Professional Documents
Culture Documents
pinoybix.org/2020/07/mcq-in-dc-circuits-part-8-ree-board-exam.html
This is the Multiple Choice Questions Part 8 of the Series in DC Circuits as one of the
Electrical Engineering topic. In Preparation for the REE Board Exam make sure to expose
yourself and familiarize in each and every questions compiled here taken from various
sources including but not limited to past Board Exam Questions in Electrical Engineering
field, Electrical Engineering Books, Journals and other Electrical Engineering References.
ELECTRIC CELLS
1/19
Choose the letter of the best answer in each questions.
When the cells are in series voltages add, while current capacity is _______.
B. Zero
C. Infinite
View Answer:
Answer: Option A
Solution:
Refers to an action in the operation of secondary cells reforming the electrodes in a chemical
reaction where dc voltage is supplied externally.
A. Polarizing cells
B. Charging cells
C. Aligning cells
D. Discharging cells
View Answer:
Answer: Option B
Solution:
What type of cell that cannot be recharged which cannot restore chemical reaction?
A. Primary cell
B. Secondary cell
2/19
D. Nickel-cadmium cell
View Answer:
Answer: Option B
Solution:
A. A load
B. A dry cell
C. A storage cell
D. A wet cell
View Answer:
Answer: Option B
Solution:
A. cell
B. Edison cell
C. Mercury cell
View Answer:
Answer: Option D
Solution:
What is the other term of the secondary cells considering its capability to accept recharging?
A. Reaction cell
B. Primary cell
3/19
C. Storage cell
D. Dry cell
View Answer:
Answer: Option C
Solution:
A. 6
B. 30
C. 3
D. 150
View Answer:
Answer: Option D
Solution:
View Answer:
Answer: Option C
Solution:
Find the required battery capacity needed to operate on electronic equipment with power
rating of 200 watts and 10 volts at 6 hours.
4/19
A. 60
B. 1200
C. 20
D. 120
View Answer:
Answer: Option D
Solution:
A cell(s) that can be operated or used in a horizontal, vertical or any position where its
electrolyte cannot be spilled in any position
A. Primary cells
B. Secondary cells
C. Dry cells
D. Battery
View Answer:
Answer: Option A
Solution:
It is an indication of the current supplying capability of the battery for a specific period of
time, e.g. 400 ampere-hour.
A. Rating
B. Capacity
C. Capability
D. Current load
View Answer:
Answer: Option B
Solution:
5/19
362. ECE Board Exam March 1996
A. Lithium
B. Lead-acid
C. Silver cadmium
D. Silver-zinc
View Answer:
Answer: Option A
Solution:
A. 12 cells
B. 4 cells
C. 8 cells
D. 10 cells
View Answer:
Answer: Option B
Solution:
Component of solar battery which uses light energy to produce electromagnetic force
A. Alkaline cell
B. Polymer cell
C. Lithium cell
D. Selenium cell
View Answer:
Answer: Option D
6/19
Solution:
If a dry cell has an internal resistance of 0.50 ohm and emf of 2 volts, find power delivered in
a one ohm resistor.
A. 1.33 watts
B. 1.66 watts
C. 3.66 watts
D. 1.77 watts
View Answer:
Answer: Option A
Solution:
Parallel cells have the same voltage as one cell but have _____.
A. Unstable resistance
View Answer:
Answer: Option D
Solution:
A battery with capacity of 100 Ah and 12 volts rating will run an electronic equipment at
exactly 20 hours, how much power is needed?
A. 60 watts
B. 20 watts
C. 10 watts
7/19
D. 30 watts
View Answer:
Answer: Option A
Solution:
A. 3.5 V
B. 2.5 V
C. 1.5 V
D. 0.5 V
View Answer:
Answer: Option C
Solution:
What is the reason why more cells can be stored in a given area with dynamic cells?
View Answer:
Answer: Option B
Solution:
A radio equipment will be used at 70% at 50 amperes rating for 5 hours. How much capacity
of dry battery is needed?
A. 35
8/19
B. 17.5
C. 250
D. 175
View Answer:
Answer: Option D
Solution:
371. The potential at the terminals of the battery falls from 9 V on open circuit to 6 volts when
a resistor of 10 ohms is connected across its terminals. What is the internal resistance of the
battery?
A. 5 Ω
B. 4 Ω
C. 3 Ω
D. 2 Ω
View Answer:
Answer: Option A
Solution:
372. A battery is formed of five cells joined in series. When the external resistance is 4 ohms,
the current is 1.5 A and when the external resistance is 9 ohms, the current falls to 0.75 A.
Find the internal resistance of each cell.
A. 0.5 ohm
B. 1.0 ohm
C. 0.2 ohm
D. 0.3 ohm
View Answer:
Answer: Option C
Solution:
373. A 12 V source with 0.05 Ω resistance is connected in series with another 12 volt with
0.075 Ω resistance with a load of 2 Ω. Calculate the power dissipated in the load.
9/19
A. 365 watts
B. 127 watts
C. 105 watts
D. 255 watts
View Answer:
Answer: Option D
Solution:
374. A 24 V source with 0.05 Ω resistance is connected in parallel with another 24 V with
0.075 Ω resistance to a load of 2 Ω. Calculate the current delivered by the source with a 0.05
Ω resistor.
