Professional Documents
Culture Documents
Catth255aehq6083 01
Catth255aehq6083 01
TH255
Telehandler
Specifications
Engine Hydraulic System — Implement
®
Model Cat C4.4 Stage IIIA DIT Pump Type Single Section Gear Pump
Gross Power 63 kW 84 hp Maximum system
Maximum Torque 353 Nm/1400 rpm pressure 240 bar
Displacement 4.4 litre Maximum Pump Flow 85 litre/min
• AuxiliaryHydraulicCircuitusedforallattachments
Weights equipped with cylinders or other hydraulic components.
Consists of valves, controls, and hydraulic lines.
Operating Weight with
Carriage and Forks 5897 kg Transmission
Operating Specifications Transmission Hydrostatic
Rated Load Capacity 2500 kg Forward Variable Speed
Maximum Lift Height 5600 mm Reverse Variable Speed
Maximum Forward Reach 3250 mm Boom Performance
Top Travel Speed 26 km/h
Boom Up 6.2 Seconds
Load at Max Height 2500 kg
Boom Down 4.3 Seconds
Load at Max Reach 940 kg
Tele In 3.4 Seconds
Turning Radius Over Tyres 3200 mm
Tele Out 6.3 Seconds
Turning Radius Over Forks 4254 mm
Bucket Dump 2.0 Seconds
Service Refill Capacities Bucket Crowd 2.4 Seconds
Fuel Tank 91 litre Drawbar Pull (Loaded) 38.7 kN
Hydraulic System 98 litre Instruments
Tyres • Indicatorsformachinehours,fuel-level,steermode,
steering pressure, battery charge, coolant temperature,
Standard 14.00 x 17.5 Foam Filled parking brake and engine pre-heat.
Brakes • Reversemotionalarm.
• Panelandswitchesareilluminatedfornightoperation.
Service Brakes Inboard wet disc brakes on front axle
Parking Brakes Wet disc spring-applied hydraulic release
• Lightondashindicateswhenbrakeison.
Axles
• Planetaryonfrontandrearaxles.
• Highbiaslimitedslipdifferentialonfrontaxle.
Courtesy of Crane.Market
TH255 Telehandler
Dimensions
TL255
1920 mm
279 mm
1820 mm 2290 mm
3660 mm
IMPORTANT
6m
70° Rated lift capacities shown are with machine
equipped with standard carriage and pallet
-10
E
20
30 40
50 60 80
70
30 40
50 60 80
70
2000 kg
30°
5
TL255
40 50
10°
0m
0°
4m 3m 2m 1m 0m
600 mm
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at AEHQ6033-01 (10-2009)
www.cat.com
© 2009 Caterpillar
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH336
Telehandler
Sound
Operator Sound 78 dB(A)
Exterior Sound
Courtesy of Crane.Market
TH336 Telehandler
Dimensions
2323 mm
1753 mm
430 mm
375 mm
2950 mm
4253 mm
1988 mm
2400 mm 4621 mm
7m IMPORTANT
67.5º Rated lift capacities shown are with machine
2250 kg equipped with standard carriage and pallet
6m forks. When lifting loads, the machine requires
2700 kg a firm surface with undamaged, properly inflated
50º tyres. Machine specifications and stability are
5m based on rated lift capacities at specific boom
angles and boom lengths. (If specifications
40º are critical, the proposed application should
be discussed with your dealer.)
4m
1750 kg
4m 3m 2m 1m
600 mm
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at AEHQ6050-02 (03-2010)
www.cat.com
© 2010 Caterpiller
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH406
Telehandler
Specifications
Engine Hydraulic System
Model Maximum System Pressure 250 bar
Standard Cat ® C4.4 DITAAC Maximum Pump Flow 150 litre/min
Optional Cat ® C4.4 DITAAC ACERT ™ Pump Type Variable displacement
Gross Power load sensing axial
piston pump
Standard 74.5 kW/101 hp
Auxiliary Hydraulic Supply
Optional 93.1 kW/126 hp
Intermittent 80 litre/min
Maximum Torque
Continuous 60 litre/min
Standard 410 Nm/1400 rpm
Optional 496 Nm/1400 rpm Transmission Speeds
Bore 105 mm
Forward
Stroke 127 mm
1 7 km/h
Displacement 4.4 litre
2 12 km/h
• All engine horsepower (hp) are metric.
