Professional Documents
Culture Documents
Byjus Science
Byjus Science
Ta
ba
hi
Te
nt
hi
es
on
Te
le
gr
am
@
Ta
ba
hi
Te
nt
hi
es
on
Te
le
gr
am
@
Ta
ba
hi
Te
nt
hi
es
on
Te
le
gr
am
4
1. Introduction
(Refer to video: Introduction)
a. Electric Charges
am
Question1. What do you think electrical energy actually is? For what do you pay your electricity bill?
gr
le
Te
Whole story of electricity and magnetism essentially begins with another property of matter other
than “mass”. And that is “charge”. But charge has some totally different characteristics than mass
like:
on
Mass exist in only one type whereas charge exists in two variants and we named them
“positive charge” and “negative charge”.
Mass always exists on a body but charge may or may not be there on the body.
es
Masses always attract (Gravitational Force) whereas charges can attract as well as repel
(Electrostatic force).
hi
We also know that the origin of these charges is protons and electrons. Protons are well bounded
nt
to the nucleus and they never leave the atom while electrons can jump around, in and out of the
atom.
Te
hi
ba
Ta
Charge on 1 electron, = =
Charge on 1 proton, = =
am
gr
Electricity is the set of physical phenomena associated with the presence and flow of electric
charge. And in almost all of the cases these moving charges are electrons. Simply put, electricity
le
is the flow of charges/electrons.
Te
b. Electric Current
We have not yet defined any quantity to compare how “powerful” one source of electricity is
with respect to the other. So let’s define one. on
Electric current is expressed as the amount of charge flowing through a particular area
in unit time.
es
hi
Direction of the flow of positive charges is taken as the direction of current. Hence, the
Te
direction of flow of current is opposite to the direction of flow of electrons as electrons are
negatively charged.
hi
ba
Ta
@
Question3.If electrons flow from the black body to the gray body through a copper wire in 8
seconds, what is the amount of current flowing in the copper wire in that time interval?
am
gr
le
Te
on
Question4.The direction of current is opposite to the direction of flow of electrons. So does this mean
current is a vector quantity? Why / Why not?
es
hi
nt
Te
hi
Now that we have defined current as the rate of flow of charge, let’s deal with this question,
“Why should a charge flow?”
@
Charge is a property on a particle and Newton’s first law says that any particle shouldn’t move
from rest unless an unbalanced external force is applied. So if charges move, the force must be
unbalanced electrostatic force (or Coulomb force). And any charge will feel an unbalanced force
if concentration of the charge is different around it.
Potential is the electrical state of a conductor, which determines the direction of flow of charge
when two conductors are either kept in contact or joined by a metallic wire.
The potential at a point is defined as the amount of work done in bringing a unit positive
charge from infinity to that point. Potential is a scalar quantity and its unit is volts (V). The
body having an excess of electron is said to be at a negative (or lower) potential, while the one
having a deficit of electrons is said to be at a positive (or higher) potential.
am
gr
Figure 3: Potential at Point X
le
Te
Did You Know?
Alessandro Volta was the one who discovered that when two strips of different
metals were placed in sulfuric acid and connected through a simple wire,
on
electricity flowed. Thus, he invented the first electric battery.
es
hi
nt
The potential difference between two points in an electric circuit is the work done when a
unit coulomb of positive charge passes between the two points.
hi
Question 5.A charge of 2C moves between two plates maintained at potential difference of 10V.
What is the energy acquired by the charge?
am
gr
le
b. Combination of Batteries
Te
Batteries can either be connected in series or in parallel. When batteries are connected in series
with each other (and they are all connected in the same direction), the total potential difference
on
supplied to the circuit is equal to the individual potential differences added together.
es
When batteries are connected in parallel with each other the total potential difference supplied to
the circuit is equal to the potential difference of strongest (highest p.d.) battery.
hi
nt
Question 6.A combination of batteries is shown below. What will be the equivalent potential
difference if the potential difference of each individual battery is 2 V?
Te
hi
ba
Ta
@
Now that we have defined what an electric current is, let’s look into how the electrons flow to
constitute an electric current inside the conductor. Before a potential difference is applied across
am
the conductor, the outermost electrons in the atoms chaotically and randomly move in the space
between the atoms of that material. As a result there is no net movement of these electrons and the
current is zero.
gr
When we apply a potential difference across the conductor, the electrons start drifting from
negative terminal of the battery to the positive terminal through the conductor. This is known as
le
drift velocity. The drift velocity of electrons is about 1 cm/s.
Te
on
es
hi
nt
Current can be of two types: Direct Current (DC) or Alternating Current (AC).
ba
Question 7.How is it so that a bulb glows as soon as it is switched on; though the electrons drift at a
speed of about 1 or 2 cm/s?
am
gr
le
b. Electric Circuit Elements
Te
Now that we have the concept of electric current, potential difference and electrical circuits, it is
important to have some way to conveniently represent the circuits. For this we represent different
components of the circuit using symbols. on
es
hi
nt
Te
hi
4. Ohm’s Law
(Refer to video: Ohm’s Law)
Ta
Ohm’s law states that the current flowing through a metallic conductor is proportional to the
potential difference applied across its ends, provided the temperature and all other conditions
remain constant.
VI
Or,
Where is the resistance, a constant for a circuit, which is defined as the hindrance to the flow of
charge or electric current. Resistance is represented by the letter “R” and is measured in ohms
(Ω).
Acceleration is the effect of the force and mass the quantity that reduces it.
am
Current is the effect of potential difference and resistance is the quantity that reduces it.
gr
le
Te
on
es
Clarification: Not all conductors obey Ohm’s Law. There are certain
conductors called non-ohmic resistors whose V-I curve is non-linear.
Te
Question 8.A battery is connected to a bulb of resistance, R. If 180C of charge is passed through the
bulb in 1 minute and 1080J of work was done, what is the value of R?
am
gr
le
Te
b. Factors Affecting Resistance
As it turns out the resistance of a wire (the ability of the wire to oppose current) doesn’t only
on
depend upon the material of the wire but also on its dimensions.
Where, ρ (rho) is the proportionality constant. It is called the “electrical resistivity” of the
conductor and it depends upon the nature of the material. The SI unit of resistivity (ρ) is Ω m.
hi
Question 9.Resistance of a conductor also increases linearly with the temperature. Why and how does
this happen?
ba
Ta
@
Question 10.A wire has a diameter of 0.5 mm and a resistivity of Ω cm. How much of this
wire would be required to make a 10 Ω coil?
am
gr
le
5. Resistance of System of Resistors
(Refer to video: Resistance of System of Resistors)
Te
a. Series Combination
their resistance. That is, more the value of resistance, more voltage drop it will have
across it.
nt
Te
hi
ba
b. Parallel Combination
am
gr
Figure 8: Parallel Combination of Resistors
le
Te
on
Did You Know?
Below is the flow chart of typical energy conversion in case of a simple circuit.
am
gr
le
Te
on
es
hi
In the numerical question regarding this topic, questions asked will look something like this:
hi
“calculate the heat generated by the circuit” or “calculate the work done by the circuit” or
“calculate the loss in electrical energy”. Just remember that all the three statements are referring
ba
The S.I. unit of both Energy and Work done is Joule (J).
@
Question 12.An electric heater of resistance 8Ω draws 15 C of charge per second. Suppose it happens
for a period of 2 hours, calculate the amount of heat energy derived by the heater.
am
gr
le
Electrical energy is nothing but kinetic energy of electrons.
Te
Misconception: Many people think that electrons are consumed in an electric
circuit. This is wrong! on
Clarification: We pay the electricity board or electric company to provide
energy to move electrons through the electric gadgets like electric bulb, fan and
engines which use kinetic energy of electrons to do some work.
es
7. Electric Power
hi
a. Series Combination
Te
Rate of work done is defined as Power. This is also the rate of consumption of energy. So, electric
power is the electrical work done per unit time.
hi
ba
Since electrical energy is the product of Power and time, it can be expressed in Watt-hour (W-h).
One Watt-hour is the energy consumed when 1 watt of power is used for 1 hour. The commercial
unit of electric energy is kilowatt-hour (kWh).
@
Question 13.Calculate the power loss in an electrical transmission cable, 15 km long, carrying a
current of 100A at a potential of 200 kV. The resistance per km of the cable is 0.2 Ω.
am
gr
le
Te
Question 14.All the bulbs (A-H) are identical. Rate them in decreasing order of brightness.
on
es
hi
nt
Te
hi
ba
Ta
@
1) Give Reasons:
A) Why and how do the electrons flow in a wire when a potential difference is applied across it?
B) Ammeter burns out whenever it is connected in the parallel to the circuit. Why?
2) Answer the following:
A) In a lab experiment, I attached the voltmeter in series and found ammeter reading is always
showing zero. How would you explain that?
am
B) It takes 45 J of energy to bring ‘n’ electrons from point 1 to point 2 having a potential
difference of 15 V. Calculate the value of ‘n’.
3) The values of current ‘I’ flowing in a given resistor for the corresponding values of potential
difference ‘V’ across the resistor are given below.
gr
I (Current ) 0.5 1.0 2.0 3.0 4.0
V (P.D.) 1.6 3.4 6.7 10.2 13.2
le
Plot V-I graph to show that Ohm’s law is correct. Also calculate the resistance in the circuit.
4) Answer the following:
Te
A) Resistance of a wire is ‘R’. Now a new wire made up of same material and has same
thickness but twice the length of original wire is taken. What is the resistance of the new
wire?
B) Two wires of equal cross sectional area, one of copper and other of manganin have same
on
resistance. Which one will be longer?
5) Derek was giving electricity exam and one of the questions was “Three resistors of resistance 4Ω,
8Ω and 12Ω are connected in parallel. Find the equivalent resistance.” He calculated using the
es
formula and got the answer as 6Ω. He immediately knew that he did some mistake in the
calculation. How could he possibly know that?
6) Calculate current flowing in each of the resistors in the circuit given below:
hi
nt
Te
hi
ba
7) A wire having resistance R is cut into 4 equal parts. Make various combinations of these 4
resistors to show which system of resistors will have highest and lowest value of resistance. Also
calculate the ratio of highest to lowest resistance.
Ta
8) Derek recently found that electricity is the movement of electrons in the wire. And he already
knows that everything is made up of atoms. But he couldn’t understand how this process can give
off light like in case of a bulb. How will you explain it to him at the atomic scale?
@
11) If in a circular circuit the current flows in the clockwise direction then what is the direction of the
flow of positive charges.
am
gr
A) Clockwise C) None of these
D) Can’t say
le
B) Anticlockwise
12) Which of the following statements does not represent ohm's law?
Te
A) Current / Potential Difference = Constant
B) Potential Difference / Current = Constant
C) Potential Difference = Current x Resistance
D) Current = Resistance x Potential Difference on
13) If two points are maintained at 5V potential each and a resistor of 10 ohms is connected across
them, what is the current across them?
A) 0.5 A C) Zero
B) 50 A D) Infinity
es
14) On which of the following does resistivity of a material depends ?
A) Nature of material C) Both A and B
hi
earth are maintained at a potential difference of 10,000 volts, find the energy (in J) received by
India in 5 days. Given India receives 10 % of the energy received by the face of the earth.
Te
SOLUTION
2. a) Voltmeter has hypothetically infinite resistance
ba
b) 1.875 x 1019
3. a) Almost a straight line
b) 3.33 Ω
Ta
9. a) 200/11 A
b) 12.1 Ω
c) 8 kWh
11. A
12. D
13. C
14. C
15. B
1. Introduction
(Refer to video: Field and Field Lines)
am
Question 1.Magnets, like every other thing, are made up of atoms. So, why do they behave differently
from other objects as in the case of attracting and repelling one another as well as in attracting
iron?
gr
le
Te
Magnets have always been a thing of awe, use and attraction for humans. According to the
history, the ancient Greeks discovered the uses of magnets during the period of Greek
on
Civilization. Chinese sailors employed magnets as navigational compasses approximately 900
years ago. Today, magnets play an increasingly important role in our everyday lives. Electric
motors, electric generators, television sets, speakers and computer hard drives all utilize magnetic
es
If you keep a small magnetic needle near a bar magnet, the magnetic needle will rotate and stop in
one particular direction. If you place the needle at some other position, it will again align in some
Ta
other particular direction. This shows that a there is a net force that acts on the magnetic needle,
rotating it in some particular direction.
@
The region around the magnet where the magnetic needle experiences a force and aligns in a
specific direction is called a magnetic field. It is a vector quantity having both magnitude and
direction. The direction of magnetic field is represented by magnetic lines of forces.
am
gr
Figure 1: Magnetic Field Lines Due to a Bar Magnet
le
Question 2.Why does a magnetic bar hung from a string always comes to rest in North-South
direction?
Te
on
es
It is important to note that the magnetic field lines are imaginary lines. They are used to help us
visualize the magnetic field and they also provide a measure of the strength of the magnetic field.
Some of the properties of magnetic field lines are:
Te
lines.
Two magnetic field lines never intersect each other.
ba
Question 3.Suppose you have two iron bars that look alike but one of them is a bar magnet. How can
you determine which one of them is a magnet? Which one did you make use of, attraction or
Ta
repulsion?
@
am
Now we are going to discuss in details the magnetic effects of electric current.
gr
2. Magnetic field due to a current carrying wire
le
(Refer to video: Magnetic Field Due to a Current Carrying Wire)
Te
a. Straight Current Carrying Wire
If an electric current is made to flow through a wire, magnetic field is produced around it. To see
this, you can take a conducting wire (like copper). Now with the help of connecting wires attach
on
this to the two ends of a battery. Keep a magnetic needle parallel to the conducting
copper wire as shown in figure. When the circuit is complete the magnetic needle shows some
deflection.
es
hi
nt
Te
Thus, magnetic field is an effect of flow of the electric current through a conducting wire. In the
year 1820 a scientist from Denmark named H.C. Oersted observed this effect for the first time and
ba
he found that the strength and the direction of magnetic field produced depends on the magnitude
and direction of current.
Ta
@
am
Did You Know?
Heat and the earth’s spin keep the outer core moving. This movement
causes electrical currents in the core, which is mostly iron. The electrical
gr
currents create a magnetic field that extends into space. On average about
every 300,000 years the earth's magnetic field reverses itself! Amazing,
le
isn’t it?
Te
on
b. Right Hand Thumb Rule
es
hi
nt
Te
hi
ba
This rule is also known as Maxwell’s Corkscrew Rule. Assume that the current carrying
conductor is held in the right hand so that our fingers wrap around the conductor and the thumb is
stretched in the direction of current, then the wrapped fingers will show us the direction of
@
am
gr
We know about the magnetic field lines due to a straight current carrying wire. But how will the field
le
lines differ if the wire is closed in the form of a circular loop?
Te
c. Magnetic Field Due to a Current Carrying Circular Loop
Every point on the wire carrying current would give rise to the magnetic field appearing as
straight lines at the center of the loop. By applying the right hand rule, it is easy to check that
on
every section of the wire contributes to the magnetic field lines in the same direction at the center
of the loop.
es
hi
nt
Te
hi
When instead of a single loop, a number of turns of wire is used, it is known as a solenoid. If
current is passed through the coils of a solenoid, it behaves as a temporary magnet known as
electromagnet.
Ta
d. Electromagnet
An electromagnet is a temporary magnet made from a piece of soft iron in which magnetic field is
@
produced by the flow of electric current in the coil wrapped around it.
For making electromagnet, take a piece of paper and give it a cylindrical shape. Make several
turns of a copper wire over this from one end to the other end. This is solenoid. When the ends of
the copper wires are attached to the ends of a battery, current starts flowing through the coil and it
starts functioning as a bar magnet. When the flow of current is stopped from the battery, then, its
magnetic property ceases. If the +ve and –ve terminals of the battery are reversed, then the poles
of the magnet are also reversed.
am
gr
le
Figure 6: Magnetic Field due to an Electromagnet
Te
Question 5: How placing an iron core in a solenoid can increase the strength of an electromagnet?
on
es
hi
nt
Te
The rod of soft iron placed inside the solenoid would behave like an ordinary bar magnet when
the current is switched on. The polarity of this electromagnet can be described by the right-hand
grip rule. If you grip the solenoid so that your fingers curl around in the direction of current flow
through the turns of the solenoid, your thumb will point to the “North” pole of the electromagnet.
am
Did You Know?
The high-speed maglev trains are developed using electromagnets. These
trains float over a guide way using basic principles of magnets; hence
gr
replacing the traditional steel wheel and track system. Instead of
using fossil fuels, the magnetic field created by the electrified coils in the
guide way walls and the track combine to propel the train.
le
Te
on
3. Force on a current carrying conductor in a magnetic field
(Refer to video: Force on a Current Carrying Conductor in a Magnetic Field)
es
a. Straight Current Carrying Wire
You have seen earlier that, when current flows through a conductor, magnetic field is produced
hi
around it. The direction of this field (B) depends upon the direction of flow of electric current (I).
Similarly when a current carrying conductor is placed in some external magnetic field, a force
nt
acts upon it. The following experiment may be done to observe this.
Let us suspend a piece of copper wire between the poles of a horseshoe magnet in such a manner
that the length of the wire is aligned perpendicular to the direction of magnetic field between the
Te
poles. As soon as current is allowed to flow through this wire it becomes taut upwards. With this
becomes clear that a force acts on the current flowing conductor.
hi
ba
Ta
@
This force acts on the wire upwards. If the current flowing through the conductor is increased then
the force also increases. The direction of force acting on a current carrying conductor placed in a
magnetic field can be found according to the Fleming’s left hand rule.
am
gr
le
Te
on
es
hi
nt
some angle other than 90°(except when it is parallel or anti-parallel to it, i.e.
ba
John Ambrose Fleming gave this rule in the late 19thcentury as a simple way to work out the
Ta
c. Electric Motor
@
An electric motor converts electrical energy into mechanical energy. The working of an electric
motor is based on the fact that when a current is passed through a conductor placed suitably in a
magnetic field, it experiences a force.
i) Construction:
Question 8.Main components of electric motor are given below. Write down their uses.
Armature
am
Field Magnet
gr
Split Ring
Commutator
le
Te
Brushes or
Sliding
Contacts
Battery
on
es
hi
nt
Te
hi
ba
ii) Working:
The working of an electric motor can be divided into two parts:
Let us suppose that the battery sends current to the armature in the clockwise direction as seen
@
from above. Applying Fleming’s Left-Hand Rule, we find that the arm AB experiences a
force, which is acting downwards and perpendicular to it and arm CD experiences a force,
which is acting upwards and perpendicular to it. These two forces form a couple, and make
the armature rotates in the anti-clockwise direction.
After the armature has completed half a revolution the direction of current in the arm BA and
CD is reversed. Now arm CD experiences a downward force and arm BA experiences an
upward force. The armature thus continues to rotate about its axis in the same anti-clockwise
direction.
Question 9: When the loop becomes perpendicular to the magnetic field, no current flows through it
momentarily as the brush loses contact with the split rings. Then why doesn’t the motor stop in
this position?
am
gr
le
Question 10: Can you suggest some ways by which speed of the motor can be increased?
Te
on
es
hi
nt
4. Electromagnetic Induction
(Refer to video: Electromagnetic Induction)
am
it moves. But this time, instead of giving electricity to the wire, just move it near the magnet, does
electric current get produced in the wire? And the answer is “yes”.
gr
le
Te
on
es
Figure 10: Electromagnetic Induction
hi
Michael Faraday gave this theory of electromagnetic induction (EMI) in 1831.It is the production
of an electromotive force across a conductor exposed to time varying magnetic fields. Generators,
nt
Misconception: Current is produced only when the magnet moves away from
or towards the solenoid.
Clarification: It is the relative motion between the solenoid and magnet,
which produces a current, irrespective of whether the magnet moves or the
solenoid moves.
Just as there is Fleming’s Left hand Rule to determine the direction of force, Fleming’s Right
Hand Rule is used to determine the direction of current in case of EMI.
am
direction in which it gets produced. Lenz’s law can be stated as “Because of the change in
magnetic field near a conductor, an e.m.f. is induced in the conductor and the polarity of the
induced e.m.f. is such that it produces a current whose magnetic field opposes the initial change
gr
which produces it.
le
Te
on
es
hi
nt
c. Electric Generator
Electric Generator is a device that converts mechanical energy to electrical energy.
Generators are of two types:
hi
A.C. Generator (Alternating Current Generator): This produces current that flows in such a
manner that its direction and amplitude change constantly with time.
ba
D.C. Generator (Direct Current Generator): This generator produces current that flows in the
same direction in a continuous manner.
Ta
@
i) A.C. Generator
am
gr
le
Te
on
Figure 12: An A.C. Generator
es
Question 12: Can you explain the working of A.C. generators for both the half rotations?
hi
am
gr
le
Te
Figure 13: A D.C. Generator
on
Question 13: Give a comparative analysis of differences and advantages of both A.C and D.C.
es
hi
nt
Te
hi
So we have seen how electricity is generated using AC and DC generators. However we use AC
for power generation. This is because generating and transporting AC across long distances is
relatively easy. At high voltages, less energy is lost in electrical power transmission. The voltage
level of AC can easily be changed using transformers.
Question 14: What steps would you take, if you had to increase the current output of your electrical
generator?
am
gr
le
5. Domestic Circuits
Te
(Refer to video: Domestic Circuits)
plants. The voltage is stepped down to 220 V by transformers in a number of steps when it is
delivered to our homes. Two wires from the poles come to our houses: one wire is called as
nt
‘phase’ while the other one is called as ‘neutral’. In the phase wire the voltage is 220V while in
the neutral the voltage is zero; same as that of the earth.
Te
Question 16: The electrical appliance is connected between the live and neutral wires. Then why
there is a third earth wire? What purpose is served by it?
am
gr
le
Te
on
es
These wires (phase, neutral and earth wires) are color coded so that they can be easily identified.
nt
b. Color Coding
The color-coding of wires for domestic circuits is given by:
Te
If the live and neutral wires come in direct contact or they find some low resistance path, which in
turn bypasses the electrical appliance and a large amount of current starts to flow in the circuit.
This condition is known as short circuit.
@
In house hold circuits we use parallel combination of different appliances. Whenever a new
apparatus is switched on, it draws more current from the source. If the current drawn by all the
devices connected in a circuit is more than the maximum current rating for the given circuit, a
phenomenon called overloading will occur.
If any such condition takes place, there is a probability of overheating, fires and other related
damages. To prevent such damages from happening, we use certain safety devices and means.
One such device is an electrical fuse.
Question 17: How does a fuse prevent possible damage in case of overloading or short circuit? Why
is it always connected to the live wire?
am
gr
le
Question 18: Suppose you have two fuses of rating 5 A and 15 A. What will be the rating of the
Te
combination if they are connected i) in series ii) in parallel?
on
es
hi
nt
Using our natural resources we produce this electrical energy. Population growth, growing
urbanization is increasing the demand of electricity day by day. This is creating a pressure on our
Te
natural resources. Thus it is important today that we use electricity judiciously and not waste it in
any way.
hi
ba
Ta
@
am
4) Lets say a laboratory room has very strong upward magnetic field i.e. towards the ceiling. An
electron gun is fired along a line from one of the vertical wall to the opposite wall. Explain what
will happen to the electrons?
gr
5) What is the difference between “Right hand thumb rule” and “Fleming’s left hand rule”?
6) With a neat diagram, describe the working of electric motor.
le
7) What is the principle of electromagnetic induction? Explain how do we use this principle in our
day-to-day life.
Te
8) Suppose behind your house you have a very fast and continuous flow of water. How will you use
this to provide electricity to your home? Explain in detail.
9) What are the differences between alternating and direct current? Explain which one is better in
different scenarios. on
10) What is “Earthing”? What is the need for it? What is the color of earthing wire?
11) The ways by which the magnetic field of a solenoid can be made stronger are?
A) The number of turns of the solenoid is increased.
es
D) Both A and B
12) Two parallel wires are carrying electric currents of equal magnitude and in the same direction.
nt
They exert:
A) A rotational torque on each other C) No force on each other
Te
rating of 5A?
A) Zero C) 6 A
B) 5 A D) Anything above 5 A
SOLUTION
11. D 13. B 15. C
12. D 14. A
1. Introduction
am
In this chapter, you will not be learning about the laws of physics as such; rather we will be
learning how we make use of those laws of physics on the resources that have been given to us by
the nature. That is this chapter will be more focused on “applied science” and not on “pure
gr
science”.
Question 1.What do you think “energy” is? Why do people say, “Conserve energy” even though we
le
know that energy is always conserved?
