Professional Documents
Culture Documents
Intro 5
Hot Rolled
Krakow (Poland) 6
Ostrava (Czech Republic) 7
Galati (Romania) 8
Skopje (Macedonia) 9
Heavy Plate
Batory (Poland) 10
Galati (Romania) 11
Cold Rolled
Sosnowiec, Krakow (Poland) 12
Valcovny Plechnu Frydek-Mistek (Czech Republic) 13
Nova Hut - Valcovna za studena (Czech Republic) 14
Skopje (Macedonia) 15
Galati (Romania) 16
Electro Galvanised
Krakow (Poland) 20
Organic Coated
Swietochlowice (Poland) 21
Skopje (Macedonia) 22
In this brochure you will find the offer overview of Mittal Steel’s
European units. You will be served by our network of sales
offices located throughout Europe. Our sales teams are always
ready and available to meet your specific requirements.
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11; DD12; DD13; DD14 * B Low carbon steel for cold bending
* after agreement
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1100 1200 1300 1400 1500
1.80 - 1.99
2.00 - 2.49
2.50 - 2.79
2.80 - 2.99
3.00 - 3.99
4.00 - 6.00
A B C D
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.8 - 6.0 730 - 1500 680 - 780 max. 12 EN 10051
Trimmed Edges 1.8 - 6.0 730 - 1500 680 - 780 max. 12 EN 10051
Pickled 1.8 - 4.0 730 - 1500 610 max. 25 EN 10051
Slit 1.8 - 6.0 120 - 600 700 - 780 max. 12 EN 10051
Patterned - Checkered 3.0 - 6.0 1000 - 1250 680 - 780 max. 12 DIN 59220
3 - Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11- DD14 A Low carbon steel for cold bending
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 1000 1100 1200 1300 1400 1500 1550
1.50 - 1.79
1.80 - 1.99
2.00 - 2.24
2.25 - 2.49
2.50 - 2.99
3.00 - 3.99
4.00 - 6.00
6.00 - 13.0
13.0 - 15.0
A B C D E
Hot rolled strip of width from 740 up to 980 mm are produced and supplied in limited quantity and after agreement with the production plant.
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.5 - 15.0 980 - 1550 762 max. 33 EN 10051+A1
Trimmed Edges 1.5 - 8.0 960 - 1530 600 or 762 max. 33 EN 10051+A1
Slit 1.5 - 8.0 20 - 750 600 or 762 max. 16 EN 10051+A1
Patterned - Teardrop 3.0 - 10.0 (12.0*) 980 - 1550 762 max. * DIN 59220
* after agreement
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 1.5 - 15.0 600 - 1550 1000 - 12000 max. 5.0 EN 10051+A1
Patterned - Teardrop 3.0 - 10.0 (12.0*) 600 - 1550 1000 - 12000 max. 5.0 DIN 59220
* after agreement
3 - Surface
Execution
Unpickled
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Description
EN 10111 DD11 - DD14 Low carbon steel for cold bending
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 1000 1050 1100 1150 1200 1250 1300 1400 1450 1500
1.50 - 1.79
1.80 - 1.99
2.00 - 2.29
2.30 - 2.49
2.50 - 2.99
3.00 - 12.0
Tensile Strength Steel Type S235 Tensile Strength Steel Type S355
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.5 - 12.0 1000 - 1500 760 - 850 12 - 24 EN 10051
Pickled 1.5 - 4.0 1000 - 1450 610 +/- 15 12 - 24 EN 10051
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 3.0 - 12.0 1000 - 1500 3000 - 6000 max. 10 EN 10051
3 - Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11 - DD13 A Low carbon steel for cold bending
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 800 900 1000 1100 1200 1300 1400 1500
1.80 - 1.99
2.00 - 2.24
2.25 - 2.49
2.50 - 2.99
3.00 - 3.99
4.00 - 5.99
6.00 - 12.0
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.8 - 12.0 800 - 1500 max. 762 max. 16 EN 10051
Pickled 1.8 - 5.5 800 - 1500 max. 762 max. 15 EN 10051
Patterned - Checkered 3.0 - 10.0 1000 - 1100 max. 762 max. 10 DIN 59220