3 21 km/h
Weights 4 32 km/h
5 (ACERT engine option only) 40 km/h
Operating Weight with Carriage & Forks
Reverse
Non-Agriculture 7200 kg
1 7 km/h
Agriculture 7320 kg
2 12 km/h
Operating Specifications 3 21 km/h
Rated Load Capacity 3700 kg Boom Performance
Maximum Lift Height 6100 mm
Boom Up 5.0 Seconds
Maximum Forward Reach 3109 mm
Boom Down 4.0 Seconds
Top Travel Speed 40 km/h
Tele In 4.5 Seconds
Load at Max Height 2500 kg
Tele Out 5.0 Seconds
Load at Max Reach 1500 kg
Crowd Forward (dump) 3.0 Seconds
Outside Turning Radius Over Tyres 3700 mm
Crowd Backward 3.0 Seconds
Outside Turning Radius Over Forks 4670 mm
Combined
Service Refill Capacities Up and Out 8.0 Seconds
Fuel Tank 150 litre Down and In 6.0 Seconds
Hydraulic Tank 90 litre Drawbar Pull 74.5 kW 82,4 kN
Drawbar Pull 93.1 kW 86,8 kN
Tyres Bucket Breakout Force to ISO8313 55 kN
Standard 15.5/80-24 16PR Boom Breakout Force 36 kN
Brakes
Service Brakes Servo assisted on front axle
Parking Brakes Mechanical on front axle
Sound
Operator Sound 78 dB(A)
Exterior Sound
(74.5 kW Engine) 106 dB (A)
(93.1 kW Engine) 107 dB (A)
Courtesy of Crane.Market
TH406 Telehandler
Dimensions
2323 mm
1753 mm
430 mm
662 mm
2950 mm
1988 mm 4253 mm
2382 mm 4621 mm
IMPORTANT
67.5° Rated lift capacities shown are with machine
B equipped with carriage and pallet forks. The
6m C machine must be level on a firm surface with
undamaged, properly inflated tyres. Machine
50° specifications and stability are based on rated
B lift capacities at specific boom angles and boom
5m lengths. (If specifications are critical, the proposed
A application should be discussed with your dealer.)
40° DO NOT exceed rated lift capacity loads,
3700 kg
2m
10°
1m
0°
0m
4m 3m 2m 1m 0m
500 mm
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at HEHB3859-05 (02-2010)
www.cat.com
© 2010 Caterpillar
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH407
Telehandler
Specifications
Engine Hydraulic System
Model Maximum System Pressure 250 bar
Standard Cat® C4.4 DITAAC Maximum Pump Flow 150 litre/min
Optional Cat® C4.4 DITAAC-ACERT™ Pump Type Variable displacement
Gross Power load sensing axial
piston pump
Standard 74.5 kW 101 hp
Auxiliary Hydraulic Supply
Optional 93.1 kW 126 hp
Intermittent 80 litre/min
Maximum Torque
Continuous 60 litre/min
Standard 410 Nm/1400 rpm
Optional 496 Nm/1400 rpm Transmission Speeds
Bore 105 mm
Forward
Stroke 127 mm
1 7 km/h
Displacement 4.4 litre
2 12 km/h
Weights 3 21 km/h
4 32 km/h
Operating Weight with Carriage & Forks
5* 40 km/h
Non-Agriculture 7700 kg
Reverse
Agriculture 7820 kg
1 7 km/h
Operating Specifications 2 12 km/h
Rated Load Capacity 3700 kg 3 21 km/h
Maximum Lift Height 7300 mm * ACERT engine option only
Maximum Forward Reach 3763 mm
Top Travel Speed 40 km/h Boom Performance
Load at Max Height 2000 kg Boom Up 7.5 Seconds
Load at Max Reach 1300 kg Boom Down 5.1 Seconds
Turning Radius Over Tyres 3750 mm Tele In 4.8 Seconds
Turning Radius Over Forks 4740 mm Tele Out 5.7 Seconds
Crowd Forward (dump) 3.0 Seconds
Service Refill Capacities Crowd Backward 3.0 Seconds
Fuel Tank 150 litre Combined
Hydraulic Tank 90 litre Up and Out 11.5 Seconds
Down and In 6.6 Seconds
Tyres
Drawbar Pull 74.5 kW 83,4 kN
