Professional Documents
Culture Documents
Wave In Computability
IN THIS ISSUE
Wave In Computability
available via a 24bit RGB TTL con-
nector or a DVI port, and a four
4 Commentary
wire touch screen controller and
audio codec interface are also pro-
6 NewsLine
vided, together with 10/100 Ether-
DELIVERING a significant ad- and easy setting up. A REsolution net, quad USB 2.0 hosting, a USB
14 Feature:
based computability is Blue Chip bles and interface electronics to camera interface are also provided.
16 Feature:
around the embedded Arm Cortex Linux, QNX and VxWorks. A versa-
A8 with the Omap 3 processing tile expansion port accepts an op-
core. It also integrates a C64x, up
to 520MHz, DSP.
tional CM1 module to add GPRS
and GPS functionality for telemat-
Embedded World
This architecture, says the
company, gives the RE2 the edge
ics and in-vehicle applications.
RE2 operates over -40~+85˚C at
20 Active Components
in performance per Watt. The
compact design is optimised for
600MHz and via the expansion
port, OEMs and developers can
24 Cables & Connection
graphics and computer intense
tasks, with target applications
quire-
ments for an off the
add their own application specific
functions with full technical sup-
28 Power
34 Test & Measurement
For full editorial
ranging from HD multimedia, shelf, 3.5~7in range of TFT pan- port from Blue Chip Technology.
image and voice processing to els. REsolution also includes a PC
data compression and decompres- utility for fine tuning display reso-
38 Passive Components
Eight Channel
sion. This board is tiny and with a lution and other parameters to ac-
low power demand, handhelds and commodate most available TFTs.
41 Comms, Computing
Mux Is Up To & Control
mobile applications will clamour RE2 measures up at 70x100mm,
Military Standard
for its services. and with four corner mounting, ac-
46 Distribution Focus
RE2’s graphics capability cluding vehicle installations. Fea-
smoothly delivers 720p resolution tures include soldered-in 256MB
48 Tech Videos
video content. Performance is LPDDR SDRAM and 512MB NAND
also complemented by versatility Flash, with an optional NAND
Editor:
leading alternative MEMS gyros. DG408, eight channel, single
Copy Editor:
to other MEMS gyros that con- manufacture analogue switches
Raj Joshi
sume as much as 60mA.” and multiplexers screened to Mil-
PRF-38535, the standard that es-
editor@electronicspecifier.com
For ultra-wide measurement ap-
plications, ADXRS649 boasts the tablishes performance, quality,
Publisher:
highest rate of rotation sensing and reliability requirements for
Tim Anstee
available at ±20,000°/s, with 3m ICs used in military and critical
avionic applications.
tim@electronicspecifier.com
start-up for quick power cycling.
DG408 switches are designed
Tel: +44 (0) 1732 366 624
THREE new, high performance, Measurement range is extendable
to connect one of eight inputs to
Fax: +44 (0) 1732 366 052
low power iMEMS gyroscopes to ±50,000°/s with the addition of
from Analog Devices feature an external resistor. a common output determined by
Publishing Director:
analogue output specifically for an- ADXRS646 has a measurement a 3bit binary address. They are
Steve Regnier
gular rate, rotational sensing in range of ±250°/s, 1kHz bandwidth optimised for high speed data
acquisition, audio signal routing,
steve@electronicspecifier.com
harsh environments. ADXRS642, and 8°/hr drift with low broadband
and battery powered and remote
Tel: +44 (0) 1732 366 617
646 and 649 incorporate ADI’s ad- noise. It has an exceptionally low g
instrumentation.
Fax: +44 (0) 1732 366 052
vanced, differential quad-sensor sensitivity of 0.015°/s/g and vibra-
technology, rejecting linear accel- tion rectification of 0.0001°/s/g² for The 44V maximum supply de-
Subscriptions
eration and vibration influences high performance heading meas- vice features a low on resistance of
Subscribe to the Digital Edition
whilst providing exceptionally ac- urement and platform stabilisation. 100Ω and low charge injection of
20pC. DG408's enable pin allows
of ElectronicSpecifier
curate and reliable rate sensing ADXRS642 is also rated at
even in the face of severe shock ±250°/s and brings improved vi- multiple devices to be used to-
Distribution Blog
and vibration. bration and shock immunity per- gether to increase the number of
Find out what’s happening
For full editorial
“These new MEMS gyros have formance to existing ADI iMEMS input signals in an application
Datasheet Download
in the world of distribution
For full editorial
linear acceleration sensitivities as gyroscope applications.
low as 0.015°/sec/g,” explains
www.futurehorizons.com
There’s strong demand too for mobile, server and graphics DRAM. cialty DRAM and graphic memory.
“We estimate that the worldwide growth rate for PCs in 2011 will be a
L a s e r s Under The Spotlight A practical talk, Photovoltaics & Lasers at 10am on May 24, is primarily
devoted to photovoltaic manufacturing, with speakers Dr Ulrich Hefter
Laser World of Photonics 2011 opens its doors from Rofin Sinar and Arnold Gillner from the Fraunhofer Institute for Laser
in Munich next month, from May 23 to 26, to em- Technology. Energy & Lightweight Construction: Laser Enables Produc-
phasise the key role of optical technologies in cop- tivity & Quality, starts at 2pm on May 23, with speakers Dipl-Ing Rüdiger
ing with social and ecological challenge. Lasers and Daub from the Institute for Machine Tools & Industrial Management at
laser systems for production engineering, green Munich’s Technical University and Dipl-Ing Florian Albert from Bay-
photonics and bio-photonics, and life sciences erisches Laserzentrum, Erlangen.
comprise the trade fair, with the World of Photonics More show and congress information and registration at www.world-of-
Specifier Specified!
In future, laser technology will enable increasing
numbers of processes in more efficient and precise
photovoltaic module manufacturing. Production
processes such as edge coating removal on solar Spotted the slight change to Elec-
modules are now standard in laser technology. And tronic Specifier magazine this
processes such as solar module soldering and weld- issue? We are now retitled Elec-
ing, and solar cell edge insulation using ultra-short tronic Specifier Product magazine,
pulsed lasers are already the norm. You can see so- with no other change to content or
lutions in these areas at Laser World of Photonics format. And the reason? We
from the likes of 3D-Micromac, Chemnitz, InnoLas launched a new electronics maga-
Systems, Krailing, LIMO Lissotschenko Mikrooptik, zine earlier this month!
Dortmund, Newport Spectra-Physics, Darmstadt, Electronic Specifier Design is the
Schott, Mainz and more. new feature magazine for electron-
Nanosecond laser pulsing is now widely used but ics engineers and designers, a sis-
is not suitable where it is likely to cause overheat- ter publication to Electronic Speci-
ing mproblems, even with its short pulsing fre- fier Product. It too is being
quency. Picosecond and femtosecond lasers are published electronically monthly
thus coming to the fore and with its ‘cold’ material and is freely available to electronics
processing, it will move on to develop so called pat- designers and engineers who can
terning of highly sensitive CI(G)S modules incorpo- register at http://www.electronic- Electronic Specifier Product, re-
rating copper, indium, gallium and selenium. specifier.com/register.asp. mains intent on keeping electronics
“We’ve launched this electronic designers and engineers up to date
Photovoltaics manufacturing magazine in the Specifier stable to with the latest in electronic prod-
The World of Photonics Congress, taking place provide electronics designers and ucts and technology development.
from May 22 to 26, accompanies the trade fair with engineers with another valuable re- Watch out too for new microsites
scientific contribution and practical talks on the lat- source for more in-depth subject now being launched, with all in all,
est applications. Its programme includes confer- areas and topics within the dy- the Electronic Specifier brand pro-
ences and events on material processing: the namic electronics marketplace,” viding a wealth of information for
Agreement Spurs Low Power MCU Drives Next Dual Core Low
ALIVH Multilayer Generation Smart Water Meter Powers Galaxy
Board Development S II Smartphone
Panasonic is to license its ALIVH, Energy Micro's EFM32 Gecko work infrastructure, the A200 also Samsung’s Exynos 4210, 1GHz,
Any Layer Interstitial Via Hole, microcontroller is integrated into has the in-built flexibility to dual core application processor, ini-
multilayer resin board technology Aquiba’s ground- enable it to be rapidly tially called Orion, is to power Sam-
to AT&S in an agreement whereby breaking A200 adapted to meet future sung’s Galaxy S II smartphone. De-
the two companies will also build smart water metering requirements. signed specifically to meet the high
up collaborative relationships with meter. Cho- “In designing performance and low power needs
an eye to developing next genera- sen for its the A200,” of advanced mobile applications,
tion circuit board technology to ac- ultra-low says Sen- Exynos 4210 allows device manu-
celerate business expansion in mo- power per- tec CEO facturers to develop products that
bile devices such as smartphones. formance, pro- Mark Eng- offer consumers the richest com-
The global mobile phone market cessing capa- land, “future- puting experience while on the go.
is shifting dramatically to smart- bility and proofing was a “We are excited that our new
phones from regular mobile phones peripheral set, key consideration and dual core processor is at the heart
and the introduction of LTE com- FM32G890F128 choosing the right micro- of one of the most exciting new
munication services and the anti- handles the controller for the job was generation smartphones,” com-
cipated fully fledged spread of A200's high ac- vital. We needed to move to ments Dojun Rhee, Samsung’s
e-books are expected to spur mar- curacy flow meas- a microcontroller that could Marketing VP. “Exynos 4210 deliv-
ket growth. High density and mul- urement, data log- give us the 32bit data processing ers the true value and benefits of
tilayer circuit boards play a key role ging, secure but at a power consumption that dual core processing. Powerful per-
in smartphones which require high communication and applica- would deliver a battery life of 15 formance, excellent graphics re-
speed processing of ever more in- tion firmware upgrades. years. What's more, it needed to production and maximised power
creasing amount of signals. Providing a complete plat- be able to support our unique oper- efficiency are key differentiating
Panasonic's ALIVH technology form for intelligent water networks, ating system and modular software features Exynos 4210 brings to the
enables an IVH structure in all lay- Aquiba A200 is said to outperform and handle over the air field up- Samsung Galaxy S II.”
ers to make PCBs suitable for high traditional mechanical meters: it grades as well. The Energy Micro Exynos's 4210 dual core archi-
density and multilayer applications. has no moving parts and boasts part gave us the performance we tecture, five fold graphics perform-
The company places high priority world class metrology, ensuring needed on all counts and with its ance enhancement and wide
on ALIVH products that are essen- high accuracy measurement even Cortex- M3 core, provides a stable, memory bandwidth enable it to
tial for the further evolution of so- at the lowest flow rates and over non-proprietary architecture that address consumer demand for life-
phisticated mobile terminals, such the product's full service lifespan. opens the way for further next gen- like multimedia content delivery
Design System
Public Key Powers Into Chip
Hardware Solution Synthesis
Is Enhanced Latest version of the Oasys De-
Barco Silex has an enhanced sign Systems chip synthesis
version of its Public Key Hard- platform has enhanced capabilities
ware Accelerator. And BA414E is including chip level power analysis
I n t era ct i ve D i s p la ys I n t egr at e
Applying technology used carrier available in Q2 2011. NFC brings
networks worldwide, the companies the wallet inside the phone and al-
To u c h S e n s o r I n n o v a t i o n
are delivering a platform capable of lows secure transactions such as
achieving macro-class performance payment, transportation and phys-
in a pico-class form factor for small ical access.
