You are on page 1of 1

!

" # $
View Cart | Contact Us

Search Products...

MENU

Home / Fuel Pumps / In-Line / Brushless In-Line 3.5 Spur


Gear Pump with True Variable Speed Control

Brushless In-Line 3.5


Spur Gear Pump with
True Variable Speed
Control
$1,345.93
Starting at $122/mo with 
. Prequalify now
P/N 11195 Brushless 3.5 Spur Gear Pump with TVS
Controller
Pro-Series In-Line Performance Plus Advanced
Technology

The Pro-Series performance you expect and


more:
Fuel injected engines: GAS
up to 2400 FWHP – naturally aspirated
up to 1800 FWHP – forced air induction
Carbureted engines: GAS
Up to 2600 FWHP – naturally aspirated
Up to 2000 FWHP – forced air induction
Fuel injected engines: E85
up to 1680 FWHP – naturally aspirated
up to 1260 FWHP – forced air induction
Carbureted engines: E85
Up to 1820 FWHP – naturally aspirated
Up to 1400 FWHP – forced air induction
Fuel injected engines: METHANOL
up to 840 FWHP – naturally aspirated
up to 630 FWHP – forced air induction
Carbureted engines: METHANOL
Up to 910 FWHP – naturally aspirated
Up to 700 FWHP – forced air induction
Lighter than the traditional Pro-Series pump.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
New integral spur-gear pumping mechanism.
90-PSI continuous operating pressure and up to
150-PSI peak pressure, base plus boost.
Integral, True Variable Speed motor controller
reduces pump speed during low-load, light
throttle operation, keeping fuel cooler while
enhancing reliability.
ORB-12 inlet and ORB-10 outlet ports.
Requires straight 12-VDC to 16-VDC power
supply.
TVS controllers are not compatible with OEM
pulse modulated fuel pump drivers (FPDM) or
legacy Aeromotive fuel pump speed controllers
(FPSC). An analog 0-5 VDC signal, such as that
from a TPS or MAP sensor required for True
Variable Speed operation.

EFI Rated bow of 1,250 lbs./hr. @ 40 psi, 13.5 volts


Carb Rated Flow of 1,350 lbs./hr. @ 9 psi, 13.5 volts

Aeromotive’s Inegral, True Variable Speed (TVS)


Brushless Motor Controller features built-in pump speed
control via a dedicated 0-5 volt DC analog input. The
TVS Controller capitalizes on our brushless motor
technology by reducing fuel bow and dropping already
low current draw during low engine demand, minimizing
the introduction of both motor and environmental heat.

This product is not legal for sale or use on emission-


controlled vehicles except when used as a direct
replacement part matching OEM specifcations.

View Installation Instructions Here

1 Add to cart

Debit or Credit Card

SKU: 11195 Categories: Brushless, Fuel Pumps, In-Line

Description

Additional information

Pump Details

Description

Aeromotive’s True Variable Speed Controller


offers the advantages of built-in pump speed
control via a dedicated 0-5V analog DC input
signal. The Controller capitalizes on our
existing brushless technology by reducing fuel
bow during low engine demand and
decreasing an already low current draw,
therefore minimizing both motor heat the
introduction of environmental via reduced fuel
recycling. This product is not legal for sale or
use on emission-controlled vehicles except
when used as a direct replacement part
matching OEM specifcations.

Related products

6-GPM Belt Drive Pump Kit


SKU: 17140

Add to cart

A2000 Carbureted Fuel Pump


SKU: 11202

Add to cart

Billet Hex Drive Fuel Pump


SKU: 11107

Add to cart

A3000 Complete Assembly


SKU: 11215

Add to cart

Sales and Tech Support: 913-647-7300


Tech Support Email:
tech@aeromotiveinc.com

Subscribe

Name*

Email*

Subscribe

© 2020 Aeromotive, Inc.

!
! !
" !
# !
$

You might also like