Te
on
es
hi
So basically to do some work, you must have some kind of energy. The SI unit of energy is Joule
(J). But for commercial purposes we use kilowatt-hour (kWh) as the unit of energy.
nt
Question 2.Why don’t we use Joule as commercial unit? How many Joules will make up 1 kWh?
Te
hi
ba
Ta
@
But, this chapter is not about energy; it is about “sources of energy”, that is the resources that we
use to produce energy to meet our day-to-day needs.
am
Figure 1: Some Sources of Energy
gr
There can be good sources of energy as well as bad sources of energy depending upon how much
effort is needed to produce the energy and how much energy are we getting in return as well as on
le
some other factors.
Te
A good source of energy should be:
Fuels are the most common type of sources of energy that we see in our daily life. A fuel is
any substance that can be burnt to produce heat energy. But similarly like other sources of
hi
About 5,000 years ago, the energy people consumed for their survival
averaged about 12,000 kilocalories per person each day. In AD 1400, each
@
Renewable sources of energy are those, which are almost inexhaustible i.e. which can be replaced
easily as we use them and can be used to produce energy again and again. Almost all the major
sources of energy except for fossil fuels are renewable. Renewable energy is generally collected
from resources, which are naturally replenished, on a human timescale such as sunlight, wind,
am
rain, tides, waves, and geothermal heat.
gr
le
Te
on
es
hi
Question4. Explain the concept of renewable energy resources with the help of an example.
Te
hi
ba
Ta
Non-renewable sources of energy are those, which are exhaustible and cannot be replenished
@
once they have been used or will only get replenished after insurmountable amount of time.
The major example of non-renewable sources of energy is fossil fuels. And they are found in
nature as natural gas, petroleum and coal.
am
gr
le
Te
on
Figure 3: Non-renewable Sources of Energy
Question 5.What are the some advantages of using renewable energy sources over non-renewable
es
energy sources?
hi
nt
Te
hi
Nuclear energy can be put into any of the above two categories as some conditions make it
ba
renewable and others makes it non-renewable. But if you had to choose only one in the exams,
choose nuclear energy as a non-renewable source.
Ta
Question 6.Give some arguments for nuclear energy being a renewable source of energy and also for
nuclear energy being a non-renewable source of energy.
@
am
gr
3. Conventional and Non-Conventional Sources
le
We can also categorize sources of energy based on how much time we have been using it for our
Te
purposes.
Question 7. Write down the difference between conventional and non-conventional sources of energy.
on
es
hi
nt
Now we will go into each individual major source of energy and we will divide that into
Te
conventional and non-conventional sources. For each sources of energy you have to understand 3
basic things.
hi
Fossil fuels are the remains of prehistoric plants and animals, which got buried deep inside the
earth millions of years ago due to some natural processes. The harder parts of organisms after
their death, settle down and are covered by sediments and subjected to extreme pressure and
temperature of the earth which converts them into fossil fuels, the process being referred to as
fossilization. Hence whatever fossil fuel we have is the result of million years of decay of species,
which lived long before us e.g. dinosaurs.
Large amount of fossil fuels are burnt every day in power stations to heat up water to produce
steam, which further rotates the turbine to generate electricity. The transmission of electricity is
more efficient than transporting coal or petroleum over the same distance. That is why in this
chapter we will see that whichever type of energy the source is giving us, we will try to convert it
am
into electrical energy.
gr
le
Te
on
es
hi
nt
Question 8.Write down the advantages and disadvantages of using fossil fuel as a source of energy.
hi
Advantages:
ba
Ta
@
2. Hydro Energy
Disadvantages:
am
gr
le
Te
Did you know?
on
80% of all the electrical energy generated in India comes from fossil fuels.
Coal alone contributes for 69% of total electricity. Oil contributes for 1%
es
and natural gases contribute 10% of the total.
hi
nt
Te
Question 9.Why are we so obsessed about using every source of energy to produce electricity? What
are the advantages of it? Why not convert it into some other form of energy?
hi
ba
Ta
@
Since ancient times, we have been using the running water of the river for various purposes. But
since the discovery of Electromagnetic Induction by Michael Faraday in 1831, we have been
using the flow of river mainly to generate electricity in hydel power stations, which has huge
dams built around it to obstruct the flow of the river.
When the water flowing in a river is stored in a high-rise dam and allowed to fall from the top of
the dam, the water rushes down with a great force, which can be utilized to rotate large water
turbines. These turbines are connected with electric generators, which generate electricity. The
electricity generated in this process is termed as hydroelectricity. In fact the process involves
transformation of potential energy of water into kinetic energy and then into electric energy.
am
gr
le
Te
on
Figure 5: Hydel Power Plant
es
Question 10.Write down the advantages and disadvantages of using flowing water from river as a
hi
source of energy.
Advantages:
nt
Te
hi
ba
Ta
Disadvantages:
@
am
archaeological and historic sites were also submerged and lost.
gr
le
Te
iii. Biomass
When biomass undergoes anaerobic decomposition i.e. bacteria breaking down organic matter
hi
into its components in the absence (or very small amount) of air, then a gas called biogas is
produced which is an excellent fuel.
nt
Te
hi
ba
Ta
@
Question 11.Write down the advantages and disadvantages of biomass as a source of energy.
Advantages:
am
gr
le
2. Hydro Energy
Te
(Refer to the video: Hydropower Plants)
Disadvantages:
on
es
hi
nt
Windmills have been in use since 2000 B.C. and were first developed in Persia and China.
hi
Ancient mariners sailed to distant lands by making use of winds. Farmers used wind power to
pump water and for grinding grains. Today the most popular use of wind energy is converting it to
ba
electrical energy to meet the critical electrical energy needs of the planet.
A windmill is a large fan having big blades, which rotate by the force exerted by moving wind on
Ta
them. These blades remain continuously rotating as long as wind is blowing and can be used to
drive a large number of machines like water pumps, flourmills and also generators.
@
Question 12.Write down the advantages and disadvantages of producing electricity from a wind
energy farm.
Advantages:
am
gr
le
Disadvantages:
Te
on
es
hi
nt
Te
mega watts of global capacity were generated. A single mega watt is enough to
power 250 homes. The most installed capacity of wind energy is in Germany
followed by Spain. If this growth momentum is sustained, wind energy will be
Ta
Solar cooker
A solar cooker is a device, which utilizes solar energy for cooking food material. It consists of an
insulated wooden box painted black from the inside. The lid of the box is provided with a plane
mirror reflector and a glass sheet. The food to be cooked is placed in a metal container, which is
painted with black from outer side and kept in the box. The container is covered with the glass
am
sheet. The box is then kept in direct sunlight and its reflector is adjusted in such away that a
strong beam of sun light falls over it.
gr
le
Te
on
Figure 8: A solar cooker
es
Solar cell
hi
A solar cell is a device, which converts solar energy (light energy) directly into electricity. It is
made of semi-conducting material like silicon, germanium, selenium, orgallium. A modern solar
nt
cell is made from wafers of semi conducting materials containing impurities in such a way that a
potential difference gets generated when light falls on them. A 4 cm, 2 solar cells produce a
Te
potential difference of about 0.4 - 0.5 Volts and generate about 60 mili-amperes of current. To
generate a large amount of current a number of solar cells are arranged together in a definite
hi
pattern in a solar panel. The energy (electric current) generated in a solar panel is stored in a
ba
Question 13.Write down the advantages and disadvantages of using solar energy to meet our needs.
Advantages:
am
gr
le
(Refer to the video: Hydropower Plants)
Disadvantages:
Te
on
es
hi
nt
Te
There are three common ways in which we harness the heat and kinetic energy of the water of the
sea which are discussed as follows:
ba
The energy available due to the temperature difference between the deeper levels and surface of
Ta
an ocean is called as ocean thermal energy. OTEC uses this temperature difference to generate
electricity by exchanging heat with the warm water from the ocean surface and with the cold
@
The rise of ocean water due to attraction of the moon and sun is referred to as high tide and its fall
as low tide. The enormous movement of water due to high and low tide provide a large amount of
energy known as ocean tidal energy. This tidal energy can be utilized by constructing a tidal
barrage or dam. And just like in the case of normal dams, we can produce electricity out of it.
The energy obtained from the high-speed sea waves is referred to as sea wave energy. In fact
these high-speed sea waves have a lot of kinetic energy associated with them, which can used to
drive dynamos, which convert kinetic energy into electrical energy.
am
gr
le
Te
on
es
Question 14.Write down the advantages and disadvantages of harnessing energy from the sea by its
waves, tides or its thermal energy.
Advantages:
am
gr
le
Disadvantages:
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Geothermal energy is generally referred as the heat of the earth and is the naturally occurring
thermal energy found within rock formations and the fluids held within those formations.
The underground hot water in contact with hot spots changes into steam. As the steam is trapped
am
between the rocks, it gets compressed to high pressure. At some places, hot water and steam gush
out from the Earth’s surface after making their way through large cracks between the rocks and
form natural geysers. Geothermal energy carried by natural geysers is utilized for generating
electricity.
gr
le
Te
on
es
hi
nt
Question 14.Write down the advantages and disadvantages of using geothermal energy.
hi
Advantages:
ba
Ta
@
Disadvantages:
am
gr
le
Did you know?
Te
Many ancient peoples, including the Romans, Chinese, and Native
Americans, used hot mineral springs for bathing, cooking, and heating.
on
Water from hot springs is now used worldwide in spas, for heating
buildings, and for agricultural and industrial uses. Using geothermal
energy to produce electricity is a relatively new industry. It was initiated
by a group of Italians who built an electric generator at Lardarello in 1904
es
A reaction in which the nucleus of an atom undergoes a change to form a new atom and releases
an enormous amount of energy is called as nuclear reaction. And the energy produced in the
Ta
process is called as nuclear energy. There are two distinct ways of obtaining nuclear energy
depending on whether the nucleus is splitting into two baby nuclei or two small nuclei combine to
form one big nucleus. And based on this they are named as
@
Nuclear fission
Nuclear fusion
am
gr
le
Figure 11: Nuclear Fission and Nuclear Fusion Reactio
235 1
56Ba139+ 94
+ 3 0n1 + Energy
Te
Fission Reaction: 92U + 0n 36Kr
Fusion Reaction: 1H
2
+ 1H32He4 + 0n
1
+ Energy
on
Question 15.Write down the advantages and disadvantages of using uranium or other radioactive
material as a source of energy.
Advantages:
es
hi
nt
Te
hi
Disadvantages:
ba
Ta
@
Research on controlled fusion power has now been going on for a half
century with somewhat disappointing results. Some experts argue that
no method will ever be found for making fusion power by a method
that humans can afford. The amount of energy produced by the fusion,
they say, will always be less than the amount of energy put into the
am
process in the first place. Other scientists disagree. They believe that
success may be soon incoming.
gr
le
Te
Question 16.As we have seen in case of nuclear energy that some of the mass is getting “converted”
into energy. Does it mean that both conservation of energy and conservation of mass is false?
on
es
hi
nt
c. Environmental Consequence
Te
Exploiting any source of energy disturbs the environment in some way or the other. Following
hi
The combustion of fossil fuels is producing acid rain and damaging plants, crops, soil, land
ba
atmosphere.
The cutting down of trees from the forest (deforestation) for obtaining firewood is causing
soil erosion and destroying wild life.
@
It is the 21st century and still more than 80% of our all energy need is met by burning fossil fuels
as you can see in the pie chart next page. We have seen the disadvantages of using fossil fuel as
the source of the energy and also the advantages of using some of the renewable sources of
energy. And that is why we should try to decrease our dependency on fossil fuel and go towards
more clean and environmental friendly sources of energy. And even if we are dependent on the
fossil fuels we can make some effort to conserve that type of energy or make the production of
energy more efficient and clean.
am
gr
le
Te
on
es
Figure 12: Pie chart of % wise energy generation from various sources
hi
nt
Question 17: Based on what you have learnt what do you think are the measures we can take to
minimize the bad effect on the environment.
Te
hi
ba
Ta
@
1) What is calorific value of a fuel? How does it play a role in choosing a good fuel?
2) What is greenhouse effect? What are its harmful impacts? How to minimize its effect?
3) How do we produce electricity in a thermal power station?
4) Mention the advantages and disadvantages of using hydel power?
5) What are the differences between the two ways of using solar energy: Solar Cooker and Solar
am
Cell?
6) 48 kJ of energy is produced per minute in a nuclear reactor. Calculate the number of fissions,
which would be taking place in the reactor per second, if the energy released per fission is 3.2 x
gr
10-11 J.
7) The use of dry wood as domestic fuel is not considered as good; charcoal seems to be a better
le
fuel. State two reasons for it.
8) What is geothermal energy? What are its advantages and disadvantages?
Te
9) Energy is always conserved. Why then environmentalist put so much focus on “Conserving
energy”? Give some steps/examples of doing so.
10) Short answer question: on
A) What do you mean by solar constant of sun? What is its value?
B) What type of mirror can be used in Box Type Solar cooker?
C) Why it is difficult to use hydrogen as a source of energy?
es
D) What is the maximum temperature attained in a concave reflector type solar cooker?
E) Fossil fuels are classified as non-renewable source of energy. Explain why.
hi
11) If energy is always conserved in a chemical or physical process then why is there an energy
crisis?
nt
A) Energy is getting lost in the universe C) Energy is not conserved in real life
B) Energy is dissipated from more usable D) All of these
form to less usable form
Te
Statement 2: They are called fossil fuels as they are made from dead remains of organic matter.
A) Both the statements are correct, but statement 2 is not the reason for statement 1.
ba
B) Both the statements are correct, and statement 2 is the reason for statement 1.
C) Statement 1 is correct and statement 2 is incorrect.
D) Both the statements are incorrect.
Ta
13) If you are stuck in a forest which source of energy will you prefer and why?
A) Nuclear energy, as it is a clean source.
B) Coal ,as its efficiency is very high
@
am
oxygen.
C) The main ingredient of bio-gas is ethane and it gives a lot of smoke and also produces a lot of
residual ash.
gr
D) Bio-mass is a renewable source of energy.
le
SOLUTION
Te
6. 2.5 x 10 13
11. B
12. B on
13. C
14. B
15. C
es
hi
nt
Te
hi
ba
Ta
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
am
What is Chemistry?
gr
the structure and behaviour of atoms (elements)
the composition and properties of compounds
le
the reactions between substances along with their accompanying energy exchange
the laws that unite these phenomena into a comprehensive system
Te
a. Atom and Stability
Atoms differ from one another in the number of protons, neutrons and electrons they contain.
on
However, their arrangement always follows the same set of principles.
b. Chemical reactions
ba
How chemicals react with each other is dictated by the chemical properties of the element or
compound- the ways in which a compound or element undergoes change in composition.
c. Chemical Equation
A chemical reaction is typically represented by a chemical equation, which represents the change
from reactants to products. The left hand side of the equation represents the reactants, while the
right hand side represents the products. A typical chemical reaction is written with stoichiometric
coefficients, which shows the relative amount of products and reactants involved in the reaction.
Each element/compound is followed by a parenthetical note of the compound’s state: (l) for
liquid, (s) for solid and (g) for gas. The symbol (aq) is also commonly used in order to represent
am
an aqueous solution, in which compounds are dissolved in water. A reaction might take the
following form:
gr
In the above example, A and B, known as the reactants, react to form C and D, the products.
le
Question 1. What are the points to consider while writing an accurate chemical equation?
Te
on
es
hi
nt
Te
Question 2. Why is there a need to write down the state of a compound in a chemical reaction?
hi
ba
Ta
@
a. Combination reaction
(Refer to video - Chemical reactions and Equations I)
A combination reaction occurs when two or more compounds combine to form a complex
compound. The simplest equation of combination reaction is illustrated below.
am
gr
le
Te
Figure 1 - A Combination Reaction
Ag (s) + O2 (g)
on
es
H2 (g) + O2 (g)
hi
nt
b. Decomposition reaction
(Refer to video – Chemical Reactions and Equations II)
Te
decomposition reactions. The major constituents of our food such as carbohydrates, fats, proteins,
etc, decompose to form a number of simpler substances. These substances further react, releasing
ba
A classic example of this type of reaction is the decomposition of water(electrolysis) into oxygen
Ta
am
Question 4. Write the equation to represent the thermal decomposition of calcium carbonate.
gr
le
Te
Question 5. Give a reaction of the class of compound that undergoes electrolytic decomposition.
on
Question 6. How is photolytic decomposition used in photography, also write the reaction involved?
es
hi
nt
Te
hi
ba
Nuclear energy is the Holy Grail of energy sources in modern world. It has the
power to provide electricity for an entire city and can even annihilate the city if
used destructively. But did you know that it all begins with a set of combination
@
c. Displacement reactions
(Refer to video-Subtopic: Displacement Reactions - Chemical Reaction and Equations II)
Displacement reactions are easily seen when a salt of a lesser reactive metal is in solution with a
am
more reactive metal. During the reaction:
gr
the less reactive metal coats the surface of the more reactive metal
le
Te
Figure 3 - A Single Displacement Reaction
on
Question 7. Determine whether the following reaction is feasible. If yes, complete them.
es
hi
Double displacement reactions may be defined as the chemical reaction in which one component
each of both the reacting molecules are exchanged to form the products. During this reaction, the
cations and anions of the two different compounds switch places, forming two entirely different
Ta
compounds.
Double displacement reactions generally take place in aqueous solutions in which the ions
@
For example, on mixing a solution of barium chloride with sodium sulphate, a white precipitate of
barium sulphate is immediately formed. These reactions are ionic in nature. The reactants change
into ions when dissolved in water and there is an exchange of ions in solution. This results in the
formation of new product molecules.
am
gr
Question 8. Complete the following reaction to predict the products formed:
le
1. An aqueous solution of lead nitrate is added to sodium sulphate
2. Zinc sulphide pellets are added to an aqueous solution of hydrochloric acid
Te
on
es
hi
Fundamentally, redox reactions are a family of reactions that are concerned with the transfer of
electrons between species. Like acid-base reactions, redox reactions are a matched set - you don't
Te
have an oxidation reaction without a reduction reaction happening at the same time. Oxidation
refers to the loss of electrons, while reduction refers to the gain of electrons. Each reaction by
itself is called a "half-reaction", simply because we need two (2) half-reactions to form a whole
hi
reaction. In notating redox reactions, chemists typically write out the electrons explicitly:
ba
Cu (s) Cu2+ + 2 e-
This half-reaction says that we have solid copper (with no charge) being oxidized (losing
Ta
electrons) to form a copper ion with a plus 2 charge. Hence this is the oxidation reaction.
This reaction says that chlorine gas gains two electrons in order to generate two chloride ions.
Hence the complete redox reaction can be written as -
H2 + Cl2 2HCl
am
An example of a redox reaction is the reaction between hydrogen gas and fluorine gas:
gr
H2 (g) + F2 (g) → 2HF (g)
le
In this reaction, hydrogen is oxidized and fluorine is reduced, and is thus the oxidizing agent.
Te
on
es
Question 9.Write down the reduction and oxidation half reactions of the reaction:
nt
Question 10. Identify the type of the following reactions in the respective order:
Ta
In any chemical reaction, chemical bonds are either broken or formed. And the rule of thumb
is: When chemical bonds are formed, heat is released and when chemical bonds are broken, heat
is absorbed. Molecules inherently want to stay together, so formation of chemical bonds between
molecules requires less energy as compared to breaking bonds between molecules, which requires
more energy and results in heat being absorbed from the surroundings.
am
3. Catalysts
A catalyst is a substance that:
gr
either speeds up or slows down a chemical reaction
is not used up during the reaction (its mass is the same at the start and end of the reaction)
is chemically unchanged after the reaction has finished
le
Only a very small amount of catalyst is needed to increase the rate of the reaction between large
Te
amounts of reactants. Different catalysts are needed to catalyse different reactions.
The table summarises some catalysts and the reactions they catalyse:
on
es
hi
nt
Question 11.When quick lime is put in water it starts boiling violently. Why do you think this
happens?
@
Question 12. Why do Oily and fatty food become inedible when kept out for too long?
am
Question 13. Why does corrosion always happen layer by layer?.
gr
le
Te
on
4. Balancing a Chemical Reaction
es
(Refer to video – Balancing a Chemical Reaction)
hi
State the law in accordance with which chemical equations are balanced.
nt
Te
hi
changed.
Clarification: When subscripts of a molecule are changed, you are
Ta
Question 14. Balance first two equations using hit and trial method and rest using algebraic method:
am
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
am
6. Give an example each for oxidizing & reducing agents with the help of a suitable example.
7. Write an equation to represent a redox reaction. Write the oxidation and reduction half
separately.
gr
8. What are antioxidants?
9. What is rusting of iron?
le
10. Explain displacement reactions with the help of an example.
11. MnO2 + 4HCl MnCl2 + Cl2 + 2H2O. Identify the oxidising & reducing agent.
Te
12. Balance the following equations -
(i) HNO3 + Ca(OH)2 Ca(NO3)2 + H2O
(ii) NaCl + AgNO3 AgCl + NaNO3 on
13. Write any two measures to prevent rancidity.
14. Why is it necessary to balance a chemical equation?
15. What are the different ways to make chemical equation more informative?
es
16. What are the characteristics of chemical reaction?
17. Because of the formation of which of the following does lime water turns milky when carbon
hi
20. When copper oxide is heated with hydrogen, copper metal and water are formed. Which of the
following is the oxidizing agent in this reaction?
(a) Copper oxide (b) Hydrogen
Ta
SOLUTION
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
What are Acids?
The definition of acids and bases has taken shape through the course of almost about a hundred
am
years as a result of human obsession of identifying common properties and hence categorizing
things. By the end of this chapter, you would have reached the answer. The first of these attempts
to categorise substances into acids or bases began with the study of their physical properties.
gr
a. The Classical Theory
(Refer to video clip – Introduction I)
le
Te
Acids are sour in taste and corrosive in nature.
All acids generally have hydrogen as their constituent element in the form of proton (H+)
which dissociates in aqueous solutions.
Acid turns blue litmus red.
on
b. Electropositivity and Electronegativity
(Refer to video clip – Introduction II)
es
Electronegativity is the ability of an atom to attract electrons to itself. It's governed by nucleus
size (more protons - more pull!) but also the number of valence shells, farther away an electron is,
hi
Question 1. What is electropositivity? What do you think will happen if a highly electropositive
element bonded to another element of high electronegativity?
Te
hi
ba
Ta
In this expression, Q represents a charge, k represents a constant and r is the distance between the
charges. When r = 2, then r2= 4. When r = 3, then r2 = 9. When r = 4, then r2 = 16. It is readily
am
seen from these numbers that, as the distance between the charges increases, the force decreases
very rapidly. This is called an inverse square law.
Electronegativity order for some common elements.
F > O > Cl > N > Br > I > S > C > H > metals
gr
d. Ionic and Covalent Bonds
(Refer to videoclip – Introduction III)
le
There are many types of chemical bonds and forces that bind molecules together. The two most
Te
basic types of bonds are characterized as either ionic or covalent. In ionic bonding, one of the
atoms transfers electron(s) to the other. Ionic bonds require at least one electron donor and one
electron acceptor. In contrast, atoms with the same electronegativity share electrons in covalent
bonds, because neither atom preferentially attracts or repels the shared electrons.
on
(i) Ionic bonding
es
hi
In this example, the sodium atom is donating its 1 valence electron to the chlorine atom. This
creates a sodium cation and a chlorine anion. Notice that the net charge of the resulting compound
nt
is 0.
Question 2. Comment on the nature of bonds present in a molecule of XY when you have these
Te
additional information
Question 3. Show the bonding of atoms in the case of zinc sulphide (ZnS).
am
gr
(ii) Covalent bonding
Covalent bonding is the sharing of electrons between atoms. This type of bonding occurs between
le
two atoms of the same element or of elements close to each other in the periodic table(having
similar electronegativities). This bonding occurs primarily between non-metallic atoms.
Te
on
In this example, a single atom of carbon having a valency of four, shares its electrons mutually
with two other oxygen atoms. Note – here electrons are shared between atoms rather than the
complete transfer of electrons. Hence cations and anions are not formed. Also since no electrons
were gained or lost in the process of bonding, the net charge on the compound is 0.
es
Question 4. Show the bonding between the constituent atoms of methane (CH4).
hi
nt
Te
hi
ba
a. Arrhenius Acids
(Refer to video clip –Acids)
In 1884, the Swedish chemist Svante Arrhenius proposed two specific classifications of
@
compounds, termed acids and bases. When dissolved in an aqueous solution, certain ions were
released into the solution. Consider the case of HCl.
HCl(aq) H+(aq) + Cl−(aq)
In this reaction, hydrochloric acid (HCl) dissociates completely into hydrogen (H +) and chlorine
(Cl-) ions when dissolved in water, thereby releasing H+ ions into solution. Formation of the
hydronium ion equation:
HCl(aq) + H2O(l) H3O+(aq) + Cl−(aq)
am
Question 5. Pure water does not conduct electricity. Why does adding a few drops of an acid to the
pure water make it conducting ?
gr
le
Te
on
es
Did you know?
b. Arrhenius Bases
(Refer to video clip - What is an Acid and a Base - Bases)
ba
Let's zoom into a bar of soap to understand more about the chemical nature of bases.
Sodium hydroxide (NaOH) is an Arrhenius base that is often used to make soap. When the NaOH
Ta
goes into solution, the positively charged sodium ion breaks apart from the negatively charged
hydroxide ion.
@
Question 6. Write the chemical equation to represent the ionic dissociation of sodium hydroxide
(NaOH) in an aqueous medium.
am
NH3(aq) + HCl(aq) NH4Cl(aq)
In the sodium hydroxide case, hydrogen ions from the acid are reacting with hydroxide ions from
the sodium hydroxide - in line with the Arrhenius theory. However, in the ammonia case, there
gr
are no hydroxide ions!
le
4. The Bronsted-Lowry Theory of Acids and Bases
Te
In 1923, chemists Johannes Nicolaus Bronsted and Thomas Martin Lowry independently
developed definitions of acids and bases based on the compounds' abilities to either donate or
accept protons (H+ ions). In this theory, acids are defined as proton donors; whereas bases are
defined as proton acceptors. A compound that acts as both a Bronsted-Lowry acid and base
on
together is called amphoteric. This took the Arrhenius definition one step further, as a substance
no longer needed to be composed of hydrogen (H+) or hydroxide (OH-) ions in order to be
classified as an acid or base.
es
Question 7. Will the compound NH3 acts as an acid or a base. Justify your answer in line with the
Bronsted-Lowry Theory.
hi
nt
Te
hi
ba
Ta
In this theory an acid is a substance that can release a proton (like in the Arrhenius theory) and
@
a base is a substance that can accept a proton. A basic salt such as Na+F- generates OH- ions in
the water by taking protons from water itself (to make HF):
When a Bronsted acid dissociates, it increases the concentration of hydrogen ions in the
solution, [H+]; conversely, Bronsted bases dissociate by taking a proton from the solvent (water)
to generate [OH−].
Question 8.Identify the following compounds/ions as acids or bases : Cl-, NH4+, HSO4- .
am
gr
5. Reactions of Acids
(Refer to video clip – Acid Base Reactions)
le
Te
Question9. Fill the boxes with complete and balanced chemical equations.
6. Indicators
(Refer to video clip –What is an Acid and a Base? – Indicators)
Indicators are a class of substances which react differently in the presence of acids and bases. The
change by these compounds is usually consistent and reflects on the physical property of the
substance such as colour and smell. This consistent change in physical properties which is
distinctive for both acidic and basic medium makes these certain substances ideal for use as acid
and base indicators. Some of the common laboratory indicators are given below.
am
a. Litmus
gr
Litmus is a weak acid and is one of the oldest forms of a pH
indicator and is used to test materials for acidity.
le
It has a complicated structure which we will simplify to
HLit. The "H" is the proton which can be given away to
Te
Figure 1 - Chemical structure of 7- something else. The "Lit" is the rest of the weak acid
hydroxyphenoxazone, the chromophore of
molecule. There will be an equilibrium established when this
litmus components.
acid dissolves in water.
Litmus solution
hi
nt
b. Methyl orange
am
alkaline solution.
gr
le
Te
7. Water
(Refer to Subtopic – Water) on
Water, even pure water, has an amphiprotic nature. This means that a small amount of ions will
form in pure water. Some molecules of H2O will act as acids, each donating a proton to a
corresponding H2O molecule that acts as a base. Thus, the proton-donating molecule becomes a
es
hydroxide ion, OH-, while the proton-accepting molecule becomes a hydronium ion, H3O+.
Water molecules are amphiprotic and can function as both acids and bases. One water molecule
hi
(acting as a base) can accept a hydrogen ion from a second one (acting as an acid). This will be
happening anywhere there is even a trace of water - it does not have to be pure.
nt
Te
hi
ba
Ta
8. pH
The pH of an aqueous solution is the measure of how acidic or basic it is. The pH of an aqueous
solution can be determined and calculated by using the concentration of ions in the solution.
a. Introduction
(Refer to video clip – What is an Acid and a Base? – pH)
The pH of an aqueous solution is based on
am
the pH scale which typically ranges from 0
to 14 in water. A pH of 7 is considered to be
neutral. A pH of less than 7 is considered
gr
acidic. A pH of greater than 7 is then
considered basic. Acidic solutions have high
hydronium concentrations and lower
le
hydroxide concentrations. Basic solutions
have high hydroxide concentrations and
Te
lower hydronium concentrations.
am
[HA] is the weak acid concentration
Stronger the acid, higher will be its Ka value. Weak bases also only partially dissociate in
gr
aqueous solutions and reach a condition of equilibrium.
le
bases are non corrosive and harmless.
Clarification : Both strong acids and strong bases are dangerous and
Te
corrosive. Bases like NaOH, KOH are very strong and can dissolve flesh.
Home Activity on
Red Cabbage Juice – A natural and home made indicator
es
We live in a world which is full of dangerous and corrosive acids and alkalis. How do we identify
them? As we have seen, acids and bases have the property of modifying the colour of certain
substances. This is the case with the juice of the red cabbage. This liquid has a blue-violet colour,
hi
but when it comes in contact with acidic substances it becomes red, while in contact with basic
substances it becomes green and even yellow. Let's see how it is possible to use the juice of the
nt
Red cabbage is a member of the cabbage family which has a red-violet colour. Buy one of them
and cut it in little slices. Put them in a pot and pour enough water to cover them. Boil for half an
hour, then turn off the heat and let the temperature come down. Pour the blue-violet liquid you
@
have obtained into a large, low container. The boiled cabbage slices are edible and you can use
them in a recipe.
Pour some drops of this liquid on a white surface and observe it change colour when it is
mixed with vinegar or with baking soda. You will see that this liquid becomes red in contact
with vinegar or lemon juice, while it becomes green in contact with baking soda.
Pour one centimetre of the red cabbage juice indicator liquid into a transparent glass. Add
water up to half of the glass. Now, pour vinegar into the glass and observe the colour changes
of the liquid. Repeat the experiment by adding, this time, a little baking soda instead of the
vinegar. Also in this case, you will see colour changes.
Cut some porous white paper or card sheets into rectangles and soak them in the juice so they
am
absorb it. After about half an hour, remove the cards and put them away to dry. To do it
quicker, you can also dry them with a hairdryer. Cut the cards in strips. Put away the red
cabbage cards which are not used immediately: they will last some months. If you store them
gr
in a closed envelope to reduce their oxidization, they will last longer.
Add the indicator strips to the given substances and note the colour produced –
le
Substance Lemon Cola Vinegar Tap Dishwashing Baking Toothpaste Onion
Te
juice water soap soda solution juice
Colour of
solution
a. Acids
hi
Non metal oxide with water ( complete the reactions to show the products formed )
nt
SO2 + H2O
Te
hi
CO2 + H2O
ba
b. Base
Ta
Metal oxide with water ( complete the reactions to show the products formed )
@
CaO + H2O
As its name suggests, citric acid is found in citrus fruits—particularly lemons, limes, and
grapefruits. It is also used as a flavouring agent, preservative, and cleaning agent. As a
preservative, citric acid prevents metal ions from reacting with, and thus hastening the
degradation of fats in foods. It is also used in the production of hair rinses and low-pH shampoos
and toothpastes.
Question13. Name the acids found in the following natural chemical substances:
Ant stings -
am
Vinegar -
Curd -
gr
There are plenty of acids found in the human body, including hydrochloric acid or stomach
acid—which, in large quantities, causes indigestion, and the need for neutralization with a base.
Nature also produces acids that are toxic to humans, such as sulphuric acid.
le
Bases, for instance magnesium sulphate, better known as Epsom salts, which provide a powerful
Te
laxative also used for ridding the body of poisons.
Bases are also commonly used in toothpastes. Tooth decay starts when the pH of the mouth drops
on
lower than 5.5. To counter the acidic effect, a basic substance is added to toothpastes in order to
neutralize the harmful effect.
es
minutes.
Te
hi
11. Salts
ba
Salts are ionic compounds formed as a result of ionic attraction between a cation and an anion.
Ta
Since the force of attraction is very high, salts are always found in a solid crystalline state.
a. Neutralization
@
A salt is any compound which can be derived from the neutralization of an acid and a base. The
word "neutralization" is used because the acid and base properties of H+ and OH- are destroyed or
neutralized. In the reaction, H+ and OH- combine to form HOH or H2O or water molecules. A
neutralization is a type of double replacement reaction. A salt is the product of an acid-base
reaction and is a much broader term then common table salt.
HCl(aq) + NaOH(aq) ⇋
am
c. Weak Acid - Weak Base Neutralization
gr
A weak acid, weak base reaction can be shown by the net ionic equation example:
le
The equivalence point of a neutralization reaction is when both the acid and the base in the
Te
reaction have been completely consumed and neither of them are in excess. When a strong acid
neutralizes a weak base, the resulting solution's pH will be less than 7. When a strong base
neutralizes a weak acid, the resulting solution's pH will be greater than 7.
on
d. Baking Soda
am
e. Soda – Acid Fire Extinguishers
gr
A soda acid extinguisher acts by cutting off the supply of air on all types of fire, except fire
created because of electrical and inflammable liquids. How does this happen? This is done by
le
carbon dioxide that is produced when the acid reacts with baking soda in the extinguisher. Here's
the reaction that takes place :
Te
2NaHCO3(s) + H2SO4(aq) Na2SO4(ppt) + 2H2O(l) + 2CO2(g)
on
As you can see, carbon dioxide is produced in the above reaction. Also, you must be knowing that
CO2 gas does not support combustion and hence the fire is extinguished.
Question 16. Heating of water increases the energy of the molecules of water. This leads to an
es
increase in the dissociation of the molecules. Does this mean the pH of water has changed? Does
it mean that water becomes acidic or basic upon heating. Explain your answer briefly.
hi
nt
Te
hi
ba
Question 17. What is water of crystallization ? What are it’s effects on the crystal of a particular salt ?
Ta
@
Question 18. What have you understood about acids and bases throughout the chapter?
am
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
1. How would you define acids & bases in accordance with Arrhenius theory?
2. Give an example of a practical application of neutralization?
3. Use the concept of redox reactions to explain corrosion in the case of iron?
4. How do you classify acid as strong & weak acids?
5. Metallic oxides are basic in nature. Give reason
am
6. Does pH play an important role in normal functioning of human body? Justify your answer.
7. Why is sulphuric acid considered as dehydrating agent? Give an example.
8. Why is gypsum used in manufacture of cement?
gr
9. How do you convert plaster of Paris to gypsum?
10. What is borax?Write the chemical formula.
le
11. A metal carbonate X on reacting with an acid gives a gas which when passed through a solution of
Y gives a carbonate back. On the other hand, a gas G that is obtained at anode during electrolysis
Te
of brine is passed on dry Y, it gives a compound Z, used for disinfecting drinking water. Identify
X,Y,G and Z.
12. Which of these qualifies as a weak acid? on
(a) Nitric acid (b) Acetic acid
(d) Sulphuric acid (d) Hydrochloric acid
13. The solution from the following options whose pH is above 7 is -
es
(a) vinegar (b) milk
(c) ammonia (d) dil.acetic acid
hi
SOLUTION
12. (b) Acetic acid
@
©BYJU’S
@
Ta
ba
hi
Te
nt
hi
es
on
Te
le
gr
am
97
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer to Subtopic - Introduction)
Remove all the metallic objects from the world. Whatever is left behind will have striking
am
similarities to the Stone Age.
Stone Age: Part of the early human timeline. Tools and weapons made up of rocks.
Some rocks contain rich deposits of minerals which lead to the study of properties of metals.
gr
Eventually leading to use as weapons. Further study over the course of hundreds of years has
changed the surface of the Earth and drastically affected our lives.
le
a. Physical Properties of Metals
Te
(Refer to Subtopic - Physical Properties)
____________. Gold and Silver metals are the most malleable metals. They can be hammered
into very fine sheets. A single gram can be beaten into a sheet of 1 square meter.
nt
Wires are made from copper, aluminium, iron and magnesium. This property of metals which
allows them to be turned into thin wires is called ___________. Most metals are ductile.
Te
Metals are predominantly sonorous. That is, they make a ringing sound when struck.
Therefore,they are used for making bells. Metal wires are used in musical instruments.
ba
All metals except mercury exist in the solid form at room temperature. Therefore, they retain
their shapes under normal room temperature conditions.
Ta
The physical properties of metals are macroscopic observations. To truly understand these
properties along with the chemical properties of metals, one needs to explore the metallic
world at the atomic level.
Question 1. State some of the exceptions that the following elements display with respect to the
properties of metals and non-metals.
Gallium -
Mercury -
am
Iodine -
gr
le
Te
Did you know?
Of all the metals known to us, Tungsten has the highest melting
on
point of 3422°C whereas Mercury has the lowest melting point of -
38.83°C.Now you know why tungsten filaments are used in electric
bulbs.
es
hi
nt
Metals fall into groups in the periodic table determined by similar arrangements of their
valence electrons and a consequent similarity in chemical properties. Groups of similar metals
hi
include the alkali metals (Group 1 in the periodic table), the alkaline-earth metals (Group 2 in the
periodictable), and the rare-earth metals (the lanthanide and actinide series of Group 3). Most
ba
metals other than the alkali metals and the alkaline earth metals are called transition metals. The
oxidation states, or valence, of the metal ions vary from +1 for the alkali metals to as much as +7
for some transition metals.
Ta
The systematic distribution of electrons within an atom determines the chemical behaviour of the
substance whereas the bonding between the atoms of the metals themselves determines the
physical properties.
@
Question 2. What do you understand by valency? What are the valencies of Boron and Xenon?
am
gr
Question 3. What is the difference between valency and oxidation state?
le
Te
on
es
hi
isolated atom in its gaseous state in order to remove its outermost electron. Units of measurement
- kJ/mol.
Te
hi
ba
Ta
@
Question 4. Why does Sodium(Na) have a higher ionization energy compared to Potassium(K)?
am
gr
le
c. Metallic Bonding
Te
In metallic bonds,
the valence electrons of the
interacting metal atoms delocalize.
on That is to say, instead of orbiting
their respective metal atoms, they
form a "sea" of electrons that
surrounds the positively charged
es
keeping the same orientation to one another. By replacing each group of atoms by a
representative point a crystal lattice is obtained.
ba
The electrons then move freely throughout the space between the atomic nuclei. This
constant sea of mobile and delocalized electron creates the effect of an electrostatic
Ta
Question 5.Use your knowledge of metallic bonding to explain the physical properties of metals such
as electrical conductivity, thermal conductivity and malleability.
am
gr
le
Te
on
2. Chemical Properties of Metals
(Refer to Subtopic - Chemical Properties)
es
Chemically, the metals differ from the non-metals in a way that they form positive ions and basic
oxides and hydroxides. Upon exposure to moist air, a great many undergo corrosion, i.e., enter
hi
into a chemical reaction; e.g., iron rusts when exposed to moist air, the oxygen of the atmosphere
uniting with the metal to form the oxide of the metal.
nt
For example, when copper is heated in air, it combines with oxygen to form copper(II) oxide, a
black oxide.
ba
2Cu + O2 → 2CuO
(Copper) (Copper (II) oxide)
Amphoteric oxides: Oxides which react with both acids and bases to give salt and water.
Ta
Al2O3 + 2NaOH →
Metal like Na, K catch fire when treated with cold water. This is due to the large amount of heat
produced during the reaction. The hydrogen gas evolved during the process catches fire due to
heat. Metals like Mg, Fe, Zn, Ca react only with steam to give corresponding oxide and H2 gas.
Write the balanced chemical equation for the reaction between calcium and water –
am
c. The Reactivity Series
gr
On the basis of their ability to be oxidized, i.e., lose electrons, metals can be arranged in a list
called the reactivity series. Metals toward the beginning of the series, like potassium or sodium,
le
are more readily oxidized than those toward the end, like silver and gold.
Te
on
es
hi
nt
NOTE:
hi
(i) Na & K are highly reactive metals. They react with air so vigorously that they catch fire
when kept in open. So they are often stored in kerosene.
ba
(ii) Metals like Al, Zn, Pb, Sn do not react with air at room temp due to formation of thin oxide
layer on their surface.
(iii) Silver and gold do not react with oxygen even at high temp.
Ta
Question6. Complete the following equations to show the reaction between metals and strong acids -
am
i. Mg(s) + HCl(aq)
gr
ii. K(s) + H2SO4(aq)
le
iii. Ag(s) + H3PO4(aq)
Te
e. Reaction Between Metals and Non-Metals on
Fill in the blanks wherever required -
Reactivity of elements can be understood as a tendency to attain a completely filled valence
shell.
es
Atom(s) can lose electrons from valence shells to form __________(+ve ions).
Atom(s) gain electrons in valence shell to form __________(–ve ions).
hi
Oppositely charged ions attract each other and are held by strong electrostatic forces of
attraction forming ionic compounds.
nt
Te
3. Ionic Compounds
(Refer to Subtopic - The Why Questions)
hi
Question 5. You have two unknown samples of compound - A & B. One of them is ionic compound
and one of them is covalent compound.
am
Correct option -
gr
Activity
le
Magic flames
Te
Have you ever seen a blue flame? What about green or purple one? When you're expecting a regular
flame, these colourful changes can be an incredible surprise! What you may not know is these
spectacular colours result from the presence of specific elements. We're going to show you a couple
on
of materials that you can easily find in your chemistry laboratory which contain metals that are easily
identifiable during a Flame Test!
es
Materials
Popsicle sticks
hi
Boric acid
Potassium sulphate
nt
Copper(II) chloride
Flame source
Te
Cup of water
Experiment
hi
3. Dim the lights and place the boric acid-covered popsicle stick into a flame. What color does
the flame produce? Write your observation in the table below.
4. Dip another popsicle stick in water.
Ta
Observation
am
and copper(II) chloride gives the flame a blue-green colour due to the presence of copper atoms.
These element-specific colours are a result of their emission spectrum. The emission spectrum of an
element is the colour emitted when an atom's electrons make a transition from a high energy state to a
gr
low energy state.
Can you now explain the sorcery going on behind those fancy colourful fireworks which you do not
le
burn because the environment is of a bigger concern to you?
Te
Test Material Boric acid Potassium sulphate Copper(II) chloride
Colour of Flame
on
es
hi
nt
Te
hi
ba
Ta
@
4. Metallurgy
(Refer to Subtopic - Extraction of Metals and Non-Metals)
We have understood in the covered subtopics, the chemical properties of metals. This knowledge
is used to isolate metals from their compounds that are commonly found in the crust of the Earth.
Metallurgy is the science of economically and profitably obtaining metals from ores.
What does one mean by the term “Ore”?
am
gr
Minerals: Minerals are naturally-occurring inorganic substances with a definite and predictable
le
chemical composition and physical properties.
Te
Define the following : Gangue, Flux and Slag:
on
es
hi
nt
Te
hi
ba
a. Introduction
(Refer to video clip - Extraction of Metals and Non-Metals - Introduction)
@
The metal reactivity series conveniently groups all metals into three neat groups -
i) Metals of low reactivity
ii) Metals of medium reactivity
iii) Metals of high reactivity
Depending upon the metal which is to be isolated from its ore, a defined set of steps is taken,
These steps have been used after a thorough study of chemical properties of the metal.
Question 6. What are the basic steps involved in the process of obtaining metal from its ore.
am
gr
le
Enrichment of ore:
Te
It is done to remove earthy impurities like clay, sand etc. from an ore is called enrichment or
concentration of the ore.
Ores which are mined often contain many impurities. These impurities are called gangue.
on
Gravity separation, hydraulic washing, electromagnetic separation, froth flotation process,
etc. are some examples of the processes which are applied for concentration of ores.
es
b. Extracting Metals of Low Reactivity
The metals low in the reactive series are very less reactive. The oxides of such metals can be
hi
2HgO(s) heat
hi
In this case mercury is a metal of low reactivity, hence it is weakly bounded to the sulphur atom.
Simple heating of the ore is sufficient to provide the energy required to break the bond.
ba
Metals like iron, zinc, lead etc. occur as sulphides or carbonates in nature. First the ore is
converted into its oxide form. This is done by either roasting or by calcination.
@
Roasting: Heating of sulphide ores in the presence of excess air to convert them into oxides is
known as roasting.
2ZnS(s) + 3O2(g) heat 2ZnO(s) + SO2(g)
Calcination: Heating of carbonate ores in the limited supply of air to convert them into oxides is
known as calcination.
ZnCO3(s) heat ZnO(s) + CO2(g)
Question 7. What are the steps you will take in order to convert an ore of copper carbonate(CuCO 3)
into its oxide?
am
gr
le
Question 8. How will isolate copper from the copper oxide obtained above? Mention all possible
Te
processes.
on
es
hi
nt
(Refer to video clip - Extraction of Metals and Non-Metals - Metals of High Reactivity)
The metals high up in the activity series are very reactive. They cannot be obtained by reduction
hi
of their oxides by carbon due to the strong ionic bonds. These metals are obtained by the
electrolysis of their molten chlorides.
ba
Question 9. Draw and describe the setup to be used in order to extract sodium out of sodium
chloride(NaCl).
Ta
@
e. Refining of Metals
(Refer to video clip - Extraction of Metals and Non-Metals - Refining of Metals)
Impurities present in the obtained metal can be removed by electrolytic refining. Copper and
Aluminium are the common metals obtained using this method.
Consider the following example to understand the refining of copper.
am
Anode – slab of impure copper
gr
Solution – aqueous solution of copper
sulphate with some dilute sulphuric acid.
le
On application of electric current, copper
Te
ions from the anode are released in the
solution and equivalent amount of copper
from solution is deposited at cathode.
Impurities containing traces of silver and
gold get deposited at the bottom of anode
on
Figure 5 - Electrolytic Refining
as anode mud.
es
hi
5. Corrosion
(Refer to Subtopic - Corrosion)
nt
Metals are attacked by substances in surroundings like moisture and acids.Corrosion is a process
Te
through which metals in manufactured states return to their natural oxidation states. This process
is a reduction-oxidation reaction in which the metal is being oxidized by its surroundings, often
the oxygen in air. This reaction is both spontaneous(does not need the supply of external energy
hi
a. Corrosion
(Refer to video clip - Corrosion)
Fill in the blanks for the following statements with respect to corrosion-
Ta
Silver - it reacts with sulphur in air to form silver sulphide and articles develop a black
coating of this _________________.
@
Copper - reacts with moist carbon dioxide in air and gains a green coat of ____________.
Iron-acquires a coating of a brown flaky substance called rust(ferric oxide). Both air and
moisture are necessary for rusting of iron.
Question 10. Write the chemical reaction to show the rusting of iron.
am
b. Prevention of Corrosion
gr
(Refer to video clip - Prevention of Corrosion)
le
Corrosion of iron is prevented by painting, oiling, greasing, galvanizing, electroplating,
anodising and making alloys. In short, cutting off the supply of oxygen to the metal surface.
Te
In galvanization, iron or steel is coated with a layer of zinc because zinc is preferably
oxidized to iron.
on
Question 11. Why is there a need to protect metals from corrosion?
es
hi
nt
Te
Stainless steel is obtained by mixing iron with nickel and chromium. It is hard and doesn’t
rust.
Mercury is added to other metals to make alloys which are commonly known as _________.
am
Brass: alloy of ______ and ______.
Bronze: alloy of copper and tin. In brass and bronze, melting point and electrical conductivity
is lower than that of pure metal.
gr
Solder: alloy of ________ and _______ has low melting point and is used for welding
electrical wires.
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
1. Name a non metal which conducts electricity. Can you also explain how does it do so?
2. Why are alkali metals highly reactive in air?
3. Describe the importance of the knowledge of metallurgy for the human race and its evolution.
4. If you put one end of a rod of metal in the hot solution you can feel the heat at other end. What
does it mean? What is this property of metals called?
am
5. What property of metal makes useful as electrical wires? Explain this property in terms of the
atoms involved.
6. Why is tincture of iodine applied on wounds?
gr
7. Why should food stuff with acid component not be stored in metallic containers?
8. Give reason for the following:
le
(i) Iron is used in constructing bridges & houses.
(ii) Iron sheets are galvanized before use.
