Professional Documents
Culture Documents
designed for
professionals
ESD and Precision tools
WHAT IS ESD?
Contents
ESD stands for ElectroStatic
Discharge. Pliers & Screwdrivers
ESD can cause unseen damage Cutters
to electronic components during
manufacture of electronic assemblies
The C.K ESD and Precision range is and equipment. If the damaged TRITON
component fails immediately, the
result can be a board that fails tests
designed for professionals who need and requires rework. This represents
Page 16-17
lost production and additional
hand tools for ultra fine work, where use manufacturing costs.
XONIC
of intricate components or tight access Worse than this, a component may
Page 17-18
are issues, for example in the electronics be partially damaged and weakened.
It may suffer a change or drift in
and fine mechanics industries. characteristics. It may remain within
specification, but fail later when in use
by a customer. It has been estimated
that 90% of damaged devices may
be discovered in this way.
The international standard IEC 61340-5-1 for protection of
electronic devices from electrostatic phenomena prohibits In manual assembly most ESD arises Page 6-8 Page 9-11 Page 18-20
the use of non-ESD (electrostatic dissipative) products in from charged personnel, if they are
Electrostatic Protected Areas (EPAs). C.K offers a wide variety not grounded.
of hand tools in compliance with these standards.
One of the main principles used to Trimmers Tweezers
protect ESD sensitive components
from ESD damage is to only handle
sensitive components in an ESD
Protected Area (EPA) under protected CARBOFIB
and controlled conditions. An EPA is
an area in which static electricity is Page 12
kept below levels that could cause
damage to electronic components
handled within the area. Page 20-21
2 3
ESD and Precision tools
Cutting Edges
The geometry of the cutting blade affects both the
cutting action and performance, and the lifetime
of the product. The sharper the angle, the fewer Mini Bevel
cutting forces are generated. Standard cut.
Highest cutting capacity.
Reduced cutting forces not only lead to a Robust and long lasting.
smoother and easier feeling cut, but also limits
potentially damaging pressure or ‘cutting shock’
Careful choice of Spot welded double to sensitive components. There is a trade-off
Hot drop forged blanks however. The blade will wear more quickly and the
raw materials Hot drop forging give maximum leaf springs cutting capacity will be lower.
We carefully select different strength to our tools through Spot welded springs mean that
high alloy carbon and chrome optimising the grain structure. no replacements or adjustments Full Flush
vanadium steels to match the are necessary. The action of Almost full flush cutting.
varying demands of each product. each pair of pliers will be Cutting shock slightly reduced.
A Mini Bevel cutter will have
consistent and controlled Wire definitions the longest life and the highest
with no maintenance costs. cutting capacity, but the cutting
Piano Wire Hardened spring steel 2200-2300 N/mm2 forces generated are the highest.
For applications where non-shock
Hard Wire Spring steel, steel nails 1600-1800 N/mm2
cutting is required the Extra Full
Medium Hard Wire Iron, nails 750-800 N/mm2 Flush cutter should be used. For
a compromise between cutting
Soft Wire Copper, aluminium 220-250 N/mm2 capacity, longevity and cutting
2
N/mm = tensile strength of wire
shock we recommend the Full Extra Full Flush
Flush cutter.
Perfectly flush cutting.
Suitable for non-shock cutting.
