Professional Documents
Culture Documents
Total 1 14800
Process flow
Decoiling→ feeding→ pressing and forming the shape→ measure the length→ cutting→
1.
Coil material Galvanized coil
Manual Decoiler
Voltage 380V,3Phase,50-60HZ
Mid-plate 30mm
Precision ±1MM
Cutting device
Blade material Gr12, Quenching
system
Screen Text/Touch
Language Chinese/English
Machine details
1. Feeding station: one set and with manual cutter
Function and feature: put the raw material (steel plate) on the plat to manufacture and
process, it can guarantee that the products are neat, parallel and everything is uniformity.
Please refer to the equipment regulation to know the function of locate angle iron.
In order to keep the product shape and precision, adopts welded sheet structure, motor
reducer drive, chain transmission, roller surfaces polishing, hard planting, heat treatment
and galvanization treatment. The polished surface and the heat treatment towards the
molds also can keep the molding plate surface smooth and not easy to be marked when it
is being stamped.
The sheet goes through the main roll forming machine to be formed the certain tile and
then goes into the forming part and be press the final tile sheet.
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil
tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic
It adopts the hydraulic drive and automatic location to decide the dimension and cut the
target products.
it can be adjusted. Computed mode has two modes: automatic and manual one. The
It contains liquid crystal screen, programmer, transformer for the electronic machines and
6. Manuel Decoiler
7.Out-put table: