You are on page 1of 1

Parker Hannifin Corporation

Hydraulic Filter Division

Quality elements make


the difference
The important item in a filter O-Ring Seal Engineered
assembly is the element. It must N Positive sealing Element Design
capture and retain contaminants for optimum N The right combination
that can damage system element efficiency of pleat depth and
components. At the same time it number of pleats means
must allow flow to pass as freely lower pressure losses
as possible to perform it’s function. (longer life)
Wire N Dirt holding capacity
Reinforced Media is maximized for
There are many ways to design N Prevents pleat
and build an element, and it’s easy less frequent element
bunching change-out
to produce a low cost element. N Helps prevent
However, cost is not the only media migration
selection criteria, especially when N Maintains media
the risk is loss of critical machine efficien
performance.

For instance, wire mesh


reinforcement. Not all filter
elements have it. It’s used in
Parker elements to keep the pleats
from bunching or collapsing. If
pleats bunch, the effective surface
area of the element is reduced,
excessive pressure drop develops, Filterelements
and the filter assembly may go into Dimensions mm
premature bypass mode. N Outlet Diameter : 70
N Inlet Diameter : 34
There are many other features that N Length: 355
are included standard with every N Absolut raiting filtration (micron): 10 Elements for
quality Parker element. The table N O-Ring complect - nitrill Every Application
below outlines several. N Standard Microglass III media
N Resistance of pressure difference
for long life and excellent
for filter element: = p 10 bar system protection

Feature Advantage Benefit


• Wire reinforced • Rugged construction, stands • The reliable filtration
Microglass III elements up to abuse of cyclic flows provided assures equipment
without performance loss protection, reduces down-
• Wire support reduces pleat time, maximizes element life,
bunching, keeps pressure and allows the hydraulic
drops consistent system to operate properly
• Multipass tested elements • Filter performance backed • Filters you select have
(per ANSI/NFPA by recognized and accepted known performance levels
T3.10.8.8 R1-1990) laboratory test standards
• Complete element • All pertinent information is • Provides an easy guide to
performance data disclosure provided in an easy-to- proper filter selection
compare format

You might also like