Patterned - Teardrop 4.0 - 10.0 1000 - 1250 max. 762 max. 10 DIN 59220
2.2 - Sheets
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Cut-to-length max. 12 800 - 1250 2000 - 12000 2 - 10 EN 10051, EN 10029
max. 10 800 - 1500 2000 - 12000 2 - 10 EN 10051, EN 10029
max. 5 800 - 1400 2000 - 8000 2 - 10 EN 10051, EN 10029
Pickled 1.8 - 5.5 800 - 1500 2000 - 8000 2 - 10 EN 10051, EN 10029
Patterned - Checkered 3.0 - 10.0 1000 - 1100 2000 - 8000 2 - 10 DIN 59220
Patterned - Teardrop 4.0 - 10.0 1000 - 1250 2000 - 8000 2 - 10 DIN 59220
3 - Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
1 - Steel Grades
1.1 - Structural Steel
Standard Grade Description
EN 10025-2 S235JR - S235J2 (+AR, +N) Non-alloy structural steel
EN 10025-2 S275JR - S275J2 (+AR, +N) Non-alloy structural steel
EN 10025-2 S355JR - S355K2 (+AR, +N) Non-alloy structural steel
EN 10025-5 * S355J0W - S355K2W(+AR, +N) Structural steel with improved atmospheric corrosion resistance
( * ) min 200 Mg per order, without CE
2 - Dimensions
Thickness (mm) Width (mm) Length (mm) Tolerances
12.0 - 60.0 1500 - 3600 4000 - 12000 acc. to EN 10029
1 - Steel Grades
1.1 - Structural Steel
Standard Grade Description
EN 10025-2 S235JR - S2355K2, E295 (+AR, +N) Non-alloy structural steel
EN 10025-3 S235JRC - S355K2C (+AR, +N) Steel for cold forming
EN 10025-5 S235J0W - S355K2W (+N) Structural steel with improved corrosion resistance
2 - Dimensions
2.1 - Heavy Plates
Width (mm)
Thickness (mm) 1500 1600 1800 2000 2200 2400 2500 2600 2800 3000 3200 3500 3600 4000 Length
6.0 - 7.9 6.0 - 12.0
8.0 - 9.9 6.0 - 12.0
10.0 - 11.9 6.0 - 12.0
12.0 - 13.9 6.0 - 12.0
14.0 - 19.9 6.0 - 12.0
20.0 - 39.9 6.0 - 12.0
40.0 - 59.9 4.0 - 10.0
60.0 - 74.9 4.0 - 8.0
75.0 - 79.9 4.0 - 8.0
80.0 - 99.9 4.0 - 6.0
100.0 - 150.0 4.0 - 12.0
General heavy plates formats Boiler and commercial Quenched and tempered
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130, EN 10139 DC01, DC03, DC04, DC05 A Low carbon steel for cold forming
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1100 1200 1300 1400 1500
0.40 - 0.49 *
0.50 - 0.59
0.60 - 0.69
0.70 - 0.74
0.75 - 0.79
0.80 - 0.99
1.00 - 1.29
1.30 - 2.00
2.01 - 2.50
A B C D
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.5 700 - 1500 610 or 500 max. 15 EN 10130 / DIN 1541
Narrow Strip 0.15 - 4.0 10 - 410 500 max. 5 EN 10140
Slit Strip 0.60 - 2.5 100 - 680 610 max. 7 EN 10131
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 2.50 700 - 1500 1400 - 4000 max. 5 EN 10130 / DIN 1541
3 - Surface
3.1 - Surface Quality
Surface Type A (normal)
Surface Type B (improved - one sided)
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130+A1 DC01 - DC04 A Low carbon steel for cold forming
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 25 30 50 950 1000 1020
0.27 - 0.35
0.35 - 0.40
0.40 - 0.50
0.50 - 0.65
0.65 - 0.80
0.80 - 3.00
A B C D
Execution Thickness (mm) Width (mm) Inside Dia (mm) Outer Dia (mm) Weight (MT)
Wide Strip 0.40 - 3.00 600 - 1020 508 or 610 max. 1600 max. 15
Slit Strip 0.40 - 3.00 20 - 600 508 or 610 - max. 5
2.2 - Strips
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.80 - 5.00 20 - 600 - - EN 10131
3 - Surface
3.1 - Surface Quality
Surface Type A (normal)
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC04 A Low carbon steel for cold forming
DIN 1624 St 2 - St 4 A Low carbon steel for cold forming
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 7 9 21 32 250 300 520
0.09 - 0.14
0.14 - 0.20
0.20 - 0.40
0.40 - 1.20
1.20 - 4.00
4.00 - 5.00
A B C
