206.00 W
2.06
208.06 X
29.23
237.29 Y
35.59
272.89 Z
2.73
275.62
275.60
Rate Amount
420.00 420.00
309.00 -309.00
111.00 W
1.11
112.11 X
15.75
127.86 Y
19.18
147.04 Z
1.47
148.51
148.50
Rate Amount
309.00 -309.00
345.00 345.00
36.00 W
0.36
36.36 X
5.11
41.47 Y
6.22
47.69 Z
0.48
48.17
48.15
Rate Amount
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
80.00 -48.00
49.00 -9.80
60.00 -28.80
35.00 -2.80
237.60 W
2.38
239.98 X
33.72
273.69 Y
41.05
314.75 Z
3.15
317.89
147.17
147.15
Rate Amount
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
327.00 W
3.27
330.27 X
46.40
376.67 Y
56.50
433.17 Z
4.33
437.51
202.55
202.55
Rate Amount
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
89.40 W
0.89
90.29 X
12.69
102.98 Y
15.45
118.43 Z
1.18
119.61
55.38
55.40
Rate Amount
791.00 3164.00
187.35 7.49
309.00 305.91
196.00 117.60
290.00 139.20
784.00 1881.60
714.00 128.52
645.00 496.65
2.12 85.71
6326.69 W
63.27
6389.95 X
897.79
7287.74 Y
1093.16
8380.90 Z
83.81
8464.71
3918.85
3918.85
Rate Amount
791.00 3164.00
187.35 7.49
309.00 305.91
39.00 156.00
290.00 330.60
784.00 1881.60
714.00 128.52
645.00 496.65
2.12 85.71
6556.49 W
65.56
6622.05 X
930.40
7552.45 Y
1132.87
8685.32 Z
86.85
8772.17
4061.19
4061.20
Rate Amount
791.00 3401.30
309.00 392.43
196.00 117.60
40.00 19.20
187.35 8.06
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
6055.84 W
60.56
6116.40 X
859.35
6975.75 Y
1046.36
8022.11 Z
80.22
8102.33
3751.08
3751.10
Rate Amount
791.00 3401.30
309.00 392.43
39.00 156.00
40.00 45.60
187.35 8.06
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
6120.64 W
61.21
6181.84 X
868.55
7050.39 Y
1057.56
8107.95 Z
81.08
8189.03
3791.22
3791.20
Rate Amount
288.00 2116.80
2.12 28.66
2.12 57.05
714.00 642.60
645.00 645.00
3490.11 W
34.90
3525.01 X
495.26
4020.28 Y
603.04
4623.32 Z
46.23
4669.55
667.08
667.10
Rate Amount
430.00 3160.50
2.12 41.89
2.12 57.05
714.00 642.60
645.00 645.00
4547.04 W
45.47
4592.51 X
645.25
5237.76 Y
785.66
6023.42 Z
60.23
6083.66
869.09
869.10
Rate Amount
560.00 352.80
2.12 1.93
714.00 78.54
645.00 38.70
2.12 16.54
488.51 W
4.89
493.39 X
69.32
562.71 Y
84.41
647.12 Z
6.47
653.59
1089.32
1089.30
Rate Amount
850.00 535.50
2.12 3.86
714.00 78.54
645.00 38.70
2.12 16.54
673.13 W
6.73
679.87 X
95.52
775.39 Y
116.31
891.69 Z
8.92
900.61
1501.02
1501.00
Rate Amount
1800.00 3960.00
2.12 62.84
275.00 165.00
250.00 120.00
749.00 411.95
645.00 354.75
5074.54 W
50.75
5125.28 X
720.10
5845.38 Y
876.81
6722.19 Z
67.22
6789.41
3086.10
3086.10
Rate Amount
1600.00 3520.00
2.12 62.84
275.00 165.00
250.00 120.00
749.00 411.95
645.00 354.75
4634.54 W
46.35
4680.88 X
657.66
5338.55 Y
800.78
6139.33 Z
61.39
6200.72
2818.51
2818.50
Rate Amount
1400.00 3080.00
2.12 62.84
39.00 171.60
40.00 50.00
749.00 411.95
645.00 354.75
4131.14 W
41.31
4172.45 X
586.23
4758.68 Y
713.80
5472.48 Z
54.72
5527.20
2512.37
2512.35
Rate Amount
1000.00 2200.00
2.12 62.84
275.00 165.00
250.00 120.00
749.00 411.95
645.00 354.75
3314.54 W
33.15
3347.68 X
470.35
3818.03 Y
572.70
4390.74 Z
43.91
4434.64
2015.75
2015.75
Rate Amount
900.00 1980.00
2.12 62.84
275.00 165.00
250.00 120.00
749.00 411.95
645.00 354.75
3094.54 W
30.95
3125.48 X
439.13
3564.61 Y
534.69
4099.30 Z
40.99
4140.30
1881.95
1881.95
Rate Amount
890.00 1958.00
2.12 62.84
39.00 171.60
40.00 50.00
749.00 411.95
645.00 354.75
3009.14 W
30.09
3039.23 X
427.01
3466.24 Y
519.94
3986.18 Z
39.86
4026.04
1830.02
1830.00
Rate Amount
305.00 305.00
305.00 W
3.05
308.05 X
43.28
351.33 Y
52.70
404.03 Z
4.04
408.07
408.05
Rate Amount
300.00 300.00
300.00 W
3.00
303.00 X
42.57
345.57 Y
51.84
397.41 Z
3.97
401.38
401.40
Rate Amount
130.00 130.00
130.00 W
1.30
131.30 X
18.45
149.75 Y
22.46
172.21 Z
1.72
173.93
173.95
Rate Amount
135.00 135.00
135.00 W
1.35
136.35 X
19.16
155.51 Y
23.33
178.83 Z
1.79
180.62
180.60
Rate Amount
265.00 265.00
265.00 W
2.65
267.65 X
37.60
305.25 Y
45.79
351.04 Z
3.51
354.55
354.55
Rate Amount
70.00 70.00
70.00 W
0.70
70.70 X
9.93
80.63 Y
12.10
92.73 Z
0.93
93.66
93.65
Rate Amount
791.00 4065.74
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
7010.30 W
70.10
7080.40 X
994.80
8075.19 Y
1211.28
9286.47 Z
92.86
9379.34
4342.29
4342.30
Rate Amount
402.00 2066.28
187.35 9.63
772.00 39.68
2.12 19.02
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
5069.53 W
50.70
5120.23 X
719.39
5839.62 Y
875.94
6715.56 Z
67.16
6782.72
3140.15
3140.15
Rate Amount
650.00 3341.00
187.35 9.63
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
6285.56 W
62.86
6348.41 X
891.95
7240.36 Y
1086.05
8326.42 Z
83.26
8409.68
3893.37
3893.35
Rate Amount
791.00 4065.74
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
7247.90 W
72.48
7320.37 X
1028.51
8348.89 Y
1252.33
9601.22 Z
96.01
9697.23
4489.46
4489.45
Rate Amount
402.00 2066.28
772.00 39.68
2.12 19.02
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
5307.13 W
53.07
5360.20 X
753.11
6113.31 Y
917.00
7030.31 Z
70.30
7100.61
3287.32
3287.30
Rate Amount
650.00 3341.00
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
6523.16 W
65.23
6588.39 X
925.67
7514.06 Y
1127.11
8641.16 Z
86.41
8727.58
4040.54
4040.55
Rate Amount
791.00 3480.40
187.35 8.24
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
0.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
6237.60 W
62.38
6299.98 X
885.15
7185.13 Y
1077.77
8262.90 Z
82.63
8345.53
3863.67
3863.65
Rate Amount
402.00 1768.80
187.35 8.24
772.00 33.97
2.12 16.28
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
4576.25 W
45.76
4622.01 X
649.39
5271.40 Y
790.71
6062.11 Z
60.62
6122.74
2834.60
2834.60
Rate Amount
650.00 2860.00
187.35 8.24
250.00 352.50
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
5617.20
5545.54 W
55.46
5601.00 X
786.94
6387.94 Y
958.19
7346.13 Z
73.46
7419.59
3435.00
3435.00
Rate Amount
791.00 3480.40
187.35 8.24
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
6475.20 W
64.75
6539.95 X
918.86
7458.81 Y
1118.82
8577.64 Z
85.78
8663.41
4010.84
4010.85
Rate Amount
402.00 1768.80
772.00 33.97
2.12 16.28
187.35 8.24
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
4813.85 W
48.14
4861.99 X
683.11
5545.10 Y
831.76
6376.86 Z
63.77
6440.63
2981.77
2981.75
Rate Amount
650.00 2860.00
187.35 8.24
250.00 352.50
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
5854.80 W
58.55
5913.35 X
830.83
6744.17 Y
1011.63
7755.80 Z
77.56
7833.36
3626.55
3626.55
Rate Amount
1620.00 3855.60
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
4770.98 W
47.71
4818.69 X
677.03
5495.72 Y
824.36
6320.08 Z
63.20
6383.28
2682.05
2682.05
Rate Amount
1430.00 3403.40
2.12 62.84
749.00 389.48
645.00 387.00
2.12 76.07
4318.78 W
43.19
4361.97 X
612.86
4974.83 Y
746.22
5721.05 Z
57.21
5778.26
2427.84
2427.85
Rate Amount
791.00 261.03
187.35 0.62
60.00 21.60
61.45 22.74 A
784.00 415.52
721.50 W
6.99
728.49 X
99.16
827.65 Y
120.74
948.39 Z
9.26
957.64
191.53
191.55
Rate Amount
791.00 435.05
187.35 1.03
60.00 21.60
61.45 27.65 A
784.00 415.52
900.85 W
8.73
909.58 X
123.91
1033.50 Y
150.88
1184.37 Z
11.57
1195.94
239.19
239.20
Rate Amount
402.00 132.66
772.00 2.55
187.35 0.62
60.00 21.60
61.45 22.74 A
784.00 415.52
595.68 W
5.73
601.41 X
81.30
682.72 Y
99.00
781.71 Z
7.59
789.30
157.86
157.85
Rate Amount
402.00 221.10
772.00 4.25
187.35 1.03
60.00 21.60
61.45 27.65 A
784.00 415.52
691.15 W
6.63
697.78 X
94.15
791.94 Y
114.64
906.58 Z
8.79
915.37
183.07
183.05
Rate Amount
791.00 2531.20
187.35 6.00
784.00 588.00
714.00 714.00
645.00 322.50
784.00 78.40
2.12 71.66
4311.75 W
43.12
4354.87 X
611.86
4966.73 Y
745.01
5711.74 Z
57.12
5768.85
2622.21
2622.20
Rate Amount
430.00 137.60
306.00 82.62
72.00 118.80
7.00 14.00
2.12 1.10
2.12 17.09
402.00 12.86
22.00 44.00
714.00 128.52
645.00 116.10
784.00 86.24
2.12 5.79
764.72 W
7.65
772.37 X
108.52
880.89 Y
132.13
1013.02 Z
10.13
1023.15
511.57
511.55
Rate Amount
930.00 297.60
350.00 94.50
72.00 118.80
7.00 14.00
2.12 1.10
2.12 17.09
402.00 12.86
22.00 44.00
714.00 128.52
645.00 116.10
784.00 86.24
2.12 5.79
936.60 W
9.37
945.97 X
132.91
1078.88 Y
161.83
1240.71 Z
12.41
1253.11
626.56
626.55
Rate Amount
155.00 49.60
49.60 W
0.50
50.10 X
7.04
57.13 Y
8.57
65.70 Z
0.66
66.36
33.18
33.20
Rate Amount
500.00 160.00
160.00 W
1.60
161.60 X
22.70
184.30 Y
27.65
211.95 Z
2.12
214.07
107.04
107.05
Rate Amount
12.00 120.00
714.00 178.50
645.00 161.25
459.75 W
4.60
464.35 X
65.24
529.59 Y
79.44
609.03 Z
6.09
615.12
61.51
61.50
Rate Amount
185.00 370.00
8.00 16.00
2.12 8.54
2.12 3.31
2.00 4.00
2.12 5.79
2.12 3.31
410.95 W
4.11
415.06 X
58.32
473.37 Y
71.01
544.38 Z
5.44
549.82
274.91
274.90
Rate Amount
260.00 520.00
8.00 16.00
2.12 8.54
2.12 3.31
2.00 4.00
2.12 5.79
2.12 3.31
560.95 W
5.61
566.56 X
79.62
646.17 Y
96.93
743.10 Z
7.43
750.53
375.26
375.25
Rate Amount
340.00 680.00
8.00 16.00
2.12 8.54
2.12 3.31
2.00 4.00
2.12 5.79
2.12 3.31
720.95 W
7.21
728.16 X
102.31
830.46 Y
124.57
955.03 Z
9.55
964.58
482.29
482.30
Rate Amount
72.00 144.00
7.00 14.00
2.12 8.54
2.12 3.31
22.00 44.00
2.12 11.02
2.12 3.31
228.18 W
2.28
230.46 X
32.38
262.84 Y
39.43
302.27 Z
3.02
305.29
152.65
152.65
Rate Amount
76.00 152.00
8.00 16.00
2.12 8.54
2.12 3.31
22.00 44.00
2.12 11.02
2.12 3.31
238.18 W
2.38
240.56 X
33.80
274.36 Y
41.15
315.52 Z
3.16
318.67
159.34
159.35
Rate Amount
4750.00 783.75
4850.00 194.00
145.72 2.91
2.12 57.05
2.12 41.89
55.50 59.94 A
784.00 674.24
645.00 709.50
2523.28 W
24.63
2547.92 X
349.56
2897.48 Y
425.63
3323.11 Z
32.63
3355.74
181.00
181.00
Rate Amount
4750.00 783.75
4850.00 194.00
145.72 2.91
2.12 57.05
2.12 41.89
55.50 59.94 A
784.00 674.24
645.00 709.50
22.00 176.00
2.12 55.12
2754.40 W
26.94
2781.35 X
382.36
3163.71 Y
465.57
3629.27 Z
35.69
3664.97
197.68
197.70
Rate Amount
280.00 473.20
2.12 3.86
55.50 85.47 A
791.00 474.60
187.35 1.12
714.00 235.62
645.00 161.25
2.12 57.05
1492.17 W
14.07
1506.24 X
199.62
1705.86 Y
243.06
1948.91 Z
18.63
1967.55
1277.63
1277.65
Rate Amount
430.00 726.70
2.12 3.86
55.50 85.47 A
791.00 474.60
187.35 1.12
714.00 235.62
645.00 161.25
2.12 41.89
1730.51 W
16.45
1746.96 X
233.44
1980.40 Y
284.24
2264.64 Z
21.79
2286.44
1484.70
1484.70
Rate Amount
250.00 422.50
2.12 3.86
791.00 474.60
187.35 1.12
714.00 235.62
645.00 161.25
2.12 41.89
1340.84 W
13.41
1354.25 X
190.27
1544.52 Y
231.68
1776.20 Z
17.76
1793.97
1164.91
1164.90
Rate Amount
250.00 422.50
2.12 3.86
14.00 70.00
714.00 235.62
645.00 161.25
2.12 41.89
935.12 W
9.35
944.47 X
132.70
1077.17 Y
161.58
1238.74 Z
12.39
1251.13
812.42
812.40
Rate Amount
430.00 430.00
309.00 -309.00
121.00 W
1.21
122.21 X
17.17
139.38 Y
20.91
160.29 Z
1.60
161.89
161.90
Rate Amount
4850.00 32.50
2.12 3.86
8843.45 44.22 A
2.12 11.58
714.00 21.42
784.00 23.52
645.00 19.35
156.44 W
1.12
157.56 X
15.92
173.48 Y
19.39
192.87 Z
1.49
194.36
194.35
Rate Amount
600.00 12426.00
187.35 38.80
47.10 25.43 A
714.00 499.80
645.00 935.25
714.00 499.80
2.12 57.05
14482.13 W
144.57
14626.70 X
2051.48
16678.18 Y
2497.91
19176.09 Z
191.51
19367.60
95406.90
95406.90
Rate Amount
357.00 7393.47
187.35 38.78
47.10 25.43 A
714.00 499.80
645.00 935.25
714.00 499.80
2.12 57.05
9449.58 W
94.24
9543.83 X
1337.33
10881.16 Y
1628.36
12509.52 Z
124.84
12634.36
62238.23
62238.25
Rate Amount
135.00 135.00
75.00 60.00
2.12 5.79
714.00 99.96
645.00 58.05
358.80 W
3.59
362.39 X
50.92
413.30 Y
62.00
475.30 Z
4.75
480.05
48.00
48.00
Rate Amount
80.00 80.00
60.00 48.00
2.12 5.79
714.00 99.96
645.00 58.05
291.80 W
2.92
294.72 X
41.41
336.12 Y
50.42
386.54 Z
3.87
390.41
39.04
39.05
Rate Amount
56.00 56.00
45.00 27.00
2.12 3.86
714.00 99.96
645.00 58.05
244.87 W
2.45
247.32 X
34.75
282.07 Y
42.31
324.37 Z
3.24
327.62
32.76
32.75
Rate Amount
49.00 49.00
35.00 14.00
2.12 1.93
714.00 57.12
122.05 W
1.22
123.27 X
17.32
140.59 Y
21.09
161.68 Z
1.62
163.29
16.33
16.35
Rate Amount
230.00 230.00
75.00 60.00
2.12 5.79
714.00 99.96
645.00 58.05
453.80 W
4.54
458.34 X
64.40
522.73 Y
78.41
601.14 Z
6.01
607.15
60.72
60.70
Rate Amount
180.00 180.00
60.00 48.00
2.12 5.79
714.00 99.96
645.00 58.05
391.80 W
3.92
395.72 X
55.60
451.31 Y
67.70
519.01 Z
5.19
524.20
52.42
52.40
Rate Amount
110.00 110.00
45.00 27.00
2.12 3.86
714.00 99.96
645.00 58.05
298.87 W
2.99
301.86 X
42.41
344.27 Y
51.64
395.91 Z
3.96
399.87
39.99
40.00
Rate Amount
90.00 90.00
35.00 14.00
2.12 1.93
714.00 57.12
163.05 W
1.63
164.68 X
23.14
187.82 Y
28.17
215.99 Z
2.16
218.15
21.81
21.80
Rate Amount
125.00 125.00
76.00 60.80
2.12 7.72
714.00 99.96
645.00 58.05
351.53 W
3.52
355.04 X
49.88
404.93 Y
60.74
465.66 Z
4.66
470.32
47.03
47.05
Rate Amount
90.00 90.00
62.00 49.60
2.12 5.79
714.00 99.96
645.00 58.05
303.40 W
3.03
306.43 X
43.05
349.49 Y
52.42
401.91 Z
4.02
405.93
40.59
40.60
Rate Amount
65.00 65.00
49.00 29.40
2.12 3.86
714.00 99.96
645.00 58.05
256.27 W
2.56
258.83 X
36.37
295.20 Y
44.28
339.48 Z
3.39
342.87
34.29
34.30
Rate Amount
55.00 55.00
32.00 12.80
2.12 1.93
714.00 57.12
126.85 W
1.27
128.12 X
18.00
146.12 Y
21.92
168.04 Z
1.68
169.72
16.97
16.95
Rate Amount
335.00 335.00
62.00 49.60
2.12 5.79
714.00 99.96
645.00 90.30
580.65 W
5.81
586.45 X
82.40
668.85 Y
100.33
769.18 Z
7.69
776.87
77.69
77.70
Rate Amount
62.00 49.60
2.12 5.79
714.00 99.96
645.00 90.30
545.65 W
5.46
551.10 X
77.43
628.53 Y
94.28
722.81 Z
7.23
730.04
73.00
73.00
Rate Amount
235.00 235.00
62.00 49.60
2.12 5.79
714.00 99.96
645.00 90.30
480.65 W
4.81
485.45 X
68.21
553.66 Y
83.05
636.71 Z
6.37
643.08
64.31
64.30
Rate Amount
200.00 200.00
49.00 29.40
2.12 5.79
714.00 99.96
645.00 90.30
425.45 W
4.25
429.70 X
60.37
490.08 Y
73.51
563.59 Z
5.64
569.22
56.92
56.90
Rate Amount
140.00 1400.00
76.00 60.80
2.12 5.79
714.00 285.60
645.00 129.00
1881.19 W
18.81
1900.00 X
266.95
2166.95 Y
325.04
2491.99 Z
24.92
2516.91
251.69
251.70
Rate Amount
120.00 1200.00
76.00 60.80
2.12 5.79
714.00 285.60
645.00 129.00
1681.19 W
16.81
1698.00 X
238.57
1936.57 Y
290.49
2227.05 Z
22.27
2249.32
224.93
224.95
Rate Amount
100.00 1000.00
62.00 49.60
2.12 5.79
714.00 285.60
645.00 129.00
1469.99 W
14.70
1484.69 X
208.60
1693.29 Y
253.99
1947.28 Z
19.47
1966.75
196.68
196.70
Rate Amount
160.00 1600.00
76.00 60.80
2.12 5.79
714.00 285.60
645.00 129.00
2081.19 W
20.81
2102.00 X
295.33
2397.33 Y
359.60
2756.93 Z
27.57
2784.50
278.45
278.45
Rate Amount
140.00 1400.00
76.00 60.80
2.12 5.79
714.00 285.60
645.00 129.00
1881.19 W
18.81
1900.00 X
266.95
2166.95 Y
325.04
2491.99 Z
24.92
2516.91
251.69
251.70
Rate Amount
120.00 1200.00
62.00 49.60
2.12 5.79
714.00 285.60
645.00 129.00
1669.99 W
16.70
1686.69 X
236.98
1923.67 Y
288.55
2212.22 Z
22.12
2234.34
223.43
223.45
Rate Amount
40.00 40.00
32.00 9.60
2.12 3.86
714.00 99.96
645.00 58.05
211.47 W
2.11
213.58 X
30.01
243.59 Y
36.54
280.13 Z
2.80
282.93
282.95
Rate Amount
40.00 40.00
32.00 9.60
2.12 3.86
714.00 99.96
645.00 58.05
211.47 W
2.11
213.58 X
30.01
243.59 Y
36.54
280.13 Z
2.80
282.93
282.95
Rate Amount
52.00 52.00
32.00 9.60
2.12 3.86
714.00 99.96
645.00 58.05
223.47 W
2.23
225.70 X
31.71
257.41 Y
38.61
296.03 Z
2.96
298.99
299.00
Rate Amount
90.00 900.00
48.00 57.60
5.00 200.00
2.12 13.50
714.00 178.50
1349.60 W
13.50
1363.10 X
191.52
1554.62 Y
233.19
1787.81 Z
17.88
1805.69
180.57
180.55
Rate Amount
80.00 800.00
48.00 48.00
5.00 200.00
2.12 13.50
714.00 178.50
1240.00 W
12.40
1252.40 X
175.96
1428.37 Y
214.26
1642.62 Z
16.43
1659.05
165.90
165.90
Rate Amount
43.00 430.00
49.00 49.00
2.12 7.72
714.00 71.40
558.12 W
5.58
563.70 X
79.20
642.90 Y
96.43
739.33 Z
7.39
746.73
74.67
74.65
Rate Amount
34.00 340.00
49.00 39.20
2.12 5.79
714.00 71.40
456.39 W
4.56
460.95 X
64.76
525.72 Y
78.86
604.57 Z
6.05
610.62
61.06
61.05
Rate Amount
29.00 290.00
49.00 29.40
2.12 5.79
714.00 71.40
396.59 W
3.97
400.55 X
56.28
456.83 Y
68.52
525.36 Z
5.25
530.61
53.06
53.05
Rate Amount
20.00 200.00
49.00 29.40
2.12 5.79
714.00 57.12
292.31 W
2.92
295.23 X
41.48
336.71 Y
50.51
387.22 Z
3.87
391.09
39.11
39.10
Rate Amount
62.00 620.00
2.12 13.50
714.00 178.50
812.00 W
8.12
820.12 X
115.23
935.35 Y
140.30
1075.65 Z
10.76
1086.41
108.64
108.65
Rate Amount
49.00 490.00
36.00 32.40
2.12 7.72
714.00 85.68
615.80 W
6.16
621.95 X
87.38
709.34 Y
106.40
815.74 Z
8.16
823.90
82.39
82.40
Rate Amount
39.00 390.00
36.00 32.40
2.12 7.72
714.00 85.68
515.80 W
5.16
520.95 X
73.19
594.15 Y
89.12
683.27 Z
6.83
690.10
69.01
69.00
Rate Amount
20.00 200.00
36.00 14.40
2.12 5.79
714.00 42.84
263.03 W
2.63
265.66 X
37.32
302.98 Y
45.45
348.43 Z
3.48
351.91
35.19
35.20
Rate Amount
15.00 150.00
36.00 14.40
2.12 3.86
714.00 42.84
211.10 W
2.11
213.21 X
29.96
243.17 Y
36.47
279.64 Z
2.80
282.44
28.24
28.25
Rate Amount
12.00 120.00
36.00 14.40
2.12 3.86
714.00 42.84
181.10 W
1.81
182.91 X
25.70
208.61 Y
31.29
239.90 Z
2.40
242.30
24.23
24.25
Rate Amount
128.00 128.00
36.00 28.80
2.12 3.86
714.00 57.12
217.78 W
2.18
219.96 X
30.90
250.86 Y
37.63
288.49 Z
2.88
291.37
29.14
29.15
Rate Amount
108.00 108.00
36.00 25.20
2.12 3.86
714.00 57.12
194.18 W
1.94
196.12 X
27.55
223.68 Y
33.55
257.23 Z
2.57
259.80
25.98
26.00
Rate Amount
79.00 79.00
36.00 25.20
2.12 3.86
714.00 57.12
165.18 W
1.65
166.83 X
23.44
190.27 Y
28.54
218.81 Z
2.19
221.00
22.10
22.10
Rate Amount
35.00 350.00
49.00 19.60
2.12 1.93
714.00 71.40
442.93 W
4.43
447.36 X
62.85
510.21 Y
76.53
586.74 Z
5.87
592.61
59.26
59.25
Rate Amount
30.00 300.00
36.00 14.40
2.12 1.93
714.00 71.40
387.73 W
3.88
391.61 X
55.02
446.63 Y
66.99
513.62 Z
5.14
518.76
51.88
51.90
Rate Amount
25.00 250.00
36.00 14.40
2.12 1.93
714.00 71.40
337.73 W
3.38
341.11 X
47.93
389.03 Y
58.35
447.39 Z
4.47
451.86
45.19
45.20
Rate Amount
57.00 570.00
36.00 21.60
2.12 1.93
714.00 71.40
664.93 W
6.65
671.58 X
94.36
765.94 Y
114.89
880.83 Z
8.81
889.63
88.96
88.95
Rate Amount
310.00 310.00
300.00 240.00
2.12 5.79
714.00 99.96
645.00 58.05
713.80 W
7.14
720.94 X
101.29
822.23 Y
123.33
945.56 Z
9.46
955.02
95.50
95.50
Rate Amount
280.00 280.00
250.00 200.00
2.12 5.79
714.00 99.96
645.00 58.05
643.80 W
6.44
650.24 X
91.36
741.59 Y
111.24
852.83 Z
8.53
861.36
86.14
86.15
Rate Amount
180.00 180.00
230.00 138.00
2.12 3.86
714.00 99.96
645.00 58.05
479.87 W
4.80
484.67 X
68.10
552.76 Y
82.91
635.68 Z
6.36
642.03
64.20
64.20
Rate Amount
150.00 150.00
150.00 60.00
2.12 1.93
714.00 57.12
269.05 W
2.69
271.74 X
38.18
309.92 Y
46.49
356.41 Z
3.56
359.97
36.00
36.00
Rate Amount
375.00 375.00
300.00 240.00
2.12 5.79
714.00 99.96
645.00 58.05
778.80 W
7.79
786.59 X
110.52
897.10 Y
134.57
1031.67 Z
10.32
1041.98
104.20
104.20
Rate Amount
275.00 275.00
250.00 200.00
2.12 5.79
714.00 99.96
645.00 58.05
638.80 W
6.39
645.19 X
90.65
735.83 Y
110.38
846.21 Z
8.46
854.67
85.47
85.45
Rate Amount
230.00 230.00
230.00 138.00
2.12 3.86
714.00 99.96
645.00 58.05
529.87 W
5.30
535.17 X
75.19
610.36 Y
91.55
701.91 Z
7.02
708.93
70.89
70.90
Rate Amount
1309.00 1309.00
220.00 220.00
2.12 7.72
784.00 109.76
645.00 64.50
1710.98 W
17.11
1728.09 X
242.80
1970.88 Y
295.63
2266.52 Z
22.67
2289.18
228.92
228.90
Rate Amount
775.00 775.00
220.00 220.00
2.12 7.72
784.00 109.76
645.00 64.50
1176.98 W
11.77
1188.75 X
167.02
1355.77 Y
203.36
1559.13 Z
15.59
1574.72
157.47
157.45
Rate Amount
997.00 997.00
170.00 136.00
2.12 5.79
784.00 109.76
645.00 64.50
1313.05 W
13.13
1326.18 X
186.33
1512.51 Y
226.88
1739.38 Z
17.39
1756.78
175.68
175.70
Rate Amount
625.00 625.00
170.00 136.00
2.12 5.79
784.00 109.76
645.00 64.50
941.05 W
9.41
950.46 X
133.54
1084.00 Y
162.60
1246.60 Z
12.47
1259.06
125.91
125.90
Rate Amount
838.00 838.00
140.00 84.00
2.12 5.79
784.00 109.76
645.00 64.50
1102.05 W
11.02
1113.07 X
156.39
1269.45 Y
190.42
1459.87 Z
14.60
1474.47
147.45
147.45
Rate Amount
380.00 380.00
140.00 84.00
2.12 5.79
784.00 109.76
645.00 64.50
644.05 W
6.44
650.49 X
91.39
741.88 Y
111.28
853.16 Z
8.53
861.70
86.17
86.15
Rate Amount
155.00 155.00
95.00 38.00
2.12 3.86
784.00 62.72
259.58 W
2.60
262.17 X
36.84
299.01 Y
44.85
343.86 Z
3.44
347.30
34.73
34.75
Rate Amount
2610.00 2610.00
170.00 136.00
2.12 5.79
784.00 109.76
645.00 90.30
2951.85 W
29.52
2981.37 X
418.88
3400.25 Y
510.04
3910.29 Z
39.10
3949.39
394.94
394.95
Rate Amount
2300.00 2300.00
170.00 136.00
2.12 5.79
784.00 109.76
645.00 90.30
2641.85 W
26.42
2668.27 X
374.89
3043.16 Y
456.47
3499.63 Z
35.00
3534.63
353.46
353.45
Rate Amount
2090.00 2090.00
170.00 136.00
2.12 5.79
784.00 109.76
645.00 90.30
2431.85 W
24.32
2456.17 X
345.09
2801.26 Y
420.19
3221.45 Z
32.21
3253.66
325.37
325.35
Rate Amount
1870.00 1870.00
140.00 84.00
2.12 5.79
784.00 109.76
645.00 90.30
2159.85 W
21.60
2181.45 X
306.49
2487.94 Y
373.19
2861.13 Z
28.61
2889.74
288.97
288.95
Rate Amount
257.00 2570.00
140.00 140.00
2.12 9.65
784.00 78.40
2798.05 W
27.98
2826.03 X
397.06
3223.08 Y
483.46
3706.55 Z
37.07
3743.61
374.36
374.35
Rate Amount
205.00 2050.00
140.00 112.00
2.12 5.79
784.00 78.40
2246.19 W
22.46
2268.65 X
318.75
2587.39 Y
388.11
2975.50 Z
29.76
3005.26
300.53
300.55
Rate Amount
154.00 1540.00
140.00 112.00
2.12 5.79
784.00 78.40
1736.19 W
17.36
1753.55 X
246.37
1999.92 Y
299.99
2299.91 Z
23.00
2322.91
232.29
232.30
Rate Amount
103.00 1030.00
140.00 84.00
2.12 5.79
784.00 78.40
1198.19 W
11.98
1210.17 X
170.03
1380.20 Y
207.03
1587.23 Z
15.87
1603.10
160.31
160.30
Rate Amount
185.00 1850.00
100.00 90.00
2.12 7.72
784.00 94.08
2041.80 W
20.42
2062.21 X
289.74
2351.96 Y
352.79
2704.75 Z
27.05
2731.80
273.18
273.20
Rate Amount
175.00 1750.00
100.00 90.00
2.12 7.72
784.00 94.08
1941.80 W
19.42
1961.21 X
275.55
2236.77 Y
335.51
2572.28 Z
25.72
2598.00
259.80
259.80
Rate Amount
400.00 400.00
784.00 133.28
2.12 7.72
541.00 W
5.41
546.41 X
76.77
623.18 Y
93.48
716.65 Z
7.17
723.82
723.80
Rate Amount
310.00 310.00
784.00 133.28
2.12 7.72
451.00 W
4.51
455.51 X
64.00
519.51 Y
77.93
597.43 Z
5.97
603.41
603.40
Rate Amount
610.00 610.00
784.00 133.28
2.12 7.72
751.00 W
7.51
758.51 X
106.57
865.08 Y
129.76
994.84 Z
9.95
1004.79
1004.80
Rate Amount
57.00 57.00
784.00 133.28
2.12 7.72
198.00 W
1.98
199.98 X
28.10
228.07 Y
34.21
262.28 Z
2.62
264.91
264.90
Rate Amount
88.00 88.00
784.00 133.28
2.12 7.72
229.00 W
2.29
231.29 X
32.50
263.78 Y
39.57
303.35 Z
3.03
306.38
306.40
Rate Amount
93.00 93.00
784.00 133.28
2.12 7.72
234.00 W
2.34
236.34 X
33.21
269.54 Y
40.43
309.97 Z
3.10
313.07
313.05
Rate Amount
108.00 108.00
784.00 133.28
2.12 7.72
249.00 W
2.49
251.49 X
35.33
286.82 Y
43.02
329.84 Z
3.30
333.14
333.15
Rate Amount
36.00 360.00
2.12 5.79
784.00 109.76
475.55 W
4.76
480.30 X
67.48
547.79 Y
82.17
629.95 Z
6.30
636.25
63.63
63.65
Rate Amount
144.00 1440.00
100.00 40.00
2.12 5.79
784.00 47.04
1532.83 W
15.33
1548.16 X
217.52
1765.67 Y
264.85
2030.52 Z
20.31
2050.83
205.08
205.10
Rate Amount
133.00 1330.00
100.00 40.00
2.12 1.93
784.00 47.04
1418.97 W
14.19
1433.16 X
201.36
1634.52 Y
245.18
1879.70 Z
18.80
1898.49
189.85
189.85
Rate Amount
103.00 1030.00
100.00 40.00
2.12 1.93
784.00 47.04
1118.97 W
11.19
1130.16 X
158.79
1288.95 Y
193.34
1482.29 Z
14.82
1497.11
149.71
149.70
Rate Amount
77.00 770.00
100.00 20.00
2.12 5.79
784.00 23.52
819.31 W
8.19
827.50 X
116.26
943.76 Y
141.56
1085.33 Z
10.85
1096.18
109.62
109.60
Rate Amount
686.00 6860.00
140.00 84.00
2.12 7.72
714.00 714.00
7665.72 W
76.66
7742.37 X
1087.80
8830.18 Y
1324.53
10154.70 Z
101.55
10256.25
1025.63
1025.65
Rate Amount
560.00 5600.00
140.00 84.00
2.12 2.20
714.00 714.00
6400.20 W
64.00
6464.21 X
908.22
7372.43 Y
1105.86
8478.29 Z
84.78
8563.08
856.31
856.30
Rate Amount
45.00 450.00
100.00 40.00
2.12 1.93
784.00 78.40
570.33 W
5.70
576.03 X
80.93
656.97 Y
98.54
755.51 Z
7.56
763.06
76.31
76.30
Rate Amount
126.00 1260.00
140.00 56.00
2.12 1.93
784.00 78.40
1396.33 W
13.96
1410.29 X
198.15
1608.44 Y
241.27
1849.70 Z
18.50
1868.20
186.82
186.80
Rate Amount
100.00 1000.00
100.00 40.00
2.12 1.93
784.00 78.40
1120.33 W
11.20
1131.53 X
158.98
1290.51 Y
193.58
1484.09 Z
14.84
1498.93
149.89
149.90
Rate Amount
95.00 950.00
100.00 40.00
2.12 1.93
784.00 78.40
1070.33 W
10.70
1081.03 X
151.89
1232.92 Y
184.94
1417.86 Z
14.18
1432.03
143.20
143.20
Rate Amount
740.00 740.00
100.00 80.00
2.12 3.86
784.00 62.72
886.58 W
8.87
895.44 X
125.81
1021.25 Y
153.19
1174.44 Z
11.74
1186.19
118.62
118.60
Rate Amount
670.00 670.00
95.00 66.50
2.12 3.86
784.00 62.72
803.08 W
8.03
811.11 X
113.96
925.07 Y
138.76
1063.83 Z
10.64
1074.47
107.45
107.45
Rate Amount
575.00 575.00
95.00 66.50
2.12 3.86
784.00 62.72
708.08 W
7.08
715.16 X
100.48
815.64 Y
122.35
937.98 Z
9.38
947.36
94.74
94.75
Rate Amount
470.00 470.00
784.00 133.28
2.12 7.72
611.00 W
6.11
617.11 X
86.70
703.81 Y
105.57
809.38 Z
8.09
817.48
817.50
Rate Amount
500.00 500.00
784.00 133.28
2.12 7.72
641.00 W
6.41
647.41 X
90.96
738.37 Y
110.76
849.12 Z
8.49
857.61
857.60
Rate Amount
63.00 63.00
784.00 133.28
2.12 7.72
204.00 W
2.04
206.04 X
28.95
234.98 Y
35.25
270.23 Z
2.70
272.94
272.95
Rate Amount
73.00 73.00
784.00 133.28
2.12 7.72
214.00 W
2.14
216.14 X
30.37
246.50 Y
36.98
283.48 Z
2.83
286.31
286.30
Rate Amount
99.00 99.00
784.00 133.28
2.12 7.72
240.00 W
2.40
242.40 X
34.06
276.45 Y
41.47
317.92 Z
3.18
321.10
321.10
Rate Amount
125.00 125.00
784.00 133.28
2.12 7.72
266.00 W
2.66
268.66 X
37.75
306.40 Y
45.96
352.36 Z
3.52
355.89
355.90
Rate Amount
80.00 800.00
2.12 5.79
784.00 109.76
915.55 W
9.16
924.70 X
129.92
1054.62 Y
158.19
1212.82 Z
12.13
1224.95
122.49
122.50
Rate Amount
160.00 1600.00
100.00 40.00
2.12 5.79
784.00 47.04
1692.83 W
16.93
1709.76 X
240.22
1949.98 Y
292.50
2242.47 Z
22.42
2264.90
226.49
226.50
Rate Amount
140.00 1400.00
100.00 40.00
2.12 1.93
784.00 47.04
1488.97 W
14.89
1503.86 X
211.29
1715.15 Y
257.27
1972.42 Z
19.72
1992.15
199.21
199.20
Rate Amount
125.00 1250.00
100.00 40.00
2.12 1.93
784.00 47.04
1338.97 W
13.39
1352.36 X
190.01
1542.37 Y
231.35
1773.72 Z
17.74
1791.46
179.15
179.15
Rate Amount
90.00 900.00
180.00 72.00
2.12 1.93
784.00 78.40
1052.33 W
10.52
1062.85 X
149.33
1212.18 Y
181.83
1394.01 Z
13.94
1407.95
140.80
140.80
Rate Amount
140.00 1400.00
180.00 72.00
2.12 1.93
784.00 78.40
1552.33 W
15.52
1567.85 X
220.28
1788.14 Y
268.22
2056.36 Z
20.56
2076.92
207.69
207.70
Rate Amount
120.00 1200.00
180.00 72.00
2.12 1.93
784.00 78.40
1352.33 W
13.52
1365.85 X
191.90
1557.75 Y
233.66
1791.42 Z
17.91
1809.33
180.93
180.95
Rate Amount
100.00 1000.00
180.00 72.00
2.12 1.93
784.00 78.40
1152.33 W
11.52
1163.85 X
163.52
1327.37 Y
199.11
1526.48 Z
15.26
1541.74
154.17
154.15
Rate Amount
560.00 560.00
300.00 300.00
2.12 7.72
784.00 109.76
645.00 58.05
1035.53 W
10.36
1045.88 X
146.95
1192.83 Y
178.92
1371.75 Z
13.72
1385.47
138.55
138.55
Rate Amount
393.00 393.00
300.00 300.00
2.12 7.72
784.00 109.76
645.00 58.05
868.53 W
8.69
877.21 X
123.25
1000.46 Y
150.07
1150.53 Z
11.51
1162.03
116.20
116.20
Rate Amount
393.00 393.00
290.00 232.00
2.12 5.79
784.00 109.76
645.00 58.05
798.60 W
7.99
806.58 X
113.32
919.91 Y
137.99
1057.89 Z
10.58
1068.47
106.85
106.85
Rate Amount
324.00 324.00
290.00 232.00
2.12 5.79
784.00 109.76
645.00 58.05
729.60 W
7.30
736.89 X
103.53
840.43 Y
126.06
966.49 Z
9.66
976.16
97.62
97.60
Rate Amount
270.00 270.00
290.00 232.00
2.12 5.79
784.00 109.76
645.00 58.05
675.60 W
6.76
682.35 X
95.87
778.22 Y
116.73
894.96 Z
8.95
903.91
90.39
90.40
Rate Amount
275.00 275.00
240.00 144.00
2.12 3.86
784.00 109.76
645.00 58.05
590.67 W
5.91
596.58 X
83.82
680.39 Y
102.06
782.45 Z
7.82
790.28
79.03
79.05
Rate Amount
226.00 226.00
240.00 144.00
2.12 3.86
784.00 109.76
645.00 58.05
541.67 W
5.42
547.09 X
76.87
623.95 Y
93.59
717.54 Z
7.18
724.72
72.47
72.45
Rate Amount
196.00 196.00
240.00 144.00
2.12 3.86
784.00 109.76
645.00 58.05
511.67 W
5.12
516.79 X
72.61
589.39 Y
88.41
677.80 Z
6.78
684.58
68.46
68.45
Rate Amount
147.00 1470.00
180.00 72.00
2.12 11.58
784.00 392.00
1945.58 W
19.46
1965.03 X
276.09
2241.12 Y
336.17
2577.29 Z
25.77
2603.06
260.31
260.30
Rate Amount
128.00 1280.00
180.00 72.00
2.12 11.58
784.00 392.00
1755.58 W
17.56
1773.13 X
249.12
2022.26 Y
303.34
2325.59 Z
23.26
2348.85
234.89
234.90
Rate Amount
580.00 580.00
240.00 192.00
2.12 9.37
784.00 98.00
879.37 W
8.79
888.16 X
124.79
1012.95 Y
151.94
1164.89 Z
11.65
1176.54
117.65
117.65
Rate Amount
481.00 481.00
240.00 192.00
2.12 9.37
784.00 98.00
780.37 W
7.80
788.17 X
110.74
898.91 Y
134.84
1033.75 Z
10.34
1044.09
104.41
104.40
Rate Amount
383.00 383.00
240.00 192.00
2.12 5.79
784.00 98.00
678.79 W
6.79
685.58 X
96.32
781.90 Y
117.28
899.18 Z
8.99
908.18
90.82
90.80
Rate Amount
304.00 304.00
240.00 192.00
2.12 5.79
784.00 62.72
564.51 W
5.65
570.15 X
80.11
650.26 Y
97.54
747.80 Z
7.48
755.28
75.53
75.55
Rate Amount
226.00 226.00
240.00 144.00
2.12 5.79
784.00 62.72
438.51 W
4.39
442.89 X
62.23
505.12 Y
75.77
580.89 Z
5.81
586.70
58.67
58.65
Rate Amount
48.00 480.00
2.12 13.50
714.00 178.50
672.00 W
6.72
678.72 X
95.36
774.09 Y
116.11
890.20 Z
8.90
899.10
89.91
89.90
Rate Amount
142.00 1420.00
180.00 72.00
2.12 11.58
784.00 54.88
645.00 32.25
1590.71 W
15.91
1606.61 X
225.73
1832.34 Y
274.85
2107.19 Z
21.07
2128.26
212.83
212.85
Rate Amount
324.00 324.00
180.00 72.00
2.12 5.79
784.00 47.04
448.83 W
4.49
453.32 X
63.69
517.01 Y
77.55
594.56 Z
5.95
600.50
60.05
60.05
Rate Amount
275.00 275.00
180.00 72.00
2.12 3.86
784.00 47.04
397.90 W
3.98
401.88 X
56.46
458.34 Y
68.75
527.09 Z
5.27
532.36
53.24
53.25
Rate Amount
231.00 231.00
160.00 64.00
2.12 3.86
784.00 47.04
345.90 W
3.46
349.36 X
49.08
398.44 Y
59.77
458.21 Z
4.58
462.79
46.28
46.30
Rate Amount
20.00 200.00
180.00 36.00
2.12 5.79
784.00 23.52
265.31 W
2.65
267.96 X
37.65
305.61 Y
45.84
351.45 Z
3.51
354.97
35.50
35.50
Rate Amount
40.00 400.00
180.00 36.00
2.12 5.79
784.00 23.52
465.31 W
4.65
469.96 X
66.03
535.99 Y
80.40
616.39 Z
6.16
622.55
62.26
62.25
Rate Amount
33.00 330.00
180.00 72.00
2.12 1.93
784.00 78.40
482.33 W
4.82
487.15 X
68.44
555.60 Y
83.34
638.94 Z
6.39
645.33
64.53
64.55
Rate Amount
195.00 195.00
215.00 215.00
784.00 133.28
2.12 9.65
552.93 W
5.53
558.46 X
78.46
636.92 Y
95.54
732.46 Z
7.32
739.78
739.80
Rate Amount
100.00 200.00
2.12 5.79
2.12 3.03
208.82 W
2.09
210.91 X
29.63
240.54 Y
36.08
276.62 Z
2.77
279.39
139.69
139.70
Rate Amount
240.00 10512.00
60.00 720.00
70.00 2810.50
58.00 227.36
10.00 220.00
22.00 396.00
5.00 96.35
75.00 361.50
90.00 52.56
70.00 551.60
38.00 167.20
32.00 14.08
2.12 110.24
2.12 275.60
784.00 5150.88
714.00 2032.76
714.00 781.83
645.00 4943.93
29424.38 W
294.24
29718.63 X
4175.47
33894.09 Y
5084.11
38978.21 Z
389.78
39367.99
1797.63
1797.65
Rate Amount
140.00 6132.00
60.00 720.00
70.00 2810.50
58.00 227.36
10.00 220.00
22.00 396.00
5.00 96.35
75.00 361.50
90.00 52.56
70.00 551.60
38.00 167.20
32.00 14.08
2.12 110.24
2.12 275.60
784.00 5150.88
714.00 2032.76
714.00 781.83
645.00 4943.93
25044.38 W
250.44
25294.83 X
3553.92
28848.75 Y
4327.31
33176.06 Z
331.76
33507.82
1530.04
1530.05
Rate Amount
270.00 11826.00
60.00 720.00
70.00 2810.50
58.00 227.36
10.00 220.00
22.00 396.00
5.00 96.35
75.00 361.50
90.00 52.56
70.00 551.60
38.00 167.20
32.00 14.08
2.12 110.24
2.12 275.60
784.00 5150.88
714.00 2032.76
714.00 781.83
645.00 4943.93
30738.38 W
307.38
31045.77 X
4361.93
35407.70 Y
5311.15
40718.85 Z
407.19
41126.04
1877.90
1877.90
Rate Amount
220.00 9636.00
60.00 720.00
70.00 2810.50
58.00 227.36
10.00 220.00
22.00 396.00
5.00 96.35
75.00 361.50
90.00 52.56
70.00 551.60
38.00 167.20
32.00 14.08
2.12 110.24
2.12 275.60
784.00 5150.88
714.00 2032.76
714.00 781.83
645.00 4943.93
28548.38 W
285.48
28833.87 X
4051.16
32885.03 Y
4932.75
37817.78 Z
378.18
38195.96
1744.11
1744.10
Rate Amount
215.00 9417.00
60.00 720.00
70.00 2810.50
58.00 227.36
10.00 220.00
22.00 396.00
5.00 96.35
75.00 361.50
90.00 52.56
70.00 551.60
38.00 167.20
32.00 14.08
2.12 110.24
2.12 275.60
784.00 5150.88
714.00 2032.76
714.00 781.83
645.00 4943.93
28329.38 W
283.29
28612.68 X
4020.08
32632.76 Y
4894.91
37527.67 Z
375.28
37902.95
1730.73
1730.75
Rate Amount
20.00 200.00
40.00 16.00
2.12 5.79
714.00 42.84
264.63 W
2.65
267.27 X
37.55
304.83 Y
45.72
350.55 Z
3.51
354.06
35.41
35.40
Rate Amount
20.00 200.00
40.00 16.00
2.12 5.79
714.00 42.84
264.63 W
2.65
267.27 X
37.55
304.83 Y
45.72
350.55 Z
3.51
354.06
35.41
35.40
Rate Amount
29.00 290.00
45.00 27.00
2.12 3.86
714.00 99.96
645.00 58.05
478.87 W
4.79
483.66 X
67.95
551.61 Y
82.74
634.35 Z
6.34
640.70
64.07
64.05
Rate Amount
36.00 360.00
60.00 48.00
2.12 5.79
714.00 99.96
645.00 58.05
571.80 W
5.72
577.52 X
81.14
658.66 Y
98.80
757.45 Z
7.57
765.03
76.50
76.50
Rate Amount
35.00 350.00
45.00 27.00
2.12 5.79
714.00 57.12
439.91 W
4.40
444.31 X
62.43
506.73 Y
76.01
582.74 Z
5.83
588.57
58.86
58.85
Rate Amount
58.00 580.00
45.00 36.00
2.12 5.79
714.00 71.40
693.19 W
6.93
700.12 X
98.37
798.49 Y
119.77
918.26 Z
9.18
927.44
92.74
92.75
Rate Amount
22.00 220.00
40.00 8.00
2.12 5.79
784.00 23.52
257.31 W
2.57
259.88 X
36.51
296.39 Y
44.46
340.85 Z
3.41
344.26
34.43
34.45
Rate Amount
400.00 386.40
2.12 10.24
357.00 140.66
187.35 0.74
2.12 42.93
714.00 178.50
645.00 161.25
2.12 21.31
942.02 W
9.42
951.44 X
133.68
1085.12 Y
162.77
1247.89 Z
12.48
1260.37
600.17
600.15
Rate Amount
791.00 544.21
187.35 1.29
60.00 3.60
61.45 30.73 A
784.00 588.00
1167.82 W
11.37
1179.19 X
161.36
1340.55 Y
196.47
1537.03 Z
15.06
1552.09
310.42
310.40
Rate Amount
30.00 300.00
714.00 178.50
645.00 161.25
639.75 W
6.40
646.15 X
90.78
736.93 Y
110.54
847.47 Z
8.47
855.95
85.59
85.60
Rate Amount
432.00 432.00
784.00 101.92
2.12 5.51
539.43 W
5.39
544.83 X
76.55
621.37 Y
93.21
714.58 Z
7.15
721.73
721.75
Rate Amount
28.00 28.00
2.12 5.51
33.51 W
0.34
33.85 X
4.76
38.60 Y
5.79
44.39 Z
0.44
44.84
44.85
Rate Amount
20.00 20.00
2.12 5.51
25.51 W
0.26
25.77 X
3.62
29.39 Y
4.41
33.80 Z
0.34
34.13
34.15
Rate Amount
240.00 2400.00
2.12 41.34
2.12 212.21
2653.55 W
26.54
2680.09 X
376.55
3056.64 Y
458.50
3515.14 Z
35.15
3550.29
355.03
355.05
Rate Amount
11.00 11.00
2.12 2.20
13.20 W
0.13
13.34 X
1.87
15.21 Y
2.28
17.49 Z
0.17
17.67
17.65
Rate Amount
130.00 650.00
749.00 112.35
645.00 96.75
2.12 9.92
869.02 W
8.69
877.71 X
123.32
1001.03 Y
150.15
1151.18 Z
11.51
1162.70
232.54
232.55
Rate Amount
166.00 830.00
749.00 112.35
645.00 96.75
2.12 9.92
1049.02 W
10.49
1059.51 X
148.86
1208.37 Y
181.26
1389.63 Z
13.90
1403.53
280.71
280.70
Rate Amount
1085.93 2584.51
749.00 299.60
645.00 258.00
2.12 43.16
3185.28 W
31.85
3217.13 X
452.01
3669.14 Y
550.37
4219.51 Z
42.20
4261.70
1790.63
1790.65
Rate Amount
1248.82 2972.19
749.00 299.60
645.00 258.00
2.12 43.16
3572.95 W
35.73
3608.68 X
507.02
4115.70 Y
617.36
4733.06 Z
47.33
4780.39
2008.57
2008.55
Rate Amount
1700.00 4046.00
749.00 299.60
645.00 258.00
2.12 43.16
4646.76 W
46.47
4693.23 X
659.40
5352.63 Y
802.89
6155.52 Z
61.56
6217.08
2612.22
2612.20
Rate Amount
260.00 1300.00
749.00 112.35
645.00 96.75
2.12 16.54
1525.64 W
15.26
1540.89 X
216.50
1757.39 Y
263.61
2021.00 Z
20.21
2041.21
408.24
408.25
Rate Amount
1547.45 3682.93
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
4367.29 W
43.67
4410.97 X
619.74
5030.71 Y
754.61
5785.31 Z
57.85
5843.17
2455.11
2455.10
Rate Amount
1547.45 3682.93
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
4367.29 W
43.67
4410.97 X
619.74
5030.71 Y
754.61
5785.31 Z
57.85
5843.17
2455.11
2455.10
Rate Amount
480.00 2400.00
749.00 112.35
645.00 96.75
2.12 16.54
2625.64 W
26.26
2651.89 X
372.59
3024.48 Y
453.67
3478.16 Z
34.78
3512.94
702.59
702.60
Rate Amount
2326.00 5535.88
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
6220.24 W
62.20
6282.45 X
882.68
7165.13 Y
1074.77
8239.90 Z
82.40
8322.30
3496.76
3496.75
Rate Amount
2675.00 6366.50
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
7050.86 W
70.51
7121.37 X
1000.55
8121.92 Y
1218.29
9340.21 Z
93.40
9433.62
3963.70
3963.70
Rate Amount
315.00 1575.00
749.00 112.35
645.00 96.75
2.12 16.54
1800.64 W
18.01
1818.64 X
255.52
2074.16 Y
311.12
2385.29 Z
23.85
2409.14
481.83
481.85
Rate Amount
2000.00 4760.00
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
5444.36 W
54.44
5498.81 X
772.58
6271.39 Y
940.71
7212.10 Z
72.12
7284.22
3060.60
3060.60
Rate Amount
2100.00 4998.00
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 43.16
5682.36 W
56.82
5739.19 X
806.36
6545.54 Y
981.83
7527.37 Z
75.27
7602.65
3194.39
3194.40
Rate Amount
155.80 51.41
2.12 46.30
784.00 86.24
645.00 90.30
784.00 15.68
289.93 W
2.90
292.83 X
41.14
333.98 Y
50.10
384.07 Z
3.84
387.91
1293.05
1293.05
Rate Amount
720.00 576.00
2.12 3.86
784.00 446.88
2.12 9.37
1036.11 W
10.36
1046.47 X
147.03
1193.50 Y
179.02
1372.52 Z
13.73
1386.25
2100.38
2100.40
Rate Amount
867.00 693.60
2.12 3.86
784.00 446.88
2.12 9.37
1153.71 W
11.54
1165.25 X
163.72
1328.96 Y
199.34
1528.31 Z
15.28
1543.59
2338.77
2338.75
Rate Amount
380.00 2090.00
2.12 413.40
784.00 392.00
645.00 322.50
2.12 110.24
3328.14 W
33.28
3361.42 X
472.28
3833.70 Y
575.06
4408.76 Z
44.09
4452.84
890.57
890.55
Rate Amount
294.00 1617.00
2.12 413.40
784.00 392.00
645.00 322.50
2.12 110.24
2855.14 W
28.55
2883.69 X
405.16
3288.85 Y
493.33
3782.18 Z
37.82
3820.00
764.00
764.00
Rate Amount
3000.00 1620.00
2.12 55.12
2.12 303.16
1978.28 W
19.78
1998.06 X
280.73
2278.79 Y
341.82
2620.61 Z
26.21
2646.82
4901.51
4901.50
Rate Amount
900.00 1980.00
2.12 62.84
47.04 206.98
36.00 45.00
784.00 392.00
645.00 322.50
784.00 54.88
28.00 196.00
3260.19 W
32.60
3292.79 X
462.64
3755.43 Y
563.31
4318.75 Z
43.19
4361.93
1982.70
1982.70
Rate Amount
435.00 957.00
230.00 506.00
2.12 62.84
47.04 206.98
36.00 45.00
784.00 392.00
645.00 322.50
784.00 54.88
28.00 196.00
2743.19 W
27.43
2770.62 X
389.27
3159.90 Y
473.98
3633.88 Z
36.34
3670.22
1668.28
1668.30
Rate Amount
435.00 957.00
155.00 341.00
2.12 62.84
47.04 206.98
36.00 45.00
784.00 392.00
645.00 322.50
784.00 54.88
28.00 196.00
2578.19 W
25.78
2603.97 X
365.86
2969.83 Y
445.47
3415.31 Z
34.15
3449.46
1567.94
1567.95
Rate Amount
800.00 1768.00
14.00 56.00
11.00 88.00
165.00 24.75
2.12 41.34
2.12 82.68
714.00 192.78
645.00 193.50
2447.05 W
24.47
2471.52 X
347.25
2818.77 Y
422.82
3241.58 Z
32.42
3274.00
1559.05
1559.05
Rate Amount
210.00 231.00
2.12 137.80
2.12 27.56
396.36 W
3.96
400.32 X
56.25
456.57 Y
68.49
525.05 Z
5.25
530.30
530.30
Rate Amount
420.00 5157.60
38.00 747.08
23.00 220.80
2.60 109.20
76.00 133.76
2.12 44.10
90.00 17.10
2.12 110.24
2.12 55.12
784.00 2979.20
645.00 2967.00
12541.20 W
125.41
12666.61 X
1779.66
14446.27 Y
2166.94
16613.21 Z
166.13
16779.34
1503.52
1503.50
Rate Amount
220.00 2701.60
38.00 747.08
23.00 220.80
2.60 109.20
76.00 133.76
2.12 44.10
90.00 17.10
2.12 110.24
2.12 55.12
784.00 2979.20
645.00 2967.00
10085.20 W
100.85
10186.05 X
1431.14
11617.19 Y
1742.58
13359.77 Z
133.60
13493.36
1209.08
1209.10
Rate Amount
215.00 2640.20
38.00 747.08
23.00 220.80
2.60 109.20
76.00 133.76
2.12 44.10
90.00 17.10
2.12 110.24
2.12 55.12
784.00 2979.20
645.00 2967.00
10023.80 W
100.24
10124.03 X
1422.43
11546.46 Y
1731.97
13278.43 Z
132.78
13411.21
1201.72
1201.70
Rate Amount
140.00 1719.20
38.00 747.08
23.00 220.80
2.60 109.20
76.00 133.76
2.12 44.10
90.00 17.10
2.12 110.24
2.12 55.12
784.00 2979.20
645.00 2967.00
9102.80 W
91.03
9193.82 X
1291.73
10485.56 Y
1572.83
12058.39 Z
120.58
12178.97
1091.31
1091.30
Rate Amount
791.00 4065.74
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
7240.13 W
72.40
7312.53 X
1027.41
8339.94 Y
1250.99
9590.93 Z
95.91
9686.84
4484.65
4484.65
Rate Amount
402.00 2066.28
187.35 9.63
772.00 39.68
2.12 19.02
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
5299.36 W
52.99
5352.36 X
752.01
6104.36 Y
915.65
7020.02 Z
70.20
7090.22
3282.51
3282.50
Rate Amount
650.00 3341.00
187.35 9.63
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
6515.39 W
65.15
6580.54 X
924.57
7505.11 Y
1125.77
8630.87 Z
86.31
8717.18
4035.73
4035.75
Rate Amount
791.00 4065.74
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
7477.73 W
74.78
7552.50 X
1061.13
8613.63 Y
1292.04
9905.67 Z
99.06
10004.73
4631.82
4631.80
Rate Amount
402.00 2066.28
772.00 39.68
2.12 19.02
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
5536.96 W
55.37
5592.33 X
785.72
6378.06 Y
956.71
7334.76 Z
73.35
7408.11
3429.68
3429.70
Rate Amount
650.00 3341.00
187.35 9.63
772.00 39.68
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
187.35 9.63
784.00 1019.20
714.00 642.60
645.00 677.25
784.00 82.32
2.12 71.66
6802.30 W
68.02
6870.32 X
965.28
7835.60 Y
1175.34
9010.94 Z
90.11
9101.05
4213.45
4213.45
Rate Amount
791.00 3480.40
187.35 8.24
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
6467.43 W
64.67
6532.10 X
917.76
7449.86 Y
1117.48
8567.34 Z
85.67
8653.02
4006.03
4006.05
Rate Amount
402.00 1768.80
187.35 8.24
772.00 33.97
2.12 16.28
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
4806.08 W
48.06
4854.14 X
682.01
5536.15 Y
830.42
6366.57 Z
63.67
6430.23
2976.96
2976.95
Rate Amount
650.00 2860.00
187.35 8.24
413.00 582.33
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
5847.03 W
58.47
5905.50 X
829.72
6735.22 Y
1010.28
7745.51 Z
77.46
7822.96
3621.74
3621.75
Rate Amount
791.00 3480.40
187.35 8.24
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
6705.03 W
67.05
6772.08 X
951.48
7723.56 Y
1158.53
8882.09 Z
88.82
8970.91
4153.20
4153.20
Rate Amount
402.00 1768.80
772.00 33.97
2.12 16.28
187.35 8.24
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
5043.68 W
50.44
5094.12 X
715.72
5809.84 Y
871.48
6681.31 Z
66.81
6748.13
3124.13
3124.15
Rate Amount
650.00 2860.00
187.35 8.24
413.00 582.33
275.00 165.00
150.00 30.00
250.00 120.00
150.00 12.00
784.00 940.80
714.00 571.20
645.00 645.00
784.00 78.40
2.12 71.66
6084.63 W
60.85
6145.48 X
863.44
7008.92 Y
1051.34
8060.25 Z
80.60
8140.85
3768.91
3768.90
Rate Amount
413.00 697.97
2.12 3.86
791.00 474.60
187.35 1.12
714.00 235.62
645.00 161.25
2.12 41.89
1616.31 W
16.16
1632.48 X
229.36
1861.84 Y
279.28
2141.12 Z
21.41
2162.53
1404.24
1404.25
Rate Amount
413.00 697.97
2.12 3.86
14.00 70.00
714.00 235.62
645.00 161.25
2.12 41.89
1210.59 W
12.11
1222.70 X
171.79
1394.48 Y
209.17
1603.66 Z
16.04
1619.69
1051.75
1051.75
Rate Amount
1062.00 9664.20
2.12 275.60
2.12 8.97
9948.77 W
99.49
10048.26 X
1411.78
11460.04 Y
1719.01
13179.04 Z
131.79
13310.83
1462.73
1462.75
Rate Amount
4702.00 16457.00
2.12 381.60
2.12 21.20
16859.80 W
168.60
17028.40 X
2392.49
19420.89 Y
2913.13
22334.02 Z
223.34
22557.36
6444.96
6444.95
Rate Amount
22500.00 55350.00
250.00 2477.50
400.00 7928.00
2.12 381.60
2.12 21.20
66158.30 W
661.58
66819.88 X
9388.19
76208.08 Y
11431.21
87639.29 Z
876.39
88515.68
35981.98
35982.00
Rate Amount
5200.00 5200.00
784.00 133.28
2.12 7.72
5341.00 W
53.41
5394.41 X
757.91
6152.32 Y
922.85
7075.17 Z
70.75
7145.92
7145.90
Rate Amount
510.00 5610.00
61.45 614.50 A
2.12 85.01
749.00 958.72
645.00 922.35
2.12 71.15
8261.73 W
76.47
8338.20 X
1085.18
9423.38 Y
1321.33
10744.71 Z
101.30
10846.02
1084.60
1084.60
Rate Amount
298.74 1493.70
749.00 112.35
645.00 96.75
2.12 24.70
1727.50 W
17.27
1744.77 X
245.14
1989.91 Y
298.49
2288.40 Z
22.88
2311.28
462.26
462.25
Rate Amount
2295.00 5462.10
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 64.34
6167.64 W
61.68
6229.32 X
875.22
7104.54 Y
1065.68
8170.22 Z
81.70
8251.92
3467.19
3467.20
Rate Amount
2707.00 6442.66
130.00 52.00
60.00 28.80
35.00 2.80
749.00 299.60
645.00 258.00
2.12 64.34
7148.20 W
71.48
7219.68 X
1014.37
8234.05 Y
1235.11
9469.16 Z
94.69
9563.85
4018.42
4018.40
Rate Amount
364.00 1820.00
749.00 112.35
645.00 96.75
2.12 9.92
2039.02 W
20.39
2059.41 X
289.35
2348.76 Y
352.31
2701.07 Z
27.01
2728.08
545.62
545.60
Rate Amount
2479.00 5900.02
749.00 299.60
645.00 258.00
2.12 43.16
6500.78 W
65.01
6565.79 X
922.49
7488.28 Y
1123.24
8611.53 Z
86.12
8697.64
3654.47
3654.45
Rate Amount
413.00 2065.00
749.00 112.35
645.00 96.75
2.12 9.92
2284.02 W
22.84
2306.86 X
324.11
2630.98 Y
394.65
3025.62 Z
30.26
3055.88
611.18
611.20
Rate Amount
2703.00 6433.14
749.00 299.60
645.00 258.00
2.12 43.16
7033.90 W
70.34
7104.24 X
998.15
8102.39 Y
1215.36
9317.75 Z
93.18
9410.92
3954.17
3954.15
Rate Amount
280.00 1089.20
311.00 1144.48
100.00 349.00
70.00 487.90
15.00 218.25
15.00 120.00
260.00 520.00
130.00 130.00
2.12 360.40
534.00 363.12
773.00 525.64
5307.99 W
53.08
5361.07 X
753.23
6114.30 Y
917.15
7031.45 Z
70.31
7101.76
10443.76
10443.75
Rate Amount
280.00 1383.20
311.00 2755.46
100.00 706.00
70.00 884.10
15.00 418.65
15.00 150.00
260.00 1040.00
130.00 260.00
2.12 360.40
534.00 720.90
773.00 1043.55
9722.26 W
97.22
9819.48 X
1379.64
11199.12 Y
1679.87
12878.99 Z
128.79
13007.78
9635.39
9635.40
Rate Amount
280.00 1764.00
311.00 3047.80
100.00 1062.00
70.00 1053.50
15.00 560.10
15.00 180.00
361.00 1444.00
130.00 260.00
2.12 360.40
534.00 1153.44
773.00 1669.68
12554.92 W
125.55
12680.47 X
1781.61
14462.08 Y
2169.31
16631.39 Z
166.31
16797.70
7776.71
7776.70
Rate Amount
351.00 1512.81
469.00 1885.38
135.00 517.05
75.00 579.75
15.00 239.85
15.00 150.00
365.00 730.00
130.00 130.00
2.12 360.40
534.00 507.30
773.00 734.35
7346.89 W
73.47
7420.36 X
1042.56
8462.92 Y
1269.44
9732.36 Z
97.32
9829.68
10347.03
10347.05
Rate Amount
351.00 1881.36
469.00 4281.97
135.00 990.90
75.00 1037.25
15.00 459.30
