Professional Documents
Culture Documents
RENR8638-01
Disassembly and Assembly Section
2
Valve Mechanism Cover -
Remove and Install
SMCS Code: 1107-010
Removal Procedure
NOTICE 9 2
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened 3
component life.
g00951174
Illustration 137
NOTICE
Care must be taken to ensure that fluids are con- 2. Install the gasket and valve mechanism cover (1)
tained during performance of inspection, mainte- on the cylinder head.
nance, testing, adjusting, and repair of the product.
Be prepared to collect the fluid with suitable contain- 3. Install bolts (2). Tighten bolts (2) to a torque of
ers before opening any compartment or disassem- 9 N·m (80 lb in). Tighten bolts (2) in the sequence
bling any component containing fluids. that is shown in Illustration 137 .
Refer to Special Publication, NENG2500, 'Dealer 4. Connect breather tube (3) to valve mechanism
Service Tool Catalog' for tools and supplies suitable cover (1).
to collect and contain fluids on Cat products.
5. Install heat shields, if equipped.
Dispose of all fluids according to local regulations
and mandates. Note: The heat shields must be kept clean and free
from dust, oil, and paint.
105324833
Removal Procedure
Table 37
Required Tools
L. J