Standard 15.5/80-24 16PR Drawbar Pull 93.1 kW 87,3 kN
Brakes Bucket Breakout Force to ISO 8313 65 kN
Boom Breakout Force 42 kN
Service Brakes Servo assisted on front axle
Parking Brakes Mechanical on front axle
Sound
Operator Sound 78 dB(A)
Exterior Sound
74.5 kW Engine 106 dB(A)
93.1 kW Engine 107 dB(A)
Courtesy of Crane.Market
TH407 Telehandler
Dimensions
2385 mm
1838 mm
430 mm
962 mm
3050 mm
1988 mm 4679 mm
2382 mm 5153 mm
IMPORTANT
2000 kg 67.5° Rated lift capacities shown are with machine
7m equipped with standard carriage and pallet
60° forks. When lifting loads, the machine requires
a firm surface with undamaged, properly inflated
tyres. Machine specifications and stability are
6m 50° based on rated lift capacities at specific boom
angles and boom lengths. (If specifications
are critical, the proposed application should
5m 40° be discussed with your dealer.)
3700 kg DO NOT exceed rated lift capacity loads,
as unstable and dangerous machine
4m conditions will result.
30°
3000 kg
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at AEHQ6035-02 (03-2010)
www.cat.com
© 2010 Caterpillar
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH414
Telehandler
Specifications
Engine Hydraulic System
®
Model Cat C4.4 DITAAC Maximum System Pressure 250 bar
Gross Power 74.5 kW/101 hp Maximum Pump Flow 113 litre/min
Maximum Torque 410 Nm/1400 rpm Pump Type Variable displacement
Bore 105 mm load sensing axial
piston pump
Stroke 127 mm
Auxiliary Hydraulic Supply
Displacement 4.4 litre
Intermittent 80 litre/min
Weights Continuous 60 litre/min
Operating Weight with Carriage & Forks 9550 kg Transmission Speeds
Operating Specifications Forward
Rated Load Capacity 1 7 km/h
On Tyres 3700 kg 2 12 km/h
On Stabilizers 3700 kg 3 21 km/h
Maximum Lift Height 4 32 km/h
Stabilizers Up 13 700 mm Reverse
Stabilizers Down 13 700 mm 1 7 km/h
Maximum Forward Reach 9225 mm 2 12 km/h
Top Travel Speed 32 km/h 3 21 km/h
Load at Max Height Boom Performance
Stabilizers Up 1250 kg
Boom Up 13.0 Seconds
Stabilizers Down 2500 kg
Boom Down 8.0 Seconds
Load at Max Reach
Tele In 11.0 Seconds
Stabilizers Up 350 kg
Tele Out 11.0 Seconds
Stabilizers Down 1000 kg
Crowd Forward (dump) 3.0 Seconds
Outside Turning Radius Over Tyres 3805 mm
Crowd Backward 3.0 Seconds
Outside Turning Radius Over Forks 5640 mm
Combined
Drawbar Pull 74.5 kW 88,0 kN
Up and Out 23.0 Seconds
Down and In 13.4 Seconds
Service Refill Capacities Bucket Breakout Force to ISO 8313 65 kN
Fuel Tank 150 litre Boom Breakout Force 45 kN
Hydraulic Tank 90 litre Sound
Tyres Operator Sound 78 dB(A)
Standard 15.5/80-24 16PR Exterior Sound (74.5 kW Engine) 106 dB(A)
Brakes
Service Brakes Servo assisted on front axle
Parking Brakes Mechanical on front axle
Courtesy of Crane.Market
TH414 Telehandler
Dimensions
2592 mm
1979 mm
458 mm
1225 mm
3200 mm
2036 mm 5091 mm
2449 mm 6325 mm
14 m
1250 kg 75° 14 m
2500 kg 75°
13 m 60° 13 m 60°
12 m 12 m
50° 50°
11 m 11 m
2000
10 m kg 10 m
40° 40°
9m 9m
3000
8m kg 8m
2500 kg
30° 30°
3700 kg
kg
7m 7m
3000 kg
3700
6m 6m
1500 kg
2500 kg
1000 kg
20° 20°
2000 kg
5m 5m
1500 kg
750 kg
1000 kg
4m 4m
500 kg
350 kg
3m 3m
10° 10°
2m 2m
1m 1m
0m 0° 0m 0°
600 mm 600 mm
-1 m -1 m
9m 8m 7m 6m 5m 4m 3m 2m 1m 0m 9m 8m 7m 6m 5m 4m 3m 2m 1m 0m
