Professional Documents
Culture Documents
Valvula Compensadora STX
Valvula Compensadora STX
STEP 33 STEP 35
MK990269
MK990271
Record the position of the slot (1) in the bypass Remove the cap nut from the pressure adjusting
orifice. Hold a rubber plug over the tank port (2) and screw.
use a short, controlled (2.75 bar or 40 psi) burst of
compressed air to the pressure port (3) to dislodge
the orifice from the valve. Remove the orifice. STEP 36
STEP 34
MK990270
STEP 38 STEP 41
1 1 ll
Loosen the lock nut and remove the adjusting screw, Remove the spring pivot.
lock nut and seal.
STEP 42
STEP 39
MK99D278
STEP 40 STEP 43
© 0
MK99D280
Remove the springs, spring washer and 0-ring from Remove the pressure compensating spool.
the adjustment cap. Discard the 0-ring.
8005-14
STEP STEP
44 38 STEP 41
STEP 47
MK990284
STEP 50 STEP 52
OIJ O @ •
MK99D291
Remove the spring, spring washer and 0-ring from the adjustment cap. Discard the 0-rings. 8005-16
STEP 50 STEP 52
STEP 51
MK99D290
Remove the flow compensation spool plug and seal. Discard the seal.