Te
9. Why is aluminium used in manufacture of airplanes and high performance cars?
10. Name a metal that is attacked by cold water, boiling water and steam.
11. What are coinage metals? What factor adds value to metals like gold and silver which make them
on
expensive?
12. Why do aluminium articles lose their shine soon after use.
13. Metals are hard to cut but one among the following metals can even be cut with a knife: Identify.
es
(a)Magnesium (b) Tungsten
(c) Potassium (d) Copper
hi
16. Why do Gallium & Caesium melt when kept on the palm of your hand?
17. Which of the following metals is present in the anode mud during the electrolytic refining of
copper?
Te
18. During smelting, an additional substance is added which combines with impurities to form a
fusible product known as
ba
Answer Keys
13. (c) Potassium
17. (c) Gold
18. (d) flux
19. (a) CuCO3
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
am
gr
le
Te
Living organisms exhibit certain characters which make them unique and
differentiate them from non-living things. It is a unique and complex organization of
molecules expressing it through chemical reactions, which lead to growth, development,
on
responsiveness, adaptation and reproduction. Cells are the basic structural and functional units
of life. Cells comprise of many organelles such as nucleus, endoplasmic reticulum, etc. to
carry out different life functions.
es
hi
Question 2. Are all the cellular components alive? Give reason in support of your answer.
nt
Te
hi
ba
The basic functions performed by a living organism to maintain their life on this earth are
called life processes. The basic processes common to all living being are : nutrition,
Ta
2. Introduction to Nutrition
The process of obtaining food and utilizing it is called nutrition. A nutrient can be defined as a
substance which an organism obtains from its surroundings and uses it as a source of energy or
for the biosynthesis of its body constituents. There are mainly two modes of nutrition –
autotrophic and heterotrophic.
Photosynthesis
During photosynthesis light energy is converted into chemical energy and is stored in the form of
am
sugar. Light energy is trapped by chlorophyll and with the help of carbon dioxide, carbohydrate is
prepared. This process occurs in plants and some algae. Plants need only light energy, CO2 and
H2O to make sugar. The process of photosynthesis takes place in the chloroplasts. The total
gr
energy fixed is around 1 % of the total energy available. The gaseous exchange in plants takes
place through tiny pores, present on the surface of leaves, called stomata.
le
Te
on
Figure 6: A. Stomata closed B. Stomata closed
es
Equation-
Sunlight
hi
hydrogen sulphide. Heat energy is used to drive this process. The byproduct is
pure sulfur and is probably the source of most of this mineral. It is thought
that the first forms of life on earth used geothermal energy to make
carbohydrates using hydrogen sulfide and carbon dioxide. This process still
continues deep underground and at the bottom of the ocean around
hydrothermal vents.
am
gr
le
Figure 2: Experimental set-up (a) with KOH (b) without KOH
Te
on
es
hi
nt
Question 5. How will you prove that chlorophyll is required for photosynthesis to take place?
Te
hi
ba
Ta
@
b. Heterotrophic Nutrition
It is a mode of nutrition in which organisms obtain ready made organic food from external
source. The organisms that depend on external sources for obtaining organic nutrients are called
heterotrophs, (hetero or heteros meaning other and trophe meaning nourishment). It is a
characteristic feature of all animals and non green plants that are unable to utilize carbon and
synthesise organic compounds necessary for life; but depend upon organic sources of carbon.
am
material and shelter from the other. These organisms which derive food material are called
parasites and the organism from which food is derived is called a host. This type of nutrition
is termed as parasitic nutrition. It is also known as parasite-host relationship e.g. Cuscuta,
gr
Ascaris etc.
(iii) Holozoic Nutrition
le
It is a mode of heterotrophic nutrition which involves intake of solid pieces of food. Since solid
food is taken in, holozoic nutrition is also called ingestive nutrition. Holozoic nutrition (Holo-
Te
Whole, Zoon-Animal) is found in animals and protozoan protists. The food may be composed
of another animal, plant or its parts. Depending upon the source of food, holozoic organisms
are of three types- Herbivores, Carnivores, Ominivores.
on
Question 6. Differentiate between autotrophic and heterotrophic nutrition.
es
hi
nt
Te
3. Nutrition in Animals
a. Nutrition in Amoeba
Amoeba is a unicellular animal, so it doesn’t have a mouth for ingestion of food. Amoeba ingests
the food by encircling it with the help of pseudopodia. When the food is completely encircled, the
food is engulfed in the form of a bag called food vacuole. Several digestive enzymes react on the
food present in the food vacuoles and break it down into simple and soluble molecules. The food
digested by digestive enzymes is then absorbed in the cytoplasm by the process of diffusion. The
food absorbed by the cytoplasm is used to obtain energy, growth and repair. Undigested food in
the food vacuole is thrown out of the body by exocytosis.
am
gr
le
Te
on
es
Human beings have holozoic mode of nutrition. They take solid food in and this food is gradually
digested as it moves down the alimentary canal. The alimentary canal is basically a long tube
extending from the mouth to the anus. Various parts of alimentary canal are specialized to
hi
The mouth is the first site of digestion. The role of the teeth, tongue and saliva is to break down
food into smaller particles which are more manageable to digest. Digestion begins at the mouth
itself. Smell and taste are senses intimately related to digestion. Taste and smell help us
distinguish food that is good to eat from poisonous and spoilt food. Moreover, these senses help
in signaling the brain about the arrival of food so that it can prepare the rest of the digestive
am
system to receive food.
Question 9. Name the three types of papillae. Which two of these bear taste buds? What is the role of
the third type?
gr
le
Te
on
es
The intake of food is followed by breaking the food into small pieces by the process of chewing.
The chewing machinery of the human body includes the teeth, supporting muscles and saliva.
Ta
Humans have two sets of teeth- Milk teeth or deciduous teeth and permanent teeth. Humans along
with most of the mammals have different types of teeth.
@
am
Question 12. Label the parts of a teeth given below.
gr
le
Te
on
es
hi
Question 13. “Digestion of food begins in the mouth” – Explain this statement by providing which
nt
The next thing that food encounters in the mouth is saliva. Saliva is a viscous mixture of water
and electrolytes. It is slightly acidic with a pH of 6.8 and contains salivary amylase and lysozyme
(antibacterial) enzymes. Saliva along with the action of teeth aids in the formation of circular
@
masses of food particles called bolus which can then easily enter the oesophagus or food pipe.
Food then moves down the oesophagus by involuntary alternate contraction and relaxation of
muscles called the peristalsis movement.
am
gr
le
Te
Figure 4: Peristalsis in Oesophagus
that line its inner walls. These release gastric juices containing enzymes and hydrochloric acid as
well as mucus from structures called pits. The stomach is lined with smooth muscle aligned in
nt
three levels to produce strong contractions that can mix the food with gastric juices. The enzymes
are secreted in an inactive state in the stomach.
Te
HCl
Pepsinogen------------------> Pepsin
hi
(Inactive) (Active)
Pepsin
ba
a 19-year-old fur trapper named Alexis St. Martin got accidentally shot.
Army surgeon William Beaumont successfully patched up St. Martin, but he
was left with a hole in his stomach's abdominal wall, which is called a fistula.
The fistula allowed Beaumont to investigate the workings of
the stomach in entirely new ways.
Question 14. Why do you think is it necessary for the stomach to close its openings at both ends
during digestion? Can you name the muscles responsible for this?
am
gr
Question 15. Why are protein digesting enzymes in the stomach released as inactive enzymes or
le
zymogens?
Te
on
es
Question 16. Which enzyme is responsible for digestion of proteins? What kind of pH do you think
this enzyme needs? How does the stomach maintain this pH? What is another advantage of having
hi
such a pH?
nt
Te
hi
ba
Ta
Question 17. Why do you think the acid in stomach does not digest the stomach itself?
@
Question 18. The stomach is wired to the brain via the parasympathetic nervous system. Why do you
believe is it essential for the brain to communicate with the stomach even though digestion is
mostly an involuntary process?
am
gr
le
(Refer video: Digestion and Excretion_Mouth, Oesophagus and Stomach)
Te
(iii) The Small Intestine
on
The small intestine is almost 10 feet long but only 1 inch thick. Its main function is to digest and
absorb nutrients. The structure of the intestine optimizes this function. The digestion in the small
intestine is aided by secretions of the pancreas and liver. The liver secretions are stored in the gall
bladder before being released into the small intestine. The small intestine’s internal surface is
es
covered by bumps known as villi. Each villus is in turn covered by bumps of epithelial cells
known as microvilli. Each villus has capillaries and lymphatic vessels to absorb nutrients into the
hi
blood stream. The liver plays a role in packaging and segregating absorbed nutrients. It also
repurposes enzymes and gastric juices absorbed in the intestine.
nt
Te
Question 19. Enzymes are catalysts. True or False? Justify your answer.
@
Question 20. Proteins generally have definite shapes and sizes at particular conditions of pH and
temperature. Enzymes are also proteins. What do you think is the role their shape plays during
hydrolysis of fats, proteins and carbohydrates?
am
gr
le
Te
Question 21. Bile and pancreatic juices change the pH of the chyme in the duodenum. What change
occurs in the pH? Can you explain the requirement of changing the pH from the perspective of
enzyme requirements as we saw in the previous question?
on
es
hi
nt
Te
Question 22. What are the two important roles that a villus performs for digestion? How do microvilli
hi
The large intestine performs the final absorption of nutrients and water. Water is reabsorbed from
the chyme to make it more semisolid and easy to defecate. The chyme in the large intestine is
called the feces. The large intestine is home to a large number of bacteria that produce the
characteristic odour and colour of feces. The large intestine also stores the feces so that it can be
defecated at a single time.
am
swallowed air and the gases produced by the fermentation of bacteria in the
gastrointestinal tract. The digestive system cannot tract, and make their way into the
large intestine. Hordes of intestinal bacteria get to work, releasing a variety of gases
gr
in the process, including carbon dioxide, hydrogen, methane and hydrogen sulfide
(which gives flatulence its rotten-egg stench).
le
Te
Question 23. Does the colon have any digestive role? What other role(s) does it play?
on
es
hi
nt
Question 24. Do you think the microorganisms in the colon have a role other than producing odour in
Te
the feces?
hi
ba
Ta
@
Question 26. Defecation is a combination of voluntary and involuntary processes. Which sphincters
are responsible for this?
am
gr
(Refer video: Digestion and Excretion_ Small Intestine and Large Intestine)
le
Te
4. Respiration in Animals
Question 27. The world record for holding breath under water is 22 minutes and 22 seconds. How
on
long you can hold your breath? Why can’t you hold your breath for a long time?
es
hi
nt
Te
hi
Respiration is necessary because it provides oxygen for the various cellular reactions. Glucose is
broken down using oxygen to release energy that can be used for cellular processes. Higher
ba
carbon dioxide levels trigger the urge to breathe. The process of acquiring oxygen and expelling
carbon dioxide is known as respiration. The process of external respiration is also known as
breathing. Both respiratory and circulatory systems are essential for respiration.The circulatory
Ta
system is responsible for transporting oxygen and carbon dioxide to and from cells.
@
Question 28. List out the differences between respiration and combustion.
Exchange of gases takes place by the movement of gaseous molecules from a region of its
higher concentration to a region of its lower concentration by the process of diffusion.
Nature exhibits great diversity with respect to the way in which exchange of gases take place in
different organisms.
am
(a) Bacterium (i) Skin
(b) Earthworm (ii) Spiracles
(c) Insect (iii) Cell membrane
(d) Amphibians (iv) Gills
gr
(e) Fishes (v) Lungs and skin
le
(Refer video: Respiration_Basics of Respiration)
Te
a. Components of Respiratory System
am
Question 31. What is the significance of presence of mucus and hair in nasal cavity?
gr
le
Te
on
(ii) Pharynx
es
The pharynx is the next component of the respiratory tract, even though most people refer to it
simply as the throat. It resembles a funnel made out of muscles that acts as an intermediary
hi
(iii) Larynx
The larynx is the next component, but represents only a small section of the respiratory tract that
Te
connects the pharynx to the trachea. It is commonly referred to as the voice box, and it is located
near the anterior section of the neck.
hi
(iv) Trachea
The trachea is a longer section of the respiratory tract, shaped like a tube and approximately 5
ba
inches in length. It has several C-shaped cartilage rings which are lined with tracheal epithelium.
Ta
Question 32. What is the importance of rings of cartilage in trachea? Why it is C- shaped?
@
(v) Bronchi
The lower end of the trachea splits the respiratory tract into two branches that are named the
primary bronchi. These first run into each of the lungs before further branching off into smaller
bronchi. These secondary bronchi continue carrying the air to the lobes of the lungs, then further
split into tertiary bronchi. The tertiary bronchi then split into even smaller sections called
bronchioles that spread throughout the lungs.
(vi) Lungs
am
The lungs are the primary organs of respiration in humans and in most other air breathing
vertebrates.
gr
Question 33. List the importance of presence of lungs in our body.
le
Te
on
es
hi
nt
b. Stages of Respiration
The process of respiration can be divided into three stages- External respiration, Internal
Te
respiration and Cellular respiration. External respiration involves breathing and gaseous
exchange in lungs. Internal Respiration involves the transport of oxygen from the lungs to
different cells and the transportion of carbon dioxide from the cells to the lungs.
hi
Breathing is the first step of respiration which includes inflow (inspiration) and outflow
(expiration) of air between atmosphere and the lungs.
Ta
Question 34. Fill up the blanks to complete the path that air travels in human respiratory system.
@
_________________
am
gr
le
(Refer video: Respiration_Why do We Need Lungs?)
Alveoli
Te
The main site for gaseous exchange in lungs is the alveoli. Alveoli are made up of single
celled epithelium and are covered with blood capillaries which are also made up of single
on
celled epithelium
The process of breathing involves the combined action of ribs, lungs, intercostal muscles
and diaphragm. It involves two stages-inhalation and exhalation. It utilizes the principle
Ta
am
gr
le
Figure 6: Movement of intercostal muscles and diaphragm during inhalation and exhalation
Te
Question 36. Write the events that takes place during inhalation and exhalation.
on
es
hi
nt
Te
Diffusion of gases from lungs into the blood stream is the process of internal respiration.
A higher concentration of oxygen in lungs enables hemoglobin in RBCs to bind to the oxygen to
be transported. At the cell sites, higher concentration of oxygen in blood causes it to diffuse into
Ta
cells. Similarly, a high concentration of carbon dioxide in cells causes it to diffuse into the blood.
Most of the carbon dioxide is transported as bicarbonates in blood plasma. A small portion
@
am
gr
le
Figure 7: Gaseous exchange inside the body
Te
(Refer video: Respiration_Process of Internal Respiration)
The above equation represents cellular respiration and its main goal is to release energy in the
nt
form of ATP.
Te
ATP is a high energy molecule with three phosphate groups. Three phosphates together are
highly unstable. Breaking of these bonds provides us with the desired energy. In this process ATP
is converted to ADP. Cellular respiration includes three steps- Glycolysis, Krebs cycle and
hi
Glycolysis comprises a series of chemical reactions, each involving a different enzyme. The main
objective of glycolysis is to convert glucose which is a six carbon compound to a three carbon
compound called pyruvate.
Ta
Glycolysis
C6H12O6 --------------------------------> 2 ____________ + 2_________ + 2 ____________
NADH is another energy rich molecule. In later stages ATP is harvested from it.
Question 37. Name the two types of respirations existing in living forms with respect to the
requirement of oxygen.
am
gr
le
(Refer video: Respiration_Kinds of Respiration)
Te
If oxygen is abundantly available in the cell, pyruvate will go through multiple steps of enzyme
activity during the Krebs cycle. During Krebs cycle 2ATP, 8NADH and 2 FADH2 are released.
Like NADH, FADH2 is also an energy rich molecule. on
Question 38. What are the three different ways by which glucose is broken down in living world?
es
hi
nt
Te
Electron transport chain - Oxygen’s high affinity for electrons is exploited in this stage for
ba
energy generation. NADH and FADH2 donate their high energy electrons which are in turn
accepted by oxygen. This creates an electron imbalance between the mitochondrial membranes
leading to the generation of ATP by the action of the enzyme, ATP synthase.
Ta
Question 39. Calculate the total ATP generated by complete break down of 1 glucose molecule.
From NADH =
From FADH2 =
Kreb’s cycle =
am
Glycolysis =
Total =
gr
le
(Refer video: Respiration_ Electron Transport Chain)
Te
5. Gaseous exchange in plants
Process involved in gaseous exchange in plants is diffusion. Direction of diffusion depends on-
Day time- Carbon dioxide given out during respiration by most animals is used for
photosynthesis. Therefore, only oxygen is released; which is a major activity during the day.
hi
During night time only respiration takes place. Therefore only carbon dioxide is released during
the night. We have already discussed the role of stomata in gaseous exchange in plants while
nt
discussing photosynthesis.
Te
Question 40. Stomata is absent in roots and stems of woody plants then how gaseous exchange takes
place in this part of plants?
hi
ba
Ta
@
am
a. Blood vessels
Unlike lower creatures which have open circulatory system, we humans have a well defined
network of closed channels for carrying the blood around. These channels are called blood
gr
vessels. We basically have five different types of blood vessels that are as follows.
le
(i) Arteries
These vessels carry blood away from the heart to the lungs and rest of the body. All the arteries
Te
carry oxygenated blood except the one carrying blood to the lungs. They have thick elastic
wall and carry blood under high pressure.
(ii) Arterioles on
The arteries break down to smaller vessels called arterioles. They also help in regulation of blood
flow.
(iii) Capillaries
es
The arterioles further branch to form capillaries which are the narrowest vessels. They help in the
exchange of gases as diffusion is easy through their thin membrane.
hi
(iv) Venules
The capillaries then lead to comparatively thicker vessels called the venules. These are almost as
nt
veins carry deoxygenated blood except the on which carries blood from the lungs to the heart.
They have walls thinner than arteries and have valves.
hi
Question 41. Identify the parts labeled A, B, C, D and E in the given diagram.
ba
Ta
@
Question 42. Can you guess why capillary walls are only one cell thick? Why do you think there are
pores in capillary walls?
am
gr
le
Misconception: Arteries are usually defined as vessels which carry oxygenated
Te
blood and veins are usually defined as vessels which carry deoxygenated
blood.
Clarification: Arteries are the vessels which carry blood away from the heart
on
and veins are the vessels which carry blood to the heart. Most of the arteries
carry oxygenated blood except pulmonary artery, which carried deoxygenated
blood from the heart to the lungs. Similarly, most of the veins carry
es
deoxygenated blood except pulmonary vein which carries oxygenated blood
from the lungs to the heart.
hi
Question 43. Why do you think arteries have thicker walls than veins?
Te
hi
ba
Ta
Question 44. When you get hurt, the area around the wound begins to turn red. Similarly, when you
blush, the skin appears to turn red. Can you explain how the structure of arteries facilitates this?
@
Question 45. Varicose veins occur when veins are unable to prevent backward flow of blood in places
where high blood pressure occurs such as in the feet. This causes swelling of the veins and can be
very painful. Malfunctioning of which structural part of the veins lead to this condition?
am
gr
le
(Refer video: Circulation_Arteries, Veins and Cappillaries II)
Te
b. Heart
It is the pumping organ of the body which is located in the thoracic region between the lungs with
on
its tip slightly tilted towards the left. We human beings have a four chambered heart which is
important for avoiding the mixing up of oxygenated blood with deoxygenated blood. Our heart
consists of two atria and two ventricles. The atria form the upper chambers and the ventricles
es
form the lower chambers.
hi
The oxygenated blood from the lungs are brought to the left atrium by the pulmonary vein. The
atrium relaxes as it receives the blood from the pulmonary vein. Once the left atrium is filled, the
nt
left atrio-ventricular valve opens and the blood goes to the left ventricle. During this step, the
atrium conracts and the ventricle relaxes. As soon as the blood is transferred, the atrio-ventricular
Te
valve closes and the semilunar valve opens and the left ventricle contracts to send the blood into
the aorta which then delivers the oxygenated blood to rest of the body.
hi
Meanwhile, the deoxygenated blood from all over the body is brought into the right atrium of the
heart by the vena cava. The superior vena cava brings blood from the upper part of the body and
ba
the inferior vena cava brings in blood from the lower part of the body. The right atrium relaxes to
receive all this blood. The right atrio-ventricular valve then opens, the right atrium contracts and
blood is pushed into the right ventricle in this process. The right ventricle relaxes to receive the
Ta
blood. It then contracts and the semilunar valve opens sending the blood to the pulmonary artery
which takes the blood to the lungs for gaseous exchange.
@
Since, pushing the blood to all over the body and into the lungs needs more pressure, the
ventricles have thicker wall compared to atria. In this entire process, the blood enters the heart
twice. Thus, this kind of circulation is called double circulation. We have two kinds of circulation
– Pulmonary circulation and systemic circulation.
am
gr
Fig 8. Double circulation
le
Question 46. Label the following diagram correctly
Te
on
es
hi
nt
Te
hi
ba
Ta
c. Lymphatic System
This is another system of transportation present in our body which consists of lymph, lymph
vessels, lymphatic capillaries and lymph nodes. Lymph is a colourless fluid formed by escape
of plasma, some proteins and cells from the pores present in blood vessels. They get into the
intercellular spaces and form the tissue fluid. Like the blood vessels, the lymphatic capillaries
join to form lymphatic vessels. The lymphatic system is required to perform a number of
am
functions in the body such as - Collection of intercellular fluid through the lymph vessels and
return it to blood circulation. The lymph vessels present in villi of small intestine absorb
lipids and take them to blood circulation. Lymphatic system also plays a vital role in
gr
providing immunity.
le
7. Transportation in Plants
Plants require a transportation system to transport the components required for photosysthesis to
Te
the specified site; also to carry the food produced to different parts of the plant. However, due to
the low energy requirement of plants as compared to humans, they have a slower transportation
system. on
a. Transport of water
Plants take up water from the soil through roots. The water taken is required by plants to carry
es
out photosysthesis. It thus has to be transported to the site of photosynthesis. This target is
achieved by xylem. It forms the water conducting system for plants. There are two drivng
hi
forces which together contribute to the conduction of water. The first one is difference in
ionic concentration between the root and soil and the second is transpiration, that is the loss
nt
of water in the form of water vapour from the aerial parts of the plant. This causes a
transpirational pull in the water column.
Te
carried to various parts of the plant. This is achieved by the vascular tissues known as phloem.
ba
Question 47. Transpiration happens in the daytime. How do you think plants conduct water in the
night time?
Ta
@
8. Excretion in Humans
During the various life processes carried out in our body as we discussed so far, a number of
waste products are generated. The removal of these metabolic wastes from the system is known as
excretion. Humans have a specialized excretory system to carry out excretion.
The human excretory system is made up of a pair of kidneys, a pair of ureters, a urinary bladder
and a urethra. Various nitrogenous wastes like urea or uric acid are removed from the blood in
am
kidneys.
gr
Question 48. Label the following diagram of human excretory system.
le
Te
on
es
hi
nt
Te
hi
ba
Nephrons form the basic unit of filtration in kidneys. Kidneys eliminate the nitrogenous waste
from the body in the form of urine. The urine formed in the kidneys undergoes various levels of
@
filtration as it passes through the nephron. Various useful substances like glucose, amino acids
and salts are absorbed from the urine by the tubes in nephrons . The urine thus formed at the end
is passed on to the ureters and then stored in the urinary bladder until the bladder is full and we
get the urge to urinate.
am
gr
le
Te
on
Fig 9. Structure of Nephron
Question 49. Why does the urine sometimes turn more concentrated and sometimes too much
es
dilute?
hi
nt
Te
hi
ba
In the case of kidney failure, one of the solution can be replacing the defected kidney with an
artificial kidney, also known as hemodialysis. In this process, a device is set up to remove the
nitrogenous waste products from the blood through dialysis.
9. Excretion in plants
Plants excrete their waste matter in a manner different from animals. Excretion in plants depends
upon the type of plant. Some of the methods of excretion are - Gums, resins, rubber and latex are
exuded from various parts of the plant body. Crystals of certain chemical substances are stored in
the plant body, e.g. calcium oxalate crystals in the leaf of colocasia, calcium carbonate crystals in
the leaf of fig, etc. Some deciduous plants get rid of excretory matter when the leaves fall. In the
am
bark and wood part of the trunk, tannin is stored. This makes the wood appear dark. Some plants
will actively secrete wastes into the soil. Oxygen can be looked upon as a waste product of
photosynthesis and carbon dioxide a waste product of respiration; water is a waste product of
gr
both. Water will be lost through transpiration.