cell deployments. NFC enabled phones with se-
The platform consists of TI’s Zytronic has announced ongoing sensors’ resilience to harsh envi- cure elements provide consumers
TCI6616 SoC for PHY and Layer 2 collaboration with Mentor Dis- ronmental conditions such as high with a wide range of applications
processing, enabling OEMs to de- tribution, continuing to add to the humidity, water ingress and expo- that enhance user convenience
velop advanced base station solu- expansive network of commercial sure to shock or vibration, and their and security. The advantage of
tions for all air interfaces from GSM partners making use of its propri- ability to offer continued accurate NFC is that it is a versatile and
to LTE. The C6A8167 Integra etary Projected Capacitive Tech- and responsive drift-free operation market proven technology. It offers
DSP+Arm processor provides Layer nology touch sensors and accom- without concerns about having to consumers a range of applications
3 processing and the GC5330 Tx/Rx panying touch controllers. carry out costly maintenance or re- from secure payment on the go to
processor delivers digital radio front Mentor specialises in large format calibration activities. mobile transactions and conven-
Imaging To
designed allowing them to be embedded into a durable, lami-
Advance Medical
sourced rapidly, with a broad array nated glass substrate. With the
of options available so customers sensing elements mounted behind Etisalat and Huawei have joined
Diagnoses
can specify the best match for their the front surface, the screens oper- forces in a commercial LTE con-
specific requirements. ation are unaffected by scratches, tract to commence deployment of
Steatite Opens Up
3D professional graphics technology Acting CEO of Etisalat UAE and
in its MXRT Series display controller mate, Steatite has continued to Yi Xiang, President for Huawei
New Facility As
products for demanding medical grow from strength to strength re- Middle East, witnessed the sign-
Growth Continues
imaging applications. ATI FirePro sulting in the need to expand pro- ing ceremony in Barcelona.
with AMD Eyefinity multi-display duction capabilities. The advanced LTE technology,
technology, provides increased vi- Last December, Steatite won a which has already been tested and
sual quality for users across a broad Steatite has opened a new self £100,000+ contract to supply in- deployed on the Etisalat network,
range of healthcare disciplines in- contained, purpose built facility at dustrial computers to the new BBC enables the existing network to
cluding radiology, clinical review the Ravensbank Business Park in site in Manchester for control appli- reach a download speed of 173
imaging, surgery and mammogra- Redditch, Worcestershire. Sajid cations using Steatite’s own 1U, Mbps. LTE can accommodate mul-
phy, allowing clinicians to make Javid, MP for Bromsgrove and lower power computers with a cus- timedia applications such as video
more informed medical diagnoses. Karen Lumley, MP for Redditch tom operating system. Further to conferencing, HD content trans-
“AMD and Barco are working to- County, unveiled a plaque to mark that, the company secured another mission, high speed video down-
gether to further medical imaging the relocation, a prime spot only major contract worth over £250,000 loads and social networks, giving
technologies,” says Janet Matsuda, four miles from the M42, making with Enterprise, the UK dedicated Etisalat's customers unbeatable
AMD’s General Manager. “Barco is Steatite accessible to all its cus- provider of maintenance and front- mobile broadband.
a medical imaging leader with a tomers nationwide. line services to the public sector “Etisalat has established a repu-
solid track record of delivering the Despite the current financial cli- and utility industry. tation as a telecom service provider
right graphic solutions for this mar- During 2010, Steatite’s profits that is continuously innovating and
ket. Medical customers are already in the first half of the year rose identifying new ways for providing
using three or four monitors to by 48% with sales increasing customers with unparalleled tele-
view imaging data, and the AMD by 22% compared to the same communication experience, touch-
Eyefinity multi-display technology period last year. This result. it ing every sphere of their lives,” says
and ATI FirePro professional says, reflects the growth of Nasser bin Obood. “Maintaining
graphics enable clinicians to offer new product development, key our leadership in the wireless
the highest possible level of patient target market penetration and a broadband market, we are proud to
care while holding computer hard- strategy of focus on its key cus- be the Middle East's first and
Authentication
X-47B First Flight Is With VxWorks
and programming services, as well
Delivers Smart
as the option for remote manage-
X-47B, the tailless, strike fighter sized unmanned system under de-
Card Security
ment of applications and creden-
tials running on the secure MCU.
velopment by Northrop Grumman, completed its first flight at Edwards “Counterfeit electronic devices
Air Force Base in California. The flying wing took off at 2:09pm and Au10tic secure ICs from NXP are present a very real challenge to tag-
flew for 29 minutes, climbing to an altitude of 5000ft and completing designed specifically for device au- ging and authentication product
several racetrack type patterns before landing safely at 2:38pm. thentication. These MCUs are lines,” says NXP’s Chris Feige, “par-
Northrop says the flight provided test data to verify and validate sys- based on NXP's security technol- ticularly as smartphones, tablets, e-
tem software for guidance and navigation, and the aerodynamic con- ogy, widely used for securing gov- book readers and other mobile com-
trol of the tailless design. ernment ID cards and passports, as puting devices become ubiquitous.
The aircraft will remain at Edwards AFB for flight envelope expan- well as smart cards for banking and With au10tic, we’re bringing a new
sion before moving its test programme to Patuxent River Naval Air other high security applications. level of security to device authenti-
Station later this year. There, the system will undergo tests to validate Providing easy integration into cation. It’s an entirely new portfolio
its readiness to begin testing in the maritime and carrier environment. end devices, au10tic ICs provide a of authentication chips built on our
Zoran is to merge with CSR in a 2010, Zoran had total pro forma rev-
deal worth around US$679 million. enues of $441 million.
Zoran shareholders get 1.85 ordinary The merged company will provide
CSR shares as American Depositary differentiated, integrated technology
Shares for each share of Zoran com- that addresses the rapidly growing
mon stock held. In addition, CSR in- market for connected, location
tends to return up to US$240 million aware multimedia devices including
to shareholders via an on-market handsets, digital cameras and home
share buy back programme. entertainment equipment. Combin-
CSR is a global leader in wireless ing the two highly complementary
connectivity and location. Zoran technology portfolios positions the
provides market-leading imaging merged company to deliver ad-
and video technology for digital vanced platforms to capture and
Manufacturers of
RFI/EMI gaskets, More Performance... Aries’ ultra high
frequency sockets have a mere 1 dB
components & signal loss at up to 40 GHz!!! Centre probe
and Microstrip sockets deliver more than
Environmental half a million insertions with no loss of
electrical performance.
seals. More Choices... Aries offers a full range of
sockets for handler-use, manual test and
burn-in...for virtually every device type,
including the highest density BGA and CSP
ISO 9001
Certified
packages. Choice of moulded or machined sockets
for centre probe and Kapton interposer models, too!
Over 30 years experience Less Cost... in addition to extremely competitive
in providing solutions to initial cost, Aries replacement parts and repair NOW AVAILAB
for
LE
ICs Down
emc and environmental costs beat the competition, assuring you of to 0.3mm Pitch!
lowest total cost of ownership.
sealing issues.
Less Wait... Aries can deliver the exact sockets
you need in four weeks or less!
Core Is World's
Vocality Takes Green Hills Route
ucts provide radio relay, secure
Highest Performer
To Secure Satellite Voice Comms
voice, network routing and IP secu-
Collaboration Will
cally optimised for the low power
LTE base stations and terminals. such configurations was to actually and small area requirements of LTE
Simplify Processor
The benchmarks will be embodied implement an LTE standard com- Advanced handsets. These two
Evaluation
in the form of reference code that pliant solution on the processor. new products are based on the new
can be implemented on any pro- And even after doing so, it has ConnX BBE64 architecture which
grammable hardware platform, al- been impossible to make fair com- can be used to optimise a DSP core
mimoOn is joining forces with lowing benchmark data to be pro- parisons between processors be- for particular requirements.
BDTI to develop benchmarks for duced across a diverse range of cause of differences in the LTE “Tensilica has gained dominant
the evaluation of processors used architectures. functionality implemented on each market share in LTE by offering the
in LTE baseband applications. The LTE standard allows a wide processor. Similarly, it has been dif- broadest line of signal processing
With demand growing for software range of configurations for base sta- ficult to make fair comparisons of IP core options for LTE from micro
and silicon solutions for LTE, so tions, from a low bandwidth, single processors for LTE terminals in DSPs to the ConnX BBE16,” states
also is the demand for benchmark- antenna configuration supporting a terms of cost and power consump- Eric Dewannain, Tensilica's VP &
ing data to enable reliable compar- few users and low data rates up to tion. The new benchmark under General Manager. “Now we are
isons between competing hard- configurations supporting 20MHz development by BDTI and mimoOn taking leadership with the world's
ware platforms. bandwidth, more than eight anten- overcomes these difficulties by pro- fastest DSP IP core targeted for the
BDTI and mimoOn are collabo- nas and data rates of 300Mbps or viding a uniform workload incorpo- upcoming LTE Advanced commu-
rating to create a benchmark suite thousands of users in a cell. rating the key elements of LTE nications standard. Since all of our
Enables Larger,
Suites empower design engineers
Scanworks First Up
typing with the Kinetis micro- ule provides a large area where
Throughput
ics. It includes hardware boards, by the IAR J-Link Lite for Cortex-
debugging probe, software tools M debugging probe, also in-
ScanWorks for embedded instru- and code examples. cluded in the kit, allowing SWO
ments from Asset InterTech is As part of the Tower System, debugging including SWO trace "The Intel Q67 Express chipset al-
the first validation and test plat- this kit comes with the Kinetis for execution time analysis and lows quicker packet throughput
form to support Intel's new second K60 MCU module with on-board visualisation of variables and in- while using less energy," enthuses,
Prriis
smmX XGGU UI
Coventor and the nano-electronics targeting imec’s SiGe MEMS tech-
To o l k it R i s es
research centre imec, in a strategic nology that uses a MEMS last ap-
partnership, are out to improve and proach, where the MEMS are
To S STTMM3 2
expand the use of advanced design processed after and on top of the
and manufacturing techniques for CMOS circuits for a monolithic in-
Plla
attfo rm
CMOS integrated MEMS develop- tegration of MEMS devices with
m
ment. The pair will strategically the driving and readout electronics
align their R&D roadmaps and col- on the same die.
laborate on advanced research top- The SiGe MEMS platform’s flexi-
ics, with teams expanding imec's ble and modular approach also al-
use of Coventor's software tools lows application-specific tuning
suite for MEMS + IC design. The and optimisation of MEMS layer
two will also jointly develop process thicknesses and properties, and the
design kits for imec's SiGe MEMS processing of optional functional
above IC process. layers on top of the MEMS devices.
Building on MEMS design and The partnership takes advantage
manufacturing success from both of Coventor’s background in devel- PrismX, the new graphics toolkit for PrismX represents a ThreadX
organisations, the partnership will oping infrastructure for MEMS de- STMicroelectronics STM32 RTOS integrated port of Blue Water
develop solutions to make MEMS sign environments with its design processors from Express Logic and Embedded's Prism, marketed and
more accessible to MEMS and IC tools production proven on hun- Blue Water Embedded is a complete supported by Express Logic. Incor-
designers. Process design kits will dreds of MEMS designs over the GUI software development solution porating advancedGUI development
Memory Controller
STM32. It boasts eye-catching work, GUI toolkit, PrismX Micro, a
between area and performance. graphical capabilities and time to GUI toolkit for monochrome to 8bit
Lowers Latency
The memory controller also pro- market edge for medical, industrial, colour depth targets, and PrismX In-
Up To 30%
vides a DFI 2.1 compliant interface office automation and consumer sight, a desktop GUI design and re-
Module Speeds
Synopsys’s enhanced Design- 2133Mbps and supporting DDR3,
Ware Universal DDR memory con- DDR2, LPDDR and LPDDR2 ance characteristics and automati-
Complex Systems
troller delivers up to 30% lower la- SDRAM. cally verify design constraints.