T3776EF 5
an attractive finish with no risk of
T3773DEF
T3782DEF
T3781DEF
T3766DEF
T3799DEF
T3772 1D
T3770 1D
T3786F 4
T3787DF
T3760DF
T3773DF
T3880DF
T3781DF
T3780DF
T3766DF
T3799DF
T3786DF
T3871DF
T3775EF
T3773EF
T3780EF
Precision box joint
T3772 1
T3796 5
T3779D
T3773D
T3782D
T3781D
T3772D
T3777D
T3767D
T3769D
T3770D
T3783D
T3771D
T3773F
T3880F
T3780F
T3778F
T3799F
T3776F
T3779
T3775
T3773
T3781
T3774
T3772
T3777
T3767
T3769
T3770
T3789
T3783
T3771
flaking chrome plate which could Key
damage circuits and components. The box joint construction of our
pliers and cutters is a specialised Mini Bevel cut
•
•
•
•
•
•
technique which physically slots
Full Flush cut (F)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
one half of the plier through the
other. Although more difficult to Extra Full Flush cut (EF)
•
•
•
manufacture, the doubly supported
pivot gives smooth and accurate
•
•
•
•
•
•
•
•
•
Smooth jaws
•
•
•
•
•
•
•
removes the requirement for
readjustment. For use in environments where
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ESD compliance is required
•
•
Tungsten-carbide cutting edges
•
•
•
•
•
•
•
•
Piano Ømm AWG
•
•
•
•
•
•
•
•
•
Medium/Hard Ømm AWG
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Soft Ømm AWG
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 5
ESD and Precision tools
are designed for T3779D 115 2.0/12 1.0/18 0.6/22 T3773D 115 1.5/15 1.0/18 0.4/26 T3781D 115 1.5/15 1.0/18 0.3/28 T3799DF 110 1.2/16 1.0/18 0.4/26
T3773DF 115 1.5/15 1.0/18 – T3781DF 115 1.5/15 1.0/18 – T3799DEF 110 1.0/18 0.8/20 –
use by electronics 3703D 6 piece 11 mm/
.433"
7.5 mm/
.295"
T3773DEF 115 1.5/15 0.8/20 – T3781DEF 115 1.5/15 0.8/20 –
pliers set 10 mm/.394" 125 mm/5"
10 mm/ 12 mm/ 6.5 mm/
10 mm/.394"
.256"
120 mm/4.3/4"
All of the products use the Contains: T3773D 115 Side Cutter, T3880DF 110
ergonomically designed, Side Cutter, T3766DF 110 Side Cutter, T3786DF 120
Oblique Tip Cutter, T3772D 120 Snipenose Plier,
dual-component Sensoplus T3770D 120 Flatnose Plier.
handle, are fully ESD compliant
and are constructed using
box-joint for longevity and
consistent performance. Key 3787D Side cutter
The cutting edges are induction Mini Bevel cut DIN EN 61340 5.1 & 5.2
3880D Side cutter 3780D Side cutter 3786D Oblique tip cutter
hardened for long life. Full Flush cut (F) Item Number
DIN EN 61340 5.1 & 5.2 DIN EN 61340 5.1 & 5.2
DIN EN 61340 5.1 & 5.2
Extra Full Flush cut (EF) T3787DF 115 1.8/13 0.8/20 0.4/26 Item Number
Item Number Item Number
Smooth jaws
11 mm/ 7.5 mm/ T3786DF 120 0.8/20 0.6/22 –
.433" .295" T3880DF 110 1.5/15 0.8/20 – T3780DF 110 1.5/15 0.8/20 –
Serrated jaws 5 mm/
10 mm/.394" 125 mm/5"
11 mm/ .197" 6.5 mm/
9 mm/ 6 mm/ 9 mm/ 6 mm/ .433" .256"
For use in environments where .354" .236" .354" .236"
ESD compliance is required Tungsten-carbide edges, relieved jaws. 9 mm/.354" 120 mm/4.3/4" 9 mm/.354"
20 mm/.788" 20 mm/.788" 130 mm/5.1/4"
120 mm/4.3/4"
electronics and aerospace industries. 13 mm/.512" 125 mm/5" Very slim, pointed jaws.
6 7
ESD and Precision tools
10 mm/
2.4 mm/
.095"
12.5 mm/ 20 mm/
.492" .788"
2 mm/
.079"
20 mm/.788"
10 mm/
.394"
1 mm/
.039"
6 mm/
.236"
130 mm/5.1/4"
on intricate work 3703 6 piece 14.5 mm/
.571"
9 mm/
.354"
2 mm/
.394" 1 mm/ 6 mm/
pliers set 20 mm/.788" 135 mm/5.1/4"
.079"
23 mm/.905"
.039" .236"
130 mm/5.1/4"
Bent nose. wherever a small,
Item Number
light, yet high quality T3703 6 piece pliers set
22 mm/.866"
.138"
130 mm/5.1/4" Item Number electronics and aerospace industries. 13 mm/.512" 115 mm/4.1/2"
Tungsten-carbide edges.
