Professional Documents
Culture Documents
LYSAGHT
®
SELECT SEAM Series
St. Theresa’s Church
BATTEN
Wafer/Button Head
Fastener
18
Pan width
R3.0
84
27
cover width 300mm or 500mm
6 18
27
R1.0 inside 18
PRE-CURVE/
PITCH ROOF SRPUNG CURVE
Its simplicity only allows application in non-curved roofs. The simplicity of the pan design combined with in-line tension leveling provides
superior flatness and allows for greater workability on site.
7.6
.8
R3
95˚
25 24
R3 9
25
R1.0 inside
Cover width
320mm or 520mm
23
24
25
18
515mm
Pitch Roof
Note: • Please consult BlueSope Lysaght Singapore for pre-curved and tapered sheet profile.
• LYSAGHT® SELECT SEAM® II roof profile is not appicable for curved and tapered applications.
Residential Project,
Jalan Menarong
Table 1
Drag Load Per Square Metre of LYSAGHT® SELECT SEAM® and LYSAGHT® SELECT SEAM® II Profile
Panel Live and Dead Load (kN/m2)
Slope 0.75 1.00 1.50 2.00 2.50 3.00
5˚ 0.07 0.09 0.13 0.17 0.22 0.26
7˚ 0.09 0.12 0.18 0.24 0.30 0.37
10˚ 0.13 0.17 0.26 0.35 0.43 0.52
14˚ 0.18 0.24 0.36 0.48 0.60 0.73
18˚ 0.23 0.31 0.46 0.62 0.77 0.93
22˚ 0.28 0.37 0.56 0.75 0.94 1.12
26˚ 0.33 0.44 0.66 0.88 1.10 1.32
30˚ 0.38 0.50 0.75 1.00 1.25 1.50
34˚ 0.42 0.56 0.84 1.12 1.40 1.68
37˚ 0.45 0.60 0.90 1.20 1.51 1.81
40˚ 0.48 0.64 0.96 1.29 1.61 1.93
Residential Project,
SAFRA Clubhouse @ Boon Lay Cluster Apartment Housing
CLIPS at
600mm c/c
CONCEALED
CLIPS
Residential Project,
Cluster Terrace Houses
Residential Project,
Cluster Terrace Houses,
Upper Changi Road
OIL CANNING mirror will show a stretched and distorted image the lighter, more neutral colours.
The appearance of flatness depends on the of a person standing in front of it. A metal surface
distribution of the stresses across the surface of too, will distort the reflection of light if minor There are several precautions that can be taken
the metal sheet. These stresses will change as variations in and out of a level plane exist. The to reduce the oil canning effect. One is to use
temperature changes. The ability of a metal to appearance of flatness is very much dependent thicker material, because thicker metal tends to
transfer the effect of these stresses across the on surface reflectivity. It is also caused by mill oil-can less than thinner metal. An alternative is
surface without buckling or distorting out of plan, tolerances, variations in the substrate/decking to specify LYSAGHT® SELECT SEAM® trays with
will determine the level of “oil canning” that will and purlin alignment. Some paint finishes and stiffening ribs in the pan of the panels.
occur. metals that have high gloss index will exhibit
highly apparent distortion. The visual effects of Oil canning is an inherent characteristic
“Oil canning” is a metaphorical term used to oil canning can be exacerbated by different light and not a defect of a standing seam profile.
describe the tendency of flat surfaces to show conditions and orientation. Darker colours visually It is therefore not a cause for panel rejection.
variations in reflectivity. For example, a curved accentuate oil canning to a greater extent than