Design Exploration
tency with up to 15% higher “As the leading supplier of SoCs ParaSolver connects SysML with
throughput than the previous gen- for femtocells and small cell base solvers like Mathematica and
eration controller. It features high stations,” says Picochip VP Will OpenModelica. Equations used for
priority by-pass and configurable Robbins, “we rely on Synopsys, a Atego’s Artisan Studio ParaSolver computing measures of effective-
look-ahead. trusted IP vendor, to provide us is heralded as an invaluable new ness are represented as constraint
The high priority by-pass en- with a high quality DDR IP solution add-on module for its Artisan Studio blocks while SysML parametric di-
ables designers to improve latency, that further helps us differentiate standards based, model driven, de- agrams graphically connect with
by-passing the scheduling algo- our products in the market. Synop- velopment tool suite. It speeds up system properties using these
rithm for immediate access to the sys's continued advancements in the whole process of exploring com- equations. Complex systems can
DRAM. Configurable 'look ahead' DDR IP allow us to reliably develop plex SysML design alternatives be decomposed in Artisan Studio
provides intelligent scheduling to high performance memory systems through the execution of SysML using SysML blocks and parts and
maximise throughput by prioritis- that are optimised for both parametric models, enabling opti- non-functional requirements re-
Reference Design
with the Freescale MQX operating system, for Kinetis and other
PHY. In addition, mimoOn's exten-
Base Stations
with TI's latest 4G SoC will enable
the high performing LTE solutions
for small cell base stations.
mimoOn is joining forces with According to mimoOn CEO
Texas Instruments for its new Thomas Kaiser, “2011 will see
TMS320CC66x DSP family for LTE deployment increasing.
emerging small cell base stations. The market is demanding a fully
The two companies will work to- integrated SoC with LTE soft-
gether to provide a complete PHY ware that enables faster time to
reference design for LTE Release 8 market, in combination with effi-
with extensions to Release 10. cient reuse of software. mimoOn
Users will benefit from faster time and TI collaboration enables po-
to market where integrating, opti- tential customers to take delivery
mising and supporting LTE software of a complete software and hard-
LED Wallpack
significantly reduces space require- 1.33W and all the LEDs are speci- LEDs, which are an expansion of
Joins SafeSite
industry’s thinnest 1W white LEDs.
System Streamlines
designed for use on standard
printed circuit boards. ORCA
Modules Speed
fixtures are designed to replace new components and dis-
conventional HID, incandescent ciplines of SSL systems
LED Lighting
and fluorescent fixtures. into one simple, coherent
Take-Up
Available in a variety of colour packaged solution that pro-
temperatures, including cool, vides application flexibility
neutral or warm white, these new and exceptional product perform- and temperature monitoring. A
Wallpack fixtures also optionally ance. In addition, this product of- new ribbon based, four wire con- Cree LMR2 LED modules are
deliver wide or oval optical distri- fering provides lighting fixture figuration wiring system is physi- compact, highly efficient and pro-
bution. Specifically designed for manufacturers with a five year cally keyed and colour coded for vide a simple solution for lighting
easy retrofit to existing wiring, system warranty. polarity, accurate power connec- designers and manufacturers
the fixture is ideal for use in stair- Nevalo includes over 60 LED tions and ease of manufacturing. seeking best in class LED lighting.
wells, platforms, exits, walkways, light module options, ranging Other components included in And previously released LMR4
building exteriors, tunnels and from 300~3400 lumens, in form the system are heat sinks LED modules are now available in
other confined or hard to access factors for popular lighting appli- matched to the LLMs to help pro- four colour points of 2700K, 3000K,
spaces and is available in light cations. There are also optics in vide appropriate thermal manage- 3500K and 4000K, each based on
grey, black or white finish to total internal reflection and reflec- ment and life expectancy, and cir- Cree’s TrueWhite technology.
Datasheet Download
current output, dimming controls technology for efficient, high
Infrared Emitter
Bright Lights
semiconductor is emitted through
Intensity Bright XLamp XP-G LEDs from Cree deliver up to 493 lumens at 92
greatly reduces side emissions out
of the device's 5mm T1¾
plastic package, provid- lumens/W when driven at 1.5 A. These LEDs boast setting a new stan-
Vishay’s new 850nm infrared ing a narrow, well di- dard for light output and effectiveness in single die LEDs.
emitter features a parabolic lens for rected emitted beam with-
a very narrow ±3º angle of half in- out disturbing fractions
tensity. Based on surface emitter towards the sides.
chip technology, VSLY5850 prom- High radiant intensity enables
ises enormous radiant intensity significant intensities at low drive
of 600mW/sr at a 100mA drive, currents, reducing power consump-
optical power up to 55mW and tion up to three times compared to
fast 10ns switching times. next available intensity class IR
VSLY5850 surface emit- emitters. It also extends operating
Datasheet Download
die construction whereby
all the light generated inside the
Source Is Easy
of 1310nm and 1550nm and uses
To Use
an FP-LD emitter. Maximum
spectral width is 10nm and
paired together with the
GAO Fiber Optics 5301 mini optical power
has a rugged, easy to meter, it forms a small op-
Surface Mount
Everlight so to give its customers ing the original materials, produc-
the company, to ensure on-going eco LED products, the company is tion process and testing.
LEDs Tested
reliability and performance. As part taking the lead with the world's first LED is a well known eco light
To Extreme
of the testing regime, the LEDs are third party verified carbon footprint source but every manufacturer has
exposed to extreme heat, humidity declaration of LED products by cer- its own way of declaring environ-
and high levels of sulphur gas. tification organisation SGS. This fol- mental protection. Everlight adopted
SignalSure mid-power surface Philips Lumileds simulates high lows the PAS 2050:2008 standard this international third party verifica-
mounting LEDs from Philips Lu- voltage jump start and high voltage verification from UKAS following tion to create a reliable carbon foot-
mileds for automotive signalling alternator failure to ensure that the declaration launch in late 2010. print declaration of LED products for
are intended to be the most robust LEDs continue to operate without PAS 2050:2008 is important as a its customers, says the company,
and reliable available, undergoing degradation in performance, qual- basis for the forthcoming and it would like to take the lead and
rigorous multi-environment over- ity and light output. ISO14067-1/-2 which specifies as- encourage all the LED industry to
stress testing that exceeds that re- “Reliability and confidence in a sessment of the life cycle green- work harder in protecting the envi-
Laser Sensor
red-orange and amber for automo- SignalSure from the start,” explains
tive specifications. Paul Martin, Philips Lumileds Sen-
Ramp Up Power
beyond datasheet maxima, says
Handling Capacity
quality light for a variety of appli- ment. Fixture manufacturers also
cations where high CRI and effi- have the option to include a spe-
cacy are required. Its 2.25in aper- cially designed heat sink to ac-
ture allows increased design commodate high heat applica- Ophir Photonics Group has a
flexibility for applications includ- tions, such as downlights. new line of high damage thresh-
ing pendant lighting, sconces, “The LMR series of LED mod- old power volume absorbers for
wall washers, as well as small ules continues Cree’s long history <1µs short pulsed lasers. PF sen-
aperture downlights. of innovation in LEDs for lighting sors absorb laser energy in the
Designed to last at least applications,” comments Cree’s volume of the material used,
35,000hr and dimmable to 5%, Scott Schwab. “We are extending making use of a spray deposited
LMR2 delivers 650 lumens at our portfolio of application opti- on the surface rather than typi-
colour temperatures of 2700, 3000, mised LED modules which are de- cally glass or ceramic substrates.
3500 and 4000K with a 90 CRI. It is signed to help OEM customers These sensors boast signifi-
drop-in ready and provides a com- quickly and simply design, and cantly higher power handling ca-
prehensive solution with inte- bring to market, fixtures based on pacity and faster response times,
67560@756B<3AA
67560@756B<3AA
:32a4=@27A>:/G/<2A75</
:32a4=@27A>:/G/<2A75</534@=;1@33
:32a4=@27A>:/G/<2A75</534@=;1@33
CCree
ree LEDs ar
aree rrevolutionizing
evolutionizing lighting. Our full line of RGB and white
lighting. white high-brightness LEDs deliv
high-brightness er high-
deliver
performance at
performance at an economical
economical price.
price. Cree
Cree can help you
you bring energy-efficient
energy-efficient LED light
light to
to video screens,
screens,
displa
displayy and informational
informational signage,
signage, channel lighting,
lighting, ligh
lightt strips
strips and architectural
architectural lighting worldwide.
lighting worldwide.
LEAD-FREE
RoHS-COMPLIANT 1]\bOQbO\OcbV]`WhSRRWab`WPcb]`ObeeeQ`SSQ][VP
1]\bOQbO\OcbV]`WhSRRWab`WPcb]`ObeeeQ`SSQ][VP
]`QOZZ&#!!
]`QOZZ&#!! #&!
This part is tested
* This tested under the ccondition
ondition of assembling it on a PCB and isolating
assembling isolating the electrical path
electrical path bbyy silicone.
silicone.
Cree, the CCree
Cree, ree logo,
logo, and Screen
Screen Mas ter are
Master are registered
registered trademarks,
trademarks, and Lighting
Lighting the LED Revolution
Revolution and the
Lighting
Ligh ting the LED Revolution aree trademarks
Revolution logo ar trademarks of Cree, wholly-owned
Cree, Inc. or a wholly -owned subsidiary of Cree.Cree.
FEATURE: EMBEDDED WORLD
Connectors Pitch
in native language. Its Mouser-
Mobile site and Mouser.com
In 5A Operation
website operate under 16 lan-
guages and 16 currencies. Each
is updated daily and Mouser.com
searches nearly 8million products New wire to board connectors from
to locate over 1.8million orderable W+P Products include Mini Power
part numbers available for easy versions that combine the ability to
7PJ
DF
.VM
UJ
5S
BOTDPEFS
*$
8PS
ME
-FBEJ
OH
4JOHM
F$IJ
Q4PM
VUJ
PO
Analogue
www.cmlmicro.com/CMX7261.asp
A CML Microsystems Plc Company
Power Modules
Drive High Output Ch i p So u n d s O u t
Voltage Apps Hi g h Q ua l i ty
New Simple Switcher power mod-
M in iatu ris ed
Au dio
ules from National Semiconduc-
tor are heralded as the first to drive
high output voltage applications in
a variety of markets including in-
O p Amps E xt e nd
dustrial, communications infra-
structure and military. The easy to
B a tt e ry L i fe
use LMZ14201H, LMZ14202H and
LMZ14203H devices provide the
efficiency of a synchronous switch-
ing regulator with the simplicity of Max9636~9638 rail to rail, low
a linear regulator, eliminating the noise operational amplifiers from
external inductor and complex lay- Maxim come in six pin SC70 sin-
out placement challenges typical of gle, eight pin SC70 dual and ten
switching regulator designs. pin UTQFN dual packages, min-
These devices accept an input imising board space while ramp-
voltage rail of 6~42V and deliver an ing up noise performance.
adjustable and highly accurate Connecting directly to the latest ital microphone as well as a stan- With 38nV/rt-Hz input voltage
output voltage up to 24V. A single miniature microphones and pro- dard microphone input. With tiny noise density, 50fA/rt-Hz input cur-
Single Chip
resistor adjusts the switching fre- viding a new way of boosting per- dimensions and low sensitivity to
formance from small, low cost or noise from LCDs and power com-
Controller Is
quency to enable greater flexibility
of design. even damaged speakers, the ponents, MEMS microphones are
A Nice Touch
With pin for pin compatibility STA321MP audio processing chip ideal for multi-function products
with other family members, the from STMicroelectronics en- such as smartphones.
97% efficient modules integrate a ables miniaturised audio products The STA321MP audio processor
shielded inductor to alleviate EMI with outstanding sound quality permits direct connection of a Atmel’s maXTouch E Series sin-
concerns. The modules comply to be realised. MEMS microphone, saving on gle chip capacitive controller is for
Datasheet Download
and conducted emissions stan- minal audio IC family and features provide enhanced analogue sens-
dards, driving loads of 1~3A for in- a built-in interface for a MEMS dig- ing via a third generation ca-
D i gi t a l I nt erf a ci n g
of load without airflow.