15.00 180.00
361.00 1444.00
130.00 260.00
2.12 360.40
534.00 865.08
773.00 1252.26
13012.52 W
130.13
13142.65 X
1846.54
14989.19 Y
2248.38
17237.56 Z
172.38
17409.94
10746.88
10746.90
Rate Amount
351.00 3022.11
469.00 7114.73
135.00 3759.75
75.00 1642.50
15.00 1251.75
15.00 240.00
361.00 1444.00
130.00 260.00
2.12 360.40
534.00 2136.00
773.00 3092.00
24323.24 W
243.23
24566.47 X
3451.59
28018.06 Y
4202.71
32220.77 Z
322.21
32542.98
8135.74
8135.75
Rate Amount
280.00 999.60
311.00 164.83
100.00 399.00
70.00 297.50
15.00 125.70
15.00 120.00
2.12 360.40
534.00 320.40
773.00 463.80
3251.23 W
32.51
3283.74 X
461.37
3745.11 Y
561.77
4306.87 Z
43.07
4349.94
7249.91
7249.90
Rate Amount
396.00 2122.56
568.00 3419.36
135.00 704.70
75.00 385.50
100.00 572.00
15.00 343.65
15.00 150.00
455.00 1365.00
2635.00 2635.00
2.12 360.40
534.00 1009.26
773.00 1460.97
14528.40 W
145.28
14673.68 X
2061.65
16735.34 Y
2510.30
19245.64 Z
192.46
19438.09
10284.71
10284.70
Rate Amount
396.00 2494.80
568.00 3413.68
469.00 1664.95
135.00 1088.10
75.00 694.50
100.00 571.00
15.00 479.70
15.00 180.00
455.00 1365.00
2635.00 2635.00
365.00 730.00
130.00 130.00
2.12 360.40
534.00 1297.62
773.00 1878.39
18983.14 W
189.83
19172.97 X
2693.80
21866.77 Y
3280.02
25146.79 Z
251.47
25398.26
10451.96
10451.95
Rate Amount
314.00 1683.04
291.00 2298.90
88.00 236.72
66.00 456.72
70.00 865.20
15.00 207.60
20.00 369.60
15.00 180.00
114.00 228.00
60.00 240.00
2.12 360.40
534.00 865.08
773.00 1252.26
9243.52 W
92.44
9335.96 X
1311.70
10647.66 Y
1597.15
12244.81 Z
122.45
12367.25
7634.11
7634.10
Rate Amount
418.00 2115.08
291.00 3445.44
88.00 355.52
66.00 685.08
70.00 1432.20
15.00 311.40
20.00 554.40
15.00 180.00
114.00 228.00
60.00 360.00
2.12 360.40
534.00 865.08
773.00 1252.26
12144.86 W
121.45
12266.31 X
1723.42
13989.72 Y
2098.46
16088.18 Z
160.88
16249.07
10030.29
10030.30
Rate Amount
424.00 2539.76
357.00 2984.52
98.00 259.70
85.00 649.40
75.00 426.75
90.00 698.40
15.00 229.20
20.00 387.40
15.00 210.00
114.00 228.00
60.00 240.00
2.12 360.40
534.00 1084.02
773.00 1569.19
11866.74 W
118.67
11985.41 X
1683.95
13669.36 Y
2050.40
15719.76 Z
157.20
15876.96
7821.16
7821.15
Rate Amount
583.00 3859.46
358.00 4829.42
98.00 390.04
85.00 1012.35
75.00 948.00
90.00 1133.10
15.00 357.15
20.00 619.20
15.00 240.00
114.00 228.00
60.00 360.00
2.12 360.40
534.00 1297.62
773.00 1878.39
17513.13 W
175.13
17688.26 X
2485.20
20173.46 Y
3026.02
23199.48 Z
231.99
23431.48
9642.58
9642.60
Rate Amount
583.00 3859.46
358.00 4242.30
98.00 519.40
85.00 872.10
75.00 948.00
90.00 985.50
15.00 307.80
20.00 580.00
15.00 240.00
114.00 228.00
60.00 360.00
2.12 360.40
534.00 1297.62
773.00 1878.39
16678.97 W
166.79
16845.76 X
2366.83
19212.59 Y
2881.89
22094.48 Z
220.94
22315.42
9183.30
9183.30
Rate Amount
424.00 3472.56
357.00 4558.89
98.00 476.28
85.00 1023.40
75.00 591.75
90.00 1095.30
15.00 361.20
20.00 608.00
15.00 240.00
1535.00 3070.00
105.00 420.00
2.12 360.40
534.00 1922.40
773.00 2782.80
20982.98 W
209.83
21192.81 X
2977.59
24170.40 Y
3625.56
27795.96 Z
277.96
28073.92
7798.31
7798.30
Rate Amount
424.00 4808.16
357.00 9192.75
98.00 951.58
98.00 235.20
85.00 2066.35
75.00 828.00
90.00 2209.50
15.00 729.30
20.00 1224.20
15.00 360.00
1535.00 3070.00
105.00 840.00
110.00 220.00
2.12 360.40
534.00 3844.80
773.00 5565.60
36505.84 W
365.06
36870.90 X
5180.36
42051.26 Y
6307.69
48358.95 Z
483.59
48842.54
6783.69
6783.70
Rate Amount
424.00 3650.64
385.00 4851.00
98.00 414.54
85.00 980.90
75.00 623.25
90.00 1080.00
15.00 346.20
20.00 588.60
15.00 270.00
1265.00 2530.00
105.00 420.00
2.12 360.40
534.00 2242.80
773.00 3246.60
21604.93 W
216.05
21820.98 X
3065.85
24886.83 Y
3733.02
28619.85 Z
286.20
28906.05
6882.39
6882.40
Rate Amount
424.00 5431.44
385.00 9786.70
98.00 828.10
98.00 205.80
85.00 1980.50
75.00 938.25
90.00 2179.80
15.00 699.00
20.00 1185.80
15.00 390.00
1265.00 2530.00
105.00 840.00
110.00 220.00
2.12 360.40
534.00 4485.60
773.00 6493.20
38554.59 W
385.55
38940.14 X
5471.09
44411.22 Y
6661.68
51072.91 Z
510.73
51583.64
6140.91
6140.90
Rate Amount
583.00 6243.93
385.00 7349.65
98.00 828.10
85.00 1488.35
75.00 1561.50
90.00 1637.10
15.00 525.15
20.00 932.60
15.00 360.00
1265.00 2530.00
105.00 630.00
2.12 360.40
534.00 3364.20
773.00 4869.90
32680.88 W
326.81
33007.69 X
4637.58
37645.27 Y
5646.79
43292.06 Z
432.92
43724.98
6940.47
6940.45
Rate Amount
583.00 5019.63
385.00 7276.50
98.00 621.32
85.00 1514.70
75.00 623.25
90.00 1620.00
15.00 549.60
20.00 882.80
15.00 270.00
1265.00 2530.00
133.00 133.00
105.00 630.00
2.12 360.40
534.00 2242.80
773.00 3246.60
27520.60 W
275.21
27795.81 X
3905.31
31701.12 Y
4755.17
36456.28 Z
364.56
36820.85
8766.87
8766.85
Rate Amount
212.00 2120.00
35.84 14.34
2.12 5.79
714.00 99.96
645.00 90.30
2330.38 W
23.30
2353.69 X
330.69
2684.38 Y
402.66
3087.04 Z
30.87
3117.91
311.79
311.80
Rate Amount
237.00 2370.00
35.84 14.34
2.12 5.79
714.00 99.96
645.00 90.30
2580.38 W
25.80
2606.19 X
366.17
2972.36 Y
445.85
3418.21 Z
34.18
3452.39
345.24
345.25
Rate Amount
260.00 2600.00
35.84 14.34
2.12 5.79
714.00 99.96
645.00 90.30
2810.38 W
28.10
2838.49 X
398.81
3237.29 Y
485.59
3722.89 Z
37.23
3760.12
376.01
376.00
Rate Amount
361.00 3610.00
35.84 14.34
2.12 5.79
714.00 99.96
645.00 90.30
3820.38 W
38.20
3858.59 X
542.13
4400.72 Y
660.11
5060.83 Z
50.61
5111.44
511.14
511.15
Rate Amount
365.00 3650.00
35.84 14.34
2.12 5.79
714.00 99.96
645.00 90.30
3860.38 W
38.60
3898.99 X
547.81
4446.80 Y
667.02
5113.81 Z
51.14
5164.95
516.50
516.50
Rate Amount
130.00 1300.00
2.12 9.37
2.12 6.36
749.00 93.63
1409.36 W
14.09
1423.45 X
199.99
1623.44 Y
243.52
1866.96 Z
18.67
1885.63
188.56
188.55
Rate Amount
114.00 1140.00
2.12 9.37
2.12 6.36
749.00 93.63
1249.36 W
12.49
1261.85 X
177.29
1439.14 Y
215.87
1655.01 Z
16.55
1671.56
167.16
167.15
Rate Amount
60.00 600.00
2.12 9.37
2.12 6.36
749.00 93.63
709.36 W
7.09
716.45 X
100.66
817.11 Y
122.57
939.68 Z
9.40
949.07
94.91
94.90
Rate Amount
105.00 1050.00
2.12 9.37
2.12 6.36
749.00 93.63
1159.36 W
11.59
1170.95 X
164.52
1335.47 Y
200.32
1535.79 Z
15.36
1551.15
155.11
155.10
Rate Amount
110.00 1100.00
2.12 9.37
2.12 6.36
749.00 93.63
1209.36 W
12.09
1221.45 X
171.61
1393.06 Y
208.96
1602.02 Z
16.02
1618.04
161.80
161.80
Rate Amount
60.00 3676.20
17.00 340.00
55.50 266.40 A
784.00 313.60
714.00 378.42
645.00 793.35
714.00 42.84
2.12 71.15
5881.96 W
56.16
5938.11 X
796.88
6734.99 Y
970.29
7705.28 Z
74.39
7779.67
133.33
133.35
Rate Amount
469.00 375.20
2.12 3.86
784.00 446.88
2.12 9.37
835.31 W
8.35
843.66 X
118.53
962.20 Y
144.33
1106.53 Z
11.07
1117.59
1693.32
1693.30
Rate Amount
469.00 3447.15
2.12 28.66
2.12 57.05
714.00 642.60
645.00 645.00
4820.46 W
48.20
4868.67 X
684.05
5552.71 Y
832.91
6385.62 Z
63.86
6449.48
921.35
921.35
Rate Amount
609.00 4476.15
2.12 41.89
2.12 57.05
714.00 642.60
645.00 645.00 W
5862.69
58.63 X
5921.32
831.95 Y
6753.26
1012.99 Z
7766.25
77.66
7843.91
1120.56
1120.55
Rate Amount
582.00 366.66
21.00 63.00
2.12 1.93
714.00 78.54
645.00 38.70
2.12 16.54
565.37 W
5.65
571.02 X
80.23
651.25 Y
97.69
748.93 Z
7.49
756.42
1260.71
1260.70
Rate Amount
877.00 552.51
21.00 63.00
2.12 3.86
714.00 78.54
645.00 38.70
2.12 16.54
753.14 W
7.53
760.68 X
106.87
867.55 Y
130.13
997.68 Z
9.98
1007.66
1679.43
1679.45
Rate Amount
439.00 4829.00
2.12 28.66
2.12 57.05
714.00 913.92
645.00 922.35
22.00 1210.00
7960.98 W
79.61
8040.59 X
1129.70
9170.29 Y
1375.54
10545.84 Z
105.46
10651.30
1065.13
1065.15
Rate Amount
582.00 6402.00
2.12 28.66
2.12 57.05
714.00 913.92
645.00 922.35
22.00 1210.00
9533.98 W
95.34
9629.32 X
1352.92
10982.24 Y
1647.34
12629.58 Z
126.30
12755.87
1275.59
1275.60
Rate Amount
877.00 9647.00
2.12 28.66
2.12 57.05
714.00 913.92
645.00 922.35
22.00 1210.00
12778.98 W
127.79
12906.77 X
1813.40
14720.17 Y
2208.03
16928.20 Z
169.28
17097.48
1709.75
1709.75
Rate Amount
877.00 1929.40
2.12 57.11
21.00 134.40
39.00 171.60
40.00 50.00
749.00 411.95
645.00 354.75
3109.21 W
31.09
3140.30 X
441.21
3581.52 Y
537.23
4118.75 Z
41.19
4159.93
1890.88
1890.90
Rate Amount
582.00 3841.20
2.12 17.19
21.00 630.00
22.00 2244.00
2.12 275.60
714.00 549.78
645.00 554.70
2.12 114.10
8226.57 W
82.27
8308.84 X
1167.39
9476.23 Y
1421.43
10897.66 Z
108.98
11006.64
1834.44
1834.45
Rate Amount
877.00 5788.20
2.12 17.19
21.00 630.00
22.00 2244.00
2.12 275.60
714.00 549.78
645.00 554.70
2.12 114.10
10173.57 W
101.74
10275.31 X
1443.68
11718.99 Y
1757.85
13476.84 Z
134.77
13611.60
2268.60
2268.60
Rate Amount
1200.00 6972.00
2.12 275.60
2.12 530.00
7777.60 W
77.78
7855.38 X
1103.68
8959.06 Y
1343.86
10302.91 Z
103.03
10405.94
1791.04
1791.05
Rate Amount
6000.00 21000.00
450.00 3600.00
2.12 275.60
2.12 593.60
25469.20 W
254.69
25723.89 X
3614.21
29338.10 Y
4400.71
33738.81 Z
337.39
34076.20
9736.06
9736.05
Rate Amount
1200.00 6972.00
2.12 275.60
2.12 530.00
7777.60 W
77.78
7855.38 X
1103.68
8959.06 Y
1343.86
10302.91 Z
103.03
10405.94
1791.04
1791.05
Rate Amount
25500.00 62730.00
250.00 2477.50
400.00 7928.00
2.12 381.60
2.12 21.20
73538.30 W
735.38
74273.68 X
10435.45
84709.14 Y
12706.37
97415.51 Z
974.16
98389.66
39995.80
39995.80
Rate Amount
640.00 640.00
150.00 60.00
2.12 3.86
784.00 47.04
750.90 W
7.51
758.41 X
106.56
864.96 Y
129.74
994.71 Z
9.95
1004.66
100.47
100.45
Rate Amount
455.00 455.00
150.00 60.00
2.12 3.86
784.00 47.04
565.90 W
5.66
571.56 X
80.30
651.86 Y
97.78
749.64 Z
7.50
757.14
75.71
75.70
Rate Amount
255.00 255.00
150.00 60.00
2.12 3.86
784.00 47.04
365.90 W
3.66
369.56 X
51.92
421.48 Y
63.22
484.70 Z
4.85
489.55
48.95
48.95
Rate Amount
650.00 409.50
2.12 1.93
714.00 78.54
645.00 38.70
2.12 16.54
545.21 W
5.45
550.66 X
77.37
628.02 Y
94.20
722.23 Z
7.22
729.45
1215.75
1215.75
Rate Amount
455.60 3348.66
2.12 28.66
2.12 57.05
714.00 642.60
645.00 645.00
4721.97 W
47.22
4769.19 X
670.07
5439.26 Y
815.89
6255.15 Z
62.55
6317.70
902.53
902.55
Rate Amount
1500.00 3465.00
2.12 62.84
21.00 130.20
749.00 299.60
645.00 258.00
4215.64 W
42.16
4257.79 X
598.22
4856.01 Y
728.40
5584.42 Z
55.84
5640.26
2563.75
2563.75
Rate Amount
1450.00 913.50
2.12 1.93
714.00 78.54
645.00 38.70
2.12 16.54
1049.21 W
10.49
1059.70 X
148.89
1208.58 Y
181.29
1389.87 Z
13.90
1403.77
2339.62
2339.60
Rate Amount
1000.00 1000.00
230.00 92.00
2.12 5.79
784.00 47.04
1144.83 W
11.45
1156.28 X
162.46
1318.73 Y
197.81
1516.54 Z
15.17
1531.71
153.17
153.15
Rate Amount
1550.00 1550.00
230.00 92.00
2.12 5.79
784.00 47.04
1694.83 W
16.95
1711.78 X
240.50
1952.28 Y
292.84
2245.12 Z
22.45
2267.57
226.76
226.75
Rate Amount
535.00 5350.00
2.12 41.34
2.12 212.21
5603.55 W
56.04
5659.59 X
795.17
6454.76 Y
968.21
7422.97 Z
74.23
7497.20
749.72
749.70
Rate Amount
260.00 546.00
2.12 15.90
784.00 39.20
645.00 32.25
633.35 W
6.33
639.68 X
89.88
729.56 Y
109.43
838.99 Z
8.39
847.38
423.69
423.70
Rate Amount
21.00 210.00
2.12 5.79
784.00 39.20
645.00 32.25
287.24 W
2.87
290.11 X
40.76
330.87 Y
49.63
380.50 Z
3.81
384.31
38.43
38.45
Rate Amount
4950.00 5197.50
145.72 15.30
784.00 392.00
714.00 535.50
645.00 645.00
55.50 166.50 A
2.12 43.82
6995.62 W
68.29
7063.91 X
969.09
8033.00 Y
1179.97
9212.97 Z
90.46
9303.44
93.03
93.05
Rate Amount
4950.00 7920.00
4950.00 2623.50
5400.00 325.08
5100.00 247.35
6100.00 322.69
145.72 60.47
784.00 2116.80
714.00 2570.40
714.00 3855.60
645.00 2322.00
714.00 314.16
55.50 315.24 A
2.12 171.15
23164.44 W
228.49
23392.93 X
3242.42
26635.35 Y
3948.02
30583.37 Z
302.68
30886.05
78.19
78.20
Rate Amount
4950.00 2623.50
4950.00 643.50
4850.00 2910.00
145.72 18.36
2.12 570.49
2.12 142.76
35.00 350.00
55.50 582.75 A
784.00 2352.00
784.00 4704.00
714.00 4284.00
784.00 392.00
714.00 357.00
645.00 5160.00
2.12 342.30
25432.66 W
248.50
25681.16 X
3526.33
29207.48 Y
4293.71
33501.19 Z
329.18
33830.38
9397.33
9397.35
Rate Amount
4850.00 2410.45
5400.00 826.20
4950.00 6880.50
4950.00 544.50
145.72 31.48
2.12 570.49
48.00 384.00
2.12 355.63
2.12 570.49
2.12 28.66
55.50 999.00 A
784.00 1568.00
784.00 2352.00
714.00 2856.00
645.00 2580.00
784.00 47.04
714.00 42.84
2.12 342.30
23389.58 W
223.91
23613.48 X
3177.33
26790.82 Y
3868.77
30659.59 Z
296.61
30956.20
5374.34
5374.35
Rate Amount
4850.00 2410.45
5400.00 826.20
4950.00 4633.20
145.72 23.11
37.00 148.00
120.00 480.00
32.00 64.00
2.12 355.52
2.12 570.49
55.50 855.26 A
784.00 1568.00
784.00 2352.00
714.00 2856.00
784.00 47.04
714.00 42.84
645.00 3225.00
2.12 342.30
20799.41 W
199.44
20998.85 X
2830.17
23829.02 Y
3446.07
27275.09 Z
264.20
27539.29
4781.13
4781.15
Rate Amount
4850.00 2410.45
5400.00 1122.12
4950.00 2742.30
4850.00 911.80
145.72 21.09
37.00 148.00
120.00 480.00
32.00 64.00
2.12 355.52
2.12 570.49
55.50 815.85 A
784.00 1568.00
784.00 2352.00
714.00 2856.00
784.00 47.04
714.00 42.84
645.00 3225.00
2.12 342.30
20074.80 W
192.59
20267.39 X
2732.94
23000.33 Y
3327.67
26328.00 Z
255.12
26583.12
4615.13
4615.15
Rate Amount
1400.00 10500.00
800.00 2000.00
300.00 300.00
2.12 114.10
784.00 1999.20
645.00 1644.75
784.00 94.08
714.00 85.68
2.12 128.43
16866.24 W
168.66
17034.90 X
2393.40
19428.30 Y
2914.25
22342.55 Z
223.43
22565.97
3008.80
3008.80
Rate Amount
1375.00 10312.50
560.00 1400.00
300.00 300.00
2.12 114.10
784.00 1999.20
645.00 1644.75
784.00 94.08
714.00 85.68
2.12 128.43
16078.74 W
160.79
16239.53 X
2281.65
18521.18 Y
2778.18
21299.36 Z
212.99
21512.35
2868.31
2868.30
Rate Amount
1300.00 9750.00
450.00 1125.00
300.00 300.00
2.12 114.10
784.00 1999.20
645.00 1644.75
784.00 94.08
714.00 85.68
2.12 128.43
15241.24 W
152.41
15393.65 X
2162.81
17556.46 Y
2633.47
20189.93 Z
201.90
20391.83
2718.91
2718.90
Rate Amount
260.00 260.00
2.12 57.05
317.05 W
3.17
320.22 X
44.99
365.21 Y
54.78
419.99 Z
4.20
424.19
424.20
Rate Amount
800.00 800.00
2.12 28.66
828.66 W
8.29
836.95 X
117.59
954.54 Y
143.18
1097.72 Z
10.98
1108.70
1108.70
Rate Amount
800.00 800.00
2.12 28.66
828.66 W
8.29
836.95 X
117.59
954.54 Y
143.18
1097.72 Z
10.98
1108.70
1108.70
Rate Amount
500.00 750.00
750.00 W
7.50
757.50 X
106.43
863.93 Y
129.59
993.52 Z
9.94
1003.45
668.97
668.95
Rate Amount
8843.45 79.59 A
784.00 133.28
784.00 62.72
714.00 57.12
645.00 322.50
2.12 142.63
797.84 W
7.18
805.03 X
101.92
906.95 Y
124.10
1031.05 Z
9.51
1040.57
69.37
69.35
Rate Amount
784.00 133.28
645.00 109.65
2.12 142.63
385.56 W
3.86
389.42 X
54.71
444.13 Y
66.62
510.75 Z
5.11
515.86
34.39
34.40
Rate Amount
54.00 1620.00
2.12 85.58
714.00 121.38
784.00 203.84
645.00 219.30
2.12 32.58
69.35 2080.50 A
55.50 135.42 A
4498.61 W
22.83
4521.44 X
323.92
4845.36 Y
394.42
5239.78 Z
30.24
5270.02
175.67
175.65
Rate Amount
54.00 1620.00
2.12 85.58
714.00 121.38
784.00 203.84
645.00 219.30
2.12 32.58
645.00 17.42
645.00 12.58
784.00 6.59
714.00 0.86
2.12 25.91
55.50 135.42 A
2481.45 W
23.46
2504.91 X
332.91
2837.82 Y
405.36
3243.18 Z
31.08
3274.26
109.14
109.15
Rate Amount
27.00 27.00
2.12 0.98
2.12 6.38
34.36 W
0.34
34.70 X
4.88
39.58 Y
5.94
45.51 Z
0.46
45.97
45.95
Rate Amount
4950.00 891.00
4850.00 29.10
4850.00 9.70
8843.45 79.59 A
80.00 48.00
2.12 76.07
2.12 38.03
2.12 11.30
714.00 71.40
784.00 117.60
645.00 129.00
2.12 19.02
1519.81 W
14.40
1534.21 X
204.37
1738.58 Y
248.85
1987.43 Z
19.08
2006.51
114.66
114.65
Rate Amount
4950.00 891.00
4850.00 29.10
80.00 48.00
2.12 76.07
2.12 38.03
2.12 11.30
714.00 71.40
784.00 117.60
645.00 129.00
2.12 19.02
1430.51 W
14.31
1444.82 X
203.00
1647.82 Y
247.17
1894.99 Z
18.95
1913.94
109.37
109.35
Rate Amount
200.00 1000.00
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1698.79 W
15.49
1714.27 X
219.88
1934.15 Y
267.73
2201.88 Z
20.53
2222.40
444.48
444.50
etre @ 2.75kg per uds Unit
Rate Amount
200.00 1000.00
2.12 -42.40
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1656.38 W
15.07
1671.45 X
213.86
1885.31 Y
260.40
2145.71 Z
19.96
2165.68
433.14
433.15
Rate Amount
220.00 1100.00
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1798.78 W
16.49
1815.27 X
234.07
2049.34 Y
285.01
2334.35 Z
21.85
2356.20
471.24
471.25
Rate Amount
220.00 1100.00
2.12 -42.40
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1756.38 W
16.07
1772.45 X
228.05
2000.50 Y
277.68
2278.18 Z
21.29
2299.47
459.89
459.90
Rate Amount
250.00 1250.00
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1948.78 W
17.99
1966.77 X
255.36
2222.13 Y
310.92
2533.05 Z
23.84
2556.89
511.38
511.40
Rate Amount
250.00 1250.00
2.12 -42.40
80.00 48.00
2.12 76.07
4950.00 148.50
2.12 11.30
784.00 117.60
645.00 129.00
2.12 19.02
55.50 149.30 A
1906.38 W
17.57
1923.95 X
249.34
2173.29 Y
303.60
2476.88 Z
23.28
2500.16
500.03
500.05
Rate Amount
50.00 374.50
4850.00 29.10
4850.00 9.70
8843.45 79.59 A
80.00 48.00
2.12 76.07
2.12 38.03
2.12 11.30
714.00 28.56
784.00 47.04
645.00 51.60
2.12 7.72
801.21 W
7.22
808.42 X
102.40
910.82 Y
124.68
1035.51 Z
9.56
1045.07
146.57
146.55
Rate Amount
50.00 374.50
4850.00 29.10
80.00 48.00
2.12 76.07
2.12 38.03
2.12 11.30
714.00 28.56
784.00 47.04
645.00 51.60
2.12 7.72
711.91 W
7.12
719.03 X
101.02
820.06 Y
123.01
943.07 Z
9.43
952.50
133.59
133.60
Rate Amount
60.00 7500.00
145.72 18.22
55.50 155.40 A
2.00 714.00
784.00 1176.00
714.00 535.50
645.00 3547.50
2.12 171.15
13817.76 W
136.62
13954.39 X
1938.76
15893.14 Y
2360.66
18253.81 Z
180.98
18434.79
154.91
154.90
Rate Amount
70.00 8750.00
145.72 18.22
55.50 155.40 A
2.00 714.00
784.00 1176.00
714.00 535.50
645.00 3547.50
2.12 171.15
15067.76 W
149.12
15216.89 X
2116.14
17333.03 Y
2576.64
19909.67 Z
197.54
20107.21
168.97
168.95
Rate Amount
50.00 6250.00
145.72 18.22
55.50 155.40 A
2.00 714.00
784.00 1176.00
714.00 535.50
645.00 3547.50
2.12 171.15
12567.76 W
124.12
12691.89 X
1761.38
14453.26 Y
2144.68
16597.94 Z
164.43
16762.37
140.86
140.85
Rate Amount
4750.00 80.75
714.00 28.56
645.00 25.80
2.12 3.86
138.97 W
1.39
140.36 X
19.72
160.08 Y
24.01
184.09 Z
1.84
185.93
185.95
Rate Amount
55.00 55.00
4850.00 38.80
714.00 21.42
645.00 19.35
2.12 3.86
138.43 W
1.38
139.81 X
19.64
159.46 Y
23.92
183.37 Z
1.83
185.21
185.20
Rate Amount
5300.00 100.70
5400.00 27.00
714.00 21.42
2.12 9.65
158.77 W
1.59
160.35 X
22.53
182.88 Y
27.43
210.32 Z
2.10
212.42
88.51
88.50
Rate Amount
5200.00 520.00
145.72 1.46
714.00 271.32
645.00 245.10
2.12 9.65
1047.52 W
10.48
1058.00 X
148.65
1206.65 Y
181.00
1387.64 Z
13.88
1401.52
140.15
140.15
Rate Amount
5100.00 510.00
145.72 1.46
784.00 650.72
714.00 592.62
2.12 22.87
1777.67 W
17.78
1795.45 X
252.26
2047.71 Y
307.16
2354.87 Z
23.55
2378.41
237.84
237.85
Rate Amount
2.00 2.00
2.12 0.55
2.55 W
0.03
2.58 X
0.36
2.94 Y
0.44
3.38 Z
0.03
3.41
3.40
Rate Amount
4950.00 15646.95
5400.00 5956.20
290.00 7728.50
4750.00 1771.75
145.72 67.57
145.72 14.44
2.00 4640.00
784.00 1450.40
645.00 806.25
714.00 428.40
55.50 2680.10 A
2.12 235.09
41425.64 W
387.46
41813.10 X
5498.19
47311.29 Y
6694.68
54005.96 Z
513.26
54519.22
102.27
102.25
Rate Amount
4850.00 703.25
4850.00 407.40
145.72 3.34
2.00 120.00
784.00 548.80
645.00 322.50
714.00 178.50
55.50 33.30 A
2.12 9.65
2326.73 W
22.93
2349.67 X
325.45
2675.12 Y
396.27
3071.39 Z
30.38
3101.77
142.28
142.30
Rate Amount
60.00 1227.60
145.72 2.99
55.50 45.51 A
2.00 144.00
784.00 188.16
645.00 580.50
714.00 85.68
2.12 26.46
2300.89 W
22.55
2323.45 X
320.05
2643.50 Y
389.70
3033.20 Z
29.88
3063.07
157.16
157.15
Rate Amount
50.00 929.50
145.72 2.71
55.50 45.51 A
2.00 144.00
784.00 188.16
645.00 580.50
714.00 85.68
2.12 26.46
2002.52 W
19.57
2022.09 X
277.71
2299.80 Y
338.14
2637.94 Z
25.92
2663.86
150.42
150.40
Rate Amount
290.00 1644.30
145.72 3.07
55.50 45.51 A
2.00 144.00
784.00 188.16
645.00 580.50
714.00 85.68
2.12 26.46
2717.68 W
26.72
2744.40 X
379.19
3123.60 Y
461.71
3585.31 Z
35.40
3620.71
180.22
180.20
Rate Amount
270.00 270.00
714.00 285.60
645.00 258.00
2.12 21.20
834.80 W
8.35
843.15 X
118.46
961.61 Y
144.24
1105.85 Z
11.06
1116.91
111.69
111.70
Rate Amount
312.00 312.00
714.00 285.60
645.00 258.00
2.12 21.20
876.80 W
8.77
885.57 X
124.42
1009.99 Y
151.50
1161.49 Z
11.61
1173.10
117.31
117.30
Rate Amount
380.00 380.00
714.00 357.00
645.00 322.50
2.12 21.20
1080.70 W
10.81
1091.51 X
153.36
1244.86 Y
186.73
1431.59 Z
14.32
1445.91
144.59
144.60
Rate Amount
468.00 468.00
714.00 357.00
645.00 322.50
2.12 21.20
1168.70 W
11.69
1180.39 X
165.84
1346.23 Y
201.93
1548.17 Z
15.48
1563.65
156.36
156.35
Rate Amount
598.00 598.00
714.00 428.40
645.00 387.00
2.12 21.20
1434.60 W
14.35
1448.95 X
203.58
1652.52 Y
247.88
1900.40 Z
19.00
1919.41
191.94
191.95
Rate Amount
230.00 483.00
120.00 120.00
784.00 47.04
645.00 129.00
714.00 14.28
2.12 63.60
2.12 42.40
2.12 15.90
915.22 W
9.15
924.37 X
129.87
1054.25 Y
158.14
1212.38 Z
12.12
1224.51
612.25
612.25
Rate Amount
250.00 422.50
2.12 3.86
4850.00 89.24
2.12 3.86
714.00 121.38
714.00 121.38
645.00 38.70
2.12 41.89
842.81 W
8.43
851.24 X
119.60
970.83 Y
145.63
1116.46 Z
11.16
1127.62
732.22
732.20
Rate Amount
413.00 697.97
2.12 3.86
4850.00 89.24
2.12 3.86
714.00 121.38
714.00 121.38
645.00 38.70
2.12 41.89
1118.28 W
11.18
1129.46 X
158.69
1288.15 Y
193.22
1481.37 Z
14.81
1496.19
971.55
971.55
Rate Amount
309.00 339.90
2.12 3.86
714.00 92.82
2.12 266.23
702.81 W
7.03
709.84 X
99.73
809.57 Y
121.44
931.00 Z
9.31
940.31
940.30
Rate Amount
515.00 566.50
2.12 3.86
714.00 92.82
2.12 266.23
929.41 W
9.29
938.70 X
131.89
1070.59 Y
160.59
1231.18 Z
12.31
1243.49
1243.50
Rate Amount
4950.00 891.00
4850.00 17.95
4850.00 29.10
2.12 38.03
2.12 11.30
2.00 32.00
714.00 71.40
784.00 117.60
645.00 129.00
2.12 19.02
1356.39 W
13.56
1369.96 X
192.48
1562.44 Y
234.37
1796.80 Z
17.97
1814.77
103.70
103.70
Rate Amount
4590.00 2593.35
437.15 246.99
4355.20 1890.16
5000.00 100.00
145.72 2.91
714.00 771.12
645.00 161.25
645.00 1044.90
714.00 192.78
7003.46 W
70.03
7073.50 X
993.83
8067.32 Y
1210.10
9277.42 Z
92.77
9370.19
937.02
937.00
Rate Amount
4590.00 2593.35
437.15 246.99
3686.30 1599.85
5000.00 100.00
145.72 2.91
714.00 771.12
645.00 161.25
645.00 1044.90
714.00 192.78
6713.16 W
67.13
6780.29 X
952.63
7732.92 Y
1159.94
8892.86 Z
88.93
8981.79
898.18
898.20
Rate Amount
4590.00 2960.55
437.15 281.96
900.00 135.00
163.93 24.59
823.15 123.47
714.00 642.60
645.00 1277.10
714.00 35.70
5480.97 W
54.81
5535.78 X
777.78
6313.56 Y
947.03
7260.60 Z
72.61
7333.20
733.32
733.30
Rate Amount
1400.00 373.80
1350.00 120.15
163.93 58.36
1500.00 267.00
163.93 29.18
5000.00 850.00
145.72 24.77
714.00 571.20
645.00 903.00
714.00 742.56
784.00 23.52
800.00 24.00
2.12 85.71
4073.25 W
40.73
4113.99 X
578.01
4692.00 Y
703.80
5395.80 Z
53.96
5449.76
544.98
545.00
Rate Amount
1400.00 373.80
1350.00 120.15
163.93 58.36
1500.00 267.00
163.93 29.18
1400.00 161.00
163.93 18.85
5000.00 1055.00
5000.00 100.00
145.72 33.66
36.00 87.84
2.12 5.79
714.00 1535.10
645.00 1032.00
645.00 1212.60
714.00 192.78
2.12 114.10
6397.21 W
63.97
6461.18 X
907.80
7368.98 Y
1105.35
8474.32 Z
84.74
8559.07
855.91
855.90
Rate Amount
1400.00 467.60
1350.00 149.85
163.93 72.95
1500.00 333.00
163.93 36.39
1400.00 161.00
163.93 18.85
5000.00 1215.00
5000.00 100.00
145.72 38.32
36.00 87.84
2.12 5.79
714.00 1535.10
645.00 1199.70
645.00 1212.60
714.00 192.78
2.12 114.10
6940.87 W
69.41
7010.28 X
984.94
7995.23 Y
1199.28
9194.51 Z
91.95
9286.46
928.65
928.65
Rate Amount
5024.15 1180.68
5000.00 100.00
145.72 2.91
714.00 1342.32
645.00 1212.60
714.00 385.56
2.12 41.89
4265.96 W
42.66
4308.62 X
605.36
4913.98 Y
737.10
5651.08 Z
56.51
5707.59
570.76
570.75
Rate Amount
7365.15 7365.15 A
714.00 249.90
645.00 116.10
714.00 35.70
2.12 41.89
7808.74 W
4.44
7813.18 X
62.95
7876.12 Y
76.65
7952.77 Z
5.88
7958.65
7958.65
Rate Amount
714.00 257.04
645.00 232.20
2.12 28.66
517.90 W
5.18
523.08 X
73.49
596.57 Y
89.49
686.06 Z
6.86
692.92
69.29
69.30
Rate Amount
1350.00 306.45
1350.00 102.60
163.93 49.67
1500.00 226.50
163.93 24.75
5000.00 545.00
5000.00 100.00
145.72 18.80
189.00 164.81
163.93 8.36
5000.00 202.50
145.72 5.90
1130.00 7.91
70.00 198.80
2.12 7.72
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 342.30
6857.75 W
68.58
6926.33 X
973.15
7899.48 Y
1184.92
9084.40 Z
90.84
9175.25
917.52
917.50
Rate Amount
917.50 9175.00 A
60.00 170.40
70.00 -198.80
11200.00 453.60
5000.00 -202.50
9397.70 W
2.23
9399.93 X
31.60
9431.53 Y
38.48
9470.01 Z
2.95
9472.96
947.30
947.30
Rate Amount
917.50 9175.00 A
56.00 159.04
70.00 -198.80
11200.00 227.36
5000.00 -101.50
9261.10 W
0.86
9261.96 X
12.22
9274.18 Y
14.88
9289.06 Z
1.14
9290.20
929.02
929.00
Rate Amount
1350.00 306.45
1350.00 102.60
163.93 49.67
1500.00 226.50
163.93 24.75
5000.00 545.00
5000.00 100.00
145.72 18.80
189.00 181.06
163.93 9.18
11200.00 453.60
145.72 5.90
1130.00 7.91
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 342.30
6919.41 W
69.19
6988.61 X
981.90
7970.50 Y
1195.58
9166.08 Z
91.66
9257.74
925.77
925.75
Rate Amount
917.50 9175.00 A
60.00 170.40
70.00 -198.80
9146.60 W
-0.28
9146.32 X
-4.03
9142.29 Y
-4.91
9137.38 Z
-0.38
9137.00
913.70
913.70
Rate Amount
917.50 9175.00 A
70.00 -198.80
2.12 -7.72
8968.48 W
-2.07
8966.42 X
-29.31
8937.11 Y
-35.68
8901.43 Z
-2.74
8898.69
889.87
889.85
Rate Amount
1350.00 283.50
1350.00 94.50
163.93 45.90
1500.00 210.00
163.93 22.95
5000.00 502.50
5000.00 100.00
145.72 17.56
250.00 350.00
163.93 13.44
5000.00 289.00
145.72 8.42
1130.00 13.56
70.00 283.50
2.12 11.58
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 285.25
7077.35 W
70.77
7148.12 X
1004.31
8152.43 Y
1222.86
9375.29 Z
93.75
9469.05
946.90
946.90
Rate Amount
946.90 9469.00 A
60.00 243.00
70.00 -283.50
11200.00 647.36
5000.00 -289.00
9786.86 W
3.18
9790.04 X
45.11
9835.14 Y
54.92
9890.07 Z
4.21
9894.28
989.43
989.45
Rate Amount
946.90 9469.00 A
56.00 226.80
70.00 -283.50
11200.00 323.68
5000.00 -144.50
9591.48 W
1.22
9592.70 X
17.38
9610.09 Y
21.16
9631.25 Z
1.62
9632.87
963.29
963.30
Rate Amount
1350.00 283.50
1350.00 94.50
163.93 45.90
1500.00 210.00
163.93 22.95
5000.00 502.50
5000.00 100.00
145.72 17.56
250.00 350.00
163.93 13.44
11200.00 647.36
145.72 8.42
1130.00 13.56
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 285.25
7140.63 W
71.41
7212.04 X
1013.29
8225.33 Y
1233.80
9459.13 Z
94.59
9553.72
955.37
955.35
Rate Amount
946.90 9469.00 A
60.00 243.00
70.00 -283.50
9428.50 W
-0.41
9428.10 X
-5.75
9422.35 Y
-7.00
9415.35 Z
-0.54
9414.81
941.48
941.50
Rate Amount
1350.00 283.50
1350.00 94.50
163.93 45.90
1500.00 210.00
163.93 22.95
5000.00 502.50
5000.00 100.00
145.72 17.56
250.00 350.00
163.93 13.44
5000.00 289.00
145.72 8.42
1130.00 13.56
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 285.25
6782.27 W
67.82
6850.09 X
962.44
7812.53 Y
1171.88
8984.41 Z
89.84
9074.26
907.43
907.45
Rate Amount
1350.00 256.50
1350.00 81.00
163.93 40.98
1500.00 187.50
163.93 20.49
5000.00 448.50
5000.00 100.00
145.72 15.99
250.00 433.50
163.93 16.72
5000.00 405.00
145.72 11.80
1130.00 19.21
70.00 396.90
2.12 13.23
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 331.00
7324.01 W
73.24
7397.25 X
1039.31
8436.56 Y
1265.48
9702.05 Z
97.02
9799.07
979.91
979.90
Rate Amount
979.90 9799.00 A
60.00 340.20
70.00 -396.90
11200.00 907.20
5000.00 -405.00
10244.50 W
4.46
10248.96 X
63.22
10312.17 Y
76.98
10389.15 Z
5.90
10395.05
1039.51
1039.50
Rate Amount
979.90 9799.00 A
56.00 317.52
70.00 -396.90
11200.00 453.60
5000.00 -202.50
9970.72 W
1.72
9972.44 X
24.37
9996.81 Y
29.67
10026.48 Z
2.27
10028.75
1002.88
1002.90
Rate Amount
1350.00 256.50
1350.00 81.00
163.93 40.98
1500.00 187.50
163.93 20.49
5000.00 448.50
5000.00 100.00
145.72 15.99
250.00 433.50
163.93 16.72
11200.00 907.20
145.72 11.80
1130.00 19.21
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 331.00
7416.08 W
74.16
7490.24 X
1052.38
8542.62 Y
1281.39
9824.01 Z
98.24
9922.25
992.23
992.25
Rate Amount
979.90 9799.00 A
60.00 340.20
70.00 -396.90
9742.30 W
-0.57
9741.73 X
-8.05
9733.69 Y
-9.80
9723.89 Z
-0.75
9723.14
972.31
972.30
Rate Amount
1350.00 256.50
1350.00 81.00
163.93 40.98
1500.00 187.50
163.93 20.49
5000.00 448.50
5000.00 100.00
145.72 15.99
250.00 433.50
163.93 16.72
5000.00 405.00
145.72 11.80
1130.00 19.21
714.00 1278.06
645.00 1283.55
714.00 742.56
714.00 714.00
784.00 23.52
800.00 24.00
300.00 480.00
2.12 331.00
6913.88 W
69.14
6983.02 X
981.11
7964.13 Y
1194.62
9158.75 Z
91.59
9250.34
925.03
925.05
Rate Amount
5024.15 874.20
189.00 164.81
163.93 8.36
5000.00 202.50
145.72 5.90
1130.00 7.91
70.00 198.80
2.12 7.72
714.00 2142.00
645.00 1935.00
714.00 714.00
714.00 4998.00
2.12 428.01
11687.21 W
116.87
11804.08 X
1658.47
13462.55 Y
2019.38
15481.93 Z
154.82
15636.75
1563.68
1563.70
Rate Amount
1563.70 15637.00 A
60.00 170.40
70.00 -198.80
11200.00 453.60
5000.00 -202.50
15859.70 W
2.23
15861.93 X
31.60
15893.53 Y
38.48
15932.01 Z
2.95
15934.96
1593.50
1593.50
Rate Amount
1563.70 15637.00 A
56.00 159.04
70.00 -198.80
11200.00 227.36
5000.00 -101.50
15723.10 W
0.86
15723.96 X
12.22
15736.18 Y
14.88
15751.06 Z
1.14
15752.20
1575.22
1575.20
Rate Amount
5024.15 874.20
189.00 164.81
163.93 8.36
11200.00 453.60
145.72 5.90
1130.00 7.91
714.00 2142.00
645.00 1935.00
714.00 714.00
714.00 4998.00
2.12 428.01
11731.79 W
117.32
11849.11 X
1664.80
13513.91 Y
2027.09
15540.99 Z
155.41
15696.40
1569.64
1569.65
Rate Amount
1563.70 15637.00 A
60.00 170.40
70.00 -198.80
15608.60 W
-0.28
15608.32 X
-4.03
15604.29 Y
-4.91
15599.38 Z
-0.38
15599.00
1559.90
1559.90
Rate Amount
1563.70 15637.00 A
70.00 -198.80
2.12 -7.72
15430.48 W
-2.07
15428.42 X
-29.31
15399.11 Y
-35.68
15363.43 Z
-2.74
15360.69
1536.07
1536.05
Rate Amount
20.00 220.00
2.12 5.79
714.00 178.50
645.00 161.25
2.12 28.66
594.20 W
5.94
600.14 X
84.32
684.46 Y
102.67
787.13 Z
7.87
795.00
79.50
79.50
Rate Amount
714.00 214.20
645.00 193.50
645.00 193.50
601.20 W
6.01
607.21 X
85.31
692.53 Y
103.88
796.40 Z
7.96
804.37
80.44
80.45
Rate Amount
7958.65 1989.66 A
5000.00 200.00
145.72 5.83
645.00 322.50
160.00 384.00
11200.00 453.60
1130.00 7.91
60.00 170.40
189.00 164.81
163.93 8.36
145.72 5.90
2.12 7.72
145.72 34.97
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
2.12 285.25
714.00 385.56
300.00 1200.00
11427.27 W
94.38
11521.64 X
1339.24
12860.89 Y
1630.68
14491.57 Z
125.02
14616.59
1461.66
1461.65
Rate Amount
285.00 3135.00
2.12 85.71
4355.20 975.56
5000.00 220.00
11200.00 492.80
145.72 12.82
60.00 184.80
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9790.50 W
97.90
9888.40 X
1389.32
11277.72 Y
1691.66
12969.38 Z
129.69
13099.08
1309.91
1309.90
Rate Amount
265.00 2915.00
2.12 85.71
4355.20 975.56
5000.00 330.00
11200.00 246.40
92.24 8.12
56.00 172.48
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9417.07 W
94.17
9511.24 X
1336.33
10847.57 Y
1627.14
12474.71 Z
124.75
12599.45
1259.95
1259.95
Rate Amount
245.00 2695.00
2.12 85.71
4355.20 975.56
5000.00 440.00
145.72 12.82
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9108.50 W
91.08
9199.58 X
1292.54
10492.12 Y
1573.82
12065.94 Z
120.66
12186.60
1218.66
1218.65
Rate Amount
245.00 2695.00
2.12 85.71
4355.20 975.56
5000.00 440.00
145.72 12.82
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
70.00 -414.40
8694.10 W
86.94
8781.04 X
1233.74
10014.77 Y
1502.22
11516.99 Z
115.17
11632.16
1163.22
1163.20
Rate Amount
714.00 157.08
645.00 141.90
714.00 464.10
763.08 W
7.63
770.71 X
108.28
879.00 Y
131.85
1010.85 Z
10.11
1020.95
102.10
102.10
Rate Amount
285.00 3135.00
2.12 85.71
5024.15 723.48
11200.00 739.20
145.72 9.62
60.00 277.20
714.00 2320.50
645.00 2096.25
714.00 5426.40
2.12 342.30
15155.65 W
151.56
15307.21 X
2150.66
17457.87 Y
2618.68
20076.55 Z
200.77
20277.32
2027.73
2027.75
Rate Amount
265.00 2915.00
2.12 85.71
5024.15 723.48
11200.00 369.60
5000.00 165.00
145.72 9.62
56.00 258.72
714.00 2320.50
645.00 2096.25
714.00 5426.40
2.12 342.30
14712.57 W
147.13
14859.70 X
2087.79
16947.49 Y
2542.12
19489.61 Z
194.90
19684.50
1968.45
1968.45
Rate Amount
245.00 2695.00
2.12 85.71
5024.15 723.48
5000.00 330.00
145.72 9.62
70.00 323.40
714.00 2320.50
645.00 2096.25
714.00 5426.40
2.12 342.30
14352.65 W
143.53
14496.18 X
2036.71
16532.89 Y
2479.93
19012.83 Z
190.13
19202.95
1920.30
1920.30
Rate Amount
245.00 2695.00
2.12 85.71
5024.15 723.48
5000.00 330.00
145.72 9.62
70.00 323.40
714.00 2320.50
645.00 2096.25
714.00 5426.40
2.12 342.30
70.00 -522.20
13830.45 W
138.30
13968.76 X
1962.61
15931.37 Y
2389.71
18321.07 Z
183.21
18504.28
1850.43
1850.45
Rate Amount
275.00 3025.00
2.12 85.71
4355.20 975.56
5000.00 220.00
11200.00 492.80
145.72 12.82
60.00 184.80
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9680.50 W
96.80
9777.30 X
1373.71
11151.01 Y
1672.65
12823.67 Z
128.24
12951.90
1295.19
1295.20
Rate Amount
300.00 3300.00
2.12 85.71
4355.20 975.56
5000.00 330.00
11200.00 246.40
145.72 12.82
56.00 172.48
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9806.78 W
98.07
9904.85 X
1391.63
11296.48 Y
1694.47
12990.95 Z
129.91
13120.86
1312.09
1312.10
Rate Amount
260.00 2860.00
2.12 85.71
4355.20 975.56
5000.00 440.00
145.72 12.82
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
9273.50 W
92.73
9366.23 X
1315.96
10682.19 Y
1602.33
12284.52 Z
122.85
12407.36
1240.74
1240.75
Rate Amount
260.00 2860.00
2.12 85.71
4355.20 975.56
5000.00 440.00
145.72 12.82
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 343.40
70.00 -414.40
8859.10 W
88.59
8947.69 X
1257.15
10204.84 Y
1530.73
11735.56 Z
117.36
11852.92
1185.29
1185.30
Rate Amount
370.00 4070.00
2.12 85.71
4355.20 958.14
5000.00 220.00
11200.00 537.60
145.72 13.41
60.00 184.80
714.00 1142.40
645.00 1290.00
714.00 714.00
9216.06 W
92.16
9308.22 X
1307.81
10616.03 Y
1592.40
12208.43 Z
122.08
12330.52
1233.05
1233.05
Rate Amount
335.00 3685.00
2.12 85.71
4355.20 958.14
5000.00 340.00
11200.00 268.80
145.72 13.41
56.00 172.48
714.00 1142.40
645.00 1290.00
714.00 714.00
8669.94 W
86.70
8756.64 X
1230.31
9986.95 Y
1498.04
11484.99 Z
114.85
11599.84
1159.98
1160.00
Rate Amount
225.00 2475.00
2.12 85.71
4355.20 958.14
5000.00 460.00
145.72 13.41
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
7354.26 W
73.54
7427.80 X
1043.61
8471.41 Y
1270.71
9742.12 Z
97.42
9839.54
983.95
983.95
Rate Amount
225.00 2475.00
2.12 85.71
4355.20 958.14
5000.00 460.00
145.72 13.41
70.00 215.60
714.00 1142.40
645.00 1290.00
714.00 714.00
70.00 -414.40
6939.86 W
69.40
7009.26 X
984.80
7994.06 Y
1199.11
9193.17 Z
91.93
9285.10
928.51
928.50
Rate Amount
500.00 600.00
2.12 13.23
4355.20 52.26
2.12 85.71
5000.00 16.50
7800.00 61.62
5000.00 -39.50
784.00 156.80
645.00 129.00
2.12 57.05
1132.67 W
11.33
1144.00 X
160.73
1304.73 Y
195.71
1500.44 Z
15.00
1515.44
1515.45
Rate Amount
500.00 600.00
2.12 13.23
4355.20 60.97
7800.00 67.08
5000.00 -43.00
2.12 85.71
7800.00 25.74
784.00 196.00
645.00 161.25
2.12 57.05
1224.03 W
12.24
1236.27 X
173.70
1409.97 Y
211.50
1621.46 Z
16.21
1637.68
1637.70
Rate Amount
400.00 424.40
2.12 8.27
5024.15 70.34
2.12 53.74
5000.00 16.50
2.12 4.41
784.00 196.00
645.00 161.25
2.12 35.83
970.74 W
9.71
980.44 X
137.75
1118.20 Y
167.73
1285.92 Z
12.86
1298.78
1298.80
Rate Amount
1450.00 16675.00
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
25243.66 W
252.44
25496.10 X
3582.20
29078.30 Y
4361.74
33440.04 Z
334.40
33774.44
3377.44
3377.45
Rate Amount
550.00 6325.00
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
14893.66 W
148.94
15042.60 X
2113.48
17156.08 Y
2573.41
19729.49 Z
197.29
19926.79
1992.68
1992.70
Rate Amount
950.00 10925.00
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
19493.66 W
194.94
19688.60 X
2766.25
22454.84 Y
3368.23
25823.07 Z
258.23
26081.30
2608.13
2608.15
Rate Amount
1000.00 11500.00
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
20068.66 W
200.69
20269.35 X
2847.84
23117.19 Y
3467.58
26584.77 Z
265.85
26850.62
2685.06
2685.05
Rate Amount
620.00 7130.00
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
15698.66 W
156.99
15855.65 X
2227.72
18083.36 Y
2712.50
20795.87 Z
207.96
21003.83
2100.38
2100.40
Rate Amount
685.00 7877.50
4355.20 975.56
5000.00 250.00
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 285.25
16446.16 W
164.46
16610.62 X
2333.79
18944.41 Y
2841.66
21786.08 Z
217.86
22003.94
2200.39
2200.40
Rate Amount
784.00 1568.00
645.00 967.50
714.00 1785.00
2.12 114.10
4434.60 W
44.35
4478.94 X
629.29
5108.24 Y
766.24
5874.47 Z
58.74
5933.22
593.32
593.30
Rate Amount
784.00 1528.80
645.00 903.00
645.00 483.75
714.00 2270.52
2.12 57.05
5243.12 W
52.43
5295.55 X
744.02
6039.58 Y
905.94
6945.51 Z
69.46
7014.97
701.50
701.50
Rate Amount
320.00 3680.00
145.72 97.63
4355.20 975.56
5000.00 320.00
145.72 9.33
70.00 315.00
714.00 856.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 441.24
12755.56 W
127.56
12883.11 X
1810.08
14693.19 Y
2203.98
16897.17 Z
168.97
17066.14
1706.61
1706.60
Rate Amount
320.00 3680.00
145.72 97.63
5024.15 723.48
5000.00 320.00
145.72 9.33
70.00 315.00
714.00 2142.00
645.00 1935.00
645.00 645.00
714.00 4998.00
2.12 370.96
15236.39 W
152.36
15388.76 X
2162.12
17550.88 Y
2632.63
20183.51 Z
201.84
20385.34
2038.53
2038.55
Rate Amount
230.00 2530.00
2.12 72.21
3995.00 998.75
784.00 2430.40
714.00 785.40
645.00 354.75
714.00 192.78
2.12 22.87
7387.16 W
73.87
7461.03 X
1048.28
8509.31 Y
1276.40
9785.71 Z
97.86
9883.56
988.36
988.35
Rate Amount
250.00 2750.00
2.12 72.21
3995.00 998.75
784.00 2430.40
714.00 785.40
645.00 354.75
714.00 192.78
2.12 22.87
7607.16 W
76.07
7683.23 X
1079.49
8762.73 Y
1314.41
10077.14 Z
100.77
10177.91
1017.79
1017.80
Rate Amount
230.00 2530.00
2.12 72.21
3995.00 998.75
5319.25 122.34
784.00 3057.60
714.00 785.40
645.00 903.00
714.00 392.70
2.12 57.05
8919.05 W
89.19
9008.24 X
1265.66
10273.90 Y
1541.08
11814.98 Z
118.15
11933.13
1193.31
1193.30
Rate Amount
250.00 2750.00
2.12 72.21
3995.00 998.75
5319.25 122.34
784.00 3057.60
714.00 785.40
645.00 903.00
714.00 392.70
2.12 57.05
9139.05 W
91.39
9230.44 X
1296.88
10527.32 Y
1579.10
12106.41 Z
121.06
12227.48
1222.75
1222.75
Rate Amount
230.00 2530.00
2.12 72.21
3995.00 998.75
5319.25 122.34
784.00 3057.60
714.00 785.40
645.00 903.00
714.00 392.70
2.12 57.05
714.00 441.25
300.00 296.40
9656.70 W
96.57
9753.27 X
1370.33
11123.60 Y
1668.54
12792.14 Z
127.92
12920.06
1292.01
1292.00
Rate Amount
250.00 2750.00
2.12 72.21
3995.00 998.75
5319.25 122.34
784.00 3057.60
714.00 785.40
645.00 903.00
714.00 392.70
2.12 57.05
714.00 441.25
300.00 296.40
9876.70 W
98.77
9975.47 X
1401.55
11377.02 Y
1706.55
13083.57 Z
130.84
13214.41
1321.44
1321.45
Rate Amount
784.00 1176.00
1176.00 W
11.76
1187.76 X
166.88
1354.64 Y
203.20
1557.84 Z
15.58
1573.41
157.34
157.35
Rate Amount
714.00 142.80
645.00 129.00
271.80 W
2.72
274.52 X
38.57
313.09 Y
46.96
360.05 Z
3.60
363.65
36.37
36.35
Rate Amount
791.00 23579.71
150.00 4471.50
187.35 55.85
76.00 152.00
784.00 2101.12
645.00 870.75
2.12 70.55
31301.48 W
313.01
31614.50 X
4441.84
36056.33 Y
5408.45
41464.78 Z
414.65
41879.43
4187.94
4187.95
Rate Amount
500.00 14905.00
113.00 3368.53
187.35 55.85
76.00 152.00
784.00 1693.44
645.00 696.60
2.12 57.05
20928.47 W
209.28
21137.75 X
2969.85
24107.61 Y
3616.14
27723.75 Z
277.24
28000.99
2800.10
2800.10
Rate Amount
34790.00 153.08
163.93 0.72
880.00 3678.40
187.35 7.83
784.00 1372.00
645.00 1451.25
645.00 967.50
784.00 78.40
2.12 171.15
7880.33 W
78.80
7959.13 X
1118.26
9077.39 Y
1361.61
10439.00 Z
104.39
10543.39
10543.40
Rate Amount
4950.00 594.00
4850.00 12.13
145.72 2.33
2.00 12.00
2.12 19.29
714.00 64.26
784.00 352.80
645.00 161.25
55.50 33.30 A
1251.36 W
12.18
1263.54 X
172.85
1436.39 Y
210.46
1646.85 Z
16.14
1662.99
142.87
142.85
Rate Amount
175.00 179.38
2.12 13.23
4355.20 104.52
2.12 42.82
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
699.30 W
6.99
706.29 X
99.23
805.53 Y
120.83
926.36 Z
9.26
935.62
935.60
Rate Amount
175.00 179.38
2.12 13.23
5024.15 70.34
2.12 7.72
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
701.46 W
7.01
708.47 X
99.54
808.01 Y
121.20
929.21 Z
9.29
938.51
938.50
Rate Amount
300.00 307.50
2.12 13.23
4355.20 104.52
2.12 42.82
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
827.43 W
8.27
835.70 X
117.42
953.12 Y
142.97
1096.08 Z
10.96
1107.05
1107.05
Rate Amount
340.00 348.50
2.12 13.23
4355.20 104.52
2.12 28.56
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
854.16 W
8.54
862.70 X
121.21
983.91 Y
147.59
1131.50 Z
11.31
1142.81
1142.80
Rate Amount
400.00 410.00
2.12 13.23
4355.20 104.52
2.12 28.56
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
915.66 W
9.16
924.82 X
129.94
1054.75 Y
158.21
1212.97 Z
12.13
1225.09
1225.10
Rate Amount
500.00 512.50
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
997.32 W
9.97
1007.29 X
141.52
1148.82 Y
172.32
1321.14 Z
13.21
1334.35
1334.35
Rate Amount
560.00 574.00
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
1058.82 W
10.59
1069.41 X
150.25
1219.66 Y
182.95
1402.61 Z
14.03
1416.63
1416.65
Rate Amount
900.00 922.50
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
1405.11 W
14.05
1419.17 X
199.39
1618.56 Y
242.78
1861.34 Z
18.61
1879.96
1879.95
Rate Amount
1390.00 1424.75
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
1907.36 W
19.07
1926.44 X
270.66
2197.10 Y
329.57
2526.67 Z
25.27
2551.94
2551.95
Rate Amount
460.00 471.50
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
961.62 W
9.62
971.24 X
136.46
1107.69 Y
166.15
1273.85 Z
12.74
1286.59
1286.60
Rate Amount
525.00 538.13
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1026.04 W
10.26
1036.30 X
145.60
1181.90 Y
177.29
1359.19 Z
13.59
1372.78
1372.80
Rate Amount
550.00 563.75
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1051.66 W
10.52
1062.18 X
149.24
1211.42 Y
181.71
1393.13 Z
13.93
1407.06
1407.05
Rate Amount
750.00 768.75
2.12 13.23
5000.00 120.00
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1272.14 W
12.72
1284.86 X
180.52
1465.38 Y
219.81
1685.19 Z
16.85
1702.04
1702.05
Rate Amount
700.00 717.50
2.12 13.23
5000.00 120.00
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1220.89 W
12.21
1233.10 X
173.25
1406.35 Y
210.95
1617.30 Z
16.17
1633.47
1633.45
Rate Amount
500.00 512.50
2.12 13.23
5000.00 120.00
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1015.89 W
10.16
1026.05 X
144.16
1170.21 Y
175.53
1345.74 Z
13.46
1359.20
1359.20
Rate Amount
700.00 717.50
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1205.41 W
12.05
1217.47 X
171.05
1388.52 Y
208.28
1596.80 Z
15.97
1612.77
1612.75
Rate Amount
650.00 666.25
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1154.16 W
11.54
1165.71 X
163.78
1329.49 Y
199.42
1528.91 Z
15.29
1544.20
1544.20
Rate Amount
880.00 902.00
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1389.91 W
13.90
1403.81 X
197.24
1601.05 Y
240.16
1841.21 Z
18.41
1859.62
1859.60
Rate Amount
1200.00 1230.00
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1717.91 W
17.18
1735.09 X
243.78
1978.87 Y
296.83
2275.71 Z
22.76
2298.46
2298.45
Rate Amount
480.00 492.00
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
979.91 W
9.80
989.71 X
139.05
1128.77 Y
169.32
1298.08 Z
12.98
1311.06
1311.05
Rate Amount
700.00 717.50
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1205.41 W
12.05
1217.47 X
171.05
1388.52 Y
208.28
1596.80 Z
15.97
1612.77
1612.75
Rate Amount
650.00 666.25
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1154.16 W
11.54
1165.71 X
163.78
1329.49 Y
199.42
1528.91 Z
15.29
1544.20
1544.20
Rate Amount
880.00 902.00
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1389.91 W
13.90
1403.81 X
197.24
1601.05 Y
240.16
1841.21 Z
18.41
1859.62
1859.60
Rate Amount
1400.00 1435.00
2.12 13.23
4355.20 104.52
2.12 5.51
5000.00 16.50
2.12 5.30
784.00 156.80
645.00 129.00
2.12 57.05
1922.91 W
19.23
1942.14 X
272.87
2215.02 Y
332.25
2547.27 Z
25.47
2572.74
2572.75
Rate Amount
4355.20 104.52
2.12 85.71
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
549.59 W
5.50
555.08 X
77.99
633.07 Y
94.96
728.03 Z
7.28
735.31
735.30
Rate Amount
9.00 45.00
2.12 85.71
784.00 156.80
645.00 129.00
2.12 57.05
473.56 W
4.74
478.30 X
67.20
545.50 Y
81.82
627.32 Z
6.27
633.59
633.60
Rate Amount
4355.20 609.73
714.00 478.38
645.00 483.75
714.00 656.88
2.12 19.02
5000.00 200.00
145.72 5.83
645.00 322.50
145.00 174.00
2.12 132.29
4355.20 130.66
61.90 85.42 A
57.15 78.87 A
784.00 940.80
645.00 645.00
645.00 645.00
714.00 385.56
2.12 142.57
6136.25 W
59.72
6195.97 X
847.45
7043.42 Y
1031.87
8075.29 Z
79.11
8154.40
815.44
815.45
Rate Amount
1400.00 2100.00
163.93 245.90
645.00 451.50
645.00 335.40
714.00 257.04
2161.20 3241.80 A
510.00 5100.00
784.00 392.00
645.00 645.00
2.12 106.00
12874.64 W
96.33
12970.96 X
1366.95
14337.91 Y
1664.42
16002.33 Z
127.61
16129.93
1612.99
1613.00
Rate Amount
500.00 512.50
2.12 13.23
5024.15 70.34
2.12 7.72
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
1034.58 W
10.35
1044.93 X
146.81
1191.74 Y
178.76
1370.50 Z
13.71
1384.21
1384.20
Rate Amount
560.00 574.00
2.12 13.23
5024.15 70.34
2.12 7.72
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
1096.08 W
10.96
1107.04 X
155.54
1262.58 Y
189.39
1451.97 Z
14.52
1466.49
1466.50
Rate Amount
900.00 922.50
2.12 13.23
5024.15 70.34
2.12 7.72
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
1444.58 W
14.45
