Professional Documents
Culture Documents
In casting experiments performed using a certain alloy and type of sand mold, it took 155
seconds for a cube-shaped casting to solidify. The cube was 50 mm on a side.
1
Second Quiz EIND 5053: Product Design and Manufacturing
A sprue is 300 mm long and has a diameter of 125 mm at the top. The molten metal level
in the pouring basing (which is much larger than the top of the sprue) is taken to be 75 mm
from the top of the sprue for design purposes. If a flow rate of 650 mm3/s is to be achieved,
what should be the diameter at the bottom of the sprue? Will the sprue aspirate? Explain.
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Good Luck