Professional Documents
Culture Documents
UNIT 2
PART – A
1. Write the principle and operations in milling, lathe, drilling, grinding, shaper, and planner
2. Characteristics of milling, lathe, drilling, grinding, shaper, planner (page – 627 - Tabulation)
3. Problems in Page – 636, 657, 672, 676, 740
4. Problems and troubleshooting in milling (680), lathe (648), drilling (659), grinding, shaper, and planner
PART – B
➢ Basic principles, constructions, machine descriptions and operations performed in – Turing, Milling,
Drilling, Grinding, shaping and planning
UNIT 3
PART A
1. How the primary combustion process/reactions occurs in oxy-acetylene gas welding (pg – 878)
2. Filler material in Gas welding (pg – 879)
3. Principle – Thermit welding, oxy-fuel gas welding (page – 881, 877)
4. Mention the types of welding in consumable and non-consumable welding
5. Transfer and non-transferred method in plasma welding (page- 884)
6. Principles of non-consumable welding?
7. Slag inclusions and porosity in welding (Page – 898)
8. How the welding process was selection (page – 906)
9. Types of solders and fluxes (page – 939)
10. Reflow soldering & wave soldering
11. Principle &Types of soldering (940) & brazing (937)
12. Solderability (942) and soldering applications (942)
13. Types of resistance welding (917)
PART B
1. Explain on Gas welding, types of flames and their applications? (877 – 882)
2. Electric Arc Welding – (Consumable Electrode) – (1) Gas Tungsten Arc (TIG), (2) Plasma (Transferred and non-
transferred) (882 – 885)
3. Electric Arc Welding – (Non-Consumable Electrode) – (1) SMAW, (2), Submerged Arc, (3) GMAW, (4) Flux
Cored, (5) Electro Gas, (6) Electro-slag (885-890)
6. Resistance Welding – (i) Spot, (ii) Seam, (iii) High frequency, (iv) Projection, (v) Flash, (vi) Stud welding, (vii)
Percussion. (917 to 924)
UNIT 4
PART A
1. Characteristics, process parameters of all UCM process- (Page – 771 Tabulation)
2. Process parameters of all UCM process
3. Bio-medical implant by ECM (777)
4. Functions of dielectric fluids in EDM (780)
5. Types of laser source for LBM (784)
6. Plasma Arc cutting (788)
PART B
UNIT 5
PART A