You are on page 1of 2

PS SERIES

General Emergency Medical Fire &


Purpose Lighting Security

PS-1212
FEATURES
12V 1.4 AH @ 20-hr. •• Absorbent Glass Mat (AGM) technology for
12V 1.3 AH @ 10-hr. superior performance
Rechargeable Sealed Lead Acid Battery •• Valve regulated, maintenance free spill proof construction
PS – General Purpose Series
•• Power/volume ratio yielding excellent energy density
TERMINALS: (mm) •• Rugged vibration and impact resistant ABS case
and cover
F1: Quick disconnect tabs,
0.187" x 0.032" – Mate with
AMP. INC. FASTON “187” series
•• Gas recombination technology
•• 5 year design life
2.5

APPROVALS
4.75
1.5

3.2 •• Approved for transport by air. D.O.T., I.A.T.A., F.A.A.


6.35 and C.A.B. certified
•• U.L. recognized
0.8

Torque – Not Applicable •• ISO9001:2015 – Quality management systems

DIMENSIONS: inch (mm) PERFORMANCE SPECIFICATIONS


L: 3.78 (96) Nominal Voltage 12 volts (6 cells)
W: 1.69 (43)
H: 2.04 (52)
HT: 2.28 (58) Nominal Capacity
20-hr. (70mA to 10.50 volts) 1.40 AH
W Tolerances are +/- 0.04 in.
(+/- 1mm) and +/- 0.08 in. 10-hr. (130mA to 10.50 volts) 1.30 AH
(+/- 2mm) for height 5-hr. (240mA to 10.20 volts) 1.20 AH
dimensions. All data subject 1-hr. (850mA to 9.00 volts) 0.85 AH
to change without notice.

Approximate Weight 1.20 lbs. (0.54 kg)

Internal Resistance (approx.) 100.0 milliohms


Sealed Rechargeable
Battery
Max Short-Duration Discharge Current (10 Sec.) 14.0 amperes
HT H
MODEL PS-1212 Shelf Life (% of nominal capacity at 68°F (20°C)
1 Month 97%
STB E R
® 12 Volt 1.4 Amp. Hr. MU
EC
T TE R Y

Pb
YCL E D
BA

www.power-sonic.com
3 Month 91%
MH20845 NONSPILLABLE

6 Month 83%
L
Operating Temperature Range
Charge 5°F (-15°C) to 122°F (50°C)
Discharge -4°F (-20°C) to 140°F (60°C)
L: 3.78 (96) W: 1.69 (43) H: 2.04 (52) HT: 2.28 (58)
CORPORATE HEADQUARTERS POWER-SONIC EUROPE LIMITED Case ABS Plastic
(USATolerances are EXCLUDING
AND INTERNATIONAL +/- 0.04EMEA)
in. (+/- 1mm)
(EMEAand +/- 0.08
– EUROPE, MIDDLEin. (+/-
EAST AND2mm)
AFRICA)for
height
Power-Sonic dimensions. All data subject
Corporation to change
3 Buckingham without notice.
Square,
7550 Panasonic Way, San Diego, Hurricane Way, Wickford, PSC-12300A-C
Power Sonic Chargers
California 92154 Essex SS11 8YQ PSC-12300-PC
T: +1 (619) 661 2020 T: +44 (0)1268 560686
F: +1 (619) 661 3650 F: +44 (0)1268 560902
E: customer-service@power-sonic.com E: salesEMEA@power-sonic.com
Rev1: 11/18

To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E www.power-sonic.com
PS SERIES
PS-1212 12V 1.4 AH @ 20-hr.
12V 1.3 AH @ 10-hr.

Rechargeable Sealed Lead Acid Battery


PS – General Purpose Series
SHELF LIFE & STORAGE
100 SHELF LIFE & STORAGE
SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY
LIFE CHARACTERISTICS USE
IN STAND-BY USE
Charging is not

LIFEAmbient
CHARACTERISTICS IN STAND-BY USE
necessary unless
Capacity Retention Ratio (%)

100 100% of capacity


is required. Charging is not Temperature 20˚C (68˚F)
necessary unless 100
Capacity Retention Ratio (%)

80

Retention Capacity (%)


5oC Charging before 100% of capacity
use is necessary is required. Ambient Temperature 20˚C (68˚F)
80 (41oF) to help recover 80 100

Retention Capacity (%)


5fulloCcapacity. Charging before
60 use is necessary 60
(41oF) to help recover 80
full capacity. Float Charging Voltage
60 o 40 60
30 C 2.25 - 2.30 V/Cell
o
40 C 20 C o
o
40 (104oF) (86 F) (68oF) Float Charging Voltage
o 20 40
40oC 30 C
o
20oC 2.25 - 2.30 V/Cell
0 40 (104oF) (86 F) (68oF) 0 20
0 2 4 6 8 10 12 14 16 18 20 0 1 2 3 4 5
0 0 Years
Standing
0 2 4Period
6 (Months)
8 10 12 14 16 18 20 0 1 2 3 4 5
Standing Period (Months) Years

CHARGING CHARGERS
Cycle Applications: Apply constant voltage charge at Power Sonic offers a wide range of chargers suitable
2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. for batteries with a variety of capacities.
Initial charging current should be set at less than 0.25C
Please refer to our website for more information on
Amps. Switch to float charge to avoid overcharging.
our switch mode and transformer type chargers.
“Float” or “Stand-By” Service: Apply constant voltage
Please contact our technical department for advice if
charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v
you have difficulty in locating a suitable charger.
Monobloc at 20°C. When held at this voltage, the battery
will seek its own current level and maintain itself in a fully
charged condition. FURTHER INFORMATION
Temperature Compensation: Charging Voltage for both Please refer to our website www.power-sonic.com
Cyclic and Standby applications should be regulated in for a complete range of useful downloads, such as
relation to ambient temperature. As temperature rises product catalogs, material safety data sheets (MSDS),
charging voltage should be reduced to prevent overcharge ISO certification, etc.
and increased as temperature falls to avoid undercharge.
For further charging information including temperature
compensation factors, see Power Sonic Technical Manual/
Power Sonic Charger specifications.

APPLICATIONS
•• General purpose •• Medical
•• Emergency lighting •• Fire and security

CORPORATE HEADQUARTERS POWER-SONIC EUROPE LIMITED


(USA AND INTERNATIONAL EXCLUDING EMEA) (EMEA – EUROPE, MIDDLE EAST AND AFRICA)
Power-Sonic Corporation 3 Buckingham Square,
7550 Panasonic Way, San Diego, Hurricane Way, Wickford,
California 92154 Essex SS11 8YQ
T: +1 (619) 661 2020 T: +44 (0)1268 560686
F: +1 (619) 661 3650 F: +44 (0)1268 560902
E: customer-service@power-sonic.com E: salesEMEA@power-sonic.com
Rev1: 11/18

To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E www.power-sonic.com

You might also like