1459.03 X
204.99
1664.02 Y
249.60
1913.63 Z
19.14
1932.76
1932.75
Rate Amount
1390.00 1424.75
2.12 13.23
5024.15 70.34
2.12 7.72
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 57.05
1946.83 W
19.47
1966.30 X
276.27
2242.57 Y
336.38
2578.95 Z
25.79
2604.74
2604.75
Rate Amount
16.00 1088.00
2.12 13.23
5024.15 70.34
2.12 85.71
5000.00 16.50
784.00 196.00
645.00 161.25
2.12 56.71
1687.74 W
16.88
1704.62 X
239.50
1944.11 Y
291.62
2235.73 Z
22.36
2258.09
169.40
169.40
Rate Amount
500.00 512.50
2.12 13.23
9.00 90.00
784.00 196.00
645.00 322.50
2.12 57.05
1191.28 W
11.91
1203.19 X
169.05
1372.24 Y
205.84
1578.07 Z
15.78
1593.86
1593.85
Rate Amount
560.00 574.00
2.12 13.23
9.00 90.00
784.00 196.00
645.00 322.50
2.12 57.05
1252.78 W
12.53
1265.31 X
177.78
1443.08 Y
216.46
1659.54 Z
16.60
1676.14
1676.15
Rate Amount
900.00 922.50
2.12 13.23
9.00 90.00
784.00 196.00
645.00 322.50
2.12 57.05
1601.28 W
16.01
1617.29 X
227.23
1844.52 Y
276.68
2121.20 Z
21.21
2142.41
2142.40
Rate Amount
1390.00 1424.75
2.12 13.23
9.00 90.00
784.00 196.00
645.00 322.50
2.12 57.05
2103.53 W
21.04
2124.56 X
298.50
2423.06 Y
363.46
2786.52 Z
27.87
2814.39
2814.40
Rate Amount
380.00 79.80
784.00 78.40
645.00 64.50
2.12 10.60
233.30 W
2.33
235.63 X
33.11
268.74 Y
40.31
309.05 Z
3.09
312.14
312.15
Rate Amount
380.00 68.40
784.00 62.72
645.00 51.60
2.12 10.60
193.32 W
1.93
195.25 X
27.43
222.69 Y
33.40
256.09 Z
2.56
258.65
258.65
Rate Amount
380.00 57.00
784.00 47.04
645.00 38.70
2.12 10.60
153.34 W
1.53
154.87 X
21.76
176.63 Y
26.49
203.13 Z
2.03
205.16
205.15
Rate Amount
380.00 41.80
784.00 31.36
645.00 25.80
2.12 10.60
109.56 W
1.10
110.66 X
15.55
126.20 Y
18.93
145.13 Z
1.45
146.58
146.60
Rate Amount
500.00 512.50
2.12 13.23
9.00 90.00
784.00 156.80
645.00 258.00
2.12 57.05
1087.58 W
10.88
1098.45 X
154.33
1252.79 Y
187.92
1440.70 Z
14.41
1455.11
1455.10
Rate Amount
560.00 574.00
2.12 13.23
9.00 90.00
784.00 156.80
645.00 258.00
2.12 57.05
1149.08 W
11.49
1160.57 X
163.06
1323.63 Y
198.54
1522.17 Z
15.22
1537.39
1537.40
Rate Amount
900.00 922.50
2.12 13.23
9.00 90.00
784.00 156.80
645.00 258.00
2.12 57.05
1497.58 W
14.98
1512.55 X
212.51
1725.07 Y
258.76
1983.83 Z
19.84
2003.67
2003.65
Rate Amount
1390.00 1424.75
2.12 13.23
9.00 90.00
784.00 156.80
645.00 258.00
2.12 57.05
1999.83 W
20.00
2019.83 X
283.79
2303.61 Y
345.54
2649.15 Z
26.49
2675.65
2675.65
Rate Amount
2.12 6.61
2.12 2.12
8.73 W
0.09
8.82 X
1.24
10.06 Y
1.51
11.57 Z
0.12
11.69
11.70
Rate Amount
3209.00 36903.50
4355.20 975.56
11200.00 560.00
145.72 7.29
2.12 57.05
784.00 940.80
645.00 645.00
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 54.57
45558.77 W
455.59
46014.36 X
6465.02
52479.37 Y
7871.91
60351.28 Z
603.51
60954.79
6095.48
6095.50
Rate Amount
3209.00 38508.00
4355.20 975.56
11200.00 560.00
145.72 7.29
2.12 57.05
784.00 1372.00
645.00 806.25
645.00 645.00
714.00 3570.00
300.00 1200.00
2.12 54.57
47755.72 W
477.56
48233.28 X
6776.78
55010.05 Y
8251.51
63261.56 Z
632.62
63894.17
6389.42
6389.40
Rate Amount
2049.00 16801.80
8.70 174.00
13.00 130.00
18.00 72.00
2.12 105.83
784.00 1254.40
645.00 1032.00
2.12 57.05
19627.08 W
196.27
19823.35 X
2785.18
22608.53 Y
3391.28
25999.81 Z
260.00
26259.81
3282.48
3282.50
Rate Amount
740.00 216080.00
145.00 52200.00
70.00 39900.00
3.00 3420.00
22.00 31680.00
2.12 1038.80
784.00 19600.00
645.00 16125.00
2.12 697.48
380741.28 W
3807.41
384548.69 X
54029.09
438577.78 Y
65786.67
504364.45 Z
5043.64
509408.10
5094.08
5094.10
Rate Amount
740.00 216080.00
210.00 75600.00
70.00 39900.00
3.00 3420.00
22.00 31680.00
2.12 1038.80
784.00 19600.00
645.00 16125.00
2.12 697.48
404141.28 W
4041.41
408182.69 X
57349.67
465532.36 Y
69829.85
535362.22 Z
5353.62
540715.84
5407.16
5407.15
Rate Amount
1000.00 11500.00
145.72 97.63
4355.20 975.56
5000.00 250.00
70.00 315.00
145.72 7.29
2.12 53.74
714.00 856.80
645.00 645.00
645.00 645.00
714.00 3570.00
2.12 441.24
19357.26 W
193.57
19550.83 X
2746.89
22297.73 Y
3344.66
25642.38 Z
256.42
25898.81
2589.88
2589.90
Rate Amount
2000.00 23000.00
145.72 97.63
4355.20 975.56
5000.00 250.00
70.00 315.00
145.72 7.29
2.12 53.74
714.00 856.80
645.00 645.00
645.00 645.00
714.00 1428.00
250.00 500.00
2.12 441.24
29215.26 W
292.15
29507.41 X
4145.79
33653.20 Y
5047.98
38701.19 Z
387.01
39088.20
3908.82
3908.80
Rate Amount
1200.00 13800.00
145.72 97.63
4355.20 975.56
5000.00 250.00
70.00 315.00
145.72 7.29
2.12 53.74
714.00 856.80
645.00 645.00
645.00 645.00
714.00 1428.00
250.00 500.00
2.12 441.24
20015.26 W
200.15
20215.41 X
2840.27
23055.68 Y
3458.35
26514.03 Z
265.14
26779.17
2677.92
2677.90
Rate Amount
6000.00 139560.00
145.72 338.94
38.00 3359.20
120.00 9720.00
21.00 355.74
30.00 508.20
2.12 57.05
2.12 114.10
784.00 1019.20
714.00 11067.00
645.00 9997.50
120.00 303.60
2.12 1.10
714.00 806.82
645.00 728.85
2.12 107.21
120.00 450.00
2.12 14.33
714.00 1806.42
645.00 1631.85
2.12 67.80
2.12 80.75
182095.66 W
1820.96
183916.62 X
25840.29
209756.90 Y
31463.54
241220.44 Z
2412.20
243632.64
1320.37
1320.35
Rate Amount
6000.00 114120.00
145.72 277.16
38.00 3359.20
120.00 9720.00
21.00 355.74
30.00 508.20
2.12 57.05
2.12 114.10
784.00 1019.20
714.00 11067.00
645.00 9997.50
120.00 303.60
2.12 1.10
714.00 806.82
645.00 728.85
2.12 107.21
120.00 450.00
2.12 14.33
714.00 1806.42
645.00 1631.85
2.12 67.80
2.12 80.75
156593.88 W
1565.94
158159.82 X
22221.45
180381.27 Y
27057.19
207438.46 Z
2074.38
209512.85
1135.46
1135.45
Rate Amount
6000.00 92460.00
145.72 224.41
38.00 3359.20
120.00 9720.00
21.00 355.74
30.00 508.20
2.12 57.05
2.12 114.10
784.00 1019.20
714.00 11067.00
645.00 9997.50
120.00 303.60
2.12 1.10
714.00 806.82
645.00 728.85
2.12 107.21
120.00 450.00
2.12 14.33
714.00 1806.42
645.00 1631.85
2.12 67.80
2.12 80.75
134881.13 W
1348.81
136229.94 X
19140.31
155370.24 Y
23305.54
178675.78 Z
1786.76
180462.54
978.02
978.00
Rate Amount
784.00 117.60
645.00 96.75
214.35 W
2.14
216.49 X
30.42
246.91 Y
37.04
283.95 Z
2.84
286.79
95.60
95.60
Rate Amount
784.00 94.08
645.00 77.40
171.48 W
1.71
173.19 X
24.33
197.53 Y
29.63
227.16 Z
2.27
229.43
76.48
76.50
Rate Amount
784.00 94.08
645.00 77.40
171.48 W
1.71
173.19 X
24.33
197.53 Y
29.63
227.16 Z
2.27
229.43
76.48
76.50
Rate Amount
784.00 2453.92
645.00 4037.70
6491.62 W
64.92
6556.54 X
921.19
7477.73 Y
1121.66
8599.39 Z
85.99
8685.38
552.86
552.85
Rate Amount
784.00 1960.00
645.00 3225.00
5185.00 W
51.85
5236.85 X
735.78
5972.63 Y
895.89
6868.52 Z
68.69
6937.21
441.58
441.60
Rate Amount
784.00 1960.00
645.00 3225.00
5185.00 W
51.85
5236.85 X
735.78
5972.63 Y
895.89
6868.52 Z
68.69
6937.21
441.58
441.60
Rate Amount
5000.00 2900.00
145.72 8.45
10.00 28.00
32.00 8.96
30.00 8.40
2.12 3.86
2.12 28.66
784.00 313.60
784.00 940.80
714.00 571.20
645.00 1548.00
6359.93 W
63.60
6423.53 X
902.51
7326.04 Y
1098.91
8424.94 Z
84.25
8509.19
822.14
822.15
Rate Amount
5000.00 2350.00
145.72 6.85
10.00 28.00
32.00 8.96
30.00 8.40
2.12 3.86
2.12 28.66
784.00 313.60
784.00 940.80
714.00 571.20
645.00 1548.00
5808.33 W
58.08
5866.41 X
824.23
6690.64 Y
1003.60
7694.24 Z
76.94
7771.18
750.84
750.85
Rate Amount
5000.00 6110.00
145.72 17.49
10.00 12.00
32.00 3.84
30.00 3.60
2.12 1.93
2.12 28.66
784.00 313.60
784.00 940.80
714.00 571.20
645.00 1548.00
9551.12 W
95.51
9646.63 X
1355.35
11001.98 Y
1650.30
12652.28 Z
126.52
12778.80
1370.38
1370.40
Rate Amount
5000.00 2105.50
145.72 5.97
10.00 6.00
21.00 1.26
30.00 1.80
2.12 0.83
2.12 22.87
784.00 392.00
784.00 1160.32
714.00 714.00
645.00 1935.00
6345.56 W
63.46
6409.01 X
900.47
7309.48 Y
1096.42
8405.90 Z
84.06
8489.96
700.20
700.20
Rate Amount
5000.00 1582.00
145.72 4.60
4850.00 363.27
38.00 76.00
9.00 270.00
21.00 14.70
30.00 12.00
2.12 5.79
2.12 11.30
784.00 392.00
645.00 322.50
2.12 26.73
784.00 219.52
784.00 658.56
714.00 442.68
645.00 1083.60
5485.25 W
54.85
5540.10 X
778.38
6318.49 Y
947.77
7266.26 Z
72.66
7338.92
811.83
811.85
Rate Amount
5000.00 1182.00
145.72 3.44
4850.00 363.27
38.00 76.00
9.00 270.00
21.00 14.70
30.00 12.00
2.12 5.79
2.12 11.30
784.00 392.00
645.00 322.50
2.12 26.73
784.00 219.52
784.00 658.56
714.00 442.68
645.00 1083.60
5084.08 W
50.84
5134.93 X
721.46
5856.38 Y
878.46
6734.84 Z
67.35
6802.19
752.45
752.45
Rate Amount
225.00 53534.25
145.72 463.97
120.00 5712.00
30.00 142.80
35.00 166.60
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
74648.11 W
746.48
75394.59 X
10592.94
85987.53 Y
12898.13
98885.66 Z
988.86
99874.52
462.08
462.10
Rate Amount
784.00 94.08
645.00 77.40
171.48 W
1.71
173.19 X
24.33
197.53 Y
29.63
227.16 Z
2.27
229.43
76.48
76.50
Rate Amount
784.00 784.00
645.00 645.00
1429.00 W
14.29
1443.29 X
202.78
1646.07 Y
246.91
1892.98 Z
18.93
1911.91
211.26
211.25
Rate Amount
4850.00 2902.73
145.72 8.74
2.12 43.82
784.00 392.00
645.00 322.50
3669.79 W
36.70
3706.49 X
520.76
4227.25 Y
634.09
4861.34 Z
48.61
4909.95
163.66
163.65
Rate Amount
210.00 5111.19
2.12 28.66
2.12 14.33
784.00 109.76
714.00 392.70
645.00 1057.80
6714.44 W
67.14
6781.59 X
952.81
7734.40 Y
1160.16
8894.56 Z
88.95
8983.51
444.73
444.75
Rate Amount
210.00 5111.19
2.12 28.66
2.12 14.33
784.00 109.76
714.00 392.70
645.00 1057.80
6714.44 W
67.14
6781.59 X
952.81
7734.40 Y
1160.16
8894.56 Z
88.95
8983.51
444.73
444.75
Rate Amount
210.00 5918.22
2.12 34.17
2.12 15.16
784.00 109.76
714.00 392.70
645.00 1057.80
7527.81 W
75.28
7603.09 X
1068.23
8671.32 Y
1300.70
9972.02 Z
99.72
10071.74
498.60
498.60
Rate Amount
210.00 5111.19
2.12 14.33
2.12 14.06
784.00 109.76
714.00 392.70
645.00 1057.80
6699.84 W
67.00
6766.84 X
950.74
7717.58 Y
1157.64
8875.21 Z
88.75
8963.96
443.76
443.75
Rate Amount
200.00 4704.00
2.12 6.89
2.12 6.89
784.00 54.88
714.00 199.92
645.00 528.90
5501.48 W
55.01
5556.49 X
780.69
6337.18 Y
950.58
7287.76 Z
72.88
7360.64
364.39
364.40
Rate Amount
175.00 3675.00
2.12 6.89
2.12 6.89
784.00 54.88
714.00 199.92
645.00 528.90
4472.48 W
44.72
4517.20 X
634.67
5151.87 Y
772.78
5924.65 Z
59.25
5983.90
296.23
296.25
Rate Amount
280.00 5974.08
120.00 480.00
35.00 14.00
30.00 12.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
7451.85 W
74.52
7526.37 X
1057.46
8583.83 Y
1287.57
9871.40 Z
98.71
9970.12
493.57
493.55
Rate Amount
310.00 6614.16
120.00 480.00
35.00 14.00
30.00 12.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
8091.93 W
80.92
8172.85 X
1148.29
9321.14 Y
1398.17
10719.31 Z
107.19
10826.50
535.97
535.95
Rate Amount
400.00 4200.00
10.00 5.00
32.00 3.20
30.00 1.50
2.12 19.84
2.12 14.33
784.00 31.36
714.00 42.84
645.00 258.00
4576.07 W
45.76
4621.84 X
649.37
5271.20 Y
790.68
6061.88 Z
60.62
6122.50
631.19
631.20
Rate Amount
165.00 173.25
2.12 22.87
196.12 W
1.96
198.09 X
27.83
225.92 Y
33.89
259.80 Z
2.60
262.40
262.40
Rate Amount
555.00 11655.00
120.00 480.00
35.00 14.00
30.00 12.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
13132.77 W
131.33
13264.10 X
1863.61
15127.71 Y
2269.16
17396.86 Z
173.97
17570.83
878.54
878.55
Rate Amount
260.00 1365.00
2.12 22.87
20.00 120.00
6.00 36.00
30.00 5.40
21.00 7.56
2.12 5.79
2.12 28.39
784.00 784.00
645.00 645.00
784.00 94.08
3114.09 W
31.14
3145.23 X
441.90
3587.13 Y
538.07
4125.21 Z
41.25
4166.46
476.71
476.70
Rate Amount
4850.00 564.06
10.00 38.00
21.00 3.99
2.12 2.20
784.00 297.92
645.00 245.10
1151.27 W
11.51
1162.78 X
163.37
1326.15 Y
198.92
1525.08 Z
15.25
1540.33
77.02
77.00
Rate Amount
25614.00 435.44
50.00 61.00
440.00 15.40
163.93 2.79
1500.00 90.00
163.93 9.84
645.00 245.10
714.00 107.10
2.12 28.66
995.32 W
9.95
1005.28 X
141.24
1146.52 Y
171.98
1318.50 Z
13.18
1331.68
133.17
133.15
Rate Amount
165.00 207.41
823.15 216.49
500.00 50.00
2.12 11.30
2.12 17.09
2.12 5.79
4600.00 1748.00
262.29 99.67
4382.15 267.31
35.00 0.21
2.12 14.33
714.00 928.20
645.00 2418.75
714.00 785.40
6769.94 W
67.70
6837.64 X
960.69
7798.33 Y
1169.75
8968.08 Z
89.68
9057.76
905.78
905.80
Rate Amount
165.00 207.41
823.15 216.49
500.00 50.00
2.12 11.30
2.12 17.09
2.12 5.79
4600.00 1748.00
262.29 99.67
4382.15 267.31
35.00 0.21
2.12 14.33
714.00 928.20
645.00 2418.75
714.00 785.40
6769.94 W
67.70
6837.64 X
960.69
7798.33 Y
1169.75
8968.08 Z
89.68
9057.76
905.78
905.80
Rate Amount
165.00 21.45
645.00 45.15
714.00 28.56
2.12 57.05
152.21 W
1.52
153.73 X
21.60
175.33 Y
26.30
201.63 Z
2.02
203.65
20.36
20.35
Rate Amount
4600.00 1748.00
262.29 99.67
4382.15 784.40
35.00 0.18
714.00 578.34
645.00 696.60
714.00 192.78
2.12 3.86
4103.83 W
41.04
4144.87 X
582.35
4727.22 Y
709.08
5436.30 Z
54.36
5490.67
549.07
549.05
Rate Amount
8000.00 1280.00
262.29 41.97
4355.20 161.14
35.00 0.35
4355.20 975.56
784.00 470.40
645.00 1677.00
2.12 27.56
4633.98 W
46.34
4680.32 X
657.59
5337.91 Y
800.69
6138.60 Z
61.39
6199.98
620.00
620.00
Rate Amount
1350.00 112.86
163.93 13.70
1500.00 62.70
163.93 6.85
5000.00 150.00
145.72 4.37
645.00 54.83
645.00 36.12
714.00 17.85
784.00 3.92
714.00 3.57
714.00 2.64
2.12 5.24
2.12 2.76
784.00 117.60
714.00 107.10
2.12 10.75
784.00 196.00
714.00 178.50
645.00 645.00
2.12 17.09
4382.15 39.44
749.00 60.67
645.00 65.15
714.00 23.56
2.12 3.58
2.12 3.03
1944.87 W
19.45
1964.32 X
275.99
2240.31 Y
336.05
2576.36 Z
25.76
2602.12
260.21
260.20
Rate Amount
1400.00 9.38
1350.00 2.97
163.93 1.46
1500.00 6.60
163.93 0.72
5000.00 16.00
145.72 0.47
645.00 5.81
645.00 3.87
714.00 1.93
784.00 0.39
714.00 0.36
714.00 0.29
2.12 0.55
2.12 0.28
45.00 45.00
5024.15 20.60
749.00 17.60
645.00 15.16
714.00 5.57
2.12 0.83
5000.00 3.00
145.72 0.09
749.00 5.99
645.00 5.16
2.12 0.55
2.12 28.66
199.27 W
1.99
201.26 X
28.28
229.54 Y
34.43
263.97 Z
2.64
266.61
266.60
Rate Amount
260.00 2860.00
145.72 185.06
4355.20 41.37
4382.15 32.87
749.00 1138.48
714.00 1299.48
645.00 980.40
714.00 214.20
2.12 34.17
6786.04 W
67.86
6853.90 X
962.97
7816.87 Y
1172.53
8989.40 Z
89.89
9079.30
907.93
907.95
Rate Amount
280.00 3080.00
145.72 185.06
4355.20 41.37
749.00 1138.48
714.00 1299.48
645.00 980.40
714.00 214.20
2.12 34.17
4382.15 32.87
7006.04 W
70.06
7076.10 X
994.19
8070.29 Y
1210.54
9280.84 Z
92.81
9373.64
937.36
937.35
Rate Amount
210.00 2310.00
2.12 37.21
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
5785.99 W
57.86
5843.85 X
821.06
6664.91 Y
999.74
7664.65 Z
76.65
7741.30
774.13
774.15
Rate Amount
235.00 2585.00
2.12 37.21
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
6060.99 W
60.61
6121.60 X
860.09
6981.69 Y
1047.25
8028.94 Z
80.29
8109.23
810.92
810.90
Rate Amount
320.00 3520.00
2.12 37.21
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
6995.99 W
69.96
7065.95 X
992.77
8058.72 Y
1208.81
9267.53 Z
92.68
9360.20
936.02
936.00
Rate Amount
288.00 3168.00
2.12 31.69
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
6638.48 W
66.38
6704.86 X
942.03
7646.89 Y
1147.03
8793.92 Z
87.94
8881.86
888.19
888.20
Rate Amount
210.00 2310.00
2.12 31.69
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
5780.48 W
57.80
5838.28 X
820.28
6658.56 Y
998.78
7657.34 Z
76.57
7733.91
773.39
773.40
Rate Amount
195.00 2145.00
2.12 31.69
2.12 57.05
784.00 1960.00
645.00 1290.00
2.12 65.87
2.12 65.87
5615.48 W
56.15
5671.63 X
796.86
6468.49 Y
970.27
7438.76 Z
74.39
7513.15
751.32
751.30
Rate Amount
791.00 3401.30
187.35 7.68
60.00 18.60
784.00 2077.60
714.00 103.53
645.00 1799.55
2.12 16.54
2.12 31.14
7455.94 W
74.56
7530.50 X
1058.04
8588.54 Y
1288.28
9876.82 Z
98.77
9975.59
634.98
635.00
Rate Amount
210.00 451.50
2.12 7.17
2.12 11.30
784.00 384.16
645.00 251.55
2.12 12.95
2.12 12.95
784.00 1960.00
645.00 1612.50
2.12 22.87
4726.95 W
47.27
4774.22 X
670.78
5445.00 Y
816.75
6261.75 Z
62.62
6324.37
402.57
402.55
Rate Amount
235.00 505.25
2.12 7.17
2.12 11.30
784.00 384.16
645.00 251.55
2.12 12.95
2.12 12.95
784.00 1960.00
645.00 1612.50
2.12 22.87
4780.70 W
47.81
4828.51 X
678.41
5506.92 Y
826.04
6332.96 Z
63.33
6396.29
407.15
407.15
Rate Amount
320.00 688.00
2.12 7.17
2.12 11.30
784.00 384.16
645.00 251.55
2.12 12.95
2.12 12.95
784.00 1960.00
645.00 1612.50
2.12 22.87
4963.45 W
49.63
5013.08 X
704.34
5717.42 Y
857.61
6575.03 Z
65.75
6640.78
422.71
422.70
Rate Amount
135.00 290.25
2.12 5.79
2.12 11.30
784.00 384.16
645.00 251.55
2.12 12.95
2.12 12.95
784.00 1960.00
645.00 1612.50
2.12 22.87
4564.32 W
45.64
4609.96 X
647.70
5257.66 Y
788.65
6046.31 Z
60.46
6106.77
388.72
388.70
Rate Amount
210.00 451.50
2.12 6.06
2.12 11.30
784.00 384.16
645.00 251.55
2.12 12.95
2.12 12.95
784.00 1960.00
645.00 1612.50
2.12 22.87
4725.84 W
47.26
4773.10 X
670.62
5443.72 Y
816.56
6260.28 Z
62.60
6322.88
402.47
402.45
Rate Amount
784.00 784.00
714.00 714.00
645.00 1290.00
2788.00 W
27.88
2815.88 X
395.63
3211.51 Y
481.73
3693.24 Z
36.93
3730.17
373.02
373.00
Rate Amount
300.00 1425.60
187.35 8.90
58.00 43.50
42.00 428.40
5.00 1098.80
145.72 32.06
2.12 5.79
784.00 1254.40
645.00 1032.00
784.00 2532.32
645.00 2083.35
714.00 385.56
2.12 178.04
2.12 114.10
10622.82 W
106.23
10729.05 X
1507.43
12236.48 Y
1835.47
14071.95 Z
140.72
14212.67
1421.27
1421.25
Rate Amount
300.00 1425.60
187.35 8.90
58.00 43.50
42.00 428.40
5.00 1098.80
145.72 32.06
2.12 5.79
784.00 1254.40
645.00 1032.00
784.00 2532.32
645.00 2083.35
714.00 385.56
2.12 178.04
2.12 114.10
784.00 392.00
784.00 784.00
645.00 967.50
12766.32 W
127.66
12893.98 X
1811.60
14705.58 Y
2205.84
16911.42 Z
169.11
17080.53
1708.05
1708.05
Rate Amount
5.00 549.40
145.72 16.03
784.00 1568.00
645.00 1290.00
714.00 178.50
2.12 28.66
3630.59 W
36.31
3666.90 X
515.20
4182.10 Y
627.32
4809.42 Z
48.09
4857.51
485.75
485.75
Rate Amount
2.12 28.66
784.00 784.00
645.00 645.00
714.00 178.50
1636.16 W
16.36
1652.52 X
232.18
1884.70 Y
282.71
2167.41 Z
21.67
2189.08
218.91
218.90
Rate Amount
130.00 1430.00
2.12 220.48
2.12 744.12
784.00 784.00
645.00 1290.00
4468.60 W
44.69
4513.29 X
634.12
5147.41 Y
772.11
5919.52 Z
59.20
5978.72
597.87
597.85
Rate Amount
90.00 990.00
2.12 110.24
784.00 392.00
645.00 322.50
1814.74 W
18.15
1832.89 X
257.52
2090.41 Y
313.56
2403.97 Z
24.04
2428.01
242.80
242.80
Rate Amount
120.00 1320.00
29.00 7.25
2.12 27.56
784.00 392.00
645.00 322.50
2069.31 W
20.69
2090.00 X
293.65
2383.65 Y
357.55
2741.20 Z
27.41
2768.61
276.86
276.85
Rate Amount
140.00 1540.00
29.00 7.25
2.12 27.56
784.00 392.00
645.00 322.50
2289.31 W
22.89
2312.20 X
324.86
2637.07 Y
395.56
3032.63 Z
30.33
3062.95
306.30
306.30
Rate Amount
45.00 450.00
2.12 28.66
2.12 28.66
714.00 285.60
645.00 258.00
2.12 11.30
1062.22 W
10.62
1072.85 X
150.73
1223.58 Y
183.54
1407.12 Z
14.07
1421.19
142.12
142.10
Rate Amount
30.00 150.00
2.12 5.24
2.12 15.16
784.00 98.00
714.00 535.50
645.00 322.50
1400.00 4.62
1350.00 1.49
163.93 0.72
1500.00 3.30
163.93 0.36
5000.00 8.00
145.72 0.23
645.00 2.90
645.00 2.06
714.00 1.00
784.00 0.24
714.00 0.21
714.00 0.14
2.12 0.55
2.12 0.28
2.12 0.28
1152.78 W
11.53
1164.30 X
163.58
1327.89 Y
199.18
1527.07 Z
15.27
1542.34
308.47
308.45
Rate Amount
45.00 225.00
2.12 5.24
2.12 15.16
784.00 98.00
714.00 535.50
645.00 322.50
1400.00 4.62
1350.00 1.49
163.93 0.72
1500.00 3.30
163.93 0.36
5000.00 8.00
145.72 0.23
645.00 2.90
645.00 2.06
714.00 1.00
784.00 0.24
714.00 0.21
714.00 0.14
2.12 0.55
2.12 0.28
2.12 0.28
1227.78 W
12.28
1240.05 X
174.23
1414.28 Y
212.14
1626.42 Z
16.26
1642.69
328.54
328.55
Rate Amount
130.00 127.40
50.00 5.50
2.12 28.66
2.12 3.03
784.00 47.04
714.00 42.84
645.00 77.40
331.87 W
3.32
335.19 X
47.09
382.29 Y
57.34
439.63 Z
4.40
444.03
444.05
Rate Amount
130.00 192.40
50.00 8.50
2.12 28.66
2.12 5.79
784.00 62.72
714.00 57.12
645.00 96.75
451.94 W
4.52
456.46 X
64.13
520.59 Y
78.09
598.68 Z
5.99
604.67
604.65
Rate Amount
285.00 285.00
2.12 37.21
322.21 W
3.22
325.43 X
45.72
371.15 Y
55.67
426.82 Z
4.27
431.09
431.10
Rate Amount
70.00 420.00
8.00 8.00
2.12 28.66
2.12 14.33
784.00 148.96
645.00 238.65
714.00 57.12
2.12 39.41
955.13 W
9.55
964.69 X
135.54
1100.22 Y
165.03
1265.26 Z
12.65
1277.91
212.99
213.00
Rate Amount
130.00 780.00
11.00 11.00
2.12 37.21
2.12 17.09
784.00 180.32
645.00 290.25
714.00 78.54
2.12 39.41
1433.81 W
14.34
1448.15 X
203.47
1651.62 Y
247.74
1899.36 Z
18.99
1918.35
319.73
319.75
Rate Amount
18.00 18.00
8.00 16.00
2.12 5.79
2.12 19.84
59.63 W
0.60
60.23 X
8.46
68.69 Y
10.30
78.99 Z
0.79
79.78
79.80
Rate Amount
39.00 39.00
11.00 22.00
2.12 5.79
2.12 22.87
89.66 W
0.90
90.56 X
12.72
103.28 Y
15.49
118.77 Z
1.19
119.96
119.95
Rate Amount
18.00 18.00
8.00 16.00
2.12 5.79
2.12 19.84
59.63 W
0.60
60.23 X
8.46
68.69 Y
10.30
78.99 Z
0.79
79.78
79.80
Rate Amount
32.00 32.00
11.00 22.00
2.12 5.79
2.12 22.87
82.66 W
0.83
83.49 X
11.73
95.22 Y
14.28
109.50 Z
1.10
110.60
110.60
Rate Amount
59.00 59.00
8.00 24.00
2.12 22.81
105.81 W
1.06
106.87 X
15.02
121.88 Y
18.28
140.17 Z
1.40
141.57
141.55
Rate Amount
92.00 92.00
11.00 33.00
2.12 28.56
153.56 W
1.54
155.09 X
21.79
176.88 Y
26.53
203.41 Z
2.03
205.45
205.45
Rate Amount
46.00 46.00
8.00 24.00
2.12 22.81
92.81 W
0.93
93.74 X
13.17
106.91 Y
16.04
122.95 Z
1.23
124.18
124.20
Rate Amount
81.00 81.00
11.00 33.00
2.12 28.56
142.56 W
1.43
143.98 X
20.23
164.21 Y
24.63
188.84 Z
1.89
190.73
190.75
Rate Amount
35.00 35.00
8.00 8.00
2.12 5.79
2.12 19.84
68.63 W
0.69
69.32 X
9.74
79.06 Y
11.86
90.91 Z
0.91
91.82
91.80
Rate Amount
59.00 59.00
11.00 11.00
2.12 5.79
2.12 22.87
98.66 W
0.99
99.65 X
14.00
113.65 Y
17.05
130.70 Z
1.31
132.00
132.00
Rate Amount
27.00 27.00
8.00 8.00
2.12 5.79
2.12 19.84
60.63 W
0.61
61.24 X
8.60
69.84 Y
10.48
80.32 Z
0.80
81.12
81.10
Rate Amount
47.00 47.00
11.00 11.00
2.12 5.79
2.12 22.87
86.66 W
0.87
87.53 X
12.30
99.83 Y
14.97
114.80 Z
1.15
115.95
115.95
Rate Amount
15.00 75.00
2.12 5.24
10.00 100.00
784.00 98.00
714.00 535.50
645.00 322.50
2.12 15.16
2.12 1.93
2.12 8.27
1161.59 W
11.62
1173.21 X
164.84
1338.04 Y
200.71
1538.75 Z
15.39
1554.14
310.83
310.85
Rate Amount
14.00 70.00
2.12 5.24
10.00 100.00
784.00 98.00
714.00 535.50
645.00 322.50
2.12 15.16
2.12 1.93
2.12 8.27
1156.59 W
11.57
1168.16 X
164.13
1332.28 Y
199.84
1532.13 Z
15.32
1547.45
309.49
309.50
Rate Amount
27.00 27.00
2.12 8.82
35.82 W
0.36
36.18 X
5.08
41.26 Y
6.19
47.45 Z
0.47
47.92
47.90
Rate Amount
140.00 15240.40
46.00 10954.44
22.00 920.48
38.00 3447.36
12.00 129.60
4.00 756.00
38.00 820.80
3.00 216.00
58.00 580.00
24.00 547.44
21.00 718.41
90.00 114.30
70.00 1306.20
10.00 720.00
2.12 1711.48
2.12 948.06
714.00 22208.26
645.00 20062.08
714.00 7402.75
88804.06 W
888.04
89692.10 X
12601.74
102293.84 Y
15344.08
117637.92 Z
1176.38
118814.30
1145.97
1145.95
Rate Amount
240.00 26126.40
46.00 10954.44
22.00 920.48
38.00 3447.36
12.00 129.60
4.00 756.00
38.00 820.80
3.00 216.00
58.00 580.00
24.00 547.44
21.00 718.41
90.00 114.30
70.00 1306.20
10.00 720.00
2.12 1711.48
2.12 948.06
714.00 22208.26
645.00 20062.08
714.00 7404.18
99691.49 W
996.91
100688.40 X
14146.72
114835.12 Y
17225.27
132060.39 Z
1320.60
133380.99
1286.47
1286.45
Rate Amount
250.00 27215.00
46.00 10954.44
22.00 920.48
38.00 3447.36
12.00 129.60
4.00 756.00
38.00 820.80
3.00 216.00
58.00 580.00
24.00 547.44
21.00 718.41
90.00 114.30
70.00 1306.20
10.00 720.00
2.12 1711.48
2.12 948.06
714.00 22208.26
645.00 20062.08
714.00 7404.18
100780.09 W
1007.80
101787.89 X
14301.20
116089.09 Y
17413.36
133502.45 Z
1335.02
134837.47
1300.52
1300.50
Rate Amount
380.00 41366.80
46.00 10954.44
22.00 920.48
38.00 3447.36
12.00 129.60
4.00 756.00
38.00 820.80
3.00 216.00
58.00 580.00
24.00 547.44
21.00 718.41
90.00 114.30
70.00 1306.20
10.00 720.00
2.12 1711.48
2.12 948.06
714.00 22208.26
645.00 20062.08
714.00 7404.18
114931.89 W
1149.32
116081.21 X
16309.41
132390.62 Y
19858.59
152249.21 Z
1522.49
153771.70
1483.14
1483.15
Rate Amount
45.00 45.00
2.12 8.82
53.82 W
0.54
54.36 X
7.64
61.99 Y
9.30
71.29 Z
0.71
72.01
72.00
Rate Amount
525.00 126214.20
2.12 220.48
38.00 3359.20
120.00 9720.00
21.00 355.74
30.00 508.20
2.12 57.05
2.12 114.10
784.00 1019.20
714.00 11067.00
645.00 9997.50
162632.67 W
1626.33
164258.99 X
23078.39
187337.38 Y
28100.61
215437.99 Z
2154.38
217592.37
1179.25
1179.25
Rate Amount
450.00 108183.60
2.12 220.48
38.00 3359.20
120.00 9720.00
21.00 355.74
30.00 508.20
2.12 57.05
2.12 114.10
784.00 1019.20
714.00 11067.00
645.00 9997.50
144602.07 W
1446.02
146048.09 X
20519.76
166567.84 Y
24985.18
191553.02 Z
1915.53
193468.55
1048.51
1048.50
Rate Amount
8.00 1280.00
262.29 41.97
784.00 235.20
645.00 1006.20
2.12 27.56
2590.93 W
25.91
2616.84 X
367.67
2984.50 Y
447.68
3432.18 Z
34.32
3466.50
346.65
346.65
Rate Amount
8.00 96.00
262.29 3.15
784.00 7.84
645.00 96.75
2.12 5.51
209.25 W
2.09
211.34 X
29.69
241.04 Y
36.16
277.19 Z
2.77
279.96
77.77
77.75
Rate Amount
375.00 87618.75
2.12 220.48
120.00 5712.00
30.00 142.80
35.00 166.60
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
108489.12 W
1084.89
109574.01 X
15395.15
124969.16 Y
18745.37
143714.53 Z
1437.15
145151.68
671.56
671.55
Rate Amount
225.00 5199.75
2.12 28.66
2.12 14.33
784.00 109.76
714.00 392.70
645.00 1057.80
6803.00 W
68.03
6871.03 X
965.38
7836.41 Y
1175.46
9011.88 Z
90.12
9101.99
450.59
450.60
Rate Amount
235.20 5435.47
2.12 6.89
2.12 6.89
784.00 54.88
714.00 199.92
645.00 528.90
6232.95 W
62.33
6295.28 X
884.49
7179.77 Y
1076.97
8256.73 Z
82.57
8339.30
412.84
412.85
Rate Amount
240.00 5546.40
120.00 480.00
35.00 14.00
30.00 12.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
7024.17 W
70.24
7094.42 X
996.77
8091.18 Y
1213.68
9304.86 Z
93.05
9397.91
465.24
465.25
Rate Amount
230.00 1987.20
10.00 5.00
32.00 3.20
30.00 1.50
2.12 19.84
2.12 14.33
784.00 31.36
714.00 42.84
645.00 258.00
2363.27 W
23.63
2386.91 X
335.36
2722.27 Y
408.34
3130.61 Z
31.31
3161.91
384.19
384.20
Rate Amount
235.00 5283.51
120.00 480.00
35.00 14.00
30.00 12.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
6761.28 W
67.61
6828.89 X
959.46
7788.35 Y
1168.25
8956.60 Z
89.57
9046.17
422.48
422.50
Rate Amount
440.00 4400.00
2.12 2.20
4850.00 363.27
38.00 76.00
9.00 270.00
21.00 14.70
30.00 12.00
2.12 5.79
2.12 11.30
784.00 392.00
645.00 322.50
2.12 26.73
784.00 219.52
784.00 658.56
714.00 442.68
645.00 1083.60
8300.85 W
83.01
8383.86 X
1177.93
9561.79 Y
1434.27
10996.06 Z
109.96
11106.02
1110.60
1110.60
Rate Amount
625.00 65625.00
130.00 3835.00
80.00 1080.00
40.00 5880.00
20.00 2940.00
10.00 720.00
6.00 432.00
5.00 360.00
10.00 720.00
2.12 398.45
2.12 189.27
784.00 21952.00
645.00 14835.00
118966.72 W
1189.67
120156.39 X
16881.97
137038.36 Y
20555.75
157594.11 Z
1575.94
159170.05
1591.70
1591.70
Rate Amount
735.00 77175.00
130.00 3835.00
80.00 1080.00
40.00 5880.00
20.00 2940.00
10.00 720.00
6.00 432.00
5.00 360.00
10.00 720.00
2.12 398.45
2.12 189.27
784.00 21952.00
645.00 14835.00
130516.72 W
1305.17
131821.89 X
18520.98
150342.87 Y
22551.43
172894.30 Z
1728.94
174623.24
1746.23
1746.25
Rate Amount
880.00 92400.00
130.00 3835.00
80.00 1080.00
40.00 5880.00
20.00 2940.00
10.00 720.00
6.00 432.00
5.00 360.00
10.00 720.00
2.12 398.45
2.12 189.27
784.00 21952.00
645.00 14835.00
145741.72 W
1457.42
147199.14 X
20681.48
167880.62 Y
25182.09
193062.71 Z
1930.63
194993.34
1949.93
1949.95
Rate Amount
380.00 39900.00
130.00 3835.00
80.00 1080.00
40.00 5880.00
20.00 2940.00
10.00 720.00
6.00 432.00
5.00 360.00
10.00 720.00
2.12 398.45
2.12 189.27
784.00 21952.00
645.00 14835.00
93241.72 W
932.42
94174.14 X
13231.47
107405.61 Y
16110.84
123516.45 Z
1235.16
124751.61
1247.52
1247.50
Rate Amount
685.00 71925.00
140.00 4130.00
90.00 1215.00
45.00 6615.00
22.00 3234.00
10.00 720.00
6.00 432.00
10.00 720.00
5.00 360.00
1.00 100.00
2.12 1057.14
2.12 503.46
2.12 658.68
784.00 21952.00
645.00 14835.00
128457.28 W
1284.57
129741.85 X
18228.73
147970.58 Y
22195.59
170166.17 Z
1701.66
171867.83
1718.68
1718.70
Rate Amount
710.00 74550.00
220.00 13200.00
110.00 3047.00
130.00 4290.00
5.00 220.00
12.00 528.00
10.00 880.00
10.00 3330.00
10.00 800.00
6.00 480.00
5.00 400.00
10.00 800.00
2.12 398.56
2.12 190.80
784.00 21952.00
645.00 14835.00
139901.36 W
1399.01
141300.37 X
19852.70
161153.08 Y
24172.96
185326.04 Z
1853.26
187179.30
1871.79
1871.80
Rate Amount
800.00 84000.00
220.00 13200.00
110.00 3047.00
130.00 4290.00
5.00 220.00
12.00 528.00
10.00 880.00
10.00 3330.00
10.00 800.00
6.00 480.00
5.00 400.00
10.00 800.00
2.12 398.56
2.12 190.80
784.00 21952.00
645.00 14835.00
149351.36 W
1493.51
150844.87 X
21193.70
172038.58 Y
25805.79
197844.37 Z
1978.44
199822.81
1998.23
1998.25
Rate Amount
409.00 4212.70
4355.20 975.56
5000.00 220.00
11200.00 492.80
145.72 12.82
60.00 184.80
714.00 1142.40
645.00 1290.00
714.00 714.00
714.00 714.00
300.00 480.00
2.12 360.36
10799.45 W
107.99
10907.44 X
1532.50
12439.94 Y
1865.99
14305.93 Z
143.06
14448.99
1444.90
1444.90
Rate Amount
50.00 50.00
350.00 385.00
26.00 26.00
2.12 14.23
2.12 42.68
12.00 12.00
2.12 94.70
2.12 29.15
2.12 45.54
2.12 35.57
2.12 170.74
2.12 113.82
1019.43 W
10.19
1029.62 X
144.66
1174.29 Y
176.14
1350.43 Z
13.50
1363.93
1363.95
Rate Amount
130.00 1430.00
2.12 110.24
784.00 392.00
645.00 322.50
2.12 42.40
2297.14 W
22.97
2320.11 X
325.98
2646.09 Y
396.91
3043.00 Z
30.43
3073.43
307.34
307.35
Rate Amount
850.00 85042.50
130.00 3835.00
80.00 1080.00
40.00 5880.00
20.00 2940.00
10.00 720.00
6.00 432.00
5.00 360.00
10.00 720.00
2.12 189.27
2.12 398.45
784.00 21952.00
645.00 14835.00
138384.23 W
1383.84
139768.07 X
19637.41
159405.48 Y
23910.82
183316.31 Z
1833.16
185149.47
1851.49
1851.50
Rate Amount
270.00 29392.20
46.00 10954.44
22.00 920.48
38.00 3447.36
12.00 129.60
4.00 756.00
38.00 820.80
5.00 360.00
58.00 580.00
24.00 547.44
21.00 718.41
10.00 720.00
90.00 114.30
70.00 1306.20
2.12 948.06
2.12 1711.48
714.00 22205.40
645.00 20059.50
714.00 7404.18
103095.85 W
1030.96
104126.81 X
14629.82
118756.63 Y
17813.49
136570.12 Z
1365.70
137935.82
1330.40
1330.40
Rate Amount
110.00 1210.00
2.12 220.48
2.12 744.12
784.00 784.00
645.00 1290.00
4248.60 W
42.49
4291.09 X
602.90
4893.98 Y
734.10
5628.08 Z
56.28
5684.36
568.44
568.45
Rate Amount
110.00 1210.00
2.12 110.24
784.00 392.00
645.00 322.50
2034.74 W
20.35
2055.09 X
288.74
2343.83 Y
351.57
2695.40 Z
26.95
2722.36
272.24
272.25
Rate Amount
110.00 1210.00
2.12 110.24
0.00
784.00 392.00
645.00 322.50
2.12 42.40
2077.14 W
20.77
2097.91 X
294.76
2392.67 Y
358.90
2751.57 Z
27.52
2779.09
277.91
277.90
Rate Amount
215.00 1541.55
2.12 9.60
645.00 348.30
714.00 385.56
2.12 28.66
2313.67 W
23.14
2336.81 X
328.32
2665.13 Y
399.77
3064.90 Z
30.65
3095.55
309.56
309.55
Rate Amount
549.00 132144.30
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
151318.27 W
1513.18
152831.45 X
21472.82
174304.27 Y
26145.64
200449.91 Z
2004.50
202454.41
936.68
936.70
Rate Amount
698.00 168008.60
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
187182.57 W
1871.83
189054.40 X
26562.14
215616.54 Y
32342.48
247959.02 Z
2479.59
250438.61
1158.69
1158.70
Rate Amount
895.00 215426.50
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
234600.47 W
2346.00
236946.47 X
33290.98
270237.45 Y
40535.62
310773.07 Z
3107.73
313880.80
1452.21
1452.20
Rate Amount
730.00 174878.80
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
194052.77 W
1940.53
195993.30 X
27537.06
223530.36 Y
33529.55
257059.91 Z
2570.60
259630.51
1201.21
1201.20
Rate Amount
924.00 221353.44
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
240527.41 W
2405.27
242932.68 X
34132.04
277064.72 Y
41559.71
318624.43 Z
3186.24
321810.67
1488.90
1488.90
Rate Amount
1182.00 283159.92
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
302333.89 W
3023.34
305357.23 X
42902.69
348259.92 Y
52238.99
400498.91 Z
4004.99
404503.90
1871.49
1871.50
Rate Amount
520.00 128944.40
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
148118.37 W
1481.18
149599.55 X
21018.74
170618.29 Y
25592.74
196211.03 Z
1962.11
198173.14
916.87
916.85
Rate Amount
670.00 166139.90
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
185313.87 W
1853.14
187167.01 X
26296.96
213463.97 Y
32019.60
245483.57 Z
2454.84
247938.41
1147.12
1147.10
Rate Amount
870.00 215733.90
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
234907.87 W
2349.08
237256.95 X
33334.60
270591.55 Y
40588.73
311180.28 Z
3111.80
314292.08
1454.11
1454.10
Rate Amount
636.00 153085.20
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1726.92
714.00 6341.86
645.00 5211.72
171012.05 W
1710.12
172722.17 X
24267.46
196989.63 Y
29548.44
226538.07 Z
2265.38
228803.45
1058.59
1058.60
Rate Amount
809.00 194726.30
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1726.92
714.00 6341.86
645.00 5211.72
212653.15 W
2126.53
214779.68 X
30176.55
244956.23 Y
36743.43
281699.66 Z
2817.00
284516.66
1316.35
1316.35
Rate Amount
1038.00 249846.60
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1726.92
714.00 6341.86
645.00 5211.72
267773.45 W
2677.73
270451.18 X
37998.39
308449.57 Y
46267.44
354717.01 Z
3547.17
358264.18
1657.56
1657.55
Rate Amount
846.00 202667.76
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
221841.73 W
2218.42
224060.15 X
31480.45
255540.60 Y
38331.09
293871.69 Z
2938.72
296810.41
1373.23
1373.25
Rate Amount
1071.00 256568.76
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
275742.73 W
2757.43
278500.16 X
39129.27
317629.43 Y
47644.41
365273.84 Z
3652.74
368926.58
1706.89
1706.90
Rate Amount
1370.00 328197.20
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
347371.17 W
3473.71
350844.88 X
49293.71
400138.59 Y
60020.79
460159.38 Z
4601.59
464760.97
2150.28
2150.30
Rate Amount
680.00 162730.80
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
181904.77 W
1819.05
183723.82 X
25813.20
209537.02 Y
31430.55
240967.57 Z
2409.68
243377.25
1126.02
1126.00
Rate Amount
872.00 208678.32
2.12 220.48
500.00 4325.00
2.12 17.09
2.12 83.78
784.00 1834.56
714.00 6668.76
645.00 6024.30
227852.29 W
2278.52
230130.81 X
32333.38
262464.19 Y
39369.63
301833.82 Z
3018.34
304852.16
1410.44
1410.45
Rate Amount
564.00 13034.04
2.12 28.66
2.12 14.33
784.00 109.76
714.00 392.70
645.00 1057.80
14637.29 W
146.37
14783.66 X
2077.10
16860.76 Y
2529.11
19389.87 Z
193.90
19583.77
969.49
969.50
Rate Amount
544.00 12571.84
2.12 6.89
2.12 6.89
784.00 54.88
714.00 199.92
645.00 528.90
13369.32 W
133.69
13503.01 X
1897.17
15400.18 Y
2310.03
17710.21 Z
177.10
17887.31
885.51
885.50
Rate Amount
584.00 13496.24
500.00 200.00
2.12 20.95
2.12 13.23
784.00 78.40
714.00 214.20
645.00 645.00
14668.02 W
146.68
14814.70 X
2081.47
16896.17 Y
2534.43
19430.60 Z
194.31
19624.91
971.53
971.55
Rate Amount
487.00 4207.68
10.00 5.00
32.00 3.20
40.00 20.00
2.12 19.84
2.12 14.33
784.00 31.36
714.00 42.84
645.00 258.00
4602.25 W
46.02
4648.27 X
653.08
5301.35 Y
795.20
6096.55 Z
60.97
6157.52
748.18
748.20
Rate Amount
538.00 12095.85
500.00 200.00
2.12 20.95
2.12 13.23
0.00
784.00 78.40
714.00 214.20
645.00 645.00
13267.63 W
132.68
13400.31 X
1882.74
15283.05 Y
2292.46
17575.51 Z
175.76
17751.27
829.03
829.05
Rate Amount
725.00 7250.00
2.12 2.20
4850.00 363.27
500.00 100.00
40.00 1200.00
2.12 5.79
2.12 11.30
784.00 392.00
645.00 322.50
2.12 26.73
784.00 219.52
784.00 658.56
714.00 442.68
645.00 1083.60
12078.15 W
120.78
12198.93 X
1713.95
13912.88 Y
2086.93
15999.81 Z
160.00
16159.81
1615.98
1616.00
Rate Amount
3713.20 534.70
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
2203.89 W
22.04
2225.93 X
312.74
2538.68 Y
380.80
2919.48 Z
29.19
2948.67
294.87
294.85
Rate Amount
3044.30 438.38
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
2107.57 W
21.08
2128.65 X
299.08
2427.72 Y
364.16
2791.88 Z
27.92
2819.80
281.98
282.00
Rate Amount
3713.20 638.67
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
2539.06 W
25.39
2564.45 X
360.31
2924.76 Y
438.71
3363.47 Z
33.63
3397.11
339.71
339.70
Rate Amount
3044.30 523.62
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
2424.01 W
24.24
2448.25 X
343.98
2792.23 Y
418.83
3211.07 Z
32.11
3243.18
324.32
324.30
Rate Amount
3713.20 831.76
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
3005.85 W
30.06
3035.91 X
426.55
3462.45 Y
519.37
3981.82 Z
39.82
4021.64
402.16
402.15
Rate Amount
3044.30 681.92
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
2856.02 W
28.56
2884.58 X
405.28
3289.86 Y
493.48
3783.34 Z
37.83
3821.17
382.12
382.10
Rate Amount
4355.20 627.15
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
2296.34 W
22.96
2319.31 X
325.86
2645.17 Y
396.78
3041.94 Z
30.42
3072.36
307.24
307.25
Rate Amount
3686.30 530.83
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
2200.02 W
22.00
2222.02 X
312.19
2534.21 Y
380.13
2914.35 Z
29.14
2943.49
294.35
294.35
Rate Amount
4355.20 749.09
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
2649.49 W
26.49
2675.98 X
375.98
3051.96 Y
457.79
3509.75 Z
35.10
3544.85
354.48
354.50
Rate Amount
3686.30 634.04
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
2534.44 W
25.34
2559.78 X
359.65
2919.43 Y
437.91
3357.34 Z
33.57
3390.92
339.09
339.10
Rate Amount
4355.20 975.56
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
3149.66 W
31.50
3181.15 X
446.95
3628.11 Y
544.22
4172.32 Z
41.72
4214.05
421.40
421.40
Rate Amount
3686.30 825.73
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
2999.82 W
30.00
3029.82 X
425.69
3455.51 Y
518.33
3973.84 Z
39.74
4013.58
401.36
401.35
Rate Amount
4382.15 631.03
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
2796.60 W
27.97
2824.57 X
396.85
3221.42 Y
483.21
3704.64 Z
37.05
3741.68
374.17
374.15
Rate Amount
3713.20 534.70
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
2700.28 W
27.00
2727.28 X
383.18
3110.46 Y
466.57
3577.03 Z
35.77
3612.80
361.28
361.30
Rate Amount
4382.15 753.73
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
3150.50 W
31.51
3182.01 X
447.07
3629.08 Y
544.36
4173.44 Z
41.73
4215.18
421.52
421.50
Rate Amount
3713.20 638.67
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
3035.45 W
30.35
3065.80 X
430.74
3496.54 Y
524.48
4021.03 Z
40.21
4061.24
406.12
406.10
Rate Amount
5024.15 723.48
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
2889.05 W
28.89
2917.94 X
409.97
3327.91 Y
499.19
3827.10 Z
38.27
3865.37
386.54
386.55
Rate Amount
5024.15 1125.41
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
3795.88 W
37.96
3833.84 X
538.65
4372.50 Y
655.87
5028.37 Z
50.28
5078.66
507.87
507.85
Rate Amount
5024.15 864.15
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
3260.93 W
32.61
3293.54 X
462.74
3756.28 Y
563.44
4319.72 Z
43.20
4362.92
436.29
436.30
Rate Amount
3995.00 575.28
3044.30 219.19
749.00 906.29
645.00 832.05
714.00 749.70
2.12 26.73
3309.24 W
33.09
3342.34 X
469.60
3811.93 Y
571.79
4383.72 Z
43.84
4427.56
442.76
442.75
Rate Amount
3995.00 575.28
5024.15 361.74
749.00 906.29
645.00 832.05
714.00 749.70
2.12 26.73
3451.79 W
34.52
3486.31 X
489.83
3976.14 Y
596.42
4572.56 Z
45.73
4618.28
461.83
461.85
Rate Amount
5319.25 765.97
749.00 501.83
645.00 483.75
714.00 656.88
2.12 26.73
2435.17 W
24.35
2459.52 X
345.56
2805.08 Y
420.76
3225.84 Z
32.26
3258.10
325.81
325.80
Rate Amount
5319.25 914.91
749.00 599.20
645.00 567.60
714.00 706.86
2.12 26.73
2815.30 W
28.15
2843.46 X
399.51
3242.96 Y
486.44
3729.41 Z
37.29
3766.70
376.67
376.65
Rate Amount
5319.25 1191.51
749.00 704.06
645.00 657.90
714.00 785.40
2.12 26.73
3365.61 W
33.66
3399.26 X
477.60
3876.86 Y
581.53
4458.39 Z
44.58
4502.97
450.30
450.30
Rate Amount
4382.15 315.51
749.00 381.99
645.00 483.75
714.00 656.88
2.12 28.39
2.12 24.80
1891.33 W
18.91
1910.24 X
268.39
2178.63 Y
326.79
2505.42 Z
25.05
2530.48
253.05
253.05
Rate Amount
4382.15 315.51
749.00 381.99
645.00 483.75
714.00 656.88
2.12 28.39
2.12 24.80
5000.00 100.00
145.72 2.91
749.00 202.23
645.00 174.15
2.12 17.09
370.00 3.70
2.12 4.41
2.12 1.10
714.00 49.98
645.00 45.15
2.12 5.83
2497.87 W
24.98
2522.85 X
354.46
2877.31 Y
431.60
3308.91 Z
33.09
3342.00
334.20
334.20
Rate Amount
5000.00 110.00
145.72 3.21
749.00 202.23
645.00 174.15
2.12 17.09
506.68 W
5.07
511.75 X
71.90
583.65 Y
87.55
671.20 Z
6.71
677.91
67.79
67.80
Rate Amount
4355.20 627.15
749.00 501.83
645.00 483.75
714.00 656.88
2.12 20.95
4382.15 525.86
749.00 456.89
645.00 445.05
714.00 606.90
2.12 20.95
900.00 90.00
714.00 7.14
290.00 26.10
2.12 7.72
749.00 374.50
645.00 322.50
714.00 71.40
2.12 20.95
784.00 196.00
645.00 161.25
5623.77 W
56.24
5680.01 X
798.04
6478.05 Y
971.71
7449.76 Z
74.50
7524.26
752.43
752.45
Rate Amount
4355.20 627.15
749.00 501.83
645.00 483.75
714.00 656.88
2.12 20.95
4382.15 525.86
749.00 456.89
645.00 445.05
714.00 606.90
2.12 20.95
900.00 90.00
714.00 7.14
290.00 26.10
2.12 7.72
749.00 374.50
645.00 322.50
714.00 71.40
2.12 20.95
2.12 9.37
5275.89 W
52.76
5328.65 X
748.68
6077.33 Y
911.60
6988.93 Z
69.89
7058.82
705.88
705.90
Rate Amount
35.00 51.80
2.12 15.16
66.96 W
0.67
67.63 X
9.50
77.13 Y
11.57
88.70 Z
0.89
89.59
60.53
60.55
Rate Amount
2.12 114.10
749.00 149.80
645.00 193.50
714.00 71.40
2.12 15.16
543.96 W
5.44
549.40 X
77.19
626.59 Y
93.99
720.58 Z
7.21
727.79
72.78
72.80
Rate Amount
749.00 149.80
645.00 129.00
2.12 15.16
293.96 W
2.94
296.90 X
41.71
338.61 Y
50.79
389.40 Z
3.89
393.29
39.33
39.35
Rate Amount
749.00 224.70
645.00 193.50
2.12 28.39
446.59 W
4.47
451.06 X
63.37
514.43 Y
77.16
591.59 Z
5.92
597.51
59.75
59.75
Rate Amount
749.00 2247.00
645.00 1290.00
645.00 645.00
714.00 178.50
2.12 28.39
4388.89 W
43.89
4432.78 X
622.81
5055.59 Y
758.34
5813.93 Z
58.14
5872.07
587.21
587.20
Rate Amount
749.00 3745.00
645.00 1935.00
645.00 1290.00
714.00 235.62
2.12 28.39
7234.01 W
72.34
7306.35 X
1026.54
8332.89 Y
1249.93
9582.82 Z
95.83
9678.65
967.87
967.85
Rate Amount
749.00 561.75
645.00 477.30
2.12 57.05
1096.10 W
10.96
1107.06 X
155.54
1262.60 Y
189.39
1451.99 Z
14.52
1466.51
146.65
146.65
Rate Amount
749.00 599.20
645.00 516.00
2.12 72.21
1187.41 W
11.87
1199.28 X
168.50
1367.78 Y
205.17
1572.95 Z
15.73
1588.68
158.87
158.85
Rate Amount
749.00 374.50
645.00 322.50
2.12 28.39
725.39 W
7.25
732.64 X
102.94
835.58 Y
125.34
960.92 Z
9.61
970.53
97.05
97.05
Rate Amount
5.00 115.00
2.12 8.27
784.00 713.44
645.00 586.95
2.12 178.04
1601.70 W
16.02
1617.72 X
227.29
1845.01 Y
276.75
2121.76 Z
21.22
2142.98
214.30
214.30
Rate Amount
749.00 374.50
645.00 322.50
2.12 3.86
700.86 W
7.01
707.87 X
99.46
807.33 Y
121.10
928.43 Z
9.28
937.71
93.77
93.75
Rate Amount
3713.20 51.98
749.00 202.23
645.00 174.15
714.00 35.70
2.12 3.03
467.09 W
4.67
471.76 X
66.28
538.04 Y
80.71
618.75 Z
6.19
624.94
6.25
6.25
Rate Amount
3713.20 51.98
749.00 224.70
645.00 193.50
714.00 35.70
2.12 4.41
510.29 W
5.10
515.39 X
72.41
587.80 Y
88.17
675.97 Z
6.76
682.73
6.83
6.85
Rate Amount
3713.20 51.98
749.00 262.15
645.00 225.75
714.00 35.70
2.12 5.79
581.37 W
5.81
587.18 X
82.50
669.68 Y
100.45
770.13 Z
7.70
777.83
7.78
7.80
Rate Amount
3713.20 51.98
749.00 486.85
645.00 419.25
714.00 35.70
2.12 3.31
997.09 W
9.97
1007.06 X
141.49
1148.55 Y
172.28
1320.83 Z
13.21
1334.04
13.34
13.35
Rate Amount
3713.20 74.26
749.00 239.68
645.00 206.40
714.00 42.84
2.12 4.41
567.59 W
5.68
573.27 X
80.54
653.81 Y
98.07
751.88 Z
7.52
759.40
7.59
7.60
Rate Amount
3713.20 74.26
749.00 269.64
645.00 232.20
714.00 42.84
2.12 5.79
624.73 W
6.25
630.98 X
88.65
719.63 Y
107.94
827.57 Z
8.28
835.85
8.36
8.35
Rate Amount
3713.20 74.26
749.00 314.58
645.00 270.90
714.00 42.84
2.12 9.37
711.95 W
7.12
719.07 X
101.03
820.10 Y
123.02
943.12 Z
9.43
952.55
9.53
9.55
Rate Amount
3713.20 89.12
749.00 644.14
645.00 554.70
714.00 35.70
2.12 5.79
1329.45 W
13.29
1342.74 X
188.65
1531.39 Y
229.71
1761.10 Z
17.61
1778.71
17.79
17.80
Rate Amount
3995.00 55.93
3713.20 37.13
749.00 644.14
645.00 554.70
714.00 35.70
2.12 5.79
1333.39 W
13.33
1346.72 X
189.21
1535.93 Y
230.39
1766.32 Z
17.66
1783.98
17.84
17.85
Rate Amount
4382.15 131.46
749.00 374.50
645.00 387.00
714.00 664.02
2.12 15.16
2.12 30.32
1602.46 W
16.02
1618.48 X
227.40
1845.88 Y
276.88
2122.76 Z
21.23
2143.99
214.40
214.40
Rate Amount
4382.15 201.58
749.00 801.43
645.00 844.95
714.00 714.00
2.12 15.16
2.12 34.17
2611.29 W
26.11
2637.40 X
370.55
3007.95 Y
451.19
3459.14 Z
34.59
3493.73
349.37
349.35
Rate Amount
4382.15 201.58
2.12 15.16
749.00 501.83
645.00 516.00
714.00 913.92
2.12 34.17
2182.66 W
21.83
2204.49 X
309.73
2514.22 Y
377.13
2891.35 Z
28.91
2920.26
292.03
292.05
Rate Amount
4382.15 100.79
2.12 15.16
749.00 689.08
645.00 883.65
714.00 664.02
2.12 34.17
2386.87 W
23.87
2410.74 X
338.71
2749.45 Y
412.42
3161.87 Z
31.62
3193.49
319.35
319.35
Rate Amount
4382.15 166.52
2.12 15.16
749.00 1498.00
645.00 1909.20
714.00 714.00
2.12 34.17
4337.05 W
43.37
4380.42 X
615.45
4995.87 Y
749.38
5745.25 Z
57.45
5802.70
580.27
580.25
Rate Amount
7790.25 296.03
2.12 15.16
749.00 1498.00
645.00 1909.20
714.00 714.00
2.12 34.17
4466.56 W
44.67
4511.23 X
633.83
5145.06 Y
771.76
5916.82 Z
59.17
5975.99
597.60
597.60
Rate Amount
5129.25 76.94
749.00 352.03
645.00 445.05
714.00 421.26
2.12 34.17
1329.45 W
13.29
1342.75 X
188.66
1531.40 Y
229.71
1761.11 Z
17.61
1778.73
177.87
177.85
Rate Amount
2.12 28.39
2.12 28.39
56.77 W
0.57
57.34 X
8.06
65.40 Y
9.81
75.21 Z
0.75
75.96
7.60
7.60
Rate Amount
600.00 18.00
2.12 1.93
714.00 142.80
645.00 64.50
2.12 9.37
2.12 5.79
242.39 W
2.42
244.81 X
34.40
279.21 Y
41.88
321.09 Z
3.21
324.30
32.43
32.45
Rate Amount
370.00 3.70
2.12 4.41