Datasheet 1 Download
itive sensing.
Datasheet 2 Download
The series provides
Datasheet 3 Download
224~768 nodes, enabling
designers to select the in-
ADC Powers
dustry's most advanced single
chip solution for their touch-
New Levels Of
screen size and application.
Performance
With system noise the great-
est challenge to touchscreen
performance, all devices in the
New high speed, 8bit ADCs from maXTouch E Series boast en-
Analog Devices boast best in hanced analogue sensing with
class power and noise perform- improvements to maXTouch's
ance for instrumentation and noise immunity solution. These
Optocoupler
communications applications.
Both devices are pipeline archi-
Provides Reliable
tecture based and consume just
Optical Isolation
310mW of power. Expanding its range of ultra-com- require high speed data transfer
AD9284 is heralded as the in- pact IC logic couplers, Toshiba has with very low input drives. An
dustry’s first dual, 8bit, 250MSPS four new devices that address high input of just 0.5mA delivers a cur-
ADC while the AD9286 8bit speed, electrically isolated digital rent transfer ratio of at least 400% For industrial communications
500MSPS device delivers 8bit reso- interfacing in a variety of industrial, and the coupler is rated for speeds needing to transmit high speed data
lution at 40% less power than com- automation, home appliance and up to 100kbps. Common mode over the communication field bus
petitive components. measurement applications. transient immunity is ±0.5kV/µs. without damaging sensitive con-
The converters feature a high TLP2403, 2405, 2408 and 2409 IC In the case of the TLP2405 trollers, ADC or sensor current solu-
SNR of 49.3dBFS, enabling a wide photocouplers come in eight pin, logic buffer output and TLP2408 tions use two single channel opto-
dynamic signal range with a spuri- 6x5.1x2.6mm SO8 surface mounting inverter output IC couplers, the couplers or alternatives such as
ous-free dynamic range perform- packages. All devices combine a integrated detector has a totem magnetic or capacitive coupling.
ance of 65dBc. Applications range GaAlAs LED with a high speed, pole output stage with current But, says Fairchild, this just
from battery powered instruments high gain detector element and fea- sourcing and sinking capabilities. doesn’t cut the mustard in providing
to handheld scope meters and dig- ture 3750Vrms minimum isolation. Both devices can achieve data the required level of reliable isolation
Datasheet 1 Download
tocoupler: the detector chip is inte- low input threshold current of So the company developed
Chip Combination
AMD & Intel Head To Head
rent noise density and 0.1pA input
Delivers 1080p
bias current, these devices enable
Video & Graphics Accelerated web browsing on IE9 RC is the head to head challenge
interfacing to high impedance
sources such as photodiode and
piezoelectric sensors. Maxim's in this video. Check out the comparative demonstration between
BiCMOS processing and design ar- Broadcom’s new base band AMD’s E-350 (Brazos) and Intel’s Pentium P6100.
chitecture enable the devices to processor is for affordable and high
achieve an excellent combination performance smartphones. BCM
of size, low noise performance, 28150 HSPA+ integrates a Broad-
bandwidth and supply current. com Merlyn processor with Video-
Designed to operate from a Core IV mobile multimedia/graph-
2.1~5.5V supply, Max9636~9638 ics, delivering one of the highest
are ideal for sensor interfaces in performance, smallest footprint and
portable medical applications that lowest power smartphone solutions
demand low noise and low quies- for Android and other open operat-
cent current. They extend battery ing systems, says the company.
life with a quiescent current of typ- Broadcom's Merlyn applications
ically only 36µA. An optimised processor combines Arm’s Cortex
ratio of gain bandwidth to supply A9 with Broadcom's high perform-
current enables 1.5MHz band- ance low latency bus architecture
width support. The devices also and multimedia in the BCM28150,
Datasheet Download
gine for all future Broadcom base-
SMT Central
ments also allow the
Office Splitter
use of noisy, lower
cost displays and
chargers, enabling
additional system First surface mounting central of-
cost savings. fice, splitter module comes from
With en- Pulse Electronics. B89S59 NL
hanced noise is for rack card DSL access multi-
immunity, these plexers or in roadside cabinets,
devices are the in- combining or splitting separate
dustry's first to allow POTS and DSL data signals.
consumers to simultaneously use The SMT device provides im-
a 2mm passive conductive stylus proved shock and vibration re-
whilst continuing to support sistance with its shorter leads,
Datasheet Download
Encapsulated
unity gain bandwidth of 3MHz, the
Digital Module
device suits a broad range of cost-
sensitive audio products including
set-top boxes and pre-amplifiers.
Intersil’s ZL9101M encapsulated, Two versions are available: the
high integration digital DC/DC commercial grade APX4558 with
power module is designed for point an operating temperature range of
of load power management in 0~70ºC and the industrial grade,
servers, telecommunications, net- -40~105ºC APX4558I. Both come
working and storage equipment. in SO8 packaging, pin for pin
This module, following the com- compatible with industry stan-
O p A mp s R a m p Up
pany’s Power Made Simple philoso- dard op-amp alternatives.
phy, provides a building block easily These short circuit protected
A ud i o Per fo rm a n ce
adapted to varying system power devices incorporate internal com-
requirements. ZL9101M is a quick pensation for operational stability,
and easy alternative for power solu- removing the need for additional
tions up to 12A, says the company, external frequency compensation
Datasheet Download
component and complicated exter- of only 8nV/√Hz at 1kHz, the demands for higher performance
nal IC count for implementing a APX4558 dual channel op amps audio without increasing materials
Datasheet Download
programmable logic controllers, OPAx320 devices combine a an active filter in automated test
Chip Is Full Duplex Synchronous Step-Down Converter ficiency while avoiding critical
Datasheet Download
cent current and is ideal for auto-
motive or telecom system
Collaboration turing. The combined solution in- abling the production of superior,
Targets Next
cludes a Sony CXD4730GB timing high quality 3D and 2D images
Generation 3D TV
and lighting controller and Mi- using LCD panels from a wide vari-
crosemi’s LED driver comprising ety of manufacturers.
two chips: the Dazl! 2000 series The combined technologies
Collaborating with Sony’s Semi- LX24232 32 port logic chip and the enable lower cost, 60Hz refresh
conductor Business Group is Mi- LX23108L eight port LED driver LCD panels to produce the image
vides A/D and D/A conversion crosemi for the first open market, power chip. quality of more expensive 120Hz
with no additional DSP or pro- 3D capable timing controller and The complete turnkey reference panels, with 120Hz panels match-
gramming, guaranteeing quality local dimming LED backlighting design draws on Sony video and ing the image quality of costly
fciconnect.com/highspeed fciconnect.com/powersolutions
www.fciconnect.com
.fciconnect.com
CABLES & CONNECTION
Huber+Suhner
Signs Up Acal BFi
Huber+Suhner has signed up
Acal BFi to distribute and provide
specialist technical support on
Huber+Suhner‘s RF connectors,
cable and assemblies. According to
Mark Nelson, Acal’s Sales Manager,
the company already has a stock
profile of Huber+Suhner‘s most
Terminal Blocks
popular RF products and will con-
tinue to develop a wider inventory
Make Industrial
High Reliability Range
to meet growing customer demand.
Grade
Commenting on the appoint-
Is Fully Screened
ment, Huber+Suhner‘s Commer-
cial Manager Phil Stanway says,
New FCI plug and socket con- “We are naturally delighted to add
figurations available from Acal BFi to our UK distribution net-
Rutronik, are ideal for indus- work. The company enjoys a great Harwin’s Datamate S-Tek 2mm, 14, 20 and 26 pole female cable to
trial and instrumentation ap- reputation throughout the technol- high reliability connectors are now PCB mount and female cable to
plications. Included are vari- ogy sector and will complement in stock at Aerco. They are de- panel mount configurations.
ous arrangements such as our existing distribution partners. signed for applications requiring Manufactured in aluminium alloy
front screw, key backside, Customers looking to specify and high EMC levels in military, aero- and nickel plated for electrical per-
contact down plugs. Two wall, use our RF Interconnect solutions space, industrial and control equip- formance and corrosion resistance,
45°, feedthrough sockets and will benefit from the depth of ex- ment applications. S-Tek connectors are mechanically
Connector
All configurations come with fitted with a single piece, ma- dard metallic braids and provide
or without the screw locking chined metal backshell, providing cable to board and panel mount set-
Floats Out
side flange feature. The stan- full RFI and EMI screening. The S- up shielding for high end EMI and
Connectors Drive
A special ‘s’ shaped section in the market, says the company.
each contact strip provides the nec- “We have put the ultimate in
Total Panel
essary flexibility, and with a reac- Molex power and signal design
Solutions
tion force of less than 0.098N/con- into this product which meets the
tact laterally and longitudinally, the market’s demand for higher
floating mechanism is also highly wattage in smaller spaces,” says
Tablet, notebook and netbook PC compliant. Despite the small Molex Product Development
markets are creating high demand QZAC-A connector size, each con- Manager Ken Stead. “The EX- nal. An array of module options is
for high performance intercon- tact has a current capacity of 0.3A Treme Ten60Power blends power available, making the system
nects with sufficient throughput to dc and a rating of 120Vac, with- and signal contacts in a single, highly configurable; these include
drive the latest displays. Enter standing 250Vac for one minute. low profile connector housing to three different mating lengths and
Tyco with its next generation LCD Contact resistance is 90MΩ and achieve the maximum current to end, top or side mounting guide
coaxial embedded display inter- insulation resistance is 1000MΩ at space ratio.” modules, voided power positions,
face, LCEDI, connectors, providing 250Vdc. QZAC-A stacking connec- Featuring tighter pitch signal and right angled and vertical
total solutions for panel and main tors come with a stack height of contacts than the original Molex mount connectors for co-planar or
board interconnectivity. 15mm and 9x18mm footprint for the 24 signal, three row, 2.54x2.54mm vertical designs.
Two versions are available: 20pin version. version, these 25 signal, five row, “Solving the power equation on
LCEDI connectors for notebook 2x1.65mm modules are suitable new architectures and system
panels and tablet PCs and LCEDI for all board to board and wire to platforms is a major focus for our
SR connectors for system applica- board applications. product development teams,”
tions. The connector range deliv- EXTreme Ten60Power modules adds Stead. “The modular Ten60-
ers exceptional electrical perform- come in 250 or 600V versions with Power system packages all the
ance in low voltage differential a range of 1~10 power blade mod- features needed for optimal de-
signalling and embedded display- ules and 6~36 signal modules, for sign flexibility in critical space
port applications. It is licensed by a maximum of up to 60A per constrained applications where
I-Pex and fully compatible and in- blade. The robust contact design power supply and signal integrity
Optoelectronics
ects are the subject of a new ap- with sealing that could be
plications note from ITT ICS. Ex- checked on-site before operational
Connector Is
ploration costs continue to rise deployment down the well. The
Up To Standard
steeply year on year as wells have connectors had to be welded di-
to be drilled ever deeper, increas- rectly to the gauges and be no
ing demand on equipment in this larger than the gauge diameter.
challenging environment. ITT ICS’s Permanent Down
Maximising production effi- Hole Gauge Connector protects
ciency is critical for cost-effi- expensive gauges from damage
ciency and with conventional through metal clad cable sheath-
gauge connectors no longer prov- ing failure and fits wells with
ing robust enough, ITT ICS set out small casing sizes. Its replaceable
to engineer a new solution: con- metal to metal connector to cable
nectors and gauges that operate seal is field attachable and verifi-
Series Additions
Connectors Assembled To Order
1 and Patt 105 requirements.
They are also approved to IECQ-
Connect For
CECC spec BS/CECC 75201-003
Increased Power
and BS 9522 F0017.
