You are on page 1of 16

PIGLET PATTERN

Please note, this pattern is for personal use only.


This pattern does not come with crochet lessons, basic crochet skills and knowledge is
needed.

Materials:
(Only one ball of each colour is needed)
Colour A: James C Brett Flutterby Chunky – Soft Pink
Colour B: James C Brett Flutterby Chunky – Pink
Colour C: James C Brett Flutterby Chunky – Rose Pink
Colour D: James C Brett Flutterby Chunky – Black

Crochet hook: 4mm

Head:
1. Using colour A, work 6 sc in magic ring (6)
2. Inc in each st (12)
3. *1 sc, 1 inc** repeat * to ** 6 times (18)
4. *2 sc, 1 inc** repeat * to ** 6 times (24)
5. *3 sc, 1 inc** repeat * to ** 6 times (30)
6. Sc in each st
7. *4 sc, 1 inc** repeat * to ** 6 times (36)
8. Sc in each st
9. *5 sc, 1 inc** repeat * to ** 6 times (42)
10-11. Sc in each st
12. 6x inv.dec, sc in the rest of the sts (36)
13. 6x inv.dec, sc in the rest of the sts (30)
14-15. Sc in each st
16. *3 sc, 1 inv.dec** repeat * to ** 6 times (24)
17. Sc in each st
18. *2 sc, 1 inv.dec** repeat * to ** 6 times (18)
19. Sc in each st
20. *1 sc, 1 inv.dec** repeat * to ** 6 times (12)
Start stuffing the head firmly.
21. Inv.dec in each st (6)
Top up the stuffing.
Fasten off, leaving a long tail for sewing the last stitches together.

Ignore the colour change in the images below, I ran out of yarn!🙈

Shaping of the face:


(Guidance images below)
Using pins, mark off the following points first on the front of the face:
In row 12, count 4 sts in between on the middle of the face, add a pin on each side
Repeat the same step in row 13 and 14, you should have 6 pins in total.
Using a needle and a bit of DK cotton yarn (white or pink is fine), make the first stitch
from the right to the left pin in row 12.
Make the next st 1 st back and through the head again, exiting 1 sts back from the entry
st, pull tight to create a dent between the two sts. Repeat once more in the same sts.
Once you’re done in row 12, follow the same steps for row 13 and 14.
Fasten off and tie in loose ends.



Eyes:
Using colour D, the eyes are sewn on across round 13-14, with 4 sts in between. Go over
the same st 3-4 times, until you’re happy with the shape.

Nose:
Using colour B, in a mr, make the following sts: 2 sc, 2 hdc, 1 dc, 2 hdc, 2 sc.
Fasten off leaving a long tail for attaching across row 11-12.

Mouth:
(I would recommend marking the following with pins first)
The top of the smile will sit in row 10, 3 sts away from the nose on each side.
The lowest part of the smile will sit 2 rows down, in row 8, 4 sts long.
Make 1 long st to do the mouth and secure in place with a few sts.
To make the dimples, make a small diagonal st across each end of the mouth.

Eyebrows:
Using colour D, the eyebrows are sewn on across row 17-18 on a diagonal 2 sts wide.
Make sure the two are opposite diagonals as per the image.

Ears:
1. Using colour B, work 4 sc in magic ring (6)
2. Inc in each st (8)
3. Sc in each st
4. *1 sc, 1 inc** repeat * to ** 4 times (12)
5. Sc in each st
6. *2 sc, 1 inc** repeat * to ** 4 times (16)
7-11. Sc in each st
12. *2 sc, 1 inv.dec** repeat * to ** 4 times (12)
13. *1 sc, 1 inv.dec** repeat * to ** 4 times (8)
14. Sc in each st
Fasten off, leaving a long tail for attaching.
DO NOT STUFF.
The ears are sewn on across row 18-20 of the head.
Body:
1. Using colour C, work 6 sc in magic ring (6)
2. Inc in each st (12)
3. *1 sc, 1 inc** repeat * to ** 6 times (18)
4. *2 sc, 1 inc** repeat * to ** 6 times (24)
5. *3 sc, 1 inc** repeat * to ** 6 times (30)
6. *4 sc, 1 inc** repeat * to ** 6 times (36)
7. *5 sc, 1 inc** repeat * to ** 6 times (42)
8. *6 sc, 1 inc** repeat * to ** 6 times (48)
9-10. Sc in each st
11. Change to colour D, sc in each st
12. Change to colour C, sc in each st
13. *6 sc, 1 inv.dec** repeat * to ** 6 times (42)
14-15. Sc in each st
16. Change to colour D, sc in each st
17. Change to colour C, sc in each st
18. *5 sc, 1 inv.dec** repeat * to ** 6 times (36)
19-20. Sc in each st
21. Change to colour D, sc in each st
22. Change to colour C, sc in each st
23. *4 sc, 1 inv.dec** repeat * to ** 6 times (30)
24. Sc in each st
25. *3 sc, 1 inv.dec** repeat * to ** 6 times (24)
26. Change to colour D, sc in each st
27. Change to colour C, sc in each st
Start stuffing the body firmly
28. *2 sc, 1 inv.dec** repeat * to ** 6 times (18)
29. Sc in each st
Fasten off, leaving a long tail for attaching the body to the head.
Finish stuffing off the body and attach to row 3 of the head.

Legs (make 2):


1. Using colour A, work 6 sc in magic ring (6)
2. Inc in each st (12)
3. *1 sc, 1 inc** repeat * to ** 6 times (18)
4-5. Sc in each st
6. Inv.dec 6 times, sc in the next 6 sts (12)
7-14. Sc in each st
Fasten off, leaving a long tail for attaching.
Stuff the legs, don’t stuff the top part too much.
Attach across row 3-6 of the body

Arms (make 2):


1. Using colour A, work 6 sc in magic ring (6)
2. Inc in each st (12)
3-7. Sc in each st
8. Sc 4, inv.dec, sc 4, inv.dec (10)
9-14. Sc in each st
Stuff the bottom part of the arm, leave the top 4 rows unstuffed.
Fasten off, leaving a long tail.
Make a flat seam across the top of the arm.
Attach to row 28 the body.

Tail:
1. Chain 5
2. Starting in the second st from the hook, sc 5 times in each of the 4 chains
Fasten off, leaving a long tail for attaching the tail.
Attach to row 12 on the back.
Ta-da! Piglet is complete! 🥳

You might also like