2.12 1.10
714.00 57.12
645.00 25.80
2.12 5.79
97.92 W
0.98
98.90 X
13.90
112.79 Y
16.92
129.71 Z
1.30
131.01
13.10
13.10
Rate Amount
600.00 18.00
2.12 17.09
2.12 1.93
714.00 214.20
645.00 64.50
2.12 9.37
2.12 5.79
330.87 W
3.31
334.18 X
46.95
381.14 Y
57.17
438.31 Z
4.38
442.69
44.27
44.25
Rate Amount
600.00 18.00
2.12 17.09
2.12 1.93
714.00 214.20
645.00 64.50
2.12 5.79
2.12 5.79
327.29 W
3.27
330.56 X
46.44
377.01 Y
56.55
433.56 Z
4.34
437.90
43.79
43.80
Rate Amount
50.00 35.00
2.12 15.16
2.12 17.09
40.00 60.00
2.12 9.37
2.12 24.80
714.00 714.00
645.00 322.50
2.12 17.09
1215.01 W
12.15
1227.16 X
172.42
1399.57 Y
209.94
1609.51 Z
16.10
1625.60
162.56
162.55
Rate Amount
40.00 60.00
2.12 9.37
2.12 24.53
714.00 285.60
645.00 296.70
2.12 17.09
693.29 W
6.93
700.22 X
98.38
798.60 Y
119.79
918.39 Z
9.18
927.57
92.76
92.75
Rate Amount
50.00 35.00
2.12 15.16
714.00 285.60
645.00 129.00
2.12 17.09
481.85 W
4.82
486.66 X
68.38
555.04 Y
83.26
638.30 Z
6.38
644.68
64.47
64.45
Rate Amount
38.00 145.92
2.12 3.31
714.00 328.44
645.00 148.35
714.00 71.40
2.12 15.16
2.12 17.09
729.66 W
7.30
736.96 X
103.54
840.50 Y
126.08
966.58 Z
9.67
976.24
97.62
97.60
Rate Amount
280.00 918.40
100.00 220.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 14.88
2.12 17.09
1831.28 W
18.31
1849.59 X
259.87
2109.46 Y
316.42
2425.88 Z
24.26
2450.13
245.01
245.00
Rate Amount
200.00 334.00
100.00 220.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 15.16
2.12 17.09
1247.15 W
12.47
1259.62 X
176.98
1436.60 Y
215.49
1652.09 Z
16.52
1668.61
166.86
166.85
Rate Amount
210.00 300.30
100.00 220.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 15.16
2.12 17.09
1213.45 W
12.13
1225.59 X
172.19
1397.78 Y
209.67
1607.45 Z
16.07
1623.52
162.35
162.35
Rate Amount
300.00 375.00
160.00 120.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 14.88
2.12 17.09
1187.88 W
11.88
1199.76 X
168.57
1368.32 Y
205.25
1573.57 Z
15.74
1589.31
158.93
158.95
Rate Amount
300.00 270.00
160.00 120.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 14.88
2.12 17.09
1082.88 W
10.83
1093.71 X
153.67
1247.37 Y
187.11
1434.48 Z
14.34
1448.82
144.88
144.90
Rate Amount
300.00 270.00
105.00 84.00
2.12 3.31
714.00 428.40
645.00 193.50
714.00 35.70
2.12 14.88
2.12 17.09
1046.88 W
10.47
1057.35 X
148.56
1205.90 Y
180.89
1386.79 Z
13.87
1400.66
140.07
140.05
Rate Amount
270.00 386.10
100.00 90.00
2.12 3.31
714.00 321.30
714.00 321.30
2.12 15.16
2.12 17.09
1154.25 W
11.54
1165.79 X
163.79
1329.59 Y
199.44
1529.03 Z
15.29
1544.32
154.43
154.45
Rate Amount
105.00 78.75
2.12 5.79
2.12 0.83
714.00 178.50
645.00 161.25
2.12 11.30
2.12 22.87
459.29 W
4.59
463.88 X
65.18
529.06 Y
79.36
608.42 Z
6.08
614.50
61.45
61.45
Rate Amount
120.00 90.00
2.12 5.79
2.12 0.83
714.00 178.50
645.00 161.25
2.12 11.30
2.12 22.87
470.54 W
4.71
475.24 X
66.77
542.02 Y
81.30
623.32 Z
6.23
629.55
62.96
62.95
Rate Amount
120.00 64.80
2.12 1.10
714.00 171.36
645.00 154.80
2.12 22.87
414.94 W
4.15
419.09 X
58.88
477.97 Y
71.70
549.66 Z
5.50
555.16
55.52
55.50
Rate Amount
120.00 43.20
2.12 0.83
714.00 85.68
645.00 77.40
2.12 15.16
222.26 W
2.22
224.49 X
31.54
256.03 Y
38.40
294.43 Z
2.94
297.38
29.74
29.75
Rate Amount
120.00 216.00
2.12 1.10
2.12 5.79
714.00 192.78
645.00 174.15
2.12 11.30
2.12 22.87
623.99 W
6.24
630.23 X
88.55
718.78 Y
107.82
826.60 Z
8.27
834.87
83.49
83.50
Rate Amount
120.00 345.60
2.12 1.10
2.12 5.79
714.00 307.02
645.00 277.35
2.12 18.08
2.12 36.59
991.53 W
9.92
1001.45 X
140.70
1142.15 Y
171.32
1313.48 Z
13.13
1326.61
132.66
132.65
Rate Amount
120.00 90.00
2.12 5.79
2.12 0.83
714.00 178.50
645.00 161.25
2.12 11.58
2.12 22.60
215.00 268.75
2.12 3.03
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
1507.60 W
15.08
1522.67 X
213.94
1736.61 Y
260.49
1997.10 Z
19.97
2017.07
201.71
201.70
Rate Amount
50.00 42.00
2.12 28.66
2.12 1.10
714.00 178.50
645.00 161.25
2.12 5.79
2.12 17.09
215.00 260.15
2.12 14.33
2.12 3.03
714.00 385.56
645.00 348.30
2.12 22.87
2.12 14.33
1482.96 W
14.83
1497.79 X
210.44
1708.23 Y
256.23
1964.46 Z
19.64
1984.10
198.41
198.40
Rate Amount
120.00 43.20
2.12 0.83
714.00 85.68
645.00 77.40
2.12 15.16
165.00 132.00
2.12 3.03
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
1122.58 W
11.23
1133.81 X
159.30
1293.11 Y
193.97
1487.08 Z
14.87
1501.95
150.20
150.20
Rate Amount
300.00 11.40
2.12 3.86
2.12 1.93
714.00 428.40
645.00 387.00
2.12 76.07
2.12 76.07
984.73 W
9.85
994.58 X
139.74
1134.32 Y
170.15
1304.47 Z
13.04
1317.51
52.70
52.70
Rate Amount
35.00 0.46
300.00 3.90
210.00 2.73
22.00 0.29
2.12 3.86
2.12 1.93
714.00 428.40
645.00 387.00
2.12 76.07
2.12 76.07
980.71 W
9.81
990.52 X
139.17
1129.69 Y
169.45
1299.14 Z
12.99
1312.13
52.49
52.50
Rate Amount
120.00 64.80
2.12 1.10
714.00 171.36
645.00 154.80
2.12 22.87
100.00 95.00
2.12 3.03
714.00 385.56
645.00 348.30
2.12 11.30
2.12 17.09
2.12 11.30
2.12 129.53
1416.05 W
14.16
1430.21 X
200.94
1631.15 Y
244.67
1875.82 Z
18.76
1894.58
63.15
63.15
Rate Amount
120.00 96.00
714.00 257.04
645.00 232.20
2.12 33.90
2.12 1.93
100.00 141.00
2.12 4.41
714.00 571.20
645.00 516.00
2.12 17.09
2.12 25.36
2.12 15.16
2.12 199.53
2110.81 W
21.11
2131.92 X
299.53
2431.46 Y
364.72
2796.17 Z
27.96
2824.14
94.14
94.15
Rate Amount
120.00 64.80
2.12 1.10
714.00 171.36
645.00 154.80
2.12 22.87
175.00 203.00
2.12 3.03
2.12 11.30
714.00 385.56
645.00 348.30
2.12 14.33
2.12 25.36
2.12 140.83
1546.65 W
15.47
1562.11 X
219.48
1781.59 Y
267.24
2048.83 Z
20.49
2069.32
68.98
69.00
Rate Amount
120.00 96.00
2.12 1.38
714.00 257.04
645.00 232.20
2.12 33.90
175.00 301.00
2.12 4.41
2.12 16.81
714.00 571.20
645.00 516.00
2.12 21.22
2.12 37.76
2.12 214.97
2303.88 W
23.04
2326.92 X
326.93
2653.86 Y
398.08
3051.93 Z
30.52
3082.45
102.75
102.75
Rate Amount
130.00 130.00
2.12 1.10
714.00 107.10
645.00 96.75
2.12 8.82
2.12 8.27
352.04 W
3.52
355.56 X
49.96
405.52 Y
60.83
466.34 Z
4.66
471.01
47.10
47.10
Rate Amount
240.00 1368.00
2.12 3.03
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
2136.31 W
21.36
2157.67 X
303.15
2460.83 Y
369.12
2829.95 Z
28.30
2858.25
285.82
285.80
Rate Amount
2.12 3.03
30.00 84.00
2.12 3.03
50.00 25.00
645.00 277.35
2.12 11.30
2.12 11.30
415.01 W
4.15
419.16 X
58.89
478.05 Y
71.71
549.76 Z
5.50
555.26
55.53
55.55
Rate Amount
200.00 242.00
2.12 14.33
2.12 3.03
0.00
714.00 385.56
645.00 348.30
2.12 22.87
2.12 14.33
1030.43 W
10.30
1040.73 X
146.22
1186.96 Y
178.04
1365.00 Z
13.65
1378.65
137.86
137.85
Rate Amount
175.00 203.00
2.12 11.30
2.12 3.03
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
982.61 W
9.83
992.44 X
139.44
1131.87 Y
169.78
1301.65 Z
13.02
1314.67
131.47
131.45
Rate Amount
105.00 78.75
2.12 5.79
2.12 0.83
714.00 178.50
645.00 161.25
2.12 11.30
2.12 22.87
175.00 203.00
2.12 3.03
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
1430.60 W
14.31
1444.90 X
203.01
1647.91 Y
247.19
1895.10 Z
18.95
1914.05
191.41
191.40
Rate Amount
150.00 120.00
2.12 3.03
2.12 11.30
714.00 385.56
645.00 348.30
2.12 14.33
2.12 25.36
907.88 W
9.08
916.96 X
128.83
1045.79 Y
156.87
1202.66 Z
12.03
1214.68
121.47
121.45
Rate Amount
225.00 261.00
2.12 3.03
2.12 11.30
714.00 385.56
645.00 348.30
2.12 14.33
2.12 17.09
1040.61 W
10.41
1051.02 X
147.67
1198.68 Y
179.80
1378.49 Z
13.78
1392.27
139.23
139.25
Rate Amount
100.00 95.00
2.12 3.03
714.00 385.56
645.00 348.30
2.12 11.30
2.12 17.09
860.28 W
8.60
868.88 X
122.08
990.96 Y
148.64
1139.60 Z
11.40
1151.00
115.10
115.10
Rate Amount
100.00 70.00
75.00 5.25
115.00 133.40
2.12 3.03
2.12 11.30
714.00 642.60
645.00 580.50
2.12 14.33
2.12 15.16
1475.57 W
14.76
1490.33 X
209.39
1699.72 Y
254.96
1954.67 Z
19.55
1974.22
197.42
197.40
Rate Amount
100.00 70.00
75.00 5.25
115.00 144.90
2.12 3.03
2.12 5.79
714.00 642.60
645.00 580.50
2.12 14.33
2.12 15.16
1481.56 W
14.82
1496.37 X
210.24
1706.61 Y
255.99
1962.61 Z
19.63
1982.23
198.22
198.20
Rate Amount
48.00 78.24
2.12 15.16
300.00 72.00
2.12 5.79
2.12 34.17
2.12 28.39
2.12 3.03
714.00 2499.00
2.12 17.09
2752.87 W
27.53
2780.39 X
390.65
3171.04 Y
475.66
3646.70 Z
36.47
3683.16
368.32
368.30
Rate Amount
230.00 115.00
2.12 0.83
714.00 571.20
645.00 516.00
2.12 8.82
2.12 15.16
1227.00 W
12.27
1239.27 X
174.12
1413.39 Y
212.01
1625.40 Z
16.25
1641.65
164.17
164.15
Rate Amount
230.00 23.00
714.00 285.60
645.00 258.00
2.12 11.30
2.12 17.09
594.99 W
5.95
600.94 X
84.43
685.37 Y
102.81
788.17 Z
7.88
796.06
79.61
79.60
Rate Amount
90.00 50.40
2.12 1.93
714.00 4284.00
645.00 1290.00
2.12 28.39
2.12 17.09
5671.80 W
56.72
5728.52 X
804.86
6533.38 Y
980.01
7513.39 Z
75.13
7588.52
5.06
5.05
Rate Amount
4355.20 627.15
749.00 501.83
645.00 483.75
714.00 656.88
2.12 19.02
5000.00 100.00
145.72 2.91
645.00 161.25
1200.00 168.00
163.93 22.95
1500.00 60.00
163.93 6.56
5000.00 500.00
145.72 14.57
645.00 64.50
714.00 35.70
2.12 9.09
2.12 4.41
784.00 1372.00
645.00 1128.75
714.00 214.20
2.12 51.81
784.00 784.00
645.00 322.50
2.12 53.47
7365.30 W
73.65
7438.96 X
1045.17
8484.13 Y
1272.62
9756.75 Z
97.57
9854.32
985.43
985.45
Rate Amount
260.00 38.48
2.12 0.83
714.00 107.10
645.00 96.75
2.12 6.06
784.00 548.80
645.00 451.50
2.12 152.13
1401.65 W
14.02
1415.67 X
198.90
1614.57 Y
242.19
1856.75 Z
18.57
1875.32
62.51
62.50
Rate Amount
260.00 51.48
2.12 1.10
714.00 107.10
645.00 96.75
2.12 6.06
784.00 548.80
645.00 451.50
2.12 152.13
1414.93 W
14.15
1429.08 X
200.79
1629.86 Y
244.48
1874.34 Z
18.74
1893.08
63.10
63.10
Rate Amount
2.12 456.39
784.00 235.20
645.00 193.50
714.00 107.10
2.12 60.63
1052.83 W
10.53
1063.35 X
149.40
1212.76 Y
181.91
1394.67 Z
13.95
1408.62
140.86
140.85
Rate Amount
784.00 392.00
645.00 322.50
2.12 114.10
828.60 W
8.29
836.88 X
117.58
954.47 Y
143.17
1097.64 Z
10.98
1108.61
110.86
110.85
Rate Amount
190.00 1322.40
2.12 82.64
714.00 328.44
645.00 96.75
2.12 6.06
2.12 152.13
1988.42 W
19.88
2008.31 X
282.17
2290.47 Y
343.57
2634.04 Z
26.34
2660.38
88.68
88.70
Rate Amount
11200.00 1120.00
5000.00 -500.00
620.00 W
6.20
626.20 X
87.98
714.18 Y
107.13
821.31 Z
8.21
829.52
82.95
82.95
Rate Amount
6.00 1016.82
749.00 898.80
645.00 774.00
2.12 26.73
2716.35 W
27.16
2743.51 X
385.46
3128.97 Y
469.35
3598.32 Z
35.98
3634.30
363.43
363.45
Rate Amount
410.00 51.25
51.25 W
0.51
51.76 X
7.27
59.03 Y
8.85
67.88 Z
0.68
68.56
68.56
68.55
Rate Amount
13.00 189.54
2.12 8.27
784.00 352.80
645.00 290.25
2.12 84.80
925.66 W
9.26
934.92 X
131.36
1066.28 Y
159.94
1226.22 Z
12.26
1238.48
123.85
123.85
Rate Amount
40.00 24.80
2.12 1.10
2.12 22.87
714.00 235.62
645.00 109.65
2.12 15.16
409.20 W
4.09
413.29 X
58.07
471.36 Y
70.70
542.06 Z
5.42
547.48
54.75
54.75
Rate Amount
40.00 39.60
2.12 24.53
2.12 9.37
714.00 285.60
645.00 296.70
2.12 17.09
672.89 W
6.73
679.62 X
95.49
775.11 Y
116.27
891.38 Z
8.91
900.29
90.03
90.05
Rate Amount
94.00 49.82
2.12 1.10
2.12 11.30
714.00 257.04
645.00 232.20
2.12 17.09
2.12 14.33
582.88 W
5.83
588.71 X
82.71
671.42 Y
100.71
772.14 Z
7.72
779.86
77.99
78.00
Rate Amount
94.00 78.96
2.12 3.03
2.12 14.33
714.00 385.56
645.00 348.30
2.12 22.87
2.12 14.33
867.39 W
8.67
876.06 X
123.09
999.15 Y
149.87
1149.02 Z
11.49
1160.51
116.05
116.05
Rate Amount
200.00 76.00
2.12 1.10
2.12 1.93
714.00 257.04
645.00 232.20
2.12 17.09
2.12 14.33
599.69 W
6.00
605.69 X
85.10
690.79 Y
103.62
794.40 Z
7.94
802.35
80.23
80.25
Rate Amount
200.00 120.00
2.12 3.03
2.12 14.33
714.00 385.56
645.00 348.30
2.12 22.87
2.12 14.33
908.43 W
9.08
917.51 X
128.91
1046.42 Y
156.96
1203.39 Z
12.03
1215.42
121.54
121.55
Rate Amount
105.00 78.75
2.12 5.79
2.12 0.83
714.00 178.50
645.00 161.25
2.12 11.30
2.12 22.87
459.29 W
4.59
463.88 X
65.18
529.06 Y
79.36
608.42 Z
6.08
614.50
61.45
61.45
Rate Amount
50.00 35.00
2.12 17.09
714.00 285.60
645.00 129.00
2.12 15.16
481.85 W
4.82
486.66 X
68.38
555.04 Y
83.26
638.30 Z
6.38
644.68
64.47
64.45
Rate Amount
15.00 690.00
2.12 16.54
749.00 381.99
645.00 483.75
2.12 28.39
2.12 24.80
1625.47 W
16.25
1641.72 X
230.66
1872.38 Y
280.86
2153.24 Z
21.53
2174.77
217.48
217.50
Rate Amount
600.00 12.00
2.12 1.10
714.00 78.54
645.00 38.70
2.12 5.79
2.12 5.79
141.92 W
1.42
143.34 X
20.14
163.48 Y
24.52
188.00 Z
1.88
189.88
18.99
19.00
Rate Amount
600.00 6.00
2.12 1.10
714.00 49.98
645.00 19.35
2.12 4.41
2.12 5.79
86.63 W
0.87
87.50 X
12.29
99.79 Y
14.97
114.76 Z
1.15
115.91
11.59
11.60
Rate Amount
645.00 58.05
645.00 25.80
714.00 28.56
2.12 5.79
2.12 3.86
122.06 W
1.22
123.28 X
17.32
140.60 Y
21.09
161.69 Z
1.62
163.30
16.33
16.35
Rate Amount
40.00 40.00
2.12 1.10
2.12 22.87
714.00 235.62
645.00 109.65
2.12 15.16
424.41 W
4.24
428.65 X
60.23
488.87 Y
73.33
562.21 Z
5.62
567.83
56.78
56.80
Rate Amount
645.00 70.95
645.00 32.25
714.00 35.70
2.12 13.23
2.12 3.86
155.99 W
1.56
157.55 X
22.14
179.68 Y
26.95
206.63 Z
2.07
208.70
20.87
20.85
Rate Amount
120.00 55.20
2.12 1.10
714.00 257.04
645.00 232.20
2.12 14.33
2.12 17.09
576.96 W
5.77
582.73 X
81.87
664.60 Y
99.69
764.29 Z
7.64
771.94
77.19
77.20
Rate Amount
120.00 49.20
2.12 0.83
714.00 128.52
645.00 116.10
2.12 17.36
100.00 73.00
2.12 2.20
714.00 292.74
645.00 264.45
2.12 8.82
2.12 13.23
2.12 9.37
2.12 85.44
1061.26 W
10.61
1071.87 X
150.60
1222.47 Y
183.37
1405.84 Z
14.06
1419.90
47.33
47.35
Rate Amount
100.00 43.00
2.12 0.83
714.00 192.78
645.00 174.15
2.12 8.82
2.12 13.23
2.12 9.37
2.12 57.05
499.22 W
4.99
504.22 X
70.84
575.06 Y
86.26
661.32 Z
6.61
667.93
22.26
22.25
Rate Amount
100.00 57.00
2.12 1.10
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
2.12 11.30
2.12 72.21
659.24 W
6.59
665.83 X
93.55
759.38 Y
113.91
873.28 Z
8.73
882.02
29.40
29.40
Rate Amount
100.00 85.00
2.12 1.38
714.00 378.42
645.00 341.85
2.12 17.09
2.12 25.36
2.12 15.14
2.12 85.44
949.66 W
9.50
959.16 X
134.76
1093.92 Y
164.09
1258.01 Z
12.58
1270.59
42.35
42.35
Rate Amount
120.00 49.20
2.12 0.83
714.00 128.52
645.00 116.10
2.12 17.36
150.00 91.50
2.12 2.20
2.12 8.82
714.00 292.74
645.00 264.45
2.12 11.02
2.12 19.29
2.12 95.08
1097.12 W
10.97
1108.09 X
155.69
1263.78 Y
189.57
1453.35 Z
14.53
1467.88
48.93
48.95
Rate Amount
120.00 64.80
2.12 1.10
714.00 171.36
645.00 154.80
2.12 22.87
150.00 174.00
2.12 3.03
2.12 11.30
714.00 385.56
645.00 348.30
2.12 14.33
2.12 25.36
2.12 140.83
1517.65 W
15.18
1532.82 X
215.36
1748.18 Y
262.23
2010.41 Z
20.10
2030.52
67.68
67.70
Rate Amount
120.00 96.00
2.12 1.38
714.00 257.04
645.00 232.20
2.12 33.90
150.00 258.00
2.12 4.41
2.12 16.81
714.00 571.20
645.00 516.00
2.12 21.22
2.12 37.76
2.12 214.97
2260.88 W
22.61
2283.49 X
320.83
2604.32 Y
390.65
2994.97 Z
29.95
3024.92
100.83
100.85
Rate Amount
150.00 52.50
2.12 0.83
2.12 4.41
714.00 199.92
645.00 180.60
2.12 8.82
2.12 13.23
2.12 9.37
2.12 57.05
526.72 W
5.27
531.99 X
74.74
606.74 Y
91.01
697.75 Z
6.98
704.72
23.49
23.50
Rate Amount
150.00 69.00
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
2.12 11.30
2.12 72.21
677.02 W
6.77
683.79 X
96.07
779.87 Y
116.98
896.85 Z
8.97
905.82
30.19
30.20
Rate Amount
150.00 102.00
2.12 1.38
2.12 8.27
714.00 378.42
645.00 341.85
2.12 16.81
2.12 25.36
2.12 15.16
2.12 85.44
974.68 W
9.75
984.42 X
138.31
1122.74 Y
168.41
1291.15 Z
12.91
1304.06
43.47
43.45
Rate Amount
130.00 105.30
2.12 1.10
714.00 78.54
645.00 70.95
2.12 5.79
2.12 5.79
267.47 W
2.67
270.14 X
37.95
308.10 Y
46.21
354.31 Z
3.54
357.85
35.79
35.80
Rate Amount
200.00 146.00
2.12 1.10
2.12 11.30
714.00 257.04
645.00 232.20
2.12 17.09
2.12 14.33
679.06 W
6.79
685.85 X
96.36
782.21 Y
117.33
899.55 Z
9.00
908.54
90.85
90.85
Rate Amount
175.00 122.50
2.12 1.10
714.00 257.04
645.00 232.20
2.12 5.79
2.12 11.30
2.12 17.09
647.02 W
6.47
653.49 X
91.81
745.30 Y
111.80
857.10 Z
8.57
865.67
86.57
86.55
Rate Amount
150.00 69.00
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
593.52 W
5.94
599.45 X
84.22
683.67 Y
102.55
786.23 Z
7.86
794.09
79.41
79.40
Rate Amount
225.00 157.50
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
682.02 W
6.82
688.84 X
96.78
785.62 Y
117.84
903.46 Z
9.03
912.50
91.25
91.25
Rate Amount
100.00 57.00
2.12 1.10
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
575.73 W
5.76
581.49 X
81.70
663.19 Y
99.48
762.66 Z
7.63
770.29
77.03
77.05
Rate Amount
48.00 47.04
300.00 39.00
2.12 1.93
2.12 22.87
2.12 1.10
714.00 1256.64
2.12 17.09
1385.67 W
13.86
1399.53 X
196.63
1596.16 Y
239.42
1835.59 Z
18.36
1853.94
185.39
185.40
Rate Amount
230.00 57.50
2.12 0.83
714.00 285.60
645.00 258.00
2.12 8.82
2.12 9.37
620.12 W
6.20
626.32 X
88.00
714.32 Y
107.15
821.46 Z
8.21
829.68
82.97
82.95
Rate Amount
90.00 33.30
2.12 1.10
714.00 2856.00
645.00 645.00
2.12 15.16
2.12 17.09
3567.65 W
35.68
3603.32 X
506.27
4109.59 Y
616.44
4726.03 Z
47.26
4773.29
3.18
3.20
Rate Amount
90.00 63.00
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 11.30
2.12 17.09
587.52 W
5.88
593.39 X
83.37
676.76 Y
101.51
778.28 Z
7.78
786.06
78.61
78.60
Rate Amount
40.00 40.00
2.12 17.09
57.09 W
0.57
57.66 X
8.10
65.76 Y
9.86
75.62 Z
0.76
76.38
76.40
Rate Amount
40.00 40.00
2.12 17.09
57.09 W
0.57
57.66 X
8.10
65.76 Y
9.86
75.62 Z
0.76
76.38
76.40
Rate Amount
40.00 40.00
2.12 1.10
2.12 22.81
714.00 157.08
645.00 141.90
2.12 15.16
378.05 W
3.78
381.83 X
53.65
435.48 Y
65.32
500.80 Z
5.01
505.81
50.58
50.60
Rate Amount
38.00 83.60
90.00 72.00
2.12 3.31
714.00 328.44
645.00 148.35
714.00 35.70
2.12 15.16
2.12 17.09
703.64 W
7.04
710.68 X
99.85
810.53 Y
121.58
932.11 Z
9.32
941.43
94.14
94.15
Rate Amount
38.00 83.60
2.12 2.33
714.00 249.90
645.00 77.40
714.00 35.70
2.12 6.68
2.12 17.09
472.70 W
4.73
477.42 X
67.08
544.50 Y
81.68
626.18 Z
6.26
632.44
63.24
63.25
Rate Amount
280.00 918.40
2.12 3.31
714.00 328.44
645.00 148.35
2.12 15.16
2.12 17.09
1430.74 W
14.31
1445.05 X
203.03
1648.08 Y
247.21
1895.29 Z
18.95
1914.24
191.42
191.40
Rate Amount
280.00 509.60
2.12 1.10
714.00 235.62
645.00 109.65
2.12 15.16
2.12 17.09
888.22 W
8.88
897.10 X
126.04
1023.14 Y
153.47
1176.61 Z
11.77
1188.38
118.84
118.85
Rate Amount
200.00 334.00
2.12 1.93
714.00 328.44
645.00 148.35
2.12 10.20
2.12 11.30
834.22 W
8.34
842.56 X
118.38
960.94 Y
144.14
1105.08 Z
11.05
1116.13
111.61
111.60
Rate Amount
200.00 180.00
2.12 1.10
714.00 235.62
645.00 109.65
2.12 15.16
2.12 17.09
558.62 W
5.59
564.20 X
79.27
643.47 Y
96.52
740.00 Z
7.40
747.40
74.74
74.75
Rate Amount
210.00 300.30
2.12 2.20
714.00 328.44
645.00 148.35
2.12 15.16
2.12 17.09
811.54 W
8.12
819.66 X
115.16
934.82 Y
140.22
1075.04 Z
10.75
1085.79
108.58
108.60
Rate Amount
210.00 174.30
2.12 1.93
714.00 235.62
645.00 109.65
2.12 15.16
2.12 17.09
553.74 W
5.54
559.28 X
78.58
637.86 Y
95.68
733.54 Z
7.34
740.88
74.09
74.10
Rate Amount
115.00 80.50
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 11.30
2.12 5.79
593.72 W
5.94
599.65 X
84.25
683.91 Y
102.59
786.49 Z
7.86
794.36
79.44
79.45
Rate Amount
115.00 86.25
2.12 1.10
2.12 5.79
714.00 257.04
645.00 232.20
2.12 5.79
2.12 8.82
596.99 W
5.97
602.96 X
84.72
687.67 Y
103.15
790.82 Z
7.91
798.73
79.87
79.85
Rate Amount
300.00 195.00
250.00 195.00
2.12 9.37
714.00 249.90
645.00 225.75
2.12 9.37
884.39 W
8.84
893.23 X
125.50
1018.73 Y
152.81
1171.54 Z
11.72
1183.26
118.33
118.35
Rate Amount
100.00 70.00
2.12 5.79
2.12 3.86
2.12 51.26
714.00 257.04
645.00 232.20
620.15 W
6.20
626.35 X
88.00
714.35 Y
107.15
821.50 Z
8.22
829.72
82.97
82.95
Rate Amount
300.00 468.00
190.00 532.00
120.00 342.00
60.00 360.00
22.00 352.00
120.00 180.00
25.00 50.00
784.00 1301.44
714.00 2320.50
645.00 1290.00
250.00 312.50
2.12 636.00
250.00 500.00
8644.44 W
86.44
8730.88 X
1226.69
9957.57 Y
1493.64
11451.21 Z
114.51
11565.72
1156.57
1156.55
Rate Amount
3713.20 679.52
749.00 906.29
645.00 832.05
645.00 348.30
714.00 656.88
2.12 32.25
3455.28 W
34.55
3489.83 X
490.32
3980.16 Y
597.02
4577.18 Z
45.77
4622.95
462.30
462.30
Rate Amount
4355.20 797.00
749.00 906.29
645.00 832.05
645.00 348.30
714.00 656.88
2.12 32.25
3572.77 W
35.73
3608.49 X
506.99
4115.49 Y
617.32
4732.81 Z
47.33
4780.14
478.01
478.00
Rate Amount
1400.00 29.40
1350.00 9.72
163.93 4.62
1500.00 21.15
163.93 2.31
5000.00 33.00
145.72 0.96
645.00 17.42
645.00 12.58
784.00 6.59
784.00 1.41
714.00 1.29
714.00 0.86
2.12 3.03
2.12 1.65
2.12 0.83
3044.30 30.44
2.12 51.26
2.12 28.66
2.12 3.86
749.00 374.50
645.00 483.75
2.12 5.79
1125.07 W
11.25
1136.32 X
159.65
1295.98 Y
194.40
1490.37 Z
14.90
1505.28
1505.30
Rate Amount
1400.00 19.60
1350.00 6.48
163.93 3.08
1500.00 14.10
163.93 1.54
5000.00 22.00
145.72 0.64
645.00 11.61
645.00 8.39
784.00 4.39
784.00 0.94
714.00 0.86
714.00 0.57
2.12 1.93
2.12 1.10
2.12 0.55
3044.30 18.27
2.12 20.95
2.12 1.93
749.00 247.17
645.00 322.50
708.59 W
7.09
715.68 X
100.55
816.23 Y
122.43
938.66 Z
9.39
948.05
948.05
Rate Amount
1400.00 9.80
1350.00 3.24
163.93 1.54
1500.00 7.05
163.93 0.77
5000.00 11.00
145.72 0.32
645.00 5.81
645.00 4.19
784.00 2.20
784.00 0.47
714.00 0.43
714.00 0.29
2.12 1.10
2.12 0.55
2.12 0.28
3044.30 9.13
2.12 17.09
2.12 1.93
749.00 127.33
645.00 322.50
2.12 5.79
532.80 W
5.33
538.12 X
75.61
613.73 Y
92.06
705.79 Z
7.06
712.85
712.85
Rate Amount
645.00 17.42
645.00 12.58
784.00 6.59
714.00 0.86
2.12 3.86
12.50 75.00
2.12 25.91
142.20 W
1.42
143.62 X
20.18
163.80 Y
24.57
188.37 Z
1.88
190.25
190.25
Rate Amount
3044.30 30.44
2.12 52.09
714.00 357.00
645.00 774.00
645.00 258.00
2.12 7.42
1478.95 W
14.79
1493.74 X
209.87
1703.61 Y
255.54
1959.15 Z
19.59
1978.74
1046.95
1046.95
Rate Amount
309.00 339.90
2.12 3.86
28.00 19.04
2.12 11.30
2.12 14.33
714.00 164.22
645.00 148.35
2.12 3.03
704.03 W
7.04
711.07 X
99.91
810.98 Y
121.65
932.63 Z
9.33
941.96
941.96
941.95
Rate Amount
515.00 566.50
2.12 3.86
28.00 19.04
2.12 11.30
2.12 14.33
714.00 164.22
645.00 148.35
2.12 3.03
930.63 W
9.31
939.94 X
132.06
1072.00 Y
160.80
1232.80 Z
12.33
1245.13
1245.13
1245.15
Rate Amount
309.00 339.90
776.00 19.40
500.00 12.50
300.00 7.50
2.12 9.37
2.12 5.79
714.00 142.80
714.00 178.50
645.00 290.25
2.12 3.86
1009.87 W
10.10
1019.97 X
143.31
1163.28 Y
174.49
1337.77 Z
13.38
1351.15
1351.15
1351.15
Rate Amount
515.00 566.50
776.00 19.40
500.00 12.50
300.00 7.50
2.12 9.37
2.12 5.79
714.00 142.80
714.00 178.50
645.00 290.25
2.12 3.86
1236.47 W
12.36
1248.83 X
175.46
1424.29 Y
213.64
1637.93 Z
16.38
1654.31
1654.31
1654.30
Rate Amount
309.00 339.90
2.12 5.79
2.12 20.95
2.12 11.30
714.00 214.20
645.00 193.50
2.12 3.03
788.67 W
7.89
796.56 X
111.92
908.48 Y
136.27
1044.75 Z
10.45
1055.20
1055.20
1055.20
Rate Amount
515.00 566.50
2.12 5.79
2.12 20.95
2.12 11.30
714.00 214.20
645.00 193.50
2.12 3.03
1015.26 W
10.15
1025.42 X
144.07
1169.49 Y
175.42
1344.91 Z
13.45
1358.36
1358.35
Rate Amount
791.00 90.97
2.12 57.05
714.00 178.50
645.00 161.25
2.12 5.79
493.55 W
4.94
498.49 X
70.04
568.52 Y
85.28
653.80 Z
6.54
660.34
66.03
66.05
Rate Amount
357.00 41.06
2.12 57.05
714.00 178.50
645.00 161.25
2.12 5.79
443.64 W
4.44
448.08 X
62.95
511.03 Y
76.65
587.69 Z
5.88
593.57
59.36
59.35
Rate Amount
28.00 19.04
2.12 15.16
2.12 5.79
714.00 214.20
645.00 193.50
2.12 3.03
450.72 W
4.51
455.22 X
63.96
519.18 Y
77.88
597.06 Z
5.97
603.03
46.39
46.40
Rate Amount
28.00 19.04
2.12 5.79
2.12 15.16
714.00 214.20
645.00 193.50
2.12 3.03
450.72 W
4.51
455.22 X
63.96
519.18 Y
77.88
597.06 Z
5.97
603.03
603.03
603.05
Rate Amount
714.00 214.20
645.00 193.50
2.12 3.03
2.12 8.27
419.00 W
4.19
423.19 X
59.46
482.65 Y
72.40
555.04 Z
5.55
560.60
560.60
Rate Amount
4750.00 30.02
2.12 28.66
2.12 15.16
784.00 23.52
714.00 85.68
645.00 161.25
2.12 5.79
350.08 W
3.50
353.58 X
49.68
403.26 Y
60.49
463.75 Z
4.64
468.38
468.40
Rate Amount
749.00 404.46
645.00 348.30
749.00 202.23
823.15 197.56
500.00 42.00
823.15 98.78
645.00 161.25
4382.15 267.31
749.00 898.80
645.00 967.50
714.00 714.00
2.12 11.30
2.12 5.79
4319.27 W
43.19
4362.47 X
612.93
4975.39 Y
746.31
5721.70 Z
57.22
5778.92
577.89
577.90
Rate Amount
645.00 570.83
645.00 241.88
2.12 8.54
2.12 85.71
260.00 2860.00
145.72 205.47
4355.20 45.73
4382.15 32.87
749.00 1265.81
714.00 1449.42
645.00 1090.05
714.00 242.76
2.12 34.17
163.93 81.97
8215.20 W
82.15
8297.35 X
1165.78
9463.12 Y
1419.47
10882.59 Z
108.83
10991.42
1099.14
1099.15
Rate Amount
600.00 18360.00
187.35 57.33
714.00 357.00
645.00 1290.00
2.12 11.30
2.12 171.15
130.00 158.60
714.00 130.66
645.00 118.04
2.12 1.65
2.12 10.75
2.12 10.20
20676.67 W
206.77
20883.44 X
2934.12
23817.56 Y
3572.63
27390.19 Z
273.90
27664.09
92213.63
92213.65
Rate Amount
600.00 187.50
187.35 0.59
714.00 178.50
645.00 161.25
749.00 97.37
714.00 357.00
645.00 212.85
600.00 18360.00
187.35 57.33
714.00 714.00
714.00 357.00
645.00 645.00
130.00 59.15
714.00 49.98
645.00 45.15
2.12 0.28
2.12 3.86
2.12 3.86
2.12 43.82
2.12 57.05
40.00 100.00
21691.54 W
216.92
21908.46 X
3078.14
24986.60 Y
3747.99
28734.59 Z
287.35
29021.94
96739.80
96739.80
Rate Amount
357.00 111.56
187.35 0.59
714.00 178.50
645.00 161.25
749.00 97.37
714.00 357.00
645.00 212.85
357.00 10924.20
187.35 57.33
714.00 714.00
714.00 357.00
645.00 645.00
130.00 59.15
714.00 49.98
645.00 45.15
2.12 0.28
2.12 3.86
2.12 3.86
2.12 43.82
2.12 57.05
40.00 100.00
14179.80 W
141.80
14321.60 X
2012.18
16333.78 Y
2450.07
18783.85 Z
187.84
18971.69
63238.97
63238.95
Rate Amount
600.00 225.00
187.35 0.70
714.00 178.50
645.00 161.25
749.00 187.25
714.00 449.82
645.00 322.50
600.00 22980.00
187.35 71.76
714.00 714.00
714.00 714.00
645.00 1290.00
130.00 73.45
714.00 57.12
645.00 51.60
2.12 0.55
2.12 4.96
2.12 4.69
2.12 43.82
2.12 70.28
40.00 150.00
27751.25 W
277.51
28028.76 X
3938.04
31966.80 Y
4795.02
36761.82 Z
367.62
37129.44
99011.84
99011.85
Rate Amount
357.00 133.88
187.35 0.70
714.00 178.50
645.00 161.25
749.00 187.25
714.00 449.82
645.00 322.50
357.00 13673.10
187.35 71.76
714.00 714.00
714.00 714.00
645.00 1290.00
130.00 73.45
714.00 57.12
645.00 51.60
2.12 0.55
2.12 4.96
2.12 4.69
2.12 43.82
2.12 70.28
40.00 150.00
18353.23 W
183.53
18536.76 X
2604.41
21141.17 Y
3171.18
24312.35 Z
243.12
24555.47
65481.25
65481.25
Rate Amount
645.00 341.85
645.00 51.60
714.00 49.98
2.12 3.03
446.46 W
4.46
450.92 X
63.35
514.27 Y
77.14
591.41 Z
5.91
597.32
59.73
59.75
Rate Amount
4382.15 65.73
35.00 5.36
645.00 232.20
714.00 257.04
714.00 257.04
2.12 39.96
857.33 W
8.57
865.90 X
121.66
987.56 Y
148.13
1135.69 Z
11.36
1147.05
114.71
114.70
Rate Amount
4382.15 74.50
35.00 6.06
645.00 232.20
714.00 257.04
714.00 257.04
2.12 39.96
866.79 W
8.67
875.46 X
123.00
998.46 Y
149.77
1148.23 Z
11.48
1159.72
115.97
115.95
Rate Amount
714.00 64.26
714.00 42.84
645.00 103.20
210.30 W
2.10
212.40 X
29.84
242.25 Y
36.34
278.58 Z
2.79
281.37
4.47
4.45
Rate Amount
120.00 816.00
30.00 20.40
35.00 23.80
2.12 2.48
784.00 266.56
645.00 219.30
2.12 29.49
55.50 103.23 A
115.10 214.09 A
1695.35 W
13.78
1709.13 X
195.55
1904.68 Y
238.10
2142.78 Z
18.25
2161.03
106.98
107.00
Rate Amount
4950.00 643.50
145.72 1.89
414.55 414.55 A
8843.45 265.30 A
3044.30 30.44
2.12 51.26
2.12 3.86
55.50 29.42 A
749.00 374.50
645.00 483.75
2.12 5.51
2303.99 W
15.95
2319.94 X
226.30
2546.23 Y
275.54
2821.78 Z
21.13
2842.90
246.14
246.15
Rate Amount
714.00 7.14
714.00 7.14
645.00 12.90
2.12 0.83
62.00 620.00
4850.00 169.75
5200.00 31.20
2.00 160.00
784.00 23.52
714.00 14.28
645.00 70.95
55.50 9.16 A
2.12 3.58
1130.45 W
11.21
1141.66 X
159.12
1300.78 Y
193.74
1494.52 Z
14.85
1509.37
150.94
150.95
Rate Amount
714.00 28.56
714.00 21.42
645.00 38.70
2.12 2.20
62.00 620.00
4850.00 485.00
5200.00 83.20
2.00 240.00
784.00 78.40
714.00 35.70
645.00 232.20
55.50 18.87 A
2.12 11.30
1895.55 W
18.77
1914.32 X
266.31
2180.63 Y
324.26
2504.90 Z
24.86
2529.76
252.98
253.00
Rate Amount
700.00 262.50
645.00 1290.00
1552.50 W
15.53
1568.03 X
220.31
1788.34 Y
268.25
2056.59 Z
20.57
2077.16
190.39
190.40
Rate Amount
165.00 178.20
645.00 406.35
714.00 224.91
2.12 13.67
823.13
823.13
823.15
Rate Amount
4590.00 2267.46
823.15 205.79
437.15 215.95
2.12 5.79
784.00 282.24
714.00 257.04
645.00 883.65
714.00 142.80
4260.72 W
42.61
4303.33 X
604.62
4907.95 Y
736.19
5644.14 Z
56.44
5700.58
5700.58
5700.60
Rate Amount
Rate Amount
1100.00 4290.00
187.35 7.49
309.00 305.91
39.00 156.00
40.00 48.00
784.00 1881.60
714.00 128.52
645.00 496.65
2.12 85.71
7399.89 W
74.00
7473.88 X
1050.08
8523.97 Y
1278.59
9802.56 Z
98.03
9900.59
4583.60
4583.60
Rate Amount
850.00 3315.00
187.35 7.49
309.00 305.91
39.00 156.00
40.00 48.00
784.00 1881.60
714.00 128.52
645.00 496.65
2.12 85.71
6424.88 W
64.25
6489.13 X
911.72
7400.85 Y
1110.13
8510.98 Z
85.11
8596.09
3979.67
3979.65
Rate Amount
1100.00 4620.00
309.00 392.43
39.00 156.00
40.00 48.00
49.00 9.80
35.00 2.80
187.35 7.87
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
7354.15 W
73.54
7427.69 X
1043.59
8471.28 Y
1270.69
9741.97 Z
97.42
9839.39
4555.27
4555.25
Rate Amount
850.00 3570.00
309.00 392.43
39.00 156.00
40.00 48.00
49.00 9.80
35.00 2.80
187.35 7.87
749.00 1370.67
714.00 164.22
645.00 496.65
2.12 85.71
6304.15 W
63.04
6367.19 X
894.59
7261.78 Y
1089.27
8351.05 Z
83.51
8434.56
3904.89
3904.90
Rate Amount
791.00 1423.80
187.35 3.37
2622.20 3959.52 A
80.00 48.00
49.00 9.80
60.00 28.80
35.00 2.80
714.00 214.20
5690.29 W
17.31
5707.60 X
245.61
5953.21 Y
299.05
6252.26 Z
22.93
6275.19
4155.75
4155.75
Rate Amount
140.00 280.00
45.00 90.00
2.12 5.79
2.12 3.31
35.50 71.00 A
2.12 5.79
2.12 3.31
459.20 W
3.88
463.08 X
55.09
518.17 Y
67.07
585.24 Z
5.14
590.38
295.19
295.20
Rate Amount
190.00 380.00
45.00 90.00
2.12 5.79
2.12 3.31
35.50 71.00 A
2.12 5.79
2.12 3.31
559.20 W
4.88
564.08 X
69.28
633.36 Y
84.35
717.71 Z
6.47
724.18
362.09
362.10
Rate Amount
4750.00 1458.25
4850.00 305.55
145.72 5.39
2.12 57.05
714.00 249.90
714.00 142.80
645.00 290.25
2509.19 W
25.09
2534.28 X
356.07
2890.35 Y
433.55
3323.90 Z
33.24
3357.14
99.71
99.70
Rate Amount
600.00 18360.00
187.35 57.33
714.00 499.80
645.00 935.25
714.00 499.80
47.10 37.68 A
2.12 57.05
20446.91 W
204.09
20651.00 X
2896.17
23547.17 Y
3526.42
27073.59 Z
270.36
27343.95
91146.50
91146.50
Rate Amount
357.00 10924.20
187.35 57.33
714.00 499.80
645.00 935.25
714.00 499.80
47.10 37.68 A
2.12 57.05
13011.11 W
129.73
13140.84 X
1840.99
14981.83 Y
2241.62
17223.45 Z
171.86
17395.31
57984.37
57984.35
Rate Amount
425.00 4250.00
220.00 176.00
2.12 7.72
784.00 313.60
645.00 129.00
4876.32 W
48.76
4925.08 X
691.97
5617.05 Y
842.56
6459.61 Z
64.60
6524.21
652.42
652.40
Rate Amount
285.00 2850.00
220.00 176.00
2.12 7.72
784.00 313.60
645.00 129.00
3476.32 W
34.76
3511.08 X
493.31
4004.39 Y
600.66
4605.05 Z
46.05
4651.10
465.11
465.10
Rate Amount
250.00 2500.00
170.00 136.00
2.12 7.72
784.00 313.60
645.00 129.00
3086.32 W
30.86
3117.18 X
437.96
3555.14 Y
533.27
4088.41 Z
40.88
4129.29
412.93
412.95
Rate Amount
480.00 4800.00
220.00 176.00
2.12 7.72
784.00 313.60
645.00 129.00
5426.32 W
54.26
5480.58 X
770.02
6250.60 Y
937.59
7188.19 Z
71.88
7260.07
726.01
726.00
Rate Amount
400.00 4000.00
220.00 176.00
2.12 7.72
784.00 313.60
645.00 129.00
4626.32 W
46.26
4672.58 X
656.50
5329.08 Y
799.36
6128.44 Z
61.28
6189.72
618.97
618.95
Rate Amount
390.00 3900.00
170.00 136.00
2.12 7.72
784.00 313.60
645.00 129.00
4486.32 W
44.86
4531.18 X
636.63
5167.81 Y
775.17
5942.98 Z
59.43
6002.41
600.24
600.25
Rate Amount
150.00 1500.00
100.00 60.00
2.12 7.72
784.00 156.80
1724.52 W
17.25
1741.76 X
244.72
1986.48 Y
297.97
2284.45 Z
22.84
2307.30
230.73
230.75
Rate Amount
130.00 1300.00
100.00 60.00
2.12 5.79
784.00 133.28
1499.07 W
14.99
1514.06 X
212.73
1726.78 Y
259.02
1985.80 Z
19.86
2005.66
200.57
200.55
Rate Amount
90.00 900.00
100.00 60.00
2.12 5.79
784.00 133.28
1099.07 W
10.99
1110.06 X
155.96
1266.02 Y
189.90
1455.92 Z
14.56
1470.48
147.05
147.05
Rate Amount
160.00 1600.00
170.00 68.00
2.12 5.79
784.00 54.88
2.12 13.50
1742.17 W
17.42
1759.59 X
247.22
2006.82 Y
301.02
2307.84 Z
23.08
2330.92
233.09
233.10
Rate Amount
600.00 600.00
2.12 1.93
784.00 47.04
648.97 W
6.49
655.46 X
92.09
747.55 Y
112.13
859.68 Z
8.60
868.28
86.83
86.85
Rate Amount
574.00 574.00
2.12 1.93
784.00 47.04
622.97 W
6.23
629.20 X
88.40
717.60 Y
107.64
825.24 Z
8.25
833.49
83.35
83.35
Rate Amount
510.00 510.00
2.12 1.93
784.00 47.04
558.97 W
5.59
564.56 X
79.32
643.88 Y
96.58
740.46 Z
7.40
747.87
74.79
74.80
Rate Amount
400.00 400.00
2.12 1.93
784.00 47.04
448.97 W
4.49
453.46 X
63.71
517.17 Y
77.58
594.75 Z
5.95
600.69
60.07
60.05
Rate Amount
345.00 345.00
2.12 1.93
784.00 47.04
393.97 W
3.94
397.91 X
55.91
453.82 Y
68.07
521.89 Z
5.22
527.11
52.71
52.70
Rate Amount
168.00 168.00
170.00 68.00
2.12 1.93
784.00 62.72
300.65 W
3.01
303.66 X
42.66
346.32 Y
51.95
398.27 Z
3.98
402.25
40.22
40.20
Rate Amount
36.00 360.00
100.00 40.00
2.12 1.93
784.00 78.40
480.33 W
4.80
485.13 X
68.16
553.29 Y
82.99
636.29 Z
6.36
642.65
64.27
64.25
Rate Amount
110.00 1100.00
100.00 40.00
2.12 1.93
784.00 78.40
1220.33 W
12.20
1232.53 X
173.17
1405.70 Y
210.86
1616.56 Z
16.17
1632.72
163.27
163.25
Rate Amount
290.00 2900.00
220.00 88.00
100.00 20.00
2.12 8.14
784.00 313.60
645.00 129.00
3458.74 W
34.59
3493.33 X
490.81
3984.14 Y
597.62
4581.76 Z
45.82
4627.58
462.76
462.75
Rate Amount
805.00 805.00
300.00 300.00
2.12 7.72
784.00 109.76
645.00 64.50
1286.98 W
12.87
1299.85 X
182.63
1482.48 Y
222.37
1704.85 Z
17.05
1721.89
172.19
172.20
Rate Amount
690.00 690.00
290.00 232.00
2.12 7.72
784.00 109.76
645.00 64.50
1103.98 W
11.04
1115.02 X
156.66
1271.68 Y
190.75
1462.43 Z
14.62
1477.05
147.71
147.70
Rate Amount
905.00 905.00
240.00 144.00
2.12 3.86
784.00 109.76
645.00 64.50
1227.12 W
12.27
1239.39 X
174.13
1413.52 Y
212.03
1625.55 Z
16.26
1641.81
164.18
164.20
Rate Amount
421.00 421.00
240.00 144.00
2.12 3.86
784.00 109.76
645.00 64.50
743.12 W
7.43
750.55 X
105.45
856.00 Y
128.40
984.40 Z
9.84
994.25
99.42
99.40
Rate Amount
180.00 180.00
160.00 64.00
2.12 1.93
784.00 62.72
308.65 W
3.09
311.74 X
43.80
355.53 Y
53.33
408.86 Z
4.09
412.95
41.30
41.30
Rate Amount
172.00 1720.00
2.12 13.50
714.00 178.50
1912.00 W
19.12
1931.12 X
271.32
2202.45 Y
330.37
2532.81 Z
25.33
2558.14
255.81
255.80
Rate Amount
7911.85 7911.85
145.72 882.19
784.00 12152.00
645.00 19995.00
2.12 2194.20
43135.24 W
431.35
43566.59 X
6121.11
49687.70 Y
7453.15
57140.85 Z
571.41
57712.26
285.00
285.00
Rate Amount
145.00 2030.00
60.00 225925.20
40.00 4959.20
5200.00 1965.60
46.00 5520.00
765.00 68850.00
48.00 63072.00
(P) 372322.00
(Q) 37232.20
('R) -93080.50
316473.70
7911.84
7911.85
Rate Amount
45.00 450.00
2.12 266.23
2.12 7.72
723.95 W
7.24
731.19 X
102.73
833.92 Y
125.09
959.01 Z
9.59
968.60
484.30
484.30
Rate Amount
170.00 170.00
2.12 266.23
2.12 7.72
443.95 W
4.44
448.39 X
63.00
511.39 Y
76.71
588.10 Z
5.88
593.98
59.40
59.40
Rate Amount
15.00 1875.00
2.12 44.73
749.00 906.29
645.00 348.30
645.00 832.05
2.12 32.25
4038.62 W
40.39
4079.01 X
573.10
4652.11 Y
697.82
5349.93 Z
53.50
5403.43
540.34
540.35
Rate Amount
1800.00 45.00
163.93 40.98
2.12 63.60
714.00 714.00
645.00 645.00
1508.58 W
15.09
1523.67 X
214.08
1737.75 Y
260.66
1998.41 Z
19.98
2018.39
0.40
0.40
Rate Amount
645.00 645.00
2.12 23.74
668.74 W
6.69
675.43 X
94.90
770.33 Y
115.55
885.88 Z
8.86
894.74
89.47
89.45
Rate Amount
2.12 731.40
1500.00 3.00
40000.00 40000.00
714.00 2856.00
853.00 853.00
44443.40 W
444.43
44887.83 X
6306.74
51194.57 Y
7679.19
58873.76 Z
588.74
59462.50
285.88
285.90
Rate Amount
700.00 1190.00
645.00 7017.60
645.00 3308.85
645.00 1470.60
714.00 1627.92
2.12 302.10
1800.00 1026.00
250.00 3562.50
714.00 10174.50
200.00 400.00
645.00 161.25
190.00 95.00
645.00 40.31
30376.63 W
303.77
30680.40 X
4310.60
34991.00 Y
5248.65
40239.65 Z
402.40
40642.05
71.30
71.30
Rate Amount
714.00 71.40
645.00 64.50
645.00 129.00
2.12 2.33
267.23 W
2.67
269.90 X
37.92
307.82 Y
46.17
353.99 Z
3.54
357.53
357.53
357.55
Rate Amount
475.00 475.00
103.00 103.00
325.00 325.00
2.12 28.32
2.12 28.66
25.00 -50.00
645.00 32.25
645.00 129.00
784.00 627.20
645.00 516.00
2214.43 W
22.14
2236.57 X
314.24
2550.81 Y
382.62
2933.43 Z
29.33
2962.76
2962.76
2962.75
Rate Amount
1290.00 1290.00
325.00 325.00
2.12 28.32
2.12 28.66
25.00 -50.00
645.00 32.25
645.00 80.63
784.00 627.20
645.00 516.00
2878.06 W
28.78
2906.84 X
408.41
3315.25 Y
497.29
3812.54 Z
38.13
3850.67
3850.67
3850.65
Rate Amount
307.25 921.75 A
810.00 202.50
2.12 17.09
784.00 86.24
714.00 78.54
645.00 709.50
2.12 34.17
2049.79 W
11.28
2061.07 X
160.07
2221.14 Y
194.91
2416.05 Z
14.94
2430.99
243.10
243.10
Rate Amount
645.00 80.63
2.12 2.12
82.75 W
0.83
83.58 X
11.74
95.32 Y
14.30
109.62 Z
1.10
110.72
110.72
110.70
Rate Amount
645.00 19.35
2.12 2.12
21.47 W
0.21
21.68 X
3.05
24.73 Y
3.71
28.44 Z
0.28
28.72
2.87
2.85
Rate Amount
2.12 21.20
21.20 W
0.21
21.41 X
3.01
24.42 Y
3.66
28.08 Z
0.28
28.36
2.84
2.85
Rate Amount
60.00 14.40
749.00 134.82
645.00 116.10
265.32 W
2.65
267.97 X
37.65
305.62 Y
45.84
351.47 Z
3.51
354.98
325.94
325.95
Rate Amount
80.00 5280.00
47.00 564.00
34790.00 3757.32
163.93 19.67
2.12 16.54
440.00 76.56
187.35 3.26
2.12 285.25
714.00 1542.24
645.00 2089.80
784.00 141.12
2.12 14.33
13790.08 W
137.90
13927.99 X
1956.88
15884.87 Y
2382.73
18267.60 Z
182.68
18450.27
615.01
615.00
Rate Amount
120.00 3960.00
47.00 564.00
34790.00 2504.88
163.93 13.77
2.12 16.54
440.00 76.56
187.35 3.26
2.12 285.25
714.00 1128.12
645.00 1528.65
784.00 101.92
2.12 14.33
10197.27 W
101.97
10299.25 X
1447.04
11746.29 Y
1761.94
13508.23 Z
135.08
13643.32
454.78
454.80
Rate Amount
120.00 7920.00
47.00 564.00
34790.00 3757.32
163.93 19.67
2.12 16.54
440.00 76.56
187.35 3.26
2.12 285.25
714.00 1542.24
645.00 2089.80
784.00 141.12
2.12 14.33
16430.08 W
164.30
16594.39 X
2331.51
18925.90 Y
2838.88
21764.78 Z
217.65
21982.43
732.75
732.75
Rate Amount
130.00 4290.00
85.00 1020.00
163.93 1.97
2.12 16.54
84.00 588.00
2.12 105.00
784.00 1693.44
784.00 141.12
645.00 2089.80
2.12 49.61
9995.47 W
99.95
10095.43 X
1418.41
11513.84 Y
1727.08
13240.91 Z
132.41
13373.32
445.78
445.80
Rate Amount
190.00 6270.00
85.00 1020.00
163.83 1.97
2.12 16.54
84.00 588.00
2.12 105.00
784.00 1693.44
784.00 141.12
645.00 2089.80
2.12 49.61
11975.48 W
119.75
12095.23 X
1699.38
13794.61 Y
2069.19
15863.80 Z
158.64
16022.44
534.08
534.10
Rate Amount
210.00 6930.00
85.00 1020.00
163.83 1.97
2.12 16.54
84.00 588.00
2.12 105.00
784.00 1693.44
784.00 141.12
645.00 2089.80
2.12 49.61
12635.48 W
126.35
12761.83 X
1793.04
14554.87 Y
2183.23
16738.10 Z
167.38
16905.48
563.52
563.50
Rate Amount
45.00 1417.50
2.12 16.54
784.00 337.12
784.00 31.36
645.00 419.25
2.12 99.22
2320.99 W
23.21
2344.20 X
329.36
2673.56 Y
401.03
3074.59 Z
30.75
3105.34
103.51
103.50
Rate Amount
784.00 784.00
2.12 21.20
805.20 W
8.05
813.25 X
114.26
927.51 Y
139.13
1066.64 Z
10.67
1077.31
1077.31
1077.30
Rate Amount
853.00 853.00
2.12 21.20
874.20 W
8.74
882.94 X
124.05
1006.99 Y
151.05
1158.04 Z
11.58
1169.62
1169.62
1169.60
Rate Amount
645.00 283.80
645.00 238.65
2.12 2.20
524.65 W
5.25
529.90 X
74.45
604.35 Y
90.65
695.01 Z
6.95
701.96
701.95
Rate Amount
645.00 1025.55
645.00 464.40
2.12 10.20
1500.15 W
15.00
1515.15 X
212.88
1728.03 Y
259.20
1987.23 Z
19.87
2007.10
2007.10
Rate Amount
645.00 567.60
645.00 354.75
2.12 4.13
926.48 W
9.26
935.75 X
131.47
1067.22 Y
160.08
1227.30 Z
12.27
1239.58
1239.60
Rate Amount
645.00 1709.25
645.00 464.40
2.12 14.88
2188.53 W
21.89
2210.42 X
310.56
2520.98 Y
378.15
2899.13 Z
28.99
2928.12
2928.10
Rate Amount
645.00 1367.40
645.00 580.50
2.12 9.92
1957.82 W
19.58
1977.40 X
277.82
2255.22 Y
338.28
2593.51 Z
25.94
2619.44
2619.45
Rate Amount
714.00 357.00
645.00 322.50
2.12 28.39
707.89 W
7.08
714.97 X
100.45
815.42 Y
122.31
937.73 Z
9.38
947.11
947.10
Rate Amount
714.00 178.50
645.00 322.50
2.12 28.39
529.39 W
5.29
534.68 X
75.12
609.80 Y
91.47
701.27 Z
7.01
708.29
7.47
7.45
Rate Amount
645.00 193.50
645.00 238.65
2.12 2.20
434.35 W
4.34
438.70 X
61.64
500.34 Y
75.05
575.39 Z
5.75
581.14
581.15
Rate Amount
645.00 799.80
645.00 296.70
2.12 2.20
1098.70 W
10.99
1109.69 X
155.91
1265.60 Y
189.84
1455.44 Z
14.55
1470.00
1470.00
Rate Amount
645.00 283.80
645.00 238.65
2.12 2.20
524.65 W
5.25
529.90 X
74.45
604.35 Y
90.65
695.01 Z
6.95
701.96
701.95
Rate Amount
645.00 683.70
645.00 580.50
2.12 5.24
1269.44 W
12.69
1282.13 X
180.14
1462.27 Y
219.34
1681.61 Z
16.82
1698.43
1698.45
Rate Amount
645.00 1548.00
645.00 1032.00
714.00 285.60
2.12 3.86
2869.46 W
28.69
2898.15 X
407.19
3305.34 Y
495.80
3801.14 Z
38.01
3839.16
3839.15
Rate Amount
645.00 1806.00
645.00 903.00
714.00 571.20
2.12 19.02
3299.22 W
32.99
3332.21 X
468.18
3800.38 Y
570.06
4370.44 Z
43.70
4414.15
4414.15
Rate Amount
645.00 2257.50
645.00 967.50
714.00 885.36
2.12 17.09
4127.45 W
41.27
4168.72 X
585.71
4754.43 Y
713.16
5467.59 Z
54.68
5522.27
5522.25
Rate Amount
645.00 393.45
645.00 316.05
2.12 4.13
713.63 W
7.14
720.77 X
101.27
822.04 Y
123.31
945.34 Z
9.45
954.80
954.80
Rate Amount
645.00 838.50
645.00 670.80
2.12 5.79
1515.09 W
15.15
1530.24 X
215.00
1745.24 Y
261.79
2007.02 Z
20.07
2027.09
2027.10
Rate Amount
645.00 503.10
645.00 393.45
2.12 5.79
902.34 W
9.02
911.36 X
128.05
1039.41 Y
155.91
1195.32 Z
11.95
1207.27
1207.25
Rate Amount
645.00 999.75
645.00 767.55
2.12 5.79
1773.09 W
17.73
1790.82 X
251.61
2042.43 Y
306.36
2348.79 Z
23.49
2372.28
2372.30
Rate Amount
714.00 35.70
645.00 129.00
645.00 129.00
2.12 1.10
294.80 W
2.95
297.75 X
41.83
339.58 Y
50.94
390.52 Z
3.91
394.43
394.45
Rate Amount
714.00 35.70
645.00 258.00
645.00 129.00
2.12 1.93
424.63 W
4.25
428.88 X
60.26
489.13 Y
73.37
562.50 Z
5.63
568.13
568.15
Rate Amount
714.00 71.40
645.00 116.10
714.00 35.70
2.12 3.03
226.23 W
2.26
228.49 X
32.10
260.60 Y
39.09
299.69 Z
3.00
302.68
302.70
Rate Amount
714.00 92.82
645.00 161.25
714.00 49.98
2.12 5.79
309.84 W
3.10
312.94 X
43.97
356.90 Y
53.54
410.44 Z
4.10
414.54
414.55
Rate Amount
714.00 35.70
645.00 51.60
2.12 1.10
88.40 W
0.88
89.29 X
12.54
101.83 Y
15.27
117.11 Z
1.17
118.28
118.30
Rate Amount
714.00 49.98
645.00 64.50
2.12 1.93
116.41 W
1.16
117.57 X
16.52
134.09 Y
20.11
154.21 Z
1.54
155.75
155.75
Rate Amount
714.00 1428.00
645.00 1290.00
2.12 28.39
2746.39 W
27.46
2773.85 X
389.73
3163.58 Y
474.54
3638.11 Z
36.38
3674.49
3674.50
Rate Amount
714.00 57.12
645.00 51.60
2.12 1.10
109.82 W
1.10
110.92 X
15.58
126.50 Y
18.98
145.48 Z
1.45
146.94
14.69
14.70
Rate Amount
714.00 142.80
645.00 193.50
2.12 28.39
364.69 W
3.65
368.33 X
51.75
420.08 Y
63.01
483.10 Z
4.83
487.93
487.95
Rate Amount
714.00 4.28
645.00 5.16
2.12 0.83
10.27 W
0.10
10.37 X
1.46
11.83 Y
1.77
13.61 Z
0.14
13.74
1.37
1.35
Rate Amount
714.00 178.50
645.00 322.50
2.12 28.39
529.39 W
5.29
534.68 X
75.12
609.80 Y
91.47
701.27 Z
7.01
708.29
708.30
Rate Amount
714.00 7.14
645.00 12.90
2.12 0.83
20.87 W
0.21
21.08 X
2.96
24.04 Y
3.61
27.64 Z
0.28
27.92
2.79
2.80
Rate Amount
714.00 35.70
714.00 71.40
645.00 96.75
2.12 5.79
209.64 W
2.10
211.73 X
29.75
241.48 Y
36.22
277.70 Z
2.78
280.48
2.80
2.80
Rate Amount
714.00 35.70
714.00 35.70
645.00 64.50
2.12 5.79
141.69 W
1.42
143.10 X
20.11
163.21 Y
24.48
187.69 Z
1.88
189.57
1.90
1.90
Rate Amount
714.00 107.10
714.00 71.40
645.00 161.25
2.12 8.82
348.57 W
3.49
352.05 X
49.46
401.52 Y
60.23
461.75 Z
4.62
466.36
4.66
4.65
Rate Amount
714.00 71.40
645.00 161.25
2.12 5.79
238.44 W
2.38
240.82 X
33.84
274.66 Y
41.20
315.86 Z
3.16
319.01
3.19
3.20
Rate Amount
714.00 14.28
645.00 38.70
2.12 0.83
53.81 W
0.54
54.34 X
7.64
61.98 Y
9.30
71.28 Z
0.71
71.99
0.72
0.70
Rate Amount
714.00 14.28
645.00 38.70
2.12 0.83
53.81 W
0.54
54.34 X
7.64
61.98 Y
9.30
71.28 Z
0.71
71.99
0.72
0.70
Rate Amount
784.00 156.80
645.00 129.00
285.80 W
2.86
288.66 X
40.56
329.21 Y
49.38
378.60 Z
3.79
382.38
3.82
3.80
Rate Amount
714.00 214.20
645.00 77.40
645.00 154.80
2.12 5.79
452.19 W
4.52
456.71 X
64.17
520.88 Y
78.13
599.01 Z
5.99
605.00
60.50
60.50
Rate Amount
714.00 421.26
645.00 116.10
645.00 154.80
2.12 5.79
697.95 W
6.98
704.93 X
99.04
803.97 Y
120.60
924.56 Z
9.25
933.81
93.38
93.40
Rate Amount
645.00 161.25
645.00 645.00
2.12 5.79
812.04 W
8.12
820.16 X
115.23
935.39 Y
140.31
1075.70 Z
10.76
1086.46
1086.45
Rate Amount
645.00 1141.65
645.00 483.75
2.12 17.09
1642.49 W
16.42
1658.91 X
233.08
1891.99 Y
283.80
2175.79 Z
21.76
2197.55
219.75
219.75
Rate Amount
714.00 385.56
645.00 103.20
645.00 154.80
2.12 5.24
648.80 W
6.49
655.28 X
92.07
747.35 Y
112.10
859.45 Z
8.59
868.05
86.80
86.80
Rate Amount
645.00 161.25
645.00 399.90
2.12 2.20
563.35 W
5.63
568.99 X
79.94
648.93 Y
97.34
746.27 Z
7.46
753.73
753.75
Rate Amount
714.00 357.00
645.00 645.00
2.12 14.33
1016.33 W
10.16
1026.49 X
144.22
1170.72 Y
175.61
1346.32 Z
13.46
1359.79
135.98
136.00
Rate Amount
714.00 142.80
645.00 322.50
2.12 11.30
476.60 W
4.77
481.37 X
67.63
549.00 Y
82.35
631.35 Z
6.31
637.66
63.77
63.75
Rate Amount
645.00 1141.65
645.00 483.75
2.12 17.09
1642.49 W
16.42
1658.91 X
233.08
1891.99 Y
283.80
2175.79 Z
21.76
2197.55
2197.55
Rate Amount
645.00 767.55
645.00 780.45
2.12 17.09
1565.09 W
15.65
1580.74 X
222.09
1802.83 Y
270.42
2073.26 Z
20.73
2093.99
209.40
209.40
Rate Amount
645.00 1115.85
645.00 161.25
2.12 17.09
1294.19 W
12.94
1307.13 X
183.65
1490.78 Y
223.62
1714.40 Z
17.14
1731.54
173.15
173.15
Rate Amount
645.00 348.30
2.12 7.72
356.02 W
3.56
359.58 X
50.52
410.10 Y
61.51
471.61 Z
4.72
476.33
47.63
47.65