LMH bayonet coupling Peak working voltages can
power connectors manufac- be as high as 1500V dc or ac
tured by fellow Lodge Group and an available 360ºC screen Spec Pak Extreme the latest addi-
company Weald Electronics termination option provides tion to the Anderson Power
are available from Lane full EMC protection. Free Products connector series, takes
Electronics. The company shells with grounding fingers the power handling capability of
is holding a significant stock and PCB contacts for fixed the Spec Pak series to 320A.
for immediate delivery, to- styles also form part of the This is achieved using one of
gether with a huge inventory LMH Series for which Lane four individual insert holders, en-
of shell styles, contacts and can also incorporate a wide abling customisation using core
accessories for assembly to selection of accessories in- Powerpole connector technology.
order on short lead times. All cluding J sealing glands and Result is, Spec Pak Extreme is ca-
Plastic Bodied
key features of the initial Han-Yel- The installation dimensions the way in which the protective
lock concept including internal give a compact profile in ma- covers can be snapped in place on
Connectors Are
latched connector hood locking, a chines and switch cabinets, while both sides of the housing.
IP67 Rated
wide range of modules enabling a a choice of function orientated Customers can choose the di-
large number of potential configu- cable outlet angles ensures easy rection of the cover swivel area,
rations, an adaptor frame for use handling and assembly in densely allowing adaptation to the indi-
with modules in Harting’s Han- packed connector panels. Han- vidual application during the Now available from stock at Lane
Datasheet Download
snap into the front or back walls of interface against unintentional or ries plastic bodied miniature cir-
the housing, and a protected unauthorised opening. Mating cular connectors for rugged, wa-
Datasheet Download
trical signal contacts and/or high mitek’s SI series and Boonton’s Features include stainless steel
power electrical contacts. The PIM testers are examples where coupling nuts, white bronze plated
Connectors A
mode fibres and suitable for com- serts means the connectors provide
Range Expands
pling new Amphenol Bulldog con- offered by these new connectors,”
nectors that combine quick release, explains Acal’s Emma Hatton,
Amphenol Second
dustrial power applications.
All Series 692 and UL approved where a protected interface is ceivers. The kits can also be as-
Sources Radiall
693 connectors come with 3+PE or needed. This field installable kit sembled over existing cables.
Connection Kit
6+PE silver contacts. Screw clamp provides low cost sealing at the “We welcome Amphenol as a
termination is also available for the transceiver to cable interface and second source for the R2CT prod-
3+PE versions and a screw clamp, ensures robust mechanical and uct line,” says Marnix van der Mee,
solder or crimp termination for Amphenol is now a licensed sec- environmental performance. Radiall ‘s Business Development
6+PE versions. ond source for Radiall R2CT con- The kit is designed for optical Manager. “The innovative system
The right angled connectors are nection kits, manufacturing and systems using SFP transceivers makes the installation and mainte-
rated up to 16A/contact and up to marketing the connectors. The and duplex LC terminated fibreop- nance of FTTA applications faster
600V for UL versions. Cordsets and R2CT connection kit provides a tic cable. It can also be used with and easier. With Amphenol as a
panel mount connectors are avail- waterproof, sealed connection for copper systems and even reused, certified second source, we can
able for a complete connecting fibre to the antenna, FTTA, re- allowing cables and transceivers to help extend the global acceptance
Concept Suits
Cable Engineering
materials and cable designs have
Network Cabling
The connectors feature internal realised products that minimise
In The Round
strain relief as standard and users particulation and outgassing while
are guaranteed >500 mating cy- Harting Ha-Vis preLink is a maximising longevity, a qualities
cles. Cable outlets range from new installation concept for data combination, it says, not found in
2.5~8mm dia. network cabling based on the any other cable technology.
Lane says it is an ideal source for ISO/IEC 11801 standard. This The low coefficient of friction and
all key connectors including circu- new technology, says Harting, excellent tear resistance of Gore’s
lar, filtered, RF, coaxial, sub-minia- simplifies cabling, saves installa- expanded PTFE composite jacket
ture, backshells and adaptors, D tion time and enables extensions material enable its high flex cables
connectors, aerospace, test & and conversions without incur- to maintain excellent signal integrity.
measurement, IDC, PCB connec- ring significant interruptions in This flexible material also allows the
tors, edge connectors and connec- ongoing operations. flat cables to be stacked on top of
UPS Based On
Ultra-Capacitors P r o g r a m ma b l e Su p p l y Green Supply Is
Datasheet Download
tion with options of 4, 5, 6.5 and sure that the DLM is ideal for the cooling alone and with only
10kW versions easily configurable most demanding applications. 15cfm of forced cooling, the full
R eg u l a t ed Co n ve rt ers
for UPS system requirements and 150W output is achievable.
series connectable for systems re- ECP150 operates over -20~
P ro v i de U nr egu l a te d
For full editorial
quiring up to 750V. +70OC, suiting most environ-
Datasheet Download
o r S e mi - R eg u l a t e d
available up to +50OC with der-
ating above. No additional heat
Power Supplies
A l ter na t i v e
sinking is required.
The units comply with
Stand Tough
EN55022 level B for conducted
Environments
noise without the need for addi-
Differential
plies from TDK-Lambda comply
In Inductance
power consumption that remains
below 0.5W. Rated at 250W, the
GWS250 ac/dc supply comes in
four versions with nominal out- HVSM Hi-In-
puts of 12V, 24V, 36V and 48V. ductance differ-
With a compact footprint, 1U Energy optimised intermediate tions or mounted with a base ential EMC in-
high, this PSU is convection cooled bus converters from Ericsson plate for conduction cooling to a ductors from
and fits into space previously re- Power Modules are now avail- suitable heatsink or cold wall. Almag deliver
quiring fan cooled solutions. Since able from Campbell Collins. Factory preset output voltages two to three
GWS250 is fanless, it is suitable for They are based on a digital core are 3~13V, with efficiencies up times the in-
applications requiring low audible controller embedding an energy to 96%. ductance of
noise levels and in equipment efficiency optimiser algorithm The eighth brick BMR454 de- conventional chokes, says the
where long life is a critical factor in and delivering fully regulated livers up to 240W or 40A in its company, from the similarly sized
remote or dusty environments. outputs at power levels and effi- 58.4x22.7mm package and pro- RVSM range.
Efficiency curve for the GWS250 ciencies usually only associated vides similar performance figures. Mounted on an industry standard
is flat, averaging 93% from 25 to with unregulated or semi-regu- Both families accept Telco vertical base to occupy minimum
100% load, ensuring optimum oper- lated converters. standard 2:1 inputs of 36~75V and board area, all chokes use distrib-
BMR453 and BMR454 come in operate over -40~+125OC. Safety uted gap powder toroids for soft sat-
For full editorial
ation under all load conditions.
industry standard five pin and features include over-current, uration and low flux leakage. With
fractional brick footprints, en- over-voltage and over-tempera- 26 designs in two package sizes, the
abling smooth migration from ture protection, as well as contin- range covers 1.3~15A with choke
other bus converter solutions. uous short circuit protection. An inductances up to 3.7mH.
BMR453 packs up to 396W or energy saving remote On/Off With high performance cores,
Datasheet 1 Download
brick. It is available either as an compact storage inductors and
Datasheet Download
file, convection cooled applica-
;;;54;+6741:+)490
"+1 2'/1 7'1+754;+6741:+)490
POWER
Outdoors Applications
and -60Vdc power distribution.
The module provides 3.3 and 5Vdc
isolated management power for
Powersolve's WM UPSs are de- IPM300 from Emerson Net- housekeeping and also the power
signed for industrial and commer- work Power is a 300W, management features for PICMG
cial applications where a wall dual input power 3.0. The module has an auxil-
mounted unit capable of with- module for Ad- iary boost supply for
standing the ingress of dust and vancedTCA charging external
moisture is required. incorporated giving 43min hold-up boards. It provides hold-up capac-
The series provides up to 1.5kVA at 1.5kVA and over 2hr at 600VA. board designers with a itors, program-
of constant, reliable power from 115 Ten year life batteries are also op- rugged quarter brick solu- mable from
or 230Vac inputs, delivering selec- tionally available. WM series UPSs tion for implementing dual re- 50~95Vdc and en-
table outputs over 100~240Vac. incorporate many standard and op- dundant, hot swappable -48V in- abling designers to signif-
The company uses its on-line, tional features designed to make puts with EMI filtering. icantly reduce external ca-
double conversion topology to them easy to use. They are ready to This new module also includes pacitance to meet hold-up time in
provide high integrity ac power go straight out of the box and with ORing, inrush control and protec- case of power feed loss.
with zero transfer time to battery remote emergency power-off incor- tion, and power management func- A built-in I2C serial bus interface
on mains failure. The design also porated, they are ideal in haz- tionality. When combined with a can be used for monitoring and re-
Datasheet Download
Up to four battery strings can be comprehensive power solution for a
Digital Voltage
wide variety of ATCA, telecom,
highly economical level. server and storage applications.
Is 1000A Rated
rated BMR463 is optimised for par-
alleling up to eight modules. This
3E series BMR463 from Ericsson configuration can deliver 160A,
Power Modules is a second gen- with each module paralleled and The continuous shortage on Hall
eration, digital point of load regula- unparalleled on demand, dynami- Effect sensors in the market, says
tor boasting unprecedented func- cally tracking and reducing power Premo, is generating big troubles
tionality. It enables systems consumption as required and opti- on the industrial field and for PV
architects to fully monitor and dy- mising the configuration for a wide and wind inverter manufacturers.
namically control the energy that is range of load conditions. So it has come up with a close loop,
delivered to strategic components Additionally, when parallel mode 1000A Hall Effect sensor mechani-
such as processors, FPGAs, ASICs is activated, an interleaving opera- cally and electrically equivalent to
and others, down to a very low, tion reduces EMI and current peak LEM LF-1005-S.
levels. A built-in module to module HCT-1000LF delivers an accu-
group communication bus ensures racy of ±0.1%, ±0.1% linearity and
current sharing is precisely con- with a measuring current of
trolled, guaranteeing that at any ±2000A, the transformation ratio
is 1:5000.
For full editorial
point of operation each BMR463 bandwidth of 150kHz.
Supply voltage is ±15~24Vdc,
Datasheet Download
delivers the exact current required
by the payload while keeping effi- with >6kVac isolation and a dc
Datasheet Download
a high density, 0.93x0.73x0.33in
Are Surface
surface mounting package. They
1 to 3 Watts
• SIP & DIP packages
• Regulated & unregulated versions
• ±10%, 2:1 & 4:1 inputs
• 500 V to 6 kV isolation
Miniaturisation
that the limitations of claims as- ideal for integration into noise sen-
Is Ideal For
A Series ultra-miniature, dc to HV control pin is standard and ideal for
Handhelds
dc converters from Emco herald a external error amplifier control in
new standard in high voltage closed loop systems or simple
miniaturisation. The package oc- on/off control. Output power is 1W
GlobTek's five bay lithium-ion cupies <0.1in3 and is extremely with 1.5W available as an option.
and lithium polymer charging low in profile at 6.35mm high. No external components or mini-
cradles meet IEC 60950, UL 1310 Controllable outputs range from mum load are required. A propri-
and international EMC stan- 100~6000V, making the compo- etary encapsulation process and
dards. Batteries charge in three nent sized converters ideal for ap- high performance formula are used
phases: conditioning; constant plications demanding minimal to achieve excellent high voltage
current and constant voltage, col from a BQ27000 battery fuel size and weight. and thermal properties. Isolation is
and charging is terminated gauge IC embedded in the bat- Turn-on voltage is 0.7V, enabling ±500V bias on the output return.
based on minimum current level. tery pack. a wide output voltage operating Input to output leakage current is
A programmable charge timer Each cradle bay can provide range. A resonant, quasi-sine wave <100nA and coupling capacitance
Datasheet Download
charge termination. mA at 4.2V maximum. The cra- former result in clean, reliable high
The cradle design incorporates dle is warranteed for five years voltage conversion with inherently
Holder Takes
tery, height is less than 14.5mm PM202 and PU202 series ac/dc
CR1225 Cell
and footprint less than 15.4x4.8mm. power supplies from Protek
Notably, CR1225 batteries are nom- Power boast 200W of performance
inally 50mAh and fit into a smaller packed design whilst complying
MPD’s BS-1225-PC vertical space than other typical coin cell with EN60601-1 medical safety or
CR1225 battery holder is pro- batteries, such as the CR2032 EN60950-1 ITE safety standards. vide 150W of power in convection
claimed a great space saver for in- which is double the diameter. They are ideal in applications in- cooled environments and 200W
creasingly crowded and smaller BS-1225-PC is stable and secure cluding patient vicinity medical with forced air cooling.
once mounted on the PCB using devices, dental electronics and lab- The series boasts up to 92% ef-
the same tested and proven latch- oratory equipment, as well as com- ficiency with leakage currents as
ing feature as larger MPD vertical mercial process control, communi- low as 220µA at 264Vac. Input to
holders. Other features include re- cations, and instrumentation. output isolation for the PM202 se-
dundant nickel plated contacts that The PSUs accept 90~264Vac ries is 4000Vac. Comprehensive
reduce loss in connectivity during universal inputs and single output protection circuitry, including
movement and vibration. The use versions deliver 12~48Vdc. They over-voltage and short circuit is
of phosphor bronze base metal de- are compact and low in profile, provided, with EMC performance
livers low resistance and strong measuring 3x5x1.5in which meeting Level B standards. MTBF
Datasheet Download
strained applications. Units pro-
Compact Supply
Co n v ert ers Sh a p e U p
medical safety approvals.
