Professional Documents
Culture Documents
CONCLUCION1
CONCLUCION1
Table of Contents
1 General Information .......................................................................................................... 1
1.1 Analysis Environment ................................................................................................. 1
1.2 Model Information ..................................................................................................... 1
1.3 Project Comments: .................................................................................................... 1
1.4 Size of Computational Domain ...................................................................................... 1
1.5 Simulation Parameters ................................................................................................ 1
1.5.1 Mesh Settings ........................................................................................................ 1
1.5.2 Material Settings .................................................................................................... 2
1.5.3 Initial Conditions .................................................................................................... 2
1.5.4 Boundary Conditions ............................................................................................... 2
1.5.5 Volumetric Heat Sources ................................................ ¡Error! Marcador no definido.
1.5.6 Engineering Goals ................................................................................................... 3
1.6 Analysis Time ........................................................................................................... 3
2 Results ......................................................................................................................... 4
2.1 Analysis Goals ........................................................................................................... 4
2.2 Global Min-Max-Table .................................................................................................. 4
2.3 Results ......................................................................... ¡Error! Marcador no definido.
2.4 Conclusion .............................................................................................................. 6
3 Appendix ....................................................................................................................... 7
3.1 Material Data............................................................................................................ 7
II
Fluid Flow Simulation Report
1 General Information
Objective of the simulation: Se busca salir un poco de las condiciones ideales y utilizar el solid para ver como varían
las presiones y las velocidades según el medio poroso, Isotropico o unidireccional.
Size
X min -0.045 m
X max 0.071 m
Y min -0.026 m
Y max 0.026 m
Z min -0.213 m
Z max 0.187 m
Material Settings
Fluids
Air
Initial Conditions
Thermodynamic parameters Static Pressure: 101325.00 Pa
Temperature: 293.20 K
Velocity parameters Velocity vector
Velocity in X direction: 0 m/s
Velocity in Y direction: 0 m/s
Velocity in Z direction: 0 m/s
Turbulence parameters
Boundary Conditions
Inlet Velocity 1
Type Inlet Velocity
Faces lid inlet-1/Extrude1//Face
Coordinate system Face Coordinate System
Reference axis X
Flow parameters Flow vectors direction: Normal to face
Velocity normal to face: 10.000 m/s
Fully developed flow: No
Thermodynamic parameters Approximate pressure: 101325.00 Pa
Temperature type: Temperature of initial
components
Temperature: 293.20 K
Turbulence parameters Boundary layer parameters
Boundary layer type: Turbulent
2
Fluid Flow Simulation Report
Static Pressure 1
Type Static Pressure
Faces lid outlet-1/Base-Extrude//Face
Coordinate system Face Coordinate System
Reference axis X
Thermodynamic parameters Static pressure: 101325.00 Pa
