Professional Documents
Culture Documents
Column A Column B.
______B.
4. It is a three-sided ruler, which typically has two equal sides meeting at a 90 degree angle
and to a third side at 45, 30, including 60 degree angles. a. compass
b. hard pencil
c. masking tape
d. triangle
5. What tool will you used in to reproduce the measurement of an object to any size?
a. ruler
b. protractor
c. triangle
d. triangular scales
6. What drawing instrument will be used when transferring measurements, dividing lines and
arcs into the desired number of equal parts?
a. compass
b. divider
c. masking tape
d. triangular scales
7. What drafting tool is used to protect the rest of the drawing when removing unnecessary
lines?
a. erasing shield
b. eraser
c. masking tape
d. pencil sharpener
8. How do we determine gradations of the degrees when measuring arcs, angles and circles?
a. by using compass
b. by using protractor
c. by using triangle
d. by using triangular scales
1. Before starting any drawing, be sure to keep the hands clean and free from dirt.
2. Maintain the cleanliness of the working area especially the drawing table.
3. Drop your tools and equipment after using.
4. Wipe off the surface and edges of triangles and T-squares before and after using them.
5. Keep and store your pencils properly after use.
6. Before cleaning any tool, be sure to wear the proper school uniform.
7. Throwing of tools after use is highly recommended.
8. Wipe dry the tool with a piece of cloth before keeping it.
9. When not in use, the T-square should be hung properly.
10. Lubricants must also be applied after tightening to prevent rusting.
III. Arrange the jumbled letters to form a new word that corresponds to the meaning at the
opposite side. Write your answer in your activity sheet.
IV. Read and understand the questions below then choose the letter of the correct answer.
a. 3:3
b. 3:4
c. 4:6
d. 3:5
2. Jane measured a line for her TLE project. It is 300 millimeters long. How many centimeters
is the line?
a. 40 cm
b. 30cm
c. 50cm
d. 25 cm
4. What is the most popular type of measuring tools that usually has the length
of 6 to 12 inches?
a. ruler
b. scale
c. tape ruler
d. triangle
8. Jason is making his project in T.L.E. class. He uses this tool as guide in
drawing horizontal lines up to 48”. What tool does Jason use? a. ruler
b. scale
c. triangle
d. t-square
9. Which of the following tools is used for drawing oblique and vertical lines? a.
ruler
b. scale
c. triangle
d. t-square
10. Which of the following is used for the purpose of measuring dimensions? a.
cutting tools
b. lining tools
c. measuring tools
d. testing tools