Execution Thickness (mm) Width (mm) Inside Dia (mm) Outer Dia (mm) Weight (MT)
Narrow Strip 0.09 - 5.0 7 - 520 150 - 500 max. 1200 max. 5
Binding Strip 0.4 - 1.0 9 -32 280 - 350 max. 750 (1100)* max. 1 *
* oscillatory - multi layer
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Tolerances
Cut-to-length 0.8 - 5.0 20 - 520 1000 - 4000 EN 10140
3 - Surface
3.1 - Surface Finish
Roughness Symbol Ra (µm)
Bright b max. 0.6
Matt m 0.6 - 1.8
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC03 A Low carbon steel for cold forming
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 600 700 800 900 1000 1100 1200 1300
0.40 - 0.44
0.45 - 0.69
0.70 - 2.50
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.50 - 2.50 610 - 1300 610 +/- 20 max. 20 EN 10130 / DIN 1541
Slit Strip 0.50 - 2.50 32 - 610 610 +/- 20 max. 5.0 EN 10130 / DIN 1541
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length max. 2.50 610 - 1300 610 - 4880 max. 5.0 EN 10140
3 - Surface
3.1 - Surface Quality
Surface Type A (normal)
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC04 A Low carbon steel for cold forming
DIN 1623-1 St 12, RSt 13, RRSt 14 A Low carbon steel for cold forming
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 1000 1100 1200 1300 1400 1500
0.40 - 0.59
0.60 - 0.79
0.80 - 0.99
1.00 - 1.24
1.25 - 1.74
1.75 - 1.99
2.00 - 2.24
2.25 - 2.99
3.00 - 3.50
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.4 - 3.5 1000 - 1500 610 +/- 15 max. 16.0 EN 10130 / DIN 1541
Slit Strip 0.4 - 3.5 80 - 750 610 +/- 15 max. 7.0 EN 10130 / DIN 1541
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.4 - 3.5 1000 - 6000 1000 - 6000 max. 4.0 EN 10051
3 - Surface
3.1 - Surface Quality
Surface Type A (normal)
Surface Type B (improved - one sided)
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z, DX52D+Z, DX53D+Z* A Continuously hot dip galvanised low carbon steel for cold formimg
* after agreement
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1250 1500
0.40 - 0.44
0.45 - 0.74
0.75 - 1.50
1.51 - 2.50
A
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.50 700 - 1500 508 or 610 max. 15 EN 10143
Slit Strip 0.40 - 2.00 50 - 600 508 max. 15 EN 10143
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 2.50 700 - 1500 965 - 4000 up to 6000 * max. 5 EN 10143
* after agreement
3 - Surface
3.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350; Z450
* Galvanised 275 g/m2 double sided
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z, DX52D+Z A Continuously hot dip galvanised low carbon steel for cold formimg
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 600 800 900 1000 1100 1200 1250 1300
0.40 - 0.44
0.45 - 0.69
0.70 - 2.50
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.50 610 - 1300 610 +/- 20 max. 21 EN 10143
Slit Strip 0.50 - 2.50 32 - 610 611 +/- 20 max. 5 EN 10143
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length max. 2.50 610 - 1250 610 - 6000 max. 5 EN 10143
3 - Surface
3.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350
* Galvanised 275 g/m double sided
2
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z A Continuously hot dip galvanised low carbon steel for cold formimg
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 1000 1050 1100 1150 1200 1250 1300 1400
0.40 - 0.49
0.50 - 0.79
0.80 - 0.99
1.00 - 1.24
1.50 - 1.74
1.75 - 2.00
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.4 - 2.0 1000 - 1350 610 +/- 15 max. 18 EN 10143
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.4 - 2.0 1000 - 1350 2000 - 3000 max 4.0 EN 10143