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
am
2. An organ that is expected to float in water is:
A. Heart C. Lungs
B. Liver D. Kidney
gr
3. A leaf has to be tested for the presence of starch. Why does it have to be boiled in alcohol?
A. To soften its tissue. C. To dissolve chlorophyll.
le
B. To make the leaf starch free. D. To dissolve iodine.
4. Which of the following statement is correct regarding breathing?
Te
A. We inhale only oxygen.
B. We exhale only carbon dioxide.
C. Breathing is also called cellular respiration. on
D. Inhalation and exhalation are two steps in breathing.
5. The physical process involved in dialysis is:
A. Diffusion C. Plasmolysis
es
B. Osmosis D. Crenation
6. How does the rate of breathing get affected for athletes while running?
hi
7. If you compare your rate of breathing by feeling your chest movement with the number of times a
fish opens and closes its mouth. Which will be higher and why?
nt
8. In the process of photosynthesis, food A is prepared which gets converted into food B. What are
A and B? Why is A converted to B?
9. While eating you are advised not to talk. Why are you advised to do so?
Te
12. Why is the rate of breathing much faster in aquatic organisms than those in terrestrial organisms?
13. Autotrophs synthesize food for the living world. Justify this statement in one sentence only by
ba
am
19. Hint – Think of the functions of pancreatic juice.
20. Hint – Recall the different steps involved in the process of respiration.
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction:
In our previous chapters we have learnt about various life processes necessary for being alive. All
these processes are interdependent but have you ever wondered that how the various systems in
am
our body communicate with each other? Your heart starts beating fast when you are scared but
who tells the heart that you are scared? Who tells the lungs that your body needs more oxygen
which increases the breathing rate?
gr
le
Te
on
The working together of various organs of the body of an organism in a proper manner to produce
appropriate reaction to a stimulus is called coordination. But the nervous system alone cannot do
all the control and coordination in complex animals hence the nervous system, in coordination
es
with the endocrine system communicates, integrates and coordinates with the various organs and
organ systems in the body.The nervous system
hi
The nervous system is composed of specialized tissues; called nervous tissue. The nerve cell or
neuron is the functional unit of the nervous system. Neuron is a highly specialized cell which is
nt
responsible for transmission of nerve impulses. A nerve and a neuron can be differentiated as
follows:
Neuron: The specialized cell, which constitutes the nervous tissue, is called neuron.
Te
a. Structure of Neuron:
As you have seen in the video, that structure of neuron can be compared with the structure of a
ba
tree. A typical neuron in a vertebrate (such as a human) consists of three major regions: a cell
body, dendrites and an axon. Like all cells, the entire neuron is surrounded by a cell membrane.
Ta
What functions do you think the three major regions of a neuron serve?
@
Axons generally divide and re-divide near their ends to form the axon terminals. The distal ends of
axon terminals are expanded into bulb – like structures which store chemicals called
neurotransmitters. These are responsible for passing the impulse from one neuron to another or from
one neuron to another tissue.
am
Did you know?
Longest axon of a neuron is around 15 feet
(Giraffe’s primary afferent axon from toe to neck)
gr
le
Te
Question 1. Label the different parts of the neuron shown in the figure given below.
on
es
hi
nt
Te
hi
ba
Question 2. If you cut your skin, it can regenerate, but after a stroke or brain injury, you can't replace
neurons. Why is it so? What might be the evolutionary significance of this?
Ta
@
Question 3. In which of the following neuron will the impulse transmission be faster – Myelinated or
non-myelinated? Why?
am
gr
le
Te
on
Question 4. The human body contains a large number of cells A which are very long and branched.
The longest branch of this cell is B whereas there are many small branches C. Any two A cells do
not join with one another completely in the human body. There is a microscopic gap, D between
every pair of adjacent A cells through which the impulses can pass.
es
Neurons are connected end to end with each other to transmit the nerve impulses. The junction
between two neurons or a neuron and a muscle fibre is called synapse. The points where neurons are
connected with the muscles are also called neuro – muscular junction.
am
gr
le
Te
Figure 1: Neuronal Synapse Figure 2: Neuro-muscular Junction
b. Types of neurons:
on
There are three types of neurons.
i. The first type is afferent or sensory neurons. These neurons receive signals from a sense
es
organ. There are five sense organs in our body: eyes, ears, nose, tongue and skin. These sense
organs contain receptors. A receptor is a cell (or group of cells) in a sense organ which is
hi
cold
am
c. Working of neurons:
gr
Working of a neuron can be understood by analyzing the situations in the battlefield. Direct
actions on the battlefield are relayed by military officers to those in the position of command. For
example, the squad leaders are like the neurons that are able to effectively convey to those higher
le
up the military command chain about what is happening on the ground. The squad leaders see
Te
what is happening, just as the neuron is able to interpret signals, sending them to the spinal cord
and brain. The squad leaders transmit information in a similar way as the neurons send
information to the central nervous system for processing. The squad leader on the ground in war
becomes an analog for the neuron. on
Did you know ?
es
The nervous system can be studied under two subdivisions: one is the central nervous system and
the other is the peripheral nervous system.
Ta
i. The Brain:
The role of brain is like the CPU of a computer. CPU takes the input, processes it and then the
output is displayed on the screen. Similarly, brain gets input from various nerves, processes it and
then sends the signal back to effector organs to work accordingly. Brain is protected by
membranous layers called meninges and it is housed inside a protective cover called the skull. It
is also bathed in a fluid called cerebrospinal fluid (CSF) that acts as a shock absorber. The brain
is divided into two hemispheres; left and right hemisphere that coordinate with each other for
proper functioning of the body.
am
A. ____________________
gr
B. ____________________
le
Te
C. ____________________
on D. ____________________
es
E. ____________________
hi
nt
Te
Brain can be divided into three parts. The first part is __________ or the cerebrum. It is the main
ba
thinking part of brain. It controls the voluntary actions and stores information in the form of
memory. The second part is the ___________; it includes the hypothalamus and the pituitary
gland that are majorly responsible for the chemical coordination in humans. The third part is the
Ta
__________; it includes the cerebellum, medulla oblongata and pons. Cerebellum controls
posture and balance of the body. Medulla is responsible for involuntary actions such as blood
pressure, salivation, vomiting, etc. Pons regulates respiration which is an involuntary action.
@
A. __________________________
B. __________________________
C. __________________________
am
D. __________________________
gr
E. __________________________
F. __________________________
le
G. __________________________
Te
H. __________________________
on
es
hi
Question 8. Try to tickle yourself. Are you able to do it? Give reason for your experience.
nt
Te
hi
ba
Question 9. Identify the part of your brain that controls the following actions:
Ta
Imagination, maintaining body posture, thoughts, digestion, sight, touch smell, heartbeat, hearing,
breathing, learning cycling
Cerebrum Cerebellum Medulla Pons
@
Question 10. The brain itself cannot feel pain because the brain does not have pain receptors. Then
how do you feel the pain when someone hits you on your head?
am
gr
le
Did you know ?
Human brain can store 5 times as much information as the
Te
Encyclopedia Britannica. Storage capacity of the brain in electronic
terms is 3 to 1,000 terabytes (1 terabyte= 1000 gigabytes).
on
es
It is the extension of brain. It is protected within vertebral column. Spinal cord is responsible
majorly for controlling ________________. Reflex action is spontaneous, involuntary and
automatic response to a stimulus to protect us from harmful situations. Before we move ahead
Te
Question 11.Based on the description given in the table above, define stimulus and response.
Spinal reflex: The reflexes that involve spinal cord are called spinal reflexes. Like the removal of
hand when we touch a hot flame. This can be understood by the diagram given below.
am
gr
Figue 3: A reflex Arc
le
Te
Misconception: Only spinal cord controls all the reflexes.
Clarification: The reflexes that involve the brain are called cerebral reflexes.
on
Cerebral reflexes occur in the organs present in the head because these organs
are directly connected to the brain. For example – our eyes are present in the
head. The automatic contraction of pupil of our eye in presence of bright light
es
is an example of cerebral reflex.
hi
spinal nerves. The cranial nerves emerge from the ________ and go to the organs in the head
region. The spinal nerves emerge from the _________ and go to the organs which are below the
Ta
head region.
PNS is divided into somatic nervous system and autonomous nervous system.
i. Somatic nervous system is the part of the peripheral nervous system associated with skeletal
@
muscle and controls voluntary body movements such as eating, dancing, walking, etc.
ii. Autonomous nervous system is composed of a chain of nerve ganglion which runs along the
spinal cord. It controls all the involuntary actions of the human body. The autonomous
nervous system has two divisions; sympathetic and parasympathetic division.
_____________nervous system prepares the body for violent action against abnormal
conditions. Just like, when a dog chases you. ________________ nervous system is more
concerned with re-establishing normal conditions after the violent act is over. Just like, when
you feel safe from the dog that was chasing you; your heart beat and breathing comes back to
normal rate. Both these systems are antagonistic with each other.
Question 11. Based on the discussion for sympathetic and parasympathetic nervous systems, write
the impact of sympathetic nervous system on different organs within the space provided.
am
gr
le
Te
on
es
hi
4. Movements in Plants
Question 13. Since plants do not have a nervous system they do not show any kind of coordination.
Do you agree with this statement? Why or why not?
am
gr
le
Te
Unlike animals, plants do not have nervous system and sense organs like eyes, ears, or nose, etc.,
but they can still sense things. This job of sensing and responding is taken by hormones in plant
on
which are called phytohormones. But before we discuss about the phytohormones, let us study the
different movements in the plants. Plants show different kind of movements towards various
stimuli. There are two types of movements seen in plants – Nastic movement and Tropic
es
movement.
hi
a. Nastic Movement
nt
The movements which do not depend on the direction of the stimulus are called nastic
movements. For example - folding of leaves of a sensitive plant (Mimosa pudica) on touching
Te
it. Here stimulus is touch. Hence this type of movement is called thigmonastic movement.
hi
ba
Ta
@
Question 14. Explain the mechanism of folding of leaves of Mimosa pudica in response to touch.
Similarly, the opening up of petals of dandelion flowers in the morning in bright light and closing
in the evening when the light fades is another example of nastic movement. Here, the stimulus is
light so it is called photonastic movement.
b. Tropic Movement
The movements which are in a particular direction in relation to the stimulus are called tropic
movements. If the movement is towards the direction of stimulus it is called positive tropism and
am
if the movement is away from the direction of stimulus it is called negative tropism.
Question 15. Given below are different types of tropisms seen in plants. You have to identify which is
gr
positive tropism and which one is negative tropism and then try to define them. One example is
done for your convenience.
le
(i) Phototropic movement: This is response of plants towards light.
Te
on
es
hi
nt
Positive phototropism: If the plant part moves towards the light it is called positive phototropism.
Negative phototropism: If the plant part moves away from the light it is called negative
phototropism.
Te
Positive geotropism:
Negative geotropism:
am
gr
le
Positive hydrotropism:
Te
Negative hydrotropism:
on
Misconception: Shoots are only positively phototropic.
Clarification: Shoot tips of some vines, such as English ivy, are negatively
phototropic. If vine shoot tips were positively phototropic, they would grow
es
away from walls or tree trunks, rather than climb them.
hi
Similarly, there are two more tropisms; they are thigmotropism and chemotropism.
(iv) Thigmotropism: This movement of plant part is in response to touch. For example, the tendrils
nt
are positively thigmotropic which means that they grow towards things they happen to touch
as you can see in the given figure.
Te
hi
ba
Ta
@
Roots also rely on touch to navigate their way through the soil. Generally, roots have a negative
touch response, meaning when they feel an object, they would grow away from the object. This
allows the roots to go through the soil with minimum resistance by avoiding obstacles on their
way of growth. In this case it is negative thigmotropism.
(v) Chemotropism: The growth or movement of a plant or plant part in response to a chemical
stimulus is called chemotropism. You will understand chemotropism better once you answer
this question.
Question 16. The top part A of the flask shaped reproductive organ X in the flower of a plant secretes
a sugary substance into its lower part B. This substance goes towards the bottom part C of the
flask shaped organ. When a tiny grain D coming from the top part E of another reproductive
am
organ Y in the flower falls on part A , it grows a long tube F through the organ X in response to
the sugary substance and reaches the bottom part C of flask shaped organ to carry out fertilization.
gr
b. Name parts A ,B and C of flask shaped organ.
c. Name grain D and part E of organ Y.
le
d. Name the tube F.
Te
on
es
Question 17. Breifly discuss about the significance of the following movements for the plant.
hi
am
a. Auxins
Auxins promote cell enlargement and cell differentiation in plants. It also promotes fruit growth.
gr
It controls a plant’s response to light and gravity. They are produced by cells at the tip of stem and
roots.
le
Question 18. Auxins are responsible for growth of shoot towards light. Explain this with the help of a
Te
diagram.
on
es
hi
nt
Te
Question 19. How do auxins promote the growth of a tendril around a support?
hi
ba
Ta
@
b. Cytokinin
Cytokinin promotes cell division and lateral growth in plants. It helps in breaking of the dormancy
of seeds and buds. It delays the ageing in leaves. It promotes fruit growth. It is found in areas of
rapid cell division such as seeds and fruits.
c. Gibberellins
am
Gibberellins work along with auxin for the growth of plants. It also helps in breaking of the
dormancy in seeds and buds. It is responsible for production of seedless fruit.
gr
d. Abscisic acid
Abscisic acid promotes the dormancy in seeds and buds. It promotes the closing of stomata. It
le
promotes the wilting and falling of leaves.
Te
e. Ethylene
6. Hormones in Animals
Remember in the beginning of lecture I, we discussed that in addition to nervous system, the
endocrine system also helps in coordinating the activities of our body. Endocrine system works by
@
secreting various hormones in the blood. Hormones are chemical messengers that are secreted
directly into the blood, which then carries them to target organs and tissues of the body to exert
their functions. There are different hormones that act on different aspects of bodily functions and
processes.
am
gr
le
Te
The endocrine glands present in the human body are: Pineal gland, Hypothalamus, Pituitary
gland, Thyroid gland, Parathyroid gland, Thymus, Pancreas, Adrenal glands, Testes (only in
males) and Ovaries (only in females). The location of these glands is shown in the figure given
on
below.
es
hi
nt
Te
hi
ba
Ta
@
You will study the details of each gland in your higher grades. Here we will restrict our discussion
to some important glands only.
a. Pituitary Gland
The pituitary gland is a pea-sized structure located at the base of the brain, just below the
____________, to which it is attached via nerve fibers. Pituitary is called the _________ as it
produces hormones that control other glands.
One of the main hormones produced by pituitary is the __________hormone. This hormone is
am
responsible for growth of the body. Excessive secretion of growth hormone causes gigantism
and lack of growth hormone in a developing child causes dwarfism.
gr
le
Te
on
es
hi
b. Thyroid Gland
A large ductless butterfly shaped gland in the neck. It secretes hormones which regulate
hi
Question 22. Working of thyroid gland is regulated via negative feedback loop. Explain.
Question 23. There are two packets of salt available in the market: one is iodised salt that costs 15
rupees per kilogram and the other is non-iodised salt that costs 10 rupees per kilogram. Which salt
should you buy and why?
am
gr
le
(Refer video: Hormones in Animals_Thyroid Gland)
Te
c. Adrenal Glands
on
Adrenal glands are located above the __________. They secrete __________ hormone which
is also known as flight or fight hormone. Adrenal glands also secrete aldosterone that serves
as the principle regulator of salt and water balance in our body.
es
Question 24. Identify the incorrect statement(s) regarding the functions of adrenaline and rewrite the
hi
correct statement(s).
nt
Question 25. Stress kicks the endocrine system into high gear. Justify the statement.
@
d. Pancreas
Pancreas plays both endocrine and exocrine functions in our body. As an endocrine gland it
secretes hormones and as an exocrine gland it secretes ________ enzymes. The digestive
enzymes of pancreas are discussed in detail in the chapter life processes. Here we will
concentrate on the endocrine functions of pancreas. The two hormones secreted by pancreas
are _________ and glucagon.
am
Question 26. Identify the hormone secreted by pancreas in the following cases:
gr
b. When the blood sugar level decreases.
le
Te
on
Question 27. If a person is advised to reduce sugar in his diet by a doctor then which disease might he
es
be suffering from? Also, mention the hormone whose deficiency leads to such condition.
hi
nt
Te
hi
ba
e. Testes
Testes are a pair of glands which are present only in males (men). They secrete male sex
@
You will study testes and ovaries in details in the topic - Reproduction in Humans.
Do you know?
Not all hormones come from the endocrine system. For instance, the
placenta of a pregnant woman secretes a few hormones, including estrogen
and progesterone. And the stomach releases the hunger-inducing hormone
am
ghrelin and gastrin, which stimulates the secretion of gastric acid.
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
am
2. Which is the correct sequence of the components of a reflex arc?
A. Receptors→ Muscles→ Sensory neuron→ Motor neuron→ Spinal cord
B. Receptors→ Motor neuron → Spinal cord → Sensory neuron → Muscle
C. Receptors → Spinal cord → Sensory neuron → Motor neuron → Muscle
gr
D. Receptors → Sensory neuron → Spinal cord → Motor neuron → Muscle
3. Select the miss-matched pair
A. Adrenaline: Pituitary gland
le
B. Testosterone: Testes
C. Estrogen: Ovary
Te
D. Thyroxin: Thyroid gland
4. The growth of tendril in pea plants is due to
A. effect of light
B. effect of gravity on
C. rapid cell divisions in tendrillar cells that are away from the support
D. rapid cell divisions in tendrillar cells in contact with the support
5. When a person is suffering from severe cold, he or she cannot
es
A. Differentiate the taste of an apple from that of an ice cream
B. Differentiate the smell of a perfume from that of an agarbatti
C. Differentiate red light from green light
hi
f) ______ is the movement of plant part in response to the pull of earth’s gravity.
g) The movement of plant part in response to certain chemicals is called ______.
h) ______ is the reflex centre of the brain.
@
i) ______ is a structure associated with both nervous system and endocrine system.
9. How do we detect the smell of an agarbatti (incense stick)?
10. Match the following
I II
a. Cerebrum i. Motor coordination
b. Cerebellum ii. Reflex Acton
c. Spinal cord iii. Main thinking part of brain
11. a. Label the parts marked A to H in the given figure:
am
gr
le
b. Suppose there is a cyst formation in the part of brain labeled as ‘G’ due to which its activity
becomes partially inactive. In that case, he will face difficulty in performing what kind of
Te
activities?
12. How is brain protected inside the human body?
13. What do you mean by reflex action? Give 2 examples of reflex actions?
14. How is the movement of the leaves of a sensitive plant different from the movement of its root
on
towards light?
15. Identify the two types of reflexes given below and differentiate between them:
i. When we touch a hot plate, we immediately move away our hand.
ii. Typist is typing a letter without looking at the typewriter keys.
es
Or
Why is the use of iodized salt advised?
nt
tropic movements. Do you agree with this statement? Why or why not?
20. Identify the endocrine gland shown in the given figure. Also, name the hormone secreted by
them and its function in our body.
hi
ba
Ta
@
SOLUTION
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer to video: Introduction)
am
a. Wave-Particle Duality
Light is a form of energy having both wave and particle nature. Light behaves as a wave,
gr
or as particles, depending on what we do with it, and what we try to observe. To
understand light you have to understand that whatever we call light is only what is visible
le
to us. Visible light is the light that humans can see. Scientists also call light an
electromagnetic wave. Visible light is only a small portion of whole electromagnetic
Te
(EM) radiation.
Question 1.Suppose you are in an empty room which contains only UV-light. Will you be able to see
the walls? What is the range of wavelength of light we can see?
on
es
hi
nt
Te
hi
ba
Ta
@
Visible light is only a small portion of whole electromagnetic spectrum that is perceived
by our eyes. A typical human eye responds to wavelengths from about 400 – 700 nm.
am
gr
Figure 8: Visible Spectrum
le
Te
Did You Know?
The key thing to remember is that light and EM radiation carry “energy”. The quantum
nt
theory says that light consists of very small bundles of energy particles. We call those
small particles photons, and the wavelength determines the energy and type of EM
Te
radiation, and the number of photons tells you how much radiation there is. A lot of
photons will give you brighter and more intense type of light. Fewer photons will give
you a very dim and less intense light.
hi
ba
am
gr
Particle
le
Te
on
es
Ray
hi
nt
Te
hi
But, in this chapter, we will neither study light as a wave nor as a particle. We will study
light just as a “ray”. That is, a straight line moving through space and obeying some laws
ba
of physics. And that is why when you’ll go to higher classes; this chapter will be renamed
as “Ray Optics”.
Ta
Question 3. What is the speed of light? Can anything else move faster than light? Explain.
@
am
Scientists in Germany succeeded in stopping light – the fastest thing in
the universe - for a total of 60 seconds using a technique called
Electromagnetically Induced Transparency. If you want to know
more, Google is your friend.
gr
le
Te
b. Fermat’s Principle of Least Time
The one principle that light always obeys is called “Fermat’s principle of least time”. It
says,
on
“Light always takes the quickest path.”
es
Question 4. Shortest path is always the quickest path. Is the statement true or false? Explain.
hi
nt
Te
hi
Why does light always take the quickest path? Honestly, we don’t know. We have just
ba
seen light following that rule each and every time. And we made it into a rule.
Ta
Question 5. Fermat’s principle of least time can be used to prove the following two statements.
Explain how?
@
am
gr
le
When a light ray falls on a surface, it can either get reflected by it or absorbed by it or it
can just pass through it. And the result will depend on the atoms that make up the body
Te
and also on the way that they are arranged in the body.
on
es
hi
nt
Te
Let us go to each of the cases one by one. So at first, let us see what happens in case of
hi
reflection.
ba
2. Reflection of Light
(Refer to video: Laws of Reflection)
Ta
a. Laws of Reflection
The phenomenon of the bouncing back of light, when it hits a polished surface is
@
known as the reflection of light. From the earliest recorded history, humans have been
fascinated by reflections. People were bewitched by their own reflection in a pool of
water and reflections were so extraordinary that magic powers were ascribed to the
mirrors in fairy tales. Seeing own image have advanced from reflective pools and
polished metal surfaces to clear glass and bathroom mirrors.
am
Figure 10: Light Ray Falling on a Reflective Surface
gr
Question 6. Draw a diagram and describe the two laws of reflection of light.
le
Te
on
es
Question 7. How do we see things around us? How do we see colors? Suppose you are in a room,
ba
which has four boxes – black, white, red and blue. If the room is illuminated by red light, what color
will the boxes appear?
Ta
@
3. Plane Mirrors
am
gr
le
Te
Figure 11: Image Formation by a Plane Mirror
on
There are two types of images that can form after reflection from a mirror, real image and
virtual image.
es
hi
am
Erect
Virtual
Laterally Inverted
gr
Question 9.Two plane mirrors are kept perpendicularly on x-axis and y-axis meeting at the origin. On
le
the mirror on the y-axis a ray is incident on it at an angle of 30º from the y-axis. Find the angle from
the x-axis at which the ray will leave the 2nd mirror on the x-axis?
Te
on
The image produced by a plane mirror is horizontally inverted - that is reversed left to right. Look at
es
yourself in a plane mirror and raise your right hand - your image raises its left hand. This is called
lateral inversion.
hi
Question 10.What is the cause of lateral inversion? Why is it that the image is flipped only
nt
Question 11.A famous artist and scientist, Leonardo da Vinci, hid all of his ideas and inventions by
writing all of his work backward. Use your mirror to decipher Leonardo’s secret code:
@
Question 12.When a plane mirror is rotated through an angle of 10º in clockwise direction and
incident ray is rotated by 5º in the counterclockwise direction, by what angle will the reflected beam
rotate?
am
gr
le
Te
a. Images Formed in a Pair of Plane - Mirrors
on
The object and images formed by the two inclined mirrors lie on the circumference of a circle
with center at the point of intersection of the two mirrors and radius equal to the distance of
es
Let us now that we have seen reflections in case of a plane mirror which was quite
Te
simple! Now let us go complicate things and see the kind of images formed due to curved
kind of mirrors.
hi
4. Spherical Mirrors
ba
Concave mirror is also known as converging mirror and convex mirror is also known as
diverging mirror.
am
gr
le
Te
on
es
hi
Aperture (A)
hi
Pole (P)
ba
Principal Axis
@
Focus (F)
b. Special Rays
am
Parallel to Principal Axis: Through Focus:
gr
le
Te
Through Center of Curvature:
on
Through Pole:
es
hi
nt
Te
hi
allowing visible light to pass. These can be used to separate useful light
from unneeded infrared to reduce heating of components in an optical
device.
