Professional Documents
Culture Documents
Drain Traps
ODIM Numet SYSTEMS AND COMPONENT ENGINEERING
MECHANICAL
Within specific designs of nuclear recators, explosive). They are also used to bleed evolved gas from process vessels
and remove trapped air from a process system on startup. For gas service,
drain traps are designed to perform two soft elastomer seats are generally used to minimize gas loss.
distinct functions: to enable the draining Drain trap process
of liquid from gas process system, i.e. In both designs of drain trap, a needle valve is actuated by a float
mechanism. The difference between the two styles is in the orientation
liquid purge; and to enable the removal of of the float mechanism. In the gas release drain trap the buoyancy force
trapped gases from a liquid process system, provided by the float is used to close the needle valve, while in the liquid
purge drain trap the float opens the valve.
i.e. gas release.
There are two types of drain traps: Rolls-Royce drain traps
Liquid purge drain trap • are designed to accept a variety of float mechanisms and needle
valves to suit a wide range of process fluids and operating pressures
Liquid purge drain traps are used to remove condensate from air receivers,
remove moisture from process systems to reduce corrosion, and to • are easily disassembled for service, or for replacement of the float
maintain a fixed liquid level in process tanks. In general, metal-to-metal mechanism
seats are used in liquid applications for durability. • are sealed by o-rings to ensure leak-tightness
• body, float and needle sizes can be varied to suit the process
Gas release drain trap
application
Gas release drain traps are used in liquid systems where the presence of
• at the client’s request, can undergo full functional testing under
pressurized gas is detrimental to the operation of process components, or
actual operating conditions prior to shipment to the client
where it could be dangerous (e.g. where the accumulated gas could be