IMPORTANT
Rated lift capacities shown are with machine DO NOT exceed rated lift capacity loads, as unstable This machine meets or exceeds AS1418.19-2007
equipped with standard carriage and pallet forks. and dangerous machine conditions will result. as originally manufactured for intended
When lifting a load, the machine requires a firm applications. When utilising a suspended
DO NOT tip the machine forward
surface with undamaged, properly inflated tyres. load, the JLG Load Management Indicator
to determine the allowable load.
Machine specifications and stability are based System (LMIS) must be installed in order
on rated lift capacities at specific boom angles Due to continuous product improvements, to remain compliant with AS1418.19-2007.
and boom lengths. (If specifications are critical, machine specifications and/or equipment
the proposed application should be discussed changes may be made without prior notification.
with your dealer.)
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at AEHQ6036 02(12-2010)
www.cat.com
© 2010 Caterpillar
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH417
Telehandler
Specifications
Engine Hydraulic System
®
Model Cat C4.4 DITAAC Maximum System Pressure 250 bar
Gross Power 74.5 kW/101 hp Maximum Pump Flow 150 litre /min
Maximum Torque 410 Nm/1400 rpm Pump Type Variable displacement
Bore 105 mm load sensing axial
piston pump
Stroke 127 mm
Auxiliary Hydraulic Supply
Displacement 4.4 litre
Intermittent 80 litre/min
Weights Continuous 60 litre/min
Courtesy of Crane.Market
TH417 Telehandler
Dimensions
2630 mm
2080 mm
401 mm
1275 mm 3200 mm
2078 mm 5135 mm
2440 mm 6670 mm
TH417 TH417
18 m 18 m 72°
70°
17 m 17 m
16 m 16 m 60°
60°
15 m 15 m
50°
14 m 50° 14 m
13 m 13 m
12 m 12 m 40°
40°
11 m 11 m
10 m 10 m
30°
3000 kg
9m 30° 9m 4000 kg
8m 8m
2000 kg
7m 7m 20°
1000 kg
6m 20° 6m
2700 kg
1500 kg
5m 5m
1000 kg
3700 kg
500 kg
250 kg
4m 4m 10°
500 kg
2000 kg
3m 10° 4000 kg 3m
2m 2m
1m 1m
0° 0°
0m 0m
600 mm 600 mm
-1 m -1 m
13 m 12 m 11 m 10 m 9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m 13 m 12 m 11 m 10 m 9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m
IMPORTANT
Rated lift capacities shown are with machine DO NOT exceed rated lift capacity loads, as unstable This machine meets or exceeds AS1418.19-2007
equipped with carriage and pallet forks. The machine and dangerous machine conditions will result. as originally manufactured for intended
must be level on a firm surface with undamaged, applications. When utilising a suspended load,
DO NOT tip the machine forward to determine the
properly inflated tyres. Machine specifications and the JLG Load Management Indicator System
allowable load.
stability are based on rated lift capacities at specific (LMIS) must be installed in order to remain
boom angles and boom lengths. (If specifications Due to continuous product improvements, machine compliant with AS1418.19-2007.
are critical, the proposed application should be specifications and/or equipment changes may be
discussed with your dealer.) made without prior notification.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ6148 (08-2010)
© 2010 Caterpillar
All rights reserved.