Ta
@
Object at infinity
am
gr
Object beyond C
le
Te
Object at C
on
es
hi
nt
Object at F
Ta
@
am
gr
d. Convex Mirror Image Formation
le
Te
Characteristics of Image Ray Diagram
Object at infinity on
es
hi
nt
Te
a. Mirror Formula
Sign Convention
am
Object is always placed to the left of the mirror. Pole, P is taken as origin, hence all the
distances are measured from the pole. Distances measured
gr
Right of the origin (+ x-axis) are taken positive.
Left of the origin (– x-axis) are taken negative.
le
Perpendicular to and above principal axis (+y-axis) are taken positive
Perpendicular to and below principal axis (–y-axis) are taken negative
Te
on
es
hi
nt
Te
hi
Mirror Formula
Ta
Magnification
am
gr
Question 14.An object of height 5cm is placed at twice the radius of curvature of a concave mirror of
focal length 30 cm. Find the position of image, magnification and height of the image formed
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Question 15. List the various uses and applications of spherical mirrors – concave and convex.
am
gr
le
Te
on
es
Question 16.A spherical mirror forms three times magnified real image of an object placed in front of
hi
it. If the focus is situated at a distance of 9 cm from the pole, calculate how far the image is situated.
What type of mirror is used?
nt
Te
hi
ba
Ta
@
6. Refraction of Light
(Refer to video: Refraction through a Glass Slab and Refractive Index)
The phenomenon of bending of light when light goes from one medium to another is
known as refraction of light.
am
Question 17.What is the cause of refraction?
gr
le
Te
on
es
Speed of light is fastest in vacuum. In air, it has slightly lower speed but in this chapter
hi
we will ignore that and thus we will use air/vacuum interchangeably. When light rays
goes from vacuum/air to any other medium, its speed slows down. Absolute refractive
nt
index of that medium is defined as the “factor by which speed of light is slowed down in
that medium as compared to vacuum”. It is simply called refractive index of the
Te
medium.
hi
ba
Question 18.If light travels with a speed of in medium 1 and in medium 2, how will you
represent refractive index of medium 1 with respect to medium 2?
Ta
@
Question 19. Glass and water have a refractive index of 1.52 and 1.34 respectively. What is the
refractive index of glass w.r.t. water? How much time will light take to pass through a hypothetical
tube of 40,000 km half filled with water and other half filled with glass. Take ‘c’ = 3 x 108 m/s.
am
gr
le
Te
on
es
hi
nt
Light goes from Rarer to Denser medium: Light goes from Rarer to Denser medium:
am
gr
le
Te
Figure 15: Refraction through a Glass Slab
As you can see, here refraction occurs at two surfaces. One when light enters into the
glass and another when it comes out of it. The light ray, which comes out of the glass, is
on
called emergent ray and the angle it makes with the normal is called as angle of
emergence, .
Question 21.A ray is incident on a glass slab of refractive index √3 from air at an angle of 60º from
es
the surface. What is the angle of refraction? How much time will light take to come out of glass slab if
hi
slab is 10 cm thick?
nt
Te
hi
ba
Ta
@
Lateral Displacement:
am
Angle of deviation:
gr
le
Te
on
Question 23.What is the angle of deviation in each of the following cases?
es
Cases Angle of Deviation
hi
Normal refraction
Te
7. Spherical Lens
(Refer to video: Spherical Lens)
Ta
am
Figure 16: Spherical Lenses
Question 24.Why is a concave lens known as a diverging lens and convex as a converging lens? What
gr
can you say about their foci? Why do both the lenses have two center of curvatures while mirrors only
had 1?
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
am
Focus (F):
gr
le
Focal Length (f):
Te
on
Focal length is half of the radius of curvature.
es
hi
Question 26. Prove that focal length is equal to half the radius of curvature. What are the assumptions
nt
b. Special Rays
We call some rays special ray because when these rays pass through any lens, the
outcome is known already. That is for them we know what will be the output refracted
ray without doing any calculations.
am
Parallel to the Principal Axis:
gr
le
Te
Through Optical Center:
on
es
hi
nt
Te
Through Focus:
hi
ba
Ta
@
Now let us see the ray diagram and nature of image formed for different positions of objects
from the pole.
Object at infinity
am
gr
Object beyond C
le
Te
Object at C on
es
hi
Object at F
ba
Ta
am
Object at infinity
gr
le
Te
Object anywhere but infinity
on
es
hi
nt
Te
Clarification: Blocking a part of the lens surface will just reduce the
intensity of the image.
ba
Ta
a. Lens Formula
Lens formula gives us a relationship between object distance ( ), image distance ( ) and
am
the focal length ( ) of a lens.
Sign Convention
gr
Optical center, O is taken as Origin; hence all the distances should be measured from O.
le
Distances measured
Right of the origin (+ x - Axis) are taken positive
Te
Left of the origin (– x-Axis) are taken negative
Perpendicular to and above principal axis (+y-Axis) are taken positive
Perpendicular to and below principal axis (–y-Axis) are taken negative
on
Lens Formula
es
Magnification
hi
nt
Question 27.Find the position and the nature of image of an object 5 cm high and 10 cm in front of a
Te
am
gr
le
Te
on
es
c. Power of a Lens
hi
power of a lens. It is defined as the reciprocal of its focal length and is represented by
letter, P. The S.I. unit of power of a lens is "diopter" denoted by 'D' and it is equal to m-1.
Te
If any optical instrument has many lenses of power then the net power of the
combination of lenses will be
@
Alternatively,
Question 28.Two thin lenses of power +4.5 D and -3.5 D are placed in contact. Find the power and
focal length of the lens combination. Will the combination behave as a concave lens or a convex lens?
am
gr
le
Te
on
Question 29.On a number line, two convex lenses are placed. At origin is the lens 1 with focal length
of 30 cm and on 100 cm on number line is the lens 2 with focal length of 40 cm. An object is placed at
the point of 40 cm. Find the positions of any three images.
es
hi
nt
Te
hi
ba
Ta
@
am
state characteristics of the image formed.
5) What is “Focus”? Where will the image form, if you put an object at focus in case of a
Concave mirror, Convex mirror and Plane mirror.
gr
6) An object of height 5 cm is placed at 20 cm from a concave mirror of focal length 15 cm.
Find the nature and height of the image formed?
le
7) A dentist uses a concave mirror of radius of curvature 3 cm and places an object at a distance
of ‘x’ cm from the mirror to get a magnification of +5. What is value of ‘x’?
Te
8) Define absolute refractive index of a medium and relative refractive index.
A) If absolute refractive index of a medium is 1.5, what is the speed of light in that
medium?
B) If speed of light in medium 1 and medium 2 are 2 × 108 m/s and 1.5 × 108 m/s
on
respectively, then find the refractive index of medium 2 with respect to medium 1.
9) What is “Snell’s Law”? A light ray from a medium having refractive index 1.5 is incident on
another medium at an angle of 30°. If angle of refraction is 60°, find the refractive index of
es
undergo refraction.
11) An object of height 9 cm is placed at a distance of 18 cm from a concave lens of focal length
nt
12 cm. Find the nature and height of the image obtained. Draw a ray diagram showing the
image formation.
Te
12) The size of our eyeball is let’s say, 2.5 cm. When we are reading novel kept at 25 cm from
our eye, what is the power of eye lens at that time?
hi
B) Concave mirror
C) Convex mirror
D) Concave lens
@
E) Convex lens
16) What is the speed of darkness?
A) Same as the speed of light
B) More than the speed of light
C) Less than the speed of light
D) Question doesn’t make sense
17) If two plane mirrors are perpendicular to each other and 1 = 40°, then find the value of 2.
am
A) 40°
B) 50°
C) 30°
D) 90°
gr
18) The focal length of a concave mirror is 10 cm. The position of the object that is useful for
getting an enlarged image, which can be caught on a screen is
le
A) Object placed at a distance of 5 cm from the mirror.
B) Object placed at a distance of 15 cm from the mirror
Te
C) Object placed at a distance of 20 cm from the mirror
D) Object placed at a distance of 35 cm from the mirror
19) What is the physical significance of refractive index of a medium?
on
A) It tells how faster the light is moving in that medium.
B) It tells the material density of the medium.
C) It says how much air resistance the medium has.
es
D) It doesn’t have any significance.
20) Refractive index of diamond with respect to vacuum is 2.5, and then the velocity of light in
hi
diamond is:
A) 25 × 108 m/s
nt
SOLUTION
hi
6. Real and hi = - 15 cm
7. 6/5
ba
11. 3.6 cm
12. +44 D
16. A
@
17. B
18. B
19. A
20. C
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Human Eye
(Refer to video: Human Eye)
am
Eyes are one of the most sensitive sense organs in the human body. Our eyes can interact
with a part of the electromagnetic spectrum (very small range) and thus enabling us to see
gr
this beautiful world.
le
Question 1.How do we see objects around us? What are the necessary factors to see objects?
Te
on
es
hi
nt
Te
hi
ba
Ta
@
The light rays reflected from the objects/surfaces fall on the exposed portion of the eye.
These rays enter into the eye through the pupil and falls on a crystalline convex lens. The
am
Sclera
gr
Cornea
le
Iris
Te
Pupil
Crystalline Lens
on
es
Aqueous Humor
hi
Vitreous Humor
nt
Ciliary Muscles
Te
Retina
hi
ba
Optic Nerve
Ta
The head of the optic nerve is devoid of photosensitive cells. Hence, no image is formed at
that point and that is called blind spot of the eye.
am
gr
le
Te
Question 3.On sunny days, when you enter a dimly lit room, you are unable to see clearly for a
moment. Why does this happen?
on
es
hi
nt
Te
hi
ba
Misconception: The lens is the only part of the eye responsible for
focusing light.
Ta
Clarification: Lens is not the only part that helps to focus the light:
aqueous humor, vitreous humor and lens they all together help in
focusing the light.
@
b. Color Perception
Retina consists of two types of light sensitive cells – rod cells (RODS) and cone cells
(CONES). The rod shaped cells respond to the intensity or brightness of the focused light
Question 4.Why is it so that in dim light we are not able to see colors well or distinguish between
them?
am
gr
le
Te
Question 5.What do you think will be the image seen by a person who has less than normal number of
on
CONES in the eye?
es
hi
nt
Te
hi
a. Persistence of Vision
ba
The image of an object seen persists on the retina for 1/16th second even after the
removal of the object. This sensation in the eye for some time is called persistence of
vision.
Ta
Question 6.How does persistence of vision make its use in cinematography? Explain briefly.
@
am
gr
le
Te
2. Power of Accommodation and Defects
(Refer to video: Power of Accommodation and Defects) on
a. Power of Accommodation
One of the most amazing things about human eye is that it can change its focal length
es
depending on the distance of objects. It is the ciliary muscles that can modify the
curvature of the lens to change its focal length. The ability of the eye lens to adjust its
hi
To see the nearby objects clearly, the focal length of the lens should be ___________. For
Te
this, the ciliary muscles ___________ to ___________ the curvature and thereby decrease
the focal length of the lens. Hence, the lens becomes ___________ to ___________ the
power of the eye.
hi
ba
Ta
@
To see a distant object clearly, the focal length of the lens should be ___________. For
this, the ciliary muscles ___________ to ___________ the curvature and thereby increase
am
gr
Figure 3: Seeing Far Away Objects
The minimum distance of the object by which clear distinct image can be obtained on the
le
retina is called least distance of distinct vision. It is equal to 25 cm for a normal human
Te
eye and it is also known as near point of our eye.
Question 8. What do you mean by far point? What is the far point of a normal eye?
on
es
hi
nt
The loss of power of accommodation of an eye results in the defects of vision. There are
Te
four defects of vision called refractive defects. They are myopia, hypermetropia,
presbyopia and astigmatism.
hi
b. Myopia (Short-sightedness)
ba
Myopia is a defect of vision in which a person clearly sees all the nearby objects, but is
unable to see the distant objects comfortably. A myopic eye has its far point nearer than
Ta
infinity. It forms the image of a distant object in front of its retina.Myopia is caused by
Increase in curvature/power of the lens
Increase in length of the eyeball
@
am
gr
le
Te
on
Question 9.Let’s say far point of a myopic eye is 50cm. It means that he can only see till 50 cm. So,
what should be the power of the concave lens so that he can see objects placed at infinity?
es
hi
nt
Te
c. Hypermetropia (Long-sightedness)
hi
Hypermetropia is a defect of vision in which a person can see distant objects clearly and
ba
distinctively, but is not able to see nearby objects comfortably and clearly. A
hypermetropic eye has its least distance of distinct vision greater than 25 cm.
Ta
am
gr
le
Te
Let us say the near point of a hypermetropic eye is not 25 cm but 80cm. It means that he can only see
on
from 80 cm to infinity. So, a convex lens has to be applied which can take an object from 25 cm and
form its image at 80 cm so that our eyes can see it.
es
Question 10.Find the power of the lens required for the above described case?
hi
nt
Te
hi
ba
Some people are born with two differently colored eyes. This is called
“heterochromia” of the eye. In complete heterochromia, one iris is a different
@
color from the other. In sectoral heterochromia, part of one iris is a different
color from its remainder and finally in central heterochromia there are
spikes of different colors.
Presbyopia is a common defect of vision, which generally occurs at old age. A person
suffering from this type of defect of vision cannot see nearby objects clearly and
distinctively. A presbyopic eye has its near point greater than 25 cm and far point closer
than infinity.
am
gr
le
Te
on
es
e. Astigmatism
Astigmatism is an imperfection in the curvature of your cornea — the clear, round dome
covering the eye's iris and pupil — or in the shape of the eye's lens. Normally, the cornea
@
and lens are smooth and curved equally in all directions, helping to focus light rays
sharply onto the retina at the back of your eye. However, if your cornea or lens isn't
smooth and evenly curved, light rays aren't refracted properly. This is called a refractive
error.
am
gr
le
Te
on
3. Refraction and Dispersion of Light through Prism
es
Prism has two triangular bases and three rectangular lateral surfaces. These surfaces are
inclined to each other. The angle between its two lateral faces is called Angle of Prism
Te
(A).
hi
ba
Ta
@
am
gr
Angle of Deviation,
le
But,
Te
So,
through the prism, the white light is separated into its component colors – Violet, Indigo,
Blue, Green, Yellow, Orange and Red (VIBGYOR).The band of colors obtained is
nt
known as spectrum.
Te
hi
ba
Ta
@
am
gr
le
Te
Misconception: A glass slab does not disperse white light into
constituent colors.
Clarification: In the case of a glass slab, the opposite sides are parallel
on
and therefore different colors emerge parallel to each other and are
seen simultaneously.
es
Question 15.What is the reason behind the phenomena of dispersion of light?
hi
nt
Te
hi
ba
Ta
@
c. Rainbows
(Refer to video: Be More Curious!)
am
gr
le
Te
Figure 7: Formation of Rainbow
on
Question 16. What is the reason behind the appearance of a secondary rainbow? Why is it fainter than
the first rainbow?
es
hi
nt
Te
hi
ba
Ta
am
gr
le
Te
Figure 8: Apparent Position of Stars
b. Twinkling of Stars
nt
Distant stars act like a point source of light. As the physical condition of earth’s
atmosphere is not stationary, the beam of light from stars keeps on deviating from its
Te
path. Hence the apparent position of stars keeps on changing and the amount of light that
enters our eyes also fluctuates. This is perceived as the “Twinkling of stars”.
hi
Question 17.Why don’t planets tinkle the same way stars do?
ba
Ta
@
Because of atmospheric refraction sun is visible about 2 minutes earlier than actual
sunrise and about 2 minutes after the actual sunset.
am
gr
le
Te
on
5. Scattering of Light
es
(Refer to video: Scattering of Light)
hi
a. Rayleigh scattering
nt
When light passes through particles of a medium e.g. our atmosphere, the particles of the
medium scatter the light in different directions. This is known as scattering of light.
Te
hi
ba
Ta
@
Selective scattering (or Rayleigh scattering) occurs when certain particles are more effective
at scattering a particular wavelength of light. Air molecules, like oxygen and nitrogen for
example, are small in size and thus more effective at scattering shorter wavelengths of light
(blue and violet).
am
gr
le
Te
on
es
hi
nt
orange or red. However, the Sun is actually all colors mixed together,
which in turn appear white to our eyes. This can be seen in pictures of
the Sun taken from space.
Ta
@
Now that you understand the phenomenon, answer the following questions.
Question 20.Is the sky above us blue or does it just appear blue? Is there even a sky? Explain in brief.
am
gr
Question 21.What will be color of the sky in the absence of atmosphere, like on the moon?
le
Te
on
es
Question 22.Why do clouds appear white or greyish in color? Why not any other particular color?
hi
nt
Te
hi
ba
Question 23.Why danger signals and stop lights are usually red in color?
Ta
@
Question 24.Why does the Sun appear almost white at the noon but red at the time of sunset and
sunrise?
am
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
am
gr
le
3) Write the functions of following parts of human eye:
i. Iris ii. Vitreous humor iii. Cornea iv. Retina
Te
4) What do you mean by power of accommodation of eye? Do all animal’s eyes have that
property or only humans? How our eyes achieve that?
5) What advantages do we have because of two eyes, instead of a single one?
on
6) What is meant by myopia? What are its causes? How to correct it?
7) Draw diagrams showing both hypermetropia and its correction.
8) What is the cause of presbyopia? Draw diagram of the lens that can be used to correct it.
9) What is dispersion of light? Draw a diagram showing this phenomenon.
es
10) Is the refractive index of glass same for all the components of white light? Explain your
answer.
hi
15) A person needs a lens of -5.5 D power in order to correct his distant vision. For near vision
however, he needs a lens of +1.5 D. What is the focal length of the lens required for
ba
correcting-
i. Distant vision
Ta
B) Lens itself
C) Ciliary Muscle
D) Retinal adjustment
17) How does our brain interpret the image that is being formed on the retina?
A) Wherever light falls that area becomes hot and thus by measuring the difference in
hotness, image is formed.
am
C) + 4 D
D) – 4 D
19) The far point of a myopic eye is 80 cm. What is the power of lens that he should be
gr
prescribed?
A) + 1.25 D
le
B) – 1.25 D
C) + 0.80 D
Te
D) – 0.80 D
20) Choose the correct option:
Statement 1: On a hot day a highway appears wet sometimes, this phenomenon happens
because of refraction.
on
Statement 2: On a hot day the air above the road in contact with the road is hot, so less dense
and has less refractive index than the cool air above it so when light comes through denser
medium to rarer medium its totally internally reflected and hence the road appears shiny or
es
wet.
A) Statements 1 and 2 are correct but statement 2 is not the reason of statement 1.
hi
B) Statements 1 and 2 are correct and statement 2 is the correct reason for statement 1.
C) Both statements are incorrect.
nt
SOLUTION
15)
hi
i. Distant vision
Power of lens required for correction of distant vision = -5.5 D
ba
P = 1/f
So, f = 1/-5.5 = -0.19 m
Ta
20) B
am
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer to video: Introduction)
a. Natural Resource
am
First of all we need to understand what a resource is. Everything available in our
environment, which can be used to satisfy our needs can be termed as a ‘resource’,
gr
provided, it is technologically accessible, economically feasible and culturally acceptable.
le
Question 1.What is a natural resource? Give some examples.
Te
on
es
hi
nt
These natural resources are vital for human survival as well as for maintaining the quality
Te
of life. For years we have taken them for granted and exploited them indiscriminately
which has led to various issues like depletion and degradation of these resources,
hi
accumulation of resources in few hands etc. Indiscriminate exploitation has also led to
global ecological crises such as, global warming, ozone layer depletion, environmental
ba
The quality of water of river Ganga, which runs its course from Gangotri in the
@
Himalayas to Ganga Sagar in the Bay of Bengal, has degraded because of a number of
reasons. The presence of coliform bacteria in water indicates contamination by disease-
causing microorganisms.
Question 2.What are some of the factors, which have led to the pollution of river Ganga and other
water bodies?
am
gr
le
Te
A number of initiatives have been undertaken to clean the river. The Ganga Action Plan
was launched with this motive in 1985 by the then Prime Minister Rajiv Gandhi.
on
There are some measurable factors, which are used to quantify pollution or the quality of
the water that we use for various activities. One of them is pH, which can be easily
checked using universal indicator.
es
It’s high time that we learn to incorporate the three R’s of the environment in our daily
nt
Question 3. What do they mean? List some of the ways to implement the 3 R’s in everyday life.
Reduce:
hi
1)
2)
ba
Ta
Reuse:
1)
2)
@
Recycle:
1)
2)
Question 4.Out of ‘Recycle’ and ‘Reuse’, which is better? Support your answer with valid reason.
am
gr
le
Another major issue concerning us is CO2 emission. There are various local and
international emission standards for this, which set quantitative limits on the permissible
Te
amount of CO2 that may be released from specific sources over specific timeframes. They
are generally designed to achieve air quality standards and to protect human health.
on
Did You Know?
China and the USA are the largest emitters of CO2. In 2007 they
emitted 6.538 and 5.838 billion tones respectively, over 42% of global
es
emissions.
hi
nt
Almost everything that we use or consume comes from resources on the earth. Even energy
from the sun is processed by living organisms and various physical and chemical processes on
hi
The management of natural resources requires a long-term perspective so that these will last
for the generations to come and will not merely be exploited to the hilt for short term gains.
The concept of sustainable development encourages forms of growth that meet
current basic human needs, while preserving the resources for the needs of future
generations.
Question 6. What would be the advantages and disadvantages of exploiting resources with short-term
aims?
am
gr
le
Te
3. Forests and Wildlife
on
(Refer to video: Forests and Wildlife)
es
Question 8. With respect to forests, stakeholders are those who can affect or get affected by the
forests.
What are the four types of stakeholders? How do they interact with the forests?
am
gr
le
Te
on
Question 9. What is monoculture? How is it harmful?
es
hi
nt
Te
hi
ba
Ta
More species of plant and animal live in the rainforest than any other land
habitat. The Indonesian rainforest alone is home to one fifth of all plant and
animal life yet it is disappearing at a faster rate than at any other time.
b. Human Intervention
Human beings are very much a part of forests. There have been many instances of local
people working traditionally for conservation of forests. For instance, the ‘Amrita Devi
Bishnoi National Award for Wildlife Conservation’ is given in the memory of Amrita
Devi Bishnoi, who in 1731 sacrificed her life along with 363 others for the protection of
am
‘khejri’ trees in Khejrali village near Jodhpur in Rajasthan.
Question 10. When the great Himalayan National Park was formed, the practice of grazing by herds
gr
came to an end. What negative impact did it have?
le
Te
on
es
hi
nt
The Chipko Andolan (‘Hug the Trees Movement’) was the result of a grass root level
Te
effort to end the alienation of people from their forests. The movement originated from
an incident in a remote village called Reni in Garhwal during the early 1970s. There was
a dispute between the local villagers and a logging contractor who had been allowed to
hi
fell trees in a forest close to the village. On a particular day, the contractor’s workers
appeared in the forest to cut the trees. The women of the village reached the forest
ba
quickly and clasped the tree trunks thus preventing the workers from felling the trees.
Thus thwarted, the contractor had to withdraw. The Chipko movement quickly spread
Ta
across communities and media, and forced the government, to whom the forest belongs,
to rethink their priorities in the use of forest produce.
@
The damage caused to the forests and wildlife has been immense. It has been because of a
number of reasons:
Industry needs
Developmental needs
Tourist convenience
am
gr
le
Te
Question 12. Suggest some approaches that can help conserve forests and wildlife.
on
es
hi
nt
Te
a. Water Resources
Water is one of the most important natural resources. It is the basic necessity of all forms
Ta
of life present on the Earth. However, human intervention changes the quality and
availability of water in various regions. The presence and absence of water affects the
socio-economic conditions of that area.
@
Rains in India are largely due to the monsoons. This means that most of the rain falls in a
few months of the year. Water can be present in different forms in nature as rainfall,
surface runoff, ground water, rivers, seas etc.
Question 13.Despite nature’s monsoon bounty, what are the reasons that have led to depletion of
ground water?
am
gr
le
Te
Irrigation methods like dams, tanks and canals have been used in various parts of India
since ancient times. These were managed by local people and assured that the basic
on
minimum requirements for both agriculture and daily needs were met throughout the
year. The use of this stored water was strictly regulated and the optimum cropping
patterns based on the water availability were arrived at on the basis of experience. The
es
locals also maintained these irrigation systems. We can say that these irrigation systems
were locale specific.
hi
Question 14. Which irrigation technique was traditionally used in Himachal Pradesh? Explain how it
nt
worked.