Rate Amount
645.00 322.50
645.00 322.50
2.12 1.10
646.10 W
6.46
652.56 X
91.69
744.25 Y
111.64
855.89 Z
8.56
864.44
17.29
17.30
Rate Amount
645.00 69.02
645.00 43.22
2.12 0.55
2.12 28.39
2.12 3.03
144.20 W
1.44
145.64 X
20.46
166.10 Y
24.92
191.02 Z
1.91
192.93
192.95
Rate Amount
645.00 62.57
645.00 38.70
2.12 0.55
2.12 28.39
2.12 17.09
2.12 5.79
153.08 W
1.53
154.61 X
21.72
176.33 Y
26.45
202.78 Z
2.03
204.81
204.80
Rate Amount
2.12 5.79
2.12 3.03
8.82 W
0.09
8.91 X
1.25
10.16 Y
1.52
11.68 Z
0.12
11.80
11.80
Rate Amount
645.00 2257.50
2.12 11.30
2268.80 W
22.69
2291.49 X
321.95
2613.44 Y
392.02
3005.46 Z
30.05
3035.51
30.36
30.35
Rate Amount
714.00 71.40
645.00 161.25
645.00 161.25
2.12 5.79
399.69 W
4.00
403.68 X
56.72
460.40 Y
69.06
529.46 Z
5.29
534.76
53.48
53.50
Rate Amount
714.00 71.40
645.00 258.00
645.00 129.00
2.12 8.82
467.22 W
4.67
471.89 X
66.30
538.19 Y
80.73
618.92 Z
6.19
625.11
62.51
62.50
Rate Amount
714.00 107.10
645.00 129.00
645.00 129.00
2.12 11.30
376.40 W
3.76
380.16 X
53.41
433.58 Y
65.04
498.61 Z
4.99
503.60
50.36
50.35
Rate Amount
714.00 142.80
645.00 161.25
645.00 161.25
2.12 14.33
479.63 W
4.80
484.43 X
68.06
552.49 Y
82.87
635.36 Z
6.35
641.72
64.17
64.15
Rate Amount
714.00 142.80
645.00 193.50
645.00 193.50
2.12 28.39
558.19 W
5.58
563.77 X
79.21
642.98 Y
96.45
739.42 Z
7.39
746.82
74.68
74.70
Rate Amount
714.00 142.80
645.00 1290.00
645.00 322.50
2.12 28.39
1783.69 W
17.84
1801.52 X
253.11
2054.64 Y
308.20
2362.83 Z
23.63
2386.46
238.65
238.65
Rate Amount
714.00 214.20
645.00 1935.00
645.00 483.75
2.12 39.96
2672.91 W
26.73
2699.64 X
379.30
3078.94 Y
461.84
3540.78 Z
35.41
3576.19
357.62
357.60
Rate Amount
714.00 142.80
645.00 193.50
2.12 11.30
347.60 W
3.48
351.08 X
49.33
400.40 Y
60.06
460.46 Z
4.60
465.07
46.51
46.50
Rate Amount
645.00 232.20
645.00 232.20
2.12 1.93
466.33 W
4.66
470.99 X
66.17
537.17 Y
80.58
617.74 Z
6.18
623.92
62.39
62.40
Rate Amount
645.00 232.20
645.00 245.10
2.12 3.31
480.61 W
4.81
485.41 X
68.20
553.61 Y
83.04
636.66 Z
6.37
643.02
64.30
64.30
Rate Amount
645.00 232.20
645.00 258.00
2.12 4.41
494.61 W
4.95
499.56 X
70.19
569.74 Y
85.46
655.20 Z
6.55
661.76
66.18
66.20
Rate Amount
645.00 3096.00
645.00 1548.00
2.12 190.16
4834.16 W
48.34
4882.51 X
685.99
5568.50 Y
835.27
6403.77 Z
64.04
6467.81
179.66
179.65
Rate Amount
645.00 6192.00
645.00 3096.00
2.12 228.20
9516.20 W
95.16
9611.36 X
1350.40
10961.75 Y
1644.26
12606.02 Z
126.06
12732.08
353.67
353.65
Rate Amount
645.00 425.70
645.00 425.70
2.12 76.07
927.47 W
9.27
936.74 X
131.61
1068.35 Y
160.25
1228.61 Z
12.29
1240.89
124.09
124.10
Rate Amount
645.00 425.70
645.00 425.70
2.12 152.13
1003.53 W
10.04
1013.57 X
142.41
1155.97 Y
173.40
1329.37 Z
13.29
1342.66
134.27
134.25
Rate Amount
286.85 4638.36 A
253.95 4106.37 A
500.00 230.00
50.00 19.00
714.00 449.82
645.00 2902.50
2.12 114.10
12460.15 W
37.15
12497.31 X
527.24
13024.55 Y
641.97
13666.52 Z
49.22
13715.73
340.68
340.70
Rate Amount
286.85 4951.03 A
253.95 4383.18 A
500.00 515.00
50.00 57.00
714.00 928.20
645.00 4837.50
2.12 171.15
15843.06 W
65.09
15908.15 X
923.64
16831.79 Y
1124.64
17956.43 Z
86.22
18042.65
448.15
448.15
Rate Amount
286.85 5272.30 A
253.95 4667.60 A
500.00 700.00
50.00 113.50
714.00 1606.50
645.00 7417.50
2.12 285.25
20062.65 W
101.23
20163.88 X
1436.47
21600.35 Y
1749.07
23349.42 Z
134.10
23483.52
583.30
583.30
Rate Amount
645.00 3431.40
645.00 3521.70
714.00 221.34
500.00 700.00
50.00 113.50
714.00 1606.50
645.00 7417.50
2.12 285.25
17297.19 W
172.97
17470.16 X
2454.56
19924.72 Y
2988.71
22913.43 Z
229.13
23142.56
574.83
574.85
Rate Amount
645.00 10203.90
645.00 10481.25
714.00 664.02
500.00 1540.00
50.00 250.00
714.00 7140.00
645.00 12900.00
2.12 380.33
43559.50 W
435.60
43995.10 X
6181.31
50176.41 Y
7526.46
57702.87 Z
577.03
58279.90
1447.59
1447.60
Rate Amount
645.00 748.20
645.00 767.55
714.00 49.98
645.00 232.20
645.00 245.10
2.12 3.31
2046.34 W
20.46
2066.80 X
290.39
2357.19 Y
353.58
2710.77 Z
27.11
2737.88
273.79
273.80
Rate Amount
645.00 799.80
645.00 825.60
714.00 49.98
645.00 232.20
645.00 567.60
2.12 7.99
2483.17 W
24.83
2508.00 X
352.37
2860.37 Y
429.06
3289.43 Z
32.89
3322.32
332.23
332.25
Rate Amount
645.00 322.50
645.00 90.30
2.12 2.76
2.12 15.16
430.72 W
4.31
435.03 X
61.12
496.15 Y
74.42
570.57 Z
5.71
576.28
576.28
576.30
Rate Amount
645.00 187.05
645.00 51.60
2.12 1.38
2.12 11.30
251.33 W
2.51
253.84 X
35.66
289.50 Y
43.43
332.93 Z
3.33
336.26
336.26
336.25
Rate Amount
645.00 522.45
645.00 328.95
2.12 3.86
645.00 103.20
645.00 45.15
2.12 1.10
784.00 196.00
784.00 94.08
714.00 85.68
714.00 714.00
645.00 645.00
2.12 114.10
2853.57 W
28.54
2882.11 X
404.94
3287.05 Y
493.06
3780.11 Z
37.80
3817.91
3817.91
3817.90
Rate Amount
645.00 90.30
645.00 58.05
2.12 0.55
645.00 161.25
645.00 141.90
2.12 1.10
645.00 83.85
645.00 38.70
2.12 0.83
2.12 15.16
591.69 W
5.92
597.61 X
83.96
681.57 Y
102.24
783.81 Z
7.84
791.65
791.65
791.65
Rate Amount
784.00 196.00
645.00 322.50
2.12 38.03
556.53 W
5.57
562.10 X
78.98
641.08 Y
96.16
737.24 Z
7.37
744.61
744.61
744.60
Rate Amount
784.00 470.40
714.00 285.60
645.00 1032.00
2.12 190.16
1978.16 W
19.78
1997.94 X
280.71
2278.65 Y
341.80
2620.45 Z
26.20
2646.65
264.67
264.65
Rate Amount
784.00 1881.60
714.00 1099.56
645.00 4128.00
2.12 190.16
7299.32 W
72.99
7372.31 X
1035.81
8408.12 Y
1261.22
9669.34 Z
96.69
9766.03
976.60
976.60
Rate Amount
784.00 1176.00
714.00 714.00
645.00 2580.00
4470.00 W
44.70
4514.70 X
634.32
5149.02 Y
772.35
5921.37 Z
59.21
5980.58
598.06
598.05
Rate Amount
645.00 122.55
645.00 77.40
2.12 0.83
645.00 225.75
645.00 193.50
2.12 1.93
645.00 38.70
645.00 19.35
2.12 0.28
680.28 W
6.80
687.08 X
96.54
783.62 Y
117.54
901.16 Z
9.01
910.17
910.15
Rate Amount
645.00 199.95
645.00 122.55
2.12 1.38
645.00 322.50
645.00 270.90
2.12 2.76
645.00 83.85
645.00 38.70
2.12 0.83
1043.41 W
10.43
1053.84 X
148.07
1201.91 Y
180.29
1382.20 Z
13.82
1396.02
1396.00
Rate Amount
645.00 283.80
645.00 180.60
2.12 1.93
645.00 445.05
645.00 380.55
2.12 3.31
645.00 122.55
645.00 58.05
2.12 1.10
1476.94 W
14.77
1491.71 X
209.59
1701.30 Y
255.20
1956.50 Z
19.57
1976.07
1976.07
1976.05
Rate Amount
645.00 232.20
645.00 51.60
714.00 49.98
2.12 3.03
336.81 W
3.37
340.18 X
47.80
387.98 Y
58.20
446.18 Z
4.46
450.64
45.06
45.05
Rate Amount
713.00 142.60
645.00 193.50
2.12 11.41
347.51 W
3.48
350.99 X
49.31
400.30 Y
60.05
460.35 Z
4.60
464.95
46.50
46.50
Rate Amount
714.00 21.42
714.00 357.00
645.00 322.50
714.00 357.00
645.00 322.50
1600.00 200.00
1200.00 60.00
800.00 100.00
1740.42 W
17.40
1757.82 X
246.97
2004.79 Y
300.72
2305.51 Z
23.06
2328.57
2328.57
2328.55
Rate Amount
714.00 7.14
645.00 193.50
1200.00 57.00
1200.00 2.40
260.04 W
2.60
262.64 X
36.90
299.54 Y
44.93
344.47 Z
3.44
347.91
347.91
347.90
Rate Amount
163.93 163.93
163.93 W
1.64
165.57 X
23.26
188.83 Y
28.32
217.16 Z
2.17
219.33
219.35
Rate . Amount .
714.00 1285.20
645.00 11610.00
645.00 174.15
3000.00 162.00
645.00 34.83
2.12 14.33
3000.00 162.00
645.00 34.83
2.12 14.33
13491.67 W
134.92
13626.59 X
1914.54
15541.12 Y
2331.17
17872.29 Z
178.72
18051.02
180.51
180.50
Rate . Amount .
714.00 121.38
3000.00 24.00
645.00 5.16
2.12 3.03
153.57 W
1.54
155.11 X
21.79
176.90 Y
26.53
203.43 Z
2.03
205.47
20.55
20.55
Rate . Amount .
1360.00 136.00
1360.00 884.00
1000.00 250.00
178.19 178.19
1448.19 W
14.48
1462.67 X
205.51
1668.18 Y
250.23
1918.40 Z
19.18
1937.59
1937.60
Rate . Amount .
1360.00 136.00
1000.00 650.00
1000.00 250.00
178.19 178.19
1214.19 W
12.14
1226.33 X
172.30
1398.63 Y
209.79
1608.43 Z
16.08
1624.51
1624.50
Rate . Amount .
1000.00 50.00
1000.00 300.00
1300.00 845.00
178.19 178.19
1373.19 W
13.73
1386.92 X
194.86
1581.78 Y
237.27
1819.05 Z
18.19
1837.24
1837.25
Rate . Amount .
550.00 550.00
178.19 178.19
728.19 W
7.28
735.47 X
103.33
838.81 Y
125.82
964.63 Z
9.65
974.27
974.25
Rate . Amount .
600.00 600.00
178.19 178.19
778.19 W
7.78
785.97 X
110.43
896.40 Y
134.46
1030.86 Z
10.31
1041.17
1041.15
Rate . Amount .
1200.00 60.00
1200.00 960.00
1400.00 210.00
163.93 163.93
1393.93 W
13.94
1407.87 X
197.81
1605.67 Y
240.85
1846.53 Z
18.47
1864.99
1865.00
Rate . Amount .
1200.00 120.00
1400.00 1050.00
1400.00 210.00
163.93 139.34
163.93 24.59
1543.93 W
15.44
1559.37 X
219.09
1778.46 Y
266.77
2045.23 Z
20.45
2065.68
2065.70
Rate . Amount .
1000.00 1000.00
163.93 163.93
1163.93 W
11.64
1175.57 X
165.17
1340.74 Y
201.11
1541.85 Z
15.42
1557.27
1557.25
Rate . Amount .
645.00 114.17
645.00 107.72
40.00 40.00
204.92 204.92
466.80 W
4.67
471.47 X
66.24
537.71 Y
80.66
618.37 Z
6.18
624.55
624.55
Rate . Amount .
500.00 500.00
163.93 163.93
663.93 W
6.64
670.57 X
94.21
764.78 Y
114.72
879.50 Z
8.80
888.30
888.30
Rate . Amount .
645.00 167.70
645.00 167.70
714.00 185.64
3000.00 99.00
645.00 21.29
2.12 5.79
647.11 W
6.47
653.58 X
91.83
745.41 Y
111.81
857.22 Z
8.57
865.80
865.80
Rate . Amount .
645.00 225.75
645.00 167.70
714.00 128.52
3000.00 12.00
645.00 2.58
2.12 5.79
542.34 W
5.42
547.76 X
76.96
624.72 Y
93.71
718.43 Z
7.18
725.61
725.60
Rate . Amount .
645.00 225.75
645.00 167.70
714.00 128.52
3000.00 12.00
645.00 2.58
2.12 5.79
542.34 W
5.42
547.76 X
76.96
624.72 Y
93.71
718.43 Z
7.18
725.61
725.60
Rate . Amount .
1000.00 600.00
163.93 98.36
645.00 348.30
714.00 385.56
3000.00 162.00
645.00 34.83
1629.05 W
16.29
1645.34 X
231.17
1876.51 Y
281.48
2157.98 Z
21.58
2179.56
21.80
21.80
Rate . Amount .
4590.00 734.40
437.15 69.94
784.00 133.28
714.00 121.38
645.00 225.75
2.12 38.03
2.12 19.02
1341.80 W
13.42
1355.22 X
190.41
1545.63 Y
231.84
1777.47 Z
17.77
1795.25
179.52
179.50
Rate . Amount .
4590.00 224.91
437.15 21.42
784.00 31.36
714.00 28.56
645.00 58.05
2.12 8.82
373.12 W
3.73
376.85 X
52.95
429.80 Y
64.47
494.27 Z
4.94
499.21
49.92
49.90
Rate . Amount .
645.00 870.75
645.00 696.60
3000.00 396.00
645.00 85.14
2.12 11.58
2060.07 W
20.60
2080.67 X
292.33
2373.00 Y
355.95
2728.95 Z
27.29
2756.24
27.56
27.55
Rate . Amount .
205.45 1540.88 A
650.00 4875.00
178.19 1336.43
1557.25 1868.70 A
888.30 1065.96 A
645.00 1257.75
645.00 1696.35
714.00 963.90
3000.00 405.00
645.00 87.08
2.12 42.72
3000.00 162.00
645.00 34.83
15336.58 W
108.61
15445.19 X
1541.24
16986.43 Y
1876.63
18863.06 Z
143.88
19006.94
190.07
190.05
Rate . Amount .
600.00 1350.00
145.72 735.89
784.00 846.72
714.00 771.12
645.00 1386.75
645.00 1038.45
2.12 14.33
6143.26 W
61.43
6204.69 X
871.76
7076.45 Y
1061.47
8137.92 Z
81.38
8219.30
821.93
821.95
Rate . Amount .
4590.00 2960.55
437.15 281.96
784.00 313.60
714.00 285.60
645.00 696.60
4538.31 W
45.38
4583.69 X
644.01
5227.70 Y
784.16
6011.86 Z
60.12
6071.98
607.20
607.20
Rate . Amount .
1837.25 165.35 A
1557.25 35.82 A
888.30 19.54 A
1200.00 110.40
163.93 15.08
25614.00 281.75
163.93 1.80
645.00 619.20
645.00 309.60
645.00 154.80
645.00 154.80
645.00 457.95
645.00 309.60
714.00 71.40
645.00 309.60
645.00 309.60
2.12 85.71
3412.00 W
31.91
3443.91 X
452.86
3896.79 Y
551.41
4448.20 Z
42.27
4490.47
4157.85
4157.85
Rate . Amount .
1837.25 165.35 A
1557.25 35.82 A
888.30 19.54 A
645.00 309.60
645.00 154.80
645.00 154.80
645.00 154.80
645.00 309.60
645.00 309.60
714.00 71.40
2.12 114.10
1799.41 W
15.79
1815.20 X
224.03
2039.23 Y
272.78
2312.01 Z
20.91
2332.92
2592.12
2592.10
Rate . Amount .
650.00 123.50
178.19 33.86
1557.25 93.44 A
888.30 53.30 A
645.00 1032.00
645.00 516.00
1852.09 W
17.05
1869.14 X
242.00
2111.14 Y
294.66
2405.80 Z
22.59
2428.39
242.84
242.85
Rate . Amount .
7783.65 2615.31 A
645.00 21.93
714.00 47.84
784.00 10.19
714.00 9.28
714.00 9.28
87.50 2313.50 A
307.95 2152.57 A
5000.00 250.00
145.72 7.29
900.00 63.00
163.93 11.48
645.00 32.25
714.00 14.28
749.00 479.36
645.00 516.00
714.00 192.78
2.12 4.13
2.12 28.11
2.12 24.53
2.12 114.10
2.12 25.91
2.12 28.66
8971.77 W
18.90
8990.68 X
268.26
9258.93 Y
326.63
9585.57 Z
25.04
9610.61
28603.00
28603.00
Rate . Amount .
430.00 11610.00
145.72 30.46
11640.46 W
116.40
11756.86 X
1651.84
13408.70 Y
2011.30
15420.00 Z
154.20
15574.20
74.43
74.45
Rate . Amount .
25.00 25.00
80.00 80.00
2.12 5.79
714.00 71.40
182.19 W
1.82
184.01 X
25.85
209.86 Y
31.48
241.34 Z
2.41
243.76
243.75
Rate . Amount .
5500.00 1705.00
145.72 4.37
2.12 104.73
784.00 94.08
714.00 85.68
645.00 322.50
784.00 392.00
714.00 357.00
2.12 28.66
3094.02 W
30.94
3124.96 X
439.06
3564.02 Y
534.60
4098.62 Z
40.99
4139.61
12.43
12.45
Rate . Amount .
5500.00 1705.00
145.72 4.52
243.75 2437.50 A
2.12 104.73
784.00 94.08
714.00 85.68
645.00 322.50
784.00 392.00
714.00 357.00
5503.01 W
30.66
5533.66 X
435.01
5968.67 Y
529.68
6498.35 Z
40.61
6538.96
19.62
19.60
Rate . Amount .
4950.00 5197.50
145.72 15.30
714.00 535.50
645.00 322.50
714.00 714.00
645.00 645.00
2.12 41.89
7471.69 W
74.72
7546.41 X
1060.27
8606.68 Y
1291.00
9897.68 Z
98.98
9996.66
99.97
99.95
Rate . Amount .
784.00 94.08
714.00 85.68
645.00 322.50
784.00 392.00
714.00 357.00
2.12 114.10
2.12 114.10
1479.46 W
14.79
1494.25 X
209.94
1704.19 Y
255.63
1959.82 Z
19.60
1979.42
54.98
55.00
Rate . Amount .
784.00 297.92
2.12 14.33
312.25 W
3.12
315.37 X
44.31
359.68 Y
53.95
413.64 Z
4.14
417.77
8.70
8.70
Rate . Amount .
80.00 80.00
645.00 77.40
2.12 8.82
166.22 W
1.66
167.88 X
23.59
191.47 Y
28.72
220.19 Z
2.20
222.39
222.40
Rate . Amount .
7783.65 155.67 A
645.00 1.29
714.00 2.86
784.00 0.63
714.00 0.57
714.00 0.57
88.95 117.41 A
307.95 153.98 A
5000.00 9.00
145.72 0.26
900.00 34.65
163.93 6.31
645.00 1.74
714.00 0.14
2.12 0.21
2.12 0.11
749.00 19.47
645.00 24.51
714.00 32.84
2.12 1.44
2.12 1.27
645.00 77.40
2.12 8.82
651.16 W
2.24
653.41 X
31.80
685.21 Y
38.72
723.93 Z
2.97
726.90
726.90
Rate . Amount .
7783.65 778.37 A
645.00 6.45
714.00 14.28
784.00 3.14
714.00 2.86
714.00 2.86
88.95 427.85 A
307.95 335.67 A
5000.00 270.00
145.72 7.87
900.00 9.90
163.93 1.80
645.00 5.16
714.00 0.50
2.12 0.06
2.12 0.28
749.00 56.18
645.00 71.60
714.00 97.10
2.12 4.13
2.12 3.86
645.00 129.00
2.12 28.66
2257.56 W
7.16
2264.71 X
101.56
2366.27 Y
123.66
2489.93 Z
9.48
2499.41
2499.40
Rate . Amount .
7783.65 1478.89 A
645.00 12.26
714.00 27.13
784.00 6.27
714.00 5.71
714.00 5.71
88.95 812.11 A
307.95 529.67 A
5000.00 450.00
145.72 13.11
900.00 180.00
163.93 32.79
645.00 8.39
714.00 0.71
2.12 1.10
2.12 0.55
749.00 94.37
645.00 119.33
714.00 162.08
2.12 7.17
2.12 6.06
645.00 129.00
2.12 28.66
4111.09 W
12.90
4123.99 X
183.11
4307.10 Y
222.96
4530.07 Z
17.09
4547.16
4547.15
Rate . Amount .
7783.65 467.02 A
645.00 3.87
714.00 8.57
784.00 1.88
714.00 1.71
714.00 1.71
88.95 256.18 A
307.95 249.44 A
5000.00 210.00
145.72 6.12
900.00 8.10
163.93 1.48
645.00 3.87
714.00 0.43
2.12 0.55
2.12 0.28
749.00 43.44
645.00 55.47
714.00 74.97
2.12 3.31
2.12 2.76
645.00 64.50
2.12 28.66
1494.31 W
5.22
1499.53 X
74.03
1573.55 Y
90.14
1663.69 Z
6.91
1670.60
1670.60
Rate . Amount .
25614.00 5763.15
163.93 36.88
1200.00 1980.00
163.93 270.48
440.00 198.00
187.35 8.43
714.00 78.54
645.00 903.00
645.00 903.00
784.00 62.72
714.00 78.54
645.00 599.85
714.00 78.54
645.00 599.85
645.00 999.75
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 96.00
350.00 38.50
20.00 2.20
20.00 6.40
2.12 14.33
2.12 14.33
13315.19 W
133.15
13448.34 X
1889.49
15337.84 Y
2300.68
17638.51 Z
176.39
17814.90
178.15
178.15
Rate . Amount .
25614.00 4610.52
163.93 29.51
1200.00 1800.00
163.93 245.90
440.00 158.40
187.35 6.74
714.00 78.54
645.00 903.00
645.00 903.00
784.00 62.72
714.00 78.54
645.00 890.10
714.00 192.78
645.00 548.25
645.00 548.25
645.00 70.95
714.00 78.54
3000.00 330.00
800.00 96.00
350.00 38.50
20.00 2.20
20.00 6.40
2.12 14.33
2.12 34.73
25614.00 2817.54
1200.00 1200.00
163.93 18.03
163.93 163.93
440.00 96.80
187.35 4.12
714.00 42.84
645.00 625.65
784.00 39.20
714.00 49.98
645.00 483.75
714.00 49.98
645.00 399.90
645.00 399.90
645.00 96.75
714.00 42.84
3000.00 180.00
350.00 24.50
800.00 48.00
20.00 0.60
20.00 1.80
2.12 20.12
18534.13 W
185.34
18719.47 X
2630.09
21349.55 Y
3202.43
24551.99 Z
245.52
24797.51
247.98
248.00
Rate . Amount .
25614.00 4994.73
1200.00 1800.00
163.93 31.97
163.93 245.90
440.00 171.60
187.35 7.31
714.00 42.84
645.00 316.05
645.00 625.65
784.00 39.20
714.00 42.84
645.00 445.05
714.00 471.24
645.00 328.95
645.00 328.95
645.00 96.75
714.00 42.84
3000.00 180.00
350.00 21.00
800.00 48.00
20.00 1.00
20.00 2.40
2.12 5.79
2.12 11.30
10301.35 W
103.01
10404.36 X
1461.81
11866.17 Y
1779.93
13646.10 Z
136.46
13782.56
137.83
137.85
Rate . Amount .
30800.00 6006.00
163.93 31.97
1200.00 1800.00
163.93 245.90
714.00 78.54
645.00 903.00
645.00 903.00
784.00 54.88
714.00 71.40
645.00 645.00
714.00 78.54
645.00 548.25
645.00 548.25
645.00 174.15
714.00 192.78
3000.00 330.00
350.00 35.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
12689.70 W
126.90
12816.60 X
1800.73
14617.33 Y
2192.60
16809.93 Z
168.10
16978.03
169.78
169.80
Rate . Amount .
30800.00 3757.60
163.93 20.00
1200.00 1320.00
163.93 180.32
714.00 42.84
645.00 316.05
645.00 625.65
784.00 39.20
714.00 42.84
645.00 406.35
714.00 49.98
645.00 399.90
645.00 399.90
645.00 96.75
714.00 107.10
3000.00 180.00
350.00 21.00
20.00 2.20
20.00 6.40
2.12 5.79
2.12 11.30
8031.17 W
80.31
8111.48 X
1139.66
9251.14 Y
1387.67
10638.82 Z
106.39
10745.20
107.45
107.45
Rate . Amount .
24500.00 1837.50
163.93 12.29
440.00 66.00
187.35 2.81
20.00 1.00
20.00 2.40
2.12 16.54
350.00 10.50
2.12 19.29
714.00 42.84
645.00 941.70
645.00 122.55
645.00 303.15
3378.57 W
33.79
3412.36 X
479.44
3891.80 Y
583.77
4475.56 Z
44.76
4520.32
45.20
45.20
Rate . Amount .
24500.00 1225.00
163.93 8.20
440.00 44.00
187.35 1.87
20.00 1.00
20.00 2.40
2.12 16.54
350.00 10.50
2.12 16.54
714.00 42.84
645.00 941.70
645.00 122.55
645.00 303.15
2736.28 W
27.36
2763.64 X
388.29
3151.94 Y
472.79
3624.73 Z
36.25
3660.97
36.61
36.60
Rate . Amount .
18250.00 25550.00
163.93 229.50
450.00 1260.00
200.00 560.00
700.00 1400.00
714.00 57.12
645.00 1290.00
30346.62 W
303.47
30650.09 X
4306.34
34956.43 Y
5243.46
40199.89 Z
402.00
40601.89
11.60
11.60
Rate . Amount .
18250.00 15968.75
163.93 143.44
450.00 1260.00
200.00 560.00
700.00 1400.00
714.00 57.12
645.00 1290.00
20679.31 W
206.79
20886.10 X
2934.50
23820.60 Y
3573.09
27393.69 Z
273.94
27667.63
7.91
7.90
Rate . Amount .
27100.00 37940.00
163.93 229.50
450.00 1260.00
200.00 560.00
700.00 1400.00
714.00 57.12
645.00 1290.00
42736.62 W
427.37
43163.99 X
6064.54
49228.53 Y
7384.28
56612.81 Z
566.13
57178.94
16.34
16.35
Rate . Amount .
27100.00 23712.50
163.93 143.44
450.00 1260.00
200.00 560.00
700.00 1400.00
714.00 57.12
645.00 1290.00
28423.06 W
284.23
28707.29 X
4033.37
32740.66 Y
4911.10
37651.76 Z
376.52
38028.28
10.87
10.85
Rate . Amount .
24500.00 3528.00
163.93 23.61
30.00 302.40
16.39 1.64
1200.00 2160.00
1200.00 1080.00
163.93 442.61
440.00 126.72
187.35 5.40
714.00 57.12
645.00 903.00
645.00 903.00
645.00 367.65
784.00 148.96
645.00 3225.00
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 104.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
14144.84 W
141.45
14286.29 X
2007.22
16293.51 Y
2444.03
18737.54 Z
187.38
18924.92
189.25
189.25
Rate . Amount .
38150.00 5493.60
163.93 23.61
1200.00 2160.00
1200.00 1080.00
163.93 442.61
440.00 126.72
187.35 5.40
714.00 57.12
645.00 903.00
645.00 903.00
645.00 367.65
784.00 148.96
645.00 3225.00
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 104.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
15806.40 W
158.06
15964.47 X
2243.01
18207.47 Y
2731.12
20938.60 Z
209.39
21147.98
211.48
211.50
Rate . Amount .
28000.00 4032.00
163.93 23.61
30.00 302.40
16.39 1.64
1200.00 2160.00
1200.00 1080.00
163.93 442.61
440.00 126.72
187.35 5.40
714.00 57.12
645.00 903.00
645.00 903.00
645.00 367.65
784.00 148.96
645.00 3225.00
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 104.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
14648.84 W
146.49
14795.33 X
2078.74
16874.07 Y
2531.11
19405.18 Z
194.05
19599.24
195.99
196.00
Rate . Amount .
24500.00 4410.00
30.00 378.00
163.93 29.51
16.39 2.07
1200.00 2700.00
1200.00 1344.00
163.93 552.44
440.00 158.40
187.35 6.74
714.00 57.12
645.00 903.00
645.00 903.00
645.00 457.95
784.00 148.96
645.00 4031.25
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 120.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
16968.18 W
169.68
17137.86 X
2407.87
19545.73 Y
2931.86
22477.59 Z
224.78
22702.37
227.02
227.00
Rate . Amount .
ominal size size
38150.00 6867.00
163.93 29.51
1200.00 2700.00
1200.00 1344.00
163.93 552.44
440.00 158.40
187.35 6.74
714.00 57.12
645.00 903.00
645.00 903.00
645.00 457.95
784.00 148.96
645.00 4031.25
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 120.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
19045.12 W
190.45
19235.57 X
2702.60
21938.16 Y
3290.72
25228.89 Z
252.29
25481.18
254.81
254.80
Rate . Amount .
28000.00 5040.00
30.00 378.00
163.93 29.51
16.39 2.07
1200.00 2700.00
1200.00 1344.00
163.93 552.44
440.00 158.40
187.35 6.74
714.00 57.12
645.00 903.00
645.00 903.00
645.00 457.95
784.00 148.96
645.00 4031.25
645.00 174.15
714.00 78.54
3000.00 330.00
800.00 120.00
3500.00 140.00
20.00 2.20
20.00 6.40
2.12 14.33
2.12 20.12
17598.18 W
175.98
17774.16 X
2497.27
20271.43 Y
3040.71
23312.15 Z
233.12
23545.27
235.45
235.45
Rate . Amount .
27100.00 6233.00
163.93 37.70
1200.00 2880.00
163.93 393.43
784.00 148.96
645.00 2283.30
645.00 174.15
714.00 78.54
3000.00 330.00
3500.00 140.00
2.12 20.12
12719.20 W
127.19
12846.40 X
1804.92
14651.32 Y
2197.70
16849.01 Z
168.49
17017.50
170.18
170.20
Rate . Amount .
27100.00 7804.80
163.93 47.21
1200.00 3600.00
163.93 491.79
784.00 148.96
645.00 2644.50
645.00 174.15
714.00 78.54
3000.00 330.00
2.12 20.12
15340.07 W
153.40
15493.47 X
2176.83
17670.30 Y
2650.55
20320.85 Z
203.21
20524.06
205.24
205.25
Rate . Amount .
1300.00 12987.00
1400.00 13678.00
1350.00 2403.00
1100.00 660.00
1400.00 3262.00
1350.00 3591.00
1100.00 616.00
178.19 1780.12
163.93 1983.55
163.93 727.85
163.93 190.16
24500.00 45325.00
163.93 303.27
645.00 10752.15
645.00 3437.85
645.00 1722.15
645.00 857.85
714.00 478.38
645.00 857.85
645.00 4302.15
645.00 432.15
714.00 1263.78
800.00 360.00
3000.00 1830.00
2.12 744.12
114545.38 W
1145.45
115690.83 X
16254.56
131945.40 Y
19791.81
151737.20 Z
1517.37
153254.58
414.20
414.20
Rate . Amount .
178.19 1443.34
1000.00 8100.00
1400.00 20412.00
1350.00 5832.00
1350.00 2767.50
1350.00 3469.50
1350.00 1093.50
24500.00 49980.00
163.93 3988.42
163.93 334.42
645.00 16125.00
645.00 5160.00
645.00 2580.00
645.00 1290.00
714.00 714.00
645.00 1290.00
645.00 6450.00
645.00 645.00
714.00 1892.10
800.00 400.00
3000.00 2250.00
2.12 909.48
137126.25 W
1371.26
138497.52 X
19458.90
157956.42 Y
23693.46
181649.88 Z
1816.50
183466.38
611.55
611.55
Rate . Amount .
34790.00 3548.58
163.93 16.72
1400.00 28.00
1350.00 272.70
1100.00 91.30
1130.00 196.62
1350.00 12.15
34790.00 10.44
163.93 0.05
163.93 37.87
163.93 13.61
163.93 28.52
714.00 1071.00
784.00 392.00
714.00 2499.00
714.00 178.50
714.00 357.00
750.00 375.00
2.12 324.93
9453.99 W
94.54
9548.53 X
1341.57
10890.10 Y
1633.51
12523.61 Z
125.24
12648.85
726.95
726.95
Rate . Amount .
34790.00 3548.58
163.93 16.72
1400.00 28.00
1350.00 272.70
1100.00 91.30
1130.00 196.62
1350.00 12.15
34790.00 10.44
163.93 0.05
163.93 37.87
163.93 13.61
163.93 28.52
714.00 1071.00
784.00 392.00
714.00 2499.00
714.00 178.50
714.00 357.00
750.00 375.00
2.12 324.93
9453.99 W
94.54
9548.53 X
1341.57
10890.10 Y
1633.51
12523.61 Z
125.24
12648.85
1163.11
1163.10
Rate . Amount .
24500.00 7423.50
30.00 636.30
163.93 49.67
16.39 3.47
1200.00 1188.00
1200.00 792.00
163.93 270.48
440.00 266.64
187.35 11.35
1500.00 2475.00
163.93 270.48
714.00 114.24
645.00 903.00
645.00 903.00
645.00 767.55
784.00 188.16
645.00 3947.40
645.00 219.30
714.00 92.82
3000.00 390.00
800.00 168.00
3500.00 175.00
20.00 2.60
20.00 8.00
2.12 15.16
2.12 19.02
21300.15 W
213.00
21513.15 X
3022.60
24535.75 Y
3680.36
28216.11 Z
282.16
28498.28
284.98
285.00
Rate . Amount .
38150.00 11559.45
163.93 49.67
1200.00 1188.00
1200.00 792.00
163.93 270.48
440.00 266.64
187.35 11.35
1500.00 2475.00
163.93 270.48
714.00 114.24
645.00 903.00
645.00 903.00
645.00 767.55
784.00 188.16
645.00 3947.40
645.00 219.30
714.00 92.82
3000.00 390.00
800.00 168.00
3500.00 175.00
20.00 2.60
20.00 8.00
2.12 15.16
2.12 19.02
24796.33 W
247.96
25044.29 X
3518.72
28563.01 Y
4284.45
32847.47 Z
328.47
33175.94
331.76
331.75
Rate . Amount .
28000.00 8484.00
30.00 636.30
163.93 49.67
16.39 3.47
1200.00 1188.00
1200.00 792.00
163.93 270.48
440.00 266.64
187.35 11.35
1500.00 2475.00
163.93 270.48
714.00 114.24
645.00 903.00
645.00 903.00
645.00 767.55
784.00 188.16
645.00 3947.40
645.00 219.30
714.00 92.82
3000.00 390.00
800.00 168.00
3500.00 175.00
20.00 2.60
20.00 8.00
2.12 15.16
2.12 19.02
22360.65 W
223.61
22584.26 X
3173.09
25757.35 Y
3863.60
29620.95 Z
296.21
29917.16
299.17
299.15
Rate . Amount .
24500.00 11735.50
30.00 1005.90
16.39 5.49
163.93 78.52
1200.00 1872.00
1200.00 1248.00
163.93 426.22
1500.00 3900.00
163.93 426.22
440.00 421.52
187.35 17.95
714.00 114.24
645.00 903.00
645.00 903.00
645.00 1212.60
784.00 243.04
645.00 6101.70
645.00 290.25
714.00 128.52
3000.00 540.00
800.00 240.00
3500.00 105.00
20.00 1.80
20.00 5.40
2.12 11.30
2.12 34.17
31971.34 W
319.71
32291.05 X
4536.89
36827.95 Y
5524.19
42352.14 Z
423.52
42775.66
427.76
427.75
Rate . Amount .
38150.00 18273.85
163.93 78.52
1200.00 1872.00
1200.00 1248.00
163.93 426.22
1500.00 3900.00
163.93 426.22
440.00 421.52
187.35 17.95
714.00 114.24
645.00 903.00
645.00 903.00
645.00 1212.60
784.00 243.04
645.00 6101.70
645.00 290.25
714.00 128.52
3000.00 540.00
800.00 240.00
3500.00 105.00
20.00 1.80
20.00 5.40
2.12 11.30
2.12 34.17
37498.30 W
374.98
37873.28 X
5321.20
43194.48 Y
6479.17
49673.65 Z
496.74
50170.39
501.70
501.70
Rate . Amount .
28000.00 13412.00
30.00 1005.90
16.39 5.49
163.93 78.52
1200.00 1872.00
1200.00 1248.00
163.93 426.22
1500.00 3900.00
163.93 426.22
440.00 421.52
187.35 17.95
714.00 114.24
645.00 903.00
645.00 903.00
645.00 1212.60
784.00 243.04
645.00 6101.70
645.00 290.25
714.00 128.52
3000.00 540.00
800.00 240.00
3500.00 105.00
20.00 1.80
20.00 5.40
2.12 11.30
2.12 34.17
33647.84 W
336.48
33984.32 X
4774.80
38759.12 Y
5813.87
44572.98 Z
445.73
45018.71
450.19
450.20
Rate . Amount .
24500.00 1881.60
163.93 12.59
1500.00 900.00
163.93 98.36
440.00 675.84
187.35 28.78
714.00 42.84
645.00 316.05
645.00 625.65
645.00 193.50
645.00 715.95
784.00 39.20
645.00 96.75
714.00 42.84
3000.00 180.00
800.00 40.00
3500.00 35.00
20.00 1.00
20.00 2.40
2.12 38.58
5966.93 W
59.67
6026.60 X
846.74
6873.34 Y
1031.00
7904.34 Z
79.04
7983.38
79.83
79.85
Rate . Amount .
24500.00 2401.00
163.93 16.07
1400.00 1260.00
163.93 147.54
440.00 862.40
187.35 36.72
784.00 31.36
714.00 42.84
645.00 445.05
714.00 78.54
645.00 903.00
645.00 903.00
714.00 35.70
645.00 328.95
645.00 96.75
714.00 42.84
3000.00 180.00
350.00 21.00
800.00 48.00
20.00 1.00
20.00 2.40
2.12 38.58
2.12 5.79
7928.52 W
79.29
8007.81 X
1125.10
9132.91 Y
1369.94
10502.84 Z
105.03
10607.87
106.08
106.10
Rate . Amount .
1300.00 676.00
1400.00 308.00
1350.00 148.50
178.19 92.66
163.93 54.10
1500.00 667.50
163.93 72.95
5000.00 1600.00
145.72 46.63
749.00 74.90
645.00 1051.35
714.00 499.80
800.00 61.60
350.00 24.50
2.12 55.12
307.95 125.34
2.12 3.03
5561.97 W
54.37
5616.34 X
771.49
6387.82 Y
939.37
7327.20 Z
72.02
7399.22
7399.20
Rate . Amount .
5000.00 1700.00
145.72 49.54
1300.00 676.00
1350.00 297.00
1350.00 148.50
1500.00 667.50
178.19 92.66
163.93 54.10
163.93 72.95
645.00 1290.00
714.00 192.78
784.00 39.20
714.00 35.70
714.00 28.56
749.00 52.43
645.00 45.15
400.00 400.00
210.00 210.00
250.00 6.25
300.00 15.00
915.85 915.85
2.12 106.00
7095.17 W
70.95
7166.12 X
1006.84
8172.96 Y
1225.94
9398.91 Z
93.99
9492.89
9492.90
Rate . Amount .
5000.00 1700.00
145.72 49.54
1300.00 676.00
1400.00 308.00
1350.00 148.50
1500.00 667.50
178.19 92.66
163.93 54.10
163.93 72.95
645.00 1290.00
714.00 192.78
784.00 39.20
714.00 35.70
714.00 28.56
749.00 52.43
645.00 45.15
400.00 400.00
37.30 373.00
210.00 210.00
250.00 6.25
300.00 15.00
915.85 915.85
2.12 106.00
7479.17 W
74.79
7553.96 X
1061.33
8615.29 Y
1292.29
9907.59 Z
99.08
10006.66
10006.65
Rate . Amount .
47.00 36.66
2.12 1.93
29.00 280.72
2.12 1.93
440.00 6.60
2.12 1.93
784.00 2352.00
714.00 71.40
714.00 178.50
645.00 438.60
3370.27
3370.27
396.50
396.50
Rate . Amount .
4950.00 201.52
145.72 0.59
714.00 2042.04
645.00 1844.70
645.00 3695.85
7784.70
7784.70
915.85
915.85
Rate . Amount .
36.00 36.00
36.00 W
0.36
36.36 X
5.11
41.47 Y
6.22
47.69 Z
0.48
48.17
48.15
Rate . Amount .
360.00 16200.00
163.93 34.43
714.00 714.00
645.00 1935.00
2.12 57.05
18940.48 W
189.40
19129.88 X
2687.75
21817.63 Y
3272.64
25090.27 Z
250.90
25341.17
3.13
3.15
Rate . Amount .
29.00 892.04
163.93 4.92
714.00 714.00
645.00 1612.50
2.12 43.82
3267.28 W
32.67
3299.95 X
463.64
3763.59 Y
564.54
4328.13 Z
43.28
4371.41
3.64
3.65
Rate . Amount .
130.00 362.70
2.12 10.75
714.00 385.56
645.00 348.30
2.12 77.17
1184.48 W
11.84
1196.32 X
168.08
1364.40 Y
204.66
1569.06 Z
15.69
1584.75
158.48
158.50
Rate . Amount .
130.00 215.80
2.12 2.37
714.00 257.04
645.00 232.20
2.12 51.81
759.22 W
7.59
766.81 X
107.74
874.55 Y
131.18
1005.73 Z
10.06
1015.79
101.58
101.60
Rate . Amount .
115.00 170.20
2.12 5.62
714.00 71.40
714.00 385.56
645.00 1083.60
2.12 77.17
1793.55 W
17.94
1811.49 X
254.51
2066.00 Y
309.90
2375.90 Z
23.76
2399.66
239.97
239.95
Rate . Amount .
115.00 102.35
2.12 1.38
714.00 42.84
714.00 257.04
645.00 722.40
2.12 51.81
1177.82 W
11.78
1189.60 X
167.14
1356.74 Y
203.51
1560.25 Z
15.60
1575.85
157.59
157.60
Rate . Amount .
286.85 269.64 A
6326.05 948.91 A
6833.40 13325.13 A
10719.30 2679.83 A
88.95 2223.75 A
307.95 4055.70 A
253.05 1644.83 A
67.80 326.12 A
5000.00 120.00
145.72 3.50
900.00 45.00
163.93 8.20
645.00 22.58
714.00 2.14
2.12 2.69
2.12 2.69
749.00 247.17
645.00 314.76
714.00 428.40
2.12 18.47
2.12 16.15
26705.66 W
12.32
26717.98 X
174.79
26892.77 Y
212.83
27105.60 Z
16.32
27121.92
2712.19
2712.20
Rate Amount
80.00 1200.00
2.12 5.51
714.00 357.00
645.00 322.50
2.12 82.68
1967.69 W
19.68
1987.37 X
279.23
2266.59 Y
339.99
2606.58 Z
26.07
2632.65
175.51
175.50
Rate Amount
290.00 118.90
163.93 11.15
11.00 3.05
163.93 45.41
645.00 74.82
645.00 74.82
40.00 26.20
204.92 134.22
645.00 16.13
645.00 16.13
645.00 0.52
3000.00 2.40
2.12 0.38
645.00 167.70
645.00 167.70
714.00 128.52
988.03 W
9.88
997.91 X
140.21
1138.12 Y
170.72
1308.84 Z
13.09
1321.93
1321.95
Rate Amount
3727.10 3261.21
645.00 464.40
645.00 387.00
1300.00 130.00
163.93 16.39
645.00 5.74
645.00 6.90
714.00 2.50
5024.15 488.35
749.00 589.46
645.00 507.62
714.00 187.07
2.12 25.91
1300.00 6.50
163.93 0.82
784.00 705.60
645.00 1277.10
714.00 35.70
8098.27 W
80.98
8179.25 X
1149.18
9328.43 Y
1399.26
10727.70 Z
107.28
10834.97
12038.86
12038.85
Rate Amount
300.00 456.00
11.00 5.28
1500.00 1080.00
163.93 39.34
163.93 78.69
163.93 118.03
645.00 580.50
714.00 321.30
2.12 57.05
2.12 28.66
2764.85
2764.85
2764.85
Rate Amount
2764.85 1105.94
1400.00 896.00
1350.00 283.50
163.93 139.34
645.00 419.25
645.00 387.00
714.00 192.78
784.00 39.20
714.00 35.70
714.00 28.56
2.12 57.05
2.12 28.66
2.12 114.10
3727.08
3727.08
3727.10
Rate Amount
600.00 3000.00
7.00 1890.00
42.00 420.00
2.12 104.73
645.00 645.00
784.00 392.00
714.00 357.00
6808.73 W
68.09
6876.82 X
966.19
7843.01 Y
1176.45
9019.46 Z
90.19
9109.65
303.66
303.65
Rate Amount
38150.00 858375.00
163.93 3688.43
1350.00 57712.50
1350.00 57712.50
1350.00 53865.00
1400.00 55860.00
1400.00 159600.00
163.93 45785.65
290.00 24795.00
163.93 1086.86
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1459405.69 W
14594.06
1473999.75 X
207096.96
1681096.71 Y
252164.51
1933261.22 Z
19332.61
1952593.83
10013.30
10013.30
Rate Amount
38150.00 858375.00
163.93 3688.43
1350.00 57712.50
1350.00 57712.50
1350.00 53865.00
1400.00 55860.00
1400.00 159600.00
163.93 45785.65
290.00 24795.00
163.93 1086.86
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1447405.69 W
14474.06
1461879.75 X
205394.10
1667273.85 Y
250091.08
1917364.93 Z
19173.65
1936538.58
9930.97
9930.95
Rate Amount
38150.00 600862.50
163.93 2581.90
1350.00 78165.00
1350.00 78165.00
1350.00 78165.00
1400.00 81060.00
1400.00 81060.00
163.93 47457.74
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1188441.89 W
11884.42
1200326.31 X
168645.85
1368972.16 Y
205345.82
1574317.98 Z
15743.18
1590061.16
7756.40
7756.40
Rate Amount
38150.00 600862.50
163.93 2581.90
1350.00 78165.00
1350.00 78165.00
1350.00 78165.00
1400.00 81060.00
1400.00 81060.00
163.93 47457.74
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1176441.89 W
11764.42
1188206.31 X
166942.99
1355149.30 Y
203272.39
1558421.69 Z
15584.22
1574005.91
7678.08
7678.10
Rate Amount
38150.00 858375.00
163.93 3688.43
1350.00 109653.75
1350.00 109653.75
1400.00 163590.00
163.93 45785.65
290.00 24795.00
163.93 1086.86
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
1453983.19 W
14539.83
1468523.02 X
206327.48
1674850.51 Y
251227.58
1926078.08 Z
19260.78
1945338.86
249.40
249.40
Rate Amount
38150.00 858375.00
163.93 3688.43
1350.00 109653.75
1350.00 109653.75
1400.00 163590.00
163.93 45785.65
290.00 24795.00
163.93 1086.86
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
1441983.19 W
14419.83
1456403.02 X
204624.62
1661027.65 Y
249154.15
1910181.79 Z
19101.82
1929283.61
247.34
247.35
Rate Amount
38150.00 944212.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1551876.05 W
15518.76
1567394.81 X
220218.97
1787613.78 Y
268142.07
2055755.84 Z
20557.56
2076313.40
10870.75
10870.75
Rate Amount
38150.00 944212.50
163.93 4057.27
38100.00 75438.00
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1627314.05 W
16273.14
1643587.19 X
230924.00
1874511.19 Y
281176.68
2155687.86 Z
21556.88
2177244.74
11399.19
11399.20
Rate Amount
32950.00 815512.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1423176.05 W
14231.76
1437407.81 X
201955.80
1639363.60 Y
245904.54
1885268.14 Z
18852.68
1904120.82
9969.22
9969.20
Rate Amount
29150.00 721462.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
15000.00 45000.00
13000.00 39000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1329126.05 W
13291.26
1342417.31 X
188609.63
1531026.94 Y
229654.04
1760680.98 Z
17606.81
1778287.79
9310.41
9310.40
Rate Amount
38150.00 944212.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1539876.05 W
15398.76
1555274.81 X
218516.11
1773790.92 Y
266068.64
2039859.55 Z
20398.60
2060258.15
10786.69
10786.70
Rate Amount
38150.00 944212.50
163.93 4057.27
38100.00 75438.00
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1615314.05 W
16153.14
1631467.19 X
229221.14
1860688.33 Y
279103.25
2139791.57 Z
21397.92
2161189.49
11315.13
11315.15
Rate Amount
32950.00 815512.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1411176.05 W
14111.76
1425287.81 X
200252.94
1625540.74 Y
243831.11
1869371.85 Z
18693.72
1888065.57
9885.16
9885.15
Rate Amount
29150.00 721462.50
163.93 4057.27
1350.00 57408.75
1350.00 57408.75
1350.00 47844.00
1400.00 49616.00
1400.00 166698.00
163.93 45080.75
290.00 37004.00
163.93 1621.27
12000.00 72000.00
1500.00 9000.00
400.00 2400.00
1300.00 7800.00
3.30 14850.00
1485.00
300.00 1170.00
600.00 2340.00
1200.00 4680.00
714.00 599.76
645.00 9030.00
714.00 3570.00
1317126.05 W
13171.26
1330297.31 X
186906.77
1517204.08 Y
227580.61
1744784.69 Z
17447.85
1762232.54
9226.35
9226.35
Rate Amount
240.00 940.80
145.72 0.57
1443.00 1414.14
78.20 1694.59 A
714.00 7.14
645.00 161.25
2.12 137.80
131.45 140.65 A
201.70 128.28 A
2.12 165.36
4790.59 W
28.27
4818.86 X
401.17
5220.03 Y
488.48
5708.51 Z
37.45
5745.96
5745.95
Rate Amount
240.00 523.20
145.72 0.32
1443.00 793.65
78.20 1646.11 A
714.00 7.14
645.00 161.25
2.12 137.80
131.45 136.18 A
201.70 70.60 A
2.12 137.80
3614.04 W
17.61
3631.66 X
249.92
3881.57 Y
304.30
4185.88 Z
23.33
4209.21
4209.20
Rate Amount
240.00 5080.80
145.72 3.08
1443.00 7272.72
180.00 61.20
2.12 110.24
2.12 826.80
2.12 1196.10
201.70 726.12 A
15277.07 W
145.51
15422.58 X
2064.85
17487.43 Y
2514.20
20001.63 Z
192.76
20194.38
5609.55
5609.55
Rate Amount
240.00 955.20
1443.00 1414.14
78.20 2327.23 A
714.00 7.14
645.00 161.25
2.12 148.89
131.45 143.28 A
201.70 128.08 A
2.12 66.14
5351.35 W
27.53
5378.88 X
390.63
5769.51 Y
475.64
6245.15 Z
36.47
6281.62
6281.60
Rate Amount
66.00 69300.00
72.00 3600.00
800.00 800.00
1400.00 1400.00
84.00 11928.00
784.00 784.00
714.00 2856.00
645.00 2580.00
93248.00 W
932.48
94180.48 X
13232.36
107412.84 Y
16111.93
123524.76 Z
1235.25
124760.01
623.80
623.80
Rate Amount
650.00 650.00
178.19 178.19
1300.00 104.00
163.93 13.11
645.00 225.75
645.00 167.70
714.00 128.52
6670.25 3335.13 A
4802.40 W
14.67
4817.07 X
208.21
5025.29 Y
253.52
5278.81 Z
19.44
5298.25
529.82
529.80
Rate Amount
650.00 650.00
178.19 178.19
1300.00 104.00
163.93 13.11
645.00 225.75
645.00 167.70
714.00 128.52
1467.27 W
14.67
1481.95 X
208.21
1690.16 Y
253.52
1943.68 Z
19.44
1963.12
196.31
196.30
Rate Amount
336.00 336.00
2.12 165.36
2.12 82.68
584.04 W
5.84
589.88 X
82.88
672.76 Y
100.91
773.67 Z
7.74
781.41
781.40
Rate Amount
286.85 860.55 A
2.12 28.66
889.21 W
0.29
889.50 X
4.07
893.57 Y
4.95
898.52 Z
0.38
898.90
29.96
29.95
Rate Amount
145.00 6960.00
2.12 110.24
3995.00 998.75
749.00 823.90
714.00 785.40
645.00 354.75
714.00 192.78
2.12 22.87
10248.69 W
102.49
10351.18 X
1454.34
11805.52 Y
1770.83
13576.35 Z
135.76
13712.11
1371.21
1371.20
Rate Amount
440.00 4400.00
1500.00 750.00
163.93 81.97
900.00 135.00
163.93 24.59
784.00 392.00
714.00 357.00
645.00 645.00
645.00 322.50
7108.05 W
71.08
7179.14 X
1008.67
8187.80 Y
1228.17
9415.97 Z
94.16
9510.13
951.01
951.00
Rate Amount
5600.00 41496.00
5024.15 366.76
784.00 1960.00
714.00 1785.00
645.00 1612.50
645.00 1064.25
48284.51 W
482.85
48767.36 X
6851.81
55619.17 Y
8342.88
63962.05 Z
639.62
64601.67
8613.56
8613.55
Rate Amount
300.00 3150.00
2.12 330.72
714.00 1527.96
645.00 1044.90
2.12 370.47
6424.05 W
64.24
6488.29 X
911.60
7399.90 Y
1109.98
8509.88 Z
85.10
8594.98
859.50
859.50
Rate Amount
330.00 3465.00
2.12 330.72
714.00 1527.96
645.00 1044.90
2.12 370.47
6739.05 W
67.39
6806.44 X
956.30
7762.75 Y
1164.41
8927.16 Z
89.27
9016.43
901.64
901.65
Rate Amount
380.00 3990.00
2.12 330.72
714.00 1527.96
645.00 1044.90
2.12 370.47
7264.05 W
72.64
7336.69 X
1030.81
8367.50 Y
1255.12
9622.62 Z
96.23
9718.85
971.88
971.90
Rate Amount
600.00 1350.00
192.86 433.94
1783.94 W
17.84
1801.77 X
253.15
2054.92 Y
308.24
2363.16 Z
23.63
2386.79
1060.80
1060.80
Rate Amount
784.00 846.72
714.00 771.12
645.00 1386.75
645.00 1038.45
2.12 14.33
4057.37 W
40.57
4097.94 X
575.76
4673.71 Y
701.06
5374.76 Z
53.75
5428.51
542.85
542.85
Rate Amount
500.00 3750.00
163.93 1229.48
645.00 1057.80
714.00 92.82
6130.10 W
61.30
6191.40 X
869.89
7061.29 Y
1059.19
8120.48 Z
81.20
8201.68
82.02
82.00
Rate Amount
1400.00 10500.00
163.93 1229.48
645.00 1322.25
714.00 92.82
13144.55 W
131.45
13275.99 X
1865.28
15141.27 Y
2271.19
17412.46 Z
174.12
17586.58
175.87
175.85
Rate Amount
1300.00 9750.00
178.19 1336.43
645.00 1322.25
714.00 92.82
12501.50 W
125.01
12626.51 X
1774.02
14400.53 Y
2160.08
16560.61 Z
165.61
16726.22
167.26
167.25
Rate Amount
7997.30 7997.30 A
2.12 121.26
2.12 88.19
8206.76 W
2.09
8208.85 X
29.72
8238.57 Y
36.19
8274.76 Z
2.77
8277.54
8277.55
Rate Amount
5000.00 135.00
145.72 3.93
29.00 3.92
142.85 W
1.43
144.28 X
20.27
164.55 Y
24.68
189.23 Z
1.89
191.12
191.10
Rate Amount
714.00 7.14
645.00 161.25
1200.00 12.00
6000.00 150.00
3750.00 107.81
438.20 W
4.38
442.58 X
62.18
504.77 Y
75.72
580.48 Z
5.80
586.29
5.86
5.85
Rate Amount
1000.00 72000.00
1350.00 97200.00
178.19 12829.68
163.93 11802.96
900.00 51300.00
163.93 9344.01
1400.00 60480.00
1400.00 60480.00
163.93 14163.55
950.00 5700.00
300.00 1800.00
200.00 900.00
1300.00 7800.00
3.30 14850.00
1485.00
2400.00 14400.00
600.00 3600.00
714.00 285.60
714.00 1428.00
645.00 5160.00
447008.80 W
4470.09
451478.89 X
63432.78
514911.67 Y
77236.75
592148.43 Z
5921.48
598069.91
2658.09
2658.10
Rate Amount
1350.00 68040.00
1350.00 68040.00
163.93 16524.14
900.00 64800.00
163.93 11802.96
1400.00 80640.00
1400.00 80640.00
163.93 18884.74
950.00 5700.00
300.00 1800.00
200.00 900.00
1300.00 7800.00
3.30 14850.00
1485.00
2400.00 14400.00
600.00 3600.00
714.00 285.60
714.00 1428.00
645.00 5160.00
466780.44 W
4667.80
471448.24 X
66238.48
537686.72 Y
80653.01
618339.73 Z
6183.40
624523.13
2775.66
2775.65
Rate Amount
900.00 90720.00
163.93 16524.14
900.00 32400.00
163.93 5901.48
1400.00 105840.00
1400.00 105840.00
163.93 24786.22
950.00 5700.00
300.00 1800.00
200.00 900.00
1300.00 7800.00
3.30 14850.00
1485.00
2400.00 14400.00
600.00 3600.00
714.00 285.60
714.00 1428.00
645.00 5160.00
439420.44 W
4394.20
443814.64 X
62355.96
506170.60 Y
75925.59
582096.19 Z
5820.96
587917.15
2612.97
2612.95
Rate Amount
1000.00 22275.00
1300.00 28957.50
1350.00 30071.25
1400.00 31185.00
178.19 7938.36
163.93 7303.08
1350.00 40095.00
1400.00 41580.00
900.00 53460.00
163.93 19474.88
1400.00 62370.00
1400.00 62370.00
163.93 14606.16
950.00 6270.00
300.00 1800.00
200.00 600.00
1300.00 7800.00
3.30 16335.00
1633.50
800.00 4800.00
600.00 2340.00
714.00 342.72
714.00 1428.00
645.00 6450.00
471485.46 W
4714.85
476200.32 X
66906.14
543106.46 Y
81465.97
624572.43 Z
6245.72
630818.16
2803.64
2803.65
Rate Amount
1350.00 273375.00
1350.00 273375.00
1500.00 304500.00
5000.00 337500.00
163.93 66391.65
163.93 33277.79
145.72 9836.10
1300.00 7800.00
2400.00 14400.00
400.00 2400.00
800.00 4800.00
600.00 4800.00
200.00 1600.00
3.30 32670.00
3267.00
714.00 799.68
714.00 4284.00
645.00 14190.00
1389266.22 W
13892.66
1403158.88 X
197143.82
1600302.71 Y
240045.41
1840348.11 Z
18403.48
1858751.59
4130.56
4130.55
Rate Amount
46.05 115.13 A
1452.40 3631.00 A
55.50 610.50 A
131.45 1445.95 A
5802.58 W
37.46
5840.04 X
531.59
6371.63 Y
647.28
7018.91 Z
49.62
7068.53
2827.41
2827.40
Rate Amount
4850.00 3259.20
4950.00 3549.15
4950.00 296.51
4850.00 549.99
145.72 22.73
7677.58 P
767.76
-3838.79
4606.55
115.16
46.07
46.05
Rate Amount
2.00 330.00
784.00 90.16
714.00 82.11
714.00 78.54
645.00 535.35
2.12 25.65
784.00 321.44
714.00 385.56
714.00 499.80
645.00 348.30
714.00 578.34
2.12 25.65
3300.90
330.09
3630.99
1452.40
1452.40
Rate Amount
645.00 483.75
645.00 1935.00
2.12 4.24
2422.99 W
24.23
2447.22 X
343.83
2791.05 Y
418.66
3209.71 Z
32.10
3241.81
32.42
32.40
Rate Amount
645.00 161.25
645.00 645.00
2.12 5.72
811.97 W
8.12
820.09 X
115.22
935.32 Y
140.30
1075.61 Z
10.76
1086.37
108.64
108.65
Rate Amount
1500.00 750.00
163.93 81.97
900.00 135.00
163.93 24.59
784.00 392.00
714.00 357.00
645.00 645.00
645.00 322.50
2708.05 W
27.08
2735.14 X
384.29
3119.42 Y
467.91
3587.33 Z
35.87
3623.21
362.32
362.30
Rate Amount
5024.15 366.76
784.00 1960.00
714.00 1785.00
645.00 1612.50
645.00 1064.25
6788.51 W
67.89
6856.40 X
963.32
7819.72 Y
1172.96
8992.68 Z
89.93
9082.61
90.83
90.85
Rate Amount X
Z
1800.00 945.00
4355.20 52.26
784.00 439.04
645.00 32.25
645.00 32.25
2.12 37.31
1538.11 W
15.38
1553.50 X
218.27
1771.76 Y
265.76
2037.53 Z
20.38
2057.90
4115.80
4115.80
Rate Amount
1900.00 997.50
4355.20 52.26
784.00 439.04
645.00 32.25
645.00 32.25
2.12 37.31
1590.61 W
15.91
1606.52 X
225.72
1832.24 Y
274.84
2107.07 Z
21.07
2128.14
4256.29
4256.30
Rate Amount
2100.00 1113.00
4355.20 52.26
784.00 439.04
645.00 32.25
645.00 32.25
2.12 37.31
1706.11 W
17.06
1723.17 X
242.11
1965.28 Y
294.79
2260.07 Z
22.60
2282.67
4565.34
4565.35
Rate Amount
910.00 910.00
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
1394.82 W
13.95
1408.77 X
197.93
1606.70 Y
241.00
1847.70 Z
18.48
1866.18
1866.20
Rate Amount
450.00 450.00
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
934.82 W
9.35
944.17 X
132.66
1076.82 Y
161.52
1238.35 Z
12.38
1250.73
1250.75
Rate Amount
800.00 800.00
2.12 13.23
4355.20 104.52
2.12 7.72
5000.00 16.50
784.00 156.80
645.00 129.00
2.12 57.05
1284.82 W
12.85
1297.67 X
182.32
1479.99 Y
222.00
1701.99 Z
17.02
1719.01
1719.00
Rate Amount
425.00 4250.00
1500.00 750.00
163.93 81.97
900.00 99.00
163.93 18.03
784.00 392.00
714.00 357.00
645.00 645.00
645.00 322.50
2.12 53.00
6968.50 W
69.68
7038.18 X
988.86
8027.05 Y
1204.06
9231.10 Z
92.31
9323.41
932.34
932.35
Rate Amount
485.00 4850.00
1500.00 750.00
163.93 81.97
900.00 135.00
163.93 24.59
784.00 392.00
714.00 357.00
645.00 645.00
645.00 322.50
7558.05 W
75.58
7633.64 X
1072.53
8706.16 Y
1305.92
10012.08 Z
100.12
10112.21
1011.22
1011.20
Rate Amount
9.00 7443.00
4355.20 1890.16
5000.00 100.00
714.00 771.12
645.00 161.25
645.00 1044.90
714.00 192.78
319.35 3193.50 A
14796.71 W
116.03
14912.74 X
1646.55
16559.29 Y
2004.87
18564.16 Z
153.71
18717.87
1871.79
1871.80
Rate Amount
7997.30 479.84 A
89.65 411.49 A
3.40 278.80 A
4850.00 231.35
131.45 49.95 A
67.80 40.68 A
1492.11 W
2.31
1494.42 X
32.83
1527.25 Y
39.97
1567.22 Z
3.06
1570.29
2617.15
2617.15
Rate Amount
200.00 2200.00
810.00 1620.00
178.19 356.38
714.00 71.40
