Professional Documents
Culture Documents
This Software Works Only at PC With Intel Processor, Otherwise Dont Try at your
Stable PC because you may lose data ! get another Laptop Or PC with Fresh windows
7 32bit !
*************
The software works as it is! Software has not been changed!
The emulator works only on Windows 7/8 x32 x64!
Before installing, remove all antiviruses and disable the firewall if available!
************
All actions are performed on behalf of the Administrator. The right button on the file
"Run as Administrator"
Install drivers for Senselock in the drivers folder by running the file "InstWiz3.exe"
1. In the folder "emulator" select the desired folder with the capacity
of your system "win7_win8_64bit" or "win7_win8_32bit"
Run the file "install.cmd" Expect messages:
"DONE!
should REBOOT your computer after first install!
Press any key to exit ... "
Close the window, reboot.
If the system has rebooted. proceed to paragraph 3.
In This Failure Case you will have to Change PC to based " Intel
Pentium " Processor
3. In the folder "emulator" select the desired folder with the capacity
of your system "win7_win8_64bit" or "win7_win8_32bit"
Run the file "install.cmd" Expect messages:
"DONE!
should REBOOT your computer after first install!
Press any key to exit ... "
Now you do not need to reboot.
***********
6. And the most highlight !!! You can add your software (your keys)
which is up to November 2017!
Open in text "dumps.reg" located in the folder "win7_win8_64bit" or
"win7_win8_32bit"
and add the key number to a new line in the same format, observing
the case of letters. Save, and run "reload.cmd".
The generated text file and the saved registry file will be saved, since
this is a guarantee of software ligation in case of hardware changes,
Yes, software is tied by hardware. Changing HDD SSD does not affect
the operation of the software.