FCM400 provides a high peak
Powers 600W
I n i L G A Fo r m a t
power capability up to 600W for
Medical Apps
0.5s for applications drawing
higher current for short periods, en-
abling users to specify a unit in
place of a larger, higher rated alter-
native, thus saving space and cost.
Accommodating the wide input
range of 80~275Vac, the range
comprises six versions with nomi-
nal outputs of +12, +15, +24, +28,
+36, or +48Vdc. An output trim al-
lows an adjustment of ± 10% to suit
XP Power’s FCM400 series single non-standard voltage requirements
output, high efficiency 400W ac/dc and compensate for any voltage
power supplies are suitable for a drops in the end system.
wide range of industrial and med- The series meets IEC 60601-1/
ical applications. And with an en- UL 60601-1 for medical equipment OKL-T/1-W12 joins Murata’s ing selection flexibility.
closed, low noise fan and measur- and IEC 60950-1/UL 60950-1 for in- Okami point of load dc/dc converter A cost-efficient way to power on-
ing just 152.4x101.6x49mm, the dustrial and IT equipment. It also series for embedded applications. It board ICs, Murata says its OKI-T/1
compact units have a power den- complies with EN 55022/EN55011 shapes up as an iLGA - inspectable will be used in applications such as
sity of 13.9W/in3 and a typical effi- for Class B conducted and Class A land grid array: innovative packag- servers and wireless equipment,
ciency rating of 85%. radiated emissions without the ing that provides easy access for sol- LED signage and power amplifiers,
Datasheet Download
one of the highest power densities OKL-T/1-W12 outputs 1A maxi- datacomms and industrial markets.
of any 400W power supply with mum from a nominal 12Vin, while OKL-T/1-W12 measures just
Intermediate Bus
input can be 2.9~14Vdc, wider 12.4x12.4x4.57mm max and is
ation, highest reliability and maxi- than the previously released 3A based on fixed frequency synchro-
DC/DC Converters
mum energy saving. and 6A versions. The converter is nous buck converter switching
Energy Optimised
With 96.5% peak efficiency and ideal for applications requiring topology. This high power conver-
a substantially flat efficiency curve ultra-wide inputs and low output sion efficiency PoL module is out-
from 15~100% load, the quarter- current. The 1A OKL versions also put programmable over 0.9~5.5Vdc
Datasheet 1 Download
conditions. The result, says the
Datasheet 2 Download
company, is the lowest power dis-
sipation, lowest temperature oper-
Datasheet Download
output from a universal
input of 85~264Vac. It comes in 3.3,
Automated Module
ment in a range of industries from meric, waveforms and trends. A
inverter and drive design to alter- vector display is available for volt- ing and for this, special test hard-
Hardware Testing
WT1800 performs up to six pow-
Oscilloscope Platform Is
needs to be adapted to the test ob-
ject in question.
Combination
Generator Has
LeCroy's WaveRunner 6 Zi oscillo- 40GS/s sample rate, low noise, fast 50MHz Range
scopes ooze superiority in a test in- operation, a full line of probing so- TG5011G from Aim-TTi is a com-
strument with a powerful feature set lutions and extensive serial data bined function/arbitrary/pulse gen-
including wide application pack- analysis tools, they are the most erator with a frequency range of
ages, advanced triggering to isolate versatile oscilloscopes in the 1µHz~50MHz. It has a GPIB inter-
events, a user interface developed 400MHz to 4GHz class. face in addition to USB and LAN
for quick and easy navigation, a LeCroy is also pre-announcing the LXI interfaces. can be set between 2000s and 80ns
wide range of probing options, and first product line of 12bit scopes with Arbitrary waveforms up to 128k (0.5mHz to 12.5MHz) and the duty
lightning fast performance. 400MHz bandwidth, 2GS/s sample words can be generated at 14bit ver- cycle can be as low as one in two
WaveRunner 6 Zi features a pris- rate and up to 256Mpts. This will tical resolution and 125Msamples/s. billion. Rise and fall times are also
tine signal path of matchless signal launch in the coming months. A front mounted USB port enables independently variable.
fidelity with low noise. This per- In addition, LeCroy has designed external Flash memory to store up to A wideband noise generator cre-
formance is augmented by a huge WaveRunner 6 Zi with a pivoting 1000 waveforms and a USB memory ates Gaussian white noise with a
offset and time base delay adjust- display that permits viewing sig- stick provides fast, convenient wave- high crest factor and a bandwidth
ment to allow easy signal and am- nals vertically as well as horizon- form transfer to and from a PC. of 20MHz. Noise can be added to
plifier performance assessment and tally to obtain more detail for opti- TG5011G incorporates pulse any waveform or can be used as a
Test Outlook
AWG7000C Series continues our
tradition of listening to customers
Tektronix’s AWG7000C Series ar- and meeting their needs with the Joint interoperability and valida-
bitrary waveform generators boast most capable and versatile wide- tion testing by Agilent and Al- The 2011 Automated Test Outlook
delivery of the industry's only band RF/Microwave signal gener- tair Semiconductor using Al- report from National Instruments
COTS solution for creating wide ation solution in the industry,” tair's 4G LTE chipset in shares findings of the company's re-
modulation bandwidth RF/mi- says Tektronix Director Bob conjunction with Agilent PXT search into the technologies and
crowave signals up to 2.5GHz with Hiebert. “For wideband signal cre- wireless communications test methodologies shaping test and
improved rise and fall of 35ps for ation, our arbitrary waveform gen- set and N6070A series signalling measurement. This report details
high speed erators are the conformance test software is ex- trends that apply across numerous
serial sig- only commer- pected to accelerate LTE device industries including consumer elec-
nals. With a cially available development and testing solu- tronics, automotive, semiconductor,
significantly solution to pro- tions in new operating bands. aerospace and defence, medical de-
lower price vide an accu- Altair's LTE chip portfolio in- vices and communications.
point, the rate, repeatable cludes the FourGee-3100 base- With insight from the report, en-
wide band- wide band- band and FourGee-6200 RFIC gineers and managers can take ad-
width option width signal chipsets. The FourGee-3100 is a vantage of the latest strategies and
allows cus- without the 3GPP LTE baseband processor best practices for optimising any
tomers to purchase a dual channel need for custom designed equip- that supports LTE category 3 test organisation.
12Gsps solution that will create fast ment or golden DUTs.” throughputs of 100Mbps DL and The 2011 Outlook is based on
rise and fall time, wide modulation Through direct synthesis, the 50Mbps UL. The chip imple- input from academic and industry
bandwidth signals for less than AWG7000C waveform generator ments a 20MHz MIMO receiver research, user forums and surveys,
$100,000. accurately creates wide band- and is based on a proprietary O2P business intelligence and advisory
AWG7000C Series is designed width on demand waveforms up software defined radio processor. board reviews. With this data as its
to meet high performance signal to a 4.8GHz carrier frequency Processor performance exceeds foundation, the report delivers a
generation needs across a number with the new Option 02. For traditional comms DSP cores yet broad representation of the next
of market segments including RF greater frequency performance, consumes a fraction of the power. generation of trends for meeting the
and microwave design and char- AWG7000C can still be configured The FourGee-6200 is a multi- business and technical challenges
acterisation in avionics, radar and with the higher data rate option band RF transceiver that sup- in test and measurement. The report
short range wireless communica- that doubles the data rate to ports any 3GPP LTE band over is organised into five categories:
Teseq Ltd.:RNLQJKDP8.
7XNVDOHV#WHVHTFRP
ZZZWHVHTFRXN
Teseq AG Sales International Switzerland
7VDOHV#WHVHTFRP
ZZZWHVHTFRP
Pa r a m e t r i c Te s t
frequency range up to 12.75GHz band radar equipment and in a vari-
has this feature, says the company. ety of other applications.
Throughput &
An electronic step attenuator is Like models operating up to
beneficial when the generator's level 6GHz, the 12.75GHz signal genera-
Accuracy E nhanc ed
settings must be changed fre- tors in R&S’s SMB100A family also
quently. In production lines or in feature a very high output level as
ATE systems, it ensures, for exam- standard, outstanding RF charac-
Probing Platform...
ever wide application flexibility
Gets Safety
phone, WLAN and WiMax base tProbe the latest hardware platform previous analyser such as portabil-
Firmly In Hand
stations, as well as TV and radio for T1, E1, VF and serial data analy- ity, USB interfacing, remote acces-
transmitters. sis and emulation hardware from sibility, scripting and a vast collec-
System Speeds
crotek is the EF0691 probe that strength meters, EF0691 provides a
can detect electric fields emanat- cost-effective means of complying testing time reduction, but more
PXI Production
ing from equipment operating at with BS EN 50492 which calls for than that, we achieved dramatic
Tests Fivefold
100kHz~6GHz, making it ideal for safety evaluations of all perma- growth of the production capac-
nently installed RF sources up to ity and throughput, giving us the
6GHz in the vicinity of base sta- ability to fulfil orders rapidly in
tions. Until now such measure- By deploying Aeroflex’s PXI the growing market.”
ments would have required the use based test systems, MobileAc- Aeroflex PXI 3000 Series was
of an 18GHz probe, and these are cess significantly increased the configured from open architec-
significantly more expensive in speed of its device testing while ture hardware and software mod-
terms of both capital outlay and on- maintaining the same level of test ules, including fast switching
going calibration costs. coverage. Production test speeds synthesisers, optimised software
As an isotropic probe, EF0691 increased fivefold compared to a based measurement engines and
measures three spatial components competitor installed GPIB based system triggering between the
of an electric field, with the result- test system and this improve- signal generator and the signal
ant field strength automatically cal- ment helped MobileAccess meet analyser. The solutions improved
culated by the NBM meter. Safety increased customer demand for test speed at multiple frequency
measurements can be made its products by increasing pro- bands for gain, ripple, frequency
quickly and accurately without duction throughput. response, noise, and IP3. Further
needing to take readings in three “I would like to emphasise that test improvements were made
orthogonal directions. Individual by deploying the PXI based test possible by deploying a faster
calibration data is stored in system,” explains Yossi Gil, Mo- computer and optimised software
EPROM with the necessary correc- bileAccess’s Engineering VP, “we that uses advanced features of
20GHz RF Signal
Digital Sensors Monitor Temperature
wideband DCFM and high speed
Generator Is
pulse modulation enable testing a
Datasheet Download
Datasheet Download
Upgraded Toolset
Includes Loopback Test
Convergence of Design and Test
SD loopback testing is now part of upgraded firmware supporting im-
Elan Digital's SD test tools family, proved CIS handling where CIS
Dr James Truchard, NI’s President, CEO & co-founder presents the
providing users with simple, low bytes can be accessed in random
next phase in integrating design and test. Datasheet Download
cost, but highly effective ways to any time. It has full SD/SDIO high
debug or otherwise analyse the speed support and in memory
performance of SD/SDIO based mode switching to high speed is
systems. SDLBT5 allows users to via CMD6 resulting changes to
set up customised SD/SDIO com- function registers. In SDIO mode
mands/responses via a simple USB switching to high speed is done via
memory stick. CMD52 write to the appropriate
This latest version now provides CCCR register.