Temperature type: Temperature of initial
components
Temperature: 293.20 K
Turbulence parameters Boundary layer parameters
Boundary layer type: Turbulent
Goals
Surface Goals
SG Av Total Pressure 1
Type Surface Goal
Goal type Total Pressure
Calculate Average value
Faces Face<2>@lid inlet-1
Coordinate system Global coordinate system
Use in convergence On
SG Av Total Pressure 2
Type Surface Goal
Goal type Total Pressure
Calculate Average value
Faces Face<1>@lid outlet-1
Coordinate system Global coordinate system
Use in convergence On
Equation Goals
Equation Goal 1
Type Equation Goal
Formula SG Av Total Pressure 1-SG Av Total Pressure 2
Dimensionality Pressure & stress
Use in convergence On
2 Results
2.1 Analysis Goals isotropico
Goals
Name Unit Value Progress Criteria Delta Use in
convergence
SG Av Total Pa 101503.76 100 17.8684407 4.77994876 On
Pressure 1
SG Av Total Pa 101382.91 100 1.04160626 0.913885087 On
Pressure 2
Equation Pa 120.85 100 16.8584568 3.90634541 On
Goal 1
Min/Max Table
Name Minimum Maximum
Density (Fluid) [kg/m^3] 1.20 1.21
Pressure [Pa] 101311.72 101480.13
Temperature [K] 293.19 293.25
Temperature (Fluid) [K] 293.19 293.25
Velocity [m/s] 0 11.241
Velocity (X) [m/s] -10.079 3.771
Velocity (Y) [m/s] -1.873 1.731
Velocity (Z) [m/s] -10.693 2.149
Mach Number [ ] 0 0.03
Velocity RRF [m/s] 0 11.241
Velocity RRF (X) [m/s] -10.079 3.771
Velocity RRF (Y) [m/s] -1.873 1.731
Velocity RRF (Z) [m/s] -10.693 2.149
Vorticity [1/s] 0.07 2050.49
Relative Pressure [Pa] -13.28 155.13
Shear Stress [Pa] 0 1.22
Bottleneck Number [ ] 8.4712635e-08 1.0000000
Heat Transfer Coefficient 0 0
[W/m^2/K]
ShortCut Number [ ] 1.4939292e-07 1.0000000
Surface Heat Flux [W/m^2] -0 -0
Surface Heat Flux (Convective) -3836440.925 3592964.219
[W/m^2]
Acoustic Power [W/m^3] 9.347e-48 1.570e-08
Acoustic Power Level [dB] 0 41.96
4
Fluid Flow Simulation Report
2.3 Analysis Goals Unidireccional
Goals
Name Unit Value Progress Criteria Delta Use in
convergence
SG Av Total Pa 101501.57 100 68.9442442 5.49210002 On
Pressure 1
SG Av Total Pa 101382.90 100 1.10350702 1.07579027 On
Pressure 2
Equation Pa 118.67 100 68.9254786 4.42967335 On
Goal 1
Min/Max Table
Name Minimum Maximum
Density (Fluid) [kg/m^3] 1.20 1.21
Pressure [Pa] 101310.24 101490.61
Temperature [K] 293.18 293.25
Temperature (Fluid) [K] 293.18 293.25
Velocity [m/s] 0 11.523
Velocity (X) [m/s] -10.197 4.624
Velocity (Y) [m/s] -2.718 2.633
Velocity (Z) [m/s] -10.604 2.252
Mach Number [ ] 0 0.03
Velocity RRF [m/s] 0 11.523
Velocity RRF (X) [m/s] -10.197 4.624
Velocity RRF (Y) [m/s] -2.718 2.633
Velocity RRF (Z) [m/s] -10.604 2.252
Vorticity [1/s] 0.69 2282.02
Relative Pressure [Pa] -14.76 165.61
Shear Stress [Pa] 0 1.24
Bottleneck Number [ ] 6.1299298e-08 1.0000000
Heat Transfer Coefficient 0 0
[W/m^2/K]
ShortCut Number [ ] 1.3138924e-08 1.0000000
Surface Heat Flux [W/m^2] -0 -0
Surface Heat Flux (Convective) -3806124.340 3594206.160
[W/m^2]
Acoustic Power [W/m^3] 6.870e-41 4.126e-07
Acoustic Power Level [dB] 0 56.16
5
Fluid Flow Simulation Report
2.5 Conclusion
Objective of the simulation: Al comparar ambos resultados (modelo isotrópico vs unidireccional) obtenidos mediantes
las tablas y las gráficas, podemos observar la diferencia entre las distribuciones de presiones (mas homogéneo el
modelo isotrópico) y obviamente las variaciones de las pérdidas de carga que se generan entre un medio y otro.
Como valoración personal, más que académica, puedo decir que voy tomando más práctica en la solicitación de
resultados, que uno pretende obtener del solid.
6
Fluid Flow Simulation Report
3 Appendix
3.1 Material Data
Engineering Database
Gases
Air
Path: Gases Pre-Defined
Specific heat ratio (Cp/Cv): 1.399
Molecular mass: 0.0290 kg/mol
Dynamic viscosity
Dynamic viscosity[Pa*s]
Temperature[K]
Temperature[K]
7
Fluid Flow Simulation Report
Thermal conductivity
Thermal conductivity[W/(m*K)]
Temperature[K]