Printed in U.S.A
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Cat ®
TH514
Telehandler
Specifications
Engine Hydraulic System
®
Model Cat C4.4 DITAAC Maximum System Pressure 250 bar
Gross Power 74.5 kW/101 hp Maximum Pump Flow 150 litre/min
Maximum Torque 410 Nm/1400 rpm Pump Type Variable displacement
Bore 105 mm load sensing axial
piston pump
Stroke 127 mm
Auxiliary Hydraulic Supply
Displacement 4.4 litre
Intermittent 80 litre/min
Weights Continuous 60 litre/min
Operating Weight with Carriage & Forks 11 000 kg Transmission Speeds
Operating Specifications Forward
Rated Load Capacity 1 7 km/h
On Tyres 4600 kg 2 12 km/h
On Stabilizers 5000 kg 3 21 km/h
Maximum Lift Height 4 32 km/h
Stabilizers Up 13 380 mm Reverse
Stabilizers Down 14 000 mm 1 7 km/h
Maximum Forward Reach 9225 mm 2 12 km/h
Top Travel Speed 32 km/h 3 21 km/h
Load at Max Height Boom Performance
Stabilizers Up 1800 kg
Boom Up 17.0 Seconds
Stabilizers Down 2000 kg
Boom Down 10.0 Seconds
Load at Max Reach
Tele In 20.0 Seconds
Stabilizers Up 500 kg
Tele Out 17.5 Seconds
Stabilizers Down 1200 kg
Crowd Forward (dump) 4.0 Seconds
Outside Turning Radius Over Tyres 3920 mm
Crowd Backward 3.0 Seconds
Outside Turning Radius Over Forks 5570 mm
Combined
Drawbar Pull 74.5 kW 88,0 kN
Up and Out 28.0 Seconds
Service Refill Capacities Down and In 19.0 Seconds
Fuel Tank 150 litre Bucket Breakout Force to ISO 8313 95 kN
Hydraulic Tank 90 litre Boom Breakout Force 63 kN
Tyres Sound
Standard 14.00-24 TG-02 Operator Sound 78 dB(A)
Exterior Sound (74.5 kW Engine) 106 dB(A)
Brakes
Service Brakes Servo assisted on front axle
Parking Brakes Mechanical on front axle
Courtesy of Crane.Market
TH514 Telehandler
Dimensions
2630 mm
1979 mm
401 mm
1225 mm
3200 mm
2078 mm 5091 mm
2440 mm 6520 mm
10 m 10 m 40º
40º
9m 9m
8m 8m 30º
30º 5000 kg
7m
4000 kg
7m
4300 kg
2500 kg
1800 kg
6m 6m
3000 kg
3450 kg
20º
2600 kg
1350 kg
5m 20º 5m
1000 kg
4m 4m
2000 kg
4600 kg
1200 kg
3m 3m
10º
500 kg
10º
2m 2m
1m 1m
0º 0º
0m 0m
-1 m 600 mm -1 m
600 mm
11 m 10 m 9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m 11 m 10 m 9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m
IMPORTANT
Rated lift capacities shown are with machine DO NOT exceed rated lift capacity loads, as unstable This machine meets or exceeds AS1418.19-2007
equipped with standard carriage and pallet forks. and dangerous machine conditions will result. as originally manufactured for intended
When lifting a load, the machine requires a firm applications. When utilising a suspended
DO NOT tip the machine forward
surface with undamaged, properly inflated tyres. load, the JLG Load Management Indicator
to determine the allowable load.
Machine specifications and stability are based System (LMIS) must be installed in order
on rated lift capacities at specific boom angles Due to continuous product improvements, to remain compliant with AS1418.19-2007.
and boom lengths. (If specifications are critical, machine specifications and/or equipment
the proposed application should be discussed changes may be made without prior notification.
with your dealer.)
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Courtesy of Crane.Market
Powered by TCPDF (www.tcpdf.org)