Improved handling of CMD52
RAW mode with SD means Read
After Write is now fully supported
with CMD52 and for improved
CMD53 byte/block mode, CMD53
data transfers in both byte mode
and block mode are fully supported
Datasheet Download
Relays Withstand
3A/28V. minimising RFI emissions.
Requiring just a 4.95mm mount- Optically coupled circuitry pro-
Ph oto vo l ta ic R i go ur s
ing hole, this switch boasts a mini- vides exceptional noise immunity
mum lifetime of 6000 cycles at full and 2500Vrms isolation between
load. A dry contact version provid- the low voltage control and high
ing reliable operation at very small voltage output. Additionally, the
Shunt Resistors
appliances and other equipment The two pole NO 66.22x600, sistive and reactive loads. As a re-
needing reinforced insulation, high 66.22x600S and 66.82x600 30A sult, the robust device is suitable
Datasheet Download
100~300A in a sturdy metal clad 360mW. In common with the 66 mounting adaptor is also available
housing. Series specials, the 45.31 has and a wide range of coil voltages
Datasheet 1 Download
deliver 0.50% tolerance with clearance and creepage distance,
Po we r C ap a c i t o r s
supplied in a metal clad housing MSC’s Time Machine is a com-
for safety, says the company, plete programming kit for SiTime's
Bo ast L on g Life
making it more suitable for end MEMS based silicon timing solu-
product use ideally in renewable tions. This MEMS oscillator pro-
energy applications such as grammer provides fast program-
battery banks, wind turbines ming support for various singled
and solar panels. ended, differential, spread spec-
Shunts like these resistors are trum and VCXO MEMS oscillators.
typically used when current flow With the adapters supplied, five
is too large to be directly meas- different blank MEMS with pack-
ured by an ammeter so a Man- age sizes from 2.5x2 to 7x5mm can
ganin plate, inside the SH resis- be processed. 1~800MHz fre-
tor and placed in series with the quency programming, depending
load, forms the resistive element on the type, is possible with pro-
and has a known and precise re- gramming taking less than one
sistance value. Voltage drop minute. Frequency stability is up
across the resistor is proportional to ±20ppm.
to the current passing through it Vishay’s 104 PHL-ST screw termi- and 33,000µF at 200V in 9x220mm Frequency can be programmed
and a voltmeter can then ascer- nal power aluminium capacitors cases. The devices are available to up to five decimal places of ac-
tain current flow. boast a long useful life of 5000hr at with 8mm, M5 high post terminals curacy and the programmer can
Manganin alloy is known for +105°C with a high ripple current or 13mm, M6 low post terminals, in select between supply voltages of
its low resistance and TCR. Com- to 34.8A at +105°C. The devices standard or bolt nut versions. 1.8, 2.5, 2.8 and 3.3V.
prising 86% copper, 12% man- come in 11 case sizes ranging from The polarised aluminium elec- Apart from the programming
ganese and 2% nickel, it was first 35x60 to 90x220mm and feature a trolytic capacitors have a non-solid unit its USB interface and various
developed in 1892 and used as cylindrical aluminium case insu- electrolyte and are ideal for dc link package adapters, the kit comes
the legal standard for the Ohm lated with blue sleeving with pres- applications in high power switched with USB and HDMI cables, an
SESD0201P1BN-0400-090 in the
0201 package and SESD0402
P1BN-0450-090 in the 0402 pack-
age, provide bi-directional opera-
tion for placement on PCBs with-
out orientation constraints,
eliminating the need for polarity
inspection. Unlike conventional
ESD diode packaging using pads
underneath the device, these
ChipSESD devices enable easy sol-
der inspection after PCB mounting.
Surge rating is 2A under 8x20µs
Raising Alarms...
to pass IEC61000-4-2, level 4 test-
Tyco Electronics is expanding its traditional semiconductor pack- ing, says Tyco. Input capacitance
silicon ESD protection portfolio, aged ESD devices with its Chip- is 4.0pF for 0201 devices and
Datasheet Download
vices to the fold. They are said to vantages of active silicon with a cons from Sirena are detailed in a
be easier to install and rework than traditional SMT passive packaging. new catalogue from Switchtec. It
includes all Sirena's industrial
These inductors handle high range including electronic and
transient current spikes without motor driven audible alarms and
hard saturation. The saturation cur- klaxons, IP66 industrial bells, com-
rent range, depending on induc- bined sounder beacons, rotating,
tance, is 4.3~27.5A, with a heat rat- xenon, and high performance LED
ing current range of 5~41A. beacons, the popular and well
Maximum DCR is 2.05~108.46 recognised TWS series of modular
mΩ, with buzz noise reduced via light towers, and the exciting Atex
the device’s lead-free, shielded, range of beacons.
composite construction to ultra-low New products for 2011 include
levels. The inductor is specified the upgraded Lampallarm flashing,
over -55~+125°C and is charac- continuous, xenon and rotating
terised by high resistance to ther- beacons, all of which are IP65 rated
mal shock, moisture, mechanical as standard. They come in 12, 24,
Datasheet Download
each pin of the external connector stop configurations, requiring
to absorb or divert ESD but must
Slashed
LQH44P-J0 and LQH44P-P0
Limiters Tolerate
Mains AC Current Sensing Resistor Has
Improved Load-Life Stability
Acal now has Advanced Crystal
Technology's ACT9300PR clock
TBU transient blocking unit circuit oscillators on fast delivery. And the
protection devices from Bourns, new lead time of 2~4 weeks sub-
are designed for the high speed stantially reduces typical fixed os-
protection of communications cillator lead times.
ports. These devices are the indus- The speedy service, says Acal, is
try's first electronic current limiters achieved through an extensive
designed to tolerate ac mains blank oscillator inventory, factory
without circuit damage. programmed to requirements, en-
TBU DT provides superior pro- abling customers to meet ambitious
tection against faults caused by time to market and cost targets.
short circuits, ac power cross, in- The inventory of unprogrammed
duction and lightning surges. The devices covers a wide range of
devices are fast reacting protectors voltages, operating temperatures
that do not alter signal performance of 0~+70 or -40~+85OC, and stabil-
in high speed communication ports ity of ±50 or ±100ppm. This level of
unlike high capacitance protectors, choice, says the company, enables
providing an optimal solution for Vishay’s Foil Resistor division has ened stability voltage division, pre- ACT9300PR to meet most applica-
Ethernet ports in outdoor applica- unleashed a new ultra-high preci- cision current sensing, and pulse tion requirements.
tions such as security systems, PV sion bulk metal foil surface mount- applications. The device's stability The device has a 5x3.2mm foot-
panels and service kiosks. ing Power Metal Strip. This current can be further enhanced by post- print and features a frequency
“The TBU DT-Series represents sensing resistor delivers a load-life manufacturing operations such as range of 1~160MHz with typical
a whole new level of circuit protec- stability of ±0.2% at +70°C for temperature cycling, short term peak to peak period jitter of
tion for sensitive Ethernet ports,” 2000hr at rated power, said to be a overload and accelerated load-life. ±100~250pS at 33MHz. To further
comments Ian Doyle, Semiconduc- significant improvement over the Traditional passive current sen- accelerate the transition through
tor Product Manager at Bourns. load-life stability of ±1% of typical sors and shunts generate heat design and prototyping to full pro-
“Ethernet interfaces today are used current sensing products. The new under power, changing resistance duction, Acal can provide special-
almost everywhere and are ex- CSM3637Z also features an ab- and thus their voltage output. CSM ist support during development
posed to ever more serious threats solute TCR of ±5ppm/°C maximum 3637Z's low absolute TCR reduces using its UK in-house testing serv-
Superior protection without com- over -55~+125 °C at +25°C ref, and errors due to temperature change, ices for frequency control devices.
promising performance is now a tolerance of ±0.1%. Resistance thus reducing a major source of un- Included are crystal and oscillator
Datasheet Download
ports thanks to the fast acting ca- Improved resistance stability of shock and solderability, as well as
Energy Profile
point in the process.
AdvancedTCA
mounting a PMC, PrPMC, or XMC connector and all without the
Packets to
Emerson Network Power’s common platform.
For Camera
latest and most cost-effective 10G With multiple functional op-
Datasheet 1 Download
enabling a common software en- bile broadband technologies and through the superscalar Arm
Datasheet 2 Download
vironment to be used for both. By network intelligence applications, Cortex-A8 core running at
using compatible 10G and 40G and more than a dozen mobile 600MHz, says e-con.
Rugged Touch uPCI Range Is Expanded try standard, nine pin male RS232
Panel PC Is Up
ports. A fly lead makes the LPT port
To Standard
accessible via the industry standard
Brainboxes has expanded its 25pin female D connector.
uPCI range with the addition of UC-295 is a standard height ver-
American Industrial Systems, UC-263, UC-295 and UC-414 card sion of the low profile UC-263 but
AIS, has a new line in fully rugged, variations that add four RS232 otherwise identical. UC-414 is a
stainless steel HMI touch panels for ports with an LPT port to PCI standard height PCI card occupy-
superior performance in wet, dusty, based computers. ing one PCI slot providing three in-
rugged, and humid environments. UC-263 is a low profile card oc- dustry standard nine pin D RS232
All systems feature low power con- cupying one PCI slot, providing ports on the bracket with a further
sumption, high reliability, long the four RS232 ports on the nine pin D RS232 port and 25pin D
Datasheet Download
ance per watt operation. tor. The supplied 1m of spider
Options include an HMI touch cable resolves these as four indus-
Fanless Player
screen capability, sunlight read-
ability through transflective en- bility for systems needed to with-
Digital Signage
and custom I/Os, all enhancing erating conditions. Users can dis-
versatility and utility of the display. play vivid, HD content without
The displays come in a rugged, reservation since the DSB-300 sup-
polished stainless steel enclosure First standalone, robust IP4X dust- ports 1920x1080 HD and uses a Wang, Sales & Marketing VP at
built to DIN EN 1672-2 for food pro- proof player from Axiomtek, is hardware decoder. The Atom Axiomtek. “With its ease of use and
cessing machinery safety and hy- specifically designed for digital sig- processor optimises power and in- the versatility to be rack mounted
giene requirements. nage applications. DSB-300 comes creases performance/Watt. It is fan- or encased into any space, it makes
The AIS rugged touch panel in an IP4X rated enclosure, com- less for power saving. the DSB-300 the ideal choice for
PCs are designed with EN 1.4301, plete with hardware decoder, “DSB-300 is a great solution for operators looking for a dust resist-
DIN X5CrNi, SAE 304, and UNS 1920x1080 resolution and an Intel users looking for a fast digital sig- ant, durable and reliable digital sig-
Datasheet Download
with an anti-corrosive and chemi- 4GB DDR3 system memory. ment since this unit is ready for use
cal resistant touch screen for This standalone box boasts relia- right off the shelf,” says Robert
Software Targets
data capacity to densely populated place in the 2011 GSMA Technol- make this possible,” says Airspan’s
urban hotspots, AirSynergy is easy ogy Awards, for its PC960x LTE CTO Paul Senior. “We needed a
LTE Equipment
to deploy in metropolitan areas on femtocell solution. cost-effective solution with low
buildings, strand mounted from Picochip recently made the first power consumption and high RF
utility poles or on lamp posts. announcement of end to end in- performance: Picochip, as a leading
mimoOn’s mi!MobilePHYTM- Picochip provided the robust teroperability between an LTE technology supplier for small cells,
Iris EFM Modem Framework Takes Remote Monitoring Checks Critical Out
Feature Extends On Geospatial Emerson says its Liebert Services provide the total monitoring solu-
For VLAN Interactive Data tion with its proven and reliable means of knowing the health and sta-
tus of critical equipment. From simple alarm notification and custom
Latest SW/FW version of the Iris MindTree’s Rubic Gaze intu- escalation plans to proactive diagnostics, Liebert Services remote
520/540 EFM SHDSL modem itive business intelligence monitoring captures critical system data and turns it into action.