714.00 357.00
645.00 967.50
5572.28
55.72
5628.00 W
790.73
6418.74 X
962.81
7381.55 Y
73.82
7455.36 Z
3727.68
3727.70
Rate Amount
250.00 2750.00
810.00 1620.00
714.00 71.40
714.00 357.00
645.00 967.50
5765.90 W
57.66
5823.56 X
818.21
6641.77 Y
996.27
7638.03 Z
76.38
7714.41
3857.21
3857.20
Rate Amount
290.00 3190.00
810.00 1620.00
714.00 71.40
714.00 357.00
645.00 967.50
6205.90 W
62.06
6267.96 X
880.65
7148.61 Y
1072.29
8220.90 Z
82.21
8303.11
4151.55
4151.55
Rate Amount
1290.00 1290.00
575.00 575.00
325.00 325.00
2.12 57.05
2.12 57.05
784.00 980.00
784.00 392.00
645.00 645.00
4321.10
43.21
4364.31
613.19
4977.49
746.62
5724.12
57.24
5781.36
5781.35 W
Rate Amount
Y
4500.00 4500.00 Z
575.00 575.00
325.00 325.00
2.12 57.05
2.12 57.05
784.00 980.00
784.00 392.00
645.00 645.00
7531.10
75.31
7606.41
1068.70
8675.11
1301.27
9976.38
99.76
10076.14
10076.15 W
Rate Amount Y
410.00 410.00
1025.00 1025.00
575.00 575.00
2.12 57.05
2.12 57.05
784.00 980.00
784.00 392.00
645.00 645.00
4141.10
41.41
4182.51
587.64
4770.15
715.52
5485.67
54.86
5540.53
5540.55
Rate Amount W
X
325.00 325.00
1025.00 1025.00 Y
575.00 575.00
2.12 57.05 Z
2.12 57.05
784.00 980.00
784.00 392.00
645.00 645.00
4056.10
40.56
4096.66
575.58
4672.24
700.84
5373.08
53.73
5426.81
5426.80
Rate Amount
410.00 410.00 W
1025.00 1025.00
1200.00 1200.00 X
2.12 133.11
30.00 30.00 Y
2.12 28.66
2.12 34.17 Z
2.12 57.05
2.12 57.05
784.00 784.00
784.00 784.00
645.00 645.00
5188.05
51.88
5239.93
736.21
5976.14
896.42
6872.56
68.73
6941.29
6941.30
Rate Amount
325.00 325.00 W
1025.00 1025.00
1200.00 1200.00 X
2.12 133.11
30.00 30.00 Y
2.12 28.66
2.12 34.17 Z
2.12 57.05
2.12 57.05
784.00 784.00
784.00 784.00
645.00 645.00
5103.05
51.03
5154.08
724.15
5878.23
881.73
6759.96
67.60
6827.56
6827.55
Rate Amount
W
470.00 470.00 X
450.00 450.00
445.00 445.00 Y
2.12 28.66
2.12 28.66 Z
2.12 28.66
2.12 82.68
2.12 57.05
784.00 689.92
784.00 689.92
645.00 967.50
3938.06
39.38
3977.44
558.83
4536.27
680.44
5216.71
52.17
5268.87
5268.85
Rate Amount
W
470.00 940.00 X
450.00 450.00
765.00 765.00 Y
2.12 42.99
2.12 42.99 Z
2.12 42.99
2.12 82.68
2.12 57.05
784.00 1176.00
784.00 1176.00
645.00 1290.00
6065.71
60.66
6126.37
860.75
6987.12
1048.07
8035.19
80.35
8115.54
8115.55
Rate Amount
W
470.00 1410.00 X
500.00 500.00
1050.00 1050.00 Y
2.12 71.38
2.12 71.38 Z
2.12 71.38
2.12 82.68
2.12 85.44
784.00 1568.00
784.00 1568.00
645.00 1935.00
8413.26
84.13
8497.39
1193.88
9691.27
1453.69
11144.96
111.45
11256.41
11256.40
Rate Amount
W
470.00 1880.00
500.00 500.00 X
1430.00 1430.00
2.12 114.10 Y
2.12 114.10
2.12 114.10 Z
2.12 82.68
2.12 114.10
784.00 2352.00
784.00 2352.00
645.00 2580.00
11633.07
116.33
11749.40
1650.79
13400.20
2010.03
15410.22
154.10
15564.33
15564.35
Rate Amount
W
865.00 865.00 X
450.00 450.00
310.00 310.00 Y
190.00 190.00
2.12 37.21 Z
2.12 57.05
2.12 55.12
2.12 85.71
784.00 1372.00
784.00 1568.00
645.00 2580.00
7570.09
75.70
7645.79
1074.23
8720.02
1308.00
10028.02
100.28
10128.30
10128.30
Rate Amount
W
865.00 1730.00 X
450.00 450.00
425.00 425.00 Y
190.00 190.00
2.12 37.21 Z
2.12 114.10
2.12 55.12
2.12 114.10
784.00 1960.00
784.00 2352.00
645.00 3870.00
11297.52
112.98
11410.50
1603.17
13013.67
1952.05
14965.72
149.66
15115.38
15115.40
Rate Amount
W
865.00 2595.00 X
500.00 500.00
525.00 525.00 Y
225.00 225.00
2.12 37.21 Z
2.12 171.15
2.12 55.12
2.12 142.49
784.00 2352.00
784.00 2744.00
645.00 4515.00
13861.96
138.62
14000.58
1967.08
15967.66
2395.15
18362.81
183.63
18546.44
18546.45
Rate Amount
W
865.00 3460.00 X
500.00 500.00
610.00 610.00 Y
225.00 225.00
2.12 37.21 Z
2.12 228.20
2.12 82.68
2.12 171.15
784.00 2744.00
784.00 3136.00
645.00 5160.00
16354.23
163.54
16517.77
2320.75
18838.52
2825.78
21664.30
216.64
21880.94
21880.95
Rate Amount
X
1053.00 1053.00 Y
450.00 450.00
190.00 190.00 Z
2.12 37.21
2.12 57.05
2.12 55.12
2.12 57.05
784.00 1372.00
784.00 588.00
645.00 1935.00
5794.42
57.94
5852.37
822.26
6674.63
1001.19
7675.82
76.76
7752.58
7752.60
Rate Amount
X
1053.00 2106.00 Y
450.00 450.00
275.00 275.00 Z
2.12 37.21
2.12 114.10
2.12 55.12
2.12 70.28
784.00 1960.00
784.00 784.00
645.00 2580.00
8431.70
84.32
8516.02
1196.50
9712.52
1456.88
11169.40
111.69
11281.09
11281.10
Rate Amount
X
1053.00 3159.00 Y
500.00 500.00
310.00 310.00 Z
2.12 37.21
2.12 171.15
2.12 55.12
2.12 89.29
784.00 2352.00
784.00 1176.00
645.00 3225.00
11074.77
110.75
11185.52
1571.56
12757.08
1913.56
14670.64
146.71
14817.35
14817.35
Rate Amount
W
1053.00 4212.00 X
500.00 500.00
450.00 450.00 Y
2.12 37.21
2.12 228.20 Z
2.12 55.12
2.12 146.34
784.00 2744.00
784.00 1372.00
645.00 3547.50
13292.37
132.92
13425.29
1886.25
15311.54
2296.73
17608.27
176.08
17784.36
17784.35
Rate Amount
W
725.00 725.00 X
270.00 540.00
85.00 85.00 Y
88.00 88.00
2.12 34.17 Z
2.12 28.39
2.12 57.05
2.12 28.66
784.00 258.72
784.00 258.72
645.00 432.15
2535.86
25.36
2561.22
359.85
2921.07
438.16
3359.23
33.59
3392.83
3392.85
Rate Amount
W
725.00 725.00 X
270.00 270.00
85.00 85.00 Y
88.00 88.00
2.12 34.17 Z
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
2216.54
22.17
2238.71
314.54
2553.25
382.99
2936.23
29.36
2965.60
2965.60
Rate Amount
W
550.00 550.00 X
270.00 540.00
85.00 85.00 Y
88.00 88.00
2.12 34.17 Z
2.12 28.39
2.12 57.05
2.12 28.66
784.00 258.72
784.00 258.72
645.00 432.15
2360.86
23.61
2384.47
335.02
2719.49
407.92
3127.41
31.27
3158.69
3158.70
Rate Amount
550.00 550.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
2041.54
20.42
2061.96
289.71
2351.66
352.75
2704.41
27.04
2731.46
2731.45
Rate . Amount .
725.00 725.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
2216.54
22.17
2238.71
314.54
2553.25
382.99
2936.23
29.36
2965.60
2965.60
Rate . Amount .
425.00 425.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
1916.54
19.17
1935.71
271.97
2207.68
331.15
2538.83
25.39
2564.21
2564.20
Rate . Amount .
280.00 280.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
1771.54
17.72
1789.26
251.39
2040.65
306.10
2346.75
23.47
2370.21
2370.20
Rate . Amount .
1100.00 1100.00
430.00 860.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 258.72
784.00 258.72
645.00 432.15
3230.86
32.31
3263.17
458.48
3721.65
558.25
4279.89
42.80
4322.69
4322.70
Rate . Amount .
1100.00 1100.00
430.00 430.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
2751.54
27.52
2779.06
390.46
3169.52
475.43
3644.94
36.45
3681.39
3681.40
Rate . Amount .
1500.00 1500.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
2991.54
29.92
3021.46
424.51
3445.97
516.90
3962.87
39.63
4002.50
4002.50
Rate . Amount .
2000.00 2000.00
270.00 270.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 235.20
784.00 258.72
645.00 406.35
3491.54
34.92
3526.46
495.47
4021.93
603.29
4625.21
46.25
4671.47
4671.45
Rate . Amount .
550.00 550.00
1600.00 1600.00
85.00 85.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 258.72
784.00 258.72
645.00 406.35
3395.06
33.95
3429.01
481.78
3910.79
586.62
4497.41
44.97
4542.38
4542.40
Rate . Amount .
550.00 550.00
115.00 115.00
34.00 34.00
88.00 88.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 258.72
784.00 258.72
645.00 432.15
1884.86
18.85
1903.71
267.47
2171.18
325.68
2496.86
24.97
2521.83
2521.85
Rate . Amount .
950.00 950.00
2.12 85.44
2.12 85.71
1121.15
11.21
1132.36
159.10
1291.46
193.72
1485.17
14.85
1500.03
1500.05
Rate . Amount .
1300.00 1300.00
88.00 88.00
40.00 40.00
100.00 100.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
2468.67
24.69
2493.36
350.32
2843.68
426.55
3270.23
32.70
3302.93
3302.95
Rate . Amount .
3000.00 3000.00
88.00 176.00
2.12 57.32
2.12 57.05
2.12 28.66
784.00 172.48
784.00 470.40
645.00 528.90
4490.82
44.91
4535.72
637.27
5172.99
775.95
5948.94
59.49
6008.43
6008.45
Rate . Amount .
3500.00 3500.00
88.00 176.00
2.12 57.32
2.12 57.05
2.12 28.66
784.00 172.48
784.00 470.40
645.00 528.90
4990.82
49.91
5040.72
708.22
5748.95
862.34
6611.29
66.11
6677.40
6677.40
Rate . Amount .
3200.00 3200.00
88.00 176.00
2.12 57.32
2.12 57.05
2.12 28.66
784.00 172.48
784.00 470.40
645.00 528.90
4690.82
46.91
4737.72
665.65
5403.37
810.51
6213.88
62.14
6276.02
6276.00
Rate . Amount .
3000.00 3000.00
88.00 176.00
2.12 57.32
2.12 57.05
2.12 28.66
784.00 172.48
784.00 470.40
645.00 528.90
4490.82
44.91
4535.72
637.27
5172.99
775.95
5948.94
59.49
6008.43
6008.45
Rate . Amount .
2200.00 2200.00
88.00 88.00
2.12 28.66
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
3194.77
31.95
3226.72
453.35
3680.08
552.01
4232.09
42.32
4274.41
4274.40
Rate . Amount .
1500.00 1500.00
88.00 88.00
2.12 28.66
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
2494.77
24.95
2519.72
354.02
2873.74
431.06
3304.80
33.05
3337.85
3337.85
Rate . Amount .
1200.00 1200.00
88.00 88.00
2.12 28.66
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
2194.77
21.95
2216.72
311.45
2528.17
379.23
2907.40
29.07
2936.47
2936.45
Rate . Amount .
1500.00 1500.00
88.00 88.00
40.00 40.00
100.00 100.00
315.00 315.00
210.00 210.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
3193.67
31.94
3225.61
453.20
3678.81
551.82
4230.63
42.31
4272.94
4272.95
Rate . Amount .
2500.00 2500.00
88.00 88.00
40.00 40.00
100.00 100.00
315.00 315.00
210.00 210.00
2.12 34.17
2.12 28.39
2.12 57.05
2.12 28.66
784.00 172.48
784.00 258.72
645.00 361.20
4193.67
41.94
4235.61
595.10
4830.71
724.61
5555.32
55.55
5610.87
5610.85
Rate . Amount .
500.00 500.00
88.00 88.00
2.12 28.39
2.12 55.12
2.12 16.54
784.00 47.04
784.00 133.28
645.00 141.90
1010.26
10.10
1020.37
143.36
1163.73
174.56
1338.29
13.38
1351.67
1351.65
Rate . Amount .
475.00 475.00
2.12 28.39
2.12 28.66
784.00 392.00
645.00 322.50
1246.55
12.47
1259.01
176.89
1435.91
215.39
1651.29
16.51
1667.81
1667.80
Rate . Amount .
1290.00 1290.00
2.12 28.39
2.12 28.66
784.00 392.00
645.00 322.50
2061.55
20.62
2082.16
292.54
2374.71
356.21
2730.92
27.31
2758.22
2758.20
Rate . Amount .
1600.00 1600.00
1290.00 -1290.00
310.00
3.10
313.10
43.99
357.09
53.56
410.65
4.11
414.76
414.75
Rate . Amount .
1025.00 1025.00
2.12 28.39
2.12 28.66
784.00 392.00
645.00 322.50
1796.55
17.97
1814.51
254.94
2069.45
310.42
2379.87
23.80
2403.67
2403.65
Rate . Amount .
850.00 850.00
1025.00 -1025.00
1000.00 1000.00
700.00 -700.00
125.00
1.25
126.25
17.74
143.99
21.60
165.59
1.66
167.24
167.25
Rate . Amount .
200.00 200.00
2.12 23.74
223.74
2.24
225.98
31.75
257.73
38.66
296.39
2.96
299.36
299.35
Rate . Amount .
100.00 100.00
2.12 17.09
784.00 47.04
164.13
1.64
165.77
23.29
189.06
28.36
217.42
2.17
219.59
219.60
Rate . Amount .
103.00 103.00
2.12 17.09
784.00 47.04
167.13
1.67
168.80
23.72
192.51
28.88
221.39
2.21
223.61
223.60
Rate . Amount .
575.00 575.00
2.12 11.02
784.00 98.00
645.00 80.63
764.65
7.65
772.30
108.51
880.80
132.12
1012.92
10.13
1023.05
1023.05
Rate . Amount .
550.00 550.00
2.12 11.02
784.00 98.00
645.00 80.63
739.65
7.40
747.05
104.96
852.01
127.80
979.81
9.80
989.60
989.60
Rate . Amount .
700.00 700.00
2.12 28.66
784.00 392.00
645.00 322.50
1443.16
14.43
1457.59
204.79
1662.39
249.36
1911.74
19.12
1930.86
1930.85
Rate . Amount .
1150.00 1150.00
2.12 28.66
784.00 392.00
645.00 322.50
1893.16
18.93
1912.09
268.65
2180.74
327.11
2507.85
25.08
2532.93
2532.95
Rate . Amount .
410.00 410.00
2.12 28.39
438.39
4.38
442.77
62.21
504.98
75.75
580.73
5.81
586.53
586.55
Rate . Amount .
325.00 325.00
2.12 28.39
353.39
3.53
356.92
50.15
407.07
61.06
468.13
4.68
472.81
472.80
Rate . Amount .
350.00 350.00
2.12 28.39
378.39
3.78
382.17
53.69
435.87
65.38
501.25
5.01
506.26
506.25
Rate . Amount .
70.00 70.00
2.12 28.39
98.39
0.98
99.37
13.96
113.33
17.00
130.33
1.30
131.64
131.65
Rate . Amount .
620.00 620.00
2.12 42.40
662.40
6.62
669.02
94.00
763.02
114.45
877.48
8.77
886.25
886.25
Rate . Amount .
4500.00 4500.00
2.12 73.59
4573.59
45.74
4619.32
649.01
5268.34
790.25
6058.59
60.59
6119.17
6119.15
Rate . Amount .
470.00 470.00
2.12 20.12
784.00 297.92
645.00 245.10
1033.14
10.33
1043.47
146.61
1190.08
178.51
1368.59
13.69
1382.28
1382.30
Rate . Amount .
1053.00 1053.00
2.12 22.87
2.12 28.39
784.00 392.00
784.00 392.00
645.00 645.00
2533.26
25.33
2558.59
359.48
2918.08
437.71
3355.79
33.56
3389.35
3389.35
Rate . Amount .
725.00 725.00
2.12 114.10
2.12 20.12
859.22
8.59
867.81
121.93
989.74
148.46
1138.20
11.38
1149.58
1149.60
Rate . Amount .
550.00 550.00
2.12 114.10
2.12 20.12
684.22
6.84
691.06
97.09
788.15
118.22
906.38
9.06
915.44
915.45
Rate . Amount .
725.00 725.00
2.12 114.10
2.12 20.12
859.22
8.59
867.81
121.93
989.74
148.46
1138.20
11.38
1149.58
1149.60
Rate . Amount .
425.00 425.00
2.12 114.10
2.12 20.12
559.22
5.59
564.81
79.36
644.17
96.62
740.79
7.41
748.20
748.20
Rate . Amount .
280.00 280.00
2.12 114.10
2.12 20.12
414.22
4.14
418.36
58.78
477.14
71.57
548.71
5.49
554.20
554.20
Rate . Amount .
1100.00 1100.00
2.12 114.10
2.12 20.12
1234.22
12.34
1246.56
175.14
1421.70
213.26
1634.96
16.35
1651.31
1651.30
Rate . Amount .
1300.00 1300.00
2.12 85.71
2.12 22.87
1408.59
14.09
1422.67
199.89
1622.56
243.38
1865.94
18.66
1884.60
1884.60
Rate . Amount .
1500.00 1500.00
2.12 85.71
2.12 22.87
1608.59
16.09
1624.67
228.27
1852.94
277.94
2130.88
21.31
2152.19
2152.20
Rate . Amount .
2500.00 2500.00
2.12 85.71
2.12 22.87
2608.59
26.09
2634.67
370.17
3004.84
450.73
3455.57
34.56
3490.13
3490.15
Rate . Amount .
25.00 25.00
2.12 42.99
67.99
0.68
68.67
9.65
78.32
11.75
90.07
0.90
90.97
90.95
Rate . Amount .
33.00 33.00
2.12 42.99
75.99
0.76
76.75
10.78
87.54
13.13
100.67
1.01
101.67
101.65
Rate . Amount .
35.00 35.00
2.12 42.99
77.99
0.78
78.77
11.07
89.84
13.48
103.32
1.03
104.35
104.35
Rate . Amount .
35.00 35.00
2.12 42.99
77.99
0.78
78.77
11.07
89.84
13.48
103.32
1.03
104.35
104.35
Rate . Amount .
25.00 25.00
2.12 8.82
33.82
0.34
34.16
4.80
38.96
5.84
44.80
0.45
45.25
45.25
Rate . Amount .
30.00 30.00
2.12 3.86
33.86
0.34
34.20
4.80
39.00
5.85
44.85
0.45
45.30
45.30
Rate . Amount .
450.00 450.00
115.00 31.05
35.50 142.00 A
180.00 7.20
2.12 8.82
2.12 3.03
714.00 235.62
645.00 212.85
1090.57
9.49
1100.06
134.61
1234.66
163.90
1398.56
12.57
1411.13
1411.15
Rate . Amount .
400.00 400.00
115.00 25.30
22.00 44.00
180.00 3.60
2.12 3.03
2.12 8.82
714.00 235.62
645.00 212.85
933.22
9.33
942.55
132.43
1074.98
161.25
1236.23
12.36
1248.59
1248.60
Rate . Amount .
290.00 290.00
115.00 20.70
22.00 88.00
180.00 7.20
2.12 3.03
2.12 8.82
714.00 235.62
645.00 212.85
866.22
8.66
874.88
122.92
997.80
149.67
1147.47
11.47
1158.95
1158.95
Rate . Amount .
290.00 290.00
115.00 19.55
22.00 88.00
180.00 7.20
2.12 3.03
2.12 8.82
714.00 235.62
645.00 212.85
865.07
8.65
873.72
122.76
996.48
149.47
1145.95
11.46
1157.41
1157.40
Rate . Amount .
670.00 670.00
115.00 85.10
22.00 132.00
180.00 10.80
2.12 3.03
2.12 8.82
714.00 235.62
645.00 212.85
1358.22
13.58 A
1371.80
192.74
1564.54
234.68
1799.22
17.99 W
1817.21
1817.20 X
Y
Rate . Amount .
Z
300.00 300.00
22.00 44.00
290.00 11.60
2.12 8.82
714.00 178.50
645.00 161.25
704.17
7.04
711.21 A
99.93
811.14
121.67
932.81
9.33
942.13 W
942.15
X
Z
Rate Amount
280.00 280.00
35.50 71.00 A
180.00 3.60
2.12 9.09
714.00 85.68
645.00 77.40
526.77
4.56
531.33
64.68
596.01
78.75
674.76
6.04 W
680.80
680.80 X
Y
Rate Amount
Z
110.00 110.00
35.50 71.00 A
180.00 10.80
2.12 9.09
714.00 85.68
645.00 77.40
363.97
2.93
366.90
41.57
408.48
50.62
459.10
3.88
462.98 W
463.00
X
Rate Amount Z
1135.00 11917.50
2.12 171.15
2.12 114.10
784.00 329.28
714.00 149.94
645.00 535.35
13217.32
132.17
13349.49
1875.60
15225.09
2283.76
17508.86
175.09 W
17683.94
1018.07 X
1018.05
Y
Rate Amount Z
1170.00 12285.00
2.12 171.15
2.12 114.10
784.00 329.28
714.00 149.94
645.00 535.35
13584.82
135.85
13720.66
1927.75
15648.42
2347.26
17995.68
179.96
18175.64 W
1077.39
1077.40 X
Rate Amount
Z
700.00 12978.00
2.12 171.15
2.12 114.10
784.00 329.28
714.00 149.94
645.00 535.35
14277.82
142.78
14420.59
2026.09
16446.69
2467.00
18913.69
189.14
19102.83
1061.27 W
1061.25
X
Y
Rate Amount
Z
1050.00 11025.00
2.12 171.15
2.12 85.61
784.00 274.40
714.00 121.38
645.00 451.50
12129.03
121.29
12250.32
1721.17
13971.49
2095.72
16067.22
160.67
16227.89 W
931.57
931.55 X
Rate Amount
Z
1150.00 12075.00
2.12 171.15
2.12 85.61
784.00 274.40
714.00 121.38
645.00 451.50
13179.03
131.79
13310.82
1870.17
15180.99
2277.15 W
17458.14
174.58 X
17632.72
1042.12 Y
1042.10
Z
Rate Amount
570.00 10567.80
2.12 171.15
2.12 85.61
784.00 274.40
714.00 121.38
645.00 451.50
11671.83
116.72 W
11788.55
1656.29 X
13444.84
2016.73 Y
15461.57
154.62 Z
15616.19
867.57
867.55
Rate Amount
2.12 14.61
784.00 219.52
645.00 180.60
414.73
4.15
418.87
58.85
477.73
71.66
549.38
5.49
554.88
138.72
138.70
Rate Amount
2.12 17.09
784.00 258.72
645.00 212.85 W
488.66
4.89 X
493.54
69.34 Y
562.89
84.43 Z
647.32
6.47
653.79
163.45
163.45
Rate Amount
30.00 150.00
2.12 5.24
784.00 98.00
714.00 535.50
645.00 322.50
2.12 15.16
1400.00 4.62
1350.00 1.49
163.93 0.72
1500.00 3.30
163.93 0.36
5000.00 8.00
145.72 0.23
645.00 2.90
645.00 2.06
714.00 1.00
784.00 0.24
714.00 0.21
714.00 0.14
2.12 0.55
2.12 0.28
2.12 0.28 W
1152.78
11.53 X
1164.30
163.58 Y
1327.89
199.18 Z
1527.07
15.27
1542.34
308.47
308.45
Rate Amount
27.00 135.00
2.12 5.24
784.00 98.00
714.00 535.50
645.00 322.50
2.12 15.16
1400.00 4.62
1350.00 1.49
163.93 0.72
1500.00 3.30
163.93 0.36
5000.00 8.00
145.72 0.23
645.00 2.90
645.00 2.06
714.00 1.00
784.00 0.24
714.00 0.21
714.00 0.14
2.12 0.55
2.12 0.28
2.12 0.28
1137.78 W
11.38
1149.15 X
161.46
1310.61 Y
196.59
1507.20 Z
15.07
1522.27
304.45
304.45
Rate . Amount .
350.00 350.00
18.00 18.00
2.12 28.66
396.66 W
3.97
400.63 X
56.29
456.92 Y
68.54
525.46 Z
5.25
530.71
530.70
Rate . Amount .
400.00 400.00
18.00 18.00
2.12 28.66
446.66 W
4.47
451.13 X
63.38
514.51 Y
77.18
591.69 Z
5.92
597.61
597.60
Rate . Amount .
365.00 365.00
18.00 18.00
2.12 28.66
411.66 W
4.12
415.78 X
58.42
474.20 Y
71.13
545.33 Z
5.45
550.78
550.80
Rate . Amount .
290.00 290.00
16.00 16.00
2.12 22.87
328.87 W
3.29
332.16 X
46.67
378.83 Y
56.82
435.66 Z
4.36
440.01
440.00
Rate . Amount .
300.00 300.00
16.00 16.00
2.12 22.87
338.87 W
3.39
342.26 X
48.09
390.35 Y
58.55
448.90 Z
4.49
453.39
453.40
Rate . Amount .
290.00 290.00
16.00 16.00
2.12 22.87
328.87 W
3.29
332.16 X
46.67
378.83 Y
56.82
435.66 Z
4.36
440.01
440.00
Rate . Amount .
280.00 280.00
2.12 28.66
308.66 W
3.09
311.75 X
43.80
355.55 Y
53.33
408.88 Z
4.09
412.97
412.95
Rate . Amount .
300.00 300.00
2.12 28.66
328.66 W
3.29
331.95 X
46.64
378.59 Y
56.79
435.38 Z
4.35
439.73
439.75
Rate . Amount .
230.00 230.00
2.12 28.66
258.66 W
2.59
261.25 X
36.71
297.95 Y
44.69
342.65 Z
3.43
346.07
346.05
Rate . Amount .
210.00 210.00
2.12 22.87
232.87 W
2.33
235.20 X
33.05
268.25 Y
40.24
308.49 Z
3.08
311.57
311.55
Rate . Amount .
200.00 200.00
2.12 22.87
222.87 W
2.23
225.10 X
31.63
256.73 Y
38.51
295.24 Z
2.95
298.19
298.20
Rate . Amount .
160.00 160.00
2.12 22.87
182.87 W
1.83
184.70 X
25.95
210.65 Y
31.60
242.25 Z
2.42
244.68
244.70
Rate . Amount .
355.00 355.00
2.12 28.66
383.66 W
3.84
387.50 X
54.44
441.94 Y
66.29
508.23 Z
5.08
513.32
513.30
Rate . Amount .
300.00 300.00
2.12 28.66
328.66 W
3.29
331.95 X
46.64
378.59 Y
56.79
435.38 Z
4.35
439.73
439.75
Rate . Amount .
300.00 300.00
2.12 22.87
322.87 W
3.23
326.10 X
45.82
371.92 Y
55.79
427.71 Z
4.28
431.99
432.00
Rate . Amount .
280.00 280.00
2.12 22.87
302.87 W
3.03
305.90 X
42.98
348.88 Y
52.33
401.22 Z
4.01
405.23
405.25
Rate . Amount .
730.00 730.00
18.00 18.00
2.12 28.39
776.39 W
7.76
784.15 X
110.17
894.32 Y
134.15
1028.47 Z
10.28
1038.76
1038.75
Rate . Amount .
630.00 630.00
18.00 18.00
2.12 28.39
676.39 W
6.76
683.15 X
95.98
779.13 Y
116.87
896.00 Z
8.96
904.96
904.95
Rate . Amount .
525.00 525.00
16.00 16.00
2.12 22.87
563.87 W
5.64
569.51 X
80.02
649.53 Y
97.43
746.96 Z
7.47
754.43
754.45
Rate . Amount .
500.00 500.00
16.00 16.00
2.12 22.87
538.87 W
5.39
544.26 X
76.47
620.73 Y
93.11
713.84 Z
7.14
720.98
721.00
Rate . Amount .
615.00 615.00
2.12 28.66
643.66 W
6.44
650.10 X
91.34
741.44 Y
111.22
852.65 Z
8.53
861.18
861.20
Rate . Amount .
630.00 630.00
2.12 28.66
658.66 W
6.59
665.25 X
93.47
758.72 Y
113.81
872.52 Z
8.73
881.25
881.25
Rate . Amount .
510.00 510.00
2.12 28.66
538.66 W
5.39
544.05 X
76.44
620.49 Y
93.07
713.56 Z
7.14
720.70
720.70
Rate . Amount .
410.00 410.00
2.12 22.87
432.87 W
4.33
437.20 X
61.43
498.63 Y
74.79
573.43 Z
5.73
579.16
579.15
Rate . Amount .
470.00 470.00
2.12 22.87
492.87 W
4.93
497.80 X
69.94
567.74 Y
85.16
652.91 Z
6.53
659.44
659.45
Rate . Amount .
275.00 275.00
2.12 22.87
297.87 W
2.98
300.85 X
42.27
343.12 Y
51.47
394.59 Z
3.95
398.54
398.55
Rate . Amount .
455.00 455.00
18.00 18.00
2.12 28.66
501.66 W
5.02
506.68 X
71.19
577.87 Y
86.68
664.55 Z
6.65
671.19
671.20
Rate . Amount .
500.00 500.00
18.00 18.00
2.12 28.66
546.66 W
5.47
552.13 X
77.57
629.70 Y
94.46
724.16 Z
7.24
731.40
731.40
Rate . Amount .
390.00 390.00
16.00 16.00
2.12 22.87
428.87 W
4.29
433.16 X
60.86
494.02 Y
74.10
568.13 Z
5.68
573.81
573.80
Rate . Amount .
390.00 390.00
16.00 16.00
2.12 22.87
428.87 W
4.29
433.16 X
60.86
494.02 Y
74.10
568.13 Z
5.68
573.81
573.80
Rate . Amount .
405.00 405.00
2.12 28.66
433.66 W
4.34
438.00 X
61.54
499.54 Y
74.93
574.47 Z
5.74
580.21
580.20
Rate . Amount .
500.00 500.00
2.12 28.66
528.66 W
5.29
533.95 X
75.02
608.97 Y
91.35
700.31 Z
7.00
707.32
707.30
Rate . Amount .
400.00 400.00
2.12 28.66
428.66 W
4.29
432.95 X
60.83
493.78 Y
74.07
567.85 Z
5.68
573.52
573.50
Rate . Amount .
315.00 315.00
2.12 22.87
337.87 W
3.38
341.25 X
47.95
389.20 Y
58.38
447.58 Z
4.48
452.06
452.05
Rate . Amount .
350.00 350.00
2.12 22.87
372.87 W
3.73
376.60 X
52.91
429.52 Y
64.43
493.94 Z
4.94
498.88
498.90
Rate . Amount .
215.00 215.00
2.12 22.87
237.87 W
2.38
240.25 X
33.76
274.01 Y
41.10
315.11 Z
3.15
318.26
318.25
Rate . Amount .
725.00 725.00
18.00 18.00
2.12 28.66
771.66 W
7.72
779.38 X
109.50
888.88 Y
133.33
1022.21 Z
10.22
1032.44
1032.45
Rate . Amount .
900.00 900.00
18.00 18.00
2.12 28.66
946.66 W
9.47
956.13 X
134.34
1090.47 Y
163.57
1254.03 Z
12.54
1266.58
1266.60
Rate . Amount .
625.00 625.00
2.12 28.66
653.66 W
6.54
660.20 X
92.76
752.96 Y
112.94
865.90 Z
8.66
874.56
874.55
Rate . Amount .
800.00 800.00
2.12 28.66
828.66 W
8.29
836.95 X
117.59
954.54 Y
143.18
1097.72 Z
10.98
1108.70
1108.70
Rate . Amount .
400.00 400.00
2.12 28.66
428.66 W
4.29
432.95 X
60.83
493.78 Y
74.07
567.85 Z
5.68
573.52
573.50
Rate . Amount .
575.00 575.00
18.00 18.00
2.12 28.66
621.66 W
6.22
627.88 X
88.22
716.10 Y
107.41
823.51 Z
8.24
831.75
831.75
Rate . Amount .
650.00 650.00
18.00 18.00
2.12 28.66
696.66 W
6.97
703.63 X
98.86
802.49 Y
120.37
922.86 Z
9.23
932.09
932.10
Rate . Amount .
525.00 525.00
2.12 28.66
553.66 W
5.54
559.20 X
78.57
637.77 Y
95.66
733.43 Z
7.33
740.77
740.75
Rate . Amount .
600.00 600.00
2.12 28.66
628.66 W
6.29
634.95 X
89.21
724.16 Y
108.62
832.78 Z
8.33
841.11
841.10
Rate . Amount .
375.00 375.00
2.12 28.66
403.66 W
4.04
407.70 X
57.28
464.98 Y
69.75
534.73 Z
5.35
540.08
540.10
Rate . Amount .
550.00 550.00
2.12 28.66
578.66 W
5.79
584.45 X
82.12
666.56 Y
99.98
766.55 Z
7.67
774.21
774.20
Rate . Amount .
540.00 540.00
2.12 28.66
568.66 W
5.69
574.35 X
80.70
655.05 Y
98.26
753.30 Z
7.53
760.83
760.85
Rate . Amount .
625.00 625.00
2.12 28.66
653.66 W
6.54
660.20 X
92.76
752.96 Y
112.94
865.90 Z
8.66
874.56
874.55
Rate . Amount .
425.00 425.00
2.12 22.87
447.87 W
4.48
452.35 X
63.56
515.91 Y
77.39
593.30 Z
5.93
599.23
599.25
Rate . Amount .
450.00 450.00
2.12 22.87
472.87 W
4.73
477.60 X
67.10
544.71 Y
81.71
626.41 Z
6.26
632.68
632.70
Rate . Amount .
435.00 435.00
2.12 28.66
463.66 W
4.64
468.30 X
65.80
534.10 Y
80.11
614.21 Z
6.14
620.35
620.35
Rate . Amount .
430.00 430.00
2.12 28.66
458.66 W
4.59
463.25 X
65.09
528.34 Y
79.25
607.59 Z
6.08
613.66
613.65
Rate . Amount .
390.00 390.00
2.12 28.66
418.66 W
4.19
422.85 X
59.41
482.26 Y
72.34
554.60 Z
5.55
560.14
560.15
Rate . Amount .
350.00 350.00
2.12 22.87
372.87 W
3.73
376.60 X
52.91
429.52 Y
64.43
493.94 Z
4.94
498.88
498.90
Rate . Amount .
330.00 330.00
2.12 22.87
352.87 W
3.53
356.40 X
50.07
406.48 Y
60.97
467.45 Z
4.67
472.12
472.10
Rate . Amount .
260.00 260.00
2.12 22.87
282.87 W
2.83
285.70 X
40.14
325.84 Y
48.88
374.72 Z
3.75
378.47
378.45
Rate . Amount .
600.00 600.00
2.12 28.66
628.66 W
6.29
634.95 X
89.21
724.16 Y
108.62
832.78 Z
8.33
841.11
841.10
Rate . Amount .
730.00 730.00
2.12 28.66
758.66 W
7.59
766.25 X
107.66
873.91 Y
131.09
1004.99 Z
10.05
1015.04
1015.05
Rate . Amount .
500.00 500.00
2.12 28.66
528.66 W
5.29
533.95 X
75.02
608.97 Y
91.35
700.31 Z
7.00
707.32
707.30
Rate . Amount .
550.00 550.00
2.12 28.66
578.66 W
5.79
584.45 X
82.12
666.56 Y
99.98
766.55 Z
7.67
774.21
774.20
Rate . Amount .
430.00 430.00
2.12 28.66
458.66 W
4.59
463.25 X
65.09
528.34 Y
79.25
607.59 Z
6.08
613.66
613.65
Rate . Amount .
220.00 220.00
2.12 22.87
242.87 W
2.43
245.30 X
34.47
279.77 Y
41.97
321.73 Z
3.22
324.95
324.95
Rate . Amount .
360.00 360.00
2.12 22.87
382.87 W
3.83
386.70 X
54.33
441.04 Y
66.16
507.19 Z
5.07
512.26
512.25
Rate . Amount .
310.00 310.00
2.12 28.66
338.66 W
3.39
342.05 X
48.06
390.11 Y
58.52
448.62 Z
4.49
453.11
453.10
Rate . Amount .
390.00 390.00
2.12 28.66
418.66 W
4.19
422.85 X
59.41
482.26 Y
72.34
554.60 Z
5.55
560.14
560.15
Rate . Amount .
360.00 360.00
2.12 38.03
398.03 W
3.98
402.01 X
56.48
458.50 Y
68.77
527.27 Z
5.27
532.54
532.55
Rate . Amount .
460.00 460.00
2.12 38.03
498.03 W
4.98
503.01 X
70.67
573.69 Y
86.05
659.74 Z
6.60
666.34
666.35
Rate . Amount .
360.00 360.00
2.12 22.87
382.87 W
3.83
386.70 X
54.33
441.04 Y
66.16
507.19 Z
5.07
512.26
512.25
Rate . Amount .
295.00 295.00
2.12 22.87
317.87 W
3.18
321.05 X
45.11
366.16 Y
54.92
421.09 Z
4.21
425.30
425.30
Rate . Amount .
230.00 230.00
2.12 22.87
252.87 W
2.53
255.40 X
35.88
291.29 Y
43.69
334.98 Z
3.35
338.33
338.35
Rate . Amount .
300.00 300.00
2.12 34.17
334.17 W
3.34
337.52 X
47.42
384.94 Y
57.74
442.68 Z
4.43
447.10
447.10
Rate . Amount .
400.00 400.00
2.12 34.17
434.17 W
4.34
438.52 X
61.61
500.13 Y
75.02
575.15 Z
5.75
580.90
580.90
Rate . Amount .
440.00 440.00
2.12 28.66
468.66 W
4.69
473.35 X
66.51
539.85 Y
80.98
620.83 Z
6.21
627.04
627.05
Rate . Amount .
310.00 310.00
2.12 22.87
332.87 W
3.33
336.20 X
47.24
383.44 Y
57.52
440.96 Z
4.41
445.37
445.35
Rate . Amount .
485.00 485.00
18.00 18.00
2.12 28.66
531.66 W
5.32
536.98 X
75.45
612.42 Y
91.86
704.29 Z
7.04
711.33
711.35
Rate . Amount .
410.00 410.00
18.00 18.00
2.12 28.66
456.66 W
4.57
461.23 X
64.80
526.03 Y
78.90
604.94 Z
6.05
610.99
611.00
Rate . Amount .
285.00 285.00
16.00 16.00
2.12 22.87
323.87 W
3.24
327.11 X
45.96
373.07 Y
55.96
429.03 Z
4.29
433.32
433.30
Rate . Amount .
300.00 300.00
16.00 16.00
2.12 22.87
338.87 W
3.39
342.26 X
48.09
390.35 Y
58.55
448.90 Z
4.49
453.39
453.40
Rate . Amount .
265.00 265.00
2.12 28.66
293.66 W
2.94
296.60 X
41.67
338.27 Y
50.74
389.01 Z
3.89
392.90
392.90
Rate . Amount .
300.00 300.00
2.12 28.66
328.66 W
3.29
331.95 X
46.64
378.59 Y
56.79
435.38 Z
4.35
439.73
439.75
Rate . Amount .
270.00 270.00
2.12 28.66
298.66 W
2.99
301.65 X
42.38
344.03 Y
51.60
395.64 Z
3.96
399.59
399.60
Rate . Amount .
215.00 215.00
2.12 22.87
237.87 W
2.38
240.25 X
33.76
274.01 Y
41.10
315.11 Z
3.15
318.26
318.25
Rate . Amount .
210.00 210.00
2.12 22.87
232.87 W
2.33
235.20 X
33.05
268.25 Y
40.24
308.49 Z
3.08
311.57
311.55
Rate . Amount .
270.00 270.00
2.12 28.66
298.66 W
2.99
301.65 X
42.38
344.03 Y
51.60
395.64 Z
3.96
399.59
399.60
Rate . Amount .
300.00 300.00
2.12 28.66
328.66 W
3.29
331.95 X
46.64
378.59 Y
56.79
435.38 Z
4.35
439.73
439.75
Rate . Amount .
180.00 180.00
2.12 22.87
202.87 W
2.03
204.90 X
28.79
233.69 Y
35.05
268.75 Z
2.69
271.43
271.45
Rate . Amount .
180.00 180.00
2.12 22.87
202.87 W
2.03
204.90 X
28.79
233.69 Y
35.05
268.75 Z
2.69
271.43
271.45
Rate . Amount .
275.00 275.00
2.12 28.66
303.66 W
3.04
306.70 X
43.09
349.79 Y
52.47
402.26 Z
4.02
406.28
406.30
Rate . Amount .
250.00 250.00
2.12 22.87
272.87 W
2.73
275.60 X
38.72
314.33 Y
47.15
361.47 Z
3.61
365.09
365.10
Rate . Amount .
210.00 205.80
55.00 6.05
2.12 28.66
2.12 3.03
784.00 47.04
714.00 42.84
645.00 77.40
410.82 W
4.11
414.93 X
58.30
473.23 Y
70.98
544.21 Z
5.44
549.66
549.65
Rate . Amount .
210.00 184.80
55.00 4.95
2.12 22.87
2.12 3.03
784.00 39.20
714.00 35.70
645.00 58.05
348.61 W
3.49
352.09 X
49.47
401.56 Y
60.23
461.80 Z
4.62
466.41
466.40
Rate . Amount .
210.00 161.70
55.00 3.30
2.12 14.33
2.12 3.03
784.00 31.36
714.00 35.70
645.00 32.25
281.67 W
2.82
284.49 X
39.97
324.46 Y
48.67
373.13 Z
3.73
376.86
376.85
Rate . Amount .
67.50 67.50
2.12 28.66
96.16 W
0.96
97.12 X
13.65
110.77 Y
16.62
127.39 Z
1.27
128.66
128.65
Rate . Amount .
37.00 37.00
2.12 22.87
59.87 W
0.60
60.47 X
8.50
68.97 Y
10.35
79.32 Z
0.79
80.11
80.10
Rate . Amount .
35.00 35.00
2.12 20.12
55.12 W
0.55
55.67 X
7.82
63.49 Y
9.52
73.02 Z
0.73
73.75
73.75
Rate . Amount .
450.00 450.00
2.12 28.66
2.12 5.79
784.00 392.00
645.00 322.50
1198.95 W
11.99
1210.94 X
170.14
1381.08 Y
207.16
1588.24 Z
15.88
1604.12
1604.10
Rate . Amount .
300.00 300.00
2.12 28.66
2.12 5.79
784.00 392.00
645.00 322.50
1048.95 W
10.49
1059.44 X
148.85
1208.29 Y
181.24
1389.53 Z
13.90
1403.43
1403.45
Rate . Amount .
540.00 540.00
2.12 28.66
568.66 W
5.69
574.35 X
80.70
655.05 Y
98.26
753.30 Z
7.53
760.83
760.85
Rate . Amount .
500.00 500.00
2.12 28.66
2.12 5.79
784.00 392.00
645.00 322.50
1248.95 W
12.49
1261.44 X
177.23
1438.67 Y
215.80
1654.47 Z
16.54
1671.02
1671.00
Rate . Amount .
220.00 220.00
2.12 28.66
2.12 5.79
784.00 392.00
645.00 322.50
968.95 W
9.69
978.64 X
137.50
1116.14 Y
167.42
1283.56 Z
12.84
1296.39
1296.40
Rate . Amount .
385.00 385.00
2.12 28.66
413.66 W
4.14
417.80 X
58.70
476.50 Y
71.47
547.97 Z
5.48
553.45
553.45
Rate . Amount .
8843.45 194.56 A
2.12 22.05
2.12 8.82
784.00 109.76
645.00 174.15
509.33 W
3.15
512.48 X
44.67
557.15 Y
54.39
611.54 Z
4.17
615.71
615.70
Rate . Amount .
8843.45 132.65 A
2.12 16.54
2.12 7.44
784.00 78.40
645.00 129.00
364.03 W
2.31
366.34 X
32.83
399.18 Y
39.98
439.15 Z
3.07
442.22
442.20
Rate . Amount .
8843.45 70.75 A
2.12 11.02
2.12 5.79
784.00 54.88
645.00 90.30
232.74 W
1.62
234.36 X
22.99
257.35 Y
27.99
285.34 Z
2.15
287.48
287.50
Rate . Amount .
100.00 23.00
120.00 24.00
165.00 66.00
2.12 3.03
2.12 14.33
714.00 178.50
645.00 322.50
631.36 W
6.31
637.68 X
89.59
727.27 Y
109.09
836.36 Z
8.36
844.72
844.70
Rate . Amount .
100.00 23.00
165.00 33.00
2.12 43.82
2.12 15.16
714.00 142.80
645.00 161.25
419.03 W
4.19
423.22 X
59.46
482.68 Y
72.40
555.08 Z
5.55
560.63
560.65
Rate . Amount .
165.00 33.00
2.12 7.72
714.00 64.26
645.00 77.40
182.38 W
1.82
184.20 X
25.88
210.08 Y
31.51
241.59 Z
2.42
244.01
244.00
Rate . Amount .
55.50 192.03 A
131.45 454.82
2.12 36.38
683.23 W
0.36
683.59 X
5.16
688.75 Y
6.29
695.04 Z
0.48
695.52
69.55
69.55
Rate . Amount .
55.50 144.30 A
131.45 341.77
2.12 32.25
518.32 W
0.32
518.64 X
4.58
523.21 Y
5.57
528.78 Z
0.43
529.21
52.92
52.90
Rate . Amount .
86.55 299.46 A
2.12 25.91
325.37 W
0.26
325.63 X
3.68
329.30 Y
4.48
333.78 Z
0.34
334.12
33.41
33.40
Rate . Amount .
86.55 223.04 A
2.12 20.12
243.16 W
0.20
243.36 X
2.85
246.21 Y
3.48
249.69 Z
0.27
249.96
25.00
25.00
Rate . Amount .
175.00 157.50
2.12 14.33
714.00 178.50
645.00 161.25
511.58 W
5.12
516.70 X
72.60
589.29 Y
88.39
677.69 Z
6.78
684.46
684.45
Rate . Amount .
410.00 410.00
2500.00 2500.00
1200.00 1200.00
2.12 585.65
30.00 30.00
2.12 125.40
2.12 152.13
2.12 251.07
2.12 251.07
784.00 784.00
784.00 784.00
645.00 645.00
7718.32 W
77.18
7795.51 X
1095.27
8890.77 Y
1333.62
10224.39 Z
102.24
10326.63
10326.65
Rate . Amount .
34.00 34.00
2.12 42.99
76.99 W
0.77
77.76 X
10.93
88.69 Y
13.30
101.99 Z
1.02
103.01
103.00
Rate . Amount .
39.00 39.00
2.12 42.99
81.99 W
0.82
82.81 X
11.64
94.45 Y
14.17
108.62 Z
1.09
109.70
109.70
Rate Amount
200.00 200.00
2.12 42.99
242.99 W
2.43
245.42 X
34.48
279.91 Y
41.99
321.89 Z
3.22
325.11
325.10
Rate Amount A
200.00 200.00
2.12 42.99
242.99 W
2.43
245.42 X
34.48
279.91 Y
41.99
321.89 Z
3.22
325.11
325.10
Rate Amount
95.00 95.00
2.12 14.33
109.33 W
1.09
110.42 X
15.51
125.94 Y
18.89
144.83 Z
1.45
146.28
146.30
Rate Amount
110.00 110.00
2.12 42.99
152.99 W
1.53
154.52 X
21.71
176.23 Y
26.44
202.67 Z
2.03
204.70
204.70
Rate Amount
125.00 125.00
35.50 71.00 A
180.00 10.80
2.12 8.82
714.00 121.38
645.00 109.65
446.65 W
3.76
450.41 X
53.31
503.71 Y
64.91
568.62 Z
4.98
573.60
573.60
Rate Amount
145.00 145.00
35.50 71.00 A
180.00 10.80
2.12 8.82
714.00 121.38
645.00 109.65
466.65 W
3.96
470.61 X
56.14
526.75 Y
68.36
595.11 Z
5.24
600.35
600.35
Rate Amount
150.00 150.00
35.50 71.00 A
180.00 10.80
2.12 8.82
714.00 121.38
645.00 109.65
471.65 W
4.01
475.66 X
56.85
532.51 Y
69.23
601.74 Z
5.31
607.04
607.05
Rate Amount
55.00 55.00
2.12 14.33
69.33 W
0.69
70.02 X
9.84
79.86 Y
11.98
91.84 Z
0.92
92.76
92.75
Rate Amount
95.00 95.00
2.12 17.09
112.09 W
1.12
113.21 X
15.91
129.11 Y
19.37
148.48 Z
1.48
149.97
149.95
Rate Amount
4950.00 339.57
145.72 0.99
784.00 25.87
714.00 34.99
645.00 41.93
61.45 27.65 A
2.12 2.86
30.75 615.00 A
1088.86 W
4.46
1093.32 X
63.32
1156.64 Y
77.10
1233.74 Z
5.91
1239.65
247.93
247.95
Rate Amount
4950.00 497.97
145.72 1.47
784.00 37.63
714.00 51.41
645.00 61.92
61.45 43.63 A
2.12 4.20
30.75 615.00 A
1313.22 W
6.55
1319.77 X
92.89
1412.66 Y
113.10
1525.76 Z
8.67
1534.43
306.89
306.90
Rate Amount
4950.00 656.37
145.72 1.93
784.00 49.39
714.00 67.83
645.00 81.27
61.45 59.61 A
2.12 5.51
30.75 615.00 A
1536.91 W
8.62
1545.54 X
122.37
1667.90 Y
148.99
1816.90 Z
11.42
1828.32
365.66
365.65
Rate Amount
5500.00 5500.00
1600.00 1600.00
410.00 410.00
2.12 20.75
784.00 784.00
784.00 784.00
645.00 645.00
9743.75 W
97.44
9841.19 X
1382.69
11223.88 Y
1683.58
12907.46 Z
129.07
13036.54
13036.55
Rate Amount
9000.00 9000.00
2200.00 2200.00
2.12 20.75
784.00 392.00
645.00 322.50
11935.25 W
119.35
12054.61 X
1693.67
13748.28 Y
2062.24
15810.52 Z
158.11
15968.63
15968.65
Rate Amount
4500.00 4500.00
2.12 20.75
784.00 392.00
645.00 322.50
5235.25 W
52.35
5287.61 X
742.91
6030.52 Y
904.58
6935.09 Z
69.35
7004.44
7004.45
Rate Amount
9800.00 9800.00
2.12 20.75
784.00 784.00
645.00 645.00
784.00 784.00
12033.75 W
120.34
12154.09 X
1707.65
13861.74 Y
2079.26
15941.00 Z
159.41
16100.41
16100.40
Rate . Amount .
80.00 800.00
240.00
2.12 5.79
784.00 258.72
714.00 471.24
645.00 425.70
2201.45 W
22.01
2223.46 X
312.40
2535.86 Y
380.38
2916.24 Z
29.16
2945.40
294.54
294.55
Rate . Amount .
90.00 900.00
270.00
2.12 5.79
784.00 258.72
714.00 585.48
645.00 425.70
2445.69 W
24.46
2470.14 X
347.06
2817.20 Y
422.58
3239.78 Z
32.40
3272.18
327.22
327.20
Rate . Amount .
140.00 1400.00
420.00
2.12 5.79
784.00 258.72
714.00 699.72
645.00 425.70
3209.93 W
32.10
3242.03 X
455.50
3697.53 Y
554.63
4252.16 Z
42.52
4294.68
429.47
429.45
Rate . Amount .
180.00 1800.00
540.00
2.12 8.82
784.00 258.72
714.00 699.72
645.00 632.10
3939.36 W
39.39
3978.75 X
559.01
4537.77 Y
680.67
5218.43 Z
52.18
5270.62
527.06
527.05
Rate . Amount .
280.00 2800.00
840.00
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
5690.31 W
56.90
5747.21 X
807.48
6554.70 Y
983.20
7537.90 Z
75.38
7613.28
761.33
761.35
Rate . Amount .
360.00 3600.00
1080.00
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
6730.31 W
67.30
6797.61 X
955.06
7752.68 Y
1162.90
8915.58 Z
89.16
9004.73
900.47
900.45
Rate . Amount .
80.00 800.00
600.00
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4273.66 W
25.56
4299.22 X
362.66
4661.88 Y
441.58
5103.46 Z
33.85
5137.31
513.73
513.75
Rate . Amount .
90.00 900.00
675.00
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4448.66 W
27.31
4475.97 X
387.49
4863.46 Y
471.82
5335.28 Z
36.17
5371.45
537.15
537.15
Rate . Amount .
140.00 1400.00
1050.00
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
5323.66 W
36.06
5359.72 X
511.66
5871.38 Y
623.01
6494.38 Z
47.76
6542.15
654.21
654.20
Rate . Amount .
180.00 1800.00
1350.00
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
6023.66 W
43.06
6066.72 X
610.99
6677.71 Y
743.96
7421.67 Z
57.04
7478.70
747.87
747.85
Rate . Amount .
80.00 800.00
240.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
2057.32 W
20.57
2077.89 X
291.94
2369.84 Y
355.48
2725.31 Z
27.25
2752.57
275.26
275.25
Rate . Amount .
90.00 900.00
270.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
2187.32 W
21.87
2209.19 X
310.39
2519.58 Y
377.94
2897.52 Z
28.98
2926.50
292.65
292.65
Rate . Amount .
140.00 1400.00
420.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
2837.32 W
28.37
2865.69 X
402.63
3268.32 Y
490.25
3758.57 Z
37.59
3796.16
379.62
379.60
Rate . Amount .
180.00 1800.00
540.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
3357.32 W
33.57
3390.89 X
476.42
3867.31 Y
580.10
4447.41 Z
44.47
4491.88
449.19
449.20
Rate . Amount .
280.00 2800.00
840.00
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
4829.69 W
48.30
4877.99 X
685.36
5563.34 Y
834.50
6397.85 Z
63.98
6461.82
646.18
646.20
Rate . Amount .
360.00 3600.00
1080.00
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
5869.69 W
58.70
5928.39 X
832.94
6761.33 Y
1014.20
7775.52 Z
77.76
7853.28
785.33
785.35
Rate . Amount .
48.46 484.60
145.38
2.12 5.79
784.00 258.72
714.00 585.48
645.00 425.70
1905.67 W
19.06
1924.72 X
270.42
2195.15 Y
329.27
2524.42 Z
25.24
2549.66
254.97
254.95
Rate . Amount .
74.82 748.20
224.46
2.12 5.79
784.00 258.72
714.00 699.72
645.00 425.70
2362.59 W
23.63
2386.21 X
335.26
2721.48 Y
408.22
3129.70 Z
31.30
3160.99
316.10
316.10
Rate . Amount .
107.47 1074.70
214.94
2.12 8.82
784.00 258.72
714.00 699.72
645.00 425.70
2682.60 W
26.83
2709.43 X
380.67
3090.10 Y
463.51
3553.61 Z
35.54
3589.15
358.92
358.90
Rate . Amount .
162.00 1620.00
243.00
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
3913.31 W
39.13
3952.44 X
555.32
4507.76 Y
676.16
5183.93 Z
51.84
5235.76
523.58
523.60
Rate . Amount .
255.00 2550.00
382.50
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
4982.81 W
49.83
5032.64 X
707.09
5739.72 Y
860.96
6600.68 Z
66.01
6666.69
666.67
666.65
Rate . Amount .
48.46 484.60
363.45
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
3721.71 W
20.04
3741.75 X
284.34
4026.08 Y
346.21
4372.30 Z
26.54
4398.84
439.88
439.90
Rate . Amount .
74.82 748.20
561.15
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4183.01 W
24.65
4207.66 X
349.80
4557.46 Y
425.92
4983.38 Z
32.65
5016.03
501.60
501.60
Rate . Amount .
107.47 1074.70
537.35
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4485.71 W
27.68
4513.39 X
392.75
4906.14 Y
478.22
5384.36 Z
36.66
5421.02
542.10
542.10
Rate . Amount .
48.46 484.60
96.92
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
1598.84 W
15.99
1614.83 X
226.88
1841.71 Y
276.26
2117.97 Z
21.18
2139.15
213.91
213.90
Rate . Amount .
74.82 748.20
149.64
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
2004.57 W
20.05
2024.62 X
284.46
2309.07 Y
346.36
2655.44 Z
26.55
2681.99
268.20
268.20
Rate . Amount .
107.47 1074.70
214.94
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
2396.37 W
23.96
2420.33 X
340.06
2760.39 Y
414.06
3174.45 Z
31.74
3206.19
320.62
320.60
Rate . Amount .
162.00 1620.00
324.00
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
3133.69 W
31.34
3165.03 X
444.69
3609.71 Y
541.46
4151.17 Z
41.51
4192.68
419.27
419.25
Rate . Amount .
255.00 2550.00
510.00
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
4249.69 W
42.50
4292.19 X
603.05
4895.24 Y
734.29
5629.53 Z
56.30
5685.82
568.58
568.60
Rate . Amount .
285.00 2850.00
570.00
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
4893.10 W
48.93
4942.03 X
694.36
5636.39 Y
845.46
6481.84 Z
64.82
6546.66
654.67
654.65
Rate . Amount .
425.00 4250.00
850.00
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
6573.10 W
65.73
6638.83 X
932.76
7571.59 Y
1135.74
8707.32 Z
87.07
8794.40
879.44
879.45
Rate . Amount .
600.00 6000.00
1200.00
784.00 290.08
645.00 625.65
645.00 516.00
645.00 516.00
9147.73 W
91.48
9239.21 X
1298.11
10537.32 Y
1580.60
12117.91 Z
121.18
12239.09
1223.91
1223.90
Rate . Amount .
890.00 8900.00
1780.00
784.00 290.08
645.00 625.65
645.00 516.00
645.00 516.00
12627.73 W
126.28
12754.01 X
1791.94
14545.95 Y
2181.89
16727.84 Z
167.28
16895.12
1689.51
1689.50
Rate . Amount .
2575.00 25750.00
5150.00
784.00 454.72
645.00 993.30
645.00 774.00
645.00 774.00
33896.02 W
338.96
34234.98 X
4810.01
39044.99 Y
5856.75
44901.74 Z
449.02
45350.76
4535.08
4535.10
Rate . Amount .
60.00 60.00
2.12 3.86
784.00 86.24
645.00 70.95
221.05 W
2.21
223.26 X
31.37
254.63 Y
38.19
292.82 Z
2.93
295.75
295.75
Rate . Amount .
110.00 110.00
2.12 3.86
784.00 86.24
645.00 70.95
271.05 W
2.71
273.76 X
38.46
312.22 Y
46.83
359.06 Z
3.59
362.65
362.65
Rate . Amount .
150.00 150.00
2.12 3.86
784.00 86.24
645.00 70.95
311.05 W
3.11
314.16 X
44.14
358.30 Y
53.74
412.04 Z
4.12
416.16
416.15
Rate . Amount .
220.00 220.00
2.12 3.86
784.00 86.24
645.00 70.95
381.05 W
3.81
384.86 X
54.07
438.93 Y
65.84
504.77 Z
5.05
509.82
509.80
Rate . Amount .
410.00 410.00
2.12 3.86
784.00 86.24
645.00 70.95
571.05 W
5.71
576.76 X
81.03
657.79 Y
98.67
756.46 Z
7.56
764.03
764.05
Rate . Amount .
550.00 550.00
2.12 3.86
784.00 86.24
645.00 70.95
711.05 W
7.11
718.16 X
100.90
819.06 Y
122.86
941.92 Z
9.42
951.34
951.35
Rate . Amount .
1100.00 1100.00
2.12 3.86
784.00 86.24
645.00 70.95
1261.05 W
12.61
1273.66 X
178.95
1452.61 Y
217.89
1670.50 Z
16.70
1687.20
1687.20
Rate . Amount .
49.00 490.00
147.00
2.12 5.79
784.00 258.72
714.00 585.48
645.00 425.70
1912.69 W
19.13
1931.81 X
271.42
2203.23 Y
330.49
2533.72 Z
25.34
2559.06
255.91
255.90
Rate . Amount .
80.00 800.00
240.00
2.12 5.79
784.00 258.72
714.00 699.72
645.00 425.70
2429.93 W
24.30
2454.23 X
344.82
2799.05 Y
419.86
3218.90 Z
32.19
3251.09
325.11
325.10
Rate . Amount .
127.97 1279.70
383.91
2.12 5.79
784.00 258.72
714.00 699.72
645.00 425.70
3053.54 W
30.54
3084.07 X
433.31
3517.39 Y
527.61
4044.99 Z
40.45
4085.44
408.54
408.55
Rate . Amount .
165.00 1650.00
495.00
2.12 8.82
784.00 258.72
714.00 699.72
645.00 632.10
3744.36 W
37.44
3781.80 X
531.34
4313.15 Y
646.97
4960.12 Z
49.60
5009.72
500.97
500.95
Rate . Amount .
230.00 2300.00
690.00
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
5040.31 W
50.40
5090.71 X
715.25
5805.96 Y
870.89
6676.85 Z
66.77
6743.62
674.36
674.35
Rate . Amount .
375.25 3752.50
1125.75
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
6928.56 W
69.29
6997.85 X
983.20
7981.04 Y
1197.16
9178.20 Z
91.78
9269.98
927.00
927.00
Rate . Amount .
49.00 490.00
367.50
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
3731.16 W
20.13
3751.29 X
285.68
4036.97 Y
347.85
4384.81 Z
26.67
4411.48
441.15
441.15
Rate . Amount .
80.00 800.00
600.00
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4273.66 W
25.56
4299.22 X
362.66
4661.88 Y
441.58
5103.46 Z
33.85
5137.31
513.73
513.75
Rate . Amount .
127.97 1279.70
959.78
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
5113.14 W
33.95
5147.09 X
481.79
5628.87 Y
586.63
6215.50 Z
44.98
6260.48
626.05
626.05
Rate . Amount .
165.00 1650.00
1237.50
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
5761.16 W
40.43
5801.59 X
573.74
6375.34 Y
698.60
7073.94 Z
53.56
7127.50
712.75
712.75
Rate . Amount .
49.00 490.00
147.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
1654.32 W
16.54
1670.86 X
234.76
1905.62 Y
285.84
2191.46 Z
21.91
2213.38
221.34
221.35
Rate . Amount .
80.00 800.00
240.00
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
2057.32 W
20.57
2077.89 X
291.94
2369.84 Y
355.48
2725.31 Z
27.25
2752.57
275.26
275.25
Rate . Amount .
127.97 1279.70
383.91
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
2770.34 W
27.70
2798.04 X
393.13
3191.17 Y
478.68
3669.84 Z
36.70
3706.54
370.65
370.65
Rate . Amount .
165.00 1650.00
495.00
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
3251.73 W
32.52
3284.25 X
461.44
3745.68 Y
561.85
4307.54 Z
43.08
4350.61
435.06
435.05
Rate . Amount .
230.00 2300.00
690.00
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
4179.69 W
41.80
4221.49 X
593.12
4814.61 Y
722.19
5536.80 Z
55.37
5592.16
559.22
559.20
Rate . Amount .
375.25 3752.50
1125.75
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
6067.94 W
60.68
6128.62 X
861.07
6989.69 Y
1048.45
8038.14 Z
80.38
8118.53
811.85
811.85
Rate . Amount .
793.30 7933.00
2379.90
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
11786.00 W
117.86
11903.86 X
1672.49
13576.35 Y
2036.45
15612.81 Z
156.13
15768.93
1576.89
1576.90
Rate . Amount .
1031.05 10310.50
3093.15
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
14876.75 W
148.77
15025.52 X
2111.09
17136.60 Y
2570.49
19707.09 Z
197.07
19904.16
1990.42
1990.40
Rate . Amount .
1466.75 14667.50
4400.25
784.00 290.08
645.00 625.65
645.00 516.00
645.00 516.00
21015.48 W
210.15
21225.63 X
2982.20
24207.84 Y
3631.18
27839.01 Z
278.39
28117.40
2811.74
2811.75
Rate . Amount .
3145.15 31451.50
9435.45
784.00 454.72
645.00 993.30
645.00 774.00
645.00 774.00
43882.97 W
438.83
44321.80 X
6227.21
