Professional Documents
Culture Documents
reviewer4@nptel.iitm.ac.in ▼
Unit 2 -
Assignment 0: Basics
Course
outline
Assignment 00
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-07-23, 23:59 IST.
the portal assignment.
Assignment 0: 1) Euler-Bernoulli beam theory predicts accurate result if beam length (L) to thickness (h) 1 point
Basics ratio is
Quiz :
L/h=5
Assignment 00
L/h=10
Week 1 : Basic
Terminology, L/h<15
Equations and
Methods L/h>20
5
Week 4 :
Approximate 9
Solution
Techniques and No, the answer is incorrect.
3D solution Score: 0
Accepted Answers:
9
541.66 N
352.66 N
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
A project of In association with
Funded by
Accepted Answers:
Powered by
541.66 N
[3 +
5√ 3 T
−5
2 2
+ 3√3 − 3]
[3 −
5√ 3 T
−5
2 2
− 3√3 3]
[1 +
5√ 3 T
−5
2 2
+ 3√3 3]
[3 +
5√ 3 T
−5
2 2
+ 3√3 3]
[3 +
5√ 3 T
−5
2 2
+ 3√3 3]
3e2x + ex
e2x + ex
e2x + e−x
e2x + 3ex
No, the answer is incorrect.
Score: 0
Accepted Answers:
e2x + ex
6) For Graphite-Epoxy composite, Young’s modulus along longitudinal and transverse 1 point
direction are E1 = 25GPa and E2 = 1GPa , respectively. If ν12 = 0.28 , then ν21 will be:
1.12
0.0112
0.28
0.028
=[
10 −5
] . The principal stresses will be:
7) 1 point
For a given stress field σ
−5 2
12.40, -0.403, 0
11.40, 0.403, 0
-12.40, -0.403, 0
12.40, 0.403, 0
8) For a thick 0.01m steel flat panel of span a , governing equation is expressed 1 point
as Dw0,xxxx = q0 where q0 is uniformly distributed load. If panel is subjected to the following
boundary conditions: at x = 0 & a , w = 0 & Mxx = 0
The deflection at x = 0.5 will be:
5a3 q0
384D
5a4 q0
24D
5a4 q0
384D
5a3 q0
24D
9)
⎡1 0 2⎤ 1 point
⎣3 0 5⎦
Transform a matrix a ij =
2 2 0 defined in (x1 , x2 , x3 ) coordinate system into a
⎡ 4 0⎤
−3
0
⎢
⎢ −1 3
0⎥
⎥
⎣ 0 5⎦
2 2
0
⎡4 0⎤
3
0
⎢
⎢ 12 3
0⎥
⎥
⎣0 5⎦
2
0
No, the answer is incorrect.
Score: 0
Accepted Answers:
π, −π, π, −π
No, the answer is incorrect.
Score: 0
Accepted Answers:
π, −π, π, −π
End