Professional Documents
Culture Documents
Product Range Series 8 Pitch 25.4 MM (1 In) : Modular Belts
Product Range Series 8 Pitch 25.4 MM (1 In) : Modular Belts
Series 8
Pitch 25.4 mm (1 in)
modular belts
ltfinder
Prolink Be The easy way
to find the
right plastic
lt
modular be
for your
conveyor.
finder.com
m.prolink-
Series 8
Straight running,
pitch 25.4 mm (1 in)
Belt types
Design characteristics
S8-0 SRS
high belt pull capacity
Closed, slip-resistant surface
– rigid module design makes belt
suitable for long conveyors
Special features
Width increments
In increments of 12.7 mm (0.5 in)
Hinge pins
Made of plastic (PBT, PP)
One-piece up to a belt width of 1200 mm (47 in)
Colours
Sprockets
PP WT, LG, BL 0 20 (1370) 7.1 (1.5)
POM BL, YL 0 40 (2740) 11.0 (2.3)
PXX-HC BK 0 20 (1370) 7.9 (1.6)
POM-CR AT 0 40 (2740) 11.0 (2.3)
PA-HT 0 30 (2056) 10.7 (2.2)
x
POM-HC AT 0 40 (2740) 11.0 (2.3)
POM-CR AT 0 40 (2740) 11.0 (2.3)
PXX-HC BK 0 20 (1370) 7.9 (1.6)
x
D0 b
Z11
Z12
Z15
Z19
b [mm] 25 25 25 25
PE 25 15 (1028) 6.7 (1.4) [in] (1) (1) (1) (1)
PP LG, BL 25 20 (1370) 6.4 (1.3)
D0 [mm] 91.6 99.7 124.1 156.8
POM BL 25 40 (2740) 9.7 (2.0)
[in] (3.6) (3.9) (4.9) (6.2)
PA-HT BK 25 30 (2056) 9.8 (2.0)
A [mm] 40.6 44.6 56.8 73.2
[in] (1.6) (1.8) (2.2) (2.9)
b Sprocket width
D0 Pitch circle diameter
Profile design A Distance centre of sprocket bore/
top edge support
Profiles (S8-0 PMU) Side guards
Height (h): 25.4 mm, 76.2 mm (1, 3 in) 25, 50, 75, 100 mm (1, 2, 3, 4 in) height The abbreviations and type key are explained
on the fold-out page at the back.
3
Type key*
Series ➀
Open area/Sprocket size ➁
Surface pattern ➂
Type ➃
Style ➄
Material ➅
Colour ➆
Height/Diameter/Bore size and style ➇
Length/Width ➈
Cap material and colour ➅ ➆
S2 - Z20 SPR POM WT RD1.5IN
S4.1 - 0 FLT PP BL
S5 - 45 GRT SML SG POM WT H50 W38
S11 - 45 GRT CW HD PA BL (POM BL/WT)
Legend
➀ Series ➃ Type ➅ Material ➆ Colour**
S1 … S13 A90 = Angle 90° to PA = Polyamide AT = Anthracite
conveying direction PA-HT = Polyamide BL = Blue
CM = Centre module high temperature BG = Beige
➁ Open area/Sprocket size SML = Side module, left PBT = Polybutylenterephthalate BK = Black
Percentage open area SMR = Side module, right PE = Polyethylene DB = Dark blue
Format: xx SMU = Side module, PE-MD = PE metal detectable GN = Green
E.g. 20 = 20 % universal/both sides POM = Polyoxymethylene LB = Light blue
For sprockets: number of teeth UM = Universal module (Polyacetal) LG = Light grey
Format: “Z”xx PMC = Profile module centre POM-CR = POM cut resistant OR = Orange
E.g. Z12 = 12 teeth PMU = Profile module POM-HC = POM highly conductive RE = Red
universal POM-MD = POM metal detectable TR = Transparent
PMU = Profile module PP = Polypropylene UC = Uncoloured
➂ Surface pattern lxx universal with indent PXX-HC = Self-extinguishing WT = White
BSL = Base module for slider xx = indent in mm highly conductive YL = Yellow
CTP = Cone top CLP = Clip material
FLT = Flat top (smooth) IDL = Idler POM-PE = POM side modules +
FRT(X) = Friction top (Design X) RI = High Grip insert PE centre modules ➇ Height/Diameter/
FRT-OG = FRT without SG = Module with POM-PP = POM side modules + Bore size and style
High Grip insert sideguard PP centre modules Height in mm
GRT = Grid top PIN = Coupling rod R1 = TPE 80 Shore A, PP Format: Hxxx
LRB = Lateral rib FPL = Finger plate R2 = EPDM 80 Shore A, Pin diameter in mm
MOD = Modified module shape SLI = Slider vulcanised Format: Dxxx
NCL = No cling SPR = Sprocket R3 = TPE 70 Shore A, PP Bore size: SQ (= square)
NPY = Inverted pyramid RTR = Retaining ring R4 = TPE 86 Shore A, PP or RD (= round)
NSK = Non skid TPL = Turning panel, left R5 = TPE 52 Shore A, PP either in mm or inches
NTP = Nub top (round studs) TPR = Turning panel, right R6 = TPE 63 Shore A, POM Format: SQxxMM or RDxxIN
RAT = Radius top CW = Clockwise R7 = TPE 50 Shore A, PP
RTP = Roller top CCW = Counterclockwise R8 = TPE 55 Shore A, PE
RRB = Raised rib SER = Self-extinguishing TPE
SRS = Slip-resistant surface SS = Stainless steel ➈ Length/Width
➄ Style HA = Supports the Pins Length in mm
BT = Bearing tap HACCP concept Format: Lxxx
G = Guided HW = High Wear resistant Module width in mm
RG = Reversed guided material Format: Wxxx
SG = Side guard
ST = Strong (S5)
DR = Double row sprocket * Not every product requires all characteristics (within the designation).