50549.01 Y
7582.35
58131.36 Z
581.31
58712.68
5871.27
5871.25
Rate . Amount .
95.00 1092.50
145.72 2.06
2.12 17.09
2.12 5.79
784.00 258.72
714.00 471.24
645.00 425.70
2273.10 W
22.73
2295.83 X
322.56
2618.39 Y
392.76
3011.15 Z
30.11
3041.26
304.13
304.15
Rate . Amount .
130.00 1495.00
145.72 2.66
2.12 17.09
2.12 5.79
784.00 258.72
714.00 585.48
645.00 425.70
2790.44 W
27.90
2818.34 X
395.98
3214.32 Y
482.15
3696.47 Z
36.96
3733.43
373.34
373.35
Rate . Amount .
196.00 2254.00
145.72 4.12
2.12 20.12
2.12 8.82
784.00 258.72
714.00 699.72
645.00 425.70
3671.20 W
36.71
3707.91 X
520.96
4228.87 Y
634.33
4863.21 Z
48.63
4911.84
491.18
491.20
Rate . Amount .
225.00 2587.50
145.72 5.31
2.12 20.12
2.12 8.82
784.00 258.72
714.00 699.72
645.00 632.10
4212.29 W
42.12
4254.41 X
597.75
4852.16 Y
727.82
5579.98 Z
55.80
5635.78
563.58
563.60
Rate . Amount .
290.00 3335.00
145.72 6.12
2.12 28.66
2.12 11.30
784.00 258.72
714.00 935.34
645.00 844.95
5420.09 W
54.20
5474.29 X
769.14
6243.43 Y
936.51
7179.94 Z
71.80
7251.74
725.17
725.15
Rate . Amount .
360.00 4140.00
145.72 8.66
2.12 28.66
2.12 11.30
784.00 258.72
714.00 1170.96
645.00 1057.80
6676.11 W
66.76
6742.87 X
947.37
7690.24 Y
1153.54
8843.78 Z
88.44
8932.21
893.22
893.20
Rate . Amount .
95.00 1092.50
145.72 2.06
2.12 17.09
10.05 100.50 A
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4085.81 W
22.67
4108.48 X
321.74
4430.22 Y
391.76
4821.98 Z
30.03
4852.02
485.20
485.20
Rate . Amount .
130.00 1495.00
145.72 2.66
2.12 17.09
12.00 120.00 A
171.80 1718.00 A
784.00 258.72
714.00 471.24
645.00 425.70
4508.41 W
26.70
4535.12 X
378.94
4914.06 Y
461.41
5375.47 Z
35.37
5410.84
541.08
541.10
Rate . Amount .
95.00 969.00
145.72 1.83
2.12 11.30
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
1999.45 W
19.99
2019.44 X
283.73
2303.17 Y
345.48
2648.65 Z
26.49
2675.14
267.51
267.50
Rate . Amount .
130.00 1326.00
145.72 2.36
2.12 11.30
784.00 62.72
645.00 103.20
645.00 425.70
645.00 425.70
2356.98 W
23.57
2380.55 X
334.47
2715.02 Y
407.25
3122.27 Z
31.22
3153.50
315.35
315.35
Rate . Amount .
196.00 1999.20
145.72 3.66
2.12 14.33
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
3123.92 W
31.24
3155.16 X
443.30
3598.46 Y
539.77
4138.22 Z
41.38
4179.61
417.96
417.95
Rate . Amount .
225.00 2295.00
145.72 4.71
2.12 14.33
784.00 94.08
645.00 161.25
645.00 425.70
645.00 425.70
3420.77 W
34.21
3454.98 X
485.42
3940.41 Y
591.06
4531.47 Z
45.31
4576.78
457.68
457.70
Rate . Amount .
290.00 2958.00
145.72 5.43
2.12 20.12
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
4173.23 W
41.73
4214.97 X
592.20
4807.17 Y
721.08
5528.24 Z
55.28
5583.53
558.35
558.35
Rate . Amount .
360.00 3672.00
145.72 7.68
2.12 20.12
784.00 125.44
645.00 212.85
645.00 425.70
645.00 425.70
4889.49 W
48.89
4938.39 X
693.84
5632.23 Y
844.83
6477.07 Z
64.77
6541.84
654.18
654.20
Rate . Amount .
415.00 4233.00
145.72 9.85
2.12 28.66
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
5744.62 W
57.45
5802.06 X
815.19
6617.25 Y
992.59
7609.84 Z
76.10
7685.94
768.59
768.60
Rate . Amount .
525.00 5355.00
145.72 12.84
2.12 28.66
784.00 196.00
645.00 425.70
645.00 425.70
645.00 425.70
6869.60 W
68.70
6938.30 X
974.83
7913.13 Y
1186.97
9100.10 Z
91.00
9191.10
919.11
919.10
Rate . Amount .
65.00 65.00
18.00 18.00
2.12 11.30
784.00 258.72
645.00 212.85
565.87 W
5.66
571.53 X
80.30
651.83 Y
97.77
749.60 Z
7.50
757.10
757.10
Rate . Amount .
452.00 452.00
25.00 25.00
2.12 11.30
784.00 352.80
645.00 290.25
1131.35 W
11.31
1142.66 X
160.54
1303.21 Y
195.48
1498.69 Z
14.99
1513.68
1513.70
Rate . Amount .
18.00 18.00
2.12 11.30
784.00 258.72
645.00 212.85
500.87 W
5.01
505.88 X
71.08
576.95 Y
86.54
663.50 Z
6.63
670.13
670.15
Rate . Amount .
210.00 210.00
2.12 17.09
227.09 W
2.27
229.36 X
32.22
261.58 Y
39.24
300.82 Z
3.01
303.83
303.85
Rate . Amount .
225.00 225.00
2.12 20.12
245.12 W
2.45
247.57 X
34.78
282.35 Y
42.35
324.71 Z
3.25
327.95
327.95
Rate . Amount .
210.00 210.00
2.12 17.09
227.09 W
2.27
229.36 X
32.22
261.58 Y
39.24
300.82 Z
3.01
303.83
303.85
Rate . Amount .
225.00 225.00
2.12 20.12
245.12 W
2.45
247.57 X
34.78
282.35 Y
42.35
324.71 Z
3.25
327.95
327.95
Rate . Amount .
375.00 375.00
2.12 22.87
397.87 W
3.98
401.85 X
56.46
458.31 Y
68.75
527.06 Z
5.27
532.33
532.35
Rate . Amount .
325.00 325.00
2.12 20.12
345.12 W
3.45
348.57 X
48.97
397.54 Y
59.63
457.18 Z
4.57
461.75
461.75
Rate . Amount .
415.00 415.00
2.12 25.91
440.91 W
4.41
445.32 X
62.57
507.88 Y
76.18
584.06 Z
5.84
589.91
589.90
Rate . Amount .
500.00 500.00
2.12 28.66
528.66 W
5.29
533.95 X
75.02
608.97 Y
91.35
700.31 Z
7.00
707.32
707.30
Rate . Amount .
625.00 625.00
2.12 31.42
656.42 W
6.56
662.98 X
93.15
756.13 Y
113.42
869.55 Z
8.70
878.25
878.25
Rate . Amount .
1080.00 1080.00
2.12 34.17
1114.17 W
11.14
1125.32 X
158.11
1283.42 Y
192.51
1475.94 Z
14.76
1490.70
1490.70
Rate . Amount .
1625.00 1625.00
2.12 39.96
1664.96 W
16.65
1681.61 X
236.27
1917.88 Y
287.68
2205.56 Z
22.06
2227.62
2227.60
Rate . Amount .
215.00 215.00
2.12 45.75
260.75 W
2.61
263.36 X
37.00
300.36 Y
45.05
345.41 Z
3.45
348.87
348.85
Rate . Amount .
240.00 240.00
2.12 57.05
297.05 W
2.97
300.02 X
42.15
342.17 Y
51.33
393.50 Z
3.93
397.43
397.45
Rate . Amount .
230.00 230.00
2.12 68.35
298.35 W
2.98
301.33 X
42.34
343.67 Y
51.55
395.22 Z
3.95
399.17
399.15
Rate . Amount .
350.00 350.00
2.12 28.66
378.66 W
3.79
382.45 X
53.73
436.18 Y
65.43
501.61 Z
5.02
506.63
506.65
Rate . Amount .
400.00 400.00
2.12 28.66
428.66 W
4.29
432.95 X
60.83
493.78 Y
74.07
567.85 Z
5.68
573.52
573.50
Rate . Amount .
475.00 475.00
2.12 31.42
506.42 W
5.06
511.48 X
71.86
583.35 Y
87.50
670.85 Z
6.71
677.56
677.55
Rate . Amount .
550.00 550.00
2.12 31.42
581.42 W
5.81
587.23 X
82.51
669.74 Y
100.46
770.20 Z
7.70
777.90
777.90
Rate . Amount .
575.00 575.00
2.12 34.17
609.17 W
6.09
615.27 X
86.44
701.71 Y
105.26
806.97 Z
8.07
815.04
815.05
Rate . Amount .
750.00 750.00
2.12 34.17
784.17 W
7.84
792.02 X
111.28
903.29 Y
135.49
1038.79 Z
10.39
1049.18
1049.20
Rate . Amount .
840.00 840.00
2.12 37.21
877.21 W
8.77
885.98 X
124.48
1010.46 Y
151.57
1162.03 Z
11.62
1173.65
1173.65
Rate . Amount .
950.00 950.00
2.12 37.21
987.21 W
9.87
997.08 X
140.09
1137.17 Y
170.58
1307.74 Z
13.08
1320.82
1320.80
Rate . Amount .
1525.00 1525.00
2.12 39.96
1564.96 W
15.65
1580.61 X
222.08
1802.69 Y
270.40
2073.09 Z
20.73
2093.82
2093.80
Rate . Amount .
1550.00 1550.00
2.12 39.96
1589.96 W
15.90
1605.86 X
225.62
1831.49 Y
274.72
2106.21 Z
21.06
2127.27
2127.25
Rate . Amount .
2300.00 2300.00
2.12 42.99
2342.99 W
23.43
2366.42 X
332.48
2698.91 Y
404.84
3103.74 Z
31.04
3134.78
3134.80
Rate . Amount .
2600.00 2600.00
2.12 42.99
2642.99 W
26.43
2669.42 X
375.05
3044.48 Y
456.67
3501.15 Z
35.01
3536.16
3536.15
Rate . Amount .
140.00 140.00
2.12 85.44
225.44 W
2.25
227.69 X
31.99
259.68 Y
38.95
298.63 Z
2.99
301.62
301.60
Rate . Amount .
160.00 160.00
2.12 100.04
260.04 W
2.60
262.64 X
36.90
299.54 Y
44.93
344.48 Z
3.44
347.92
347.90
Rate . Amount .
220.00 220.00
2.12 114.10
334.10 W
3.34
337.44 X
47.41
384.85 Y
57.73
442.58 Z
4.43
447.00
447.00
Rate . Amount .
30.00 30.00
2.12 25.91
55.91 W
0.56
56.47 X
7.93
64.40 Y
9.66
74.06 Z
0.74
74.80
74.80
Rate . Amount .
35.00 35.00
2.12 25.91
60.91 W
0.61
61.52 X
8.64
70.16 Y
10.52
80.68 Z
0.81
81.49
81.50
Rate . Amount .
35.00 35.00
2.12 28.66
63.66 W
0.64
64.30 X
9.03
73.33 Y
11.00
84.33 Z
0.84
85.18
85.20
Rate . Amount .
48.00 48.00
2.12 28.66
76.66 W
0.77
77.43 X
10.88
88.31 Y
13.25
101.55 Z
1.02
102.57
102.55
Rate . Amount .
110.00 110.00
2.12 14.33
124.33 W
1.24
125.57 X
17.64
143.22 Y
21.48
164.70 Z
1.65
166.35
166.35
Rate . Amount .
125.00 125.00
2.12 17.09
142.09 W
1.42
143.51 X
20.16
163.67 Y
24.55
188.22 Z
1.88
190.10
190.10
Rate . Amount .
784.00 133.28
714.00 121.38
645.00 857.85
2.12 34.17
1146.68 W
11.47
1158.15 X
162.72
1320.87 Y
198.13
1519.00 Z
15.19
1534.19
298.48
298.50
Rate . Amount .
784.00 729.12
714.00 442.68
645.00 1599.60
2.12 85.16
2856.56 W
28.57
2885.13 X
405.36
3290.49 Y
493.57
3784.06 Z
37.84
3821.90
545.99
546.00
Rate . Amount .
3800.00 3800.00
145.72 14.57
546.00 546.00 A
4360.57 W
38.15
4398.72 X
541.31
4940.02 Y
659.10
5599.13 Z
50.53
5649.66
5649.65
Rate . Amount .
3800.00 3800.00
145.72 14.57
546.00 546.00 A
4360.57 W
38.15
4398.72 X
541.31
4940.02 Y
659.10
5599.13 Z
50.53
5649.66
5649.65
Rate . Amount .
5700.00 5700.00
145.72 14.57
546.00 546.00 A
6260.57 W
57.15
6317.72 X
810.93
7128.64 Y
987.40
8116.04 Z
75.70
8191.74
8191.75
Rate . Amount .
5250.00 5250.00
145.72 14.57
546.00 546.00 A
5810.57 W
52.65
5863.22 X
747.07
6610.29 Y
909.64
7519.93 Z
69.74
7589.67
7589.65
Rate . Amount .
857.00 8570.00
358.32 35.83
298.50 591.03 A
9196.86 W
86.06
9282.92 X
1221.21
10504.13 Y
1486.97
11991.10 Z
114.00
12105.10
1210.51
1210.50
Rate . Amount .
1067.00 10670.00
478.64 47.86
298.50 770.13 A
11487.99 W
107.18
11595.17 X
1520.92
13116.09 Y
1851.89
14967.99 Z
141.98
15109.96
1511.00
1511.00
Rate . Amount .
1286.00 12860.00
597.20 59.72
298.50 961.17 A
13880.89 W
129.20
14010.09 X
1833.37
15843.46 Y
2232.34
18075.80 Z
171.15
18246.95
1824.69
1824.70
Rate . Amount .
2190.00 21900.00
971.45 97.15
298.50 1405.94 A
23403.08 W
219.97
23623.05 X
3121.50
26744.56 Y
3800.79
30545.35 Z
291.39
30836.74
3083.67
3083.65
Rate . Amount .
2857.00 28570.00
1380.48 138.05
298.50 1895.48 A
30603.52 W
287.08
30890.60 X
4073.82
34964.42 Y
4960.34
39924.76 Z
380.29
40305.05
4030.51
4030.50
Rate . Amount .
3857.00 38570.00
1706.30 170.63
298.50 2441.73 A
41182.36 W
387.41
41569.77 X
5497.49
47067.26 Y
6693.83
53761.08 Z
513.19
54274.28
5427.43
5427.45
Rate . Amount .
4619.00 46190.00
2388.82 238.88
298.50 3077.54 A
49506.42 W
464.29
49970.71 X
6588.49
56559.20 Y
8022.25
64581.45 Z
615.04
65196.48
6519.65
6519.65
Rate . Amount .
6095.00 60950.00
3257.48 325.75
298.50 3746.18 A
65021.92 W
612.76
65634.68 X
8695.34
74330.02 Y
10587.58
84917.59 Z
811.71
85729.31
8572.93
8572.95
Rate . Amount .
7381.00 73810.00
3981.36 398.14
298.50 4516.31 A
78724.44 W
742.08
79466.52 X
10530.51
89997.03 Y
12822.11
102819.14 Z
983.03
103802.16
10380.22
10380.20
Rate . Amount .
8571.00 85710.00
3981.36 398.14
298.50 5286.44 A
91394.57 W
861.08
92255.65 X
12219.18
104474.83 Y
14878.26
119353.09 Z
1140.67
120493.75
12049.38
12049.40
Rate . Amount .
11995.00 119950.00
5972.04 597.20
298.50 7044.60 A
127591.80 W
1205.47
128797.28 X
17106.25
145903.53 Y
20828.84
166732.37 Z
1596.88
168329.24
16832.92
16832.90
Rate . Amount .
55.00 93.50
500.00 140.00
50.00 19.00
2.12 14.33
2.12 11.30
784.00 784.00
714.00 714.00
645.00 1290.00
3066.13 W
30.66
3096.79 X
435.10
3531.89 Y
529.78
4061.68 Z
40.62
4102.29
410.23
410.25
Rate . Amount .
55.00 110.00
500.00 185.00
50.00 38.00
2.12 20.12
2.12 20.12
784.00 1176.00
714.00 1071.00
645.00 1935.00
4555.24 W
45.55
4600.79 X
646.41
5247.20 Y
787.08
6034.28 Z
60.34
6094.62
609.46
609.45
Rate . Amount .
55.00 126.50
500.00 210.00
50.00 38.00
2.12 22.87
2.12 22.87
784.00 1176.00
714.00 1071.00
645.00 1935.00
4602.25 W
46.02
4648.27 X
653.08
5301.35 Y
795.20
6096.56 Z
60.97
6157.52
615.75
615.75
Rate . Amount .
55.00 165.00
500.00 280.00
50.00 38.00
2.12 28.66
2.12 28.66
784.00 1568.00
714.00 1428.00
645.00 2580.00
6116.32 W
61.16
6177.49 X
867.94
7045.43 Y
1056.81
8102.24 Z
81.02
8183.26
818.33
818.35
Rate . Amount .
55.00 220.00
500.00 325.00
50.00 57.00
2.12 37.21
2.12 37.21
784.00 1960.00
714.00 1785.00
645.00 3225.00
7646.41 W
76.46
7722.88 X
1085.06
8807.94 Y
1321.19
10129.13 Z
101.29
10230.42
1023.04
1023.05
Rate . Amount .
55.00 297.00
500.00 375.00
50.00 76.00
2.12 42.99
2.12 42.99
784.00 2352.00
714.00 2142.00
645.00 3870.00
9197.99 W
91.98
9289.97 X
1305.24
10595.21 Y
1589.28
12184.49 Z
121.84
12306.33
1230.63
1230.65
Rate . Amount .
55.00 341.00
500.00 465.00
50.00 85.00
2.12 51.26
2.12 51.26
784.00 2352.00
714.00 2142.00
645.00 3870.00
9357.52 W
93.58
9451.10 X
1327.88
10778.98 Y
1616.85
12395.82 Z
123.96
12519.78
1251.98
1252.00
Rate . Amount .
55.00 407.00
500.00 560.00
50.00 85.00
2.12 57.05
2.12 57.05
784.00 3136.00
714.00 2856.00
645.00 5160.00
12318.10 W
123.18
12441.28 X
1748.00
14189.28 Y
2128.39
16317.67 Z
163.18
16480.85
1648.08
1648.10
Rate . Amount .
55.00 434.50
500.00 605.00
50.00 113.50
2.12 65.87
2.12 65.87
784.00 3528.00
714.00 3213.00
645.00 5805.00
13830.74 W
138.31
13969.04 X
1962.65
15931.69 Y
2389.75
18321.45 Z
183.21
18504.66
1850.47
1850.45
Rate . Amount .
55.00 467.50
500.00 655.00
50.00 113.50
2.12 71.38
2.12 71.38
784.00 3724.00
714.00 3391.50
645.00 6127.50
14621.76 W
146.22
14767.98 X
2074.90
16842.88 Y
2526.43
19369.31 Z
193.69
19563.00
1956.30
1956.30
Rate . Amount .
55.00 561.00
500.00 840.00
50.00 142.00
2.12 85.44
2.12 85.44
784.00 5096.00
714.00 4641.00
645.00 8385.00
19835.87 W
198.36
20034.23 X
2814.81
22849.04 Y
3427.36
26276.40 Z
262.76
26539.16
2653.92
2653.90
Rate . Amount .
210.00 21000.00
145.72 14.57
21014.57 W
210.15
21224.72 X
2982.07
24206.79 Y
3631.02
27837.81 Z
278.38
28116.19
28116.20
Rate . Amount .
16.00 160.00
11.50 460.00
2.12 5.79
784.00 117.60
714.00 107.10
645.00 516.00
1366.49 W
13.66
1380.15 X
193.91
1574.06 Y
236.11
1810.17 Z
18.10
1828.28
182.83
182.85
Rate . Amount .
18.00 180.00
11.50 920.00
2.12 8.82
784.00 196.00
714.00 178.50
645.00 645.00
2128.32 W
21.28
2149.60 X
302.02
2451.62 Y
367.74
2819.36 Z
28.19
2847.56
284.76
284.75
Rate . Amount .
20.00 200.00
13.00 1040.00
2.12 8.82
784.00 196.00
714.00 178.50
645.00 645.00
2268.32 W
22.68
2291.00 X
321.89
2612.89 Y
391.93
3004.82 Z
30.05
3034.87
303.49
303.50
Rate . Amount .
20.00 200.00
15.00 1200.00
2.12 8.82
784.00 235.20
714.00 214.20
645.00 709.50
2567.72 W
25.68
2593.40 X
364.37
2957.77 Y
443.67
3401.43 Z
34.01
3435.45
343.54
343.55
Rate . Amount .
25.00 250.00
17.50 1400.00
2.12 8.82
784.00 235.20
714.00 214.20
645.00 709.50
2817.72 W
28.18
2845.90 X
399.85
3245.74 Y
486.86
3732.61 Z
37.33
3769.93
376.99
377.00
Rate . Amount .
40.00 400.00
17.00 2040.00
2.12 11.30
784.00 313.60
714.00 285.60
645.00 838.50
3889.00 W
38.89
3927.89 X
551.87
4479.76 Y
671.96
5151.72 Z
51.52
5203.24
520.32
520.30
Rate . Amount .
45.00 450.00
17.00 2040.00
2.12 11.30
784.00 313.60
714.00 285.60
645.00 838.50
3939.00 W
39.39
3978.39 X
558.96
4537.35 Y
680.60
5217.96 Z
52.18
5270.14
527.01
527.00
Rate . Amount .
50.00 500.00
17.00 2720.00
2.12 11.30
784.00 392.00
714.00 357.00
645.00 967.50
4947.80 W
49.48
4997.28 X
702.12
5699.40 Y
854.91
6554.30 Z
65.54
6619.85
661.98
662.00
Rate . Amount .
73.00 730.00
27.00 4320.00
2.12 17.09
784.00 392.00
714.00 357.00
645.00 967.50
6783.59 W
67.84
6851.42 X
962.62
7814.05 Y
1172.11
8986.16 Z
89.86
9076.02
907.60
907.60
Rate . Amount .
92.00 920.00
27.00 5400.00
2.12 17.09
784.00 470.40
714.00 428.40
645.00 1096.50
8332.39 W
83.32
8415.71 X
1182.41
9598.12 Y
1439.72
11037.84 Z
110.38
11148.21
1114.82
1114.80
Rate . Amount .
110.00 1100.00
31.00 6200.00
2.12 17.09
784.00 509.60
714.00 464.10
645.00 1161.00
9451.79 W
94.52
9546.31 X
1341.26
10887.56 Y
1633.13
12520.70 Z
125.21
12645.90
1264.59
1264.60
Rate . Amount .
125.00 1250.00
37.00 7400.00
2.12 20.12
784.00 588.00
714.00 535.50
645.00 1290.00
11083.62 W
110.84
11194.45 X
1572.82
12767.28 Y
1915.09
14682.37 Z
146.82
14829.19
1482.92
1482.90
Rate . Amount .
2450.00 24500.00
145.72 64.12
546.00 2418.78 A
284.75 5695.00 A
32677.90 W
245.64
32923.54 X
3485.77
36409.31 Y
4244.33
40653.64 Z
325.40
40979.04
4097.90
4097.90
Rate . Amount .
2700.00 27000.00
145.72 81.60
546.00 3073.98 A
284.75 5695.00 A
35850.58 W
270.82
36121.40 X
3843.01
39964.41 Y
4679.32
44643.73 Z
358.75
45002.48
4500.25
4500.25
Rate . Amount .
2610.00 26100.00
145.72 81.60
546.00 3073.98 A
303.50 6070.00 A
35325.58 W
261.82
35587.40 X
3715.30
39302.70 Y
4523.81
43826.51 Z
346.83
44173.33
4417.33
4417.35
Rate . Amount .
3300.00 33000.00
145.72 99.09
546.00 3729.18 A
303.50 6070.00 A
42898.27 W
330.99
43229.26 X
4696.93
47926.19 Y
5719.05
53645.24 Z
438.46
54083.70
5408.37
5408.35
Rate . Amount .
3650.00 36500.00
145.72 104.92
546.00 3958.50 A
343.55 6871.00 A
47434.42 W
366.05
47800.47 X
5194.42
52994.89 Y
6324.81
59319.70 Z
484.90
59804.60
5980.46
5980.45
Rate . Amount .
4100.00 41000.00
145.72 126.05
546.00 4722.90 A
343.55 6871.00 A
52719.95 W
411.26
53131.21 X
5835.99
58967.20 Y
7106.00
66073.20 Z
544.79
66617.99
6661.80
6661.80
Rate . Amount .
7600.00 76000.00
145.72 177.78
546.00 6633.90 A
377.00 7540.00 A
90351.68 W
761.78
91113.46 X
10810.01
101923.46 Y
13162.43
115085.90 Z
1009.12
116095.02
11609.50
11609.50
Rate . Amount .
8900.00 89000.00
145.72 218.58
546.00 8217.30 A
377.00 7540.00 A
104975.88 W
892.19
105868.07 X
12660.56
118528.63 Y
15415.70
133944.33 Z
1181.87
135126.20
13512.62
13512.60
Rate . Amount .
10980.00 109800.00
145.72 262.30
546.00 9822.54 A
520.30 10406.00 A
130290.84 W
1100.62
131391.46 X
15618.39
147009.85 Y
19017.20
166027.05 Z
1457.99
167485.03
16748.50
16748.50
Rate . Amount .
15000.00 150000.00
145.72 335.16
546.00 12552.54 A
520.30 10406.00 A
173293.70 W
1503.35
174797.05 X
21333.31
196130.36 Y
25975.77
222106.13 Z
1991.48
224097.61
22409.76
22409.75
Rate . Amount .
15500.00 155000.00
145.72 352.64
546.00 13235.04 A
527.00 10540.00 A
179127.68 W
1553.53
180681.21 X
22045.32
202726.53 Y
26842.72
229569.25 Z
2057.94
231627.19
23162.72
23162.70
Rate . Amount .
18500.00 185000.00
145.72 441.53
546.00 16565.64 A
527.00 10540.00 A
212547.17 W
1854.42
214401.59 X
26315.08
240716.67 Y
32041.65
272758.32 Z
2456.53
275214.85
27521.48
27521.50
Rate . Amount .
286.85 86.06 A
253.95 76.19 A
5660.45 226.42 A
6882.00 688.20 A
386.55 270.59 A
125.00 125.00
2.12 3.03
10719.30 214.39 A
645.00 -24.51
2.12 8.82
1674.17 W
1.12
1675.29 X
15.94
1691.23 Y
19.41
1710.65 Z
1.49
1712.13
1712.15
Rate . Amount .
286.85 418.80 A
253.95 370.77 A
5660.45 849.07 A
6882.00 3922.74 A
386.55 834.95 A
210.00 210.00
2.12 17.09
10719.30 1822.28 A
645.00 -206.40
88.95 1174.14 A
766.55 659.23 A
2.12 17.09
10089.75 W
0.38
10090.13 X
5.36
10095.49 Y
6.53
10102.02 Z
0.50
10102.52
10102.50
Rate . Amount .
286.85 817.52 A
253.95 723.76 A
5660.45 1301.90 A
6882.00 7157.28 A
386.55 1704.69 A
210.00 210.00
2.12 17.09
10719.30 2894.21 A
645.00 -328.95
88.95 1949.78 A
766.55 1142.16 A
2.12 17.09
17606.53 W
-0.85
17605.68 X
-12.03
17593.65 Y
-14.65
17579.00 Z
-1.12
17577.88
17577.90
Rate . Amount .
286.85 1176.09 A
253.95 1041.20 A
5660.45 1867.95 A
6882.00 9084.24 A
386.55 2481.65 A
210.00 210.00
2.12 17.09
10719.30 4394.91 A
645.00 -496.65
88.95 2917.56 A
766.55 1763.07 A
2.12 17.09
24474.18 W
-2.52
24471.66 X
-35.83
24435.83 Y
-43.62
24392.21 Z
-3.34
24388.86
24388.85
Rate . Amount .
286.85 418.80 A
253.95 370.77 A
5660.45 849.07 A
6882.00 3922.74 A
386.55 834.95 A
210.00 210.00
2.12 114.10
10719.30 1393.51 A
645.00 -154.80
88.95 932.20 A
766.55 659.23 A
2.12 17.09
9567.65 W
1.86
9569.51 X
26.45
9595.96 Y
32.20
9628.16 Z
2.47
9630.63
9630.65
Rate . Amount .
286.85 312.67 A
253.95 276.81 A
5660.45 735.86 A
6882.00 2408.70 A
386.55 510.25 A
250.00 250.00
2.12 28.66
10719.30 2358.25 A
645.00 -264.45
88.95 1586.87 A
766.55 789.55 A
2.12 17.09
9010.24 W
0.31
9010.55 X
4.44
9014.99 Y
5.41
9020.40 Z
0.41
9020.81
9020.80
Rate . Amount .
55.50 37.35 A
131.45 88.47 A
2.12 28.66
154.48 W
0.29
154.77 X
4.07
158.83 Y
4.95
163.79 Z
0.38
164.17
16.42
16.40
Rate . Amount .
55.50 46.90 A
131.45 111.08 A
2.12 28.66
186.64 W
0.29
186.92 X
4.07
190.99 Y
4.95
195.94 Z
0.38
196.32
19.63
19.65
Rate . Amount .
55.50 58.89 A
131.45 139.47 A
2.12 42.99
241.35 W
0.43
241.78 X
6.10
247.88 Y
7.43
255.31 Z
0.57
255.88
25.59
25.60
Rate . Amount .
55.50 74.04 A
131.45 175.35 A
2.12 42.99
292.38 W
0.43
292.81 X
6.10
298.92 Y
7.43
306.34 Z
0.57
306.91
30.69
30.70
Rate . Amount .
55.50 84.36 A
131.45 199.80 A
2.12 57.05
341.21 W
0.57
341.78 X
8.10
349.88 Y
9.86
359.74 Z
0.76
360.49
36.05
36.05
Rate . Amount .
55.50 105.12 A
131.45 248.97 A
2.12 57.05
411.13 W
0.57
411.70 X
8.10
419.80 Y
9.86
429.66 Z
0.76
430.41
43.04
43.05
Rate . Amount .
86.55 58.25 A
2.12 17.09
75.34 W
0.17
75.51 X
2.42
77.93 Y
2.95
80.88 Z
0.23
81.11
8.11
8.10
Rate . Amount .
86.55 73.13 A
2.12 17.09
90.22 W
0.17
90.39 X
2.42
92.82 Y
2.95
95.77 Z
0.23
96.00
9.60
9.60
Rate . Amount .
86.55 91.83 A
2.12 22.87
114.70 W
0.23
114.93 X
3.25
118.18 Y
3.95
122.13 Z
0.30
122.43
12.24
12.25
Rate . Amount .
86.55 115.46 A
2.12 23.15
138.61 W
0.23
138.84 X
3.29
142.12 Y
4.00
146.12 Z
0.31
146.43
14.64
14.65
Rate . Amount .
86.55 131.56 A
2.12 28.66
160.22 W
0.29
160.51 X
4.07
164.57 Y
4.95
169.52 Z
0.38
169.90
16.99
17.00
Rate . Amount .
86.55 163.93 A
2.12 28.66
192.59 W
0.29
192.87 X
4.07
196.94 Y
4.95
201.89 Z
0.38
202.27
20.23
20.25
Rate . Amount .
115.10 77.46 A
2.12 17.09
94.55 W
0.17
94.72 X
2.42
97.15 Y
2.95
100.10 Z
0.23
100.32
10.03
10.05
Rate . Amount .
115.10 97.26 A
2.12 17.09
114.35 W
0.17
114.52 X
2.42
116.94 Y
2.95
119.89 Z
0.23
120.12
12.01
12.00
Rate . Amount .
115.10 122.12 A
2.12 22.87
145.00 W
0.23
145.22 X
3.25
148.47 Y
3.95
152.42 Z
0.30
152.73
15.27
15.25
Rate . Amount .
115.10 153.54 A
2.12 22.87
176.42 W
0.23
176.65 X
3.25
179.89 Y
3.95
183.85 Z
0.30
184.15
18.41
18.40
Rate . Amount .
115.10 174.95 A
2.12 25.91
200.86 W
0.26
201.12 X
3.68
204.79 Y
4.48
209.27 Z
0.34
209.61
20.96
20.95
Rate . Amount .
115.10 218.00 A
2.12 25.91
243.91 W
0.26
244.16 X
3.68
247.84 Y
4.48
252.32 Z
0.34
252.66
25.27
25.25
Rate . Amount .
115.10 274.74 A
2.12 28.66
303.41 W
0.29
303.69 X
4.07
307.76 Y
4.95
312.71 Z
0.38
313.09
31.31
31.30
Rate . Amount .
115.10 321.82 A
2.12 31.42
353.24 W
0.31
353.55 X
4.46
358.01 Y
5.43
363.44 Z
0.42
363.86
36.39
36.40
Rate . Amount .
2131.25 1577.13
1577.13
1577.13
157.71
157.70
Rate . Amount .
1300.00 1300.00
163.93 163.93
645.00 58.05
645.00 70.95
1592.93 W
15.93
1608.86 X
226.04
1834.90 Y
275.24
2110.14 Z
21.10
2131.24
2131.25
Rate . Amount .
2131.25 1598.44
1598.44
1598.44
159.84
159.85
Rate . Amount .
2131.25 1641.06
1641.06
1641.06
164.11
164.10
Rate . Amount .
2131.25 1683.69
1683.69
1683.69
168.37
168.35
Rate . Amount .
2131.25 1705.00
1705.00
1705.00
170.50
170.50
Rate . Amount .
2131.25 1768.94
1768.94
1768.94
176.89
176.90
Rate . Amount .
2131.25 2791.94
2791.94
2791.94
279.19
279.20
Rate . Amount .
2131.25 2877.19
2877.19
2877.19
287.72
287.70
Rate . Amount .
2131.25 3047.69
3047.69
3047.69
304.77
304.75
Rate . Amount .
2131.25 4539.56
4539.56
4539.56
453.96
453.95
Rate . Amount .
784.00 392.00
645.00 1935.00
750.00 375.00
340.00 40.80
2.12 28.66
2771.46 W
27.71
2799.18 X
393.28
3192.46 Y
478.87
3671.33 Z
36.71
3708.04
618.01
618.00
Rate . Amount .
784.00 486.08
645.00 2257.50
750.00 465.00
340.00 40.80
2.12 28.66
3278.04 W
32.78
3310.82 X
465.17
3775.99 Y
566.40
4342.39 Z
43.42
4385.82
730.97
730.95
Rate . Amount .
784.00 588.00
645.00 2580.00
750.00 562.50
340.00 40.80
2.12 28.66
3799.96 W
38.00
3837.96 X
539.23
4377.20 Y
656.58
5033.78 Z
50.34
5084.11
847.35
847.35
Rate . Amount .
625.00 625.00
2.12 28.66
784.00 133.28
645.00 109.65
2.12 15.16
911.75 W
9.12
920.87 X
129.38
1050.25 Y
157.54
1207.79 Z
12.08
1219.87
813.24
813.25
Rate . Amount .
290.00 2958.00
145.72 5.43
2.12 14.33
784.00 258.72
645.00 483.75
2.12 15.37
3735.60 W
37.36
3772.95 X
530.10
4303.05 Y
645.46
4948.51 Z
49.49
4998.00
499.80
499.80
Rate . Amount .
700.00 700.00
2.12 28.66
784.00 78.40
645.00 64.50
2.12 9.37
880.93 W
8.81
889.74 X
125.01
1014.75 Y
152.21
1166.96 Z
11.67
1178.63
1178.65
Rate . Amount .
35.00 35.00
2.12 3.86
784.00 86.24
645.00 70.95
196.05 W
1.96
198.01 X
27.82
225.83 Y
33.87
259.70 Z
2.60
262.30
262.30
Rate . Amount .
55.00 55.00
2.12 3.86
784.00 86.24
645.00 70.95
216.05 W
2.16
218.21 X
30.66
248.87 Y
37.33
286.20 Z
2.86
289.06
289.05
Rate . Amount .
115.00 115.00
2.12 3.86
784.00 86.24
645.00 70.95
276.05 W
2.76
278.81 X
39.17
317.98 Y
47.70
365.68 Z
3.66
369.34
369.35
Rate . Amount .
145.00 145.00
2.12 3.86
784.00 86.24
645.00 70.95
306.05 W
3.06
309.11 X
43.43
352.54 Y
52.88
405.42 Z
4.05
409.47
409.45
Rate . Amount .
230.00 230.00
2.12 3.86
784.00 86.24
645.00 70.95
391.05 W
3.91
394.96 X
55.49
450.45 Y
67.57
518.02 Z
5.18
523.20
523.20
Rate . Amount .
310.00 310.00
2.12 3.86
784.00 117.60
645.00 96.75
528.21 W
5.28
533.49 X
74.96
608.45 Y
91.27
699.71 Z
7.00
706.71
706.70
Rate . Amount .
525.00 525.00
2.12 3.86
784.00 117.60
645.00 96.75
743.21 W
7.43
750.64 X
105.46
856.11 Y
128.42
984.52 Z
9.85
994.37
994.35
Rate . Amount .
575.00 575.00
2.12 3.86
784.00 117.60
645.00 96.75
793.21 W
7.93
801.14 X
112.56
913.70 Y
137.06
1050.76 Z
10.51
1061.26
1061.25
Rate . Amount .
35.00 35.00
2.12 3.86
784.00 258.72
645.00 212.85
510.43 W
5.10
515.53 X
72.43
587.97 Y
88.19
676.16 Z
6.76
682.92
682.90
Rate . Amount .
55.00 55.00
2.12 3.86
784.00 258.72
645.00 212.85
530.43 W
5.30
535.73 X
75.27
611.00 Y
91.65
702.65 Z
7.03
709.68
709.70
Rate . Amount .
115.00 115.00
2.12 3.86
784.00 258.72
645.00 212.85
590.43 W
5.90
596.33 X
83.78
680.12 Y
102.02
782.14 Z
7.82
789.96
789.95
Rate . Amount .
145.00 145.00
2.12 3.86
784.00 258.72
645.00 212.85
620.43 W
6.20
626.63 X
88.04
714.67 Y
107.20
821.88 Z
8.22
830.09
830.10
Rate . Amount .
230.00 230.00
2.12 3.86
784.00 258.72
645.00 212.85
705.43 W
7.05
712.48 X
100.10
812.59 Y
121.89
934.47 Z
9.34
943.82
943.80
Rate . Amount .
310.00 310.00
2.12 3.86
784.00 352.80
645.00 290.25
956.91 W
9.57
966.48 X
135.79
1102.27 Y
165.34
1267.61 Z
12.68
1280.28
1280.30
Rate . Amount .
525.00 525.00
2.12 3.86
784.00 352.80
645.00 290.25
1171.91 W
11.72
1183.63 X
166.30
1349.93 Y
202.49
1552.42 Z
15.52
1567.94
1567.95
Rate . Amount .
575.00 575.00
2.12 3.86
784.00 352.80
645.00 290.25
1221.91 W
12.22
1234.13 X
173.39
1407.52 Y
211.13
1618.65 Z
16.19
1634.84
1634.85
Rate . Amount .
6.10 3050.00
2.12 380.33
2.12 190.16
3620.49 W
36.20
3656.70 X
513.77
4170.46 Y
625.57
4796.03 Z
47.96
4843.99
9.69
9.70
Rate . Amount .
6.10 3050.00
2.12 380.33
2.12 190.16
3620.49 W
36.20
3656.70 X
513.77
4170.46 Y
625.57
4796.03 Z
47.96
4843.99
9.69
9.70
Rate . Amount .
300.00 300.00
2.12 24.53
324.53 W
3.25
327.77 X
46.05
373.83 Y
56.07
429.90 Z
4.30
434.20
434.20
Rate . Amount .
500.00 500.00
2.12 34.45
534.45 W
5.34
539.79 X
75.84
615.64 Y
92.35
707.98 Z
7.08
715.06
715.05
Rate . Amount .
500.00 500.00
2.12 29.49
529.49 W
5.29
534.78 X
75.14
609.92 Y
91.49
701.41 Z
7.01
708.42
708.40
Rate . Amount .
420.00 420.00
2.12 24.53
444.53 W
4.45
448.97 X
63.08
512.05 Y
76.81
588.86 Z
5.89
594.75
594.75
Rate . Amount .
350.00 350.00
2.12 23.98
373.98 W
3.74
377.72 X
53.07
430.79 Y
64.62
495.40 Z
4.95
500.36
500.35
Rate . Amount .
40.00 40.00
2.12 6.13
46.13 W
0.46
46.59 X
6.55
53.13 Y
7.97
61.10 Z
0.61
61.71
61.70
Rate . Amount .
65.00 65.00
2.12 17.09
82.09 W
0.82
82.91 X
11.65
94.56 Y
14.18
108.74 Z
1.09
109.83
109.85
Rate . Amount .
90.00 90.00
2.12 17.09
107.09 W
1.07
108.16 X
15.20
123.35 Y
18.50
141.86 Z
1.42
143.28
143.30
Rate . Amount .
100.00 100.00
2.12 17.09
117.09 W
1.17
118.26 X
16.62
134.87 Y
20.23
155.10 Z
1.55
156.66
156.65
Rate . Amount .
110.00 110.00
2.12 17.09
127.09 W
1.27
128.36 X
18.03
146.39 Y
21.96
168.35 Z
1.68
170.03
170.05
Rate . Amount .
60.00 60.00
2.12 17.09
77.09 W
0.77
77.86 X
10.94
88.80 Y
13.32
102.12 Z
1.02
103.14
103.15
Rate . Amount .
68.00 68.00
2.12 17.09
85.09 W
0.85
85.94 X
12.07
98.01 Y
14.70
112.71 Z
1.13
113.84
113.85
Rate . Amount .
120.00 120.00
2.12 17.09
137.09 W
1.37
138.46 X
19.45
157.91 Y
23.69
181.60 Z
1.82
183.41
183.40
Rate . Amount .
115.00 115.00
2.12 20.12
135.12 W
1.35
136.47 X
19.17
155.64 Y
23.35
178.99 Z
1.79
180.78
180.80
Rate . Amount .
125.00 125.00
2.12 20.12
145.12 W
1.45
146.57 X
20.59
167.16 Y
25.07
192.24 Z
1.92
194.16
194.15
Rate . Amount .
55.00 55.00
2.12 17.09
72.09 W
0.72
72.81 X
10.23
83.04 Y
12.46
95.49 Z
0.95
96.45
96.45
Rate . Amount .
45.00 45.00
2.12 17.09
62.09 W
0.62
62.71 X
8.81
71.52 Y
10.73
82.25 Z
0.82
83.07
83.05
Rate . Amount .
16.00 16.00
2.12 8.82
24.82 W
0.25
25.07 X
3.52
28.59 Y
4.29
32.88 Z
0.33
33.21
33.20
Rate . Amount .
25.00 25.00
2.12 8.82
33.82 W
0.34
34.16 X
4.80
38.96 Y
5.84
44.80 Z
0.45
45.25
45.25
Rate . Amount .
118.00 118.00
2.12 8.82
126.82 W
1.27
128.09 X
18.00
146.08 Y
21.91
168.00 Z
1.68
169.68
169.70
Rate . Amount .
3715.00 37150.00
2.12 55.12
2.12 82.68
182.85 1828.50 A
39116.30 W
372.88
39489.18 X
5291.33
44780.50 Y
6442.80
51223.30 Z
493.95
51717.25
5171.73
5171.75
Rate . Amount .
4525.00 45250.00
2.12 55.12
2.12 82.68
182.85 1828.50 A
47216.30 W
453.88
47670.18 X
6440.76
54110.93 Y
7842.37
61953.30 Z
601.25
62554.55
6255.45
6255.45
Rate . Amount .
5910.00 59100.00
2.12 55.12
2.12 110.24
284.75 2847.50 A
62112.86 W
592.65
62705.51 X
8410.05
71115.56 Y
10240.21
81355.77 Z
785.08
82140.86
8214.09
8214.10
Rate . Amount .
2030.00 2030.00
2.12 55.12
2.12 82.68
182.85 365.70 A
2533.50 W
21.68
2555.18 X
307.62
2862.80 Y
374.56
3237.36 Z
28.72
3266.08
3266.10
Rate . Amount .
3143.00 3143.00
2.12 55.12
2.12 110.24
284.75 569.50 A
3877.86 W
33.08
3910.94 X
469.47
4380.42 Y
571.64
4952.05 Z
43.83
4995.88
4995.90
Rate . Amount .
4765.00 4765.00
2.12 82.68
2.12 137.80
343.55 687.10 A
5672.58 W
49.85
5722.43 X
707.46
6429.90 Y
861.42
7291.32 Z
66.04
7357.36
7357.35
Rate . Amount .
5145.00 5145.00
2.12 110.24
2.12 220.48
377.00 754.00 A
6229.72 W
54.76
6284.48 X
777.03
7061.51 Y
946.13
8007.64 Z
72.54
8080.17
8080.15
Rate . Amount .
2680.00 2680.00
2.12 55.12
2.12 82.68
182.85 365.70 A
3183.50 W
28.18
3211.68 X
399.86
3611.54 Y
486.88
4098.41 Z
37.33
4135.74
4135.75
Rate . Amount .
4370.00 4370.00
2.12 55.12
2.12 110.24
284.75 569.50 A
5104.86 W
45.35
5150.21 X
643.59
5793.80 Y
783.65
6577.45 Z
60.08
6637.53
6637.55
Rate . Amount .
5540.00 5540.00
2.12 82.68
2.12 137.80
343.55 687.10 A
6447.58 W
57.60
6505.18 X
817.44
7322.63 Y
995.33
8317.95 Z
76.31
8394.26
8394.25
Rate . Amount .
7860.00 7860.00
2.12 110.24
2.12 220.48
377.00 754.00 A
8944.72 W
81.91
9026.63 X
1162.30
10188.93 Y
1415.24
11604.17 Z
108.50
11712.67
11712.65
Rate . Amount .
75.00 75.00
2.12 45.75
120.75 W
1.21
121.96 X
17.13
139.09 Y
20.86
159.96 Z
1.60
161.56
161.55
Rate . Amount .
110.00 110.00
2.12 57.05
167.05 W
1.67
168.72 X
23.71
192.42 Y
28.86
221.29 Z
2.21
223.50
223.50
Rate . Amount .
275.00 275.00
2.12 68.35
343.35 W
3.43
346.78 X
48.72
395.51 Y
59.33
454.83 Z
4.55
459.38
459.40
Rate . Amount .
420.00 420.00
2.12 68.35
488.35 W
4.88
493.23 X
69.30
562.53 Y
84.38
646.91 Z
6.47
653.38
653.40
Rate . Amount .
820.00 820.00
2.12 68.35
888.35 W
8.88
897.23 X
126.06
1023.29 Y
153.49
1176.79 Z
11.77
1188.56
1188.55
Rate . Amount .
85.00 85.00
2.12 17.09
102.09 W
1.02
103.11 X
14.49
117.59 Y
17.64
135.23 Z
1.35
136.59
136.60
Rate . Amount .
65.00 65.00
2.12 14.33
79.33 W
0.79
80.12 X
11.26
91.38 Y
13.71
105.09 Z
1.05
106.14
106.15
Rate . Amount .
58.00 58.00
2.12 14.33
72.33 W
0.72
73.05 X
10.26
83.32 Y
12.50
95.82 Z
0.96
96.77
96.75
Rate . Amount .
5190.00 5190.00
145.72 14.57
546.00 546.00 A
5750.57 W
52.05
5802.62 X
738.55
6541.17 Y
899.28
7440.45 Z
68.94
7509.39
7509.40
Rate . Amount .
6200.00 6200.00
145.72 14.57
546.00 546.00 A
6760.57 W
62.15
6822.72 X
881.88
7704.60 Y
1073.79
8778.39 Z
82.32
8860.71
8860.70
Rate . Amount .
8571.00 8571.00
145.72 14.57
546.00 546.00 A
9131.57 W
85.86
9217.43 X
1218.34
10435.76 Y
1483.46
11919.23 Z
113.73
12032.96
12032.95
Rate . Amount .
9048.00 9048.00
145.72 14.57
546.00 546.00 A
9608.57 W
90.63
9699.20 X
1286.02
10985.22 Y
1565.88
12551.11 Z
120.05
12671.16
12671.15
Rate . Amount .
12400.00 12400.00
145.72 14.57
546.00 546.00 A
12960.57 W
124.15
13084.72 X
1761.69
14846.41 Y
2145.06
16991.47 Z
164.45
17155.92
17155.90
Rate . Amount .
17200.00 17200.00
145.72 14.57
546.00 546.00 A
17760.57 W
172.15
17932.72 X
2442.83
20375.55 Y
2974.43
23349.98 Z
228.04
23578.02
23578.00
Rate . Amount .
13050.00 13050.00
145.72 14.57
546.00 546.00 A
13610.57 W
130.65
13741.22 X
1853.93
15595.15 Y
2257.37
17852.52 Z
173.07
18025.58
18025.60
Rate . Amount .
18750.00 18750.00
145.72 14.57
546.00 546.00 A
19310.57 W
187.65
19498.22 X
2662.79
22161.00 Y
3242.25
25403.25 Z
248.57
25651.83
25651.85
Rate . Amount .
29.00 1450.00
784.00 784.00
714.00 714.00
645.00 645.00
3593.00 W
35.93
3628.93 X
509.86
4138.79 Y
620.82
4759.61 Z
47.60
4807.21
96.14
96.15
Rate . Amount .
33.00 1650.00
784.00 1176.00
714.00 1071.00
645.00 1935.00
5832.00 W
58.32
5890.32 X
827.59
6717.91 Y
1007.69
7725.60 Z
77.26
7802.85
156.06
156.05
Rate . Amount .
60.00 3000.00
784.00 1568.00
714.00 1428.00
645.00 2580.00
8576.00 W
85.76
8661.76 X
1216.98
9878.74 Y
1481.81
11360.55 Z
113.61
11474.15
229.48
229.50
Rate . Amount .
70.00 3500.00
784.00 1960.00
714.00 1785.00
645.00 3225.00
10470.00 W
104.70
10574.70 X
1485.75
12060.45 Y
1809.07
13869.51 Z
138.70
14008.21
280.16
280.15
Rate . Amount .
100.00 5000.00
784.00 2352.00
714.00 2142.00
645.00 3870.00
13364.00 W
133.64
13497.64 X
1896.42
15394.06 Y
2309.11
17703.17 Z
177.03
17880.20
357.60
357.60
Rate . Amount .
116.00 5800.00
784.00 2744.00
714.00 2499.00
645.00 4515.00
15558.00 W
155.58
15713.58 X
2207.76
17921.34 Y
2688.20
20609.54 Z
206.10
20815.63
416.31
416.30
Rate . Amount .
210.00 10500.00
784.00 3136.00
714.00 2856.00
645.00 5160.00
21652.00 W
216.52
21868.52 X
3072.53
24941.05 Y
3741.16
28682.20 Z
286.82
28969.03
579.38
579.40
Rate . Amount .
250.00 12500.00
784.00 3528.00
714.00 3213.00
645.00 5805.00
25046.00 W
250.46
25296.46 X
3554.15
28850.61 Y
4327.59
33178.20 Z
331.78
33509.99
670.20
670.20
Rate . Amount .
270.00 13500.00
784.00 3724.00
714.00 3391.50
645.00 6127.50
26743.00 W
267.43
27010.43 X
3794.97
30805.40 Y
4620.81
35426.20 Z
354.26
35780.47
715.61
715.60
Rate . Amount .
356.00 17800.00
784.00 5096.00
714.00 4641.00
645.00 8385.00
35922.00 W
359.22
36281.22 X
5097.51
41378.73 Y
6206.81
47585.54 Z
475.86
48061.40
961.23
961.25
Rate . Amount .
510.00 25500.00
784.00 6036.80
714.00 5497.80
645.00 9933.00
46967.60 W
469.68
47437.28 X
6664.94
54102.21 Y
8115.33
62217.55 Z
622.18
62839.72
1256.79
1256.80
Rate . Amount .
600.00 30000.00
784.00 6036.80
714.00 5497.80
645.00 9933.00
51467.60 W
514.68
51982.28 X
7303.51
59285.79 Y
8892.87
68178.65 Z
681.79
68860.44
1377.21
1377.20
Rate . Amount .
705.00 35250.00
784.00 6664.00
714.00 6069.00
645.00 10965.00
58948.00 W
589.48
59537.48 X
8365.02
67902.50 Y
10185.37
78087.87 Z
780.88
78868.75
1577.37
1577.35
Rate . Amount .
910.00 45500.00
784.00 7840.00
714.00 7140.00
645.00 12900.00
73380.00 W
733.80
74113.80 X
10412.99
84526.79 Y
12679.02
97205.81 Z
972.06
98177.87
1963.56
1963.55
Rate . Amount .
1080.00 54000.00
784.00 8624.00
714.00 7854.00
645.00 14190.00
84668.00 W
846.68
85514.68 X
12014.81
97529.49 Y
14629.42
112158.92 Z
1121.59
113280.51
2265.61
2265.60
Rate . Amount .
1310.00 6550.00
358.32 17.92
298.50 402.98 A
6970.89 W
65.68
7036.57 X
932.02
7968.59 Y
1134.84
9103.43 Z
87.00
9190.44
1838.09
1838.10
Rate . Amount .
2048.00 10240.00
597.20 29.86
298.50 659.69 A
10929.55 W
102.70
11032.24 X
1457.34
12489.59 Y
1774.49
14264.07 Z
136.04
14400.12
2880.02
2880.00
Rate . Amount .
3238.00 16190.00
971.45 48.57
298.50 949.23 A
17187.80 W
162.39
17350.19 X
2304.33
19654.52 Y
2805.79
22460.32 Z
215.11
22675.43
4535.09
4535.10
Rate . Amount .
3905.00 19525.00
1380.48 69.02
298.50 1274.60 A
20868.62 W
195.94
21064.56 X
2780.49
23845.05 Y
3385.57
27230.62 Z
259.56
27490.18
5498.04
5498.05
Rate . Amount .
4990.00 24950.00
1706.30 85.32
298.50 1641.75 A
26677.07 W
250.35
26927.42 X
3552.64
30480.05 Y
4325.75
34805.80 Z
331.64
35137.44
7027.49
7027.50
Rate . Amount .
6286.00 31430.00
2388.82 119.44
298.50 2026.82 A
33576.26 W
315.49
33891.75 X
4477.02
38368.77 Y
5451.29
43820.07 Z
417.93
44238.00
8847.60
8847.60
Rate . Amount .
8143.00 40715.00
3257.48 162.87
298.50 2489.49 A
43367.36 W
408.78
43776.14 X
5800.77
49576.92 Y
7063.11
56640.03 Z
541.51
57181.54
11436.31
11436.30
Rate . Amount .
10381.00 51905.00
3981.36 199.07
298.50 3008.88 A
55112.95 W
521.04
55633.99 X
7393.83
63027.82 Y
9002.84
72030.66 Z
690.22
72720.87
14544.17
14544.15
Rate . Amount .
12914.00 64570.00
3981.36 199.07
298.50 3504.39 A
68273.46 W
647.69
68921.15 X
9191.05
78112.20 Y
11191.17
89303.38 Z
857.99
90161.37
18032.27
18032.25
Rate . Amount .
17905.00 89525.00
5972.04 298.60
298.50 4707.35 A
94530.95 W
898.24
95429.18 X
12746.42
108175.60 Y
15520.24
123695.84 Z
1189.88
124885.72
24977.14
24977.15
Rate . Amount .
800.00 8000.00
358.32 35.83
298.50 459.69 A
8495.52 W
80.36
8575.88 X
1140.32
9716.21 Y
1388.48
11104.68 Z
106.45
11211.13
1121.11
1121.10
Rate . Amount .
1140.00 11400.00
597.20 59.72
298.50 680.58 A
12140.30 W
114.60
12254.90 X
1626.19
13881.09 Y
1980.08
15861.17 Z
151.81
16012.97
1601.30
1601.30
Rate . Amount .
1400.00 14000.00
971.45 97.15
298.50 898.49 A
14995.63 W
140.97
15136.60 X
2000.46
17137.06 Y
2435.79
19572.84 Z
186.74
19759.59
1975.96
1975.95
Rate . Amount .
1800.00 18000.00
1380.48 138.05
298.50 1173.11 A
19311.15 W
181.38
19492.53 X
2573.88
22066.41 Y
3134.00
25200.41 Z
240.27
25440.68
2544.07
2544.05
Rate . Amount .
2250.00 22500.00
1706.30 170.63
298.50 1444.74 A
24115.37 W
226.71
24342.08 X
3217.08
27559.15 Y
3917.16
31476.31 Z
300.32
31776.63
3177.66
3177.65
Rate . Amount .
2650.00 26500.00
2388.82 238.88
298.50 1970.10 A
28708.98 W
267.39
28976.37 X
3794.38
32770.75 Y
4620.10
37390.85 Z
354.21
37745.06
3774.51
3774.50
Rate . Amount .
3175.00 31750.00
3257.48 325.75
298.50 2337.26 A
34413.00 W
320.76
34733.76 X
4551.71
39285.47 Y
5542.23
44827.70 Z
424.90
45252.61
4525.26
4525.25
Rate . Amount .
3852.00 38520.00
3981.36 398.14
298.50 2728.29 A
41646.43 W
389.18
42035.61 X
5522.68
47558.29 Y
6724.50
54282.78 Z
515.54
54798.33
5479.83
5479.85
Rate . Amount .
4350.00 43500.00
3981.36 398.14
298.50 3182.01 A
47080.15 W
438.98
47519.13 X
6229.36
53748.49 Y
7584.97
61333.46 Z
581.51
61914.98
6191.50
6191.50
Rate . Amount .
5600.00 56000.00
5972.04 597.20
298.50 4137.21 A
60734.41 W
565.97
61300.39 X
8031.43
69331.81 Y
9779.19
79111.00 Z
749.74
79860.74
7986.07
7986.05
Rate . Amount .
7300.00 73000.00
5972.04 597.20
298.50 5638.67 A
79235.87 W
735.97
79971.84 X
10443.81
90415.65 Y
12716.55
103132.20 Z
974.94
104107.14
10410.71
10410.70
Rate . Amount .
9100.00 91000.00
5972.04 597.20
298.50 7268.48 A
98865.68 W
915.97
99781.65 X
12998.10
112779.75 Y
15826.69
128606.44 Z
1213.38
129819.82
12981.98
12982.00
Rate . Amount .
11800.00 118000.00
8958.06 895.81
298.50 8438.60 A
127334.40 W
1188.96
128523.36 X
16871.91
145395.27 Y
20543.50
165938.77 Z
1575.00
167513.77
16751.38
16751.40
Rate . Amount .
12300.00 123000.00
11944.08 1194.41
298.50 10393.77 A
134588.18 W
1241.94
135830.12 X
17623.81
153453.93 Y
21459.02
174912.95 Z
1645.19
176558.15
17655.81
17655.80
Rate . Amount .
765.00 7650.00
358.32 35.83
298.50 530.14 A
8215.97 W
76.86
8292.83 X
1090.66
9383.48 Y
1328.00
10711.49 Z
101.81
10813.30
1081.33
1081.35
Rate . Amount .
1150.00 11500.00
597.20 59.72
298.50 784.16 A
12343.88 W
115.60
12459.48 X
1640.38
14099.86 Y
1997.35
16097.21 Z
153.13
16250.34
1625.03
1625.05
Rate . Amount .
1575.00 15750.00
971.45 97.15
298.50 1079.08 A
16926.22 W
158.47
17084.69 X
2248.79
19333.48 Y
2738.16
22071.64 Z
209.93
22281.57
2228.16
2228.15
Rate . Amount .
2200.00 22000.00
1380.48 138.05
298.50 1432.80 A
23570.85 W
221.38
23792.23 X
3141.50
26933.73 Y
3825.14
30758.87 Z
293.26
31052.13
3105.21
3105.20
Rate . Amount .
2750.00 27500.00
1706.30 170.63
298.50 1805.63 A
29476.26 W
276.71
29752.96 X
3926.60
33679.56 Y
4781.09
38460.65 Z
366.55
38827.20
3882.72
3882.70
Rate . Amount .
3350.00 33500.00
2388.82 238.88
298.50 2379.94 A
36118.82 W
337.39
36456.21 X
4787.72
41243.93 Y
5829.60
47073.53 Z
446.94
47520.46
4752.05
4752.05
Rate . Amount .
4300.00 43000.00
3257.48 325.75
298.50 2829.78 A
46155.53 W
433.26
46588.79 X
6148.14
52736.93 Y
7486.07
60223.00 Z
573.93
60796.93
6079.69
6079.70
Rate . Amount .
5000.00 50000.00
3981.36 398.14
298.50 3312.45 A
53710.59 W
503.98
54214.57 X
7151.75
61366.32 Y
8708.08
70074.40 Z
667.62
70742.02
7074.20
7074.20
Rate . Amount .
6270.00 62700.00
3981.36 398.14
298.50 3864.98 A
66963.11 W
630.98
67594.10 X
8953.94
76548.04 Y
10902.46
87450.50 Z
835.86
88286.35
8828.64
8828.65
Rate . Amount .
7560.00 75600.00
5972.04 597.20
298.50 5035.10 A
81232.30 W
761.97
81994.27 X
10812.76
92807.04 Y
13165.79
105972.83 Z
1009.38
106982.21
10698.22
10698.20
Rate . Amount .
10500.00 105000.00
3981.36 398.14
298.50 6493.57 A
111891.71 W
1053.98
112945.69 X
14956.52
127902.21 Y
18211.30
146113.50 Z
1396.20
147509.70
14750.97
14750.95
Rate . Amount .
11350.00 113500.00
8958.06 895.81
298.50 7241.61 A
121637.42 W
1143.96
122781.37 X
16233.34
139014.71 Y
19765.97
158780.68 Z
1515.39
160296.07
16029.61
16029.60
Rate . Amount .
11450.00 114500.00
11944.08 1194.41
298.50 7972.94 A
123667.34 W
1156.94
124824.29 X
16417.61
141241.90 Y
19990.35
161232.25 Z
1532.59
162764.84
16276.48
16276.50
Rate . Amount .
13900.00 139000.00
11944.08 1194.41
298.50 9590.51 A
149784.91 W
1401.94
151186.86 X
19894.29
171081.15 Y
24223.60
195304.74 Z
1857.14
197161.88
19716.19
19716.20
Rate . Amount .
15550.00 155500.00
11944.08 1194.41
298.50 11348.67 A
168043.08 W
1566.94
169610.02 X
22235.72
191845.74 Y
27074.56
218920.30 Z
2075.72
220996.02
22099.60
22099.60
Rate . Amount .
1100.00 5500.00
358.32 17.92
298.50 325.37 A
5843.28 W
55.18
5898.46 X
783.02
6681.48 Y
953.42
7634.90 Z
73.10
7707.99
1541.60
1541.60
Rate . Amount .
1650.00 8250.00
597.20 29.86
298.50 486.56 A
8766.42 W
82.80
8849.21 X
1174.95
10024.17 Y
1430.64
11454.81 Z
109.68
11564.49
2312.90
2312.90
Rate . Amount .
2075.00 10375.00
971.45 48.57
298.50 659.69 A
11083.26 W
104.24
11187.49 X
1479.16
12666.65 Y
1801.04
14467.70 Z
138.08
14605.78
2921.16
2921.15
Rate . Amount .
2950.00 14750.00
1380.48 69.02
298.50 886.55 A
15705.57 W
148.19
15853.76 X
2102.89
17956.65 Y
2560.52
20517.17 Z
196.31
20713.48
4142.70
4142.70
Rate . Amount .
3790.00 18950.00
1706.30 85.32
298.50 1140.27 A
20175.59 W
190.35
20365.94 X
2701.21
23067.14 Y
3289.03
26356.18 Z
252.16
26608.33
5321.67
5321.65
Rate . Amount .
4780.00 23900.00
2388.82 119.44
298.50 1364.15 A
25383.59 W
240.19
25623.78 X
3408.48
29032.26 Y
4150.22
33182.48 Z
318.18
33500.66
6700.13
6700.15
Rate . Amount .
6150.00 30750.00
3257.48 162.87
298.50 1611.90 A
32524.77 W
309.13
32833.90 X
4386.69
37220.59 Y
5341.30
42561.90 Z
409.50
42971.40
8594.28
8594.30
Rate . Amount .
6453.00 32265.00
3981.36 199.07
298.50 1907.42 A
34371.48 W
324.64
34696.12 X
4606.81
39302.94 Y
5609.33
44912.27 Z
430.05
45342.31
9068.46
9068.45
Rate . Amount .
9180.00 45900.00
3981.36 199.07
298.50 2208.90 A
48307.97 W
460.99
48768.96 X
6541.69
55310.65 Y
7965.26
63275.91 Z
610.67
63886.58
12777.32
12777.30
Rate . Amount .
12150.00 60750.00
5972.04 298.60
298.50 2970.08 A
64018.68 W
610.49
64629.16 X
8663.10
73292.26 Y
10548.33
83840.59 Z
808.71
84649.30
16929.86
16929.85
Rate . Amount .
14370.00 71850.00
3981.36 199.07
298.50 3805.88 A
75854.94 W
720.49
76575.43 X
10224.12
86799.56 Y
12449.05
99248.61 Z
954.43
100203.04
20040.61
20040.60
Rate . Amount .
38.00 38.00
2.12 25.91
63.91 W
0.64
64.55 X
9.07
73.61 Y
11.04
84.66 Z
0.85
85.50
85.50
Rate . Amount .
52.00 52.00
2.12 28.66
80.66 W
0.81
81.47 X
11.45
92.92 Y
13.94
106.85 Z
1.07
107.92
107.90
Rate . Amount .
25.00 25.00
2.12 7.17
32.17 W
0.32
32.49 X
4.56
37.05 Y
5.56
42.61 Z
0.43
43.04
43.05
Rate . Amount .
50.00 50.00
2.12 7.17
57.17 W
0.57
57.74 X
8.11
65.85 Y
9.88
75.73 Z
0.76
76.48
76.50
Rate . Amount .
68.00 68.00
2.12 7.17
75.17 W
0.75
75.92 X
10.67
86.58 Y
12.99
99.57 Z
1.00
100.57
100.55
Rate . Amount .
784.00 125.44
714.00 114.24
645.00 806.25
8512.10 1787.54 A
307.25 368.70 A
2.12 34.17
2.12 17.09
3253.43 W
10.97
3264.40 X
155.70
3420.10 Y
189.58
3609.68 Z
14.53
3624.21
362.42
362.40
Rate . Amount .
784.00 650.72
714.00 592.62
645.00 1077.15
7365.15 147.30 A
2.12 256.86
2.12 85.44
2.12 45.75
2855.84 W
27.09
2882.92 X
384.35
3267.28 Y
468.00
3735.27 Z
35.88
3771.15
377.12
377.10
Rate . Amount .
784.00 196.00
714.00 178.50
645.00 645.00
8843.45 353.74 A
1373.24 W
10.20
1383.43 X
144.67
1528.11 Y
176.16
1704.26 Z
13.51
1717.77
171.78
171.80
Rate . Amount .
8843.45 1945.56 A
2.12 28.66
1974.22 W
0.29
1974.51 X
4.07
1978.58 Y
4.95
1983.53 Z
0.38
1983.91
198.39
198.40
Rate . Amount .
1800.00 14.40
784.00 258.72
645.00 844.95
2.12 20.95
1139.02 W
11.39
1150.41 X
161.63
1312.04 Y
196.81
1508.84 Z
15.09
1523.93
1523.95
Rate . Amount .
1800.00 21.60
784.00 384.16
645.00 1057.80
2.12 28.66
1492.22 W
14.92
1507.14 X
211.75
1718.90 Y
257.83
1976.73 Z
19.77
1996.50
1996.50
Rate . Amount .
1800.00 32.40
784.00 517.44
645.00 1270.65
2.12 38.03
1858.52 W
18.59
1877.11 X
263.73
2140.84 Y
321.13
2461.97 Z
24.62
2486.59
2486.60
Rate . Amount .
1800.00 48.60
784.00 642.88
645.00 1483.50
2.12 48.51
2223.49 W
22.23
2245.72 X
315.52
2561.24 Y
384.19
2945.43 Z
29.45
2974.89
2974.90
Rate . Amount .
1800.00 84.60
784.00 901.60
645.00 1902.75
2.12 66.70
2955.65 W
29.56
2985.20 X
419.42
3404.62 Y