A. 7 amperes
B. 10 amperes
C. 5 amperes
D. 12 amperes
View Answer:
Answer: Option A
Solution:
375. A battery can deliver 10 joules of energy to move 5 coulombs of charge. What is the
potential difference between the terminals of the battery?
A. 2 V
B. 50 V
C. 0.5 V
D. 5 V
View Answer:
Answer: Option A
Solution:
10/19
A. 3 A
B. 2 A
C. 1/8 A
D. none of these
View Answer:
Answer: Option C
Solution:
A. high voltage
B. high current
D. none of these
View Answer:
Answer: Option A
Solution:
A. high current
B. high voltage
D. none of these
View Answer:
Answer: Option C
Solution:
379. Four cells, each of internal resistance 1 ohm, are connected in parallel. The battery
resistance will be ____.
A. 4 ohms
11/19
B. 0.25 ohm
C. 2 ohms
D. 1 ohm
View Answer:
Answer: Option B
Solution:
B. size of electrodes
D. none of these
View Answer:
Answer: Option A
Solution:
381. In order to get maximum current in series – parallel grouping, the external resistance
should be ____ the total internal resistance of the battery.
A. less than
B. more than
C. equal to
D. none of these
View Answer:
Answer: Option C
Solution:
382. The positive terminal of a 6-V battery is connected to the negative terminal of a 12-V
battery whose positive terminal is grounded. The potential at the negative terminal of the 6V
battery is ____ volt.
A. +18
12/19
B. –12
C. -6
D. -18
View Answer:
Answer: Option D
Solution:
383. The positive terminal of a 6-V battery is connected to the negative terminal of a 12-V
battery whose positive terminal is grounded. The potential at the positive terminal of the 6-V
battery is ____ volt.
A. +6
B. -6
C. -12
D. +12
View Answer:
Answer: Option C
Solution:
A. lead peroxide
B. sponge lead
D. all of these
View Answer:
Answer: Option D
Solution:
13/19
C. it gives out energy
View Answer:
Answer: Option B
Solution:
B. just one
D. either A or B
View Answer:
Answer: Option C
Solution:
A. watt-hours
B. watts
C. amperes
D. ampere-hours
View Answer:
Answer: Option D
Solution:
A. rate of charge
B. rate of discharge
C. temperature
14/19
View Answer:
Answer: Option A
Solution:
D. both B and C
View Answer:
Answer: Option D
Solution:
A. trickle charging
B. incomplete charging
C. heavy discharging
D. fast charging
View Answer:
Answer: Option B
Solution:
A. nickel hydroxide
D. all of these
View Answer:
Answer: Option D
15/19
Solution:
View Answer:
Answer: Option B
Solution:
393. As compared to a lead-acid cell, the efficiency of a nickel-iron cell is less due to its
A. lower e.m.f.
D. compactness
View Answer:
Answer: Option C
Solution:
A. prevent sulphation
View Answer:
Answer: Option B
Solution:
16/19
A. a dose of H2SO4
D. none of these
View Answer:
Answer: Option D
Solution:
396. The sediment which accumulates at the bottom of a lead-acid battery consist largely of
A. lead-peroxide
B. lead-sulphate
C. antimony-lead alloy
D. graphite
View Answer:
Answer: Option C
Solution:
397. The reduction of battery capacity at high rates of discharge is primarily due to
View Answer:
Answer: Option C
Solution:
A. power stations
B. emergency lighting
17/19
C. telephone exchange installation
D. all of these
View Answer:
Answer: Option D
Solution:
399. Any charge given to the battery when taken off the vehicle is called
A. bench charge
B. step charge
C. float charge
D. trickle charge
View Answer:
Answer: Option A
Solution:
400. Storage battery electrolyte is formed by the dissolving of ____ acid in water.
A. hydrochloric
B. sulfuric
C. acetic
D. atric
View Answer:
Answer: Option B
Solution:
Following is the list of practice exam test questions in this brand new series:
MCQ in DC Circuits
PART 1: MCQ from Number 1 – 50 Answer key: included
PART 2: MCQ from Number 51 – 100 Answer key: included
18/19
PART 3: MCQ from Number 101 – 150 Answer key: included
PART 4: MCQ from Number 151 – 200 Answer key: included
PART 5: MCQ from Number 201 – 250 Answer key: included
PART 6: MCQ from Number 251 – 300 Answer key: included
PART 7: MCQ from Number 301 – 350 Answer key: included
PART 8: MCQ from Number 351 – 400 Answer key: included
PART 9: MCQ from Number 401 – 450 Answer key: included
PART 10: MCQ from Number 451 – 500 Answer key: included
MORE ON: MCQ in DC Circuits Series | REE Board Exam
DOWNLOAD PDF / PRINT
Please do Subscribe on YouTube!
P inoyBIX educates thousands of reviewers and students a day in preparation for their board
examinations. Also provides professionals with materials for their lectures and practice
exams. Help me go forward with the same spirit.
Subscribe
Prev Article Next Article
19/19