8 9
ESD and Precision tools
T3781 1.5/15 1.0/18 0.3/28 T3778F 1.6/14 1.2/16 0.5/24 T3786F 4 0.8/20 0.6/22 – T3767 T3789 T3796 5 0.1-0.8mm
5 mm/ a
11 mm/ .197" a=1 mm/.039"
11 mm/ 7.5 mm/ 11 mm/ 18 mm/ 6.5 mm/ 1.5 mm/ 12 mm/ 12 mm/ 32 mm/ 7 mm/
7.5 mm/ .433" 10 mm/ 10 mm/ 4.5 mm/ 7.5 mm/ .473"
.433" .295" .433" .709" .256" 2 mm/ 6.5 mm/ .059" .472" .295" 1.26" .276"
.295" .079" .394" .394" .177"
.250"
13 mm/.512" 115 mm/4.1/2" 9 mm/.354" 120 mm/4.3/4" 20 mm/.788" 20 mm/.788" 120 mm/4.3/4" 27 mm/1.063" 140 mm/5.3/4"
20 mm/.788" 20 mm/.788" 130 mm/5.3/4" 40 mm/1.575" 145 mm/5.3/4"
3780 Side cutter 3772 Snipe nose pliers 3783 Needle nose plier
3799 Oblique cutter 3769 Snipe nose plier
Item Number Item Number Item Number
Item Number Item Number
T3780F 1.5/15 0.8/20 – T3772 T3783
T3799F 1.2/16 1.0/18 0.4/26 T3769
T3780EF 1.5/15 0.6/22 – T3772 1
2 mm/ 11 mm/ 7.5 mm/
.433" 1.2 mm/
a a=1.2 mm/.047" .079" .047" .295"
10 mm/ 12 mm/ 6.5 mm/
.394" .473" 2 mm/ 10 mm/ 1 mm/ 6.5 mm/ 2.4 mm/ 12.5 mm/ 20 mm/ 7.5 mm/ 37 mm/1.459"
9 mm/ 6 mm/ .256" .394" .492" .788" 145 mm/5.3/4"
.354" .079" .039" .250" .095" .295"
.236"
10 mm/.394" 10 mm/.394" 110 mm/4.1/4" 33 mm/1.130" 33 mm/1.130" 145 mm/5.3/4"
23 mm/.905" 120 mm/4.3/4"
9 mm/.354" 110 mm/4.1/4"
10 11
ESD and Precision tools
Tweezers
Tweezers
Material code and properties CARBOFIB
The ranges of C.K Code Material Properties
tweezers have been CF Carbon-fibre tips and + Stainless.
SA-steel + Antimagnetic. 2343 Precision tweezers
developed to be + Acid resistant.
+ Conductive. Item Number
suitable for use in + Protecting sensitive surfaces. T2343 130mm SA MM.SA
+ Strong and durable. 2390 Positioning tweezers 2330 Precision tweezers
intricate tasks, and + Heat resistance up to 270˚C.
DIN EN 61340 5.1 & 5.2
Fine tips, straight.
Item Number
are manufactured Item Number
T2330 110mm SA 5B.SA
12 13
ESD and Precision tools
Tweezers
2360 Positioning tweezers 2336 Positioning tweezers 2302 Universal tweezers 2328 Radio tweezers
2317 Precision tweezers 2309 Universal tweezers
Item Number Item Number Item Number
Item Number Item Number
Item Number
T2336 120mm SA SM115.SA T2302 115mm C T2328 155mm C
T2360 120mm SA 2A.SA T2309 140mm C
T2317 105mm SA (18/10)
Grooved tips angled at 30˚. For cylindrical devices Fine, blunt tips, 2mm wide, finely milled inside. Fine, blunt tips, 2mm wide, bent. Finely milled inside.
Flat, round tips, straight. Blunt tips, 2mm wide, fine cross cut inside.
up to 1mm Ø. Fine, bent tips. Polished and black coated.
