Professional Documents
Culture Documents
• The High Voltage Electric Power Transmission Line Towers have to pre-assemble before
and after hot dip galvanized, to ensure all the details are finished as per design and
requirement, and in-site operation can go on smoothly.
• Raw material test → Cutting →Welding →Dimension verify →Hole drilling →trial assemble →
surface clean→ Galvanization or powder coating, painting →trial assemble → Recalibration
→Packaging
• Material
Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield
Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400, or any other standard by client
required.
• Galvanization
Hot dip galvanization in accordance with Chinese standard GB/T 13912-2002 and
American standard ASTM A123; or any other standard by client required.
VARIOUS TYPES OF TRANSMISSION TOWERS
1- TANGENT STRUCTURE TOWER - STEEL WEIGHT (Kg)
220 KV 500 KV
Single Circuit Double Circuit Single Circuit Double Circuit
4,582 6,895 12,247 19,006
220 KV 500 KV
Single Circuit Double Circuit Single Circuit Double Circuit
5,126 7,938 13,653 21,364
220 KV 500 KV
Single Circuit Double Circuit Single Circuit Double Circuit
6,895 10,342 18,053 28,531
220 KV 500 KV
Single Circuit Double Circuit Single Circuit Double Circuit
7,802 12,066 20,820 32,296
220 KV 500 KV
Single Circuit Double Circuit Single Circuit Double Circuit
10,070 15,876 26,943 41,821
2
VARIOUS TYPES OF TRANSMISSION TOWERS
3
VARIOUS TYPES OF TRANSMISSION TOWERS
4
VARIOUS TYPES OF TRANSMISSION TOWERS
5
VARIOUS TYPES OF TRANSMISSION TOWERS
220 KV