Professional Documents
Culture Documents
Vis Mockup
Training
Table of Contents
Getting Started ................................................................................................................................ 3
Measuring ..................................................................................................................................... 10
Extent......................................................................................................................................... 10
Single Measures......................................................................................................................... 12
Double Measurements ............................................................................................................... 14
Mark-up......................................................................................................................................... 15
Part Manufacturing Information (PMI) ........................................................................................ 20
Compare........................................................................................................................................ 27
2
Getting Started
Start TeamCenter VisMockup By Selecting 'Teamcenter VisMockup' from the desktop Icon.
or
'Programs Æ UGS Teamcenter Æ Teamcenter Visualization Æ Teamcenter VisMockup'
from the Start Menu.
3
Select File Æ Open from the main menu and select:
C:\Program Files\UGS\Teamcenter 2005 SR1\Visualization\Examples\3D\fishing_reel.jt
4
Selecting Button Bars
Right Click on the Grey menu bar will display
this list of button options.
• File
• Printing
• 3D Navigation
• 3D Selection Filter
• 3D Standard Views
(scroll down the list)
• Project Workspace
• Navigator
5
The Buttons:
3D Standard Views
Up and Down Arrows spin the part over the top. Tumbles.
Left and Right Arrows spin the part around. Spins.
Circle Arrows rotate the part around. Clock.
The Cube with a trihedron snaps to an orientation. –Z takes you to the default view
6
3D Navigation
7
Project Workspace
The project workspace allows you to
Notice that after displaying the entire assembly, the structures of the subassemblies are
expanded. Parts can be turned on and off.
8
Fly to Part
Selecting a part in an assembly then 'Right-Clicking' allows you to select "Fly to Part"…
Fly to Part finds and zooms to the selected part on the screen.
9
Measuring
Extent
The 'Extent' of a part tells give you it's over all size.
10
2. Right Click on the part
3. Select Properties
4. Select Extent
11
Single Measures
Length and Diameter
1. Select Tools
2. Measurement
3. The Measurement menu appears
• The 'Point' button allows for selecting arbitrary points on the part
• The 'Vertex' button selects the corner
• The 'Edge' button selects an edge
• The 'Part' button selects the entire part
Measurement 'Type'
12
Single Measurements:
13
Double Measurements:
14
Mark-up
15
Markup Menu 'Draw' Options
• Line
o Straight
o Polyline
o Free Hand
• Text
• Ellipse
o Circles
• Polygon
o Shapes
• Rectangle
o Squares
16
Creating something 'Faxable'
17
The result will be an outline of the image that you can print and fax.
18
You can save outline to you hard drive
Select File
Then Save
to save the
outline to
your hard
disk.
The resulting file can then be inserted into an e-mail and sent out.
19
Part Manufacturing Information (PMI)
20
The reinforcement bar should open in VisMockup.
21
From the PMI Menu
Select 'Filter Configuration'
Set Filter
22
Select Toggle Single Entity Mode from the PMI menu.
23
Select an entity on the part. The part will re-orientate and the PMI associated with the part will
display.
24
Select Toggle Multiple Entity Mode from the main menu.
Click on the part and all the part's PMI will display.
25
Select the PMI tab from the Project Workspace
Note: The type and quality of PMI displayed will vary from part to part.
26
Compare
Open MP-1L24-010103-B1
27
Open MP-1L24-010103-B1 (ROOF)
28
Go Back to PDV
29
Select ToolsÆComparison from the Main
Menu.
30
Highlight a part in the Project workspace then select Comparison Æ 'Part Group 1' Æ Set
Highlight the other part in the Project Workspace then select Comparison Æ Part Group 2 Æ Set
31
Select Comparison Æ Compare Æ Tricolor Mapping from the Main Menu
32