Professional Documents
Culture Documents
RESTRICTED
OE, PIO
UV-C Virus Protection
Armrest Air Purifier
3rd Aug. 2021
◎ Project overview
- Improved air quality inside the car by filtering and sterilizing for virus, bacteria and small particles.
- Newly designed motor fan gives more powerful air cleaning but lower noise
◎ Consideration
- Installation structure of armrest, room lamp and - Supply of WIRE HARNESS connection to - Consideration of power cable installation plan
cup holder head vehicle starting power - Consideration of PCB ASSY communized Design for
- Application of HEPA Filter and Cleaning alert - Korea Certification : KC more models of vehicle in future.
- Application of HEPA H13 Grade Filter - Copper HEPA Filter
- Customized fan motor
Business Proposal
(B)
FAN
<lateral image>
;
Business Proposal
2 3 4
1 5
M/F
2 AQI (Air Quality Index) 5 steps • The air quality level is displayed according to the AQI value measured from the dust sensor.
FAN Mode (5 steps) • Fan speed is changed in the order of Step 1 -> Step 2 -> Step 3 -> step 4.
3
• Auto mode: Auto (‘A’ lights up)
• The AQI value is displayed by calculating the average value of the PM1.0, PM2.5, and PM10 values
of the dust sensor.
4 AQI no (0~999, MAX)
• If the value is more than 999, displayed “MAX”.
• Animation is displayed for the first 10 seconds of calculating the value of the dust sensor.
• Short press : 1st stage -> 2nd stage -> 3rd stage -> 4th stage -> Auto.
5 Mode change / Filter Reset button
• Long press : Initializes filter usage time. ( Red LED lights up when replacing)
Business Proposal
Very Poor
Good Satisfactory Moderate Poor
AQI value (301–400)
(0–50) (51–100) (101–200) (201–300)
Severe (>401)
• In Auto mode, the speed of the fan is determined by adding the dust sensor and data values.
• The value of the dust sensor is used by converting the values of PM1.0, PM2.5, and PM10.0 into
AQI values.
Business Proposal
Display &
Air Intake
Front Touch button
Dust sensor LED
(Intake)
Filter
Cover
Console open
handle
< Bottom>
Business Proposal
7. Development
〉 〉 〉 〉
Molding Design Tool molding Tool paint Product production Quality control
〉 〉 〉 〉
From A to Z (Planning to product production) all process are done in one house in Korea.
Ph.D. engineers, short-term product R&D, fast feedback possible.
THANK YOU
WWW.WONMOTORS.COM