Professional Documents
Culture Documents
一、example 4: unit:mm
一、example 4: unit:mm
unit:mm
Fig.1-1
1
Fig.1-2
Click on the "insert" - "sketch in task environment" and dialog box pops up.
Click on the X-Y datum in the screen and finish the sketch as shown in Fig.1-3.
Extrude the sketch as shown in Fig.1-3.
2
Fig.1-3
3
3. edge blend
Fig.1-4
Click the menu ‘format’- ’wcs’- ’dynamic’ to move the wcs coordinate to the center of the circle and then
rotate it as shown in Fig.1-5.
4
Fig.1-5.
5
5. sketching and extruding
Click on the "insert" - "sketch in task environment" and dialog box pops up.
Select the ‘existing plane’ and click the X-Y face of extrude2 in the screen and finish the sketch as shown in
Fig.1-6.
Extrude the sketch as shown in Fig.1-6.
6
Fig.1-6
6. move object
click the menu ‘move object’ and select the object to pop up the dialog as shown in Fig.1-7.
7
Fig.1-7
7. subtract
8
Fig.1-8
9
8. Set wcs to absolute
Fig.1-9
9. mirror
Click the menu ‘transform’ and mirror the body as shown in Fig.1-10.
10
11
Fig.1-10
12
10. move object and unite
13
Fig.1-11
14
11. edge blend
Fig.1-12
12.hide curve
ctrl+w
15
Fig.1-13
.
16
13. Create holes
17
18