3 - Surface
3.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350; Z450
* Galvanised 275 g/m2 double sided
1 - Steel Grades
1.1 - Electro Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10152 DC01+ZE, DC03+ZE, DC04+ZE, DC05+ZE * A Electro galvanised low carbon steel for cold forming
* after agreement
2 - Dimensions
2.1 - Electro Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1250 1500
0.50 - 0.54
0.55 - 0.74
0.75 - 1.50
A
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.50 - 1.50 700 - 1500 610 max. 30 EN 10131
Slit Strip 0.50 - 1.50 100 - 680 610 max. 7 EN 10131
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.50 - 1.50 700 - 1500 1400 - 3000 max. 5 EN 10131
* after agreement
3 - Surface
3.1 - Zinc Coating
One Sided Coating ZE25/0; ZE50/0; ZE75/0; ZE100/0
Two Sided Coating ZE25/25; ZE50/50; ZE75/75; ZE100/00
1 - Steel Grades
1.1 - Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10130 DC01, DC03, DC04 A Low carbon steel for cold forming
1.2 - Electro Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10152 DC01+ZE, DC03+ZE, DC04+ZE A Electro galvanised low carbon steel for cold forming
1.3 - Hot Dip Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10169+1/10142 DX51D+Z, DX52D+Z, DX53D+Z* A Hot dip galvanised low carbon steel for cold forming
* after agreement
2 - Dimensions
2.1 - Pre-Painted Cold Rolled Coils
Width (mm)
Thickness (mm) 740 800 900 1000 1250 1500
0.40 - 0.44
0.45 - 0.74
0.75 - 1.50
A Pre-Painted Cold Rolled Coils
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 1.50 740 - 1500 508 or 610 max. 15 EN 10143
Slit Strip 0.40 - 1.50 50 - 600 508 max. 15 EN 10143
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 1.50 740 - 1500 1000 - 4000 up to 6000* max. 5 EN 10143
* after agreement
3 - Coating
3.1. - Colour paint
Acc. RAL card from the supplier or samples from the customer
1 - Steel Grades
1.1 - Pre-Painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10130 DC01 A Low carbon steel for cold forming
1.2 - Hot Dip Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10169 - 1/10142 DX51D+Z A Hot dip galvanised low carbon steel for cold forming
2 - Dimensions
2.1 - Pre-Painted Cold Rolled Coils
Width (mm)
Thickness (mm) 610 800 900 1000 1100 1200 1250
0.40 - 1.50
A Pre-Painted Cold Rolled Coils
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 1.50 610 - 1250 508 or 610 max. 15 EN 10143
3 - Coating
3.1. Colour (paint)
Acc. RAL card. from the supplier or samples from the customer
Finland, Sweden, Denmark, France, Belgium and Luxembourg Spain and Portugal
Norway and Baltic states BP 3 Aribau, 195 2 Izq.
Veistämönaukio 1-3 Site industriel de Gandrange 08021 Barcelona
World Trade Center 57360 Amneville Spain
20100 Turku France T +34 93 414 3774
Finland T +33 3 8770 6689 F +34 93 201 5883
T +358 20 743 0940 F + 33 3 8770 7871 E antonio.alsina@mittalsteel.com
F +358 20 743 0941 E jean-pierre.daudigier@mittalsteel.com
E tom.lonnroth@mittalsteel.com
Head Office
Hofplein 20 No part of this publication may be reproduced
3032 AC Rotterdam or distributed in any form without the permission
The Netherlands of Mittal Steel, and no rights may be derived from
T +31 10 217 88 00 any of the contents.
F +31 10 217 88 88
E annemarie.vanreeven@mittalsteel.com Publisher:
Mittal Steel, Hofplein 20, 3032 AC Rotterdam
www.mittalsteel.com The Netherlands
Mittal Steel Europe
Hofplein 20
3032 AC Rotterdam
The Netherlands
T. +31 10 217 88 00
F. +31 10 217 88 88
www.mittalsteel.com