Polished and fine nickel plated. Polished and fine nickel plated.
14 15
ESD and Precision tools
Screwdrivers
TRITON XONIC
Screwdrivers Screwdrivers
4725ESD Slotted 4718ESD Torx® tamperproof 4880XESD Slotted
The range of Triton screwdriver screwdriver
4741ESD Screwdriver
The range of Xonic screwdriver
DIN EN 61340 5.1 & 5.2
ESD screwdrivers DIN ISO 2380, DIN EN 61340 5.1 & 5.2 DIN EN 61340 5.1 & 5.2
set ESD screwdrivers Item Number
Item Number Item Number
consists of ‘standard’ T4725ESD 03 3 1/8˝ 75 3˝ 0.5 0.02˝ 70 23/4˝ T4718ESD 08 T 08 3.0 1/8˝ 70 23/4˝ 80 31/8˝
Item Number consists of ‘miniature’ T4880XES08 0.8 1/32˝ 60 23/8˝ 0.20 .008˝ 97 313/16˝
T4741ESD 6 piece screwdriver set
sized tools for use T4725ESD 04 3 1/8˝ 100 4˝ 0.5 0.02˝ 80 31/8˝ T4718ESD 0820 T 08 3.0 1/8˝ 200 8˝ 80 31/8˝
For Slotted and Pozidrive® screws.
sized tools for use T4880XES12 1.2 3/64˝ 60 23/8˝ 0.25 .010˝ 97 313/16˝
T4725ESD 05
5 3/16˝
T4718ESD 10
T 09
90 31/2˝
Contains: T4725ESD 3.0 x 75, 3.0 x 100, 5.0 x 135,
T4723ESD PZ 0 x 60, PZ 1 x 80 PZ 2 x 100.
in areas where non- T4880XES18 1.8 5/64˝ 60 23/8˝ 0.30 .012˝ 97 313/16˝
ESD products are T4725ESD 10 5 3/16˝ 250 10˝ 0.8 0.031˝ 90 31/2˝ T4718ESD 1030 T 10 3.0 1/8˝ 300 12˝ 90 31/2˝ ESD products are T4880XES256 2.5 3/32˝ 60 23/8˝ 0.40 .016˝ 97 313/16˝
T4718ESD 1530
T 15
T 15
3.5 9/64˝ 80 31/8˝
90 31/2˝
prohibited. T4880XES310 3.0 1/8˝ 100 4˝ 0.50 .020˝ 97 313/16˝
4722ESD Phillips
screwdriver
DIN ISO 8764, DIN EN 61340 5.1 & 5.2
Item Number
4730ESD Screwdriver 4882XESD Phillips
T4722ESD 0 PH 0 3.5 9/64˝ 60 23/8˝ 70 23/4˝
set screwdriver
T4722ESD 1 PH 1 5.0 3/16˝ 80 31/8˝ 90 31/2˝ DIN EN 61340 5.1 & 5.2
Item Number
T4722ESD 13 PH 1 5.0 3/16˝ 300 12˝ 90 31/2˝ 4797ESD Screwdriver Item Number
T4730ESD 5 piece screwdriver set
T4722ESD 2 PH 2 6.0 7/32˝ 100 4˝ 100 4˝ set
T4882X000ES PH 000 2.5 3/32˝ 60 23/8˝ 97 313/16˝
For Torx® Tamperproof screws.