Te
hi
ba
Ta
@
b. Dams
These traditional systems changed with the arrival of British. The conception of large
scale projects – large dams and canals traversing large distances came into being and
were largely implemented.
am
Question 15. What are the two purposes served by dams?
gr
le
Te
on
The Indira Gandhi Canal has brought greenery to considerable areas of Rajasthan. But the
mismanagement of the water has largely led to the benefits being cornered by a few
es
people. There is no equitable distribution of water, thus people close to the source grow
water intensive crops like sugarcane and rice while people farther downstream do not get
hi
any water. This has led to the discontentment among the people who have been displaced
by the building of the dam and its canal network. The construction of large dams has
nt
The three types of problems that arise due to construction of dams are:
Social problems
Economic problems
hi
Environmental problems
ba
Many dam failures have occurred in the past, these disasters can cause
significant damage and threaten lives. In 1889 a failure of the South Fork
Dam near Johnstown, Pennsylvania, USA, killed over 2200 people.
am
gr
c. Water Harvesting and Watershed Management
le
produce secondary resources of plants and animals for use in a manner which will not
Te
cause ecological imbalance.
Question 18. Write the water harvesting techniques practiced in the following states:
ba
Rajasthan
Ta
Maharashtra
@
MP and UP
Bihar
Himachal Pradesh
Jammu
Tamil Nadu
am
Kerala
gr
Karnataka
le
The system adopted for rainwater harvesting is highly locale specific and the benefits are
Te
also localized. In largely level terrain, the water harvesting structures are mainly crescent
shaped earthen embankments or low check dams. Monsoon rains fill ponds behind the
structures. Their main purpose is not to hold surface water but to recharge the ground
water beneath.
on
es
hi
nt
Te
hi
Question 19. What are the advantages of ground water as compared to surface water?
Ta
@
Coal and petroleum are the most common fossil fuels, which are widely used. These are
important source of energy for us. The demand for these resources has increased
tremendously over the years.
am
Question 20. Why is the management techniques used for coal and petroleum slightly different as
compared to other resources?
gr
le
Te
on
es
hi
nt
Coal and petroleum have been formed from biomass. They contain carbon, hydrogen,
Te
nitrogen and sulphur. When these are burnt, the products are carbon dioxide, water,
oxides of nitrogen and oxides of sulphur. The oxides of sulphur and nitrogen and carbon
monoxide are poisonous at high concentrations and carbon dioxide is a greenhouse gas.
hi
Question 21. What happens when these fossil fuels are burnt in insufficient supply of oxygen?
ba
Ta
@
Fossil fuels include coal, natural gas and oil. The current statistics show
that globally, fossil fuels provide for over 85% of all the energy we
consume.
am
gr
le
Te
on
es
hi
nt
Question 22.Suggest which of these will you prefer so as to make a little contribution towards
management of natural resources.
hi
walking/cycling
Ta
1) What would be the advantage and disadvantage of exploiting resources with short-term aims
2) Why should we conserve forests and wildlife?
3) List some of the ways by which we can quantify pollution or the quality of water.
4) Over the years, Ganga river has been polluted badly. What factors have led to this pollution?
5) What do you mean by sustainable development? How does it help in management of natural
am
resources?
6) What are the 3 R’s to save the environment? Explain each of them in details.
7) Why do we need to manage our natural resources? Give three reasons supporting your
gr
answer.
8) Why are forests known as biodiversity hot spots?
le
9) Who are the stake holders when we consider the conservation of forests? How do they affect
forests?
Te
10) Human intervention has been very much a part of the forest landscape. What has to be
managed is the nature and extent of this intervention. How much do you agree with this
statement? Justify your answer.
11) Give an example of people’s participation in management of forests where it has helped to
save forest resources.
on
12) The construction of large dams is generally opposed. What are the problems caused because
of them?
es
13) What do you mean by watershed management? How does it help? Give some examples of
water harvesting techniques that have been used in India.
hi
energy.
16) Ganga Action Plan was launched in the year
Te
A) 1973
B) 1975
C) 1985
hi
D) 1988
17) Why do we need management of natural resource?
ba
C) Since the human population is exponentially increasing and resources are limited
D) All of these
18) A blue litmus paper turns red when dipped in tap water. What can you conclude about the
@
nature of water?
A) Acidic
B) Basic
C) Neutral
D) Can’t say
am
as compared to other resources.
Statement II: Burning of fuels in insufficient amount of air can increase efficiency and also
reduce air pollution.
gr
A) Statement I is correct; Statement II is incorrect.
B) Statement I is incorrect; Statement II is correct.
le
C) Both statements are correct.
D) Both statements are incorrect.
Te
SOLUTION
16. C on
17. D
18. A
19. B
es
20. D
hi
nt
Te
hi
ba
Ta
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
am
(Refer to video clip - Origin of Life)
Question 1. Why is carbon considered to play a highly significant role in our everyday life ?
gr
le
Te
on
es
2. Bonding in Carbon
hi
Carbon has six electrons. And this is what makes it so special. The two innermost are tightly
nt
bound to the nucleus. And the remaining four are in the outer shell which in accordance with
the laws of nature should have eight electrons.
Te
Every atom of an element in this universe is in search of stability. The state of least energy.
Since carbon has four electrons in the valence shell, it needs four more to attain an octet. This
is the maximum number of bond any atom can make and carbon being a non-metal forms
hi
covalent bonds.
ba
Covalent bond is sharing of electron pair between the atom. This type of bonding occurs
between two non-metals that have similar electronegativity. Neither of the atoms is strong
enough to attract electrons from other. Hence, for stabilization, they share their electrons from
@
Carbon occurs in different forms in nature which also forms the basic building block and vital
component for earth on life.
am
Question 3. Name the allotropic forms of carbon.
gr
le
Te
on
Question 4. Why does graphite conduct electricity while diamond on the other hand does not?
es
hi
nt
Te
hi
ba
am
organic compounds are: Catenation & Tetravalency
The property of carbon element due to which it can form bonds with other carbon atoms to
form long carbon chains is called catenation.
gr
Question 5. What do you understand by tetravalency of carbon?
le
Te
on
es
hi
Carbon being tetravalent, can form three types of bonds to satisfy its valency. On the types of
bond the carbon makes in the compounds they are classified as saturated & unsaturated.
hi
a. Saturated compounds
Ethane
am
gr
le
Te
b. Unsaturated Compounds
Carbon forms multiple bonds with itself and other compounds. If carbon skeleton has four carbon
atoms, we can arrange it in two different skeletons which are possible.
am
The compounds with same molecular formula but different in their structural arrangement called
isomers.
gr
Question 8. What is organic chemistry?
le
Te
on
5. Functional Group and Nomenclature
es
(Refer to video - Functional Group and Nomenclature)
Many hundreds of new carbon compounds are added every day. These compounds cannot be
hi
memorized, there are certain rules set by International Union of Pure and Applied Science
(IUPAC) in order to identify the name of a certain compound removing any scope of
nt
Question 9. What are the important points that have to be considered in order to name a given carbon
hi
compound?
ba
Ta
@
Question 10. Find the name with reference to IUPAC of the given carbon compound.
am
gr
a. Nomenclature of Functional Groups
Question 11. What is a functional group? How is it different from a substituent group?
le
Te
on
es
hi
nt
Question 12. Write down the detailed procedure for naming the compound(IUPAC) depicted in the
Te
image below.
hi
ba
Ta
@
am
gr
le
Te
on
es
hi
nt
Cochineal is an acid-base indicator made from the bodies of dried female cochineal
insects, found in Mexico and Central America. You'll have to grind about 70,000
insects to make one pound of dry indicator. The powder is about 10% carminic acid,
Ta
Carbon compounds are considered as the main source of fuels that we use for our daily needs
because all the carbon fuels on combustion produce carbon dioxide with a significant amount
of energy and an availability (of fuel) which till date has no substitute.
am
Question 13. What do you understand by the term combustion?
gr
le
Te
What is incomplete combustion?
on
When carbon burns in limited supply of air evolving CO (carbon monoxide) in the process, it is
known as incomplete combustion.
es
Question 14. What are the types of flames you observe when saturated & unsaturated compounds are
burnt?
hi
nt
Te
hi
ba
a. Oxidation
A reaction which involves the addition of oxygen & removal of hydrogen is called as oxidation.
Ta
Question 15. What are oxidizing agents? What happens to an oxidizing agent in a reaction
b. Addition Reaction
Addition reaction can also be referred to as reduction reaction when the reaction proceeds
with addition of hydrogen and removal of oxygen. This reaction is used in the conversion
of an unsaturated hydrocarbon to a saturated hydrocarbon.
am
Question 16. Explain an addition reaction with the help of a suitable example.
gr
le
Te
on
c. Substitution Reaction
es
In presence of light.
hi
nt
Te
Carbon is the fourth most abundant element which has several categories of compounds & has
numerous importance commercially as well as in domestic use.
Properties of Ethanol -
Ethanol belongs to the family of alcohol.
Ethanol is liquid at room temperature.
am
Ethanol is water soluble
Reactions of ethanol:
gr
Reaction with sodium:
le
Te
on
Question 18. How would you prove that sulphuric acid acts as dehydrating agent?
es
hi
nt
Te
hi
b. Ethanoic Acid
ba
am
gr
le
Te
5. Soap & Detergents
am
6. How do you convert alcohols to respective alkenes?
7. What are esters?
8. Name the reaction used in manufacture of soap.
gr
9. Why does carbon show a high tendency towards catenation?
10. Write the structural formula of 3-Chlorohexanol.
le
11. Give the IUPAC of the following compound
Te
on
12. Why does graphite conduct electricity whereas diamond does not? Explain the effect of the
structure and bonding.
13. What is the polymer manufactured using alkenes? Name the polymer.
es
(c) alkynes > alkenes > alkanes (d) alkene > alkynes > alkane
15. Carbon forms a cyclic compound known as-
nt
16. Explain covalent bonding and polar covalent bonds with an example.
17. Why do carbon compounds have low melting & boiling point.
18. What do you mean by functional group? Draw the skeletal structure of 2-methyl hexane-2-ene
hi
19. Briefly explain the mechanism involved in the cleaning action of soap.
20. Write the reaction to show the oxidation of alkanes.
ba
SOLUTION
Ta
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer to video clip – Introduction)
Whenever humans have been provided with a heap of random entities, we have always shown
am
a strong tendency towards organizing the entities into neat defined groups. Grouping of any
number of entities always requires a certain common factor or feature of the concerned
entities. It can be colour, size, weight, material, power, money etc.
gr
Organization - the act or process of putting the different parts of something in a certain order
le
so that they can be found or used easily or even ease the study of a number of different basic
particles.
Te
Question 1. What do you understand by the term “Elements”?
on
es
hi
nt
Copper, Tin, Silver, Gold, Sulphur, Gold were among the first
Te
Question 2.What are alkali metals? Why are they called so?
@
am
2. Early Models of the Periodic Table
gr
(Refer to video clip – Early Models of Periodic Table)
le
By the middle of the last century chemists generally understood that chemical elements can
Te
be grouped together in separate classes according to obvious similarities or dissimilarities in
their properties. Thus, flammable alkali metals (that form stable cations) can be naturally
separated from poisonous halogens (that prefer to form anions). It had also been demonstrated
on
by Doebereiner that some elements may be grouped into triads so that the middle element's
properties can be approximated as the average of the properties of its neighbours. In the
1850s-1890s several workers combined the principle of triads and chemical similarity and
es
used the atomic weights (really masses) of the elements to formulate the periodic law.
hi
Question 4. Show the bonding between the constituent atoms of carbon tetrachloride (CCl4).
nt
Te
hi
ba
a. Dobereiner’s Triads
(Refer to video clip – Early Models of Periodic Table – Table of Triads)
Ta
As the number of elements increased, chemists inevitably began to find patterns in their
properties. In 1829 Johann Wolfgang Dobereiner discovered the existence of families of
@
elements with similar chemical properties. There always seemed to be three elements in these
families, he called them triads.
Dobereiner also found patterns in the physical properties of the elements in a triad. He noted, for
example, that the atomic weight of the middle element in each triad is about equal to the average
of the atomic weights of the first and third elements.
am
gr
Did you know?
le
considered to be a million times stronger than concentrated sulphuric
acid.
Te
b. Newland’s Octaves
on
(Refer to video – Early Models of Periodic Table – 56 Elements of Periodic Table)
es
By the mid-19th century, the atomic masses of many of the elements had been
determined. The English chemist John Newlands (1838–1898), hypothesizing that the
hi
chemistry of the elements might be related to their masses, arranged the known elements
in order of increasing atomic mass and discovered that every eighth element had similar
nt
properties (the noble gases were still unknown). Newlands therefore suggested that the
elements could be classified into octaves. A group of seven elements, corresponding to
Te
the horizontal rows in the main group elements (not counting the noble gases, which were
unknown at the time).
hi
The next milestone in the development of the periodic table was set by the Russian chemist
Dmitri Mendeleev, who is generally acknowledged as the “father” of the modern periodic table.
Mendeleev wrote out the names of the elements, along with their atomic weights and other
properties, on cards, which he then laid out in rows and columns much like a game of solitaire.
When the elements were ordered according to atomic weight, Mendeleev, like Dobereiner and
am
Newlands, could see that certain chemical properties were repeated periodically; however, not all
the elements fit this pattern neatly. Mendeleev's solution was to move certain elements to new
positions, despite their accepted weight, in order to group them with other elements sharing
gr
similar properties.
le
Te
on
es
hi
nt
Te
The groups in Mendeleev's table are determined by how many oxygen or hydrogen atoms are
needed to form compounds with each element. For example, in Group I, two atoms of hydrogen,
ba
lithium, Li, sodium, Na, and potassium form compounds with one atom of oxygen. In Group VII,
one atom of fluorine, F, chlorine, Cl, and bromine, Br, react with one atom of hydrogen. Notice how
Ta
The position of hydrogen was not correctly defined. It was placed in group I although it resembles
the properties of both the group I elements - the alkali metals and the group VII elements-the
halogens.
am
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Henry Moseley, an English physicist discovered in the year 1913 that atomic number, is the most
fundamental property of an element and not its atomic mass. Atomic number (Z), of an element is
the number of protons in the nucleus of its atom. The number of electrons in the neutral atom is
also equal to its atomic number.
am
Question 9. Write down the modern periodic law.
gr
le
Te
on
Main features of modern periodic table
es
Groups - There are 18 vertical columns in the periodic table. Each column is called a
hi
group. Elements which are in the same group have similar chemical properties.
nt
The groups have been numbered from 1 to 18 from left to right. Group 1 on extreme left
position contains alkali metals (Li, Na, K, Rb, Cs and Fr). Group 18 on extreme right
Te
side of the periodic table contains noble gases. Their outermost shells contain 8 electrons
except He as its outermost shell is K shell and it can hold only a maximum of 2 electrons.
hi
All Elements in a group have similar chemical and physical properties because they have
the same number of outer electrons.
ba
Periods - There are seven(7) periods in periodic table. In periodic table horizontal rows
are used to represent periods. In a period the number of valence electrons and the
Ta
nuclear charge increases from left to right. It increases the force of attraction between
them.
@
Question 10. Write down the merits of Modern Periodic Table over Mendeleev’s Periodic Table.
am
gr
le
Te
on
es
hi
The Alkali metals are comprised of group 1 of the periodic table and consist of Lithium,
Sodium, Rubidium, Cæsium, and Francium. These metals are highly reactive and form
Te
ionic compounds (when a non-metal and a metal come together) as well as many other
compounds. Alkali metals have the largest atom sizes than any of the other elements on
each of their respective periods.
hi
Alkali Earth Metals are located in group 2 and consist of Beryllium, Magnesium,
ba
Calcium, Strontium, Barium, and Radium. Unlike the Alkali metals, the earth metals have
a smaller atom size and are not as reactive. These metals may also form ionic and other
compounds and have a charge of +2.
Ta
@
Question 11. Why do alkali metals and alkali earth metals show high degrees of reactivity.
am
gr
b. Transition Metals
The transition metals range from groups IIIB to XIIB on the periodic table. These metals
le
form positively charged ions, are very hard, and have very high melting and boiling
points. Transition metals are also good conductors of electricity and are malleable.
Te
c. Lanthanides and Actinides
on
Lanthanides and Actinides, form the block of two rows that are placed at the bottom of
the periodic table for space issues. These are also considered to be transition metals.
Lanthanides form the top row of this block and are very soft metals with high boiling and
es
melting points. Actinides form the bottom row and are radioactive. They also form
compounds with most non-metals.
hi
d. Metalloids
nt
Question 12. What are metalloids? How do they compare to the properties of metals and non-metals.
Te
hi
ba
Ta
one of the halogens are salts. The physical properties of halogens vary significantly as
they can exist as solids, liquids, and gases at room temperature. However in
general, halogens are very reactive, especially with the alkali metals and earth metals of
groups 1 and 2 with which they form ionic compounds.
Question 13. Why do halogens show a high tendency to make compounds with alkali metals and
alkali earth metals.
am
gr
le
Te
f. Noble Gases
on
The noble gases consist of group 18 (sometimes referred to as group O) of the periodic
table of elements. The noble gases have very low boiling and melting points and are all
gases at room temperature. They are also very non-reactive as they already have a full
es
valence shell with 8 electrons. Therefore, the noble gases have little tendency to lose or
gain electrons.
hi
Question 14.What is the common oxidation state of all the elements of alkali metals, halogens and
nt
Te
hi
ba
Ta
a. Atomic Radius
We can never determine the atomic radius of an atom because there is never 100% probability
of finding an electron, and thus never a distinct boundary to the atom. All that we can
measure is the distance between two nuclei (inter-nuclear distance). A covalent
radius is one-half the distance between the nuclei of two identical atoms. An ionic radius
is one-half the distance between the nuclei of two ions in an ionic bond. A metallic radius
is one-half the distance between the nuclei of two adjacent atoms in a crystalline
structure.
am
gr
le
Te
on
es
hi
Question 15. What is the trend in the change of atomic radii as one moves across the periods and
down the group in the Modern Periodic Table.\
nt
Te
hi
ba
Ta
@
Expelling an electron from an atom requires enough energy to overcome the electrostatic
pull by the positive charge of the nucleus.
Question 16. What do you understand by ionization energy? How does it vary across the periodic
table.
am
gr
le
Te
The highest ionization energies are the noble gases because they all have high
effective charge due to their octet formation and require a high amount of energy
to change that stable configuration. on
c. Electron Affinity
Electron affinity (E.A) is the energy change that occurs when an electron is added to a
es
gaseous atom. Electron affinity can further be defined as the enthalpy change that results
from the addition of an electron to a gaseous atom. It can be either positive or negative
hi
value. The greater the negative value, the more stable the anion is.
(Exothermic) The electron affinity is positive
nt
X(g) + e− + Energy X−
hi
It is more difficult to come up with trends that describe the electron affinity. Generally,
the elements on the right side of the periodic table will have large negative electron
ba
affinity. The electron affinities will become less negative as you go from the top to the
bottom of the periodic table. However, Nitrogen, Oxygen, and Fluorine do not follow this
trend.
Ta
Question 17. Why do elements on the right hand side of the periodic table have high (negative)
electron affinities.
@
d. Electronegativity
am
bond. Electronegativity will be important
when we later determine polar and
nonpolar molecules. Electronegativity is
gr
related with ionization energy and electron
affinity. Electrons with low ionization energies have low electronegativities because their
nuclei do not exert a strong attractive force on electrons. Elements with high ionization
le
energies have high electronegativities due to the strong pull exerted by the positive
Te
nucleus on the negative electrons. Therefore the electronegativity increases from bottom
to top and from left to right.
Question 18.Identify the most electronegative and the most electropositive elements in the modern
on
periodic table respectively.
es
hi
nt
Te
e. Metallic Character
hi
The metallic character is used to define the chemical properties that is present in metallic
ba
elements. Generally, metals tend to lose electrons to form cations. Non-metals tend to
gain electrons to form anions. They also have a high oxidation potential therefore they are
easily oxidized and are strong reducing agents. Metals also form basic oxides; the more
Ta
1. Predicting atomic size and radial distribution of electrons in neutral atoms and ions
2. Measuring and comparing ionization energies
3. Comparing electron affinities and electronegativities
4. Predicting redox potential
5. Comparing metallic character with other elements; it’s ability to form cations
am
6. Predicting what reaction may or may not occur due to the trends
7. Determining greater cell potential (sum of oxidation and reduction potential) between
reactions
8. Completing chemical reactions according to trends
gr
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
1. Why is the position of hydrogen not decided in the modern periodic table?
2. The bond formed between the metals & non-metals is also known as –
(a) ionic bond (b) covalent bond
(c) electrocovalent bond (d) polar covalent bond
3. Why are lanthanides & actinides kept separately in periodic table?
am
4. Name the most electronegative element in periodic table and justify.
5. Write the name of a few commonly used metalloids and state their uses.
6. Why are d-block elements also known as transition elements?
gr
7. Why are the alkali metals highly reactive?
8. What are Dobereiner triads?
le
9. What are the limitations of Mendeleev’s periodic table?
10. Determine the period number & group number of element iodine which has an atomic number
Te
of 53?
11. Which of the following ions is largest?
(a) Na+ (b) K+ on
2+
(c) Mg (d) Ca2+
12. Which of the following elements are likely to form an ion which carries a charge of -2?
(a) Ca (b) Fe
es
(c) C (d) S
13. Which of the following elements will have the lowest ionization energy?
hi
14. How many metalloids are there in the modern periodic table? How are they different from
metals?
15. Which element in group 15 has the strongest metallic character?
Te
(c) outer shell is completely filled (d) outer shell electron is half filled.
17. Why does phosphorous have a high first ionization energy?
ba
18. When metallic atoms combine with non-metallic atoms, which one of them loses electron(s)
& which one gains the electron(s)?
19. Which metal is obtained commercially by electrolysis of common salt?
Ta
20. Why are most compounds formed by the d-block elements coloured?
SOLUTION
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
The term environment has been derived from a French word “Environia”. It is the complex of
physical, chemical and biotic factors (as climate, soil and living things) that act upon an
am
organism or an ecological community and ultimately determine its form and survival.
gr
2. Ecosystem
(Refer video: Ecosystem_ Ecosystem - I)
le
Te
Question 1. Define ecosystem.
on
es
hi
nt
includes the living organisms and _____________________ component which includes the
physical factors like temperature, rainfall, wind, soil and minerals.
hi
We obtain energy from the food that we eat. This is used for the various functions of the
ba
body. Energy flows in the ecosystem by the process of eating and being eaten. The sequence
of who eats whom in a biological community (an ecosystem) to obtain nutrition is called
_________________________. When this chain is interconnected, it becomes a food web.
Ta
Question 3. How much energy from the sun is used by the plants?
am
Plants use the energy from the sun to prepare food by a process called photosynthesis. Photosynthesis
gr
converts ____________ energy to ____________________ energy.
le
According to second law of thermodynamics, energy conversions are never 100% efficient.
Te
Question 4. What is ecological efficiency?
on
es
hi
The total efficiency at any level of consumption is the product of efficiencies of all the converters up
nt
to that level.
Te
The feeding positions in a food chain or web are called tropic levels. These levels are represented in
hi
Tertiary Consumers
Ta
Secondary Consumers
@
Primary Consumers
Primary Producers
am
gr
le
(Refer video: Ecosystem_ Ecosystem - III)
Te
The place or function of a given organism within its ecosystem is its niche.
Tertiary consumers can be decomposers or predators. Predators are organisms that prey upon other
organisms.
on
Question 6. What are the limiting factors for predators?
es
hi
nt
Te
hi
ba
3. Early Age
(Refer video: Early Age)
@
Our ancestors were hunter gatherers. They lived in small groups, did not have homes and
practiced methods to control population. They discovered a form of energy known as
____________________ which helped them in surviving in any weather condition. This
resulted in an increase in population. With time and knowledge of technology, they developed
tools for hunting and became super predators. They drastically reduced the prey population
and caused extinction of many species which caused a shortage of food. This is when
agriculture started.
Agriculture or farming means radical simplification and reorganization of the flow of energy.
In this, the farmers occupied a piece of land and obtained crops for their consumption out of
that land. Population again increased exponentially and people started social organization.
am
gr
le
Te
They also started domesticating animals to meet their food requirements. Farming is
on
extractive because
____________________________________________________________________.
es
Farmers gradually found ways of replenishing the lost nutrients. Some of these methods
include usage of manure, planting leguminous crops etc. Soil erosion also results in the loss of
hi
the nutrient rich top soil. Trees bind the soil and help in solving this problem.