from DCombus adds compre- framework enables data render-
hensive VLAN configuration ca- ing on top of live maps including
pabilities. Port based VLAN con- Google and Bing, for interactive
figurations include VLAN double visualisation. It provides action-
tagging Q-in-Q features with se- able geospatial intelligence that
lectable 0x8100 and 0x9100 Eth- enables geographically distrib-
ernet types. With the extended uted organisations to cost-effec-
VLAN features and maximum tively analyse regional perform-
Ethernet packet size of 2047, it is ance and optimise their localised
said to enable even the most de- business strategies.
manding operator applications. Rubic Gaze provides solutions
Additional management video commonly faced in busines intel-
features provide more options in ligence visualisation challenges
the Iris modem management with such as integrating data on maps,
VLAN ID, including similar man- navigational issues and complex
Fully Virtualised
Accelerator Board
Is Cavium Based
A new octal Cavium Networks Ni-
trox PX CN1620 PCI-e accelerator
board from Interface Masters market leading performance for
Technologies targets networking SSL and IPsec, freeing up the CPU
appliances and servers requiring cycles for other applications whilst
security acceleration for encrypt/ supporting the full range of bulk
decrypt and demanding asymmet- encryption and hashing algorithms,
ric protocol operations. public key processing algorithms
Niagara 810V is targeted at a and complete IPsec Packet, SSL
wide variety of networking applica- record processing and WLAN se-
Datasheet Download
ancing, secure routers and secure
web servers. These cards boast
Energy Bluetooth
produce 1.4kW of power, allowing to be implemented up to a range in-band and out of band IIP3 for a
Datasheet Download
sive maximum speed of 56mph. and the new RX3G receiver
Radiometrix kit used in the comply with the ETSI EN 300
Datasheet 1 Download
software, Synergy for Android, is the transfer of important infor-
Industrial
Bluetooth low energy v4.0. It’s the lowing behind. Team engineers
first commercial implementation
Applications
on Android and unlocks the po-
tential for an exciting variety of
Ultra-Low Energy
innovative new consumer uses
for Android based smartphones Daily RFID’s new DL920 long
Sensor Networking
of small sensors and ultra low cess control and inventory man-
power devices. agement. And with a long range
The plug&play nature of CSR capability, the fixed RFID reader
Synergy for Android embedded enables users to read or write data
software means that OEMs can Toumaz’s TZ1053 Telran is an Toumazou says, “With this impor- to tags within 15m.
now more quickly deliver feature- ultra-low energy radio for wire- tant addition to our Connected Complying with the ISO 18000-
rich, differentiated handsets, al- less sensor networks, remote Consumer portfolio, we are har- 6B and ISO18000-6C, this reader
lowing consumers to enjoy a controls, green energy solutions, nessing our strengths in ultra-low can easily deal with data in harsh
smooth and intuitive Bluetooth low smart meters, and environmen- energy wireless healthcare to cre- environments, recording details
energy user experience with all the tal monitoring. ate solutions for high volume con- and precisely monitoring objects.
attendant power and flexibility of This high performance, sub- sumer markets. Telran is uniquely The reader provides security and
the Android operating system. 1GHz radio SoC is built on the placed to support the develop- convenience for industrial applica-
“Bluetooth low energy promises company’s proprietary AMx ment of a range of new ultra-low tions. Operating over 860~960MHz,
nothing short of a revolution in mixed signal technology, provid- energy wireless applications, and it makes management simpler.
how we interact with gadgets, by ing 1V operation via a single but- we are very excited by the prod- As a stationary RFID reader,
opening up the possibility of every- ton cell battery that consumes uct opportunities that we will be DL920 is also fast writing over dis-
thing being connected all the <3mW continuous use power. enabling for our customers with tance and supports multi-port in-
Microchip Edges
CandleDragon Module Connects With Bluetooth
For Bluetooth
Development
Bluetooth I/O module OBI411 from makes data handling much easier phones and the iPhone via an ex-
connectBlue is ideal for industrial for our industrial customers when ternal Apple authentication chip.
applications such as remote control, they look to remote control any The I/O software can also be
Microchip’s Bluetooth evaluation iPhone operation and server com- machine, read data pre- downloaded as firmware for the
kit includes CandleDragon's dot- munication via a mobile phone. In sented in an newly launched Bluetooth
stack demonstration Bluetooth these applications, it now becomes module OBS414 which has
Stack, providing an easy, cost-ef- easy to control and/or the Apple authentication
fective and flexible add-on for em- read units wirelessly via chip built in. The module
bedded evaluation and develop- Bluetooth technology. implements wireless I/O
ment using many 16 and 32bit PIC OBI 411 implements functionality with up to
MCUs or dsPIC DSCs using exist- wireless I/O functionality, 16 digital I/O signals and
ing Microchip development tools. providing read and write four analogue ADCs on each side
Current Bluetooth wireless mod- digital I/O signals or read of the module with latency at just
ules are costly and inflexible be- analogue I/O signals wire- iPhone/iPad, or read 5~8ms. This module also supports
cause they force developers to use lessly via Bluetooth. and transmit data to a server via a I/O signal control and read from an
Can2Go Zigbee
nication beyond 300m with when transmitting and 58mA
battery operation. when receiving. It measures just
Slashes Building
As well as using noise resist- 36x26x8mm and can be built into
Datasheet Download
ing and self-healing wireless mesh with a frequency pre- nisation and power control and
networking systems from Ember. cision of ±107Hz and a management applications, lighting
MeshConnect
A recent project in a 400,000ft2
Montreal box factory used Can2Go superior range and performance saving what would be thousands
Delivers Best In
to reduce installation costs by 40%, even compared to other Ember of hours of manual field upgrades
Class ZigBee
saving on labour and wiring, as well based modules. in many instances.
as on downtime and energy, in- At +20dBm power output, the “We’re thrilled to partner with
creasing worker comfort and deliv- new MeshConnect module pro- Ember to bring such leading edge
ering a faster ROI for the company. True ZigBee and Better Range De- vides extended range measured ZigBee technology to market,”
Ember’s ZigBee networking signed for ZigBee Pro applications, in miles, better in-home penetra- says CEL Director Rich Howell.
chips, software and tools simplify the module, runs the full ZigBee Pro tion for smart meters, and overall “We feel confident that the engi-
embedded software integration, software stack and Smart Energy increased link reliability for all de- neering excellence that Ember
networking and RF for developing profile, enabling applications such vices. The MeshConnect EM357 brings to market at the IC level
low power, wireless products in as smart meters, smart grid, build- module includes generous on- along with CEL’s expertise in mod-
smart energy and other remote ing automation, remote control, board external flash memory to ule design will produce a winning
High Performer
folio with extensive stocks and our
full technical design capabilities.”
Doris Hilbert, Vishay’s Key Ac-
Snapping up the Vishay Intertech- count Manager, adds, “Our two
nology Award for Best Overall Per- companies have a longlasting part-
formance, TTI says the accolade nership that goes back more than 40
confirms the strong global relation- years, a fact affirmed during many
Mouser Takes On
opers, to encour- matching and price
ing thousands of Arduino projects age regular and negotiation.
Arduino Open
ranging from electric meters and volume purchas- RS’s Marketing
Source Solutions
robotics, to gadgets that indicate ing. The creation Manager Julian
when plants need watering. of a Flexible Pricing Wood comments,
“We see Arduino as a develop- Team with specially “To support our
Arduino and Mouser have ment tool where engineers can use trained sales profes- customers’ expec-
joined forces in a distribution their technical and creative skills to sionals enables cus- tations, we aligned our
agreement that it sees now having make a concept come alive,” states tomers to enjoy sub- published one off price for PLCs
a single board computing solution Russell Rasor, Mouser’s Advanced stantial savings and HMIs to reflect manufacturers’
with a 100,000 user strong design Technology VP. “What makes Ar- through negotiated discounts. list prices back in 2005. We continu-
community. The Arduino solution duino especially attractive to the RS’s new internal account man- ally review our PLC discounts to en-
also provides a cross-development electronics design marketplace is ager team is geared up to close cus- sure that they match the market’s,
platform based on Atmel’s AVR the sheer volume of projects and tomer relationships and keeping an as well as our customers’ expecta-
8bit MCU, for expanded function- ideas shared by its users. Add to eye on maintaining customer budg- tions, which recently have meant
Va r t a C h u f f e d
increase demand for Intersil’s ana- tionship enables Avnet to integrate and Avnet Abacus is the kind of
Wit h Avne t
logue, mixed signal and power ICs. Intersil’s product portfolio into our channel partner that we need to
“Avnet Memec provides highly existing design chain services, take these solutions to the Euro-
focused demand creation that de- strengthening our offering to a pean market. The commitment
Farnell Takes On Supertex To Drive The Ben Heck Show, from guru Heck uses two simple, afford-
Up First For
chain capability. A key benefit is
Amphenol LTW
Avnet Abacus’s ability to provide a
bespoke design and development
service for cable assemblies and
First EMEA distributor for Am- customised interconnect solutions.”
phenol LTW is Avnet Abacus Hagen Goetze, Avnet Abacus’s,
following the signing of a pan-Eu- European Marketing Manager adds,
ropean agreement. Amphenol LTW “We offer our customers the gate- Rutronik is named Distributor of is one of our most important sup-
interconnect solutions are for harsh way to all Amphenol divisions as a the Year by Samsung Electro-Me- pliers in the passive sector,” says
environment applications in trans- single interface. The product portfo- chanics after achieving the highest Markus Zühlke, Rutronik’s Market-
portation, aviation, renewable en- lio of Amphenol LTW is a perfect ad- sales throughout Europe of Sam- ing Director for Passive Compo-
ergy, marine and automotive. dition to our already existing broad sung Electro-Mechanics ceramic nents. “In addition, we have come
“Avnet Abacus is the perfect dis- Amphenol product range. Especially and tantalum capacitors, chip in- to know the company over the
tribution partner to work with us in the LED Lighting connector portfo- ductors and chip resistors. course of our many years of collab-
expanding our business in EMEA,” lio will become one of the key focus “With its broad product portfolio oration as an extremely reliable
says Luc Kan, Amphenol LTW’s areas in developing new design in and innovative products, espe- partner with excellent technical
> Moisture Sensitivity - ready to use components, save time by > Waffle trays - production ready packaging options for your
avoiding the need to bake ahead of use convenience
> Peel Pack - complete protection in storage and in transit for > Re-reeling Service - ready to use and ease of storage, at no
sensitive components extra cost
> Biobag - patented technology to fully biodegrade, without > Drilled tubes - new packaging innovation, multiple pin holes to
releasing any harmful chemicals into the environment protect any number of components in transit
www.farnell.com/packaging
www.element14.com
Design with the best
A Premier Farnell Company