T4722ESD 23 PH 2 6.0 7/32˝ 300 12˝ 100 4˝ Item Number
Contains: T4718ESD T08, T09, T10, T15, T20. T4882X00ESD PH 00 2.5 3/32˝ 60 23/8˝ 97 313/16˝
T4797ESD 6 piece screwdriver set
T4882X0 ESD PH 0 3.0 1/8˝ 60 23/8˝ 97 313/16˝
16 17
ESD and Precision tools
Screwdrivers
Screwdrivers 4880X Slotted screwdriver
4877XESD Torx®
screwdriver
DIN EN 61340 5.1 & 5.2
The Precision range of Item Number
Item Number screwdrivers has been T4880X 12 2.5 3/32˝ 60 23/8˝ 0.20 0.008˝ 97 313/16˝
4884X Screwdriver set
T4877XESD04 T 04 2.5 3/32˝ 50 2˝ 97 313/16˝ designed with comfort T4880X 15 2.5 3/32˝ 60 23/8˝ 0.25 0.010˝ 97 313/16˝
4880X/5 Screwdriver set
T4877XESD05 T 05 2.5 3/32˝ 50 2˝ 97 313/16˝ 4883 Screwdriver set T4880X 18 2.5 3/32˝ 60 23/8˝ 0.30 0.012˝ 97 313/16˝ Item Number
T4877XESD07 T 07 3.5 9/64˝ 50 2˝ 97 313/16˝ T4883XESD 7 piece screwdriver set mind. The handle T4880X 257 2.5 3/32˝ 75 3˝ 0.40 0.016˝ 97 313/16˝
T4880X/5 5 piece screwdriver set
Slotted and Phillips screws.
Slotted and Phillips screws. Contains: T4880X 1.8 x 60, 3.0 x 100, 4.0 x 150.
T4877XESD08 T 08 3.5 9/64˝ 60 23/8˝ 97 313/16˝
Slotted and Phillips screws.
Contains: T4880XESD 2.5 x 75, 3.0 x 100, 3.0 x 150,
and hollow rotating T4880X 310
T4880X 315
3.0 1/82˝ 100 4˝
control in low torque T4880X 415 4.0 5/32˝ 150 6˝ 0.80 0.031˝ 97 313/16˝
applications.
18 19
ESD and Precision tools
4852P Screwdriver set special trimming tools. • Unequalled resistance to wear, T4856A 0.9 .035˝ PH 0 spec 1.8 .071˝ 2.6 .102˝
10 x better than metal, 100 x better
Item Number than plastic 3759 Wire stripper
Ceramic, the material of the • Total heat resistance of blades 4857 Trimming set
T4852P 4 piece screwdriver set Item Number
up to 1000˚C Plastic
Slotted screws.
future for tools of today: • Extremely low thermal conductivity 330012 0.25, 0.30, 0.40, 0.50, 0.60, 0.80mm
Item Number
Contains: 1.0 x 15, 1.6 x 20, 2.0 x 22, 2.4 x 25. extremely pure zirconium- • 100% rustproof 4 ceramic blades in 1 tool. Each 2 reversible inserts
Adjustable to 6 sizes.
• Highly resistant to all strong acids with each 2 ceramic blades. Transparent protection
oxide ceramic, non-static caps. Antistatic handle. With protection cap fitted, the
T4857 10 piece set
(other than Hydrofluoric)
and non-magnetic. • Anti-stick surface to prevent solder, blade inserts can be used as Mini-Alignment-Tools.
1.3mm Ø 3mm
20 21
ESD and Precision tools
Productwise, a free
and easy to use on-line
resource, available at
5911 Inspection mirror
950 Soldering iron www.productwise.co.uk,
3757 Wire stripper Item Number
22 23
Head Office: Carl Kammerling International’s
Distribution Partners:
United Kingdom
Carl Kammerling International Ltd. Republic of Ireland
Pwllheli, LL53 5LH Tel: 1-800818 660
Tel: +44 (0)1758 701070 Fax: 1-800818 659
Fax: +44 (0)1758 704777 email: dublin-sales@cki.uk.com
email: sales@cki.uk.com
Germany and Rest Of World
www.carlkammerling.com Carl Kämmerling GmbH & Co. KG
Bendahler Str. 110,
42285 Wuppertal
Tel: +49 (0) 202.89030
Fax: +49 (0) 202.890322
email: info@cki.de.com
USA
C.K North America Inc.
52 Eisenhower Lane North
Lombard Il 60148
Tel: +1 (866) 484.5943
Fax: +1 (630) 953.2686
email: ckusanick@aol.com
France
Tel: +33 (0) 810 000044
Fax: +33 (0) 810 000357
email: info@cki.de.com