SP = Split sprocket If there is an irrelevant characteristic, this category will be ignored
F1, F2, = Collapse factor and replaced by the following one.
F3 … modules ** Please refer to the table of types for each series’ standard colours.
HD = Hold Down A number of other colours are available on request.
Colours can vary from the original due to the print, production
processes or material used.
Temperature ranges in °C Materials
0 +100
PE (Polyethylene)
–70
–60
–50
– 40
–30
–20
–10
+10
+20
+30
+40
+50
+60
+70
+80
+90
+110
+120
+130
+140
+150
+160
+170
– very good chemical resistance to acids
and alkalis
– very good release properties due to
PE –70/+65 low surface tension
PP +5/+100 – good friction and abrasion behaviour
POM – 45/+90 – extremely tough
PA-HT –30/+155 – low specific weight
PA –40/+120
PBT –40/+120 PP (Polypropylene)
– standard material for normal conveying
applications
– quite strong and stiff
Temperature ranges in °F – good dynamic capacity
– highly resistant to acids, alkalis, salts, alcohols
+32 +212
– low specific weight
– no risk of stress cracks forming
–100
–80
–60
– 40
–20
0
+20
+40
+60
+80
+100
+120
+140
+160
+180
+200
+220
+240
+260
+280
+300
+320
+340
POM (Polyoxymethylene/Polyacetal)
– very dimensionally stable
PE –94/+149 – very strong and stiff
PP + 41/+212 – high chemical resistance to organic solvents
POM – 49/+194 – lower drag
PA-HT –22/+311 – very durable material
PA – 40/+248 – hard, incision-resistant surface
PBT –40/+248
POM-CR (POM cut resistant)
– highly resistant to impact and incision
– easy to clean
Declaration of compliances/ – minimal ridge formation
– low risk of material delamination
HACCP types Certificates POM-HC (POM highly conductive)
– highly conductive material
Series 4.1, 6.1, 10 and 13 in particular sup FDA/EU – surface resistivity < 10 6 Ω
(according to specification)
port your HACCP concept with a number Siegling Prolink modular belts made – very strong and stiff
of hygiene-friendly characteristics. of PE, PP, POM and PA comply with – very good friction and abrasion properties
These features include: FDA 21 CFR as well as the (EU) 10/2011 POM-MD (POM metal detectable)
and (EC) 1935/2004 regulations regarding – material easily detected in metal detectors
– very strong and stiff
Easy-to-clean design the raw materials used and the migration – very good tribological properties
– with wide channels underneath the thresholds. (friction and abrasion levels)
module PA (Polyamide)
Halal – good wear resistance in dry applications
Excellent resistance to hydrolysis All Siegling POM Prolink modular belts – short-term temperature resistance
up to 135 °C (275 °F)
– resistant to hot water, cleaning agents are certified as being compliant with the – good fatigue resistance
and disinfectants Halal regulations by IFRC Asia (member PA-HT (Polyamide high temperature)
of the World Halal Council). – material reinforced with fibre glass
Good release properties – very high short-term temperature resistance
up to 180 °C (356 °F)
– beneficial when manufacturing Friction top – absorbs little water in humid environments
adhesive foodstuffs (minimal Siegling Prolink modular belts made of – very stiff
PE with Friction top material R7 and of – durable
product wastage)
PP with Friction top material R8 comply PXX-HC (self-extinguishing highly conductive
– product residue is easy to remove with FDA 21 CFR as well as the (EU)
material)
– flame retardant in line with DIN EN 13501-1
– easy-to-clean hinge design 10/2011 and (EC) 1935/2004 regulations (Cfl -s1 and DIN 4102 (B1)
regarding the raw materials used and the – surface resistivity < 10 6 Ω
– specially for use in the automotive industry
Blue a strong colour contrast migration thresholds with the exception
of contact to oily and fatty foodstuff. PBT (Polybutylenterephthalate)
– soiling is easier to identify – good wear resistance
– very good abrasive resistance
– suitable for usage in optical sorters – good strength and stiffness
– not recommend for use in hot water
– reduces light reflection, making
> 60 °C (140 °F)
working conditions better
Siegling – total belting solutions
10/16 · PV · Reproduction of text or parts thereof only with our approval. Subject to change.
Forbo Siegling service – anytime, anywhere