5. Commercial Hunting
nt
Around 1.5 million species have been identified on earth till date. There are many more but
still unidentified. The tropic region of earth has a large variety of flora and fauna. Madagascar
hi
provides shelter to around 10% of all known species. Many species of animals and plants
have become extinct due to human invasion in these lands.
ba
Question 8. Give examples of a few animals that became extinct due to human activities.
Ta
@
am
gr
le
Te
(Refer video: Commercial Hunting_ Commercial Hunting - II)
6. Industrial Revolution
(Refer video: Industrial Revolution)
on
People of ancient and medieval times had to spend long, tedious hours of hand labor even on
es
simple objects. The energy or power, they employed in work came almost wholly from their
own and animals' muscles. The Industrial Revolution is the name given to the movement in
hi
which machines changed people's way of life as well as their methods of manufacture. Steam
engine was invented which converted ____________________ into mechanical work.
nt
Similarly other forms of energy were converted from one form to another to produce work.
Coal was also discovered during this time.
Te
7. Pollution
hi
Pollution is the introduction of contaminants into the natural environment that causes adverse
change.
Ta
a. Air Pollution
@
Nitrogen oxides, Sulphur dioxide, carbon monoxide are the major gases that cause air
pollution.
am
gr
le
Te
Smog is a kind of air pollution, originally named for the mixture of smoke and fog in the air.
on
es
hi
nt
Te
hi
Figure 2: Smog
ba
Breathing the air in Mumbai for one whole day is equivalent to smoking 100 cigarettes.
@
am
gr
Acid rain is a rain that has been made acidic by pollutants in the air as a result of fossil fuel and
le
industrial combustions that mostly emits Nitrogen Oxides (NOX) and Sulfur Dioxide (SO2). It
releases metal ions in soil and causes leaching of elements like aluminum, cadmium, mercury into
Te
aquifers.
A layer of ozone is present in the layer of stratosphere of the atmosphere. This layer protects life on
earth from the harmful ultraviolet radiations of the sun.on
__________________________________________ are nontoxic, nonflammable chemicals
containing atoms of carbon, chlorine, and fluorine. They are used in the manufacture of aerosol
sprays, blowing agents for foams and packing materials, as solvents and as refrigerants. CFCs are a
es
major source of inorganic chlorine in the stratosphere following their photolytic decomposition by
UV radiation. In addition, some of the released chlorine would become active in destroying ozone in
hi
am
(Refer video: Pollution_ Pollution - II)
gr
Global Warming is the increase of Earth's average surface temperature due to effect of greenhouse
le
gases, such as carbon dioxide and methane.
Te
on
es
hi
nt
Te
am
a) Primary consumer
b) Producer
c) Decomposer
gr
d) Sunlight
3. Which of the following word is related to Homo Sapiens?
le
a) Herbivore
b) Carnivore
Te
c) Autotroph
d) Omnivore
4. Protective layer of ozone in the atmosphere exists in which layer?
on
a) Troposphere
b) Ionosphere
c) Stratosphere
es
d) Atmosphere
5. Disposable plastic plates should not be used because
hi
8. How will invasion by an alien species reduce the species diversity of an area?
9. What are e-wastes?
10. Compare the grazing and the detritus food chain.
Ta
SOLUTION
am
1. (b) Detrimental conditions
2. (b) Producer
gr
3. (d) Omnivore
4. (c) Stratosphere
5. (d) they are made of non-biodegradable materials
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer video: Introduction)
Reproduction is the process in which new organisms are produced from their parents. It is
am
essential for the survival of species. All living things ensure that they pass down their genes
through reproduction.
gr
Question 1. How is sexual reproduction advantageous over asexual reproduction?
le
Te
on
Types of reproduction
es
hi
nt
Te
hi
ba
Ta
2. Fission
@
It is a type of asexual reproduction in which reproduction occurs by splitting the body into
parts. Fission is of two types- Binary and Multiple. Binary fission results in formation of
______________cells from a single parent while multiple fission results in formation of
________________ cells. Fission requires replication and division of genetic material. Most
bacteria and protozoa divide along a specific plane during division. For amoeba, this can
occur along any plane. Multiple fission usually occurs during ______________________
conditions producing many daughter cells within a protective covering called cyst. When
conditions become more_________________, the cyst breaks and daughter cells are
liberated.
Question 2. Identify whether binary fission occurs on a single plane or along any plane in the
organisms shown below?
am
gr
le
Te
on
Question 3. If an amoeba undergoes reproduction after every 3 months, how many amoebas will be
formed after 12 months of this cycle? How?
es
hi
nt
Te
3. Fragmentation
(Refer video: Fragmentation)
ba
Regeneration is the process in which a part of an organism can completely generate an entire
individual or some parts of its body. Regeneration is used as a mode of reproduction only by
simple organisms with less complexity of organization. Starfish, lizards, planaria and hydra
all exhibit some form of regeneration. More complex organisms only have limited
regeneration capacity.
am
Question 4. How is regeneration different from fragmentation?
gr
le
Te
on
When organisms are born they start with a single cell. This cell can grow into any cell in the
es
body. Such cells are called________________________. The process in which stem cells
become specialized cells is called _______________________.
hi
nt
4. Budding
Te
Budding generally results in offspring that is smaller than its parent. Budding is possible in
hi
both unicellular and multi-cellular organisms. A new offspring results when a bud breaks
away from its parent.
ba
Ta
@
Parent hydra Hydra with bud Bud grows into a new hydra New hydra detaches
am
gr
le
Te
Question 6. Draw a neat labeled diagram to show budding in yeast.
on
es
hi
nt
Te
5. Spore Formation
hi
Spore formation occurs in simple multicellular organisms. In algae, the protoplast divides to form
small motile spores known as ___________________. These spores when released in the surrounding
Ta
am
gr
Figure 3: Rhizopus
le
Te
on
Question 8. Why are spores covered in a protective layer?
es
hi
nt
Te
hi
ba
6. Vegetative Propagation
Ta
a. Natural Methods
This occurs naturally in which new plant comes from roots, stems or leaves of the existing
plant for example buds on root of sweet potato grow into new plants. Stems can also bear
buds such as in grasses. Leaves and tubers also bear buds in many plants.
am
gr
A. Potato B. Bryophyllum C. Ginger
le
Figure 4: Growth of new plant from bud
Te
Question 9. Which part of a spider plant bears buds?
on
es
hi
During the 1600s, tulips were so valuable in Holland that their bulbs
were worth more than gold. The craze was called tulip mania, or
Te
b. Artificial Methods
(i) Grafting
Grafting involves taking two plants of different breeds and producing superior quality
plant. The plant whose root system is taken is called _____________________ and
the plant whose shoot system is taken is called ________________________.
am
gr
le
Te
on
Figure 5: Method of Grafting
Question 10. Is it possible to graft different species of plants together? If yes, what should be the
es
characteristics of the two species? If no, why not?
hi
nt
Te
Stems with nodes and internodes are planted in soil which grow roots and become
ba
Question 11. Apples, pears, avocados, oranges and roses are commonly grown by stem cutting. Why
this method is preferable as compared to using seeds obtained by sexual reproduction?
am
gr
le
Te
(iii) Layering
In layering a stem is buried in the soil while it is still attached to the parent plant.
on
Roots develop in the buried stem and can grow into individual plants. E.g.
______________. In air layering the bark from a small part of stem is removed,
covered with soil and wrapped with a cloth. Water is sprinkled on this part regularly.
When the stem develops root it is cut from the parent plant and planted as a new
es
plant.
hi
nt
Te
hi
ba
Ta
@
A small tissue, generally from a bud or growing area, is cut from a plant and kept
in a dish containing aseptic growing medium. The tissue soon develops a mass of
cells known as a callus. The callus is then placed in a medium that causes it to
differentiate and produce baby plants. Orchids, chrysanthemum, asparagus,
carnations, etc. are usually grown by this method.
Question 12. Write the advantages of tissue culture? How is it better than stem cutting?
am
gr
le
Te
(Refer video: Vegetative Propagation)
reproductive organs in the same flower. Others may produce different male and female
flowers.
hi
a. Structure of Flower
nt
The male part of the flower is ___________________. The female part of the flower is
_________________. The male gametes of the plant are known as ________________ and are
contained within the _________________. The stigma receives pollen grains in a process known as
_____________________. The style bears the stigma and the ovary. Ovary contains ovules. Ovules
are structures where embryo sacs develop and mature into seed.
am
Did you know ?
Saffron is used as a flavoring agent in cooking.
gr
It is harvested from the stigmas of a type of fall-blooming
crocus - Crocus sativus.
le
Te
b. Pollination
on
The transfer of pollens from anther to stigma of flowers is called pollination. Pollination
can be self pollination or cross pollination.
es
Question 13. Identify the type of pollination in each case.
hi
nt
Te
hi
ba
Ta
A B
@
c. Fertilisation
The pollen grain grows a pollen tube in the stigma and style releasing the male gametes.
The tip of the pollen tube ruptures in the ovule to release two male gametes. One of the
male gametes fertilizes the egg cell in the ovule to form a zygote. The second gamete
fuses with the secondary nucleus to form the endosperm nucleus. The zygote forms
________________. The endosperm nucleus becomes the endosperm of seed. The ovule
forms the _______________.
am
gr
le
Te
on
Figure 8: Growth of pollen tube
es
Misconception: In the life cycle of a flowering plant, the fruit develops before
the seeds.
hi
Clarification: Upon union of the female gamete (in the ovule) with the male
nt
gamete (from the pollen), the seed is formed, and only after that, the fruit
develops from the ovary. In other words, the fruit is developed only after the
process of fertilization which results in the seed formation, as a by-product of
Te
the reproductive process. The fruit develops to protect the seeds, and in some
cases, develop to become "attractive" to animals that will be the agents of seed
dispersal.
hi
ba
Question 14.Some plants like apple and pear have flowers that do not develop into seeds unless
cross fertilized. What advantages does such a mechanism provide? Can it be a disadvantage?
Ta
@
Question 15. What are the thin green structures below the sepals called?
am
gr
le
Te
(Refer video: Reproduction in Plants) on
es
hi
nt
Te
hi
ba
Ta
@
am
chromosomes i.e. diploid condition.
gr
division and second is mitotic division. In simple organisms all germ cells are generally
similar. In complex organisms, germ cells take on differential roles. The egg is generally large
le
and contains a food source. The sperm is small and mobile. Conventionally,
__________________ germ cells are called the male gamete.
Te
Question 16. “Gametes must be produced by meiosis for sexual reproduction”. Why is it so?
on
es
hi
nt
Te
Question 17. Label the given diagram of the male reproductive system.
am
gr
le
Te
on
The testes are the site of sperm production and are housed in a sac protruding out of the body
known as the scrotum.
es
Question 18. Why are the testes located outside the body?
hi
nt
Te
hi
ba
Ta
The testes release the male sex hormone __________________________. The epididymis
collects the haploid cells produced in the testes. It is here that they turn into mobile sperm.
The sperm moves into the vas deferens and then into the ejaculatory duct.
@
The ejaculatory duct connects to the urethra from which sperm is ejected through the male
copulatory organ, the _________________________. The accessory glands such as the
prostate and _____________________________ provide nutrition to the sperm and also aid
in the movement of sperm in the female reproductive system. The fluid coming out during
ejaculation is called semen.
Question 19. Label the given diagram of the female reproductive system.
am
gr
le
Te
on
The female analogue of the testes is _________________________. This organ produces the
female sex hormones _______________________ and _____________________________.
This organ produces eggs, the female gamete. The eggs enter the oviduct/ fallopian tube
es
where they may get fertilized. The fertilized egg is implanted into the endometrium wall of
the uterus. The uterus opens into the cervix and vagina which receives the semen.
hi
Clarification: All ova are eggs but all eggs are not just ova.
Te
The female reproductive system undergoes two cycles known as the _________________ and
menstrual cycles almost every 28 days in preparation for probable fertilization.
a. Ovarian Cycle
am
FSH stimulates one of the follicles in the ovaries to enlarge and mature. The enlarged
follicle stimulates the production of _________________________________. This
gr
hormone triggers ovulation, or release of the egg from the follicle at about day 14. The
ruptured follicle disappears if fertilization does not occur.
le
b. Menstrual Cycle
Te
The menstrual cycle prepares the uterus to receive the fertilized egg. Sex hormones
progesterone and ___________________ prepare the uterine lining the endometrium.
on
Upon ovulation, the endometrium becomes more velvety and becomes richer in blood
vessels.
Question 21. Why do you think the uterine lining becomes thick?
es
hi
nt
Te
If fertilization does not occur, the lining is flushed from the uterus at about day 28. The cycle
then repeats until fertilization occurs.
hi
Pituitary gland
@
Follicle Progesterone
Stimulating
hormone (FSH)
11. Fertilization
The sperm has a sleek design with a long tail to propel it. The head contains the genetic
material: the chromosomes.
am
gr
le
Te
on
es
Question 23. Why do you think mitochondria are clumped near the tail of the sperm?
hi
nt
Te
hi
ba
Ta
Sperms mature in the epididymis and they take about a month to do so. A few sperm reach the
cervix of the female after ejaculation and swim into the acidic environment there. The cervix
@
is covered with mucus and becomes alkaline during ovulation. After fluids from the semen
meet the mucus, it becomes more alkaline and suitable for sperm to survive.
Sperm live only for 24-72 hrs. Only a few hundred to thousand sperms make it to the egg in
the fallopian tube.
Question 24. What are the two barriers that the sperms encounter on reaching the egg?
am
gr
le
Te
The barrier layer present over the ovum is removed by the _________________ enzymes released
by sperm. Only one sperm makes its way into the nucleus of the egg. Upon fertilization, the egg
on
prevents other sperm cells from reaching the egg. The nuclear membranes of both gametes
dissolve allowing chromosomes to pair up. The resulting zygote is _________________ though
both gametes are haploid.
es
am
Question 28. How is carbon dioxide and urea excreted by the fetus removed?
gr
le
Te
on
(Refer video: Fertilization)
es
12. Contraception
hi
am
gr
le
Te
a. Permanent Contraception
_____________________________________ is the procedure of tying or cutting the vas
on
deferens in males to prevent release of sperms. Tubectomy is done in females by tying up the
fallopian tubes to prevent release of eggs.
Birth control pills and injections tamper with the hormonal cycle of women to prevent
hi
ovulation or to prevent the blastocyst from embedding in the endometrium. Male and female
condoms physically prevent ___________________ from reaching the egg. Abstinence from
nt
copulation (from weeks 2-4 of the menstrual cycle) i.e. during ovulation prevents pregnancy.
Spermicides prevent fertilization by ___________________________. Morning after pills
Te
disrupts the uterine walls and prevents a fertilized egg from embedding.
am
gr
le
Te
Question 33. Classify the following diseases as viral or bacterial.
am
2. Spore found in fungi are:
A. Tiny cells protected by thick walls to survive unfavorable conditions
B. Outgrowths from the parent organism
gr
C. Buds formed in a long chain
D. None of these
le
3. Match the following:
i. Testes a. estrogen
Te
ii. Ovary b. site of implantation
iii. Sperm c. testosterone
iv. Uterus d. male gamete
on
4. The number of ova released at a time in female human being is:
5. Site of fertilization in a mammal is
A. Uterus
B. Vagina
es
C. Urethra
D. Fallopian tube
hi
9. Elaborate - Variation beneficial to the species but not necessarily for the individual.
10. Differentiate between binary fission and multiple fission?
11. Which process of reproduction is found in the organism shown in the image below? What are
hi
12. Capacity to regenerate decreases with increase in complexity of the organism. Why?
am
17. What are the different methods of contraception?
18. In tobacco plant, the male gametes have twenty four chromosomes. What is the number of
chromosomes in the female gamete? What is the number of chromosomes in the zygote?
gr
19. A couple wants to space the birth of their second child. Suggest one preventive method which
could be observed
le
a) By the husband
b) By the wife for the same.
Te
20. Why does bread mould grow profusely on a moist slice of bread rather than on a dry slice of
bread?
SOLUTION on
1. A
2. A
es
3. i – c, ii – a, iii – d, iv – b
4. A
5. D
hi
Instructions: This booklet can be used while watching videos. Keep filling the sheet as the
videos proceed.
1. Introduction
(Refer video: Introduction)
Question 1. Why all the children born to same parent look different? Why do twins look alike? Do all
am
twins look alike? What is the difference between monozygotic and dizygotic twins?
gr
le
Te
on
es
hi
nt
Te
2. Heredity
(Refer video: Heredity_ Chromosomes)
hi
am
Chromosomes are present inside the nucleus of cells. There are ___________ pairs of chromosomes
gr
found in human beings. A pair of corresponding chromosomes of the same size and shape is called a
__________________ pair. In the pair both parents contribute one chromosome.
le
Te
Did you know? on
If all 46 chromosomes were combined and arranged lengthwise,
the total length would be 1.8 meters. If all the chromosomes from
all the nuclei in the human body were to be arranged
lengthwise, it would measure around 180 000 million kilometres.
es
hi
nt
Question 4. How many pairs of homologous chromosomes do we have? Is the number same in males
Te
and females?
hi
ba
Ta
@
Haploid cells have only ______________ the chromosomes of diploid cells. If an organism has more
than a pair of homologous chromosomes, the organism is said to be
______________________________. E.g.: ____________________________. The number of
chromosomes varies from organisms to organisms.
am
gr
le
Te
Figure 1: Chromosomes in Humans
a. Sex Determination
on
Sex of a child is determined by the type of sex chromosomes present in them which in turn
depends on the type of sperm that fertilizes the ovum.
es
Question 5. Fill in the boxes.
hi
Mother Father
nt
XX XY
Te
hi
XY XX
Chromosomes constitute genes which in turn form the functional units of heredity. Allele is a variant
form of a gene. Humans are called diploid organisms because they have two alleles for each gene,
with one allele inherited from each parent.
@
am
gr
le
b. Mendel’s Experiments
(Refer video: Heredity_ Mendel’s Pea Experiment)
Te
Mendel is known as the father of genetics this is because the basic principles of genetics were
on
discovered by Mendel. He studied the inheritance pattern of characters in garden pea.
Question 7. Why did Mendel choose garden pea for his experiments?
es
hi
nt
Te
hi
ba
Ta
@
am
gr
le
There are seven pairs of contrasting traits found in pea. All of them are shown in the following table
Te
on
es
hi
nt
Te
hi
am
gr
le
Te
Question 10. A mother with green eyes and a father with black eyes (who has alleles only of black
on
eyes) have children who only have black eyes. Which trait do you think is dominant and which is
recessive?
es
hi
nt
Te
hi
ba
Ta
am
gr
le
Te
on
es
Figure 3: Monohybrid Cross
Question 11. If yellow colour of seeds (Y) is a recessive seed trait while green colour of seeds (G) is a
nt
dominant trait, fill up the table for the characteristics of all possible combinations. Calculate the ratio
of the number of yellow seed plants possible to the green seed plants possible if a randomized trial is
Te
YY X YG Y Y
hi
Y
ba
G
Ta
Ratio:
am
Possible combinations for Yellow:
gr
Ratio:
le
(Refer video: Heredity_ Introduction to Punnett Square)
Te
When two pure breeding varieties of parental plants that differ in two characters are crossed, it is
called a dihybrid cross.
Question 12. Use the Punnett square below to find the genotypic and phenotypic ratio for the case of
on
wrinkled (r)/round (R) and Yellow (Y)/Green (y) peas. Use the crossing of the combination given in
box.
es
RRYy x Rryy
hi
nt
Te
hi
ba
Ta
Phenotypic variation leads to favorable and unfavorable traits in the environment. This
influences natural selection. Evolution is mostly driven by natural selection.
am
gr
le
Te
on
es
Darwin formulated his theory of evolution by natural selection by observing finches on the
___________________Islands which now belongs to Ecuador. The beaks of different species of
hi
finches were adapted to the food they ate. These variations were essential for the finches to adapt to
their environment.
nt
Te
hi
ba
Ta
@
am
gr
le
Te
on
This genetic similarity can be particularly problematic for the survival of species as there is little
chance of variation that can help the species adapt to changes in the environment. If a population is
isolated for a long time, the population may become a new species. This is a process known as
___________________.
es
am
gr
le
Te
Question 17. The Stephen’s Island wren was wiped out from all islands except Stephen Island due to
the introduction of rats by the Maori people. The species became extinct in the late 1800s when the
local light house keeper’s cat, Tibbles ate the last of the Stephen Island wrens. The image on the right
on
is a chewed up specimen. Can you explain this in the light of Genetic drift about small populations
and genetic similarity? Why is it so important to have many healthy populations of endangered
animals?
es
hi
nt
Te
hi
ba
Ta
@
Question 18. A population of mice was made to fear cheese by making the mice associate cheese with
cats. (The mice were scared with cats when provided with cheese by scientists). This fear of cheese
am
was found to be inherited by the next generation of mice. Do you think this trait was passed down as
heredity due to changes in genes? Which clue presents this?
gr
le
Te
on
The process of introducing preferable or useful traits in a species by selectively breeding individuals
es
with those traits is called artificial selection.
Question 19. The blood hound is a breed of dog that was originally bred to track down deer for
hi
hunting. Which trait was artificially selected for breeding this dog?
nt
Te
hi
ba
Ta
@
am
Question 20. Define the following types of speciation.
gr
Allopatric
speciation
le
Te
Sympatric
on
speciation
es
hi
Peripatric
nt
Speciation
Te
hi
Parapatric
Speciation
ba
Ta
@
Temporal isolation
Sympatric speciation usually occurs in plants due to change in chromosomal number. Peripatric and
parapatric speciation is characterized by a smaller population of the new species in comparison to the
main ones.
am
gr
le
All mammals have the same limb structure because they have descended from the same ancestor.
Te
Homologous structures are parts of the body that are similar in structure to other specie’s comparative
parts while ________________________________ are similar features of different animals that have
evolved due to convergent evolution. on
Misconception: Evolution claims that we evolved from monkeys.
Clarification: It doesn’t even claim that we evolved from
es
chimpanzees! Rather, evolution predicts that all life on the planet is related.
hi
Question 22. Wings of bird and wings of insect-are these organs homologous or analogous? Give one
suitable reason to support your answer.
nt
Te
hi
ba
Question 23. What proof can you give for evolution? What structures do we share with bacteria that
Ta
6. Human Evolution
(Refer video: Human Evolution)
Mitochondrial DNA is inherited purely from the mother’s side. Using this tool we can trace
am
back the lineage of all humans to Africa. Human populations migrated all across the world in
search of greener pastures to Europe, Asia, America, Australia and the Pacific Islands.
gr
Did you know?
Our fists have constantly evolved to give a punch. Our fingers
le
and palms have become shorter while our thumbs have become
stronger and more flexible.
Te
on
Question 24. Genealogical evidence suggests that Native Americans are related to people from
Eastern Siberia and Northern Asia. From where do you think the early Native Americans migrated
es
from?
hi
nt
Te
hi
ba
Ta
@
am
gr
Question 26. Why are lefties outnumbered by right-handed people?
le
Te
on
es
hi
nt
Te
hi
ba
Ta
@
1. If a round, green seeded pea plant (RRyy) is crossed with wrinkled, yellow seeded pea plant,
(rrYY) the seeds produced in F1 generation are:
A. round and yellow
B. round and green
C. wrinkled and green
am
D. wrinkled and yellow
2. In human males all the chromosomes are paired perfectly except one. This/these unpaired
i. Large chromosome
gr
ii. Small chromosome
iii. Y-chromosome
X –chromosome
le
iv.
A. (i) and (ii)
Te
B. (iii) only
C. (iii) and (iv)
D. (ii) and (iv)
3. Select the incorrect statement.
on
A. Frequency of certain genes in a population changes over several generations.
B. Reduction in weight of the organism due to starvation is genetic.
C. Low weight parents can have heavy weight progeny.
es
D. Traits which are not inherited over generations do not cause evolution.
4. Select the group which shares maximum number of common characteristics.
hi
am
13. Do all variations in a particular species have equal chances of survival in an environment?
14. Explain the terms: (i) Speciation (ii) Natural selection
15. Explain how equal genetic contribution of male and female parents is ensured in the progeny.
gr
16. Discuss law of segregation or purity of gametes.
17. When is a recessive trait capable of expressing itself? Write its expression with respect to
le
height of plant (Genotype).
18. When a pesticide is sprayed on a population of insects, all insects do not get killed. Give
Te
reason.
19. What is the percent of ab gamete produced by AaBb gamete?
20. A normal pea plant bearing colored flowers suddenly starts producing white flowers. What
could be the possible cause?
on
SOLUTION
es
1. A
2. C
hi
3. B
4. A
nt
5. A
17. Hint – Think of the effect of dominant trait on recessive trait.
Te
hi
ba
Ta
@