Dar 2021 in Excel

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dar 2021 in Excel

Uploaded by

Copyright:

Available Formats

READ ME

Analysis of Rates for Delhi 2021 is published by Central

CELL A 1 : H 81375 Is locked for editing

ANALYSIS OF RATES FOR DELHI 2021

2.1 Earth work in surface excavation not exceeding 30 cm in

2.1.1 All kinds of soil

2.2.1 All kinds of soil

2.3 Banking excavated earth in layers not exceeding 20 cm in

2.3.1 All kinds of soil

Code Description Unit Quantity

Code Description Unit Quantity

2.6 Earth work in excavation by mechanical means (Hydraulic

2.6.1 All kinds of soil

2.7 Earth work in excavation by mechanical means (Hydraulic

2.7.1 Ordinary rock

2.7.2 Hard rock (requiring blasting)

2.8 Earth work in excavation by mechanical means (Hydraulic

2.8.1 All kinds of soil.

2.9 Excavation work by mechanical means (Hydraulic excavator)/

2.9.1 Ordinary rock

2.9.2 Hard rock (requiring blasting)

2.9.3 Hard rock (blasting prohibited)

2.10.1 All kinds of soil

say 40mm. Slope assumed 1 in 200.

say 200mm. Slope assumed 1 in 200.

say 450mm. Slope assumed 1 in 200.

1.20m, Average depth = (1.50+1.20)/2 = 1.35, Width = 0.40

+ 0.45 = 0.85 m, 60x0.85x1.35 = 68.85 cum, 5% for collars

Code Description Unit Quantity

say 200mm (rate in percentage), Slope assumed 1 in 200.

100x0.60x1.75 = 105.00 cum, 200x0.60x2.00 = 240.00

Code Description Unit Quantity

2.13 Excavating trenches of required width for pipes, cables, etc,

2.13.1 Ordinary rock :

2.13.2 Hard rock (requiring blasting)

2.13.3 Hard rock (blasting prohibited)

2.14 Extra for excavating trenches for pipes, cables, etc. in

Code Description Unit Quantity

2.15 Extra for excavating trenches for pipes, cables, etc. in

Code Description Unit Quantity

2.16 Close timbering in trenches including strutting, shoring and

2.16.1 Depth not exceeding 1.5 m

after use of material credit is given @ 75% of cost

2.16.2 Depth exceeding 1.5 m but not exceeding 3 m

after use of material credit is given @ 75% of cost

2.16.3 Depth exceeding 3 m but not exceeding 4.5 m

after use of material credit is given @ 75% of cost

2.17 Close timbering in case of shafts, wells, cesspits, manholes

2.17.1 Depth not exceeding 1.5 m

after use of material credit is given @ 75% of cost

2.17.2 Depth exceeding 1.5 m but not exceeding 3 m

after use of material credit is given @ 75% of cost

2.17.3 Depth exceeding 3 m but not exceeding 4.5 m

after use of material credit is given @ 75% of cost

2.18 Close timbering over areas including strutting, shoring and

2.18.1 Depth not exceeding 1.5 m

after use of material credit is given @ 75% of cost

2.18.2 Depth exceeding 1.5 m but not exceeding 3 m

after use of material credit is given @ 75% of cost

2.18.3 Depth exceeding 3 m but not exceeding 4.5 m

after use of material credit is given @ 75% of cost

Code Description Unit Quantity

before = 51 - 6.37 = 44.63 m

2.20 Open timbering in trenches including strutting and shoring